PowerPC: drop some 74xx_7xx boards and related code

The file  board/Marvell/include/mv_gen_reg.h  is incompatible with
the GPL (see for example the "MARVELL RESERVES THE RIGHT AT ITS SOLE
DISCRETION TO REQUEST THAT THIS CODE BE IMMEDIATELY RETURNED TO
MARVELL" clause).  As this cannot be fixed, we remove the file and all
code that depends on it.  Fortunately this only affects some very old
boards that have long reached EOL:
	CPCI750
	DB64360
	DB64460
	p3m750
	p3m7448

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Roger Meier <r.meier@siemens.com>

1 files changed, 0 insertions, 245 deletions

diff --git a/board/esd/cpci750/misc.S b/board/esd/cpci750/misc.S
deleted file mode 100644
index 233fd83bcc..0000000000
--- a/board/esd/cpci750/misc.S
+++ /dev/null
@@ -1,245 +0,0 @@
-#include <config.h>
-#include <74xx_7xx.h>
-#include "version.h"
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-#include "../../Marvell/include/mv_gen_reg.h"
-
-#ifdef CONFIG_ECC
-	/* Galileo specific asm code for initializing ECC */
-	.globl board_relocate_rom
-board_relocate_rom:
-	mflr	r7
-	/* update the location of the GT registers */
-	lis	r11, CONFIG_SYS_GT_REGS@h
-	/* if we're using ECC, we must use the DMA engine to copy ourselves */
-	bl	start_idma_transfer_0
-	bl	wait_for_idma_0
-	bl	stop_idma_engine_0
-
-	mtlr	r7
-	blr
-
-	.globl board_init_ecc
-board_init_ecc:
-	mflr	r7
-	/* NOTE: r10 still contains the location we've been relocated to
-	 * which happens to be TOP_OF_RAM - CONFIG_SYS_MONITOR_LEN */
-
-	/* now that we're running from ram, init the rest of main memory
-	 * for ECC use */
-	lis	r8, CONFIG_SYS_MONITOR_LEN@h
-	ori	r8, r8, CONFIG_SYS_MONITOR_LEN@l
-
-	divw	r3, r10, r8
-
-	/* set up the counter, and init the starting address */
-	mtctr	r3
-	li	r12, 0
-
-	/* bytes per transfer */
-	mr	r5, r8
-about_to_init_ecc:
-1:	mr	r3, r12
-	mr	r4, r12
-	bl	start_idma_transfer_0
-	bl	wait_for_idma_0
-	bl	stop_idma_engine_0
-	add	r12, r12, r8
-	bdnz	1b
-
-	mtlr	r7
-	blr
-
-	/* r3:	dest addr
-	 * r4:	source addr
-	 * r5:	byte count
-	 * r11: gt regbase
-	 * trashes:	 r6, r5
-	 */
-start_idma_transfer_0:
-	/* set the byte count, including the OWN bit */
-	mr	r6, r11
-	ori	r6, r6, CHANNEL0_DMA_BYTE_COUNT
-	stwbrx	r5, 0, (r6)
-
-	/* set the source address */
-	mr	r6, r11
-	ori	r6, r6, CHANNEL0_DMA_SOURCE_ADDRESS
-	stwbrx	r4, 0, (r6)
-
-	/* set the dest address */
-	mr	r6, r11
-	ori	r6, r6, CHANNEL0_DMA_DESTINATION_ADDRESS
-	stwbrx	r3, 0, (r6)
-
-	/* set the next record pointer */
-	li	r5, 0
-	mr	r6, r11
-	ori	r6, r6, CHANNEL0NEXT_RECORD_POINTER
-	stwbrx	r5, 0, (r6)
-
-	/* set the low control register */
-	/* bit 9 is NON chained mode, bit 31 is new style descriptors.
-	   bit 12 is channel enable */
-	ori	r5, r5, (1 << 12) | (1 << 12) | (1 << 11)
-	/* 15 shifted by 16 (oris) == bit 31 */
-	oris	r5, r5, (1 << 15)
-	mr	r6, r11
-	ori	r6, r6, CHANNEL0CONTROL
-	stwbrx	r5, 0, (r6)
-
-	blr
-
-	/* this waits for the bytecount to return to zero, indicating
-	 * that the trasfer is complete */
-wait_for_idma_0:
-	mr	r5, r11
-	lis	r6, 0xff
-	ori	r6, r6, 0xffff
-	ori	r5, r5, CHANNEL0_DMA_BYTE_COUNT
-1:	lwbrx	r4, 0, (r5)
-	and.	r4, r4, r6
-	bne	1b
-
-	blr
-
-	/* this turns off channel 0 of the idma engine */
-stop_idma_engine_0:
-	/* shut off the DMA engine */
-	li	r5, 0
-	mr	r6, r11
-	ori	r6, r6, CHANNEL0CONTROL
-	stwbrx	r5, 0, (r6)
-
-	blr
-#endif
-
-#ifdef CONFIG_SYS_BOARD_ASM_INIT
-	/* NOTE: trashes r3-r7 */
-	.globl board_asm_init
-board_asm_init:
-	/* just move the GT registers to where they belong */
-	lis	r3, CONFIG_SYS_DFL_GT_REGS@h
-	ori	r3, r3, CONFIG_SYS_DFL_GT_REGS@l
-	lis	r4, CONFIG_SYS_GT_REGS@h
-	ori	r4, r4, CONFIG_SYS_GT_REGS@l
-	li	r5, INTERNAL_SPACE_DECODE
-
-	/* test to see if we've already moved */
-	lwbrx	r6, r5, r4
-	andi.	r6, r6, 0xffff
-	/* check loading of R7 is: 0x0F80 should: 0xf800: DONE */
-/*	rlwinm	r7, r4, 8, 16, 31
-	rlwinm	r7, r4, 12, 16, 31	*/ /* original */
-	rlwinm	r7, r4, 16, 16, 31
-	/* -----------------------------------------------------*/
-	cmp	cr0, r7, r6
-	beqlr
-
-	/* nope, have to move the registers */
-	lwbrx	r6, r5, r3
-	andis.	r6, r6, 0xffff
-	or	r6, r6, r7
-	stwbrx	r6, r5, r3
-
-	/* now, poll for the change */
-1:	lwbrx	r7, r5, r4
-	cmp	cr0, r7, r6
-	bne	1b
-
-	lis	r3, CONFIG_SYS_INT_SRAM_BASE@h
-	ori	r3, r3, CONFIG_SYS_INT_SRAM_BASE@l
-	rlwinm  r3, r3, 16, 16, 31
-	lis	r4, CONFIG_SYS_GT_REGS@h
-	ori	r4, r4, CONFIG_SYS_GT_REGS@l
-	li	r5, INTEGRATED_SRAM_BASE_ADDR
-	stwbrx  r3, r5, r4
-
-2:	lwbrx	r6, r5, r4
-	cmp	cr0, r3, r6
-	bne	2b
-
-	/* done! */
-	blr
-#endif
-
-/* For use of the debug LEDs */
-	.global led_on0_relocated
-led_on0_relocated:
-	xor	r21, r21, r21
-	xor	r18, r18, r18
-	lis	r18, 0xFC80
-	ori	r18, r18, 0x8000
-/*	stw	r21, 0x0(r18)   */
-	sync
-	blr
-
-	.global led_off0_relocated
-led_off0_relocated:
-	xor	r21, r21, r21
-	xor	r18, r18, r18
-	lis	r18, 0xFC81
-	ori	r18, r18, 0x4000
-/*	stw	r21, 0x0(r18)   */
-	sync
-	blr
-
-	.global led_on0
-led_on0:
-	xor	r18, r18, r18
-	lis	r18, 0x1c80
-	ori	r18, r18, 0x8000
-/*	stw	r18, 0x0(r18)  */
-	sync
-	blr
-
-	.global led_off0
-led_off0:
-	xor	r18, r18, r18
-	lis	r18, 0x1c81
-	ori	r18, r18, 0x4000
-/*	stw	r18, 0x0(r18)  */
-	sync
-	blr
-
-	.global led_on1
-led_on1:
-	xor	r18, r18, r18
-	lis	r18, 0x1c80
-	ori	r18, r18, 0xc000
-/*	stw	r18, 0x0(r18)  */
-	sync
-	blr
-
-	.global led_off1
-led_off1:
-	xor	r18, r18, r18
-	lis	r18, 0x1c81
-	ori	r18, r18, 0x8000
-/*	stw	r18, 0x0(r18)  */
-	sync
-	blr
-
-	.global led_on2
-led_on2:
-	xor	r18, r18, r18
-	lis	r18, 0x1c81
-	ori	r18, r18, 0x0000
-/*	stw	r18, 0x0(r18)  */
-	sync
-	blr
-
-	.global led_off2
-led_off2:
-	xor	r18, r18, r18
-	lis	r18, 0x1c81
-	ori	r18, r18, 0xc000
-/*	stw	r18, 0x0(r18)  */
-	sync
-	blr