ARM: DRA7: Add support for manual mode configuration

In addition to the regular mux configuration, certain pins of DRA7
require to have "manual mode" also programmed, when predefined
delay characteristics cannot be used for the interface.

struct iodelay_cfg_entry is introduced for populating
manual mode IO timings.
For configuring manual mode, along with the normal pad
configuration do the following steps:
- Select MODESELECT field of each assocaited PAD.
  CTRL_CORE_PAD_XXX[8]:MODESELECT = 1(Enable MANUAL_MODE macro along with mux)
- Populate A_DELAY, G_DELAY values that are specified in DATA MANUAL.
  And pass the offset of the CFG_XXX register in iodelay_cfg_entry.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>

3 files changed, 40 insertions, 1 deletions

diff --git a/arch/arm/include/asm/arch-omap5/dra7xx_iodelay.h b/arch/arm/include/asm/arch-omap5/dra7xx_iodelay.h
index a924629a35..2f53d85283 100644
--- a/arch/arm/include/asm/arch-omap5/dra7xx_iodelay.h
+++ b/arch/arm/include/asm/arch-omap5/dra7xx_iodelay.h
@@ -35,6 +35,14 @@
 #define CFG_IODELAY_UNLOCK_KEY		0x0000AAAA
 #define CFG_IODELAY_LOCK_KEY		0x0000AAAB
 
+/* CONFIG_REG_3/4 */
+#define CFG_REG_3_OFFSET	0x18
+#define CFG_REG_4_OFFSET	0x1C
+#define CFG_REG_DLY_CNT_SHIFT	16
+#define CFG_REG_DLY_CNT_MASK	(0xFFFF << 16)
+#define CFG_REG_REF_CNT_SHIFT	0
+#define CFG_REG_REF_CNT_MASK	(0xFFFF << 0)
+
 /* CTRL_CORE_SMA_SW_0 */
 #define CTRL_ISOLATE_SHIFT		2
 #define CTRL_ISOLATE_MASK		(1 << 2)
@@ -53,6 +61,23 @@
 #define ERR_DEISOLATE_IO		0x2
 #define ERR_ISOLATE_IO			0x4
 #define ERR_UPDATE_DELAY		0x8
+#define ERR_CPDE			0x3
+#define ERR_FPDE			0x5
+
+/* CFG_XXX */
+#define CFG_X_SIGNATURE_SHIFT		12
+#define CFG_X_SIGNATURE_MASK		(0x3F << 12)
+#define CFG_X_LOCK_SHIFT		10
+#define CFG_X_LOCK_MASK			(0x1 << 10)
+#define CFG_X_COARSE_DLY_SHIFT		5
+#define CFG_X_COARSE_DLY_MASK		(0x1F << 5)
+#define CFG_X_FINE_DLY_SHIFT		0
+#define CFG_X_FINE_DLY_MASK		(0x1F << 0)
+#define CFG_X_SIGNATURE			0x29
+#define CFG_X_LOCK			1
+
+void __recalibrate_iodelay(struct pad_conf_entry const *pad, int npads,
+			   struct iodelay_cfg_entry const *iodelay,
+			   int niodelays);
 
-void __recalibrate_iodelay(struct pad_conf_entry const *array, int npads);
 #endif
diff --git a/arch/arm/include/asm/arch-omap5/mux_dra7xx.h b/arch/arm/include/asm/arch-omap5/mux_dra7xx.h
index 13c288b5d3..2115abb555 100644
--- a/arch/arm/include/asm/arch-omap5/mux_dra7xx.h
+++ b/arch/arm/include/asm/arch-omap5/mux_dra7xx.h
@@ -61,6 +61,8 @@
 #define MODE_SELECT		(1 << 8)
 #define DELAYMODE_SHIFT		4
 
+#define MANUAL_MODE	MODE_SELECT
+
 #define VIRTUAL_MODE0	(MODE_SELECT | (0x0 << DELAYMODE_SHIFT))
 #define VIRTUAL_MODE1	(MODE_SELECT | (0x1 << DELAYMODE_SHIFT))
 #define VIRTUAL_MODE2	(MODE_SELECT | (0x2 << DELAYMODE_SHIFT))
diff --git a/arch/arm/include/asm/arch-omap5/sys_proto.h b/arch/arm/include/asm/arch-omap5/sys_proto.h
index b41bf15a08..6da8297c72 100644
--- a/arch/arm/include/asm/arch-omap5/sys_proto.h
+++ b/arch/arm/include/asm/arch-omap5/sys_proto.h
@@ -18,6 +18,18 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+/*
+ * Structure for Iodelay configuration registers.
+ * Theoretical max for g_delay is 21560 ps.
+ * Theoretical max for a_delay is 1/3rd of g_delay max.
+ * So using u16 for both a/g_delay.
+ */
+struct iodelay_cfg_entry {
+	u16 offset;
+	u16 a_delay;
+	u16 g_delay;
+};
+
 struct pad_conf_entry {
 	u32 offset;
 	u32 val;