ppc: Move brg_clk to arch_global_data

Move this field into arch_global_data and tidy up.

Signed-off-by: Simon Glass <sjg@chromium.org>

8 files changed, 12 insertions, 11 deletions

diff --git a/arch/powerpc/cpu/mpc8260/commproc.c b/arch/powerpc/cpu/mpc8260/commproc.c
index 082957ee08..e5bfed1324 100644
--- a/arch/powerpc/cpu/mpc8260/commproc.c
+++ b/arch/powerpc/cpu/mpc8260/commproc.c
@@ -101,7 +101,7 @@ m8260_cpm_hostalloc(uint size, uint align)
  * Baud rate clocks are zero-based in the driver code (as that maps
  * to port numbers).  Documentation uses 1-based numbering.
  */
-#define BRG_INT_CLK	gd->brg_clk
+#define BRG_INT_CLK	gd->arch.brg_clk
 #define BRG_UART_CLK	(BRG_INT_CLK / 16)
 
 /* This function is used by UARTs, or anything else that uses a 16x
diff --git a/arch/powerpc/cpu/mpc8260/i2c.c b/arch/powerpc/cpu/mpc8260/i2c.c
index 7382cbadc7..b720b1fb88 100644
--- a/arch/powerpc/cpu/mpc8260/i2c.c
+++ b/arch/powerpc/cpu/mpc8260/i2c.c
@@ -259,7 +259,7 @@ void i2c_init(int speed, int slaveadd)
 	 * divide BRGCLK by 1)
 	 */
 	debug("[I2C] Setting rate...\n");
-	i2c_setrate(gd->brg_clk, CONFIG_SYS_I2C_SPEED);
+	i2c_setrate(gd->arch.brg_clk, CONFIG_SYS_I2C_SPEED);
 
 	/* Set I2C controller in master mode */
 	i2c->i2c_i2com = 0x01;
diff --git a/arch/powerpc/cpu/mpc8260/speed.c b/arch/powerpc/cpu/mpc8260/speed.c
index bb50dee960..4ad1ec24c3 100644
--- a/arch/powerpc/cpu/mpc8260/speed.c
+++ b/arch/powerpc/cpu/mpc8260/speed.c
@@ -145,7 +145,7 @@ int get_clocks (void)
 	gd->cpm_clk = gd->vco_out / 2;
 	gd->bus_clk = clkin;
 	gd->scc_clk = gd->vco_out / 4;
-	gd->brg_clk = gd->vco_out / (1 << (2 * (dfbrg + 1)));
+	gd->arch.brg_clk = gd->vco_out / (1 << (2 * (dfbrg + 1)));
 
 	if (cp->b2c_mult > 0) {
 		gd->cpu_clk = (clkin * cp->b2c_mult) / 2;
@@ -231,7 +231,7 @@ int prt_8260_clks (void)
 			plldf, pllmf, pcidf);
 
 	printf (" - vco_out %10ld, scc_clk %10ld, brg_clk %10ld\n",
-			gd->vco_out, gd->scc_clk, gd->brg_clk);
+			gd->vco_out, gd->scc_clk, gd->arch.brg_clk);
 
 	printf (" - cpu_clk %10ld, cpm_clk %10ld, bus_clk %10ld\n",
 			gd->cpu_clk, gd->cpm_clk, gd->bus_clk);
diff --git a/arch/powerpc/cpu/mpc83xx/speed.c b/arch/powerpc/cpu/mpc83xx/speed.c
index b8c05d1592..21e8b0ab50 100644
--- a/arch/powerpc/cpu/mpc83xx/speed.c
+++ b/arch/powerpc/cpu/mpc83xx/speed.c
@@ -496,7 +496,7 @@ int get_clocks(void)
 #endif
 #if defined(CONFIG_QE)
 	gd->qe_clk = qe_clk;
-	gd->brg_clk = brg_clk;
+	gd->arch.brg_clk = brg_clk;
 #endif
 #if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \
 	defined(CONFIG_MPC837x)
@@ -540,7 +540,8 @@ static int do_clocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	printf("  Coherent System Bus: %-4s MHz\n", strmhz(buf, gd->csb_clk));
 #if defined(CONFIG_QE)
 	printf("  QE:                  %-4s MHz\n", strmhz(buf, gd->qe_clk));
-	printf("  BRG:                 %-4s MHz\n", strmhz(buf, gd->brg_clk));
+	printf("  BRG:                 %-4s MHz\n",
+	       strmhz(buf, gd->arch.brg_clk));
 #endif
 	printf("  Local Bus Controller:%-4s MHz\n", strmhz(buf, gd->lbiu_clk));
 	printf("  Local Bus:           %-4s MHz\n", strmhz(buf, gd->lclk_clk));
diff --git a/arch/powerpc/cpu/mpc85xx/commproc.c b/arch/powerpc/cpu/mpc85xx/commproc.c
index 292b723dcd..7f10476a3a 100644
--- a/arch/powerpc/cpu/mpc85xx/commproc.c
+++ b/arch/powerpc/cpu/mpc85xx/commproc.c
@@ -110,7 +110,7 @@ m8560_cpm_hostalloc(uint size, uint align)
  * Baud rate clocks are zero-based in the driver code (as that maps
  * to port numbers).  Documentation uses 1-based numbering.
  */
-#define BRG_INT_CLK	gd->brg_clk
+#define BRG_INT_CLK	gd->arch.brg_clk
 #define BRG_UART_CLK	((BRG_INT_CLK + 15) / 16)
 
 /* This function is used by UARTS, or anything else that uses a 16x
diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c
index 801ee078c0..8a581ef76b 100644
--- a/arch/powerpc/cpu/mpc85xx/speed.c
+++ b/arch/powerpc/cpu/mpc85xx/speed.c
@@ -395,7 +395,7 @@ int get_clocks (void)
 
 #ifdef CONFIG_QE
 	gd->qe_clk = sys_info.freqQE;
-	gd->brg_clk = gd->qe_clk / 2;
+	gd->arch.brg_clk = gd->qe_clk / 2;
 #endif
 	/*
 	 * The base clock for I2C depends on the actual SOC.  Unfortunately,
@@ -438,7 +438,7 @@ int get_clocks (void)
 	gd->vco_out = 2*sys_info.freqSystemBus;
 	gd->cpm_clk = gd->vco_out / 2;
 	gd->scc_clk = gd->vco_out / 4;
-	gd->brg_clk = gd->vco_out / (1 << (2 * (dfbrg + 1)));
+	gd->arch.brg_clk = gd->vco_out / (1 << (2 * (dfbrg + 1)));
 #endif
 
 	if(gd->cpu_clk != 0) return (0);
diff --git a/arch/powerpc/cpu/mpc8xx/fdt.c b/arch/powerpc/cpu/mpc8xx/fdt.c
index 7130983ff2..7edd7e4204 100644
--- a/arch/powerpc/cpu/mpc8xx/fdt.c
+++ b/arch/powerpc/cpu/mpc8xx/fdt.c
@@ -37,7 +37,7 @@ void ft_cpu_setup(void *blob, bd_t *bd)
 	do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
 		"clock-frequency", bd->bi_intfreq, 1);
 	do_fixup_by_compat_u32(blob, "fsl,cpm-brg", "clock-frequency",
-		gd->brg_clk, 1);
+		gd->arch.brg_clk, 1);
 
 	/* Fixup ethernet MAC addresses */
 	fdt_fixup_ethernet(blob);
diff --git a/arch/powerpc/cpu/mpc8xx/speed.c b/arch/powerpc/cpu/mpc8xx/speed.c
index 6e13e5de02..091b49f24a 100644
--- a/arch/powerpc/cpu/mpc8xx/speed.c
+++ b/arch/powerpc/cpu/mpc8xx/speed.c
@@ -192,7 +192,7 @@ void get_brgclk(uint sccr)
 			divider = 64;
 			break;
 	}
-	gd->brg_clk = gd->cpu_clk/divider;
+	gd->arch.brg_clk = gd->cpu_clk/divider;
 }
 
 #if !defined(CONFIG_8xx_CPUCLK_DEFAULT)