diff options
| author | Hans de Goede <hdegoede@redhat.com> | 2014-11-14 16:27:07 +0100 |
|---|---|---|
| committer | Hans de Goede <hdegoede@redhat.com> | 2014-11-25 13:38:46 +0100 |
| commit | f222c73afaaa2430f700f56e7f3b6d8889b96e8c (patch) | |
| tree | b0999fe6d70c2da114e8c36fd9623557bd59f86b /board/boundary/nitrogen6x/800mhz_4x256mx16.cfg | |
| parent | 86b4909340a272a1a040db61565f639d845b170f (diff) | |
| download | blackbird-obmc-uboot-f222c73afaaa2430f700f56e7f3b6d8889b96e8c.tar.gz blackbird-obmc-uboot-f222c73afaaa2430f700f56e7f3b6d8889b96e8c.zip | |
sunxi: ahci: Add a delay after enabling target power
If the target power is connected through a gpio, then give the target some
time to power up before continuing with ahci / sata probing, this avoids
link timeouts, without penalizing other boards where there is no target
power gpio.
Why 500 ms ? I started with 200, that was not enough, then I went to 500 which
worked, lowering it to 350 broke things again, so 500 seems the minimum my
vertex2 needs to be ready to get probed.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
Diffstat (limited to 'board/boundary/nitrogen6x/800mhz_4x256mx16.cfg')
0 files changed, 0 insertions, 0 deletions
