socfpga: Adding Clock Manager driver

Clock Manager driver will be called to reconfigure all the
clocks setting based on user input. The input are passed to
Preloader through handoff files

Signed-off-by: Chin Liang See <clsee@altera.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Tom Rini <trini@ti.com>
Cc: Wolfgang Denk <wd@denx.de>
CC: Pavel Machek <pavel@denx.de>
Cc: Dinh Nguyen <dinguyen@altera.com>
Acked-by: Pavel Machek <pavel@denx.de>

1 files changed, 118 insertions, 0 deletions

diff --git a/board/altera/socfpga/pll_config.h b/board/altera/socfpga/pll_config.h
new file mode 100644
index 0000000000..9bd044230b
--- /dev/null
+++ b/board/altera/socfpga/pll_config.h
@@ -0,0 +1,118 @@
+/*
+ * Copyright Altera Corporation (C) 2012-2014. All rights reserved
+ *
+ * SPDX-License-Identifier:    BSD-3-Clause
+ */
+
+/* This file is generated by Preloader Generator */
+
+#ifndef _PRELOADER_PLL_CONFIG_H_
+#define _PRELOADER_PLL_CONFIG_H_
+
+/* PLL configuration data */
+/* Main PLL */
+#define CONFIG_HPS_MAINPLLGRP_VCO_DENOM			(0)
+#define CONFIG_HPS_MAINPLLGRP_VCO_NUMER			(63)
+#define CONFIG_HPS_MAINPLLGRP_MPUCLK_CNT		(0)
+#define CONFIG_HPS_MAINPLLGRP_MAINCLK_CNT		(0)
+#define CONFIG_HPS_MAINPLLGRP_DBGATCLK_CNT		(0)
+#define CONFIG_HPS_MAINPLLGRP_MAINQSPICLK_CNT		(3)
+#define CONFIG_HPS_MAINPLLGRP_MAINNANDSDMMCCLK_CNT	(3)
+#define CONFIG_HPS_MAINPLLGRP_CFGS2FUSER0CLK_CNT	(12)
+#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L3MPCLK		(1)
+#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L3SPCLK		(1)
+#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L4MPCLK		(1)
+#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L4SPCLK		(1)
+#define CONFIG_HPS_MAINPLLGRP_DBGDIV_DBGATCLK		(0)
+#define CONFIG_HPS_MAINPLLGRP_DBGDIV_DBGCLK		(1)
+#define CONFIG_HPS_MAINPLLGRP_TRACEDIV_TRACECLK		(0)
+/*
+ * To tell where is the clock source:
+ * 0 = MAINPLL
+ * 1 = PERIPHPLL
+ */
+#define CONFIG_HPS_MAINPLLGRP_L4SRC_L4MP		(1)
+#define CONFIG_HPS_MAINPLLGRP_L4SRC_L4SP		(1)
+
+/* Peripheral PLL */
+#define CONFIG_HPS_PERPLLGRP_VCO_DENOM			(1)
+#define CONFIG_HPS_PERPLLGRP_VCO_NUMER			(79)
+/*
+ * To tell where is the VCOs source:
+ * 0 = EOSC1
+ * 1 = EOSC2
+ * 2 = F2S
+ */
+#define CONFIG_HPS_PERPLLGRP_VCO_PSRC			(0)
+#define CONFIG_HPS_PERPLLGRP_EMAC0CLK_CNT		(3)
+#define CONFIG_HPS_PERPLLGRP_EMAC1CLK_CNT		(3)
+#define CONFIG_HPS_PERPLLGRP_PERQSPICLK_CNT		(1)
+#define CONFIG_HPS_PERPLLGRP_PERNANDSDMMCCLK_CNT	(4)
+#define CONFIG_HPS_PERPLLGRP_PERBASECLK_CNT		(4)
+#define CONFIG_HPS_PERPLLGRP_S2FUSER1CLK_CNT		(9)
+#define CONFIG_HPS_PERPLLGRP_DIV_USBCLK			(0)
+#define CONFIG_HPS_PERPLLGRP_DIV_SPIMCLK		(0)
+#define CONFIG_HPS_PERPLLGRP_DIV_CAN0CLK		(1)
+#define CONFIG_HPS_PERPLLGRP_DIV_CAN1CLK		(1)
+#define CONFIG_HPS_PERPLLGRP_GPIODIV_GPIODBCLK		(6249)
+/*
+ * To tell where is the clock source:
+ * 0 = F2S_PERIPH_REF_CLK
+ * 1 = MAIN_CLK
+ * 2 = PERIPH_CLK
+ */
+#define CONFIG_HPS_PERPLLGRP_SRC_SDMMC			(2)
+#define CONFIG_HPS_PERPLLGRP_SRC_NAND			(2)
+#define CONFIG_HPS_PERPLLGRP_SRC_QSPI			(1)
+
+/* SDRAM PLL */
+#ifdef CONFIG_SOCFPGA_ARRIA5
+/* Arria V SDRAM will run at 533MHz while Cyclone V still at 400MHz
+ * This if..else... is not required if generated by tools */
+#define CONFIG_HPS_SDRPLLGRP_VCO_DENOM			(2)
+#define CONFIG_HPS_SDRPLLGRP_VCO_NUMER			(127)
+#else
+#define CONFIG_HPS_SDRPLLGRP_VCO_DENOM			(0)
+#define CONFIG_HPS_SDRPLLGRP_VCO_NUMER			(31)
+#endif /* CONFIG_SOCFPGA_ARRIA5 */
+
+/*
+ * To tell where is the VCOs source:
+ * 0 = EOSC1
+ * 1 = EOSC2
+ * 2 = F2S
+ */
+#define CONFIG_HPS_SDRPLLGRP_VCO_SSRC			(0)
+#define CONFIG_HPS_SDRPLLGRP_DDRDQSCLK_CNT		(1)
+#define CONFIG_HPS_SDRPLLGRP_DDRDQSCLK_PHASE		(0)
+#define CONFIG_HPS_SDRPLLGRP_DDR2XDQSCLK_CNT		(0)
+#define CONFIG_HPS_SDRPLLGRP_DDR2XDQSCLK_PHASE		(0)
+#define CONFIG_HPS_SDRPLLGRP_DDRDQCLK_CNT		(1)
+#define CONFIG_HPS_SDRPLLGRP_DDRDQCLK_PHASE		(4)
+#define CONFIG_HPS_SDRPLLGRP_S2FUSER2CLK_CNT		(5)
+#define CONFIG_HPS_SDRPLLGRP_S2FUSER2CLK_PHASE		(0)
+
+/* Info for driver */
+#define CONFIG_HPS_CLK_OSC1_HZ			(25000000)
+#define CONFIG_HPS_CLK_MAINVCO_HZ		(1600000000)
+#define CONFIG_HPS_CLK_PERVCO_HZ		(1000000000)
+#ifdef CONFIG_SOCFPGA_ARRIA5
+/* The if..else... is not required if generated by tools */
+#define CONFIG_HPS_CLK_SDRVCO_HZ		(1066000000)
+#else
+#define CONFIG_HPS_CLK_SDRVCO_HZ		(800000000)
+#endif
+#define CONFIG_HPS_CLK_EMAC0_HZ			(250000000)
+#define CONFIG_HPS_CLK_EMAC1_HZ			(250000000)
+#define CONFIG_HPS_CLK_USBCLK_HZ		(200000000)
+#define CONFIG_HPS_CLK_NAND_HZ			(50000000)
+#define CONFIG_HPS_CLK_SDMMC_HZ			(200000000)
+#define CONFIG_HPS_CLK_QSPI_HZ			(400000000)
+#define CONFIG_HPS_CLK_SPIM_HZ			(200000000)
+#define CONFIG_HPS_CLK_CAN0_HZ			(100000000)
+#define CONFIG_HPS_CLK_CAN1_HZ			(100000000)
+#define CONFIG_HPS_CLK_GPIODB_HZ		(32000)
+#define CONFIG_HPS_CLK_L4_MP_HZ			(100000000)
+#define CONFIG_HPS_CLK_L4_SP_HZ			(100000000)
+
+#endif /* _PRELOADER_PLL_CONFIG_H_ */