Add command for handling DDR ECC registers on MPC8349EE MDS board.

4 files changed, 465 insertions, 0 deletions

diff --git a/CHANGELOG b/CHANGELOG
index e8f4f66f18..9274bdb357 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,8 @@
 Changes since U-Boot 1.1.4:
 ======================================================================
 
+* Add command for handling DDR ECC registers on MPC8349EE MDS board.
+
 * Fix DDR ECC bit definitions for MPC83xx.
 
 * Add initial support for MPC8349E MDS board.
diff --git a/board/mpc8349emds/mpc8349emds.c b/board/mpc8349emds/mpc8349emds.c
index cff4774206..a468c5a7b5 100644
--- a/board/mpc8349emds/mpc8349emds.c
+++ b/board/mpc8349emds/mpc8349emds.c
@@ -29,6 +29,7 @@
 #include <i2c.h>
 #include <spd.h>
 #include <miiphy.h>
+#include <command.h>
 #if defined(CONFIG_PCI)
 #include <pci.h>
 #endif
@@ -277,3 +278,329 @@ void sdram_init(void)
 	put("SDRAM on Local Bus is NOT available!\n");
 }
 #endif
+
+#if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD)
+/*
+ * ECC user commands
+ */
+void ecc_print_status(void)
+{
+	volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
+	volatile ddr8349_t *ddr = &immap->ddr;
+
+	printf("\nECC mode: %s\n\n", (ddr->sdram_cfg & SDRAM_CFG_ECC_EN) ? "ON" : "OFF");
+
+	/* Interrupts */
+	printf("Memory Error Interrupt Enable:\n");
+	printf("  Multiple-Bit Error Interrupt Enable: %d\n",
+			(ddr->err_int_en & ECC_ERR_INT_EN_MBEE) ? 1 : 0);
+	printf("  Single-Bit Error Interrupt Enable: %d\n",
+			(ddr->err_int_en & ECC_ERR_INT_EN_SBEE) ? 1 : 0);
+	printf("  Memory Select Error Interrupt Enable: %d\n\n",
+			(ddr->err_int_en & ECC_ERR_INT_EN_MSEE) ? 1 : 0);
+
+	/* Error disable */
+	printf("Memory Error Disable:\n");
+	printf("  Multiple-Bit Error Disable: %d\n",
+			(ddr->err_disable & ECC_ERROR_DISABLE_MBED) ? 1 : 0);
+	printf("  Sinle-Bit Error Disable: %d\n",
+			(ddr->err_disable & ECC_ERROR_DISABLE_SBED) ? 1 : 0);
+	printf("  Memory Select Error Disable: %d\n\n",
+			(ddr->err_disable & ECC_ERROR_DISABLE_MSED) ? 1 : 0);
+
+	/* Error injection */
+	printf("Memory Data Path Error Injection Mask High/Low: %08lx %08lx\n",
+			ddr->data_err_inject_hi, ddr->data_err_inject_lo);
+
+	printf("Memory Data Path Error Injection Mask ECC:\n");
+	printf("  ECC Mirror Byte: %d\n",
+			(ddr->ecc_err_inject & ECC_ERR_INJECT_EMB) ? 1 : 0);
+	printf("  ECC Injection Enable: %d\n",
+			(ddr->ecc_err_inject & ECC_ERR_INJECT_EIEN) ? 1 : 0);
+	printf("  ECC Error Injection Mask: 0x%02x\n\n",
+			ddr->ecc_err_inject & ECC_ERR_INJECT_EEIM);
+
+	/* SBE counter/threshold */
+	printf("Memory Single-Bit Error Management (0..255):\n");
+	printf("  Single-Bit Error Threshold: %d\n",
+			(ddr->err_sbe & ECC_ERROR_MAN_SBET) >> ECC_ERROR_MAN_SBET_SHIFT);
+	printf("  Single-Bit Error Counter: %d\n\n",
+			(ddr->err_sbe & ECC_ERROR_MAN_SBEC) >> ECC_ERROR_MAN_SBEC_SHIFT);
+
+	/* Error detect */
+	printf("Memory Error Detect:\n");
+	printf("  Multiple Memory Errors: %d\n",
+			(ddr->err_detect & ECC_ERROR_DETECT_MME) ? 1 : 0);
+	printf("  Multiple-Bit Error: %d\n",
+			(ddr->err_detect & ECC_ERROR_DETECT_MBE) ? 1 : 0);
+	printf("  Single-Bit Error: %d\n",
+			(ddr->err_detect & ECC_ERROR_DETECT_SBE) ? 1 : 0);
+	printf("  Memory Select Error: %d\n\n",
+			(ddr->err_detect & ECC_ERROR_DETECT_MSE) ? 1 : 0);
+
+	/* Capture data */
+	printf("Memory Error Address Capture: 0x%08lx\n", ddr->capture_address);
+	printf("Memory Data Path Read Capture High/Low: %08lx %08lx\n",
+			ddr->capture_data_hi, ddr->capture_data_lo);
+	printf("Memory Data Path Read Capture ECC: 0x%02x\n\n",
+		ddr->capture_ecc & CAPTURE_ECC_ECE);
+
+	printf("Memory Error Attributes Capture:\n");
+	printf("  Data Beat Number: %d\n",
+			(ddr->capture_attributes & ECC_CAPT_ATTR_BNUM) >> ECC_CAPT_ATTR_BNUM_SHIFT);
+	printf("  Transaction Size: %d\n",
+			(ddr->capture_attributes & ECC_CAPT_ATTR_TSIZ) >> ECC_CAPT_ATTR_TSIZ_SHIFT);
+	printf("  Transaction Source: %d\n",
+			(ddr->capture_attributes & ECC_CAPT_ATTR_TSRC) >> ECC_CAPT_ATTR_TSRC_SHIFT);
+	printf("  Transaction Type: %d\n",
+			(ddr->capture_attributes & ECC_CAPT_ATTR_TTYP) >> ECC_CAPT_ATTR_TTYP_SHIFT);
+	printf("  Error Information Valid: %d\n\n",
+			ddr->capture_attributes & ECC_CAPT_ATTR_VLD);
+}
+
+int do_ecc ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
+	volatile ddr8349_t *ddr = &immap->ddr;
+	volatile u32 val;
+	u64 *addr, count, val64;
+	register u64 *i;
+	
+	if (argc > 4) {
+		printf ("Usage:\n%s\n", cmdtp->usage);
+		return 1;
+	}
+	
+	if (argc == 2) {
+		if (strcmp(argv[1], "status") == 0) {
+			ecc_print_status();
+			return 0;
+		} else if (strcmp(argv[1], "captureclear") == 0) {
+			ddr->capture_address = 0;
+			ddr->capture_data_hi = 0;
+			ddr->capture_data_lo = 0;
+			ddr->capture_ecc = 0;
+			ddr->capture_attributes = 0;
+			return 0;
+		}
+	} 
+	
+	if (argc == 3) {
+		if (strcmp(argv[1], "sbecnt") == 0) {
+			val = simple_strtoul(argv[2], NULL, 10);
+			if (val > 255) {
+				printf("Incorrect Counter value, should be 0..255\n");
+				return 1;
+			}
+
+			val = (val << ECC_ERROR_MAN_SBEC_SHIFT);
+			val |= (ddr->err_sbe & ECC_ERROR_MAN_SBET);
+
+			ddr->err_sbe = val;
+			return 0;
+		} else if (strcmp(argv[1], "sbethr") == 0) {
+			val = simple_strtoul(argv[2], NULL, 10);
+			if (val > 255) {
+				printf("Incorrect Counter value, should be 0..255\n");
+				return 1;
+			}
+
+			val = (val << ECC_ERROR_MAN_SBET_SHIFT);
+			val |= (ddr->err_sbe & ECC_ERROR_MAN_SBEC);
+
+			ddr->err_sbe = val;
+			return 0;
+		} else if (strcmp(argv[1], "errdisable") == 0) {
+			val = ddr->err_disable;
+
+			if (strcmp(argv[2], "+sbe") == 0) {
+				val |= ECC_ERROR_DISABLE_SBED;
+			} else if (strcmp(argv[2], "+mbe") == 0) {
+				val |= ECC_ERROR_DISABLE_MBED;
+			} else if (strcmp(argv[2], "+mse") == 0) {
+				val |= ECC_ERROR_DISABLE_MSED;
+			} else if (strcmp(argv[2], "+all") == 0) {
+				val |= (ECC_ERROR_DISABLE_SBED | 
+					ECC_ERROR_DISABLE_MBED | 
+					ECC_ERROR_DISABLE_MSED);
+			} else if (strcmp(argv[2], "-sbe") == 0) {
+				val &= ~ECC_ERROR_DISABLE_SBED;
+			} else if (strcmp(argv[2], "-mbe") == 0) {
+				val &= ~ECC_ERROR_DISABLE_MBED;
+			} else if (strcmp(argv[2], "-mse") == 0) {
+				val &= ~ECC_ERROR_DISABLE_MSED;
+			} else if (strcmp(argv[2], "-all") == 0) {
+				val &= ~(ECC_ERROR_DISABLE_SBED | 
+					ECC_ERROR_DISABLE_MBED | 
+					ECC_ERROR_DISABLE_MSED);
+			} else {
+				printf("Incorrect err_disable field\n");
+				return 1;
+			}
+
+			ddr->err_disable = val;
+			__asm__ __volatile__ ("sync");
+			__asm__ __volatile__ ("isync");
+			return 0;
+		} else if (strcmp(argv[1], "errdetectclr") == 0) {
+			val = ddr->err_detect;
+
+			if (strcmp(argv[2], "mme") == 0) {
+				val |= ECC_ERROR_DETECT_MME;
+			} else if (strcmp(argv[2], "sbe") == 0) {
+				val |= ECC_ERROR_DETECT_SBE;
+			} else if (strcmp(argv[2], "mbe") == 0) {
+				val |= ECC_ERROR_DETECT_MBE;
+			} else if (strcmp(argv[2], "mse") == 0) {
+				val |= ECC_ERROR_DETECT_MSE;
+			} else if (strcmp(argv[2], "all") == 0) {
+				val |= (ECC_ERROR_DETECT_MME |
+					ECC_ERROR_DETECT_MBE |
+					ECC_ERROR_DETECT_SBE |
+					ECC_ERROR_DETECT_MSE);
+			} else {
+				printf("Incorrect err_detect field\n");
+				return 1;
+			}
+
+			ddr->err_detect = val;
+			return 0;
+		} else if (strcmp(argv[1], "injectdatahi") == 0) {
+			val = simple_strtoul(argv[2], NULL, 16);
+
+			ddr->data_err_inject_hi = val;
+			return 0;
+		} else if (strcmp(argv[1], "injectdatalo") == 0) {
+			val = simple_strtoul(argv[2], NULL, 16);
+
+			ddr->data_err_inject_lo = val;
+			return 0;
+		} else if (strcmp(argv[1], "injectecc") == 0) {
+			val = simple_strtoul(argv[2], NULL, 16);
+			if (val > 0xff) {
+				printf("Incorrect ECC inject mask, should be 0x00..0xff\n");
+				return 1;
+			}
+			val |= (ddr->ecc_err_inject & ~ECC_ERR_INJECT_EEIM);
+
+			ddr->ecc_err_inject = val;
+			return 0;
+		} else if (strcmp(argv[1], "inject") == 0) {
+			val = ddr->ecc_err_inject;
+
+			if (strcmp(argv[2], "en") == 0)
+				val |= ECC_ERR_INJECT_EIEN;
+			else if (strcmp(argv[2], "dis") == 0)
+				val &= ~ECC_ERR_INJECT_EIEN;
+			else
+				printf("Incorrect command\n");
+
+			ddr->ecc_err_inject = val;
+			__asm__ __volatile__ ("sync");
+			__asm__ __volatile__ ("isync");
+			return 0;
+		} else if (strcmp(argv[1], "mirror") == 0) {
+			val = ddr->ecc_err_inject;
+
+			if (strcmp(argv[2], "en") == 0)
+				val |= ECC_ERR_INJECT_EMB;
+			else if (strcmp(argv[2], "dis") == 0)
+				val &= ~ECC_ERR_INJECT_EMB;
+			else
+				printf("Incorrect command\n");
+
+			ddr->ecc_err_inject = val;
+			return 0;
+		}
+	}
+
+	if (argc == 4) {
+		if (strcmp(argv[1], "test") == 0) {
+			addr = (u64 *)simple_strtoul(argv[2], NULL, 16);
+			count = simple_strtoul(argv[3], NULL, 16);
+
+			if ((u32)addr % 8) {
+				printf("Address not alligned on double word boundary\n");
+				return 1;
+			}
+
+			disable_interrupts();
+			icache_disable();
+
+			for (i = addr; i < addr + count; i++) {
+				/* enable injects */
+				ddr->ecc_err_inject |= ECC_ERR_INJECT_EIEN;
+				__asm__ __volatile__ ("sync");
+				__asm__ __volatile__ ("isync");
+
+				/* write memory location injecting errors */
+				*i = 0x1122334455667788ULL;
+				__asm__ __volatile__ ("sync");
+
+				/* disable injects */
+				ddr->ecc_err_inject &= ~ECC_ERR_INJECT_EIEN;
+				__asm__ __volatile__ ("sync");
+				__asm__ __volatile__ ("isync");
+
+				/* read data, this generates ECC error */
+				val64 = *i;
+				__asm__ __volatile__ ("sync");
+
+				/* disable errors for ECC */
+				ddr->err_disable |= ~ECC_ERROR_ENABLE;
+				__asm__ __volatile__ ("sync");
+				__asm__ __volatile__ ("isync");
+
+				/* re-initialize memory, write the location again
+				 * NOT injecting errors this time */
+				*i = 0xcafecafecafecafeULL;
+				__asm__ __volatile__ ("sync");
+
+				/* enable errors for ECC */
+				ddr->err_disable &= ECC_ERROR_ENABLE;
+				__asm__ __volatile__ ("sync");
+				__asm__ __volatile__ ("isync");
+			}
+
+			icache_enable();
+			enable_interrupts();
+
+			return 0;
+		}
+	}
+
+	printf ("Usage:\n%s\n", cmdtp->usage);
+	return 1;
+}
+
+U_BOOT_CMD(
+	ecc,     4,     0,      do_ecc,
+	"ecc     - support for DDR ECC features\n",
+	"status              - print out status info\n"
+	"ecc captureclear        - clear capture regs data\n"
+	"ecc sbecnt <val>        - set Single-Bit Error counter\n"
+	"ecc sbethr <val>        - set Single-Bit Threshold\n"
+	"ecc errdisable <flag>   - clear/set disable Memory Error Disable, flag:\n"
+	"  [-|+]sbe - Single-Bit Error\n"
+	"  [-|+]mbe - Multiple-Bit Error\n"
+	"  [-|+]mse - Memory Select Error\n"
+	"  [-|+]all - all errors\n"
+	"ecc errdetectclr <flag> - clear Memory Error Detect, flag:\n"
+	"  mme - Multiple Memory Errors\n"
+	"  sbe - Single-Bit Error\n"
+	"  mbe - Multiple-Bit Error\n"
+	"  mse - Memory Select Error\n"
+	"  all - all errors\n"
+	"ecc injectdatahi <hi>  - set Memory Data Path Error Injection Mask High\n"
+	"ecc injectdatalo <lo>  - set Memory Data Path Error Injection Mask Low\n"
+	"ecc injectecc <ecc>    - set ECC Error Injection Mask\n"
+	"ecc inject <en|dis>    - enable/disable error injection\n"
+	"ecc mirror <en|dis>    - enable/disable mirror byte\n"
+	"ecc test <addr> <cnt>  - test mem region:\n"
+	"  - enables injects\n"
+	"  - writes pattern injecting errors\n"
+	"  - disables injects\n"
+	"  - reads pattern back, generates error\n"
+	"  - re-inits memory"
+);
+#endif /* if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD) */
diff --git a/doc/README.mpc8349emds.ddrecc b/doc/README.mpc8349emds.ddrecc
new file mode 100644
index 0000000000..d8edada565
--- /dev/null
+++ b/doc/README.mpc8349emds.ddrecc
@@ -0,0 +1,135 @@
+
+
+Use cases for DDR 'ecc' command:
+================================
+
+Before executing particular tests reset target board or clear status registers:
+
+=> ecc captureclear
+=> ecc errdetectclr all
+=> ecc sbecnt 0
+
+
+Injecting Single-Bit Errors
+---------------------------
+
+1. Set 1 bit in Data Path Error Inject Mask
+
+=> ecc injectdatahi 1
+
+2. Run test over some memory region
+
+=> ecc test 200000 10
+
+3. Check ECC status
+
+=> ecc status
+...
+Memory Data Path Error Injection Mask High/Low: 00000001 00000000
+...
+Memory Single-Bit Error Management (0..255):
+  Single-Bit Error Threshold: 255
+  Single Bit Error Counter: 16
+...
+Memory Error Detect:
+  Multiple Memory Errors: 0
+  Multiple-Bit Error: 0
+  Single-Bit Error: 0
+...
+
+16 errors were generated, Single-Bit Error flag was not set as Single Bit Error
+Counter did not reach  Single-Bit Error Threshold.
+
+4. Make sure used memory region got re-initialized with 0xcafecafe pattern
+
+=> md 200000
+00200000: cafecafe cafecafe cafecafe cafecafe    ................
+00200010: cafecafe cafecafe cafecafe cafecafe    ................
+00200020: cafecafe cafecafe cafecafe cafecafe    ................
+00200030: cafecafe cafecafe cafecafe cafecafe    ................
+00200040: cafecafe cafecafe cafecafe cafecafe    ................
+00200050: cafecafe cafecafe cafecafe cafecafe    ................
+00200060: cafecafe cafecafe cafecafe cafecafe    ................
+00200070: cafecafe cafecafe cafecafe cafecafe    ................
+00200080: deadbeef deadbeef deadbeef deadbeef    ................
+00200090: deadbeef deadbeef deadbeef deadbeef    ................
+
+
+Injecting Multiple-Bit Errors
+-----------------------------
+
+1. Set more than 1 bit in Data Path Error Inject Mask
+
+=> ecc injectdatahi 5
+
+2. Run test over some memory region
+
+=> ecc test 200000 10
+
+3. Check ECC status
+
+=> ecc status
+...
+Memory Data Path Error Injection Mask High/Low: 00000005 00000000
+...
+Memory Error Detect:
+  Multiple Memory Errors: 1
+  Multiple-Bit Error: 1
+  Single-Bit Error: 0
+...
+
+Observe that both Multiple Memory Errors and Multiple-Bit Error flags are set.
+
+4. Make sure used memory region got re-initialized with 0xcafecafe pattern
+
+=> md 200000
+00200000: cafecafe cafecafe cafecafe cafecafe    ................
+00200010: cafecafe cafecafe cafecafe cafecafe    ................
+00200020: cafecafe cafecafe cafecafe cafecafe    ................
+00200030: cafecafe cafecafe cafecafe cafecafe    ................
+00200040: cafecafe cafecafe cafecafe cafecafe    ................
+00200050: cafecafe cafecafe cafecafe cafecafe    ................
+00200060: cafecafe cafecafe cafecafe cafecafe    ................
+00200070: cafecafe cafecafe cafecafe cafecafe    ................
+00200080: deadbeef deadbeef deadbeef deadbeef    ................
+00200090: deadbeef deadbeef deadbeef deadbeef    ................
+
+
+Test Single-Bit Error Counter and Threshold
+-------------------------------------------
+
+1. Set 1 bit in Data Path Error Inject Mask
+
+=> ecc injectdatahi 1
+
+2. Enable error injection
+
+=> ecc inject en
+
+3. Let u-boot run for a with Single-Bit error injection enabled
+
+4. Disable error injection
+
+=> ecc inject dis
+
+4. Check status
+
+=> ecc status
+
+...
+Memory Single-Bit Error Management (0..255):
+  Single-Bit Error Threshold: 255
+  Single Bit Error Counter: 60
+
+Memory Error Detect:
+  Multiple Memory Errors: 1
+  Multiple-Bit Error: 0
+  Single-Bit Error: 1
+...
+
+Observe that Single-Bit Error is 'on' which means that Single-Bit Error Counter
+reached Single-Bit Error Threshold. Multiple Memory Errors bit is also 'on', that
+is Counter reached Threshold more than one time (it wraps back after reaching
+Threshold).
+
+
diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h
index ef2eced3f3..c2bd0f5cea 100644
--- a/include/configs/MPC8349EMDS.h
+++ b/include/configs/MPC8349EMDS.h
@@ -70,6 +70,7 @@
  * DDR Setup
  */
 #define CONFIG_DDR_ECC			/* only for ECC DDR module */
+#define CONFIG_DDR_ECC_CMD		/* use DDR ECC user commands */
 #define CONFIG_SPD_EEPROM		/* use SPD EEPROM for DDR setup*/
 
 #define CFG_DDR_BASE		0x00000000	/* DDR is system memory*/