Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx

Conflicts:
	drivers/usb/host/ehci-pci.c

Signed-off-by: Wolfgang Denk <wd@denx.de>

34 files changed, 1699 insertions, 191 deletions

diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile
index cbb0fc6bbd..d61d34c905 100644
--- a/arch/powerpc/cpu/mpc85xx/Makefile
+++ b/arch/powerpc/cpu/mpc85xx/Makefile
@@ -55,9 +55,13 @@ COBJS-$(CONFIG_P1011)	+= ddr-gen3.o
 COBJS-$(CONFIG_P1012)	+= ddr-gen3.o
 COBJS-$(CONFIG_P1013)	+= ddr-gen3.o
 COBJS-$(CONFIG_P1014)	+= ddr-gen3.o
+COBJS-$(CONFIG_P1015)	+= ddr-gen3.o
+COBJS-$(CONFIG_P1016)	+= ddr-gen3.o
 COBJS-$(CONFIG_P1020)	+= ddr-gen3.o
 COBJS-$(CONFIG_P1021)	+= ddr-gen3.o
 COBJS-$(CONFIG_P1022)	+= ddr-gen3.o
+COBJS-$(CONFIG_P1024)	+= ddr-gen3.o
+COBJS-$(CONFIG_P1025)	+= ddr-gen3.o
 COBJS-$(CONFIG_P2010)	+= ddr-gen3.o
 COBJS-$(CONFIG_P2020)	+= ddr-gen3.o
 COBJS-$(CONFIG_PPC_P3041)	+= ddr-gen3.o
@@ -69,7 +73,7 @@ COBJS-$(CONFIG_OF_LIBFDT) += fdt.o
 COBJS-$(CONFIG_FSL_CORENET) += liodn.o
 COBJS-$(CONFIG_MP)	+= mp.o
 COBJS-$(CONFIG_PCI)	+= pci.o
-COBJS-$(CONFIG_FSL_CORENET) += portals.o
+COBJS-$(CONFIG_SYS_DPAA_QBMAN) += portals.o
 
 # various SoC specific assignments
 COBJS-$(CONFIG_PPC_P3041) += p3041_ids.o
@@ -87,12 +91,20 @@ COBJS-$(CONFIG_MPC8548) += mpc8548_serdes.o
 COBJS-$(CONFIG_MPC8568) += mpc8568_serdes.o
 COBJS-$(CONFIG_MPC8569) += mpc8569_serdes.o
 COBJS-$(CONFIG_MPC8572) += mpc8572_serdes.o
+COBJS-$(CONFIG_P1010)	+= p1010_serdes.o
 COBJS-$(CONFIG_P1011)	+= p1021_serdes.o
 COBJS-$(CONFIG_P1012)	+= p1021_serdes.o
 COBJS-$(CONFIG_P1013)	+= p1022_serdes.o
+COBJS-$(CONFIG_P1014)	+= p1010_serdes.o
+COBJS-$(CONFIG_P1015)	+= p1021_serdes.o
+COBJS-$(CONFIG_P1016)	+= p1021_serdes.o
+COBJS-$(CONFIG_P1017)	+= p1023_serdes.o
 COBJS-$(CONFIG_P1020)	+= p1021_serdes.o
 COBJS-$(CONFIG_P1021)	+= p1021_serdes.o
 COBJS-$(CONFIG_P1022)	+= p1022_serdes.o
+COBJS-$(CONFIG_P1023)	+= p1023_serdes.o
+COBJS-$(CONFIG_P1024)	+= p1021_serdes.o
+COBJS-$(CONFIG_P1025)	+= p1021_serdes.o
 COBJS-$(CONFIG_P2010)	+= p2020_serdes.o
 COBJS-$(CONFIG_P2020)	+= p2020_serdes.o
 COBJS-$(CONFIG_PPC_P3041) += p3041_serdes.o
diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c
index 1aad2ba925..49ea6cc752 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu.c
@@ -33,6 +33,7 @@
 #include <asm/cache.h>
 #include <asm/io.h>
 #include <asm/mmu.h>
+#include <asm/fsl_ifc.h>
 #include <asm/fsl_law.h>
 #include <asm/fsl_lbc.h>
 #include <post.h>
@@ -280,7 +281,8 @@ int cpu_mmc_init(bd_t *bis)
 
 /*
  * Print out the state of various machine registers.
- * Currently prints out LAWs, BR0/OR0, and TLBs
+ * Currently prints out LAWs, BR0/OR0 for LBC, CSPR/CSOR/Timing
+ * parameters for IFC and TLBs
  */
 void mpc85xx_reginfo(void)
 {
@@ -289,6 +291,9 @@ void mpc85xx_reginfo(void)
 #if defined(CONFIG_FSL_LBC)
 	print_lbc_regs();
 #endif
+#ifdef CONFIG_FSL_IFC
+	print_ifc_regs();
+#endif
 
 }
 
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c
index 8ece970097..5642cd7b05 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c
@@ -37,6 +37,10 @@
 #include <asm/fsl_law.h>
 #include <asm/fsl_serdes.h>
 #include "mp.h"
+#ifdef CONFIG_SYS_QE_FW_IN_NAND
+#include <nand.h>
+#include <errno.h>
+#endif
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -384,12 +388,6 @@ int cpu_init_r(void)
 
 	enable_cpc();
 
-#ifdef CONFIG_QE
-	uint qe_base = CONFIG_SYS_IMMR + 0x00080000; /* QE immr base */
-	qe_init(qe_base);
-	qe_reset();
-#endif
-
 	/* needs to be in ram since code uses global static vars */
 	fsl_serdes_init();
 
@@ -449,3 +447,25 @@ int sata_initialize(void)
 	return 1;
 }
 #endif
+
+void cpu_secondary_init_r(void)
+{
+#ifdef CONFIG_QE
+	uint qe_base = CONFIG_SYS_IMMR + 0x00080000; /* QE immr base */
+#ifdef CONFIG_SYS_QE_FW_IN_NAND
+	int ret;
+	size_t fw_length = CONFIG_SYS_QE_FW_LENGTH;
+
+	/* load QE firmware from NAND flash to DDR first */
+	ret = nand_read(&nand_info[0], (loff_t)CONFIG_SYS_QE_FW_IN_NAND,
+			&fw_length, (u_char *)CONFIG_SYS_QE_FW_ADDR);
+
+	if (ret && ret == -EUCLEAN) {
+		printf ("NAND read for QE firmware at offset %x failed %d\n",
+				CONFIG_SYS_QE_FW_IN_NAND, ret);
+	}
+#endif
+	qe_init(qe_base);
+	qe_reset();
+#endif
+}
diff --git a/arch/powerpc/cpu/mpc85xx/fdt.c b/arch/powerpc/cpu/mpc85xx/fdt.c
index 00fa752996..642f6c54bd 100644
--- a/arch/powerpc/cpu/mpc85xx/fdt.c
+++ b/arch/powerpc/cpu/mpc85xx/fdt.c
@@ -338,6 +338,9 @@ void fdt_add_enet_stashing(void *fdt)
 	do_fixup_by_compat_u32(fdt, "gianfar", "rx-stash-len", 96, 1);
 
 	do_fixup_by_compat_u32(fdt, "gianfar", "rx-stash-idx", 0, 1);
+	do_fixup_by_compat(fdt, "fsl,etsec2", "bd-stash", NULL, 0, 1);
+	do_fixup_by_compat_u32(fdt, "fsl,etsec2", "rx-stash-len", 96, 1);
+	do_fixup_by_compat_u32(fdt, "fsl,etsec2", "rx-stash-idx", 0, 1);
 }
 
 #if defined(CONFIG_SYS_DPAA_FMAN) || defined(CONFIG_SYS_DPAA_PME)
@@ -483,4 +486,13 @@ void ft_cpu_setup(void *blob, bd_t *bd)
 #ifdef CONFIG_SYS_SRIO
 	ft_srio_setup(blob);
 #endif
+
+	/*
+	 * system-clock = CCB clock/2
+	 * Here gd->bus_clk = CCB clock
+	 * We are using the system clock as 1588 Timer reference
+	 * clock source select
+	 */
+	do_fixup_by_compat_u32(blob, "fsl,gianfar-ptp-timer",
+			"timer-frequency", gd->bus_clk/2, 1);
 }
diff --git a/arch/powerpc/cpu/mpc85xx/p1010_serdes.c b/arch/powerpc/cpu/mpc85xx/p1010_serdes.c
new file mode 100644
index 0000000000..e8a0387ca0
--- /dev/null
+++ b/arch/powerpc/cpu/mpc85xx/p1010_serdes.c
@@ -0,0 +1,75 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Author: Prabhakar Kushwaha <prabhakar@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <config.h>
+#include <common.h>
+#include <asm/io.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_serdes.h>
+
+#define SRDS1_MAX_LANES		4
+#define SRDS2_MAX_LANES		2
+
+static u32 serdes1_prtcl_map, serdes2_prtcl_map;
+
+static const u8 serdes1_cfg_tbl[][SRDS1_MAX_LANES] = {
+	[0x00] = {NONE, NONE, NONE, NONE},
+	[0x01] = {PCIE1, PCIE2, SGMII_TSEC2, SGMII_TSEC3},
+	[0x02] = {PCIE1, SGMII_TSEC1, SGMII_TSEC2, SGMII_TSEC3},
+	[0x03] = {NONE, SGMII_TSEC1, SGMII_TSEC2, SGMII_TSEC3},
+};
+
+static const u8 serdes2_cfg_tbl[][SRDS2_MAX_LANES] = {
+	[0x00] = {NONE, NONE},
+	[0x01] = {SATA1, SATA2},
+	[0x02] = {SATA1, SATA2},
+	[0x03] = {PCIE1, PCIE2},
+};
+
+
+int is_serdes_configured(enum srds_prtcl device)
+{
+	int ret = (1 << device) & serdes1_prtcl_map;
+
+	if (ret)
+		return ret;
+
+	return (1 << device) & serdes2_prtcl_map;
+}
+
+void fsl_serdes_init(void)
+{
+	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+	u32 pordevsr = in_be32(&gur->pordevsr);
+	u32 srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >>
+				MPC85xx_PORDEVSR_IO_SEL_SHIFT;
+	int lane;
+
+	debug("PORDEVSR[IO_SEL_SRDS] = %x\n", srds_cfg);
+
+	if (srds_cfg > ARRAY_SIZE(serdes1_cfg_tbl)) {
+		printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg);
+		return;
+	}
+	for (lane = 0; lane < SRDS1_MAX_LANES; lane++) {
+		enum srds_prtcl lane_prtcl = serdes1_cfg_tbl[srds_cfg][lane];
+		serdes1_prtcl_map |= (1 << lane_prtcl);
+	}
+
+	if (srds_cfg > ARRAY_SIZE(serdes2_cfg_tbl)) {
+		printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg);
+		return;
+	}
+
+	for (lane = 0; lane < SRDS2_MAX_LANES; lane++) {
+		enum srds_prtcl lane_prtcl = serdes2_cfg_tbl[srds_cfg][lane];
+		serdes2_prtcl_map |= (1 << lane_prtcl);
+	}
+}
diff --git a/arch/powerpc/cpu/mpc85xx/p1023_serdes.c b/arch/powerpc/cpu/mpc85xx/p1023_serdes.c
new file mode 100644
index 0000000000..c8ab5d6f33
--- /dev/null
+++ b/arch/powerpc/cpu/mpc85xx/p1023_serdes.c
@@ -0,0 +1,53 @@
+/*
+ * Copyright 2010-2011 Freescale Semiconductor, Inc.
+ * Author: Roy Zang <tie-fei.zang@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <config.h>
+#include <common.h>
+#include <asm/io.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_serdes.h>
+
+#define SRDS1_MAX_LANES		4
+
+static u32 serdes1_prtcl_map;
+
+static const u8 serdes1_cfg_tbl[][SRDS1_MAX_LANES] = {
+	[0x00] = {PCIE1, PCIE2, NONE, NONE},
+	[0x01] = {PCIE1, PCIE2, PCIE3, NONE},
+	[0x02] = {PCIE1, PCIE2, PCIE3, SGMII_FM1_DTSEC2},
+	[0x03] = {PCIE1, PCIE2, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2},
+};
+
+int is_serdes_configured(enum srds_prtcl device)
+{
+	int ret = (1 << device) & serdes1_prtcl_map;
+	return ret;
+}
+
+void fsl_serdes_init(void)
+{
+	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+	u32 pordevsr = in_be32(&gur->pordevsr);
+	u32 srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >>
+				MPC85xx_PORDEVSR_IO_SEL_SHIFT;
+	int lane;
+
+	debug("PORDEVSR[IO_SEL_SRDS] = %x\n", srds_cfg);
+
+	if (srds_cfg > ARRAY_SIZE(serdes1_cfg_tbl)) {
+		printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg);
+		return;
+	}
+	for (lane = 0; lane < SRDS1_MAX_LANES; lane++) {
+		enum srds_prtcl lane_prtcl = serdes1_cfg_tbl[srds_cfg][lane];
+		serdes1_prtcl_map |= (1 << lane_prtcl);
+	}
+
+}
diff --git a/arch/powerpc/cpu/mpc85xx/p3041_ids.c b/arch/powerpc/cpu/mpc85xx/p3041_ids.c
index febbee95ba..1255898483 100644
--- a/arch/powerpc/cpu/mpc85xx/p3041_ids.c
+++ b/arch/powerpc/cpu/mpc85xx/p3041_ids.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2010 Freescale Semiconductor, Inc.
+ * Copyright 2010-2011 Freescale Semiconductor, Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -52,10 +52,10 @@ struct liodn_id_table liodn_tbl[] = {
 	SET_SATA_LIODN(1, 127),
 	SET_SATA_LIODN(2, 128),
 
-	SET_PCI_LIODN(1, 193),
-	SET_PCI_LIODN(2, 194),
-	SET_PCI_LIODN(3, 195),
-	SET_PCI_LIODN(4, 196),
+	SET_PCI_LIODN("fsl,qoriq-pcie-v2.2", 1, 193),
+	SET_PCI_LIODN("fsl,qoriq-pcie-v2.2", 2, 194),
+	SET_PCI_LIODN("fsl,qoriq-pcie-v2.2", 3, 195),
+	SET_PCI_LIODN("fsl,qoriq-pcie-v2.2", 4, 196),
 
 	SET_DMA_LIODN(1, 197),
 	SET_DMA_LIODN(2, 198),
diff --git a/arch/powerpc/cpu/mpc85xx/p4080_ids.c b/arch/powerpc/cpu/mpc85xx/p4080_ids.c
index df2504802a..fd155c89e0 100644
--- a/arch/powerpc/cpu/mpc85xx/p4080_ids.c
+++ b/arch/powerpc/cpu/mpc85xx/p4080_ids.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2010 Freescale Semiconductor, Inc.
+ * Copyright 2010-2011 Freescale Semiconductor, Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -44,9 +44,9 @@ struct liodn_id_table liodn_tbl[] = {
 
 	SET_SDHC_LIODN(1, 156),
 
-	SET_PCI_LIODN(1, 193),
-	SET_PCI_LIODN(2, 194),
-	SET_PCI_LIODN(3, 195),
+	SET_PCI_LIODN("fsl,p4080-pcie", 1, 193),
+	SET_PCI_LIODN("fsl,p4080-pcie", 2, 194),
+	SET_PCI_LIODN("fsl,p4080-pcie", 3, 195),
 
 	SET_DMA_LIODN(1, 196),
 	SET_DMA_LIODN(2, 197),
diff --git a/arch/powerpc/cpu/mpc85xx/p5020_ids.c b/arch/powerpc/cpu/mpc85xx/p5020_ids.c
index febbee95ba..1255898483 100644
--- a/arch/powerpc/cpu/mpc85xx/p5020_ids.c
+++ b/arch/powerpc/cpu/mpc85xx/p5020_ids.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2010 Freescale Semiconductor, Inc.
+ * Copyright 2010-2011 Freescale Semiconductor, Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -52,10 +52,10 @@ struct liodn_id_table liodn_tbl[] = {
 	SET_SATA_LIODN(1, 127),
 	SET_SATA_LIODN(2, 128),
 
-	SET_PCI_LIODN(1, 193),
-	SET_PCI_LIODN(2, 194),
-	SET_PCI_LIODN(3, 195),
-	SET_PCI_LIODN(4, 196),
+	SET_PCI_LIODN("fsl,qoriq-pcie-v2.2", 1, 193),
+	SET_PCI_LIODN("fsl,qoriq-pcie-v2.2", 2, 194),
+	SET_PCI_LIODN("fsl,qoriq-pcie-v2.2", 3, 195),
+	SET_PCI_LIODN("fsl,qoriq-pcie-v2.2", 4, 196),
 
 	SET_DMA_LIODN(1, 197),
 	SET_DMA_LIODN(2, 198),
diff --git a/arch/powerpc/cpu/mpc85xx/portals.c b/arch/powerpc/cpu/mpc85xx/portals.c
index 01aec6e794..e8d53bb2fd 100644
--- a/arch/powerpc/cpu/mpc85xx/portals.c
+++ b/arch/powerpc/cpu/mpc85xx/portals.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2008-2010 Freescale Semiconductor, Inc.
+ * Copyright 2008-2011 Freescale Semiconductor, Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -30,18 +30,13 @@
 #include <asm/fsl_portals.h>
 #include <asm/fsl_liodn.h>
 
-static ccsr_qman_t *qman = (void *)CONFIG_SYS_FSL_CORENET_QMAN_ADDR;
+static ccsr_qman_t *qman = (void *)CONFIG_SYS_FSL_QMAN_ADDR;
 
 void setup_portals(void)
 {
+#ifdef CONFIG_FSL_CORENET
 	int i;
 
-	/* Set the Qman initiator BAR to match the LAW (for DQRR stashing) */
-#ifdef CONFIG_PHYS_64BIT
-	out_be32(&qman->qcsp_bare, (u32)(CONFIG_SYS_QMAN_MEM_PHYS >> 32));
-#endif
-	out_be32(&qman->qcsp_bar, (u32)CONFIG_SYS_QMAN_MEM_PHYS);
-
 	for (i = 0; i < CONFIG_SYS_QMAN_NUM_PORTALS; i++) {
 		u8 sdest = qp_info[i].sdest;
 		u16 fliodn = qp_info[i].fliodn;
@@ -53,6 +48,13 @@ void setup_portals(void)
 		/* set frame liodn */
 		out_be32(&qman->qcsp[i].qcsp_io_cfg, (sdest << 16) | fliodn);
 	}
+#endif
+
+	/* Set the Qman initiator BAR to match the LAW (for DQRR stashing) */
+#ifdef CONFIG_PHYS_64BIT
+	out_be32(&qman->qcsp_bare, (u32)(CONFIG_SYS_QMAN_MEM_PHYS >> 32));
+#endif
+	out_be32(&qman->qcsp_bar, (u32)CONFIG_SYS_QMAN_MEM_PHYS);
 }
 
 /* Update portal containter to match LAW setup of portal in phy map */
@@ -118,9 +120,12 @@ void fdt_portal(void *blob, const char *compat, const char *container,
 static int fdt_qportal(void *blob, int off, int id, char *name,
 		       enum fsl_dpaa_dev dev, int create)
 {
-	int childoff, dev_off, num, ret = 0;
+	int childoff, dev_off, ret = 0;
 	uint32_t dev_handle;
+#ifdef CONFIG_FSL_CORENET
+	int num;
 	u32 liodns[2];
+#endif
 
 	childoff = fdt_subnode_offset(blob, off, name);
 	if (create) {
@@ -154,9 +159,11 @@ static int fdt_qportal(void *blob, int off, int id, char *name,
 			if (ret < 0)
 				return ret;
 
+#ifdef CONFIG_FSL_CORENET
 			num = get_dpaa_liodn(dev, &liodns[0], id);
 			ret = fdt_setprop(blob, childoff, "fsl,liodn",
 					  &liodns[0], sizeof(u32) * num);
+#endif
 		} else {
 			return childoff;
 		}
@@ -184,7 +191,9 @@ void fdt_fixup_qportals(void *blob)
 
 	off = fdt_node_offset_by_compatible(blob, -1, "fsl,qman-portal");
 	while (off != -FDT_ERR_NOTFOUND) {
+#ifdef CONFIG_FSL_CORENET
 		u32 liodns[2];
+#endif
 		const int *ci = fdt_getprop(blob, off, "cell-index", NULL);
 		int j, i = *ci;
 
@@ -192,6 +201,7 @@ void fdt_fixup_qportals(void *blob)
 		if (err < 0)
 			goto err;
 
+#ifdef CONFIG_FSL_CORENET
 		liodns[0] = qp_info[i].dliodn;
 		liodns[1] = qp_info[i].fliodn;
 
@@ -199,6 +209,7 @@ void fdt_fixup_qportals(void *blob)
 				  &liodns, sizeof(u32) * 2);
 		if (err < 0)
 			goto err;
+#endif
 
 		i++;
 
@@ -207,6 +218,7 @@ void fdt_fixup_qportals(void *blob)
 		if (err < 0)
 			goto err;
 
+#ifdef CONFIG_FSL_CORENET
 #ifdef CONFIG_SYS_DPAA_PME
 		err = fdt_qportal(blob, off, i, "pme@0", FSL_HW_PORTAL_PME, 1);
 		if (err < 0)
@@ -214,6 +226,8 @@ void fdt_fixup_qportals(void *blob)
 #else
 		fdt_qportal(blob, off, i, "pme@0", FSL_HW_PORTAL_PME, 0);
 #endif
+#endif
+
 #ifdef CONFIG_SYS_DPAA_FMAN
 		for (j = 0; j < CONFIG_SYS_NUM_FMAN; j++) {
 			char name[] = "fman@0";
diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c
index f2aa8d039d..e530494102 100644
--- a/arch/powerpc/cpu/mpc85xx/speed.c
+++ b/arch/powerpc/cpu/mpc85xx/speed.c
@@ -107,25 +107,45 @@ void get_sys_info (sys_info_t * sysInfo)
 #define PME_CLK_SEL	0x80000000
 #define FM1_CLK_SEL	0x40000000
 #define FM2_CLK_SEL	0x20000000
+#define HWA_ASYNC_DIV	0x04000000
+#if (CONFIG_SYS_FSL_NUM_CC_PLLS == 2)
+#define HWA_CC_PLL	1
+#elif (CONFIG_SYS_FSL_NUM_CC_PLLS == 4)
+#define HWA_CC_PLL	2	
+#else
+#error CONFIG_SYS_FSL_NUM_CC_PLLS not set or unknown case
+#endif
 	rcw_tmp = in_be32(&gur->rcwsr[7]);
 
 #ifdef CONFIG_SYS_DPAA_PME
-	if (rcw_tmp & PME_CLK_SEL)
-		sysInfo->freqPME = freqCC_PLL[2] / 2;
-	else
+	if (rcw_tmp & PME_CLK_SEL) {
+		if (rcw_tmp & HWA_ASYNC_DIV)
+			sysInfo->freqPME = freqCC_PLL[HWA_CC_PLL] / 4;
+		else
+			sysInfo->freqPME = freqCC_PLL[HWA_CC_PLL] / 2;
+	} else {
 		sysInfo->freqPME = sysInfo->freqSystemBus / 2;
+	}
 #endif
 
 #ifdef CONFIG_SYS_DPAA_FMAN
-	if (rcw_tmp & FM1_CLK_SEL)
-		sysInfo->freqFMan[0] = freqCC_PLL[2] / 2;
-	else
+	if (rcw_tmp & FM1_CLK_SEL) {
+		if (rcw_tmp & HWA_ASYNC_DIV)
+			sysInfo->freqFMan[0] = freqCC_PLL[HWA_CC_PLL] / 4;
+		else
+			sysInfo->freqFMan[0] = freqCC_PLL[HWA_CC_PLL] / 2;
+	} else {
 		sysInfo->freqFMan[0] = sysInfo->freqSystemBus / 2;
+	}
 #if (CONFIG_SYS_NUM_FMAN) == 2
-	if (rcw_tmp & FM2_CLK_SEL)
-		sysInfo->freqFMan[1] = freqCC_PLL[2] / 2;
-	else
+	if (rcw_tmp & FM2_CLK_SEL) {
+		if (rcw_tmp & HWA_ASYNC_DIV)
+			sysInfo->freqFMan[1] = freqCC_PLL[HWA_CC_PLL] / 4;
+		else
+			sysInfo->freqFMan[1] = freqCC_PLL[HWA_CC_PLL] / 2;
+	} else {
 		sysInfo->freqFMan[1] = sysInfo->freqSystemBus / 2;
+	}
 #endif
 #endif
 
@@ -162,7 +182,6 @@ void get_sys_info (sys_info_t * sysInfo)
 			sysInfo->freqDDRBus = ddr_ratio * CONFIG_DDR_CLK_FREQ;
 	}
 #endif
-#endif
 
 #ifdef CONFIG_QE
 	qe_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_QE_RATIO)
@@ -170,6 +189,12 @@ void get_sys_info (sys_info_t * sysInfo)
 	sysInfo->freqQE = qe_ratio * CONFIG_SYS_CLK_FREQ;
 #endif
 
+#ifdef CONFIG_SYS_DPAA_FMAN
+		sysInfo->freqFMan[0] = sysInfo->freqSystemBus;
+#endif
+
+#endif /* CONFIG_FSL_CORENET */
+
 #if defined(CONFIG_FSL_LBC)
 #if defined(CONFIG_SYS_LBC_LCRR)
 	/* We will program LCRR to this value later */
@@ -254,7 +279,8 @@ int get_clocks (void)
 	gd->i2c2_clk = gd->i2c1_clk;
 
 #if defined(CONFIG_FSL_ESDHC)
-#ifdef CONFIG_MPC8569
+#if defined(CONFIG_MPC8569) || defined(CONFIG_P1010) ||\
+       defined(CONFIG_P1014)
 	gd->sdhc_clk = gd->bus_clk;
 #else
 	gd->sdhc_clk = gd->bus_clk / 2;
diff --git a/arch/powerpc/cpu/mpc85xx/tlb.c b/arch/powerpc/cpu/mpc85xx/tlb.c
index 31143ba530..295f175bba 100644
--- a/arch/powerpc/cpu/mpc85xx/tlb.c
+++ b/arch/powerpc/cpu/mpc85xx/tlb.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2008-2009 Freescale Semiconductor, Inc.
+ * Copyright 2008-2011 Freescale Semiconductor, Inc.
  *
  * (C) Copyright 2000
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -55,6 +55,7 @@ void init_tlbs(void)
 	return ;
 }
 
+#ifndef CONFIG_NAND_SPL
 void read_tlbcam_entry(int idx, u32 *valid, u32 *tsize, unsigned long *epn,
 		       phys_addr_t *rpn)
 {
@@ -73,7 +74,6 @@ void read_tlbcam_entry(int idx, u32 *valid, u32 *tsize, unsigned long *epn,
 #endif
 }
 
-#ifndef CONFIG_NAND_SPL
 void print_tlbcam(void)
 {
 	int i;
diff --git a/arch/powerpc/cpu/mpc8xxx/Makefile b/arch/powerpc/cpu/mpc8xxx/Makefile
index 5dfd65b882..4ae26e4210 100644
--- a/arch/powerpc/cpu/mpc8xxx/Makefile
+++ b/arch/powerpc/cpu/mpc8xxx/Makefile
@@ -15,6 +15,7 @@ COBJS-y	+= cpu.o
 endif
 
 COBJS-$(CONFIG_OF_LIBFDT) += fdt.o
+COBJS-$(CONFIG_FSL_IFC) += fsl_ifc.o
 COBJS-$(CONFIG_FSL_LBC) += fsl_lbc.o
 COBJS-$(CONFIG_SYS_SRIO) += srio.o
 
diff --git a/arch/powerpc/cpu/mpc8xxx/cpu.c b/arch/powerpc/cpu/mpc8xxx/cpu.c
index 4335fb4f31..39b304ae99 100644
--- a/arch/powerpc/cpu/mpc8xxx/cpu.c
+++ b/arch/powerpc/cpu/mpc8xxx/cpu.c
@@ -71,15 +71,27 @@ struct cpu_type cpu_type_list [] = {
 	CPU_TYPE_ENTRY(P1012, P1012, 1),
 	CPU_TYPE_ENTRY(P1012, P1012_E, 1),
 	CPU_TYPE_ENTRY(P1013, P1013, 1),
+	CPU_TYPE_ENTRY(P1013, P1013_E, 1),
 	CPU_TYPE_ENTRY(P1014, P1014_E, 1),
 	CPU_TYPE_ENTRY(P1014, P1014, 1),
-	CPU_TYPE_ENTRY(P1013, P1013_E, 1),
+	CPU_TYPE_ENTRY(P1015, P1015_E, 1),
+	CPU_TYPE_ENTRY(P1015, P1015, 1),
+	CPU_TYPE_ENTRY(P1016, P1016_E, 1),
+	CPU_TYPE_ENTRY(P1016, P1016, 1),
+	CPU_TYPE_ENTRY(P1017, P1017, 1),
+	CPU_TYPE_ENTRY(P1017, P1017, 1),
 	CPU_TYPE_ENTRY(P1020, P1020, 2),
 	CPU_TYPE_ENTRY(P1020, P1020_E, 2),
 	CPU_TYPE_ENTRY(P1021, P1021, 2),
 	CPU_TYPE_ENTRY(P1021, P1021_E, 2),
 	CPU_TYPE_ENTRY(P1022, P1022, 2),
 	CPU_TYPE_ENTRY(P1022, P1022_E, 2),
+	CPU_TYPE_ENTRY(P1023, P1023, 2),
+	CPU_TYPE_ENTRY(P1023, P1023_E, 2),
+	CPU_TYPE_ENTRY(P1024, P1024, 2),
+	CPU_TYPE_ENTRY(P1024, P1024_E, 2),
+	CPU_TYPE_ENTRY(P1025, P1025, 2),
+	CPU_TYPE_ENTRY(P1025, P1025_E, 2),
 	CPU_TYPE_ENTRY(P2010, P2010, 1),
 	CPU_TYPE_ENTRY(P2010, P2010_E, 1),
 	CPU_TYPE_ENTRY(P2020, P2020, 2),
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c
index cefabe769f..02d069c9ec 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c
@@ -236,7 +236,7 @@ static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr,
 	 * tAXPD=1, need design to confirm.
 	 */
 	int tXP = max((get_memory_clk_period_ps() * 3), 7500); /* unit=ps */
-	unsigned int data_rate = fsl_ddr_get_mem_data_rate();
+	unsigned int data_rate = get_ddr_freq(0);
 	tmrd_mclk = 4;
 	/* set the turnaround time */
 	trwt_mclk = 1;
@@ -1305,7 +1305,7 @@ static void set_ddr_eor(fsl_ddr_cfg_regs_t *ddr, const memctl_options_t *popts)
 {
 	if (popts->addr_hash) {
 		ddr->ddr_eor = 0x40000000;	/* address hash enable */
-		puts("Addess hashing enabled.\n");
+		puts("Address hashing enabled.\n");
 	}
 }
 
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ddr.h b/arch/powerpc/cpu/mpc8xxx/ddr/ddr.h
index c7c12c1c2f..1e866fe035 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/ddr.h
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/ddr.h
@@ -80,5 +80,4 @@ extern void check_interleaving_options(fsl_ddr_info_t *pinfo);
 extern unsigned int mclk_to_picos(unsigned int mclk);
 extern unsigned int get_memory_clk_period_ps(void);
 extern unsigned int picos_to_mclk(unsigned int picos);
-extern unsigned int fsl_ddr_get_mem_data_rate(void);
 #endif
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ddr2_dimm_params.c b/arch/powerpc/cpu/mpc8xxx/ddr/ddr2_dimm_params.c
index dcb37cea1f..b565e338ad 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/ddr2_dimm_params.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/ddr2_dimm_params.c
@@ -250,24 +250,27 @@ ddr_compute_dimm_parameters(const ddr2_spd_eeprom_t *spd,
 	pdimm->primary_sdram_width = spd->primw;
 	pdimm->ec_sdram_width = spd->ecw;
 
-	/* FIXME: what about registered SO-DIMM? */
+	/* These are all the types defined by the JEDEC DDR2 SPD 1.3 spec */
 	switch (spd->dimm_type) {
-	case 0x01:	/* RDIMM */
-	case 0x10:	/* Mini-RDIMM */
-		pdimm->registered_dimm = 1; /* register buffered */
+	case DDR2_SPD_DIMMTYPE_RDIMM:
+	case DDR2_SPD_DIMMTYPE_72B_SO_RDIMM:
+	case DDR2_SPD_DIMMTYPE_MINI_RDIMM:
+		/* Registered/buffered DIMMs */
+		pdimm->registered_dimm = 1;
 		break;
 
-	case 0x02:	/* UDIMM */
-	case 0x04:	/* SO-DIMM */
-	case 0x08:	/* Micro-DIMM */
-	case 0x20:	/* Mini-UDIMM */
-		pdimm->registered_dimm = 0;	/* unbuffered */
+	case DDR2_SPD_DIMMTYPE_UDIMM:
+	case DDR2_SPD_DIMMTYPE_SO_DIMM:
+	case DDR2_SPD_DIMMTYPE_MICRO_DIMM:
+	case DDR2_SPD_DIMMTYPE_MINI_UDIMM:
+		/* Unbuffered DIMMs */
+		pdimm->registered_dimm = 0;
 		break;
 
+	case DDR2_SPD_DIMMTYPE_72B_SO_CDIMM:
 	default:
 		printf("unknown dimm_type 0x%02X\n", spd->dimm_type);
 		return 1;
-		break;
 	}
 
 	/* SDRAM device parameters */
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c b/arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c
index 29cea53266..756b15f7ab 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/ddr3_dimm_params.c
@@ -128,24 +128,32 @@ ddr_compute_dimm_parameters(const ddr3_spd_eeprom_t *spd,
 	pdimm->data_width = pdimm->primary_sdram_width
 			  + pdimm->ec_sdram_width;
 
-	switch (spd->module_type & 0xf) {
-	case 0x01:	/* RDIMM */
-	case 0x05:	/* Mini-RDIMM */
-		pdimm->registered_dimm = 1; /* register buffered */
+	/* These are the types defined by the JEDEC DDR3 SPD spec */
+	pdimm->mirrored_dimm = 0;
+	pdimm->registered_dimm = 0;
+	switch (spd->module_type & DDR3_SPD_MODULETYPE_MASK) {
+	case DDR3_SPD_MODULETYPE_RDIMM:
+	case DDR3_SPD_MODULETYPE_MINI_RDIMM:
+		/* Registered/buffered DIMMs */
+		pdimm->registered_dimm = 1;
 		for (i = 0; i < 16; i += 2) {
-			pdimm->rcw[i] = spd->mod_section.registered.rcw[i/2] & 0x0F;
-			pdimm->rcw[i+1] = (spd->mod_section.registered.rcw[i/2] >> 4) & 0x0F;
+			u8 rcw = spd->mod_section.registered.rcw[i/2];
+			pdimm->rcw[i]   = (rcw >> 0) & 0x0F;
+			pdimm->rcw[i+1] = (rcw >> 4) & 0x0F;
 		}
 		break;
-	case 0x02:	/* UDIMM */
-	case 0x03:	/* SO-DIMM */
-	case 0x04:	/* Micro-DIMM */
-	case 0x06:	/* Mini-UDIMM */
-		pdimm->registered_dimm = 0;	/* unbuffered */
+
+	case DDR3_SPD_MODULETYPE_UDIMM:
+	case DDR3_SPD_MODULETYPE_SO_DIMM:
+	case DDR3_SPD_MODULETYPE_MICRO_DIMM:
+	case DDR3_SPD_MODULETYPE_MINI_UDIMM:
+		/* Unbuffered DIMMs */
+		if (spd->mod_section.unbuffered.addr_mapping & 0x1)
+			pdimm->mirrored_dimm = 1;
 		break;
 
 	default:
-		printf("unknown dimm_type 0x%02X\n", spd->module_type);
+		printf("unknown module_type 0x%02X\n", spd->module_type);
 		return 1;
 	}
 
@@ -303,16 +311,5 @@ ddr_compute_dimm_parameters(const ddr3_spd_eeprom_t *spd,
 	pdimm->tFAW_ps = (((spd->tFAW_msb & 0xf) << 8) | spd->tFAW_min)
 			* mtb_ps;
 
-	/*
-	 * We need check the address mirror for unbuffered DIMM
-	 * If SPD indicate the address map mirror, The DDR controller
-	 * need care it.
-	 */
-	if ((spd->module_type == SPD_MODULETYPE_UDIMM) ||
-	    (spd->module_type == SPD_MODULETYPE_SODIMM) ||
-	    (spd->module_type == SPD_MODULETYPE_MICRODIMM) ||
-	    (spd->module_type == SPD_MODULETYPE_MINIUDIMM))
-		pdimm->mirrored_dimm = spd->mod_section.unbuffered.addr_mapping & 0x1;
-
 	return 0;
 }
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c b/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c
index 8b31ec0cfa..00f3d6c600 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c
@@ -207,10 +207,15 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params,
 	temp1 = temp2 = 0;
 	for (i = 0; i < number_of_dimms; i++) {
 		if (dimm_params[i].n_ranks) {
-			if (dimm_params[i].registered_dimm)
+			if (dimm_params[i].registered_dimm) {
 				temp1 = 1;
-			if (!dimm_params[i].registered_dimm)
+				printf("Detected RDIMM %s\n",
+					dimm_params[i].mpart);
+			} else {
 				temp2 = 1;
+				printf("Detected UDIMM %s\n",
+					dimm_params[i].mpart);
+			}
 		}
 	}
 
@@ -218,10 +223,8 @@ compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params,
 	outpdimm->all_DIMMs_unbuffered = 0;
 	if (temp1 && !temp2) {
 		outpdimm->all_DIMMs_registered = 1;
-		printf("Detected RDIMM(s)\n");
 	} else if (!temp1 && temp2) {
 		outpdimm->all_DIMMs_unbuffered = 1;
-		printf("Detected UDIMM(s)\n");
 	} else {
 		printf("ERROR:  Mix of registered buffered and unbuffered "
 				"DIMMs detected!\n");
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/main.c b/arch/powerpc/cpu/mpc8xxx/ddr/main.c
index bb96d66a9d..c8fa123539 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/main.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/main.c
@@ -13,6 +13,7 @@
  */
 
 #include <common.h>
+#include <i2c.h>
 #include <asm/fsl_ddr_sdram.h>
 
 #include "ddr.h"
@@ -26,9 +27,65 @@ extern void fsl_ddr_set_lawbar(
 extern void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
 				   unsigned int ctrl_num);
 
-/* Board-specific functions defined in each board's ddr.c */
-extern void fsl_ddr_get_spd(generic_spd_eeprom_t *ctrl_dimms_spd,
-			   unsigned int ctrl_num);
+#if defined(SPD_EEPROM_ADDRESS) || \
+    defined(SPD_EEPROM_ADDRESS1) || defined(SPD_EEPROM_ADDRESS2) || \
+    defined(SPD_EEPROM_ADDRESS3) || defined(SPD_EEPROM_ADDRESS4)
+#if (CONFIG_NUM_DDR_CONTROLLERS == 1) && (CONFIG_DIMM_SLOTS_PER_CTLR == 1)
+u8 spd_i2c_addr[CONFIG_NUM_DDR_CONTROLLERS][CONFIG_DIMM_SLOTS_PER_CTLR] = {
+	[0][0] = SPD_EEPROM_ADDRESS,
+};
+#endif
+#if (CONFIG_NUM_DDR_CONTROLLERS == 2) && (CONFIG_DIMM_SLOTS_PER_CTLR == 1)
+u8 spd_i2c_addr[CONFIG_NUM_DDR_CONTROLLERS][CONFIG_DIMM_SLOTS_PER_CTLR] = {
+	[0][0] = SPD_EEPROM_ADDRESS1,	/* controller 1 */
+	[1][0] = SPD_EEPROM_ADDRESS2,	/* controller 2 */
+};
+#endif
+#if (CONFIG_NUM_DDR_CONTROLLERS == 2) && (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
+u8 spd_i2c_addr[CONFIG_NUM_DDR_CONTROLLERS][CONFIG_DIMM_SLOTS_PER_CTLR] = {
+	[0][0] = SPD_EEPROM_ADDRESS1,	/* controller 1 */
+	[0][1] = SPD_EEPROM_ADDRESS2,	/* controller 1 */
+	[1][0] = SPD_EEPROM_ADDRESS3,	/* controller 2 */
+	[1][1] = SPD_EEPROM_ADDRESS4,	/* controller 2 */
+};
+#endif
+
+static void __get_spd(generic_spd_eeprom_t *spd, u8 i2c_address)
+{
+	int ret = i2c_read(i2c_address, 0, 1, (uchar *)spd,
+				sizeof(generic_spd_eeprom_t));
+
+	if (ret) {
+		printf("DDR: failed to read SPD from address %u\n", i2c_address);
+		memset(spd, 0, sizeof(generic_spd_eeprom_t));
+	}
+}
+
+__attribute__((weak, alias("__get_spd")))
+void get_spd(generic_spd_eeprom_t *spd, u8 i2c_address);
+
+void fsl_ddr_get_spd(generic_spd_eeprom_t *ctrl_dimms_spd,
+		      unsigned int ctrl_num)
+{
+	unsigned int i;
+	unsigned int i2c_address = 0;
+
+	if (ctrl_num >= CONFIG_NUM_DDR_CONTROLLERS) {
+		printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num);
+		return;
+	}
+
+	for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) {
+		i2c_address = spd_i2c_addr[ctrl_num][i];
+		get_spd(&(ctrl_dimms_spd[i]), i2c_address);
+	}
+}
+#else
+void fsl_ddr_get_spd(generic_spd_eeprom_t *ctrl_dimms_spd,
+		      unsigned int ctrl_num)
+{
+}
+#endif /* SPD_EEPROM_ADDRESSx */
 
 /*
  * ASSUMPTIONS:
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/util.c b/arch/powerpc/cpu/mpc8xxx/ddr/util.c
index 1e2d921286..02908b4561 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/util.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/util.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2008 Freescale Semiconductor, Inc.
+ * Copyright 2008-2011 Freescale Semiconductor, Inc.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -8,10 +8,16 @@
 
 #include <common.h>
 #include <asm/fsl_law.h>
+#include <div64.h>
 
 #include "ddr.h"
 
-unsigned int fsl_ddr_get_mem_data_rate(void);
+/* To avoid 64-bit full-divides, we factor this here */
+#define ULL_2e12 2000000000000ULL
+#define UL_5pow12 244140625UL
+#define UL_2pow13 (1UL << 13)
+
+#define ULL_8Fs 0xFFFFFFFFULL
 
 /*
  * Round mclk_ps to nearest 10 ps in memory controller code.
@@ -22,35 +28,51 @@ unsigned int fsl_ddr_get_mem_data_rate(void);
  */
 unsigned int get_memory_clk_period_ps(void)
 {
-	unsigned int mclk_ps;
+	unsigned int data_rate = get_ddr_freq(0);
+	unsigned int result;
+
+	/* Round to nearest 10ps, being careful about 64-bit multiply/divide */
+	unsigned long long mclk_ps = ULL_2e12;
+
+	/* Add 5*data_rate, for rounding */
+	mclk_ps += 5*(unsigned long long)data_rate;
 
-	mclk_ps = 2000000000000ULL / fsl_ddr_get_mem_data_rate();
-	/* round to nearest 10 ps */
-	return 10 * ((mclk_ps + 5) / 10);
+	/* Now perform the big divide, the result fits in 32-bits */
+	do_div(mclk_ps, data_rate);
+	result = mclk_ps;
+
+	/* We still need to round to 10ps */
+	return 10 * (result/10);
 }
 
 /* Convert picoseconds into DRAM clock cycles (rounding up if needed). */
 unsigned int picos_to_mclk(unsigned int picos)
 {
-	const unsigned long long ULL_2e12 = 2000000000000ULL;
-	const unsigned long long ULL_8Fs = 0xFFFFFFFFULL;
-	unsigned long long clks;
-	unsigned long long clks_temp;
+	unsigned long long clks, clks_rem;
 
+	/* Short circuit for zero picos */
 	if (!picos)
 		return 0;
 
-	clks = fsl_ddr_get_mem_data_rate() * (unsigned long long) picos;
-	clks_temp = clks;
-	clks = clks / ULL_2e12;
-	if (clks_temp % ULL_2e12) {
+	/* First multiply the time by the data rate (32x32 => 64) */
+	clks = picos * (unsigned long long)get_ddr_freq(0);
+
+	/*
+	 * Now divide by 5^12 and track the 32-bit remainder, then divide
+	 * by 2*(2^12) using shifts (and updating the remainder).
+	 */
+	clks_rem = do_div(clks, UL_5pow12);
+	clks_rem <<= 13;
+	clks_rem |= clks & (UL_2pow13-1);
+	clks >>= 13;
+
+	/* If we had a remainder, then round up */
+	if (clks_rem)
 		clks++;
-	}
 
-	if (clks > ULL_8Fs) {
+	/* Clamp to the maximum representable value */
+	if (clks > ULL_8Fs)
 		clks = ULL_8Fs;
-	}
-
 	return (unsigned int) clks;
 }
 
@@ -141,6 +163,8 @@ void board_add_ram_info(int use_default)
 
 	if (sdram_cfg & SDRAM_CFG_32_BE)
 		puts(", 32-bit");
+	else if (sdram_cfg & SDRAM_CFG_16_BE)
+		puts(", 16-bit");
 	else
 		puts(", 64-bit");
 
diff --git a/arch/powerpc/cpu/mpc8xxx/fsl_ifc.c b/arch/powerpc/cpu/mpc8xxx/fsl_ifc.c
new file mode 100644
index 0000000000..39a455638f
--- /dev/null
+++ b/arch/powerpc/cpu/mpc8xxx/fsl_ifc.c
@@ -0,0 +1,84 @@
+/*
+ * Copyright 2010-2011 Freescale Semiconductor, Inc.
+ * Author: Dipen Dudhat <dipen.dudhat@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_ifc.h>
+
+void print_ifc_regs(void)
+{
+	int i, j;
+
+	printf("IFC Controller Registers\n");
+	for (i = 0; i < FSL_IFC_BANK_COUNT; i++) {
+		printf("CSPR%d:0x%08X\tAMASK%d:0x%08X\tCSOR%d:0x%08X\n",
+			i, get_ifc_cspr(i), i, get_ifc_amask(i),
+			i, get_ifc_csor(i));
+		for (j = 0; j < 4; j++)
+			printf("IFC_FTIM%d:0x%08X\n", j, get_ifc_ftim(i, j));
+	}
+}
+
+void init_early_memctl_regs(void)
+{
+#if defined(CONFIG_SYS_CSPR0) && defined(CONFIG_SYS_CSOR0)
+	set_ifc_cspr(IFC_CS0, CONFIG_SYS_CSPR0);
+	set_ifc_amask(IFC_CS0, CONFIG_SYS_AMASK0);
+	set_ifc_csor(IFC_CS0, CONFIG_SYS_CSOR0);
+
+	set_ifc_ftim(IFC_CS0, IFC_FTIM0, CONFIG_SYS_CS0_FTIM0);
+	set_ifc_ftim(IFC_CS0, IFC_FTIM1, CONFIG_SYS_CS0_FTIM1);
+	set_ifc_ftim(IFC_CS0, IFC_FTIM2, CONFIG_SYS_CS0_FTIM2);
+	set_ifc_ftim(IFC_CS0, IFC_FTIM3, CONFIG_SYS_CS0_FTIM3);
+#endif
+
+#if defined(CONFIG_SYS_CSPR1) && defined(CONFIG_SYS_CSOR1)
+	set_ifc_csor(IFC_CS1, CONFIG_SYS_CSOR1);
+	set_ifc_amask(IFC_CS1, CONFIG_SYS_AMASK1);
+	set_ifc_cspr(IFC_CS1, CONFIG_SYS_CSPR1);
+
+	set_ifc_ftim(IFC_CS1, IFC_FTIM0, CONFIG_SYS_CS1_FTIM0);
+	set_ifc_ftim(IFC_CS1, IFC_FTIM1, CONFIG_SYS_CS1_FTIM1);
+	set_ifc_ftim(IFC_CS1, IFC_FTIM2, CONFIG_SYS_CS1_FTIM2);
+	set_ifc_ftim(IFC_CS1, IFC_FTIM3, CONFIG_SYS_CS1_FTIM3);
+#endif
+
+#if defined(CONFIG_SYS_CSPR2) && defined(CONFIG_SYS_CSOR2)
+	set_ifc_csor(IFC_CS2, CONFIG_SYS_CSOR2);
+	set_ifc_amask(IFC_CS2, CONFIG_SYS_AMASK2);
+	set_ifc_cspr(IFC_CS2, CONFIG_SYS_CSPR2);
+
+	set_ifc_ftim(IFC_CS2, IFC_FTIM0, CONFIG_SYS_CS2_FTIM0);
+	set_ifc_ftim(IFC_CS2, IFC_FTIM1, CONFIG_SYS_CS2_FTIM1);
+	set_ifc_ftim(IFC_CS2, IFC_FTIM2, CONFIG_SYS_CS2_FTIM2);
+	set_ifc_ftim(IFC_CS2, IFC_FTIM3, CONFIG_SYS_CS2_FTIM3);
+
+#endif
+
+#if defined(CONFIG_SYS_CSPR3) && defined(CONFIG_SYS_CSOR3)
+	set_ifc_cspr(IFC_CS3, CONFIG_SYS_CSPR3);
+	set_ifc_amask(IFC_CS3, CONFIG_SYS_AMASK3);
+	set_ifc_csor(IFC_CS3, CONFIG_SYS_CSOR3);
+
+	set_ifc_ftim(IFC_CS3, IFC_FTIM0, CONFIG_SYS_CS3_FTIM0);
+	set_ifc_ftim(IFC_CS3, IFC_FTIM1, CONFIG_SYS_CS3_FTIM1);
+	set_ifc_ftim(IFC_CS3, IFC_FTIM2, CONFIG_SYS_CS3_FTIM2);
+	set_ifc_ftim(IFC_CS3, IFC_FTIM3, CONFIG_SYS_CS3_FTIM3);
+#endif
+}
diff --git a/arch/powerpc/include/asm/config.h b/arch/powerpc/include/asm/config.h
index 2b6b233ba6..536f142331 100644
--- a/arch/powerpc/include/asm/config.h
+++ b/arch/powerpc/include/asm/config.h
@@ -75,8 +75,10 @@
 /* Since so many PPC SOCs have a semi-common LBC, define this here */
 #if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) || \
 	defined(CONFIG_MPC83xx)
+#if !defined(CONFIG_FSL_IFC)
 #define CONFIG_FSL_LBC
 #endif
+#endif
 
 /* All PPC boards must swap IDE bytes */
 #define CONFIG_IDE_SWAP_IO
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index 6c16681b7f..4228161c62 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -67,11 +67,17 @@
 #define CONFIG_MAX_CPUS			1
 #define CONFIG_SYS_FSL_NUM_LAWS		10
 #define CONFIG_SYS_FSL_SEC_COMPAT	2
+#define QE_MURAM_SIZE			0x10000UL
+#define MAX_QE_RISC			2
+#define QE_NUM_OF_SNUM			28
 
 #elif defined(CONFIG_MPC8569)
 #define CONFIG_MAX_CPUS			1
 #define CONFIG_SYS_FSL_NUM_LAWS		10
 #define CONFIG_SYS_FSL_SEC_COMPAT	2
+#define QE_MURAM_SIZE			0x20000UL
+#define MAX_QE_RISC			4
+#define QE_NUM_OF_SNUM			46
 
 #elif defined(CONFIG_MPC8572)
 #define CONFIG_MAX_CPUS			2
@@ -85,21 +91,32 @@
 #define CONFIG_SYS_FSL_NUM_LAWS		12
 #define CONFIG_TSECV2
 #define CONFIG_SYS_FSL_SEC_COMPAT	4
+#define CONFIG_FSL_SATA_V2
+#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
+#define CONFIG_NUM_DDR_CONTROLLERS	1
+#define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000
 
+/* P1011 is single core version of P1020 */
 #elif defined(CONFIG_P1011)
 #define CONFIG_MAX_CPUS			1
 #define CONFIG_SYS_FSL_NUM_LAWS		12
 #define CONFIG_TSECV2
 #define CONFIG_FSL_PCIE_DISABLE_ASPM
 #define CONFIG_SYS_FSL_SEC_COMPAT	2
+#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
+#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
 
+/* P1012 is single core version of P1021 */
 #elif defined(CONFIG_P1012)
 #define CONFIG_MAX_CPUS			1
 #define CONFIG_SYS_FSL_NUM_LAWS		12
 #define CONFIG_TSECV2
 #define CONFIG_FSL_PCIE_DISABLE_ASPM
 #define CONFIG_SYS_FSL_SEC_COMPAT	2
+#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
+#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
 
+/* P1013 is single core version of P1022 */
 #elif defined(CONFIG_P1013)
 #define CONFIG_MAX_CPUS			1
 #define CONFIG_SYS_FSL_NUM_LAWS		12
@@ -114,6 +131,42 @@
 #define CONFIG_SYS_FSL_NUM_LAWS		12
 #define CONFIG_TSECV2
 #define CONFIG_SYS_FSL_SEC_COMPAT	4
+#define CONFIG_FSL_SATA_V2
+#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
+#define CONFIG_NUM_DDR_CONTROLLERS	1
+#define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000
+
+/* P1015 is single core version of P1024 */
+#elif defined(CONFIG_P1015)
+#define CONFIG_MAX_CPUS			1
+#define CONFIG_SYS_FSL_NUM_LAWS		12
+#define CONFIG_TSECV2
+#define CONFIG_FSL_PCIE_DISABLE_ASPM
+#define CONFIG_SYS_FSL_SEC_COMPAT	2
+#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
+#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
+
+/* P1016 is single core version of P1025 */
+#elif defined(CONFIG_P1016)
+#define CONFIG_MAX_CPUS			1
+#define CONFIG_SYS_FSL_NUM_LAWS		12
+#define CONFIG_TSECV2
+#define CONFIG_FSL_PCIE_DISABLE_ASPM
+#define CONFIG_SYS_FSL_SEC_COMPAT	2
+#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
+#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
+
+/* P1017 is single core version of P1023 */
+#elif defined(CONFIG_P1017)
+#define CONFIG_MAX_CPUS			1
+#define CONFIG_SYS_FSL_NUM_LAWS		12
+#define CONFIG_SYS_FSL_SEC_COMPAT	4
+#define CONFIG_SYS_NUM_FMAN		1
+#define CONFIG_SYS_NUM_FM1_DTSEC	2
+#define CONFIG_NUM_DDR_CONTROLLERS	1
+#define CONFIG_SYS_QMAN_NUM_PORTALS	3
+#define CONFIG_SYS_BMAN_NUM_PORTALS	3
+#define CONFIG_SYS_FM_MURAM_SIZE	0x10000
 
 #elif defined(CONFIG_P1020)
 #define CONFIG_MAX_CPUS			2
@@ -121,6 +174,8 @@
 #define CONFIG_TSECV2
 #define CONFIG_FSL_PCIE_DISABLE_ASPM
 #define CONFIG_SYS_FSL_SEC_COMPAT	2
+#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
+#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
 
 #elif defined(CONFIG_P1021)
 #define CONFIG_MAX_CPUS			2
@@ -128,6 +183,8 @@
 #define CONFIG_TSECV2
 #define CONFIG_FSL_PCIE_DISABLE_ASPM
 #define CONFIG_SYS_FSL_SEC_COMPAT	2
+#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
+#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
 
 #elif defined(CONFIG_P1022)
 #define CONFIG_MAX_CPUS			2
@@ -138,6 +195,38 @@
 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
 #define CONFIG_FSL_SATA_ERRATUM_A001
 
+#elif defined(CONFIG_P1023)
+#define CONFIG_MAX_CPUS			2
+#define CONFIG_SYS_FSL_NUM_LAWS		12
+#define CONFIG_SYS_FSL_SEC_COMPAT	4
+#define CONFIG_SYS_NUM_FMAN		1
+#define CONFIG_SYS_NUM_FM1_DTSEC	2
+#define CONFIG_NUM_DDR_CONTROLLERS	1
+#define CONFIG_SYS_QMAN_NUM_PORTALS	3
+#define CONFIG_SYS_BMAN_NUM_PORTALS	3
+#define CONFIG_SYS_FM_MURAM_SIZE	0x10000
+
+/* P1024 is lower end variant of P1020 */
+#elif defined(CONFIG_P1024)
+#define CONFIG_MAX_CPUS			2
+#define CONFIG_SYS_FSL_NUM_LAWS		12
+#define CONFIG_TSECV2
+#define CONFIG_FSL_PCIE_DISABLE_ASPM
+#define CONFIG_SYS_FSL_SEC_COMPAT	2
+#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
+#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
+
+/* P1025 is lower end variant of P1021 */
+#elif defined(CONFIG_P1025)
+#define CONFIG_MAX_CPUS			2
+#define CONFIG_SYS_FSL_NUM_LAWS		12
+#define CONFIG_TSECV2
+#define CONFIG_FSL_PCIE_DISABLE_ASPM
+#define CONFIG_SYS_FSL_SEC_COMPAT	2
+#define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
+#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
+
+/* P2010 is single core version of P2020 */
 #elif defined(CONFIG_P2010)
 #define CONFIG_MAX_CPUS			1
 #define CONFIG_SYS_FSL_NUM_LAWS		12
@@ -154,21 +243,35 @@
 
 #elif defined(CONFIG_PPC_P2040)
 #define CONFIG_MAX_CPUS			4
+#define CONFIG_SYS_FSL_NUM_CC_PLLS	2
 #define CONFIG_SYS_FSL_NUM_LAWS		32
 #define CONFIG_SYS_FSL_SEC_COMPAT	4
+#define CONFIG_SYS_NUM_FMAN		1
+#define CONFIG_SYS_NUM_FM1_DTSEC	5
+#define CONFIG_NUM_DDR_CONTROLLERS	1
+#define CONFIG_SYS_FM_MURAM_SIZE	0x28000
 
 #elif defined(CONFIG_PPC_P3041)
 #define CONFIG_MAX_CPUS			4
+#define CONFIG_SYS_FSL_NUM_CC_PLLS	2
 #define CONFIG_SYS_FSL_NUM_LAWS		32
 #define CONFIG_SYS_FSL_SEC_COMPAT	4
+#define CONFIG_SYS_NUM_FMAN		1
+#define CONFIG_SYS_NUM_FM1_DTSEC	5
+#define CONFIG_SYS_NUM_FM1_10GEC	1
+#define CONFIG_NUM_DDR_CONTROLLERS	1
+#define CONFIG_SYS_FM_MURAM_SIZE	0x28000
 
 #elif defined(CONFIG_PPC_P4040)
 #define CONFIG_MAX_CPUS			4
+#define CONFIG_SYS_FSL_NUM_CC_PLLS	4
 #define CONFIG_SYS_FSL_NUM_LAWS		32
 #define CONFIG_SYS_FSL_SEC_COMPAT	4
+#define CONFIG_SYS_FM_MURAM_SIZE	0x28000
 
 #elif defined(CONFIG_PPC_P4080)
 #define CONFIG_MAX_CPUS			8
+#define CONFIG_SYS_FSL_NUM_CC_PLLS	4
 #define CONFIG_SYS_FSL_NUM_LAWS		32
 #define CONFIG_SYS_FSL_SEC_COMPAT	4
 #define CONFIG_SYS_NUM_FMAN		2
@@ -177,6 +280,7 @@
 #define CONFIG_SYS_NUM_FM1_10GEC	1
 #define CONFIG_SYS_NUM_FM2_10GEC	1
 #define CONFIG_NUM_DDR_CONTROLLERS	2
+#define CONFIG_SYS_FM_MURAM_SIZE	0x28000
 #define CONFIG_SYS_FSL_ERRATUM_CPC_A002
 #define CONFIG_SYS_FSL_ERRATUM_CPC_A003
 #define CONFIG_SYS_FSL_ERRATUM_DDR_A003
@@ -187,15 +291,28 @@
 #define CONFIG_SYS_P4080_ERRATUM_CPU22
 #define CONFIG_SYS_P4080_ERRATUM_SERDES8
 
+/* P5010 is single core version of P5020 */
 #elif defined(CONFIG_PPC_P5010)
 #define CONFIG_MAX_CPUS			1
+#define CONFIG_SYS_FSL_NUM_CC_PLLS	2
 #define CONFIG_SYS_FSL_NUM_LAWS		32
 #define CONFIG_SYS_FSL_SEC_COMPAT	4
+#define CONFIG_SYS_NUM_FMAN		1
+#define CONFIG_SYS_NUM_FM1_DTSEC	5
+#define CONFIG_SYS_NUM_FM1_10GEC	1
+#define CONFIG_NUM_DDR_CONTROLLERS	1
+#define CONFIG_SYS_FM_MURAM_SIZE	0x28000
 
 #elif defined(CONFIG_PPC_P5020)
 #define CONFIG_MAX_CPUS			2
+#define CONFIG_SYS_FSL_NUM_CC_PLLS	2
 #define CONFIG_SYS_FSL_NUM_LAWS		32
 #define CONFIG_SYS_FSL_SEC_COMPAT	4
+#define CONFIG_SYS_NUM_FMAN		1
+#define CONFIG_SYS_NUM_FM1_DTSEC	5
+#define CONFIG_SYS_NUM_FM1_10GEC	1
+#define CONFIG_NUM_DDR_CONTROLLERS	2
+#define CONFIG_SYS_FM_MURAM_SIZE	0x28000
 
 #else
 #error Processor type not defined for this platform
diff --git a/arch/powerpc/include/asm/fsl_ddr_sdram.h b/arch/powerpc/include/asm/fsl_ddr_sdram.h
index 02a1f5d323..99dddb4f00 100644
--- a/arch/powerpc/include/asm/fsl_ddr_sdram.h
+++ b/arch/powerpc/include/asm/fsl_ddr_sdram.h
@@ -84,6 +84,7 @@ typedef ddr3_spd_eeprom_t generic_spd_eeprom_t;
 #define SDRAM_CFG_SDRAM_TYPE_SHIFT	24
 #define SDRAM_CFG_DYN_PWR		0x00200000
 #define SDRAM_CFG_32_BE			0x00080000
+#define SDRAM_CFG_16_BE			0x00100000
 #define SDRAM_CFG_8_BE			0x00040000
 #define SDRAM_CFG_NCAP			0x00020000
 #define SDRAM_CFG_2T_EN			0x00008000
@@ -271,6 +272,8 @@ typedef struct memctl_options_s {
 
 extern phys_size_t fsl_ddr_sdram(void);
 extern int fsl_use_spd(void);
+extern void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
+					unsigned int ctrl_num);
 
 /*
  * The 85xx boards have a common prototype for fixed_sdram so put the
diff --git a/arch/powerpc/include/asm/fsl_ifc.h b/arch/powerpc/include/asm/fsl_ifc.h
new file mode 100644
index 0000000000..d4d9809055
--- /dev/null
+++ b/arch/powerpc/include/asm/fsl_ifc.h
@@ -0,0 +1,957 @@
+/*
+ * Copyright 2010-2011 Freescale Semiconductor, Inc.
+ * Author: Dipen Dudhat <dipen.dudhat@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ASM_PPC_FSL_IFC_H
+#define __ASM_PPC_FSL_IFC_H
+
+#include <config.h>
+#include <common.h>
+
+/*
+ * CSPR - Chip Select Property Register
+ */
+#define CSPR_BA				0xFFFF0000
+#define CSPR_BA_SHIFT			16
+#define CSPR_PORT_SIZE			0x00000180
+#define CSPR_PORT_SIZE_SHIFT		7
+/* Port Size 8 bit */
+#define CSPR_PORT_SIZE_8		0x00000080
+/* Port Size 16 bit */
+#define CSPR_PORT_SIZE_16		0x00000100
+/* Port Size 32 bit */
+#define CSPR_PORT_SIZE_32		0x00000180
+/* Write Protect */
+#define CSPR_WP				0x00000040
+#define CSPR_WP_SHIFT			6
+/* Machine Select */
+#define CSPR_MSEL			0x00000006
+#define CSPR_MSEL_SHIFT			1
+/* NOR */
+#define CSPR_MSEL_NOR			0x00000000
+/* NAND */
+#define CSPR_MSEL_NAND			0x00000002
+/* GPCM */
+#define CSPR_MSEL_GPCM			0x00000004
+/* Bank Valid */
+#define CSPR_V				0x00000001
+#define CSPR_V_SHIFT			0
+
+/* Convert an address into the right format for the CSPR Registers */
+#define CSPR_PHYS_ADDR(x)		(((uint64_t)x) & 0xffff0000)
+
+/*
+ * Address Mask Register
+ */
+#define IFC_AMASK_MASK			0xFFFF0000
+#define IFC_AMASK_SHIFT			16
+#define IFC_AMASK(n)			(IFC_AMASK_MASK << \
+					(__ilog2(n) - IFC_AMASK_SHIFT))
+
+/*
+ * Chip Select Option Register IFC_NAND Machine
+ */
+/* Enable ECC Encoder */
+#define CSOR_NAND_ECC_ENC_EN		0x80000000
+/* 4 bit correction per 520 Byte sector */
+#define CSOR_NAND_ECC_MODE_4		0x00000000
+/* 8 bit correction per 528 Byte sector */
+#define CSOR_NAND_ECC_MODE_8		0x10000000
+/* Enable ECC Decoder */
+#define CSOR_NAND_ECC_DEC_EN		0x04000000
+/* Row Address Length */
+#define CSOR_NAND_RAL_MASK		0x01800000
+#define CSOR_NAND_RAL_SHIFT		20
+#define CSOR_NAND_RAL_1			0x00000000
+#define CSOR_NAND_RAL_2			0x00800000
+#define CSOR_NAND_RAL_3			0x01000000
+#define CSOR_NAND_RAL_4			0x01800000
+/* Page Size 512b, 2k, 4k */
+#define CSOR_NAND_PGS_MASK		0x00180000
+#define CSOR_NAND_PGS_SHIFT		16
+#define CSOR_NAND_PGS_512		0x00000000
+#define CSOR_NAND_PGS_2K		0x00080000
+#define CSOR_NAND_PGS_4K		0x00100000
+/* Spare region Size */
+#define CSOR_NAND_SPRZ_MASK		0x0000E000
+#define CSOR_NAND_SPRZ_SHIFT		13
+#define CSOR_NAND_SPRZ_16		0x00000000
+#define CSOR_NAND_SPRZ_64		0x00002000
+#define CSOR_NAND_SPRZ_128		0x00004000
+#define CSOR_NAND_SPRZ_210		0x00006000
+#define CSOR_NAND_SPRZ_218		0x00008000
+#define CSOR_NAND_SPRZ_224		0x0000A000
+/* Pages Per Block */
+#define CSOR_NAND_PB_MASK		0x00000700
+#define CSOR_NAND_PB_SHIFT		8
+#define CSOR_NAND_PB(n)		((__ilog2(n) - 5) << CSOR_NAND_PB_SHIFT)
+/* Time for Read Enable High to Output High Impedance */
+#define CSOR_NAND_TRHZ_MASK		0x0000001C
+#define CSOR_NAND_TRHZ_SHIFT		2
+#define CSOR_NAND_TRHZ_20		0x00000000
+#define CSOR_NAND_TRHZ_40		0x00000004
+#define CSOR_NAND_TRHZ_60		0x00000008
+#define CSOR_NAND_TRHZ_80		0x0000000C
+#define CSOR_NAND_TRHZ_100		0x00000010
+/* Buffer control disable */
+#define CSOR_NAND_BCTLD			0x00000001
+
+/*
+ * Chip Select Option Register - NOR Flash Mode
+ */
+/* Enable Address shift Mode */
+#define CSOR_NOR_ADM_SHFT_MODE_EN	0x80000000
+/* Page Read Enable from NOR device */
+#define CSOR_NOR_PGRD_EN		0x10000000
+/* AVD Toggle Enable during Burst Program */
+#define CSOR_NOR_AVD_TGL_PGM_EN		0x01000000
+/* Address Data Multiplexing Shift */
+#define CSOR_NOR_ADM_MASK		0x0003E000
+#define CSOR_NOR_ADM_SHIFT_SHIFT	13
+#define CSOR_NOR_ADM_SHIFT(n)	((n) << CSOR_NOR_ADM_SHIFT_SHIFT)
+/* Type of the NOR device hooked */
+#define CSOR_NOR_NOR_MODE_AYSNC_NOR	0x00000000
+#define CSOR_NOR_NOR_MODE_AVD_NOR	0x00000020
+/* Time for Read Enable High to Output High Impedance */
+#define CSOR_NOR_TRHZ_MASK		0x0000001C
+#define CSOR_NOR_TRHZ_SHIFT		2
+#define CSOR_NOR_TRHZ_20		0x00000000
+#define CSOR_NOR_TRHZ_40		0x00000004
+#define CSOR_NOR_TRHZ_60		0x00000008
+#define CSOR_NOR_TRHZ_80		0x0000000C
+#define CSOR_NOR_TRHZ_100		0x00000010
+/* Buffer control disable */
+#define CSOR_NOR_BCTLD			0x00000001
+
+/*
+ * Chip Select Option Register - GPCM Mode
+ */
+/* GPCM Mode - Normal */
+#define CSOR_GPCM_GPMODE_NORMAL		0x00000000
+/* GPCM Mode - GenericASIC */
+#define CSOR_GPCM_GPMODE_ASIC		0x80000000
+/* Parity Mode odd/even */
+#define CSOR_GPCM_PARITY_EVEN		0x40000000
+/* Parity Checking enable/disable */
+#define CSOR_GPCM_PAR_EN		0x20000000
+/* GPCM Timeout Count */
+#define CSOR_GPCM_GPTO_MASK		0x0F000000
+#define CSOR_GPCM_GPTO_SHIFT		24
+#define CSOR_GPCM_GPTO(n)	((__ilog2(n) - 8) << CSOR_GPCM_GPTO_SHIFT)
+/* GPCM External Access Termination mode for read access */
+#define CSOR_GPCM_RGETA_EXT		0x00080000
+/* GPCM External Access Termination mode for write access */
+#define CSOR_GPCM_WGETA_EXT		0x00040000
+/* Address Data Multiplexing Shift */
+#define CSOR_GPCM_ADM_MASK		0x0003E000
+#define CSOR_GPCM_ADM_SHIFT_SHIFT	13
+#define CSOR_GPCM_ADM_SHIFT(n)	((n) << CSOR_GPCM_ADM_SHIFT_SHIFT)
+/* Generic ASIC Parity error indication delay */
+#define CSOR_GPCM_GAPERRD_MASK		0x00000180
+#define CSOR_GPCM_GAPERRD_SHIFT		7
+#define CSOR_GPCM_GAPERRD(n)	(((n) - 1) << CSOR_GPCM_GAPERRD_SHIFT)
+/* Time for Read Enable High to Output High Impedance */
+#define CSOR_GPCM_TRHZ_MASK		0x0000001C
+#define CSOR_GPCM_TRHZ_20		0x00000000
+#define CSOR_GPCM_TRHZ_40		0x00000004
+#define CSOR_GPCM_TRHZ_60		0x00000008
+#define CSOR_GPCM_TRHZ_80		0x0000000C
+#define CSOR_GPCM_TRHZ_100		0x00000010
+/* Buffer control disable */
+#define CSOR_GPCM_BCTLD			0x00000001
+
+/*
+ * Flash Timing Registers (FTIM0 - FTIM2_CSn)
+ */
+/*
+ * FTIM0 - NAND Flash Mode
+ */
+#define FTIM0_NAND			0x7EFF3F3F
+#define FTIM0_NAND_TCCST_SHIFT	25
+#define FTIM0_NAND_TCCST(n)	((n) << FTIM0_NAND_TCCST_SHIFT)
+#define FTIM0_NAND_TWP_SHIFT	16
+#define FTIM0_NAND_TWP(n)	((n) << FTIM0_NAND_TWP_SHIFT)
+#define FTIM0_NAND_TWCHT_SHIFT	8
+#define FTIM0_NAND_TWCHT(n)	((n) << FTIM0_NAND_TWCHT_SHIFT)
+#define FTIM0_NAND_TWH_SHIFT	0
+#define FTIM0_NAND_TWH(n)	((n) << FTIM0_NAND_TWH_SHIFT)
+/*
+ * FTIM1 - NAND Flash Mode
+ */
+#define FTIM1_NAND			0xFFFF3FFF
+#define FTIM1_NAND_TADLE_SHIFT	24
+#define FTIM1_NAND_TADLE(n)	((n) << FTIM1_NAND_TADLE_SHIFT)
+#define FTIM1_NAND_TWBE_SHIFT	16
+#define FTIM1_NAND_TWBE(n)	((n) << FTIM1_NAND_TWBE_SHIFT)
+#define FTIM1_NAND_TRR_SHIFT	8
+#define FTIM1_NAND_TRR(n)	((n) << FTIM1_NAND_TRR_SHIFT)
+#define FTIM1_NAND_TRP_SHIFT	0
+#define FTIM1_NAND_TRP(n)	((n) << FTIM1_NAND_TRP_SHIFT)
+/*
+ * FTIM2 - NAND Flash Mode
+ */
+#define FTIM2_NAND			0x1FE1F8FF
+#define FTIM2_NAND_TRAD_SHIFT	21
+#define FTIM2_NAND_TRAD(n)	((n) << FTIM2_NAND_TRAD_SHIFT)
+#define FTIM2_NAND_TREH_SHIFT	11
+#define FTIM2_NAND_TREH(n)	((n) << FTIM2_NAND_TREH_SHIFT)
+#define FTIM2_NAND_TWHRE_SHIFT	0
+#define FTIM2_NAND_TWHRE(n)	((n) << FTIM2_NAND_TWHRE_SHIFT)
+/*
+ * FTIM3 - NAND Flash Mode
+ */
+#define FTIM3_NAND			0xFF000000
+#define FTIM3_NAND_TWW_SHIFT	24
+#define FTIM3_NAND_TWW(n)	((n) << FTIM3_NAND_TWW_SHIFT)
+
+/*
+ * FTIM0 - NOR Flash Mode
+ */
+#define FTIM0_NOR			0xF03F3F3F
+#define FTIM0_NOR_TACSE_SHIFT	28
+#define FTIM0_NOR_TACSE(n)	((n) << FTIM0_NOR_TACSE_SHIFT)
+#define FTIM0_NOR_TEADC_SHIFT	16
+#define FTIM0_NOR_TEADC(n)	((n) << FTIM0_NOR_TEADC_SHIFT)
+#define FTIM0_NOR_TAVDS_SHIFT	8
+#define FTIM0_NOR_TAVDS(n)	((n) << FTIM0_NOR_TAVDS_SHIFT)
+#define FTIM0_NOR_TEAHC_SHIFT	0
+#define FTIM0_NOR_TEAHC(n)	((n) << FTIM0_NOR_TEAHC_SHIFT)
+/*
+ * FTIM1 - NOR Flash Mode
+ */
+#define FTIM1_NOR			0xFF003F3F
+#define FTIM1_NOR_TACO_SHIFT	24
+#define FTIM1_NOR_TACO(n)	((n) << FTIM1_NOR_TACO_SHIFT)
+#define FTIM1_NOR_TRAD_NOR_SHIFT	8
+#define FTIM1_NOR_TRAD_NOR(n)	((n) << FTIM1_NOR_TRAD_NOR_SHIFT)
+#define FTIM1_NOR_TSEQRAD_NOR_SHIFT	0
+#define FTIM1_NOR_TSEQRAD_NOR(n)	((n) << FTIM1_NOR_TSEQRAD_NOR_SHIFT)
+/*
+ * FTIM2 - NOR Flash Mode
+ */
+#define FTIM2_NOR			0x0F3CFCFF
+#define FTIM2_NOR_TCS_SHIFT		24
+#define FTIM2_NOR_TCS(n)	((n) << FTIM2_NOR_TCS_SHIFT)
+#define FTIM2_NOR_TCH_SHIFT		18
+#define FTIM2_NOR_TCH(n)	((n) << FTIM2_NOR_TCH_SHIFT)
+#define FTIM2_NOR_TWPH_SHIFT	10
+#define FTIM2_NOR_TWPH(n)	((n) << FTIM2_NOR_TWPH_SHIFT)
+#define FTIM2_NOR_TWP_SHIFT		0
+#define FTIM2_NOR_TWP(n)	((n) << FTIM2_NOR_TWP_SHIFT)
+
+/*
+ * FTIM0 - Normal GPCM Mode
+ */
+#define FTIM0_GPCM			0xF03F3F3F
+#define FTIM0_GPCM_TACSE_SHIFT	28
+#define FTIM0_GPCM_TACSE(n)	((n) << FTIM0_GPCM_TACSE_SHIFT)
+#define FTIM0_GPCM_TEADC_SHIFT	16
+#define FTIM0_GPCM_TEADC(n)	((n) << FTIM0_GPCM_TEADC_SHIFT)
+#define FTIM0_GPCM_TAVDS_SHIFT	8
+#define FTIM0_GPCM_TAVDS(n)	((n) << FTIM0_GPCM_TAVDS_SHIFT)
+#define FTIM0_GPCM_TEAHC_SHIFT	0
+#define FTIM0_GPCM_TEAHC(n)	((n) << FTIM0_GPCM_TEAHC_SHIFT)
+/*
+ * FTIM1 - Normal GPCM Mode
+ */
+#define FTIM1_GPCM			0xFF003F00
+#define FTIM1_GPCM_TACO_SHIFT	24
+#define FTIM1_GPCM_TACO(n)	((n) << FTIM1_GPCM_TACO_SHIFT)
+#define FTIM1_GPCM_TRAD_SHIFT	8
+#define FTIM1_GPCM_TRAD(n)	((n) << FTIM1_GPCM_TRAD_SHIFT)
+/*
+ * FTIM2 - Normal GPCM Mode
+ */
+#define FTIM2_GPCM			0x0F3C00FF
+#define FTIM2_GPCM_TCS_SHIFT	24
+#define FTIM2_GPCM_TCS(n)	((n) << FTIM2_GPCM_TCS_SHIFT)
+#define FTIM2_GPCM_TCH_SHIFT	18
+#define FTIM2_GPCM_TCH(n)	((n) << FTIM2_GPCM_TCH_SHIFT)
+#define FTIM2_GPCM_TWP_SHIFT	0
+#define FTIM2_GPCM_TWP(n)	((n) << FTIM2_GPCM_TWP_SHIFT)
+
+/*
+ * Ready Busy Status Register (RB_STAT)
+ */
+/* CSn is READY */
+#define IFC_RB_STAT_READY_CS0		0x80000000
+#define IFC_RB_STAT_READY_CS1		0x40000000
+#define IFC_RB_STAT_READY_CS2		0x20000000
+#define IFC_RB_STAT_READY_CS3		0x10000000
+
+/*
+ * General Control Register (GCR)
+ */
+#define IFC_GCR_MASK			0x8000F800
+/* reset all IFC hardware */
+#define IFC_GCR_SOFT_RST_ALL		0x80000000
+/* Turnaroud Time of external buffer */
+#define IFC_GCR_TBCTL_TRN_TIME		0x0000F800
+#define IFC_GCR_TBCTL_TRN_TIME_SHIFT	11
+
+/*
+ * Common Event and Error Status Register (CM_EVTER_STAT)
+ */
+/* Chip select error */
+#define IFC_CM_EVTER_STAT_CSER		0x80000000
+
+/*
+ * Common Event and Error Enable Register (CM_EVTER_EN)
+ */
+/* Chip select error checking enable */
+#define IFC_CM_EVTER_EN_CSEREN		0x80000000
+
+/*
+ * Common Event and Error Interrupt Enable Register (CM_EVTER_INTR_EN)
+ */
+/* Chip select error interrupt enable */
+#define IFC_CM_EVTER_INTR_EN_CSERIREN	0x80000000
+
+/*
+ * Common Transfer Error Attribute Register-0 (CM_ERATTR0)
+ */
+/* transaction type of error Read/Write */
+#define IFC_CM_ERATTR0_ERTYP_READ	0x80000000
+#define IFC_CM_ERATTR0_ERAID		0x0FF00000
+#define IFC_CM_ERATTR0_ESRCID		0x0000FF00
+
+/*
+ * Clock Control Register (CCR)
+ */
+#define IFC_CCR_MASK			0x0F0F8800
+/* Clock division ratio */
+#define IFC_CCR_CLK_DIV_MASK		0x0F000000
+#define IFC_CCR_CLK_DIV_SHIFT		24
+#define IFC_CCR_CLK_DIV(n)		((n-1) << IFC_CCR_CLK_DIV_SHIFT)
+/* IFC Clock Delay */
+#define IFC_CCR_CLK_DLY_MASK		0x000F0000
+#define IFC_CCR_CLK_DLY_SHIFT		16
+#define IFC_CCR_CLK_DLY(n)		((n) << IFC_CCR_CLK_DLY_SHIFT)
+/* Invert IFC clock before sending out */
+#define IFC_CCR_INV_CLK_EN		0x00008000
+/* Fedback IFC Clock */
+#define IFC_CCR_FB_IFC_CLK_SEL		0x00000800
+
+/*
+ * Clock Status Register (CSR)
+ */
+/* Clk is stable */
+#define IFC_CSR_CLK_STAT_STABLE		0x80000000
+
+/*
+ * IFC_NAND Machine Specific Registers
+ */
+/*
+ * NAND Configuration Register (NCFGR)
+ */
+/* Auto Boot Mode */
+#define IFC_NAND_NCFGR_BOOT		0x80000000
+/* Addressing Mode-ROW0+n/COL0 */
+#define IFC_NAND_NCFGR_ADDR_MODE_RC0	0x00000000
+/* Addressing Mode-ROW0+n/COL0+n */
+#define IFC_NAND_NCFGR_ADDR_MODE_RC1	0x00400000
+/* Number of loop iterations of FIR sequences for multi page operations */
+#define IFC_NAND_NCFGR_NUM_LOOP_MASK	0x0000F000
+#define IFC_NAND_NCFGR_NUM_LOOP_SHIFT	12
+#define IFC_NAND_NCFGR_NUM_LOOP(n)	((n) << IFC_NAND_NCFGR_NUM_LOOP_SHIFT)
+/* Number of wait cycles */
+#define IFC_NAND_NCFGR_NUM_WAIT_MASK	0x000000FF
+#define IFC_NAND_NCFGR_NUM_WAIT_SHIFT	0
+
+/*
+ * NAND Flash Command Registers (NAND_FCR0/NAND_FCR1)
+ */
+/* General purpose FCM flash command bytes CMD0-CMD7 */
+#define IFC_NAND_FCR0_CMD0		0xFF000000
+#define IFC_NAND_FCR0_CMD0_SHIFT	24
+#define IFC_NAND_FCR0_CMD1		0x00FF0000
+#define IFC_NAND_FCR0_CMD1_SHIFT	16
+#define IFC_NAND_FCR0_CMD2		0x0000FF00
+#define IFC_NAND_FCR0_CMD2_SHIFT	8
+#define IFC_NAND_FCR0_CMD3		0x000000FF
+#define IFC_NAND_FCR0_CMD3_SHIFT	0
+#define IFC_NAND_FCR1_CMD4		0xFF000000
+#define IFC_NAND_FCR1_CMD4_SHIFT	24
+#define IFC_NAND_FCR1_CMD5		0x00FF0000
+#define IFC_NAND_FCR1_CMD5_SHIFT	16
+#define IFC_NAND_FCR1_CMD6		0x0000FF00
+#define IFC_NAND_FCR1_CMD6_SHIFT	8
+#define IFC_NAND_FCR1_CMD7		0x000000FF
+#define IFC_NAND_FCR1_CMD7_SHIFT	0
+
+/*
+ * Flash ROW and COL Address Register (ROWn, COLn)
+ */
+/* Main/spare region locator */
+#define IFC_NAND_COL_MS			0x80000000
+/* Column Address */
+#define IFC_NAND_COL_CA_MASK		0x00000FFF
+
+/*
+ * NAND Flash Byte Count Register (NAND_BC)
+ */
+/* Byte Count for read/Write */
+#define IFC_NAND_BC			0x000001FF
+
+/*
+ * NAND Flash Instruction Registers (NAND_FIR0/NAND_FIR1/NAND_FIR2)
+ */
+/* NAND Machine specific opcodes OP0-OP14*/
+#define IFC_NAND_FIR0_OP0		0xFC000000
+#define IFC_NAND_FIR0_OP0_SHIFT		26
+#define IFC_NAND_FIR0_OP1		0x03F00000
+#define IFC_NAND_FIR0_OP1_SHIFT		20
+#define IFC_NAND_FIR0_OP2		0x000FC000
+#define IFC_NAND_FIR0_OP2_SHIFT		14
+#define IFC_NAND_FIR0_OP3		0x00003F00
+#define IFC_NAND_FIR0_OP3_SHIFT		8
+#define IFC_NAND_FIR0_OP4		0x000000FC
+#define IFC_NAND_FIR0_OP4_SHIFT		2
+#define IFC_NAND_FIR1_OP5		0xFC000000
+#define IFC_NAND_FIR1_OP5_SHIFT		26
+#define IFC_NAND_FIR1_OP6		0x03F00000
+#define IFC_NAND_FIR1_OP6_SHIFT		20
+#define IFC_NAND_FIR1_OP7		0x000FC000
+#define IFC_NAND_FIR1_OP7_SHIFT		14
+#define IFC_NAND_FIR1_OP8		0x00003F00
+#define IFC_NAND_FIR1_OP8_SHIFT		8
+#define IFC_NAND_FIR1_OP9		0x000000FC
+#define IFC_NAND_FIR1_OP9_SHIFT		2
+#define IFC_NAND_FIR2_OP10		0xFC000000
+#define IFC_NAND_FIR2_OP10_SHIFT	26
+#define IFC_NAND_FIR2_OP11		0x03F00000
+#define IFC_NAND_FIR2_OP11_SHIFT	20
+#define IFC_NAND_FIR2_OP12		0x000FC000
+#define IFC_NAND_FIR2_OP12_SHIFT	14
+#define IFC_NAND_FIR2_OP13		0x00003F00
+#define IFC_NAND_FIR2_OP13_SHIFT	8
+#define IFC_NAND_FIR2_OP14		0x000000FC
+#define IFC_NAND_FIR2_OP14_SHIFT	2
+
+/*
+ * Instruction opcodes to be programmed
+ * in FIR registers- 6bits
+ */
+enum ifc_nand_fir_opcodes {
+	IFC_FIR_OP_NOP,
+	IFC_FIR_OP_CA0,
+	IFC_FIR_OP_CA1,
+	IFC_FIR_OP_CA2,
+	IFC_FIR_OP_CA3,
+	IFC_FIR_OP_RA0,
+	IFC_FIR_OP_RA1,
+	IFC_FIR_OP_RA2,
+	IFC_FIR_OP_RA3,
+	IFC_FIR_OP_CMD0,
+	IFC_FIR_OP_CMD1,
+	IFC_FIR_OP_CMD2,
+	IFC_FIR_OP_CMD3,
+	IFC_FIR_OP_CMD4,
+	IFC_FIR_OP_CMD5,
+	IFC_FIR_OP_CMD6,
+	IFC_FIR_OP_CMD7,
+	IFC_FIR_OP_CW0,
+	IFC_FIR_OP_CW1,
+	IFC_FIR_OP_CW2,
+	IFC_FIR_OP_CW3,
+	IFC_FIR_OP_CW4,
+	IFC_FIR_OP_CW5,
+	IFC_FIR_OP_CW6,
+	IFC_FIR_OP_CW7,
+	IFC_FIR_OP_WBCD,
+	IFC_FIR_OP_RBCD,
+	IFC_FIR_OP_BTRD,
+	IFC_FIR_OP_RDSTAT,
+	IFC_FIR_OP_NWAIT,
+	IFC_FIR_OP_WFR,
+	IFC_FIR_OP_SBRD,
+	IFC_FIR_OP_UA,
+	IFC_FIR_OP_RB,
+};
+
+/*
+ * NAND Chip Select Register (NAND_CSEL)
+ */
+#define IFC_NAND_CSEL			0x0C000000
+#define IFC_NAND_CSEL_SHIFT		26
+#define IFC_NAND_CSEL_CS0		0x00000000
+#define IFC_NAND_CSEL_CS1		0x04000000
+#define IFC_NAND_CSEL_CS2		0x08000000
+#define IFC_NAND_CSEL_CS3		0x0C000000
+
+/*
+ * NAND Operation Sequence Start (NANDSEQ_STRT)
+ */
+/* NAND Flash Operation Start */
+#define IFC_NAND_SEQ_STRT_FIR_STRT	0x80000000
+/* Automatic Erase */
+#define IFC_NAND_SEQ_STRT_AUTO_ERS	0x00800000
+/* Automatic Program */
+#define IFC_NAND_SEQ_STRT_AUTO_PGM	0x00100000
+/* Automatic Copyback */
+#define IFC_NAND_SEQ_STRT_AUTO_CPB	0x00020000
+/* Automatic Read Operation */
+#define IFC_NAND_SEQ_STRT_AUTO_RD	0x00004000
+/* Automatic Status Read */
+#define IFC_NAND_SEQ_STRT_AUTO_STAT_RD	0x00000800
+
+/*
+ * NAND Event and Error Status Register (NAND_EVTER_STAT)
+ */
+/* Operation Complete */
+#define IFC_NAND_EVTER_STAT_OPC		0x80000000
+/* Flash Timeout Error */
+#define IFC_NAND_EVTER_STAT_FTOER	0x08000000
+/* Write Protect Error */
+#define IFC_NAND_EVTER_STAT_WPER	0x04000000
+/* ECC Error */
+#define IFC_NAND_EVTER_STAT_ECCER	0x02000000
+/* RCW Load Done */
+#define IFC_NAND_EVTER_STAT_RCW_DN	0x00008000
+/* Boot Loadr Done */
+#define IFC_NAND_EVTER_STAT_BOOT_DN	0x00004000
+/* Bad Block Indicator search select */
+#define IFC_NAND_EVTER_STAT_BBI_SRCH_SE	0x00000800
+
+/*
+ * NAND Flash Page Read Completion Event Status Register
+ * (PGRDCMPL_EVT_STAT)
+ */
+#define PGRDCMPL_EVT_STAT_MASK		0xFFFF0000
+/* Small Page 0-15 Done */
+#define PGRDCMPL_EVT_STAT_SECTION_SP(n)	(1 << (31 - (n)))
+/* Large Page(2K) 0-3 Done */
+#define PGRDCMPL_EVT_STAT_LP_2K(n)	(0xF << (28 - (n)*4))
+/* Large Page(4K) 0-1 Done */
+#define PGRDCMPL_EVT_STAT_LP_4K(n)	(0xFF << (24 - (n)*8))
+
+/*
+ * NAND Event and Error Enable Register (NAND_EVTER_EN)
+ */
+/* Operation complete event enable */
+#define IFC_NAND_EVTER_EN_OPC_EN	0x80000000
+/* Page read complete event enable */
+#define IFC_NAND_EVTER_EN_PGRDCMPL_EN	0x20000000
+/* Flash Timeout error enable */
+#define IFC_NAND_EVTER_EN_FTOER_EN	0x08000000
+/* Write Protect error enable */
+#define IFC_NAND_EVTER_EN_WPER_EN	0x04000000
+/* ECC error logging enable */
+#define IFC_NAND_EVTER_EN_ECCER_EN	0x02000000
+
+/*
+ * NAND Event and Error Interrupt Enable Register (NAND_EVTER_INTR_EN)
+ */
+/* Enable interrupt for operation complete */
+#define IFC_NAND_EVTER_INTR_OPCIR_EN		0x80000000
+/* Enable interrupt for Page read complete */
+#define IFC_NAND_EVTER_INTR_PGRDCMPLIR_EN	0x20000000
+/* Enable interrupt for Flash timeout error */
+#define IFC_NAND_EVTER_INTR_FTOERIR_EN		0x08000000
+/* Enable interrupt for Write protect error */
+#define IFC_NAND_EVTER_INTR_WPERIR_EN		0x04000000
+/* Enable interrupt for ECC error*/
+#define IFC_NAND_EVTER_INTR_ECCERIR_EN		0x02000000
+
+/*
+ * NAND Transfer Error Attribute Register-0 (NAND_ERATTR0)
+ */
+#define IFC_NAND_ERATTR0_MASK		0x0C080000
+/* Error on CS0-3 for NAND */
+#define IFC_NAND_ERATTR0_ERCS_CS0	0x00000000
+#define IFC_NAND_ERATTR0_ERCS_CS1	0x04000000
+#define IFC_NAND_ERATTR0_ERCS_CS2	0x08000000
+#define IFC_NAND_ERATTR0_ERCS_CS3	0x0C000000
+/* Transaction type of error Read/Write */
+#define IFC_NAND_ERATTR0_ERTTYPE_READ	0x00080000
+
+/*
+ * NAND Flash Status Register (NAND_FSR)
+ */
+/* First byte of data read from read status op */
+#define IFC_NAND_NFSR_RS0		0xFF000000
+/* Second byte of data read from read status op */
+#define IFC_NAND_NFSR_RS1		0x00FF0000
+
+/*
+ * ECC Error Status Registers (ECCSTAT0-ECCSTAT3)
+ */
+/* Number of ECC errors on sector n (n = 0-15) */
+#define IFC_NAND_ECCSTAT0_ERRCNT_SECTOR0_MASK	0x0F000000
+#define IFC_NAND_ECCSTAT0_ERRCNT_SECTOR0_SHIFT	24
+#define IFC_NAND_ECCSTAT0_ERRCNT_SECTOR1_MASK	0x000F0000
+#define IFC_NAND_ECCSTAT0_ERRCNT_SECTOR1_SHIFT	16
+#define IFC_NAND_ECCSTAT0_ERRCNT_SECTOR2_MASK	0x00000F00
+#define IFC_NAND_ECCSTAT0_ERRCNT_SECTOR2_SHIFT	8
+#define IFC_NAND_ECCSTAT0_ERRCNT_SECTOR3_MASK	0x0000000F
+#define IFC_NAND_ECCSTAT0_ERRCNT_SECTOR3_SHIFT	0
+#define IFC_NAND_ECCSTAT1_ERRCNT_SECTOR4_MASK	0x0F000000
+#define IFC_NAND_ECCSTAT1_ERRCNT_SECTOR4_SHIFT	24
+#define IFC_NAND_ECCSTAT1_ERRCNT_SECTOR5_MASK	0x000F0000
+#define IFC_NAND_ECCSTAT1_ERRCNT_SECTOR5_SHIFT	16
+#define IFC_NAND_ECCSTAT1_ERRCNT_SECTOR6_MASK	0x00000F00
+#define IFC_NAND_ECCSTAT1_ERRCNT_SECTOR6_SHIFT	8
+#define IFC_NAND_ECCSTAT1_ERRCNT_SECTOR7_MASK	0x0000000F
+#define IFC_NAND_ECCSTAT1_ERRCNT_SECTOR7_SHIFT	0
+#define IFC_NAND_ECCSTAT2_ERRCNT_SECTOR8_MASK	0x0F000000
+#define IFC_NAND_ECCSTAT2_ERRCNT_SECTOR8_SHIFT	24
+#define IFC_NAND_ECCSTAT2_ERRCNT_SECTOR9_MASK	0x000F0000
+#define IFC_NAND_ECCSTAT2_ERRCNT_SECTOR9_SHIFT	16
+#define IFC_NAND_ECCSTAT2_ERRCNT_SECTOR10_MASK	0x00000F00
+#define IFC_NAND_ECCSTAT2_ERRCNT_SECTOR10_SHIFT	8
+#define IFC_NAND_ECCSTAT2_ERRCNT_SECTOR11_MASK	0x0000000F
+#define IFC_NAND_ECCSTAT2_ERRCNT_SECTOR11_SHIFT	0
+#define IFC_NAND_ECCSTAT3_ERRCNT_SECTOR12_MASK	0x0F000000
+#define IFC_NAND_ECCSTAT3_ERRCNT_SECTOR12_SHIFT	24
+#define IFC_NAND_ECCSTAT3_ERRCNT_SECTOR13_MASK	0x000F0000
+#define IFC_NAND_ECCSTAT3_ERRCNT_SECTOR13_SHIFT	16
+#define IFC_NAND_ECCSTAT3_ERRCNT_SECTOR14_MASK	0x00000F00
+#define IFC_NAND_ECCSTAT3_ERRCNT_SECTOR14_SHIFT	8
+#define IFC_NAND_ECCSTAT3_ERRCNT_SECTOR15_MASK	0x0000000F
+#define IFC_NAND_ECCSTAT3_ERRCNT_SECTOR15_SHIFT	0
+
+/*
+ * NAND Control Register (NANDCR)
+ */
+#define IFC_NAND_NCR_FTOCNT_MASK	0x1E000000
+#define IFC_NAND_NCR_FTOCNT_SHIFT	25
+#define IFC_NAND_NCR_FTOCNT(n)	((_ilog2(n) - 8)  << IFC_NAND_NCR_FTOCNT_SHIFT)
+
+/*
+ * NAND_AUTOBOOT_TRGR
+ */
+/* Trigger RCW load */
+#define IFC_NAND_AUTOBOOT_TRGR_RCW_LD	0x80000000
+/* Trigget Auto Boot */
+#define IFC_NAND_AUTOBOOT_TRGR_BOOT_LD	0x20000000
+
+/*
+ * NAND_MDR
+ */
+/* 1st read data byte when opcode SBRD */
+#define IFC_NAND_MDR_RDATA0		0xFF000000
+/* 2nd read data byte when opcode SBRD */
+#define IFC_NAND_MDR_RDATA1		0x00FF0000
+
+/*
+ * NOR Machine Specific Registers
+ */
+/*
+ * NOR Event and Error Status Register (NOR_EVTER_STAT)
+ */
+/* NOR Command Sequence Operation Complete */
+#define IFC_NOR_EVTER_STAT_OPC_NOR	0x80000000
+/* Write Protect Error */
+#define IFC_NOR_EVTER_STAT_WPER		0x04000000
+/* Command Sequence Timeout Error */
+#define IFC_NOR_EVTER_STAT_STOER	0x01000000
+
+/*
+ * NOR Event and Error Enable Register (NOR_EVTER_EN)
+ */
+/* NOR Command Seq complete event enable */
+#define IFC_NOR_EVTER_EN_OPCEN_NOR	0x80000000
+/* Write Protect Error Checking Enable */
+#define IFC_NOR_EVTER_EN_WPEREN		0x04000000
+/* Timeout Error Enable */
+#define IFC_NOR_EVTER_EN_STOEREN	0x01000000
+
+/*
+ * NOR Event and Error Interrupt Enable Register (NOR_EVTER_INTR_EN)
+ */
+/* Enable interrupt for OPC complete */
+#define IFC_NOR_EVTER_INTR_OPCEN_NOR	0x80000000
+/* Enable interrupt for write protect error */
+#define IFC_NOR_EVTER_INTR_WPEREN	0x04000000
+/* Enable interrupt for timeout error */
+#define IFC_NOR_EVTER_INTR_STOEREN	0x01000000
+
+/*
+ * NOR Transfer Error Attribute Register-0 (NOR_ERATTR0)
+ */
+/* Source ID for error transaction */
+#define IFC_NOR_ERATTR0_ERSRCID		0xFF000000
+/* AXI ID for error transation */
+#define IFC_NOR_ERATTR0_ERAID		0x000FF000
+/* Chip select corresponds to NOR error */
+#define IFC_NOR_ERATTR0_ERCS_CS0	0x00000000
+#define IFC_NOR_ERATTR0_ERCS_CS1	0x00000010
+#define IFC_NOR_ERATTR0_ERCS_CS2	0x00000020
+#define IFC_NOR_ERATTR0_ERCS_CS3	0x00000030
+/* Type of transaction read/write */
+#define IFC_NOR_ERATTR0_ERTYPE_READ	0x00000001
+
+/*
+ * NOR Transfer Error Attribute Register-2 (NOR_ERATTR2)
+ */
+#define IFC_NOR_ERATTR2_ER_NUM_PHASE_EXP	0x000F0000
+#define IFC_NOR_ERATTR2_ER_NUM_PHASE_PER	0x00000F00
+
+/*
+ * NOR Control Register (NORCR)
+ */
+#define IFC_NORCR_MASK			0x0F0F0000
+/* No. of Address/Data Phase */
+#define IFC_NORCR_NUM_PHASE_MASK	0x0F000000
+#define IFC_NORCR_NUM_PHASE_SHIFT	24
+#define IFC_NORCR_NUM_PHASE(n)	((n-1) << IFC_NORCR_NUM_PHASE_SHIFT)
+/* Sequence Timeout Count */
+#define IFC_NORCR_STOCNT_MASK		0x000F0000
+#define IFC_NORCR_STOCNT_SHIFT		16
+#define IFC_NORCR_STOCNT(n)	((__ilog2(n) - 8) << IFC_NORCR_STOCNT_SHIFT)
+
+/*
+ * GPCM Machine specific registers
+ */
+/*
+ * GPCM Event and Error Status Register (GPCM_EVTER_STAT)
+ */
+/* Timeout error */
+#define IFC_GPCM_EVTER_STAT_TOER	0x04000000
+/* Parity error */
+#define IFC_GPCM_EVTER_STAT_PER		0x01000000
+
+/*
+ * GPCM Event and Error Enable Register (GPCM_EVTER_EN)
+ */
+/* Timeout error enable */
+#define IFC_GPCM_EVTER_EN_TOER_EN	0x04000000
+/* Parity error enable */
+#define IFC_GPCM_EVTER_EN_PER_EN	0x01000000
+
+/*
+ * GPCM Event and Error Interrupt Enable Register (GPCM_EVTER_INTR_EN)
+ */
+/* Enable Interrupt for timeout error */
+#define IFC_GPCM_EEIER_TOERIR_EN	0x04000000
+/* Enable Interrupt for Parity error */
+#define IFC_GPCM_EEIER_PERIR_EN		0x01000000
+
+/*
+ * GPCM Transfer Error Attribute Register-0 (GPCM_ERATTR0)
+ */
+/* Source ID for error transaction */
+#define IFC_GPCM_ERATTR0_ERSRCID	0xFF000000
+/* AXI ID for error transaction */
+#define IFC_GPCM_ERATTR0_ERAID		0x000FF000
+/* Chip select corresponds to GPCM error */
+#define IFC_GPCM_ERATTR0_ERCS_CS0	0x00000000
+#define IFC_GPCM_ERATTR0_ERCS_CS1	0x00000040
+#define IFC_GPCM_ERATTR0_ERCS_CS2	0x00000080
+#define IFC_GPCM_ERATTR0_ERCS_CS3	0x000000C0
+/* Type of transaction read/Write */
+#define IFC_GPCM_ERATTR0_ERTYPE_READ	0x00000001
+
+/*
+ * GPCM Transfer Error Attribute Register-2 (GPCM_ERATTR2)
+ */
+/* On which beat of address/data parity error is observed */
+#define IFC_GPCM_ERATTR2_PERR_BEAT		0x00000C00
+/* Parity Error on byte */
+#define IFC_GPCM_ERATTR2_PERR_BYTE		0x000000F0
+/* Parity Error reported in addr or data phase */
+#define IFC_GPCM_ERATTR2_PERR_DATA_PHASE	0x00000001
+
+/*
+ * GPCM Status Register (GPCM_STAT)
+ */
+#define IFC_GPCM_STAT_BSY		0x80000000  /* GPCM is busy */
+
+
+#ifndef __ASSEMBLY__
+#include <asm/io.h>
+
+extern void print_ifc_regs(void);
+extern void init_early_memctl_regs(void);
+
+#define IFC_BASE_ADDR ((struct fsl_ifc *)CONFIG_SYS_IFC_ADDR)
+
+#define get_ifc_cspr(i) (in_be32(&(IFC_BASE_ADDR)->cspr_cs[i].cspr))
+#define get_ifc_csor(i) (in_be32(&(IFC_BASE_ADDR)->csor_cs[i].csor))
+#define get_ifc_amask(i) (in_be32(&(IFC_BASE_ADDR)->amask_cs[i].amask))
+#define get_ifc_ftim(i, j) (in_be32(&(IFC_BASE_ADDR)->ftim_cs[i].ftim[j]))
+
+#define set_ifc_cspr(i, v) (out_be32(&(IFC_BASE_ADDR)->cspr_cs[i].cspr, v))
+#define set_ifc_csor(i, v) (out_be32(&(IFC_BASE_ADDR)->csor_cs[i].csor, v))
+#define set_ifc_amask(i, v) (out_be32(&(IFC_BASE_ADDR)->amask_cs[i].amask, v))
+#define set_ifc_ftim(i, j, v) \
+			(out_be32(&(IFC_BASE_ADDR)->ftim_cs[i].ftim[j], v))
+
+#define FSL_IFC_BANK_COUNT	4
+
+enum ifc_chip_sel {
+	IFC_CS0,
+	IFC_CS1,
+	IFC_CS2,
+	IFC_CS3,
+};
+
+enum ifc_ftims {
+	IFC_FTIM0,
+	IFC_FTIM1,
+	IFC_FTIM2,
+	IFC_FTIM3,
+};
+
+/*
+ * IFC Controller NAND Machine registers
+ */
+struct fsl_ifc_nand {
+	u32 ncfgr;
+	u32 res1[0x4];
+	u32 nand_fcr0;
+	u32 nand_fcr1;
+	u32 res2[0x8];
+	u32 row0;
+	u32 res3;
+	u32 col0;
+	u32 res4;
+	u32 row1;
+	u32 res5;
+	u32 col1;
+	u32 res6;
+	u32 row2;
+	u32 res7;
+	u32 col2;
+	u32 res8;
+	u32 row3;
+	u32 res9;
+	u32 col3;
+	u32 res10[0x24];
+	u32 nand_fbcr;
+	u32 res11;
+	u32 nand_fir0;
+	u32 nand_fir1;
+	u32 nand_fir2;
+	u32 res12[0x10];
+	u32 nand_csel;
+	u32 res13;
+	u32 nandseq_strt;
+	u32 res14;
+	u32 nand_evter_stat;
+	u32 res15;
+	u32 pgrdcmpl_evt_stat;
+	u32 res16[0x2];
+	u32 nand_evter_en;
+	u32 res17[0x2];
+	u32 nand_evter_intr_en;
+	u32 res18[0x2];
+	u32 nand_erattr0;
+	u32 nand_erattr1;
+	u32 res19[0x10];
+	u32 nand_fsr;
+	u32 res20;
+	u32 nand_eccstat0;
+	u32 nand_eccstat1;
+	u32 nand_eccstat2;
+	u32 nand_eccstat3;
+	u32 res21[0x20];
+	u32 nanndcr;
+	u32 res22[0x2];
+	u32 nand_autoboot_trgr;
+	u32 res23;
+	u32 nand_mdr;
+	u32 res24[0x5C];
+};
+
+/*
+ * IFC controller NOR Machine registers
+ */
+struct fsl_ifc_nor {
+	u32 nor_evter_stat;
+	u32 res1[0x2];
+	u32 nor_evter_en;
+	u32 res2[0x2];
+	u32 nor_evter_intr_en;
+	u32 res3[0x2];
+	u32 nor_erattr0;
+	u32 nor_erattr1;
+	u32 nor_erattr2;
+	u32 res4[0x4];
+	u32 norcr;
+	u32 res5[0xEF];
+};
+
+/*
+ * IFC controller GPCM Machine registers
+ */
+struct fsl_ifc_gpcm {
+	u32 gpcm_evter_stat;
+	u32 res1[0x2];
+	u32 gpcm_evter_en;
+	u32 res2[0x2];
+	u32 gpcm_evter_intr_en;
+	u32 res3[0x2];
+	u32 gpcm_erattr0;
+	u32 gpcm_erattr1;
+	u32 gpcm_erattr2;
+	u32 gpcm_stat;
+	u32 res4[0x1F3];
+};
+
+
+/*
+ * IFC Controller Registers
+ */
+struct fsl_ifc {
+	u32 ifc_rev;
+	u32 res1[0x3];
+	struct {
+		u32 cspr;
+		u32 res2[0x2];
+	} cspr_cs[FSL_IFC_BANK_COUNT];
+	u32 res3[0x18];
+	struct {
+		u32 amask;
+		u32 res4[0x2];
+	} amask_cs[FSL_IFC_BANK_COUNT];
+	u32 res5[0x18];
+	struct {
+		u32 csor;
+		u32 res6[0x2];
+	} csor_cs[FSL_IFC_BANK_COUNT];
+	u32 res7[0x18];
+	struct {
+		u32 ftim[4];
+		u32 res8[0x8];
+	} ftim_cs[FSL_IFC_BANK_COUNT];
+	u32 res9[0x60];
+	u32 rb_stat;
+	u32 res10[0x2];
+	u32 ifc_gcr;
+	u32 res11[0x2];
+	u32 cm_evter_stat;
+	u32 res12[0x2];
+	u32 cm_evter_en;
+	u32 res13[0x2];
+	u32 cm_evter_intr_en;
+	u32 res14[0x2];
+	u32 cm_erattr0;
+	u32 cm_erattr1;
+	u32 res15[0x2];
+	u32 ifc_ccr;
+	u32 ifc_csr;
+	u32 res16[0x2EB];
+	struct fsl_ifc_nand ifc_nand;
+	struct fsl_ifc_nor ifc_nor;
+	struct fsl_ifc_gpcm ifc_gpcm;
+};
+
+#endif /* __ASSEMBLY__ */
+#endif /* __ASM_PPC_FSL_IFC_H */
diff --git a/arch/powerpc/include/asm/fsl_law.h b/arch/powerpc/include/asm/fsl_law.h
index 6a4279ce98..13caffd96e 100644
--- a/arch/powerpc/include/asm/fsl_law.h
+++ b/arch/powerpc/include/asm/fsl_law.h
@@ -1,5 +1,5 @@
 /*
- * Copyright 2008-2010 Freescale Semiconductor, Inc.
+ * Copyright 2008-2011 Freescale Semiconductor, Inc.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -83,6 +83,7 @@ enum law_trgt_if {
 	LAW_TRGT_IF_DDR_INTRLV = 0x0b,
 	LAW_TRGT_IF_RIO = 0x0c,
 	LAW_TRGT_IF_RIO_2 = 0x0d,
+	LAW_TRGT_IF_DPAA_SWP_SRAM = 0x0e,
 	LAW_TRGT_IF_DDR = 0x0f,
 	LAW_TRGT_IF_DDR_2 = 0x16,	/* 2nd controller */
 };
@@ -91,6 +92,7 @@ enum law_trgt_if {
 #define LAW_TRGT_IF_PCIX	LAW_TRGT_IF_PCI
 #define LAW_TRGT_IF_PCIE_2	LAW_TRGT_IF_PCI_2
 #define LAW_TRGT_IF_RIO_1	LAW_TRGT_IF_RIO
+#define LAW_TRGT_IF_IFC		LAW_TRGT_IF_LBC
 
 #ifdef CONFIG_MPC8641
 #define LAW_TRGT_IF_PCIE_1	LAW_TRGT_IF_PCI
diff --git a/arch/powerpc/include/asm/fsl_liodn.h b/arch/powerpc/include/asm/fsl_liodn.h
index 4c17fe232e..0ec5c0a3f5 100644
--- a/arch/powerpc/include/asm/fsl_liodn.h
+++ b/arch/powerpc/include/asm/fsl_liodn.h
@@ -1,5 +1,5 @@
 /*
- * Copyright 2009-2010 Freescale Semiconductor, Inc.
+ * Copyright 2009-2011 Freescale Semiconductor, Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -70,8 +70,8 @@ extern void fdt_fixup_liodn(void *blob);
 	SET_GUTS_LIODN("fsl,pq-sata-v2", liodn, sata##sataNum##liodnr,\
 		CONFIG_SYS_MPC85xx_SATA##sataNum##_OFFSET)
 
-#define SET_PCI_LIODN(pciNum, liodn) \
-	SET_GUTS_LIODN("fsl,p4080-pcie", liodn, pex##pciNum##liodnr,\
+#define SET_PCI_LIODN(compat, pciNum, liodn) \
+	SET_GUTS_LIODN(compat, liodn, pex##pciNum##liodnr,\
 		CONFIG_SYS_MPC85xx_PCIE##pciNum##_OFFSET)
 
 /* reg nodes for DMA start @ 0x300 */
@@ -85,13 +85,13 @@ extern void fdt_fixup_liodn(void *blob);
 
 #define SET_QMAN_LIODN(liodn) \
 	SET_LIODN_ENTRY_1("fsl,qman", liodn, offsetof(ccsr_qman_t, liodnr) + \
-		CONFIG_SYS_FSL_CORENET_QMAN_OFFSET, \
-		CONFIG_SYS_FSL_CORENET_QMAN_OFFSET)
+		CONFIG_SYS_FSL_QMAN_OFFSET, \
+		CONFIG_SYS_FSL_QMAN_OFFSET)
 
 #define SET_BMAN_LIODN(liodn) \
 	SET_LIODN_ENTRY_1("fsl,bman", liodn, offsetof(ccsr_bman_t, liodnr) + \
-		CONFIG_SYS_FSL_CORENET_BMAN_OFFSET, \
-		CONFIG_SYS_FSL_CORENET_BMAN_OFFSET)
+		CONFIG_SYS_FSL_BMAN_OFFSET, \
+		CONFIG_SYS_FSL_BMAN_OFFSET)
 
 #define SET_PME_LIODN(liodn) \
 	SET_LIODN_ENTRY_1("fsl,pme", liodn, offsetof(ccsr_pme_t, liodnr) + \
diff --git a/arch/powerpc/include/asm/fsl_pci.h b/arch/powerpc/include/asm/fsl_pci.h
index 0a98bdee36..82d75bef6a 100644
--- a/arch/powerpc/include/asm/fsl_pci.h
+++ b/arch/powerpc/include/asm/fsl_pci.h
@@ -1,5 +1,5 @@
 /*
- * Copyright 2007,2009-2010 Freescale Semiconductor, Inc.
+ * Copyright 2007,2009-2011 Freescale Semiconductor, Inc.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
@@ -25,6 +25,9 @@
 #include <asm/fsl_serdes.h>
 #include <pci.h>
 
+#define PEX_IP_BLK_REV_2_2	0x02080202
+#define PEX_IP_BLK_REV_2_3	0x02080203
+
 int fsl_setup_hose(struct pci_controller *hose, unsigned long addr);
 int fsl_is_pci_agent(struct pci_controller *hose);
 void fsl_pci_config_unlock(struct pci_controller *hose);
@@ -73,7 +76,8 @@ typedef struct ccsr_pci {
 	u32	out_comp_to;	/* 0x00C - PCI Outbound Completion Timeout Register */
 	u32	out_conf_to;	/* 0x010 - PCI Configuration Timeout Register */
 	u32	config;		/* 0x014 - PCIE CONFIG Register */
-	char	res2[8];
+	u32	int_status;	/* 0x018 - PCIE interrupt status register */
+	char	res2[4];
 	u32	pme_msg_det;	/* 0x020 - PCIE PME & message detect register */
 	u32	pme_msg_dis;	/* 0x024 - PCIE PME & message disable register */
 	u32	pme_msg_int_en;	/* 0x028 - PCIE PME & message interrupt enable register */
@@ -83,8 +87,11 @@ typedef struct ccsr_pci {
 	u32	block_rev2;	/* 0xbfc - PCIE Block Revision register 2 */
 
 	pot_t	pot[5];		/* 0xc00 - 0xc9f Outbound ATMU's 0, 1, 2, 3, and 4 */
-	u32	res5[64];
-	pit_t	pit[3];		/* 0xda0 - 0xdff Inbound ATMU's 3, 2, and 1 */
+	u32	res5[24];
+	pit_t	pmit;		/* 0xd00 - 0xd9c Inbound ATMU's MSI */
+	u32	res6[24];
+	pit_t	pit[4];		/* 0xd80 - 0xdff Inbound ATMU's 3, 2, 1 and 0 */
+
 #define PIT3 0
 #define PIT2 1
 #define PIT1 2
@@ -158,6 +165,11 @@ typedef struct ccsr_pci {
 	u32	pdb_stat;	/* 0xf00 - PCIE Debug Status */
 	char	res24[252];
 } ccsr_fsl_pci_t;
+#define PCIE_CONFIG_PC	0x00020000
+#define PCIE_CONFIG_OB_CK	0x00002000
+#define PCIE_CONFIG_SAC	0x00000010
+#define PCIE_CONFIG_SP	0x80000002
+#define PCIE_CONFIG_SCC	0x80000001
 
 struct fsl_pci_info {
 	unsigned long regs;
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index 6bd83ba166..d26d648b13 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -31,6 +31,7 @@
 #include <asm/types.h>
 #include <asm/fsl_dma.h>
 #include <asm/fsl_i2c.h>
+#include <asm/fsl_ifc.h>
 #include <asm/fsl_lbc.h>
 #include <asm/fsl_fman.h>
 
@@ -1864,8 +1865,13 @@ typedef struct ccsr_gur {
 #define MPC85xx_PORBMSR_HA_SHIFT	16
 	u32	porimpscr;	/* POR I/O impedance status & control */
 	u32	pordevsr;	/* POR I/O device status regsiter */
+#if defined(CONFIG_P1017) || defined(CONFIG_P1023)
+#define MPC85xx_PORDEVSR_SGMII1_DIS	0x10000000
+#define MPC85xx_PORDEVSR_SGMII2_DIS	0x08000000
+#else
 #define MPC85xx_PORDEVSR_SGMII1_DIS	0x20000000
 #define MPC85xx_PORDEVSR_SGMII2_DIS	0x10000000
+#endif
 #define MPC85xx_PORDEVSR_SGMII3_DIS	0x08000000
 #define MPC85xx_PORDEVSR_SGMII4_DIS	0x04000000
 #define MPC85xx_PORDEVSR_SRDS2_IO_SEL	0x38000000
@@ -1873,9 +1879,17 @@ typedef struct ccsr_gur {
 #if defined(CONFIG_P1013) || defined(CONFIG_P1022)
 #define MPC85xx_PORDEVSR_IO_SEL		0x007c0000
 #define MPC85xx_PORDEVSR_IO_SEL_SHIFT	18
+#elif defined(CONFIG_P1017) || defined(CONFIG_P1023)
+#define MPC85xx_PORDEVSR_IO_SEL		0x00600000
+#define MPC85xx_PORDEVSR_IO_SEL_SHIFT	21
+#else
+#if defined(CONFIG_P1010)
+#define MPC85xx_PORDEVSR_IO_SEL		0x00600000
+#define MPC85xx_PORDEVSR_IO_SEL_SHIFT	21
 #else
 #define MPC85xx_PORDEVSR_IO_SEL		0x00780000
 #define MPC85xx_PORDEVSR_IO_SEL_SHIFT	19
+#endif /* if defined(CONFIG_P1010) */
 #endif
 #define MPC85xx_PORDEVSR_PCI2_ARB	0x00040000
 #define MPC85xx_PORDEVSR_PCI1_ARB	0x00020000
@@ -2190,8 +2204,8 @@ typedef struct ccsr_pme {
 #define CONFIG_SYS_MPC85xx_SATA2_OFFSET		0x221000
 #define CONFIG_SYS_FSL_SEC_OFFSET		0x300000
 #define CONFIG_SYS_FSL_CORENET_PME_OFFSET	0x316000
-#define CONFIG_SYS_FSL_CORENET_QMAN_OFFSET	0x318000
-#define CONFIG_SYS_FSL_CORENET_BMAN_OFFSET	0x31a000
+#define CONFIG_SYS_FSL_QMAN_OFFSET		0x318000
+#define CONFIG_SYS_FSL_BMAN_OFFSET		0x31a000
 #define CONFIG_SYS_FSL_FM1_OFFSET		0x400000
 #define CONFIG_SYS_FSL_FM1_RX0_1G_OFFSET	0x488000
 #define CONFIG_SYS_FSL_FM1_RX1_1G_OFFSET	0x489000
@@ -2227,6 +2241,7 @@ typedef struct ccsr_pme {
 #define CONFIG_SYS_MPC85xx_GPIO_OFFSET		0xF000
 #define CONFIG_SYS_MPC85xx_SATA1_OFFSET		0x18000
 #define CONFIG_SYS_MPC85xx_SATA2_OFFSET		0x19000
+#define CONFIG_SYS_MPC85xx_IFC_OFFSET		0x1e000
 #define CONFIG_SYS_MPC85xx_L2_OFFSET		0x20000
 #define CONFIG_SYS_MPC85xx_DMA_OFFSET		0x21000
 #define CONFIG_SYS_MPC85xx_USB_OFFSET		0x22000
@@ -2240,6 +2255,12 @@ typedef struct ccsr_pme {
 #define CONFIG_SYS_MPC85xx_SERDES2_OFFSET	0xE3100
 #define CONFIG_SYS_MPC85xx_SERDES1_OFFSET	0xE3000
 #define CONFIG_SYS_MPC85xx_CPM_OFFSET		0x80000
+#define CONFIG_SYS_FSL_QMAN_OFFSET		0x88000
+#define CONFIG_SYS_FSL_BMAN_OFFSET		0x8a000
+#define CONFIG_SYS_FSL_FM1_OFFSET		0x100000
+#define CONFIG_SYS_FSL_FM1_RX0_1G_OFFSET	0x188000
+#define CONFIG_SYS_FSL_FM1_RX1_1G_OFFSET	0x189000
+#define CONFIG_SYS_FSL_FM1_DTSEC1_OFFSET	0x1e0000
 #endif
 
 #define CONFIG_SYS_MPC85xx_PIC_OFFSET		0x40000
@@ -2247,10 +2268,10 @@ typedef struct ccsr_pme {
 
 #define CONFIG_SYS_FSL_CPC_ADDR	\
 	(CONFIG_SYS_CCSRBAR + CONFIG_SYS_FSL_CPC_OFFSET)
-#define CONFIG_SYS_FSL_CORENET_QMAN_ADDR \
-	(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_QMAN_OFFSET)
-#define CONFIG_SYS_FSL_CORENET_BMAN_ADDR \
-	(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_BMAN_OFFSET)
+#define CONFIG_SYS_FSL_QMAN_ADDR \
+	(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_QMAN_OFFSET)
+#define CONFIG_SYS_FSL_BMAN_ADDR \
+	(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_BMAN_OFFSET)
 #define CONFIG_SYS_FSL_CORENET_PME_ADDR \
 	(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_PME_OFFSET)
 #define CONFIG_SYS_MPC85xx_GUTS_ADDR \
@@ -2269,6 +2290,8 @@ typedef struct ccsr_pme {
 	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_DDR2_OFFSET)
 #define CONFIG_SYS_LBC_ADDR \
 	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_LBC_OFFSET)
+#define CONFIG_SYS_IFC_ADDR \
+	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_IFC_OFFSET)
 #define CONFIG_SYS_MPC85xx_ESPI_ADDR \
 	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_ESPI_OFFSET)
 #define CONFIG_SYS_MPC85xx_PCIX_ADDR \
diff --git a/arch/powerpc/include/asm/immap_qe.h b/arch/powerpc/include/asm/immap_qe.h
index 531cfc891d..9be9dca1f7 100644
--- a/arch/powerpc/include/asm/immap_qe.h
+++ b/arch/powerpc/include/asm/immap_qe.h
@@ -3,7 +3,7 @@
  * The Internal Memory Map for devices with QE on them. This
  * is the superset of all QE devices (8360, etc.).
  *
- * Copyright (c) 2006-2009 Freescale Semiconductor, Inc.
+ * Copyright (c) 2006-2009, 2011 Freescale Semiconductor, Inc.
  * Author: Shlomi Gridih <gridish@freescale.com>
  *
  * This program is free software; you can redistribute  it and/or modify it
@@ -15,8 +15,19 @@
 #ifndef __IMMAP_QE_H__
 #define __IMMAP_QE_H__
 
-/* QE I-RAM
-*/
+#ifdef CONFIG_MPC83xx
+#if defined(CONFIG_MPC8360)
+#define QE_MURAM_SIZE		0xc000UL
+#define MAX_QE_RISC		2
+#define QE_NUM_OF_SNUM		28
+#elif defined(CONFIG_MPC832x)
+#define QE_MURAM_SIZE		0x4000UL
+#define MAX_QE_RISC		1
+#define QE_NUM_OF_SNUM		28
+#endif
+#endif
+
+/* QE I-RAM */
 typedef struct qe_iram {
 	u32 iadd;		/* I-RAM Address Register */
 	u32 idata;		/* I-RAM Data Register    */
@@ -25,8 +36,7 @@ typedef struct qe_iram {
 	u8 res1[0x70];
 } __attribute__ ((packed)) qe_iram_t;
 
-/* QE Interrupt Controller
-*/
+/* QE Interrupt Controller */
 typedef struct qe_ic {
 	u32 qicr;
 	u32 qivec;
@@ -49,8 +59,7 @@ typedef struct qe_ic {
 	u8 res3[0x1C];
 } __attribute__ ((packed)) qe_ic_t;
 
-/* Communications Processor
-*/
+/* Communications Processor */
 typedef struct cp_qe {
 	u32 cecr;		/* QE command register */
 	u32 ceccr;		/* QE controller configuration register */
@@ -87,8 +96,7 @@ typedef struct cp_qe {
 	u8 res13[0x280];
 } __attribute__ ((packed)) cp_qe_t;
 
-/* QE Multiplexer
-*/
+/* QE Multiplexer */
 typedef struct qe_mux {
 	u32 cmxgcr;		/* CMX general clock route register    */
 	u32 cmxsi1cr_l;		/* CMX SI1 clock route low register    */
@@ -102,8 +110,7 @@ typedef struct qe_mux {
 	u8 res0[0x1C];
 } __attribute__ ((packed)) qe_mux_t;
 
-/* QE Timers
-*/
+/* QE Timers */
 typedef struct qe_timers {
 	u8 gtcfr1;		/* Timer 1 2 global configuration register */
 	u8 res0[0x3];
@@ -133,8 +140,7 @@ typedef struct qe_timers {
 	u8 res2[0x46];
 } __attribute__ ((packed)) qe_timers_t;
 
-/* BRG
-*/
+/* BRG */
 typedef struct qe_brg {
 	u32 brgc1;		/* BRG1 configuration register  */
 	u32 brgc2;		/* BRG2 configuration register  */
@@ -155,8 +161,7 @@ typedef struct qe_brg {
 	u8 res0[0x40];
 } __attribute__ ((packed)) qe_brg_t;
 
-/* SPI
-*/
+/* SPI */
 typedef struct spi {
 	u8 res0[0x20];
 	u32 spmode;		/* SPI mode register */
@@ -174,8 +179,7 @@ typedef struct spi {
 	u8 res7[0x8];
 } __attribute__ ((packed)) spi_t;
 
-/* SI
-*/
+/* SI */
 typedef struct si1 {
 	u16 siamr1;		/* SI1 TDMA mode register */
 	u16 sibmr1;		/* SI1 TDMB mode register */
@@ -222,16 +226,14 @@ typedef struct si1 {
 	u8 res9[0xBB];
 } __attribute__ ((packed)) si1_t;
 
-/* SI Routing Tables
-*/
+/* SI Routing Tables */
 typedef struct sir {
 	u8 tx[0x400];
 	u8 rx[0x400];
 	u8 res0[0x800];
 } __attribute__ ((packed)) sir_t;
 
-/* USB Controller.
-*/
+/* USB Controller.  */
 typedef struct usb_ctlr {
 	u8 usb_usmod;
 	u8 usb_usadr;
@@ -253,8 +255,7 @@ typedef struct usb_ctlr {
 	u8 res6[0x22];
 } __attribute__ ((packed)) usb_t;
 
-/* MCC
-*/
+/* MCC */
 typedef struct mcc {
 	u32 mcce;		/* MCC event register */
 	u32 mccm;		/* MCC mask register */
@@ -263,8 +264,7 @@ typedef struct mcc {
 	u8 res0[0xF0];
 } __attribute__ ((packed)) mcc_t;
 
-/* QE UCC Slow
-*/
+/* QE UCC Slow */
 typedef struct ucc_slow {
 	u32 gumr_l;		/* UCCx general mode register (low) */
 	u32 gumr_h;		/* UCCx general mode register (high) */
@@ -368,8 +368,7 @@ typedef struct ucc_ethernet {
 	u8 res5[0x200 - 0x1c4];
 } __attribute__ ((packed)) uec_t;
 
-/* QE UCC Fast
-*/
+/* QE UCC Fast */
 typedef struct ucc_fast {
 	u32 gumr;		/* UCCx general mode register */
 	u32 upsmr;		/* UCCx protocol-specific mode register  */
@@ -403,8 +402,7 @@ typedef struct ucc_fast {
 	uec_t ucc_eth;
 } __attribute__ ((packed)) ucc_fast_t;
 
-/* QE UCC
-*/
+/* QE UCC */
 typedef struct ucc_common {
 	u8 res1[0x90];
 	u8 guemr;
@@ -419,8 +417,7 @@ typedef struct ucc {
 	};
 } __attribute__ ((packed)) ucc_t;
 
-/* MultiPHY UTOPIA POS Controllers (UPC)
-*/
+/* MultiPHY UTOPIA POS Controllers (UPC) */
 typedef struct upc {
 	u32 upgcr;		/* UTOPIA/POS general configuration register */
 	u32 uplpa;		/* UTOPIA/POS last PHY address */
@@ -476,8 +473,7 @@ typedef struct upc {
 	u8 res2[0x150];
 } __attribute__ ((packed)) upc_t;
 
-/* SDMA
-*/
+/* SDMA */
 typedef struct sdma {
 	u32 sdsr;		/* Serial DMA status register */
 	u32 sdmr;		/* Serial DMA mode register */
@@ -497,8 +493,7 @@ typedef struct sdma {
 	u8 res2[0x38];
 } __attribute__ ((packed)) sdma_t;
 
-/* Debug Space
-*/
+/* Debug Space */
 typedef struct dbg {
 	u32 bpdcr;		/* Breakpoint debug command register */
 	u32 bpdsr;		/* Breakpoint debug status register */
@@ -582,40 +577,9 @@ typedef struct qe_immap {
 	u8 res14[0x300];
 	u8 res15[0x3A00];
 	u8 res16[0x8000];	/* 0x108000 -  0x110000 */
-#if defined(CONFIG_MPC8568)
-	u8 muram[0x10000];	/* 0x1_0000 -  0x2_0000 Multi-user RAM */
-	u8 res17[0x20000];	/* 0x2_0000 -  0x4_0000 */
-#elif defined(CONFIG_MPC8569)
-	u8 muram[0x20000];	/* 0x1_0000 -  0x3_0000 Multi-user RAM */
-	u8 res17[0x10000];	/* 0x3_0000 -  0x4_0000 */
-#else
-	u8 muram[0xC000];	/* 0x110000 -  0x11C000 Multi-user RAM */
-	u8 res17[0x24000];	/* 0x11C000 -  0x140000 */
-	u8 res18[0xC0000];	/* 0x140000 -  0x200000 */
-#endif
+	u8 muram[QE_MURAM_SIZE];
 } __attribute__ ((packed)) qe_map_t;
 
 extern qe_map_t *qe_immr;
 
-#if defined(CONFIG_MPC8568)
-#define QE_MURAM_SIZE		0x10000UL
-#elif defined(CONFIG_MPC8569)
-#define QE_MURAM_SIZE		0x20000UL
-#elif defined(CONFIG_MPC8360)
-#define QE_MURAM_SIZE		0xc000UL
-#elif defined(CONFIG_MPC832x)
-#define QE_MURAM_SIZE		0x4000UL
-#endif
-
-#if defined(CONFIG_MPC8323)
-#define MAX_QE_RISC     1
-#define QE_NUM_OF_SNUM	28
-#elif defined(CONFIG_MPC8569)
-#define MAX_QE_RISC     4
-#define QE_NUM_OF_SNUM	46
-#else
-#define MAX_QE_RISC	2
-#define QE_NUM_OF_SNUM	28
-#endif
-
 #endif				/* __IMMAP_QE_H__ */
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index fcee1a2428..f5bf4dd4fd 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -1048,12 +1048,24 @@
 #define SVR_P1013_E	0x80EF00
 #define SVR_P1014	0x80F101
 #define SVR_P1014_E	0x80F901
+#define SVR_P1015	0x80E502
+#define SVR_P1015_E	0x80ED02
+#define SVR_P1016	0x80E503
+#define SVR_P1016_E	0x80ED03
+#define SVR_P1017	0x80F700
+#define SVR_P1017_E	0x80FF00
 #define SVR_P1020	0x80E400
 #define SVR_P1020_E	0x80EC00
 #define SVR_P1021	0x80E401
 #define SVR_P1021_E	0x80EC01
 #define SVR_P1022	0x80E600
 #define SVR_P1022_E	0x80EE00
+#define SVR_P1023	0x80F600
+#define SVR_P1023_E	0x80FE00
+#define SVR_P1024	0x80E402
+#define SVR_P1024_E	0x80EC02
+#define SVR_P1025	0x80E403
+#define SVR_P1025_E	0x80EC03
 #define SVR_P2010	0x80E300
 #define SVR_P2010_E	0x80EB00
 #define SVR_P2020	0x80E200
diff --git a/arch/powerpc/lib/board.c b/arch/powerpc/lib/board.c
index 4719f8c696..83fb0744f5 100644
--- a/arch/powerpc/lib/board.c
+++ b/arch/powerpc/lib/board.c
@@ -186,6 +186,12 @@ int __board_flash_wp_on(void)
 }
 int board_flash_wp_on(void) __attribute__((weak, alias("__board_flash_wp_on")));
 
+void __cpu_secondary_init_r(void)
+{
+}
+void cpu_secondary_init_r(void)
+__attribute__((weak, alias("__cpu_secondary_init_r")));
+
 static int init_func_ram (void)
 {
 #ifdef	CONFIG_BOARD_TYPES
@@ -798,6 +804,14 @@ void board_init_r (gd_t *id, ulong dest_addr)
 	env_relocate ();
 
 	/*
+	 * after non-volatile devices & environment is setup and cpu code have
+	 * another round to deal with any initialization that might require
+	 * full access to the environment or loading of some image (firmware)
+	 * from a non-volatile device
+	 */
+	cpu_secondary_init_r();
+
+	/*
 	 * Fill in missing fields of bd_info.
 	 * We do this here, where we have "normal" access to the
 	 * environment; we used to do this still running from ROM,
diff --git a/arch/powerpc/lib/bootm.c b/arch/powerpc/lib/bootm.c
index 116d81bec6..c7f3d084a3 100644
--- a/arch/powerpc/lib/bootm.c
+++ b/arch/powerpc/lib/bootm.c
@@ -33,6 +33,7 @@
 #include <bzlib.h>
 #include <environment.h>
 #include <asm/byteorder.h>
+#include <asm/mp.h>
 
 #if defined(CONFIG_OF_LIBFDT)
 #include <fdt.h>
@@ -166,6 +167,10 @@ void arch_lmb_reserve(struct lmb *lmb)
 	sp -= 4096;
 	lmb_reserve(lmb, sp, (CONFIG_SYS_SDRAM_BASE + get_effective_memsize() - sp));
 
+#ifdef CONFIG_MP
+	cpu_mp_lmb_reserve(lmb);
+#endif
+
 	return ;
 }