OMAP3: Add Corscience Tricorder board

Tricorder is a board which is very similar to the Devkit8000. It
is designed as a base platform for further medical devices.

www.corscience.de/en/medical-engineering/products/multiparameter/mp10-board.html

Signed-off-by: Thomas Weber <weber@corscience.de>

1 files changed, 105 insertions, 0 deletions

diff --git a/board/corscience/tricorder/tricorder.c b/board/corscience/tricorder/tricorder.c
new file mode 100644
index 0000000000..435711a2ab
--- /dev/null
+++ b/board/corscience/tricorder/tricorder.c
@@ -0,0 +1,105 @@
+/*
+ * (C) Copyright 2012
+ * Corscience GmbH & Co. KG, <www.corscience.de>
+ * Thomas Weber <weber@corscience.de>
+ * Sunil Kumar <sunilsaini05@gmail.com>
+ * Shashi Ranjan <shashiranjanmca05@gmail.com>
+ *
+ * Derived from Devkit8000 code by
+ * Frederik Kriewitz <frederik@kriewitz.eu>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <twl4030.h>
+#include <asm/io.h>
+#include <asm/arch/mmc_host_def.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/mem.h>
+#include "tricorder.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Routine: board_init
+ * Description: Early hardware init.
+ */
+int board_init(void)
+{
+	gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
+	/* boot param addr */
+	gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
+
+	return 0;
+}
+
+/*
+ * Routine: misc_init_r
+ * Description: Configure board specific parts
+ */
+int misc_init_r(void)
+{
+	twl4030_power_init();
+#ifdef CONFIG_TWL4030_LED
+	twl4030_led_init(TWL4030_LED_LEDEN_LEDAON | TWL4030_LED_LEDEN_LEDBON);
+#endif
+
+	dieid_num_r();
+
+	return 0;
+}
+
+/*
+ * Routine: set_muxconf_regs
+ * Description: Setting up the configuration Mux registers specific to the
+ *		hardware. Many pins need to be moved from protect to primary
+ *		mode.
+ */
+void set_muxconf_regs(void)
+{
+	MUX_TRICORDER();
+}
+
+#if defined(CONFIG_GENERIC_MMC) && !(defined(CONFIG_SPL_BUILD))
+int board_mmc_init(bd_t *bis)
+{
+	return omap_mmc_init(0);
+}
+#endif
+
+/*
+ * Routine: get_board_mem_timings
+ * Description: If we use SPL then there is no x-loader nor config header
+ * so we have to setup the DDR timings ourself on the first bank.  This
+ * provides the timing values back to the function that configures
+ * the memory.  We have either one or two banks of 128MB DDR.
+ */
+void get_board_mem_timings(u32 *mcfg, u32 *ctrla, u32 *ctrlb, u32 *rfr_ctrl,
+				u32 *mr)
+{
+	/* General SDRC config */
+	*mcfg = MICRON_V_MCFG_165(128 << 20);
+	*rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz;
+
+	/* AC timings */
+	*ctrla = MICRON_V_ACTIMA_165;
+	*ctrlb = MICRON_V_ACTIMB_165;
+	*mr = MICRON_V_MR_165;
+}