summaryrefslogtreecommitdiffstats
path: root/board/freescale
diff options
context:
space:
mode:
authorWolfgang Denk <wd@denx.de>2011-10-28 00:15:19 +0200
committerWolfgang Denk <wd@denx.de>2011-10-28 00:15:19 +0200
commit87a5d601031652293ec4b729fdb7ee01bbd940a8 (patch)
tree91ede3ee45b228736c1876a700024782d7bc2032 /board/freescale
parent606a76f8ef479e42ae4d06f8f3ce87e9a1c72acf (diff)
parent37fc0ed268dc5acacd3a83adafa26eb1a84e90af (diff)
downloadblackbird-obmc-uboot-87a5d601031652293ec4b729fdb7ee01bbd940a8.tar.gz
blackbird-obmc-uboot-87a5d601031652293ec4b729fdb7ee01bbd940a8.zip
Merge branch 'master' of git://git.denx.de/u-boot-arm
* 'master' of git://git.denx.de/u-boot-arm: ARM: Add Calxeda Highbank platform dkb: make mmc command as default enabled Marvell: dkb: add mmc support ARM: pantheon: add mmc definition davinci: remove config.mk file from the sources ARM:AM33XX: Add support for TI AM335X EVM ARM:AM33XX: Added timer support ARM:AM33XX: Add emif/ddr support ARM:AM33XX: Add clock definitions ARM:AM33XX: Added support for AM33xx omap3/emif4: fix registers definition davinci: remove obsolete macro CONFIG_EMAC_MDIO_PHY_NUM davinci: emac: add support for more than 1 PHYs davinci: emac: add new features to autonegotiate for EMAC da850evm: Move LPSC configuration to board_early_init_f() omap4_panda: Build in cmd_gpio support on panda omap: Don't use gpio_free to change direction to input mmc: omap: Allow OMAP_HSMMC[23]_BASE to be unset OMAP3: overo : Add environment variable optargs to bootargs OMAP3: overo: Move ethernet CS4 configuration to execute based on board id OMAP3: overo : Use ttyO2 instead of ttyS2. da830: add support for NAND boot mode dm36x: revert cache disable patch dm644X: revert cache disable patch devkit8000: Add malloc space omap: spl: fix build break due to changes in FAT OMAP3 SPL: Provide weak omap_rev_string omap: beagle: Use ubifs instead of jffs2 for nand boot omap: overo: Disable pull-ups on camera PCLK, HS and VS signals omap: overo: Configure mux for gpio10 SPL: Add DMA library omap3: Add interface for omap3 DMA omap3: Add DMA register accessors omap3: Add Base register for DMA arm, davinci: add missing LSPC define for MMC/SD1 U-Boot/SPL: omap4: Make ddr pre-calculated timings as default. DaVinci: correct MDSTAT.STATE mask omap4: splitting padconfs into common, 4430 and 4460 omap4: adding revision detection for 4460 ES1.1 omap4: replacing OMAP4_CONTROL with OMAP4430_CONTROL gplug: fixed build error as a result of code cleanup patch kirkwood_spi: add dummy spi_init() gpio: mvmfp: reduce include platform file ARM: orion5x: reduce dependence of including platform file serial: reduce include platform file for marvell chip ARM: kirkwood: reduce dependence of including platform file ARM: armada100: reduce dependence of including platform file ARM: pantheon: reduce dependence of including platform file Armada100: Add env storage support for Marvell gplugD Armada100: Add SPI flash support for Marvell gplugD Armada100: Add SPI support for Marvell gplugD SPI: Add SPI driver support for Marvell Armada100 dreamplug: initial board support. imx: fix coding style misc: pmic: drop old Freescale's pmic driver MX31: mx31pdk: use new pmic driver MX31: mx31ads: use new pmic driver MX31: mx31_litekit: use new pmic driver MX5: mx53evk: use new pmic driver MX5: mx51evk: use new pmic driver MX35: mx35pdk: use new pmic driver misc: pmic: addI2C support to pmic_fsl driver misc: pmic: use I2C_SET_BUS in pmic I2C MX5: efikamx/efikasb: use new pmic driver MX3: qong: use new pmic driver RTC: Switch mc13783 to generic pmic code MX5: vision2: use new pmic driver misc: pmic: Freescale PMIC switches to generic PMIC driver misc:pmic:samsung Enable PMIC driver at GONI target misc:pmic:max8998 MAX8998 support at a new PMIC driver. misc:pmic:core New generic PMIC driver mx31pdk: Remove unneeded config mx31: provide readable WEIM CS accessor MX51: vision2: Set global macros I2C: Add i2c_get/set_speed() to mxc_i2c.c ARM: Update mach-types devkit8000: Add config to enable SPL MMC boot devkit8000: protect board_mmc_init arm, post: add missing post_time_ms for arm cosmetic, post: Codingstyle cleanup arm, logbuffer: make it compileclean tegra2: Enable MMC for Seaboard tegra2: Add more pinmux functions tegra2: Rename PIN_ to PINGRP_ tegra2: Add more clock functions tegra2: Clean up board code a little tegra2: Rename CLOCK_PLL_ID to CLOCK_ID
Diffstat (limited to 'board/freescale')
-rw-r--r--board/freescale/mx31ads/mx31ads.c16
-rw-r--r--board/freescale/mx31pdk/mx31pdk.c14
-rw-r--r--board/freescale/mx35pdk/mx35pdk.c18
-rw-r--r--board/freescale/mx51evk/mx51evk.c47
-rw-r--r--board/freescale/mx53evk/mx53evk.c17
5 files changed, 72 insertions, 40 deletions
diff --git a/board/freescale/mx31ads/mx31ads.c b/board/freescale/mx31ads/mx31ads.c
index 4dd1e63a83..1def0d9284 100644
--- a/board/freescale/mx31ads/mx31ads.c
+++ b/board/freescale/mx31ads/mx31ads.c
@@ -25,6 +25,7 @@
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/imx-regs.h>
+#include <asm/arch/sys_proto.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -48,9 +49,16 @@ int board_early_init_f(void)
* the only non-zero field "Wait State Control" is set to half the
* default value.
*/
- __REG(CSCR_U(0)) = 0x00000f00;
- __REG(CSCR_L(0)) = 0x10000D03;
- __REG(CSCR_A(0)) = 0x00720900;
+ static const struct mxc_weimcs cs0 = {
+ /* sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */
+ CSCR_U(0, 0, 0, 0, 0, 0, 0, 0, 0, 15, 0, 0, 0),
+ /* oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */
+ CSCR_L(1, 0, 0, 0, 0, 1, 5, 0, 0, 0, 1, 1),
+ /* ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/
+ CSCR_A(0, 0, 7, 2, 0, 0, 2, 1, 0, 0, 0, 0, 0, 0)
+ };
+
+ mxc_setup_weimcs(0, &cs0);
/* setup pins for UART1 */
mx31_gpio_mux(MUX_RXD1__UART1_RXD_MUX);
@@ -104,7 +112,7 @@ int board_init(void)
return 0;
}
-int checkboard (void)
+int checkboard(void)
{
printf("Board: MX31ADS\n");
return 0;
diff --git a/board/freescale/mx31pdk/mx31pdk.c b/board/freescale/mx31pdk/mx31pdk.c
index 276d45153a..0e7e0ce347 100644
--- a/board/freescale/mx31pdk/mx31pdk.c
+++ b/board/freescale/mx31pdk/mx31pdk.c
@@ -28,6 +28,7 @@
#include <netdev.h>
#include <asm/arch/clock.h>
#include <asm/arch/imx-regs.h>
+#include <asm/arch/sys_proto.h>
#include <watchdog.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -50,9 +51,16 @@ int dram_init(void)
int board_early_init_f(void)
{
/* CS5: CPLD incl. network controller */
- __REG(CSCR_U(5)) = 0x0000d843;
- __REG(CSCR_L(5)) = 0x22252521;
- __REG(CSCR_A(5)) = 0x22220a00;
+ static const struct mxc_weimcs cs5 = {
+ /* sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */
+ CSCR_U(0, 0, 0, 0, 0, 0, 0, 0, 3, 24, 0, 4, 3),
+ /* oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */
+ CSCR_L(2, 2, 2, 5, 2, 0, 5, 2, 0, 0, 0, 1),
+ /* ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/
+ CSCR_A(2, 2, 2, 2, 0, 0, 2, 2, 0, 0, 0, 0, 0, 0)
+ };
+
+ mxc_setup_weimcs(5, &cs5);
/* Setup UART1 and SPI2 pins */
mx31_uart1_hw_init();
diff --git a/board/freescale/mx35pdk/mx35pdk.c b/board/freescale/mx35pdk/mx35pdk.c
index 2ce6e8e340..a5b51a0aa0 100644
--- a/board/freescale/mx35pdk/mx35pdk.c
+++ b/board/freescale/mx35pdk/mx35pdk.c
@@ -30,6 +30,7 @@
#include <asm/arch/mx35_pins.h>
#include <asm/arch/iomux.h>
#include <i2c.h>
+#include <pmic.h>
#include <fsl_pmic.h>
#include <mc9sdz60.h>
#include <mc13892.h>
@@ -202,9 +203,10 @@ int board_init(void)
static inline int pmic_detect(void)
{
- int id;
+ unsigned int id;
+ struct pmic *p = get_pmic();
- id = pmic_reg_read(REG_IDENTIFICATION);
+ pmic_reg_read(p, REG_IDENTIFICATION, &id);
id = (id >> 6) & 0x7;
if (id == 0x7)
@@ -225,15 +227,19 @@ int board_late_init(void)
{
u8 val;
u32 pmic_val;
+ struct pmic *p;
+ pmic_init();
if (pmic_detect()) {
+ p = get_pmic();
mxc_request_iomux(MX35_PIN_WATCHDOG_RST, MUX_CONFIG_SION |
MUX_CONFIG_ALT1);
- pmic_val = pmic_reg_read(REG_SETTING_0);
- pmic_reg_write(REG_SETTING_0, pmic_val | VO_1_30V | VO_1_50V);
- pmic_val = pmic_reg_read(REG_MODE_0);
- pmic_reg_write(REG_MODE_0, pmic_val | VGEN3EN);
+ pmic_reg_read(p, REG_SETTING_0, &pmic_val);
+ pmic_reg_write(p, REG_SETTING_0,
+ pmic_val | VO_1_30V | VO_1_50V);
+ pmic_reg_read(p, REG_MODE_0, &pmic_val);
+ pmic_reg_write(p, REG_MODE_0, pmic_val | VGEN3EN);
mxc_request_iomux(MX35_PIN_COMPARE, MUX_CONFIG_GPIO);
mxc_iomux_set_input(MUX_IN_GPIO1_IN_5, INPUT_CTL_PATH0);
diff --git a/board/freescale/mx51evk/mx51evk.c b/board/freescale/mx51evk/mx51evk.c
index f998610577..2a0dad021e 100644
--- a/board/freescale/mx51evk/mx51evk.c
+++ b/board/freescale/mx51evk/mx51evk.c
@@ -32,6 +32,7 @@
#include <i2c.h>
#include <mmc.h>
#include <fsl_esdhc.h>
+#include <pmic.h>
#include <fsl_pmic.h>
#include <mc13892.h>
@@ -182,34 +183,38 @@ static void power_init(void)
{
unsigned int val;
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)MXC_CCM_BASE;
+ struct pmic *p;
+
+ pmic_init();
+ p = get_pmic();
/* Write needed to Power Gate 2 register */
- val = pmic_reg_read(REG_POWER_MISC);
+ pmic_reg_read(p, REG_POWER_MISC, &val);
val &= ~PWGT2SPIEN;
- pmic_reg_write(REG_POWER_MISC, val);
+ pmic_reg_write(p, REG_POWER_MISC, val);
/* Externally powered */
- val = pmic_reg_read(REG_CHARGE);
+ pmic_reg_read(p, REG_CHARGE, &val);
val |= ICHRG0 | ICHRG1 | ICHRG2 | ICHRG3 | CHGAUTOB;
- pmic_reg_write(REG_CHARGE, val);
+ pmic_reg_write(p, REG_CHARGE, val);
/* power up the system first */
- pmic_reg_write(REG_POWER_MISC, PWUP);
+ pmic_reg_write(p, REG_POWER_MISC, PWUP);
/* Set core voltage to 1.1V */
- val = pmic_reg_read(REG_SW_0);
+ pmic_reg_read(p, REG_SW_0, &val);
val = (val & ~SWx_VOLT_MASK) | SWx_1_100V;
- pmic_reg_write(REG_SW_0, val);
+ pmic_reg_write(p, REG_SW_0, val);
/* Setup VCC (SW2) to 1.25 */
- val = pmic_reg_read(REG_SW_1);
+ pmic_reg_read(p, REG_SW_1, &val);
val = (val & ~SWx_VOLT_MASK) | SWx_1_250V;
- pmic_reg_write(REG_SW_1, val);
+ pmic_reg_write(p, REG_SW_1, val);
/* Setup 1V2_DIG1 (SW3) to 1.25 */
- val = pmic_reg_read(REG_SW_2);
+ pmic_reg_read(p, REG_SW_2, &val);
val = (val & ~SWx_VOLT_MASK) | SWx_1_250V;
- pmic_reg_write(REG_SW_2, val);
+ pmic_reg_write(p, REG_SW_2, val);
udelay(50);
/* Raise the core frequency to 800MHz */
@@ -217,36 +222,36 @@ static void power_init(void)
/* Set switchers in Auto in NORMAL mode & STANDBY mode */
/* Setup the switcher mode for SW1 & SW2*/
- val = pmic_reg_read(REG_SW_4);
+ pmic_reg_read(p, REG_SW_4, &val);
val = (val & ~((SWMODE_MASK << SWMODE1_SHIFT) |
(SWMODE_MASK << SWMODE2_SHIFT)));
val |= (SWMODE_AUTO_AUTO << SWMODE1_SHIFT) |
(SWMODE_AUTO_AUTO << SWMODE2_SHIFT);
- pmic_reg_write(REG_SW_4, val);
+ pmic_reg_write(p, REG_SW_4, val);
/* Setup the switcher mode for SW3 & SW4 */
- val = pmic_reg_read(REG_SW_5);
+ pmic_reg_read(p, REG_SW_5, &val);
val = (val & ~((SWMODE_MASK << SWMODE3_SHIFT) |
(SWMODE_MASK << SWMODE4_SHIFT)));
val |= (SWMODE_AUTO_AUTO << SWMODE3_SHIFT) |
(SWMODE_AUTO_AUTO << SWMODE4_SHIFT);
- pmic_reg_write(REG_SW_5, val);
+ pmic_reg_write(p, REG_SW_5, val);
/* Set VDIG to 1.65V, VGEN3 to 1.8V, VCAM to 2.6V */
- val = pmic_reg_read(REG_SETTING_0);
+ pmic_reg_read(p, REG_SETTING_0, &val);
val &= ~(VCAM_MASK | VGEN3_MASK | VDIG_MASK);
val |= VDIG_1_65 | VGEN3_1_8 | VCAM_2_6;
- pmic_reg_write(REG_SETTING_0, val);
+ pmic_reg_write(p, REG_SETTING_0, val);
/* Set VVIDEO to 2.775V, VAUDIO to 3V, VSD to 3.15V */
- val = pmic_reg_read(REG_SETTING_1);
+ pmic_reg_read(p, REG_SETTING_1, &val);
val &= ~(VVIDEO_MASK | VSD_MASK | VAUDIO_MASK);
val |= VSD_3_15 | VAUDIO_3_0 | VVIDEO_2_775;
- pmic_reg_write(REG_SETTING_1, val);
+ pmic_reg_write(p, REG_SETTING_1, val);
/* Configure VGEN3 and VCAM regulators to use external PNP */
val = VGEN3CONFIG | VCAMCONFIG;
- pmic_reg_write(REG_MODE_1, val);
+ pmic_reg_write(p, REG_MODE_1, val);
udelay(200);
gpio_direction_output(46, 0);
@@ -257,7 +262,7 @@ static void power_init(void)
/* Enable VGEN3, VCAM, VAUDIO, VVIDEO, VSD regulators */
val = VGEN3EN | VGEN3CONFIG | VCAMEN | VCAMCONFIG |
VVIDEOEN | VAUDIOEN | VSDEN;
- pmic_reg_write(REG_MODE_1, val);
+ pmic_reg_write(p, REG_MODE_1, val);
udelay(500);
diff --git a/board/freescale/mx53evk/mx53evk.c b/board/freescale/mx53evk/mx53evk.c
index fd821c0b1d..eab9c5f7d4 100644
--- a/board/freescale/mx53evk/mx53evk.c
+++ b/board/freescale/mx53evk/mx53evk.c
@@ -32,6 +32,7 @@
#include <i2c.h>
#include <mmc.h>
#include <fsl_esdhc.h>
+#include <pmic.h>
#include <fsl_pmic.h>
#include <asm/gpio.h>
#include <mc13892.h>
@@ -124,12 +125,16 @@ static void setup_i2c(unsigned int port_number)
void power_init(void)
{
unsigned int val;
+ struct pmic *p;
+
+ pmic_init();
+ p = get_pmic();
/* Set VDDA to 1.25V */
- val = pmic_reg_read(REG_SW_2);
+ pmic_reg_read(p, REG_SW_2, &val);
val &= ~SWX_OUT_MASK;
val |= SWX_OUT_1_25;
- pmic_reg_write(REG_SW_2, val);
+ pmic_reg_write(p, REG_SW_2, val);
/*
* Need increase VCC and VDDA to 1.3V
@@ -137,16 +142,16 @@ void power_init(void)
*/
if (is_soc_rev(CHIP_REV_2_0) == 0) {
/* Set VCC to 1.3V for TO2 */
- val = pmic_reg_read(REG_SW_1);
+ pmic_reg_read(p, REG_SW_1, &val);
val &= ~SWX_OUT_MASK;
val |= SWX_OUT_1_30;
- pmic_reg_write(REG_SW_1, val);
+ pmic_reg_write(p, REG_SW_1, val);
/* Set VDDA to 1.3V for TO2 */
- val = pmic_reg_read(REG_SW_2);
+ pmic_reg_read(p, REG_SW_2, &val);
val &= ~SWX_OUT_MASK;
val |= SWX_OUT_1_30;
- pmic_reg_write(REG_SW_2, val);
+ pmic_reg_write(p, REG_SW_2, val);
}
}
OpenPOWER on IntegriCloud