Merge branch 'next' of git://git.denx.de/u-boot

* 'next' of git://git.denx.de/u-boot:
  MPC8xx: Fixup warning in arch/powerpc/cpu/mpc8xx/cpu.c
  doc: cleanup - move board READMEs into respective board directories
  net: sh_eth: add support for SH7757's GETHER
  net: sh_eth: modify the definitions of regsiter
  net: sh_eth: add SH_ETH_TYPE_ condition
  net: sh_eth: clean up for the SH7757's code
  net: fec_mxc: Fix MDC for xMII
  net: fec_mxc: Fix setting of RCR for xMII
  net: nfs: make NFS_TIMEOUT configurable
  net: Inline the new eth_setenv_enetaddr_by_index function
  net: allow setting env enetaddr from net device setting
  net/designware: Consecutive writes to the same register to be avoided
  CACHE: net: asix: Fix asix driver to work with data cache on
  net: phy: micrel: make ksz9021 phy accessible
  net: abort network initialization if the PHY driver fails
  phylib: phy_startup() should return an error code on failure
  net: tftp: fix type of block arg to store_block

Signed-off-by: Wolfgang Denk <wd@denx.de>

1 files changed, 54 insertions, 0 deletions

diff --git a/board/evb64260/README b/board/evb64260/README
new file mode 100644
index 0000000000..74211dea43
--- /dev/null
+++ b/board/evb64260/README
@@ -0,0 +1,54 @@
+This file contains status information for the port of U-Boot to the
+Galileo Evaluation Board.
+
+Author: Josh Huber <huber@mclx.com>
+	Mission Critical Linux, Inc.
+
+The support for the Galileo Evaluation board is fairly minimal now.
+It's sufficient to boot Linux, but doesn't provide too much more than
+what's required to do this.
+
+Both DUART channels are supported (to use the second one, you have to
+modify the board -- see the schematics for where to solder on the
+devices module).  The ethernet ports are supported, and the MPSC is
+supported as a console driver. (keep in mind that the kernel has no
+support for this yet)
+
+There are still occaisonal lockups with the MPSC console driver due to
+(we think!) overrun problems.  If you're looking for something stable
+to use for Linux development, consider sticking with the DUART console
+for now.
+
+Automatic memory sizing mostly works.  We've had problems with some
+combinations of memory.  Please send us email if you're having trouble
+with respect to the memory detection.
+
+Right now, only the 512k boot flash is supported.  Support for the
+16MB flash on the devices module is forthcoming.  Right now the flash
+is stored at the 256k boundry in flash, wasting a whole sector (64k!)
+for environment data.  This isn't really a big deal since we're not
+using the 512k for anything else. (Just U-Boot and the environment)
+
+Finally, here is a sample output session:
+
+U-Boot 1.0.0-pre1 (Jun  6 2001 - 12:45:11)
+
+Initializing...
+  CPU:   MPC7400 (altivec enabled) v2.9
+  Board: EVB64260
+  DRAM:  256 MB
+  FLASH: 512 kB
+  In:    serial
+  Out:   serial
+  Err:   serial
+
+=>
+
+The default configuration should be correct for the evaluation board,
+as it's shipped from Galileo.  Keep in mind that the default baudrate
+is set to 38400, 8N1.
+
+Good luck, and make sure to send any bugreports to us (or the
+u-boot-users list).
+
+Josh