Merge branch 'master' of git://git.denx.de/u-boot into master

Conflicts:
	drivers/power/power_fsl.c
	include/configs/mx35pdk.h
	include/configs/mx53loco.h
	include/configs/woodburn_common.h
	board/woodburn/woodburn.c

These boards still use the old old PMIC framework, so they
do not merge properly after the power framework was merged into
mainline.

Fix all conflicts and update woodburn to use Power Framework.

Signed-off-by: Stefano Babic <sbabic@denx.de>

2 files changed, 93 insertions, 0 deletions

diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c
index e4c123cd21..da5bc73185 100644
--- a/arch/arm/cpu/armv7/am33xx/board.c
+++ b/arch/arm/cpu/armv7/am33xx/board.c
@@ -33,6 +33,11 @@
 #include <i2c.h>
 #include <miiphy.h>
 #include <cpsw.h>
+#include <asm/errno.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/musb.h>
+#include <asm/omap_musb.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -63,3 +68,83 @@ void setup_clocks_for_console(void)
 	/* Not yet implemented */
 	return;
 }
+
+/* AM33XX has two MUSB controllers which can be host or gadget */
+#if (defined(CONFIG_MUSB_GADGET) || defined(CONFIG_MUSB_HOST)) && \
+	(defined(CONFIG_AM335X_USB0) || defined(CONFIG_AM335X_USB1))
+static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
+
+/* USB 2.0 PHY Control */
+#define CM_PHY_PWRDN			(1 << 0)
+#define CM_PHY_OTG_PWRDN		(1 << 1)
+#define OTGVDET_EN			(1 << 19)
+#define OTGSESSENDEN			(1 << 20)
+
+static void am33xx_usb_set_phy_power(u8 on, u32 *reg_addr)
+{
+	if (on) {
+		clrsetbits_le32(reg_addr, CM_PHY_PWRDN | CM_PHY_OTG_PWRDN,
+				OTGVDET_EN | OTGSESSENDEN);
+	} else {
+		clrsetbits_le32(reg_addr, 0, CM_PHY_PWRDN | CM_PHY_OTG_PWRDN);
+	}
+}
+
+static struct musb_hdrc_config musb_config = {
+	.multipoint     = 1,
+	.dyn_fifo       = 1,
+	.num_eps        = 16,
+	.ram_bits       = 12,
+};
+
+#ifdef CONFIG_AM335X_USB0
+static void am33xx_otg0_set_phy_power(u8 on)
+{
+	am33xx_usb_set_phy_power(on, &cdev->usb_ctrl0);
+}
+
+struct omap_musb_board_data otg0_board_data = {
+	.set_phy_power = am33xx_otg0_set_phy_power,
+};
+
+static struct musb_hdrc_platform_data otg0_plat = {
+	.mode           = CONFIG_AM335X_USB0_MODE,
+	.config         = &musb_config,
+	.power          = 50,
+	.platform_ops	= &musb_dsps_ops,
+	.board_data	= &otg0_board_data,
+};
+#endif
+
+#ifdef CONFIG_AM335X_USB1
+static void am33xx_otg1_set_phy_power(u8 on)
+{
+	am33xx_usb_set_phy_power(on, &cdev->usb_ctrl1);
+}
+
+struct omap_musb_board_data otg1_board_data = {
+	.set_phy_power = am33xx_otg1_set_phy_power,
+};
+
+static struct musb_hdrc_platform_data otg1_plat = {
+	.mode           = CONFIG_AM335X_USB1_MODE,
+	.config         = &musb_config,
+	.power          = 50,
+	.platform_ops	= &musb_dsps_ops,
+	.board_data	= &otg1_board_data,
+};
+#endif
+#endif
+
+int arch_misc_init(void)
+{
+#ifdef CONFIG_AM335X_USB0
+	musb_register(&otg0_plat, &otg0_board_data,
+		(void *)AM335X_USB0_OTG_BASE);
+#endif
+#ifdef CONFIG_AM335X_USB1
+	musb_register(&otg1_plat, &otg1_board_data,
+		(void *)AM335X_USB1_OTG_BASE);
+#endif
+	return 0;
+}
diff --git a/arch/arm/cpu/armv7/am33xx/clock.c b/arch/arm/cpu/armv7/am33xx/clock.c
index bc2abb657c..0b4cb4e529 100644
--- a/arch/arm/cpu/armv7/am33xx/clock.c
+++ b/arch/arm/cpu/armv7/am33xx/clock.c
@@ -40,6 +40,7 @@
 #define CLK_MODE_MASK		0xfffffff8
 #define CLK_DIV_SEL		0xFFFFFFE0
 #define CPGMAC0_IDLE		0x30000
+#define DPLL_CLKDCOLDO_GATE_CTRL        0x300
 
 const struct cm_perpll *cmper = (struct cm_perpll *)CM_PER;
 const struct cm_wkuppll *cmwkup = (struct cm_wkuppll *)CM_WKUP;
@@ -194,6 +195,11 @@ static void enable_per_clocks(void)
 	writel(PRCM_MOD_EN, &cmrtc->rtcclkctrl);
 	while (readl(&cmrtc->rtcclkctrl) != PRCM_MOD_EN)
 		;
+
+	/* MUSB */
+	writel(PRCM_MOD_EN, &cmper->usb0clkctrl);
+	while (readl(&cmper->usb0clkctrl) != PRCM_MOD_EN)
+		;
 }
 
 static void mpu_pll_config(void)
@@ -290,6 +296,8 @@ static void per_pll_config(void)
 
 	while (readl(&cmwkup->idlestdpllper) != ST_DPLL_CLK)
 		;
+
+	writel(DPLL_CLKDCOLDO_GATE_CTRL, &cmwkup->clkdcoldodpllper);
 }
 
 void ddr_pll_config(unsigned int ddrpll_m)