iMX28: Add support for DENX M28EVK board

This contains support for the following components:
- DUART
- MMC
- Both FEC interfaces
- NAND
- I2C (RTC, EEPROM)
- SPI (FLASH)

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>

2 files changed, 238 insertions, 0 deletions

diff --git a/board/denx/m28evk/Makefile b/board/denx/m28evk/Makefile
new file mode 100644
index 0000000000..e6aba9abfc
--- /dev/null
+++ b/board/denx/m28evk/Makefile
@@ -0,0 +1,43 @@
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).o
+
+COBJS	:= m28evk.o
+
+SRCS	:= $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/denx/m28evk/m28evk.c b/board/denx/m28evk/m28evk.c
new file mode 100644
index 0000000000..118e2222a5
--- /dev/null
+++ b/board/denx/m28evk/m28evk.c
@@ -0,0 +1,195 @@
+/*
+ * DENX M28 module
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/iomux-mx28.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
+#include <linux/mii.h>
+#include <miiphy.h>
+#include <netdev.h>
+#include <errno.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Functions
+ */
+int board_early_init_f(void)
+{
+	/* IO0 clock at 480MHz */
+	mx28_set_ioclk(MXC_IOCLK0, 480000);
+	/* IO1 clock at 480MHz */
+	mx28_set_ioclk(MXC_IOCLK1, 480000);
+
+	/* SSP0 clock at 96MHz */
+	mx28_set_sspclk(MXC_SSPCLK0, 96000, 0);
+	/* SSP2 clock at 96MHz */
+	mx28_set_sspclk(MXC_SSPCLK2, 96000, 0);
+
+	return 0;
+}
+
+int board_init(void)
+{
+	/* Adress of boot parameters */
+	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+
+	return 0;
+}
+
+int dram_init(void)
+{
+	/* dram_init must store complete ramsize in gd->ram_size */
+	gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE);
+	return 0;
+}
+
+#ifdef	CONFIG_CMD_MMC
+static int m28_mmc_wp(int id)
+{
+	if (id != 0) {
+		printf("MXS MMC: Invalid card selected (card id = %d)\n", id);
+		return 1;
+	}
+
+	return gpio_get_value(MX28_PAD_AUART2_CTS__GPIO_3_10);
+}
+
+int board_mmc_init(bd_t *bis)
+{
+	/* Configure WP as output */
+	gpio_direction_input(MX28_PAD_AUART2_CTS__GPIO_3_10);
+
+	return mxsmmc_initialize(bis, 0, m28_mmc_wp);
+}
+#endif
+
+#ifdef	CONFIG_CMD_NET
+
+#define	MII_OPMODE_STRAP_OVERRIDE	0x16
+#define	MII_PHY_CTRL1			0x1e
+#define	MII_PHY_CTRL2			0x1f
+
+int fecmxc_mii_postcall(int phy)
+{
+	miiphy_write("FEC1", phy, MII_BMCR, 0x9000);
+	miiphy_write("FEC1", phy, MII_OPMODE_STRAP_OVERRIDE, 0x0202);
+	if (phy == 3)
+		miiphy_write("FEC1", 3, MII_PHY_CTRL2, 0x8180);
+	return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+	struct mx28_clkctrl_regs *clkctrl_regs =
+		(struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
+	struct eth_device *dev;
+	int ret;
+
+	ret = cpu_eth_init(bis);
+
+	clrsetbits_le32(&clkctrl_regs->hw_clkctrl_enet,
+		CLKCTRL_ENET_TIME_SEL_MASK | CLKCTRL_ENET_CLK_OUT_EN,
+		CLKCTRL_ENET_TIME_SEL_RMII_CLK);
+
+	ret = fecmxc_initialize_multi(bis, 0, 0, MXS_ENET0_BASE);
+	if (ret) {
+		printf("FEC MXS: Unable to init FEC0\n");
+		return ret;
+	}
+
+	ret = fecmxc_initialize_multi(bis, 1, 3, MXS_ENET1_BASE);
+	if (ret) {
+		printf("FEC MXS: Unable to init FEC1\n");
+		return ret;
+	}
+
+	dev = eth_get_dev_by_name("FEC0");
+	if (!dev) {
+		printf("FEC MXS: Unable to get FEC0 device entry\n");
+		return -EINVAL;
+	}
+
+	ret = fecmxc_register_mii_postcall(dev, fecmxc_mii_postcall);
+	if (ret) {
+		printf("FEC MXS: Unable to register FEC0 mii postcall\n");
+		return ret;
+	}
+
+	dev = eth_get_dev_by_name("FEC1");
+	if (!dev) {
+		printf("FEC MXS: Unable to get FEC1 device entry\n");
+		return -EINVAL;
+	}
+
+	ret = fecmxc_register_mii_postcall(dev, fecmxc_mii_postcall);
+	if (ret) {
+		printf("FEC MXS: Unable to register FEC1 mii postcall\n");
+		return ret;
+	}
+
+	return ret;
+}
+
+#ifdef	CONFIG_M28_FEC_MAC_IN_OCOTP
+
+#define	MXS_OCOTP_MAX_TIMEOUT	1000000
+void imx_get_mac_from_fuse(char *mac)
+{
+	struct mx28_ocotp_regs *ocotp_regs =
+		(struct mx28_ocotp_regs *)MXS_OCOTP_BASE;
+	uint32_t data;
+
+	memset(mac, 0, 6);
+
+	writel(OCOTP_CTRL_RD_BANK_OPEN, &ocotp_regs->hw_ocotp_ctrl_set);
+
+	if (mx28_wait_mask_clr(&ocotp_regs->hw_ocotp_ctrl_reg, OCOTP_CTRL_BUSY,
+				MXS_OCOTP_MAX_TIMEOUT)) {
+		printf("MXS FEC: Can't get MAC from OCOTP\n");
+		return;
+	}
+
+	data = readl(&ocotp_regs->hw_ocotp_cust0);
+
+	mac[0] = 0x00;
+	mac[1] = 0x04;
+	mac[2] = (data >> 24) & 0xff;
+	mac[3] = (data >> 16) & 0xff;
+	mac[4] = (data >> 8) & 0xff;
+	mac[5] = data & 0xff;
+}
+#else
+void imx_get_mac_from_fuse(char *mac)
+{
+	memset(mac, 0, 6);
+}
+#endif
+
+#endif