summaryrefslogtreecommitdiffstats
path: root/arch/powerpc
diff options
context:
space:
mode:
authorYork Sun <yorksun@freescale.com>2014-08-01 15:51:00 -0700
committerYork Sun <yorksun@freescale.com>2014-09-25 08:36:18 -0700
commit1d71efbb0345ff3a8ac45e62bef36813abe1703e (patch)
treef607e330c200428f1e37a1fd3aba8873efdbb634 /arch/powerpc
parente211c12e773881f6bef60143df4764402a56de34 (diff)
downloadblackbird-obmc-uboot-1d71efbb0345ff3a8ac45e62bef36813abe1703e.tar.gz
blackbird-obmc-uboot-1d71efbb0345ff3a8ac45e62bef36813abe1703e.zip
driver/ddr: Restruct driver to allow standalone memory space
U-boot has been initializing DDR for the main memory. The presumption is the memory stays as a big continuous block, either linear or interleaved. This change is to support putting some DDR controllers to separated space without counting into main memory. The standalone memory controller could use different number of DIMM slots. Signed-off-by: York Sun <yorksun@freescale.com>
Diffstat (limited to 'arch/powerpc')
-rw-r--r--arch/powerpc/cpu/mpc85xx/cpu.c4
1 files changed, 2 insertions, 2 deletions
diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c
index 6274f929dd..3d6ec843df 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu.c
@@ -441,7 +441,7 @@ phys_size_t initdram(int board_type)
/* Board-specific functions defined in each board's ddr.c */
void fsl_ddr_get_spd(generic_spd_eeprom_t *ctrl_dimms_spd,
- unsigned int ctrl_num);
+ unsigned int ctrl_num, unsigned int dimm_slots_per_ctrl);
void read_tlbcam_entry(int idx, u32 *valid, u32 *tsize, unsigned long *epn,
phys_addr_t *rpn);
unsigned int
@@ -459,7 +459,7 @@ static void dump_spd_ddr_reg(void)
spd[CONFIG_NUM_DDR_CONTROLLERS][CONFIG_DIMM_SLOTS_PER_CTLR];
for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++)
- fsl_ddr_get_spd(spd[i], i);
+ fsl_ddr_get_spd(spd[i], i, CONFIG_DIMM_SLOTS_PER_CTLR);
puts("SPD data of all dimms (zero vaule is omitted)...\n");
puts("Byte (hex) ");
OpenPOWER on IntegriCloud