PXA: Drop csb226 and innokom boards (unmaintained)

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Robert Schwebel <robert@schwebel.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>

1 files changed, 0 insertions, 190 deletions

diff --git a/board/innokom/innokom.c b/board/innokom/innokom.c
deleted file mode 100644
index 22de7e3405..0000000000
--- a/board/innokom/innokom.c
+++ /dev/null
@@ -1,190 +0,0 @@
-/*
- * (C) Copyright 2002
- * Robert Schwebel, Pengutronix, r.schwebel@pengutronix.de
- * Kyle Harris, Nexus Technologies, Inc., kharris@nexus-tech.net
- * Marius Groeger, Sysgo Real-Time Solutions GmbH, mgroeger@sysgo.de
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/mach-types.h>
-#include <asm/io.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifdef CONFIG_SHOW_BOOT_PROGRESS
-# define SHOW_BOOT_PROGRESS(arg)        show_boot_progress(arg)
-#else
-# define SHOW_BOOT_PROGRESS(arg)
-#endif
-
-/**
- * i2c_init_board - reset i2c bus. When the board is powercycled during a
- * bus transfer it might hang; for details see doc/I2C_Edge_Conditions.
- * The Innokom board has GPIO70 connected to SCLK which can be toggled
- * until all chips think that their current cycles are finished.
- */
-int i2c_init_board(void)
-{
-	int i;
-
-	/* set gpio pin low _before_ we change direction to output          */
-	writel(GPIO_bit(70), GPCR(70));
-
-	/* now toggle between output=low and high-impedance                 */
-	for (i = 0; i < 20; i++) {
-		writel(readl(GPDR(70)) | GPIO_bit(70), GPDR(70));  /* output */
-		udelay(10);
-		writel(readl(GPDR(70)) & ~GPIO_bit(70), GPDR(70)); /* input  */
-		udelay(10);
-	}
-
-	return 0;
-}
-
-
-/**
- * misc_init_r: - misc initialisation routines
- */
-
-int misc_init_r(void)
-{
-	char *str;
-
-	/* determine if the software update key is pressed during startup   */
-	if (readl(GPLR0) & 0x00000800) {
-		printf("using bootcmd_normal (sw-update button not pressed)\n");
-		str = getenv("bootcmd_normal");
-	} else {
-		printf("using bootcmd_update (sw-update button pressed)\n");
-		str = getenv("bootcmd_update");
-	}
-
-	setenv("bootcmd",str);
-
-	return 0;
-}
-
-
-/**
- * board_init: - setup some data structures
- *
- * @return: 0 in case of success
- */
-
-int board_init (void)
-{
-	/* We have RAM, disable cache */
-	dcache_disable();
-	icache_disable();
-
-	gd->bd->bi_arch_number = MACH_TYPE_INNOKOM;
-	gd->bd->bi_boot_params = 0xa0000100;
-	gd->bd->bi_baudrate = CONFIG_BAUDRATE;
-
-	return 0;
-}
-
-extern void pxa_dram_init(void);
-int dram_init(void)
-{
-	pxa_dram_init();
-	gd->ram_size = PHYS_SDRAM_1_SIZE;
-	return 0;
-}
-
-void dram_init_banksize(void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-}
-
-/**
- * innokom_set_led: - switch LEDs on or off
- *
- * @param led:   LED to switch (0,1,2)
- * @param state: switch on (1) or off (0)
- */
-
-void innokom_set_led(int led, int state)
-{
-	switch(led) {
-/*
-		case 0: if (state==1) {
-				GPCR0 |= CSB226_USER_LED0;
-			} else if (state==0) {
-				GPSR0 |= CSB226_USER_LED0;
-			}
-			break;
-
-		case 1: if (state==1) {
-				GPCR0 |= CSB226_USER_LED1;
-			} else if (state==0) {
-				GPSR0 |= CSB226_USER_LED1;
-			}
-			break;
-
-		case 2: if (state==1) {
-				GPCR0 |= CSB226_USER_LED2;
-			} else if (state==0) {
-				GPSR0 |= CSB226_USER_LED2;
-			}
-			break;
-*/
-	}
-
-	return;
-}
-
-
-/**
- * show_boot_progress: - indicate state of the boot process
- *
- * @param status: Status number - see README for details.
- *
- * The CSB226 does only have 3 LEDs, so we switch them on at the most
- * important states (1, 5, 15).
- */
-
-void show_boot_progress (int status)
-{
-	switch(status) {
-/*
-		case  1: csb226_set_led(0,1); break;
-		case  5: csb226_set_led(1,1); break;
-		case 15: csb226_set_led(2,1); break;
-*/
-	}
-
-	return;
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
-	int rc = 0;
-#ifdef CONFIG_SMC91111
-	rc = smc91111_initialize(0, CONFIG_SMC91111_BASE);
-#endif
-	return rc;
-}
-#endif