Tegra: Move common clock code to arch/arm/cpu/tegra-common/clock.c

This 'commonizes' much of the clock/pll code. SoC-dependent code
and tables are left in arch/cpu/tegraXXX-common/clock.c

Some T30 tables needed whitespace fixes due to checkpatch complaints.

Signed-off-by: Tom Warren <twarren@nvidia.com>

1 files changed, 114 insertions, 598 deletions

diff --git a/arch/arm/cpu/tegra30-common/clock.c b/arch/arm/cpu/tegra30-common/clock.c
index c67a2e1b61..ee3c8b10aa 100644
--- a/arch/arm/cpu/tegra30-common/clock.c
+++ b/arch/arm/cpu/tegra30-common/clock.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2010-2012, NVIDIA CORPORATION.  All rights reserved.
+ * Copyright (c) 2010-2013, NVIDIA CORPORATION.  All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -26,25 +26,7 @@
 #include <fdtdec.h>
 
 /*
- * This is our record of the current clock rate of each clock. We don't
- * fill all of these in since we are only really interested in clocks which
- * we use as parents.
- */
-static unsigned pll_rate[CLOCK_ID_COUNT];
-
-/*
- * The oscillator frequency is fixed to one of four set values. Based on this
- * the other clocks are set up appropriately.
- */
-static unsigned osc_freq[CLOCK_OSC_FREQ_COUNT] = {
-	13000000,
-	19200000,
-	12000000,
-	26000000,
-};
-
-/*
- * Clock types that we can use as a source. The Tegra3 has muxes for the
+ * Clock types that we can use as a source. The Tegra30 has muxes for the
  * peripheral clocks, and in most cases there are four options for the clock
  * source. This gives us a clock 'type' and exploits what commonality exists
  * in the device.
@@ -71,21 +53,15 @@ enum clock_type_id {
 	CLOCK_TYPE_PCST,
 
 	CLOCK_TYPE_COUNT,
-	CLOCK_TYPE_NONE = -1,	/* invalid clock type */
+	CLOCK_TYPE_NONE = -1,   /* invalid clock type */
 };
 
-/* return 1 if a peripheral ID is in range */
-#define clock_type_id_isvalid(id) ((id) >= 0 && \
-		(id) < CLOCK_TYPE_COUNT)
-
-char pllp_valid = 1;	/* PLLP is set up correctly */
-
 enum {
-	CLOCK_MAX_MUX	= 8	/* number of source options for each clock */
+	CLOCK_MAX_MUX   = 8     /* number of source options for each clock */
 };
 
 enum {
-	MASK_BITS_31_30	= 2,	/* num of bits used to specify clock source */
+	MASK_BITS_31_30 = 2,    /* num of bits used to specify clock source */
 	MASK_BITS_31_29,
 	MASK_BITS_29_28,
 };
@@ -100,45 +76,41 @@ enum {
  */
 #define CLK(x) CLOCK_ID_ ## x
 static enum clock_id clock_source[CLOCK_TYPE_COUNT][CLOCK_MAX_MUX+1] = {
-	{ CLK(AUDIO),	CLK(XCPU),	CLK(PERIPH),	CLK(OSC),
-		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+	{ CLK(AUDIO),   CLK(XCPU),      CLK(PERIPH),    CLK(OSC),
+		CLK(NONE),      CLK(NONE),      CLK(NONE),      CLK(NONE),
 		MASK_BITS_31_30},
-	{ CLK(MEMORY),	CLK(CGENERAL),	CLK(PERIPH),	CLK(AUDIO),
-		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+	{ CLK(MEMORY),  CLK(CGENERAL),  CLK(PERIPH),    CLK(AUDIO),
+		CLK(NONE),      CLK(NONE),      CLK(NONE),      CLK(NONE),
 		MASK_BITS_31_30},
-	{ CLK(MEMORY),	CLK(CGENERAL),	CLK(PERIPH),	CLK(OSC),
-		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+	{ CLK(MEMORY),  CLK(CGENERAL),  CLK(PERIPH),    CLK(OSC),
+		CLK(NONE),      CLK(NONE),      CLK(NONE),      CLK(NONE),
 		MASK_BITS_31_30},
-	{ CLK(PERIPH),	CLK(CGENERAL),	CLK(MEMORY),	CLK(NONE),
-		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+	{ CLK(PERIPH),  CLK(CGENERAL),  CLK(MEMORY),    CLK(NONE),
+		CLK(NONE),      CLK(NONE),      CLK(NONE),      CLK(NONE),
 		MASK_BITS_31_30},
-	{ CLK(PERIPH),	CLK(CGENERAL),	CLK(MEMORY),	CLK(OSC),
-		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+	{ CLK(PERIPH),  CLK(CGENERAL),  CLK(MEMORY),    CLK(OSC),
+		CLK(NONE),      CLK(NONE),      CLK(NONE),      CLK(NONE),
 		MASK_BITS_31_30},
-	{ CLK(PERIPH),	CLK(CGENERAL),	CLK(MEMORY),	CLK(OSC),
-		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+	{ CLK(PERIPH),  CLK(CGENERAL),  CLK(MEMORY),    CLK(OSC),
+		CLK(NONE),      CLK(NONE),      CLK(NONE),      CLK(NONE),
 		MASK_BITS_31_30},
-	{ CLK(PERIPH),	CLK(DISPLAY),	CLK(CGENERAL),	CLK(OSC),
-		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+	{ CLK(PERIPH),  CLK(DISPLAY),   CLK(CGENERAL),  CLK(OSC),
+		CLK(NONE),      CLK(NONE),      CLK(NONE),      CLK(NONE),
 		MASK_BITS_31_30},
-	{ CLK(AUDIO),	CLK(CGENERAL),	CLK(PERIPH),	CLK(OSC),
-		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+	{ CLK(AUDIO),   CLK(CGENERAL),  CLK(PERIPH),    CLK(OSC),
+		CLK(NONE),      CLK(NONE),      CLK(NONE),      CLK(NONE),
 		MASK_BITS_31_30},
-	{ CLK(AUDIO),	CLK(SFROM32KHZ),	CLK(PERIPH),	CLK(OSC),
-		CLK(EPCI),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+	{ CLK(AUDIO),   CLK(SFROM32KHZ),	CLK(PERIPH),   CLK(OSC),
+		CLK(EPCI),      CLK(NONE),      CLK(NONE),      CLK(NONE),
 		MASK_BITS_31_29},
-	{ CLK(PERIPH),	CLK(MEMORY),	CLK(DISPLAY),	CLK(AUDIO),
-		CLK(CGENERAL),	CLK(DISPLAY2),	CLK(OSC),	CLK(NONE),
+	{ CLK(PERIPH),  CLK(MEMORY),    CLK(DISPLAY),   CLK(AUDIO),
+		CLK(CGENERAL),  CLK(DISPLAY2),  CLK(OSC),       CLK(NONE),
 		MASK_BITS_31_29},
-	{ CLK(PERIPH),	CLK(CGENERAL),	CLK(SFROM32KHZ),	CLK(OSC),
-		CLK(NONE),	CLK(NONE),	CLK(NONE),	CLK(NONE),
+	{ CLK(PERIPH),  CLK(CGENERAL),  CLK(SFROM32KHZ), CLK(OSC),
+		CLK(NONE),      CLK(NONE),      CLK(NONE),      CLK(NONE),
 		MASK_BITS_29_28}
 };
 
-/* return 1 if a periphc_internal_id is in range */
-#define periphc_internal_id_isvalid(id) ((id) >= 0 && \
-		(id) < PERIPHC_COUNT)
-
 /*
  * Clock type for each peripheral clock source. We put the name in each
  * record just so it is easy to match things up
@@ -147,30 +119,30 @@ static enum clock_id clock_source[CLOCK_TYPE_COUNT][CLOCK_MAX_MUX+1] = {
 static enum clock_type_id clock_periph_type[PERIPHC_COUNT] = {
 	/* 0x00 */
 	TYPE(PERIPHC_I2S1,	CLOCK_TYPE_AXPT),
-	TYPE(PERIPHC_I2S2,	CLOCK_TYPE_AXPT),
-	TYPE(PERIPHC_SPDIF_OUT,	CLOCK_TYPE_AXPT),
-	TYPE(PERIPHC_SPDIF_IN,	CLOCK_TYPE_PCM),
-	TYPE(PERIPHC_PWM,	CLOCK_TYPE_PCST),  /* only PWM uses b29:28 */
-	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
-	TYPE(PERIPHC_SBC2,	CLOCK_TYPE_PCMT),
-	TYPE(PERIPHC_SBC3,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_I2S2,      CLOCK_TYPE_AXPT),
+	TYPE(PERIPHC_SPDIF_OUT, CLOCK_TYPE_AXPT),
+	TYPE(PERIPHC_SPDIF_IN,  CLOCK_TYPE_PCM),
+	TYPE(PERIPHC_PWM,       CLOCK_TYPE_PCST),  /* only PWM uses b29:28 */
+	TYPE(PERIPHC_NONE,      CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_SBC2,      CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_SBC3,      CLOCK_TYPE_PCMT),
 
 	/* 0x08 */
-	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
-	TYPE(PERIPHC_I2C1,	CLOCK_TYPE_PCMT16),
-	TYPE(PERIPHC_DVC_I2C,	CLOCK_TYPE_PCMT16),
-	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
-	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
-	TYPE(PERIPHC_SBC1,	CLOCK_TYPE_PCMT),
-	TYPE(PERIPHC_DISP1,	CLOCK_TYPE_PMDACD2T),
-	TYPE(PERIPHC_DISP2,	CLOCK_TYPE_PMDACD2T),
+	TYPE(PERIPHC_NONE,      CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_I2C1,      CLOCK_TYPE_PCMT16),
+	TYPE(PERIPHC_DVC_I2C,   CLOCK_TYPE_PCMT16),
+	TYPE(PERIPHC_NONE,      CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_NONE,      CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_SBC1,      CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_DISP1,     CLOCK_TYPE_PMDACD2T),
+	TYPE(PERIPHC_DISP2,     CLOCK_TYPE_PMDACD2T),
 
 	/* 0x10 */
-	TYPE(PERIPHC_CVE,	CLOCK_TYPE_PDCT),
-	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_CVE,       CLOCK_TYPE_PDCT),
+	TYPE(PERIPHC_NONE,      CLOCK_TYPE_NONE),
 	TYPE(PERIPHC_VI,	CLOCK_TYPE_MCPA),
-	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
-	TYPE(PERIPHC_SDMMC1,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_NONE,      CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_SDMMC1,    CLOCK_TYPE_PCMT),
 	TYPE(PERIPHC_SDMMC2,	CLOCK_TYPE_PCMT),
 	TYPE(PERIPHC_G3D,	CLOCK_TYPE_MCPA),
 	TYPE(PERIPHC_G2D,	CLOCK_TYPE_MCPA),
@@ -178,81 +150,81 @@ static enum clock_type_id clock_periph_type[PERIPHC_COUNT] = {
 	/* 0x18 */
 	TYPE(PERIPHC_NDFLASH,	CLOCK_TYPE_PCMT),
 	TYPE(PERIPHC_SDMMC4,	CLOCK_TYPE_PCMT),
-	TYPE(PERIPHC_VFIR,	CLOCK_TYPE_PCMT),
-	TYPE(PERIPHC_EPP,	CLOCK_TYPE_MCPA),
-	TYPE(PERIPHC_MPE,	CLOCK_TYPE_MCPA),
-	TYPE(PERIPHC_MIPI,	CLOCK_TYPE_PCMT),	/* MIPI base-band HSI */
-	TYPE(PERIPHC_UART1,	CLOCK_TYPE_PCMT),
-	TYPE(PERIPHC_UART2,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_VFIR,      CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_EPP,       CLOCK_TYPE_MCPA),
+	TYPE(PERIPHC_MPE,       CLOCK_TYPE_MCPA),
+	TYPE(PERIPHC_MIPI,      CLOCK_TYPE_PCMT),       /* MIPI base-band HSI */
+	TYPE(PERIPHC_UART1,     CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_UART2,     CLOCK_TYPE_PCMT),
 
 	/* 0x20 */
-	TYPE(PERIPHC_HOST1X,	CLOCK_TYPE_MCPA),
-	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
-	TYPE(PERIPHC_TVO,	CLOCK_TYPE_PDCT),
-	TYPE(PERIPHC_HDMI,	CLOCK_TYPE_PMDACD2T),
-	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
-	TYPE(PERIPHC_TVDAC,	CLOCK_TYPE_PDCT),
-	TYPE(PERIPHC_I2C2,	CLOCK_TYPE_PCMT16),
+	TYPE(PERIPHC_HOST1X,    CLOCK_TYPE_MCPA),
+	TYPE(PERIPHC_NONE,      CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_TVO,       CLOCK_TYPE_PDCT),
+	TYPE(PERIPHC_HDMI,      CLOCK_TYPE_PMDACD2T),
+	TYPE(PERIPHC_NONE,      CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_TVDAC,     CLOCK_TYPE_PDCT),
+	TYPE(PERIPHC_I2C2,      CLOCK_TYPE_PCMT16),
 	TYPE(PERIPHC_EMC,	CLOCK_TYPE_MCPT),
 
 	/* 0x28 */
 	TYPE(PERIPHC_UART3,	CLOCK_TYPE_PCMT),
 	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
 	TYPE(PERIPHC_VI,	CLOCK_TYPE_MCPA),
-	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
-	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
-	TYPE(PERIPHC_SBC4,	CLOCK_TYPE_PCMT),
-	TYPE(PERIPHC_I2C3,	CLOCK_TYPE_PCMT16),
-	TYPE(PERIPHC_SDMMC3,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_NONE,      CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_NONE,      CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_SBC4,      CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_I2C3,      CLOCK_TYPE_PCMT16),
+	TYPE(PERIPHC_SDMMC3,    CLOCK_TYPE_PCMT),
 
 	/* 0x30 */
 	TYPE(PERIPHC_UART4,	CLOCK_TYPE_PCMT),
 	TYPE(PERIPHC_UART5,	CLOCK_TYPE_PCMT),
 	TYPE(PERIPHC_VDE,	CLOCK_TYPE_PCMT),
-	TYPE(PERIPHC_OWR,	CLOCK_TYPE_PCMT),
-	TYPE(PERIPHC_NOR,	CLOCK_TYPE_PCMT),
-	TYPE(PERIPHC_CSITE,	CLOCK_TYPE_PCMT),
-	TYPE(PERIPHC_I2S0,	CLOCK_TYPE_AXPT),
-	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
-
-	/* 0x38h */		/* Jumps to reg offset 0x3B0h - new for T30 */
-	TYPE(PERIPHC_G3D2,	CLOCK_TYPE_MCPA),
-	TYPE(PERIPHC_MSELECT,	CLOCK_TYPE_PCMT),
-	TYPE(PERIPHC_TSENSOR,	CLOCK_TYPE_PCST),	/* s/b PCTS */
-	TYPE(PERIPHC_I2S3,	CLOCK_TYPE_AXPT),
-	TYPE(PERIPHC_I2S4,	CLOCK_TYPE_AXPT),
-	TYPE(PERIPHC_I2C4,	CLOCK_TYPE_PCMT16),
-	TYPE(PERIPHC_SBC5,	CLOCK_TYPE_PCMT),
-	TYPE(PERIPHC_SBC6,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_OWR,       CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_NOR,       CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_CSITE,     CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_I2S0,      CLOCK_TYPE_AXPT),
+	TYPE(PERIPHC_NONE,      CLOCK_TYPE_NONE),
+
+	/* 0x38h */	     /* Jumps to reg offset 0x3B0h - new for T30 */
+	TYPE(PERIPHC_G3D2,      CLOCK_TYPE_MCPA),
+	TYPE(PERIPHC_MSELECT,   CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_TSENSOR,   CLOCK_TYPE_PCST),       /* s/b PCTS */
+	TYPE(PERIPHC_I2S3,      CLOCK_TYPE_AXPT),
+	TYPE(PERIPHC_I2S4,      CLOCK_TYPE_AXPT),
+	TYPE(PERIPHC_I2C4,      CLOCK_TYPE_PCMT16),
+	TYPE(PERIPHC_SBC5,      CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_SBC6,      CLOCK_TYPE_PCMT),
 
 	/* 0x40 */
-	TYPE(PERIPHC_AUDIO,	CLOCK_TYPE_ACPT),
-	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
-	TYPE(PERIPHC_DAM0,	CLOCK_TYPE_ACPT),
-	TYPE(PERIPHC_DAM1,	CLOCK_TYPE_ACPT),
-	TYPE(PERIPHC_DAM2,	CLOCK_TYPE_ACPT),
+	TYPE(PERIPHC_AUDIO,     CLOCK_TYPE_ACPT),
+	TYPE(PERIPHC_NONE,      CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_DAM0,      CLOCK_TYPE_ACPT),
+	TYPE(PERIPHC_DAM1,      CLOCK_TYPE_ACPT),
+	TYPE(PERIPHC_DAM2,      CLOCK_TYPE_ACPT),
 	TYPE(PERIPHC_HDA2CODEC2X, CLOCK_TYPE_PCMT),
-	TYPE(PERIPHC_ACTMON,	CLOCK_TYPE_PCST),	/* MASK 31:30 */
+	TYPE(PERIPHC_ACTMON,    CLOCK_TYPE_PCST),       /* MASK 31:30 */
 	TYPE(PERIPHC_EXTPERIPH1, CLOCK_TYPE_ASPTE),
 
 	/* 0x48 */
 	TYPE(PERIPHC_EXTPERIPH2, CLOCK_TYPE_ASPTE),
 	TYPE(PERIPHC_EXTPERIPH3, CLOCK_TYPE_ASPTE),
-	TYPE(PERIPHC_NANDSPEED,	CLOCK_TYPE_PCMT),
-	TYPE(PERIPHC_I2CSLOW,	CLOCK_TYPE_PCST),	/* MASK 31:30 */
-	TYPE(PERIPHC_SYS,	CLOCK_TYPE_NONE),
-	TYPE(PERIPHC_SPEEDO,	CLOCK_TYPE_PCMT),
-	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
-	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_NANDSPEED, CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_I2CSLOW,   CLOCK_TYPE_PCST),       /* MASK 31:30 */
+	TYPE(PERIPHC_SYS,       CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_SPEEDO,    CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_NONE,      CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_NONE,      CLOCK_TYPE_NONE),
 
 	/* 0x50 */
-	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
-	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
-	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
-	TYPE(PERIPHC_NONE,	CLOCK_TYPE_NONE),
-	TYPE(PERIPHC_SATAOOB,	CLOCK_TYPE_PCMT),	/* offset 0x420h */
-	TYPE(PERIPHC_SATA,	CLOCK_TYPE_PCMT),
-	TYPE(PERIPHC_HDA,	CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_NONE,      CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_NONE,      CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_NONE,      CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_NONE,      CLOCK_TYPE_NONE),
+	TYPE(PERIPHC_SATAOOB,   CLOCK_TYPE_PCMT),       /* offset 0x420h */
+	TYPE(PERIPHC_SATA,      CLOCK_TYPE_PCMT),
+	TYPE(PERIPHC_HDA,       CLOCK_TYPE_PCMT),
 };
 
 /*
@@ -274,12 +246,12 @@ static s8 periph_id_to_internal_id[PERIPH_ID_COUNT] = {
 	NONE(RESERVED4),
 	NONE(TMR),
 	PERIPHC_UART1,
-	PERIPHC_UART2,	/* and vfir 0x68 */
+	PERIPHC_UART2,  /* and vfir 0x68 */
 
 	/* 8 */
 	NONE(GPIO),
 	PERIPHC_SDMMC2,
-	NONE(SPDIF),		/* 0x08 and 0x0c, unclear which to use */
+	NONE(SPDIF),	    /* 0x08 and 0x0c, unclear which to use */
 	PERIPHC_I2S1,
 	PERIPHC_I2C1,
 	PERIPHC_NDFLASH,
@@ -318,7 +290,7 @@ static s8 periph_id_to_internal_id[PERIPH_ID_COUNT] = {
 
 	/* 40 */
 	NONE(KFUSE),
-	NONE(SBC1),	/* SBC1, 0x34, is this SPI1? */
+	NONE(SBC1),     /* SBC1, 0x34, is this SPI1? */
 	PERIPHC_NOR,
 	NONE(RESERVED43),
 	PERIPHC_SBC2,
@@ -328,7 +300,7 @@ static s8 periph_id_to_internal_id[PERIPH_ID_COUNT] = {
 
 	/* 48 */
 	NONE(DSI),
-	PERIPHC_TVO,	/* also CVE 0x40 */
+	PERIPHC_TVO,    /* also CVE 0x40 */
 	PERIPHC_MIPI,
 	PERIPHC_HDMI,
 	NONE(CSI),
@@ -449,7 +421,8 @@ static s8 periph_id_to_internal_id[PERIPH_ID_COUNT] = {
 
 /*
  * Get the oscillator frequency, from the corresponding hardware configuration
- * field.
+ * field. Note that T30 supports 3 new higher freqs, but we map back
+ * to the old T20 freqs. Support for the higher oscillators is TBD.
  */
 enum clock_osc_freq clock_get_osc_freq(void)
 {
@@ -458,84 +431,19 @@ enum clock_osc_freq clock_get_osc_freq(void)
 	u32 reg;
 
 	reg = readl(&clkrst->crc_osc_ctrl);
-	return (reg & OSC_FREQ_MASK) >> OSC_FREQ_SHIFT;
-}
+	reg = (reg & OSC_FREQ_MASK) >> OSC_FREQ_SHIFT;
 
-int clock_get_osc_bypass(void)
-{
-	struct clk_rst_ctlr *clkrst =
-			(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
-	u32 reg;
+	if (reg & 1)			/* one of the newer freqs */
+		printf("Warning: OSC_FREQ is unsupported! (%d)\n", reg);
 
-	reg = readl(&clkrst->crc_osc_ctrl);
-	return (reg & OSC_XOBP_MASK) >> OSC_XOBP_SHIFT;
-}
-
-/* Returns a pointer to the registers of the given pll */
-static struct clk_pll *get_pll(enum clock_id clkid)
-{
-	struct clk_rst_ctlr *clkrst =
-			(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
-
-	assert(clock_id_is_pll(clkid));
-	return &clkrst->crc_pll[clkid];
-}
-
-int clock_ll_read_pll(enum clock_id clkid, u32 *divm, u32 *divn,
-		u32 *divp, u32 *cpcon, u32 *lfcon)
-{
-	struct clk_pll *pll = get_pll(clkid);
-	u32 data;
-
-	assert(clkid != CLOCK_ID_USB);
-
-	/* Safety check, adds to code size but is small */
-	if (!clock_id_is_pll(clkid) || clkid == CLOCK_ID_USB)
-		return -1;
-	data = readl(&pll->pll_base);
-	*divm = (data & PLL_DIVM_MASK) >> PLL_DIVM_SHIFT;
-	*divn = (data & PLL_DIVN_MASK) >> PLL_DIVN_SHIFT;
-	*divp = (data & PLL_DIVP_MASK) >> PLL_DIVP_SHIFT;
-	data = readl(&pll->pll_misc);
-	*cpcon = (data & PLL_CPCON_MASK) >> PLL_CPCON_SHIFT;
-	*lfcon = (data & PLL_LFCON_MASK) >> PLL_LFCON_SHIFT;
-	return 0;
-}
-
-unsigned long clock_start_pll(enum clock_id clkid, u32 divm, u32 divn,
-		u32 divp, u32 cpcon, u32 lfcon)
-{
-	struct clk_pll *pll = get_pll(clkid);
-	u32 data;
-
-	/*
-	 * We cheat by treating all PLL (except PLLU) in the same fashion.
-	 * This works only because:
-	 * - same fields are always mapped at same offsets, except DCCON
-	 * - DCCON is always 0, doesn't conflict
-	 * - M,N, P of PLLP values are ignored for PLLP
-	 */
-	data = (cpcon << PLL_CPCON_SHIFT) | (lfcon << PLL_LFCON_SHIFT);
-	writel(data, &pll->pll_misc);
-
-	data = (divm << PLL_DIVM_SHIFT) | (divn << PLL_DIVN_SHIFT) |
-			(0 << PLL_BYPASS_SHIFT) | (1 << PLL_ENABLE_SHIFT);
-
-	if (clkid == CLOCK_ID_USB)
-		data |= divp << PLLU_VCO_FREQ_SHIFT;
-	else
-		data |= divp << PLL_DIVP_SHIFT;
-	writel(data, &pll->pll_base);
-
-	/* calculate the stable time */
-	return timer_get_us() + CLOCK_PLL_STABLE_DELAY_US;
+	return reg >> 2;	/* Map to most common (T20) freqs */
 }
 
 /* Returns a pointer to the clock source register for a peripheral */
-static u32 *get_periph_source_reg(enum periph_id periph_id)
+u32 *get_periph_source_reg(enum periph_id periph_id)
 {
 	struct clk_rst_ctlr *clkrst =
-			(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+		(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
 	enum periphc_internal_id internal_id;
 
 	/* Coresight is a special case */
@@ -552,126 +460,6 @@ static u32 *get_periph_source_reg(enum periph_id periph_id)
 		return &clkrst->crc_clk_src[internal_id];
 }
 
-void clock_ll_set_source_divisor(enum periph_id periph_id, unsigned source,
-			      unsigned divisor)
-{
-	u32 *reg = get_periph_source_reg(periph_id);
-	u32 value;
-
-	value = readl(reg);
-
-	value &= ~OUT_CLK_SOURCE_MASK;
-	value |= source << OUT_CLK_SOURCE_SHIFT;
-
-	value &= ~OUT_CLK_DIVISOR_MASK;
-	value |= divisor << OUT_CLK_DIVISOR_SHIFT;
-
-	writel(value, reg);
-}
-
-void clock_ll_set_source(enum periph_id periph_id, unsigned source)
-{
-	u32 *reg = get_periph_source_reg(periph_id);
-
-	clrsetbits_le32(reg, OUT_CLK_SOURCE_MASK,
-			source << OUT_CLK_SOURCE_SHIFT);
-}
-
-/**
- * Given the parent's rate and the required rate for the children, this works
- * out the peripheral clock divider to use, in 7.1 binary format.
- *
- * @param divider_bits	number of divider bits (8 or 16)
- * @param parent_rate	clock rate of parent clock in Hz
- * @param rate		required clock rate for this clock
- * @return divider which should be used
- */
-static int clk_get_divider(unsigned divider_bits, unsigned long parent_rate,
-			   unsigned long rate)
-{
-	u64 divider = parent_rate * 2;
-	unsigned max_divider = 1 << divider_bits;
-
-	divider += rate - 1;
-	do_div(divider, rate);
-
-	if ((s64)divider - 2 < 0)
-		return 0;
-
-	if ((s64)divider - 2 >= max_divider)
-		return -1;
-
-	return divider - 2;
-}
-
-/**
- * Given the parent's rate and the divider in 7.1 format, this works out the
- * resulting peripheral clock rate.
- *
- * @param parent_rate	clock rate of parent clock in Hz
- * @param divider which should be used in 7.1 format
- * @return effective clock rate of peripheral
- */
-static unsigned long get_rate_from_divider(unsigned long parent_rate,
-					   int divider)
-{
-	u64 rate;
-
-	rate = (u64)parent_rate * 2;
-	do_div(rate, divider + 2);
-	return rate;
-}
-
-unsigned long clock_get_periph_rate(enum periph_id periph_id,
-		enum clock_id parent)
-{
-	u32 *reg = get_periph_source_reg(periph_id);
-
-	return get_rate_from_divider(pll_rate[parent],
-		(readl(reg) & OUT_CLK_DIVISOR_MASK) >> OUT_CLK_DIVISOR_SHIFT);
-}
-
-/**
- * Find the best available 7.1 format divisor given a parent clock rate and
- * required child clock rate. This function assumes that a second-stage
- * divisor is available which can divide by powers of 2 from 1 to 256.
- *
- * @param divider_bits	number of divider bits (8 or 16)
- * @param parent_rate	clock rate of parent clock in Hz
- * @param rate		required clock rate for this clock
- * @param extra_div	value for the second-stage divisor (not set if this
- *			function returns -1.
- * @return divider which should be used, or -1 if nothing is valid
- *
- */
-static int find_best_divider(unsigned divider_bits, unsigned long parent_rate,
-			     unsigned long rate, int *extra_div)
-{
-	int shift;
-	int best_divider = -1;
-	int best_error = rate;
-
-	/* try dividers from 1 to 256 and find closest match */
-	for (shift = 0; shift <= 8 && best_error > 0; shift++) {
-		unsigned divided_parent = parent_rate >> shift;
-		int divider = clk_get_divider(divider_bits, divided_parent,
-					      rate);
-		unsigned effective_rate = get_rate_from_divider(divided_parent,
-						       divider);
-		int error = rate - effective_rate;
-
-		/* Given a valid divider, look for the lowest error */
-		if (divider != -1 && error < best_error) {
-			best_error = error;
-			*extra_div = 1 << shift;
-			best_divider = divider;
-		}
-	}
-
-	/* return what we found - *extra_div will already be set */
-	return best_divider;
-}
-
 /**
  * Given a peripheral ID and the required source clock, this returns which
  * value should be programmed into the source mux for that peripheral.
@@ -681,11 +469,11 @@ static int find_best_divider(unsigned divider_bits, unsigned long parent_rate,
  * @param periph_id	peripheral to start
  * @param source	PLL id of required parent clock
  * @param mux_bits	Set to number of bits in mux register: 2 or 4
- * @param divider_bits	Set to number of divider bits (8 or 16)
+ * @param divider_bits  Set to number of divider bits (8 or 16)
  * @return mux value (0-4, or -1 if not found)
  */
-static int get_periph_clock_source(enum periph_id periph_id,
-		enum clock_id parent, int *mux_bits, int *divider_bits)
+int get_periph_clock_source(enum periph_id periph_id,
+	enum clock_id parent, int *mux_bits, int *divider_bits)
 {
 	enum clock_type_id type;
 	enum periphc_internal_id internal_id;
@@ -716,88 +504,6 @@ static int get_periph_clock_source(enum periph_id periph_id,
 	return -1;
 }
 
-/**
- * Adjust peripheral PLL to use the given divider and source.
- *
- * @param periph_id	peripheral to adjust
- * @param source	Source number (0-3 or 0-7)
- * @param mux_bits	Number of mux bits (2 or 4)
- * @param divider	Required divider in 7.1 or 15.1 format
- * @return 0 if ok, -1 on error (requesting a parent clock which is not valid
- *		for this peripheral)
- */
-static int adjust_periph_pll(enum periph_id periph_id, int source,
-			     int mux_bits, unsigned divider)
-{
-	u32 *reg = get_periph_source_reg(periph_id);
-
-	clrsetbits_le32(reg, OUT_CLK_DIVISOR_MASK,
-			divider << OUT_CLK_DIVISOR_SHIFT);
-	udelay(1);
-
-	/* work out the source clock and set it */
-	if (source < 0)
-		return -1;
-	if (mux_bits == 4) {
-		clrsetbits_le32(reg, OUT_CLK_SOURCE4_MASK,
-			source << OUT_CLK_SOURCE4_SHIFT);
-	} else {
-		clrsetbits_le32(reg, OUT_CLK_SOURCE_MASK,
-			source << OUT_CLK_SOURCE_SHIFT);
-	}
-	udelay(2);
-	return 0;
-}
-
-unsigned clock_adjust_periph_pll_div(enum periph_id periph_id,
-		enum clock_id parent, unsigned rate, int *extra_div)
-{
-	unsigned effective_rate;
-	int mux_bits, source;
-	int divider, divider_bits = 0;
-
-	/* work out the source clock and set it */
-	source = get_periph_clock_source(periph_id, parent, &mux_bits,
-					 &divider_bits);
-
-	if (extra_div)
-		divider = find_best_divider(divider_bits, pll_rate[parent],
-					    rate, extra_div);
-	else
-		divider = clk_get_divider(divider_bits, pll_rate[parent],
-					  rate);
-	assert(divider >= 0);
-	if (adjust_periph_pll(periph_id, source, mux_bits, divider))
-		return -1U;
-	debug("periph %d, rate=%d, reg=%p = %x\n", periph_id, rate,
-		get_periph_source_reg(periph_id),
-		readl(get_periph_source_reg(periph_id)));
-
-	/* Check what we ended up with. This shouldn't matter though */
-	effective_rate = clock_get_periph_rate(periph_id, parent);
-	if (extra_div)
-		effective_rate /= *extra_div;
-	if (rate != effective_rate)
-		debug("Requested clock rate %u not honored (got %u)\n",
-		       rate, effective_rate);
-	return effective_rate;
-}
-
-unsigned clock_start_periph_pll(enum periph_id periph_id,
-		enum clock_id parent, unsigned rate)
-{
-	unsigned effective_rate;
-
-	reset_set_enable(periph_id, 1);
-	clock_enable(periph_id);
-
-	effective_rate = clock_adjust_periph_pll_div(periph_id, parent, rate,
-						 NULL);
-
-	reset_set_enable(periph_id, 0);
-	return effective_rate;
-}
-
 void clock_set_enable(enum periph_id periph_id, int enable)
 {
 	struct clk_rst_ctlr *clkrst =
@@ -819,16 +525,6 @@ void clock_set_enable(enum periph_id periph_id, int enable)
 	writel(reg, clk);
 }
 
-void clock_enable(enum periph_id clkid)
-{
-	clock_set_enable(clkid, 1);
-}
-
-void clock_disable(enum periph_id clkid)
-{
-	clock_set_enable(clkid, 0);
-}
-
 void reset_set_enable(enum periph_id periph_id, int enable)
 {
 	struct clk_rst_ctlr *clkrst =
@@ -850,146 +546,6 @@ void reset_set_enable(enum periph_id periph_id, int enable)
 	writel(reg, reset);
 }
 
-void reset_periph(enum periph_id periph_id, int us_delay)
-{
-	/* Put peripheral into reset */
-	reset_set_enable(periph_id, 1);
-	udelay(us_delay);
-
-	/* Remove reset */
-	reset_set_enable(periph_id, 0);
-
-	udelay(us_delay);
-}
-
-void reset_cmplx_set_enable(int cpu, int which, int reset)
-{
-	struct clk_rst_ctlr *clkrst =
-			(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
-	u32 mask;
-
-	/* Form the mask, which depends on the cpu chosen. Tegra3 has 4 */
-	assert(cpu >= 0 && cpu < 4);
-	mask = which << cpu;
-
-	/* either enable or disable those reset for that CPU */
-	if (reset)
-		writel(mask, &clkrst->crc_cpu_cmplx_set);
-	else
-		writel(mask, &clkrst->crc_cpu_cmplx_clr);
-}
-
-unsigned clock_get_rate(enum clock_id clkid)
-{
-	struct clk_pll *pll;
-	u32 base;
-	u32 divm;
-	u64 parent_rate;
-	u64 rate;
-
-	parent_rate = osc_freq[clock_get_osc_freq()];
-	if (clkid == CLOCK_ID_OSC)
-		return parent_rate;
-
-	pll = get_pll(clkid);
-	base = readl(&pll->pll_base);
-
-	/* Oh for bf_unpack()... */
-	rate = parent_rate * ((base & PLL_DIVN_MASK) >> PLL_DIVN_SHIFT);
-	divm = (base & PLL_DIVM_MASK) >> PLL_DIVM_SHIFT;
-	if (clkid == CLOCK_ID_USB)
-		divm <<= (base & PLLU_VCO_FREQ_MASK) >> PLLU_VCO_FREQ_SHIFT;
-	else
-		divm <<= (base & PLL_DIVP_MASK) >> PLL_DIVP_SHIFT;
-	do_div(rate, divm);
-	return rate;
-}
-
-/**
- * Set the output frequency you want for each PLL clock.
- * PLL output frequencies are programmed by setting their N, M and P values.
- * The governing equations are:
- *     VCO = (Fi / m) * n, Fo = VCO / (2^p)
- *     where Fo is the output frequency from the PLL.
- * Example: Set the output frequency to 216Mhz(Fo) with 12Mhz OSC(Fi)
- *     216Mhz = ((12Mhz / m) * n) / (2^p) so n=432,m=12,p=1
- * Please see Tegra TRM section 5.3 to get the detail for PLL Programming
- *
- * @param n PLL feedback divider(DIVN)
- * @param m PLL input divider(DIVN)
- * @param p post divider(DIVP)
- * @param cpcon base PLL charge pump(CPCON)
- * @return 0 if ok, -1 on error (the requested PLL is incorrect and cannot
- *		be overriden), 1 if PLL is already correct
- */
-static int clock_set_rate(enum clock_id clkid, u32 n, u32 m, u32 p, u32 cpcon)
-{
-	u32 base_reg;
-	u32 misc_reg;
-	struct clk_pll *pll;
-
-	pll = get_pll(clkid);
-
-	base_reg = readl(&pll->pll_base);
-
-	/* Set BYPASS, m, n and p to PLL_BASE */
-	base_reg &= ~PLL_DIVM_MASK;
-	base_reg |= m << PLL_DIVM_SHIFT;
-
-	base_reg &= ~PLL_DIVN_MASK;
-	base_reg |= n << PLL_DIVN_SHIFT;
-
-	base_reg &= ~PLL_DIVP_MASK;
-	base_reg |= p << PLL_DIVP_SHIFT;
-
-	if (clkid == CLOCK_ID_PERIPH) {
-		/*
-		 * If the PLL is already set up, check that it is correct
-		 * and record this info for clock_verify() to check.
-		 */
-		if (base_reg & PLL_BASE_OVRRIDE_MASK) {
-			base_reg |= PLL_ENABLE_MASK;
-			if (base_reg != readl(&pll->pll_base))
-				pllp_valid = 0;
-			return pllp_valid ? 1 : -1;
-		}
-		base_reg |= PLL_BASE_OVRRIDE_MASK;
-	}
-
-	base_reg |= PLL_BYPASS_MASK;
-	writel(base_reg, &pll->pll_base);
-
-	/* Set cpcon to PLL_MISC */
-	misc_reg = readl(&pll->pll_misc);
-	misc_reg &= ~PLL_CPCON_MASK;
-	misc_reg |= cpcon << PLL_CPCON_SHIFT;
-	writel(misc_reg, &pll->pll_misc);
-
-	/* Enable PLL */
-	base_reg |= PLL_ENABLE_MASK;
-	writel(base_reg, &pll->pll_base);
-
-	/* Disable BYPASS */
-	base_reg &= ~PLL_BYPASS_MASK;
-	writel(base_reg, &pll->pll_base);
-
-	return 0;
-}
-
-void clock_ll_start_uart(enum periph_id periph_id)
-{
-	/* Assert UART reset and enable clock */
-	reset_set_enable(periph_id, 1);
-	clock_enable(periph_id);
-	clock_ll_set_source(periph_id, 0); /* UARTx_CLK_SRC = 00, PLLP_OUT0 */
-
-	/* wait for 2us */
-	udelay(2);
-
-	/* De-assert reset to UART */
-	reset_set_enable(periph_id, 0);
-}
-
 #ifdef CONFIG_OF_CONTROL
 /*
  * Convert a device tree clock ID to our peripheral ID. They are mostly
@@ -999,7 +555,7 @@ void clock_ll_start_uart(enum periph_id periph_id)
  * @param clk_id	Clock ID according to tegra30 device tree binding
  * @return peripheral ID, or PERIPH_ID_NONE if the clock ID is invalid
  */
-static enum periph_id clk_id_to_periph_id(int clk_id)
+enum periph_id clk_id_to_periph_id(int clk_id)
 {
 	if (clk_id > PERIPH_ID_COUNT)
 		return PERIPH_ID_NONE;
@@ -1027,36 +583,8 @@ static enum periph_id clk_id_to_periph_id(int clk_id)
 		return clk_id;
 	}
 }
-
-int clock_decode_periph_id(const void *blob, int node)
-{
-	enum periph_id id;
-	u32 cell[2];
-	int err;
-
-	err = fdtdec_get_int_array(blob, node, "clocks", cell,
-				   ARRAY_SIZE(cell));
-	if (err)
-		return -1;
-	id = clk_id_to_periph_id(cell[1]);
-	assert(clock_periph_id_isvalid(id));
-	return id;
-}
 #endif /* CONFIG_OF_CONTROL */
 
-int clock_verify(void)
-{
-	struct clk_pll *pll = get_pll(CLOCK_ID_PERIPH);
-	u32 reg = readl(&pll->pll_base);
-
-	if (!pllp_valid) {
-		printf("Warning: PLLP %x is not correct\n", reg);
-		return -1;
-	}
-	debug("PLLP %x is correct\n", reg);
-	return 0;
-}
-
 void clock_early_init(void)
 {
 	/*
@@ -1088,15 +616,3 @@ void clock_early_init(void)
 		break;
 	}
 }
-
-void clock_init(void)
-{
-	pll_rate[CLOCK_ID_MEMORY] = clock_get_rate(CLOCK_ID_MEMORY);
-	pll_rate[CLOCK_ID_PERIPH] = clock_get_rate(CLOCK_ID_PERIPH);
-	pll_rate[CLOCK_ID_CGENERAL] = clock_get_rate(CLOCK_ID_CGENERAL);
-	pll_rate[CLOCK_ID_OSC] = clock_get_rate(CLOCK_ID_OSC);
-	pll_rate[CLOCK_ID_SFROM32KHZ] = 32768;
-	debug("Osc = %d\n", pll_rate[CLOCK_ID_OSC]);
-	debug("PLLM = %d\n", pll_rate[CLOCK_ID_MEMORY]);
-	debug("PLLP = %d\n", pll_rate[CLOCK_ID_PERIPH]);
-}