Merge branch 'iu-boot/master' into 'u-boot-arm/master'

Conflicts:
	arch/arm/cpu/arm926ejs/mxs/Makefile
	board/compulab/cm_t35/Makefile
	board/corscience/tricorder/Makefile
	board/ppcag/bg0900/Makefile
	drivers/bootcount/Makefile
	include/configs/omap4_common.h
	include/configs/pdnb3.h

Makefile conflicts are due to additions/removals of
object files on the ARM branch vs KBuild introduction
on the main branch. Resolution consists in adjusting
the list of object files in the main branch version.
This also applies to two files which are not listed
as conflicting but had to be modified:

	board/compulab/common/Makefile
	board/udoo/Makefile

include/configs/omap4_common.h conflicts are due to
the OMAP4 conversion to ti_armv7_common.h on the ARM
side, and CONFIG_SYS_HZ removal on the main side.
Resolution is to convert as this icludes removal of
CONFIG_SYS_HZ.

include/configs/pdnb3.h is due to a removal on ARM side.
Trivial resolution is to remove the file.

Note: 'git show' will also list two files just because
they are new:

	include/configs/am335x_igep0033.h
	include/configs/omap3_igep00x0.h

6 files changed, 51 insertions, 36 deletions

diff --git a/board/compulab/cm_t35/Makefile b/board/compulab/cm_t35/Makefile
index 66b264a902..6e2e1cbb6a 100644
--- a/board/compulab/cm_t35/Makefile
+++ b/board/compulab/cm_t35/Makefile
@@ -7,7 +7,4 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-obj-$(CONFIG_DRIVER_OMAP34XX_I2C) += eeprom.o
-obj-$(CONFIG_LCD) += display.o
-
 obj-y	+= cm_t35.o leds.o
diff --git a/board/compulab/cm_t35/cm_t35.c b/board/compulab/cm_t35/cm_t35.c
index 19945c105e..b9a996594f 100644
--- a/board/compulab/cm_t35/cm_t35.c
+++ b/board/compulab/cm_t35/cm_t35.c
@@ -33,7 +33,7 @@
 #include <asm/ehci-omap.h>
 #include <asm/gpio.h>
 
-#include "eeprom.h"
+#include "../common/eeprom.h"
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -160,7 +160,7 @@ static u32 cm_t3x_rev;
 u32 get_board_rev(void)
 {
 	if (!cm_t3x_rev)
-		cm_t3x_rev = cm_t3x_eeprom_get_board_rev();
+		cm_t3x_rev = cl_eeprom_get_board_rev();
 
 	return cm_t3x_rev;
 };
@@ -509,7 +509,7 @@ static int handle_mac_address(void)
 	if (rc)
 		return 0;
 
-	rc = cm_t3x_eeprom_read_mac_addr(enetaddr);
+	rc = cl_eeprom_read_mac_addr(enetaddr);
 	if (rc)
 		return rc;
 
@@ -599,5 +599,4 @@ int ehci_hcd_stop(void)
 {
 	return omap_ehci_hcd_stop();
 }
-
 #endif /* CONFIG_USB_EHCI_OMAP */
diff --git a/board/compulab/common/Makefile b/board/compulab/common/Makefile
new file mode 100644
index 0000000000..831be2e0e7
--- /dev/null
+++ b/board/compulab/common/Makefile
@@ -0,0 +1,10 @@
+#
+# (C) Copyright 2011 - 2013 CompuLab, Ltd. <www.compulab.co.il>
+#
+# Author: Igor Grinberg <grinberg@compulab.co.il>
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-$(CONFIG_DRIVER_OMAP34XX_I2C) += eeprom.o
+obj-$(CONFIG_LCD) += omap3_display.o
diff --git a/board/compulab/cm_t35/eeprom.c b/board/compulab/common/eeprom.c
index df91acd4a7..5aa3dbd295 100644
--- a/board/compulab/cm_t35/eeprom.c
+++ b/board/compulab/common/eeprom.c
@@ -22,30 +22,30 @@
 #define LAYOUT_INVALID	0
 #define LAYOUT_LEGACY	0xff
 
-static int eeprom_layout; /* Implicitly LAYOUT_INVALID */
+static int cl_eeprom_layout; /* Implicitly LAYOUT_INVALID */
 
-static int cm_t3x_eeprom_read(uint offset, uchar *buf, int len)
+static int cl_eeprom_read(uint offset, uchar *buf, int len)
 {
 	return i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, offset,
 			CONFIG_SYS_I2C_EEPROM_ADDR_LEN, buf, len);
 }
 
-static int eeprom_setup_layout(void)
+static int cl_eeprom_setup_layout(void)
 {
 	int res;
 
-	if (eeprom_layout != LAYOUT_INVALID)
+	if (cl_eeprom_layout != LAYOUT_INVALID)
 		return 0;
 
-	res = cm_t3x_eeprom_read(EEPROM_LAYOUT_VER_OFFSET,
-						(uchar *)&eeprom_layout, 1);
+	res = cl_eeprom_read(EEPROM_LAYOUT_VER_OFFSET,
+			     (uchar *)&cl_eeprom_layout, 1);
 	if (res) {
-		eeprom_layout = LAYOUT_INVALID;
+		cl_eeprom_layout = LAYOUT_INVALID;
 		return res;
 	}
 
-	if (eeprom_layout == 0 || eeprom_layout >= 0x20)
-		eeprom_layout = LAYOUT_LEGACY;
+	if (cl_eeprom_layout == 0 || cl_eeprom_layout >= 0x20)
+		cl_eeprom_layout = LAYOUT_LEGACY;
 
 	return 0;
 }
@@ -56,12 +56,14 @@ void get_board_serial(struct tag_serialnr *serialnr)
 	uint offset;
 
 	memset(serialnr, 0, sizeof(*serialnr));
-	if (eeprom_setup_layout())
+
+	if (cl_eeprom_setup_layout())
 		return;
 
-	offset = (eeprom_layout != LAYOUT_LEGACY) ?
-			BOARD_SERIAL_OFFSET : BOARD_SERIAL_OFFSET_LEGACY;
-	if (cm_t3x_eeprom_read(offset, (uchar *)serial, 8))
+	offset = (cl_eeprom_layout != LAYOUT_LEGACY) ?
+		BOARD_SERIAL_OFFSET : BOARD_SERIAL_OFFSET_LEGACY;
+
+	if (cl_eeprom_read(offset, (uchar *)serial, 8))
 		return;
 
 	if (serial[0] != 0xffffffff && serial[1] != 0xffffffff) {
@@ -71,45 +73,46 @@ void get_board_serial(struct tag_serialnr *serialnr)
 }
 
 /*
- * Routine: cm_t3x_eeprom_read_mac_addr
+ * Routine: cl_eeprom_read_mac_addr
  * Description: read mac address and store it in buf.
  */
-int cm_t3x_eeprom_read_mac_addr(uchar *buf)
+int cl_eeprom_read_mac_addr(uchar *buf)
 {
 	uint offset;
 
-	if (eeprom_setup_layout())
+	if (cl_eeprom_setup_layout())
 		return 0;
 
-	offset = (eeprom_layout != LAYOUT_LEGACY) ?
+	offset = (cl_eeprom_layout != LAYOUT_LEGACY) ?
 			MAC_ADDR_OFFSET : MAC_ADDR_OFFSET_LEGACY;
-	return cm_t3x_eeprom_read(offset, buf, 6);
+
+	return cl_eeprom_read(offset, buf, 6);
 }
 
 /*
- * Routine: cm_t3x_eeprom_get_board_rev
+ * Routine: cl_eeprom_get_board_rev
  * Description: read system revision from eeprom
  */
-u32 cm_t3x_eeprom_get_board_rev(void)
+u32 cl_eeprom_get_board_rev(void)
 {
 	u32 rev = 0;
 	char str[5]; /* Legacy representation can contain at most 4 digits */
 	uint offset = BOARD_REV_OFFSET_LEGACY;
 
-	if (eeprom_setup_layout())
+	if (cl_eeprom_setup_layout())
 		return 0;
 
-	if (eeprom_layout != LAYOUT_LEGACY)
+	if (cl_eeprom_layout != LAYOUT_LEGACY)
 		offset = BOARD_REV_OFFSET;
 
-	if (cm_t3x_eeprom_read(offset, (uchar *)&rev, BOARD_REV_SIZE))
+	if (cl_eeprom_read(offset, (uchar *)&rev, BOARD_REV_SIZE))
 		return 0;
 
 	/*
 	 * Convert legacy syntactic representation to semantic
 	 * representation. i.e. for rev 1.00: 0x100 --> 0x64
 	 */
-	if (eeprom_layout == LAYOUT_LEGACY) {
+	if (cl_eeprom_layout == LAYOUT_LEGACY) {
 		sprintf(str, "%x", rev);
 		rev = simple_strtoul(str, NULL, 10);
 	}
diff --git a/board/compulab/cm_t35/eeprom.h b/board/compulab/common/eeprom.h
index 02ffbb1a99..cf8c302b2e 100644
--- a/board/compulab/cm_t35/eeprom.h
+++ b/board/compulab/common/eeprom.h
@@ -11,14 +11,14 @@
 #define _EEPROM_
 
 #ifdef CONFIG_DRIVER_OMAP34XX_I2C
-int cm_t3x_eeprom_read_mac_addr(uchar *buf);
-u32 cm_t3x_eeprom_get_board_rev(void);
+int cl_eeprom_read_mac_addr(uchar *buf);
+u32 cl_eeprom_get_board_rev(void);
 #else
-static inline int cm_t3x_eeprom_read_mac_addr(uchar *buf)
+static inline int cl_eeprom_read_mac_addr(uchar *buf)
 {
 	return 1;
 }
-static inline u32 cm_t3x_eeprom_get_board_rev(void)
+static inline u32 cl_eeprom_get_board_rev(void)
 {
 	return 0;
 }
diff --git a/board/compulab/cm_t35/display.c b/board/compulab/common/omap3_display.c
index fae8d95403..ead821eeb7 100644
--- a/board/compulab/cm_t35/display.c
+++ b/board/compulab/common/omap3_display.c
@@ -51,6 +51,7 @@ static const struct panel_config preset_dvi_640X480 = {
 	.lcd_size	= PANEL_LCD_SIZE(640, 480),
 	.timing_h	= DSS_HBP(48) | DSS_HFP(16) | DSS_HSW(96),
 	.timing_v	= DSS_VBP(33) | DSS_VFP(10) | DSS_VSW(2),
+	.pol_freq	= DSS_IHS | DSS_IVS | DSS_IPC,
 	.divisor	= 12 | (1 << 16),
 	.data_lines	= LCD_INTERFACE_24_BIT,
 	.panel_type	= ACTIVE_DISPLAY,
@@ -62,6 +63,7 @@ static const struct panel_config preset_dvi_800X600 = {
 	.lcd_size	= PANEL_LCD_SIZE(800, 600),
 	.timing_h	= DSS_HBP(88) | DSS_HFP(40) | DSS_HSW(128),
 	.timing_v	= DSS_VBP(23) | DSS_VFP(1) | DSS_VSW(4),
+	.pol_freq	= DSS_IHS | DSS_IVS | DSS_IPC,
 	.divisor	= 8 | (1 << 16),
 	.data_lines	= LCD_INTERFACE_24_BIT,
 	.panel_type	= ACTIVE_DISPLAY,
@@ -73,6 +75,7 @@ static const struct panel_config preset_dvi_1024X768 = {
 	.lcd_size	= PANEL_LCD_SIZE(1024, 768),
 	.timing_h	= DSS_HBP(160) | DSS_HFP(24) | DSS_HSW(136),
 	.timing_v	= DSS_VBP(29) | DSS_VFP(3) | DSS_VSW(6),
+	.pol_freq	= DSS_IHS | DSS_IVS | DSS_IPC,
 	.divisor	= 5 | (1 << 16),
 	.data_lines	= LCD_INTERFACE_24_BIT,
 	.panel_type	= ACTIVE_DISPLAY,
@@ -84,7 +87,8 @@ static const struct panel_config preset_dvi_1152X864 = {
 	.lcd_size	= PANEL_LCD_SIZE(1152, 864),
 	.timing_h	= DSS_HBP(256) | DSS_HFP(64) | DSS_HSW(128),
 	.timing_v	= DSS_VBP(32) | DSS_VFP(1) | DSS_VSW(3),
-	.divisor	= 3 | (1 << 16),
+	.pol_freq	= DSS_IHS | DSS_IVS | DSS_IPC,
+	.divisor	= 4 | (1 << 16),
 	.data_lines	= LCD_INTERFACE_24_BIT,
 	.panel_type	= ACTIVE_DISPLAY,
 	.load_mode	= 2,
@@ -95,6 +99,7 @@ static const struct panel_config preset_dvi_1280X960 = {
 	.lcd_size	= PANEL_LCD_SIZE(1280, 960),
 	.timing_h	= DSS_HBP(312) | DSS_HFP(96) | DSS_HSW(112),
 	.timing_v	= DSS_VBP(36) | DSS_VFP(1) | DSS_VSW(3),
+	.pol_freq	= DSS_IHS | DSS_IVS | DSS_IPC,
 	.divisor	= 3 | (1 << 16),
 	.data_lines	= LCD_INTERFACE_24_BIT,
 	.panel_type	= ACTIVE_DISPLAY,
@@ -106,6 +111,7 @@ static const struct panel_config preset_dvi_1280X1024 = {
 	.lcd_size	= PANEL_LCD_SIZE(1280, 1024),
 	.timing_h	= DSS_HBP(248) | DSS_HFP(48) | DSS_HSW(112),
 	.timing_v	= DSS_VBP(38) | DSS_VFP(1) | DSS_VSW(3),
+	.pol_freq	= DSS_IHS | DSS_IVS | DSS_IPC,
 	.divisor	= 3 | (1 << 16),
 	.data_lines	= LCD_INTERFACE_24_BIT,
 	.panel_type	= ACTIVE_DISPLAY,