Move the MPC8541/MPC8555/MPC8548 CDS board under board/freescale.

Minor path corrections needed to ensure buildability.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

22 files changed, 0 insertions, 3567 deletions

diff --git a/board/cds/common/cadmus.c b/board/cds/common/cadmus.c
deleted file mode 100644
index 5f86de5af2..0000000000
--- a/board/cds/common/cadmus.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * Copyright 2004 Freescale Semiconductor.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <common.h>
-
-
-/*
- * CADMUS Board System Registers
- */
-#ifndef CFG_CADMUS_BASE_REG
-#define CFG_CADMUS_BASE_REG	(CADMUS_BASE_ADDR + 0x4000)
-#endif
-
-typedef struct cadmus_reg {
-    u_char cm_ver;		/* Board version */
-    u_char cm_csr;		/* General control/status */
-    u_char cm_rst;		/* Reset control */
-    u_char cm_hsclk;		/* High speed clock */
-    u_char cm_hsxclk;		/* High speed clock extended */
-    u_char cm_led;		/* LED data */
-    u_char cm_pci;		/* PCI control/status */
-    u_char cm_dma;		/* DMA control */
-    u_char cm_reserved[248];	/* Total 256 bytes */
-} cadmus_reg_t;
-
-
-unsigned int
-get_board_version(void)
-{
-	volatile cadmus_reg_t *cadmus = (cadmus_reg_t *)CFG_CADMUS_BASE_REG;
-
-	return cadmus->cm_ver;
-}
-
-
-unsigned long
-get_clock_freq(void)
-{
-	volatile cadmus_reg_t *cadmus = (cadmus_reg_t *)CFG_CADMUS_BASE_REG;
-
-	uint pci1_speed = (cadmus->cm_pci >> 2) & 0x3; /* PSPEED in [4:5] */
-
-	if (pci1_speed == 0) {
-		return 33000000;
-	} else if (pci1_speed == 1) {
-		return 66000000;
-	} else {
-		/* Really, unknown. Be safe? */
-		return 33000000;
-	}
-}
-
-
-unsigned int
-get_pci_slot(void)
-{
-	volatile cadmus_reg_t *cadmus = (cadmus_reg_t *)CFG_CADMUS_BASE_REG;
-
-	/*
-	 * PCI slot in USER bits CSR[6:7] by convention.
-	 */
-	return ((cadmus->cm_csr >> 6) & 0x3) + 1;
-}
-
-
-unsigned int
-get_pci_dual(void)
-{
-	volatile cadmus_reg_t *cadmus = (cadmus_reg_t *)CFG_CADMUS_BASE_REG;
-
-	/*
-	 * PCI DUAL in CM_PCI[3]
-	 */
-	return cadmus->cm_pci & 0x10;
-}
diff --git a/board/cds/common/cadmus.h b/board/cds/common/cadmus.h
deleted file mode 100644
index 217ea64251..0000000000
--- a/board/cds/common/cadmus.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * Copyright 2004 Freescale Semiconductor.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CADMUS_H_
-#define __CADMUS_H_
-
-
-/*
- * CADMUS Board System Register interface.
- */
-
-/*
- * Returns board version register.
- */
-extern unsigned int get_board_version(void);
-
-/*
- * Returns either 33000000 or 66000000 as the SYS_CLK_FREQ.
- */
-extern unsigned long get_clock_freq(void);
-
-
-/*
- * Returns 1 - 4, as found in the USER CSR[6:7] bits.
- */
-extern unsigned int get_pci_slot(void);
-
-
-/*
- * Returns PCI DUAL as found in CM_PCI[3].
- */
-extern unsigned int get_pci_dual(void);
-
-
-#endif	/* __CADMUS_H_ */
diff --git a/board/cds/common/eeprom.c b/board/cds/common/eeprom.c
deleted file mode 100644
index 5034e0ca2e..0000000000
--- a/board/cds/common/eeprom.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * Copyright 2004 Freescale Semiconductor.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <common.h>
-#include <i2c.h>
-
-#include "eeprom.h"
-
-
-typedef struct {
-	char idee_pcbid[4];		/* "CCID" for CDC v1.X */
-	u8 idee_major;
-	u8 idee_minor;
-	char idee_serial[10];
-	char idee_errata[2];
-	char idee_date[8];		/* yyyymmdd */
-	/* The rest of the EEPROM space is reserved */
-} id_eeprom_t;
-
-
-unsigned int
-get_cpu_board_revision(void)
-{
-	uint major = 0;
-	uint minor = 0;
-
-	id_eeprom_t id_eeprom;
-
-	i2c_read(CFG_I2C_EEPROM_ADDR, 0, 2,
-		 (uchar *) &id_eeprom, sizeof(id_eeprom));
-
-	major = id_eeprom.idee_major;
-	minor = id_eeprom.idee_minor;
-
-	if (major == 0xff && minor == 0xff) {
-		major = minor = 0;
-	}
-
-	return MPC85XX_CPU_BOARD_REV(major,minor);
-}
diff --git a/board/cds/common/eeprom.h b/board/cds/common/eeprom.h
deleted file mode 100644
index 12a0789049..0000000000
--- a/board/cds/common/eeprom.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * Copyright 2004 Freescale Semiconductor.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __EEPROM_H_
-#define __EEPROM_H_
-
-
-/*
- * EEPROM Board System Register interface.
- */
-
-
-/*
- * CPU Board Revision
- */
-#define MPC85XX_CPU_BOARD_REV(maj, min)	((((maj)&0xff) << 8) | ((min) & 0xff))
-#define MPC85XX_CPU_BOARD_MAJOR(rev)	(((rev) >> 8) & 0xff)
-#define MPC85XX_CPU_BOARD_MINOR(rev)	((rev) & 0xff)
-
-#define MPC85XX_CPU_BOARD_REV_UNKNOWN	MPC85XX_CPU_BOARD_REV(0,0)
-#define MPC85XX_CPU_BOARD_REV_1_0	MPC85XX_CPU_BOARD_REV(1,0)
-#define MPC85XX_CPU_BOARD_REV_1_1	MPC85XX_CPU_BOARD_REV(1,1)
-
-/*
- * Returns CPU board revision register as a 16-bit value with
- * the Major in the high byte, and Minor in the low byte.
- */
-extern unsigned int get_cpu_board_revision(void);
-
-
-#endif	/* __CADMUS_H_ */
diff --git a/board/cds/common/ft_board.c b/board/cds/common/ft_board.c
deleted file mode 100644
index 6f221aff26..0000000000
--- a/board/cds/common/ft_board.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * Copyright 2004 Freescale Semiconductor.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <libfdt.h>
-#include <fdt_support.h>
-#include "cadmus.h"
-
-#if defined(CONFIG_OF_BOARD_SETUP)
-static void cds_pci_fixup(void *blob)
-{
-	int node, tmp[2];
-	const char *path;
-	int len, slot, i;
-	u32 *map = NULL;
-
-	node = fdt_path_offset(blob, "/aliases");
-	tmp[0] = 0;
-	if (node >= 0) {
-		path = fdt_getprop(blob, node, "pci0", NULL);
-		if (path) {
-			node = fdt_path_offset(blob, path);
-			if (node >= 0) {
-				map = fdt_getprop_w(blob, node, "interrupt-map", &len);
-			}
-		}
-	}
-
-	if (map) {
-		len /= sizeof(u32);
-
-		slot = get_pci_slot();
-
-		for (i=0;i<len;i+=7) {
-			/* We rotate the interrupt pins so that the mapping
-			 * changes depending on the slot the carrier card is in.
-			 */
-			map[3] = ((map[3] + slot - 2) % 4) + 1;
-			map+=7;
-		}
-	}
-}
-
-void
-ft_board_setup(void *blob, bd_t *bd)
-{
-	ft_cpu_setup(blob, bd);
-#ifdef CONFIG_PCI
-	ft_pci_setup(blob, bd);
-	cds_pci_fixup(blob);
-#endif
-}
-#endif
diff --git a/board/cds/common/via.c b/board/cds/common/via.c
deleted file mode 100644
index 4a63d77944..0000000000
--- a/board/cds/common/via.c
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * Copyright 2006 Freescale Semiconductor.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <pci.h>
-
-/* Config the VIA chip */
-void mpc85xx_config_via(struct pci_controller *hose,
-			pci_dev_t dev, struct pci_config_table *tab)
-{
-	pci_dev_t bridge;
-	unsigned int cmdstat;
-
-	/* Enable USB and IDE functions */
-	pci_hose_write_config_byte(hose, dev, 0x48, 0x08);
-
-	pci_hose_read_config_dword(hose, dev, PCI_COMMAND, &cmdstat);
-	cmdstat |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY| PCI_COMMAND_MASTER;
-	pci_hose_write_config_dword(hose, dev, PCI_COMMAND, cmdstat);
-	pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08);
-	pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
-
-	/*
-	 * Force the backplane P2P bridge to have a window
-	 * open from 0x00000000-0x00001fff in PCI I/O space.
-	 * This allows legacy I/O (i8259, etc) on the VIA
-	 * southbridge to be accessed.
-	 */
-	bridge = PCI_BDF(0,BRIDGE_ID,0);
-	pci_hose_write_config_byte(hose, bridge, PCI_IO_BASE, 0);
-	pci_hose_write_config_word(hose, bridge, PCI_IO_BASE_UPPER16, 0);
-	pci_hose_write_config_byte(hose, bridge, PCI_IO_LIMIT, 0x10);
-	pci_hose_write_config_word(hose, bridge, PCI_IO_LIMIT_UPPER16, 0);
-}
-
-/* Function 1, IDE */
-void mpc85xx_config_via_usbide(struct pci_controller *hose,
-			       pci_dev_t dev, struct pci_config_table *tab)
-{
-	pciauto_config_device(hose, dev);
-	/*
-	 * Since the P2P window was forced to cover the fixed
-	 * legacy I/O addresses, it is necessary to manually
-	 * place the base addresses for the IDE and USB functions
-	 * within this window.
-	 */
-	pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_0, 0x1ff8);
-	pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_1, 0x1ff4);
-	pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_2, 0x1fe8);
-	pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_3, 0x1fe4);
-	pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_4, 0x1fd0);
-}
-
-/* Function 2, USB ports 0-1 */
-void mpc85xx_config_via_usb(struct pci_controller *hose,
-			    pci_dev_t dev, struct pci_config_table *tab)
-{
-	pciauto_config_device(hose, dev);
-
-	pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_4, 0x1fa0);
-}
-
-/* Function 3, USB ports 2-3 */
-void mpc85xx_config_via_usb2(struct pci_controller *hose,
-			     pci_dev_t dev, struct pci_config_table *tab)
-{
-	pciauto_config_device(hose, dev);
-
-	pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_4, 0x1f80);
-}
-
-/* Function 5, Power Management */
-void mpc85xx_config_via_power(struct pci_controller *hose,
-			      pci_dev_t dev, struct pci_config_table *tab)
-{
-	pciauto_config_device(hose, dev);
-
-	pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_0, 0x1e00);
-	pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_1, 0x1dfc);
-	pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_2, 0x1df8);
-}
-
-/* Function 6, AC97 Interface */
-void mpc85xx_config_via_ac97(struct pci_controller *hose,
-			     pci_dev_t dev, struct pci_config_table *tab)
-{
-	pciauto_config_device(hose, dev);
-
-	pci_hose_write_config_dword(hose, dev, PCI_BASE_ADDRESS_0, 0x1c00);
-}
diff --git a/board/cds/common/via.h b/board/cds/common/via.h
deleted file mode 100644
index 77cfacc526..0000000000
--- a/board/cds/common/via.h
+++ /dev/null
@@ -1,18 +0,0 @@
-#ifndef _MPC85xx_VIA_H
-void mpc85xx_config_via(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *tab);
-
-/* Function 1, IDE */
-void mpc85xx_config_via_usbide(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *tab);
-
-/* Function 2, USB ports 0-1 */
-void mpc85xx_config_via_usb(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *tab);
-
-/* Function 3, USB ports 2-3 */
-void mpc85xx_config_via_usb2(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *tab);
-
-/* Function 5, Power Management */
-void mpc85xx_config_via_power(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *tab);
-
-/* Function 6, AC97 Interface */
-void mpc85xx_config_via_ac97(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *tab);
-#endif /* _MPC85xx_VIA_H */
diff --git a/board/cds/mpc8541cds/Makefile b/board/cds/mpc8541cds/Makefile
deleted file mode 100644
index 7f53098850..0000000000
--- a/board/cds/mpc8541cds/Makefile
+++ /dev/null
@@ -1,60 +0,0 @@
-#
-# Copyright 2004 Freescale Semiconductor.
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-ifneq ($(OBJTREE),$(SRCTREE))
-$(shell mkdir -p $(obj)../common)
-endif
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	:= $(BOARD).o \
-	   ../common/cadmus.o \
-	   ../common/eeprom.o \
-	   ../common/ft_board.o \
-	   ../common/via.o
-
-SOBJS	:= init.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-clean:
-	rm -f $(OBJS) $(SOBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/cds/mpc8541cds/config.mk b/board/cds/mpc8541cds/config.mk
deleted file mode 100644
index 17cc8bce9c..0000000000
--- a/board/cds/mpc8541cds/config.mk
+++ /dev/null
@@ -1,30 +0,0 @@
-#
-# Copyright 2004 Freescale Semiconductor.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# mpc8541cds board
-#
-TEXT_BASE = 0xfff80000
-
-PLATFORM_CPPFLAGS += -DCONFIG_E500=1
-PLATFORM_CPPFLAGS += -DCONFIG_MPC85xx=1
-PLATFORM_CPPFLAGS += -DCONFIG_MPC8541=1
diff --git a/board/cds/mpc8541cds/init.S b/board/cds/mpc8541cds/init.S
deleted file mode 100644
index 978bda5e4d..0000000000
--- a/board/cds/mpc8541cds/init.S
+++ /dev/null
@@ -1,255 +0,0 @@
-/*
- * Copyright 2004 Freescale Semiconductor.
- * Copyright 2002,2003, Motorola Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-#include <asm/cache.h>
-#include <asm/mmu.h>
-#include <config.h>
-#include <mpc85xx.h>
-
-
-/*
- * TLB0 and TLB1 Entries
- *
- * Out of reset, TLB1's Entry 0 maps the highest 4K for CCSRBAR.
- * However, CCSRBAR is then relocated to CFG_CCSRBAR right after
- * these TLB entries are established.
- *
- * The TLB entries for DDR are dynamically setup in spd_sdram()
- * and use TLB1 Entries 8 through 15 as needed according to the
- * size of DDR memory.
- *
- * MAS0: tlbsel, esel, nv
- * MAS1: valid, iprot, tid, ts, tsize
- * MAS2: epn, sharen, x0, x1, w, i, m, g, e
- * MAS3: rpn, u0-u3, ux, sx, uw, sw, ur, sr
- */
-
-#define	entry_start \
-	mflr	r1 	;	\
-	bl	0f 	;
-
-#define	entry_end \
-0:	mflr	r0	;	\
-	mtlr	r1	;	\
-	blr		;
-
-
-	.section	.bootpg, "ax"
-	.globl	tlb1_entry
-tlb1_entry:
-	entry_start
-
-	/*
-	 * Number of TLB0 and TLB1 entries in the following table
-	 */
-	.long 13
-
-#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
-	/*
-	 * TLB0		4K	Non-cacheable, guarded
-	 * 0xff700000	4K	Initial CCSRBAR mapping
-	 *
-	 * This ends up at a TLB0 Index==0 entry, and must not collide
-	 * with other TLB0 Entries.
-	 */
-	.long TLB1_MAS0(0, 0, 0)
-	.long TLB1_MAS1(1, 0, 0, 0, 0)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,0,1,0,1,0,1)
-#else
-#error("Update the number of table entries in tlb1_entry")
-#endif
-
-	/*
-	 * TLB0		16K	Cacheable, non-guarded
-	 * 0xd001_0000	16K	Temporary Global data for initialization
-	 *
-	 * Use four 4K TLB0 entries.  These entries must be cacheable
-	 * as they provide the bootstrap memory before the memory
-	 * controler and real memory have been configured.
-	 *
-	 * These entries end up at TLB0 Indicies 0x10, 0x14, 0x18 and 0x1c,
-	 * and must not collide with other TLB0 entries.
-	 */
-	.long TLB1_MAS0(0, 0, 0)
-	.long TLB1_MAS1(1, 0, 0, 0, 0)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR),
-			0,0,0,0,0,0,0,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR),
-			0,0,0,0,0,1,0,1,0,1)
-
-	.long TLB1_MAS0(0, 0, 0)
-	.long TLB1_MAS1(1, 0, 0, 0, 0)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 4 * 1024),
-			0,0,0,0,0,0,0,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 4 * 1024),
-			0,0,0,0,0,1,0,1,0,1)
-
-	.long TLB1_MAS0(0, 0, 0)
-	.long TLB1_MAS1(1, 0, 0, 0, 0)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 8 * 1024),
-			0,0,0,0,0,0,0,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 8 * 1024),
-			0,0,0,0,0,1,0,1,0,1)
-
-	.long TLB1_MAS0(0, 0, 0)
-	.long TLB1_MAS1(1, 0, 0, 0, 0)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 12 * 1024),
-			0,0,0,0,0,0,0,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 12 * 1024),
-			0,0,0,0,0,1,0,1,0,1)
-
-
-	/*
-	 * TLB 0:	16M	Non-cacheable, guarded
-	 * 0xff000000	16M	FLASH
-	 * Out of reset this entry is only 4K.
-	 */
-	.long TLB1_MAS0(1, 0, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_FLASH_BASE), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_FLASH_BASE), 0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 1:	256M	Non-cacheable, guarded
-	 * 0x80000000	256M	PCI1 MEM First half
-	 */
-	.long TLB1_MAS0(1, 1, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE), 0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 2:	256M	Non-cacheable, guarded
-	 * 0x90000000	256M	PCI1 MEM Second half
-	 */
-	.long TLB1_MAS0(1, 2, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE + 0x10000000),
-			0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE + 0x10000000),
-			0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 3:	256M	Non-cacheable, guarded
-	 * 0xa0000000	256M	PCI2 MEM First half
-	 */
-	.long TLB1_MAS0(1, 3, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_PCI2_MEM_BASE), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_PCI2_MEM_BASE), 0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 4:	256M	Non-cacheable, guarded
-	 * 0xb0000000	256M	PCI2 MEM Second half
-	 */
-	.long TLB1_MAS0(1, 4, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_PCI2_MEM_BASE + 0x10000000),
-			0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_PCI2_MEM_BASE + 0x10000000),
-			0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 5:	64M	Non-cacheable, guarded
-	 * 0xe000_0000	1M	CCSRBAR
-	 * 0xe200_0000	16M	PCI1 IO
-	 * 0xe300_0000	16M	PCI2 IO
-	 */
-	.long TLB1_MAS0(1, 5, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR), 0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 6:	64M	Cacheable, non-guarded
-	 * 0xf000_0000	64M	LBC SDRAM
-	 */
-	.long TLB1_MAS0(1, 6, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_LBC_SDRAM_BASE), 0,0,0,0,0,0,0,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_LBC_SDRAM_BASE), 0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 7:	1M	Non-cacheable, guarded
-	 * 0xf8000000	1M	CADMUS registers
-	 */
-	.long TLB1_MAS0(1, 7, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1M)
-	.long TLB1_MAS2(E500_TLB_EPN(CADMUS_BASE_ADDR), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CADMUS_BASE_ADDR), 0,0,0,0,0,1,0,1,0,1)
-
-	entry_end
-
-/*
- * LAW(Local Access Window) configuration:
- *
- * 0x0000_0000     0x7fff_ffff     DDR                     2G
- * 0x8000_0000     0x9fff_ffff     PCI1 MEM                512M
- * 0xa000_0000     0xbfff_ffff     PCI2 MEM                512M
- * 0xe000_0000     0xe000_ffff     CCSR                    1M
- * 0xe200_0000     0xe20f_ffff     PCI1 IO                 1M
- * 0xe210_0000     0xe21f_ffff     PCI2 IO                 1M
- * 0xf000_0000     0xf7ff_ffff     SDRAM                   128M
- * 0xf800_0000     0xf80f_ffff     NVRAM/CADMUS (*)        1M
- * 0xff00_0000     0xff7f_ffff     FLASH (2nd bank)        8M
- * 0xff80_0000     0xffff_ffff     FLASH (boot bank)       8M
- *
- * Notes:
- *    CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
- *    If flash is 8M at default position (last 8M), no LAW needed.
- *
- * The defines below are 1-off of the actual LAWAR0 usage.
- * So LAWAR3 define uses the LAWAR4 register in the ECM.
- */
-
-#define LAWBAR0 0
-#define LAWAR0  ((LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN)
-
-#define LAWBAR1 ((CFG_PCI1_MEM_BASE>>12) & 0xfffff)
-#define LAWAR1 	(LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M))
-
-#define LAWBAR2 ((CFG_PCI2_MEM_BASE>>12) & 0xfffff)
-#define LAWAR2 	(LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_512M))
-
-#define LAWBAR3 ((CFG_PCI1_IO_PHYS>>12) & 0xfffff)
-#define LAWAR3 	(LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_1M))
-
-#define LAWBAR4 ((CFG_PCI2_IO_PHYS>>12) & 0xfffff)
-#define LAWAR4 	(LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_1M))
-
-/* LBC window - maps 256M 0xf0000000 -> 0xffffffff */
-#define LAWBAR5 ((CFG_LBC_SDRAM_BASE>>12) & 0xfffff)
-#define LAWAR5 	(LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M))
-
-	.section .bootpg, "ax"
-	.globl	law_entry
-
-law_entry:
-	entry_start
-	.long 6
-	.long LAWBAR0,LAWAR0,LAWBAR1,LAWAR1,LAWBAR2,LAWAR2,LAWBAR3,LAWAR3
-	.long LAWBAR4,LAWAR4,LAWBAR5,LAWAR5
-	entry_end
diff --git a/board/cds/mpc8541cds/mpc8541cds.c b/board/cds/mpc8541cds/mpc8541cds.c
deleted file mode 100644
index 9ab98d4b68..0000000000
--- a/board/cds/mpc8541cds/mpc8541cds.c
+++ /dev/null
@@ -1,534 +0,0 @@
-/*
- * Copyright 2004 Freescale Semiconductor.
- *
- * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <pci.h>
-#include <asm/processor.h>
-#include <asm/immap_85xx.h>
-#include <ioports.h>
-#include <spd.h>
-#include <libfdt.h>
-#include <fdt_support.h>
-
-#include "../common/cadmus.h"
-#include "../common/eeprom.h"
-#include "../common/via.h"
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-extern void ddr_enable_ecc(unsigned int dram_size);
-#endif
-
-extern long int spd_sdram(void);
-
-void local_bus_init(void);
-void sdram_init(void);
-
-/*
- * I/O Port configuration table
- *
- * if conf is 1, then that port pin will be configured at boot time
- * according to the five values podr/pdir/ppar/psor/pdat for that entry
- */
-
-const iop_conf_t iop_conf_tab[4][32] = {
-
-    /* Port A configuration */
-    {   /*            conf ppar psor pdir podr pdat */
-	/* PA31 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 TxENB */
-	/* PA30 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 TxClav   */
-	/* PA29 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 TxSOC  */
-	/* PA28 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 RxENB */
-	/* PA27 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 RxSOC */
-	/* PA26 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 RxClav */
-	/* PA25 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[0] */
-	/* PA24 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[1] */
-	/* PA23 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[2] */
-	/* PA22 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[3] */
-	/* PA21 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[4] */
-	/* PA20 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[5] */
-	/* PA19 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[6] */
-	/* PA18 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[7] */
-	/* PA17 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[7] */
-	/* PA16 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[6] */
-	/* PA15 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[5] */
-	/* PA14 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[4] */
-	/* PA13 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[3] */
-	/* PA12 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[2] */
-	/* PA11 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[1] */
-	/* PA10 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[0] */
-	/* PA9  */ {   0,   1,   1,   1,   0,   0   }, /* FCC1 L1TXD */
-	/* PA8  */ {   0,   1,   1,   0,   0,   0   }, /* FCC1 L1RXD */
-	/* PA7  */ {   0,   0,   0,   1,   0,   0   }, /* PA7 */
-	/* PA6  */ {   0,   1,   1,   1,   0,   0   }, /* TDM A1 L1RSYNC */
-	/* PA5  */ {   0,   0,   0,   1,   0,   0   }, /* PA5 */
-	/* PA4  */ {   0,   0,   0,   1,   0,   0   }, /* PA4 */
-	/* PA3  */ {   0,   0,   0,   1,   0,   0   }, /* PA3 */
-	/* PA2  */ {   0,   0,   0,   1,   0,   0   }, /* PA2 */
-	/* PA1  */ {   1,   0,   0,   0,   0,   0   }, /* FREERUN */
-	/* PA0  */ {   0,   0,   0,   1,   0,   0   }  /* PA0 */
-    },
-
-    /* Port B configuration */
-    {   /*            conf ppar psor pdir podr pdat */
-	/* PB31 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TX_ER */
-	/* PB30 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_DV */
-	/* PB29 */ {   1,   1,   1,   1,   0,   0   }, /* FCC2 MII TX_EN */
-	/* PB28 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_ER */
-	/* PB27 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII COL */
-	/* PB26 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII CRS */
-	/* PB25 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[3] */
-	/* PB24 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[2] */
-	/* PB23 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[1] */
-	/* PB22 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[0] */
-	/* PB21 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[0] */
-	/* PB20 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[1] */
-	/* PB19 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[2] */
-	/* PB18 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[3] */
-	/* PB17 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RX_DIV */
-	/* PB16 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RX_ERR */
-	/* PB15 */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TX_ERR */
-	/* PB14 */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TX_EN */
-	/* PB13 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:COL */
-	/* PB12 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:CRS */
-	/* PB11 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
-	/* PB10 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
-	/* PB9  */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
-	/* PB8  */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
-	/* PB7  */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
-	/* PB6  */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
-	/* PB5  */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
-	/* PB4  */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
-	/* PB3  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PB2  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PB1  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PB0  */ {   0,   0,   0,   0,   0,   0   }  /* pin doesn't exist */
-    },
-
-    /* Port C */
-    {   /*            conf ppar psor pdir podr pdat */
-	/* PC31 */ {   0,   0,   0,   1,   0,   0   }, /* PC31 */
-	/* PC30 */ {   0,   0,   0,   1,   0,   0   }, /* PC30 */
-	/* PC29 */ {   0,   1,   1,   0,   0,   0   }, /* SCC1 EN *CLSN */
-	/* PC28 */ {   0,   0,   0,   1,   0,   0   }, /* PC28 */
-	/* PC27 */ {   0,   0,   0,   1,   0,   0   }, /* UART Clock in */
-	/* PC26 */ {   0,   0,   0,   1,   0,   0   }, /* PC26 */
-	/* PC25 */ {   0,   0,   0,   1,   0,   0   }, /* PC25 */
-	/* PC24 */ {   0,   0,   0,   1,   0,   0   }, /* PC24 */
-	/* PC23 */ {   0,   1,   0,   1,   0,   0   }, /* ATMTFCLK */
-	/* PC22 */ {   0,   1,   0,   0,   0,   0   }, /* ATMRFCLK */
-	/* PC21 */ {   0,   1,   0,   0,   0,   0   }, /* SCC1 EN RXCLK */
-	/* PC20 */ {   0,   1,   0,   0,   0,   0   }, /* SCC1 EN TXCLK */
-	/* PC19 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_CLK CLK13 */
-	/* PC18 */ {   1,   1,   0,   0,   0,   0   }, /* FCC Tx Clock (CLK14) */
-	/* PC17 */ {   0,   0,   0,   1,   0,   0   }, /* PC17 */
-	/* PC16 */ {   0,   1,   0,   0,   0,   0   }, /* FCC Tx Clock (CLK16) */
-	/* PC15 */ {   1,   1,   0,   0,   0,   0   }, /* PC15 */
-	/* PC14 */ {   0,   1,   0,   0,   0,   0   }, /* SCC1 EN *CD */
-	/* PC13 */ {   0,   0,   0,   1,   0,   0   }, /* PC13 */
-	/* PC12 */ {   0,   1,   0,   1,   0,   0   }, /* PC12 */
-	/* PC11 */ {   0,   0,   0,   1,   0,   0   }, /* LXT971 transmit control */
-	/* PC10 */ {   1,   0,   0,   1,   0,   0   }, /* FETHMDC */
-	/* PC9  */ {   1,   0,   0,   0,   0,   0   }, /* FETHMDIO */
-	/* PC8  */ {   0,   0,   0,   1,   0,   0   }, /* PC8 */
-	/* PC7  */ {   0,   0,   0,   1,   0,   0   }, /* PC7 */
-	/* PC6  */ {   0,   0,   0,   1,   0,   0   }, /* PC6 */
-	/* PC5  */ {   0,   0,   0,   1,   0,   0   }, /* PC5 */
-	/* PC4  */ {   0,   0,   0,   1,   0,   0   }, /* PC4 */
-	/* PC3  */ {   0,   0,   0,   1,   0,   0   }, /* PC3 */
-	/* PC2  */ {   0,   0,   0,   1,   0,   1   }, /* ENET FDE */
-	/* PC1  */ {   0,   0,   0,   1,   0,   0   }, /* ENET DSQE */
-	/* PC0  */ {   0,   0,   0,   1,   0,   0   }, /* ENET LBK */
-    },
-
-    /* Port D */
-    {   /*            conf ppar psor pdir podr pdat */
-	/* PD31 */ {   1,   1,   0,   0,   0,   0   }, /* SCC1 EN RxD */
-	/* PD30 */ {   1,   1,   1,   1,   0,   0   }, /* SCC1 EN TxD */
-	/* PD29 */ {   1,   1,   0,   1,   0,   0   }, /* SCC1 EN TENA */
-	/* PD28 */ {   0,   1,   0,   0,   0,   0   }, /* PD28 */
-	/* PD27 */ {   0,   1,   1,   1,   0,   0   }, /* PD27 */
-	/* PD26 */ {   0,   0,   0,   1,   0,   0   }, /* PD26 */
-	/* PD25 */ {   0,   0,   0,   1,   0,   0   }, /* PD25 */
-	/* PD24 */ {   0,   0,   0,   1,   0,   0   }, /* PD24 */
-	/* PD23 */ {   0,   0,   0,   1,   0,   0   }, /* PD23 */
-	/* PD22 */ {   0,   0,   0,   1,   0,   0   }, /* PD22 */
-	/* PD21 */ {   0,   0,   0,   1,   0,   0   }, /* PD21 */
-	/* PD20 */ {   0,   0,   0,   1,   0,   0   }, /* PD20 */
-	/* PD19 */ {   0,   0,   0,   1,   0,   0   }, /* PD19 */
-	/* PD18 */ {   0,   0,   0,   1,   0,   0   }, /* PD18 */
-	/* PD17 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXPRTY */
-	/* PD16 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXPRTY */
-	/* PD15 */ {   0,   1,   1,   0,   1,   0   }, /* I2C SDA */
-	/* PD14 */ {   0,   0,   0,   1,   0,   0   }, /* LED */
-	/* PD13 */ {   0,   0,   0,   0,   0,   0   }, /* PD13 */
-	/* PD12 */ {   0,   0,   0,   0,   0,   0   }, /* PD12 */
-	/* PD11 */ {   0,   0,   0,   0,   0,   0   }, /* PD11 */
-	/* PD10 */ {   0,   0,   0,   0,   0,   0   }, /* PD10 */
-	/* PD9  */ {   0,   1,   0,   1,   0,   0   }, /* SMC1 TXD */
-	/* PD8  */ {   0,   1,   0,   0,   0,   0   }, /* SMC1 RXD */
-	/* PD7  */ {   0,   0,   0,   1,   0,   1   }, /* PD7 */
-	/* PD6  */ {   0,   0,   0,   1,   0,   1   }, /* PD6 */
-	/* PD5  */ {   0,   0,   0,   1,   0,   1   }, /* PD5 */
-	/* PD4  */ {   0,   0,   0,   1,   0,   1   }, /* PD4 */
-	/* PD3  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PD2  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PD1  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PD0  */ {   0,   0,   0,   0,   0,   0   }  /* pin doesn't exist */
-    }
-};
-
-int board_early_init_f (void)
-{
-	return 0;
-}
-
-int checkboard (void)
-{
-	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
-
-	/* PCI slot in USER bits CSR[6:7] by convention. */
-	uint pci_slot = get_pci_slot ();
-
-	uint pci_dual = get_pci_dual ();	/* PCI DUAL in CM_PCI[3] */
-	uint pci1_32 = gur->pordevsr & 0x10000;	/* PORDEVSR[15] */
-	uint pci1_clk_sel = gur->porpllsr & 0x8000;	/* PORPLLSR[16] */
-	uint pci2_clk_sel = gur->porpllsr & 0x4000;	/* PORPLLSR[17] */
-
-	uint pci1_speed = get_clock_freq ();	/* PCI PSPEED in [4:5] */
-
-	uint cpu_board_rev = get_cpu_board_revision ();
-
-	printf ("Board: CDS Version 0x%02x, PCI Slot %d\n",
-		get_board_version (), pci_slot);
-
-	printf ("CPU Board Revision %d.%d (0x%04x)\n",
-		MPC85XX_CPU_BOARD_MAJOR (cpu_board_rev),
-		MPC85XX_CPU_BOARD_MINOR (cpu_board_rev), cpu_board_rev);
-
-	printf ("    PCI1: %d bit, %s MHz, %s\n",
-		(pci1_32) ? 32 : 64,
-		(pci1_speed == 33000000) ? "33" :
-		(pci1_speed == 66000000) ? "66" : "unknown",
-		pci1_clk_sel ? "sync" : "async");
-
-	if (pci_dual) {
-		printf ("    PCI2: 32 bit, 66 MHz, %s\n",
-			pci2_clk_sel ? "sync" : "async");
-	} else {
-		printf ("    PCI2: disabled\n");
-	}
-
-	/*
-	 * Initialize local bus.
-	 */
-	local_bus_init ();
-
-	return 0;
-}
-
-long int
-initdram(int board_type)
-{
-	long dram_size = 0;
-
-	puts("Initializing\n");
-
-#if defined(CONFIG_DDR_DLL)
-	{
-		/*
-		 * Work around to stabilize DDR DLL MSYNC_IN.
-		 * Errata DDR9 seems to have been fixed.
-		 * This is now the workaround for Errata DDR11:
-		 *    Override DLL = 1, Course Adj = 1, Tap Select = 0
-		 */
-
-		volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
-
-		gur->ddrdllcr = 0x81000000;
-		asm("sync;isync;msync");
-		udelay(200);
-	}
-#endif
-	dram_size = spd_sdram();
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-	/*
-	 * Initialize and enable DDR ECC.
-	 */
-	ddr_enable_ecc(dram_size);
-#endif
-	/*
-	 * SDRAM Initialization
-	 */
-	sdram_init();
-
-	puts("    DDR: ");
-	return dram_size;
-}
-
-/*
- * Initialize Local Bus
- */
-void
-local_bus_init(void)
-{
-	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
-	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
-
-	uint clkdiv;
-	uint lbc_hz;
-	sys_info_t sysinfo;
-	uint temp_lbcdll;
-
-	/*
-	 * Errata LBC11.
-	 * Fix Local Bus clock glitch when DLL is enabled.
-	 *
-	 * If localbus freq is < 66Mhz, DLL bypass mode must be used.
-	 * If localbus freq is > 133Mhz, DLL can be safely enabled.
-	 * Between 66 and 133, the DLL is enabled with an override workaround.
-	 */
-
-	get_sys_info(&sysinfo);
-	clkdiv = lbc->lcrr & 0x0f;
-	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
-
-	if (lbc_hz < 66) {
-		lbc->lcrr |= 0x80000000;	/* DLL Bypass */
-
-	} else if (lbc_hz >= 133) {
-		lbc->lcrr &= (~0x80000000);		/* DLL Enabled */
-
-	} else {
-		lbc->lcrr &= (~0x8000000);	/* DLL Enabled */
-		udelay(200);
-
-		/*
-		 * Sample LBC DLL ctrl reg, upshift it to set the
-		 * override bits.
-		 */
-		temp_lbcdll = gur->lbcdllcr;
-		gur->lbcdllcr = (((temp_lbcdll & 0xff) << 16) | 0x80000000);
-		asm("sync;isync;msync");
-	}
-}
-
-/*
- * Initialize SDRAM memory on the Local Bus.
- */
-void
-sdram_init(void)
-{
-#if defined(CFG_OR2_PRELIM) && defined(CFG_BR2_PRELIM)
-
-	uint idx;
-	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
-	uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE;
-	uint cpu_board_rev;
-	uint lsdmr_common;
-
-	puts("    SDRAM: ");
-
-	print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
-
-	/*
-	 * Setup SDRAM Base and Option Registers
-	 */
-	lbc->or2 = CFG_OR2_PRELIM;
-	asm("msync");
-
-	lbc->br2 = CFG_BR2_PRELIM;
-	asm("msync");
-
-	lbc->lbcr = CFG_LBC_LBCR;
-	asm("msync");
-
-
-	lbc->lsrt = CFG_LBC_LSRT;
-	lbc->mrtpr = CFG_LBC_MRTPR;
-	asm("msync");
-
-	/*
-	 * Determine which address lines to use baed on CPU board rev.
-	 */
-	cpu_board_rev = get_cpu_board_revision();
-	lsdmr_common = CFG_LBC_LSDMR_COMMON;
-	if (cpu_board_rev == MPC85XX_CPU_BOARD_REV_1_0) {
-		lsdmr_common |= CFG_LBC_LSDMR_BSMA1617;
-	} else if (cpu_board_rev == MPC85XX_CPU_BOARD_REV_1_1) {
-		lsdmr_common |= CFG_LBC_LSDMR_BSMA1516;
-	} else {
-		/*
-		 * Assume something unable to identify itself is
-		 * really old, and likely has lines 16/17 mapped.
-		 */
-		lsdmr_common |= CFG_LBC_LSDMR_BSMA1617;
-	}
-
-	/*
-	 * Issue PRECHARGE ALL command.
-	 */
-	lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_PCHALL;
-	asm("sync;msync");
-	*sdram_addr = 0xff;
-	ppcDcbf((unsigned long) sdram_addr);
-	udelay(100);
-
-	/*
-	 * Issue 8 AUTO REFRESH commands.
-	 */
-	for (idx = 0; idx < 8; idx++) {
-		lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_ARFRSH;
-		asm("sync;msync");
-		*sdram_addr = 0xff;
-		ppcDcbf((unsigned long) sdram_addr);
-		udelay(100);
-	}
-
-	/*
-	 * Issue 8 MODE-set command.
-	 */
-	lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_MRW;
-	asm("sync;msync");
-	*sdram_addr = 0xff;
-	ppcDcbf((unsigned long) sdram_addr);
-	udelay(100);
-
-	/*
-	 * Issue NORMAL OP command.
-	 */
-	lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_NORMAL;
-	asm("sync;msync");
-	*sdram_addr = 0xff;
-	ppcDcbf((unsigned long) sdram_addr);
-	udelay(200);    /* Overkill. Must wait > 200 bus cycles */
-
-#endif	/* enable SDRAM init */
-}
-
-#if defined(CFG_DRAM_TEST)
-int
-testdram(void)
-{
-	uint *pstart = (uint *) CFG_MEMTEST_START;
-	uint *pend = (uint *) CFG_MEMTEST_END;
-	uint *p;
-
-	printf("Testing DRAM from 0x%08x to 0x%08x\n",
-	       CFG_MEMTEST_START,
-	       CFG_MEMTEST_END);
-
-	printf("DRAM test phase 1:\n");
-	for (p = pstart; p < pend; p++)
-		*p = 0xaaaaaaaa;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0xaaaaaaaa) {
-			printf ("DRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-
-	printf("DRAM test phase 2:\n");
-	for (p = pstart; p < pend; p++)
-		*p = 0x55555555;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0x55555555) {
-			printf ("DRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-
-	printf("DRAM test passed.\n");
-	return 0;
-}
-#endif
-
-#if defined(CONFIG_PCI)
-/* For some reason the Tundra PCI bridge shows up on itself as a
- * different device.  Work around that by refusing to configure it.
- */
-void dummy_func(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *tab) { }
-
-static struct pci_config_table pci_mpc85xxcds_config_table[] = {
-	{0x10e3, 0x0513, PCI_ANY_ID, 1, 3, PCI_ANY_ID, dummy_func, {0,0,0}},
-	{0x1106, 0x0686, PCI_ANY_ID, 1, VIA_ID, 0, mpc85xx_config_via, {0,0,0}},
-	{0x1106, 0x0571, PCI_ANY_ID, 1, VIA_ID, 1,
-		mpc85xx_config_via_usbide, {0,0,0}},
-	{0x1105, 0x3038, PCI_ANY_ID, 1, VIA_ID, 2,
-		mpc85xx_config_via_usb, {0,0,0}},
-	{0x1106, 0x3038, PCI_ANY_ID, 1, VIA_ID, 3,
-		mpc85xx_config_via_usb2, {0,0,0}},
-	{0x1106, 0x3058, PCI_ANY_ID, 1, VIA_ID, 5,
-		mpc85xx_config_via_power, {0,0,0}},
-	{0x1106, 0x3068, PCI_ANY_ID, 1, VIA_ID, 6,
-		mpc85xx_config_via_ac97, {0,0,0}},
-	{},
-};
-
-static struct pci_controller hose[] = {
-	{ config_table: pci_mpc85xxcds_config_table,},
-#ifdef CONFIG_MPC85XX_PCI2
-	{},
-#endif
-};
-
-#endif	/* CONFIG_PCI */
-
-void
-pci_init_board(void)
-{
-#ifdef CONFIG_PCI
-	pci_mpc85xx_init(hose);
-#endif
-}
-
-#if defined(CONFIG_OF_BOARD_SETUP)
-void
-ft_pci_setup(void *blob, bd_t *bd)
-{
-	int node, tmp[2];
-	const char *path;
-
-	node = fdt_path_offset(blob, "/aliases");
-	tmp[0] = 0;
-	if (node >= 0) {
-#ifdef CONFIG_PCI1
-		path = fdt_getprop(blob, node, "pci0", NULL);
-		if (path) {
-			tmp[1] = hose[0].last_busno - hose[0].first_busno;
-			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
-		}
-#endif
-#ifdef CONFIG_MPC85XX_PCI2
-		path = fdt_getprop(blob, node, "pci1", NULL);
-		if (path) {
-			tmp[1] = hose[1].last_busno - hose[1].first_busno;
-			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
-		}
-#endif
-	}
-}
-#endif
diff --git a/board/cds/mpc8541cds/u-boot.lds b/board/cds/mpc8541cds/u-boot.lds
deleted file mode 100644
index 7a5daefeb7..0000000000
--- a/board/cds/mpc8541cds/u-boot.lds
+++ /dev/null
@@ -1,150 +0,0 @@
-/*
- * Copyright 2004 Freescale Semiconductor.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  .resetvec 0xFFFFFFFC :
-  {
-    *(.resetvec)
-  } = 0xffff
-
-  .bootpg 0xFFFFF000 :
-  {
-    cpu/mpc85xx/start.o	(.bootpg)
-    board/cds/mpc8541cds/init.o (.bootpg)
-  } = 0xffff
-
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    cpu/mpc85xx/start.o	(.text)
-    board/cds/mpc8541cds/init.o (.text)
-    cpu/mpc85xx/traps.o (.text)
-    cpu/mpc85xx/interrupts.o (.text)
-    cpu/mpc85xx/cpu_init.o (.text)
-    cpu/mpc85xx/cpu.o (.text)
-    drivers/net/tsec.o (.text)
-    cpu/mpc85xx/speed.o (.text)
-    cpu/mpc85xx/pci.o (.text)
-    common/dlmalloc.o (.text)
-    lib_generic/crc32.o (.text)
-    lib_ppc/extable.o (.text)
-    lib_generic/zlib.o (.text)
-    *(.text)
-    *(.fixup)
-    *(.got1)
-   }
-    _etext = .;
-    PROVIDE (etext = .);
-    .rodata    :
-   {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
-  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/cds/mpc8548cds/Makefile b/board/cds/mpc8548cds/Makefile
deleted file mode 100644
index 7f53098850..0000000000
--- a/board/cds/mpc8548cds/Makefile
+++ /dev/null
@@ -1,60 +0,0 @@
-#
-# Copyright 2004 Freescale Semiconductor.
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-ifneq ($(OBJTREE),$(SRCTREE))
-$(shell mkdir -p $(obj)../common)
-endif
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	:= $(BOARD).o \
-	   ../common/cadmus.o \
-	   ../common/eeprom.o \
-	   ../common/ft_board.o \
-	   ../common/via.o
-
-SOBJS	:= init.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-clean:
-	rm -f $(OBJS) $(SOBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/cds/mpc8548cds/config.mk b/board/cds/mpc8548cds/config.mk
deleted file mode 100644
index b23bc8737d..0000000000
--- a/board/cds/mpc8548cds/config.mk
+++ /dev/null
@@ -1,32 +0,0 @@
-#
-# Copyright 2004, 2007 Freescale Semiconductor.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# mpc8548cds board
-#
-ifndef TEXT_BASE
-TEXT_BASE = 0xfff80000
-endif
-
-PLATFORM_CPPFLAGS += -DCONFIG_E500=1
-PLATFORM_CPPFLAGS += -DCONFIG_MPC85xx=1
-PLATFORM_CPPFLAGS += -DCONFIG_MPC8548=1
diff --git a/board/cds/mpc8548cds/init.S b/board/cds/mpc8548cds/init.S
deleted file mode 100644
index a83a0952c3..0000000000
--- a/board/cds/mpc8548cds/init.S
+++ /dev/null
@@ -1,263 +0,0 @@
-/*
- * Copyright 2004, 2007 Freescale Semiconductor.
- * Copyright 2002,2003, Motorola Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-#include <asm/cache.h>
-#include <asm/mmu.h>
-#include <config.h>
-#include <mpc85xx.h>
-
-/*
- * TLB0 and TLB1 Entries
- *
- * Out of reset, TLB1's Entry 0 maps the highest 4K for CCSRBAR.
- * However, CCSRBAR is then relocated to CFG_CCSRBAR right after
- * these TLB entries are established.
- *
- * The TLB entries for DDR are dynamically setup in spd_sdram()
- * and use TLB1 Entries 8 through 15 as needed according to the
- * size of DDR memory.
- *
- * MAS0: tlbsel, esel, nv
- * MAS1: valid, iprot, tid, ts, tsize
- * MAS2: epn, sharen, x0, x1, w, i, m, g, e
- * MAS3: rpn, u0-u3, ux, sx, uw, sw, ur, sr
- */
-
-#define	entry_start \
-	mflr	r1	;	\
-	bl	0f	;
-
-#define	entry_end \
-0:	mflr	r0	;	\
-	mtlr	r1	;	\
-	blr		;
-
-
-	.section	.bootpg, "ax"
-	.globl	tlb1_entry
-tlb1_entry:
-	entry_start
-
-	/*
-	 * Number of TLB0 and TLB1 entries in the following table
-	 */
-	.long (2f-1f)/16
-
-1:
-#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
-	/*
-	 * TLB0		4K	Non-cacheable, guarded
-	 * 0xff700000	4K	Initial CCSRBAR mapping
-	 *
-	 * This ends up at a TLB0 Index==0 entry, and must not collide
-	 * with other TLB0 Entries.
-	 */
-	.long TLB1_MAS0(0, 0, 0)
-	.long TLB1_MAS1(1, 0, 0, 0, 0)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,0,1,0,1,0,1)
-#else
-#error("Update the number of table entries in tlb1_entry")
-#endif
-
-	/*
-	 * TLB0		16K	Cacheable, guarded
-	 * Temporary Global data for initialization
-	 *
-	 * Use four 4K TLB0 entries.  These entries must be cacheable
-	 * as they provide the bootstrap memory before the memory
-	 * controler and real memory have been configured.
-	 *
-	 * These entries end up at TLB0 Indicies 0x10, 0x14, 0x18 and 0x1c,
-	 * and must not collide with other TLB0 entries.
-	 */
-	.long TLB1_MAS0(0, 0, 0)
-	.long TLB1_MAS1(1, 0, 0, 0, 0)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR),
-			0,0,0,0,0,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR),
-			0,0,0,0,0,1,0,1,0,1)
-
-	.long TLB1_MAS0(0, 0, 0)
-	.long TLB1_MAS1(1, 0, 0, 0, 0)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 4 * 1024),
-			0,0,0,0,0,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 4 * 1024),
-			0,0,0,0,0,1,0,1,0,1)
-
-	.long TLB1_MAS0(0, 0, 0)
-	.long TLB1_MAS1(1, 0, 0, 0, 0)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 8 * 1024),
-			0,0,0,0,0,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 8 * 1024),
-			0,0,0,0,0,1,0,1,0,1)
-
-	.long TLB1_MAS0(0, 0, 0)
-	.long TLB1_MAS1(1, 0, 0, 0, 0)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 12 * 1024),
-			0,0,0,0,0,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 12 * 1024),
-			0,0,0,0,0,1,0,1,0,1)
-
-
-	/*
-	 * TLB 0:	16M	Non-cacheable, guarded
-	 * 0xff000000	16M	FLASH
-	 * Out of reset this entry is only 4K.
-	 */
-	.long TLB1_MAS0(1, 0, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_BOOT_BLOCK), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_BOOT_BLOCK), 0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 1:	1G	Non-cacheable, guarded
-	 * 0x80000000	1G	PCI1/PCIE  8,9,a,b
-	 */
-	.long TLB1_MAS0(1, 1, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1G)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_PCI_PHYS), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_PCI_PHYS), 0,0,0,0,0,1,0,1,0,1)
-
-#ifdef CFG_RIO_MEM_PHYS
-	/*
-	 * TLB 2:	256M	Non-cacheable, guarded
-	 */
-	.long TLB1_MAS0(1, 2, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_RIO_MEM_PHYS),
-			0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_RIO_MEM_PHYS),	0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 3:	256M	Non-cacheable, guarded
-	 */
-	.long TLB1_MAS0(1, 3, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_RIO_MEM_PHYS + 0x10000000),
-			0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_RIO_MEM_PHYS + 0x10000000),
-			0,0,0,0,0,1,0,1,0,1)
-#endif
-	/*
-	 * TLB 5:	64M	Non-cacheable, guarded
-	 * 0xe000_0000	1M	CCSRBAR
-	 * 0xe200_0000	1M	PCI1 IO
-	 * 0xe210_0000	1M	PCI2 IO
-	 * 0xe300_0000	1M	PCIe IO
-	 */
-	.long TLB1_MAS0(1, 5, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR), 0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 6:	64M	Cacheable, non-guarded
-	 * 0xf000_0000	64M	LBC SDRAM
-	 */
-	.long TLB1_MAS0(1, 6, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_LBC_CACHE_BASE), 0,0,0,0,0,0,0,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_LBC_CACHE_BASE), 0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 7:	64M	Non-cacheable, guarded
-	 * 0xf8000000	64M	CADMUS registers, relocated L2SRAM
-	 */
-	.long TLB1_MAS0(1, 7, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_LBC_NONCACHE_BASE), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_LBC_NONCACHE_BASE), 0,0,0,0,0,1,0,1,0,1)
-
-2:
-	entry_end
-
-/*
- * LAW(Local Access Window) configuration:
- *
- * 0x0000_0000     0x7fff_ffff     DDR                     2G
- * 0x8000_0000     0x9fff_ffff     PCI1 MEM                512M
- * 0xa000_0000     0xbfff_ffff     PCIe MEM                512M
- * 0xc000_0000     0xdfff_ffff     RapidIO                 512M
- * 0xe000_0000     0xe000_ffff     CCSR                    1M
- * 0xe200_0000     0xe10f_ffff     PCI1 IO                 1M
- * 0xe280_0000     0xe20f_ffff     PCI2 IO                 1M
- * 0xe300_0000     0xe30f_ffff     PCIe IO                 1M
- * 0xf000_0000     0xf3ff_ffff     SDRAM                   64M
- * 0xf800_0000     0xf80f_ffff     NVRAM/CADMUS (*)        1M
- * 0xff00_0000     0xff7f_ffff     FLASH (2nd bank)        8M
- * 0xff80_0000     0xffff_ffff     FLASH (boot bank)       8M
- *
- * Notes:
- *    CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
- *    If flash is 8M at default position (last 8M), no LAW needed.
- *
- * LAW 0 is reserved for boot mapping
- */
-
-	.section .bootpg, "ax"
-	.globl	law_entry
-law_entry:
-	entry_start
-
-	.long (4f-3f)/8
-3:
-	.long  0
-	.long  (LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN
-
-#ifdef CFG_PCI1_MEM_PHYS
-	.long	(CFG_PCI1_MEM_PHYS>>12) & 0xfffff
-	.long	LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M)
-
-	.long	(CFG_PCI1_IO_PHYS>>12) & 0xfffff
-	.long	LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_1M)
-#endif
-
-#ifdef CFG_PCI2_MEM_PHYS
-	.long	(CFG_PCI2_MEM_PHYS>>12) & 0xfffff
-	.long	LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_512M)
-
-	.long	(CFG_PCI2_IO_PHYS>>12) & 0xfffff
-	.long	LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_1M)
-#endif
-
-#ifdef CFG_PCIE1_MEM_PHYS
-	.long	(CFG_PCIE1_MEM_PHYS>>12) & 0xfffff
-	.long	LAWAR_EN | LAWAR_TRGT_IF_PCIE1 | (LAWAR_SIZE & LAWAR_SIZE_512M)
-
-	.long	(CFG_PCIE1_IO_PHYS>>12) & 0xfffff
-	.long	LAWAR_EN | LAWAR_TRGT_IF_PCIE1 | (LAWAR_SIZE & LAWAR_SIZE_1M)
-#endif
-
-	/* LBC window - maps 256M 0xf0000000 -> 0xffffffff */
-	.long	(CFG_LBC_CACHE_BASE>>12) & 0xfffff
-	.long	LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M)
-
-#ifdef CFG_RIO_MEM_PHYS
-	.long	(CFG_RIO_MEM_PHYS>>12) & 0xfffff
-	.long	LAWAR_EN | LAWAR_TRGT_IF_RIO | (LAWAR_SIZE & LAWAR_SIZE_512M)
-#endif
-4:
-	entry_end
diff --git a/board/cds/mpc8548cds/mpc8548cds.c b/board/cds/mpc8548cds/mpc8548cds.c
deleted file mode 100644
index 47e2dd86cb..0000000000
--- a/board/cds/mpc8548cds/mpc8548cds.c
+++ /dev/null
@@ -1,547 +0,0 @@
-/*
- * Copyright 2004, 2007 Freescale Semiconductor.
- *
- * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <pci.h>
-#include <asm/processor.h>
-#include <asm/immap_85xx.h>
-#include <asm/immap_fsl_pci.h>
-#include <spd.h>
-#include <miiphy.h>
-#include <libfdt.h>
-#include <fdt_support.h>
-
-#include "../common/cadmus.h"
-#include "../common/eeprom.h"
-#include "../common/via.h"
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-extern void ddr_enable_ecc(unsigned int dram_size);
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-extern long int spd_sdram(void);
-
-void local_bus_init(void);
-void sdram_init(void);
-
-int board_early_init_f (void)
-{
-	return 0;
-}
-
-int checkboard (void)
-{
-	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
-	volatile ccsr_local_ecm_t *ecm = (void *)(CFG_MPC85xx_ECM_ADDR);
-
-	/* PCI slot in USER bits CSR[6:7] by convention. */
-	uint pci_slot = get_pci_slot ();
-
-	uint cpu_board_rev = get_cpu_board_revision ();
-
-	printf ("Board: CDS Version 0x%02x, PCI Slot %d\n",
-		get_board_version (), pci_slot);
-
-	printf ("CPU Board Revision %d.%d (0x%04x)\n",
-		MPC85XX_CPU_BOARD_MAJOR (cpu_board_rev),
-		MPC85XX_CPU_BOARD_MINOR (cpu_board_rev), cpu_board_rev);
-	/*
-	 * Initialize local bus.
-	 */
-	local_bus_init ();
-
-	/*
-	 * Fix CPU2 errata: A core hang possible while executing a
-	 * msync instruction and a snoopable transaction from an I/O
-	 * master tagged to make quick forward progress is present.
-	 */
-	ecm->eebpcr |= (1 << 16);
-
-	/*
-	 * Hack TSEC 3 and 4 IO voltages.
-	 */
-	gur->tsec34ioovcr = 0xe7e0;	/*  1110 0111 1110 0xxx */
-
-	ecm->eedr = 0xffffffff;		/* clear ecm errors */
-	ecm->eeer = 0xffffffff;		/* enable ecm errors */
-	return 0;
-}
-
-long int
-initdram(int board_type)
-{
-	long dram_size = 0;
-
-	puts("Initializing\n");
-
-#if defined(CONFIG_DDR_DLL)
-	{
-		/*
-		 * Work around to stabilize DDR DLL MSYNC_IN.
-		 * Errata DDR9 seems to have been fixed.
-		 * This is now the workaround for Errata DDR11:
-		 *    Override DLL = 1, Course Adj = 1, Tap Select = 0
-		 */
-
-		volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
-
-		gur->ddrdllcr = 0x81000000;
-		asm("sync;isync;msync");
-		udelay(200);
-	}
-#endif
-	dram_size = spd_sdram();
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-	/*
-	 * Initialize and enable DDR ECC.
-	 */
-	ddr_enable_ecc(dram_size);
-#endif
-	/*
-	 * SDRAM Initialization
-	 */
-	sdram_init();
-
-	puts("    DDR: ");
-	return dram_size;
-}
-
-/*
- * Initialize Local Bus
- */
-void
-local_bus_init(void)
-{
-	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
-	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
-
-	uint clkdiv;
-	uint lbc_hz;
-	sys_info_t sysinfo;
-
-	get_sys_info(&sysinfo);
-	clkdiv = (lbc->lcrr & 0x0f) * 2;
-	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
-
-	gur->lbiuiplldcr1 = 0x00078080;
-	if (clkdiv == 16) {
-		gur->lbiuiplldcr0 = 0x7c0f1bf0;
-	} else if (clkdiv == 8) {
-		gur->lbiuiplldcr0 = 0x6c0f1bf0;
-	} else if (clkdiv == 4) {
-		gur->lbiuiplldcr0 = 0x5c0f1bf0;
-	}
-
-	lbc->lcrr |= 0x00030000;
-
-	asm("sync;isync;msync");
-
-	lbc->ltesr = 0xffffffff;	/* Clear LBC error interrupts */
-	lbc->lteir = 0xffffffff;	/* Enable LBC error interrupts */
-}
-
-/*
- * Initialize SDRAM memory on the Local Bus.
- */
-void
-sdram_init(void)
-{
-#if defined(CFG_OR2_PRELIM) && defined(CFG_BR2_PRELIM)
-
-	uint idx;
-	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
-	uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE;
-	uint cpu_board_rev;
-	uint lsdmr_common;
-
-	puts("    SDRAM: ");
-
-	print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
-
-	/*
-	 * Setup SDRAM Base and Option Registers
-	 */
-	lbc->or2 = CFG_OR2_PRELIM;
-	asm("msync");
-
-	lbc->br2 = CFG_BR2_PRELIM;
-	asm("msync");
-
-	lbc->lbcr = CFG_LBC_LBCR;
-	asm("msync");
-
-
-	lbc->lsrt = CFG_LBC_LSRT;
-	lbc->mrtpr = CFG_LBC_MRTPR;
-	asm("msync");
-
-	/*
-	 * MPC8548 uses "new" 15-16 style addressing.
-	 */
-	cpu_board_rev = get_cpu_board_revision();
-	lsdmr_common = CFG_LBC_LSDMR_COMMON;
-	lsdmr_common |= CFG_LBC_LSDMR_BSMA1516;
-
-	/*
-	 * Issue PRECHARGE ALL command.
-	 */
-	lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_PCHALL;
-	asm("sync;msync");
-	*sdram_addr = 0xff;
-	ppcDcbf((unsigned long) sdram_addr);
-	udelay(100);
-
-	/*
-	 * Issue 8 AUTO REFRESH commands.
-	 */
-	for (idx = 0; idx < 8; idx++) {
-		lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_ARFRSH;
-		asm("sync;msync");
-		*sdram_addr = 0xff;
-		ppcDcbf((unsigned long) sdram_addr);
-		udelay(100);
-	}
-
-	/*
-	 * Issue 8 MODE-set command.
-	 */
-	lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_MRW;
-	asm("sync;msync");
-	*sdram_addr = 0xff;
-	ppcDcbf((unsigned long) sdram_addr);
-	udelay(100);
-
-	/*
-	 * Issue NORMAL OP command.
-	 */
-	lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_NORMAL;
-	asm("sync;msync");
-	*sdram_addr = 0xff;
-	ppcDcbf((unsigned long) sdram_addr);
-	udelay(200);    /* Overkill. Must wait > 200 bus cycles */
-
-#endif	/* enable SDRAM init */
-}
-
-#if defined(CFG_DRAM_TEST)
-int
-testdram(void)
-{
-	uint *pstart = (uint *) CFG_MEMTEST_START;
-	uint *pend = (uint *) CFG_MEMTEST_END;
-	uint *p;
-
-	printf("Testing DRAM from 0x%08x to 0x%08x\n",
-	       CFG_MEMTEST_START,
-	       CFG_MEMTEST_END);
-
-	printf("DRAM test phase 1:\n");
-	for (p = pstart; p < pend; p++)
-		*p = 0xaaaaaaaa;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0xaaaaaaaa) {
-			printf ("DRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-
-	printf("DRAM test phase 2:\n");
-	for (p = pstart; p < pend; p++)
-		*p = 0x55555555;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0x55555555) {
-			printf ("DRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-
-	printf("DRAM test passed.\n");
-	return 0;
-}
-#endif
-
-#if defined(CONFIG_PCI) || defined(CONFIG_PCI1)
-/* For some reason the Tundra PCI bridge shows up on itself as a
- * different device.  Work around that by refusing to configure it.
- */
-void dummy_func(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *tab) { }
-
-static struct pci_config_table pci_mpc85xxcds_config_table[] = {
-	{0x10e3, 0x0513, PCI_ANY_ID, 1, 3, PCI_ANY_ID, dummy_func, {0,0,0}},
-	{0x1106, 0x0686, PCI_ANY_ID, 1, VIA_ID, 0, mpc85xx_config_via, {0,0,0}},
-	{0x1106, 0x0571, PCI_ANY_ID, 1, VIA_ID, 1,
-		mpc85xx_config_via_usbide, {0,0,0}},
-	{0x1105, 0x3038, PCI_ANY_ID, 1, VIA_ID, 2,
-		mpc85xx_config_via_usb, {0,0,0}},
-	{0x1106, 0x3038, PCI_ANY_ID, 1, VIA_ID, 3,
-		mpc85xx_config_via_usb2, {0,0,0}},
-	{0x1106, 0x3058, PCI_ANY_ID, 1, VIA_ID, 5,
-		mpc85xx_config_via_power, {0,0,0}},
-	{0x1106, 0x3068, PCI_ANY_ID, 1, VIA_ID, 6,
-		mpc85xx_config_via_ac97, {0,0,0}},
-	{},
-};
-
-static struct pci_controller pci1_hose = {
-	config_table: pci_mpc85xxcds_config_table};
-#endif	/* CONFIG_PCI */
-
-#ifdef CONFIG_PCI2
-static struct pci_controller pci2_hose;
-#endif	/* CONFIG_PCI2 */
-
-#ifdef CONFIG_PCIE1
-static struct pci_controller pcie1_hose;
-#endif	/* CONFIG_PCIE1 */
-
-int first_free_busno=0;
-
-void
-pci_init_board(void)
-{
-	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
-	uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
-	uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;
-
-
-#ifdef CONFIG_PCI1
-{
-	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI1_ADDR;
-	extern void fsl_pci_init(struct pci_controller *hose);
-	struct pci_controller *hose = &pci1_hose;
-	struct pci_config_table *table;
-
-	uint pci_32 = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_PCI32;	/* PORDEVSR[15] */
-	uint pci_arb = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_ARB;	/* PORDEVSR[14] */
-	uint pci_clk_sel = gur->porpllsr & MPC85xx_PORDEVSR_PCI1_SPD;	/* PORPLLSR[16] */
-
-	uint pci_agent = (host_agent == 3) || (host_agent == 4 ) || (host_agent == 6);
-
-	uint pci_speed = get_clock_freq ();	/* PCI PSPEED in [4:5] */
-
-	if (!(gur->devdisr & MPC85xx_DEVDISR_PCI1)) {
-		printf ("    PCI: %d bit, %s MHz, %s, %s, %s\n",
-			(pci_32) ? 32 : 64,
-			(pci_speed == 33333000) ? "33" :
-			(pci_speed == 66666000) ? "66" : "unknown",
-			pci_clk_sel ? "sync" : "async",
-			pci_agent ? "agent" : "host",
-			pci_arb ? "arbiter" : "external-arbiter"
-			);
-
-
-		/* inbound */
-		pci_set_region(hose->regions + 0,
-			       CFG_PCI_MEMORY_BUS,
-			       CFG_PCI_MEMORY_PHYS,
-			       CFG_PCI_MEMORY_SIZE,
-			       PCI_REGION_MEM | PCI_REGION_MEMORY);
-
-
-		/* outbound memory */
-		pci_set_region(hose->regions + 1,
-			       CFG_PCI1_MEM_BASE,
-			       CFG_PCI1_MEM_PHYS,
-			       CFG_PCI1_MEM_SIZE,
-			       PCI_REGION_MEM);
-
-		/* outbound io */
-		pci_set_region(hose->regions + 2,
-			       CFG_PCI1_IO_BASE,
-			       CFG_PCI1_IO_PHYS,
-			       CFG_PCI1_IO_SIZE,
-			       PCI_REGION_IO);
-		hose->region_count = 3;
-
-		/* relocate config table pointers */
-		hose->config_table = \
-			(struct pci_config_table *)((uint)hose->config_table + gd->reloc_off);
-		for (table = hose->config_table; table && table->vendor; table++)
-			table->config_device += gd->reloc_off;
-
-		hose->first_busno=first_free_busno;
-		pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
-
-		fsl_pci_init(hose);
-		first_free_busno=hose->last_busno+1;
-		printf ("PCI on bus %02x - %02x\n",hose->first_busno,hose->last_busno);
-#ifdef CONFIG_PCIX_CHECK
-		if (!(gur->pordevsr & PORDEVSR_PCI)) {
-			/* PCI-X init */
-			if (CONFIG_SYS_CLK_FREQ < 66000000)
-				printf("PCI-X will only work at 66 MHz\n");
-
-			reg16 = PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ
-				| PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E;
-			pci_hose_write_config_word(hose, bus, PCIX_COMMAND, reg16);
-		}
-#endif
-	} else {
-		printf ("    PCI: disabled\n");
-	}
-}
-#else
-	gur->devdisr |= MPC85xx_DEVDISR_PCI1; /* disable */
-#endif
-
-#ifdef CONFIG_PCI2
-{
-	uint pci2_clk_sel = gur->porpllsr & 0x4000;	/* PORPLLSR[17] */
-	uint pci_dual = get_pci_dual ();	/* PCI DUAL in CM_PCI[3] */
-	if (pci_dual) {
-		printf ("    PCI2: 32 bit, 66 MHz, %s\n",
-			pci2_clk_sel ? "sync" : "async");
-	} else {
-		printf ("    PCI2: disabled\n");
-	}
-}
-#else
-	gur->devdisr |= MPC85xx_DEVDISR_PCI2; /* disable */
-#endif /* CONFIG_PCI2 */
-
-#ifdef CONFIG_PCIE1
-{
-	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE1_ADDR;
-	extern void fsl_pci_init(struct pci_controller *hose);
-	struct pci_controller *hose = &pcie1_hose;
-	int pcie_ep =  (host_agent == 0) || (host_agent == 2 ) || (host_agent == 3);
-
-	int pcie_configured  = io_sel >= 1;
-
-	if (pcie_configured && !(gur->devdisr & MPC85xx_DEVDISR_PCIE)){
-		printf ("\n    PCIE connected to slot as %s (base address %x)",
-			pcie_ep ? "End Point" : "Root Complex",
-			(uint)pci);
-
-		if (pci->pme_msg_det) {
-			pci->pme_msg_det = 0xffffffff;
-			debug (" with errors.  Clearing.  Now 0x%08x",pci->pme_msg_det);
-		}
-		printf ("\n");
-
-		/* inbound */
-		pci_set_region(hose->regions + 0,
-			       CFG_PCI_MEMORY_BUS,
-			       CFG_PCI_MEMORY_PHYS,
-			       CFG_PCI_MEMORY_SIZE,
-			       PCI_REGION_MEM | PCI_REGION_MEMORY);
-
-		/* outbound memory */
-		pci_set_region(hose->regions + 1,
-			       CFG_PCIE1_MEM_BASE,
-			       CFG_PCIE1_MEM_PHYS,
-			       CFG_PCIE1_MEM_SIZE,
-			       PCI_REGION_MEM);
-
-		/* outbound io */
-		pci_set_region(hose->regions + 2,
-			       CFG_PCIE1_IO_BASE,
-			       CFG_PCIE1_IO_PHYS,
-			       CFG_PCIE1_IO_SIZE,
-			       PCI_REGION_IO);
-
-		hose->region_count = 3;
-
-		hose->first_busno=first_free_busno;
-		pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
-
-		fsl_pci_init(hose);
-		printf ("PCIE on bus %d - %d\n",hose->first_busno,hose->last_busno);
-
-		first_free_busno=hose->last_busno+1;
-
-	} else {
-		printf ("    PCIE: disabled\n");
-	}
- }
-#else
-	gur->devdisr |= MPC85xx_DEVDISR_PCIE; /* disable */
-#endif
-
-}
-
-int last_stage_init(void)
-{
-	unsigned short temp;
-
-	/* Change the resistors for the PHY */
-	/* This is needed to get the RGMII working for the 1.3+
-	 * CDS cards */
-	if (get_board_version() ==  0x13) {
-		miiphy_write(CONFIG_TSEC1_NAME,
-				TSEC1_PHY_ADDR, 29, 18);
-
-		miiphy_read(CONFIG_TSEC1_NAME,
-				TSEC1_PHY_ADDR, 30, &temp);
-
-		temp = (temp & 0xf03f);
-		temp |= 2 << 9;		/* 36 ohm */
-		temp |= 2 << 6;		/* 39 ohm */
-
-		miiphy_write(CONFIG_TSEC1_NAME,
-				TSEC1_PHY_ADDR, 30, temp);
-
-		miiphy_write(CONFIG_TSEC1_NAME,
-				TSEC1_PHY_ADDR, 29, 3);
-
-		miiphy_write(CONFIG_TSEC1_NAME,
-				TSEC1_PHY_ADDR, 30, 0x8000);
-	}
-
-	return 0;
-}
-
-
-#if defined(CONFIG_OF_BOARD_SETUP)
-void
-ft_pci_setup(void *blob, bd_t *bd)
-{
-	int node, tmp[2];
-	const char *path;
-
-	node = fdt_path_offset(blob, "/aliases");
-	tmp[0] = 0;
-	if (node >= 0) {
-#ifdef CONFIG_PCI1
-		path = fdt_getprop(blob, node, "pci0", NULL);
-		if (path) {
-			tmp[1] = pci1_hose.last_busno - pci1_hose.first_busno;
-			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
-		}
-#endif
-#ifdef CONFIG_PCIE1
-		path = fdt_getprop(blob, node, "pci1", NULL);
-		if (path) {
-			tmp[1] = pcie1_hose.last_busno - pcie1_hose.first_busno;
-			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
-		}
-#endif
-	}
-}
-#endif
diff --git a/board/cds/mpc8548cds/u-boot.lds b/board/cds/mpc8548cds/u-boot.lds
deleted file mode 100644
index b19c481a96..0000000000
--- a/board/cds/mpc8548cds/u-boot.lds
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * Copyright 2004, 2007 Freescale Semiconductor.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  .resetvec 0xFFFFFFFC :
-  {
-    *(.resetvec)
-  } = 0xffff
-
-  .bootpg 0xFFFFF000 :
-  {
-    cpu/mpc85xx/start.o	(.bootpg)
-    board/cds/mpc8548cds/init.o (.bootpg)
-  } = 0xffff
-
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    cpu/mpc85xx/start.o	(.text)
-    board/cds/mpc8548cds/init.o (.text)
-    cpu/mpc85xx/traps.o (.text)
-    cpu/mpc85xx/interrupts.o (.text)
-    cpu/mpc85xx/cpu_init.o (.text)
-    cpu/mpc85xx/cpu.o (.text)
-    drivers/net/tsec.o (.text)
-    cpu/mpc85xx/speed.o (.text)
-    common/dlmalloc.o (.text)
-    lib_generic/crc32.o (.text)
-    lib_ppc/extable.o (.text)
-    lib_generic/zlib.o (.text)
-    *(.text)
-    *(.fixup)
-    *(.got1)
-   }
-    _etext = .;
-    PROVIDE (etext = .);
-    .rodata    :
-   {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
-  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/cds/mpc8555cds/Makefile b/board/cds/mpc8555cds/Makefile
deleted file mode 100644
index 7f53098850..0000000000
--- a/board/cds/mpc8555cds/Makefile
+++ /dev/null
@@ -1,60 +0,0 @@
-#
-# Copyright 2004 Freescale Semiconductor.
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-ifneq ($(OBJTREE),$(SRCTREE))
-$(shell mkdir -p $(obj)../common)
-endif
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	:= $(BOARD).o \
-	   ../common/cadmus.o \
-	   ../common/eeprom.o \
-	   ../common/ft_board.o \
-	   ../common/via.o
-
-SOBJS	:= init.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-clean:
-	rm -f $(OBJS) $(SOBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/cds/mpc8555cds/config.mk b/board/cds/mpc8555cds/config.mk
deleted file mode 100644
index 5dcaa774db..0000000000
--- a/board/cds/mpc8555cds/config.mk
+++ /dev/null
@@ -1,30 +0,0 @@
-#
-# Copyright 2004 Freescale Semiconductor.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# mpc8555cds board
-#
-TEXT_BASE = 0xfff80000
-
-PLATFORM_CPPFLAGS += -DCONFIG_E500=1
-PLATFORM_CPPFLAGS += -DCONFIG_MPC85xx=1
-PLATFORM_CPPFLAGS += -DCONFIG_MPC8555=1
diff --git a/board/cds/mpc8555cds/init.S b/board/cds/mpc8555cds/init.S
deleted file mode 100644
index 978bda5e4d..0000000000
--- a/board/cds/mpc8555cds/init.S
+++ /dev/null
@@ -1,255 +0,0 @@
-/*
- * Copyright 2004 Freescale Semiconductor.
- * Copyright 2002,2003, Motorola Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-#include <asm/cache.h>
-#include <asm/mmu.h>
-#include <config.h>
-#include <mpc85xx.h>
-
-
-/*
- * TLB0 and TLB1 Entries
- *
- * Out of reset, TLB1's Entry 0 maps the highest 4K for CCSRBAR.
- * However, CCSRBAR is then relocated to CFG_CCSRBAR right after
- * these TLB entries are established.
- *
- * The TLB entries for DDR are dynamically setup in spd_sdram()
- * and use TLB1 Entries 8 through 15 as needed according to the
- * size of DDR memory.
- *
- * MAS0: tlbsel, esel, nv
- * MAS1: valid, iprot, tid, ts, tsize
- * MAS2: epn, sharen, x0, x1, w, i, m, g, e
- * MAS3: rpn, u0-u3, ux, sx, uw, sw, ur, sr
- */
-
-#define	entry_start \
-	mflr	r1 	;	\
-	bl	0f 	;
-
-#define	entry_end \
-0:	mflr	r0	;	\
-	mtlr	r1	;	\
-	blr		;
-
-
-	.section	.bootpg, "ax"
-	.globl	tlb1_entry
-tlb1_entry:
-	entry_start
-
-	/*
-	 * Number of TLB0 and TLB1 entries in the following table
-	 */
-	.long 13
-
-#if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
-	/*
-	 * TLB0		4K	Non-cacheable, guarded
-	 * 0xff700000	4K	Initial CCSRBAR mapping
-	 *
-	 * This ends up at a TLB0 Index==0 entry, and must not collide
-	 * with other TLB0 Entries.
-	 */
-	.long TLB1_MAS0(0, 0, 0)
-	.long TLB1_MAS1(1, 0, 0, 0, 0)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR_DEFAULT), 0,0,0,0,0,1,0,1,0,1)
-#else
-#error("Update the number of table entries in tlb1_entry")
-#endif
-
-	/*
-	 * TLB0		16K	Cacheable, non-guarded
-	 * 0xd001_0000	16K	Temporary Global data for initialization
-	 *
-	 * Use four 4K TLB0 entries.  These entries must be cacheable
-	 * as they provide the bootstrap memory before the memory
-	 * controler and real memory have been configured.
-	 *
-	 * These entries end up at TLB0 Indicies 0x10, 0x14, 0x18 and 0x1c,
-	 * and must not collide with other TLB0 entries.
-	 */
-	.long TLB1_MAS0(0, 0, 0)
-	.long TLB1_MAS1(1, 0, 0, 0, 0)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR),
-			0,0,0,0,0,0,0,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR),
-			0,0,0,0,0,1,0,1,0,1)
-
-	.long TLB1_MAS0(0, 0, 0)
-	.long TLB1_MAS1(1, 0, 0, 0, 0)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 4 * 1024),
-			0,0,0,0,0,0,0,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 4 * 1024),
-			0,0,0,0,0,1,0,1,0,1)
-
-	.long TLB1_MAS0(0, 0, 0)
-	.long TLB1_MAS1(1, 0, 0, 0, 0)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 8 * 1024),
-			0,0,0,0,0,0,0,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 8 * 1024),
-			0,0,0,0,0,1,0,1,0,1)
-
-	.long TLB1_MAS0(0, 0, 0)
-	.long TLB1_MAS1(1, 0, 0, 0, 0)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 12 * 1024),
-			0,0,0,0,0,0,0,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 12 * 1024),
-			0,0,0,0,0,1,0,1,0,1)
-
-
-	/*
-	 * TLB 0:	16M	Non-cacheable, guarded
-	 * 0xff000000	16M	FLASH
-	 * Out of reset this entry is only 4K.
-	 */
-	.long TLB1_MAS0(1, 0, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_FLASH_BASE), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_FLASH_BASE), 0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 1:	256M	Non-cacheable, guarded
-	 * 0x80000000	256M	PCI1 MEM First half
-	 */
-	.long TLB1_MAS0(1, 1, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE), 0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 2:	256M	Non-cacheable, guarded
-	 * 0x90000000	256M	PCI1 MEM Second half
-	 */
-	.long TLB1_MAS0(1, 2, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE + 0x10000000),
-			0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE + 0x10000000),
-			0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 3:	256M	Non-cacheable, guarded
-	 * 0xa0000000	256M	PCI2 MEM First half
-	 */
-	.long TLB1_MAS0(1, 3, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_PCI2_MEM_BASE), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_PCI2_MEM_BASE), 0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 4:	256M	Non-cacheable, guarded
-	 * 0xb0000000	256M	PCI2 MEM Second half
-	 */
-	.long TLB1_MAS0(1, 4, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_PCI2_MEM_BASE + 0x10000000),
-			0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_PCI2_MEM_BASE + 0x10000000),
-			0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 5:	64M	Non-cacheable, guarded
-	 * 0xe000_0000	1M	CCSRBAR
-	 * 0xe200_0000	16M	PCI1 IO
-	 * 0xe300_0000	16M	PCI2 IO
-	 */
-	.long TLB1_MAS0(1, 5, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR), 0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 6:	64M	Cacheable, non-guarded
-	 * 0xf000_0000	64M	LBC SDRAM
-	 */
-	.long TLB1_MAS0(1, 6, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_LBC_SDRAM_BASE), 0,0,0,0,0,0,0,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_LBC_SDRAM_BASE), 0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 7:	1M	Non-cacheable, guarded
-	 * 0xf8000000	1M	CADMUS registers
-	 */
-	.long TLB1_MAS0(1, 7, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1M)
-	.long TLB1_MAS2(E500_TLB_EPN(CADMUS_BASE_ADDR), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CADMUS_BASE_ADDR), 0,0,0,0,0,1,0,1,0,1)
-
-	entry_end
-
-/*
- * LAW(Local Access Window) configuration:
- *
- * 0x0000_0000     0x7fff_ffff     DDR                     2G
- * 0x8000_0000     0x9fff_ffff     PCI1 MEM                512M
- * 0xa000_0000     0xbfff_ffff     PCI2 MEM                512M
- * 0xe000_0000     0xe000_ffff     CCSR                    1M
- * 0xe200_0000     0xe20f_ffff     PCI1 IO                 1M
- * 0xe210_0000     0xe21f_ffff     PCI2 IO                 1M
- * 0xf000_0000     0xf7ff_ffff     SDRAM                   128M
- * 0xf800_0000     0xf80f_ffff     NVRAM/CADMUS (*)        1M
- * 0xff00_0000     0xff7f_ffff     FLASH (2nd bank)        8M
- * 0xff80_0000     0xffff_ffff     FLASH (boot bank)       8M
- *
- * Notes:
- *    CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
- *    If flash is 8M at default position (last 8M), no LAW needed.
- *
- * The defines below are 1-off of the actual LAWAR0 usage.
- * So LAWAR3 define uses the LAWAR4 register in the ECM.
- */
-
-#define LAWBAR0 0
-#define LAWAR0  ((LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN)
-
-#define LAWBAR1 ((CFG_PCI1_MEM_BASE>>12) & 0xfffff)
-#define LAWAR1 	(LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M))
-
-#define LAWBAR2 ((CFG_PCI2_MEM_BASE>>12) & 0xfffff)
-#define LAWAR2 	(LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_512M))
-
-#define LAWBAR3 ((CFG_PCI1_IO_PHYS>>12) & 0xfffff)
-#define LAWAR3 	(LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_1M))
-
-#define LAWBAR4 ((CFG_PCI2_IO_PHYS>>12) & 0xfffff)
-#define LAWAR4 	(LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_1M))
-
-/* LBC window - maps 256M 0xf0000000 -> 0xffffffff */
-#define LAWBAR5 ((CFG_LBC_SDRAM_BASE>>12) & 0xfffff)
-#define LAWAR5 	(LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M))
-
-	.section .bootpg, "ax"
-	.globl	law_entry
-
-law_entry:
-	entry_start
-	.long 6
-	.long LAWBAR0,LAWAR0,LAWBAR1,LAWAR1,LAWBAR2,LAWAR2,LAWBAR3,LAWAR3
-	.long LAWBAR4,LAWAR4,LAWBAR5,LAWAR5
-	entry_end
diff --git a/board/cds/mpc8555cds/mpc8555cds.c b/board/cds/mpc8555cds/mpc8555cds.c
deleted file mode 100644
index 74c220d4fd..0000000000
--- a/board/cds/mpc8555cds/mpc8555cds.c
+++ /dev/null
@@ -1,534 +0,0 @@
-/*
- * Copyright 2004 Freescale Semiconductor.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <pci.h>
-#include <asm/processor.h>
-#include <asm/immap_85xx.h>
-#include <ioports.h>
-#include <spd.h>
-#include <libfdt.h>
-#include <fdt_support.h>
-
-#include "../common/cadmus.h"
-#include "../common/eeprom.h"
-#include "../common/via.h"
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-extern void ddr_enable_ecc(unsigned int dram_size);
-#endif
-
-extern long int spd_sdram(void);
-
-void local_bus_init(void);
-void sdram_init(void);
-
-/*
- * I/O Port configuration table
- *
- * if conf is 1, then that port pin will be configured at boot time
- * according to the five values podr/pdir/ppar/psor/pdat for that entry
- */
-
-const iop_conf_t iop_conf_tab[4][32] = {
-
-    /* Port A configuration */
-    {   /*            conf ppar psor pdir podr pdat */
-	/* PA31 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 TxENB */
-	/* PA30 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 TxClav   */
-	/* PA29 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 TxSOC  */
-	/* PA28 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 RxENB */
-	/* PA27 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 RxSOC */
-	/* PA26 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 RxClav */
-	/* PA25 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[0] */
-	/* PA24 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[1] */
-	/* PA23 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[2] */
-	/* PA22 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[3] */
-	/* PA21 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[4] */
-	/* PA20 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[5] */
-	/* PA19 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[6] */
-	/* PA18 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[7] */
-	/* PA17 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[7] */
-	/* PA16 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[6] */
-	/* PA15 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[5] */
-	/* PA14 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[4] */
-	/* PA13 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[3] */
-	/* PA12 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[2] */
-	/* PA11 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[1] */
-	/* PA10 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[0] */
-	/* PA9  */ {   0,   1,   1,   1,   0,   0   }, /* FCC1 L1TXD */
-	/* PA8  */ {   0,   1,   1,   0,   0,   0   }, /* FCC1 L1RXD */
-	/* PA7  */ {   0,   0,   0,   1,   0,   0   }, /* PA7 */
-	/* PA6  */ {   0,   1,   1,   1,   0,   0   }, /* TDM A1 L1RSYNC */
-	/* PA5  */ {   0,   0,   0,   1,   0,   0   }, /* PA5 */
-	/* PA4  */ {   0,   0,   0,   1,   0,   0   }, /* PA4 */
-	/* PA3  */ {   0,   0,   0,   1,   0,   0   }, /* PA3 */
-	/* PA2  */ {   0,   0,   0,   1,   0,   0   }, /* PA2 */
-	/* PA1  */ {   1,   0,   0,   0,   0,   0   }, /* FREERUN */
-	/* PA0  */ {   0,   0,   0,   1,   0,   0   }  /* PA0 */
-    },
-
-    /* Port B configuration */
-    {   /*            conf ppar psor pdir podr pdat */
-	/* PB31 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TX_ER */
-	/* PB30 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_DV */
-	/* PB29 */ {   1,   1,   1,   1,   0,   0   }, /* FCC2 MII TX_EN */
-	/* PB28 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_ER */
-	/* PB27 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII COL */
-	/* PB26 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII CRS */
-	/* PB25 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[3] */
-	/* PB24 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[2] */
-	/* PB23 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[1] */
-	/* PB22 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[0] */
-	/* PB21 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[0] */
-	/* PB20 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[1] */
-	/* PB19 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[2] */
-	/* PB18 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[3] */
-	/* PB17 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RX_DIV */
-	/* PB16 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RX_ERR */
-	/* PB15 */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TX_ERR */
-	/* PB14 */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TX_EN */
-	/* PB13 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:COL */
-	/* PB12 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:CRS */
-	/* PB11 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
-	/* PB10 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
-	/* PB9  */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
-	/* PB8  */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
-	/* PB7  */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
-	/* PB6  */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
-	/* PB5  */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
-	/* PB4  */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
-	/* PB3  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PB2  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PB1  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PB0  */ {   0,   0,   0,   0,   0,   0   }  /* pin doesn't exist */
-    },
-
-    /* Port C */
-    {   /*            conf ppar psor pdir podr pdat */
-	/* PC31 */ {   0,   0,   0,   1,   0,   0   }, /* PC31 */
-	/* PC30 */ {   0,   0,   0,   1,   0,   0   }, /* PC30 */
-	/* PC29 */ {   0,   1,   1,   0,   0,   0   }, /* SCC1 EN *CLSN */
-	/* PC28 */ {   0,   0,   0,   1,   0,   0   }, /* PC28 */
-	/* PC27 */ {   0,   0,   0,   1,   0,   0   }, /* UART Clock in */
-	/* PC26 */ {   0,   0,   0,   1,   0,   0   }, /* PC26 */
-	/* PC25 */ {   0,   0,   0,   1,   0,   0   }, /* PC25 */
-	/* PC24 */ {   0,   0,   0,   1,   0,   0   }, /* PC24 */
-	/* PC23 */ {   0,   1,   0,   1,   0,   0   }, /* ATMTFCLK */
-	/* PC22 */ {   0,   1,   0,   0,   0,   0   }, /* ATMRFCLK */
-	/* PC21 */ {   0,   1,   0,   0,   0,   0   }, /* SCC1 EN RXCLK */
-	/* PC20 */ {   0,   1,   0,   0,   0,   0   }, /* SCC1 EN TXCLK */
-	/* PC19 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_CLK CLK13 */
-	/* PC18 */ {   1,   1,   0,   0,   0,   0   }, /* FCC Tx Clock (CLK14) */
-	/* PC17 */ {   0,   0,   0,   1,   0,   0   }, /* PC17 */
-	/* PC16 */ {   0,   1,   0,   0,   0,   0   }, /* FCC Tx Clock (CLK16) */
-	/* PC15 */ {   1,   1,   0,   0,   0,   0   }, /* PC15 */
-	/* PC14 */ {   0,   1,   0,   0,   0,   0   }, /* SCC1 EN *CD */
-	/* PC13 */ {   0,   0,   0,   1,   0,   0   }, /* PC13 */
-	/* PC12 */ {   0,   1,   0,   1,   0,   0   }, /* PC12 */
-	/* PC11 */ {   0,   0,   0,   1,   0,   0   }, /* LXT971 transmit control */
-	/* PC10 */ {   1,   0,   0,   1,   0,   0   }, /* FETHMDC */
-	/* PC9  */ {   1,   0,   0,   0,   0,   0   }, /* FETHMDIO */
-	/* PC8  */ {   0,   0,   0,   1,   0,   0   }, /* PC8 */
-	/* PC7  */ {   0,   0,   0,   1,   0,   0   }, /* PC7 */
-	/* PC6  */ {   0,   0,   0,   1,   0,   0   }, /* PC6 */
-	/* PC5  */ {   0,   0,   0,   1,   0,   0   }, /* PC5 */
-	/* PC4  */ {   0,   0,   0,   1,   0,   0   }, /* PC4 */
-	/* PC3  */ {   0,   0,   0,   1,   0,   0   }, /* PC3 */
-	/* PC2  */ {   0,   0,   0,   1,   0,   1   }, /* ENET FDE */
-	/* PC1  */ {   0,   0,   0,   1,   0,   0   }, /* ENET DSQE */
-	/* PC0  */ {   0,   0,   0,   1,   0,   0   }, /* ENET LBK */
-    },
-
-    /* Port D */
-    {   /*            conf ppar psor pdir podr pdat */
-	/* PD31 */ {   1,   1,   0,   0,   0,   0   }, /* SCC1 EN RxD */
-	/* PD30 */ {   1,   1,   1,   1,   0,   0   }, /* SCC1 EN TxD */
-	/* PD29 */ {   1,   1,   0,   1,   0,   0   }, /* SCC1 EN TENA */
-	/* PD28 */ {   0,   1,   0,   0,   0,   0   }, /* PD28 */
-	/* PD27 */ {   0,   1,   1,   1,   0,   0   }, /* PD27 */
-	/* PD26 */ {   0,   0,   0,   1,   0,   0   }, /* PD26 */
-	/* PD25 */ {   0,   0,   0,   1,   0,   0   }, /* PD25 */
-	/* PD24 */ {   0,   0,   0,   1,   0,   0   }, /* PD24 */
-	/* PD23 */ {   0,   0,   0,   1,   0,   0   }, /* PD23 */
-	/* PD22 */ {   0,   0,   0,   1,   0,   0   }, /* PD22 */
-	/* PD21 */ {   0,   0,   0,   1,   0,   0   }, /* PD21 */
-	/* PD20 */ {   0,   0,   0,   1,   0,   0   }, /* PD20 */
-	/* PD19 */ {   0,   0,   0,   1,   0,   0   }, /* PD19 */
-	/* PD18 */ {   0,   0,   0,   1,   0,   0   }, /* PD18 */
-	/* PD17 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXPRTY */
-	/* PD16 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXPRTY */
-	/* PD15 */ {   0,   1,   1,   0,   1,   0   }, /* I2C SDA */
-	/* PD14 */ {   0,   0,   0,   1,   0,   0   }, /* LED */
-	/* PD13 */ {   0,   0,   0,   0,   0,   0   }, /* PD13 */
-	/* PD12 */ {   0,   0,   0,   0,   0,   0   }, /* PD12 */
-	/* PD11 */ {   0,   0,   0,   0,   0,   0   }, /* PD11 */
-	/* PD10 */ {   0,   0,   0,   0,   0,   0   }, /* PD10 */
-	/* PD9  */ {   0,   1,   0,   1,   0,   0   }, /* SMC1 TXD */
-	/* PD8  */ {   0,   1,   0,   0,   0,   0   }, /* SMC1 RXD */
-	/* PD7  */ {   0,   0,   0,   1,   0,   1   }, /* PD7 */
-	/* PD6  */ {   0,   0,   0,   1,   0,   1   }, /* PD6 */
-	/* PD5  */ {   0,   0,   0,   1,   0,   1   }, /* PD5 */
-	/* PD4  */ {   0,   0,   0,   1,   0,   1   }, /* PD4 */
-	/* PD3  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PD2  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PD1  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PD0  */ {   0,   0,   0,   0,   0,   0   }  /* pin doesn't exist */
-    }
-};
-
-int board_early_init_f (void)
-{
-	return 0;
-}
-
-int checkboard (void)
-{
-	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
-
-	/* PCI slot in USER bits CSR[6:7] by convention. */
-	uint pci_slot = get_pci_slot ();
-
-	uint pci_dual = get_pci_dual ();	/* PCI DUAL in CM_PCI[3] */
-	uint pci1_32 = gur->pordevsr & 0x10000;	/* PORDEVSR[15] */
-	uint pci1_clk_sel = gur->porpllsr & 0x8000;	/* PORPLLSR[16] */
-	uint pci2_clk_sel = gur->porpllsr & 0x4000;	/* PORPLLSR[17] */
-
-	uint pci1_speed = get_clock_freq ();	/* PCI PSPEED in [4:5] */
-
-	uint cpu_board_rev = get_cpu_board_revision ();
-
-	printf ("Board: CDS Version 0x%02x, PCI Slot %d\n",
-		get_board_version (), pci_slot);
-
-	printf ("CPU Board Revision %d.%d (0x%04x)\n",
-		MPC85XX_CPU_BOARD_MAJOR (cpu_board_rev),
-		MPC85XX_CPU_BOARD_MINOR (cpu_board_rev), cpu_board_rev);
-
-	printf ("    PCI1: %d bit, %s MHz, %s\n",
-		(pci1_32) ? 32 : 64,
-		(pci1_speed == 33000000) ? "33" :
-		(pci1_speed == 66000000) ? "66" : "unknown",
-		pci1_clk_sel ? "sync" : "async");
-
-	if (pci_dual) {
-		printf ("    PCI2: 32 bit, 66 MHz, %s\n",
-			pci2_clk_sel ? "sync" : "async");
-	} else {
-		printf ("    PCI2: disabled\n");
-	}
-
-	/*
-	 * Initialize local bus.
-	 */
-	local_bus_init ();
-
-	return 0;
-}
-
-long int
-initdram(int board_type)
-{
-	long dram_size = 0;
-
-	puts("Initializing\n");
-
-#if defined(CONFIG_DDR_DLL)
-	{
-		/*
-		 * Work around to stabilize DDR DLL MSYNC_IN.
-		 * Errata DDR9 seems to have been fixed.
-		 * This is now the workaround for Errata DDR11:
-		 *    Override DLL = 1, Course Adj = 1, Tap Select = 0
-		 */
-
-		volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
-
-		gur->ddrdllcr = 0x81000000;
-		asm("sync;isync;msync");
-		udelay(200);
-	}
-#endif
-	dram_size = spd_sdram();
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-	/*
-	 * Initialize and enable DDR ECC.
-	 */
-	ddr_enable_ecc(dram_size);
-#endif
-	/*
-	 * SDRAM Initialization
-	 */
-	sdram_init();
-
-	puts("    DDR: ");
-	return dram_size;
-}
-
-/*
- * Initialize Local Bus
- */
-void
-local_bus_init(void)
-{
-	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
-	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
-
-	uint clkdiv;
-	uint lbc_hz;
-	sys_info_t sysinfo;
-	uint temp_lbcdll;
-
-	/*
-	 * Errata LBC11.
-	 * Fix Local Bus clock glitch when DLL is enabled.
-	 *
-	 * If localbus freq is < 66Mhz, DLL bypass mode must be used.
-	 * If localbus freq is > 133Mhz, DLL can be safely enabled.
-	 * Between 66 and 133, the DLL is enabled with an override workaround.
-	 */
-
-	get_sys_info(&sysinfo);
-	clkdiv = lbc->lcrr & 0x0f;
-	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
-
-	if (lbc_hz < 66) {
-		lbc->lcrr |= 0x80000000;	/* DLL Bypass */
-
-	} else if (lbc_hz >= 133) {
-		lbc->lcrr &= (~0x80000000);		/* DLL Enabled */
-
-	} else {
-		lbc->lcrr &= (~0x8000000);	/* DLL Enabled */
-		udelay(200);
-
-		/*
-		 * Sample LBC DLL ctrl reg, upshift it to set the
-		 * override bits.
-		 */
-		temp_lbcdll = gur->lbcdllcr;
-		gur->lbcdllcr = (((temp_lbcdll & 0xff) << 16) | 0x80000000);
-		asm("sync;isync;msync");
-	}
-}
-
-/*
- * Initialize SDRAM memory on the Local Bus.
- */
-void
-sdram_init(void)
-{
-#if defined(CFG_OR2_PRELIM) && defined(CFG_BR2_PRELIM)
-
-	uint idx;
-	volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
-	uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE;
-	uint cpu_board_rev;
-	uint lsdmr_common;
-
-	puts("    SDRAM: ");
-
-	print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
-
-	/*
-	 * Setup SDRAM Base and Option Registers
-	 */
-	lbc->or2 = CFG_OR2_PRELIM;
-	asm("msync");
-
-	lbc->br2 = CFG_BR2_PRELIM;
-	asm("msync");
-
-	lbc->lbcr = CFG_LBC_LBCR;
-	asm("msync");
-
-	lbc->lsrt = CFG_LBC_LSRT;
-	lbc->mrtpr = CFG_LBC_MRTPR;
-	asm("msync");
-
-	/*
-	 * Determine which address lines to use baed on CPU board rev.
-	 */
-	cpu_board_rev = get_cpu_board_revision();
-	lsdmr_common = CFG_LBC_LSDMR_COMMON;
-	if (cpu_board_rev == MPC85XX_CPU_BOARD_REV_1_0) {
-		lsdmr_common |= CFG_LBC_LSDMR_BSMA1617;
-	} else if (cpu_board_rev == MPC85XX_CPU_BOARD_REV_1_1) {
-		lsdmr_common |= CFG_LBC_LSDMR_BSMA1516;
-	} else {
-		/*
-		 * Assume something unable to identify itself is
-		 * really old, and likely has lines 16/17 mapped.
-		 */
-		lsdmr_common |= CFG_LBC_LSDMR_BSMA1617;
-	}
-
-	/*
-	 * Issue PRECHARGE ALL command.
-	 */
-	lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_PCHALL;
-	asm("sync;msync");
-	*sdram_addr = 0xff;
-	ppcDcbf((unsigned long) sdram_addr);
-	udelay(100);
-
-	/*
-	 * Issue 8 AUTO REFRESH commands.
-	 */
-	for (idx = 0; idx < 8; idx++) {
-		lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_ARFRSH;
-		asm("sync;msync");
-		*sdram_addr = 0xff;
-		ppcDcbf((unsigned long) sdram_addr);
-		udelay(100);
-	}
-
-	/*
-	 * Issue 8 MODE-set command.
-	 */
-	lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_MRW;
-	asm("sync;msync");
-	*sdram_addr = 0xff;
-	ppcDcbf((unsigned long) sdram_addr);
-	udelay(100);
-
-	/*
-	 * Issue NORMAL OP command.
-	 */
-	lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_NORMAL;
-	asm("sync;msync");
-	*sdram_addr = 0xff;
-	ppcDcbf((unsigned long) sdram_addr);
-	udelay(200);    /* Overkill. Must wait > 200 bus cycles */
-
-#endif	/* enable SDRAM init */
-}
-
-#if defined(CFG_DRAM_TEST)
-int
-testdram(void)
-{
-	uint *pstart = (uint *) CFG_MEMTEST_START;
-	uint *pend = (uint *) CFG_MEMTEST_END;
-	uint *p;
-
-	printf("Testing DRAM from 0x%08x to 0x%08x\n",
-	       CFG_MEMTEST_START,
-	       CFG_MEMTEST_END);
-
-	printf("DRAM test phase 1:\n");
-	for (p = pstart; p < pend; p++)
-		*p = 0xaaaaaaaa;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0xaaaaaaaa) {
-			printf ("DRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-
-	printf("DRAM test phase 2:\n");
-	for (p = pstart; p < pend; p++)
-		*p = 0x55555555;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0x55555555) {
-			printf ("DRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-
-	printf("DRAM test passed.\n");
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_PCI
-/* For some reason the Tundra PCI bridge shows up on itself as a
- * different device.  Work around that by refusing to configure it
- */
-void dummy_func(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *tab) { }
-
-static struct pci_config_table pci_mpc85xxcds_config_table[] = {
-	{0x10e3, 0x0513, PCI_ANY_ID, 1, 3, PCI_ANY_ID, dummy_func, {0,0,0}},
-	{0x1106, 0x0686, PCI_ANY_ID, 1, VIA_ID, 0, mpc85xx_config_via, {0,0,0}},
-	{0x1106, 0x0571, PCI_ANY_ID, 1, VIA_ID, 1,
-		mpc85xx_config_via_usbide, {0,0,0}},
-	{0x1105, 0x3038, PCI_ANY_ID, 1, VIA_ID, 2,
-		mpc85xx_config_via_usb, {0,0,0}},
-	{0x1106, 0x3038, PCI_ANY_ID, 1, VIA_ID, 3,
-		mpc85xx_config_via_usb2, {0,0,0}},
-	{0x1106, 0x3058, PCI_ANY_ID, 1, VIA_ID, 5,
-		mpc85xx_config_via_power, {0,0,0}},
-	{0x1106, 0x3068, PCI_ANY_ID, 1, VIA_ID, 6,
-		mpc85xx_config_via_ac97, {0,0,0}},
-	{},
-};
-
-
-static struct pci_controller hose[] = {
-	{
-	config_table: pci_mpc85xxcds_config_table,
-	},
-#ifdef CONFIG_MPC85XX_PCI2
-	{},
-#endif
-};
-
-#endif
-
-void
-pci_init_board(void)
-{
-#ifdef CONFIG_PCI
-	pci_mpc85xx_init(hose);
-#endif
-}
-
-#if defined(CONFIG_OF_BOARD_SETUP)
-void
-ft_pci_setup(void *blob, bd_t *bd)
-{
-	int node, tmp[2];
-	const char *path;
-
-	node = fdt_path_offset(blob, "/aliases");
-	tmp[0] = 0;
-	if (node >= 0) {
-#ifdef CONFIG_PCI1
-		path = fdt_getprop(blob, node, "pci0", NULL);
-		if (path) {
-			tmp[1] = hose[0].last_busno - hose[0].first_busno;
-			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
-		}
-#endif
-#ifdef CONFIG_MPC85XX_PCI2
-		path = fdt_getprop(blob, node, "pci1", NULL);
-		if (path) {
-			tmp[1] = hose[1].last_busno - hose[1].first_busno;
-			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
-		}
-#endif
-	}
-}
-#endif
diff --git a/board/cds/mpc8555cds/u-boot.lds b/board/cds/mpc8555cds/u-boot.lds
deleted file mode 100644
index de0923a0d8..0000000000
--- a/board/cds/mpc8555cds/u-boot.lds
+++ /dev/null
@@ -1,150 +0,0 @@
-/*
- * Copyright 2004 Freescale Semiconductor.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  .resetvec 0xFFFFFFFC :
-  {
-    *(.resetvec)
-  } = 0xffff
-
-  .bootpg 0xFFFFF000 :
-  {
-    cpu/mpc85xx/start.o	(.bootpg)
-    board/cds/mpc8555cds/init.o (.bootpg)
-  } = 0xffff
-
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    cpu/mpc85xx/start.o	(.text)
-    board/cds/mpc8555cds/init.o (.text)
-    cpu/mpc85xx/traps.o (.text)
-    cpu/mpc85xx/interrupts.o (.text)
-    cpu/mpc85xx/cpu_init.o (.text)
-    cpu/mpc85xx/cpu.o (.text)
-    drivers/net/tsec.o (.text)
-    cpu/mpc85xx/speed.o (.text)
-    cpu/mpc85xx/pci.o (.text)
-    common/dlmalloc.o (.text)
-    lib_generic/crc32.o (.text)
-    lib_ppc/extable.o (.text)
-    lib_generic/zlib.o (.text)
-    *(.text)
-    *(.fixup)
-    *(.got1)
-   }
-    _etext = .;
-    PROVIDE (etext = .);
-    .rodata    :
-   {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
-  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}