arm: Remove OMAP2420H4 and all omap24xx support

The omap2420H4 was the only mainline omap24xx board.  Prior to being
fixed by Jon Hunter in time for v2013.04 it had been functionally broken
for a very long time.  Remove this board as there's not been interest in
it in U-Boot for quite a long time.

Signed-off-by: Tom Rini <trini@ti.com>

10 files changed, 1 insertions, 951 deletions

diff --git a/arch/arm/cpu/arm1136/start.S b/arch/arm/cpu/arm1136/start.S
index edf249d902..a7e0c28c90 100644
--- a/arch/arm/cpu/arm1136/start.S
+++ b/arch/arm/cpu/arm1136/start.S
@@ -142,24 +142,6 @@ reset:
 	orr	r0,r0,#0xd3
 	msr	cpsr,r0
 
-#ifdef CONFIG_OMAP2420H4
-       /* Copy vectors to mask ROM indirect addr */
-	adr	r0, _start		/* r0 <- current position of code   */
-		add     r0, r0, #4				/* skip reset vector			*/
-	mov	r2, #64			/* r2 <- size to copy  */
-	add	r2, r0, r2		/* r2 <- source end address	    */
-	mov	r1, #SRAM_OFFSET0	  /* build vect addr */
-	mov	r3, #SRAM_OFFSET1
-	add	r1, r1, r3
-	mov	r3, #SRAM_OFFSET2
-	add	r1, r1, r3
-next:
-	ldmia	r0!, {r3-r10}		/* copy from source address [r0]    */
-	stmia	r1!, {r3-r10}		/* copy to   target address [r1]    */
-	cmp	r0, r2			/* until source end address [r2]    */
-	bne	next			/* loop until equal */
-	bl	cpy_clk_code		/* put dpll adjust code behind vectors */
-#endif
 	/* the mask ROM code should have PLL and others stable */
 #ifndef CONFIG_SKIP_LOWLEVEL_INIT
 	bl  cpu_init_crit
diff --git a/arch/arm/include/asm/arch-omap24xx/bits.h b/arch/arm/include/asm/arch-omap24xx/bits.h
deleted file mode 100644
index 8522335bfc..0000000000
--- a/arch/arm/include/asm/arch-omap24xx/bits.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/* bits.h
- * Copyright (c) 2004 Texas Instruments
- *
- * This package is free software;  you can redistribute it and/or
- * modify it under the terms of the license found in the file
- * named COPYING that should have accompanied this file.
- *
- * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-#ifndef __bits_h
-#define __bits_h 1
-
-#define BIT0  (1<<0)
-#define BIT1  (1<<1)
-#define BIT2  (1<<2)
-#define BIT3  (1<<3)
-#define BIT4  (1<<4)
-#define BIT5  (1<<5)
-#define BIT6  (1<<6)
-#define BIT7  (1<<7)
-#define BIT8  (1<<8)
-#define BIT9  (1<<9)
-#define BIT10 (1<<10)
-#define BIT11 (1<<11)
-#define BIT12 (1<<12)
-#define BIT13 (1<<13)
-#define BIT14 (1<<14)
-#define BIT15 (1<<15)
-#define BIT16 (1<<16)
-#define BIT17 (1<<17)
-#define BIT18 (1<<18)
-#define BIT19 (1<<19)
-#define BIT20 (1<<20)
-#define BIT21 (1<<21)
-#define BIT22 (1<<22)
-#define BIT23 (1<<23)
-#define BIT24 (1<<24)
-#define BIT25 (1<<25)
-#define BIT26 (1<<26)
-#define BIT27 (1<<27)
-#define BIT28 (1<<28)
-#define BIT29 (1<<29)
-#define BIT30 (1<<30)
-#define BIT31 (1<<31)
-
-#endif
diff --git a/arch/arm/include/asm/arch-omap24xx/clock.h b/arch/arm/include/asm/arch-omap24xx/clock.h
deleted file mode 100644
index 2e92569a9c..0000000000
--- a/arch/arm/include/asm/arch-omap24xx/clock.h
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
-  */
-#ifndef _OMAP24XX_CLOCKS_H_
-#define _OMAP24XX_CLOCKS_H_
-
-#define COMMIT_DIVIDERS  0x1
-
-#define MODE_BYPASS_FAST 0x2
-#define APLL_LOCK        0xc
-#ifdef CONFIG_APTIX
-#define DPLL_LOCK        0x1   /* stay in bypass mode */
-#else
-#define DPLL_LOCK        0x3   /* DPLL lock */
-#endif
-
-/****************************************************************************;
-; PRCM Scheme II
-;
-; Enable clocks and DPLL for:
-;  DPLL=300,	DPLLout=600	M=1,N=50   CM_CLKSEL1_PLL[21:8]  12/2*50
-;  Core=600	(core domain)   DPLLx2     CM_CLKSEL2_PLL[1:0]
-;  MPUF=300	(mpu domain)    2          CM_CLKSEL_MPU[4:0]
-;  DSPF=200    (dsp domain)    3          CM_CLKSEL_DSP[4:0]
-;  DSPI=100                    6          CM_CLKSEL_DSP[6:5]
-;  DSP_S          bypass	               CM_CLKSEL_DSP[7]
-;  IVAF=200    (dsp domain)    3          CM_CLKSEL_DSP[12:8]
-;  IVAF=100        auto
-;  IVAI            auto
-;  IVA_MPU         auto
-;  IVA_S          bypass                  CM_CLKSEL_DSP[13]
-;  GFXF=50      (gfx domain)	12         CM_CLKSEL_FGX[2:0]
-;  SSI_SSRF=200                 3         CM_CLKSEL1_CORE[24:20]
-;  SSI_SSTF=100     auto
-;  L3=100Mhz (sdram)            6         CM_CLKSEL1_CORE[4:0]
-;  L4=100Mhz                    6
-;  C_L4_USB=50                 12         CM_CLKSEL1_CORE[6:5]
-***************************************************************************/
-#define II_DPLL_OUT_X2   0x2    /* x2 core out */
-#define II_MPU_DIV       0x2    /* mpu = core/2 */
-#define II_DSP_DIV       0x343  /* dsp & iva divider */
-#define II_GFX_DIV       0x2
-#define II_BUS_DIV       0x04601026
-#define II_DPLL_300      0x01832100
-
-/****************************************************************************;
-; PRCM Scheme III
-;
-; Enable clocks and DPLL for:
-;  DPLL=266,	DPLLout=532	M=5+1,N=133 CM_CLKSEL1_PLL[21:8]  12/6*133=266
-;  Core=532	(core domain)   DPLLx2      CM_CLKSEL2_PLL[1:0]
-;  MPUF=266	(mpu domain)    /2          CM_CLKSEL_MPU[4:0]
-;  DSPF=177.3     (dsp domain)  /3          CM_CLKSEL_DSP[4:0]
-;  DSPI=88.67                   /6          CM_CLKSEL_DSP[6:5]
-;  DSP_S         ACTIVATED	            CM_CLKSEL_DSP[7]
-;  IVAF=88.67    (dsp domain)   /3          CM_CLKSEL_DSP[12:8]
-;  IVAF=88.67        auto
-;  IVAI            auto
-;  IVA_MPU         auto
-;  IVA_S         ACTIVATED                  CM_CLKSEL_DSP[13]
-;  GFXF=66.5      (gfx domain)	/8          CM_CLKSEL_FGX[2:0]:
-;  SSI_SSRF=177.3               /3          CM_CLKSEL1_CORE[24:20]
-;  SSI_SSTF=88.67     auto
-;  L3=133Mhz (sdram)            /4          CM_CLKSEL1_CORE[4:0]
-;  L4=66.5Mhz                   /8
-;  C_L4_USB=33.25               /16         CM_CLKSEL1_CORE[6:5]
-***************************************************************************/
-#define III_DPLL_OUT_X2   0x2    /* x2 core out */
-#define III_MPU_DIV       0x2    /* mpu = core/2 */
-#define III_DSP_DIV       0x23C3 /* dsp & iva divider sych enabled*/
-#define III_GFX_DIV       0x2
-#define III_BUS_DIV       0x08301044
-#define III_DPLL_266      0x01885500
-
-/* set defaults for boot up */
-#ifdef PRCM_CONFIG_II
-# define DPLL_OUT         II_DPLL_OUT_X2
-# define MPU_DIV          II_MPU_DIV
-# define DSP_DIV          II_DSP_DIV
-# define GFX_DIV          II_GFX_DIV
-# define BUS_DIV          II_BUS_DIV
-# define DPLL_VAL         II_DPLL_300
-#elif PRCM_CONFIG_III
-# define DPLL_OUT         III_DPLL_OUT_X2
-# define MPU_DIV          III_MPU_DIV
-# define DSP_DIV          III_DSP_DIV
-# define GFX_DIV          III_GFX_DIV
-# define BUS_DIV          III_BUS_DIV
-# define DPLL_VAL         III_DPLL_266
-#endif
-
-/* lock delay time out */
-#define LDELAY           12000000
-
-#endif
diff --git a/arch/arm/include/asm/arch-omap24xx/i2c.h b/arch/arm/include/asm/arch-omap24xx/i2c.h
deleted file mode 100644
index 6f645192a7..0000000000
--- a/arch/arm/include/asm/arch-omap24xx/i2c.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#ifndef _OMAP24XX_I2C_H_
-#define _OMAP24XX_I2C_H_
-
-#define I2C_BASE1		0x48070000
-#define I2C_BASE2               0x48072000 /* nothing hooked up on h4 */
-
-#define I2C_DEFAULT_BASE	I2C_BASE1
-
-struct i2c {
-	unsigned short rev;	/* 0x00 */
-	unsigned short res1;
-	unsigned short ie;	/* 0x04 */
-	unsigned short res2;
-	unsigned short stat;	/* 0x08 */
-	unsigned short res3;
-	unsigned short iv;	/* 0x0C */
-	unsigned short res4;
-	unsigned short syss;	/* 0x10 */
-	unsigned short res4p1;
-	unsigned short buf;	/* 0x14 */
-	unsigned short res5;
-	unsigned short cnt;	/* 0x18 */
-	unsigned short res6;
-	unsigned short data;	/* 0x1C */
-	unsigned short res7;
-	unsigned short sysc;	/* 0x20 */
-	unsigned short res8;
-	unsigned short con;	/* 0x24 */
-	unsigned short res9;
-	unsigned short oa;	/* 0x28 */
-	unsigned short res10;
-	unsigned short sa;	/* 0x2C */
-	unsigned short res11;
-	unsigned short psc;	/* 0x30 */
-	unsigned short res12;
-	unsigned short scll;	/* 0x34 */
-	unsigned short res13;
-	unsigned short sclh;	/* 0x38 */
-	unsigned short res14;
-	unsigned short systest;	/* 0x3c */
-	unsigned short res15;
-};
-
-#define I2C_BUS_MAX	2
-
-#endif
diff --git a/arch/arm/include/asm/arch-omap24xx/mem.h b/arch/arm/include/asm/arch-omap24xx/mem.h
deleted file mode 100644
index 42e8ab2bce..0000000000
--- a/arch/arm/include/asm/arch-omap24xx/mem.h
+++ /dev/null
@@ -1,156 +0,0 @@
-/*
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _OMAP24XX_MEM_H_
-#define _OMAP24XX_MEM_H_
-
-#define SDRC_CS0_OSET	 0x0
-#define SDRC_CS1_OSET	 0x30  /* mirror CS1 regs appear offset 0x30 from CS0 */
-
-#ifndef __ASSEMBLY__
-/* struct's for holding data tables for current boards, they are getting used
-   early in init when NO global access are there */
-struct sdrc_data_s {
-	u32    sdrc_sharing;
-	u32    sdrc_mdcfg_0_ddr;
-	u32    sdrc_mdcfg_0_sdr;
-	u32    sdrc_actim_ctrla_0;
-	u32    sdrc_actim_ctrlb_0;
-	u32    sdrc_rfr_ctrl;
-	u32    sdrc_mr_0_ddr;
-	u32    sdrc_mr_0_sdr;
-	u32    sdrc_dllab_ctrl;
-} /*__attribute__ ((packed))*/;
-typedef struct sdrc_data_s sdrc_data_t;
-
-typedef enum {
-	STACKED		= 0,
-	IP_DDR		= 1,
-	COMBO_DDR	= 2,
-	IP_SDR		= 3,
-} mem_t;
-
-#endif
-
-/* Slower full frequency range default timings for x32 operation*/
-#define H4_2420_SDRC_SHARING		0x00000100
-#define H4_2420_SDRC_MDCFG_0_SDR	0x00D04010 /* discrete sdr module */
-#define H4_2420_SDRC_MR_0_SDR		0x00000031
-#define H4_2420_SDRC_MDCFG_0_DDR	0x01702011 /* descrite ddr module */
-#define H4_2420_COMBO_MDCFG_0_DDR	0x00801011 /* combo module */
-#define H4_2420_SDRC_MR_0_DDR		0x00000032
-
-#define H4_2422_SDRC_SHARING		0x00004b00
-#define H4_2422_SDRC_MDCFG_0_DDR	0x00801011 /* stacked ddr on 2422 */
-#define H4_2422_SDRC_MR_0_DDR		0x00000032
-
-/* ES1 work around timings */
-#define H4_242x_SDRC_ACTIM_CTRLA_0_ES1	0x9bead909  /* 165Mhz for use with 100/133 */
-#define H4_242x_SDRC_ACTIM_CTRLB_0_ES1	0x00000020
-#define H4_242x_SDRC_RFR_CTRL_ES1	    0x00002401	/* use over refresh for ES1 */
-
-/* optimized timings good for current shipping parts */
-#define H4_242X_SDRC_ACTIM_CTRLA_0_100MHz  0x5A59B485
-#define H4_242X_SDRC_ACTIM_CTRLB_0_100MHz  0x0000000e
-#define H4_242X_SDRC_ACTIM_CTRLA_0_133MHz  0x8BA6E6C8 /* temp warn 0 settings */
-#define H4_242X_SDRC_ACTIM_CTRLB_0_133MHz  0x00000010 /* temp warn 0 settings */
-#define H4_242X_SDRC_RFR_CTRL_100MHz	   0x0002da01
-#define H4_242X_SDRC_RFR_CTRL_133MHz	   0x0003de01
-#define H4_242x_SDRC_DLLAB_CTRL_100MHz	   0x0000980E /* 72deg, allow DPLLout*1 to work (combo)*/
-#define H4_242x_SDRC_DLLAB_CTRL_133MHz	   0x0000690E /* 72deg, for ES2 */
-
-#ifdef PRCM_CONFIG_II
-# define H4_2420_SDRC_ACTIM_CTRLA_0	H4_242X_SDRC_ACTIM_CTRLA_0_100MHz
-# define H4_2420_SDRC_ACTIM_CTRLB_0	H4_242X_SDRC_ACTIM_CTRLB_0_100MHz
-# define H4_2420_SDRC_RFR_CTRL		H4_242X_SDRC_RFR_CTRL_100MHz
-# define H4_2420_SDRC_DLLAB_CTRL    H4_242x_SDRC_DLLAB_CTRL_100MHz
-# define H4_2422_SDRC_ACTIM_CTRLA_0	H4_242X_SDRC_ACTIM_CTRLA_0_100MHz
-# define H4_2422_SDRC_ACTIM_CTRLB_0	H4_242X_SDRC_ACTIM_CTRLB_0_100MHz
-# define H4_2422_SDRC_RFR_CTRL		H4_242X_SDRC_RFR_CTRL_100MHz
-# define H4_2422_SDRC_DLLAB_CTRL    H4_242x_SDRC_DLLAB_CTRL_100MHz
-#elif PRCM_CONFIG_III
-# define H4_2420_SDRC_ACTIM_CTRLA_0	H4_242X_SDRC_ACTIM_CTRLA_0_133MHz
-# define H4_2420_SDRC_ACTIM_CTRLB_0	H4_242X_SDRC_ACTIM_CTRLB_0_133MHz
-# define H4_2420_SDRC_RFR_CTRL		H4_242X_SDRC_RFR_CTRL_133MHz
-# define H4_2420_SDRC_DLLAB_CTRL    H4_242x_SDRC_DLLAB_CTRL_133MHz
-# define H4_2422_SDRC_ACTIM_CTRLA_0	H4_242X_SDRC_ACTIM_CTRLA_0_100MHz
-# define H4_2422_SDRC_ACTIM_CTRLB_0	H4_242X_SDRC_ACTIM_CTRLB_0_100MHz
-# define H4_2422_SDRC_RFR_CTRL		H4_242X_SDRC_RFR_CTRL_100MHz
-# define H4_2422_SDRC_DLLAB_CTRL    H4_242x_SDRC_DLLAB_CTRL_100MHz
-#endif
-
-
-/* GPMC settings */
-#ifdef PRCM_CONFIG_II	     /* L3 at 100MHz */
-# ifdef CONFIG_SYS_NAND_BOOT
-#  define H4_24XX_GPMC_CONFIG1_0   0x0
-#  define H4_24XX_GPMC_CONFIG2_0   0x00141400
-#  define H4_24XX_GPMC_CONFIG3_0   0x00141400
-#  define H4_24XX_GPMC_CONFIG4_0   0x0F010F01
-#  define H4_24XX_GPMC_CONFIG5_0   0x010C1414
-#  define H4_24XX_GPMC_CONFIG6_0   0x00000A80
-# else	/* else NOR */
-#  define H4_24XX_GPMC_CONFIG1_0   0x3
-#  define H4_24XX_GPMC_CONFIG2_0   0x000f0f01
-#  define H4_24XX_GPMC_CONFIG3_0   0x00050502
-#  define H4_24XX_GPMC_CONFIG4_0   0x0C060C06
-#  define H4_24XX_GPMC_CONFIG5_0   0x01131F1F
-# endif /* endif CONFIG_SYS_NAND_BOOT */
-# define H4_24XX_GPMC_CONFIG7_0	  (0x00000C40|(H4_CS0_BASE >> 24))
-# define H4_24XX_GPMC_CONFIG1_1	  0x00011000
-# define H4_24XX_GPMC_CONFIG2_1	  0x001F1F00
-# define H4_24XX_GPMC_CONFIG3_1	  0x00080802
-# define H4_24XX_GPMC_CONFIG4_1	  0x1C091C09
-# define H4_24XX_GPMC_CONFIG5_1	  0x031A1F1F
-# define H4_24XX_GPMC_CONFIG6_1	  0x000003C2
-# define H4_24XX_GPMC_CONFIG7_1	  (0x00000F40|(H4_CS1_BASE >> 24))
-#endif /* endif PRCM_CONFIG_II */
-
-#ifdef PRCM_CONFIG_III	/* L3 at 133MHz */
-# ifdef CONFIG_SYS_NAND_BOOT
-#  define H4_24XX_GPMC_CONFIG1_0   0x0
-#  define H4_24XX_GPMC_CONFIG2_0   0x00141400
-#  define H4_24XX_GPMC_CONFIG3_0   0x00141400
-#  define H4_24XX_GPMC_CONFIG4_0   0x0F010F01
-#  define H4_24XX_GPMC_CONFIG5_0   0x010C1414
-#  define H4_24XX_GPMC_CONFIG6_0   0x00000A80
-# else	/* NOR boot */
-#  define H4_24XX_GPMC_CONFIG1_0   0x3
-#  define H4_24XX_GPMC_CONFIG2_0   0x00151501
-#  define H4_24XX_GPMC_CONFIG3_0   0x00060602
-#  define H4_24XX_GPMC_CONFIG4_0   0x10081008
-#  define H4_24XX_GPMC_CONFIG5_0   0x01131F1F
-#  define H4_24XX_GPMC_CONFIG6_0   0x000004c4
-# endif /* endif CONFIG_SYS_NAND_BOOT */
-# define H4_24XX_GPMC_CONFIG7_0	  (0x00000C40|(H4_CS0_BASE >> 24))
-# define H4_24XX_GPMC_CONFIG1_1	  0x00011000
-# define H4_24XX_GPMC_CONFIG2_1	  0x001f1f01
-# define H4_24XX_GPMC_CONFIG3_1	  0x00080803
-# define H4_24XX_GPMC_CONFIG4_1	  0x1C091C09
-# define H4_24XX_GPMC_CONFIG5_1	  0x041f1F1F
-# define H4_24XX_GPMC_CONFIG6_1	  0x000004C4
-# define H4_24XX_GPMC_CONFIG7_1	  (0x00000F40|(H4_CS1_BASE >> 24))
-#endif /* endif CONFIG_SYS_PRCM_III */
-
-#endif /* endif _OMAP24XX_MEM_H_ */
diff --git a/arch/arm/include/asm/arch-omap24xx/mux.h b/arch/arm/include/asm/arch-omap24xx/mux.h
deleted file mode 100644
index 4fdb9c635f..0000000000
--- a/arch/arm/include/asm/arch-omap24xx/mux.h
+++ /dev/null
@@ -1,176 +0,0 @@
-/*
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#ifndef _OMAP2420_MUX_H_
-#define _OMAP2420_MUX_H_
-
-#ifndef __ASSEMBLY__
-typedef  unsigned char uint8;
-typedef  unsigned int uint32;
-
-void muxSetupSDRC(void);
-void muxSetupGPMC(void);
-void muxSetupUsb0(void);
-void muxSetupUsbHost(void);
-void muxSetupUart3(void);
-void muxSetupI2C1(void);
-void muxSetupUART1(void);
-void muxSetupLCD(void);
-void muxSetupCamera(void);
-void muxSetupMMCSD(void) ;
-void muxSetupTouchScreen(void) ;
-void muxSetupHDQ(void);
-#endif
-
-#define USB_OTG_CTRL			        ((volatile uint32 *)0x4805E30C)
-
-/* Pin Muxing registers used for HDQ (Smart battery) */
-#define CONTROL_PADCONF_HDQ_SIO         ((volatile unsigned char *)0x48000115)
-
-/* Pin Muxing registers used for GPMC */
-#define CONTROL_PADCONF_GPMC_D2_BYTE0	((volatile unsigned char *)0x48000088)
-#define CONTROL_PADCONF_GPMC_D2_BYTE1	((volatile unsigned char *)0x48000089)
-#define CONTROL_PADCONF_GPMC_D2_BYTE2	((volatile unsigned char *)0x4800008A)
-#define CONTROL_PADCONF_GPMC_D2_BYTE3	((volatile unsigned char *)0x4800008B)
-
-#define CONTROL_PADCONF_GPMC_NCS0_BYTE0	((volatile unsigned char *)0x4800008C)
-#define CONTROL_PADCONF_GPMC_NCS0_BYTE1	((volatile unsigned char *)0x4800008D)
-#define CONTROL_PADCONF_GPMC_NCS0_BYTE2	((volatile unsigned char *)0x4800008E)
-#define CONTROL_PADCONF_GPMC_NCS0_BYTE3	((volatile unsigned char *)0x4800008F)
-#define CONTROL_PADCONF_GPMC_NCS0_BYTE4	(0x48000090)
-#define CONTROL_PADCONF_GPMC_NCS0_BYTE5	(0x48000091)
-#define CONTROL_PADCONF_GPMC_NCS0_BYTE6	(0x48000092)
-#define CONTROL_PADCONF_GPMC_NCS0_BYTE7	(0x48000093)
-
-/* Pin Muxing registers used for SDRC */
-#define CONTROL_PADCONF_SDRC_NCS0_BYTE0 ((volatile unsigned char *)0x480000A0)
-#define CONTROL_PADCONF_SDRC_NCS0_BYTE1 ((volatile unsigned char *)0x480000A1)
-#define CONTROL_PADCONF_SDRC_NCS0_BYTE2 ((volatile unsigned char *)0x480000A2)
-#define CONTROL_PADCONF_SDRC_NCS0_BYTE3 ((volatile unsigned char *)0x480000A3)
-
-#define CONTROL_PADCONF_SDRC_A14_BYTE0	((volatile unsigned char *)0x48000030)
-#define CONTROL_PADCONF_SDRC_A14_BYTE1	((volatile unsigned char *)0x48000031)
-#define CONTROL_PADCONF_SDRC_A14_BYTE2	((volatile unsigned char *)0x48000032)
-#define CONTROL_PADCONF_SDRC_A14_BYTE3	((volatile unsigned char *)0x48000033)
-
-/* Pin Muxing registers used for Touch Screen (SPI) */
-#define CONTROL_PADCONF_SPI1_CLK        ((volatile unsigned char *)0x480000FF)
-#define CONTROL_PADCONF_SPI1_SIMO       ((volatile unsigned char *)0x48000100)
-#define CONTROL_PADCONF_SPI1_SOMI       ((volatile unsigned char *)0x48000101)
-#define CONTROL_PADCONF_SPI1_NCS0       ((volatile unsigned char *)0x48000102)
-#define CONTROL_PADCONF_SPI1_NCS1       (0x48000103)
-
-#define CONTROL_PADCONF_MCBSP1_FSR      ((volatile unsigned char *)0x4800010B)
-
-/* Pin Muxing registers used for MMCSD */
-#define CONTROL_PADCONF_MMC_CLKI        ((volatile unsigned char *)0x480000FE)
-#define CONTROL_PADCONF_MMC_CLKO        ((volatile unsigned char *)0x480000F3)
-#define CONTROL_PADCONF_MMC_CMD         ((volatile unsigned char *)0x480000F4)
-#define CONTROL_PADCONF_MMC_DAT0        ((volatile unsigned char *)0x480000F5)
-#define CONTROL_PADCONF_MMC_DAT1        ((volatile unsigned char *)0x480000F6)
-#define CONTROL_PADCONF_MMC_DAT2        ((volatile unsigned char *)0x480000F7)
-#define CONTROL_PADCONF_MMC_DAT3        ((volatile unsigned char *)0x480000F8)
-#define CONTROL_PADCONF_MMC_DAT_DIR0    ((volatile unsigned char *)0x480000F9)
-#define CONTROL_PADCONF_MMC_DAT_DIR1    ((volatile unsigned char *)0x480000FA)
-#define CONTROL_PADCONF_MMC_DAT_DIR2    ((volatile unsigned char *)0x480000FB)
-#define CONTROL_PADCONF_MMC_DAT_DIR3    ((volatile unsigned char *)0x480000FC)
-#define CONTROL_PADCONF_MMC_CMD_DIR     ((volatile unsigned char *)0x480000FD)
-
-#define CONTROL_PADCONF_SDRC_A14        ((volatile unsigned char *)0x48000030)
-#define CONTROL_PADCONF_SDRC_A13        ((volatile unsigned char *)0x48000031)
-
-/* Pin Muxing registers used for CAMERA */
-#define CONTROL_PADCONF_SYS_NRESWARM    ((volatile unsigned char *)0x4800012B)
-
-#define CONTROL_PADCONF_CAM_XCLK        ((volatile unsigned char *)0x480000DC)
-#define CONTROL_PADCONF_CAM_LCLK        ((volatile unsigned char *)0x480000DB)
-#define CONTROL_PADCONF_CAM_VS          ((volatile unsigned char *)0x480000DA)
-#define CONTROL_PADCONF_CAM_HS          ((volatile unsigned char *)0x480000D9)
-#define CONTROL_PADCONF_CAM_D0          ((volatile unsigned char *)0x480000D8)
-#define CONTROL_PADCONF_CAM_D1          ((volatile unsigned char *)0x480000D7)
-#define CONTROL_PADCONF_CAM_D2          ((volatile unsigned char *)0x480000D6)
-#define CONTROL_PADCONF_CAM_D3          ((volatile unsigned char *)0x480000D5)
-#define CONTROL_PADCONF_CAM_D4          ((volatile unsigned char *)0x480000D4)
-#define CONTROL_PADCONF_CAM_D5          ((volatile unsigned char *)0x480000D3)
-#define CONTROL_PADCONF_CAM_D6          ((volatile unsigned char *)0x480000D2)
-#define CONTROL_PADCONF_CAM_D7          ((volatile unsigned char *)0x480000D1)
-#define CONTROL_PADCONF_CAM_D8          ((volatile unsigned char *)0x480000D0)
-#define CONTROL_PADCONF_CAM_D9          ((volatile unsigned char *)0x480000CF)
-
-/* Pin Muxing registers used for LCD */
-#define CONTROL_PADCONF_DSS_D0          ((volatile unsigned char *)0x480000B3)
-#define CONTROL_PADCONF_DSS_D1          ((volatile unsigned char *)0x480000B4)
-#define CONTROL_PADCONF_DSS_D2          ((volatile unsigned char *)0x480000B5)
-#define CONTROL_PADCONF_DSS_D3          ((volatile unsigned char *)0x480000B6)
-#define CONTROL_PADCONF_DSS_D4          ((volatile unsigned char *)0x480000B7)
-#define CONTROL_PADCONF_DSS_D5          ((volatile unsigned char *)0x480000B8)
-#define CONTROL_PADCONF_DSS_D6          ((volatile unsigned char *)0x480000B9)
-#define CONTROL_PADCONF_DSS_D7          ((volatile unsigned char *)0x480000BA)
-#define CONTROL_PADCONF_DSS_D8          ((volatile unsigned char *)0x480000BB)
-#define CONTROL_PADCONF_DSS_D9          ((volatile unsigned char *)0x480000BC)
-#define CONTROL_PADCONF_DSS_D10         ((volatile unsigned char *)0x480000BD)
-#define CONTROL_PADCONF_DSS_D11         ((volatile unsigned char *)0x480000BE)
-#define CONTROL_PADCONF_DSS_D12         ((volatile unsigned char *)0x480000BF)
-#define CONTROL_PADCONF_DSS_D13         ((volatile unsigned char *)0x480000C0)
-#define CONTROL_PADCONF_DSS_D14         ((volatile unsigned char *)0x480000C1)
-#define CONTROL_PADCONF_DSS_D15         ((volatile unsigned char *)0x480000C2)
-#define CONTROL_PADCONF_DSS_D16         ((volatile unsigned char *)0x480000C3)
-#define CONTROL_PADCONF_DSS_D17         ((volatile unsigned char *)0x480000C4)
-#define CONTROL_PADCONF_DSS_PCLK        ((volatile unsigned char *)0x480000CB)
-#define CONTROL_PADCONF_DSS_VSYNC       ((volatile unsigned char *)0x480000CC)
-#define CONTROL_PADCONF_DSS_HSYNC       ((volatile unsigned char *)0x480000CD)
-#define CONTROL_PADCONF_DSS_ACBIAS      ((volatile unsigned char *)0x480000CE)
-
-/* Pin Muxing registers used for UART1 */
-#define CONTROL_PADCONF_UART1_CTS       ((volatile unsigned char *)0x480000C5)
-#define CONTROL_PADCONF_UART1_RTS       ((volatile unsigned char *)0x480000C6)
-#define CONTROL_PADCONF_UART1_TX        ((volatile unsigned char *)0x480000C7)
-#define CONTROL_PADCONF_UART1_RX        ((volatile unsigned char *)0x480000C8)
-
-/* Pin Muxing registers used for I2C1 */
-#define CONTROL_PADCONF_I2C1_SCL        ((volatile unsigned char *)0x48000111)
-#define CONTROL_PADCONF_I2C1_SDA        ((volatile unsigned char *)0x48000112)
-
-/* Pin Muxing registres used for USB0. */
-#define CONTROL_PADCONF_USB0_PUEN		((volatile uint8 *)0x4800011D)
-#define CONTROL_PADCONF_USB0_VP			((volatile uint8 *)0x4800011E)
-#define CONTROL_PADCONF_USB0_VM			((volatile uint8 *)0x4800011F)
-#define CONTROL_PADCONF_USB0_RCV		((volatile uint8 *)0x48000120)
-#define CONTROL_PADCONF_USB0_TXEN		((volatile uint8 *)0x48000121)
-#define CONTROL_PADCONF_USB0_SE0		((volatile uint8 *)0x48000122)
-#define CONTROL_PADCONF_USB0_DAT		((volatile uint8 *)0x48000123)
-
-/* Pin Muxing registres used for USB1. */
-#define CONTROL_PADCONF_USB1_RCV	(0x480000EB)
-#define CONTROL_PADCONF_USB1_TXEN	(0x480000EC)
-
-/* Pin Muxing registers used for UART3/IRDA */
-#define CONTROL_PADCONF_UART3_TX_IRTX	((volatile uint8 *)0x48000118)
-#define CONTROL_PADCONF_UART3_RX_IRRX	((volatile uint8 *)0x48000119)
-
-/* Pin Muxing registers used for GPIO */
-#define CONTROL_PADCONF_GPIO69		(0x480000ED)
-#define CONTROL_PADCONF_GPIO70		(0x480000EE)
-#define CONTROL_PADCONF_GPIO102		(0x48000116)
-#define CONTROL_PADCONF_GPIO103		(0x48000117)
-#define CONTROL_PADCONF_GPIO104		(0x48000118)
-#define CONTROL_PADCONF_GPIO105		(0x48000119)
-
-#endif
diff --git a/arch/arm/include/asm/arch-omap24xx/omap2420.h b/arch/arm/include/asm/arch-omap24xx/omap2420.h
deleted file mode 100644
index 5724f5d4ba..0000000000
--- a/arch/arm/include/asm/arch-omap24xx/omap2420.h
+++ /dev/null
@@ -1,236 +0,0 @@
-/*
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _OMAP2420_SYS_H_
-#define _OMAP2420_SYS_H_
-
-#include <asm/sizes.h>
-
-/*
- * 2420 specific Section
- */
-
-/* L3 Firewall */
-#define A_REQINFOPERM0        0x68005048
-#define A_READPERM0           0x68005050
-#define A_WRITEPERM0          0x68005058
-/* #define GP_DEVICE	(BIT8|BIT9)  FIXME -- commented out to make compile -- FIXME */
-
-/* L3 Firewall */
-#define A_REQINFOPERM0        0x68005048
-#define A_READPERM0           0x68005050
-#define A_WRITEPERM0          0x68005058
-
-/* CONTROL */
-#define OMAP2420_CTRL_BASE    (0x48000000)
-#define CONTROL_STATUS        (OMAP2420_CTRL_BASE + 0x2F8)
-
-/* device type */
-#define TST_DEVICE	0x0
-#define EMU_DEVICE	0x1
-#define HS_DEVICE	0x2
-#define GP_DEVICE	0x3
-
-/* TAP information */
-#define OMAP2420_TAP_BASE     (0x48014000)
-#define TAP_IDCODE_REG        (OMAP2420_TAP_BASE+0x204)
-#define PRODUCTION_ID         (OMAP2420_TAP_BASE+0x208)
-
-/* GPMC */
-#define OMAP2420_GPMC_BASE    (0x6800A000)
-#define GPMC_SYSCONFIG        (OMAP2420_GPMC_BASE+0x10)
-#define GPMC_IRQENABLE        (OMAP2420_GPMC_BASE+0x1C)
-#define GPMC_TIMEOUT_CONTROL  (OMAP2420_GPMC_BASE+0x40)
-#define GPMC_CONFIG           (OMAP2420_GPMC_BASE+0x50)
-#define GPMC_CONFIG1_0        (OMAP2420_GPMC_BASE+0x60)
-#define GPMC_CONFIG2_0        (OMAP2420_GPMC_BASE+0x64)
-#define GPMC_CONFIG3_0        (OMAP2420_GPMC_BASE+0x68)
-#define GPMC_CONFIG4_0        (OMAP2420_GPMC_BASE+0x6C)
-#define GPMC_CONFIG5_0        (OMAP2420_GPMC_BASE+0x70)
-#define GPMC_CONFIG6_0        (OMAP2420_GPMC_BASE+0x74)
-#define GPMC_CONFIG7_0	      (OMAP2420_GPMC_BASE+0x78)
-#define GPMC_CONFIG1_1        (OMAP2420_GPMC_BASE+0x90)
-#define GPMC_CONFIG2_1        (OMAP2420_GPMC_BASE+0x94)
-#define GPMC_CONFIG3_1        (OMAP2420_GPMC_BASE+0x98)
-#define GPMC_CONFIG4_1        (OMAP2420_GPMC_BASE+0x9C)
-#define GPMC_CONFIG5_1        (OMAP2420_GPMC_BASE+0xA0)
-#define GPMC_CONFIG6_1        (OMAP2420_GPMC_BASE+0xA4)
-#define GPMC_CONFIG7_1	      (OMAP2420_GPMC_BASE+0xA8)
-#define GPMC_CONFIG1_2        (OMAP2420_GPMC_BASE+0xC0)
-#define GPMC_CONFIG2_2        (OMAP2420_GPMC_BASE+0xC4)
-#define GPMC_CONFIG3_2        (OMAP2420_GPMC_BASE+0xC8)
-#define GPMC_CONFIG4_2        (OMAP2420_GPMC_BASE+0xCC)
-#define GPMC_CONFIG5_2        (OMAP2420_GPMC_BASE+0xD0)
-#define GPMC_CONFIG6_2        (OMAP2420_GPMC_BASE+0xD4)
-#define GPMC_CONFIG7_2        (OMAP2420_GPMC_BASE+0xD8)
-#define GPMC_CONFIG1_3        (OMAP2420_GPMC_BASE+0xF0)
-#define GPMC_CONFIG2_3        (OMAP2420_GPMC_BASE+0xF4)
-#define GPMC_CONFIG3_3        (OMAP2420_GPMC_BASE+0xF8)
-#define GPMC_CONFIG4_3        (OMAP2420_GPMC_BASE+0xFC)
-#define GPMC_CONFIG5_3        (OMAP2420_GPMC_BASE+0x100)
-#define GPMC_CONFIG6_3        (OMAP2420_GPMC_BASE+0x104)
-#define GPMC_CONFIG7_3	      (OMAP2420_GPMC_BASE+0x108)
-
-/* SMS */
-#define OMAP2420_SMS_BASE 0x68008000
-#define SMS_SYSCONFIG     (OMAP2420_SMS_BASE+0x10)
-#define SMS_CLASS_ARB0    (OMAP2420_SMS_BASE+0xD0)
-# define BURSTCOMPLETE_GROUP7    BIT31
-
-/* SDRC */
-#define OMAP2420_SDRC_BASE 0x68009000
-#define SDRC_SYSCONFIG     (OMAP2420_SDRC_BASE+0x10)
-#define SDRC_STATUS        (OMAP2420_SDRC_BASE+0x14)
-#define SDRC_CS_CFG        (OMAP2420_SDRC_BASE+0x40)
-#define SDRC_SHARING       (OMAP2420_SDRC_BASE+0x44)
-#define SDRC_DLLA_CTRL     (OMAP2420_SDRC_BASE+0x60)
-#define SDRC_DLLB_CTRL     (OMAP2420_SDRC_BASE+0x68)
-#define SDRC_POWER         (OMAP2420_SDRC_BASE+0x70)
-#define SDRC_MCFG_0        (OMAP2420_SDRC_BASE+0x80)
-#define SDRC_MR_0          (OMAP2420_SDRC_BASE+0x84)
-#define SDRC_ACTIM_CTRLA_0 (OMAP2420_SDRC_BASE+0x9C)
-#define SDRC_ACTIM_CTRLB_0 (OMAP2420_SDRC_BASE+0xA0)
-#define SDRC_ACTIM_CTRLA_1 (OMAP2420_SDRC_BASE+0xC4)
-#define SDRC_ACTIM_CTRLB_1 (OMAP2420_SDRC_BASE+0xC8)
-#define SDRC_RFR_CTRL      (OMAP2420_SDRC_BASE+0xA4)
-#define SDRC_MANUAL_0      (OMAP2420_SDRC_BASE+0xA8)
-#define OMAP2420_SDRC_CS0  0x80000000
-#define OMAP2420_SDRC_CS1  0xA0000000
-#define CMD_NOP            0x0
-#define CMD_PRECHARGE      0x1
-#define CMD_AUTOREFRESH    0x2
-#define CMD_ENTR_PWRDOWN   0x3
-#define CMD_EXIT_PWRDOWN   0x4
-#define CMD_ENTR_SRFRSH    0x5
-#define CMD_CKE_HIGH       0x6
-#define CMD_CKE_LOW        0x7
-#define SOFTRESET          BIT1
-#define SMART_IDLE         (0x2 << 3)
-#define REF_ON_IDLE        (0x1 << 6)
-
-
-/* UART */
-#define OMAP2420_UART1	      0x4806A000
-#define OMAP2420_UART2	      0x4806C000
-#define OMAP2420_UART3        0x4806E000
-
-/* General Purpose Timers */
-#define OMAP2420_GPT1         0x48028000
-#define OMAP2420_GPT2         0x4802A000
-#define OMAP2420_GPT3         0x48078000
-#define OMAP2420_GPT4         0x4807A000
-#define OMAP2420_GPT5         0x4807C000
-#define OMAP2420_GPT6         0x4807E000
-#define OMAP2420_GPT7         0x48080000
-#define OMAP2420_GPT8         0x48082000
-#define OMAP2420_GPT9         0x48084000
-#define OMAP2420_GPT10        0x48086000
-#define OMAP2420_GPT11        0x48088000
-#define OMAP2420_GPT12        0x4808A000
-
-/* timer regs offsets (32 bit regs) */
-#define TIDR       0x0      /* r */
-#define TIOCP_CFG  0x10     /* rw */
-#define TISTAT     0x14     /* r */
-#define TISR       0x18     /* rw */
-#define TIER       0x1C     /* rw */
-#define TWER       0x20     /* rw */
-#define TCLR       0x24     /* rw */
-#define TCRR       0x28     /* rw */
-#define TLDR       0x2C     /* rw */
-#define TTGR       0x30     /* rw */
-#define TWPS       0x34     /* r */
-#define TMAR       0x38     /* rw */
-#define TCAR1      0x3c     /* r */
-#define TSICR      0x40     /* rw */
-#define TCAR2      0x44     /* r */
-
-/* WatchDog Timers (1 secure, 3 GP) */
-#define WD1_BASE              0x48020000
-#define WD2_BASE              0x48022000
-#define WD3_BASE              0x48024000
-#define WD4_BASE              0x48026000
-#define WWPS       0x34     /* r */
-#define WSPR       0x48     /* rw */
-#define WD_UNLOCK1 0xAAAA
-#define WD_UNLOCK2 0x5555
-
-/* PRCM */
-#define OMAP2420_CM_BASE 0x48008000
-#define PRCM_CLKCFG_CTRL (OMAP2420_CM_BASE+0x080)
-#define CM_CLKSEL_MPU    (OMAP2420_CM_BASE+0x140)
-#define CM_FCLKEN1_CORE  (OMAP2420_CM_BASE+0x200)
-#define CM_FCLKEN2_CORE  (OMAP2420_CM_BASE+0x204)
-#define CM_ICLKEN1_CORE  (OMAP2420_CM_BASE+0x210)
-#define CM_ICLKEN2_CORE  (OMAP2420_CM_BASE+0x214)
-#define CM_CLKSEL1_CORE  (OMAP2420_CM_BASE+0x240)
-#define CM_CLKSEL_WKUP   (OMAP2420_CM_BASE+0x440)
-#define CM_CLKSEL2_CORE  (OMAP2420_CM_BASE+0x244)
-#define CM_CLKSEL_GFX    (OMAP2420_CM_BASE+0x340)
-#define PM_RSTCTRL_WKUP  (OMAP2420_CM_BASE+0x450)
-#define CM_CLKEN_PLL     (OMAP2420_CM_BASE+0x500)
-#define CM_IDLEST_CKGEN  (OMAP2420_CM_BASE+0x520)
-#define CM_CLKSEL1_PLL   (OMAP2420_CM_BASE+0x540)
-#define CM_CLKSEL2_PLL   (OMAP2420_CM_BASE+0x544)
-#define CM_CLKSEL_DSP    (OMAP2420_CM_BASE+0x840)
-
-/*
- * H4 specific Section
- */
-
-/*
- *  The 2420's chip selects are programmable.  The mask ROM
- *  does configure CS0 to 0x08000000 before dispatch.  So, if
- *  you want your code to live below that address, you have to
- *  be prepared to jump though hoops, to reset the base address.
- */
-#if defined(CONFIG_OMAP2420H4)
-/* GPMC */
-#ifdef CONFIG_VIRTIO_A        /* Pre version B */
-# define H4_CS0_BASE           0x08000000  /* flash (64 Meg aligned) */
-# define H4_CS1_BASE           0x04000000  /* debug board */
-# define H4_CS2_BASE           0x0A000000  /* wifi board */
-#else
-# define H4_CS0_BASE           0x08000000  /* flash (64 Meg aligned) */
-# define H4_CS1_BASE           0x04000000  /* debug board */
-# define H4_CS2_BASE           0x0C000000  /* wifi board */
-#endif
-
-/* base address for indirect vectors (internal boot mode) */
-#define SRAM_OFFSET0          0x40000000
-#define SRAM_OFFSET1          0x00200000
-#define SRAM_OFFSET2          0x0000F800
-#define SRAM_VECT_CODE       (SRAM_OFFSET0|SRAM_OFFSET1|SRAM_OFFSET2)
-
-/* FPGA on Debug board.*/
-#define ETH_CONTROL_REG       (H4_CS1_BASE+0x30b)
-#define LAN_RESET_REGISTER    (H4_CS1_BASE+0x1c)
-#endif  /* endif CONFIG_2420H4 */
-
-/* Common */
-#define LOW_LEVEL_SRAM_STACK  0x4020FFFC
-
-#define PERIFERAL_PORT_BASE   0x480FE003
-
-#endif
diff --git a/arch/arm/include/asm/arch-omap24xx/sys_info.h b/arch/arm/include/asm/arch-omap24xx/sys_info.h
deleted file mode 100644
index 53c231a5e4..0000000000
--- a/arch/arm/include/asm/arch-omap24xx/sys_info.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _OMAP24XX_SYS_INFO_H_
-#define _OMAP24XX_SYS_INFO_H_
-
-typedef struct  h4_system_data {
-	/* base board info */
-	u32 base_b_rev;		/* rev from base board i2c */
-	/* cpu board info */
-	u32 cpu_b_rev;		/* rev from cpu board i2c */
-	u32 cpu_b_mux;		/* mux type on daughter board */
-	u32 cpu_b_ddr_type;	/* mem type */
-	u32 cpu_b_ddr_speed;	/* ddr speed rating */
-	u32 cpu_b_switches;	/* boot ctrl switch settings */
-	/* cpu info */
-	u32 cpu_type;		/* type of cpu; 2420, 2422, 2430,...*/
-	u32 cpu_rev;		/* rev of given cpu; ES1, ES2,...*/
-} h4_sys_data;
-
-#define XDR_POP           5      /* package on package part */
-#define SDR_DISCRETE      4      /* 128M memory SDR module*/
-#define DDR_STACKED       3      /* stacked part on 2422 */
-#define DDR_COMBO         2      /* combo part on cpu daughter card (menalaeus) */
-#define DDR_DISCRETE      1      /* 2x16 parts on daughter card */
-
-#define DDR_100           100    /* type found on most mem d-boards */
-#define DDR_111           111    /* some combo parts */
-#define DDR_133           133    /* most combo, some mem d-boards */
-#define DDR_165           165    /* future parts */
-
-#define CPU_2420          0x2420
-#define CPU_2422          0x2422 /* 2420 + 64M stacked */
-#define CPU_2423          0x2423 /* 2420 + 96M stacked */
-
-#define CPU_2422_ES1      1
-#define CPU_2422_ES2      2
-#define CPU_2420_ES1      1
-#define CPU_2420_ES2      2
-#define CPU_2420_2422_ES1 1
-
-#define CPU_2420_CHIPID   0x0B5D9000
-#define CPU_24XX_ID_MASK  0x0FFFF000
-#define CPU_242X_REV_MASK 0xF0000000
-#define CPU_242X_PID_MASK 0x000F0000
-
-#define BOARD_H4_MENELAUS 1
-#define BOARD_H4_SDP      2
-
-#define GPMC_MUXED        1
-#define GPMC_NONMUXED     0
-
-#define TYPE_NAND         0x800   /* bit pos for nand in gpmc reg */
-#define TYPE_NOR          0x000
-
-#define WIDTH_8BIT        0x0000
-#define WIDTH_16BIT       0x1000  /* bit pos for 16 bit in gpmc */
-
-#define I2C_MENELAUS 0x72	/* i2c id for companion chip */
-
-#endif
diff --git a/arch/arm/include/asm/arch-omap24xx/sys_proto.h b/arch/arm/include/asm/arch-omap24xx/sys_proto.h
deleted file mode 100644
index 9d8e5b2622..0000000000
--- a/arch/arm/include/asm/arch-omap24xx/sys_proto.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
-  */
-#ifndef _OMAP24XX_SYS_PROTO_H_
-#define _OMAP24XX_SYS_PROTO_H_
-
-void prcm_init(void);
-void memif_init(void);
-void sdrc_init(void);
-void do_sdrc_init(u32,u32);
-void gpmc_init(void);
-
-void ether_init(void);
-void watchdog_init(void);
-void set_muxconf_regs(void);
-void peripheral_enable(void);
-
-u32 get_cpu_type(void);
-u32 get_cpu_rev(void);
-u32 get_mem_type(void);
-u32 get_sysboot_value(void);
-u32 get_gpmc0_base(void);
-u32 is_gpmc_muxed(void);
-u32 get_gpmc0_type(void);
-u32 get_gpmc0_width(void);
-u32 wait_on_value(u32 read_bit_mask, u32 match_value, u32 read_addr, u32 bound);
-u32 get_board_type(void);
-void display_board_info(u32);
-void update_mux(u32,u32);
-u32 get_sdr_cs_size(u32 offset);
-
-u32 running_in_sdram(void);
-u32 running_in_sram(void);
-u32 running_in_flash(void);
-u32 running_from_internal_boot(void);
-u32 get_device_type(void);
-#endif
diff --git a/arch/arm/lib/cache.c b/arch/arm/lib/cache.c
index b545fb79bc..8b1c8ed4bf 100644
--- a/arch/arm/lib/cache.c
+++ b/arch/arm/lib/cache.c
@@ -27,7 +27,7 @@
 
 void  __flush_cache(unsigned long start, unsigned long size)
 {
-#if defined(CONFIG_OMAP2420) || defined(CONFIG_ARM1136)
+#if defined(CONFIG_ARM1136)
 	void arm1136_cache_flush(void);
 
 	arm1136_cache_flush();