Added M5329AFEE and M5329BFEE Platforms

Added board/freescale/m5329evb, cpu/mcf532x, drivers/net,
drivers/serial,  immap_5329.h, m5329.h, mcfrtc.h,
include/configs/M5329EVB.h, lib_m68k/interrupts.c, and
rtc/mcfrtc.c

Modified CREDITS, MAKEFILE, Makefile, README, common/cmd_bdinfo.c,
common/cmd_mii.c, include/asm-m68k/byteorder.h, include/asm-m68k/fec.h,
include/asm-m68k/io.h, include/asm-m68k/mcftimer.h,
include/asm-m68k/mcfuart.h, include/asm-m68k/ptrace.h,
include/asm-m68k/u-boot.h, lib_m68k/Makefile, lib_m68k/board.c,
lib_m68k/time.c, net/eth.c and rtc/Makefile

Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

5 files changed, 1232 insertions, 0 deletions

diff --git a/board/freescale/m5329evb/Makefile b/board/freescale/m5329evb/Makefile
new file mode 100644
index 0000000000..f94ee9d139
--- /dev/null
+++ b/board/freescale/m5329evb/Makefile
@@ -0,0 +1,44 @@
+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	= $(BOARD).o flash.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/freescale/m5329evb/config.mk b/board/freescale/m5329evb/config.mk
new file mode 100644
index 0000000000..ce014edca8
--- /dev/null
+++ b/board/freescale/m5329evb/config.mk
@@ -0,0 +1,25 @@
+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+TEXT_BASE = 0
diff --git a/board/freescale/m5329evb/flash.c b/board/freescale/m5329evb/flash.c
new file mode 100644
index 0000000000..7d3b0e84d2
--- /dev/null
+++ b/board/freescale/m5329evb/flash.c
@@ -0,0 +1,643 @@
+/*
+ * (C) Copyright 2000-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#ifndef CFG_FLASH_CFI
+
+typedef unsigned short FLASH_PORT_WIDTH;
+typedef volatile unsigned short FLASH_PORT_WIDTHV;
+
+#define PHYS_FLASH_1 CFG_FLASH_BASE
+#define FLASH_BANK_SIZE 0x200000
+
+#define FPW             FLASH_PORT_WIDTH
+#define FPWV            FLASH_PORT_WIDTHV
+
+/* Intel-compatible flash commands */
+#define INTEL_PROGRAM   0x00100010
+#define INTEL_ERASE     0x00200020
+#define INTEL_WRSETUP	0x00400040
+#define INTEL_CLEAR     0x00500050
+#define INTEL_LOCKBIT   0x00600060
+#define INTEL_PROTECT   0x00010001
+#define INTEL_STATUS    0x00700070
+#define INTEL_READID    0x00900090
+#define INTEL_CFIQRY	0x00980098
+#define INTEL_SUSERASE	0x00B000B0
+#define INTEL_PROTPROG	0x00C000C0
+#define INTEL_CONFIRM   0x00D000D0
+#define INTEL_RESET     0x00FF00FF
+
+/* Intel-compatible flash status bits */
+#define INTEL_FINISHED  0x00800080
+#define INTEL_OK        0x00800080
+#define INTEL_ERASESUS  0x00600060
+#define INTEL_WSM_SUS   (INTEL_FINISHED | INTEL_ERASESUS)
+
+/* 28F160C3B CFI Data offset - This could vary */
+#define INTEL_CFI_MFG	0x00	/* Manufacturer ID */
+#define INTEL_CFI_PART	0x01	/* Product ID */
+#define INTEL_CFI_LOCK  0x02	/* */
+#define INTEL_CFI_TWPRG 0x1F	/* Typical Single Word Program Timeout 2^n us */
+#define INTEL_CFI_MBUFW 0x20	/* Typical Max Buffer Write Timeout 2^n us */
+#define INTEL_CFI_TERB	0x21	/* Typical Block Erase Timeout 2^n ms */
+#define INTEL_CFI_MWPRG 0x23	/* Maximum Word program timeout 2^n us */
+#define INTEL_CFI_MERB  0x25	/* Maximum Block Erase Timeout 2^n s */
+#define INTEL_CFI_SIZE	0x27	/* Device size 2^n bytes */
+#define INTEL_CFI_BANK	0x2C	/* Number of Bank */
+#define INTEL_CFI_SZ1A	0x2F	/* Block Region Size */
+#define INTEL_CFI_SZ1B	0x30
+#define INTEL_CFI_SZ2A	0x33
+#define INTEL_CFI_SZ2B	0x34
+#define INTEL_CFI_BLK1	0x2D	/* Number of Blocks */
+#define INTEL_CFI_BLK2	0x31
+
+#define WR_BLOCK        0x20
+
+#define SYNC			__asm__("nop")
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+
+ulong flash_get_size(FPWV * addr, flash_info_t * info);
+int flash_get_offsets(ulong base, flash_info_t * info);
+int flash_cmd_rd(FPWV * addr, int index);
+int write_data(flash_info_t * info, ulong dest, FPW data);
+void flash_sync_real_protect(flash_info_t * info);
+uchar intel_sector_protected(flash_info_t * info, ushort sector);
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+
+ulong flash_init(void)
+{
+	FPWV *flash_addr[CFG_MAX_FLASH_BANKS];
+	ulong size;
+	int i;
+
+	flash_addr[0] = (FPW *) CFG_FLASH0_BASE;
+#ifdef CFG_FLASH1_BASE
+	flash_addr[1] = (FPW *) CFG_FLASH1_BASE;
+#endif
+
+	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+		memset(&flash_info[i], 0, sizeof(flash_info_t));
+
+		size = flash_get_size(flash_addr[i], &flash_info[i]);
+		flash_protect(FLAG_PROTECT_CLEAR,
+			      flash_info[i].start[0],
+			      flash_info[i].start[0] + size - 1,
+			      &flash_info[0]);
+		/* get the h/w and s/w protection status in sync */
+		flash_sync_real_protect(&flash_info[i]);
+	}
+
+	/* Protect monitor and environment sectors */
+	flash_protect(FLAG_PROTECT_SET,
+		      CFG_MONITOR_BASE,
+		      CFG_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0]);
+
+	return size;
+}
+
+void flash_print_info(flash_info_t * info)
+{
+	int i;
+
+	switch (info->flash_id & FLASH_VENDMASK) {
+	case FLASH_MAN_INTEL:
+		printf("INTEL ");
+		break;
+	default:
+		printf("Unknown Vendor ");
+		break;
+	}
+
+	switch (info->flash_id & FLASH_TYPEMASK) {
+	case FLASH_28F160C3B:
+		printf("28F160C3B\n");
+		break;
+	case FLASH_28F160C3T:
+		printf("28F160C3T\n");
+		break;
+	case FLASH_28F320C3B:
+		printf("28F320C3B\n");
+		break;
+	case FLASH_28F320C3T:
+		printf("28F320C3T\n");
+		break;
+	case FLASH_28F640C3B:
+		printf("28F640C3B\n");
+		break;
+	case FLASH_28F640C3T:
+		printf("28F640C3T\n");
+		break;
+	default:
+		printf("Unknown Chip Type\n");
+		return;
+	}
+
+	if (info->size > 0x100000) {
+		int remainder;
+
+		printf("  Size: %ld", info->size >> 20);
+
+		remainder = (info->size % 0x100000);
+		if (remainder) {
+			remainder >>= 10;
+			remainder = (int)((float)
+					  (((float)remainder / (float)1024) *
+					   10000));
+			printf(".%d ", remainder);
+		}
+
+		printf("MB in %d Sectors\n", info->sector_count);
+	} else
+		printf("  Size: %ld KB in %d Sectors\n",
+		       info->size >> 10, info->sector_count);
+
+	printf("  Sector Start Addresses:");
+	for (i = 0; i < info->sector_count; ++i) {
+		if ((i % 5) == 0)
+			printf("\n   ");
+		printf(" %08lX%s",
+		       info->start[i], info->protect[i] ? " (RO)" : "     ");
+	}
+	printf("\n");
+}
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+ulong flash_get_size(FPWV * addr, flash_info_t * info)
+{
+	int intel = 0;
+	u16 value;
+	static int bank = 0;
+
+	/* Write auto select command: read Manufacturer ID */
+	/* Write auto select command sequence and test FLASH answer */
+	*addr = (FPW) INTEL_RESET;	/* restore read mode */
+	*addr = (FPW) INTEL_READID;
+
+	switch (addr[INTEL_CFI_MFG] & 0xff) {
+	case (ushort) INTEL_MANUFACT:
+		info->flash_id = FLASH_MAN_INTEL;
+		value = addr[INTEL_CFI_PART];
+		intel = 1;
+		break;
+	default:
+		printf("Unknown Flash\n");
+		info->flash_id = FLASH_UNKNOWN;
+		info->sector_count = 0;
+		info->size = 0;
+		*addr = (FPW) INTEL_RESET;	/* restore read mode */
+		return (0);	/* no or unknown flash  */
+	}
+
+	switch (value) {
+	case (u16) INTEL_ID_28F160C3B:
+		info->flash_id += FLASH_28F160C3B;
+		break;
+	case (u16) INTEL_ID_28F160C3T:
+		info->flash_id += FLASH_28F160C3T;
+		break;
+	case (u16) INTEL_ID_28F320C3B:
+		info->flash_id += FLASH_28F320C3B;
+		break;
+	case (u16) INTEL_ID_28F320C3T:
+		info->flash_id += FLASH_28F320C3T;
+		break;
+	case (u16) INTEL_ID_28F640C3B:
+		info->flash_id += FLASH_28F640C3B;
+		break;
+	case (u16) INTEL_ID_28F640C3T:
+		info->flash_id += FLASH_28F640C3T;
+		break;
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		break;
+	}
+
+	if (intel) {
+		/* Intel spec. under CFI section */
+		u32 sz, size, offset;
+		int sec, sectors, bs;
+		int part, i, j, cnt;
+
+		part = flash_cmd_rd(addr, INTEL_CFI_BANK);
+
+		/* Geometry y1 = y1 + 1, y2 = y2 + 1, CFI spec.
+		 * To be exact, Z = [0x2f 0x30] (LE) * 256 bytes * [0x2D 0x2E] block count
+		 * Z = [0x33 0x34] (LE) * 256 bytes * [0x31 0x32] block count
+		 */
+		offset = (u32) addr;
+		sectors = sec = 0;
+		size = sz = cnt = 0;
+		for (i = 0; i < part; i++) {
+			bs = (((addr[INTEL_CFI_SZ1B + i * 4] << 8) |
+			       addr[INTEL_CFI_SZ1A + i * 4]) * 0x100);
+			sec = addr[INTEL_CFI_BLK1 + i * 4] + 1;
+			sz = bs * sec;
+
+			for (j = 0; j < sec; j++) {
+				info->start[cnt++] = offset;
+				offset += bs;
+			}
+
+			sectors += sec;
+			size += sz;
+		}
+		info->sector_count = sectors;
+		info->size = size;
+	}
+
+	if (info->sector_count > CFG_MAX_FLASH_SECT) {
+		printf("** ERROR: sector count %d > max (%d) **\n",
+		       info->sector_count, CFG_MAX_FLASH_SECT);
+		info->sector_count = CFG_MAX_FLASH_SECT;
+	}
+
+	*addr = (FPW) INTEL_RESET;	/* restore read mode */
+
+	return (info->size);
+}
+
+int flash_cmd_rd(FPWV * addr, int index)
+{
+	return (int)addr[index];
+}
+
+/*
+ * This function gets the u-boot flash sector protection status
+ * (flash_info_t.protect[]) in sync with the sector protection
+ * status stored in hardware.
+ */
+void flash_sync_real_protect(flash_info_t * info)
+{
+	int i;
+
+	switch (info->flash_id & FLASH_TYPEMASK) {
+	case FLASH_28F160C3B:
+	case FLASH_28F160C3T:
+	case FLASH_28F320C3B:
+	case FLASH_28F320C3T:
+	case FLASH_28F640C3B:
+	case FLASH_28F640C3T:
+		for (i = 0; i < info->sector_count; ++i) {
+			info->protect[i] = intel_sector_protected(info, i);
+		}
+		break;
+	default:
+		/* no h/w protect support */
+		break;
+	}
+}
+
+/*
+ * checks if "sector" in bank "info" is protected. Should work on intel
+ * strata flash chips 28FxxxJ3x in 8-bit mode.
+ * Returns 1 if sector is protected (or timed-out while trying to read
+ * protection status), 0 if it is not.
+ */
+uchar intel_sector_protected(flash_info_t * info, ushort sector)
+{
+	FPWV *addr;
+	FPWV *lock_conf_addr;
+	ulong start;
+	unsigned char ret;
+
+	/*
+	 * first, wait for the WSM to be finished. The rationale for
+	 * waiting for the WSM to become idle for at most
+	 * CFG_FLASH_ERASE_TOUT is as follows. The WSM can be busy
+	 * because of: (1) erase, (2) program or (3) lock bit
+	 * configuration. So we just wait for the longest timeout of
+	 * the (1)-(3), i.e. the erase timeout.
+	 */
+
+	/* wait at least 35ns (W12) before issuing Read Status Register */
+	/*udelay(1); */
+	addr = (FPWV *) info->start[sector];
+	*addr = (FPW) INTEL_STATUS;
+
+	start = get_timer(0);
+	while ((*addr & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED) {
+		if (get_timer(start) > CFG_FLASH_UNLOCK_TOUT) {
+			*addr = (FPW) INTEL_RESET;	/* restore read mode */
+			printf("WSM busy too long, can't get prot status\n");
+			return 1;
+		}
+	}
+
+	/* issue the Read Identifier Codes command */
+	*addr = (FPW) INTEL_READID;
+
+	/* Intel example code uses offset of 4 for 8-bit flash */
+	lock_conf_addr = (FPWV *) info->start[sector];
+	ret = (lock_conf_addr[INTEL_CFI_LOCK] & (FPW) INTEL_PROTECT) ? 1 : 0;
+
+	/* put flash back in read mode */
+	*addr = (FPW) INTEL_RESET;
+
+	return ret;
+}
+
+int flash_erase(flash_info_t * info, int s_first, int s_last)
+{
+	int flag, prot, sect;
+	ulong type, start, last;
+	int rcode = 0;
+
+	if ((s_first < 0) || (s_first > s_last)) {
+		if (info->flash_id == FLASH_UNKNOWN)
+			printf("- missing\n");
+		else
+			printf("- no sectors to erase\n");
+		return 1;
+	}
+
+	type = (info->flash_id & FLASH_VENDMASK);
+	if ((type != FLASH_MAN_INTEL)) {
+		type = (info->flash_id & FLASH_VENDMASK);
+		printf("Can't erase unknown flash type %08lx - aborted\n",
+		       info->flash_id);
+		return 1;
+	}
+
+	prot = 0;
+	for (sect = s_first; sect <= s_last; ++sect) {
+		if (info->protect[sect]) {
+			prot++;
+		}
+	}
+
+	if (prot)
+		printf("- Warning: %d protected sectors will not be erased!\n",
+		       prot);
+	else
+		printf("\n");
+
+	start = get_timer(0);
+	last = start;
+
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts();
+
+	/* Start erase on unprotected sectors */
+	for (sect = s_first; sect <= s_last; sect++) {
+		if (info->protect[sect] == 0) {	/* not protected */
+
+			FPWV *addr = (FPWV *) (info->start[sect]);
+			int min = 0;
+
+			printf("Erasing sector %2d ... ", sect);
+
+			/* arm simple, non interrupt dependent timer */
+			start = get_timer(0);
+
+			*addr = (FPW) INTEL_READID;
+			min = addr[INTEL_CFI_TERB];
+			min = 1 << min;	/* ms */
+			min = (min / info->sector_count) * 1000;
+
+			/* start erase block */
+			*addr = (FPW) INTEL_CLEAR;	/* clear status register */
+			*addr = (FPW) INTEL_ERASE;	/* erase setup */
+			*addr = (FPW) INTEL_CONFIRM;	/* erase confirm */
+
+			while ((*addr & (FPW) INTEL_FINISHED) !=
+			       (FPW) INTEL_FINISHED) {
+
+				if (get_timer(start) > CFG_FLASH_ERASE_TOUT) {
+					printf("Timeout\n");
+					*addr = (FPW) INTEL_SUSERASE;	/* suspend erase     */
+					*addr = (FPW) INTEL_RESET;	/* reset to read mode */
+
+					rcode = 1;
+					break;
+				}
+			}
+
+			*addr = (FPW) INTEL_RESET;	/* resest to read mode          */
+
+			printf(" done\n");
+		}
+	}
+
+	return rcode;
+}
+
+int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+	if (info->flash_id == FLASH_UNKNOWN)
+		return 4;
+
+	switch (info->flash_id & FLASH_VENDMASK) {
+	case FLASH_MAN_INTEL:
+		{
+			ulong cp, wp;
+			FPW data;
+			int i, l, rc, port_width;
+
+			/* get lower word aligned address */
+			wp = addr;
+			port_width = 1;
+
+			/*
+			 * handle unaligned start bytes
+			 */
+			if ((l = addr - wp) != 0) {
+				data = 0;
+				for (i = 0, cp = wp; i < l; ++i, ++cp) {
+					data = (data << 8) | (*(uchar *) cp);
+				}
+
+				for (; i < port_width && cnt > 0; ++i) {
+					data = (data << 8) | *src++;
+					--cnt;
+					++cp;
+				}
+
+				for (; cnt == 0 && i < port_width; ++i, ++cp)
+					data = (data << 8) | (*(uchar *) cp);
+
+				if ((rc = write_data(info, wp, data)) != 0)
+					return (rc);
+
+				wp += port_width;
+			}
+
+			/* handle word aligned part */
+			while (cnt >= 2) {
+				data = *((FPW *) src);
+
+				if ((rc =
+				     write_data(info, (ulong) ((FPWV *) wp),
+						(FPW) data)) != 0) {
+					return (rc);
+				}
+
+				src += sizeof(FPW);
+				wp += sizeof(FPW);
+				cnt -= sizeof(FPW);
+			}
+
+			if (cnt == 0)
+				return ERR_OK;
+
+			/*
+			 * handle unaligned tail bytes
+			 */
+			data = 0;
+			for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) {
+				data = (data >> 8) | (*src++ << 8);
+				--cnt;
+			}
+			for (; i < 2; ++i, ++cp) {
+				data |= (*(uchar *) cp);
+			}
+
+			return write_data(info, (ulong) ((FPWV *) wp),
+					  (FPW) data);
+
+		}		/* case FLASH_MAN_INTEL */
+
+	}			/* switch */
+
+	return ERR_OK;
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word or halfword to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+int write_data(flash_info_t * info, ulong dest, FPW data)
+{
+	FPWV *addr = (FPWV *) dest;
+	ulong start;
+	int flag;
+
+	/* Check if Flash is (sufficiently) erased */
+	if ((*addr & data) != data) {
+		printf("not erased at %08lx (%lx)\n", (ulong) addr,
+		       (ulong) * addr);
+		return (2);
+	}
+
+	/* Disable interrupts which might cause a timeout here */
+	flag = (int)disable_interrupts();
+
+	*addr = (FPW) INTEL_CLEAR;
+	*addr = (FPW) INTEL_RESET;
+
+	*addr = (FPW) INTEL_WRSETUP;	/* write setup */
+	*addr = data;
+
+	/* arm simple, non interrupt dependent timer */
+	start = get_timer(0);
+
+	/* wait while polling the status register */
+	while ((*addr & (FPW) INTEL_OK) != (FPW) INTEL_OK) {
+		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+			*addr = (FPW) INTEL_SUSERASE;	/* suspend mode */
+			*addr = (FPW) INTEL_CLEAR;	/* clear status */
+			*addr = (FPW) INTEL_RESET;	/* reset */
+			return (1);
+		}
+	}
+
+	*addr = (FPW) INTEL_CLEAR;	/* clear status */
+	*addr = (FPW) INTEL_RESET;	/* restore read mode */
+
+	return (0);
+}
+
+#ifdef CFG_FLASH_PROTECTION
+/*-----------------------------------------------------------------------
+ */
+int flash_real_protect(flash_info_t * info, long sector, int prot)
+{
+	int rcode = 0;		/* assume success */
+	FPWV *addr;		/* address of sector */
+	FPW value;
+
+	addr = (FPWV *) (info->start[sector]);
+
+	switch (info->flash_id & FLASH_TYPEMASK) {
+	case FLASH_28F160C3B:
+	case FLASH_28F160C3T:
+	case FLASH_28F320C3B:
+	case FLASH_28F320C3T:
+	case FLASH_28F640C3B:
+	case FLASH_28F640C3T:
+		*addr = (FPW) INTEL_RESET;	/* make sure in read mode */
+		*addr = (FPW) INTEL_LOCKBIT;	/* lock command setup */
+
+		if (prot)
+			*addr = (FPW) INTEL_PROTECT;	/* lock sector */
+		else
+			*addr = (FPW) INTEL_CONFIRM;	/* unlock sector */
+
+		/* now see if it really is locked/unlocked as requested */
+		*addr = (FPW) INTEL_READID;
+
+		/* read sector protection at sector address, (A7 .. A0) = 0x02.
+		 * D0 = 1 for each device if protected.
+		 * If at least one device is protected the sector is marked
+		 * protected, but return failure. Mixed protected and
+		 * unprotected devices within a sector should never happen.
+		 */
+		value = addr[2] & (FPW) INTEL_PROTECT;
+		if (value == 0)
+			info->protect[sector] = 0;
+		else if (value == (FPW) INTEL_PROTECT)
+			info->protect[sector] = 1;
+		else {
+			/* error, mixed protected and unprotected */
+			rcode = 1;
+			info->protect[sector] = 1;
+		}
+		if (info->protect[sector] != prot)
+			rcode = 1;	/* failed to protect/unprotect as requested */
+
+		/* reload all protection bits from hardware for now */
+		flash_sync_real_protect(info);
+		break;
+
+	default:
+		/* no hardware protect that we support */
+		info->protect[sector] = prot;
+		break;
+	}
+
+	return rcode;
+}
+#endif				/* CFG_FLASH_PROTECTION */
+#endif				/* CFG_FLASH_CFI */
diff --git a/board/freescale/m5329evb/m5329evb.c b/board/freescale/m5329evb/m5329evb.c
new file mode 100644
index 0000000000..4ccea30d61
--- /dev/null
+++ b/board/freescale/m5329evb/m5329evb.c
@@ -0,0 +1,376 @@
+/*
+ * (C) Copyright 2000-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fec.h>
+#include <asm/m5329.h>
+#include <asm/immap_5329.h>
+
+#include <config.h>
+#include <net.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int checkboard(void)
+{
+	puts("Board: ");
+	puts("Freescale FireEngine 5329 EVB\n");
+	return 0;
+};
+
+long int initdram(int board_type)
+{
+	volatile sdram_t *sdram = (volatile sdram_t *)(MMAP_SDRAM);
+	u32 dramsize, i;
+
+	dramsize = CFG_SDRAM_SIZE * 0x100000;
+
+	for (i = 0x13; i < 0x20; i++) {
+		if (dramsize == (1 << i))
+			break;
+	}
+	i--;
+
+	sdram->cs0 = (CFG_SDRAM_BASE | i);
+	sdram->cfg1 = CFG_SDRAM_CFG1;
+	sdram->cfg2 = CFG_SDRAM_CFG2;
+
+	/* Issue PALL */
+	sdram->ctrl = CFG_SDRAM_CTRL | 2;
+
+	/* Issue LEMR */
+	sdram->mode = CFG_SDRAM_EMOD;
+	sdram->mode = (CFG_SDRAM_MODE | 0x04000000);
+
+	udelay(500);
+
+	/* Issue PALL */
+	sdram->ctrl = (CFG_SDRAM_CTRL | 2);
+
+	/* Perform two refresh cycles */
+	sdram->ctrl = CFG_SDRAM_CTRL | 4;
+	sdram->ctrl = CFG_SDRAM_CTRL | 4;
+
+	sdram->mode = CFG_SDRAM_MODE;
+
+	sdram->ctrl = (CFG_SDRAM_CTRL & ~0x80000000) | 0x10000c00;
+
+	udelay(100);
+
+	return dramsize;
+};
+
+int testdram(void)
+{
+	/* TODO: XXX XXX XXX */
+	printf("DRAM test not implemented!\n");
+
+	return (0);
+}
+
+#ifdef CFG_FLASH_CFI
+void sync(void)
+{
+	/* This sync function is PowerPC intruction,
+	   coldfire does not have this instruction. Dummy function */
+}
+#endif
+
+#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI)
+#undef MII_DEBUG
+#undef ET_DEBUG
+
+int fecpin_setclear(struct eth_device *dev, int setclear)
+{
+	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+
+	if (setclear) {
+		gpio->par_fec |= GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC;
+		gpio->par_feci2c |=
+		    GPIO_PAR_FECI2C_MDC_EMDC | GPIO_PAR_FECI2C_MDIO_EMDIO;
+	} else {
+		gpio->par_fec &= ~(GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC);
+		gpio->par_feci2c &=
+		    ~(GPIO_PAR_FECI2C_MDC_EMDC | GPIO_PAR_FECI2C_MDIO_EMDIO);
+	}
+	return 0;
+}
+
+#if defined(CFG_DISCOVER_PHY) || (CONFIG_COMMANDS & CFG_CMD_MII)
+#include <miiphy.h>
+
+/* Make MII read/write commands for the FEC. */
+#define mk_mii_read(ADDR, REG)	(0x60020000 | ((ADDR << 23) | \
+						(REG & 0x1f) << 18))
+
+#define mk_mii_write(ADDR, REG, VAL)	(0x50020000 | ((ADDR << 23) | \
+						(REG & 0x1f) << 18) | \
+						(VAL & 0xffff))
+
+/* PHY identification */
+#define PHY_ID_LXT970		0x78100000	/* LXT970 */
+#define PHY_ID_LXT971		0x001378e0	/* LXT971 and 972 */
+#define PHY_ID_82555		0x02a80150	/* Intel 82555 */
+#define PHY_ID_QS6612		0x01814400	/* QS6612 */
+#define PHY_ID_AMD79C784	0x00225610	/* AMD 79C784 */
+#define PHY_ID_LSI80225		0x0016f870	/* LSI 80225 */
+#define PHY_ID_LSI80225B	0x0016f880	/* LSI 80225/B */
+#define PHY_ID_DP83848VV	0x20005C90	/* National 83848 */
+#define PHY_ID_DP83849		0x20005CA2	/* National 82849 */
+
+#define STR_ID_LXT970		"LXT970"
+#define STR_ID_LXT971		"LXT971"
+#define STR_ID_82555		"Intel82555"
+#define STR_ID_QS6612		"QS6612"
+#define STR_ID_AMD79C784	"AMD79C784"
+#define STR_ID_LSI80225		"LSI80225"
+#define STR_ID_LSI80225B	"LSI80225/B"
+#define STR_ID_DP83848VV	"N83848"
+#define STR_ID_DP83849		"N83849"
+
+/****************************************************************************
+ * mii_init -- Initialize the MII for MII command without ethernet
+ * This function is a subset of eth_init
+ ****************************************************************************
+ */
+void mii_reset(struct fec_info_s *info)
+{
+	volatile fec_t *fecp = (fec_t *) (info->miibase);
+	int i;
+
+	fecp->ecr = FEC_ECR_RESET;
+	for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
+		udelay(1);
+	}
+	if (i == FEC_RESET_DELAY) {
+		printf("FEC_RESET_DELAY timeout\n");
+	}
+}
+
+/* send command to phy using mii, wait for result */
+uint mii_send(uint mii_cmd)
+{
+	struct fec_info_s *info;
+	struct eth_device *dev;
+	volatile fec_t *ep;
+	uint mii_reply;
+	int j = 0;
+
+	/* retrieve from register structure */
+	dev = eth_get_dev();
+	info = dev->priv;
+
+	ep = (fec_t *) info->miibase;
+
+	ep->mmfr = mii_cmd;	/* command to phy */
+
+	/* wait for mii complete */
+	while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
+		udelay(1);
+		j++;
+	}
+	if (j >= MCFFEC_TOUT_LOOP) {
+		printf("MII not complete\n");
+		return -1;
+	}
+
+	mii_reply = ep->mmfr;	/* result from phy */
+	ep->eir = FEC_EIR_MII;	/* clear MII complete */
+#ifdef ET_DEBUG
+	printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
+	       __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
+#endif
+
+	return (mii_reply & 0xffff);	/* data read from phy */
+}
+#endif				/* CFG_DISCOVER_PHY || (CONFIG_COMMANDS & CFG_CMD_MII) */
+
+#if defined(CFG_DISCOVER_PHY)
+int mii_discover_phy(struct eth_device *dev)
+{
+#define MAX_PHY_PASSES 11
+	struct fec_info_s *info = dev->priv;
+	int phyaddr, pass;
+	uint phyno, phytype;
+
+	if (info->phyname_init)
+		return info->phy_addr;
+
+	phyaddr = -1;		/* didn't find a PHY yet */
+	for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
+		if (pass > 1) {
+			/* PHY may need more time to recover from reset.
+			 * The LXT970 needs 50ms typical, no maximum is
+			 * specified, so wait 10ms before try again.
+			 * With 11 passes this gives it 100ms to wake up.
+			 */
+			udelay(10000);	/* wait 10ms */
+		}
+
+		for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
+
+			phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
+#ifdef ET_DEBUG
+			printf("PHY type 0x%x pass %d type\n", phytype, pass);
+#endif
+			if (phytype != 0xffff) {
+				phyaddr = phyno;
+				phytype <<= 16;
+				phytype |=
+				    mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
+
+				switch (phytype & 0xffffffff) {
+				case PHY_ID_DP83848VV:
+					strcpy(info->phy_name,
+					       STR_ID_DP83848VV);
+					info->phyname_init = 1;
+					break;
+				default:
+					strcpy(info->phy_name, "unknown");
+					info->phyname_init = 1;
+					break;
+				}
+
+#ifdef ET_DEBUG
+				printf("PHY @ 0x%x pass %d type ", phyno, pass);
+				switch (phytype & 0xffffffff) {
+				case PHY_ID_DP83848VV:
+					printf(STR_ID_DP83848VV);
+					break;
+				default:
+					printf("0x%08x\n", phytype);
+					break;
+				}
+#endif
+			}
+		}
+	}
+	if (phyaddr < 0)
+		printf("No PHY device found.\n");
+
+	return phyaddr;
+}
+#endif				/* CFG_DISCOVER_PHY */
+
+void mii_init(void)
+{
+	volatile fec_t *fecp;
+	struct fec_info_s *info;
+	struct eth_device *dev;
+	int miispd = 0, i = 0;
+	u16 autoneg = 0;
+
+	/* retrieve from register structure */
+	dev = eth_get_dev();
+	info = dev->priv;
+
+	fecp = (fec_t *) info->miibase;
+
+	fecpin_setclear(dev, 1);
+
+	mii_reset(info);
+
+	/* We use strictly polling mode only */
+	fecp->eimr = 0;
+
+	/* Clear any pending interrupt */
+	fecp->eir = 0xffffffff;
+
+	/* Set MII speed */
+	miispd = (gd->bus_clk / 1000000) / 5;
+	fecp->mscr = miispd << 1;
+
+	info->phy_addr = mii_discover_phy(dev);
+
+#define AUTONEGLINK		(PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
+	while (i < MCFFEC_TOUT_LOOP) {
+		autoneg = 0;
+		miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
+		i++;
+
+		if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
+			break;
+
+		udelay(500);
+	}
+	if (i >= MCFFEC_TOUT_LOOP) {
+		printf("Auto Negotiation not complete\n");
+	}
+
+	/* adapt to the half/full speed settings */
+	info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
+	info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
+}
+
+/*****************************************************************************
+ * Read and write a MII PHY register, routines used by MII Utilities
+ *
+ * FIXME: These routines are expected to return 0 on success, but mii_send
+ *	  does _not_ return an error code. Maybe 0xFFFF means error, i.e.
+ *	  no PHY connected...
+ *	  For now always return 0.
+ * FIXME: These routines only work after calling eth_init() at least once!
+ *	  Otherwise they hang in mii_send() !!! Sorry!
+ *****************************************************************************/
+
+int mcffec_miiphy_read(char *devname, unsigned char addr,
+		       unsigned char reg, unsigned short *value)
+{
+	short rdreg;		/* register working value */
+
+#ifdef MII_DEBUG
+	printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
+#endif
+	rdreg = mii_send(mk_mii_read(addr, reg));
+
+	*value = rdreg;
+
+#ifdef MII_DEBUG
+	printf("0x%04x\n", *value);
+#endif
+
+	return 0;
+}
+
+int mcffec_miiphy_write(char *devname, unsigned char addr,
+			unsigned char reg, unsigned short value)
+{
+	short rdreg;		/* register working value */
+
+#ifdef MII_DEBUG
+	printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
+#endif
+
+	rdreg = mii_send(mk_mii_write(addr, reg, value));
+
+#ifdef MII_DEBUG
+	printf("0x%04x\n", value);
+#endif
+
+	return 0;
+}
+
+#endif				/* CFG_CMD_NET, FEC_ENET & NET_MULTI */
diff --git a/board/freescale/m5329evb/u-boot.lds b/board/freescale/m5329evb/u-boot.lds
new file mode 100644
index 0000000000..9b994a09db
--- /dev/null
+++ b/board/freescale/m5329evb/u-boot.lds
@@ -0,0 +1,144 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(m68k)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/mcf532x/start.o		(.text)
+    lib_m68k/traps.o		(.text)
+    lib_m68k/interrupts.o	(.text)
+    common/dlmalloc.o		(.text)
+    lib_generic/zlib.o		(.text)
+
+    . = DEFINED(env_offset) ? env_offset : .;
+    common/environment.o	(.text)
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+
+  .reloc   :
+  {
+    __got_start = .;
+    *(.got)
+    __got_end = .;
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = .;
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  . = .;
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   _sbss = .;
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+   . = ALIGN(4);
+   _ebss = .;
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}