omap5: emif: Add emif/ddr configurations required for omap5 evm

Add the emif configurations required for omap5 soc.Add the
correct ddr part configurations required for omap5 evm board.
EDB8164B3PH from ELPIDA is the part used on the board.

Also changes are done to retain some part of the code
common for OMAP4/5 and keep only the remaining in the Soc
specific directories.

Signed-off-by: sricharan <r.sricharan@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

2 files changed, 283 insertions, 0 deletions

diff --git a/arch/arm/cpu/armv7/omap5/emif.c b/arch/arm/cpu/armv7/omap5/emif.c
new file mode 100644
index 0000000000..8019ffe3d3
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap5/emif.c
@@ -0,0 +1,105 @@
+/*
+ * EMIF programming
+ *
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * Aneesh V <aneesh@ti.com> for OMAP4
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/emif.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/utils.h>
+
+#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+#define print_timing_reg(reg) debug(#reg" - 0x%08x\n", (reg))
+static u32 *const T_num = (u32 *)OMAP5_SRAM_SCRATCH_EMIF_T_NUM;
+static u32 *const T_den = (u32 *)OMAP5_SRAM_SCRATCH_EMIF_T_DEN;
+static u32 *const emif_sizes = (u32 *)OMAP5_SRAM_SCRATCH_EMIF_SIZE;
+#endif
+
+#ifdef CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
+/* Base AC Timing values specified by JESD209-2 for 532MHz operation */
+static const struct lpddr2_ac_timings timings_jedec_532_mhz = {
+	.max_freq = 532000000,
+	.RL = 8,
+	.tRPab = 21,
+	.tRCD = 18,
+	.tWR = 15,
+	.tRASmin = 42,
+	.tRRD = 10,
+	.tWTRx2 = 15,
+	.tXSR = 140,
+	.tXPx2 = 15,
+	.tRFCab = 130,
+	.tRTPx2 = 15,
+	.tCKE = 3,
+	.tCKESR = 15,
+	.tZQCS = 90,
+	.tZQCL = 360,
+	.tZQINIT = 1000,
+	.tDQSCKMAXx2 = 11,
+	.tRASmax = 70,
+	.tFAW = 50
+};
+
+/*
+ * Min tCK values specified by JESD209-2
+ * Min tCK specifies the minimum duration of some AC timing parameters in terms
+ * of the number of cycles. If the calculated number of cycles based on the
+ * absolute time value is less than the min tCK value, min tCK value should
+ * be used instead. This typically happens at low frequencies.
+ */
+static const struct lpddr2_min_tck min_tck_jedec = {
+	.tRL = 3,
+	.tRP_AB = 3,
+	.tRCD = 3,
+	.tWR = 3,
+	.tRAS_MIN = 3,
+	.tRRD = 2,
+	.tWTR = 2,
+	.tXP = 2,
+	.tRTP = 2,
+	.tCKE = 3,
+	.tCKESR = 3,
+	.tFAW = 8
+};
+
+static const struct lpddr2_ac_timings const*
+			jedec_ac_timings[MAX_NUM_SPEEDBINS] = {
+	&timings_jedec_532_mhz
+};
+
+static const struct lpddr2_device_timings jedec_default_timings = {
+	.ac_timings = jedec_ac_timings,
+	.min_tck = &min_tck_jedec
+};
+
+void emif_get_device_timings(u32 emif_nr,
+		const struct lpddr2_device_timings **cs0_device_timings,
+		const struct lpddr2_device_timings **cs1_device_timings)
+{
+	/* Assume Identical devices on EMIF1 & EMIF2 */
+	*cs0_device_timings = &jedec_default_timings;
+	*cs1_device_timings = NULL;
+}
+#endif /* CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS */
diff --git a/arch/arm/cpu/armv7/omap5/sdram_elpida.c b/arch/arm/cpu/armv7/omap5/sdram_elpida.c
new file mode 100644
index 0000000000..ad198e6d1b
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap5/sdram_elpida.c
@@ -0,0 +1,178 @@
+/*
+ * Timing and Organization details of the Elpida parts used in OMAP5
+ * EVM
+ *
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * Aneesh V <aneesh@ti.com>
+ * Sricharan R <r.sricharan@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm/emif.h>
+#include <asm/arch/sys_proto.h>
+
+/*
+ * This file provides details of the LPDDR2 SDRAM parts used on OMAP5
+ * EVM. Since the parts used and geometry are identical for
+ * evm for a given OMAP5 revision, this information is kept
+ * here instead of being in board directory. However the key functions
+ * exported are weakly linked so that they can be over-ridden in the board
+ * directory if there is a OMAP5 board in the future that uses a different
+ * memory device or geometry.
+ *
+ * For any new board with different memory devices over-ride one or more
+ * of the following functions as per the CONFIG flags you intend to enable:
+ * - emif_get_reg_dump()
+ * - emif_get_dmm_regs()
+ * - emif_get_device_details()
+ * - emif_get_device_timings()
+ */
+
+#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+
+const struct emif_regs emif_regs_elpida_532_mhz_1cs = {
+	.sdram_config_init		= 0x80801aB2,
+	.sdram_config			= 0x808022B2,
+	.ref_ctrl			= 0x0000081A,
+	.sdram_tim1			= 0x772F6873,
+	.sdram_tim2			= 0x304A129A,
+	.sdram_tim3			= 0x02F7E45F,
+	.read_idle_ctrl			= 0x00050000,
+	.zq_config			= 0x000B3215,
+	.temp_alert_config		= 0x08000A05,
+	.emif_ddr_phy_ctlr_1_init	= 0x0E38200D,
+	.emif_ddr_phy_ctlr_1		= 0x0E38200D
+};
+
+const struct dmm_lisa_map_regs lisa_map_4G_x_1_x_2 = {
+	.dmm_lisa_map_0 = 0xFF020100,
+	.dmm_lisa_map_1 = 0,
+	.dmm_lisa_map_2 = 0,
+	.dmm_lisa_map_3 = 0x80640300
+};
+
+static void emif_get_reg_dump_sdp(u32 emif_nr, const struct emif_regs **regs)
+{
+	*regs = &emif_regs_elpida_532_mhz_1cs;
+}
+void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs)
+	__attribute__((weak, alias("emif_get_reg_dump_sdp")));
+
+static void emif_get_dmm_regs_sdp(const struct dmm_lisa_map_regs
+						**dmm_lisa_regs)
+{
+	*dmm_lisa_regs = &lisa_map_4G_x_1_x_2;
+}
+
+void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs)
+	__attribute__((weak, alias("emif_get_dmm_regs_sdp")));
+
+#else
+
+static const struct lpddr2_device_details elpida_4G_S4_details = {
+	.type		= LPDDR2_TYPE_S4,
+	.density	= LPDDR2_DENSITY_4Gb,
+	.io_width	= LPDDR2_IO_WIDTH_32,
+	.manufacturer	= LPDDR2_MANUFACTURER_ELPIDA
+};
+
+static void emif_get_device_details_sdp(u32 emif_nr,
+		struct lpddr2_device_details *cs0_device_details,
+		struct lpddr2_device_details *cs1_device_details)
+{
+	/* EMIF1 & EMIF2 have identical configuration */
+	*cs0_device_details = elpida_4G_S4_details;
+
+	/* Nothing is conected on cs1 */
+	cs1_device_details = NULL;
+}
+
+void emif_get_device_details(u32 emif_nr,
+		struct lpddr2_device_details *cs0_device_details,
+		struct lpddr2_device_details *cs1_device_details)
+	__attribute__((weak, alias("emif_get_device_details_sdp")));
+
+#endif /* CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS */
+
+#ifndef CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
+static const struct lpddr2_ac_timings timings_jedec_532_mhz = {
+	.max_freq	= 532000000,
+	.RL		= 8,
+	.tRPab		= 21,
+	.tRCD		= 18,
+	.tWR		= 15,
+	.tRASmin	= 42,
+	.tRRD		= 10,
+	.tWTRx2		= 15,
+	.tXSR		= 140,
+	.tXPx2		= 15,
+	.tRFCab		= 130,
+	.tRTPx2		= 15,
+	.tCKE		= 3,
+	.tCKESR		= 15,
+	.tZQCS		= 90,
+	.tZQCL		= 360,
+	.tZQINIT	= 1000,
+	.tDQSCKMAXx2	= 11,
+	.tRASmax	= 70,
+	.tFAW		= 50
+};
+
+static const struct lpddr2_min_tck min_tck_elpida = {
+	.tRL		= 3,
+	.tRP_AB		= 3,
+	.tRCD		= 3,
+	.tWR		= 3,
+	.tRAS_MIN	= 3,
+	.tRRD		= 2,
+	.tWTR		= 2,
+	.tXP		= 2,
+	.tRTP		= 2,
+	.tCKE		= 3,
+	.tCKESR		= 3,
+	.tFAW		= 8
+};
+
+static const struct lpddr2_ac_timings *elpida_ac_timings[MAX_NUM_SPEEDBINS] = {
+	&timings_jedec_532_mhz
+};
+
+static const struct lpddr2_device_timings elpida_4G_S4_timings = {
+	.ac_timings	= elpida_ac_timings,
+	.min_tck	= &min_tck_elpida,
+};
+
+void emif_get_device_timings_sdp(u32 emif_nr,
+		const struct lpddr2_device_timings **cs0_device_timings,
+		const struct lpddr2_device_timings **cs1_device_timings)
+{
+	/* Identical devices on EMIF1 & EMIF2 */
+	*cs0_device_timings = &elpida_4G_S4_timings;
+	*cs1_device_timings = NULL;
+}
+
+void emif_get_device_timings(u32 emif_nr,
+		const struct lpddr2_device_timings **cs0_device_timings,
+		const struct lpddr2_device_timings **cs1_device_timings)
+	__attribute__((weak, alias("emif_get_device_timings_sdp")));
+
+#endif /* CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS */