powerpc: debris: remove orphan board

This board has been orphan for a while.
(Emails to its maintainer have been bouncing.)

Because MPC82xx family is old enough, nobody would pick up
the maintainership on it.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denx <wd@denx.de>

1 files changed, 0 insertions, 174 deletions

diff --git a/board/etin/debris/debris.c b/board/etin/debris/debris.c
deleted file mode 100644
index 0308fef6cf..0000000000
--- a/board/etin/debris/debris.c
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- * (C) Copyright 2000
- * Sangmoon Kim, Etin Systems. dogoil@etinsys.com.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc824x.h>
-#include <net.h>
-#include <pci.h>
-#include <i2c.h>
-#include <netdev.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int checkboard (void)
-{
-	/*TODO: Check processor type */
-
-	puts (	"Board: Debris "
-#ifdef CONFIG_MPC8240
-		"8240"
-#endif
-#ifdef CONFIG_MPC8245
-		"8245"
-#endif
-		" ##Test not implemented yet##\n");
-	return 0;
-}
-
-#if 0	/* NOT USED */
-int checkflash (void)
-{
-	/* TODO: XXX XXX XXX */
-	printf ("## Test not implemented yet ##\n");
-
-	return (0);
-}
-#endif
-
-phys_size_t initdram (int board_type)
-{
-	int m, row, col, bank, i;
-	unsigned long start, end;
-	uint32_t mccr1;
-	uint32_t mear1 = 0, emear1 = 0, msar1 = 0, emsar1 = 0;
-	uint32_t mear2 = 0, emear2 = 0, msar2 = 0, emsar2 = 0;
-	uint8_t mber = 0;
-
-	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-
-	if (i2c_reg_read (0x50, 2) != 0x04) return 0;	/* Memory type */
-	m = i2c_reg_read (0x50, 5);	/* # of physical banks */
-	row = i2c_reg_read (0x50, 3);	/* # of rows */
-	col = i2c_reg_read (0x50, 4);	/* # of columns */
-	bank = i2c_reg_read (0x50, 17);	/* # of logical banks */
-
-	CONFIG_READ_WORD(MCCR1, mccr1);
-	mccr1 &= 0xffff0000;
-
-	start = CONFIG_SYS_SDRAM_BASE;
-	end = start + (1 << (col + row + 3) ) * bank - 1;
-
-	for (i = 0; i < m; i++) {
-		mccr1 |= ((row == 13)? 2 : (bank == 4)? 0 : 3) << i * 2;
-		if (i < 4) {
-			msar1  |= ((start >> 20) & 0xff) << i * 8;
-			emsar1 |= ((start >> 28) & 0xff) << i * 8;
-			mear1  |= ((end >> 20) & 0xff) << i * 8;
-			emear1 |= ((end >> 28) & 0xff) << i * 8;
-		} else {
-			msar2  |= ((start >> 20) & 0xff) << (i-4) * 8;
-			emsar2 |= ((start >> 28) & 0xff) << (i-4) * 8;
-			mear2  |= ((end >> 20) & 0xff) << (i-4) * 8;
-			emear2 |= ((end >> 28) & 0xff) << (i-4) * 8;
-		}
-		mber |= 1 << i;
-		start += (1 << (col + row + 3) ) * bank;
-		end += (1 << (col + row + 3) ) * bank;
-	}
-	for (; i < 8; i++) {
-		if (i < 4) {
-			msar1  |= 0xff << i * 8;
-			emsar1 |= 0x30 << i * 8;
-			mear1  |= 0xff << i * 8;
-			emear1 |= 0x30 << i * 8;
-		} else {
-			msar2  |= 0xff << (i-4) * 8;
-			emsar2 |= 0x30 << (i-4) * 8;
-			mear2  |= 0xff << (i-4) * 8;
-			emear2 |= 0x30 << (i-4) * 8;
-		}
-	}
-
-	CONFIG_WRITE_WORD(MCCR1, mccr1);
-	CONFIG_WRITE_WORD(MSAR1, msar1);
-	CONFIG_WRITE_WORD(EMSAR1, emsar1);
-	CONFIG_WRITE_WORD(MEAR1, mear1);
-	CONFIG_WRITE_WORD(EMEAR1, emear1);
-	CONFIG_WRITE_WORD(MSAR2, msar2);
-	CONFIG_WRITE_WORD(EMSAR2, emsar2);
-	CONFIG_WRITE_WORD(MEAR2, mear2);
-	CONFIG_WRITE_WORD(EMEAR2, emear2);
-	CONFIG_WRITE_BYTE(MBER, mber);
-
-	return (1 << (col + row + 3) ) * bank * m;
-}
-
-/*
- * Initialize PCI Devices, report devices found.
- */
-#ifndef CONFIG_PCI_PNP
-static struct pci_config_table pci_debris_config_table[] = {
-	{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x0f, PCI_ANY_ID,
-	  pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
-				       PCI_ENET0_MEMADDR,
-				       PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }},
-	{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x10, PCI_ANY_ID,
-	  pci_cfgfunc_config_device, { PCI_ENET1_IOADDR,
-				       PCI_ENET1_MEMADDR,
-				       PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }},
-	{ }
-};
-#endif
-
-struct pci_controller hose = {
-#ifndef CONFIG_PCI_PNP
-	config_table: pci_debris_config_table,
-#endif
-};
-
-void pci_init_board(void)
-{
-	pci_mpc824x_init(&hose);
-}
-
-void *nvram_read(void *dest, const long src, size_t count)
-{
-	volatile uchar *d = (volatile uchar*) dest;
-	volatile uchar *s = (volatile uchar*) src;
-	while(count--) {
-		*d++ = *s++;
-		asm volatile("sync");
-	}
-	return dest;
-}
-
-void nvram_write(long dest, const void *src, size_t count)
-{
-	volatile uchar *d = (volatile uchar*)dest;
-	volatile uchar *s = (volatile uchar*)src;
-	while(count--) {
-		*d++ = *s++;
-		asm volatile("sync");
-	}
-}
-
-int misc_init_r(void)
-{
-	uchar ethaddr[6];
-
-	if (eth_getenv_enetaddr("ethaddr", ethaddr))
-		/* Write ethernet addr in NVRAM for VxWorks */
-		nvram_write(CONFIG_ENV_ADDR + CONFIG_SYS_NVRAM_VXWORKS_OFFS,
-				ethaddr, 6);
-
-	return 0;
-}
-
-int board_eth_init(bd_t *bis)
-{
-	return pci_eth_init(bis);
-}