sunxi: Move cpu independent code to mach directory

Some of the code in arch/arm/cpu/armv7/sunxi is actually armv7 specific, while
most of it is just generic code that could as well be used on an AArch64 SoC.

Move all files that are not really tied to armv7 into a new mach-sunxi
directory.

Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

1 files changed, 113 insertions, 0 deletions

diff --git a/arch/arm/mach-sunxi/pmic_bus.c b/arch/arm/mach-sunxi/pmic_bus.c
new file mode 100644
index 0000000000..5b81a8d8e1
--- /dev/null
+++ b/arch/arm/mach-sunxi/pmic_bus.c
@@ -0,0 +1,113 @@
+/*
+ * (C) Copyright 2015 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Sunxi PMIC bus access helpers
+ *
+ * The axp152 & axp209 use an i2c bus, the axp221 uses the p2wi bus and the
+ * axp223 uses the rsb bus, these functions abstract this.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/p2wi.h>
+#include <asm/arch/rsb.h>
+#include <i2c.h>
+#include <asm/arch/pmic_bus.h>
+
+#define AXP152_I2C_ADDR			0x30
+
+#define AXP209_I2C_ADDR			0x34
+
+#define AXP221_CHIP_ADDR		0x68
+#define AXP221_CTRL_ADDR		0x3e
+#define AXP221_INIT_DATA		0x3e
+
+/* AXP818 device and runtime addresses are same as AXP223 */
+#define AXP223_DEVICE_ADDR		0x3a3
+#define AXP223_RUNTIME_ADDR		0x2d
+
+int pmic_bus_init(void)
+{
+	/* This cannot be 0 because it is used in SPL before BSS is ready */
+	static int needs_init = 1;
+	__maybe_unused int ret;
+
+	if (!needs_init)
+		return 0;
+
+#if defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER
+# ifdef CONFIG_MACH_SUN6I
+	p2wi_init();
+	ret = p2wi_change_to_p2wi_mode(AXP221_CHIP_ADDR, AXP221_CTRL_ADDR,
+				       AXP221_INIT_DATA);
+# else
+	ret = rsb_init();
+	if (ret)
+		return ret;
+
+	ret = rsb_set_device_address(AXP223_DEVICE_ADDR, AXP223_RUNTIME_ADDR);
+# endif
+	if (ret)
+		return ret;
+#endif
+
+	needs_init = 0;
+	return 0;
+}
+
+int pmic_bus_read(u8 reg, u8 *data)
+{
+#ifdef CONFIG_AXP152_POWER
+	return i2c_read(AXP152_I2C_ADDR, reg, 1, data, 1);
+#elif defined CONFIG_AXP209_POWER
+	return i2c_read(AXP209_I2C_ADDR, reg, 1, data, 1);
+#elif defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER
+# ifdef CONFIG_MACH_SUN6I
+	return p2wi_read(reg, data);
+# else
+	return rsb_read(AXP223_RUNTIME_ADDR, reg, data);
+# endif
+#endif
+}
+
+int pmic_bus_write(u8 reg, u8 data)
+{
+#ifdef CONFIG_AXP152_POWER
+	return i2c_write(AXP152_I2C_ADDR, reg, 1, &data, 1);
+#elif defined CONFIG_AXP209_POWER
+	return i2c_write(AXP209_I2C_ADDR, reg, 1, &data, 1);
+#elif defined CONFIG_AXP221_POWER || defined CONFIG_AXP818_POWER
+# ifdef CONFIG_MACH_SUN6I
+	return p2wi_write(reg, data);
+# else
+	return rsb_write(AXP223_RUNTIME_ADDR, reg, data);
+# endif
+#endif
+}
+
+int pmic_bus_setbits(u8 reg, u8 bits)
+{
+	int ret;
+	u8 val;
+
+	ret = pmic_bus_read(reg, &val);
+	if (ret)
+		return ret;
+
+	val |= bits;
+	return pmic_bus_write(reg, val);
+}
+
+int pmic_bus_clrbits(u8 reg, u8 bits)
+{
+	int ret;
+	u8 val;
+
+	ret = pmic_bus_read(reg, &val);
+	if (ret)
+		return ret;
+
+	val &= ~bits;
+	return pmic_bus_write(reg, val);
+}