powerpc/mpc85xx: Add BSC9132/BSC9232 processor support

The BSC9132 is a highly integrated device that targets the evolving
 Microcell, Picocell, and Enterprise-Femto base station market subsegments.

 The BSC9132 device combines Power Architecture e500 and DSP StarCore SC3850
 core technologies with MAPLE-B2P baseband acceleration processing elements
 to address the need for a high performance, low cost, integrated solution
 that handles all required processing layers without the need for an
 external device except for an RF transceiver or, in a Micro base station
 configuration, a host device that handles the L3/L4 and handover between
 sectors.

 The BSC9132 SoC includes the following function and features:
    - Power Architecture subsystem including two e500 processors with
	512-Kbyte shared L2 cache
    - Two StarCore SC3850 DSP subsystems, each with a 512-Kbyte private L2
	cache
    - 32 Kbyte of shared M3 memory
    - The Multi Accelerator Platform Engine for Pico BaseStation Baseband
      Processing (MAPLE-B2P)
    - Two DDR3/3L memory interfaces with 32-bit data width (40 bits including
      ECC), up to 1333 MHz data rate
    - Dedicated security engine featuring trusted boot
    - Two DMA controllers
         - OCNDMA with four bidirectional channels
         - SysDMA with sixteen bidirectional channels
    - Interfaces
        - Four-lane SerDes PHY
	    - PCI Express controller complies with the PEX Specification-Rev 2.0
        - Two Common Public Radio Interface (CPRI) controller lanes
	    - High-speed USB 2.0 host and device controller with ULPI interface
        - Enhanced secure digital (SD/MMC) host controller (eSDHC)
	    - Antenna interface controller (AIC), supporting four industry
		standard JESD207/four custom ADI RF interfaces
       - ADI lanes support both full duplex FDD support & half duplex TDD
       - Universal Subscriber Identity Module (USIM) interface that
	   facilitates communication to SIM cards or Eurochip pre-paid phone
	   cards
       - Two DUART, two eSPI, and two I2C controllers
       - Integrated Flash memory controller (IFC)
       - GPIO
     - Sixteen 32-bit timers

Signed-off-by: Naveen Burmi <NaveenBurmi@freescale.com>
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>

6 files changed, 140 insertions, 2 deletions

diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile
index 95994d38d6..6776c85e49 100644
--- a/arch/powerpc/cpu/mpc85xx/Makefile
+++ b/arch/powerpc/cpu/mpc85xx/Makefile
@@ -86,6 +86,7 @@ COBJS-$(CONFIG_PPC_T4240)	+= ddr-gen3.o
 COBJS-$(CONFIG_PPC_B4420)	+= ddr-gen3.o
 COBJS-$(CONFIG_PPC_B4860)	+= ddr-gen3.o
 COBJS-$(CONFIG_BSC9131)		+= ddr-gen3.o
+COBJS-$(CONFIG_BSC9132)		+= ddr-gen3.o
 
 COBJS-$(CONFIG_CPM2)	+= ether_fcc.o
 COBJS-$(CONFIG_OF_LIBFDT) += fdt.o
@@ -138,6 +139,7 @@ COBJS-$(CONFIG_PPC_P5040) += p5040_serdes.o
 COBJS-$(CONFIG_PPC_T4240) += t4240_serdes.o
 COBJS-$(CONFIG_PPC_B4420) += b4860_serdes.o
 COBJS-$(CONFIG_PPC_B4860) += b4860_serdes.o
+COBJS-$(CONFIG_BSC9132) += bsc9132_serdes.o
 
 COBJS-y	+= cpu.o
 COBJS-y	+= cpu_init.o
diff --git a/arch/powerpc/cpu/mpc85xx/bsc9132_serdes.c b/arch/powerpc/cpu/mpc85xx/bsc9132_serdes.c
new file mode 100644
index 0000000000..300a4dbcf6
--- /dev/null
+++ b/arch/powerpc/cpu/mpc85xx/bsc9132_serdes.c
@@ -0,0 +1,96 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ * Author: Prabhakar Kushwaha <prabhakar@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <config.h>
+#include <common.h>
+#include <asm/io.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_serdes.h>
+
+#define SRDS1_MAX_LANES		4
+
+static u32 serdes1_prtcl_map;
+
+static u8 serdes1_cfg_tbl[][SRDS1_MAX_LANES] = {
+	 [0] = {NONE, NONE, NONE, NONE},
+	 [1] = {PCIE1, PCIE2, CPRI2, CPRI1},
+	 [2] = {PCIE1, PCIE2, CPRI2, CPRI1},
+	 [3] = {PCIE1, PCIE2, CPRI2, CPRI1},
+	 [4] = {PCIE1, PCIE2, CPRI2, CPRI1},
+	 [5] = {PCIE1, PCIE2, CPRI2, CPRI1},
+	 [6] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1},
+	 [7] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1},
+	 [8] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1},
+	 [9] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1},
+	[10] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1},
+	[11] = {PCIE1, PCIE2, SGMII_TSEC1, SGMII_TSEC2},
+	[12] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1},
+	[13] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1},
+	[14] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1},
+	[15] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1},
+	[16] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1},
+	[17] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1},
+	[18] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1},
+	[19] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1},
+	[20] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1},
+	[21] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1},
+	[22] = {PCIE1, PCIE2, CPRI2, CPRI1},
+	[23] = {PCIE1, PCIE2, CPRI2, CPRI1},
+	[24] = {PCIE1, PCIE2, CPRI2, CPRI1},
+	[25] = {PCIE1, PCIE2, CPRI2, CPRI1},
+	[26] = {PCIE1, PCIE2, CPRI2, CPRI1},
+	[27] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1},
+	[28] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1},
+	[29] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1},
+	[30] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1},
+	[31] = {PCIE1, PCIE2, SGMII_TSEC1, CPRI1},
+	[32] = {PCIE1, PCIE2, SGMII_TSEC1, SGMII_TSEC2},
+	[33] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1},
+	[34] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1},
+	[35] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1},
+	[36] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1},
+	[37] = {PCIE1, SGMII_TSEC2, CPRI2, CPRI1},
+	[38] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1},
+	[39] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1},
+	[40] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1},
+	[41] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1},
+	[42] = {PCIE1, SGMII_TSEC2, SGMII_TSEC1, CPRI1},
+	[43] = {SGMII_TSEC1, SGMII_TSEC2, CPRI2, CPRI1},
+	[44] = {SGMII_TSEC1, SGMII_TSEC2, CPRI2, CPRI1},
+	[45] = {SGMII_TSEC1, SGMII_TSEC2, CPRI2, CPRI1},
+	[46] = {SGMII_TSEC1, SGMII_TSEC2, CPRI2, CPRI1},
+	[47] = {SGMII_TSEC1, SGMII_TSEC2, CPRI2, CPRI1},
+};
+
+int is_serdes_configured(enum srds_prtcl prtcl)
+{
+	return (1 << prtcl) & serdes1_prtcl_map;
+}
+
+void fsl_serdes_init(void)
+{
+	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	u32 pordevsr = in_be32(&gur->pordevsr);
+	u32 srds_cfg = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >>
+				MPC85xx_PORDEVSR_IO_SEL_SHIFT;
+	int lane;
+
+	debug("PORDEVSR[IO_SEL_SRDS] = %x\n", srds_cfg);
+
+	if (srds_cfg >= ARRAY_SIZE(serdes1_cfg_tbl)) {
+		printf("Invalid PORDEVSR[IO_SEL_SRDS] = %d\n", srds_cfg);
+		return;
+	}
+
+	for (lane = 0; lane < SRDS1_MAX_LANES; lane++) {
+		enum srds_prtcl lane_prtcl = serdes1_cfg_tbl[srds_cfg][lane];
+		serdes1_prtcl_map |= (1 << lane_prtcl);
+	}
+}
diff --git a/arch/powerpc/cpu/mpc8xxx/cpu.c b/arch/powerpc/cpu/mpc8xxx/cpu.c
index e8613be393..ab454f50db 100644
--- a/arch/powerpc/cpu/mpc8xxx/cpu.c
+++ b/arch/powerpc/cpu/mpc8xxx/cpu.c
@@ -86,6 +86,8 @@ static struct cpu_type cpu_type_list[] = {
 	CPU_TYPE_ENTRY(B4220, B4220, 0),
 	CPU_TYPE_ENTRY(BSC9130, 9130, 1),
 	CPU_TYPE_ENTRY(BSC9131, 9131, 1),
+	CPU_TYPE_ENTRY(BSC9132, 9132, 2),
+	CPU_TYPE_ENTRY(BSC9232, 9232, 2),
 #elif defined(CONFIG_MPC86xx)
 	CPU_TYPE_ENTRY(8610, 8610, 1),
 	CPU_TYPE_ENTRY(8641, 8641, 2),
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index f957fa3758..7943fa442d 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -493,6 +493,21 @@
 #define CONFIG_SYS_FSL_ERRATUM_IFC_A003399
 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
 
+#elif defined(CONFIG_BSC9132)
+#define CONFIG_MAX_CPUS			2
+#define CONFIG_SYS_PPC_E500_DEBUG_TLB	3
+#define CONFIG_FSL_SDHC_V2_3
+#define CONFIG_SYS_FSL_NUM_LAWS		12
+#define CONFIG_TSECV2
+#define CONFIG_SYS_FSL_SEC_COMPAT	4
+#define CONFIG_NUM_DDR_CONTROLLERS	2
+#define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000
+#define CONFIG_NAND_FSL_IFC
+#define CONFIG_SYS_FSL_ERRATUM_IFC_A003399
+#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
+#define CONFIG_SYS_FSL_ESDHC_P1010_BROKEN_SDCLK
+#define CONFIG_SYS_FSL_PCIE_COMPAT	"fsl,qoriq-pcie-v2.2"
+
 #elif defined(CONFIG_PPC_T4240)
 #define CONFIG_SYS_PPC64		/* 64-bit core */
 #define CONFIG_FSL_CORENET		/* Freescale CoreNet platform */
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index 6a818c4ba1..67b1a44ab8 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -2150,7 +2150,7 @@ typedef struct ccsr_gur {
 #define MPC85xx_PORPLLSR_DDR_RATIO	0x3e000000
 #define MPC85xx_PORPLLSR_DDR_RATIO_SHIFT	25
 #else
-#ifdef CONFIG_BSC9131
+#if defined(CONFIG_BSC9131) || defined(CONFIG_BSC9132)
 #define MPC85xx_PORPLLSR_DDR_RATIO	0x00003f00
 #else
 #define MPC85xx_PORPLLSR_DDR_RATIO	0x00003e00
@@ -2164,6 +2164,11 @@ typedef struct ccsr_gur {
 	u32	porbmsr;	/* POR boot mode status */
 #define MPC85xx_PORBMSR_HA		0x00070000
 #define MPC85xx_PORBMSR_HA_SHIFT	16
+#define MPC85XX_PORBMSR_ROMLOC_SHIFT	24
+#define PORBMSR_ROMLOC_SPI	0x6
+#define PORBMSR_ROMLOC_SDHC	0x7
+#define PORBMSR_ROMLOC_NAND_2K	0x9
+#define PORBMSR_ROMLOC_NOR	0xf
 	u32	porimpscr;	/* POR I/O impedance status & control */
 	u32	pordevsr;	/* POR I/O device status regsiter */
 #if defined(CONFIG_P1017) || defined(CONFIG_P1023)
@@ -2188,6 +2193,9 @@ typedef struct ccsr_gur {
 #if defined(CONFIG_P1010)
 #define MPC85xx_PORDEVSR_IO_SEL		0x00600000
 #define MPC85xx_PORDEVSR_IO_SEL_SHIFT	21
+#elif defined(CONFIG_BSC9132)
+#define MPC85xx_PORDEVSR_IO_SEL		0x00FE0000
+#define MPC85xx_PORDEVSR_IO_SEL_SHIFT	17
 #else
 #define MPC85xx_PORDEVSR_IO_SEL		0x00780000
 #define MPC85xx_PORDEVSR_IO_SEL_SHIFT	19
@@ -2345,6 +2353,10 @@ typedef struct ccsr_gur {
 #define MPC85xx_PMUXCR_SPI1_CS3_dbg_adi2_rxen	0x00000002
 #define MPC85xx_PMUXCR_SPI1_CS3_GPO76		0x00000003
 #endif
+#ifdef CONFIG_BSC9132
+#define MPC85xx_PMUXCR0_SIM_SEL_MASK	0x0003b000
+#define MPC85xx_PMUXCR0_SIM_SEL		0x00014000
+#endif
 	u32	pmuxcr2;	/* Alt. function signal multiplex control 2 */
 #if defined(CONFIG_P1010) || defined(CONFIG_P1014)
 #define MPC85xx_PMUXCR2_UART_GPIO		0x40000000
@@ -2375,6 +2387,7 @@ typedef struct ccsr_gur {
 #define MPC85xx_PMUXCR2_ETSECUSB_MASK	0x001f8000
 #define MPC85xx_PMUXCR2_USB		0x00150000
 #endif
+#if defined(CONFIG_BSC9131) || defined(CONFIG_BSC9132)
 #if defined(CONFIG_BSC9131)
 #define MPC85xx_PMUXCR2_UART_CTS_B0_SIM_PD		0X40000000
 #define MPC85xx_PMUXCR2_UART_CTS_B0_DSP_TMS		0X80000000
@@ -2418,8 +2431,9 @@ typedef struct ccsr_gur {
 #define MPC85xx_PMUXCR2_ANT3_AGC_GPO53			0x00000004
 #define MPC85xx_PMUXCR2_ANT3_DO_TDM			0x00000001
 #define MPC85xx_PMUXCR2_ANT3_DO_GPIO46_49		0x00000002
+#endif
 	u32	pmuxcr3;
-
+#if defined(CONFIG_BSC9131)
 #define MPC85xx_PMUXCR3_ANT3_DO4_5_TDM			0x40000000
 #define MPC85xx_PMUXCR3_ANT3_DO4_5_GPIO_50_51		0x80000000
 #define MPC85xx_PMUXCR3_ANT3_DO6_7_TRIG_IN_SRESET_B	0x10000000
@@ -2434,6 +2448,13 @@ typedef struct ccsr_gur {
 #define MPC85xx_PMUXCR3_SPI2_CS3_GPO94			0x00040000
 #define MPC85xx_PMUXCR3_ANT2_AGC_RSVD			0x00010000
 #define MPC85xx_PMUXCR3_ANT2_GPO89			0x00030000
+#endif
+#ifdef CONFIG_BSC9132
+#define MPC85xx_PMUXCR3_USB_SEL_MASK	0x0000ff00
+#define MPC85xx_PMUXCR3_UART2_SEL	0x00005000
+#define MPC85xx_PMUXCR3_UART3_SEL_MASK	0xc0000000
+#define MPC85xx_PMUXCR3_UART3_SEL	0x40000000
+#endif
 	u32 pmuxcr4;
 #else
 	u8	res6[8];
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index 19fe250305..8c91f0849b 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -1113,6 +1113,8 @@
 
 #define SVR_9130	0x860001
 #define SVR_9131	0x860000
+#define SVR_9132	0x861000
+#define SVR_9232	0x861400
 
 #define SVR_Unknown	0xFFFFFF