Merge branch 'master' of git://git.denx.de/u-boot-arm

85 files changed, 872 insertions, 2316 deletions

diff --git a/arch/arm/config.mk b/arch/arm/config.mk
index e7839beced..461899eabc 100644
--- a/arch/arm/config.mk
+++ b/arch/arm/config.mk
@@ -87,9 +87,7 @@ endif
 endif
 
 # needed for relocation
-ifndef CONFIG_NAND_SPL
 LDFLAGS_u-boot += -pie
-endif
 
 #
 # FIXME: binutils versions < 2.22 have a bug in the assembler where
diff --git a/arch/arm/cpu/arm1136/config.mk b/arch/arm/cpu/arm1136/config.mk
index 9092d914f6..797d1229fe 100644
--- a/arch/arm/cpu/arm1136/config.mk
+++ b/arch/arm/cpu/arm1136/config.mk
@@ -31,6 +31,13 @@ PLATFORM_CPPFLAGS += -march=armv5
 # =========================================================================
 PF_RELFLAGS_SLB_AT := $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,))
 PLATFORM_RELFLAGS += $(PF_RELFLAGS_SLB_AT)
+
+ifneq ($(CONFIG_IMX_CONFIG),)
+ifdef CONFIG_SPL
 ifdef CONFIG_SPL_BUILD
 ALL-y	+= $(OBJTREE)/SPL
 endif
+else
+ALL-y	+= $(obj)u-boot.imx
+endif
+endif
diff --git a/arch/arm/cpu/arm1136/omap24xx/timer.c b/arch/arm/cpu/arm1136/omap24xx/timer.c
index 53015cb77d..3b6666b791 100644
--- a/arch/arm/cpu/arm1136/omap24xx/timer.c
+++ b/arch/arm/cpu/arm1136/omap24xx/timer.c
@@ -31,13 +31,16 @@
  */
 
 #include <common.h>
+#include <asm/io.h>
 #include <asm/arch/bits.h>
 #include <asm/arch/omap2420.h>
 
+#define TIMER_CLOCK	(CONFIG_SYS_CLK_FREQ / (2 << CONFIG_SYS_PTV))
 #define TIMER_LOAD_VAL 0
 
 /* macro to read the 32 bit timer */
-#define READ_TIMER (*((volatile ulong *)(CONFIG_SYS_TIMERBASE+TCRR)))
+#define READ_TIMER	readl(CONFIG_SYS_TIMERBASE+TCRR) \
+			/ (TIMER_CLOCK / CONFIG_SYS_HZ)
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -99,7 +102,8 @@ ulong get_timer_masked (void)
 		gd->arch.tbl += (now - gd->arch.lastinc);
 	} else {
 		/* we have rollover of incrementer */
-		gd->arch.tbl += (0xFFFFFFFF - gd->arch.lastinc) + now;
+		gd->arch.tbl += ((0xFFFFFFFF / (TIMER_CLOCK / CONFIG_SYS_HZ))
+				 - gd->arch.lastinc) + now;
 	}
 	gd->arch.lastinc = now;
 	return gd->arch.tbl;
diff --git a/arch/arm/cpu/arm1136/start.S b/arch/arm/cpu/arm1136/start.S
index eba23248d5..ccea2d5cb4 100644
--- a/arch/arm/cpu/arm1136/start.S
+++ b/arch/arm/cpu/arm1136/start.S
@@ -88,7 +88,11 @@ _end_vect:
 
 .globl _TEXT_BASE
 _TEXT_BASE:
+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE)
+	.word	CONFIG_SPL_TEXT_BASE
+#else
 	.word	CONFIG_SYS_TEXT_BASE
+#endif
 
 /*
  * These are defined in the board-specific linker script.
@@ -100,9 +104,9 @@ _TEXT_BASE:
 _bss_start_ofs:
 	.word __bss_start - _start
 
-.global	_image_copy_end_ofs
+.globl _image_copy_end_ofs
 _image_copy_end_ofs:
-	.word 	__image_copy_end - _start
+	.word __image_copy_end - _start
 
 .globl _bss_end_ofs
 _bss_end_ofs:
@@ -170,29 +174,24 @@ next:
 /*------------------------------------------------------------------------------*/
 
 /*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
+ * void relocate_code(addr_moni)
  *
+ * This function relocates the monitor code.
  */
 	.globl	relocate_code
 relocate_code:
-	mov	r4, r0	/* save addr_sp */
-	mov	r5, r1	/* save addr of gd */
-	mov	r6, r2	/* save addr of destination */
+	mov	r6, r0	/* save addr of destination */
 
 	adr	r0, _start
-	cmp	r0, r6
-	moveq	r9, #0		/* no relocation. relocation offset(r9) = 0 */
+	subs	r9, r6, r0		/* r9 <- relocation offset */
 	beq	relocate_done		/* skip relocation */
 	mov	r1, r6			/* r1 <- scratch for copy_loop */
 	ldr	r3, _image_copy_end_ofs
 	add	r2, r0, r3		/* r2 <- source end address	    */
 
 copy_loop:
-	ldmia	r0!, {r9-r10}		/* copy from source address [r0]    */
-	stmia	r1!, {r9-r10}		/* copy to   target address [r1]    */
+	ldmia	r0!, {r10-r11}		/* copy from source address [r0]    */
+	stmia	r1!, {r10-r11}		/* copy to   target address [r1]    */
 	cmp	r0, r2			/* until source end address [r2]    */
 	blo	copy_loop
 
@@ -201,7 +200,6 @@ copy_loop:
 	 * fix .rel.dyn relocations
 	 */
 	ldr	r0, _TEXT_BASE		/* r0 <- Text base */
-	sub	r9, r6, r0		/* r9 <- relocation offset */
 	ldr	r10, _dynsym_start_ofs	/* r10 <- sym table ofs */
 	add	r10, r10, r0		/* r10 <- sym table in FLASH */
 	ldr	r2, _rel_dyn_start_ofs	/* r2 <- rel dyn start ofs */
@@ -235,8 +233,6 @@ fixnext:
 	add	r2, r2, #8		/* each rel.dyn entry is 8 bytes */
 	cmp	r2, r3
 	blo	fixloop
-	bx	lr
-
 #endif
 
 relocate_done:
@@ -392,8 +388,9 @@ cpu_init_crit:
 	str	r0, [r13]			@ save R0's value.
 	ldr	r0, IRQ_STACK_START_IN		@ get data regions start
 	str	lr, [r0]			@ save caller lr in position 0 of saved stack
-	mrs	r0, spsr			@ get the spsr
+	mrs	lr, spsr			@ get the spsr
 	str	lr, [r0, #4]			@ save spsr in position 1 of saved stack
+	ldr	lr, [r0]			@ restore lr
 	ldr	r0, [r13]			@ restore r0
 	add	r13, r13, #4			@ pop stack entry
 	.endm
diff --git a/arch/arm/cpu/arm1136/u-boot-spl.lds b/arch/arm/cpu/arm1136/u-boot-spl.lds
index b09b4ebfaf..8296e5db56 100644
--- a/arch/arm/cpu/arm1136/u-boot-spl.lds
+++ b/arch/arm/cpu/arm1136/u-boot-spl.lds
@@ -38,7 +38,7 @@ SECTIONS
 	.text      :
 	{
 	__start = .;
-	  arch/arm/cpu/arm1136/start.o	(.text)
+	  arch/arm/cpu/arm1136/start.o	(.text*)
 	  *(.text*)
 	} >.sram
 
diff --git a/arch/arm/cpu/arm1176/bcm2835/timer.c b/arch/arm/cpu/arm1176/bcm2835/timer.c
index d232d7e067..2edd6711da 100644
--- a/arch/arm/cpu/arm1176/bcm2835/timer.c
+++ b/arch/arm/cpu/arm1176/bcm2835/timer.c
@@ -23,7 +23,7 @@ int timer_init(void)
 	return 0;
 }
 
-ulong get_timer(ulong base)
+ulong get_timer_us(ulong base)
 {
 	struct bcm2835_timer_regs *regs =
 		(struct bcm2835_timer_regs *)BCM2835_TIMER_PHYSADDR;
@@ -31,6 +31,14 @@ ulong get_timer(ulong base)
 	return readl(&regs->clo) - base;
 }
 
+ulong get_timer(ulong base)
+{
+	ulong us = get_timer_us(0);
+	us /= (1000000 / CONFIG_SYS_HZ);
+	us -= base;
+	return us;
+}
+
 unsigned long long get_ticks(void)
 {
 	return get_timer(0);
@@ -46,10 +54,10 @@ void __udelay(unsigned long usec)
 	ulong endtime;
 	signed long diff;
 
-	endtime = get_timer(0) + usec;
+	endtime = get_timer_us(0) + usec;
 
 	do {
-		ulong now = get_timer(0);
+		ulong now = get_timer_us(0);
 		diff = endtime - now;
 	} while (diff >= 0);
 }
diff --git a/arch/arm/cpu/arm1176/s3c64xx/Makefile b/arch/arm/cpu/arm1176/s3c64xx/Makefile
deleted file mode 100644
index 266a0739ce..0000000000
--- a/arch/arm/cpu/arm1176/s3c64xx/Makefile
+++ /dev/null
@@ -1,50 +0,0 @@
-#
-# (C) Copyright 2000-2003
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2008
-# Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(SOC).o
-
-SOBJS	= reset.o
-
-COBJS-$(CONFIG_S3C6400)	+= cpu_init.o speed.o
-COBJS-y	+= timer.o init.o
-
-OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS-y))
-
-all:	$(obj).depend $(START) $(LIB)
-
-$(LIB):	$(OBJS)
-	$(call cmd_link_o_target, $(OBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/arch/arm/cpu/arm1176/s3c64xx/config.mk b/arch/arm/cpu/arm1176/s3c64xx/config.mk
deleted file mode 100644
index 222d352b3a..0000000000
--- a/arch/arm/cpu/arm1176/s3c64xx/config.mk
+++ /dev/null
@@ -1,34 +0,0 @@
-#
-# (C) Copyright 2002
-# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-PLATFORM_RELFLAGS += -fno-common -ffixed-r8 -msoft-float
-
-# Make ARMv5 to allow more compilers to work, even though its v6.
-PLATFORM_CPPFLAGS += -march=armv5t
-# =========================================================================
-#
-# Supply options according to compiler version
-#
-# =========================================================================
-PF_RELFLAGS_SLB_AT := $(call cc-option,-mshort-load-bytes,\
-			$(call cc-option,-malignment-traps,))
-PLATFORM_RELFLAGS += $(PF_RELFLAGS_SLB_AT)
diff --git a/arch/arm/cpu/arm1176/s3c64xx/cpu_init.S b/arch/arm/cpu/arm1176/s3c64xx/cpu_init.S
deleted file mode 100644
index df88cba342..0000000000
--- a/arch/arm/cpu/arm1176/s3c64xx/cpu_init.S
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * Originates from Samsung's u-boot 1.1.6 port to S3C6400 / SMDK6400
- *
- * Copyright (C) 2008
- * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <asm/arch/s3c6400.h>
-
-	.globl mem_ctrl_asm_init
-mem_ctrl_asm_init:
-	/* DMC1 base address 0x7e001000 */
-	ldr	r0, =ELFIN_DMC1_BASE
-
-	ldr	r1, =0x4
-	str	r1, [r0, #INDEX_DMC_MEMC_CMD]
-
-	ldr	r1, =DMC_DDR_REFRESH_PRD
-	str	r1, [r0, #INDEX_DMC_REFRESH_PRD]
-
-	ldr	r1, =DMC_DDR_CAS_LATENCY
-	str	r1, [r0, #INDEX_DMC_CAS_LATENCY]
-
-	ldr	r1, =DMC_DDR_t_DQSS
-	str	r1, [r0, #INDEX_DMC_T_DQSS]
-
-	ldr	r1, =DMC_DDR_t_MRD
-	str	r1, [r0, #INDEX_DMC_T_MRD]
-
-	ldr	r1, =DMC_DDR_t_RAS
-	str	r1, [r0, #INDEX_DMC_T_RAS]
-
-	ldr	r1, =DMC_DDR_t_RC
-	str	r1, [r0, #INDEX_DMC_T_RC]
-
-	ldr	r1, =DMC_DDR_t_RCD
-	ldr	r2, =DMC_DDR_schedule_RCD
-	orr	r1, r1, r2
-	str	r1, [r0, #INDEX_DMC_T_RCD]
-
-	ldr	r1, =DMC_DDR_t_RFC
-	ldr	r2, =DMC_DDR_schedule_RFC
-	orr	r1, r1, r2
-	str	r1, [r0, #INDEX_DMC_T_RFC]
-
-	ldr	r1, =DMC_DDR_t_RP
-	ldr	r2, =DMC_DDR_schedule_RP
-	orr	r1, r1, r2
-	str	r1, [r0, #INDEX_DMC_T_RP]
-
-	ldr	r1, =DMC_DDR_t_RRD
-	str	r1, [r0, #INDEX_DMC_T_RRD]
-
-	ldr	r1, =DMC_DDR_t_WR
-	str	r1, [r0, #INDEX_DMC_T_WR]
-
-	ldr	r1, =DMC_DDR_t_WTR
-	str	r1, [r0, #INDEX_DMC_T_WTR]
-
-	ldr	r1, =DMC_DDR_t_XP
-	str	r1, [r0, #INDEX_DMC_T_XP]
-
-	ldr	r1, =DMC_DDR_t_XSR
-	str	r1, [r0, #INDEX_DMC_T_XSR]
-
-	ldr	r1, =DMC_DDR_t_ESR
-	str	r1, [r0, #INDEX_DMC_T_ESR]
-
-	ldr	r1, =DMC1_MEM_CFG
-	str	r1, [r0, #INDEX_DMC_MEMORY_CFG]
-
-	ldr	r1, =DMC1_MEM_CFG2
-	str	r1, [r0, #INDEX_DMC_MEMORY_CFG2]
-
-	ldr	r1, =DMC1_CHIP0_CFG
-	str	r1, [r0, #INDEX_DMC_CHIP_0_CFG]
-
-	ldr	r1, =DMC_DDR_32_CFG
-	str	r1, [r0, #INDEX_DMC_USER_CONFIG]
-
-	/* DMC0 DDR Chip 0 configuration direct command reg */
-	ldr	r1, =DMC_NOP0
-	str	r1, [r0, #INDEX_DMC_DIRECT_CMD]
-
-	/* Precharge All */
-	ldr	r1, =DMC_PA0
-	str	r1, [r0, #INDEX_DMC_DIRECT_CMD]
-
-	/* Auto Refresh 2 time */
-	ldr	r1, =DMC_AR0
-	str	r1, [r0, #INDEX_DMC_DIRECT_CMD]
-	str	r1, [r0, #INDEX_DMC_DIRECT_CMD]
-
-	/* MRS */
-	ldr	r1, =DMC_mDDR_EMR0
-	str	r1, [r0, #INDEX_DMC_DIRECT_CMD]
-
-	/* Mode Reg */
-	ldr	r1, =DMC_mDDR_MR0
-	str	r1, [r0, #INDEX_DMC_DIRECT_CMD]
-
-	/* Enable DMC1 */
-	mov	r1, #0x0
-	str	r1, [r0, #INDEX_DMC_MEMC_CMD]
-
-check_dmc1_ready:
-	ldr	r1, [r0, #INDEX_DMC_MEMC_STATUS]
-	mov	r2, #0x3
-	and	r1, r1, r2
-	cmp	r1, #0x1
-	bne	check_dmc1_ready
-	nop
-
-	mov	pc, lr
-
-	.ltorg
diff --git a/arch/arm/cpu/arm1176/s3c64xx/init.c b/arch/arm/cpu/arm1176/s3c64xx/init.c
deleted file mode 100644
index f113d8ed41..0000000000
--- a/arch/arm/cpu/arm1176/s3c64xx/init.c
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * (C) Copyright 2012 Ashok Kumar Reddy Kourla
- * ashokkourla2000@gmail.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include<common.h>
-
-int arch_cpu_init(void)
-{
-	icache_enable();
-
-	return 0;
-}
diff --git a/arch/arm/cpu/arm1176/s3c64xx/speed.c b/arch/arm/cpu/arm1176/s3c64xx/speed.c
deleted file mode 100644
index 11962acade..0000000000
--- a/arch/arm/cpu/arm1176/s3c64xx/speed.c
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
- * (C) Copyright 2001-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2002
- * David Mueller, ELSOFT AG, d.mueller@elsoft.ch
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * This code should work for both the S3C2400 and the S3C2410
- * as they seem to have the same PLL and clock machinery inside.
- * The different address mapping is handled by the s3c24xx.h files below.
- */
-
-#include <common.h>
-#include <asm/arch/s3c6400.h>
-
-#define APLL 0
-#define MPLL 1
-#define EPLL 2
-
-/* ------------------------------------------------------------------------- */
-/*
- * NOTE: This describes the proper use of this file.
- *
- * CONFIG_SYS_CLK_FREQ should be defined as the input frequency of the PLL.
- *
- * get_FCLK(), get_HCLK(), get_PCLK() and get_UCLK() return the clock of
- * the specified bus in HZ.
- */
-/* ------------------------------------------------------------------------- */
-
-static ulong get_PLLCLK(int pllreg)
-{
-	ulong r, m, p, s;
-
-	switch (pllreg) {
-	case APLL:
-		r = APLL_CON_REG;
-		break;
-	case MPLL:
-		r = MPLL_CON_REG;
-		break;
-	case EPLL:
-		r = EPLL_CON0_REG;
-		break;
-	default:
-		hang();
-	}
-
-	m = (r >> 16) & 0x3ff;
-	p = (r >> 8) & 0x3f;
-	s = r & 0x7;
-
-	return m * (CONFIG_SYS_CLK_FREQ / (p * (1 << s)));
-}
-
-/* return ARMCORE frequency */
-ulong get_ARMCLK(void)
-{
-	ulong div;
-
-	div = CLK_DIV0_REG;
-
-	return get_PLLCLK(APLL) / ((div & 0x7) + 1);
-}
-
-/* return FCLK frequency */
-ulong get_FCLK(void)
-{
-	return get_PLLCLK(APLL);
-}
-
-/* return HCLK frequency */
-ulong get_HCLK(void)
-{
-	ulong fclk;
-
-	uint hclkx2_div = ((CLK_DIV0_REG >> 9) & 0x7) + 1;
-	uint hclk_div = ((CLK_DIV0_REG >> 8) & 0x1) + 1;
-
-	/*
-	 * Bit 7 exists on s3c6410, and not on s3c6400, it is reserved on
-	 * s3c6400 and is always 0, and it is indeed running in ASYNC mode
-	 */
-	if (OTHERS_REG & 0x80)
-		fclk = get_FCLK();		/* SYNC Mode	*/
-	else
-		fclk = get_PLLCLK(MPLL);	/* ASYNC Mode	*/
-
-	return fclk / (hclk_div * hclkx2_div);
-}
-
-/* return PCLK frequency */
-ulong get_PCLK(void)
-{
-	ulong fclk;
-	uint hclkx2_div = ((CLK_DIV0_REG >> 9) & 0x7) + 1;
-	uint pre_div = ((CLK_DIV0_REG >> 12) & 0xf) + 1;
-
-	if (OTHERS_REG & 0x80)
-		fclk = get_FCLK();		/* SYNC Mode	*/
-	else
-		fclk = get_PLLCLK(MPLL);	/* ASYNC Mode	*/
-
-	return fclk / (hclkx2_div * pre_div);
-}
-
-/* return UCLK frequency */
-ulong get_UCLK(void)
-{
-	return get_PLLCLK(EPLL);
-}
-
-int print_cpuinfo(void)
-{
-	printf("\nCPU:     S3C6400@%luMHz\n", get_ARMCLK() / 1000000);
-	printf("         Fclk = %luMHz, Hclk = %luMHz, Pclk = %luMHz ",
-	       get_FCLK() / 1000000, get_HCLK() / 1000000,
-	       get_PCLK() / 1000000);
-
-	if (OTHERS_REG & 0x80)
-		printf("(SYNC Mode) \n");
-	else
-		printf("(ASYNC Mode) \n");
-	return 0;
-}
diff --git a/arch/arm/cpu/arm1176/s3c64xx/timer.c b/arch/arm/cpu/arm1176/s3c64xx/timer.c
deleted file mode 100644
index f16a37b53c..0000000000
--- a/arch/arm/cpu/arm1176/s3c64xx/timer.c
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
- * (C) Copyright 2003
- * Texas Instruments <www.ti.com>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * (C) Copyright 2002-2004
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * (C) Copyright 2004
- * Philippe Robin, ARM Ltd. <philippe.robin@arm.com>
- *
- * (C) Copyright 2008
- * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/proc-armv/ptrace.h>
-#include <asm/arch/s3c6400.h>
-#include <div64.h>
-
-static ulong timer_load_val;
-
-#define PRESCALER	167
-
-static s3c64xx_timers *s3c64xx_get_base_timers(void)
-{
-	return (s3c64xx_timers *)ELFIN_TIMER_BASE;
-}
-
-/* macro to read the 16 bit timer */
-static inline ulong read_timer(void)
-{
-	s3c64xx_timers *const timers = s3c64xx_get_base_timers();
-
-	return timers->TCNTO4;
-}
-
-/* Internal tick units */
-/* Last decremneter snapshot */
-static unsigned long lastdec;
-/* Monotonic incrementing timer */
-static unsigned long long timestamp;
-
-int timer_init(void)
-{
-	s3c64xx_timers *const timers = s3c64xx_get_base_timers();
-
-	/* use PWM Timer 4 because it has no output */
-	/*
-	 * We use the following scheme for the timer:
-	 * Prescaler is hard fixed at 167, divider at 1/4.
-	 * This gives at PCLK frequency 66MHz approx. 10us ticks
-	 * The timer is set to wrap after 100s, at 66MHz this obviously
-	 * happens after 10,000,000 ticks. A long variable can thus
-	 * keep values up to 40,000s, i.e., 11 hours. This should be
-	 * enough for most uses:-) Possible optimizations: select a
-	 * binary-friendly frequency, e.g., 1ms / 128. Also calculate
-	 * the prescaler automatically for other PCLK frequencies.
-	 */
-	timers->TCFG0 = PRESCALER << 8;
-	if (timer_load_val == 0) {
-		timer_load_val = get_PCLK() / PRESCALER * (100 / 4); /* 100s */
-		timers->TCFG1 = (timers->TCFG1 & ~0xf0000) | 0x20000;
-	}
-
-	/* load value for 10 ms timeout */
-	lastdec = timers->TCNTB4 = timer_load_val;
-	/* auto load, manual update of Timer 4 */
-	timers->TCON = (timers->TCON & ~0x00700000) | TCON_4_AUTO |
-		TCON_4_UPDATE;
-
-	/* auto load, start Timer 4 */
-	timers->TCON = (timers->TCON & ~0x00700000) | TCON_4_AUTO | COUNT_4_ON;
-	timestamp = 0;
-
-	return 0;
-}
-
-/*
- * timer without interrupts
- */
-
-/*
- * This function is derived from PowerPC code (read timebase as long long).
- * On ARM it just returns the timer value.
- */
-unsigned long long get_ticks(void)
-{
-	ulong now = read_timer();
-
-	if (lastdec >= now) {
-		/* normal mode */
-		timestamp += lastdec - now;
-	} else {
-		/* we have an overflow ... */
-		timestamp += lastdec + timer_load_val - now;
-	}
-	lastdec = now;
-
-	return timestamp;
-}
-
-/*
- * This function is derived from PowerPC code (timebase clock frequency).
- * On ARM it returns the number of timer ticks per second.
- */
-ulong get_tbclk(void)
-{
-	/* We overrun in 100s */
-	return (ulong)(timer_load_val / 100);
-}
-
-ulong get_timer_masked(void)
-{
-	unsigned long long res = get_ticks();
-	do_div (res, (timer_load_val / (100 * CONFIG_SYS_HZ)));
-	return res;
-}
-
-ulong get_timer(ulong base)
-{
-	return get_timer_masked() - base;
-}
-
-void __udelay(unsigned long usec)
-{
-	unsigned long long tmp;
-	ulong tmo;
-
-	tmo = (usec + 9) / 10;
-	tmp = get_ticks() + tmo;	/* get current timestamp */
-
-	while (get_ticks() < tmp)/* loop till event */
-		 /*NOP*/;
-}
diff --git a/arch/arm/cpu/arm1176/start.S b/arch/arm/cpu/arm1176/start.S
index 3c291fbe42..f20da8eb7b 100644
--- a/arch/arm/cpu/arm1176/start.S
+++ b/arch/arm/cpu/arm1176/start.S
@@ -33,11 +33,8 @@
 #include <asm-offsets.h>
 #include <config.h>
 #include <version.h>
-#ifdef CONFIG_ENABLE_MMU
-#include <asm/proc/domain.h>
-#endif
 
-#if !defined(CONFIG_ENABLE_MMU) && !defined(CONFIG_SYS_PHY_UBOOT_BASE)
+#ifndef CONFIG_SYS_PHY_UBOOT_BASE
 #define CONFIG_SYS_PHY_UBOOT_BASE	CONFIG_SYS_UBOOT_BASE
 #endif
 
@@ -51,7 +48,7 @@
 
 .globl _start
 _start: b	reset
-#ifndef CONFIG_NAND_SPL
+#ifndef CONFIG_SPL_BUILD
 	ldr	pc, _undefined_instruction
 	ldr	pc, _software_interrupt
 	ldr	pc, _prefetch_abort
@@ -98,15 +95,11 @@ _end_vect:
 
 .globl _TEXT_BASE
 _TEXT_BASE:
+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE)
+	.word	CONFIG_SPL_TEXT_BASE
+#else
 	.word	CONFIG_SYS_TEXT_BASE
-
-/*
- * Below variable is very important because we use MMU in U-Boot.
- * Without it, we cannot run code correctly before MMU is ON.
- * by scsuh.
- */
-_TEXT_PHY_BASE:
-	.word	CONFIG_SYS_PHY_UBOOT_BASE
+#endif
 
 /*
  * These are defined in the board-specific linker script.
@@ -119,6 +112,10 @@ _TEXT_PHY_BASE:
 _bss_start_ofs:
 	.word __bss_start - _start
 
+.globl _image_copy_end_ofs
+_image_copy_end_ofs:
+	.word __image_copy_end - _start
+
 .globl _bss_end_ofs
 _bss_end_ofs:
 	.word __bss_end - _start
@@ -164,7 +161,7 @@ cpu_init_crit:
 	 * When booting from NAND - it has definitely been a reset, so, no need
 	 * to flush caches and disable the MMU
 	 */
-#ifndef CONFIG_NAND_SPL
+#ifndef CONFIG_SPL_BUILD
 	/*
 	 * flush v4 I/D caches
 	 */
@@ -229,29 +226,24 @@ skip_tcmdisable:
 /*------------------------------------------------------------------------------*/
 
 /*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
+ * void relocate_code(addr_moni)
  *
+ * This function relocates the monitor code.
  */
 	.globl	relocate_code
 relocate_code:
-	mov	r4, r0	/* save addr_sp */
-	mov	r5, r1	/* save addr of gd */
-	mov	r6, r2	/* save addr of destination */
+	mov	r6, r0	/* save addr of destination */
 
 	adr	r0, _start
-	cmp	r0, r6
-	moveq	r9, #0		/* no relocation. relocation offset(r9) = 0 */
+	subs	r9, r6, r0		/* r9 <- relocation offset */
 	beq	relocate_done		/* skip relocation */
 	mov	r1, r6			/* r1 <- scratch for copy_loop */
-	ldr	r3, _bss_start_ofs
+	ldr	r3, _image_copy_end_ofs
 	add	r2, r0, r3		/* r2 <- source end address	    */
 
 copy_loop:
-	ldmia	r0!, {r9-r10}		/* copy from source address [r0]    */
-	stmia	r1!, {r9-r10}		/* copy to   target address [r1]    */
+	ldmia	r0!, {r10-r11}		/* copy from source address [r0]    */
+	stmia	r1!, {r10-r11}		/* copy to   target address [r1]    */
 	cmp	r0, r2			/* until source end address [r2]    */
 	blo	copy_loop
 
@@ -260,7 +252,6 @@ copy_loop:
 	 * fix .rel.dyn relocations
 	 */
 	ldr	r0, _TEXT_BASE		/* r0 <- Text base */
-	sub	r9, r6, r0		/* r9 <- relocation offset */
 	ldr	r10, _dynsym_start_ofs	/* r10 <- sym table ofs */
 	add	r10, r10, r0		/* r10 <- sym table in FLASH */
 	ldr	r2, _rel_dyn_start_ofs	/* r2 <- rel dyn start ofs */
@@ -296,44 +287,6 @@ fixnext:
 	blo	fixloop
 #endif
 
-#ifdef CONFIG_ENABLE_MMU
-enable_mmu:
-	/* enable domain access */
-	ldr	r5, =0x0000ffff
-	mcr	p15, 0, r5, c3, c0, 0	/* load domain access register */
-
-	/* Set the TTB register */
-	ldr	r0, _mmu_table_base
-	ldr	r1, =CONFIG_SYS_PHY_UBOOT_BASE
-	ldr	r2, =0xfff00000
-	bic	r0, r0, r2
-	orr	r1, r0, r1
-	mcr	p15, 0, r1, c2, c0, 0
-
-	/* Enable the MMU */
-	mrc	p15, 0, r0, c1, c0, 0
-	orr	r0, r0, #1		/* Set CR_M to enable MMU */
-
-	/* Prepare to enable the MMU */
-	adr	r1, skip_hw_init
-	and	r1, r1, #0x3fc
-	ldr	r2, _TEXT_BASE
-	ldr	r3, =0xfff00000
-	and	r2, r2, r3
-	orr	r2, r2, r1
-	b	mmu_enable
-
-	.align 5
-	/* Run in a single cache-line */
-mmu_enable:
-
-	mcr	p15, 0, r0, c1, c0, 0
-	nop
-	nop
-	mov	pc, r2
-skip_hw_init:
-#endif
-
 relocate_done:
 
 	bx	lr
@@ -345,52 +298,12 @@ _rel_dyn_end_ofs:
 _dynsym_start_ofs:
 	.word __dynsym_start - _start
 
-#ifdef CONFIG_ENABLE_MMU
-_mmu_table_base:
-	.word mmu_table
-#endif
-
 	.globl	c_runtime_cpu_setup
 c_runtime_cpu_setup:
 
 	mov	pc, lr
 
-#ifndef CONFIG_NAND_SPL
-/*
- * we assume that cache operation is done before. (eg. cleanup_before_linux())
- * actually, we don't need to do anything about cache if not use d-cache in
- * U-Boot. So, in this function we clean only MMU. by scsuh
- *
- * void	theLastJump(void *kernel, int arch_num, uint boot_params);
- */
-#ifdef CONFIG_ENABLE_MMU
-	.globl theLastJump
-theLastJump:
-	mov	r9, r0
-	ldr	r3, =0xfff00000
-	ldr	r4, _TEXT_PHY_BASE
-	adr	r5, phy_last_jump
-	bic	r5, r5, r3
-	orr	r5, r5, r4
-	mov	pc, r5
-phy_last_jump:
-	/*
-	 * disable MMU stuff
-	 */
-	mrc	p15, 0, r0, c1, c0, 0
-	bic	r0, r0, #0x00002300	/* clear bits 13, 9:8 (--V- --RS) */
-	bic	r0, r0, #0x00000087	/* clear bits 7, 2:0 (B--- -CAM) */
-	orr	r0, r0, #0x00000002	/* set bit 2 (A) Align */
-	orr	r0, r0, #0x00001000	/* set bit 12 (I) I-Cache */
-	mcr	p15, 0, r0, c1, c0, 0
-
-	mcr	p15, 0, r0, c8, c7, 0	/* flush v4 TLB */
-
-	mov	r0, #0
-	mov	pc, r9
-#endif
-
-
+#ifndef CONFIG_SPL_BUILD
 /*
  *************************************************************************
  *
@@ -480,9 +393,11 @@ phy_last_jump:
 	/* save caller lr in position 0 of saved stack */
 	str	lr, [r0]
 	/* get the spsr */
-	mrs	r0, spsr
+	mrs	lr, spsr
 	/* save spsr in position 1 of saved stack */
 	str	lr, [r0, #4]
+	/* restore lr */
+	ldr	lr, [r0]
 	/* restore r0 */
 	ldr	r0, [r13]
 	/* pop stack entry */
@@ -533,4 +448,4 @@ fiq:
 	get_bad_stack
 	bad_save_user_regs
 	bl	do_fiq
-#endif /* CONFIG_NAND_SPL */
+#endif /* CONFIG_SPL_BUILD */
diff --git a/arch/arm/cpu/arm720t/start.S b/arch/arm/cpu/arm720t/start.S
index 43bd6edd28..9facc7e694 100644
--- a/arch/arm/cpu/arm720t/start.S
+++ b/arch/arm/cpu/arm720t/start.S
@@ -85,7 +85,7 @@ _pad:			.word 0x12345678 /* now 16*4=64 */
 
 .globl _TEXT_BASE
 _TEXT_BASE:
-#ifdef CONFIG_SPL_BUILD
+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE)
 	.word	CONFIG_SPL_TEXT_BASE
 #else
 	.word	CONFIG_SYS_TEXT_BASE
@@ -101,6 +101,10 @@ _TEXT_BASE:
 _bss_start_ofs:
 	.word __bss_start - _start
 
+.globl _image_copy_end_ofs
+_image_copy_end_ofs:
+	.word __image_copy_end - _start
+
 .globl _bss_end_ofs
 _bss_end_ofs:
 	.word __bss_end - _start
@@ -152,29 +156,24 @@ reset:
 /*------------------------------------------------------------------------------*/
 
 /*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
+ * void relocate_code(addr_moni)
  *
+ * This function relocates the monitor code.
  */
 	.globl	relocate_code
 relocate_code:
-	mov	r4, r0	/* save addr_sp */
-	mov	r5, r1	/* save addr of gd */
-	mov	r6, r2	/* save addr of destination */
+	mov	r6, r0	/* save addr of destination */
 
 	adr	r0, _start
-	cmp	r0, r6
-	moveq	r9, #0		/* no relocation. relocation offset(r9) = 0 */
+	subs	r9, r6, r0		/* r9 <- relocation offset */
 	beq	relocate_done		/* skip relocation */
 	mov	r1, r6			/* r1 <- scratch for copy_loop */
-	ldr	r3, _bss_start_ofs
+	ldr	r3, _image_copy_end_ofs
 	add	r2, r0, r3		/* r2 <- source end address	    */
 
 copy_loop:
-	ldmia	r0!, {r9-r10}		/* copy from source address [r0]    */
-	stmia	r1!, {r9-r10}		/* copy to   target address [r1]    */
+	ldmia	r0!, {r10-r11}		/* copy from source address [r0]    */
+	stmia	r1!, {r10-r11}		/* copy to   target address [r1]    */
 	cmp	r0, r2			/* until source end address [r2]    */
 	blo	copy_loop
 
@@ -183,7 +182,6 @@ copy_loop:
 	 * fix .rel.dyn relocations
 	 */
 	ldr	r0, _TEXT_BASE		/* r0 <- Text base */
-	sub	r9, r6, r0		/* r9 <- relocation offset */
 	ldr	r10, _dynsym_start_ofs	/* r10 <- sym table ofs */
 	add	r10, r10, r0		/* r10 <- sym table in FLASH */
 	ldr	r2, _rel_dyn_start_ofs	/* r2 <- rel dyn start ofs */
diff --git a/arch/arm/cpu/arm920t/ep93xx/u-boot.lds b/arch/arm/cpu/arm920t/ep93xx/u-boot.lds
index e483820f3f..cf55bf7d4d 100644
--- a/arch/arm/cpu/arm920t/ep93xx/u-boot.lds
+++ b/arch/arm/cpu/arm920t/ep93xx/u-boot.lds
@@ -31,18 +31,18 @@ SECTIONS
 	. = ALIGN(4);
 	.text      :
 	{
-	  arch/arm/cpu/arm920t/start.o	(.text)
+	  arch/arm/cpu/arm920t/start.o	(.text*)
 		/* the EP93xx expects to find the pattern 'CRUS' at 0x1000 */
 	  . = 0x1000;
 	  LONG(0x53555243)
-	  *(.text)
+	  *(.text*)
 	}
 
 	. = ALIGN(4);
-	.rodata : { *(.rodata) }
+	.rodata : { *(.rodata*) }
 
 	. = ALIGN(4);
-	.data : { *(.data) }
+	.data : { *(.data*) }
 
 	. = ALIGN(4);
 	.got : { *(.got) }
@@ -55,8 +55,11 @@ SECTIONS
 	}
 
 	. = ALIGN(4);
+
+	__image_copy_end = .;
+
 	__bss_start = .;
-	.bss : { *(.bss) }
+	.bss : { *(.bss*) }
 	__bss_end = .;
 
 	_end = .;
diff --git a/arch/arm/cpu/arm920t/start.S b/arch/arm/cpu/arm920t/start.S
index 2864d128c7..62500250e3 100644
--- a/arch/arm/cpu/arm920t/start.S
+++ b/arch/arm/cpu/arm920t/start.S
@@ -73,7 +73,11 @@ _fiq:			.word fiq
 
 .globl _TEXT_BASE
 _TEXT_BASE:
+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE)
+	.word	CONFIG_SPL_TEXT_BASE
+#else
 	.word	CONFIG_SYS_TEXT_BASE
+#endif
 
 /*
  * These are defined in the board-specific linker script.
@@ -85,6 +89,10 @@ _TEXT_BASE:
 _bss_start_ofs:
 	.word __bss_start - _start
 
+.globl _image_copy_end_ofs
+_image_copy_end_ofs:
+	.word __image_copy_end - _start
+
 .globl _bss_end_ofs
 _bss_end_ofs:
 	.word __bss_end - _start
@@ -187,29 +195,24 @@ copyex:
 /*------------------------------------------------------------------------------*/
 
 /*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
+ * void relocate_code(addr_moni)
  *
+ * This function relocates the monitor code.
  */
 	.globl	relocate_code
 relocate_code:
-	mov	r4, r0	/* save addr_sp */
-	mov	r5, r1	/* save addr of gd */
-	mov	r6, r2	/* save addr of destination */
+	mov	r6, r0	/* save addr of destination */
 
 	adr	r0, _start
-	cmp	r0, r6
-	moveq	r9, #0		/* no relocation. relocation offset(r9) = 0 */
+	subs	r9, r6, r0		/* r9 <- relocation offset */
 	beq	relocate_done		/* skip relocation */
 	mov	r1, r6			/* r1 <- scratch for copy_loop */
-	ldr	r3, _bss_start_ofs
+	ldr	r3, _image_copy_end_ofs
 	add	r2, r0, r3		/* r2 <- source end address	    */
 
 copy_loop:
-	ldmia	r0!, {r9-r10}		/* copy from source address [r0]    */
-	stmia	r1!, {r9-r10}		/* copy to   target address [r1]    */
+	ldmia	r0!, {r10-r11}		/* copy from source address [r0]    */
+	stmia	r1!, {r10-r11}		/* copy to   target address [r1]    */
 	cmp	r0, r2			/* until source end address [r2]    */
 	blo	copy_loop
 
@@ -218,7 +221,6 @@ copy_loop:
 	 * fix .rel.dyn relocations
 	 */
 	ldr	r0, _TEXT_BASE		/* r0 <- Text base */
-	sub	r9, r6, r0		/* r9 <- relocation offset */
 	ldr	r10, _dynsym_start_ofs	/* r10 <- sym table ofs */
 	add	r10, r10, r0		/* r10 <- sym table in FLASH */
 	ldr	r2, _rel_dyn_start_ofs	/* r2 <- rel dyn start ofs */
diff --git a/arch/arm/cpu/arm925t/start.S b/arch/arm/cpu/arm925t/start.S
index 827fee2492..021e2418d8 100644
--- a/arch/arm/cpu/arm925t/start.S
+++ b/arch/arm/cpu/arm925t/start.S
@@ -79,7 +79,11 @@ _fiq:			.word fiq
 
 .globl _TEXT_BASE
 _TEXT_BASE:
+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE)
+	.word	CONFIG_SPL_TEXT_BASE
+#else
 	.word	CONFIG_SYS_TEXT_BASE
+#endif
 
 /*
  * These are defined in the board-specific linker script.
@@ -91,6 +95,10 @@ _TEXT_BASE:
 _bss_start_ofs:
 	.word __bss_start - _start
 
+.globl _image_copy_end_ofs
+_image_copy_end_ofs:
+	.word __image_copy_end - _start
+
 .globl _bss_end_ofs
 _bss_end_ofs:
 	.word __bss_end - _start
@@ -177,29 +185,24 @@ poll1:
 /*------------------------------------------------------------------------------*/
 
 /*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
+ * void relocate_code(addr_moni)
  *
+ * This function relocates the monitor code.
  */
 	.globl	relocate_code
 relocate_code:
-	mov	r4, r0	/* save addr_sp */
-	mov	r5, r1	/* save addr of gd */
-	mov	r6, r2	/* save addr of destination */
+	mov	r6, r0	/* save addr of destination */
 
 	adr	r0, _start
-	cmp	r0, r6
-	moveq	r9, #0		/* no relocation. relocation offset(r9) = 0 */
+	subs	r9, r6, r0		/* r9 <- relocation offset */
 	beq	relocate_done		/* skip relocation */
 	mov	r1, r6			/* r1 <- scratch for copy_loop */
-	ldr	r3, _bss_start_ofs
+	ldr	r3, _image_copy_end_ofs
 	add	r2, r0, r3		/* r2 <- source end address	    */
 
 copy_loop:
-	ldmia	r0!, {r9-r10}		/* copy from source address [r0]    */
-	stmia	r1!, {r9-r10}		/* copy to   target address [r1]    */
+	ldmia	r0!, {r10-r11}		/* copy from source address [r0]    */
+	stmia	r1!, {r10-r11}		/* copy to   target address [r1]    */
 	cmp	r0, r2			/* until source end address [r2]    */
 	blo	copy_loop
 
@@ -208,7 +211,6 @@ copy_loop:
 	 * fix .rel.dyn relocations
 	 */
 	ldr	r0, _TEXT_BASE		/* r0 <- Text base */
-	sub	r9, r6, r0		/* r9 <- relocation offset */
 	ldr	r10, _dynsym_start_ofs	/* r10 <- sym table ofs */
 	add	r10, r10, r0		/* r10 <- sym table in FLASH */
 	ldr	r2, _rel_dyn_start_ofs	/* r2 <- rel dyn start ofs */
diff --git a/arch/arm/cpu/arm926ejs/config.mk b/arch/arm/cpu/arm926ejs/config.mk
index 6a3a1bb354..f0e31d1805 100644
--- a/arch/arm/cpu/arm926ejs/config.mk
+++ b/arch/arm/cpu/arm926ejs/config.mk
@@ -33,7 +33,11 @@ PF_RELFLAGS_SLB_AT := $(call cc-option,-mshort-load-bytes,$(call cc-option,-mali
 PLATFORM_RELFLAGS += $(PF_RELFLAGS_SLB_AT)
 
 ifneq ($(CONFIG_IMX_CONFIG),)
-
+ifdef CONFIG_SPL
+ifdef CONFIG_SPL_BUILD
+ALL-y	+= $(OBJTREE)/SPL
+endif
+else
 ALL-y	+= $(obj)u-boot.imx
-
+endif
 endif
diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c
index fdac73cfaa..bc2d69c857 100644
--- a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c
+++ b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c
@@ -46,17 +46,17 @@ static uint32_t dram_vals[] = {
 	0x00000000, 0x00000000, 0x00010101, 0x01010101,
 	0x000f0f01, 0x0f02020a, 0x00000000, 0x00010101,
 	0x00000100, 0x00000100, 0x00000000, 0x00000002,
-	0x01010000, 0x05060302, 0x06005003, 0x0a0000c8,
-	0x02009c40, 0x0000030c, 0x0036a609, 0x031a0612,
+	0x01010000, 0x07080403, 0x06005003, 0x0a0000c8,
+	0x02009c40, 0x0002030c, 0x0036a609, 0x031a0612,
 	0x02030202, 0x00c8001c, 0x00000000, 0x00000000,
 	0x00012100, 0xffff0303, 0x00012100, 0xffff0303,
 	0x00012100, 0xffff0303, 0x00012100, 0xffff0303,
 	0x00000003, 0x00000000, 0x00000000, 0x00000000,
 	0x00000000, 0x00000000, 0x00000000, 0x00000000,
 	0x00000000, 0x00000000, 0x00000612, 0x01000F02,
-	0x06120612, 0x00000200, 0x00020007, 0xf5014b27,
-	0xf5014b27, 0xf5014b27, 0xf5014b27, 0x07000300,
-	0x07000300, 0x07000300, 0x07000300, 0x00000006,
+	0x06120612, 0x00000200, 0x00020007, 0xf4004a27,
+	0xf4004a27, 0xf4004a27, 0xf4004a27, 0x07000300,
+	0x07000300, 0x07400300, 0x07400300, 0x00000005,
 	0x00000000, 0x00000000, 0x01000000, 0x01020408,
 	0x08040201, 0x000f1133, 0x00000000, 0x00001f04,
 	0x00001f04, 0x00001f04, 0x00001f04, 0x00001f04,
@@ -77,14 +77,14 @@ static uint32_t dram_vals[] = {
 	0x00000000, 0x00000000, 0x00000000, 0x00000000,
 	0x00000000, 0x00000000, 0x00000000, 0x00000000,
 	0x00000000, 0x00000000, 0x00000000, 0x00000000,
-	0x00000000, 0x00000000, 0x00010000, 0x00020304,
-	0x00000004, 0x00000000, 0x00000000, 0x00000000,
+	0x00000000, 0x00000000, 0x00010000, 0x00030404,
+	0x00000003, 0x00000000, 0x00000000, 0x00000000,
 	0x00000000, 0x00000000, 0x00000000, 0x01010000,
 	0x01000000, 0x03030000, 0x00010303, 0x01020202,
 	0x00000000, 0x02040303, 0x21002103, 0x00061200,
-	0x06120612, 0x04320432, 0x04320432, 0x00040004,
+	0x06120612, 0x04420442, 0x04420442, 0x00040004,
 	0x00040004, 0x00000000, 0x00000000, 0x00000000,
-	0x00000000, 0x00010001
+	0x00000000, 0xffffffff
 
 /*
  * i.MX23 DDR at 133MHz
diff --git a/arch/arm/cpu/arm926ejs/mxs/start.S b/arch/arm/cpu/arm926ejs/mxs/start.S
index 373e6d8d7c..bf54423ce2 100644
--- a/arch/arm/cpu/arm926ejs/mxs/start.S
+++ b/arch/arm/cpu/arm926ejs/mxs/start.S
@@ -119,7 +119,11 @@ fiq:
 
 .globl _TEXT_BASE
 _TEXT_BASE:
+#ifdef CONFIG_SPL_TEXT_BASE
+	.word	CONFIG_SPL_TEXT_BASE
+#else
 	.word	CONFIG_SYS_TEXT_BASE
+#endif
 
 /*
  * These are defined in the board-specific linker script.
diff --git a/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds b/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds
index 67b204e447..673c725ab3 100644
--- a/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds
+++ b/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds
@@ -37,8 +37,8 @@ SECTIONS
 	. = ALIGN(4);
 	.text	:
 	{
-		arch/arm/cpu/arm926ejs/mxs/start.o	(.text)
-		*(.text)
+		arch/arm/cpu/arm926ejs/mxs/start.o	(.text*)
+		*(.text*)
 	}
 
 	. = ALIGN(4);
@@ -46,7 +46,7 @@ SECTIONS
 
 	. = ALIGN(4);
 	.data : {
-		*(.data)
+		*(.data*)
 	}
 
 	. = ALIGN(4);
diff --git a/arch/arm/cpu/arm926ejs/omap/timer.c b/arch/arm/cpu/arm926ejs/omap/timer.c
index 34ec7b2b1c..16530b03b8 100644
--- a/arch/arm/cpu/arm926ejs/omap/timer.c
+++ b/arch/arm/cpu/arm926ejs/omap/timer.c
@@ -36,11 +36,14 @@
  */
 
 #include <common.h>
+#include <asm/io.h>
 
-#define TIMER_LOAD_VAL 0xffffffff
+#define TIMER_CLOCK	(CONFIG_SYS_CLK_FREQ / (2 << CONFIG_SYS_PTV))
+#define TIMER_LOAD_VAL	0xffffffff
 
 /* macro to read the 32 bit timer */
-#define READ_TIMER (*(volatile ulong *)(CONFIG_SYS_TIMERBASE+8))
+#define READ_TIMER	readl(CONFIG_SYS_TIMERBASE+8) \
+			/ (TIMER_CLOCK / CONFIG_SYS_HZ)
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -114,7 +117,8 @@ ulong get_timer_masked (void)
 		 * (TLV-now) amount of time after passing though -1
 		 * nts = new "advancing time stamp"...it could also roll and cause problems.
 		 */
-		timestamp += lastdec + TIMER_LOAD_VAL - now;
+		timestamp += lastdec + (TIMER_LOAD_VAL / (TIMER_CLOCK /
+					CONFIG_SYS_HZ)) - now;
 	}
 	lastdec = now;
 
@@ -160,8 +164,5 @@ unsigned long long get_ticks(void)
  */
 ulong get_tbclk (void)
 {
-	ulong tbclk;
-
-	tbclk = CONFIG_SYS_HZ;
-	return tbclk;
+	return CONFIG_SYS_HZ;
 }
diff --git a/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds b/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
index 7405917595..967a135b3b 100644
--- a/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
+++ b/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
@@ -37,8 +37,8 @@ SECTIONS
 	. = ALIGN(4);
 	.text	:
 	{
-		arch/arm/cpu/arm926ejs/spear/start.o	(.text)
-		*(.text)
+		arch/arm/cpu/arm926ejs/spear/start.o	(.text*)
+		*(.text*)
 	}
 
 	. = ALIGN(4);
@@ -46,7 +46,7 @@ SECTIONS
 
 	. = ALIGN(4);
 	.data : {
-		*(.data)
+		*(.data*)
 	}
 
 	. = ALIGN(4);
diff --git a/arch/arm/cpu/arm926ejs/start.S b/arch/arm/cpu/arm926ejs/start.S
index f5d15828d3..4c5671109d 100644
--- a/arch/arm/cpu/arm926ejs/start.S
+++ b/arch/arm/cpu/arm926ejs/start.S
@@ -120,15 +120,11 @@ _fiq:
 
 .globl _TEXT_BASE
 _TEXT_BASE:
-#ifdef CONFIG_NAND_SPL /* deprecated, use instead CONFIG_SPL_BUILD */
-	.word	CONFIG_SYS_TEXT_BASE
-#else
-#ifdef CONFIG_SPL_BUILD
+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE)
 	.word	CONFIG_SPL_TEXT_BASE
 #else
 	.word	CONFIG_SYS_TEXT_BASE
 #endif
-#endif
 
 /*
  * These are defined in the board-specific linker script.
@@ -140,6 +136,10 @@ _TEXT_BASE:
 _bss_start_ofs:
 	.word __bss_start - _start
 
+.globl _image_copy_end_ofs
+_image_copy_end_ofs:
+	.word __image_copy_end - _start
+
 .globl _bss_end_ofs
 _bss_end_ofs:
 	.word __bss_end - _start
@@ -148,12 +148,6 @@ _bss_end_ofs:
 _end_ofs:
 	.word _end - _start
 
-#ifdef CONFIG_NAND_U_BOOT
-.globl _end
-_end:
-	.word __bss_end
-#endif
-
 #ifdef CONFIG_USE_IRQ
 /* IRQ stack memory (calculated at run-time) */
 .globl IRQ_STACK_START
@@ -196,32 +190,25 @@ reset:
 
 /*------------------------------------------------------------------------------*/
 
-#if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_NAND_SPL)
 /*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
+ * void relocate_code(addr_moni)
  *
+ * This function relocates the monitor code.
  */
 	.globl	relocate_code
 relocate_code:
-	mov	r4, r0	/* save addr_sp */
-	mov	r5, r1	/* save addr of gd */
-	mov	r6, r2	/* save addr of destination */
+	mov	r6, r0	/* save addr of destination */
 
 	adr	r0, _start
-	sub	r9, r6, r0		/* r9 <- relocation offset */
-	cmp	r0, r6
-	moveq	r9, #0			/* no relocation. offset(r9) = 0 */
+	subs	r9, r6, r0		/* r9 <- relocation offset */
 	beq	relocate_done		/* skip relocation */
 	mov	r1, r6			/* r1 <- scratch for copy loop */
-	ldr	r3, _bss_start_ofs
+	ldr	r3, _image_copy_end_ofs
 	add	r2, r0, r3		/* r2 <- source end address	    */
 
 copy_loop:
-	ldmia	r0!, {r9-r10}		/* copy from source address [r0]    */
-	stmia	r1!, {r9-r10}		/* copy to   target address [r1]    */
+	ldmia	r0!, {r10-r11}		/* copy from source address [r0]    */
+	stmia	r1!, {r10-r11}		/* copy to   target address [r1]    */
 	cmp	r0, r2			/* until source end address [r2]    */
 	blo	copy_loop
 
@@ -230,7 +217,6 @@ copy_loop:
 	 * fix .rel.dyn relocations
 	 */
 	ldr	r0, _TEXT_BASE		/* r0 <- Text base */
-	sub	r9, r6, r0		/* r9 <- relocation offset */
 	ldr	r10, _dynsym_start_ofs	/* r10 <- sym table ofs */
 	add	r10, r10, r0		/* r10 <- sym table in FLASH */
 	ldr	r2, _rel_dyn_start_ofs	/* r2 <- rel dyn start ofs */
@@ -270,6 +256,8 @@ relocate_done:
 
 	bx	lr
 
+#ifndef CONFIG_SPL_BUILD
+
 _rel_dyn_start_ofs:
 	.word __rel_dyn_start - _start
 _rel_dyn_end_ofs:
diff --git a/arch/arm/cpu/arm946es/start.S b/arch/arm/cpu/arm946es/start.S
index 9dec35b557..9c2b70db0d 100644
--- a/arch/arm/cpu/arm946es/start.S
+++ b/arch/arm/cpu/arm946es/start.S
@@ -89,7 +89,11 @@ _vectors_end:
 
 .globl _TEXT_BASE
 _TEXT_BASE:
+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE)
+	.word	CONFIG_SPL_TEXT_BASE
+#else
 	.word	CONFIG_SYS_TEXT_BASE
+#endif
 
 /*
  * These are defined in the board-specific linker script.
@@ -101,6 +105,10 @@ _TEXT_BASE:
 _bss_start_ofs:
 	.word __bss_start - _start
 
+.globl _image_copy_end_ofs
+_image_copy_end_ofs:
+	.word __image_copy_end - _start
+
 .globl _bss_end_ofs
 _bss_end_ofs:
 	.word __bss_end - _start
@@ -152,29 +160,24 @@ reset:
 /*------------------------------------------------------------------------------*/
 
 /*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
+ * void relocate_code(addr_moni)
  *
+ * This function relocates the monitor code.
  */
 	.globl	relocate_code
 relocate_code:
-	mov	r4, r0	/* save addr_sp */
-	mov	r5, r1	/* save addr of gd */
-	mov	r6, r2	/* save addr of destination */
+	mov	r6, r0	/* save addr of destination */
 
 	adr	r0, _start
-	cmp	r0, r6
-	moveq	r9, #0		/* no relocation. relocation offset(r9) = 0 */
+	subs	r9, r6, r0		/* r9 <- relocation offset */
 	beq	relocate_done		/* skip relocation */
 	mov	r1, r6			/* r1 <- scratch for copy_loop */
-	ldr	r3, _bss_start_ofs
+	ldr	r3, _image_copy_end_ofs
 	add	r2, r0, r3		/* r2 <- source end address	    */
 
 copy_loop:
-	ldmia	r0!, {r9-r10}		/* copy from source address [r0]    */
-	stmia	r1!, {r9-r10}		/* copy to   target address [r1]    */
+	ldmia	r0!, {r10-r11}		/* copy from source address [r0]    */
+	stmia	r1!, {r10-r11}		/* copy to   target address [r1]    */
 	cmp	r0, r2			/* until source end address [r2]    */
 	blo	copy_loop
 
@@ -183,7 +186,6 @@ copy_loop:
 	 * fix .rel.dyn relocations
 	 */
 	ldr	r0, _TEXT_BASE		/* r0 <- Text base */
-	sub	r9, r6, r0		/* r9 <- relocation offset */
 	ldr	r10, _dynsym_start_ofs	/* r10 <- sym table ofs */
 	add	r10, r10, r0		/* r10 <- sym table in FLASH */
 	ldr	r2, _rel_dyn_start_ofs	/* r2 <- rel dyn start ofs */
diff --git a/arch/arm/cpu/arm_intcm/start.S b/arch/arm/cpu/arm_intcm/start.S
index 04d08458f3..5e8c5289fc 100644
--- a/arch/arm/cpu/arm_intcm/start.S
+++ b/arch/arm/cpu/arm_intcm/start.S
@@ -85,7 +85,11 @@ _fiq:
 
 .globl _TEXT_BASE
 _TEXT_BASE:
-	.word	CONFIG_SYS_TEXT_BASE /* address of _start in the linked image */
+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE)
+	.word	CONFIG_SPL_TEXT_BASE
+#else
+	.word	CONFIG_SYS_TEXT_BASE
+#endif
 
 /*
  * These are defined in the board-specific linker script.
@@ -97,6 +101,10 @@ _TEXT_BASE:
 _bss_start_ofs:
 	.word __bss_start - _start
 
+.globl _image_copy_end_ofs
+_image_copy_end_ofs:
+	.word __image_copy_end - _start
+
 .globl _bss_end_ofs
 _bss_end_ofs:
 	.word __bss_end - _start
@@ -148,29 +156,24 @@ reset:
 /*------------------------------------------------------------------------------*/
 
 /*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
+ * void relocate_code(addr_moni)
  *
+ * This function relocates the monitor code.
  */
 	.globl	relocate_code
 relocate_code:
-	mov	r4, r0	/* save addr_sp */
-	mov	r5, r1	/* save addr of gd */
-	mov	r6, r2	/* save addr of destination */
+	mov	r6, r0	/* save addr of destination */
 
 	adr	r0, _start
-	cmp	r0, r6
-	moveq	r9, #0		/* no relocation. relocation offset(r9) = 0 */
+	subs	r9, r6, r0		/* r9 <- relocation offset */
 	beq	relocate_done		/* skip relocation */
 	mov	r1, r6			/* r1 <- scratch for copy_loop */
-	ldr	r3, _bss_start_ofs
+	ldr	r3, _image_copy_end_ofs
 	add	r2, r0, r3		/* r2 <- source end address	    */
 
 copy_loop:
-	ldmia	r0!, {r9-r10}		/* copy from source address [r0]    */
-	stmia	r1!, {r9-r10}		/* copy to   target address [r1]    */
+	ldmia	r0!, {r10-r11}		/* copy from source address [r0]    */
+	stmia	r1!, {r10-r11}		/* copy to   target address [r1]    */
 	cmp	r0, r2			/* until source end address [r2]    */
 	blo	copy_loop
 
@@ -179,7 +182,6 @@ copy_loop:
 	 * fix .rel.dyn relocations
 	 */
 	ldr	r0, _TEXT_BASE		/* r0 <- Text base */
-	sub	r9, r6, r0		/* r9 <- relocation offset */
 	ldr	r10, _dynsym_start_ofs	/* r10 <- sym table ofs */
 	add	r10, r10, r0		/* r10 <- sym table in FLASH */
 	ldr	r2, _rel_dyn_start_ofs	/* r2 <- rel dyn start ofs */
diff --git a/arch/arm/cpu/armv7/am33xx/clock_am33xx.c b/arch/arm/cpu/armv7/am33xx/clock_am33xx.c
index afc0d92059..a1efc7520a 100644
--- a/arch/arm/cpu/armv7/am33xx/clock_am33xx.c
+++ b/arch/arm/cpu/armv7/am33xx/clock_am33xx.c
@@ -195,6 +195,11 @@ static void enable_per_clocks(void)
 	while (readl(&cmper->mmc0clkctrl) != PRCM_MOD_EN)
 		;
 
+	/* MMC1 */
+	writel(PRCM_MOD_EN, &cmper->mmc1clkctrl);
+	while (readl(&cmper->mmc1clkctrl) != PRCM_MOD_EN)
+		;
+
 	/* i2c0 */
 	writel(PRCM_MOD_EN, &cmwkup->wkup_i2c0ctrl);
 	while (readl(&cmwkup->wkup_i2c0ctrl) != PRCM_MOD_EN)
diff --git a/arch/arm/cpu/armv7/am33xx/elm.c b/arch/arm/cpu/armv7/am33xx/elm.c
index 9eed23d75a..41df612956 100644
--- a/arch/arm/cpu/armv7/am33xx/elm.c
+++ b/arch/arm/cpu/armv7/am33xx/elm.c
@@ -33,7 +33,7 @@
 #include <asm/io.h>
 #include <asm/errno.h>
 #include <asm/arch/cpu.h>
-#include <asm/arch/omap_gpmc.h>
+#include <asm/omap_gpmc.h>
 #include <asm/arch/elm.h>
 
 #define ELM_DEFAULT_POLY (0)
diff --git a/arch/arm/cpu/armv7/config.mk b/arch/arm/cpu/armv7/config.mk
index 9c3e2f3ce4..56b8053770 100644
--- a/arch/arm/cpu/armv7/config.mk
+++ b/arch/arm/cpu/armv7/config.mk
@@ -40,5 +40,11 @@ PF_NO_UNALIGNED := $(call cc-option, -mno-unaligned-access,)
 PLATFORM_NO_UNALIGNED := $(PF_NO_UNALIGNED)
 
 ifneq ($(CONFIG_IMX_CONFIG),)
+ifdef CONFIG_SPL
+ifdef CONFIG_SPL_BUILD
+ALL-y	+= $(OBJTREE)/SPL
+endif
+else
 ALL-y	+= $(obj)u-boot.imx
 endif
+endif
diff --git a/arch/arm/cpu/armv7/exynos/clock.c b/arch/arm/cpu/armv7/exynos/clock.c
index 956427c9eb..223660aab6 100644
--- a/arch/arm/cpu/armv7/exynos/clock.c
+++ b/arch/arm/cpu/armv7/exynos/clock.c
@@ -27,6 +27,49 @@
 #include <asm/arch/clk.h>
 #include <asm/arch/periph.h>
 
+/* *
+ * This structure is to store the src bit, div bit and prediv bit
+ * positions of the peripheral clocks of the src and div registers
+ */
+struct clk_bit_info {
+	int8_t src_bit;
+	int8_t div_bit;
+	int8_t prediv_bit;
+};
+
+/* src_bit div_bit prediv_bit */
+static struct clk_bit_info clk_bit_info[PERIPH_ID_COUNT] = {
+	{0,	0,	-1},
+	{4,	4,	-1},
+	{8,	8,	-1},
+	{12,	12,	-1},
+	{0,	0,	8},
+	{4,	16,	24},
+	{8,	0,	8},
+	{12,	16,	24},
+	{-1,	-1,	-1},
+	{16,	0,	8},
+	{20,	16,	24},
+	{24,	0,	8},
+	{0,	0,	4},
+	{4,	12,	16},
+	{-1,	-1,	-1},
+	{-1,	-1,	-1},
+	{-1,	24,	0},
+	{-1,	24,	0},
+	{-1,	24,	0},
+	{-1,	24,	0},
+	{-1,	24,	0},
+	{-1,	24,	0},
+	{-1,	24,	0},
+	{-1,	24,	0},
+	{24,	0,	-1},
+	{24,	0,	-1},
+	{24,	0,	-1},
+	{24,	0,	-1},
+	{24,	0,	-1},
+};
+
 /* Epll Clock division values to achive different frequency output */
 static struct set_epll_con_val exynos5_epll_div[] = {
 	{ 192000000, 0, 48, 3, 1, 0 },
@@ -201,6 +244,107 @@ static unsigned long exynos5_get_pll_clk(int pllreg)
 	return fout;
 }
 
+static unsigned long exynos5_get_periph_rate(int peripheral)
+{
+	struct clk_bit_info *bit_info = &clk_bit_info[peripheral];
+	unsigned long sclk, sub_clk;
+	unsigned int src, div, sub_div;
+	struct exynos5_clock *clk =
+			(struct exynos5_clock *)samsung_get_base_clock();
+
+	switch (peripheral) {
+	case PERIPH_ID_UART0:
+	case PERIPH_ID_UART1:
+	case PERIPH_ID_UART2:
+	case PERIPH_ID_UART3:
+		src = readl(&clk->src_peric0);
+		div = readl(&clk->div_peric0);
+		break;
+	case PERIPH_ID_PWM0:
+	case PERIPH_ID_PWM1:
+	case PERIPH_ID_PWM2:
+	case PERIPH_ID_PWM3:
+	case PERIPH_ID_PWM4:
+		src = readl(&clk->src_peric0);
+		div = readl(&clk->div_peric3);
+		break;
+	case PERIPH_ID_SPI0:
+	case PERIPH_ID_SPI1:
+		src = readl(&clk->src_peric1);
+		div = readl(&clk->div_peric1);
+		break;
+	case PERIPH_ID_SPI2:
+		src = readl(&clk->src_peric1);
+		div = readl(&clk->div_peric2);
+		break;
+	case PERIPH_ID_SPI3:
+	case PERIPH_ID_SPI4:
+		src = readl(&clk->sclk_src_isp);
+		div = readl(&clk->sclk_div_isp);
+		break;
+	case PERIPH_ID_SDMMC0:
+	case PERIPH_ID_SDMMC1:
+	case PERIPH_ID_SDMMC2:
+	case PERIPH_ID_SDMMC3:
+		src = readl(&clk->src_fsys);
+		div = readl(&clk->div_fsys1);
+		break;
+	case PERIPH_ID_I2C0:
+	case PERIPH_ID_I2C1:
+	case PERIPH_ID_I2C2:
+	case PERIPH_ID_I2C3:
+	case PERIPH_ID_I2C4:
+	case PERIPH_ID_I2C5:
+	case PERIPH_ID_I2C6:
+	case PERIPH_ID_I2C7:
+		sclk = exynos5_get_pll_clk(MPLL);
+		sub_div = ((readl(&clk->div_top1) >> bit_info->div_bit)
+								& 0x7) + 1;
+		div = ((readl(&clk->div_top0) >> bit_info->prediv_bit)
+								& 0x7) + 1;
+		return (sclk / sub_div) / div;
+	default:
+		debug("%s: invalid peripheral %d", __func__, peripheral);
+		return -1;
+	};
+
+	src = (src >> bit_info->src_bit) & 0xf;
+
+	switch (src) {
+	case EXYNOS_SRC_MPLL:
+		sclk = exynos5_get_pll_clk(MPLL);
+		break;
+	case EXYNOS_SRC_EPLL:
+		sclk = exynos5_get_pll_clk(EPLL);
+		break;
+	case EXYNOS_SRC_VPLL:
+		sclk = exynos5_get_pll_clk(VPLL);
+		break;
+	default:
+		return 0;
+	}
+
+	/* Ratio clock division for this peripheral */
+	sub_div = (div >> bit_info->div_bit) & 0xf;
+	sub_clk = sclk / (sub_div + 1);
+
+	/* Pre-ratio clock division for SDMMC0 and 2 */
+	if (peripheral == PERIPH_ID_SDMMC0 || peripheral == PERIPH_ID_SDMMC2) {
+		div = (div >> bit_info->prediv_bit) & 0xff;
+		return sub_clk / (div + 1);
+	}
+
+	return sub_clk;
+}
+
+unsigned long clock_get_periph_rate(int peripheral)
+{
+	if (cpu_is_exynos5())
+		return exynos5_get_periph_rate(peripheral);
+	else
+		return 0;
+}
+
 /* exynos4: return ARM clock frequency */
 static unsigned long exynos4_get_arm_clk(void)
 {
@@ -324,27 +468,6 @@ static unsigned long exynos4x12_get_pwm_clk(void)
 	return pclk;
 }
 
-/* exynos5: return pwm clock frequency */
-static unsigned long exynos5_get_pwm_clk(void)
-{
-	struct exynos5_clock *clk =
-		(struct exynos5_clock *)samsung_get_base_clock();
-	unsigned long pclk, sclk;
-	unsigned int ratio;
-
-	/*
-	 * CLK_DIV_PERIC3
-	 * PWM_RATIO [3:0]
-	 */
-	ratio = readl(&clk->div_peric3);
-	ratio = ratio & 0xf;
-	sclk = get_pll_clk(MPLL);
-
-	pclk = sclk / (ratio + 1);
-
-	return pclk;
-}
-
 /* exynos4: return uart clock frequency */
 static unsigned long exynos4_get_uart_clk(int dev_index)
 {
@@ -1210,7 +1333,7 @@ unsigned long get_i2c_clk(void)
 unsigned long get_pwm_clk(void)
 {
 	if (cpu_is_exynos5())
-		return exynos5_get_pwm_clk();
+		return clock_get_periph_rate(PERIPH_ID_PWM0);
 	else {
 		if (proid_is_exynos4412())
 			return exynos4x12_get_pwm_clk();
diff --git a/arch/arm/cpu/armv7/exynos/soc.c b/arch/arm/cpu/armv7/exynos/soc.c
index ab65b8d3a8..e948e4c638 100644
--- a/arch/arm/cpu/armv7/exynos/soc.c
+++ b/arch/arm/cpu/armv7/exynos/soc.c
@@ -23,6 +23,14 @@
 
 #include <common.h>
 #include <asm/io.h>
+#include <asm/system.h>
+
+enum l2_cache_params {
+	CACHE_TAG_RAM_SETUP = (1 << 9),
+	CACHE_DATA_RAM_SETUP = (1 << 5),
+	CACHE_TAG_RAM_LATENCY = (2 << 6),
+	CACHE_DATA_RAM_LATENCY = (2 << 0)
+};
 
 void reset_cpu(ulong addr)
 {
@@ -36,3 +44,31 @@ void enable_caches(void)
 	dcache_enable();
 }
 #endif
+
+#ifndef CONFIG_SYS_L2CACHE_OFF
+/*
+ * Set L2 cache parameters
+ */
+static void exynos5_set_l2cache_params(void)
+{
+	unsigned int val = 0;
+
+	asm volatile("mrc p15, 1, %0, c9, c0, 2\n" : "=r"(val));
+
+	val |= CACHE_TAG_RAM_SETUP |
+		CACHE_DATA_RAM_SETUP |
+		CACHE_TAG_RAM_LATENCY |
+		CACHE_DATA_RAM_LATENCY;
+
+	asm volatile("mcr p15, 1, %0, c9, c0, 2\n" : : "r"(val));
+}
+
+/*
+ * Sets L2 cache related parameters before enabling data cache
+ */
+void v7_outer_cache_enable(void)
+{
+	if (cpu_is_exynos5())
+		exynos5_set_l2cache_params();
+}
+#endif
diff --git a/arch/arm/cpu/armv7/mx5/lowlevel_init.S b/arch/arm/cpu/armv7/mx5/lowlevel_init.S
index 6d9396a976..dfce0ca83e 100644
--- a/arch/arm/cpu/armv7/mx5/lowlevel_init.S
+++ b/arch/arm/cpu/armv7/mx5/lowlevel_init.S
@@ -309,8 +309,7 @@ setup_pll_func:
         ldr r0, =CCM_BASE_ADDR
         ldr r1, =0x00015154
         str r1, [r0, #CLKCTL_CBCMR]
-        ldr r1, =0x02888945
-        orr r1, r1, #(1 << 16)
+        ldr r1, =0x02898945
         str r1, [r0, #CLKCTL_CBCDR]
         /* make sure change is effective */
 1:      ldr r1, [r0, #CLKCTL_CDHIPR]
@@ -321,10 +320,7 @@ setup_pll_func:
 
 	/* Switch peripheral to PLL2 */
 	ldr r0, =CCM_BASE_ADDR
-	ldr r1, =0x00808145
-	orr r1, r1, #(2 << 10)
-	orr r1, r1, #(0 << 16)
-	orr r1, r1, #(1 << 19)
+	ldr r1, =0x00888945
 	str r1, [r0, #CLKCTL_CBCDR]
 
 	ldr r1, =0x00016154
diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c
index 193ba1240f..2ea8ca3bd3 100644
--- a/arch/arm/cpu/armv7/mx6/soc.c
+++ b/arch/arm/cpu/armv7/mx6/soc.c
@@ -61,6 +61,18 @@ u32 get_cpu_rev(void)
 	return (type << 12) | (reg + 0x10);
 }
 
+#ifdef CONFIG_REVISION_TAG
+u32 __weak get_board_rev(void)
+{
+	u32 cpurev = get_cpu_rev();
+	u32 type = ((cpurev >> 12) & 0xff);
+	if (type == MXC_CPU_MX6SOLO)
+		cpurev = (MXC_CPU_MX6DL) << 12 | (cpurev & 0xFFF);
+
+	return cpurev;
+}
+#endif
+
 void init_aips(void)
 {
 	struct aipstz_regs *aips1, *aips2;
diff --git a/arch/arm/cpu/armv7/omap-common/clocks-common.c b/arch/arm/cpu/armv7/omap-common/clocks-common.c
index 9ed18995ea..2b955c7c00 100644
--- a/arch/arm/cpu/armv7/omap-common/clocks-common.c
+++ b/arch/arm/cpu/armv7/omap-common/clocks-common.c
@@ -612,7 +612,7 @@ void freq_update_core(void)
 
 	/*
 	 * Putting EMIF in HW_AUTO is seen to be causing issues with
-	 * EMIF clocks and the master DLL. Put EMIF in SW_WKUP
+	 * EMIF clocks and the master DLL. Keep EMIF in SW_WKUP
 	 * in OMAP5430 ES1.0 silicon
 	 */
 	if (omap_rev != OMAP5430_ES1_0) {
@@ -659,7 +659,7 @@ void setup_clocks_for_console(void)
 			MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN <<
 			MODULE_CLKCTRL_MODULEMODE_SHIFT);
 
-	clrsetbits_le32((*prcm)->cm_l4per_uart3_clkctrl,
+	clrsetbits_le32((*prcm)->cm_l4per_uart4_clkctrl,
 			MODULE_CLKCTRL_MODULEMODE_MASK,
 			MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN <<
 			MODULE_CLKCTRL_MODULEMODE_SHIFT);
diff --git a/arch/arm/cpu/armv7/omap-common/emif-common.c b/arch/arm/cpu/armv7/omap-common/emif-common.c
index 9eb1279d41..cdb4439721 100644
--- a/arch/arm/cpu/armv7/omap-common/emif-common.c
+++ b/arch/arm/cpu/armv7/omap-common/emif-common.c
@@ -655,20 +655,27 @@ static u32 get_ddr_phy_ctrl_1(u32 freq, u8 RL)
 	return phy;
 }
 
-static u32 get_emif_mem_size(struct emif_device_details *devices)
+static u32 get_emif_mem_size(u32 base)
 {
 	u32 size_mbytes = 0, temp;
+	struct emif_device_details dev_details;
+	struct lpddr2_device_details cs0_dev_details, cs1_dev_details;
+	u32 emif_nr = emif_num(base);
 
-	if (!devices)
-		return 0;
+	emif_reset_phy(base);
+	dev_details.cs0_device_details = emif_get_device_details(emif_nr, CS0,
+						&cs0_dev_details);
+	dev_details.cs1_device_details = emif_get_device_details(emif_nr, CS1,
+						&cs1_dev_details);
+	emif_reset_phy(base);
 
-	if (devices->cs0_device_details) {
-		temp = devices->cs0_device_details->density;
+	if (dev_details.cs0_device_details) {
+		temp = dev_details.cs0_device_details->density;
 		size_mbytes += lpddr2_density_2_size_in_mbytes[temp];
 	}
 
-	if (devices->cs1_device_details) {
-		temp = devices->cs1_device_details->density;
+	if (dev_details.cs1_device_details) {
+		temp = dev_details.cs1_device_details->density;
 		size_mbytes += lpddr2_density_2_size_in_mbytes[temp];
 	}
 	/* convert to bytes */
@@ -1040,13 +1047,9 @@ static void do_sdram_init(u32 base)
 	/* Return if no devices on this EMIF */
 	if (!dev_details.cs0_device_details &&
 	    !dev_details.cs1_device_details) {
-		emif_sizes[emif_nr - 1] = 0;
 		return;
 	}
 
-	if (!in_sdram)
-		emif_sizes[emif_nr - 1] = get_emif_mem_size(&dev_details);
-
 	/*
 	 * Get device timings:
 	 * - Default timings specified by JESD209-2 if
@@ -1108,8 +1111,8 @@ void dmm_init(u32 base)
 	mapped_size = 0;
 	section_cnt = 3;
 	sys_addr = CONFIG_SYS_SDRAM_BASE;
-	emif1_size = emif_sizes[0];
-	emif2_size = emif_sizes[1];
+	emif1_size = get_emif_mem_size(EMIF1_BASE);
+	emif2_size = get_emif_mem_size(EMIF2_BASE);
 	debug("emif1_size 0x%x emif2_size 0x%x\n", emif1_size, emif2_size);
 
 	if (!emif1_size && !emif2_size)
diff --git a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
index b933fe8437..90b3c8aea4 100644
--- a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
+++ b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
@@ -60,10 +60,14 @@ ENTRY(save_boot_params)
 	ldr	r3, =boot_params
 	strb	r2, [r3, #BOOT_DEVICE_OFFSET]	@ spl_boot_device <- r1
 
-	/* boot mode is passed only for devices that can raw/fat mode */
-	cmp	r2, #BOOT_DEVICE_XIP
+	/*
+	 * boot mode is only valid for device that can be raw or FAT booted.
+	 * in other cases it may be fatal to look.  While platforms differ
+	 * in the values used for each MMC slot, they are contiguous.
+	 */
+	cmp	r2, #MMC_BOOT_DEVICES_START
 	blt	2f
-	cmp	r2, #BOOT_DEVICE_MMC2
+	cmp	r2, #MMC_BOOT_DEVICES_END
 	bgt	2f
 	/* Store the boot mode (raw/FAT) in omap_bootmode */
 	ldr	r2, [r0, #DEV_DESC_PTR_OFFSET]	@ get the device descriptor ptr
diff --git a/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds b/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds
index efae381bdb..bd218c07da 100644
--- a/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds
+++ b/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds
@@ -38,7 +38,7 @@ SECTIONS
 	.text      :
 	{
 		__start = .;
-		arch/arm/cpu/armv7/start.o	(.text)
+		arch/arm/cpu/armv7/start.o	(.text*)
 		*(.text*)
 	} >.sram
 
diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c
index c6d9a425a5..b72fadc257 100644
--- a/arch/arm/cpu/armv7/omap3/board.c
+++ b/arch/arm/cpu/armv7/omap3/board.c
@@ -328,14 +328,25 @@ void abort(void)
  *****************************************************************************/
 static int do_switch_ecc(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
 {
-	if (argc != 2)
+	if (argc < 2 || argc > 3)
 		goto usage;
-	if (strncmp(argv[1], "hw", 2) == 0)
-		omap_nand_switch_ecc(1);
-	else if (strncmp(argv[1], "sw", 2) == 0)
-		omap_nand_switch_ecc(0);
-	else
+
+	if (strncmp(argv[1], "hw", 2) == 0) {
+		if (argc == 2) {
+			omap_nand_switch_ecc(1, 1);
+		} else {
+			if (strncmp(argv[2], "hamming", 7) == 0)
+				omap_nand_switch_ecc(1, 1);
+			else if (strncmp(argv[2], "bch8", 4) == 0)
+				omap_nand_switch_ecc(1, 8);
+			else
+				goto usage;
+		}
+	} else if (strncmp(argv[1], "sw", 2) == 0) {
+		omap_nand_switch_ecc(0, 0);
+	} else {
 		goto usage;
+	}
 
 	return 0;
 
@@ -345,9 +356,13 @@ usage:
 }
 
 U_BOOT_CMD(
-	nandecc, 2, 1,	do_switch_ecc,
+	nandecc, 3, 1,	do_switch_ecc,
 	"switch OMAP3 NAND ECC calculation algorithm",
-	"[hw/sw] - Switch between NAND hardware (hw) or software (sw) ecc algorithm"
+	"hw [hamming|bch8] - Switch between NAND hardware 1-bit hamming and"
+	" 8-bit BCH\n"
+	"                           ecc calculation (second parameter may"
+	" be omitted).\n"
+	"nandecc sw               - Switch to NAND software ecc algorithm."
 );
 
 #endif /* CONFIG_NAND_OMAP_GPMC & !CONFIG_SPL_BUILD */
diff --git a/arch/arm/cpu/armv7/omap3/sys_info.c b/arch/arm/cpu/armv7/omap3/sys_info.c
index 3c80113502..08a63d266e 100644
--- a/arch/arm/cpu/armv7/omap3/sys_info.c
+++ b/arch/arm/cpu/armv7/omap3/sys_info.c
@@ -299,9 +299,9 @@ int print_cpuinfo (void)
 		}
 		if ((get_cpu_rev() >= CPU_3XX_ES31) &&
 		    (get_sku_id() == SKUID_CLK_720MHZ))
-			max_clk = "720 mHz";
+			max_clk = "720 MHz";
 		else
-			max_clk = "600 mHz";
+			max_clk = "600 MHz";
 
 		break;
 	case CPU_AM35XX:
diff --git a/arch/arm/cpu/armv7/omap4/emif.c b/arch/arm/cpu/armv7/omap4/emif.c
index ca4823dd79..53f60635b1 100644
--- a/arch/arm/cpu/armv7/omap4/emif.c
+++ b/arch/arm/cpu/armv7/omap4/emif.c
@@ -33,7 +33,6 @@
 #ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
 u32 *const T_num = (u32 *)OMAP4_SRAM_SCRATCH_EMIF_T_NUM;
 u32 *const T_den = (u32 *)OMAP4_SRAM_SCRATCH_EMIF_T_DEN;
-u32 *const emif_sizes = (u32 *)OMAP4_SRAM_SCRATCH_EMIF_SIZE;
 #endif
 
 #ifdef CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
diff --git a/arch/arm/cpu/armv7/omap4/hw_data.c b/arch/arm/cpu/armv7/omap4/hw_data.c
index 7551b9861e..04977b4f2b 100644
--- a/arch/arm/cpu/armv7/omap4/hw_data.c
+++ b/arch/arm/cpu/armv7/omap4/hw_data.c
@@ -216,14 +216,14 @@ struct dplls omap4460_dplls = {
 
 struct pmic_data twl6030_4430es1 = {
 	.base_offset = PHOENIX_SMPS_BASE_VOLT_STD_MODE_UV,
-	.step = 12660, /* 10 mV represented in uV */
+	.step = 12660, /* 12.66 mV represented in uV */
 	/* The code starts at 1 not 0 */
 	.start_code = 1,
 };
 
 struct pmic_data twl6030 = {
 	.base_offset = PHOENIX_SMPS_BASE_VOLT_STD_MODE_WITH_OFFSET_UV,
-	.step = 12660, /* 10 mV represented in uV */
+	.step = 12660, /* 12.66 mV represented in uV */
 	/* The code starts at 1 not 0 */
 	.start_code = 1,
 };
@@ -271,11 +271,11 @@ struct vcores_data omap4460_volts = {
 
 	.core.value = 1200,
 	.core.addr = SMPS_REG_ADDR_VCORE1,
-	.core.pmic = &tps62361,
+	.core.pmic = &twl6030,
 
 	.mm.value = 1200,
 	.mm.addr = SMPS_REG_ADDR_VCORE2,
-	.mm.pmic = &tps62361,
+	.mm.pmic = &twl6030,
 };
 
 /*
diff --git a/arch/arm/cpu/armv7/omap5/emif.c b/arch/arm/cpu/armv7/omap5/emif.c
index 8019ffe3d3..3f37abdf83 100644
--- a/arch/arm/cpu/armv7/omap5/emif.c
+++ b/arch/arm/cpu/armv7/omap5/emif.c
@@ -34,7 +34,6 @@
 #define print_timing_reg(reg) debug(#reg" - 0x%08x\n", (reg))
 static u32 *const T_num = (u32 *)OMAP5_SRAM_SCRATCH_EMIF_T_NUM;
 static u32 *const T_den = (u32 *)OMAP5_SRAM_SCRATCH_EMIF_T_DEN;
-static u32 *const emif_sizes = (u32 *)OMAP5_SRAM_SCRATCH_EMIF_SIZE;
 #endif
 
 #ifdef CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
diff --git a/arch/arm/cpu/armv7/s5p-common/pwm.c b/arch/arm/cpu/armv7/s5p-common/pwm.c
index 44d7bc360e..6f401b8d9e 100644
--- a/arch/arm/cpu/armv7/s5p-common/pwm.c
+++ b/arch/arm/cpu/armv7/s5p-common/pwm.c
@@ -70,7 +70,7 @@ static unsigned long pwm_calc_tin(int pwm_id, unsigned long freq)
 	return tin_parent_rate / 16;
 }
 
-#define NS_IN_HZ (1000000000UL)
+#define NS_IN_SEC 1000000000UL
 
 int pwm_config(int pwm_id, int duty_ns, int period_ns)
 {
@@ -79,7 +79,7 @@ int pwm_config(int pwm_id, int duty_ns, int period_ns)
 	unsigned int offset;
 	unsigned long tin_rate;
 	unsigned long tin_ns;
-	unsigned long period;
+	unsigned long frequency;
 	unsigned long tcon;
 	unsigned long tcnt;
 	unsigned long tcmp;
@@ -89,34 +89,24 @@ int pwm_config(int pwm_id, int duty_ns, int period_ns)
 	 * fact that anything faster than 1GHz is easily representable
 	 * by 32bits.
 	 */
-	if (period_ns > NS_IN_HZ || duty_ns > NS_IN_HZ)
+	if (period_ns > NS_IN_SEC || duty_ns > NS_IN_SEC || period_ns == 0)
 		return -ERANGE;
 
 	if (duty_ns > period_ns)
 		return -EINVAL;
 
-	period = NS_IN_HZ / period_ns;
+	frequency = NS_IN_SEC / period_ns;
 
 	/* Check to see if we are changing the clock rate of the PWM */
-	tin_rate = pwm_calc_tin(pwm_id, period);
+	tin_rate = pwm_calc_tin(pwm_id, frequency);
 
-	tin_ns = NS_IN_HZ / tin_rate;
+	tin_ns = NS_IN_SEC / tin_rate;
 	tcnt = period_ns / tin_ns;
 
 	/* Note, counters count down */
 	tcmp = duty_ns / tin_ns;
 	tcmp = tcnt - tcmp;
 
-	/*
-	 * the pwm hw only checks the compare register after a decrement,
-	 * so the pin never toggles if tcmp = tcnt
-	 */
-	if (tcmp == tcnt)
-		tcmp--;
-
-	if (tcmp < 0)
-		tcmp = 0;
-
 	/* Update the PWM register block. */
 	offset = pwm_id * 3;
 	if (pwm_id < 4) {
@@ -143,7 +133,7 @@ int pwm_init(int pwm_id, int div, int invert)
 	u32 val;
 	const struct s5p_timer *pwm =
 			(struct s5p_timer *)samsung_get_base_timer();
-	unsigned long timer_rate_hz;
+	unsigned long ticks_per_period;
 	unsigned int offset, prescaler;
 
 	/*
@@ -167,14 +157,24 @@ int pwm_init(int pwm_id, int div, int invert)
 	val |= (div & 0xf) << MUX_DIV_SHIFT(pwm_id);
 	writel(val, &pwm->tcfg1);
 
-	timer_rate_hz = get_pwm_clk() / ((prescaler + 1) *
-			(div + 1));
+	if (pwm_id == 4) {
+		/*
+		 * TODO(sjg): Use this as a countdown timer for now. We count
+		 * down from the maximum value to 0, then reset.
+		 */
+		ticks_per_period = -1UL;
+	} else {
+		const unsigned long pwm_hz = 1000;
+		unsigned long timer_rate_hz = get_pwm_clk() /
+			((prescaler + 1) * (1 << div));
 
-	timer_rate_hz = timer_rate_hz / CONFIG_SYS_HZ;
+		ticks_per_period = timer_rate_hz / pwm_hz;
+	}
 
 	/* set count value */
 	offset = pwm_id * 3;
-	writel(timer_rate_hz, &pwm->tcntb0 + offset);
+
+	writel(ticks_per_period, &pwm->tcntb0 + offset);
 
 	val = readl(&pwm->tcon) & ~(0xf << TCON_OFFSET(pwm_id));
 	if (invert && (pwm_id < 4))
diff --git a/arch/arm/cpu/armv7/s5p-common/timer.c b/arch/arm/cpu/armv7/s5p-common/timer.c
index e78c716d3f..6a0fa5862e 100644
--- a/arch/arm/cpu/armv7/s5p-common/timer.c
+++ b/arch/arm/cpu/armv7/s5p-common/timer.c
@@ -39,13 +39,33 @@ static inline struct s5p_timer *s5p_get_base_timer(void)
 	return (struct s5p_timer *)samsung_get_base_timer();
 }
 
+/**
+ * Read the countdown timer.
+ *
+ * This operates at 1MHz and counts downwards. It will wrap about every
+ * hour (2^32 microseconds).
+ *
+ * @return current value of timer
+ */
+static unsigned long timer_get_us_down(void)
+{
+	struct s5p_timer *const timer = s5p_get_base_timer();
+
+	return readl(&timer->tcnto4);
+}
+
 int timer_init(void)
 {
 	/* PWM Timer 4 */
-	pwm_init(4, MUX_DIV_2, 0);
-	pwm_config(4, 0, 0);
+	pwm_init(4, MUX_DIV_4, 0);
+	pwm_config(4, 100000, 100000);
 	pwm_enable(4);
 
+	/* Use this as the current monotonic time in us */
+	gd->arch.timer_reset_value = 0;
+
+	/* Use this as the last timer value we saw */
+	gd->arch.lastinc = timer_get_us_down();
 	reset_timer_masked();
 
 	return 0;
@@ -56,81 +76,52 @@ int timer_init(void)
  */
 unsigned long get_timer(unsigned long base)
 {
-	return get_timer_masked() - base;
-}
+	ulong now = timer_get_us_down();
+
+	/*
+	 * Increment the time by the amount elapsed since the last read.
+	 * The timer may have wrapped around, but it makes no difference to
+	 * our arithmetic here.
+	 */
+	gd->arch.timer_reset_value += gd->arch.lastinc - now;
+	gd->arch.lastinc = now;
 
-/* delay x useconds */
-void __udelay(unsigned long usec)
-{
-	struct s5p_timer *const timer = s5p_get_base_timer();
-	unsigned long tmo, tmp, count_value;
-
-	count_value = readl(&timer->tcntb4);
-
-	if (usec >= 1000) {
-		/*
-		 * if "big" number, spread normalization
-		 * to seconds
-		 * 1. start to normalize for usec to ticks per sec
-		 * 2. find number of "ticks" to wait to achieve target
-		 * 3. finish normalize.
-		 */
-		tmo = usec / 1000;
-		tmo *= (CONFIG_SYS_HZ * count_value);
-		tmo /= 1000;
-	} else {
-		/* else small number, don't kill it prior to HZ multiply */
-		tmo = usec * CONFIG_SYS_HZ * count_value;
-		tmo /= (1000 * 1000);
-	}
-
-	/* get current timestamp */
-	tmp = get_current_tick();
-
-	/* if setting this fordward will roll time stamp */
-	/* reset "advancing" timestamp to 0, set lastinc value */
-	/* else, set advancing stamp wake up time */
-	if ((tmo + tmp + 1) < tmp)
-		reset_timer_masked();
-	else
-		tmo += tmp;
-
-	/* loop till event */
-	while (get_current_tick() < tmo)
-		;	/* nop */
+	/* Divide by 1000 to convert from us to ms */
+	return gd->arch.timer_reset_value / 1000 - base;
 }
 
-void reset_timer_masked(void)
+unsigned long timer_get_us(void)
 {
-	struct s5p_timer *const timer = s5p_get_base_timer();
+	static unsigned long base_time_us;
 
-	/* reset time */
-	gd->arch.lastinc = readl(&timer->tcnto4);
-	gd->arch.tbl = 0;
+	struct s5p_timer *const timer =
+		(struct s5p_timer *)samsung_get_base_timer();
+	unsigned long now_downward_us = readl(&timer->tcnto4);
+
+	if (!base_time_us)
+		base_time_us = now_downward_us;
+
+	/* Note that this timer counts downward. */
+	return base_time_us - now_downward_us;
 }
 
-unsigned long get_timer_masked(void)
+/* delay x useconds */
+void __udelay(unsigned long usec)
 {
-	struct s5p_timer *const timer = s5p_get_base_timer();
-	unsigned long count_value = readl(&timer->tcntb4);
+	unsigned long count_value;
 
-	return get_current_tick() / count_value;
+	count_value = timer_get_us_down();
+	while ((int)(count_value - timer_get_us_down()) < (int)usec)
+		;
 }
 
-unsigned long get_current_tick(void)
+void reset_timer_masked(void)
 {
 	struct s5p_timer *const timer = s5p_get_base_timer();
-	unsigned long now = readl(&timer->tcnto4);
-	unsigned long count_value = readl(&timer->tcntb4);
-
-	if (gd->arch.lastinc >= now)
-		gd->arch.tbl += gd->arch.lastinc - now;
-	else
-		gd->arch.tbl += gd->arch.lastinc + count_value - now;
-
-	gd->arch.lastinc = now;
 
-	return gd->arch.tbl;
+	/* reset time */
+	gd->arch.lastinc = readl(&timer->tcnto4);
+	gd->arch.tbl = 0;
 }
 
 /*
diff --git a/arch/arm/cpu/armv7/socfpga/u-boot-spl.lds b/arch/arm/cpu/armv7/socfpga/u-boot-spl.lds
index 79cc93cb57..15f8c01a9a 100644
--- a/arch/arm/cpu/armv7/socfpga/u-boot-spl.lds
+++ b/arch/arm/cpu/armv7/socfpga/u-boot-spl.lds
@@ -27,7 +27,7 @@ SECTIONS
 	. = ALIGN(4);
 	.text	:
 	{
-		arch/arm/cpu/armv7/start.o	(.text)
+		arch/arm/cpu/armv7/start.o	(.text*)
 		*(.text*)
 	} >.sdram
 
diff --git a/arch/arm/cpu/armv7/start.S b/arch/arm/cpu/armv7/start.S
index 36a4c3cfda..61da7acde9 100644
--- a/arch/arm/cpu/armv7/start.S
+++ b/arch/arm/cpu/armv7/start.S
@@ -81,7 +81,11 @@ _end_vect:
 
 .globl _TEXT_BASE
 _TEXT_BASE:
+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE)
+	.word	CONFIG_SPL_TEXT_BASE
+#else
 	.word	CONFIG_SYS_TEXT_BASE
+#endif
 
 /*
  * These are defined in the board-specific linker script.
@@ -90,9 +94,9 @@ _TEXT_BASE:
 _bss_start_ofs:
 	.word __bss_start - _start
 
-.global	_image_copy_end_ofs
+.globl _image_copy_end_ofs
 _image_copy_end_ofs:
-	.word 	__image_copy_end - _start
+	.word __image_copy_end - _start
 
 .globl _bss_end_ofs
 _bss_end_ofs:
@@ -161,28 +165,23 @@ reset:
 
 #ifndef CONFIG_SPL_BUILD
 /*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
+ * void relocate_code(addr_moni)
  *
+ * This function relocates the monitor code.
  */
 ENTRY(relocate_code)
-	mov	r4, r0	/* save addr_sp */
-	mov	r5, r1	/* save addr of gd */
-	mov	r6, r2	/* save addr of destination */
+	mov	r6, r0	/* save addr of destination */
 
 	adr	r0, _start
-	cmp	r0, r6
-	moveq	r9, #0		/* no relocation. relocation offset(r9) = 0 */
+	subs	r9, r6, r0		/* r9 <- relocation offset */
 	beq	relocate_done		/* skip relocation */
 	mov	r1, r6			/* r1 <- scratch for copy_loop */
 	ldr	r3, _image_copy_end_ofs
 	add	r2, r0, r3		/* r2 <- source end address	    */
 
 copy_loop:
-	ldmia	r0!, {r9-r10}		/* copy from source address [r0]    */
-	stmia	r1!, {r9-r10}		/* copy to   target address [r1]    */
+	ldmia	r0!, {r10-r11}		/* copy from source address [r0]    */
+	stmia	r1!, {r10-r11}		/* copy to   target address [r1]    */
 	cmp	r0, r2			/* until source end address [r2]    */
 	blo	copy_loop
 
@@ -190,7 +189,6 @@ copy_loop:
 	 * fix .rel.dyn relocations
 	 */
 	ldr	r0, _TEXT_BASE		/* r0 <- Text base */
-	sub	r9, r6, r0		/* r9 <- relocation offset */
 	ldr	r10, _dynsym_start_ofs	/* r10 <- sym table ofs */
 	add	r10, r10, r0		/* r10 <- sym table in FLASH */
 	ldr	r2, _rel_dyn_start_ofs	/* r2 <- rel dyn start ofs */
@@ -465,9 +463,10 @@ ENDPROC(cpu_init_crit)
 						@ spots for abort stack
 	str	lr, [r0]			@ save caller lr in position 0
 						@ of saved stack
-	mrs	r0, spsr			@ get the spsr
+	mrs	lr, spsr			@ get the spsr
 	str	lr, [r0, #4]			@ save spsr in position 1 of
 						@ saved stack
+	ldr	lr, [r0]			@ restore lr
 	ldr	r0, [r13]			@ restore r0
 	add	r13, r13, #4			@ pop stack entry
 	.endm
diff --git a/arch/arm/cpu/ixp/start.S b/arch/arm/cpu/ixp/start.S
index b7259645e5..69ef8aa61f 100644
--- a/arch/arm/cpu/ixp/start.S
+++ b/arch/arm/cpu/ixp/start.S
@@ -98,7 +98,11 @@ _fiq:			.word fiq
 
 .globl _TEXT_BASE
 _TEXT_BASE:
+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE)
+	.word	CONFIG_SPL_TEXT_BASE
+#else
 	.word	CONFIG_SYS_TEXT_BASE
+#endif
 
 /*
  * These are defined in the board-specific linker script.
@@ -110,6 +114,10 @@ _TEXT_BASE:
 _bss_start_ofs:
 	.word __bss_start - _start
 
+.globl _image_copy_end_ofs
+_image_copy_end_ofs:
+	.word __image_copy_end - _start
+
 .globl _bss_end_ofs
 _bss_end_ofs:
 	.word __bss_end - _start
@@ -250,29 +258,24 @@ reset:
 /*------------------------------------------------------------------------------*/
 
 /*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
+ * void relocate_code(addr_moni)
  *
+ * This function relocates the monitor code.
  */
 	.globl	relocate_code
 relocate_code:
-	mov	r4, r0	/* save addr_sp */
-	mov	r5, r1	/* save addr of gd */
-	mov	r6, r2	/* save addr of destination */
+	mov	r6, r0	/* save addr of destination */
 
 	adr	r0, _start
-	cmp	r0, r6
-	moveq	r9, #0		/* no relocation. relocation offset(r9) = 0 */
+	subs	r9, r6, r0		/* r9 <- relocation offset */
 	beq	relocate_done		/* skip relocation */
 	mov	r1, r6			/* r1 <- scratch for copy_loop */
-	ldr	r3, _bss_start_ofs
+	ldr	r3, _image_copy_end_ofs
 	add	r2, r0, r3		/* r2 <- source end address	    */
 
 copy_loop:
-	ldmia	r0!, {r9-r10}		/* copy from source address [r0]    */
-	stmia	r1!, {r9-r10}		/* copy to   target address [r1]    */
+	ldmia	r0!, {r10-r11}		/* copy from source address [r0]    */
+	stmia	r1!, {r10-r11}		/* copy to   target address [r1]    */
 	cmp	r0, r2			/* until source end address [r2]    */
 	blo	copy_loop
 
@@ -281,7 +284,6 @@ copy_loop:
 	 * fix .rel.dyn relocations
 	 */
 	ldr	r0, _TEXT_BASE		/* r0 <- Text base */
-	sub	r9, r6, r0		/* r9 <- relocation offset */
 	ldr	r10, _dynsym_start_ofs	/* r10 <- sym table ofs */
 	add	r10, r10, r0		/* r10 <- sym table in FLASH */
 	ldr	r2, _rel_dyn_start_ofs	/* r2 <- rel dyn start ofs */
diff --git a/arch/arm/cpu/ixp/u-boot.lds b/arch/arm/cpu/ixp/u-boot.lds
index 8345b55032..553589ca6c 100644
--- a/arch/arm/cpu/ixp/u-boot.lds
+++ b/arch/arm/cpu/ixp/u-boot.lds
@@ -54,6 +54,8 @@ SECTIONS
 
 	. = ALIGN(4);
 
+	__image_copy_end = .;
+
 	.rel.dyn : {
 		__rel_dyn_start = .;
 		*(.rel*)
@@ -67,17 +69,23 @@ SECTIONS
 
 	_end = .;
 
+/*
+ * Compiler-generated __bss_start and __bss_end, see arch/arm/lib/bss.c
+ * __bss_base and __bss_limit are for linker only (overlay ordering)
+ */
+
 	.bss_start __rel_dyn_start (OVERLAY) : {
 		KEEP(*(.__bss_start));
+		__bss_base = .;
 	}
 
-	.bss __bss_start (OVERLAY) : {
+	.bss __bss_base (OVERLAY) : {
 		*(.bss*)
 		 . = ALIGN(4);
-		 __bss_end = .;
+		 __bss_limit = .;
 	}
-	.bss_end __bss_end (OVERLAY) : {
-		KEEP(*(__bss_end));
+	.bss_end __bss_limit (OVERLAY) : {
+		KEEP(*(.__bss_end));
 	}
 
 	/DISCARD/ : { *(.dynstr*) }
diff --git a/arch/arm/cpu/pxa/start.S b/arch/arm/cpu/pxa/start.S
index 456a7836da..ada91a66c9 100644
--- a/arch/arm/cpu/pxa/start.S
+++ b/arch/arm/cpu/pxa/start.S
@@ -102,7 +102,7 @@ _end_vect:
 
 .globl _TEXT_BASE
 _TEXT_BASE:
-#ifdef	CONFIG_SPL_BUILD
+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE)
 	.word	CONFIG_SPL_TEXT_BASE
 #else
 	.word	CONFIG_SYS_TEXT_BASE
@@ -118,6 +118,10 @@ _TEXT_BASE:
 _bss_start_ofs:
 	.word __bss_start - _start
 
+.globl _image_copy_end_ofs
+_image_copy_end_ofs:
+	.word __image_copy_end - _start
+
 .globl _bss_end_ofs
 _bss_end_ofs:
 	.word __bss_end - _start
@@ -169,17 +173,13 @@ reset:
 /*------------------------------------------------------------------------------*/
 #ifndef CONFIG_SPL_BUILD
 /*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
+ * void relocate_code(addr_moni)
  *
+ * This function relocates the monitor code.
  */
 	.globl	relocate_code
 relocate_code:
-	mov	r4, r0	/* save addr_sp */
-	mov	r5, r1	/* save addr of gd */
-	mov	r6, r2	/* save addr of destination */
+	mov	r6, r0	/* save addr of destination */
 
 /* Disable the Dcache RAM lock for stack now */
 #ifdef	CONFIG_CPU_PXA25X
@@ -189,16 +189,15 @@ relocate_code:
 #endif
 
 	adr	r0, _start
-	cmp	r0, r6
-	moveq	r9, #0		/* no relocation. relocation offset(r9) = 0 */
+	subs	r9, r6, r0		/* r9 <- relocation offset */
 	beq	relocate_done		/* skip relocation */
 	mov	r1, r6			/* r1 <- scratch for copy_loop */
-	ldr	r3, _bss_start_ofs
+	ldr	r3, _image_copy_end_ofs
 	add	r2, r0, r3		/* r2 <- source end address	    */
 
 copy_loop:
-	ldmia	r0!, {r9-r10}		/* copy from source address [r0]    */
-	stmia	r1!, {r9-r10}		/* copy to   target address [r1]    */
+	ldmia	r0!, {r10-r11}		/* copy from source address [r0]    */
+	stmia	r1!, {r10-r11}		/* copy to   target address [r1]    */
 	cmp	r0, r2			/* until source end address [r2]    */
 	blo	copy_loop
 
@@ -207,7 +206,6 @@ copy_loop:
 	 * fix .rel.dyn relocations
 	 */
 	ldr	r0, _TEXT_BASE		/* r0 <- Text base */
-	sub	r9, r6, r0		/* r9 <- relocation offset */
 	ldr	r10, _dynsym_start_ofs	/* r10 <- sym table ofs */
 	add	r10, r10, r0		/* r10 <- sym table in FLASH */
 	ldr	r2, _rel_dyn_start_ofs	/* r2 <- rel dyn start ofs */
@@ -387,8 +385,9 @@ cpu_init_crit:
 	str	r0, [r13]			@ save R0's value.
 	ldr	r0, IRQ_STACK_START_IN		@ get data regions start
 	str	lr, [r0]			@ save caller lr in position 0 of saved stack
-	mrs	r0, spsr			@ get the spsr
+	mrs	lr, spsr			@ get the spsr
 	str	lr, [r0, #4]			@ save spsr in position 1 of saved stack
+	ldr	lr, [r0]			@ restore lr
 	ldr	r0, [r13]			@ restore r0
 	add	r13, r13, #4			@ pop stack entry
 	.endm
diff --git a/arch/arm/cpu/s3c44b0/start.S b/arch/arm/cpu/s3c44b0/start.S
index c096177086..7361aa268a 100644
--- a/arch/arm/cpu/s3c44b0/start.S
+++ b/arch/arm/cpu/s3c44b0/start.S
@@ -64,7 +64,11 @@ _start:	b       reset
 
 .globl _TEXT_BASE
 _TEXT_BASE:
+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE)
+	.word	CONFIG_SPL_TEXT_BASE
+#else
 	.word	CONFIG_SYS_TEXT_BASE
+#endif
 
 /*
  * These are defined in the board-specific linker script.
@@ -76,6 +80,10 @@ _TEXT_BASE:
 _bss_start_ofs:
 	.word __bss_start - _start
 
+.globl _image_copy_end_ofs
+_image_copy_end_ofs:
+	.word __image_copy_end - _start
+
 .globl _bss_end_ofs
 _bss_end_ofs:
 	.word __bss_end - _start
@@ -133,29 +141,24 @@ reset:
 /*------------------------------------------------------------------------------*/
 
 /*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
+ * void relocate_code(addr_moni)
  *
+ * This function relocates the monitor code.
  */
 	.globl	relocate_code
 relocate_code:
-	mov	r4, r0	/* save addr_sp */
-	mov	r5, r1	/* save addr of gd */
-	mov	r6, r2	/* save addr of destination */
+	mov	r6, r0	/* save addr of destination */
 
 	adr	r0, _start
-	cmp	r0, r6
-	moveq	r9, #0		/* no relocation. relocation offset(r9) = 0 */
+	subs	r9, r6, r0		/* r9 <- relocation offset */
 	beq	relocate_done		/* skip relocation */
 	mov	r1, r6			/* r1 <- scratch for copy_loop */
-	ldr	r3, _bss_start_ofs
+	ldr	r3, _image_copy_end_ofs
 	add	r2, r0, r3		/* r2 <- source end address	    */
 
 copy_loop:
-	ldmia	r0!, {r9-r10}		/* copy from source address [r0]    */
-	stmia	r1!, {r9-r10}		/* copy to   target address [r1]    */
+	ldmia	r0!, {r10-r11}		/* copy from source address [r0]    */
+	stmia	r1!, {r10-r11}		/* copy to   target address [r1]    */
 	cmp	r0, r2			/* until source end address [r2]    */
 	blo	copy_loop
 
@@ -164,7 +167,6 @@ copy_loop:
 	 * fix .rel.dyn relocations
 	 */
 	ldr	r0, _TEXT_BASE		/* r0 <- Text base */
-	sub	r9, r6, r0		/* r9 <- relocation offset */
 	ldr	r10, _dynsym_start_ofs	/* r10 <- sym table ofs */
 	add	r10, r10, r0		/* r10 <- sym table in FLASH */
 	ldr	r2, _rel_dyn_start_ofs	/* r2 <- rel dyn start ofs */
diff --git a/arch/arm/cpu/sa1100/start.S b/arch/arm/cpu/sa1100/start.S
index 4bf6f5fe97..8a2eafd6a4 100644
--- a/arch/arm/cpu/sa1100/start.S
+++ b/arch/arm/cpu/sa1100/start.S
@@ -74,7 +74,11 @@ _fiq:			.word fiq
 
 .globl _TEXT_BASE
 _TEXT_BASE:
+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE)
+	.word	CONFIG_SPL_TEXT_BASE
+#else
 	.word	CONFIG_SYS_TEXT_BASE
+#endif
 
 /*
  * These are defined in the board-specific linker script.
@@ -86,6 +90,10 @@ _TEXT_BASE:
 _bss_start_ofs:
 	.word __bss_start - _start
 
+.globl _image_copy_end_ofs
+_image_copy_end_ofs:
+	.word __image_copy_end - _start
+
 .globl _bss_end_ofs
 _bss_end_ofs:
 	.word __bss_end - _start
@@ -137,29 +145,24 @@ reset:
 /*------------------------------------------------------------------------------*/
 
 /*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
+ * void relocate_code(addr_moni)
  *
+ * This function relocates the monitor code.
  */
 	.globl	relocate_code
 relocate_code:
-	mov	r4, r0	/* save addr_sp */
-	mov	r5, r1	/* save addr of gd */
-	mov	r6, r2	/* save addr of destination */
+	mov	r6, r0	/* save addr of destination */
 
 	adr	r0, _start
-	cmp	r0, r6
-	moveq	r9, #0		/* no relocation. relocation offset(r9) = 0 */
+	subs	r9, r6, r0		/* r9 <- relocation offset */
 	beq	relocate_done		/* skip relocation */
 	mov	r1, r6			/* r1 <- scratch for copy_loop */
-	ldr	r3, _bss_start_ofs
+	ldr	r3, _image_copy_end_ofs
 	add	r2, r0, r3		/* r2 <- source end address	    */
 
 copy_loop:
-	ldmia	r0!, {r9-r10}		/* copy from source address [r0]    */
-	stmia	r1!, {r9-r10}		/* copy to   target address [r1]    */
+	ldmia	r0!, {r10-r11}		/* copy from source address [r0]    */
+	stmia	r1!, {r10-r11}		/* copy to   target address [r1]    */
 	cmp	r0, r2			/* until source end address [r2]    */
 	blo	copy_loop
 
@@ -168,7 +171,6 @@ copy_loop:
 	 * fix .rel.dyn relocations
 	 */
 	ldr	r0, _TEXT_BASE		/* r0 <- Text base */
-	sub	r9, r6, r0		/* r9 <- relocation offset */
 	ldr	r10, _dynsym_start_ofs	/* r10 <- sym table ofs */
 	add	r10, r10, r0		/* r10 <- sym table in FLASH */
 	ldr	r2, _rel_dyn_start_ofs	/* r2 <- rel dyn start ofs */
diff --git a/arch/arm/cpu/u-boot-spl.lds b/arch/arm/cpu/u-boot-spl.lds
index 3c0d99ca36..1408f03b23 100644
--- a/arch/arm/cpu/u-boot-spl.lds
+++ b/arch/arm/cpu/u-boot-spl.lds
@@ -65,15 +65,6 @@ SECTIONS
 
 	_end = .;
 
-	/*
-	 * Deprecated: this MMU section is used by pxa at present but
-	 * should not be used by new boards/CPUs.
-	 */
-	. = ALIGN(4096);
-	.mmutable : {
-		*(.mmutable)
-	}
-
 	.bss __rel_dyn_start (OVERLAY) : {
 		__bss_start = .;
 		*(.bss*)
@@ -88,6 +79,17 @@ SECTIONS
 	/DISCARD/ : { *(.gnu*) }
 }
 
-#if defined(CONFIG_SPL_TEXT_BASE) && defined(CONFIG_SPL_MAX_SIZE)
-ASSERT(__bss_end < (CONFIG_SPL_TEXT_BASE + CONFIG_SPL_MAX_SIZE), "SPL image too big");
+#if defined(CONFIG_SPL_MAX_SIZE)
+ASSERT(__image_copy_end - __image_copy_start < (CONFIG_SPL_MAX_SIZE), \
+	"SPL image too big");
+#endif
+
+#if defined(CONFIG_SPL_BSS_MAX_SIZE)
+ASSERT(__bss_end - __bss_start < (CONFIG_SPL_BSS_MAX_SIZE), \
+	"SPL image BSS too big");
+#endif
+
+#if defined(CONFIG_SPL_MAX_FOOTPRINT)
+ASSERT(__bss_end - _start < (CONFIG_SPL_MAX_FOOTPRINT), \
+	"SPL image plus BSS too big");
 #endif
diff --git a/arch/arm/cpu/u-boot.lds b/arch/arm/cpu/u-boot.lds
index 3a1083d9a9..d9bbee3b27 100644
--- a/arch/arm/cpu/u-boot.lds
+++ b/arch/arm/cpu/u-boot.lds
@@ -81,18 +81,24 @@ SECTIONS
 		*(.mmutable)
 	}
 
+/*
+ * Compiler-generated __bss_start and __bss_end, see arch/arm/lib/bss.c
+ * __bss_base and __bss_limit are for linker only (overlay ordering)
+ */
+
 	.bss_start __rel_dyn_start (OVERLAY) : {
 		KEEP(*(.__bss_start));
+		__bss_base = .;
 	}
 
-	.bss __bss_start (OVERLAY) : {
+	.bss __bss_base (OVERLAY) : {
 		*(.bss*)
 		 . = ALIGN(4);
-		 __bss_end = .;
+		 __bss_limit = .;
 	}
 
-	.bss_end __bss_end (OVERLAY) : {
-		KEEP(*(__bss_end));
+	.bss_end __bss_limit (OVERLAY) : {
+		KEEP(*(.__bss_end));
 	}
 
 	/DISCARD/ : { *(.dynstr*) }
@@ -101,7 +107,3 @@ SECTIONS
 	/DISCARD/ : { *(.interp*) }
 	/DISCARD/ : { *(.gnu*) }
 }
-
-#if defined(CONFIG_SPL_TEXT_BASE) && defined(CONFIG_SPL_MAX_SIZE)
-ASSERT(__bss_end < (CONFIG_SPL_TEXT_BASE + CONFIG_SPL_MAX_SIZE), "SPL image too big");
-#endif
diff --git a/arch/arm/dts/exynos5250.dtsi b/arch/arm/dts/exynos5250.dtsi
index 61d35a83ea..df4b231cf3 100644
--- a/arch/arm/dts/exynos5250.dtsi
+++ b/arch/arm/dts/exynos5250.dtsi
@@ -156,4 +156,17 @@
 		reg = <0x10060000 0x10000>;
 	};
 
+	fimd@14400000 {
+		compatible = "samsung,exynos-fimd";
+		reg = <0x14400000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	dp@145b0000 {
+		compatible = "samsung,exynos5-dp";
+		reg = <0x145b0000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
 };
diff --git a/arch/arm/imx-common/Makefile b/arch/arm/imx-common/Makefile
index 6309fcdfe6..44b6822805 100644
--- a/arch/arm/imx-common/Makefile
+++ b/arch/arm/imx-common/Makefile
@@ -32,6 +32,7 @@ COBJS-y	= iomux-v3.o timer.o cpu.o speed.o
 COBJS-$(CONFIG_I2C_MXC) += i2c-mxv7.o
 endif
 COBJS-$(CONFIG_CMD_BMODE) += cmd_bmode.o
+COBJS-$(CONFIG_CMD_HDMIDETECT) += cmd_hdmidet.o
 COBJS	:= $(sort $(COBJS-y))
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
@@ -54,6 +55,23 @@ $(OBJTREE)/SPL: $(OBJTREE)/spl/u-boot-spl.bin $(OBJTREE)/$(patsubst "%",%,$(CONF
 	$(OBJTREE)/tools/mkimage -n $(filter-out %.bin,$^) -T imximage \
 	-e $(CONFIG_SPL_TEXT_BASE) -d $< $@
 
+$(OBJTREE)/u-boot-with-spl.imx: $(OBJTREE)/SPL $(OBJTREE)/u-boot.bin
+	$(OBJCOPY) ${OBJCFLAGS} --pad-to=$(CONFIG_SPL_PAD_TO) \
+		-I binary -O binary $< $(OBJTREE)/spl/u-boot-spl-pad.imx
+	cat $(OBJTREE)/spl/u-boot-spl-pad.imx $(OBJTREE)/u-boot.bin > $@
+	rm $(OBJTREE)/spl/u-boot-spl-pad.imx
+
+$(OBJTREE)/u-boot-with-nand-spl.imx: $(OBJTREE)/SPL $(OBJTREE)/u-boot.bin
+	(echo -ne '\x00\x00\x00\x00\x46\x43\x42\x20\x01' && \
+			dd bs=1015 count=1 if=/dev/zero 2>/dev/null) | \
+		cat - $< > $(OBJTREE)/spl/u-boot-nand-spl.imx
+	$(OBJCOPY) ${OBJCFLAGS} --pad-to=$(CONFIG_SPL_PAD_TO) \
+		-I binary -O binary $(OBJTREE)/spl/u-boot-nand-spl.imx \
+		$(OBJTREE)/spl/u-boot-nand-spl-pad.imx
+	rm $(OBJTREE)/spl/u-boot-nand-spl.imx
+	cat $(OBJTREE)/spl/u-boot-nand-spl-pad.imx $(OBJTREE)/u-boot.bin > $@
+	rm $(OBJTREE)/spl/u-boot-nand-spl-pad.imx
+
 
 #########################################################################
 
diff --git a/arch/arm/cpu/arm1176/s3c64xx/reset.S b/arch/arm/imx-common/cmd_hdmidet.c
index eae572e4fd..794bf50cb6 100644
--- a/arch/arm/cpu/arm1176/s3c64xx/reset.S
+++ b/arch/arm/imx-common/cmd_hdmidet.c
@@ -1,6 +1,5 @@
 /*
- * Copyright (c) 2009 Samsung Electronics.
- * Minkyu Kang <mk7.kang@samsung.com>
+ * Copyright (C) 2012 Boundary Devices Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -12,7 +11,7 @@
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
@@ -20,15 +19,19 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */
+#include <common.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/mxc_hdmi.h>
+#include <asm/io.h>
 
-#include <asm/arch/s3c6400.h>
+static int do_hdmidet(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+	struct hdmi_regs *hdmi	= (struct hdmi_regs *)HDMI_ARB_BASE_ADDR;
+	u8 reg = readb(&hdmi->phy_stat0) & HDMI_PHY_HPD;
+	return (reg&HDMI_PHY_HPD) ? 0 : 1;
+}
 
-.globl reset_cpu
-reset_cpu:
-	ldr	r1, =ELFIN_CLOCK_POWER_BASE
-	ldr	r2, [r1, #SYS_ID_OFFSET]
-	ldr	r3, =0xffff
-	and	r2, r3, r2, lsr #12
-	str	r2, [r1, #SW_RST_OFFSET]
-_loop_forever:
-	b	_loop_forever
+U_BOOT_CMD(hdmidet, 1, 1, do_hdmidet,
+	"detect HDMI monitor",
+	""
+);
diff --git a/arch/arm/imx-common/timer.c b/arch/arm/imx-common/timer.c
index ab37d641ec..1dbc413d46 100644
--- a/arch/arm/imx-common/timer.c
+++ b/arch/arm/imx-common/timer.c
@@ -48,9 +48,6 @@ static struct mxc_gpt *cur_gpt = (struct mxc_gpt *)GPT1_BASE_ADDR;
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#define timestamp (gd->arch.tbl)
-#define lastinc (gd->arch.lastinc)
-
 static inline unsigned long long tick_to_time(unsigned long long tick)
 {
 	tick *= CONFIG_SYS_HZ;
@@ -70,7 +67,6 @@ static inline unsigned long long us_to_tick(unsigned long long usec)
 int timer_init(void)
 {
 	int i;
-	ulong val;
 
 	/* setup GP Timer 1 */
 	__raw_writel(GPTCR_SWR, &cur_gpt->control);
@@ -85,9 +81,8 @@ int timer_init(void)
 	i = __raw_readl(&cur_gpt->control);
 	__raw_writel(i | GPTCR_CLKSOURCE_32 | GPTCR_TEN, &cur_gpt->control);
 
-	val = __raw_readl(&cur_gpt->counter);
-	lastinc = val / (MXC_CLK32 / CONFIG_SYS_HZ);
-	timestamp = 0;
+	gd->arch.tbl = __raw_readl(&cur_gpt->counter);
+	gd->arch.tbu = 0;
 
 	return 0;
 }
@@ -96,18 +91,11 @@ unsigned long long get_ticks(void)
 {
 	ulong now = __raw_readl(&cur_gpt->counter); /* current tick value */
 
-	if (now >= lastinc) {
-		/*
-		 * normal mode (non roll)
-		 * move stamp forward with absolut diff ticks
-		 */
-		timestamp += (now - lastinc);
-	} else {
-		/* we have rollover of incrementer */
-		timestamp += (0xFFFFFFFF - lastinc) + now;
-	}
-	lastinc = now;
-	return timestamp;
+	/* increment tbu if tbl has rolled over */
+	if (now < gd->arch.tbl)
+		gd->arch.tbu++;
+	gd->arch.tbl = now;
+	return (((unsigned long long)gd->arch.tbu) << 32) | gd->arch.tbl;
 }
 
 ulong get_timer_masked(void)
diff --git a/arch/arm/include/asm/arch-am33xx/ddr_defs.h b/arch/arm/include/asm/arch-am33xx/ddr_defs.h
index 260cc3484f..fb4e78edfe 100644
--- a/arch/arm/include/asm/arch-am33xx/ddr_defs.h
+++ b/arch/arm/include/asm/arch-am33xx/ddr_defs.h
@@ -84,20 +84,20 @@
 #define MT41J256M8HX15E_IOCTRL_VALUE		0x18B
 
 /* Micron MT41K256M16HA-125E */
-#define MT41K256M16HA125E_EMIF_READ_LATENCY	0x100006
-#define MT41K256M16HA125E_EMIF_TIM1		0x0888A39B
-#define MT41K256M16HA125E_EMIF_TIM2		0x26517FDA
-#define MT41K256M16HA125E_EMIF_TIM3		0x501F84EF
-#define MT41K256M16HA125E_EMIF_SDCFG		0x61C04BB2
-#define MT41K256M16HA125E_EMIF_SDREF		0x0000093B
+#define MT41K256M16HA125E_EMIF_READ_LATENCY	0x100007
+#define MT41K256M16HA125E_EMIF_TIM1		0x0AAAD4DB
+#define MT41K256M16HA125E_EMIF_TIM2		0x266B7FDA
+#define MT41K256M16HA125E_EMIF_TIM3		0x501F867F
+#define MT41K256M16HA125E_EMIF_SDCFG		0x61C05332
+#define MT41K256M16HA125E_EMIF_SDREF		0xC30
 #define MT41K256M16HA125E_ZQ_CFG		0x50074BE4
 #define MT41K256M16HA125E_DLL_LOCK_DIFF		0x1
-#define MT41K256M16HA125E_RATIO			0x40
+#define MT41K256M16HA125E_RATIO			0x80
 #define MT41K256M16HA125E_INVERT_CLKOUT		0x0
-#define MT41K256M16HA125E_RD_DQS		0x3C
-#define MT41K256M16HA125E_WR_DQS		0x45
-#define MT41K256M16HA125E_PHY_WR_DATA		0x7F
-#define MT41K256M16HA125E_PHY_FIFO_WE		0x9B
+#define MT41K256M16HA125E_RD_DQS		0x38
+#define MT41K256M16HA125E_WR_DQS		0x44
+#define MT41K256M16HA125E_PHY_WR_DATA		0x7D
+#define MT41K256M16HA125E_PHY_FIFO_WE		0x94
 #define MT41K256M16HA125E_IOCTRL_VALUE		0x18B
 
 /* Micron MT41J512M8RH-125 on EVM v1.5 */
diff --git a/arch/arm/include/asm/arch-am33xx/omap_gpmc.h b/arch/arm/include/asm/arch-am33xx/omap_gpmc.h
index 572f9d0b27..d03f1dbd86 100644
--- a/arch/arm/include/asm/arch-am33xx/omap_gpmc.h
+++ b/arch/arm/include/asm/arch-am33xx/omap_gpmc.h
@@ -23,63 +23,7 @@
 #ifndef __ASM_ARCH_OMAP_GPMC_H
 #define __ASM_ARCH_OMAP_GPMC_H
 
-#define GPMC_BUF_EMPTY	0
-#define GPMC_BUF_FULL	1
-
-#define ECCCLEAR	(0x1 << 8)
-#define ECCRESULTREG1	(0x1 << 0)
-#define ECCSIZE512BYTE	0xFF
-#define ECCSIZE1	(ECCSIZE512BYTE << 22)
-#define ECCSIZE0	(ECCSIZE512BYTE << 12)
-#define ECCSIZE0SEL	(0x000 << 0)
-
-/* Generic ECC Layouts */
-/* Large Page x8 NAND device Layout */
-#ifdef GPMC_NAND_ECC_LP_x8_LAYOUT
-#define GPMC_NAND_HW_ECC_LAYOUT {\
-	.eccbytes = 12,\
-	.eccpos = {1, 2, 3, 4, 5, 6, 7, 8,\
-		9, 10, 11, 12},\
-	.oobfree = {\
-		{.offset = 13,\
-		 .length = 51 } } \
-}
-#endif
-
-/* Large Page x16 NAND device Layout */
-#ifdef GPMC_NAND_ECC_LP_x16_LAYOUT
-#define GPMC_NAND_HW_ECC_LAYOUT {\
-	.eccbytes = 12,\
-	.eccpos = {2, 3, 4, 5, 6, 7, 8, 9,\
-		10, 11, 12, 13},\
-	.oobfree = {\
-		{.offset = 14,\
-		 .length = 50 } } \
-}
-#endif
-
-/* Small Page x8 NAND device Layout */
-#ifdef GPMC_NAND_ECC_SP_x8_LAYOUT
-#define GPMC_NAND_HW_ECC_LAYOUT {\
-	.eccbytes = 3,\
-	.eccpos = {1, 2, 3},\
-	.oobfree = {\
-		{.offset = 4,\
-		 .length = 12 } } \
-}
-#endif
-
-/* Small Page x16 NAND device Layout */
-#ifdef GPMC_NAND_ECC_SP_x16_LAYOUT
-#define GPMC_NAND_HW_ECC_LAYOUT {\
-	.eccbytes = 3,\
-	.eccpos = {2, 3, 4},\
-	.oobfree = {\
-		{.offset = 5,\
-		 .length = 11 } } \
-}
-#endif
-
+/* These GPMC_NAND_HW_BCHx_ECC_LAYOUT defines are based on AM33xx ELM */
 #define GPMC_NAND_HW_BCH4_ECC_LAYOUT {\
 	.eccbytes = 32,\
 	.eccpos = {2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,\
diff --git a/arch/arm/include/asm/arch-am33xx/spl.h b/arch/arm/include/asm/arch-am33xx/spl.h
index f60b086366..4c23b271b5 100644
--- a/arch/arm/include/asm/arch-am33xx/spl.h
+++ b/arch/arm/include/asm/arch-am33xx/spl.h
@@ -37,4 +37,12 @@
 #define BOOT_DEVICE_USBETH	68
 #define BOOT_DEVICE_CPGMAC	70
 #define BOOT_DEVICE_MMC2_2      0xFF
+
+#ifdef CONFIG_AM33XX
+#define MMC_BOOT_DEVICES_START	BOOT_DEVICE_MMC1
+#define MMC_BOOT_DEVICES_END	BOOT_DEVICE_MMC2
+#elif defined(CONFIG_TI814X)
+#define MMC_BOOT_DEVICES_START	BOOT_DEVICE_MMC2
+#define MMC_BOOT_DEVICES_END	BOOT_DEVICE_MMC1
+#endif
 #endif
diff --git a/arch/arm/include/asm/arch-am33xx/sys_proto.h b/arch/arm/include/asm/arch-am33xx/sys_proto.h
index 0910a9451a..c913b5f318 100644
--- a/arch/arm/include/asm/arch-am33xx/sys_proto.h
+++ b/arch/arm/include/asm/arch-am33xx/sys_proto.h
@@ -39,5 +39,5 @@ struct gpmc_cs;
 void gpmc_init(void);
 void enable_gpmc_cs_config(const u32 *gpmc_config, struct gpmc_cs *cs, u32 base,
 			u32 size);
-void omap_nand_switch_ecc(int);
+void omap_nand_switch_ecc(uint32_t, uint32_t);
 #endif
diff --git a/arch/arm/include/asm/arch-bcm2835/timer.h b/arch/arm/include/asm/arch-bcm2835/timer.h
index 30c70e03df..c2001b6f93 100644
--- a/arch/arm/include/asm/arch-bcm2835/timer.h
+++ b/arch/arm/include/asm/arch-bcm2835/timer.h
@@ -34,4 +34,6 @@ struct bcm2835_timer_regs {
 #define BCM2835_TIMER_CS_M1	(1 << 1)
 #define BCM2835_TIMER_CS_M0	(1 << 0)
 
+extern ulong get_timer_us(ulong base);
+
 #endif
diff --git a/arch/arm/include/asm/arch-exynos/clk.h b/arch/arm/include/asm/arch-exynos/clk.h
index 1935b0b5b8..73f8063048 100644
--- a/arch/arm/include/asm/arch-exynos/clk.h
+++ b/arch/arm/include/asm/arch-exynos/clk.h
@@ -29,6 +29,12 @@
 #define VPLL	4
 #define BPLL	5
 
+enum pll_src_bit {
+	EXYNOS_SRC_MPLL = 6,
+	EXYNOS_SRC_EPLL,
+	EXYNOS_SRC_VPLL,
+};
+
 unsigned long get_pll_clk(int pllreg);
 unsigned long get_arm_clk(void);
 unsigned long get_i2c_clk(void);
@@ -44,4 +50,13 @@ int set_i2s_clk_prescaler(unsigned int src_frq, unsigned int dst_frq);
 int set_epll_clk(unsigned long rate);
 int set_spi_clk(int periph_id, unsigned int rate);
 
+/**
+ * get the clk frequency of the required peripheral
+ *
+ * @param peripheral	Peripheral id
+ *
+ * @return frequency of the peripheral clk
+ */
+unsigned long clock_get_periph_rate(int peripheral);
+
 #endif
diff --git a/arch/arm/include/asm/arch-exynos/cpu.h b/arch/arm/include/asm/arch-exynos/cpu.h
index eb34422353..f76e4897e9 100644
--- a/arch/arm/include/asm/arch-exynos/cpu.h
+++ b/arch/arm/include/asm/arch-exynos/cpu.h
@@ -62,6 +62,7 @@
 #define EXYNOS4_GPIO_PART4_BASE		DEVICE_NOT_AVAILABLE
 #define EXYNOS4_DP_BASE			DEVICE_NOT_AVAILABLE
 #define EXYNOS4_SPI_ISP_BASE		DEVICE_NOT_AVAILABLE
+#define EXYNOS4_ACE_SFR_BASE		DEVICE_NOT_AVAILABLE
 
 /* EXYNOS4X12 */
 #define EXYNOS4X12_GPIO_PART3_BASE	0x03860000
@@ -92,9 +93,10 @@
 #define EXYNOS4X12_ADC_BASE		DEVICE_NOT_AVAILABLE
 #define EXYNOS4X12_DP_BASE		DEVICE_NOT_AVAILABLE
 #define EXYNOS4X12_MODEM_BASE		DEVICE_NOT_AVAILABLE
-#define EXYNOS4X12_I2S_BASE            DEVICE_NOT_AVAILABLE
-#define EXYNOS4X12_SPI_BASE            DEVICE_NOT_AVAILABLE
-#define EXYNOS4X12_SPI_ISP_BASE                DEVICE_NOT_AVAILABLE
+#define EXYNOS4X12_I2S_BASE		DEVICE_NOT_AVAILABLE
+#define EXYNOS4X12_SPI_BASE		DEVICE_NOT_AVAILABLE
+#define EXYNOS4X12_SPI_ISP_BASE		DEVICE_NOT_AVAILABLE
+#define EXYNOS4X12_ACE_SFR_BASE		DEVICE_NOT_AVAILABLE
 
 /* EXYNOS5 Common*/
 #define EXYNOS5_I2C_SPACING		0x10000
@@ -106,6 +108,7 @@
 #define EXYNOS5_SWRESET			0x10040400
 #define EXYNOS5_SYSREG_BASE		0x10050000
 #define EXYNOS5_WATCHDOG_BASE		0x101D0000
+#define EXYNOS5_ACE_SFR_BASE            0x10830000
 #define EXYNOS5_DMC_PHY0_BASE		0x10C00000
 #define EXYNOS5_DMC_PHY1_BASE		0x10C10000
 #define EXYNOS5_GPIO_PART3_BASE		0x10D10000
@@ -205,6 +208,7 @@ static inline unsigned int samsung_get_base_##device(void)	\
 
 SAMSUNG_BASE(adc, ADC_BASE)
 SAMSUNG_BASE(clock, CLOCK_BASE)
+SAMSUNG_BASE(ace_sfr, ACE_SFR_BASE)
 SAMSUNG_BASE(dp, DP_BASE)
 SAMSUNG_BASE(sysreg, SYSREG_BASE)
 SAMSUNG_BASE(fimd, FIMD_BASE)
diff --git a/arch/arm/include/asm/arch-exynos/dp_info.h b/arch/arm/include/asm/arch-exynos/dp_info.h
index 102b709bd7..ff16361679 100644
--- a/arch/arm/include/asm/arch-exynos/dp_info.h
+++ b/arch/arm/include/asm/arch-exynos/dp_info.h
@@ -199,7 +199,6 @@ enum {
 
 struct exynos_dp_platform_data {
 	struct edp_device_info *edp_dev_info;
-	void (*phy_enable)(unsigned int);
 };
 
 #ifdef CONFIG_EXYNOS_DP
diff --git a/arch/arm/include/asm/arch-exynos/periph.h b/arch/arm/include/asm/arch-exynos/periph.h
index 89bcdfc0cc..e5aed4b959 100644
--- a/arch/arm/include/asm/arch-exynos/periph.h
+++ b/arch/arm/include/asm/arch-exynos/periph.h
@@ -61,6 +61,11 @@ enum periph_id {
 	PERIPH_ID_SPI3,
 	PERIPH_ID_SPI4,
 	PERIPH_ID_SDMMC4,
+	PERIPH_ID_PWM0,
+	PERIPH_ID_PWM1,
+	PERIPH_ID_PWM2,
+	PERIPH_ID_PWM3,
+	PERIPH_ID_PWM4,
 
 	PERIPH_ID_COUNT,
 	PERIPH_ID_NONE = -1,
diff --git a/arch/arm/include/asm/arch-mx5/imx-regs.h b/arch/arm/include/asm/arch-mx5/imx-regs.h
index 249d15a505..a71cc13e2a 100644
--- a/arch/arm/include/asm/arch-mx5/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx5/imx-regs.h
@@ -230,6 +230,7 @@
 #define MXC_CSPICTRL_EN		(1 << 0)
 #define MXC_CSPICTRL_MODE	(1 << 1)
 #define MXC_CSPICTRL_XCH	(1 << 2)
+#define MXC_CSPICTRL_MODE_MASK	(0xf << 4)
 #define MXC_CSPICTRL_CHIPSELECT(x)	(((x) & 0x3) << 12)
 #define MXC_CSPICTRL_BITCOUNT(x)	(((x) & 0xfff) << 20)
 #define MXC_CSPICTRL_PREDIV(x)	(((x) & 0xF) << 12)
diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h
index eaa7439486..d79ab2f13f 100644
--- a/arch/arm/include/asm/arch-mx6/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx6/imx-regs.h
@@ -346,6 +346,7 @@ struct cspi_regs {
 #define MXC_CSPICTRL_EN		(1 << 0)
 #define MXC_CSPICTRL_MODE	(1 << 1)
 #define MXC_CSPICTRL_XCH	(1 << 2)
+#define MXC_CSPICTRL_MODE_MASK (0xf << 4)
 #define MXC_CSPICTRL_CHIPSELECT(x)	(((x) & 0x3) << 12)
 #define MXC_CSPICTRL_BITCOUNT(x)	(((x) & 0xfff) << 20)
 #define MXC_CSPICTRL_PREDIV(x)	(((x) & 0xF) << 12)
diff --git a/arch/arm/include/asm/arch-mx6/mx6dl_pins.h b/arch/arm/include/asm/arch-mx6/mx6dl_pins.h
index 9494e4126a..9846f1bcb5 100644
--- a/arch/arm/include/asm/arch-mx6/mx6dl_pins.h
+++ b/arch/arm/include/asm/arch-mx6/mx6dl_pins.h
@@ -50,6 +50,8 @@
 #define NO_MUX_I                0
 #define NO_PAD_I                0
 enum {
+	MX6_PAD_CSI0_DAT10__UART1_TXD		= IOMUX_PAD(0x0360, 0x004C, 3, 0x0000, 0, 0),
+	MX6_PAD_CSI0_DAT11__UART1_RXD		= IOMUX_PAD(0x0364, 0x0050, 3, 0x08FC, 1, 0),
 	MX6_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK = IOMUX_PAD(0x03B0, 0x009C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
 	MX6_PAD_DI0_PIN15__IPU1_DI0_PIN15	= IOMUX_PAD(0x03B4, 0x00A0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
 	MX6_PAD_DI0_PIN2__IPU1_DI0_PIN2	= IOMUX_PAD(0x03B8, 0x00A4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm),
@@ -90,6 +92,7 @@ enum {
 	MX6_PAD_EIM_D27__UART2_RXD		= IOMUX_PAD(0x0540, 0x0170, 4, 0x0904, 1, 0),
 	MX6_PAD_EIM_D28__I2C1_SDA		= IOMUX_PAD(0x0544, 0x0174, 1 | IOMUX_CONFIG_SION, 0x086C, 1, 0),
 	MX6_PAD_EIM_D28__GPIO_3_28		= IOMUX_PAD(0x0544, 0x0174, 5, 0x0000, 0, 0),
+	MX6_PAD_EIM_D29__GPIO_3_29		= IOMUX_PAD(0x0548, 0x0178, 5, 0x0000, 0, 0),
 	MX6_PAD_ENET_MDC__ENET_MDC		= IOMUX_PAD(0x05B8, 0x01E8, 1, 0x0000, 0,  0),
 	MX6_PAD_ENET_MDIO__ENET_MDIO		= IOMUX_PAD(0x05BC, 0x01EC, 1, 0x0810, 0, 0),
 	MX6_PAD_ENET_REF_CLK__ENET_TX_CLK	= IOMUX_PAD(0x05C0, 0x01F0, 1, 0x0000, 0, 0),
diff --git a/arch/arm/include/asm/arch-omap24xx/omap2420.h b/arch/arm/include/asm/arch-omap24xx/omap2420.h
index d8d5647e80..5724f5d4ba 100644
--- a/arch/arm/include/asm/arch-omap24xx/omap2420.h
+++ b/arch/arm/include/asm/arch-omap24xx/omap2420.h
@@ -212,9 +212,9 @@
 # define H4_CS1_BASE           0x04000000  /* debug board */
 # define H4_CS2_BASE           0x0A000000  /* wifi board */
 #else
-# define H4_CS0_BASE           0x04000000  /* flash (64 Meg aligned) */
-# define H4_CS1_BASE           0x08000000  /* debug board */
-# define H4_CS2_BASE           0x0A000000  /* wifi board */
+# define H4_CS0_BASE           0x08000000  /* flash (64 Meg aligned) */
+# define H4_CS1_BASE           0x04000000  /* debug board */
+# define H4_CS2_BASE           0x0C000000  /* wifi board */
 #endif
 
 /* base address for indirect vectors (internal boot mode) */
diff --git a/arch/arm/include/asm/arch-omap3/cpu.h b/arch/arm/include/asm/arch-omap3/cpu.h
index 5683e16177..c6018739ff 100644
--- a/arch/arm/include/asm/arch-omap3/cpu.h
+++ b/arch/arm/include/asm/arch-omap3/cpu.h
@@ -109,6 +109,10 @@ struct gpmc_cs {
 	u8 res[8];		/* blow up to 0x30 byte */
 };
 
+struct bch_res_0_3 {
+	u32 bch_result_x[4];
+};
+
 struct gpmc {
 	u8 res1[0x10];
 	u32 sysconfig;		/* 0x10 */
@@ -135,6 +139,8 @@ struct gpmc {
 	u32 ecc7_result;	/* 0x218 */
 	u32 ecc8_result;	/* 0x21C */
 	u32 ecc9_result;	/* 0x220 */
+	u8 res7[0x1C];		/* fill up to 0x240 */
+	struct bch_res_0_3 bch_result_0_3[7];	/* 0x240 */
 };
 
 /* Used for board specific gpmc initialization */
diff --git a/arch/arm/include/asm/arch-omap3/omap_gpmc.h b/arch/arm/include/asm/arch-omap3/omap_gpmc.h
index 800e4ee4a2..6441281cee 100644
--- a/arch/arm/include/asm/arch-omap3/omap_gpmc.h
+++ b/arch/arm/include/asm/arch-omap3/omap_gpmc.h
@@ -23,62 +23,22 @@
 #ifndef __ASM_ARCH_OMAP_GPMC_H
 #define __ASM_ARCH_OMAP_GPMC_H
 
-#define GPMC_BUF_EMPTY	0
-#define GPMC_BUF_FULL	1
-
-#define ECCCLEAR	(0x1 << 8)
-#define ECCRESULTREG1	(0x1 << 0)
-#define ECCSIZE512BYTE	0xFF
-#define ECCSIZE1	(ECCSIZE512BYTE << 22)
-#define ECCSIZE0	(ECCSIZE512BYTE << 12)
-#define ECCSIZE0SEL	(0x000 << 0)
-
-/* Generic ECC Layouts */
-/* Large Page x8 NAND device Layout */
-#ifdef GPMC_NAND_ECC_LP_x8_LAYOUT
-#define GPMC_NAND_HW_ECC_LAYOUT {\
-	.eccbytes = 12,\
-	.eccpos = {1, 2, 3, 4, 5, 6, 7, 8,\
-		9, 10, 11, 12},\
-	.oobfree = {\
-		{.offset = 13,\
-		 .length = 51 } } \
-}
-#endif
-
-/* Large Page x16 NAND device Layout */
-#ifdef GPMC_NAND_ECC_LP_x16_LAYOUT
-#define GPMC_NAND_HW_ECC_LAYOUT {\
-	.eccbytes = 12,\
-	.eccpos = {2, 3, 4, 5, 6, 7, 8, 9,\
-		10, 11, 12, 13},\
-	.oobfree = {\
-		{.offset = 14,\
-		 .length = 50 } } \
-}
-#endif
-
-/* Small Page x8 NAND device Layout */
-#ifdef GPMC_NAND_ECC_SP_x8_LAYOUT
-#define GPMC_NAND_HW_ECC_LAYOUT {\
-	.eccbytes = 3,\
-	.eccpos = {1, 2, 3},\
-	.oobfree = {\
-		{.offset = 4,\
-		 .length = 12 } } \
-}
-#endif
-
-/* Small Page x16 NAND device Layout */
-#ifdef GPMC_NAND_ECC_SP_x16_LAYOUT
-#define GPMC_NAND_HW_ECC_LAYOUT {\
-	.eccbytes = 3,\
-	.eccpos = {2, 3, 4},\
+/*
+ * These GPMC_NAND_HW_BCHx_ECC_LAYOUT defines using the BCH library.
+ * The OOB layout was first defined by linx kernel in commit
+ * 0e618ef0a6a33cf7ef96c2c824402088dd8ef48c, we have to reuse it here cause
+ * we want to be compatible.
+ */
+#define GPMC_NAND_HW_BCH8_ECC_LAYOUT {\
+	.eccbytes = 56,\
+	.eccpos = {12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22,\
+			23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36,\
+			37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50,\
+			51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63},\
 	.oobfree = {\
-		{.offset = 5,\
-		 .length = 11 } } \
+		{.offset = 2,\
+		 .length = 10 } } \
 }
-#endif
 
 /* GPMC CS configuration for an SMSC LAN9221 ethernet controller */
 #define NET_LAN9221_GPMC_CONFIG1    0x00001000
diff --git a/arch/arm/include/asm/arch-omap3/spl.h b/arch/arm/include/asm/arch-omap3/spl.h
index dec4dacbad..84e6d7bcbc 100644
--- a/arch/arm/include/asm/arch-omap3/spl.h
+++ b/arch/arm/include/asm/arch-omap3/spl.h
@@ -31,4 +31,7 @@
 #define BOOT_DEVICE_MMC1	6
 #define BOOT_DEVICE_XIPWAIT	7
 #define BOOT_DEVICE_MMC2_2      0xFF
+
+#define MMC_BOOT_DEVICES_START	BOOT_DEVICE_MMC2
+#define MMC_BOOT_DEVICES_END	BOOT_DEVICE_MMC1
 #endif
diff --git a/arch/arm/include/asm/arch-omap3/sys_proto.h b/arch/arm/include/asm/arch-omap3/sys_proto.h
index d60f2addb2..dae1312469 100644
--- a/arch/arm/include/asm/arch-omap3/sys_proto.h
+++ b/arch/arm/include/asm/arch-omap3/sys_proto.h
@@ -78,7 +78,7 @@ void sr32(void *, u32, u32, u32);
 u32 wait_on_value(u32, u32, void *, u32);
 void sdelay(unsigned long);
 void make_cs1_contiguous(void);
-void omap_nand_switch_ecc(int);
+void omap_nand_switch_ecc(uint32_t, uint32_t);
 void power_init_r(void);
 void dieid_num_r(void);
 void do_omap3_emu_romcode_call(u32 service_id, u32 parameters);
diff --git a/arch/arm/include/asm/arch-omap4/omap.h b/arch/arm/include/asm/arch-omap4/omap.h
index 5f321fe6f0..ad984da0b4 100644
--- a/arch/arm/include/asm/arch-omap4/omap.h
+++ b/arch/arm/include/asm/arch-omap4/omap.h
@@ -147,7 +147,6 @@ struct s32ktimer {
 #define SRAM_SCRATCH_SPACE_ADDR		NON_SECURE_SRAM_START
 /* SRAM scratch space entries */
 #define OMAP4_SRAM_SCRATCH_OMAP4_REV	SRAM_SCRATCH_SPACE_ADDR
-#define OMAP4_SRAM_SCRATCH_EMIF_SIZE	(SRAM_SCRATCH_SPACE_ADDR + 0x4)
 #define OMAP4_SRAM_SCRATCH_EMIF_T_NUM	(SRAM_SCRATCH_SPACE_ADDR + 0xC)
 #define OMAP4_SRAM_SCRATCH_EMIF_T_DEN	(SRAM_SCRATCH_SPACE_ADDR + 0x10)
 #define OMAP_SRAM_SCRATCH_PRCM_PTR      (SRAM_SCRATCH_SPACE_ADDR + 0x14)
diff --git a/arch/arm/include/asm/arch-omap4/spl.h b/arch/arm/include/asm/arch-omap4/spl.h
index 4e094f9c60..f61627ff56 100644
--- a/arch/arm/include/asm/arch-omap4/spl.h
+++ b/arch/arm/include/asm/arch-omap4/spl.h
@@ -32,4 +32,6 @@
 #define BOOT_DEVICE_MMC2	6
 #define BOOT_DEVICE_MMC2_2	0xFF
 
+#define MMC_BOOT_DEVICES_START	BOOT_DEVICE_MMC1
+#define MMC_BOOT_DEVICES_END	BOOT_DEVICE_MMC2
 #endif
diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h
index b632635d3e..887fcaa5ff 100644
--- a/arch/arm/include/asm/arch-omap5/omap.h
+++ b/arch/arm/include/asm/arch-omap5/omap.h
@@ -196,7 +196,6 @@ struct s32ktimer {
  * SRAM scratch space entries
  */
 #define OMAP5_SRAM_SCRATCH_OMAP5_REV	SRAM_SCRATCH_SPACE_ADDR
-#define OMAP5_SRAM_SCRATCH_EMIF_SIZE	(SRAM_SCRATCH_SPACE_ADDR + 0x4)
 #define OMAP5_SRAM_SCRATCH_EMIF_T_NUM	(SRAM_SCRATCH_SPACE_ADDR + 0xC)
 #define OMAP5_SRAM_SCRATCH_EMIF_T_DEN	(SRAM_SCRATCH_SPACE_ADDR + 0x10)
 #define OMAP_SRAM_SCRATCH_PRCM_PTR      (SRAM_SCRATCH_SPACE_ADDR + 0x14)
diff --git a/arch/arm/include/asm/arch-omap5/spl.h b/arch/arm/include/asm/arch-omap5/spl.h
index 323cd63551..d4d353c80b 100644
--- a/arch/arm/include/asm/arch-omap5/spl.h
+++ b/arch/arm/include/asm/arch-omap5/spl.h
@@ -32,4 +32,6 @@
 #define BOOT_DEVICE_MMC2        6
 #define BOOT_DEVICE_MMC2_2	7
 
+#define MMC_BOOT_DEVICES_START	BOOT_DEVICE_MMC1
+#define MMC_BOOT_DEVICES_END	BOOT_DEVICE_MMC2_2
 #endif
diff --git a/arch/arm/include/asm/arch-s3c64xx/hardware.h b/arch/arm/include/asm/arch-s3c64xx/hardware.h
deleted file mode 100644
index 84d24c9384..0000000000
--- a/arch/arm/include/asm/arch-s3c64xx/hardware.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * Originates from Samsung's u-boot 1.1.6 port to S3C6400 / SMDK6400
- *
- * (C) Copyright 2008
- * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _ARCH_HARDWARE_H_
-#define _ARCH_HARDWARE_H_
-
-#include <asm/sizes.h>
-
-#ifndef __ASSEMBLY__
-#define UData(Data)	((unsigned long) (Data))
-
-#define __REG(x)	(*(vu_long *)(x))
-#define __REGl(x)	(*(vu_long *)(x))
-#define __REGw(x)	(*(vu_short *)(x))
-#define __REGb(x)	(*(vu_char *)(x))
-#define __REG2(x, y)	(*(vu_long *)((x) + (y)))
-#else
-#define UData(Data)	(Data)
-
-#define __REG(x)	(x)
-#define __REGl(x)	(x)
-#define __REGw(x)	(x)
-#define __REGb(x)	(x)
-#define __REG2(x, y)	((x) + (y))
-#endif
-
-#define Fld(Size, Shft)	(((Size) << 16) + (Shft))
-
-#define FSize(Field)	((Field) >> 16)
-#define FShft(Field)	((Field) & 0x0000FFFF)
-#define FMsk(Field)	(((UData (1) << FSize (Field)) - 1) << FShft (Field))
-#define FAlnMsk(Field)	((UData (1) << FSize (Field)) - 1)
-#define F1stBit(Field)	(UData (1) << FShft (Field))
-
-#define FClrBit(Data, Bit)	(Data = (Data & ~(Bit)))
-#define FClrFld(Data, Field)	(Data = (Data & ~FMsk(Field)))
-
-#define FInsrt(Value, Field) \
-			(UData (Value) << FShft (Field))
-
-#define FExtr(Data, Field) \
-			((UData (Data) >> FShft (Field)) & FAlnMsk (Field))
-
-#endif /* _ARCH_HARDWARE_H_ */
diff --git a/arch/arm/include/asm/arch-s3c64xx/s3c6400.h b/arch/arm/include/asm/arch-s3c64xx/s3c6400.h
deleted file mode 100644
index 10b33241e1..0000000000
--- a/arch/arm/include/asm/arch-s3c64xx/s3c6400.h
+++ /dev/null
@@ -1,895 +0,0 @@
-/*
- * (C) Copyright 2007
- * Byungjae Lee, Samsung Erectronics, bjlee@samsung.com.
- *      - only support for S3C6400
- *
- * (C) Copyright 2008
- * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/************************************************
- * NAME	    : s3c6400.h
- *
- * Based on S3C6400 User's manual Rev 0.0
- ************************************************/
-
-#ifndef __S3C6400_H__
-#define __S3C6400_H__
-
-#define S3C64XX_UART_CHANNELS	3
-#define S3C64XX_SPI_CHANNELS	2
-
-#include <asm/hardware.h>
-
-#define ELFIN_CLOCK_POWER_BASE	0x7e00f000
-
-/* Clock & Power Controller for mDirac3*/
-#define APLL_LOCK_OFFSET	0x00
-#define MPLL_LOCK_OFFSET	0x04
-#define EPLL_LOCK_OFFSET	0x08
-#define APLL_CON_OFFSET		0x0C
-#define MPLL_CON_OFFSET		0x10
-#define EPLL_CON0_OFFSET	0x14
-#define EPLL_CON1_OFFSET	0x18
-#define CLK_SRC_OFFSET		0x1C
-#define CLK_DIV0_OFFSET		0x20
-#define CLK_DIV1_OFFSET		0x24
-#define CLK_DIV2_OFFSET		0x28
-#define CLK_OUT_OFFSET		0x2C
-#define HCLK_GATE_OFFSET	0x30
-#define PCLK_GATE_OFFSET	0x34
-#define SCLK_GATE_OFFSET	0x38
-#define AHB_CON0_OFFSET		0x100
-#define AHB_CON1_OFFSET		0x104
-#define AHB_CON2_OFFSET		0x108
-#define SELECT_DMA_OFFSET	0x110
-#define SW_RST_OFFSET		0x114
-#define SYS_ID_OFFSET		0x118
-#define MEM_SYS_CFG_OFFSET	0x120
-#define QOS_OVERRIDE0_OFFSET	0x124
-#define QOS_OVERRIDE1_OFFSET	0x128
-#define MEM_CFG_STAT_OFFSET	0x12C
-#define PWR_CFG_OFFSET		0x804
-#define EINT_MASK_OFFSET	0x808
-#define NOR_CFG_OFFSET		0x810
-#define STOP_CFG_OFFSET		0x814
-#define SLEEP_CFG_OFFSET	0x818
-#define OSC_FREQ_OFFSET		0x820
-#define OSC_STABLE_OFFSET	0x824
-#define PWR_STABLE_OFFSET	0x828
-#define FPC_STABLE_OFFSET	0x82C
-#define MTC_STABLE_OFFSET	0x830
-#define OTHERS_OFFSET		0x900
-#define RST_STAT_OFFSET		0x904
-#define WAKEUP_STAT_OFFSET	0x908
-#define BLK_PWR_STAT_OFFSET	0x90C
-#define INF_REG0_OFFSET		0xA00
-#define INF_REG1_OFFSET		0xA04
-#define INF_REG2_OFFSET		0xA08
-#define INF_REG3_OFFSET		0xA0C
-#define INF_REG4_OFFSET		0xA10
-#define INF_REG5_OFFSET		0xA14
-#define INF_REG6_OFFSET		0xA18
-#define INF_REG7_OFFSET		0xA1C
-
-#define OSC_CNT_VAL_OFFSET	0x824
-#define PWR_CNT_VAL_OFFSET	0x828
-#define FPC_CNT_VAL_OFFSET	0x82C
-#define MTC_CNT_VAL_OFFSET	0x830
-
-#define APLL_LOCK_REG		__REG(ELFIN_CLOCK_POWER_BASE + APLL_LOCK_OFFSET)
-#define MPLL_LOCK_REG		__REG(ELFIN_CLOCK_POWER_BASE + MPLL_LOCK_OFFSET)
-#define EPLL_LOCK_REG		__REG(ELFIN_CLOCK_POWER_BASE + EPLL_LOCK_OFFSET)
-#define APLL_CON_REG		__REG(ELFIN_CLOCK_POWER_BASE + APLL_CON_OFFSET)
-#define MPLL_CON_REG		__REG(ELFIN_CLOCK_POWER_BASE + MPLL_CON_OFFSET)
-#define EPLL_CON0_REG		__REG(ELFIN_CLOCK_POWER_BASE + EPLL_CON0_OFFSET)
-#define EPLL_CON1_REG		__REG(ELFIN_CLOCK_POWER_BASE + EPLL_CON1_OFFSET)
-#define CLK_SRC_REG		__REG(ELFIN_CLOCK_POWER_BASE + CLK_SRC_OFFSET)
-#define CLK_DIV0_REG		__REG(ELFIN_CLOCK_POWER_BASE + CLK_DIV0_OFFSET)
-#define CLK_DIV1_REG		__REG(ELFIN_CLOCK_POWER_BASE + CLK_DIV1_OFFSET)
-#define CLK_DIV2_REG		__REG(ELFIN_CLOCK_POWER_BASE + CLK_DIV2_OFFSET)
-#define CLK_OUT_REG		__REG(ELFIN_CLOCK_POWER_BASE + CLK_OUT_OFFSET)
-#define HCLK_GATE_REG		__REG(ELFIN_CLOCK_POWER_BASE + HCLK_GATE_OFFSET)
-#define PCLK_GATE_REG		__REG(ELFIN_CLOCK_POWER_BASE + PCLK_GATE_OFFSET)
-#define SCLK_GATE_REG		__REG(ELFIN_CLOCK_POWER_BASE + SCLK_GATE_OFFSET)
-#define AHB_CON0_REG		__REG(ELFIN_CLOCK_POWER_BASE + AHB_CON0_OFFSET)
-#define AHB_CON1_REG		__REG(ELFIN_CLOCK_POWER_BASE + AHB_CON1_OFFSET)
-#define AHB_CON2_REG		__REG(ELFIN_CLOCK_POWER_BASE + AHB_CON2_OFFSET)
-#define SELECT_DMA_REG		__REG(ELFIN_CLOCK_POWER_BASE + \
-				      SELECT_DMA_OFFSET)
-#define SW_RST_REG		__REG(ELFIN_CLOCK_POWER_BASE + SW_RST_OFFSET)
-#define SYS_ID_REG		__REG(ELFIN_CLOCK_POWER_BASE + SYS_ID_OFFSET)
-#define MEM_SYS_CFG_REG		__REG(ELFIN_CLOCK_POWER_BASE + \
-				      MEM_SYS_CFG_OFFSET)
-#define QOS_OVERRIDE0_REG	__REG(ELFIN_CLOCK_POWER_BASE + \
-				      QOS_OVERRIDE0_OFFSET)
-#define QOS_OVERRIDE1_REG	__REG(ELFIN_CLOCK_POWER_BASE + \
-				      QOS_OVERRIDE1_OFFSET)
-#define MEM_CFG_STAT_REG	__REG(ELFIN_CLOCK_POWER_BASE + \
-				      MEM_CFG_STAT_OFFSET)
-#define PWR_CFG_REG		__REG(ELFIN_CLOCK_POWER_BASE + PWR_CFG_OFFSET)
-#define EINT_MASK_REG		__REG(ELFIN_CLOCK_POWER_BASE + EINT_MASK_OFFSET)
-#define NOR_CFG_REG		__REG(ELFIN_CLOCK_POWER_BASE + NOR_CFG_OFFSET)
-#define STOP_CFG_REG		__REG(ELFIN_CLOCK_POWER_BASE + STOP_CFG_OFFSET)
-#define SLEEP_CFG_REG		__REG(ELFIN_CLOCK_POWER_BASE + SLEEP_CFG_OFFSET)
-#define OSC_FREQ_REG		__REG(ELFIN_CLOCK_POWER_BASE + OSC_FREQ_OFFSET)
-#define OSC_CNT_VAL_REG		__REG(ELFIN_CLOCK_POWER_BASE + \
-				      OSC_CNT_VAL_OFFSET)
-#define PWR_CNT_VAL_REG		__REG(ELFIN_CLOCK_POWER_BASE + \
-				      PWR_CNT_VAL_OFFSET)
-#define FPC_CNT_VAL_REG		__REG(ELFIN_CLOCK_POWER_BASE + \
-				      FPC_CNT_VAL_OFFSET)
-#define MTC_CNT_VAL_REG		__REG(ELFIN_CLOCK_POWER_BASE + \
-				      MTC_CNT_VAL_OFFSET)
-#define OTHERS_REG		__REG(ELFIN_CLOCK_POWER_BASE + OTHERS_OFFSET)
-#define RST_STAT_REG		__REG(ELFIN_CLOCK_POWER_BASE + RST_STAT_OFFSET)
-#define WAKEUP_STAT_REG		__REG(ELFIN_CLOCK_POWER_BASE + \
-				      WAKEUP_STAT_OFFSET)
-#define BLK_PWR_STAT_REG	__REG(ELFIN_CLOCK_POWER_BASE + \
-				      BLK_PWR_STAT_OFFSET)
-#define INF_REG0_REG		__REG(ELFIN_CLOCK_POWER_BASE + INF_REG0_OFFSET)
-#define INF_REG1_REG		__REG(ELFIN_CLOCK_POWER_BASE + INF_REG1_OFFSET)
-#define INF_REG2_REG		__REG(ELFIN_CLOCK_POWER_BASE + INF_REG2_OFFSET)
-#define INF_REG3_REG		__REG(ELFIN_CLOCK_POWER_BASE + INF_REG3_OFFSET)
-#define INF_REG4_REG		__REG(ELFIN_CLOCK_POWER_BASE + INF_REG4_OFFSET)
-#define INF_REG5_REG		__REG(ELFIN_CLOCK_POWER_BASE + INF_REG5_OFFSET)
-#define INF_REG6_REG		__REG(ELFIN_CLOCK_POWER_BASE + INF_REG6_OFFSET)
-#define INF_REG7_REG		__REG(ELFIN_CLOCK_POWER_BASE + INF_REG7_OFFSET)
-
-#define APLL_LOCK	(ELFIN_CLOCK_POWER_BASE + APLL_LOCK_OFFSET)
-#define MPLL_LOCK	(ELFIN_CLOCK_POWER_BASE + MPLL_LOCK_OFFSET)
-#define EPLL_LOCK	(ELFIN_CLOCK_POWER_BASE + EPLL_LOCK_OFFSET)
-#define APLL_CON	(ELFIN_CLOCK_POWER_BASE + APLL_CON_OFFSET)
-#define MPLL_CON	(ELFIN_CLOCK_POWER_BASE + MPLL_CON_OFFSET)
-#define EPLL_CON0	(ELFIN_CLOCK_POWER_BASE + EPLL_CON0_OFFSET)
-#define EPLL_CON1	(ELFIN_CLOCK_POWER_BASE + EPLL_CON1_OFFSET)
-#define CLK_SRC		(ELFIN_CLOCK_POWER_BASE + CLK_SRC_OFFSET)
-#define CLK_DIV0	(ELFIN_CLOCK_POWER_BASE + CLK_DIV0_OFFSET)
-#define CLK_DIV1	(ELFIN_CLOCK_POWER_BASE + CLK_DIV1_OFFSET)
-#define CLK_DIV2	(ELFIN_CLOCK_POWER_BASE + CLK_DIV2_OFFSET)
-#define CLK_OUT		(ELFIN_CLOCK_POWER_BASE + CLK_OUT_OFFSET)
-#define HCLK_GATE	(ELFIN_CLOCK_POWER_BASE + HCLK_GATE_OFFSET)
-#define PCLK_GATE	(ELFIN_CLOCK_POWER_BASE + PCLK_GATE_OFFSET)
-#define SCLK_GATE	(ELFIN_CLOCK_POWER_BASE + SCLK_GATE_OFFSET)
-#define AHB_CON0	(ELFIN_CLOCK_POWER_BASE + AHB_CON0_OFFSET)
-#define AHB_CON1	(ELFIN_CLOCK_POWER_BASE + AHB_CON1_OFFSET)
-#define AHB_CON2	(ELFIN_CLOCK_POWER_BASE + AHB_CON2_OFFSET)
-#define SELECT_DMA	(ELFIN_CLOCK_POWER_BASE + SELECT_DMA_OFFSET)
-#define SW_RST		(ELFIN_CLOCK_POWER_BASE + SW_RST_OFFSET)
-#define SYS_ID		(ELFIN_CLOCK_POWER_BASE + SYS_ID_OFFSET)
-#define MEM_SYS_CFG	(ELFIN_CLOCK_POWER_BASE + MEM_SYS_CFG_OFFSET)
-#define QOS_OVERRIDE0	(ELFIN_CLOCK_POWER_BASE + QOS_OVERRIDE0_OFFSET)
-#define QOS_OVERRIDE1	(ELFIN_CLOCK_POWER_BASE + QOS_OVERRIDE1_OFFSET)
-#define MEM_CFG_STAT	(ELFIN_CLOCK_POWER_BASE + MEM_CFG_STAT_OFFSET)
-#define PWR_CFG		(ELFIN_CLOCK_POWER_BASE + PWR_CFG_OFFSET)
-#define EINT_MASK	(ELFIN_CLOCK_POWER_BASE + EINT_MASK_OFFSET)
-#define NOR_CFG		(ELFIN_CLOCK_POWER_BASE + NOR_CFG_OFFSET)
-#define STOP_CFG	(ELFIN_CLOCK_POWER_BASE + STOP_CFG_OFFSET)
-#define SLEEP_CFG	(ELFIN_CLOCK_POWER_BASE + SLEEP_CFG_OFFSET)
-#define OSC_FREQ	(ELFIN_CLOCK_POWER_BASE + OSC_FREQ_OFFSET)
-#define OSC_CNT_VAL	(ELFIN_CLOCK_POWER_BASE + OSC_CNT_VAL_OFFSET)
-#define PWR_CNT_VAL	(ELFIN_CLOCK_POWER_BASE + PWR_CNT_VAL_OFFSET)
-#define FPC_CNT_VAL	(ELFIN_CLOCK_POWER_BASE + FPC_CNT_VAL_OFFSET)
-#define MTC_CNT_VAL	(ELFIN_CLOCK_POWER_BASE + MTC_CNT_VAL_OFFSET)
-#define OTHERS		(ELFIN_CLOCK_POWER_BASE + OTHERS_OFFSET)
-#define RST_STAT	(ELFIN_CLOCK_POWER_BASE + RST_STAT_OFFSET)
-#define WAKEUP_STAT	(ELFIN_CLOCK_POWER_BASE + WAKEUP_STAT_OFFSET)
-#define BLK_PWR_STAT	(ELFIN_CLOCK_POWER_BASE + BLK_PWR_STAT_OFFSET)
-#define INF_REG0	(ELFIN_CLOCK_POWER_BASE + INF_REG0_OFFSET)
-#define INF_REG1	(ELFIN_CLOCK_POWER_BASE + INF_REG1_OFFSET)
-#define INF_REG2	(ELFIN_CLOCK_POWER_BASE + INF_REG2_OFFSET)
-#define INF_REG3	(ELFIN_CLOCK_POWER_BASE + INF_REG3_OFFSET)
-#define INF_REG4	(ELFIN_CLOCK_POWER_BASE + INF_REG4_OFFSET)
-#define INF_REG5	(ELFIN_CLOCK_POWER_BASE + INF_REG5_OFFSET)
-#define INF_REG6	(ELFIN_CLOCK_POWER_BASE + INF_REG6_OFFSET)
-#define INF_REG7	(ELFIN_CLOCK_POWER_BASE + INF_REG7_OFFSET)
-
-
-/*
- * GPIO
- */
-#define ELFIN_GPIO_BASE		0x7f008000
-
-#define GPACON_OFFSET		0x00
-#define GPADAT_OFFSET		0x04
-#define GPAPUD_OFFSET		0x08
-#define GPACONSLP_OFFSET	0x0C
-#define GPAPUDSLP_OFFSET	0x10
-#define GPBCON_OFFSET		0x20
-#define GPBDAT_OFFSET		0x24
-#define GPBPUD_OFFSET		0x28
-#define GPBCONSLP_OFFSET	0x2C
-#define GPBPUDSLP_OFFSET	0x30
-#define GPCCON_OFFSET		0x40
-#define GPCDAT_OFFSET		0x44
-#define GPCPUD_OFFSET		0x48
-#define GPCCONSLP_OFFSET	0x4C
-#define GPCPUDSLP_OFFSET	0x50
-#define GPDCON_OFFSET		0x60
-#define GPDDAT_OFFSET		0x64
-#define GPDPUD_OFFSET		0x68
-#define GPDCONSLP_OFFSET	0x6C
-#define GPDPUDSLP_OFFSET	0x70
-#define GPECON_OFFSET		0x80
-#define GPEDAT_OFFSET		0x84
-#define GPEPUD_OFFSET		0x88
-#define GPECONSLP_OFFSET	0x8C
-#define GPEPUDSLP_OFFSET	0x90
-#define GPFCON_OFFSET		0xA0
-#define GPFDAT_OFFSET		0xA4
-#define GPFPUD_OFFSET		0xA8
-#define GPFCONSLP_OFFSET	0xAC
-#define GPFPUDSLP_OFFSET	0xB0
-#define GPGCON_OFFSET		0xC0
-#define GPGDAT_OFFSET		0xC4
-#define GPGPUD_OFFSET		0xC8
-#define GPGCONSLP_OFFSET	0xCC
-#define GPGPUDSLP_OFFSET	0xD0
-#define GPHCON0_OFFSET		0xE0
-#define GPHCON1_OFFSET		0xE4
-#define GPHDAT_OFFSET		0xE8
-#define GPHPUD_OFFSET		0xEC
-#define GPHCONSLP_OFFSET	0xF0
-#define GPHPUDSLP_OFFSET	0xF4
-#define GPICON_OFFSET		0x100
-#define GPIDAT_OFFSET		0x104
-#define GPIPUD_OFFSET		0x108
-#define GPICONSLP_OFFSET	0x10C
-#define GPIPUDSLP_OFFSET	0x110
-#define GPJCON_OFFSET		0x120
-#define GPJDAT_OFFSET		0x124
-#define GPJPUD_OFFSET		0x128
-#define GPJCONSLP_OFFSET	0x12C
-#define GPJPUDSLP_OFFSET	0x130
-#define MEM0DRVCON_OFFSET	0x1D0
-#define MEM1DRVCON_OFFSET	0x1D4
-#define GPKCON0_OFFSET		0x800
-#define GPKCON1_OFFSET		0x804
-#define GPKDAT_OFFSET		0x808
-#define GPKPUD_OFFSET		0x80C
-#define GPLCON0_OFFSET		0x810
-#define GPLCON1_OFFSET		0x814
-#define GPLDAT_OFFSET		0x818
-#define GPLPUD_OFFSET		0x81C
-#define GPMCON_OFFSET		0x820
-#define GPMDAT_OFFSET		0x824
-#define GPMPUD_OFFSET		0x828
-#define GPNCON_OFFSET		0x830
-#define GPNDAT_OFFSET		0x834
-#define GPNPUD_OFFSET		0x838
-#define GPOCON_OFFSET		0x140
-#define GPODAT_OFFSET		0x144
-#define GPOPUD_OFFSET		0x148
-#define GPOCONSLP_OFFSET	0x14C
-#define GPOPUDSLP_OFFSET	0x150
-#define GPPCON_OFFSET		0x160
-#define GPPDAT_OFFSET		0x164
-#define GPPPUD_OFFSET		0x168
-#define GPPCONSLP_OFFSET	0x16C
-#define GPPPUDSLP_OFFSET	0x170
-#define GPQCON_OFFSET		0x180
-#define GPQDAT_OFFSET		0x184
-#define GPQPUD_OFFSET		0x188
-#define GPQCONSLP_OFFSET	0x18C
-#define GPQPUDSLP_OFFSET	0x190
-
-#define EINTPEND_OFFSET		0x924
-
-#define GPACON_REG		__REG(ELFIN_GPIO_BASE + GPACON_OFFSET)
-#define GPADAT_REG		__REG(ELFIN_GPIO_BASE + GPADAT_OFFSET)
-#define GPAPUD_REG		__REG(ELFIN_GPIO_BASE + GPAPUD_OFFSET)
-#define GPACONSLP_REG		__REG(ELFIN_GPIO_BASE + GPACONSLP_OFFSET)
-#define GPAPUDSLP_REG		__REG(ELFIN_GPIO_BASE + GPAPUDSLP_OFFSET)
-#define GPBCON_REG		__REG(ELFIN_GPIO_BASE + GPBCON_OFFSET)
-#define GPBDAT_REG		__REG(ELFIN_GPIO_BASE + GPBDAT_OFFSET)
-#define GPBPUD_REG		__REG(ELFIN_GPIO_BASE + GPBPUD_OFFSET)
-#define GPBCONSLP_REG		__REG(ELFIN_GPIO_BASE + GPBCONSLP_OFFSET)
-#define GPBPUDSLP_REG		__REG(ELFIN_GPIO_BASE + GPBPUDSLP_OFFSET)
-#define GPCCON_REG		__REG(ELFIN_GPIO_BASE + GPCCON_OFFSET)
-#define GPCDAT_REG		__REG(ELFIN_GPIO_BASE + GPCDAT_OFFSET)
-#define GPCPUD_REG		__REG(ELFIN_GPIO_BASE + GPCPUD_OFFSET)
-#define GPCCONSLP_REG		__REG(ELFIN_GPIO_BASE + GPCCONSLP_OFFSET)
-#define GPCPUDSLP_REG		__REG(ELFIN_GPIO_BASE + GPCPUDSLP_OFFSET)
-#define GPDCON_REG		__REG(ELFIN_GPIO_BASE + GPDCON_OFFSET)
-#define GPDDAT_REG		__REG(ELFIN_GPIO_BASE + GPDDAT_OFFSET)
-#define GPDPUD_REG		__REG(ELFIN_GPIO_BASE + GPDPUD_OFFSET)
-#define GPDCONSLP_REG		__REG(ELFIN_GPIO_BASE + GPDCONSLP_OFFSET)
-#define GPDPUDSLP_REG		__REG(ELFIN_GPIO_BASE + GPDPUDSLP_OFFSET)
-#define GPECON_REG		__REG(ELFIN_GPIO_BASE + GPECON_OFFSET)
-#define GPEDAT_REG		__REG(ELFIN_GPIO_BASE + GPEDAT_OFFSET)
-#define GPEPUD_REG		__REG(ELFIN_GPIO_BASE + GPEPUD_OFFSET)
-#define GPECONSLP_REG		__REG(ELFIN_GPIO_BASE + GPECONSLP_OFFSET)
-#define GPEPUDSLP_REG		__REG(ELFIN_GPIO_BASE + GPEPUDSLP_OFFSET)
-#define GPFCON_REG		__REG(ELFIN_GPIO_BASE + GPFCON_OFFSET)
-#define GPFDAT_REG		__REG(ELFIN_GPIO_BASE + GPFDAT_OFFSET)
-#define GPFPUD_REG		__REG(ELFIN_GPIO_BASE + GPFPUD_OFFSET)
-#define GPFCONSLP_REG		__REG(ELFIN_GPIO_BASE + GPFCONSLP_OFFSET)
-#define GPFPUDSLP_REG		__REG(ELFIN_GPIO_BASE + GPFPUDSLP_OFFSET)
-#define GPGCON_REG		__REG(ELFIN_GPIO_BASE + GPGCON_OFFSET)
-#define GPGDAT_REG		__REG(ELFIN_GPIO_BASE + GPGDAT_OFFSET)
-#define GPGPUD_REG		__REG(ELFIN_GPIO_BASE + GPGPUD_OFFSET)
-#define GPGCONSLP_REG		__REG(ELFIN_GPIO_BASE + GPGCONSLP_OFFSET)
-#define GPGPUDSLP_REG		__REG(ELFIN_GPIO_BASE + GPGPUDSLP_OFFSET)
-#define GPHCON0_REG		__REG(ELFIN_GPIO_BASE + GPHCON0_OFFSET)
-#define GPHCON1_REG		__REG(ELFIN_GPIO_BASE + GPHCON1_OFFSET)
-#define GPHDAT_REG		__REG(ELFIN_GPIO_BASE + GPHDAT_OFFSET)
-#define GPHPUD_REG		__REG(ELFIN_GPIO_BASE + GPHPUD_OFFSET)
-#define GPHCONSLP_REG		__REG(ELFIN_GPIO_BASE + GPHCONSLP_OFFSET)
-#define GPHPUDSLP_REG		__REG(ELFIN_GPIO_BASE + GPHPUDSLP_OFFSET)
-#define GPICON_REG		__REG(ELFIN_GPIO_BASE + GPICON_OFFSET)
-#define GPIDAT_REG		__REG(ELFIN_GPIO_BASE + GPIDAT_OFFSET)
-#define GPIPUD_REG		__REG(ELFIN_GPIO_BASE + GPIPUD_OFFSET)
-#define GPICONSLP_REG		__REG(ELFIN_GPIO_BASE + GPICONSLP_OFFSET)
-#define GPIPUDSLP_REG		__REG(ELFIN_GPIO_BASE + GPIPUDSLP_OFFSET)
-#define GPJCON_REG		__REG(ELFIN_GPIO_BASE + GPJCON_OFFSET)
-#define GPJDAT_REG		__REG(ELFIN_GPIO_BASE + GPJDAT_OFFSET)
-#define GPJPUD_REG		__REG(ELFIN_GPIO_BASE + GPJPUD_OFFSET)
-#define GPJCONSLP_REG		__REG(ELFIN_GPIO_BASE + GPJCONSLP_OFFSET)
-#define GPJPUDSLP_REG		__REG(ELFIN_GPIO_BASE + GPJPUDSLP_OFFSET)
-#define GPKCON0_REG		__REG(ELFIN_GPIO_BASE + GPKCON0_OFFSET)
-#define GPKCON1_REG		__REG(ELFIN_GPIO_BASE + GPKCON1_OFFSET)
-#define GPKDAT_REG		__REG(ELFIN_GPIO_BASE + GPKDAT_OFFSET)
-#define GPKPUD_REG		__REG(ELFIN_GPIO_BASE + GPKPUD_OFFSET)
-#define GPLCON0_REG		__REG(ELFIN_GPIO_BASE + GPLCON0_OFFSET)
-#define GPLCON1_REG		__REG(ELFIN_GPIO_BASE + GPLCON1_OFFSET)
-#define GPLDAT_REG		__REG(ELFIN_GPIO_BASE + GPLDAT_OFFSET)
-#define GPLPUD_REG		__REG(ELFIN_GPIO_BASE + GPLPUD_OFFSET)
-#define GPMCON_REG		__REG(ELFIN_GPIO_BASE + GPMCON_OFFSET)
-#define GPMDAT_REG		__REG(ELFIN_GPIO_BASE + GPMDAT_OFFSET)
-#define GPMPUD_REG		__REG(ELFIN_GPIO_BASE + GPMPUD_OFFSET)
-#define GPNCON_REG		__REG(ELFIN_GPIO_BASE + GPNCON_OFFSET)
-#define GPNDAT_REG		__REG(ELFIN_GPIO_BASE + GPNDAT_OFFSET)
-#define GPNPUD_REG		__REG(ELFIN_GPIO_BASE + GPNPUD_OFFSET)
-#define GPOCON_REG		__REG(ELFIN_GPIO_BASE + GPOCON_OFFSET)
-#define GPODAT_REG		__REG(ELFIN_GPIO_BASE + GPODAT_OFFSET)
-#define GPOPUD_REG		__REG(ELFIN_GPIO_BASE + GPOPUD_OFFSET)
-#define GPOCONSLP_REG		__REG(ELFIN_GPIO_BASE + GPOCONSLP_OFFSET)
-#define GPOPUDSLP_REG		__REG(ELFIN_GPIO_BASE + GPOPUDSLP_OFFSET)
-#define GPPCON_REG		__REG(ELFIN_GPIO_BASE + GPPCON_OFFSET)
-#define GPPDAT_REG		__REG(ELFIN_GPIO_BASE + GPPDAT_OFFSET)
-#define GPPPUD_REG		__REG(ELFIN_GPIO_BASE + GPPPUD_OFFSET)
-#define GPPCONSLP_REG		__REG(ELFIN_GPIO_BASE + GPPCONSLP_OFFSET)
-#define GPPPUDSLP_REG		__REG(ELFIN_GPIO_BASE + GPPPUDSLP_OFFSET)
-#define GPQCON_REG		__REG(ELFIN_GPIO_BASE + GPQCON_OFFSET)
-#define GPQDAT_REG		__REG(ELFIN_GPIO_BASE + GPQDAT_OFFSET)
-#define GPQPUD_REG		__REG(ELFIN_GPIO_BASE + GPQPUD_OFFSET)
-#define GPQCONSLP_REG		__REG(ELFIN_GPIO_BASE + GPQCONSLP_OFFSET)
-#define GPQPUDSLP_REG		__REG(ELFIN_GPIO_BASE + GPQPUDSLP_OFFSET)
-
-/*
- * Bus Matrix
- */
-#define ELFIN_MEM_SYS_CFG	0x7e00f120
-
-#define S3C64XX_MEM_SYS_CFG_16BIT	(1 << 12)
-
-#define S3C64XX_MEM_SYS_CFG_NAND	0x0008
-#define S3C64XX_MEM_SYS_CFG_ONENAND	S3C64XX_MEM_SYS_CFG_16BIT
-
-#define GPACON		(ELFIN_GPIO_BASE + GPACON_OFFSET)
-#define GPADAT		(ELFIN_GPIO_BASE + GPADAT_OFFSET)
-#define GPAPUD		(ELFIN_GPIO_BASE + GPAPUD_OFFSET)
-#define GPACONSLP	(ELFIN_GPIO_BASE + GPACONSLP_OFFSET)
-#define GPAPUDSLP	(ELFIN_GPIO_BASE + GPAPUDSLP_OFFSET)
-#define GPBCON		(ELFIN_GPIO_BASE + GPBCON_OFFSET)
-#define GPBDAT		(ELFIN_GPIO_BASE + GPBDAT_OFFSET)
-#define GPBPUD		(ELFIN_GPIO_BASE + GPBPUD_OFFSET)
-#define GPBCONSLP	(ELFIN_GPIO_BASE + GPBCONSLP_OFFSET)
-#define GPBPUDSLP	(ELFIN_GPIO_BASE + GPBPUDSLP_OFFSET)
-#define GPCCON		(ELFIN_GPIO_BASE + GPCCON_OFFSET)
-#define GPCDAT		(ELFIN_GPIO_BASE + GPCDAT_OFFSET)
-#define GPCPUD		(ELFIN_GPIO_BASE + GPCPUD_OFFSET)
-#define GPCCONSLP	(ELFIN_GPIO_BASE + GPCCONSLP_OFFSET)
-#define GPCPUDSLP	(ELFIN_GPIO_BASE + GPCPUDSLP_OFFSET)
-#define GPDCON		(ELFIN_GPIO_BASE + GPDCON_OFFSET)
-#define GPDDAT		(ELFIN_GPIO_BASE + GPDDAT_OFFSET)
-#define GPDPUD		(ELFIN_GPIO_BASE + GPDPUD_OFFSET)
-#define GPDCONSLP	(ELFIN_GPIO_BASE + GPDCONSLP_OFFSET)
-#define GPDPUDSLP	(ELFIN_GPIO_BASE + GPDPUDSLP_OFFSET)
-#define GPECON		(ELFIN_GPIO_BASE + GPECON_OFFSET)
-#define GPEDAT		(ELFIN_GPIO_BASE + GPEDAT_OFFSET)
-#define GPEPUD		(ELFIN_GPIO_BASE + GPEPUD_OFFSET)
-#define GPECONSLP	(ELFIN_GPIO_BASE + GPECONSLP_OFFSET)
-#define GPEPUDSLP	(ELFIN_GPIO_BASE + GPEPUDSLP_OFFSET)
-#define GPFCON		(ELFIN_GPIO_BASE + GPFCON_OFFSET)
-#define GPFDAT		(ELFIN_GPIO_BASE + GPFDAT_OFFSET)
-#define GPFPUD		(ELFIN_GPIO_BASE + GPFPUD_OFFSET)
-#define GPFCONSLP	(ELFIN_GPIO_BASE + GPFCONSLP_OFFSET)
-#define GPFPUDSLP	(ELFIN_GPIO_BASE + GPFPUDSLP_OFFSET)
-#define GPGCON		(ELFIN_GPIO_BASE + GPGCON_OFFSET)
-#define GPGDAT		(ELFIN_GPIO_BASE + GPGDAT_OFFSET)
-#define GPGPUD		(ELFIN_GPIO_BASE + GPGPUD_OFFSET)
-#define GPGCONSLP	(ELFIN_GPIO_BASE + GPGCONSLP_OFFSET)
-#define GPGPUDSLP	(ELFIN_GPIO_BASE + GPGPUDSLP_OFFSET)
-#define GPHCON0		(ELFIN_GPIO_BASE + GPHCON0_OFFSET)
-#define GPHCON1		(ELFIN_GPIO_BASE + GPHCON1_OFFSET)
-#define GPHDAT		(ELFIN_GPIO_BASE + GPHDAT_OFFSET)
-#define GPHPUD		(ELFIN_GPIO_BASE + GPHPUD_OFFSET)
-#define GPHCONSLP	(ELFIN_GPIO_BASE + GPHCONSLP_OFFSET)
-#define GPHPUDSLP	(ELFIN_GPIO_BASE + GPHPUDSLP_OFFSET)
-#define GPICON		(ELFIN_GPIO_BASE + GPICON_OFFSET)
-#define GPIDAT		(ELFIN_GPIO_BASE + GPIDAT_OFFSET)
-#define GPIPUD		(ELFIN_GPIO_BASE + GPIPUD_OFFSET)
-#define GPICONSLP	(ELFIN_GPIO_BASE + GPICONSLP_OFFSET)
-#define GPIPUDSLP	(ELFIN_GPIO_BASE + GPIPUDSLP_OFFSET)
-#define GPJCON		(ELFIN_GPIO_BASE + GPJCON_OFFSET)
-#define GPJDAT		(ELFIN_GPIO_BASE + GPJDAT_OFFSET)
-#define GPJPUD		(ELFIN_GPIO_BASE + GPJPUD_OFFSET)
-#define GPJCONSLP	(ELFIN_GPIO_BASE + GPJCONSLP_OFFSET)
-#define GPJPUDSLP	(ELFIN_GPIO_BASE + GPJPUDSLP_OFFSET)
-#define GPKCON0		(ELFIN_GPIO_BASE + GPKCON0_OFFSET)
-#define GPKCON1		(ELFIN_GPIO_BASE + GPKCON1_OFFSET)
-#define GPKDAT		(ELFIN_GPIO_BASE + GPKDAT_OFFSET)
-#define GPKPUD		(ELFIN_GPIO_BASE + GPKPUD_OFFSET)
-#define GPLCON0		(ELFIN_GPIO_BASE + GPLCON0_OFFSET)
-#define GPLCON1		(ELFIN_GPIO_BASE + GPLCON1_OFFSET)
-#define GPLDAT		(ELFIN_GPIO_BASE + GPLDAT_OFFSET)
-#define GPLPUD		(ELFIN_GPIO_BASE + GPLPUD_OFFSET)
-#define GPMCON		(ELFIN_GPIO_BASE + GPMCON_OFFSET)
-#define GPMDAT		(ELFIN_GPIO_BASE + GPMDAT_OFFSET)
-#define GPMPUD		(ELFIN_GPIO_BASE + GPMPUD_OFFSET)
-#define GPNCON		(ELFIN_GPIO_BASE + GPNCON_OFFSET)
-#define GPNDAT		(ELFIN_GPIO_BASE + GPNDAT_OFFSET)
-#define GPNPUD		(ELFIN_GPIO_BASE + GPNPUD_OFFSET)
-#define GPOCON		(ELFIN_GPIO_BASE + GPOCON_OFFSET)
-#define GPODAT		(ELFIN_GPIO_BASE + GPODAT_OFFSET)
-#define GPOPUD		(ELFIN_GPIO_BASE + GPOPUD_OFFSET)
-#define GPOCONSLP	(ELFIN_GPIO_BASE + GPOCONSLP_OFFSET)
-#define GPOPUDSLP	(ELFIN_GPIO_BASE + GPOPUDSLP_OFFSET)
-#define GPPCON		(ELFIN_GPIO_BASE + GPPCON_OFFSET)
-#define GPPDAT		(ELFIN_GPIO_BASE + GPPDAT_OFFSET)
-#define GPPPUD		(ELFIN_GPIO_BASE + GPPPUD_OFFSET)
-#define GPPCONSLP	(ELFIN_GPIO_BASE + GPPCONSLP_OFFSET)
-#define GPPPUDSLP	(ELFIN_GPIO_BASE + GPPPUDSLP_OFFSET)
-#define GPQCON		(ELFIN_GPIO_BASE + GPQCON_OFFSET)
-#define GPQDAT		(ELFIN_GPIO_BASE + GPQDAT_OFFSET)
-#define GPQPUD		(ELFIN_GPIO_BASE + GPQPUD_OFFSET)
-#define GPQCONSLP	(ELFIN_GPIO_BASE + GPQCONSLP_OFFSET)
-#define GPQPUDSLP	(ELFIN_GPIO_BASE + GPQPUDSLP_OFFSET)
-
-/*
- * Memory controller
- */
-#define ELFIN_SROM_BASE		0x70000000
-
-#define SROM_BW_REG	__REG(ELFIN_SROM_BASE + 0x0)
-#define SROM_BC0_REG	__REG(ELFIN_SROM_BASE + 0x4)
-#define SROM_BC1_REG	__REG(ELFIN_SROM_BASE + 0x8)
-#define SROM_BC2_REG	__REG(ELFIN_SROM_BASE + 0xC)
-#define SROM_BC3_REG	__REG(ELFIN_SROM_BASE + 0x10)
-#define SROM_BC4_REG	__REG(ELFIN_SROM_BASE + 0x14)
-#define SROM_BC5_REG	__REG(ELFIN_SROM_BASE + 0x18)
-
-/*
- * SDRAM Controller
- */
-#define ELFIN_DMC0_BASE		0x7e000000
-#define ELFIN_DMC1_BASE		0x7e001000
-
-#define INDEX_DMC_MEMC_STATUS	0x00
-#define INDEX_DMC_MEMC_CMD	0x04
-#define INDEX_DMC_DIRECT_CMD	0x08
-#define INDEX_DMC_MEMORY_CFG	0x0C
-#define INDEX_DMC_REFRESH_PRD	0x10
-#define INDEX_DMC_CAS_LATENCY	0x14
-#define INDEX_DMC_T_DQSS	0x18
-#define INDEX_DMC_T_MRD		0x1C
-#define INDEX_DMC_T_RAS		0x20
-#define INDEX_DMC_T_RC		0x24
-#define INDEX_DMC_T_RCD		0x28
-#define INDEX_DMC_T_RFC		0x2C
-#define INDEX_DMC_T_RP		0x30
-#define INDEX_DMC_T_RRD		0x34
-#define INDEX_DMC_T_WR		0x38
-#define INDEX_DMC_T_WTR		0x3C
-#define INDEX_DMC_T_XP		0x40
-#define INDEX_DMC_T_XSR		0x44
-#define INDEX_DMC_T_ESR		0x48
-#define INDEX_DMC_MEMORY_CFG2	0x4C
-#define INDEX_DMC_CHIP_0_CFG	0x200
-#define INDEX_DMC_CHIP_1_CFG	0x204
-#define INDEX_DMC_CHIP_2_CFG	0x208
-#define INDEX_DMC_CHIP_3_CFG	0x20C
-#define INDEX_DMC_USER_STATUS	0x300
-#define INDEX_DMC_USER_CONFIG	0x304
-
-/*
- * Memory Chip direct command
- */
-#define DMC_NOP0	0x0c0000
-#define DMC_NOP1	0x1c0000
-#define DMC_PA0		0x000000	/* Precharge all */
-#define DMC_PA1		0x100000
-#define DMC_AR0		0x040000	/* Autorefresh */
-#define DMC_AR1		0x140000
-#define DMC_SDR_MR0	0x080032	/* MRS, CAS 3,  Burst Length 4 */
-#define DMC_SDR_MR1	0x180032
-#define DMC_DDR_MR0	0x080162
-#define DMC_DDR_MR1	0x180162
-#define DMC_mDDR_MR0	0x080032	/* CAS 3, Burst Length 4 */
-#define DMC_mDDR_MR1	0x180032
-#define DMC_mSDR_EMR0	0x0a0000	/* EMRS, DS:Full, PASR:Full Array */
-#define DMC_mSDR_EMR1	0x1a0000
-#define DMC_DDR_EMR0	0x090000
-#define DMC_DDR_EMR1	0x190000
-#define DMC_mDDR_EMR0	0x0a0000	/*  DS:Full, PASR:Full Array */
-#define DMC_mDDR_EMR1	0x1a0000
-
-/*
- * Definitions for memory configuration
- * Set memory configuration
- *	active_chips	= 1'b0 (1 chip)
- *	qos_master_chip	= 3'b000(ARID[3:0])
- *	memory burst	= 3'b010(burst 4)
- *	stop_mem_clock	= 1'b0(disable dynamical stop)
- *	auto_power_down	= 1'b0(disable auto power-down mode)
- *	power_down_prd	= 6'b00_0000(0 cycle for auto power-down)
- *	ap_bit		= 1'b0 (bit position of auto-precharge is 10)
- *	row_bits	= 3'b010(# row address 13)
- *	column_bits	= 3'b010(# column address 10 )
- *
- * Set user configuration
- *	2'b10=SDRAM/mSDRAM, 2'b11=DDR, 2'b01=mDDR
- *
- * Set chip select for chip [n]
- *	 row bank control, bank address 0x3000_0000 ~ 0x37ff_ffff
- *	 CHIP_[n]_CFG=0x30F8,  30: ADDR[31:24], F8: Mask[31:24]
- */
-
-/*
- * Nand flash controller
- */
-#define ELFIN_NAND_BASE		0x70200000
-
-#define NFCONF_OFFSET		0x00
-#define NFCONT_OFFSET		0x04
-#define NFCMMD_OFFSET		0x08
-#define NFADDR_OFFSET		0x0c
-#define NFDATA_OFFSET		0x10
-#define NFMECCDATA0_OFFSET	0x14
-#define NFMECCDATA1_OFFSET	0x18
-#define NFSECCDATA0_OFFSET	0x1c
-#define NFSBLK_OFFSET		0x20
-#define NFEBLK_OFFSET		0x24
-#define NFSTAT_OFFSET		0x28
-#define NFESTAT0_OFFSET		0x2c
-#define NFESTAT1_OFFSET		0x30
-#define NFMECC0_OFFSET		0x34
-#define NFMECC1_OFFSET		0x38
-#define NFSECC_OFFSET		0x3c
-#define NFMLCBITPT_OFFSET	0x40
-
-#define NFCONF			(ELFIN_NAND_BASE + NFCONF_OFFSET)
-#define NFCONT			(ELFIN_NAND_BASE + NFCONT_OFFSET)
-#define NFCMMD			(ELFIN_NAND_BASE + NFCMMD_OFFSET)
-#define NFADDR			(ELFIN_NAND_BASE + NFADDR_OFFSET)
-#define NFDATA			(ELFIN_NAND_BASE + NFDATA_OFFSET)
-#define NFMECCDATA0		(ELFIN_NAND_BASE + NFMECCDATA0_OFFSET)
-#define NFMECCDATA1		(ELFIN_NAND_BASE + NFMECCDATA1_OFFSET)
-#define NFSECCDATA0		(ELFIN_NAND_BASE + NFSECCDATA0_OFFSET)
-#define NFSBLK			(ELFIN_NAND_BASE + NFSBLK_OFFSET)
-#define NFEBLK			(ELFIN_NAND_BASE + NFEBLK_OFFSET)
-#define NFSTAT			(ELFIN_NAND_BASE + NFSTAT_OFFSET)
-#define NFESTAT0		(ELFIN_NAND_BASE + NFESTAT0_OFFSET)
-#define NFESTAT1		(ELFIN_NAND_BASE + NFESTAT1_OFFSET)
-#define NFMECC0			(ELFIN_NAND_BASE + NFMECC0_OFFSET)
-#define NFMECC1			(ELFIN_NAND_BASE + NFMECC1_OFFSET)
-#define NFSECC			(ELFIN_NAND_BASE + NFSECC_OFFSET)
-#define NFMLCBITPT		(ELFIN_NAND_BASE + NFMLCBITPT_OFFSET)
-
-#define NFCONF_REG		__REG(ELFIN_NAND_BASE + NFCONF_OFFSET)
-#define NFCONT_REG		__REG(ELFIN_NAND_BASE + NFCONT_OFFSET)
-#define NFCMD_REG		__REG(ELFIN_NAND_BASE + NFCMMD_OFFSET)
-#define NFADDR_REG		__REG(ELFIN_NAND_BASE + NFADDR_OFFSET)
-#define NFDATA_REG		__REG(ELFIN_NAND_BASE + NFDATA_OFFSET)
-#define NFDATA8_REG		__REGb(ELFIN_NAND_BASE + NFDATA_OFFSET)
-#define NFMECCDATA0_REG		__REG(ELFIN_NAND_BASE + NFMECCDATA0_OFFSET)
-#define NFMECCDATA1_REG		__REG(ELFIN_NAND_BASE + NFMECCDATA1_OFFSET)
-#define NFSECCDATA0_REG		__REG(ELFIN_NAND_BASE + NFSECCDATA0_OFFSET)
-#define NFSBLK_REG		__REG(ELFIN_NAND_BASE + NFSBLK_OFFSET)
-#define NFEBLK_REG		__REG(ELFIN_NAND_BASE + NFEBLK_OFFSET)
-#define NFSTAT_REG		__REG(ELFIN_NAND_BASE + NFSTAT_OFFSET)
-#define NFESTAT0_REG		__REG(ELFIN_NAND_BASE + NFESTAT0_OFFSET)
-#define NFESTAT1_REG		__REG(ELFIN_NAND_BASE + NFESTAT1_OFFSET)
-#define NFMECC0_REG		__REG(ELFIN_NAND_BASE + NFMECC0_OFFSET)
-#define NFMECC1_REG		__REG(ELFIN_NAND_BASE + NFMECC1_OFFSET)
-#define NFSECC_REG		__REG(ELFIN_NAND_BASE + NFSECC_OFFSET)
-#define NFMLCBITPT_REG		__REG(ELFIN_NAND_BASE + NFMLCBITPT_OFFSET)
-
-#define NFCONF_ECC_4BIT		(1<<24)
-
-#define NFCONT_ECC_ENC		(1<<18)
-#define NFCONT_WP		(1<<16)
-#define NFCONT_MECCLOCK		(1<<7)
-#define NFCONT_SECCLOCK		(1<<6)
-#define NFCONT_INITMECC		(1<<5)
-#define NFCONT_INITSECC		(1<<4)
-#define NFCONT_INITECC		(NFCONT_INITMECC | NFCONT_INITSECC)
-#define NFCONT_CS_ALT		(1<<2)
-#define NFCONT_CS		(1<<1)
-#define NFCONT_ENABLE		(1<<0)
-
-#define NFSTAT_ECCENCDONE	(1<<7)
-#define NFSTAT_ECCDECDONE	(1<<6)
-#define NFSTAT_RnB		(1<<0)
-
-#define NFESTAT0_ECCBUSY	(1<<31)
-
-/*
- * Interrupt
- */
-#define ELFIN_VIC0_BASE_ADDR	0x71200000
-#define ELFIN_VIC1_BASE_ADDR	0x71300000
-#define oINTMOD			0x0C	/* VIC INT SELECT (IRQ or FIQ) */
-#define oINTUNMSK		0x10	/* VIC INT EN (write 1 to unmask) */
-#define oINTMSK			0x14	/* VIC INT EN CLEAR (write 1 to mask) */
-#define oINTSUBMSK		0x1C	/* VIC SOFT INT CLEAR */
-#define oVECTADDR		0xF00 /* VIC ADDRESS */
-
-/*
- * Watchdog timer
- */
-#define ELFIN_WATCHDOG_BASE	0x7E004000
-
-#define WTCON_REG		__REG(0x7E004004)
-#define WTDAT_REG		__REG(0x7E004008)
-#define WTCNT_REG		__REG(0x7E00400C)
-
-
-/*
- * UART
- */
-#define ELFIN_UART_BASE		0x7F005000
-
-#define ELFIN_UART0_OFFSET	0x0000
-#define ELFIN_UART1_OFFSET	0x0400
-#define ELFIN_UART2_OFFSET	0x0800
-
-#define ULCON_OFFSET		0x00
-#define UCON_OFFSET		0x04
-#define UFCON_OFFSET		0x08
-#define UMCON_OFFSET		0x0C
-#define UTRSTAT_OFFSET		0x10
-#define UERSTAT_OFFSET		0x14
-#define UFSTAT_OFFSET		0x18
-#define UMSTAT_OFFSET		0x1C
-#define UTXH_OFFSET		0x20
-#define URXH_OFFSET		0x24
-#define UBRDIV_OFFSET		0x28
-#define UDIVSLOT_OFFSET		0x2C
-#define UINTP_OFFSET		0x30
-#define UINTSP_OFFSET		0x34
-#define UINTM_OFFSET		0x38
-
-#define ULCON0_REG		__REG(0x7F005000)
-#define UCON0_REG		__REG(0x7F005004)
-#define UFCON0_REG		__REG(0x7F005008)
-#define UMCON0_REG		__REG(0x7F00500C)
-#define UTRSTAT0_REG		__REG(0x7F005010)
-#define UERSTAT0_REG		__REG(0x7F005014)
-#define UFSTAT0_REG		__REG(0x7F005018)
-#define UMSTAT0_REG		__REG(0x7F00501c)
-#define UTXH0_REG		__REG(0x7F005020)
-#define URXH0_REG		__REG(0x7F005024)
-#define UBRDIV0_REG		__REG(0x7F005028)
-#define UDIVSLOT0_REG		__REG(0x7F00502c)
-#define UINTP0_REG		__REG(0x7F005030)
-#define UINTSP0_REG		__REG(0x7F005034)
-#define UINTM0_REG		__REG(0x7F005038)
-
-#define ULCON1_REG		__REG(0x7F005400)
-#define UCON1_REG		__REG(0x7F005404)
-#define UFCON1_REG		__REG(0x7F005408)
-#define UMCON1_REG		__REG(0x7F00540C)
-#define UTRSTAT1_REG		__REG(0x7F005410)
-#define UERSTAT1_REG		__REG(0x7F005414)
-#define UFSTAT1_REG		__REG(0x7F005418)
-#define UMSTAT1_REG		__REG(0x7F00541c)
-#define UTXH1_REG		__REG(0x7F005420)
-#define URXH1_REG		__REG(0x7F005424)
-#define UBRDIV1_REG		__REG(0x7F005428)
-#define UDIVSLOT1_REG		__REG(0x7F00542c)
-#define UINTP1_REG		__REG(0x7F005430)
-#define UINTSP1_REG		__REG(0x7F005434)
-#define UINTM1_REG		__REG(0x7F005438)
-
-#define UTRSTAT_TX_EMPTY	(1 << 2)
-#define UTRSTAT_RX_READY	(1 << 0)
-#define UART_ERR_MASK		0xF
-
-/*
- * PWM timer
- */
-#define ELFIN_TIMER_BASE	0x7F006000
-
-#define TCFG0_REG	__REG(0x7F006000)
-#define TCFG1_REG	__REG(0x7F006004)
-#define TCON_REG	__REG(0x7F006008)
-#define TCNTB0_REG	__REG(0x7F00600c)
-#define TCMPB0_REG	__REG(0x7F006010)
-#define TCNTO0_REG	__REG(0x7F006014)
-#define TCNTB1_REG	__REG(0x7F006018)
-#define TCMPB1_REG	__REG(0x7F00601c)
-#define TCNTO1_REG	__REG(0x7F006020)
-#define TCNTB2_REG	__REG(0x7F006024)
-#define TCMPB2_REG	__REG(0x7F006028)
-#define TCNTO2_REG	__REG(0x7F00602c)
-#define TCNTB3_REG	__REG(0x7F006030)
-#define TCMPB3_REG	__REG(0x7F006034)
-#define TCNTO3_REG	__REG(0x7F006038)
-#define TCNTB4_REG	__REG(0x7F00603c)
-#define TCNTO4_REG	__REG(0x7F006040)
-
-/* Fields */
-#define fTCFG0_DZONE		Fld(8, 16) /* the dead zone length (=timer 0) */
-#define fTCFG0_PRE1		Fld(8, 8)  /* prescaler value for time 2,3,4 */
-#define fTCFG0_PRE0		Fld(8, 0)  /* prescaler value for time 0,1 */
-#define fTCFG1_MUX4		Fld(4, 16)
-/* bits */
-#define TCFG0_DZONE(x)		FInsrt((x), fTCFG0_DZONE)
-#define TCFG0_PRE1(x)		FInsrt((x), fTCFG0_PRE1)
-#define TCFG0_PRE0(x)		FInsrt((x), fTCFG0_PRE0)
-#define TCON_4_AUTO		(1 << 22)  /* auto reload on/off for Timer 4 */
-#define TCON_4_UPDATE		(1 << 21)  /* manual Update TCNTB4 */
-#define TCON_4_ONOFF		(1 << 20)  /* 0: Stop, 1: start Timer 4 */
-#define COUNT_4_ON		(TCON_4_ONOFF * 1)
-#define COUNT_4_OFF		(TCON_4_ONOFF * 0)
-#define TCON_3_AUTO		(1 << 19)  /* auto reload on/off for Timer 3 */
-#define TIMER3_ATLOAD_ON	(TCON_3_AUTO * 1)
-#define TIMER3_ATLAOD_OFF	FClrBit(TCON, TCON_3_AUTO)
-#define TCON_3_INVERT		(1 << 18)  /* 1: Inverter on for TOUT3 */
-#define TIMER3_IVT_ON		(TCON_3_INVERT * 1)
-#define TIMER3_IVT_OFF		(FClrBit(TCON, TCON_3_INVERT))
-#define TCON_3_MAN		(1 << 17)  /* manual Update TCNTB3,TCMPB3 */
-#define TIMER3_MANUP		(TCON_3_MAN*1)
-#define TIMER3_NOP		(FClrBit(TCON, TCON_3_MAN))
-#define TCON_3_ONOFF		(1 << 16)  /* 0: Stop, 1: start Timer 3 */
-#define TIMER3_ON		(TCON_3_ONOFF * 1)
-#define TIMER3_OFF		(FClrBit(TCON, TCON_3_ONOFF))
-
-#if defined(CONFIG_CLK_400_100_50)
-#define STARTUP_AMDIV		400
-#define STARTUP_MDIV		400
-#define STARTUP_PDIV		6
-#define STARTUP_SDIV		1
-#elif defined(CONFIG_CLK_400_133_66)
-#define STARTUP_AMDIV		400
-#define STARTUP_MDIV		533
-#define STARTUP_PDIV		6
-#define STARTUP_SDIV		1
-#elif defined(CONFIG_CLK_533_133_66)
-#define STARTUP_AMDIV		533
-#define STARTUP_MDIV		533
-#define STARTUP_PDIV		6
-#define STARTUP_SDIV		1
-#elif defined(CONFIG_CLK_667_133_66)
-#define STARTUP_AMDIV		667
-#define STARTUP_MDIV		533
-#define STARTUP_PDIV		6
-#define STARTUP_SDIV		1
-#endif
-
-#define	STARTUP_PCLKDIV		3
-#define STARTUP_HCLKX2DIV	1
-#define STARTUP_HCLKDIV		1
-#define STARTUP_MPLLDIV		1
-#define STARTUP_APLLDIV		0
-
-#define CLK_DIV_VAL	((STARTUP_PCLKDIV << 12) | (STARTUP_HCLKX2DIV << 9) | \
-	(STARTUP_HCLKDIV << 8) | (STARTUP_MPLLDIV<<4) | STARTUP_APLLDIV)
-#define MPLL_VAL	((1 << 31) | (STARTUP_MDIV << 16) | \
-	(STARTUP_PDIV << 8) | STARTUP_SDIV)
-#define STARTUP_MPLL	(((CONFIG_SYS_CLK_FREQ >> STARTUP_SDIV) / \
-	STARTUP_PDIV) * STARTUP_MDIV)
-
-#if defined(CONFIG_SYNC_MODE)
-#define APLL_VAL	((1 << 31) | (STARTUP_MDIV << 16) | \
-	(STARTUP_PDIV << 8) | STARTUP_SDIV)
-#define STARTUP_APLL	(((CONFIG_SYS_CLK_FREQ >> STARTUP_SDIV) / \
-	STARTUP_PDIV) * STARTUP_MDIV)
-#define STARTUP_HCLK	(STARTUP_MPLL / (STARTUP_HCLKX2DIV + 1) / \
-	(STARTUP_HCLKDIV + 1))
-#else
-#define APLL_VAL	((1 << 31) | (STARTUP_AMDIV << 16) | \
-	(STARTUP_PDIV << 8) | STARTUP_SDIV)
-#define STARTUP_APLL	(((CONFIG_SYS_CLK_FREQ >> STARTUP_SDIV) / \
-	STARTUP_PDIV) * STARTUP_AMDIV)
-#define STARTUP_HCLK	(STARTUP_MPLL / (STARTUP_HCLKX2DIV + 1) / \
-	(STARTUP_HCLKDIV + 1))
-#endif
-
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define DMC1_MEM_CFG	0x00010012	/* burst 4, 13-bit row, 10-bit col */
-#define DMC1_MEM_CFG2	0xB45
-#define DMC1_CHIP0_CFG	0x150F8		/* 0x5000_0000~0x57ff_ffff (128 MiB) */
-#define DMC_DDR_32_CFG	0x0 		/* 32bit, DDR */
-
-/* Memory Parameters */
-/* DDR Parameters */
-#define DDR_tREFRESH		7800	/* ns */
-#define DDR_tRAS		45	/* ns (min: 45ns)*/
-#define DDR_tRC 		68	/* ns (min: 67.5ns)*/
-#define DDR_tRCD		23	/* ns (min: 22.5ns)*/
-#define DDR_tRFC		80	/* ns (min: 80ns)*/
-#define DDR_tRP 		23	/* ns (min: 22.5ns)*/
-#define DDR_tRRD		15	/* ns (min: 15ns)*/
-#define DDR_tWR 		15	/* ns (min: 15ns)*/
-#define DDR_tXSR		120	/* ns (min: 120ns)*/
-#define DDR_CASL		3	/* CAS Latency 3 */
-
-/*
- * mDDR memory configuration
- */
-
-#define NS_TO_CLK(t)		((STARTUP_HCLK / 1000 * (t) - 1) / 1000000)
-
-#define DMC_DDR_BA_EMRS 	2
-#define DMC_DDR_MEM_CASLAT	3
-/* 6   Set Cas Latency to 3 */
-#define DMC_DDR_CAS_LATENCY	(DDR_CASL << 1)
-/* Min 0.75 ~ 1.25 */
-#define DMC_DDR_t_DQSS		1
-/* Min 2 tck */
-#define DMC_DDR_t_MRD		2
-/* 7, Min 45ns */
-#define DMC_DDR_t_RAS		(NS_TO_CLK(DDR_tRAS) + 1)
-/* 10, Min 67.5ns */
-#define DMC_DDR_t_RC		(NS_TO_CLK(DDR_tRC) + 1)
-/* 4,5(TRM), Min 22.5ns */
-#define DMC_DDR_t_RCD		(NS_TO_CLK(DDR_tRCD) + 1)
-#define DMC_DDR_schedule_RCD	((DMC_DDR_t_RCD - 3) << 3)
-/* 11,18(TRM) Min 80ns */
-#define DMC_DDR_t_RFC		(NS_TO_CLK(DDR_tRFC) + 1)
-#define DMC_DDR_schedule_RFC	((DMC_DDR_t_RFC - 3) << 5)
-/* 4, 5(TRM) Min 22.5ns */
-#define DMC_DDR_t_RP		(NS_TO_CLK(DDR_tRP) + 1)
-#define DMC_DDR_schedule_RP	((DMC_DDR_t_RP - 3) << 3)
-/* 3, Min 15ns */
-#define DMC_DDR_t_RRD		(NS_TO_CLK(DDR_tRRD) + 1)
-/* Min 15ns */
-#define DMC_DDR_t_WR		(NS_TO_CLK(DDR_tWR) + 1)
-#define DMC_DDR_t_WTR		2
-/* 1tck + tIS(1.5ns) */
-#define DMC_DDR_t_XP		2
-/* 17, Min 120ns */
-#define DMC_DDR_t_XSR		(NS_TO_CLK(DDR_tXSR) + 1)
-#define DMC_DDR_t_ESR		DMC_DDR_t_XSR
-/* TRM 2656 */
-#define DMC_DDR_REFRESH_PRD	(NS_TO_CLK(DDR_tREFRESH))
-/* 2b01 : mDDR */
-#define DMC_DDR_USER_CONFIG	1
-
-#ifndef __ASSEMBLY__
-enum s3c64xx_uarts_nr {
-	S3C64XX_UART0,
-	S3C64XX_UART1,
-	S3C64XX_UART2,
-};
-
-#include "s3c64x0.h"
-
-static inline s3c64xx_uart *s3c64xx_get_base_uart(enum s3c64xx_uarts_nr nr)
-{
-	return (s3c64xx_uart *)(ELFIN_UART_BASE + (nr * 0x400));
-}
-#endif
-
-#endif /*__S3C6400_H__*/
diff --git a/arch/arm/include/asm/arch-s3c64xx/s3c64x0.h b/arch/arm/include/asm/arch-s3c64xx/s3c64x0.h
deleted file mode 100644
index 0bbf1d0c43..0000000000
--- a/arch/arm/include/asm/arch-s3c64xx/s3c64x0.h
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * (C) Copyright 2003
- * David MÃŒller ELSOFT AG Switzerland. d.mueller@elsoft.ch
- *
- * (C) Copyright 2008
- * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/************************************************
- * NAME	    : S3C64XX.h
- * Version  : 31.3.2003
- *
- * common stuff for SAMSUNG S3C64XX SoC
- ************************************************/
-
-#ifndef __S3C64XX_H__
-#define __S3C64XX_H__
-
-#if defined(CONFIG_SYNC_MODE) && defined(CONFIG_S3C6400)
-#error CONFIG_SYNC_MODE unavailable on S3C6400, please, fix your configuration!
-#endif
-
-#include <asm/types.h>
-
-/* UART (see manual chapter 11) */
-typedef struct {
-	volatile u32	ULCON;
-	volatile u32	UCON;
-	volatile u32	UFCON;
-	volatile u32	UMCON;
-	volatile u32	UTRSTAT;
-	volatile u32	UERSTAT;
-	volatile u32	UFSTAT;
-	volatile u32	UMSTAT;
-#ifdef __BIG_ENDIAN
-	volatile u8	res1[3];
-	volatile u8	UTXH;
-	volatile u8	res2[3];
-	volatile u8	URXH;
-#else /* Little Endian */
-	volatile u8	UTXH;
-	volatile u8	res1[3];
-	volatile u8	URXH;
-	volatile u8	res2[3];
-#endif
-	volatile u32	UBRDIV;
-#ifdef __BIG_ENDIAN
-	volatile u8	res3[2];
-	volatile u16	UDIVSLOT;
-#else
-	volatile u16	UDIVSLOT;
-	volatile u8	res3[2];
-#endif
-} s3c64xx_uart;
-
-/* PWM TIMER (see manual chapter 10) */
-typedef struct {
-	volatile u32	TCNTB;
-	volatile u32	TCMPB;
-	volatile u32	TCNTO;
-} s3c64xx_timer;
-
-typedef struct {
-	volatile u32	TCFG0;
-	volatile u32	TCFG1;
-	volatile u32	TCON;
-	s3c64xx_timer	ch[4];
-	volatile u32	TCNTB4;
-	volatile u32	TCNTO4;
-} s3c64xx_timers;
-
-#endif /*__S3C64XX_H__*/
diff --git a/arch/arm/include/asm/emif.h b/arch/arm/include/asm/emif.h
index c5d1e6c837..5f11d7b72e 100644
--- a/arch/arm/include/asm/emif.h
+++ b/arch/arm/include/asm/emif.h
@@ -1165,7 +1165,6 @@ void get_lpddr2_mr_regs(const struct lpddr2_mr_regs **regs);
 #ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
 extern u32 *const T_num;
 extern u32 *const T_den;
-extern u32 *const emif_sizes;
 #endif
 
 void config_data_eye_leveling_samples(u32 emif_base);
diff --git a/arch/arm/include/asm/mach-types.h b/arch/arm/include/asm/mach-types.h
index a676b6d905..440b041a16 100644
--- a/arch/arm/include/asm/mach-types.h
+++ b/arch/arm/include/asm/mach-types.h
@@ -223,7 +223,6 @@ extern unsigned int __machine_arch_type;
 #define MACH_TYPE_MIOA701              1257
 #define MACH_TYPE_ARMADILLO5X0         1260
 #define MACH_TYPE_CC9P9360JS           1264
-#define MACH_TYPE_SMDK6400             1270
 #define MACH_TYPE_NOKIA_N800           1271
 #define MACH_TYPE_EP80219              1281
 #define MACH_TYPE_GORAMO_MLR           1292
@@ -3640,18 +3639,6 @@ extern unsigned int __machine_arch_type;
 # define machine_is_cc9p9360js()	(0)
 #endif
 
-#ifdef CONFIG_MACH_SMDK6400
-# ifdef machine_arch_type
-#  undef machine_arch_type
-#  define machine_arch_type	__machine_arch_type
-# else
-#  define machine_arch_type	MACH_TYPE_SMDK6400
-# endif
-# define machine_is_smdk6400()	(machine_arch_type == MACH_TYPE_SMDK6400)
-#else
-# define machine_is_smdk6400()	(0)
-#endif
-
 #ifdef CONFIG_MACH_NOKIA_N800
 # ifdef machine_arch_type
 #  undef machine_arch_type
diff --git a/arch/arm/include/asm/omap_gpmc.h b/arch/arm/include/asm/omap_gpmc.h
new file mode 100644
index 0000000000..5cb1df179a
--- /dev/null
+++ b/arch/arm/include/asm/omap_gpmc.h
@@ -0,0 +1,87 @@
+/*
+ * (C) Copyright 2004-2008 Texas Instruments, <www.ti.com>
+ * Rohit Choraria <rohitkc@ti.com>
+ *
+ * (C) Copyright 2013 Andreas Bießmann <andreas.devel@googlemail.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __ASM_OMAP_GPMC_H
+#define __ASM_OMAP_GPMC_H
+
+#include <asm/arch/omap_gpmc.h>
+
+#define GPMC_BUF_EMPTY	0
+#define GPMC_BUF_FULL	1
+
+#define ECCCLEAR	(0x1 << 8)
+#define ECCRESULTREG1	(0x1 << 0)
+#define ECCSIZE512BYTE	0xFF
+#define ECCSIZE1	(ECCSIZE512BYTE << 22)
+#define ECCSIZE0	(ECCSIZE512BYTE << 12)
+#define ECCSIZE0SEL	(0x000 << 0)
+
+/* Generic ECC Layouts */
+/* Large Page x8 NAND device Layout */
+#ifdef GPMC_NAND_ECC_LP_x8_LAYOUT
+#define GPMC_NAND_HW_ECC_LAYOUT {\
+	.eccbytes = 12,\
+	.eccpos = {1, 2, 3, 4, 5, 6, 7, 8,\
+		9, 10, 11, 12},\
+	.oobfree = {\
+		{.offset = 13,\
+		 .length = 51 } } \
+}
+#endif
+
+/* Large Page x16 NAND device Layout */
+#ifdef GPMC_NAND_ECC_LP_x16_LAYOUT
+#define GPMC_NAND_HW_ECC_LAYOUT {\
+	.eccbytes = 12,\
+	.eccpos = {2, 3, 4, 5, 6, 7, 8, 9,\
+		10, 11, 12, 13},\
+	.oobfree = {\
+		{.offset = 14,\
+		 .length = 50 } } \
+}
+#endif
+
+/* Small Page x8 NAND device Layout */
+#ifdef GPMC_NAND_ECC_SP_x8_LAYOUT
+#define GPMC_NAND_HW_ECC_LAYOUT {\
+	.eccbytes = 3,\
+	.eccpos = {1, 2, 3},\
+	.oobfree = {\
+		{.offset = 4,\
+		 .length = 12 } } \
+}
+#endif
+
+/* Small Page x16 NAND device Layout */
+#ifdef GPMC_NAND_ECC_SP_x16_LAYOUT
+#define GPMC_NAND_HW_ECC_LAYOUT {\
+	.eccbytes = 3,\
+	.eccpos = {2, 3, 4},\
+	.oobfree = {\
+		{.offset = 5,\
+		 .length = 11 } } \
+}
+#endif
+
+#endif /* __ASM_OMAP_GPMC_H */
diff --git a/arch/arm/lib/crt0.S b/arch/arm/lib/crt0.S
index 37d9927d2c..a9657d190f 100644
--- a/arch/arm/lib/crt0.S
+++ b/arch/arm/lib/crt0.S
@@ -24,6 +24,7 @@
 
 #include <config.h>
 #include <asm-offsets.h>
+#include <linux/linkage.h>
 
 /*
  * This file handles the target-independent stages of the U-Boot
@@ -63,46 +64,20 @@
  *    have some work left to do at this point regarding memory, so
  *    call c_runtime_cpu_setup.
  *
- * 6. Branch to either nand_boot() or board_init_r().
+ * 6. Branch to board_init_r().
  */
 
 /*
- * declare nand_boot() or board_init_r() to jump to at end of crt0
- */
-
-#if defined(CONFIG_NAND_SPL)
-
-.globl nand_boot
-
-#elif ! defined(CONFIG_SPL_BUILD)
-
-.globl board_init_r
-
-#endif
-
-/*
- * start and end of BSS
- */
-
-.globl __bss_start
-.globl __bss_end
-
-/*
  * entry point of crt0 sequence
  */
 
-.global _main
-
-_main:
+ENTRY(_main)
 
 /*
  * Set up initial C runtime environment and call board_init_f(0).
  */
 
-#if defined(CONFIG_NAND_SPL)
-	/* deprecated, use instead CONFIG_SPL_BUILD */
-	ldr	sp, =(CONFIG_SYS_INIT_SP_ADDR)
-#elif defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_STACK)
+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_STACK)
 	ldr	sp, =(CONFIG_SPL_STACK)
 #else
 	ldr	sp, =(CONFIG_SYS_INIT_SP_ADDR)
@@ -118,8 +93,8 @@ _main:
 
 /*
  * Set up intermediate environment (new sp and gd) and call
- * relocate_code(addr_sp, gd, addr_moni). Trick here is that
- * we'll return 'here' but relocated.
+ * relocate_code(addr_moni). Trick here is that we'll return
+ * 'here' but relocated.
  */
 
 	ldr	sp, [r8, #GD_START_ADDR_SP]	/* r8 = gd->start_addr_sp */
@@ -130,9 +105,7 @@ _main:
 	adr	lr, here
 	ldr	r0, [r8, #GD_RELOC_OFF]		/* lr = gd->start_addr_sp */
 	add	lr, lr, r0
-	ldr	r0, [r8, #GD_START_ADDR_SP]	/* r0 = gd->start_addr_sp */
-	mov	r1, r8				/* r1 = gd */
-	ldr	r2, [r8, #GD_RELOCADDR]		/* r2 = gd->relocaddr */
+	ldr	r0, [r8, #GD_RELOCADDR]		/* r0 = gd->relocaddr */
 	b	relocate_code
 here:
 
@@ -153,21 +126,14 @@ clbss_l:cmp	r0, r1			/* while not at end of BSS */
 	bl coloured_LED_init
 	bl red_led_on
 
-#if defined(CONFIG_NAND_SPL)
-
-	/* call _nand_boot() */
-	ldr     pc, =nand_boot
-
-#else
-
 	/* call board_init_r(gd_t *id, ulong dest_addr) */
 	mov	r0, r8			/* gd_t */
 	ldr	r1, [r8, #GD_RELOCADDR]	/* dest_addr */
 	/* call board_init_r */
 	ldr	pc, =board_init_r	/* this is auto-relocated! */
 
-#endif
-
 	/* we should not return here. */
 
 #endif
+
+ENDPROC(_main)