stm32: add support for stm32f7 & stm32f746 discovery board

This patch adds support for stm32f7 family & stm32f746 board.

Signed-off-by: Vikas Manocha <vikas.manocha@st.com>

19 files changed, 768 insertions, 3 deletions

diff --git a/arch/arm/include/asm/arch-stm32f7/gpio.h b/arch/arm/include/asm/arch-stm32f7/gpio.h
new file mode 100644
index 0000000000..2942cd923c
--- /dev/null
+++ b/arch/arm/include/asm/arch-stm32f7/gpio.h
@@ -0,0 +1,113 @@
+/*
+ * (C) Copyright 2016
+ * Vikas Manocha, <vikas.manocha@st.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _STM32_GPIO_H_
+#define _STM32_GPIO_H_
+
+enum stm32_gpio_port {
+	STM32_GPIO_PORT_A = 0,
+	STM32_GPIO_PORT_B,
+	STM32_GPIO_PORT_C,
+	STM32_GPIO_PORT_D,
+	STM32_GPIO_PORT_E,
+	STM32_GPIO_PORT_F,
+	STM32_GPIO_PORT_G,
+	STM32_GPIO_PORT_H,
+	STM32_GPIO_PORT_I
+};
+
+enum stm32_gpio_pin {
+	STM32_GPIO_PIN_0 = 0,
+	STM32_GPIO_PIN_1,
+	STM32_GPIO_PIN_2,
+	STM32_GPIO_PIN_3,
+	STM32_GPIO_PIN_4,
+	STM32_GPIO_PIN_5,
+	STM32_GPIO_PIN_6,
+	STM32_GPIO_PIN_7,
+	STM32_GPIO_PIN_8,
+	STM32_GPIO_PIN_9,
+	STM32_GPIO_PIN_10,
+	STM32_GPIO_PIN_11,
+	STM32_GPIO_PIN_12,
+	STM32_GPIO_PIN_13,
+	STM32_GPIO_PIN_14,
+	STM32_GPIO_PIN_15
+};
+
+enum stm32_gpio_mode {
+	STM32_GPIO_MODE_IN = 0,
+	STM32_GPIO_MODE_OUT,
+	STM32_GPIO_MODE_AF,
+	STM32_GPIO_MODE_AN
+};
+
+enum stm32_gpio_otype {
+	STM32_GPIO_OTYPE_PP = 0,
+	STM32_GPIO_OTYPE_OD
+};
+
+enum stm32_gpio_speed {
+	STM32_GPIO_SPEED_2M = 0,
+	STM32_GPIO_SPEED_25M,
+	STM32_GPIO_SPEED_50M,
+	STM32_GPIO_SPEED_100M
+};
+
+enum stm32_gpio_pupd {
+	STM32_GPIO_PUPD_NO = 0,
+	STM32_GPIO_PUPD_UP,
+	STM32_GPIO_PUPD_DOWN
+};
+
+enum stm32_gpio_af {
+	STM32_GPIO_AF0 = 0,
+	STM32_GPIO_AF1,
+	STM32_GPIO_AF2,
+	STM32_GPIO_AF3,
+	STM32_GPIO_AF4,
+	STM32_GPIO_AF5,
+	STM32_GPIO_AF6,
+	STM32_GPIO_AF7,
+	STM32_GPIO_AF8,
+	STM32_GPIO_AF9,
+	STM32_GPIO_AF10,
+	STM32_GPIO_AF11,
+	STM32_GPIO_AF12,
+	STM32_GPIO_AF13,
+	STM32_GPIO_AF14,
+	STM32_GPIO_AF15
+};
+
+struct stm32_gpio_dsc {
+	enum stm32_gpio_port	port;
+	enum stm32_gpio_pin	pin;
+};
+
+struct stm32_gpio_ctl {
+	enum stm32_gpio_mode	mode;
+	enum stm32_gpio_otype	otype;
+	enum stm32_gpio_speed	speed;
+	enum stm32_gpio_pupd	pupd;
+	enum stm32_gpio_af	af;
+};
+
+static inline unsigned stm32_gpio_to_port(unsigned gpio)
+{
+	return gpio / 16;
+}
+
+static inline unsigned stm32_gpio_to_pin(unsigned gpio)
+{
+	return gpio % 16;
+}
+
+int stm32_gpio_config(const struct stm32_gpio_dsc *gpio_dsc,
+		const struct stm32_gpio_ctl *gpio_ctl);
+int stm32_gpout_set(const struct stm32_gpio_dsc *gpio_dsc, int state);
+
+#endif /* _STM32_GPIO_H_ */
diff --git a/arch/arm/include/asm/arch-stm32f7/gpt.h b/arch/arm/include/asm/arch-stm32f7/gpt.h
new file mode 100644
index 0000000000..903bdf6314
--- /dev/null
+++ b/arch/arm/include/asm/arch-stm32f7/gpt.h
@@ -0,0 +1,53 @@
+/*
+ * (C) Copyright 2016
+ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _STM32_GPT_H
+#define _STM32_GPT_H
+
+#include <asm/arch/stm32.h>
+
+struct gpt_regs {
+	u32 cr1;
+	u32 cr2;
+	u32 smcr;
+	u32 dier;
+	u32 sr;
+	u32 egr;
+	u32 ccmr1;
+	u32 ccmr2;
+	u32 ccer;
+	u32 cnt;
+	u32 psc;
+	u32 arr;
+	u32 reserved;
+	u32 ccr1;
+	u32 ccr2;
+	u32 ccr3;
+	u32 ccr4;
+	u32 reserved1;
+	u32 dcr;
+	u32 dmar;
+	u32 tim2_5_or;
+};
+
+struct gpt_regs *const gpt1_regs_ptr =
+	(struct gpt_regs *)TIM2_BASE;
+
+/* Timer control1 register  */
+#define GPT_CR1_CEN			0x0001
+#define GPT_MODE_AUTO_RELOAD		(1 << 7)
+
+/* Auto reload register for free running config */
+#define GPT_FREE_RUNNING		0xFFFFFFFF
+
+/* Timer, HZ specific defines */
+#define CONFIG_STM32_HZ			1000
+
+/* Timer Event Generation registers */
+#define TIM_EGR_UG			(1 << 0)
+
+#endif
diff --git a/arch/arm/include/asm/arch-stm32f7/rcc.h b/arch/arm/include/asm/arch-stm32f7/rcc.h
new file mode 100644
index 0000000000..8bfb7b6628
--- /dev/null
+++ b/arch/arm/include/asm/arch-stm32f7/rcc.h
@@ -0,0 +1,64 @@
+/*
+ * (C) Copyright 2016
+ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _STM32_RCC_H
+#define _STM32_RCC_H
+
+#define RCC_CR		0x00	/* clock control */
+#define RCC_PLLCFGR	0x04	/* PLL configuration */
+#define RCC_CFGR	0x08	/* clock configuration */
+#define RCC_CIR		0x0C	/* clock interrupt */
+#define RCC_AHB1RSTR	0x10	/* AHB1 peripheral reset */
+#define RCC_AHB2RSTR	0x14	/* AHB2 peripheral reset */
+#define RCC_AHB3RSTR	0x18	/* AHB3 peripheral reset */
+#define RCC_APB1RSTR	0x20	/* APB1 peripheral reset */
+#define RCC_APB2RSTR	0x24	/* APB2 peripheral reset */
+#define RCC_AHB1ENR	0x30	/* AHB1 peripheral clock enable */
+#define RCC_AHB2ENR	0x34	/* AHB2 peripheral clock enable */
+#define RCC_AHB3ENR	0x38	/* AHB3 peripheral clock enable */
+#define RCC_APB1ENR	0x40	/* APB1 peripheral clock enable */
+#define RCC_APB2ENR	0x44	/* APB2 peripheral clock enable */
+#define RCC_AHB1LPENR	0x50	/* periph clk enable in low pwr mode */
+#define RCC_AHB2LPENR	0x54	/* AHB2 periph clk enable in low pwr mode */
+#define RCC_AHB3LPENR	0x58	/* AHB3 periph clk enable in low pwr mode */
+#define RCC_APB1LPENR	0x60	/* APB1 periph clk enable in low pwr mode */
+#define RCC_APB2LPENR	0x64	/* APB2 periph clk enable in low pwr mode */
+#define RCC_BDCR	0x70	/* Backup domain control */
+#define RCC_CSR		0x74	/* clock control & status */
+#define RCC_SSCGR	0x80	/* spread spectrum clock generation */
+#define RCC_PLLI2SCFGR	0x84	/* PLLI2S configuration */
+#define RCC_PLLSAICFG	0x88	/* PLLSAI configuration */
+#define RCC_DCKCFG1	0x8C	/* dedicated clocks configuration register */
+#define RCC_DCKCFG2	0x90	/* dedicated clocks configuration register */
+
+#define RCC_APB1ENR_TIM2EN		(1 << 0)
+#define RCC_APB1ENR_PWREN		(1 << 28)
+
+/*
+ * RCC USART specific definitions
+ */
+#define RCC_ENR_USART1EN		(1 << 4)
+#define RCC_ENR_USART2EN		(1 << 17)
+#define RCC_ENR_USART3EN		(1 << 18)
+#define RCC_ENR_USART6EN		(1 <<  5)
+
+/*
+ * RCC GPIO specific definitions
+ */
+#define RCC_ENR_GPIO_A_EN		(1 << 0)
+#define RCC_ENR_GPIO_B_EN		(1 << 1)
+#define RCC_ENR_GPIO_C_EN		(1 << 2)
+#define RCC_ENR_GPIO_D_EN		(1 << 3)
+#define RCC_ENR_GPIO_E_EN		(1 << 4)
+#define RCC_ENR_GPIO_F_EN		(1 << 5)
+#define RCC_ENR_GPIO_G_EN		(1 << 6)
+#define RCC_ENR_GPIO_H_EN		(1 << 7)
+#define RCC_ENR_GPIO_I_EN		(1 << 8)
+#define RCC_ENR_GPIO_J_EN		(1 << 9)
+#define RCC_ENR_GPIO_K_EN		(1 << 10)
+
+#endif
diff --git a/arch/arm/include/asm/arch-stm32f7/stm32.h b/arch/arm/include/asm/arch-stm32f7/stm32.h
new file mode 100644
index 0000000000..713eb2e8cf
--- /dev/null
+++ b/arch/arm/include/asm/arch-stm32f7/stm32.h
@@ -0,0 +1,63 @@
+/*
+ * (C) Copyright 2016
+ * Vikas Manocha, STMicroelectronics, <vikas.manocha@st.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _ASM_ARCH_HARDWARE_H
+#define _ASM_ARCH_HARDWARE_H
+
+/* STM32F746 */
+#define ITCM_FLASH_BASE		0x00200000UL
+#define AXIM_FLASH_BASE		0x08000000UL
+
+#define ITCM_SRAM_BASE		0x00000000UL
+#define DTCM_SRAM_BASE		0x20000000UL
+#define SRAM1_BASE		0x20010000UL
+#define SRAM2_BASE		0x2004C000UL
+
+#define PERIPH_BASE		0x40000000UL
+
+#define APB1_PERIPH_BASE	(PERIPH_BASE + 0x00000000)
+#define APB2_PERIPH_BASE	(PERIPH_BASE + 0x00010000)
+#define AHB1_PERIPH_BASE	(PERIPH_BASE + 0x00020000)
+#define AHB2_PERIPH_BASE	(PERIPH_BASE + 0x10000000)
+#define AHB3_PERIPH_BASE	(PERIPH_BASE + 0x20000000)
+
+#define TIM2_BASE		(APB1_PERIPH_BASE + 0x0000)
+#define USART2_BASE		(APB1_PERIPH_BASE + 0x4400)
+#define USART3_BASE		(APB1_PERIPH_BASE + 0x4800)
+#define PWR_BASE		(APB1_PERIPH_BASE + 0x7000)
+
+#define USART1_BASE		(APB2_PERIPH_BASE + 0x1000)
+#define USART6_BASE		(APB2_PERIPH_BASE + 0x1400)
+
+#define STM32_GPIOA_BASE	(AHB1_PERIPH_BASE + 0x0000)
+#define STM32_GPIOB_BASE	(AHB1_PERIPH_BASE + 0x0400)
+#define STM32_GPIOC_BASE	(AHB1_PERIPH_BASE + 0x0800)
+#define STM32_GPIOD_BASE	(AHB1_PERIPH_BASE + 0x0C00)
+#define STM32_GPIOE_BASE	(AHB1_PERIPH_BASE + 0x1000)
+#define STM32_GPIOF_BASE	(AHB1_PERIPH_BASE + 0x1400)
+#define STM32_GPIOG_BASE	(AHB1_PERIPH_BASE + 0x1800)
+#define STM32_GPIOH_BASE	(AHB1_PERIPH_BASE + 0x1C00)
+#define STM32_GPIOI_BASE	(AHB1_PERIPH_BASE + 0x2000)
+#define STM32_GPIOJ_BASE	(AHB1_PERIPH_BASE + 0x2400)
+#define STM32_GPIOK_BASE	(AHB1_PERIPH_BASE + 0x2800)
+#define RCC_BASE		(AHB1_PERIPH_BASE + 0x3800)
+#define FLASH_CNTL_BASE		(AHB1_PERIPH_BASE + 0x3C00)
+
+
+#define SDRAM_FMC_BASE		(AHB3_PERIPH_BASE + 0x4A0000140)
+
+enum clock {
+	CLOCK_CORE,
+	CLOCK_AHB,
+	CLOCK_APB1,
+	CLOCK_APB2
+};
+#define STM32_BUS_MASK          0xFFFF0000
+
+int configure_clocks(void);
+
+#endif /* _ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/include/asm/arch-stm32f7/stm32_defs.h b/arch/arm/include/asm/arch-stm32f7/stm32_defs.h
new file mode 100644
index 0000000000..29b98aecf4
--- /dev/null
+++ b/arch/arm/include/asm/arch-stm32f7/stm32_defs.h
@@ -0,0 +1,15 @@
+/*
+ * (C) Copyright 2016
+ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __STM32_DEFS_H__
+#define __STM32_DEFS_H__
+#include <asm/arch/stm32_periph.h>
+
+int clock_setup(enum periph_clock);
+
+#endif
+
diff --git a/arch/arm/include/asm/arch-stm32f7/stm32_periph.h b/arch/arm/include/asm/arch-stm32f7/stm32_periph.h
new file mode 100644
index 0000000000..38adc4e0e2
--- /dev/null
+++ b/arch/arm/include/asm/arch-stm32f7/stm32_periph.h
@@ -0,0 +1,38 @@
+/*
+ * (C) Copyright 2016
+ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __ASM_ARM_ARCH_PERIPH_H
+#define __ASM_ARM_ARCH_PERIPH_H
+
+/*
+ * Peripherals required for pinmux configuration. List will
+ * grow with support for more devices getting added.
+ * Numbering based on interrupt table.
+ *
+ */
+enum periph_id {
+	UART1_GPIOA_9_10 = 0,
+	UART2_GPIOD_5_6,
+};
+
+enum periph_clock {
+	USART1_CLOCK_CFG = 0,
+	USART2_CLOCK_CFG,
+	GPIO_A_CLOCK_CFG,
+	GPIO_B_CLOCK_CFG,
+	GPIO_C_CLOCK_CFG,
+	GPIO_D_CLOCK_CFG,
+	GPIO_E_CLOCK_CFG,
+	GPIO_F_CLOCK_CFG,
+	GPIO_G_CLOCK_CFG,
+	GPIO_H_CLOCK_CFG,
+	GPIO_I_CLOCK_CFG,
+	GPIO_J_CLOCK_CFG,
+	GPIO_K_CLOCK_CFG,
+};
+
+#endif /* __ASM_ARM_ARCH_PERIPH_H */
diff --git a/arch/arm/mach-stm32/Kconfig b/arch/arm/mach-stm32/Kconfig
index 7dbeb040d5..ec6b3ff2df 100644
--- a/arch/arm/mach-stm32/Kconfig
+++ b/arch/arm/mach-stm32/Kconfig
@@ -6,7 +6,11 @@ config STM32F4
 config STM32F1
 	bool "stm32f1 family"
 
+config STM32F7
+	bool "stm32f7 family"
+
 source "arch/arm/mach-stm32/stm32f4/Kconfig"
 source "arch/arm/mach-stm32/stm32f1/Kconfig"
+source "arch/arm/mach-stm32/stm32f7/Kconfig"
 
 endif
diff --git a/arch/arm/mach-stm32/Makefile b/arch/arm/mach-stm32/Makefile
index ea06034e10..ffc537f35b 100644
--- a/arch/arm/mach-stm32/Makefile
+++ b/arch/arm/mach-stm32/Makefile
@@ -7,3 +7,4 @@
 
 obj-$(CONFIG_STM32F1) += stm32f1/
 obj-$(CONFIG_STM32F4) += stm32f4/
+obj-$(CONFIG_STM32F7) += stm32f7/
diff --git a/arch/arm/mach-stm32/stm32f7/Kconfig b/arch/arm/mach-stm32/stm32f7/Kconfig
new file mode 100644
index 0000000000..287e5ad4a0
--- /dev/null
+++ b/arch/arm/mach-stm32/stm32f7/Kconfig
@@ -0,0 +1,8 @@
+if STM32F7
+
+config TARGET_STM32F746_DISCO
+	bool "STM32F746 Discovery board"
+
+source "board/st/stm32f746-disco/Kconfig"
+
+endif
diff --git a/arch/arm/mach-stm32/stm32f7/Makefile b/arch/arm/mach-stm32/stm32f7/Makefile
new file mode 100644
index 0000000000..40f1ad35b7
--- /dev/null
+++ b/arch/arm/mach-stm32/stm32f7/Makefile
@@ -0,0 +1,8 @@
+#
+# (C) Copyright 2016
+# Vikas Manocha, <vikas.manocha@gmail.com>
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y += timer.o clock.o
diff --git a/arch/arm/mach-stm32/stm32f7/clock.c b/arch/arm/mach-stm32/stm32f7/clock.c
new file mode 100644
index 0000000000..17a715bac9
--- /dev/null
+++ b/arch/arm/mach-stm32/stm32f7/clock.c
@@ -0,0 +1,56 @@
+/*
+ * (C) Copyright 2016
+ * Vikas Manocha, <vikas.manocha@st.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/rcc.h>
+#include <asm/arch/stm32.h>
+#include <asm/arch/stm32_periph.h>
+
+void clock_setup(int peripheral)
+{
+	switch (peripheral) {
+	case USART1_CLOCK_CFG:
+		setbits_le32(RCC_BASE + RCC_APB2ENR, RCC_ENR_USART1EN);
+		break;
+	case GPIO_A_CLOCK_CFG:
+		setbits_le32(RCC_BASE + RCC_AHB1ENR, RCC_ENR_GPIO_A_EN);
+		break;
+	case GPIO_B_CLOCK_CFG:
+		setbits_le32(RCC_BASE + RCC_AHB1ENR, RCC_ENR_GPIO_B_EN);
+		break;
+	case GPIO_C_CLOCK_CFG:
+		setbits_le32(RCC_BASE + RCC_AHB1ENR, RCC_ENR_GPIO_C_EN);
+		break;
+	case GPIO_D_CLOCK_CFG:
+		setbits_le32(RCC_BASE + RCC_AHB1ENR, RCC_ENR_GPIO_D_EN);
+		break;
+	case GPIO_E_CLOCK_CFG:
+		setbits_le32(RCC_BASE + RCC_AHB1ENR, RCC_ENR_GPIO_E_EN);
+		break;
+	case GPIO_F_CLOCK_CFG:
+		setbits_le32(RCC_BASE + RCC_AHB1ENR, RCC_ENR_GPIO_F_EN);
+		break;
+	case GPIO_G_CLOCK_CFG:
+		setbits_le32(RCC_BASE + RCC_AHB1ENR, RCC_ENR_GPIO_G_EN);
+		break;
+	case GPIO_H_CLOCK_CFG:
+		setbits_le32(RCC_BASE + RCC_AHB1ENR, RCC_ENR_GPIO_H_EN);
+		break;
+	case GPIO_I_CLOCK_CFG:
+		setbits_le32(RCC_BASE + RCC_AHB1ENR, RCC_ENR_GPIO_I_EN);
+		break;
+	case GPIO_J_CLOCK_CFG:
+		setbits_le32(RCC_BASE + RCC_AHB1ENR, RCC_ENR_GPIO_J_EN);
+		break;
+	case GPIO_K_CLOCK_CFG:
+		setbits_le32(RCC_BASE + RCC_AHB1ENR, RCC_ENR_GPIO_K_EN);
+		break;
+	default:
+		break;
+	}
+}
diff --git a/arch/arm/mach-stm32/stm32f7/timer.c b/arch/arm/mach-stm32/stm32f7/timer.c
new file mode 100644
index 0000000000..a7dee1044d
--- /dev/null
+++ b/arch/arm/mach-stm32/stm32f7/timer.c
@@ -0,0 +1,112 @@
+/*
+ * (C) Copyright 2016
+ * Vikas Manocha, ST Micoelectronics, vikas.manocha@st.com.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/stm32.h>
+#include <asm/arch/gpt.h>
+#include <asm/arch/rcc.h>
+
+#define READ_TIMER()	(readl(&gpt1_regs_ptr->cnt) & GPT_FREE_RUNNING)
+#define GPT_RESOLUTION	(CONFIG_SYS_HZ_CLOCK/CONFIG_STM32_HZ)
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define timestamp gd->arch.tbl
+#define lastdec gd->arch.lastinc
+
+int timer_init(void)
+{
+	/* Timer2 clock configuration */
+	setbits_le32(RCC_BASE + RCC_APB1ENR, RCC_APB1ENR_TIM2EN);
+	/* Stop the timer */
+	writel(readl(&gpt1_regs_ptr->cr1) & ~GPT_CR1_CEN, &gpt1_regs_ptr->cr1);
+
+	writel((CONFIG_SYS_CLK_FREQ/CONFIG_SYS_HZ_CLOCK) - 1,
+						&gpt1_regs_ptr->psc);
+
+	/* Configure timer for auto-reload */
+	writel(readl(&gpt1_regs_ptr->cr1) | GPT_MODE_AUTO_RELOAD,
+						&gpt1_regs_ptr->cr1);
+
+	/* load value for free running */
+	writel(GPT_FREE_RUNNING, &gpt1_regs_ptr->arr);
+
+	/* start timer */
+	writel(readl(&gpt1_regs_ptr->cr1) | GPT_CR1_CEN, &gpt1_regs_ptr->cr1);
+
+	writel(readl(&gpt1_regs_ptr->egr) | TIM_EGR_UG, &gpt1_regs_ptr->egr);
+
+	/* Reset the timer */
+	lastdec = READ_TIMER();
+	timestamp = 0;
+
+	return 0;
+}
+
+/*
+ * timer without interrupts
+ */
+ulong get_timer(ulong base)
+{
+	return (get_timer_masked() / GPT_RESOLUTION) - base;
+}
+
+void __udelay(unsigned long usec)
+{
+	ulong tmo;
+	ulong start = get_timer_masked();
+	ulong tenudelcnt = CONFIG_SYS_HZ_CLOCK / (1000 * 100);
+	ulong rndoff;
+
+	rndoff = (usec % 10) ? 1 : 0;
+
+	/* tenudelcnt timer tick gives 10 microsecconds delay */
+	tmo = ((usec / 10) + rndoff) * tenudelcnt;
+
+	while ((ulong) (get_timer_masked() - start) < tmo)
+		;
+}
+
+ulong get_timer_masked(void)
+{
+	ulong now = READ_TIMER();
+
+	if (now >= lastdec) {
+		/* normal mode */
+		timestamp += now - lastdec;
+	} else {
+		/* we have an overflow ... */
+		timestamp += now + GPT_FREE_RUNNING - lastdec;
+	}
+	lastdec = now;
+
+	return timestamp;
+}
+
+void udelay_masked(unsigned long usec)
+{
+	return udelay(usec);
+}
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On ARM it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+	return get_timer(0);
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On ARM it returns the number of timer ticks per second.
+ */
+ulong get_tbclk(void)
+{
+	return CONFIG_STM32_HZ;
+}
diff --git a/board/st/stm32f746-disco/Kconfig b/board/st/stm32f746-disco/Kconfig
new file mode 100644
index 0000000000..09289d2323
--- /dev/null
+++ b/board/st/stm32f746-disco/Kconfig
@@ -0,0 +1,19 @@
+if TARGET_STM32F746_DISCO
+
+config SYS_BOARD
+	string
+	default "stm32f746-disco"
+
+config SYS_VENDOR
+	string
+	default "st"
+
+config SYS_SOC
+	string
+	default "stm32f7"
+
+config SYS_CONFIG_NAME
+	string
+	default "stm32f746-disco"
+
+endif
diff --git a/board/st/stm32f746-disco/MAINTAINERS b/board/st/stm32f746-disco/MAINTAINERS
new file mode 100644
index 0000000000..2df0a65ac2
--- /dev/null
+++ b/board/st/stm32f746-disco/MAINTAINERS
@@ -0,0 +1,6 @@
+STM32F746 DISCOVERY BOARD
+M:	Vikas Manocha <vikas.manocha@st.com>
+S:	Maintained
+F:	board/st/stm32f746-disco
+F:	include/configs/stm32f746-disco.h
+F:	configs/stm32f746-disco_defconfig
diff --git a/board/st/stm32f746-disco/Makefile b/board/st/stm32f746-disco/Makefile
new file mode 100644
index 0000000000..db8a0a4dcf
--- /dev/null
+++ b/board/st/stm32f746-disco/Makefile
@@ -0,0 +1,8 @@
+#
+# (C) Copyright 2016
+# Vikas Manocha <vikas.manocha@st.com>
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y	:= stm32f746-disco.o
diff --git a/board/st/stm32f746-disco/stm32f746-disco.c b/board/st/stm32f746-disco/stm32f746-disco.c
new file mode 100644
index 0000000000..0e04d14148
--- /dev/null
+++ b/board/st/stm32f746-disco/stm32f746-disco.c
@@ -0,0 +1,99 @@
+/*
+ * (C) Copyright 2016
+ * Vikas Manocha, <vikas.manocha@st.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/armv7m.h>
+#include <asm/arch/stm32.h>
+#include <asm/arch/gpio.h>
+#include <dm/platdata.h>
+#include <dm/platform_data/serial_stm32x7.h>
+#include <asm/arch/stm32_periph.h>
+#include <asm/arch/stm32_defs.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+const struct stm32_gpio_ctl gpio_ctl_gpout = {
+	.mode = STM32_GPIO_MODE_OUT,
+	.otype = STM32_GPIO_OTYPE_PP,
+	.speed = STM32_GPIO_SPEED_50M,
+	.pupd = STM32_GPIO_PUPD_NO,
+	.af = STM32_GPIO_AF0
+};
+
+const struct stm32_gpio_ctl gpio_ctl_usart = {
+	.mode = STM32_GPIO_MODE_AF,
+	.otype = STM32_GPIO_OTYPE_PP,
+	.speed = STM32_GPIO_SPEED_50M,
+	.pupd = STM32_GPIO_PUPD_UP,
+	.af = STM32_GPIO_AF7
+};
+
+static const struct stm32_gpio_dsc usart_gpio[] = {
+	{STM32_GPIO_PORT_A, STM32_GPIO_PIN_9},	/* TX */
+	{STM32_GPIO_PORT_B, STM32_GPIO_PIN_7},	/* RX */
+};
+
+int uart_setup_gpio(void)
+{
+	int i;
+	int rv = 0;
+
+	clock_setup(GPIO_A_CLOCK_CFG);
+	clock_setup(GPIO_B_CLOCK_CFG);
+	for (i = 0; i < ARRAY_SIZE(usart_gpio); i++) {
+		rv = stm32_gpio_config(&usart_gpio[i], &gpio_ctl_usart);
+		if (rv)
+			goto out;
+	}
+
+out:
+	return rv;
+}
+
+static const struct stm32x7_serial_platdata serial_platdata = {
+	.base = (struct stm32_usart *)USART1_BASE,
+	.clock = CONFIG_SYS_CLK_FREQ,
+};
+
+U_BOOT_DEVICE(stm32x7_serials) = {
+	.name = "serial_stm32x7",
+	.platdata = &serial_platdata,
+};
+
+u32 get_board_rev(void)
+{
+	return 0;
+}
+
+int board_early_init_f(void)
+{
+	int res;
+
+	res = uart_setup_gpio();
+	clock_setup(USART1_CLOCK_CFG);
+	if (res)
+		return res;
+
+	return 0;
+}
+
+int board_init(void)
+{
+	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+
+	return 0;
+}
+
+int dram_init(void)
+{
+	gd->bd->bi_dram[0].start = CONFIG_SYS_RAM_BASE;
+	gd->bd->bi_dram[0].size  = CONFIG_SYS_RAM_SIZE;
+
+	gd->ram_size = CONFIG_SYS_RAM_SIZE;
+	return 0;
+}
diff --git a/configs/stm32f746-disco_defconfig b/configs/stm32f746-disco_defconfig
new file mode 100644
index 0000000000..7cfed4a514
--- /dev/null
+++ b/configs/stm32f746-disco_defconfig
@@ -0,0 +1,9 @@
+CONFIG_ARM=y
+CONFIG_STM32=y
+CONFIG_STM32F7=y
+CONFIG_TARGET_STM32F746_DISCO=y
+CONFIG_SYS_PROMPT="U-Boot > "
+CONFIG_AUTOBOOT_KEYED=y
+CONFIG_AUTOBOOT_PROMPT="Hit SPACE in %d seconds to stop autoboot.\n"
+CONFIG_AUTOBOOT_STOP_STR=" "
+# CONFIG_CMD_SETEXPR is not set
diff --git a/drivers/gpio/stm32_gpio.c b/drivers/gpio/stm32_gpio.c
index 739de010e5..50f86d3dd6 100644
--- a/drivers/gpio/stm32_gpio.c
+++ b/drivers/gpio/stm32_gpio.c
@@ -19,7 +19,7 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#if defined(CONFIG_STM32F4)
+#if defined(CONFIG_STM32F4) || defined(CONFIG_STM32F7)
 static const unsigned long io_base[] = {
 	STM32_GPIOA_BASE, STM32_GPIOB_BASE, STM32_GPIOC_BASE,
 	STM32_GPIOD_BASE, STM32_GPIOE_BASE, STM32_GPIOF_BASE,
@@ -207,7 +207,7 @@ int gpio_direction_input(unsigned gpio)
 
 	dsc.port = stm32_gpio_to_port(gpio);
 	dsc.pin = stm32_gpio_to_pin(gpio);
-#if defined(CONFIG_STM32F4)
+#if defined(CONFIG_STM32F4) || defined(CONFIG_STM32F7)
 	ctl.af = STM32_GPIO_AF0;
 	ctl.mode = STM32_GPIO_MODE_IN;
 	ctl.otype = STM32_GPIO_OTYPE_PP;
@@ -233,7 +233,7 @@ int gpio_direction_output(unsigned gpio, int value)
 
 	dsc.port = stm32_gpio_to_port(gpio);
 	dsc.pin = stm32_gpio_to_pin(gpio);
-#if defined(CONFIG_STM32F4)
+#if defined(CONFIG_STM32F4) || defined(CONFIG_STM32F7)
 	ctl.af = STM32_GPIO_AF0;
 	ctl.mode = STM32_GPIO_MODE_OUT;
 	ctl.pupd = STM32_GPIO_PUPD_NO;
diff --git a/include/configs/stm32f746-disco.h b/include/configs/stm32f746-disco.h
new file mode 100644
index 0000000000..e1b8bcb084
--- /dev/null
+++ b/include/configs/stm32f746-disco.h
@@ -0,0 +1,89 @@
+/*
+ * (C) Copyright 2016
+ * Vikas Manocha, <vikas.manocha@st.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_SYS_THUMB_BUILD
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_OF_LIBFDT
+#define CONFIG_BOARD_EARLY_INIT_F
+
+#define CONFIG_SYS_FLASH_BASE		0x08000000
+#define CONFIG_SYS_INIT_SP_ADDR		0x20050000
+#define CONFIG_SYS_TEXT_BASE		0x08000000
+
+#define CONFIG_SYS_ICACHE_OFF
+#define CONFIG_SYS_DCACHE_OFF
+
+/*
+ * Configuration of the external SDRAM memory
+ */
+#define CONFIG_NR_DRAM_BANKS		1
+#define CONFIG_SYS_RAM_SIZE		((64 + 192) << 10)
+#define CONFIG_SYS_RAM_CS		1
+#define CONFIG_SYS_RAM_FREQ_DIV		2
+#define CONFIG_SYS_RAM_BASE		0x20000000
+#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_RAM_BASE
+#define CONFIG_SYS_LOAD_ADDR		0x20000000
+#define CONFIG_LOADADDR			0x20000000
+
+#define CONFIG_SYS_MAX_FLASH_SECT	12
+#define CONFIG_SYS_MAX_FLASH_BANKS	2
+
+#ifndef CONFIG_SYS_NO_FLASH
+#define CONFIG_ENV_IS_IN_FLASH
+#else
+#define CONFIG_ENV_IS_NOWHERE
+#endif
+#define CONFIG_ENV_SIZE			(8 << 10)
+
+#define CONFIG_STM32_GPIO
+#define CONFIG_STM32X7_SERIAL
+
+#define CONFIG_SYS_CLK_FREQ		16*1000*1000 /* 180 MHz */
+#define CONFIG_SYS_HZ_CLOCK		1000000	/* Timer is clocked at 1MHz */
+
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define CONFIG_REVISION_TAG
+
+#define CONFIG_SYS_CBSIZE		1024
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE \
+					+ sizeof(CONFIG_SYS_PROMPT) + 16)
+
+#define CONFIG_SYS_MAXARGS		16
+#define CONFIG_SYS_MALLOC_LEN		(16 * 1024)
+#define CONFIG_STACKSIZE		(64 << 10)
+
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_BOOTARGS							\
+	"console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel"
+#define CONFIG_BOOTCOMMAND						\
+	"run bootcmd_romfs"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"bootargs_romfs=uclinux.physaddr=0x08180000 root=/dev/mtdblock0\0" \
+	"bootcmd_romfs=setenv bootargs ${bootargs} ${bootargs_romfs};" \
+	"bootm 0x08044000 - 0x08042000\0"
+
+#define CONFIG_BOOTDELAY		3
+
+/*
+ * Command line configuration.
+ */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_CMDLINE_EDITING
+
+#define CONFIG_CMD_MEM
+#define CONFIG_CMD_TIMER
+#undef CONFIG_CMD_IMLS
+#endif /* __CONFIG_H */