diff options
| author | Hans de Goede <hdegoede@redhat.com> | 2016-03-14 17:37:09 +0100 |
|---|---|---|
| committer | Hans de Goede <hdegoede@redhat.com> | 2016-03-23 22:04:13 +0100 |
| commit | 80e5f83c0fc4bf42110cc55ce671ad7ddc7b08a4 (patch) | |
| tree | 39fe4223027504cf9fdfa54c2212401be4a95b92 /arch/arm/dts/sun9i-a80-optimus.dts | |
| parent | 4bb656e9dde2019cb42ac4c27b3a114a801ad127 (diff) | |
| download | blackbird-obmc-uboot-80e5f83c0fc4bf42110cc55ce671ad7ddc7b08a4.tar.gz blackbird-obmc-uboot-80e5f83c0fc4bf42110cc55ce671ad7ddc7b08a4.zip | |
sunxi: Sync dts files with the upstream kernel
Sync dts files with the upstream kernel including
changes queued for 4.6:
https://git.kernel.org/cgit/linux/kernel/git/mripard/linux.git/commit/?h=sunxi/dt-for-4.6
Note this adds a number of new unused board dts files. I've asked the
authors of the kernel commits adding these to submit a matching defconfig
to u-boot.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
Diffstat (limited to 'arch/arm/dts/sun9i-a80-optimus.dts')
| -rw-r--r-- | arch/arm/dts/sun9i-a80-optimus.dts | 48 |
1 files changed, 26 insertions, 22 deletions
diff --git a/arch/arm/dts/sun9i-a80-optimus.dts b/arch/arm/dts/sun9i-a80-optimus.dts index 6ce4b5e8b6..d7a20d92b1 100644 --- a/arch/arm/dts/sun9i-a80-optimus.dts +++ b/arch/arm/dts/sun9i-a80-optimus.dts @@ -65,7 +65,7 @@ leds { compatible = "gpio-leds"; pinctrl-names = "default"; - pinctrl-0 = <&led_pins_optimus>; + pinctrl-0 = <&led_pins_optimus>, <&led_r_pins_optimus>; /* The LED names match those found on the board */ @@ -74,7 +74,10 @@ gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; }; - /* led3 is on PM15, in R_PIO */ + led3 { + label = "optimus:led3:usr"; + gpios = <&r_pio 1 15 GPIO_ACTIVE_HIGH>; /* PM15 */ + }; led4 { label = "optimus:led4:usr"; @@ -106,17 +109,6 @@ status = "okay"; }; -&i2c3 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c3_pins_a>; - status = "okay"; -}; - -&i2c3_pins_a { - /* Enable internal pull-up */ - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; -}; - &ohci0 { status = "okay"; }; @@ -171,30 +163,42 @@ vmmc-supply = <®_vcc3v0>; bus-width = <8>; non-removable; + cap-mmc-hw-reset; status = "okay"; }; +&mmc2_8bit_pins { + /* Increase drive strength for DDR modes */ + allwinner,drive = <SUN4I_PINCTRL_40_MA>; +}; + ®_usb1_vbus { pinctrl-0 = <&usb1_vbus_pin_optimus>; gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ status = "okay"; }; -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; +&r_ir { status = "okay"; }; -&uart4 { - pinctrl-names = "default"; - pinctrl-0 = <&uart4_pins_a>; +&r_pio { + led_r_pins_optimus: led-pins@1 { + allwinner,pins = "PM15"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +&r_rsb { status = "okay"; }; -&uart4_pins_a { - /* Enable internal pull-up */ - allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; }; &usbphy1 { |
