summaryrefslogtreecommitdiffstats
path: root/board/esd/mecp5200
diff options
context:
space:
mode:
authorJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>2008-10-16 15:01:15 +0200
committerWolfgang Denk <wd@denx.de>2008-10-18 21:54:03 +0200
commit6d0f6bcf337c5261c08fabe12982178c2c489d76 (patch)
treeae13958ffa9c6b58c2ea97aac07a4ad2f04a350f /board/esd/mecp5200
parent71edc271816ec82cf0550dd6980be2da3cc2ad9e (diff)
downloadblackbird-obmc-uboot-6d0f6bcf337c5261c08fabe12982178c2c489d76.tar.gz
blackbird-obmc-uboot-6d0f6bcf337c5261c08fabe12982178c2c489d76.zip
rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Diffstat (limited to 'board/esd/mecp5200')
-rw-r--r--board/esd/mecp5200/mecp5200.c16
1 files changed, 8 insertions, 8 deletions
diff --git a/board/esd/mecp5200/mecp5200.c b/board/esd/mecp5200/mecp5200.c
index ff44abdac5..31924502e4 100644
--- a/board/esd/mecp5200/mecp5200.c
+++ b/board/esd/mecp5200/mecp5200.c
@@ -81,7 +81,7 @@ static void sdram_start(int hi_addr)
/*
* ATTENTION: Although partially referenced initdram does NOT make real use
- * use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE
+ * use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE
* is something else than 0x00000000.
*/
@@ -106,9 +106,9 @@ phys_size_t initdram(int board_type)
/* find RAM size using SDRAM CS0 only */
sdram_start(0);
- test1 = get_ram_size(CFG_SDRAM_BASE, 0x80000000);
+ test1 = get_ram_size(CONFIG_SYS_SDRAM_BASE, 0x80000000);
sdram_start(1);
- test2 = get_ram_size(CFG_SDRAM_BASE, 0x80000000);
+ test2 = get_ram_size(CONFIG_SYS_SDRAM_BASE, 0x80000000);
if (test1 > test2) {
sdram_start(0);
@@ -143,9 +143,9 @@ phys_size_t initdram(int board_type)
#if 0
/* find RAM size using SDRAM CS1 only */
sdram_start(0);
- get_ram_size((ulong *) (CFG_SDRAM_BASE + dramsize), 0x80000000);
+ get_ram_size((ulong *) (CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
sdram_start(1);
- get_ram_size((ulong *) (CFG_SDRAM_BASE + dramsize), 0x80000000);
+ get_ram_size((ulong *) (CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
sdram_start(0);
#endif
/* set SDRAM CS1 size according to the amount of RAM found */
@@ -175,14 +175,14 @@ void flash_preinit(void)
void flash_afterinit(ulong size)
{
- if (size == CFG_FLASH_SIZE) {
+ if (size == CONFIG_SYS_FLASH_SIZE) {
/* adjust mapping */
*(vu_long *) MPC5XXX_BOOTCS_START =
*(vu_long *) MPC5XXX_CS0_START =
- START_REG(CFG_BOOTCS_START | size);
+ START_REG(CONFIG_SYS_BOOTCS_START | size);
*(vu_long *) MPC5XXX_BOOTCS_STOP =
*(vu_long *) MPC5XXX_CS0_STOP =
- STOP_REG(CFG_BOOTCS_START | size, size);
+ STOP_REG(CONFIG_SYS_BOOTCS_START | size, size);
}
}
OpenPOWER on IntegriCloud