sunxi: Move cpu independent code to mach directory

Some of the code in arch/arm/cpu/armv7/sunxi is actually armv7 specific, while
most of it is just generic code that could as well be used on an AArch64 SoC.

Move all files that are not really tied to armv7 into a new mach-sunxi
directory.

Signed-off-by: Alexander Graf <agraf@suse.de>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

1 files changed, 50 insertions, 0 deletions

diff --git a/arch/arm/mach-sunxi/Makefile b/arch/arm/mach-sunxi/Makefile
new file mode 100644
index 0000000000..114cc0320f
--- /dev/null
+++ b/arch/arm/mach-sunxi/Makefile
@@ -0,0 +1,50 @@
+#
+# (C) Copyright 2012 Henrik Nordstrom <henrik@henriknordstrom.net>
+#
+# Based on some other Makefile
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y	+= board.o
+obj-y	+= clock.o
+obj-y	+= cpu_info.o
+obj-y	+= dram_helpers.o
+obj-y	+= pinmux.o
+ifndef CONFIG_MACH_SUN9I
+obj-y	+= usb_phy.o
+endif
+obj-$(CONFIG_MACH_SUN6I)	+= prcm.o
+obj-$(CONFIG_MACH_SUN8I)	+= prcm.o
+obj-$(CONFIG_MACH_SUN9I)	+= prcm.o
+obj-$(CONFIG_MACH_SUN6I)	+= p2wi.o
+obj-$(CONFIG_MACH_SUN8I)	+= rsb.o
+obj-$(CONFIG_MACH_SUN9I)	+= rsb.o
+obj-$(CONFIG_MACH_SUN4I)	+= clock_sun4i.o
+obj-$(CONFIG_MACH_SUN5I)	+= clock_sun4i.o
+obj-$(CONFIG_MACH_SUN6I)	+= clock_sun6i.o
+obj-$(CONFIG_MACH_SUN7I)	+= clock_sun4i.o
+ifdef CONFIG_MACH_SUN8I_A83T
+obj-y				+= clock_sun8i_a83t.o
+else
+obj-$(CONFIG_MACH_SUN8I)	+= clock_sun6i.o
+endif
+obj-$(CONFIG_MACH_SUN9I)	+= clock_sun9i.o
+
+obj-$(CONFIG_AXP152_POWER)	+= pmic_bus.o
+obj-$(CONFIG_AXP209_POWER)	+= pmic_bus.o
+obj-$(CONFIG_AXP221_POWER)	+= pmic_bus.o
+obj-$(CONFIG_AXP818_POWER)	+= pmic_bus.o
+
+ifdef CONFIG_SPL_BUILD
+obj-$(CONFIG_MACH_SUN4I)	+= dram_sun4i.o
+obj-$(CONFIG_MACH_SUN5I)	+= dram_sun4i.o
+obj-$(CONFIG_MACH_SUN6I)	+= dram_sun6i.o
+obj-$(CONFIG_MACH_SUN7I)	+= dram_sun4i.o
+obj-$(CONFIG_MACH_SUN8I_A23)	+= dram_sun8i_a23.o
+obj-$(CONFIG_MACH_SUN8I_A33)	+= dram_sun8i_a33.o
+obj-$(CONFIG_MACH_SUN8I_A83T)	+= dram_sun8i_a83t.o
+obj-$(CONFIG_MACH_SUN8I_H3)	+= dram_sun8i_h3.o
+endif