Merge branch 'master' of git://git.denx.de/u-boot-arm

10 files changed, 104 insertions, 55 deletions

diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c
index 28c16f8d02..7fe049e513 100644
--- a/arch/arm/cpu/armv7/am33xx/board.c
+++ b/arch/arm/cpu/armv7/am33xx/board.c
@@ -144,6 +144,19 @@ int arch_misc_init(void)
 
 #ifndef CONFIG_SKIP_LOWLEVEL_INIT
 /*
+ * In the case of non-SPL based booting we'll want to call these
+ * functions a tiny bit later as it will require gd to be set and cleared
+ * and that's not true in s_init in this case so we cannot do it there.
+ */
+int board_early_init_f(void)
+{
+	prcm_init();
+	set_mux_conf_regs();
+
+	return 0;
+}
+
+/*
  * This function is the place to do per-board things such as ramp up the
  * MPU clock frequency.
  */
@@ -224,7 +237,7 @@ void s_init(void)
 	set_uart_mux_conf();
 	setup_clocks_for_console();
 	uart_soft_reset();
-#ifdef CONFIG_NOR_BOOT
+#if defined(CONFIG_NOR_BOOT) || defined(CONFIG_QSPI_BOOT)
 	gd->baudrate = CONFIG_BAUDRATE;
 	serial_init();
 	gd->have_console = 1;
@@ -232,13 +245,14 @@ void s_init(void)
 	gd = &gdata;
 	preloader_console_init();
 #endif
-	prcm_init();
-	set_mux_conf_regs();
 #if defined(CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC)
 	/* Enable RTC32K clock */
 	rtc32k_enable();
 #endif
+#ifdef CONFIG_SPL_BUILD
+	board_early_init_f();
 	sdram_init();
+#endif
 }
 #endif
 
diff --git a/arch/arm/cpu/armv7/am33xx/clock.c b/arch/arm/cpu/armv7/am33xx/clock.c
index 0672798fe0..ec7d46838b 100644
--- a/arch/arm/cpu/armv7/am33xx/clock.c
+++ b/arch/arm/cpu/armv7/am33xx/clock.c
@@ -170,8 +170,19 @@ void do_enable_clocks(u32 *const *clk_domains,
 	};
 }
 
+/*
+ * Before scaling up the clocks we need to have the PMIC scale up the
+ * voltages first.  This will be dependent on which PMIC is in use
+ * and in some cases we may not be scaling things up at all and thus not
+ * need to do anything here.
+ */
+__weak void scale_vcores(void)
+{
+}
+
 void prcm_init()
 {
 	enable_basic_clocks();
+	scale_vcores();
 	setup_dplls();
 }
diff --git a/arch/arm/cpu/armv7/am33xx/clock_am43xx.c b/arch/arm/cpu/armv7/am33xx/clock_am43xx.c
index d0bc2340c8..31188c85bc 100644
--- a/arch/arm/cpu/armv7/am33xx/clock_am43xx.c
+++ b/arch/arm/cpu/armv7/am33xx/clock_am43xx.c
@@ -53,6 +53,8 @@ const struct dpll_regs dpll_ddr_regs = {
 
 void setup_clocks_for_console(void)
 {
+	u32 clkctrl, idlest = MODULE_CLKCTRL_IDLEST_DISABLED;
+
 	/* Do not add any spl_debug prints in this function */
 	clrsetbits_le32(&cmwkup->wkclkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK,
 			CD_CLKCTRL_CLKTRCTRL_SW_WKUP <<
@@ -63,6 +65,13 @@ void setup_clocks_for_console(void)
 			MODULE_CLKCTRL_MODULEMODE_MASK,
 			MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN <<
 			MODULE_CLKCTRL_MODULEMODE_SHIFT);
+
+	while ((idlest == MODULE_CLKCTRL_IDLEST_DISABLED) ||
+		(idlest == MODULE_CLKCTRL_IDLEST_TRANSITIONING)) {
+		clkctrl = readl(&cmwkup->wkup_uart0ctrl);
+		idlest = (clkctrl & MODULE_CLKCTRL_IDLEST_MASK) >>
+			 MODULE_CLKCTRL_IDLEST_SHIFT;
+	}
 }
 
 void enable_basic_clocks(void)
diff --git a/arch/arm/cpu/armv7/am33xx/emif4.c b/arch/arm/cpu/armv7/am33xx/emif4.c
index 2c67c322ca..a7a3e88cd7 100644
--- a/arch/arm/cpu/armv7/am33xx/emif4.c
+++ b/arch/arm/cpu/armv7/am33xx/emif4.c
@@ -21,6 +21,10 @@ DECLARE_GLOBAL_DATA_PTR;
 
 int dram_init(void)
 {
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+	sdram_init();
+#endif
+
 	/* dram_init must store complete ramsize in gd->ram_size */
 	gd->ram_size = get_ram_size(
 			(void *)CONFIG_SYS_SDRAM_BASE,
diff --git a/arch/arm/cpu/armv7/exynos/clock.c b/arch/arm/cpu/armv7/exynos/clock.c
index 1fea4d6663..400d134d54 100644
--- a/arch/arm/cpu/armv7/exynos/clock.c
+++ b/arch/arm/cpu/armv7/exynos/clock.c
@@ -869,7 +869,7 @@ static void exynos4_set_mmc_clk(int dev_index, unsigned int div)
 {
 	struct exynos4_clock *clk =
 		(struct exynos4_clock *)samsung_get_base_clock();
-	unsigned int addr;
+	unsigned int addr, clear_bit, set_bit;
 
 	/*
 	 * CLK_DIV_FSYS1
@@ -877,44 +877,26 @@ static void exynos4_set_mmc_clk(int dev_index, unsigned int div)
 	 * CLK_DIV_FSYS2
 	 * MMC2_PRE_RATIO [15:8], MMC3_PRE_RATIO [31:24]
 	 * CLK_DIV_FSYS3
-	 * MMC4_PRE_RATIO [15:8]
+	 * MMC4_RATIO [3:0]
 	 */
 	if (dev_index < 2) {
 		addr = (unsigned int)&clk->div_fsys1;
-	}  else if (dev_index == 4) {
+		clear_bit = MASK_PRE_RATIO(dev_index);
+		set_bit = SET_PRE_RATIO(dev_index, div);
+	} else if (dev_index == 4) {
 		addr = (unsigned int)&clk->div_fsys3;
 		dev_index -= 4;
+		/* MMC4 is controlled with the MMC4_RATIO value */
+		clear_bit = MASK_RATIO(dev_index);
+		set_bit = SET_RATIO(dev_index, div);
 	} else {
 		addr = (unsigned int)&clk->div_fsys2;
 		dev_index -= 2;
+		clear_bit = MASK_PRE_RATIO(dev_index);
+		set_bit = SET_PRE_RATIO(dev_index, div);
 	}
 
-	clrsetbits_le32(addr, 0xff << ((dev_index << 4) + 8),
-			(div & 0xff) << ((dev_index << 4) + 8));
-}
-
-/* exynos4x12: set the mmc clock */
-static void exynos4x12_set_mmc_clk(int dev_index, unsigned int div)
-{
-	struct exynos4x12_clock *clk =
-		(struct exynos4x12_clock *)samsung_get_base_clock();
-	unsigned int addr;
-
-	/*
-	 * CLK_DIV_FSYS1
-	 * MMC0_PRE_RATIO [15:8], MMC1_PRE_RATIO [31:24]
-	 * CLK_DIV_FSYS2
-	 * MMC2_PRE_RATIO [15:8], MMC3_PRE_RATIO [31:24]
-	 */
-	if (dev_index < 2) {
-		addr = (unsigned int)&clk->div_fsys1;
-	} else {
-		addr = (unsigned int)&clk->div_fsys2;
-		dev_index -= 2;
-	}
-
-	clrsetbits_le32(addr, 0xff << ((dev_index << 4) + 8),
-			(div & 0xff) << ((dev_index << 4) + 8));
+	clrsetbits_le32(addr, clear_bit, set_bit);
 }
 
 /* exynos5: set the mmc clock */
@@ -1612,10 +1594,7 @@ void set_mmc_clk(int dev_index, unsigned int div)
 		else
 			exynos5_set_mmc_clk(dev_index, div);
 	} else {
-		if (proid_is_exynos4412())
-			exynos4x12_set_mmc_clk(dev_index, div);
-		else
-			exynos4_set_mmc_clk(dev_index, div);
+		exynos4_set_mmc_clk(dev_index, div);
 	}
 }
 
diff --git a/arch/arm/cpu/armv7/exynos/lowlevel_init.c b/arch/arm/cpu/armv7/exynos/lowlevel_init.c
index 11fe5b8d04..dcc270ffe4 100644
--- a/arch/arm/cpu/armv7/exynos/lowlevel_init.c
+++ b/arch/arm/cpu/armv7/exynos/lowlevel_init.c
@@ -39,6 +39,7 @@ enum {
 	DO_CLOCKS	= 1 << 1,
 	DO_MEM_RESET	= 1 << 2,
 	DO_UART		= 1 << 3,
+	DO_POWER	= 1 << 4,
 };
 
 int do_lowlevel_init(void)
@@ -48,6 +49,8 @@ int do_lowlevel_init(void)
 
 	arch_cpu_init();
 
+	set_ps_hold_ctrl();
+
 	reset_status = get_reset_status();
 
 	switch (reset_status) {
@@ -60,9 +63,12 @@ int do_lowlevel_init(void)
 		break;
 	default:
 		/* This is a normal boot (not a wake from sleep) */
-		actions = DO_CLOCKS | DO_MEM_RESET;
+		actions = DO_CLOCKS | DO_MEM_RESET | DO_POWER;
 	}
 
+	if (actions & DO_POWER)
+		set_ps_hold_ctrl();
+
 	if (actions & DO_CLOCKS) {
 		system_clock_init();
 		mem_ctrl_init(actions & DO_MEM_RESET);
diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c b/arch/arm/cpu/armv7/exynos/pinmux.c
index ee7c2e5a4b..86a0c75326 100644
--- a/arch/arm/cpu/armv7/exynos/pinmux.c
+++ b/arch/arm/cpu/armv7/exynos/pinmux.c
@@ -573,15 +573,26 @@ static void exynos4_i2c_config(int peripheral, int flags)
 static int exynos4_mmc_config(int peripheral, int flags)
 {
 	int i, start = 0, start_ext = 0;
+	unsigned int func, ext_func;
 
 	switch (peripheral) {
 	case PERIPH_ID_SDMMC0:
 		start = EXYNOS4_GPIO_K00;
 		start_ext = EXYNOS4_GPIO_K13;
+		func = S5P_GPIO_FUNC(0x2);
+		ext_func = S5P_GPIO_FUNC(0x3);
 		break;
 	case PERIPH_ID_SDMMC2:
 		start = EXYNOS4_GPIO_K20;
 		start_ext = EXYNOS4_GPIO_K33;
+		func = S5P_GPIO_FUNC(0x2);
+		ext_func = S5P_GPIO_FUNC(0x3);
+		break;
+	case PERIPH_ID_SDMMC4:
+		start = EXYNOS4_GPIO_K00;
+		start_ext = EXYNOS4_GPIO_K13;
+		func = S5P_GPIO_FUNC(0x3);
+		ext_func = S5P_GPIO_FUNC(0x4);
 		break;
 	default:
 		return -1;
@@ -589,13 +600,14 @@ static int exynos4_mmc_config(int peripheral, int flags)
 	for (i = start; i < (start + 7); i++) {
 		if (i == (start + 2))
 			continue;
-		gpio_cfg_pin(i,  S5P_GPIO_FUNC(0x2));
+		gpio_cfg_pin(i,  func);
 		gpio_set_pull(i, S5P_GPIO_PULL_NONE);
 		gpio_set_drv(i, S5P_GPIO_DRV_4X);
 	}
+	/* SDMMC2 do not use 8bit mode at exynos4 */
 	if (flags & PINMUX_FLAG_8BIT_MODE) {
 		for (i = start_ext; i < (start_ext + 4); i++) {
-			gpio_cfg_pin(i,  S5P_GPIO_FUNC(0x3));
+			gpio_cfg_pin(i,  ext_func);
 			gpio_set_pull(i, S5P_GPIO_PULL_NONE);
 			gpio_set_drv(i, S5P_GPIO_DRV_4X);
 		}
@@ -676,15 +688,26 @@ static void exynos4x12_i2c_config(int peripheral, int flags)
 static int exynos4x12_mmc_config(int peripheral, int flags)
 {
 	int i, start = 0, start_ext = 0;
+	unsigned int func, ext_func;
 
 	switch (peripheral) {
 	case PERIPH_ID_SDMMC0:
 		start = EXYNOS4X12_GPIO_K00;
 		start_ext = EXYNOS4X12_GPIO_K13;
+		func = S5P_GPIO_FUNC(0x2);
+		ext_func = S5P_GPIO_FUNC(0x3);
 		break;
 	case PERIPH_ID_SDMMC2:
 		start = EXYNOS4X12_GPIO_K20;
 		start_ext = EXYNOS4X12_GPIO_K33;
+		func = S5P_GPIO_FUNC(0x2);
+		ext_func = S5P_GPIO_FUNC(0x3);
+		break;
+	case PERIPH_ID_SDMMC4:
+		start = EXYNOS4_GPIO_K00;
+		start_ext = EXYNOS4_GPIO_K13;
+		func = S5P_GPIO_FUNC(0x3);
+		ext_func = S5P_GPIO_FUNC(0x4);
 		break;
 	default:
 		return -1;
@@ -692,13 +715,13 @@ static int exynos4x12_mmc_config(int peripheral, int flags)
 	for (i = start; i < (start + 7); i++) {
 		if (i == (start + 2))
 			continue;
-		gpio_cfg_pin(i,  S5P_GPIO_FUNC(0x2));
+		gpio_cfg_pin(i,  func);
 		gpio_set_pull(i, S5P_GPIO_PULL_NONE);
 		gpio_set_drv(i, S5P_GPIO_DRV_4X);
 	}
 	if (flags & PINMUX_FLAG_8BIT_MODE) {
 		for (i = start_ext; i < (start_ext + 4); i++) {
-			gpio_cfg_pin(i,  S5P_GPIO_FUNC(0x3));
+			gpio_cfg_pin(i,  ext_func);
 			gpio_set_pull(i, S5P_GPIO_PULL_NONE);
 			gpio_set_drv(i, S5P_GPIO_DRV_4X);
 		}
@@ -759,10 +782,10 @@ static int exynos4_pinmux_config(int peripheral, int flags)
 		break;
 	case PERIPH_ID_SDMMC0:
 	case PERIPH_ID_SDMMC2:
+	case PERIPH_ID_SDMMC4:
 		return exynos4_mmc_config(peripheral, flags);
 	case PERIPH_ID_SDMMC1:
 	case PERIPH_ID_SDMMC3:
-	case PERIPH_ID_SDMMC4:
 		debug("SDMMC device %d not implemented\n", peripheral);
 		return -1;
 	default:
@@ -794,10 +817,10 @@ static int exynos4x12_pinmux_config(int peripheral, int flags)
 		break;
 	case PERIPH_ID_SDMMC0:
 	case PERIPH_ID_SDMMC2:
+	case PERIPH_ID_SDMMC4:
 		return exynos4x12_mmc_config(peripheral, flags);
 	case PERIPH_ID_SDMMC1:
 	case PERIPH_ID_SDMMC3:
-	case PERIPH_ID_SDMMC4:
 		debug("SDMMC device %d not implemented\n", peripheral);
 		return -1;
 	default:
diff --git a/arch/arm/cpu/armv7/exynos/power.c b/arch/arm/cpu/armv7/exynos/power.c
index 563abd750f..638ee0b30b 100644
--- a/arch/arm/cpu/armv7/exynos/power.c
+++ b/arch/arm/cpu/armv7/exynos/power.c
@@ -112,6 +112,12 @@ static void exynos5_set_ps_hold_ctrl(void)
 			EXYNOS_PS_HOLD_CONTROL_DATA_HIGH);
 }
 
+/*
+ * Set ps_hold data driving value high
+ * This enables the machine to stay powered on
+ * after the initial power-on condition goes away
+ * (e.g. power button).
+ */
 void set_ps_hold_ctrl(void)
 {
 	if (cpu_is_exynos5())
diff --git a/arch/arm/cpu/armv7/keystone/init.c b/arch/arm/cpu/armv7/keystone/init.c
index 044015aed6..4df5ae1cae 100644
--- a/arch/arm/cpu/armv7/keystone/init.c
+++ b/arch/arm/cpu/armv7/keystone/init.c
@@ -8,6 +8,7 @@
  */
 
 #include <common.h>
+#include <ns16550.h>
 #include <asm/io.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/hardware.h>
@@ -30,6 +31,14 @@ int arch_cpu_init(void)
 	share_all_segments(11); /* PCIE */
 #endif
 
+	/*
+	 * just initialise the COM2 port so that TI specific
+	 * UART register PWREMU_MGMT is initialized. Linux UART
+	 * driver doesn't handle this.
+	 */
+	NS16550_init((NS16550_t)(CONFIG_SYS_NS16550_COM2),
+		     CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE);
+
 	return 0;
 }
 
diff --git a/arch/arm/cpu/armv7/omap3/mem.c b/arch/arm/cpu/armv7/omap3/mem.c
index e649409654..1832affa5b 100644
--- a/arch/arm/cpu/armv7/omap3/mem.c
+++ b/arch/arm/cpu/armv7/omap3/mem.c
@@ -21,17 +21,6 @@
 struct gpmc *gpmc_cfg;
 
 #if defined(CONFIG_CMD_NAND)
-#if defined(GPMC_NAND_ECC_SP_x8_LAYOUT) || defined(GPMC_NAND_ECC_LP_x8_LAYOUT)
-static const u32 gpmc_m_nand[GPMC_MAX_REG] = {
-	SMNAND_GPMC_CONFIG1,
-	SMNAND_GPMC_CONFIG2,
-	SMNAND_GPMC_CONFIG3,
-	SMNAND_GPMC_CONFIG4,
-	SMNAND_GPMC_CONFIG5,
-	SMNAND_GPMC_CONFIG6,
-	0,
-};
-#else
 static const u32 gpmc_m_nand[GPMC_MAX_REG] = {
 	M_NAND_GPMC_CONFIG1,
 	M_NAND_GPMC_CONFIG2,
@@ -40,7 +29,6 @@ static const u32 gpmc_m_nand[GPMC_MAX_REG] = {
 	M_NAND_GPMC_CONFIG5,
 	M_NAND_GPMC_CONFIG6, 0
 };
-#endif
 #endif /* CONFIG_CMD_NAND */
 
 #if defined(CONFIG_CMD_ONENAND)