Makefile: move all Power Architecture boards into boards.cfg

Clean up Makefile, and drop a lot of the config.mk files on the way.

We now also automatically pick all boards that are listed in
boards.cfg (and with all configurations), so we can drop the redundant
entries from MAKEALL to avoid building these twice.

Signed-off-by: Wolfgang Denk <wd@denx.de>

1 files changed, 0 insertions, 1169 deletions

diff --git a/Makefile b/Makefile
index ad09a5fa23..30a564d3cb 100644
--- a/Makefile
+++ b/Makefile
@@ -503,882 +503,6 @@ sinclude .boards.depend
 lcname	= $(shell echo $(1) | sed -e 's/\(.*\)_config/\L\1/')
 ucname	= $(shell echo $(1) | sed -e 's/\(.*\)_config/\U\1/')
 
-#========================================================================
-# PowerPC
-#========================================================================
-
-#########################################################################
-## MPC5xxx Systems
-#########################################################################
-
-digsy_mtc_config \
-digsy_mtc_LOWBOOT_config	\
-digsy_mtc_RAMBOOT_config:	unconfig
-	@mkdir -p $(obj)include
-	@mkdir -p $(obj)board/digsy_mtc
-	@ >$(obj)include/config.h
-	@[ -z "$(findstring LOWBOOT_,$@)" ] || \
-		echo "CONFIG_SYS_TEXT_BASE = 0xFF000000" >$(obj)board/digsy_mtc/config.tmp
-	@[ -z "$(findstring RAMBOOT_,$@)" ] || \
-		echo "CONFIG_SYS_TEXT_BASE = 0x00100000" >$(obj)board/digsy_mtc/config.tmp
-	@$(MKCONFIG) -n $@ -a digsy_mtc powerpc mpc5xxx digsy_mtc
-
-galaxy5200_LOWBOOT_config \
-galaxy5200_config:	unconfig
-	@mkdir -p $(obj)include
-	@echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
-	@$(MKCONFIG) -n $@ -a galaxy5200 powerpc mpc5xxx galaxy5200
-
-Lite5200_config				\
-Lite5200_LOWBOOT_config			\
-Lite5200_LOWBOOT08_config		\
-icecube_5200_config			\
-icecube_5200_LOWBOOT_config		\
-icecube_5200_LOWBOOT08_config		\
-icecube_5200_DDR_config			\
-icecube_5200_DDR_LOWBOOT_config		\
-icecube_5200_DDR_LOWBOOT08_config:	unconfig
-	@mkdir -p $(obj)include
-	@mkdir -p $(obj)board/icecube
-	@[ -z "$(findstring LOWBOOT_,$@)" ] || \
-		if [ "$(findstring DDR,$@)" ] ; \
-			then echo "CONFIG_SYS_TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \
-			else echo "CONFIG_SYS_TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \
-		fi
-	@[ -z "$(findstring LOWBOOT08,$@)" ] || \
-		echo "CONFIG_SYS_TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp
-	@[ -z "$(findstring DDR,$@)" ] || \
-		echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h
-	@$(MKCONFIG) -n $@ -a IceCube powerpc mpc5xxx icecube
-
-lite5200b_config	\
-lite5200b_PM_config	\
-lite5200b_LOWBOOT_config:	unconfig
-	@mkdir -p $(obj)include
-	@mkdir -p $(obj)board/icecube
-	@ echo "#define CONFIG_MPC5200_DDR"	>>$(obj)include/config.h
-	@ echo "#define CONFIG_LITE5200B"	>>$(obj)include/config.h
-	@[ -z "$(findstring _PM_,$@)" ] || \
-		echo "#define CONFIG_LITE5200B_PM" >>$(obj)include/config.h
-	@[ -z "$(findstring LOWBOOT_,$@)" ] || \
-		echo "CONFIG_SYS_TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp
-	@$(MKCONFIG) -n $@ -a IceCube  powerpc mpc5xxx icecube
-
-mcc200_config	\
-mcc200_SDRAM_config	\
-mcc200_highboot_config	\
-mcc200_COM12_config	\
-mcc200_COM12_SDRAM_config	\
-mcc200_COM12_highboot_config	\
-mcc200_COM12_highboot_SDRAM_config	\
-mcc200_highboot_SDRAM_config	\
-prs200_config	\
-prs200_DDR_config	\
-prs200_highboot_config	\
-prs200_highboot_DDR_config:	unconfig
-	@mkdir -p $(obj)include
-	@mkdir -p $(obj)board/mcc200
-	@[ -z "$(findstring highboot,$@)" ] || \
-		echo "CONFIG_SYS_TEXT_BASE = 0xFFF00000" >$(obj)board/mcc200/config.tmp
-	@[ -n "$(findstring _SDRAM,$@)" ] || \
-		if [ -n "$(findstring prs200,$@)" ]; \
-		then \
-			if [ -z "$(findstring _DDR,$@)" ];\
-			then \
-				echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h ;\
-			fi; \
-		fi
-	@[ -z "$(findstring _SDRAM,$@)" ] || \
-		echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h
-	@[ -z "$(findstring COM12,$@)" ] || \
-		echo "#define CONFIG_CONSOLE_COM12" >>$(obj)include/config.h
-	@[ -z "$(findstring prs200,$@)" ] || \
-		echo "#define CONFIG_PRS200" >>$(obj)include/config.h
-	@$(MKCONFIG) -n $@ -a mcc200 powerpc mpc5xxx mcc200
-
-MVBC_P_config: unconfig
-	@mkdir -p $(obj)include
-	@mkdir -p $(obj)board/mvbc_p
-	@ >$(obj)include/config.h
-	@[ -z "$(findstring MVBC_P,$@)" ] || \
-		echo "#define CONFIG_MVBC_P" >>$(obj)include/config.h
-	@$(MKCONFIG) -n $@ -a $@ powerpc mpc5xxx mvbc_p matrix_vision
-
-MVSMR_config: unconfig
-	@mkdir -p $(obj)include
-	@mkdir -p $(obj)board/matrix_vision/mvsmr
-	@$(MKCONFIG) $@ powerpc mpc5xxx mvsmr matrix_vision
-
-pcm030_config \
-pcm030_LOWBOOT_config:	unconfig
-	@mkdir -p $(obj)include $(obj)board/phytec/pcm030
-	@ >$(obj)include/config.h
-	@[ -z "$(findstring LOWBOOT_,$@)" ] || \
-		echo "CONFIG_SYS_TEXT_BASE = 0xFF000000" >$(obj)board/phytec/pcm030/config.tmp
-	@$(MKCONFIG) -n $@ -a pcm030 powerpc mpc5xxx pcm030 phytec
-
-PM520_config \
-PM520_DDR_config \
-PM520_ROMBOOT_config \
-PM520_ROMBOOT_DDR_config:	unconfig
-	@mkdir -p $(obj)include
-	@[ -z "$(findstring DDR,$@)" ] || \
-		echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h
-	@[ -z "$(findstring ROMBOOT,$@)" ] || \
-		echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h
-	@$(MKCONFIG) -n $@ -a PM520 powerpc mpc5xxx pm520
-
-TB5200_B_config \
-TB5200_config:	unconfig
-	@mkdir -p $(obj)include
-	@[ -z "$(findstring _B,$@)" ] || \
-		echo "#define CONFIG_TQM5200_B"	>>$(obj)include/config.h
-	@$(MKCONFIG) -n $@ -a TB5200 powerpc mpc5xxx tqm5200 tqc
-
-MINI5200_config	\
-EVAL5200_config	\
-TOP5200_config:	unconfig
-	@mkdir -p $(obj)include
-	@ echo "#define CONFIG_$(@:_config=) 1"	>$(obj)include/config.h
-	@$(MKCONFIG) -n $@ -a TOP5200 powerpc mpc5xxx top5200 emk
-
-Total5200_config		\
-Total5200_lowboot_config	\
-Total5200_Rev2_config		\
-Total5200_Rev2_lowboot_config:	unconfig
-	@mkdir -p $(obj)include
-	@mkdir -p $(obj)board/total5200
-	@[ -n "$(findstring Rev,$@)" ] || \
-		echo "#define CONFIG_TOTAL5200_REV 1" >>$(obj)include/config.h
-	@[ -z "$(findstring Rev2_,$@)" ] || \
-		echo "#define CONFIG_TOTAL5200_REV 2" >>$(obj)include/config.h
-	@[ -z "$(findstring lowboot_,$@)" ] || \
-		echo "CONFIG_SYS_TEXT_BASE = 0xFE000000" >$(obj)board/total5200/config.tmp
-	@$(MKCONFIG) -n $@ -a Total5200 powerpc mpc5xxx total5200
-
-cam5200_config \
-cam5200_niosflash_config \
-fo300_config \
-MiniFAP_config \
-TQM5200S_config \
-TQM5200S_HIGHBOOT_config \
-TQM5200_B_config \
-TQM5200_B_HIGHBOOT_config \
-TQM5200_config	\
-TQM5200_STK100_config:	unconfig
-	@mkdir -p $(obj)include
-	@mkdir -p $(obj)board/tqc/tqm5200
-	@[ -z "$(findstring cam5200,$@)" ] || \
-		{ echo "#define CONFIG_CAM5200"	  >>$(obj)include/config.h ; \
-		  echo "#define CONFIG_TQM5200S"  >>$(obj)include/config.h ; \
-		  echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \
-		}
-	@[ -z "$(findstring niosflash,$@)" ] || \
-		echo "#define CONFIG_CAM5200_NIOSFLASH"	>>$(obj)include/config.h
-	@[ -z "$(findstring fo300,$@)" ] || \
-		echo "#define CONFIG_FO300" >>$(obj)include/config.h
-	@[ -z "$(findstring MiniFAP,$@)" ] || \
-		echo "#define CONFIG_MINIFAP" >>$(obj)include/config.h
-	@[ -z "$(findstring STK100,$@)" ] || \
-		echo "#define CONFIG_STK52XX_REV100" >>$(obj)include/config.h
-	@[ -z "$(findstring TQM5200_B,$@)" ] || \
-		echo "#define CONFIG_TQM5200_B"	>>$(obj)include/config.h
-	@[ -z "$(findstring TQM5200S,$@)" ] || \
-		{ echo "#define CONFIG_TQM5200S"  >>$(obj)include/config.h ; \
-		  echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \
-		}
-	@[ -z "$(findstring HIGHBOOT,$@)" ] || \
-		echo "CONFIG_SYS_TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp
-	@$(MKCONFIG) -n $@ -a TQM5200 powerpc mpc5xxx tqm5200 tqc
-
-#########################################################################
-## MPC512x Systems
-#########################################################################
-
-mpc5121ads_config \
-mpc5121ads_rev2_config	\
-	: unconfig
-	@mkdir -p $(obj)include
-	@if [ "$(findstring rev2,$@)" ] ; then \
-		echo "#define CONFIG_MPC5121ADS_REV2 1" > $(obj)include/config.h; \
-	fi
-	@$(MKCONFIG) -n $@ -a mpc5121ads powerpc mpc512x mpc5121ads freescale
-
-#########################################################################
-## MPC8xx Systems
-#########################################################################
-
-Adder87x_config \
-AdderII_config	\
-AdderUSB_config	\
-Adder_config	\
-	:		unconfig
-	@mkdir -p $(obj)include
-	$(if $(findstring AdderII,$@), \
-		@echo "#define CONFIG_MPC852T" > $(obj)include/config.h)
-	@$(MKCONFIG) -n $@ -a Adder powerpc mpc8xx adder
-
-ADS860_config	  \
-FADS823_config	  \
-FADS850SAR_config \
-MPC86xADS_config  \
-MPC885ADS_config  \
-FADS860T_config:	unconfig
-	@$(MKCONFIG) -n $@ $@ powerpc mpc8xx fads
-
-GEN860T_SC_config	\
-GEN860T_config: unconfig
-	@mkdir -p $(obj)include
-	@[ -z "$(findstring _SC,$@)" ] || \
-		echo "#define CONFIG_SC" >>$(obj)include/config.h
-	@$(MKCONFIG) -n $@ -a GEN860T powerpc mpc8xx gen860t
-
-ICU862_100MHz_config	\
-ICU862_config: unconfig
-	@mkdir -p $(obj)include
-	@[ -z "$(findstring _100MHz,$@)" ] || \
-		echo "#define CONFIG_100MHz" >>$(obj)include/config.h
-	@$(MKCONFIG) -n $@ -a ICU862 powerpc mpc8xx icu862
-
-IVML24_256_config \
-IVML24_128_config \
-IVML24_config:	unconfig
-	@mkdir -p $(obj)include
-	@[ -z "$(findstring IVML24_config,$@)" ] || \
-		echo "#define CONFIG_IVML24_16M" >>$(obj)include/config.h
-	@[ -z "$(findstring IVML24_128_config,$@)" ] || \
-		echo "#define CONFIG_IVML24_32M" >>$(obj)include/config.h
-	@[ -z "$(findstring IVML24_256_config,$@)" ] || \
-		echo "#define CONFIG_IVML24_64M" >>$(obj)include/config.h
-	@$(MKCONFIG) -n $@ -a IVML24 powerpc mpc8xx ivm
-
-IVMS8_256_config \
-IVMS8_128_config \
-IVMS8_config:	unconfig
-	@mkdir -p $(obj)include
-	@[ -z "$(findstring IVMS8_config,$@)" ] || \
-		echo "#define CONFIG_IVMS8_16M"	>>$(obj)include/config.h
-	@[ -z "$(findstring IVMS8_128_config,$@)" ] || \
-		echo "#define CONFIG_IVMS8_32M"	>>$(obj)include/config.h
-	@[ -z "$(findstring IVMS8_256_config,$@)" ] || \
-		echo "#define CONFIG_IVMS8_64M"	>>$(obj)include/config.h
-	@$(MKCONFIG) -n $@ -a IVMS8 powerpc mpc8xx ivm
-
-MBX_config	\
-MBX860T_config:	unconfig
-	@$(MKCONFIG) -n $@ $@ powerpc mpc8xx mbx8xx
-
-NETVIA_V2_config \
-NETVIA_config:		unconfig
-	@mkdir -p $(obj)include
-	@[ -z "$(findstring NETVIA_config,$@)" ] || \
-		echo "#define CONFIG_NETVIA_VERSION 1" >>$(obj)include/config.h
-	@[ -z "$(findstring NETVIA_V2_config,$@)" ] || \
-		echo "#define CONFIG_NETVIA_VERSION 2" >>$(obj)include/config.h
-	@$(MKCONFIG) -n $@ -a NETVIA powerpc mpc8xx netvia
-
-NETPHONE_V2_config \
-NETPHONE_config:	unconfig
-	@mkdir -p $(obj)include
-	@[ -z "$(findstring NETPHONE_config,$@)" ] || \
-		echo "#define CONFIG_NETPHONE_VERSION 1" >>$(obj)include/config.h
-	@[ -z "$(findstring NETPHONE_V2_config,$@)" ] || \
-		echo "#define CONFIG_NETPHONE_VERSION 2" >>$(obj)include/config.h
-	@$(MKCONFIG) -n $@ -a NETPHONE powerpc mpc8xx netphone
-
-NETTA_ISDN_6412_SWAPHOOK_config \
-NETTA_ISDN_SWAPHOOK_config \
-NETTA_6412_SWAPHOOK_config \
-NETTA_SWAPHOOK_config \
-NETTA_ISDN_6412_config \
-NETTA_ISDN_config \
-NETTA_6412_config \
-NETTA_config:		unconfig
-	@mkdir -p $(obj)include
-	@[ -z "$(findstring ISDN_,$@)" ] || \
-		echo "#define CONFIG_NETTA_ISDN 1" >>$(obj)include/config.h
-	@[ -n "$(findstring ISDN_,$@)" ] || \
-		echo "#undef CONFIG_NETTA_ISDN" >>$(obj)include/config.h
-	@[ -z "$(findstring 6412_,$@)" ] || \
-		echo "#define CONFIG_NETTA_6412 1" >>$(obj)include/config.h
-	@[ -n "$(findstring 6412_,$@)" ] || \
-		echo "#undef CONFIG_NETTA_6412" >>$(obj)include/config.h
-	@[ -z "$(findstring SWAPHOOK_,$@)" ] || \
-		echo "#define CONFIG_NETTA_SWAPHOOK 1" >>$(obj)include/config.h
-	@[ -n "$(findstring SWAPHOOK_,$@)" ] || \
-		echo "#undef CONFIG_NETTA_SWAPHOOK" >>$(obj)include/config.h
-	@$(MKCONFIG) -n $@ -a NETTA powerpc mpc8xx netta
-
-NETTA2_V2_config \
-NETTA2_config:		unconfig
-	@mkdir -p $(obj)include
-	@[ -z "$(findstring NETTA2_config,$@)" ] || \
-		echo "#define CONFIG_NETTA2_VERSION 1" >>$(obj)include/config.h
-	@[ -z "$(findstring NETTA2_V2_config,$@)" ] || \
-		echo "#define CONFIG_NETTA2_VERSION 2" >>$(obj)include/config.h
-	@$(MKCONFIG) -n $@ -a NETTA2 powerpc mpc8xx netta2
-
-NC650_Rev1_config \
-NC650_Rev2_config \
-CP850_config:	unconfig
-	@mkdir -p $(obj)include
-	@[ -z "$(findstring CP850,$@)" ] || \
-		{ echo "#define CONFIG_CP850 1" >>$(obj)include/config.h ; \
-		  echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \
-		}
-	@[ -z "$(findstring Rev1,$@)" ] || \
-		{ echo "#define CONFIG_IDS852_REV1 1" >>$(obj)include/config.h ; \
-		}
-	@[ -z "$(findstring Rev2,$@)" ] || \
-		{ echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \
-		}
-	@$(MKCONFIG) -n $@ -a NC650 powerpc mpc8xx nc650
-
-RPXlite_DW_64_config		\
-RPXlite_DW_LCD_config		\
-RPXlite_DW_64_LCD_config	\
-RPXlite_DW_NVRAM_config		\
-RPXlite_DW_NVRAM_64_config	\
-RPXlite_DW_NVRAM_LCD_config	\
-RPXlite_DW_NVRAM_64_LCD_config	\
-RPXlite_DW_config:	unconfig
-	@mkdir -p $(obj)include
-	@[ -z "$(findstring _64,$@)" ] || \
-		echo "#define RPXlite_64MHz"		>>$(obj)include/config.h
-	@[ -z "$(findstring _LCD,$@)" ] || \
-		{ echo "#define CONFIG_LCD"		>>$(obj)include/config.h ; \
-		  echo "#define CONFIG_NEC_NL6448BC20"	>>$(obj)include/config.h ; \
-		}
-	@[ -z "$(findstring _NVRAM,$@)" ] || \
-		echo "#define  CONFIG_ENV_IS_IN_NVRAM"	>>$(obj)include/config.h
-	@$(MKCONFIG) -n $@ -a RPXlite_DW powerpc mpc8xx RPXlite_dw
-
-RRvision_LCD_config:	unconfig
-	@mkdir -p $(obj)include
-	@echo "#define CONFIG_LCD" >$(obj)include/config.h
-	@echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h
-	@$(MKCONFIG) -a RRvision powerpc mpc8xx RRvision
-
-SPD823TS_config:	unconfig
-	@$(MKCONFIG) $@ powerpc mpc8xx spd8xx
-
-SXNI855T_config:	unconfig
-	@$(MKCONFIG) $@ powerpc mpc8xx sixnet
-
-# Play some tricks for configuration selection
-# Only 855 and 860 boards may come with FEC
-# and only 823 boards may have LCD support
-xtract_8xx = $(subst _LCD,,$1)
-
-FPS850L_config		\
-FPS860L_config		\
-NSCU_config		\
-TQM823L_config		\
-TQM823L_LCD_config	\
-TQM850L_config		\
-TQM855L_config		\
-TQM860L_config		\
-TQM862L_config		\
-TQM823M_config		\
-TQM850M_config		\
-TQM855M_config		\
-TQM860M_config		\
-TQM862M_config		\
-TQM866M_config		\
-TQM885D_config		\
-TK885D_config		\
-virtlab2_config:	unconfig
-	@mkdir -p $(obj)include
-	@[ -z "$(findstring _LCD,$@)" ] || \
-		{ echo "#define CONFIG_LCD"		>>$(obj)include/config.h ; \
-		  echo "#define CONFIG_NEC_NL6448BC20"	>>$(obj)include/config.h ; \
-		}
-	@$(MKCONFIG) -n $@ -a $(call xtract_8xx,$@) powerpc mpc8xx tqm8xx tqc
-
-TTTech_config:	unconfig
-	@mkdir -p $(obj)include
-	@echo "#define CONFIG_LCD" >$(obj)include/config.h
-	@echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h
-	@$(MKCONFIG) -a TQM823L powerpc mpc8xx tqm8xx tqc
-
-v37_config:	unconfig
-	@mkdir -p $(obj)include
-	@echo "#define CONFIG_LCD" >$(obj)include/config.h
-	@echo "#define CONFIG_SHARP_LQ084V1DG21" >>$(obj)include/config.h
-	@$(MKCONFIG) $@ powerpc mpc8xx v37
-
-wtk_config:	unconfig
-	@mkdir -p $(obj)include
-	@echo "#define CONFIG_LCD" >$(obj)include/config.h
-	@echo "#define CONFIG_SHARP_LQ065T9DR51U" >>$(obj)include/config.h
-	@$(MKCONFIG) -a TQM823L powerpc mpc8xx tqm8xx tqc
-
-#########################################################################
-## PPC4xx Systems
-#########################################################################
-
-acadia_nand_config:	unconfig
-	@mkdir -p $(obj)include $(obj)board/amcc/acadia
-	@mkdir -p $(obj)nand_spl/board/amcc/acadia
-	@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
-	@echo "CONFIG_SYS_TEXT_BASE = 0x01000000" > $(obj)board/amcc/acadia/config.tmp
-	@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
-	@$(MKCONFIG) -n $@ -a acadia powerpc ppc4xx acadia amcc
-
-bamboo_nand_config:	unconfig
-	@mkdir -p $(obj)include $(obj)board/amcc/bamboo
-	@mkdir -p $(obj)nand_spl/board/amcc/bamboo
-	@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
-	@echo "CONFIG_SYS_TEXT_BASE = 0x01000000" > $(obj)board/amcc/bamboo/config.tmp
-	@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
-	@$(MKCONFIG) -n $@ -a bamboo powerpc ppc4xx bamboo amcc
-
-# Arches, Canyonlands & Glacier use different U-Boot images
-arches_config \
-canyonlands_config \
-glacier_config:	unconfig
-	@mkdir -p $(obj)include
-	@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
-		tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
-	@$(MKCONFIG) -n $@ -a canyonlands powerpc ppc4xx canyonlands amcc
-
-canyonlands_nand_config \
-glacier_nand_config:	unconfig
-	@mkdir -p $(obj)include $(obj)board/amcc/canyonlands
-	@mkdir -p $(obj)nand_spl/board/amcc/canyonlands
-	@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
-	@echo "#define CONFIG_$$(echo $(subst ,,$(@:_nand_config=)) | \
-		tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
-	@echo "CONFIG_SYS_TEXT_BASE = 0x01000000" > $(obj)board/amcc/canyonlands/config.tmp
-	@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
-	@$(MKCONFIG) -n $@ -a canyonlands powerpc ppc4xx canyonlands amcc
-
-CATcenter_config	\
-CATcenter_25_config	\
-CATcenter_33_config:	unconfig
-	@mkdir -p $(obj)include
-	@echo "/* CATcenter uses PPChameleon Model ME */"  > $(obj)include/config.h
-	@echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >> $(obj)include/config.h
-	@[ -z "$(findstring _25,$@)" ] || \
-		echo "#define CONFIG_PPCHAMELEON_CLK_25" >> $(obj)include/config.h
-	@[ -z "$(findstring _33,$@)" ] || \
-		echo "#define CONFIG_PPCHAMELEON_CLK_33" >> $(obj)include/config.h
-	@$(MKCONFIG) -n $@ -a CATcenter powerpc ppc4xx PPChameleonEVB dave
-
-CPCI405_config		\
-CPCI4052_config		\
-CPCI405DT_config	\
-CPCI405AB_config:	unconfig
-	@mkdir -p $(obj)board/esd/cpci405
-	@$(MKCONFIG) -n $@ $@ powerpc ppc4xx cpci405 esd
-
-fx12mm_flash_config: unconfig
-	@mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
-	@mkdir -p $(obj)include $(obj)board/avnet/fx12mm
-	@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds"\
-		> $(obj)board/avnet/fx12mm/config.tmp
-	@echo "CONFIG_SYS_TEXT_BASE := 0xFFCB0000" \
-		>> $(obj)board/avnet/fx12mm/config.tmp
-	@$(MKCONFIG) fx12mm powerpc ppc4xx fx12mm avnet
-
-fx12mm_config: unconfig
-	@mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
-	@mkdir -p $(obj)include $(obj)board/avnet/fx12mm
-	@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds"\
-		> $(obj)board/avnet/fx12mm/config.tmp
-	@echo "CONFIG_SYS_TEXT_BASE := 0x03000000" \
-		>> $(obj)board/avnet/fx12mm/config.tmp
-	@$(MKCONFIG) fx12mm powerpc ppc4xx fx12mm avnet
-
-# Compact-Center(codename intip) & DevCon-Center use different U-Boot images
-intip_config \
-devconcenter_config:	unconfig
-	@mkdir -p $(obj)include
-	@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
-		tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
-	@$(MKCONFIG) -n $@ -a intip powerpc ppc4xx intip gdsys
-
-hcu4_config    \
-hcu5_config    \
-mcu25_config:  unconfig
-	@mkdir -p $(obj)board/netstal/common
-	@$(MKCONFIG) $@ powerpc ppc4xx $(call lcname,$@) netstal
-
-# Kilauea & Haleakala images are identical (recognized via PVR)
-kilauea_config \
-haleakala_config: unconfig
-	@$(MKCONFIG) -n $@ kilauea powerpc ppc4xx kilauea amcc
-
-kilauea_nand_config \
-haleakala_nand_config: unconfig
-	@mkdir -p $(obj)include $(obj)board/amcc/kilauea
-	@mkdir -p $(obj)nand_spl/board/amcc/kilauea
-	@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
-	@echo "CONFIG_SYS_TEXT_BASE = 0x01000000" > $(obj)board/amcc/kilauea/config.tmp
-	@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
-	@$(MKCONFIG) -n $@ -a kilauea powerpc ppc4xx kilauea amcc
-
-MIP405T_config:	unconfig
-	@mkdir -p $(obj)include
-	@echo "#define CONFIG_MIP405T" >$(obj)include/config.h
-	@$(XECHO) "Enable subset config for MIP405T"
-	@$(MKCONFIG) -a MIP405 powerpc ppc4xx mip405 mpl
-
-ml507_flash_config: unconfig
-	@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
-	@mkdir -p $(obj)include $(obj)board/xilinx/ml507
-	@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\
-		> $(obj)board/xilinx/ml507/config.tmp
-	@echo "CONFIG_SYS_TEXT_BASE := 0xFE360000" \
-		>> $(obj)board/xilinx/ml507/config.tmp
-	@$(MKCONFIG) ml507 powerpc ppc4xx ml507 xilinx
-
-ml507_config: unconfig
-	@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
-	@mkdir -p $(obj)include $(obj)board/xilinx/ml507
-	@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\
-		> $(obj)board/xilinx/ml507/config.tmp
-	@echo "CONFIG_SYS_TEXT_BASE := 0x04000000"  \
-		>> $(obj)board/xilinx/ml507/config.tmp
-	@$(MKCONFIG) $@ powerpc ppc4xx ml507 xilinx
-
-OCRTC_config		\
-ORSG_config:	unconfig
-	@$(MKCONFIG) -n $@ $@ powerpc ppc4xx ocrtc esd
-
-PPChameleonEVB_config		\
-PPChameleonEVB_BA_25_config	\
-PPChameleonEVB_ME_25_config	\
-PPChameleonEVB_HI_25_config	\
-PPChameleonEVB_BA_33_config	\
-PPChameleonEVB_ME_33_config	\
-PPChameleonEVB_HI_33_config:	unconfig
-	@mkdir -p $(obj)include
-	@[ -z "$(findstring EVB_BA,$@)" ] || \
-		echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 0" >>$(obj)include/config.h
-	@[ -z "$(findstring EVB_ME,$@)" ] || \
-		echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >>$(obj)include/config.h
-	@[ -z "$(findstring EVB_HI,$@)" ] || \
-		echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 2" >>$(obj)include/config.h
-	@[ -z "$(findstring _25,$@)" ] || \
-		echo "#define CONFIG_PPCHAMELEON_CLK_25" >>$(obj)include/config.h
-	@[ -z "$(findstring _33,$@)" ] || \
-		echo "#define CONFIG_PPCHAMELEON_CLK_33" >>$(obj)include/config.h
-	@$(MKCONFIG) -n $@ -a PPChameleonEVB powerpc ppc4xx PPChameleonEVB dave
-
-sequoia_config \
-rainier_config: unconfig
-	@mkdir -p $(obj)include
-	@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
-		tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
-	@$(MKCONFIG) -n $@ -a sequoia powerpc ppc4xx sequoia amcc
-
-sequoia_nand_config \
-rainier_nand_config: unconfig
-	@mkdir -p $(obj)include $(obj)board/amcc/sequoia
-	@mkdir -p $(obj)nand_spl/board/amcc/sequoia
-	@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
-	@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
-		tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
-	@echo "CONFIG_SYS_TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp
-	@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
-	@$(MKCONFIG) -n $@ -a sequoia powerpc ppc4xx sequoia amcc
-
-sequoia_ramboot_config \
-rainier_ramboot_config: unconfig
-	@mkdir -p $(obj)include $(obj)board/amcc/sequoia
-	@echo "#define CONFIG_SYS_RAMBOOT" > $(obj)include/config.h
-	@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
-		tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
-	@echo "CONFIG_SYS_TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp
-	@echo "LDSCRIPT = board/amcc/sequoia/u-boot-ram.lds" >> \
-		$(obj)board/amcc/sequoia/config.tmp
-	@$(MKCONFIG) -n $@ -a sequoia powerpc ppc4xx sequoia amcc
-
-v5fx30teval_config: unconfig
-	@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
-	@mkdir -p $(obj)include $(obj)board/avnet/v5fx30teval
-	@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\
-		> $(obj)board/avnet/v5fx30teval/config.tmp
-	@echo "CONFIG_SYS_TEXT_BASE := 0x03000000" \
-		>> $(obj)board/avnet/v5fx30teval/config.tmp
-	@$(MKCONFIG) $@ powerpc ppc4xx v5fx30teval avnet
-
-v5fx30teval_flash_config: unconfig
-	@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
-	@mkdir -p $(obj)include $(obj)board/avnet/v5fx30teval
-	@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\
-		> $(obj)board/avnet/v5fx30teval/config.tmp
-	@echo "CONFIG_SYS_TEXT_BASE := 0xFF1C0000" \
-		>> $(obj)board/avnet/v5fx30teval/config.tmp
-	@$(MKCONFIG) v5fx30teval powerpc ppc4xx v5fx30teval avnet
-
-W7OLMC_config	\
-W7OLMG_config: unconfig
-	@$(MKCONFIG) $@ powerpc ppc4xx w7o
-
-# Walnut & Sycamore images are identical (recognized via PVR)
-walnut_config \
-sycamore_config: unconfig
-	@$(MKCONFIG) -n $@ walnut powerpc ppc4xx walnut amcc
-
-xilinx-ppc405-generic_flash_config: unconfig
-	@mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
-	@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds"\
-		> $(obj)board/xilinx/ppc405-generic/config.tmp
-	@echo "CONFIG_SYS_TEXT_BASE := 0xFE360000" \
-		>> $(obj)board/xilinx/ppc405-generic/config.tmp
-	@$(MKCONFIG) xilinx-ppc405-generic powerpc ppc4xx ppc405-generic xilinx
-
-xilinx-ppc405-generic_config: unconfig
-	@mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
-	@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds"\
-		> $(obj)board/xilinx/ppc405-generic/config.tmp
-	@echo "CONFIG_SYS_TEXT_BASE := 0x04000000" \
-		>> $(obj)board/xilinx/ppc405-generic/config.tmp
-	@$(MKCONFIG) xilinx-ppc405-generic powerpc ppc4xx ppc405-generic xilinx
-
-xilinx-ppc440-generic_flash_config: unconfig
-	@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
-	@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\
-		> $(obj)board/xilinx/ppc440-generic/config.tmp
-	@echo "CONFIG_SYS_TEXT_BASE := 0xFE360000" \
-		>> $(obj)board/xilinx/ppc440-generic/config.tmp
-	@$(MKCONFIG) xilinx-ppc440-generic powerpc ppc4xx ppc440-generic xilinx
-
-xilinx-ppc440-generic_config: unconfig
-	@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
-	@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\
-		> $(obj)board/xilinx/ppc440-generic/config.tmp
-	@echo "CONFIG_SYS_TEXT_BASE := 0x04000000" \
-		>> $(obj)board/xilinx/ppc440-generic/config.tmp
-	@$(MKCONFIG) xilinx-ppc440-generic powerpc ppc4xx ppc440-generic xilinx
-
-yosemite_config \
-yellowstone_config: unconfig
-	@mkdir -p $(obj)include
-	@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
-		tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
-	@$(MKCONFIG) -n $@ -a yosemite powerpc ppc4xx yosemite amcc
-
-#########################################################################
-## MPC824x Systems
-#########################################################################
-
-eXalion_config: unconfig
-	@$(MKCONFIG) $(@:_config=) powerpc mpc824x eXalion
-
-CPC45_config	\
-CPC45_ROMBOOT_config:	unconfig
-	@mkdir -p $(obj)include ;				\
-	if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
-		echo "CONFIG_BOOT_ROM = y" >> $(obj)include/config.mk ; \
-	else \
-		echo "CONFIG_BOOT_ROM = n" >> $(obj)include/config.mk ; \
-	fi; \
-	echo "export CONFIG_BOOT_ROM" >> $(obj)include/config.mk;
-	@$(MKCONFIG) -n $@ CPC45 powerpc mpc824x cpc45
-
-# HDLAN is broken ATM. Should be fixed as soon as hardware is available and as
-# time permits.
-#linkstation_HDLAN_config \
-# Remove this line when HDLAN is fixed
-linkstation_HGLAN_config: unconfig
-	@mkdir -p $(obj)include
-	@case $@ in \
-		*HGLAN*) echo "#define CONFIG_HGLAN 1" >$(obj)include/config.h; ;; \
-		*HDLAN*) echo "#define CONFIG_HLAN 1" >$(obj)include/config.h; ;; \
-	esac
-	@$(MKCONFIG) -n $@ -a linkstation powerpc mpc824x linkstation
-
-Sandpoint8240_config: unconfig
-	@$(MKCONFIG) $@ powerpc mpc824x sandpoint
-
-Sandpoint8245_config: unconfig
-	@$(MKCONFIG) $@ powerpc mpc824x sandpoint
-
-#########################################################################
-## MPC8260 Systems
-#########################################################################
-
-cogent_mpc8260_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) powerpc mpc8260 cogent
-
-CPU86_config	\
-CPU86_ROMBOOT_config: unconfig
-	@mkdir -p  $(obj)include ;				\
-	if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
-		echo "CONFIG_BOOT_ROM = y" >> $(obj)include/config.mk ; \
-	else \
-		echo "CONFIG_BOOT_ROM = n" >> $(obj)include/config.mk ; \
-	fi; \
-	echo "export CONFIG_BOOT_ROM" >> $(obj)include/config.mk;
-	@$(MKCONFIG) -n $@ CPU86 powerpc mpc8260 cpu86
-
-CPU87_config	\
-CPU87_ROMBOOT_config: unconfig
-	@mkdir -p $(obj)include ;				\
-	if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
-		echo "CONFIG_BOOT_ROM = y" >> $(obj)include/config.mk ; \
-	else \
-		echo "CONFIG_BOOT_ROM = n" >> $(obj)include/config.mk ; \
-	fi; \
-	echo "export CONFIG_BOOT_ROM" >> $(obj)include/config.mk;
-	@$(MKCONFIG) -n $@ CPU87 powerpc mpc8260 cpu87
-
-ep8248_config	\
-ep8248E_config	:	unconfig
-	@$(MKCONFIG) -n $@ ep8248 powerpc mpc8260 ep8248
-
-ISPAN_config		\
-ISPAN_REVB_config:	unconfig
-	@mkdir -p $(obj)include
-	@if [ "$(findstring _REVB_,$@)" ] ; then \
-		echo "#define CONFIG_SYS_REV_B" > $(obj)include/config.h ; \
-	fi
-	@$(MKCONFIG) -n $@ -a ISPAN powerpc mpc8260 ispan
-
-MPC8260ADS_config	\
-MPC8260ADS_lowboot_config	\
-MPC8260ADS_33MHz_config	\
-MPC8260ADS_33MHz_lowboot_config	\
-MPC8260ADS_40MHz_config	\
-MPC8260ADS_40MHz_lowboot_config	\
-MPC8272ADS_config	\
-MPC8272ADS_lowboot_config	\
-PQ2FADS_config		\
-PQ2FADS_lowboot_config		\
-PQ2FADS-VR_config	\
-PQ2FADS-VR_lowboot_config	\
-PQ2FADS-ZU_config	\
-PQ2FADS-ZU_lowboot_config	\
-PQ2FADS-ZU_66MHz_config	\
-PQ2FADS-ZU_66MHz_lowboot_config	\
-	:		unconfig
-	@mkdir -p $(obj)include
-	@mkdir -p $(obj)board/freescale/mpc8260ads
-	$(if $(findstring PQ2FADS,$@), \
-	@echo "#define CONFIG_ADSTYPE CONFIG_SYS_PQ2FADS" > $(obj)include/config.h, \
-	@echo "#define CONFIG_ADSTYPE CONFIG_SYS_"$(subst MPC,,$(word 1,$(subst _, ,$@))) > $(obj)include/config.h)
-	$(if $(findstring MHz,$@), \
-	@echo "#define CONFIG_8260_CLKIN" $(subst MHz,,$(word 2,$(subst _, ,$@)))"000000" >> $(obj)include/config.h, \
-	$(if $(findstring VR,$@), \
-	@echo "#define CONFIG_8260_CLKIN 66000000" >> $(obj)include/config.h))
-	@[ -z "$(findstring lowboot_,$@)" ] || \
-		echo "CONFIG_SYS_TEXT_BASE = 0xFF800000" >$(obj)board/freescale/mpc8260ads/config.tmp
-	@$(MKCONFIG) -n $@ -a MPC8260ADS powerpc mpc8260 mpc8260ads freescale
-
-muas3001_dev_config \
-muas3001_config	:	unconfig
-	@mkdir -p $(obj)include
-	@mkdir -p $(obj)board/muas3001
-	@if [ "$(findstring dev,$@)" ] ; then \
-		echo "#define CONFIG_MUAS_DEV_BOARD" > $(obj)include/config.h ; \
-	fi
-	@$(MKCONFIG) -n $@ -a muas3001 powerpc mpc8260 muas3001
-
-# PM825/PM826 default configuration:  small (= 8 MB) Flash / boot from 64-bit flash
-PM825_config	\
-PM825_ROMBOOT_config	\
-PM825_BIGFLASH_config	\
-PM825_ROMBOOT_BIGFLASH_config	\
-PM826_config	\
-PM826_ROMBOOT_config	\
-PM826_BIGFLASH_config	\
-PM826_ROMBOOT_BIGFLASH_config:	unconfig
-	@mkdir -p $(obj)include
-	@mkdir -p $(obj)board/pm826
-	@if [ "$(findstring PM825_,$@)" ] ; then \
-		echo "#define CONFIG_PCI"	>$(obj)include/config.h ; \
-	else \
-		>$(obj)include/config.h ; \
-	fi
-	@if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
-		echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
-		echo "CONFIG_SYS_TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \
-		if [ "$(findstring _BIGFLASH_,$@)" ] ; then \
-			echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \
-		fi; \
-	else \
-		if [ "$(findstring _BIGFLASH_,$@)" ] ; then \
-			$(XECHO) "... with 32 MB Flash" ; \
-			echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \
-			echo "CONFIG_SYS_TEXT_BASE = 0x40000000" >$(obj)board/pm826/config.tmp ; \
-		else \
-			echo "CONFIG_SYS_TEXT_BASE = 0xFF000000" >$(obj)board/pm826/config.tmp ; \
-		fi; \
-	fi
-	@$(MKCONFIG) -n $@ -a PM826 powerpc mpc8260 pm826
-
-PM828_config	\
-PM828_PCI_config	\
-PM828_ROMBOOT_config	\
-PM828_ROMBOOT_PCI_config:	unconfig
-	@mkdir -p $(obj)include
-	@mkdir -p $(obj)board/pm826
-	@if [ "$(findstring _PCI_,$@)" ] ; then \
-		echo "#define CONFIG_PCI"  >>$(obj)include/config.h ; \
-	fi
-	@if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
-		echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
-		echo "CONFIG_SYS_TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \
-	fi
-	@$(MKCONFIG) -n $@ -a PM828 powerpc mpc8260 pm828
-
-Rattler8248_config	\
-Rattler_config:		unconfig
-	@mkdir -p $(obj)include
-	$(if $(findstring 8248,$@), \
-		@echo "#define CONFIG_MPC8248" > $(obj)include/config.h)
-	@$(MKCONFIG) -n $@ -a Rattler powerpc mpc8260 rattler
-
-TQM8255_AA_config \
-TQM8260_AA_config \
-TQM8260_AB_config \
-TQM8260_AC_config \
-TQM8260_AD_config \
-TQM8260_AE_config \
-TQM8260_AF_config \
-TQM8260_AG_config \
-TQM8260_AH_config \
-TQM8260_AI_config \
-TQM8265_AA_config:  unconfig
-	@mkdir -p $(obj)include
-	@case "$@" in \
-	TQM8255_AA_config) CTYPE=MPC8255; CFREQ=300; CACHE=no;	BMODE=8260;;  \
-	TQM8260_AA_config) CTYPE=MPC8260; CFREQ=200; CACHE=no;	BMODE=8260;; \
-	TQM8260_AB_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes;	BMODE=60x;;  \
-	TQM8260_AC_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes;	BMODE=60x;;  \
-	TQM8260_AD_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;	BMODE=60x;;  \
-	TQM8260_AE_config) CTYPE=MPC8260; CFREQ=266; CACHE=no;	BMODE=8260;; \
-	TQM8260_AF_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;	BMODE=60x;;  \
-	TQM8260_AG_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;	BMODE=8260;; \
-	TQM8260_AH_config) CTYPE=MPC8260; CFREQ=300; CACHE=yes;	BMODE=60x;;  \
-	TQM8260_AI_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;	BMODE=60x;;  \
-	TQM8265_AA_config) CTYPE=MPC8265; CFREQ=300; CACHE=no;	BMODE=60x;;  \
-	esac; \
-	if [ "$${CTYPE}" != "MPC8260" ] ; then \
-		echo "#define CONFIG_$${CTYPE}"	>>$(obj)include/config.h ; \
-	fi; \
-	echo "#define CONFIG_$${CFREQ}MHz"	>>$(obj)include/config.h ; \
-	if [ "$${CACHE}" = "yes" ] ; then \
-		echo "#define CONFIG_L2_CACHE"	>>$(obj)include/config.h ; \
-	else \
-		echo "#undef CONFIG_L2_CACHE"	>>$(obj)include/config.h ; \
-	fi; \
-	if [ "$${BMODE}" = "60x" ] ; then \
-		echo "#define CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \
-	else \
-		echo "#undef CONFIG_BUSMODE_60x"  >>$(obj)include/config.h ; \
-	fi
-	@$(MKCONFIG) -n $@ -a TQM8260 powerpc mpc8260 tqm8260 tqc
-
-VoVPN-GW_66MHz_config	\
-VoVPN-GW_100MHz_config:		unconfig
-	@mkdir -p $(obj)include
-	@echo "#define CONFIG_CLKIN_$(word 2,$(subst _, ,$@))" > $(obj)include/config.h
-	@$(MKCONFIG) -n $@ -a VoVPN-GW powerpc mpc8260 vovpn-gw funkwerk
-
 #########################################################################
 ## Coldfire
 #########################################################################
@@ -1585,299 +709,6 @@ M5485HFE_config :	unconfig
 	fi
 	@$(MKCONFIG) -n $@ -a M5485EVB m68k mcf547x_8x m548xevb freescale
 
-#########################################################################
-## MPC83xx Systems
-#########################################################################
-
-MPC8313ERDB_33_config \
-MPC8313ERDB_66_config \
-MPC8313ERDB_NAND_33_config \
-MPC8313ERDB_NAND_66_config: unconfig
-	@mkdir -p $(obj)include
-	@mkdir -p $(obj)board/freescale/mpc8313erdb
-	@if [ "$(findstring _33_,$@)" ] ; then \
-		echo "#define CONFIG_SYS_33MHZ" >>$(obj)include/config.h ; \
-	fi ; \
-	if [ "$(findstring _66_,$@)" ] ; then \
-		echo "#define CONFIG_SYS_66MHZ" >>$(obj)include/config.h ; \
-	fi ; \
-	if [ "$(findstring _NAND_,$@)" ] ; then \
-		echo "CONFIG_SYS_TEXT_BASE = 0x00100000" > $(obj)board/freescale/mpc8313erdb/config.tmp ; \
-		echo "#define CONFIG_NAND_U_BOOT" >>$(obj)include/config.h ; \
-	fi ;
-	@if [ "$(findstring _NAND_,$@)" ] ; then \
-		echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk ; \
-	fi ;
-	@$(MKCONFIG) -n $@ -a MPC8313ERDB powerpc mpc83xx mpc8313erdb freescale
-
-MPC8315ERDB_NAND_config \
-MPC8315ERDB_config: unconfig
-	@$(MKCONFIG) -n $@ -t $@ MPC8315ERDB powerpc mpc83xx mpc8315erdb freescale
-
-MPC832XEMDS_config \
-MPC832XEMDS_HOST_33_config \
-MPC832XEMDS_HOST_66_config \
-MPC832XEMDS_SLAVE_config \
-MPC832XEMDS_ATM_config:	unconfig
-	@mkdir -p $(obj)include
-	@if [ "$(findstring _HOST_,$@)" ] ; then \
-		echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
-	fi ; \
-	if [ "$(findstring _SLAVE_,$@)" ] ; then \
-		echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
-		echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \
-	fi ; \
-	if [ "$(findstring _33_,$@)" ] ; then \
-		echo "#define PCI_33M" >>$(obj)include/config.h ; \
-		echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
-	fi ; \
-	if [ "$(findstring _66_,$@)" ] ; then \
-		echo "#define PCI_66M" >>$(obj)include/config.h ; \
-		echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
-	fi ; \
-	if [ "$(findstring _ATM_,$@)" ] ; then \
-		echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
-		echo "#define CONFIG_PQ_MDS_PIB_ATM	1" >>$(obj)include/config.h ; \
-	fi ;
-	@$(MKCONFIG) -n $@ -a MPC832XEMDS powerpc mpc83xx mpc832xemds freescale
-
-MPC8349ITX_config \
-MPC8349ITX_LOWBOOT_config \
-MPC8349ITXGP_config:	unconfig
-	@mkdir -p $(obj)include
-	@mkdir -p $(obj)board/freescale/mpc8349itx
-	@echo "#define CONFIG_$(subst _LOWBOOT,,$(@:_config=))" >> $(obj)include/config.h
-	@if [ "$(findstring GP,$@)" ] ; then \
-		echo "CONFIG_SYS_TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \
-	fi
-	@if [ "$(findstring LOWBOOT,$@)" ] ; then \
-		echo "CONFIG_SYS_TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \
-	fi
-	@$(MKCONFIG) -n $@ -a MPC8349ITX powerpc mpc83xx mpc8349itx freescale
-
-MPC8360EMDS_config \
-MPC8360EMDS_HOST_33_config \
-MPC8360EMDS_HOST_66_config \
-MPC8360EMDS_SLAVE_config \
-MPC8360EMDS_ATM_config: unconfig
-	@mkdir -p $(obj)include
-	@if [ "$(findstring _HOST_,$@)" ] ; then \
-		echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
-	fi ; \
-	if [ "$(findstring _SLAVE_,$@)" ] ; then \
-		echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
-		echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \
-	fi ; \
-	if [ "$(findstring _33_,$@)" ] ; then \
-		echo "#define PCI_33M" >>$(obj)include/config.h ; \
-		echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
-	fi ; \
-	if [ "$(findstring _66_,$@)" ] ; then \
-		echo "#define PCI_66M" >>$(obj)include/config.h ; \
-		echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
-	fi ; \
-	if [ "$(findstring _ATM_,$@)" ] ; then \
-		echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
-		echo "#define CONFIG_PQ_MDS_PIB_ATM	1" >>$(obj)include/config.h ; \
-	fi ;
-	@$(MKCONFIG) -n $@ -a MPC8360EMDS powerpc mpc83xx mpc8360emds freescale
-
-MPC8360ERDK_33_config \
-MPC8360ERDK_66_config \
-MPC8360ERDK_config:	unconfig
-	@mkdir -p $(obj)include
-	@if [ "$(findstring _33_,$@)" ] ; then \
-		echo "#define CONFIG_CLKIN_33MHZ" >>$(obj)include/config.h ;\
-	fi ;
-	@$(MKCONFIG) -n $@ -a MPC8360ERDK powerpc mpc83xx mpc8360erdk freescale
-
-MPC837XEMDS_config \
-MPC837XEMDS_HOST_config:	unconfig
-	@mkdir -p $(obj)include
-	@if [ "$(findstring _HOST_,$@)" ] ; then \
-		echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
-	fi ;
-	@$(MKCONFIG) -n $@ -a MPC837XEMDS powerpc mpc83xx mpc837xemds freescale
-
-sbc8349_config \
-sbc8349_PCI_33_config \
-sbc8349_PCI_66_config: unconfig
-	@$(MKCONFIG) -n $@ -t $@ sbc8349 powerpc mpc83xx sbc8349
-
-SIMPC8313_LP_config \
-SIMPC8313_SP_config: unconfig
-	@mkdir -p $(obj)include
-	@mkdir -p $(obj)board/sheldon/simpc8313
-	@if [ "$(findstring _LP_,$@)" ] ; then \
-		echo "#define CONFIG_NAND_LP" >> $(obj)include/config.h ; \
-	fi ; \
-	if [ "$(findstring _SP_,$@)" ] ; then \
-		echo "#define CONFIG_NAND_SP" >> $(obj)include/config.h ; \
-	fi ;
-	@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
-	@$(MKCONFIG) -n $@ -a SIMPC8313 powerpc mpc83xx simpc8313 sheldon
-
-caddy2_config \
-vme8349_config:		unconfig
-	@$(MKCONFIG) -n $@ -t $@ vme8349 powerpc mpc83xx vme8349 esd
-
-#########################################################################
-## MPC85xx Systems
-#########################################################################
-
-MPC8536DS_NAND_config \
-MPC8536DS_SDCARD_config \
-MPC8536DS_SPIFLASH_config \
-MPC8536DS_36BIT_config \
-MPC8536DS_config:       unconfig
-	@$(MKCONFIG) -n $@ -t $@ MPC8536DS powerpc mpc85xx mpc8536ds freescale
-
-MPC8540EVAL_config \
-MPC8540EVAL_33_config \
-MPC8540EVAL_66_config \
-MPC8540EVAL_33_slave_config \
-MPC8540EVAL_66_slave_config:	unconfig
-	@mkdir -p $(obj)include
-	@if [ -z "$(findstring _33_,$@)" ] ; then \
-		echo "#define CONFIG_SYSCLK_66M" >>$(obj)include/config.h ; \
-	fi ; \
-	if [ "$(findstring _slave_,$@)" ] ; then \
-		echo "#define CONFIG_PCI_SLAVE" >>$(obj)include/config.h ; \
-	fi
-	@$(MKCONFIG) -n $@ -a MPC8540EVAL powerpc mpc85xx mpc8540eval
-
-MPC8541CDS_legacy_config \
-MPC8541CDS_config:	unconfig
-	@mkdir -p $(obj)include
-	@if [ "$(findstring _legacy_,$@)" ] ; then \
-		echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
-	fi
-	@$(MKCONFIG) -n $@ -a MPC8541CDS powerpc mpc85xx mpc8541cds freescale
-
-MPC8548CDS_legacy_config \
-MPC8548CDS_config:	unconfig
-	@mkdir -p $(obj)include
-	@if [ "$(findstring _legacy_,$@)" ] ; then \
-		echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
-	fi
-	@$(MKCONFIG) -n $@ -a MPC8548CDS powerpc mpc85xx mpc8548cds freescale
-
-MPC8555CDS_legacy_config \
-MPC8555CDS_config:	unconfig
-	@mkdir -p $(obj)include
-	@if [ "$(findstring _legacy_,$@)" ] ; then \
-		echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
-	fi
-	@$(MKCONFIG) -n $@ -a MPC8555CDS powerpc mpc85xx mpc8555cds freescale
-
-MPC8569MDS_ATM_config \
-MPC8569MDS_NAND_config \
-MPC8569MDS_config:	unconfig
-	@$(MKCONFIG) -n $@ -t $@ MPC8569MDS powerpc mpc85xx mpc8569mds freescale
-
-MPC8572DS_36BIT_config \
-MPC8572DS_config:       unconfig
-	@$(MKCONFIG) -n $@ -t $@ MPC8572DS powerpc mpc85xx mpc8572ds freescale
-
-P2020DS_36BIT_config \
-P2020DS_config:		unconfig
-	@$(MKCONFIG) -n $@ -t $@ P2020DS powerpc mpc85xx p2020ds freescale
-
-P1011RDB_config	\
-P1011RDB_NAND_config \
-P1011RDB_SDCARD_config \
-P1011RDB_SPIFLASH_config \
-P1020RDB_config	\
-P1020RDB_NAND_config \
-P1020RDB_SDCARD_config \
-P1020RDB_SPIFLASH_config \
-P2010RDB_config \
-P2010RDB_NAND_config \
-P2010RDB_SDCARD_config \
-P2010RDB_SPIFLASH_config \
-P2020DS_DDR2_config \
-P2020RDB_config \
-P2020RDB_NAND_config \
-P2020RDB_SDCARD_config \
-P2020RDB_SPIFLASH_config:	unconfig
-	@$(MKCONFIG) -n $@ -t $@ P1_P2_RDB powerpc mpc85xx p1_p2_rdb freescale
-
-sbc8540_config \
-sbc8540_33_config \
-sbc8540_66_config:	unconfig
-	@$(MKCONFIG) -n $@ -t $@ SBC8540 powerpc mpc85xx sbc8560
-
-sbc8548_config \
-sbc8548_PCI_33_config \
-sbc8548_PCI_66_config \
-sbc8548_PCI_33_PCIE_config \
-sbc8548_PCI_66_PCIE_config: unconfig
-	@$(MKCONFIG) -n $@ -t $@ sbc8548 powerpc mpc85xx sbc8548
-
-sbc8560_config \
-sbc8560_33_config \
-sbc8560_66_config:	unconfig
-	@$(MKCONFIG) -n $@ -t $@ sbc8560 powerpc mpc85xx sbc8560
-
-stxssa_config		\
-stxssa_4M_config:	unconfig
-	@mkdir -p $(obj)include
-	@if [ "$(findstring _4M_,$@)" ] ; then \
-		echo "#define CONFIG_STXSSA_4M" >>$(obj)include/config.h ; \
-	fi
-	@$(MKCONFIG) -n $@ -a stxssa powerpc mpc85xx stxssa stx
-
-TQM8540_config		\
-TQM8541_config		\
-TQM8548_config		\
-TQM8548_AG_config	\
-TQM8548_BE_config	\
-TQM8555_config		\
-TQM8560_config:		unconfig
-	@mkdir -p $(obj)include
-	@BTYPE=$(@:_config=); \
-	CTYPE=$(subst TQM,,$(subst _AG,,$(subst _BE,,$(@:_config=)))); \
-	echo "#define CONFIG_MPC$${CTYPE}">>$(obj)include/config.h; \
-	echo "#define CONFIG_$${BTYPE}">>$(obj)include/config.h; \
-	echo "#define CONFIG_HOSTNAME tqm$${CTYPE}">>$(obj)include/config.h; \
-	echo "#define CONFIG_BOARDNAME \"$${BTYPE}\"">>$(obj)include/config.h;
-	@echo "CONFIG_$(@:_config=) = y">>$(obj)include/config.mk;
-	@$(MKCONFIG) -n $@ -a TQM85xx powerpc mpc85xx tqm85xx tqc
-
-#########################################################################
-## MPC86xx Systems
-#########################################################################
-
-MPC8641HPCN_36BIT_config \
-MPC8641HPCN_config:    unconfig
-	@mkdir -p $(obj)include
-	@if [ "$(findstring _36BIT_,$@)" ] ; then \
-		echo "#define CONFIG_PHYS_64BIT" >>$(obj)include/config.h ; \
-	fi
-	@$(MKCONFIG) -n $@ -a MPC8641HPCN powerpc mpc86xx mpc8641hpcn freescale
-
-#########################################################################
-## 74xx/7xx Systems
-#########################################################################
-
-EVB64260_config	\
-EVB64260_750CX_config:	unconfig
-	@$(MKCONFIG) -n $@ EVB64260 powerpc 74xx_7xx evb64260
-
-p3m750_config	\
-p3m7448_config:		unconfig
-	@mkdir -p $(obj)include
-	@if [ "$(findstring 750_,$@)" ] ; then \
-		echo "#define CONFIG_P3M750" >>$(obj)include/config.h ; \
-	else \
-		echo "#define CONFIG_P3M7448" >>$(obj)include/config.h ; \
-	fi
-	@$(MKCONFIG) -n $@ -a p3mx powerpc 74xx_7xx p3mx prodrive
-
-PCIPPC2_config \
-PCIPPC6_config: unconfig
-	@$(MKCONFIG) -n $@ $@ powerpc 74xx_7xx pcippc2
-
 #========================================================================
 # ARM
 #========================================================================