diff options
| author | Kim Phillips <kim.phillips@freescale.com> | 2007-06-14 19:56:58 -0500 |
|---|---|---|
| committer | Kim Phillips <kim.phillips@freescale.com> | 2007-06-14 19:56:58 -0500 |
| commit | b721ff745d3e5b4fe6bb8db430553d54dba4bd17 (patch) | |
| tree | 8f267466c28352bac8e2f59358411d0860bb0bcf | |
| parent | 5b1313fb2758ffce8b624457f777d8cc6709608d (diff) | |
| parent | 9912121f7ed804ea58fd62f3f230b5dcfc357d88 (diff) | |
| download | blackbird-obmc-uboot-b721ff745d3e5b4fe6bb8db430553d54dba4bd17.tar.gz blackbird-obmc-uboot-b721ff745d3e5b4fe6bb8db430553d54dba4bd17.zip | |
Merge git://www.denx.de/git/u-boot
84 files changed, 4038 insertions, 1117 deletions
@@ -1,9 +1,438 @@ +commit c440bfe6d6d92d66478a7e84402b31f48413617b +Author: Stefan Roese <sr@denx.de> +Date: Wed Jun 6 11:42:13 2007 +0200 + + ppc4xx: Add NAND booting support for AMCC Acadia (405EZ) eval board + + This patch adds NAND booting support for the AMCC Acadia eval board. + + Please make sure to configure jumper J7 to position 2-3 when booting + from NOR, and to position 1-2 when booting for NAND. + + I also added a board command to configure the I2C bootstrap EEPROM + values. Right now only 267MHz is support for booting either via NOR + or NAND FLASH. Here the usage: + + => bootstrap 267 nor ;to configure the board for 267MHz NOR booting + => bootstrap 267 nand ;to configure the board for 267MHz NNAND booting + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 32922cdc470fdfd39bea0c1c4f582d3fb340421e +Author: Ed Swarthout <Ed.Swarthout@freescale.com> +Date: Tue Jun 5 12:30:52 2007 -0500 + + mpc8641 image size cleanup + + e600 does not have a bootpg restriction. + Move the version string to beginning of image at fff00000. + Resetvec.S is not needed. + Update flash copy instructions. + Add tftpflash env variable + + Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> + Signed-off-by: Jon Loeliger <jdl@freescale.com> + +commit e3cbe1f93c5722f8ebbad468e30c069a2b511097 +Author: Benoît Monin <bmonin@adeneo.eu> +Date: Mon Jun 4 08:36:05 2007 +0200 + + [PATCH] Fix ppc4xx bootstrap letter displayed on startup + + The attached patch is mainly cosmetic, allowing u-boot to + display the correct bootstrap option letter according to the + datasheets. + + The original patch was extended with 405EZ support by Stefan + Roese. + + Signed-off-by: Benoit Monin <bmonin@adeneo.eu> + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 18d156eb37c90fadc8ec7a81a3b89176161f85b7 +Author: Stefan Roese <sr@denx.de> +Date: Fri Jun 1 16:18:17 2007 +0200 + + ppc4xx: Add missing file for Bamboo NAND booting support + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 155a96478a0881e6da96cbbbcf34952d6a3b1b4b +Author: Stefan Roese <sr@denx.de> +Date: Fri Jun 1 15:58:19 2007 +0200 + + ppc4xx: Undo Sequoia patch for dynamic EBC speed support of 83MHz + + This patch undoes the patch by Jeff Mann with commit-id ada4697d. As + suggested by AMCC it is not recommended to dynamically change the EBC + speed after bootup. So we undo this change to be on the safe side. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 9d9096043e8f713d4bf1743d32e1459e6a11644b +Author: Stefan Roese <sr@denx.de> +Date: Fri Jun 1 15:29:04 2007 +0200 + + ppc4xx: Update Sequoia NAND booting support with ECC + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit cf959c7d6687567c308e366e9581e1a5aff5cc5b +Author: Stefan Roese <sr@denx.de> +Date: Fri Jun 1 15:27:11 2007 +0200 + + ppc4xx: Add NAND booting support for AMCC Bamboo (440EP) eval board + + This patch adds NAND booting support for the AMCC Bamboo eval board. + Since the NAND-SPL boot image is limited to 4kbytes, this version + only supports the onboard 64MBytes of DDR. The DIMM modules can't be + supported, since the setup code for I2C DIMM autodetection and + configuration is too big for this NAND bootloader. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 42be56f53c8b107868e6125c8524ae84293e95a7 +Author: Stefan Roese <sr@denx.de> +Date: Fri Jun 1 15:23:04 2007 +0200 + + NAND: Add ECC support to NAND booting support in nand_spl/nand_boot.c + + The U-Boot NAND booting support is now extended to support ECC + upon loading of the NAND U-Boot image. + + Tested on AMCC Sequoia (440EPx) and Bamboo (440EP). + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit a471db07fbb65a841ffc9f4f112562b945230f98 +Author: Stefan Roese <sr@denx.de> +Date: Fri Jun 1 15:19:29 2007 +0200 + + ppc4xx: Prepare Bamboo port for NAND booting support + + This patch updates the "normal" Bamboo NOR booting port, so + that it is compatible with the coming soon NAND booting + Bamboo port. + + It also enables the 2nd NAND flash on the Bamboo. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 53ad02103fb8be4138a9937a8ab91fcdff7b4987 +Author: Stefan Roese <sr@denx.de> +Date: Fri Jun 1 15:16:58 2007 +0200 + + ppc4xx: Update in_be32() functions and friends to latest Linux version + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 91da09cfbce0c1de05d6d84aa8363d666fa7ea3c +Author: Stefan Roese <sr@denx.de> +Date: Fri Jun 1 15:15:12 2007 +0200 + + NAND: Add hardware ECC support to the PPC4xx NAND driver ndfc.c + + This patch adds hardware ECC support to the NDFC driver. It also + changes the register access from using the "simple" in32/out32 + functions to the in_be32/out_be32 functions, which make sure + that the access is correctly synced. This is the only recommended + access to SoC registers in the current Linux kernel. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 17b5e862287cca76f19dcf8b741e61a7d06617f2 +Author: Stefan Roese <sr@denx.de> +Date: Fri Jun 1 15:12:15 2007 +0200 + + NAND: Update nand_ecc.c to latest Linux version + + This patch updates the nand_ecc code to the latest Linux version. + The main reason for this is the more compact code. This makes + it possible to include the ECC code into the NAND bootloader + image (NAND_SPL) for PPC4xx. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit d2d432760d2199d0e8558fdd9d1789b8131abcf7 +Author: Stefan Roese <sr@denx.de> +Date: Fri Jun 1 15:09:50 2007 +0200 + + ppc4xx: 44x DDR driver code cleanup and small fix for Bamboo + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit e4bbed2803a2ad0521c7362f5d3e065f99abaedc +Author: Stefan Roese <sr@denx.de> +Date: Fri Jun 1 13:45:24 2007 +0200 + + ppc4xx: Change Luan config file to support ECC + + With the updated 44x DDR2 driver the Luan board now supports + ECC generation and checking. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 7187db73491c8de0fb56efb5e5134ba5ec443089 +Author: Stefan Roese <sr@denx.de> +Date: Fri Jun 1 13:45:00 2007 +0200 + + ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe) + + Add config option for 180 degree advance clock control as needed + for the AMCC Luan eval board. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit ee1529838abbfaa35f14e3ffbeaaba693159475f +Author: Wolfgang Denk <wd@denx.de> +Date: Thu May 31 17:20:09 2007 +0200 + + Add support for STX GP3SSA (stxssa) Board with 4 MiB flash. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 7049288fb1f16f1b317140226cdebd07bd416395 +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Sun May 27 17:26:46 2007 +0200 + + Motion-PRO: Code cleanup, fix of a typo in OF_STDOUT_PATH. + + Signed-off-by: Bartlomiej Sieka <tur@semihalf.com> + +commit 4520fd4d2c450da49637216aa0e53739b61c60ac +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Sun May 27 17:06:36 2007 +0200 + + Motion-PRO: Add support for redundant environment. + + Enable redundant environment, add a MTD partition for it; also add env. + variable command for passing MTD partitions to the kernel command line. + + Signed-off-by: Piotr Kruszynski <ppk@semihalf.com> + Acked-by: Bartlomiej Sieka <tur@semihalf.com> + +commit a26eabeec31746f06d309103690892805696e344 +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Sun May 27 17:05:11 2007 +0200 + + Motion-PRO: Change maximum console buffer size from 256 to 1024 bytes. + + Allow passing longer command line to the kernel - useful especially + for passing MTD partition layout. + + Signed-off-by: Piotr Kruszynski <ppk@semihalf.com> + Acked-by: Bartlomiej Sieka <tur@semihalf.com> + +commit 9160b96f71483a116de81c68985e8ee306d36764 +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Sun May 27 17:04:18 2007 +0200 + + Fix: Add missing NULL termination in strings expanded by macros parser. + + Signed-off-by: Piotr Kruszynski <ppk@semihalf.com> + Acked-by: Bartlomiej Sieka <tur@semihalf.com> + +commit 630ec84aef7228fc1dbfb38dec78541403a786cd +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Sun May 27 17:03:37 2007 +0200 + + Motion-PRO: Update EEPROM's page write bits and write delay. + + Change EEPROM configuration according to the datasheet: "The 24C01A and 24C02A + have a page write capability of two bytes", and "This device offers fast (1ms) + byte write". Add 3ms of extra delay. + + Signed-off-by: Piotr Kruszynski <ppk@semihalf.com> + Acked-by: Bartlomiej Sieka <tur@semihalf.com> + +commit c00125e07c1ebc125bab40e1e18bceed8be0c162 +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Sun May 27 16:58:45 2007 +0200 + + MPC5XXX, Motion-PRO: Fix PHY initialization problem. + + After being reset in mpc5xxx_fec_init_phy(), PHY goes into FX mode, in which + networking does not function. This commit switches PHY to TX mode by clearing + the FX_SEL bit of Mode Control Register. It also reverses commit + 008861a2f3ef2c062744d733787c7e530a1b8761, i.e., a temporary workaround. + + Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> + Acked-by: Bartlomiej Sieka <tur@semihalf.com> + +commit 93b78f534a6e708b4cf1a4ffb4d8438c67a007db +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Sun May 27 16:57:15 2007 +0200 + + Motion-PRO: Add support for the temperature sensor. + + Signed-off-by: Piotr Kruszynski <ppk@semihalf.com> + Acked-by: Bartlomiej Sieka <tur@semihalf.com> + +commit c75e639630cc132dc19cd1ecda5922c0db0bfbba +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Sun May 27 16:55:23 2007 +0200 + + Motion-PRO: Add displaying of CPLD revision information during boot. + + Signed-off-by: Jan Wrobel <wrr@semihalf.com> + Acked-by: Bartlomiej Sieka <tur@semihalf.com> + +commit c99512d6bd3973f01ca2fc4896d829b46e68f150 +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Sun May 27 16:53:43 2007 +0200 + + MPC5xxx: Change names of defines related to IPB and PCI clocks. + + Both CFG_PCISPEED_66 and CFG_IPBSPEED_133 are misnamed, as defining + them does not cause PCI or IPB clocks to run at the specified speed. + Instead, they configure divisors used to calculate said clocks. This + patch renames the defines according to their real function. + + Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> + Acked-by: Bartlomiej Sieka <tur@semihalf.com> + +commit a11c0b85dc3664bb3c1e781137118730c8f619ab +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Sun May 27 16:51:48 2007 +0200 + + Motion-PRO: Add LED support. + + Signed-off-by: Jan Wrobel <wrr@semihalf.com> + Signed-off-by: Marian Balakowicz <m8@semihalf.com> + Acked-by: Bartlomiej Sieka <tur@semihalf.com> + +commit d756894722c888d09a9fa1df8323753772d3dcce +Author: Stefan Roese <sr@denx.de> +Date: Thu May 24 09:49:00 2007 +0200 + + ppc4xx: Fix small 405EZ OCM initilization bug in start.S + + As pointed out by Bruce Adler <bruce.adler@acm.org> this patch + fixes a small bug in the 405EZ OCM initialization. Thanks for + spotting. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 5d4a179013d59a76446462e1eb0a969fba63eb81 +Author: Stefan Roese <sr@denx.de> +Date: Thu May 24 08:22:09 2007 +0200 + + ppc4xx: Update AMCC Acadia support for board revision 1.1 + + This patch updates the Acadia (405EZ) support for the new 1.1 board + revision. It also adds support for NAND FLASH via the 4xx NDFC. + + Please note that the jumper J7 must be in position 2-3 for this + NAND support. Position 1-2 is for NAND booting only. NAND booting + support will follow later. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 9f0077abd69f7a7c756a915b961037302be3e6f2 +Author: Stefan Roese <sr@denx.de> +Date: Tue May 22 12:48:09 2007 +0200 + + ppc4xx: Use do { ... } while (0) for CPR & SDR access macros + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 6f3dfc139a838b0841c151efe00ad47db2366e79 +Author: Stefan Roese <sr@denx.de> +Date: Tue May 22 12:46:10 2007 +0200 + + ppc4xx: Add 405 support to 4xx NAND driver ndfc.c + + This patch adds support for 405 PPC's to the 4xx NAND driver + ndfc.c. This is in preparation for the new AMCC 405EZ. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 10603d76767426be803dadd4fb688b97eb69481c +Author: Stefan Roese <sr@denx.de> +Date: Mon May 21 07:41:22 2007 +0200 + + ppc4xx: Fix problem in 405EZ OCM initialization + + As spotted by Bruce Adler this patch fixes an initialization problem + for the 405EZ OCM. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 3e3b956906eba9e4ad7931581ecedaad10eccce8 +Author: Peter Pearse <peter.pearse@arm.com> +Date: Fri May 18 16:47:03 2007 +0100 + + Reduce line lengths to 80 characters max. + +commit 93ef45c9ddfdd9fc17c4e74bd8e2f2456580eb72 +Author: Peter Pearse <peter.pearse@arm.com> +Date: Fri May 18 14:34:07 2007 +0100 + + Makefile permissions + +commit 1443a31457d68f7e8f0b9403e9832ec1e79dc59d +Author: Peter Pearse <peter.pearse@arm.com> +Date: Fri May 18 14:33:11 2007 +0100 + + Makefile permissions + +commit 70124c2602ae2d4c5d3dba05b482d91548242de8 +Author: Stefano Babic <sbabic@denx.de> +Date: Wed May 16 14:49:12 2007 +0200 + + Fix compile problem cause my Microblaze merge + + Signed-off-by: Stefano Babic <sbabic@denx.de> + +commit ada4697d0230d6da552867777f98a67ec3ba2579 +Author: Jeffrey Mann <mannj@embeddedplanet.com> +Date: Wed May 16 13:23:10 2007 +0200 + + [PATCH] Run new sequoia boards with an EBC speed of 83MHz + + Because the Sequoia board does not boot with an EBC faster than 66MHz, + the clock divider are changed after the initial boot process. + + This allows for maximum clocking speeds to be achieved on newer boards. + Sequoia boards with 666.66 MHz processors require that the EBC divider + be set to 3 in order to start the initial boot process at a slower EBC + speed. After the initial boot process, the divider can be set back to 2, + which will cause the boards to run at 83.333MHz. This is backward + compatible with boards with 533.33 MHz processors, as these boards will + already be set with an EBC divider of 2. + + Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com> + +commit a7676ea7732f3c596805079fed7e5c9fac652cfc +Author: Wolfgang Denk <wd@denx.de> +Date: Wed May 16 01:16:53 2007 +0200 + + Minor Coding Style cleanup, update CHANGELOG. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + commit d62f64cc23a940eafe712c776b3249e4160753d1 Author: Wolfgang Denk <wd@denx.de> Date: Wed May 16 00:13:33 2007 +0200 Coding Style Cleanup, new CHANGELOG +commit 61936667e86a250ae12fd2dc189d3588f0a59e0b +Author: Stefan Roese <sr@denx.de> +Date: Fri May 11 12:01:49 2007 +0200 + + ppc4xx: Add mtcpr/mfcpr access macros + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 343c48bd84606c4025c8a7c7263fda465d6e284c +Author: Stefan Roese <sr@denx.de> +Date: Fri May 11 12:01:06 2007 +0200 + + ppc4xx: Set bd->bi_pci_busfreq on 440EPx/GRx too + + Signed-off-by: Stefan Roese <sr@denx.de> + commit 7d98ba770a7eaefa29ce927f31a0956df85bf650 Author: Piotr Kruszynski <ppk@semihalf.com> Date: Thu May 10 16:55:52 2007 +0200 @@ -11,6 +440,48 @@ Date: Thu May 10 16:55:52 2007 +0200 [Motion-PRO] Add MTD and JFFS2 support, also add default partition definition. +commit 65fb6a676e821f9570a2a376dc204bf611ce5f81 +Author: Peter Pearse <peter.pearse@arm.com> +Date: Wed May 9 11:42:44 2007 +0100 + + Add the board directory for SMN42 + +commit 160131bf965785419626df6c388729fe0b597992 +Author: Peter Pearse <peter.pearse@arm.com> +Date: Wed May 9 11:41:58 2007 +0100 + + Add the files for the SMN42 board + +commit 5c6d2b5a500f8c49670de8910150b78a41f781fc +Author: Peter Pearse <peter.pearse@arm.com> +Date: Wed May 9 11:40:34 2007 +0100 + + Remove the deleted files for the SMN42 patch + +commit b0d8f5bf0d215adc9424cb228b2484dbf07f7761 +Author: Peter Pearse <peter.pearse@arm.com> +Date: Wed May 9 11:37:56 2007 +0100 + + New board SMN42 branch + +commit 29f3be0caf0799ca6b89dfd9824c15619a50000f +Author: Peter Pearse <peter.pearse@arm.com> +Date: Wed May 9 10:24:38 2007 +0100 + + Makefile permissions + +commit b84289b595731e8851df46e893845cc1322c9b9b +Author: Ed Swarthout <Ed.Swarthout@freescale.com> +Date: Tue May 8 14:17:07 2007 -0500 + + 8641hpcn: Fix Makefile after moving pixis to board/freescale. + + The OBJTREE != SRCTREE build scenario was broken. + This fixes it. + + Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> + Signed-off-by: Jon Loeliger <jdl@freescale.com> + commit e69f66c6ebe82bbbd1da766bc4eda40ec7ee5af1 Author: Michal Simek <monstr@monstr.eu> Date: Tue May 8 15:57:43 2007 +0200 @@ -93,6 +564,18 @@ Date: Mon May 7 19:43:10 2007 +0200 fix: read and write MSR - repair number of parameters +commit 193b4a3bb3acaddf798da8de0da05d94ba8774ee +Author: Jeffrey Mann <mannj@embeddedplanet.com> +Date: Mon May 7 19:42:49 2007 +0200 + + [PATCH] ppc4xx: Fix CONFIG_SYS_CLK_FREQ definition in Sequoia config file + + A '3' got cut off in the formatting of the last patch to automatically + change the clock speed of the system clock on sequoia board. + + Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com> + Signed-off-by: Stefan Roese <sr@denx.de> + commit 19bf1fbad7f19d5a120be9b1daf136e052fcab39 Author: Michal Simek <monstr@monstr.eu> Date: Mon May 7 19:33:51 2007 +0200 @@ -75,22 +75,23 @@ LIST_8xx=" \ ######################################################################### LIST_4xx=" \ - acadia ADCIOP alpr AP1000 \ - AR405 ASH405 bamboo bubinga \ - CANBT CMS700 CPCI2DP CPCI405 \ - CPCI4052 CPCI405AB CPCI405DT CPCI440 \ - CPCIISER4 CRAYL1 csb272 csb472 \ - DASA_SIM DP405 DU405 ebony \ - ERIC EXBITGEN G2000 HH405 \ - HUB405 JSE KAREF katmai \ - luan METROBOX MIP405 MIP405T \ - ML2 ml300 ocotea OCRTC \ - ORSG p3p440 PCI405 pcs440ep \ - PIP405 PLU405 PMC405 PPChameleonEVB \ - sbc405 sc3 sequoia sequoia_nand \ - taishan VOH405 VOM405 W7OLMC \ - W7OLMG walnut WUH405 XPEDITE1K \ - yellowstone yosemite yucca \ + acadia acadia_nand ADCIOP alpr \ + AP1000 AR405 ASH405 bamboo \ + bamboo_nand bubinga CANBT CMS700 \ + CPCI2DP CPCI405 CPCI4052 CPCI405AB \ + CPCI405DT CPCI440 CPCIISER4 CRAYL1 \ + csb272 csb472 DASA_SIM DP405 \ + DU405 ebony ERIC EXBITGEN \ + G2000 HH405 HUB405 JSE \ + KAREF katmai luan METROBOX \ + MIP405 MIP405T ML2 ml300 \ + ocotea OCRTC ORSG p3p440 \ + PCI405 pcs440ep PIP405 PLU405 \ + PMC405 PPChameleonEVB sbc405 sc3 \ + sequoia sequoia_nand taishan VOH405 \ + VOM405 W7OLMC W7OLMG walnut \ + WUH405 XPEDITE1K yellowstone yosemite \ + yucca \ " ######################################################################### @@ -185,7 +186,7 @@ LIST_SA="assabet dnp1110 gcplus lart shannon" LIST_ARM7=" \ armadillo B2 ep7312 evb4510 \ impa7 integratorap ap7 ap720t \ - lpc2292sodimm modnet50 \ + lpc2292sodimm modnet50 SMN42 \ " ######################################################################### @@ -173,9 +173,6 @@ endif ifeq ($(CPU),mpc85xx) OBJS += cpu/$(CPU)/resetvec.o endif -ifeq ($(CPU),mpc86xx) -OBJS += cpu/$(CPU)/resetvec.o -endif ifeq ($(CPU),bf533) OBJS += cpu/$(CPU)/start1.o cpu/$(CPU)/interrupt.o cpu/$(CPU)/cache.o OBJS += cpu/$(CPU)/flush.o cpu/$(CPU)/init_sdram.o @@ -1017,6 +1014,15 @@ xtract_4xx = $(subst _25,,$(subst _33,,$(subst _BA,,$(subst _ME,,$(subst _HI,,$( acadia_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx acadia amcc +acadia_nand_config: unconfig + @mkdir -p $(obj)include + @mkdir -p $(obj)nand_spl + @mkdir -p $(obj)board/amcc/acadia + @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h + @$(MKCONFIG) -n $@ -a acadia ppc ppc4xx acadia amcc + @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/acadia/config.tmp + @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk + ADCIOP_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx adciop esd @@ -1038,6 +1044,15 @@ ASH405_config: unconfig bamboo_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx bamboo amcc +bamboo_nand_config: unconfig + @mkdir -p $(obj)include + @mkdir -p $(obj)nand_spl + @mkdir -p $(obj)board/amcc/bamboo + @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h + @$(MKCONFIG) -n $@ -a bamboo ppc ppc4xx bamboo amcc + @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/bamboo/config.tmp + @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk + bubinga_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx bubinga amcc @@ -1792,8 +1807,16 @@ sbc8560_66_config: unconfig stxgp3_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc85xx stxgp3 -stxssa_config: unconfig - @$(MKCONFIG) $(@:_config=) ppc mpc85xx stxssa +stxssa_config \ +stxssa_4M_config: unconfig + @mkdir -p $(obj)include + @if [ "$(findstring _4M_,$@)" ] ; then \ + echo "#define CONFIG_STXSSA_4M" >>$(obj)include/config.h ; \ + echo "... with 4 MiB flash memory" ; \ + else \ + >$(obj)include/config.h ; \ + fi + @$(MKCONFIG) -a stxssa ppc mpc85xx stxssa TQM8540_config \ TQM8541_config \ @@ -2113,7 +2136,10 @@ evb4510_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm720t evb4510 lpc2292sodimm_config: unconfig - @$(MKCONFIG) $(@:_config=) arm arm720t lpc2292sodimm + @$(MKCONFIG) $(@:_config=) arm arm720t lpc2292sodimm NULL lpc2292 + +SMN42_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm720t SMN42 siemens lpc2292 ######################################################################### ## XScale Systems diff --git a/board/amcc/acadia/Makefile b/board/amcc/acadia/Makefile index abcbf3e439..ddbcb8091f 100644 --- a/board/amcc/acadia/Makefile +++ b/board/amcc/acadia/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o cpr.o memory.o +COBJS = $(BOARD).o cmd_acadia.o cpr.o memory.o SOBJS = SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) diff --git a/board/amcc/acadia/acadia.c b/board/amcc/acadia/acadia.c index 3b63c8a741..46d63e6308 100644 --- a/board/amcc/acadia/acadia.c +++ b/board/amcc/acadia/acadia.c @@ -63,8 +63,14 @@ int board_early_init_f(void) acadia_gpio_init(); /* Configure 405EZ for NAND usage */ - mtsdr(sdrnand0, 0x80c00000); - mtsdr(sdrultra0, 0x8d110000); + mtsdr(sdrnand0, SDR_NAND0_NDEN | SDR_NAND0_NDAREN | SDR_NAND0_NDRBEN); + mfsdr(sdrultra0, reg); + reg &= ~SDR_ULTRA0_CSN_MASK; + reg |= (SDR_ULTRA0_CSNSEL0 >> CFG_NAND_CS) | + SDR_ULTRA0_NDGPIOBP | + SDR_ULTRA0_EBCRDYEN | + SDR_ULTRA0_NFSRSTEN; + mtsdr(sdrultra0, reg); /* USB Host core needs this bit set */ mfsdr(sdrultra1, reg); diff --git a/board/amcc/acadia/cmd_acadia.c b/board/amcc/acadia/cmd_acadia.c new file mode 100644 index 0000000000..fb7ea35954 --- /dev/null +++ b/board/amcc/acadia/cmd_acadia.c @@ -0,0 +1,101 @@ +/* + * (C) Copyright 2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#include <common.h> +#include <command.h> +#include <i2c.h> + +static u8 boot_267_nor[] = { + 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x8e, 0x00, + 0x14, 0xc0, 0x36, 0xcc, 0x00, 0x0c, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00 +}; + +static u8 boot_267_nand[] = { + 0xd0, 0x38, 0xc3, 0x50, 0x13, 0x88, 0x8e, 0x00, + 0x14, 0xc0, 0x36, 0xcc, 0x00, 0x0c, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00 +}; + +static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + u8 chip; + u8 *buf; + int cpu_freq; + + if (argc < 3) { + printf("Usage:\n%s\n", cmdtp->usage); + return 1; + } + + cpu_freq = simple_strtol(argv[1], NULL, 10); + if (cpu_freq != 267) { + printf("Unsupported cpu-frequency - only 267 supported\n"); + return 1; + } + + /* use 0x50 as I2C EEPROM address for now */ + chip = 0x50; + + if ((strcmp(argv[2], "nor") != 0) && + (strcmp(argv[2], "nand") != 0)) { + printf("Unsupported boot-device - only nor|nand support\n"); + return 1; + } + + if (strcmp(argv[2], "nand") == 0) { + switch (cpu_freq) { + case 267: + buf = boot_267_nand; + break; + default: + break; + } + } else { + switch (cpu_freq) { + case 267: + buf = boot_267_nor; + break; + default: + break; + } + } + + if (i2c_write(chip, 0, 1, buf, 16) != 0) + printf("Error writing to EEPROM at address 0x%x\n", chip); + udelay(CFG_EEPROM_PAGE_WRITE_DELAY_MS * 1000); + if (i2c_write(chip, 0x10, 1, buf+16, 4) != 0) + printf("Error2 writing to EEPROM at address 0x%x\n", chip); + + printf("Done\n"); + printf("Please power-cycle the board for the changes to take effect\n"); + + return 0; +} + +U_BOOT_CMD( + bootstrap, 3, 0, do_bootstrap, + "bootstrap - program the I2C bootstrap EEPROM\n", + "<cpu-freq> <nor|nand> - program the I2C bootstrap EEPROM\n" + ); diff --git a/board/amcc/acadia/config.mk b/board/amcc/acadia/config.mk index c8566ecc7b..af5a46c2a5 100644 --- a/board/amcc/acadia/config.mk +++ b/board/amcc/acadia/config.mk @@ -21,6 +21,12 @@ # MA 02111-1307 USA # +# +# AMCC 405EZ Reference Platform (Acadia) board +# + +sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp + ifndef TEXT_BASE TEXT_BASE = 0xFFFC0000 endif diff --git a/board/amcc/acadia/memory.c b/board/amcc/acadia/memory.c index 5375d36c9b..25904d3b94 100644 --- a/board/amcc/acadia/memory.c +++ b/board/amcc/acadia/memory.c @@ -39,6 +39,7 @@ void sdram_init(void) return; } +#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) static void cram_bcr_write(u32 wr_val) { wr_val <<= 2; @@ -62,9 +63,12 @@ static void cram_bcr_write(u32 wr_val) return; } +#endif long int initdram(int board_type) { +#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) + int i; u32 val; /* 1. EBC need to program READY, CLK, ADV for ASync mode */ @@ -92,7 +96,12 @@ long int initdram(int board_type) /* Config EBC to use RDY */ mfsdr(sdrultra0, val); - mtsdr(sdrultra0, val | 0x04000000); + mtsdr(sdrultra0, val | SDR_ULTRA0_EBCRDYEN); + + /* Wait a short while, since for NAND booting this is too fast */ + for (i=0; i<200000; i++) + ; +#endif return (CFG_MBYTES_RAM << 20); } diff --git a/board/amcc/acadia/u-boot-nand.lds b/board/amcc/acadia/u-boot-nand.lds new file mode 100644 index 0000000000..a5dae0e98c --- /dev/null +++ b/board/amcc/acadia/u-boot-nand.lds @@ -0,0 +1,137 @@ +/* + * (C) Copyright 2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/ppc4xx/start.o (.text) + + /* Align to next NAND block */ + . = ALIGN(0x4000); + common/environment.o (.ppcenv) + /* Keep some space here for redundant env and potential bad env blocks */ + . = ALIGN(0x10000); + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + + _end = . ; + PROVIDE (end = .); +} diff --git a/board/amcc/bamboo/Makefile b/board/amcc/bamboo/Makefile index 5da96e9e1c..d01cc49e2c 100644 --- a/board/amcc/bamboo/Makefile +++ b/board/amcc/bamboo/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2002-2006 +# (C) Copyright 2002-2007 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -33,7 +33,7 @@ OBJS := $(addprefix $(obj),$(COBJS)) SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) clean: rm -f $(SOBJS) $(OBJS) diff --git a/board/amcc/bamboo/bamboo.c b/board/amcc/bamboo/bamboo.c index 6260b016df..2e651df3b7 100644 --- a/board/amcc/bamboo/bamboo.c +++ b/board/amcc/bamboo/bamboo.c @@ -1,5 +1,5 @@ /* - * (C) Copyright 2005 + * (C) Copyright 2005-2007 * Stefan Roese, DENX Software Engineering, sr@denx.de. * * See file CREDITS for list of people who contributed to this @@ -291,6 +291,7 @@ int checkboard(void) return (0); } +#if !(defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)) /************************************************************************* * * init_spd_array -- Bamboo has one bank onboard sdram (plus DIMM) @@ -345,10 +346,12 @@ static void init_spd_array(void) cfg_simulate_spd_eeprom[25] = 0x00; /* SDRAM Cycle Time (cas latency 1.5) = N.A */ cfg_simulate_spd_eeprom[12] = 0x82; /* refresh Rate Type: Normal (15.625us) + Self refresh */ } +#endif long int initdram (int board_type) { - long dram_size = 0; +#if !(defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)) + long dram_size; /* * First write simulated values in eeprom array for onboard bank 0 @@ -358,6 +361,9 @@ long int initdram (int board_type) dram_size = spd_sdram(); return dram_size; +#else + return CFG_MBYTES_SDRAM << 20; +#endif } #if defined(CFG_DRAM_TEST) @@ -881,11 +887,11 @@ void ext_bus_cntlr_init(void) /*------------------------------------------------------------------------- */ case BOOT_FROM_NAND_FLASH0: /*------------------------------------------------------------------------- */ - ebc0_cs0_bnap_value = 0; - ebc0_cs0_bncr_value = 0; + ebc0_cs0_bnap_value = EBC0_BNAP_NAND_FLASH; + ebc0_cs0_bncr_value = EBC0_BNCR_NAND_FLASH_CS1; - ebc0_cs1_bnap_value = EBC0_BNAP_NAND_FLASH; - ebc0_cs1_bncr_value = EBC0_BNCR_NAND_FLASH_CS1; + ebc0_cs1_bnap_value = 0; + ebc0_cs1_bncr_value = 0; ebc0_cs2_bnap_value = 0; ebc0_cs2_bncr_value = 0; ebc0_cs3_bnap_value = 0; @@ -1409,10 +1415,10 @@ void update_ndfc_ios(void) gpio_tab[GPIO0][6].in_out = GPIO_OUT; /* EBC_CS_N(1) */ gpio_tab[GPIO0][6].alt_nb = GPIO_ALT1; -#if 0 gpio_tab[GPIO0][7].in_out = GPIO_OUT; /* EBC_CS_N(2) */ gpio_tab[GPIO0][7].alt_nb = GPIO_ALT1; +#if 0 gpio_tab[GPIO0][7].in_out = GPIO_OUT; /* EBC_CS_N(3) */ gpio_tab[GPIO0][7].alt_nb = GPIO_ALT1; #endif @@ -1900,12 +1906,21 @@ void configure_ppc440ep_pins(void) { update_ndfc_ios(); +#if !(defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)) mtsdr(sdr_cust0, SDR0_CUST0_MUX_NDFC_SEL | SDR0_CUST0_NDFC_ENABLE | SDR0_CUST0_NDFC_BW_8_BIT | SDR0_CUST0_NDFC_ARE_MASK | SDR0_CUST0_CHIPSELGAT_EN1 | SDR0_CUST0_CHIPSELGAT_EN2); +#else + mtsdr(sdr_cust0, SDR0_CUST0_MUX_NDFC_SEL | + SDR0_CUST0_NDFC_ENABLE | + SDR0_CUST0_NDFC_BW_8_BIT | + SDR0_CUST0_NDFC_ARE_MASK | + SDR0_CUST0_CHIPSELGAT_EN0 | + SDR0_CUST0_CHIPSELGAT_EN2); +#endif ndfc_selection_in_fpga(); } diff --git a/board/amcc/bamboo/config.mk b/board/amcc/bamboo/config.mk index 9d7f4c3105..b46527dcc5 100644 --- a/board/amcc/bamboo/config.mk +++ b/board/amcc/bamboo/config.mk @@ -1,5 +1,5 @@ # -# (C) Copyright 2002-2006 +# (C) Copyright 2002-2007 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -21,7 +21,11 @@ # MA 02111-1307 USA # +sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp + +ifndef TEXT_BASE TEXT_BASE = 0xFFFA0000 +endif PLATFORM_CPPFLAGS += -DCONFIG_440=1 diff --git a/board/amcc/bamboo/flash.c b/board/amcc/bamboo/flash.c index a30ab7ada8..8a2e832cf4 100644 --- a/board/amcc/bamboo/flash.c +++ b/board/amcc/bamboo/flash.c @@ -53,7 +53,7 @@ flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ static unsigned long flash_addr_table[][CFG_MAX_FLASH_BANKS] = { {0x87800001, 0xFFF00000, 0xFFF80000}, /* 0:boot from small flash */ {0x00000000, 0x00000000, 0x00000000}, /* 1:boot from pci 66 */ - {0x00000000, 0x00000000, 0x00000000}, /* 2:boot from nand flash */ + {0x87800001, 0x00000000, 0x00000000}, /* 0:boot from nand flash */ {0x87F00000, 0x87F80000, 0xFFC00001}, /* 3:boot from big flash 33*/ {0x87F00000, 0x87F80000, 0xFFC00001}, /* 4:boot from big flash 66*/ {0x00000000, 0x00000000, 0x00000000}, /* 5:boot from */ @@ -134,10 +134,10 @@ unsigned long flash_init(void) flash_info[i].size = 0; /* check whether the address is 0 */ - if (flash_addr_table[index][i] == 0) { + if (flash_addr_table[index][i] == 0) continue; - } + DEBUGF("Detection bank %d...\n", i); /* call flash_get_size() to initialize sector address */ size_b[i] = flash_get_size((vu_long *) flash_addr_table[index][i], &flash_info[i]); diff --git a/board/amcc/bamboo/init.S b/board/amcc/bamboo/init.S index 7820107aa5..1459eec363 100644 --- a/board/amcc/bamboo/init.S +++ b/board/amcc/bamboo/init.S @@ -1,74 +1,31 @@ /* -* -* See file CREDITS for list of people who contributed to this -* project. -* -* This program is free software; you can redistribute it and/or -* modify it under the terms of the GNU General Public License as -* published by the Free Software Foundation; either version 2 of -* the License, or (at your option) any later version. -* -* This program is distributed in the hope that it will be useful, -* but WITHOUT ANY WARRANTY; without even the implied warranty of -* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -* GNU General Public License for more details. -* -* You should have received a copy of the GNU General Public License -* along with this program; if not, write to the Free Software -* Foundation, Inc., 59 Temple Place, Suite 330, Boston, -* MA 02111-1307 USA -*/ + * (C) Copyright 2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ #include <ppc_asm.tmpl> #include <config.h> - -/* General */ -#define TLB_VALID 0x00000200 - -/* Supported page sizes */ - -#define SZ_1K 0x00000000 -#define SZ_4K 0x00000010 -#define SZ_16K 0x00000020 -#define SZ_64K 0x00000030 -#define SZ_256K 0x00000040 -#define SZ_1M 0x00000050 -#define SZ_8M 0x00000060 -#define SZ_16M 0x00000070 -#define SZ_256M 0x00000090 - -/* Storage attributes */ -#define SA_W 0x00000800 /* Write-through */ -#define SA_I 0x00000400 /* Caching inhibited */ -#define SA_M 0x00000200 /* Memory coherence */ -#define SA_G 0x00000100 /* Guarded */ -#define SA_E 0x00000080 /* Endian */ - -/* Access control */ -#define AC_X 0x00000024 /* Execute */ -#define AC_W 0x00000012 /* Write */ -#define AC_R 0x00000009 /* Read */ - -/* Some handy macros */ - -#define EPN(e) ((e) & 0xfffffc00) -#define TLB0(epn,sz) ( (EPN((epn)) | (sz) | TLB_VALID ) ) -#define TLB1(rpn,erpn) ( ((rpn)&0xfffffc00) | (erpn) ) -#define TLB2(a) ( (a)&0x00000fbf ) - -#define tlbtab_start\ - mflr r1 ;\ - bl 0f ; - -#define tlbtab_end\ - .long 0, 0, 0 ; \ -0: mflr r0 ; \ - mtlr r1 ; \ - blr ; - -#define tlbentry(epn,sz,rpn,erpn,attr)\ - .long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr) - +#include <asm-ppc/mmu.h> /************************************************************************** * TLB TABLE @@ -80,34 +37,68 @@ * Pointer to the table is returned in r1 * *************************************************************************/ - - .section .bootpg,"ax" - .globl tlbtab + .section .bootpg,"ax" + .globl tlbtab tlbtab: - tlbtab_start - - /* - * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the - * speed up boot process. It is patched after relocation to enable SA_I - */ - tlbentry( CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_G/*|SA_I*/) - - /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */ - tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G ) - - tlbentry( CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I ) - tlbentry( CFG_PCI_BASE, SZ_256M, CFG_PCI_BASE, 0, AC_R|AC_W|SA_G|SA_I ) - tlbentry( CFG_NVRAM_BASE_ADDR, SZ_256M, CFG_NVRAM_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_W|SA_I ) - tlbentry( CFG_NAND_ADDR, SZ_256M, CFG_NAND_ADDR, 0, AC_R|AC_W|AC_X|SA_W|SA_I ) - - /* PCI */ - tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 0, AC_R|AC_W|SA_G|SA_I ) - tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 0, AC_R|AC_W|SA_G|SA_I ) - tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 0, AC_R|AC_W|SA_G|SA_I ) - tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 0, AC_R|AC_W|SA_G|SA_I ) - - /* USB 2.0 Device */ - tlbentry( CFG_USB_DEVICE, SZ_1K, CFG_USB_DEVICE, 0, AC_R|AC_W|SA_G|SA_I ) - - tlbtab_end + tlbtab_start + + /* + * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the + * speed up boot process. It is patched after relocation to enable SA_I + */ +#ifndef CONFIG_NAND_SPL + tlbentry(CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_G) +#else + tlbentry(CFG_NAND_BOOT_SPL_SRC, SZ_4K, CFG_NAND_BOOT_SPL_SRC, 0, AC_R|AC_W|AC_X|SA_G) +#endif + + /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */ + tlbentry(CFG_INIT_RAM_ADDR, SZ_4K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G) + + tlbentry(CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I) + + /* PCI base & peripherals */ + tlbentry(CFG_PCI_BASE, SZ_256M, CFG_PCI_BASE, 0, AC_R|AC_W|SA_G|SA_I) + + tlbentry(CFG_NVRAM_BASE_ADDR, SZ_256M, CFG_NVRAM_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_W|SA_I) + tlbentry(CFG_NAND_ADDR, SZ_4K, CFG_NAND_ADDR, 0, AC_R|AC_W|AC_X|SA_W|SA_I) + + /* PCI */ + tlbentry(CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 0, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 0, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 0, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 0, AC_R|AC_W|SA_G|SA_I) + + /* USB 2.0 Device */ + tlbentry(CFG_USB_DEVICE, SZ_1K, CFG_USB_DEVICE, 0, AC_R|AC_W|SA_G|SA_I) + + tlbtab_end + +#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) + /* + * For NAND booting the first TLB has to be reconfigured to full size + * and with caching disabled after running from RAM! + */ +#define TLB00 TLB0(CFG_BOOT_BASE_ADDR, SZ_256M) +#define TLB01 TLB1(CFG_BOOT_BASE_ADDR, 0) +#define TLB02 TLB2(AC_R|AC_W|AC_X|SA_G|SA_I) + + .globl reconfig_tlb0 +reconfig_tlb0: + sync + isync + addi r4,r0,0x0000 /* TLB entry #0 */ + lis r5,TLB00@h + ori r5,r5,TLB00@l + tlbwe r5,r4,0x0000 /* Save it out */ + lis r5,TLB01@h + ori r5,r5,TLB01@l + tlbwe r5,r4,0x0001 /* Save it out */ + lis r5,TLB02@h + ori r5,r5,TLB02@l + tlbwe r5,r4,0x0002 /* Save it out */ + sync + isync + blr +#endif diff --git a/board/amcc/bamboo/u-boot-nand.lds b/board/amcc/bamboo/u-boot-nand.lds new file mode 100644 index 0000000000..a5dae0e98c --- /dev/null +++ b/board/amcc/bamboo/u-boot-nand.lds @@ -0,0 +1,137 @@ +/* + * (C) Copyright 2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/ppc4xx/start.o (.text) + + /* Align to next NAND block */ + . = ALIGN(0x4000); + common/environment.o (.ppcenv) + /* Keep some space here for redundant env and potential bad env blocks */ + . = ALIGN(0x10000); + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + + _end = . ; + PROVIDE (end = .); +} diff --git a/board/amcc/sequoia/sdram.c b/board/amcc/sequoia/sdram.c index d045df1872..78e2cb42a9 100644 --- a/board/amcc/sequoia/sdram.c +++ b/board/amcc/sequoia/sdram.c @@ -387,7 +387,11 @@ void denali_core_search_data_eye(unsigned long memory_size) long int initdram (int board_type) { #if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) +#if !defined(CONFIG_NAND_SPL) ulong speed = get_bus_freq(0); +#else + ulong speed = 133333333; /* 133MHz is on the safe side */ +#endif mtsdram(DDR0_02, 0x00000000); diff --git a/board/amcc/sequoia/sequoia.c b/board/amcc/sequoia/sequoia.c index 870401458e..ba365aea31 100644 --- a/board/amcc/sequoia/sequoia.c +++ b/board/amcc/sequoia/sequoia.c @@ -132,12 +132,6 @@ int board_early_init_f(void) (0x80000000 >> (28 + CFG_NAND_CS)); mtsdr(SDR0_CUST0, sdr0_cust0); - /* Update EBC speed after booting from i2c bootstrap settings - * on newer boards with 33.333 MHZ Clocks - */ - if (in8(CFG_BCSR_BASE + 3) & 0x80) - mtcpr(0xe0, 0x02000000); - return 0; } diff --git a/board/lpc2292sodimm/Makefile b/board/lpc2292sodimm/Makefile index 5a30198e21..18a95d7f9b 100644 --- a/board/lpc2292sodimm/Makefile +++ b/board/lpc2292sodimm/Makefile @@ -1,7 +1,6 @@ # -# (C) Copyright 2002 -# Sysgo Real-Time Solutions, GmbH <www.elinos.com> -# Marius Groeger <mgroeger@sysgo.de> +# (C) Copyright 2007 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this # project. @@ -24,35 +23,29 @@ include $(TOPDIR)/config.mk -LIB = lib$(BOARD).a +LIB = $(obj)lib$(BOARD).a -OBJS := lpc2292sodimm.o flash.o mmc.o spi.o mmc_hw.o eth.o -SOBJS := lowlevel_init.o iap_entry.o +COBJS := flash.o lpc2292sodimm.o +SOBJTS := lowlevel_init.o -$(LIB): $(OBJS) $(SOBJS) - $(AR) crv $@ $(OBJS) $(SOBJS) +SRCS := $(SOBJTS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJTS)) -# this MUST be compiled as thumb code! -iap_entry.o: - arm-linux-gcc -D__ASSEMBLY__ -g -Os -fno-strict-aliasing \ - -fno-common -ffixed-r8 -msoft-float -D__KERNEL__ \ - -DTEXT_BASE=0x81500000 -I/home/garyj/proj/LPC/u-boot/include \ - -fno-builtin -ffreestanding -nostdinc -isystem \ - /opt/eldk/arm/usr/bin/../lib/gcc/arm-linux/4.0.0/include -pipe \ - -DCONFIG_ARM -D__ARM__ -march=armv4t -mtune=arm7tdmi -mabi=apcs-gnu \ - -c -o iap_entry.o iap_entry.S +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) $(SOBJS) clean: rm -f $(SOBJS) $(OBJS) distclean: clean - rm -f $(LIB) core *.bak .depend + rm -f $(LIB) core *.bak $(obj).depend ######################################################################### -.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) - $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ +# defines $(obj).depend target +include $(SRCTREE)/rules.mk --include .depend +sinclude $(obj).depend ######################################################################### diff --git a/board/lpc2292sodimm/flash.c b/board/lpc2292sodimm/flash.c index 55aaabfe6f..0fb08430c5 100644 --- a/board/lpc2292sodimm/flash.c +++ b/board/lpc2292sodimm/flash.c @@ -1,6 +1,9 @@ /* * (C) Copyright 2006 Embedded Artists AB <www.embeddedartists.com> * + * Modified to use the routines in cpu/arm720t/lpc2292/flash.c by + * Gary Jennejohn <garyj@denx,de> + * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of @@ -20,84 +23,16 @@ #include <common.h> #include <asm/arch/hardware.h> -/* IAP commands use 32 bytes at the top of CPU internal sram, we - use 512 bytes below that */ -#define COPY_BUFFER_LOCATION 0x40003de0 - -#define IAP_LOCATION 0x7ffffff1 -#define IAP_CMD_PREPARE 50 -#define IAP_CMD_COPY 51 -#define IAP_CMD_ERASE 52 -#define IAP_CMD_CHECK 53 -#define IAP_CMD_ID 54 -#define IAP_CMD_VERSION 55 -#define IAP_CMD_COMPARE 56 - -#define IAP_RET_CMD_SUCCESS 0 - #define SST_BASEADDR 0x80000000 #define SST_ADDR1 ((volatile ushort*)(SST_BASEADDR + (0x5555 << 1))) #define SST_ADDR2 ((volatile ushort*)(SST_BASEADDR + (0x2AAA << 1))) -static unsigned long command[5]; -static unsigned long result[2]; - flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; -extern void iap_entry(unsigned long * command, unsigned long * result); - -/*----------------------------------------------------------------------- - * - */ -int get_flash_sector(flash_info_t * info, ulong flash_addr) -{ - int i; - - for(i=1; i < (info->sector_count); i++) { - if (flash_addr < (info->start[i])) - break; - } - - return (i-1); -} - -/*----------------------------------------------------------------------- - * This function assumes that flash_addr is aligned on 512 bytes boundary - * in flash. This function also assumes that prepare have been called - * for the sector in question. - */ -int copy_buffer_to_flash(flash_info_t * info, ulong flash_addr) -{ - int first_sector; - int last_sector; - - first_sector = get_flash_sector(info, flash_addr); - last_sector = get_flash_sector(info, flash_addr + 512 - 1); - - /* prepare sectors for write */ - command[0] = IAP_CMD_PREPARE; - command[1] = first_sector; - command[2] = last_sector; - iap_entry(command, result); - if (result[0] != IAP_RET_CMD_SUCCESS) { - printf("IAP prepare failed\n"); - return ERR_PROG_ERROR; - } - - command[0] = IAP_CMD_COPY; - command[1] = flash_addr; - command[2] = COPY_BUFFER_LOCATION; - command[3] = 512; - command[4] = CFG_SYS_CLK_FREQ >> 10; - iap_entry(command, result); - if (result[0] != IAP_RET_CMD_SUCCESS) { - printf("IAP copy failed\n"); - return 1; - } - - return 0; -} +extern int lpc2292_copy_buffer_to_flash(flash_info_t *, ulong); +extern int lpc2292_flash_erase(flash_info_t *, int, int); +extern int lpc2292_write_buff (flash_info_t *, uchar *, ulong, ulong); /*----------------------------------------------------------------------- * @@ -220,56 +155,6 @@ void flash_print_info (flash_info_t * info) printf ("\n"); } -/*----------------------------------------------------------------------- - */ - -int flash_erase_philips (flash_info_t * info, int s_first, int s_last) -{ - int flag; - int prot; - int sect; - - prot = 0; - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - if (prot) - return ERR_PROTECTED; - - - flag = disable_interrupts(); - - printf ("Erasing %d sectors starting at sector %2d.\n" - "This make take some time ... ", - s_last - s_first + 1, s_first); - - command[0] = IAP_CMD_PREPARE; - command[1] = s_first; - command[2] = s_last; - iap_entry(command, result); - if (result[0] != IAP_RET_CMD_SUCCESS) { - printf("IAP prepare failed\n"); - return ERR_PROTECTED; - } - - command[0] = IAP_CMD_ERASE; - command[1] = s_first; - command[2] = s_last; - command[3] = CFG_SYS_CLK_FREQ >> 10; - iap_entry(command, result); - if (result[0] != IAP_RET_CMD_SUCCESS) { - printf("IAP erase failed\n"); - return ERR_PROTECTED; - } - - if (flag) - enable_interrupts(); - - return ERR_OK; -} - int flash_erase_sst (flash_info_t * info, int s_first, int s_last) { int i; @@ -294,7 +179,7 @@ int flash_erase (flash_info_t * info, int s_first, int s_last) case (SST_MANUFACT & FLASH_VENDMASK): return flash_erase_sst(info, s_first, s_last); case (PHILIPS_LPC2292 & FLASH_VENDMASK): - return flash_erase_philips(info, s_first, s_last); + return lpc2292_flash_erase(info, s_first, s_last); default: return ERR_PROTECTED; } @@ -353,122 +238,13 @@ int write_buff_sst (flash_info_t * info, uchar * src, ulong addr, ulong cnt) return ret; } -int write_buff_philips (flash_info_t * info, - uchar * src, - ulong addr, - ulong cnt) -{ - int first_copy_size; - int last_copy_size; - int first_block; - int last_block; - int nbr_mid_blocks; - uchar memmap_value; - ulong i; - uchar* src_org; - uchar* dst_org; - int ret = ERR_OK; - - src_org = src; - dst_org = (uchar*)addr; - - first_block = addr / 512; - last_block = (addr + cnt) / 512; - nbr_mid_blocks = last_block - first_block - 1; - - first_copy_size = 512 - (addr % 512); - last_copy_size = (addr + cnt) % 512; - -#if 0 - printf("\ncopy first block: (1) %lX -> %lX 0x200 bytes, " - "(2) %lX -> %lX 0x%X bytes, (3) %lX -> %lX 0x200 bytes\n", - (ulong)(first_block * 512), - (ulong)COPY_BUFFER_LOCATION, - (ulong)src, - (ulong)(COPY_BUFFER_LOCATION + 512 - first_copy_size), - first_copy_size, - (ulong)COPY_BUFFER_LOCATION, - (ulong)(first_block * 512)); -#endif - - /* copy first block */ - memcpy((void*)COPY_BUFFER_LOCATION, - (void*)(first_block * 512), 512); - memcpy((void*)(COPY_BUFFER_LOCATION + 512 - first_copy_size), - src, first_copy_size); - copy_buffer_to_flash(info, first_block * 512); - src += first_copy_size; - addr += first_copy_size; - - /* copy middle blocks */ - for (i = 0; i < nbr_mid_blocks; i++) { -#if 0 - printf("copy middle block: %lX -> %lX 512 bytes, " - "%lX -> %lX 512 bytes\n", - (ulong)src, - (ulong)COPY_BUFFER_LOCATION, - (ulong)COPY_BUFFER_LOCATION, - (ulong)addr); -#endif - memcpy((void*)COPY_BUFFER_LOCATION, src, 512); - copy_buffer_to_flash(info, addr); - src += 512; - addr += 512; - } - - - if (last_copy_size > 0) { -#if 0 - printf("copy last block: (1) %lX -> %lX 0x200 bytes, " - "(2) %lX -> %lX 0x%X bytes, (3) %lX -> %lX x200 bytes\n", - (ulong)(last_block * 512), - (ulong)COPY_BUFFER_LOCATION, - (ulong)src, - (ulong)(COPY_BUFFER_LOCATION), - last_copy_size, - (ulong)COPY_BUFFER_LOCATION, - (ulong)addr); -#endif - /* copy last block */ - memcpy((void*)COPY_BUFFER_LOCATION, - (void*)(last_block * 512), 512); - memcpy((void*)COPY_BUFFER_LOCATION, - src, last_copy_size); - copy_buffer_to_flash(info, addr); - } - - /* verify write */ - memmap_value = GET8(MEMMAP); - - disable_interrupts(); - - PUT8(MEMMAP, 01); /* we must make sure that initial 64 - bytes are taken from flash when we - do the compare */ - - for (i = 0; i < cnt; i++) { - if (*dst_org != *src_org){ - printf("Write failed. Byte %lX differs\n", i); - ret = ERR_PROG_ERROR; - break; - } - dst_org++; - src_org++; - } - - PUT8(MEMMAP, memmap_value); - enable_interrupts(); - - return ret; -} - int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) { switch (info->flash_id & FLASH_VENDMASK) { case (SST_MANUFACT & FLASH_VENDMASK): return write_buff_sst(info, src, addr, cnt); case (PHILIPS_LPC2292 & FLASH_VENDMASK): - return write_buff_philips(info, src, addr, cnt); + return lpc2292_write_buff(info, src, addr, cnt); default: return ERR_PROG_ERROR; } diff --git a/board/mpc8641hpcn/Makefile b/board/mpc8641hpcn/Makefile index 9625211669..df56b31e58 100644 --- a/board/mpc8641hpcn/Makefile +++ b/board/mpc8641hpcn/Makefile @@ -23,6 +23,10 @@ include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../freescale/common) +endif + LIB = $(obj)lib$(BOARD).a COBJS := $(BOARD).o sys_eeprom.o \ diff --git a/board/mpc8641hpcn/config.mk b/board/mpc8641hpcn/config.mk index 989a40b015..f778dcbe0c 100644 --- a/board/mpc8641hpcn/config.mk +++ b/board/mpc8641hpcn/config.mk @@ -25,7 +25,7 @@ # default CCSRBAR is at 0xff700000 # assume U-Boot is less than 0.5MB # -TEXT_BASE = 0xfff01000 +TEXT_BASE = 0xfff00000 PLATFORM_CPPFLAGS += -DCONFIG_MPC86xx=1 PLATFORM_CPPFLAGS += -DCONFIG_MPC8641=1 -maltivec -mabi=altivec -msoft-float diff --git a/board/mpc8641hpcn/u-boot.lds b/board/mpc8641hpcn/u-boot.lds index 13c1acf803..34b50e4be2 100644 --- a/board/mpc8641hpcn/u-boot.lds +++ b/board/mpc8641hpcn/u-boot.lds @@ -1,7 +1,5 @@ /* - * (C) Copyright 2004, Freescale, Inc. - * (C) Copyright 2002,2003, Motorola,Inc. - * Jeff Brown + * Copyright 2006, 2007 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -23,24 +21,11 @@ */ OUTPUT_ARCH(powerpc) -SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); -/* Do we need any of these for elf? - __DYNAMIC = 0; */ + SECTIONS { - .resetvec 0xFFF00100 : - { - *(.resetvec) - } = 0xffff - - .bootpg 0xFFF70000 : - { - cpu/mpc86xx/start.o (.bootpg) - board/mpc8641hpcn/init.o (.bootpg) - } = 0xffff /* Read-only sections, merged into text segment: */ - . = + 1024; .interp : { *(.interp) } .hash : { *(.hash) } .dynsym : { *(.dynsym) } @@ -66,7 +51,7 @@ SECTIONS .text : { cpu/mpc86xx/start.o (.text) - board/mpc8641hpcn/init.o (.text) + board/mpc8641hpcn/init.o (.bootpg) cpu/mpc86xx/traps.o (.text) cpu/mpc86xx/interrupts.o (.text) cpu/mpc86xx/cpu_init.o (.text) @@ -88,6 +73,7 @@ SECTIONS *(.rodata) *(.rodata1) *(.rodata.str1.4) + *(.eh_frame) } .fini : { *(.fini) } =0 .ctors : { *(.ctors) } diff --git a/board/siemens/SMN42/Makefile b/board/siemens/SMN42/Makefile new file mode 100644 index 0000000000..2c7b54b081 --- /dev/null +++ b/board/siemens/SMN42/Makefile @@ -0,0 +1,51 @@ +# +# (C) Copyright 2007 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := flash.o smn42.o +SOBJTS := lowlevel_init.o + +SRCS := $(SOBJTS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJTS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/siemens/SMN42/config.mk b/board/siemens/SMN42/config.mk new file mode 100644 index 0000000000..b28f418df7 --- /dev/null +++ b/board/siemens/SMN42/config.mk @@ -0,0 +1,30 @@ +# +# (C) Copyright 2000 +# Sysgo Real-Time Solutions, GmbH <www.elinos.com> +# Marius Groeger <mgroeger@sysgo.de> +# +# (C) Copyright 2000 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +#address where u-boot will be relocated +#TEXT_BASE = 0x0 +TEXT_BASE = 0x81500000 diff --git a/board/siemens/SMN42/flash.c b/board/siemens/SMN42/flash.c new file mode 100755 index 0000000000..7d4977e026 --- /dev/null +++ b/board/siemens/SMN42/flash.c @@ -0,0 +1,475 @@ +/* + * (C) Copyright 2006 Embedded Artists AB <www.embeddedartists.com> + * + * (C) Copyright 2007 Gary Jennejohn garyj@denx.de + * Modified to use the routines in cpu/arm720t/lpc2292/flash.c. + * Heavily modified to support the SMN42 board from Siemens + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/byteorder.h> +#include <asm/arch/hardware.h> + +static unsigned long flash_addr_table[CFG_MAX_FLASH_BANKS] = CFG_FLASH_BANKS_LIST; +flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; + +extern int lpc2292_copy_buffer_to_flash(flash_info_t *, ulong); +extern int lpc2292_flash_erase(flash_info_t *, int, int); +extern int lpc2292_write_buff (flash_info_t *, uchar *, ulong, ulong); +static unsigned long ext_flash_init(void); +static int ext_flash_erase(flash_info_t *, int, int); +static int ext_write_buff(flash_info_t *, uchar *, ulong, ulong); + +/*----------------------------------------------------------------------- + */ + +ulong flash_init (void) +{ + int j, k; + ulong size = 0; + ulong flashbase = 0; + + flash_info[0].flash_id = PHILIPS_LPC2292; + flash_info[0].size = 0x003E000; /* 256 - 8 KB */ + flash_info[0].sector_count = 17; + memset (flash_info[0].protect, 0, 17); + flashbase = 0x00000000; + for (j = 0, k = 0; j < 8; j++, k++) { + flash_info[0].start[k] = flashbase; + flashbase += 0x00002000; + } + for (j = 0; j < 2; j++, k++) { + flash_info[0].start[k] = flashbase; + flashbase += 0x00010000; + } + for (j = 0; j < 7; j++, k++) { + flash_info[0].start[k] = flashbase; + flashbase += 0x00002000; + } + size += flash_info[0].size; + + /* Protect monitor and environment sectors */ + flash_protect (FLAG_PROTECT_SET, + 0x0, + 0x0 + monitor_flash_len - 1, + &flash_info[0]); + + flash_protect (FLAG_PROTECT_SET, + CFG_ENV_ADDR, + CFG_ENV_ADDR + CFG_ENV_SIZE - 1, + &flash_info[0]); + + size += ext_flash_init(); + + return size; +} + +/*----------------------------------------------------------------------- + */ +void flash_print_info (flash_info_t * info) +{ + int i; + int erased = 0; + unsigned long j; + unsigned long count; + unsigned char *p; + + switch (info->flash_id & FLASH_VENDMASK) { + case (PHILIPS_LPC2292 & FLASH_VENDMASK): + printf("Philips: "); + break; + case FLASH_MAN_AMD: + printf("AMD: "); + break; + default: + printf ("Unknown Vendor "); + break; + } + + switch (info->flash_id & FLASH_TYPEMASK) { + case (PHILIPS_LPC2292 & FLASH_TYPEMASK): + printf("LPC2292 internal flash\n"); + break; + case FLASH_S29GL128N: + printf ("S29GL128N (128 Mbit, uniform sector size)\n"); + break; + default: + printf("Unknown Chip Type\n"); + return; + } + + printf (" Size: %ld KB in %d Sectors\n", + info->size >> 10, info->sector_count); + + printf (" Sector Start Addresses:"); + for (i = 0; i < info->sector_count; i++) { + if ((i % 5) == 0) { + printf ("\n "); + } + if (i < (info->sector_count - 1)) { + count = info->start[i+1] - info->start[i]; + } + else { + count = info->start[0] + info->size - info->start[i]; + } + p = (unsigned char*)(info->start[i]); + erased = 1; + for (j = 0; j < count; j++) { + if (*p != 0xFF) { + erased = 0; + break; + } + p++; + } + printf (" %08lX%s%s", info->start[i], info->protect[i] ? " RO" : " ", + erased ? " E" : " "); + } + printf ("\n"); +} + +int flash_erase (flash_info_t * info, int s_first, int s_last) +{ + switch (info->flash_id & FLASH_TYPEMASK) { + case (PHILIPS_LPC2292 & FLASH_TYPEMASK): + return lpc2292_flash_erase(info, s_first, s_last); + case FLASH_S29GL128N: + return ext_flash_erase(info, s_first, s_last); + default: + return ERR_PROTECTED; + } + return ERR_PROTECTED; +} + +int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) +{ + switch (info->flash_id & FLASH_TYPEMASK) { + case (PHILIPS_LPC2292 & FLASH_TYPEMASK): + return lpc2292_write_buff(info, src, addr, cnt); + case FLASH_S29GL128N: + return ext_write_buff(info, src, addr, cnt); + default: + return ERR_PROG_ERROR; + } + return ERR_PROG_ERROR; +} + +/*-------------------------------------------------------------------------- + * From here on is code for the external S29GL128N taken from cam5200_flash.c + */ + +#define CFG_FLASH_WORD_SIZE unsigned short + +static int wait_for_DQ7_32(flash_info_t * info, int sect) +{ + ulong start, now, last; + volatile CFG_FLASH_WORD_SIZE *addr = + (CFG_FLASH_WORD_SIZE *) (info->start[sect]); + + start = get_timer(0); + last = start; + while ((addr[0] & (CFG_FLASH_WORD_SIZE) 0x00800080) != + (CFG_FLASH_WORD_SIZE) 0x00800080) { + if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) { + printf("Timeout\n"); + return -1; + } + /* show that we're waiting */ + if ((now - last) > 1000) { /* every second */ + putc('.'); + last = now; + } + } + return 0; +} + +int ext_flash_erase(flash_info_t * info, int s_first, int s_last) +{ + volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *) (info->start[0]); + volatile CFG_FLASH_WORD_SIZE *addr2; + int flag, prot, sect, l_sect, ret; + + ret = 0; + if ((s_first < 0) || (s_first > s_last)) { + if (info->flash_id == FLASH_UNKNOWN) + printf("- missing\n"); + else + printf("- no sectors to erase\n"); + return 1; + } + + if (info->flash_id == FLASH_UNKNOWN) { + printf("Can't erase unknown flash type - aborted\n"); + return 1; + } + + prot = 0; + for (sect = s_first; sect <= s_last; ++sect) { + if (info->protect[sect]) + prot++; + } + + if (prot) + printf("- Warning: %d protected sectors will not be erased!", prot); + + printf("\n"); + + l_sect = -1; + + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts(); + + /* Start erase on unprotected sectors */ + for (sect = s_first; sect <= s_last; sect++) { + if (info->protect[sect] == 0) { /* not protected */ + addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[sect]); + + addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA; + addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055; + addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080; + addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA; + addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055; + addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00300030; /* sector erase */ + + l_sect = sect; + /* + * Wait for each sector to complete, it's more + * reliable. According to AMD Spec, you must + * issue all erase commands within a specified + * timeout. This has been seen to fail, especially + * if printf()s are included (for debug)!! + */ + ret = wait_for_DQ7_32(info, sect); + if (ret) { + ret = ERR_PROTECTED; + break; + } + } + } + + /* re-enable interrupts if necessary */ + if (flag) + enable_interrupts(); + + /* wait at least 80us - let's wait 1 ms */ + udelay(1000); + + /* reset to read mode */ + addr = (CFG_FLASH_WORD_SIZE *) info->start[0]; + addr[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */ + + if (ret) + printf(" error\n"); + else + printf(" done\n"); + return ret; +} + +static ulong flash_get_size(vu_long * addr, flash_info_t * info) +{ + short i; + CFG_FLASH_WORD_SIZE value; + ulong base = (ulong) addr; + volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) addr; + + /* Write auto select command: read Manufacturer ID */ + addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA; + addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055; + addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00900090; + udelay(1000); + + value = addr2[0]; + + switch (value) { + case (CFG_FLASH_WORD_SIZE) AMD_MANUFACT: + info->flash_id = FLASH_MAN_AMD; + break; + default: + info->flash_id = FLASH_UNKNOWN; + info->sector_count = 0; + info->size = 0; + return (0); /* no or unknown flash */ + } + + value = addr2[1]; /* device ID */ + + switch (value) { + case (CFG_FLASH_WORD_SIZE)AMD_ID_MIRROR: + value = addr2[14]; + switch(value) { + case (CFG_FLASH_WORD_SIZE)AMD_ID_GL128N_2: + value = addr2[15]; + if (value != (CFG_FLASH_WORD_SIZE)AMD_ID_GL128N_3) { + info->flash_id = FLASH_UNKNOWN; + } else { + info->flash_id += FLASH_S29GL128N; + info->sector_count = 128; + info->size = 0x01000000; + } + break; + default: + info->flash_id = FLASH_UNKNOWN; + return(0); + } + break; + + default: + info->flash_id = FLASH_UNKNOWN; + return (0); /* => no or unknown flash */ + } + + /* set up sector start address table */ + for (i = 0; i < info->sector_count; i++) + info->start[i] = base + (i * 0x00020000); + + /* check for protected sectors */ + for (i = 0; i < info->sector_count; i++) { + /* read sector protection at sector address, (A7 .. A0) = 0x02 */ + /* D0 = 1 if protected */ + addr2 = (volatile CFG_FLASH_WORD_SIZE *)(info->start[i]); + + info->protect[i] = addr2[2] & 1; + } + + /* issue bank reset to return to read mode */ + addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0; + + return (info->size); +} + +static unsigned long ext_flash_init(void) +{ + unsigned long total_b = 0; + unsigned long size_b[CFG_MAX_FLASH_BANKS]; + int i; + + /* Init: no FLASHes known */ + for (i = 1; i < CFG_MAX_FLASH_BANKS; ++i) { + flash_info[i].flash_id = FLASH_UNKNOWN; + flash_info[i].sector_count = -1; + flash_info[i].size = 0; + + /* call flash_get_size() to initialize sector address */ + size_b[i] = flash_get_size((vu_long *) flash_addr_table[i], + &flash_info[i]); + + flash_info[i].size = size_b[i]; + + if (flash_info[i].flash_id == FLASH_UNKNOWN) { + printf("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n", + i+1, size_b[i], size_b[i] << 20); + flash_info[i].sector_count = -1; + flash_info[i].size = 0; + } + + total_b += flash_info[i].size; + } + + return total_b; +} + +static int write_word(flash_info_t * info, ulong dest, ushort data) +{ + volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[0]); + volatile CFG_FLASH_WORD_SIZE *dest2 = (CFG_FLASH_WORD_SIZE *) dest; + volatile CFG_FLASH_WORD_SIZE *data2 = (CFG_FLASH_WORD_SIZE *) &data; + ulong start; + int flag; + + /* Check if Flash is (sufficiently) erased */ + if ((*dest2 & *data2) != *data2) { + return (2); + } + + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts(); + + addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA; + addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055; + addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00A000A0; + *dest2 = *data2; + + /* re-enable interrupts if necessary */ + if (flag) + enable_interrupts(); + + /* data polling for D7 */ + start = get_timer(0); + while ((*dest2 & (CFG_FLASH_WORD_SIZE) 0x00800080) != + (*data2 & (CFG_FLASH_WORD_SIZE) 0x00800080)) { + + if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { + printf("WRITE_TOUT\n"); + return (1); + } + } + return (0); +} + +/*----------------------------------------------------------------------- + * This is taken from the original flash.c for the LPC2292 SODIMM board + * and modified to suit. + */ + +int ext_write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt) +{ + ushort tmp; + ulong i; + uchar* src_org; + uchar* dst_org; + ulong cnt_org = cnt; + int ret = ERR_OK; + + src_org = src; + dst_org = (uchar*)addr; + + if (addr & 1) { /* if odd address */ + tmp = *((uchar*)(addr - 1)); /* little endian */ + tmp |= (*src << 8); + if (write_word(info, addr - 1, tmp)) + return ERR_PROG_ERROR; + addr += 1; + cnt -= 1; + src++; + } + while (cnt > 1) { + tmp = ((*(src+1)) << 8) + (*src); /* little endian */ + if (write_word(info, addr, tmp)) + return ERR_PROG_ERROR; + addr += 2; + src += 2; + cnt -= 2; + } + if (cnt > 0) { + tmp = (*((uchar*)(addr + 1))) << 8; + tmp |= *src; + if (write_word(info, addr, tmp)) + return ERR_PROG_ERROR; + } + + for (i = 0; i < cnt_org; i++) { + if (*dst_org != *src_org) { + printf("Write failed. Byte %lX differs\n", i); + ret = ERR_PROG_ERROR; + break; + } + dst_org++; + src_org++; + } + + return ret; +} diff --git a/board/siemens/SMN42/lowlevel_init.S b/board/siemens/SMN42/lowlevel_init.S new file mode 100644 index 0000000000..11abb63324 --- /dev/null +++ b/board/siemens/SMN42/lowlevel_init.S @@ -0,0 +1,123 @@ +/* + * (C) Copyright 2006 Embedded Artists AB <www.embeddedartists.com> + * + * Slight modifications made to support the SMN42 board from Siemens. + * 2007 Gary Jennejohn garyj@denx.de + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <version.h> +#include <asm/arch/hardware.h> + +/* some parameters for the board */ +/* setting up the CPU-internal memory */ +#define SRAM_START 0x40000000 +#define SRAM_SIZE 0x00004000 +#define BCFG0_VALUE 0x1000ffef +#define BCFG1_VALUE 0x10005D2F +#define BCFG2_VALUE 0x10005D2F +/* + * For P0.18 to set ZZ to the SRAMs to 1. Also set P0.2 (SCL) and P0.3 (SDA) + * for the bit-banger I2C driver correctly. + */ +#define IO0_VALUE 0x4000C + +_TEXT_BASE: + .word TEXT_BASE +MEMMAP_ADR: + .word MEMMAP +BCFG0_ADR: + .word BCFG0 +_BCFG0_VALUE: + .word BCFG0_VALUE +BCFG1_ADR: + .word BCFG1 +_BCFG1_VALUE: + .word BCFG1_VALUE +BCFG2_ADR: + .word BCFG2 +_BCFG2_VALUE: + .word BCFG2_VALUE +IO0DIR_ADR: + .word IO0DIR +_IO0DIR_VALUE: + .word IO0_VALUE +IO0SET_ADR: + .word IO0SET +_IO0SET_VALUE: + .word IO0_VALUE +PINSEL2_ADR: + .word PINSEL2 +PINSEL2_MASK: + .word 0x00000000 +PINSEL2_VALUE: + .word 0x0F804914 + +.extern _start + +.globl lowlevel_init +lowlevel_init: + /* set up memory control register for bank 0 */ + ldr r0, _BCFG0_VALUE + ldr r1, BCFG0_ADR + str r0, [r1] + + /* set up memory control register for bank 1 */ + ldr r0, _BCFG1_VALUE + ldr r1, BCFG1_ADR + str r0, [r1] + + /* set up memory control register for bank 2 */ + ldr r0, _BCFG2_VALUE + ldr r1, BCFG2_ADR + str r0, [r1] + + /* set IO0DIR to make P0.2, P0.3 and P0.18 outputs */ + ldr r0, _IO0DIR_VALUE + ldr r1, IO0DIR_ADR + str r0, [r1] + + /* set P0.18 to 1 */ + ldr r0, _IO0SET_VALUE + ldr r1, IO0SET_ADR + str r0, [r1] + + /* set up PINSEL2 for bus-pins */ + ldr r0, PINSEL2_ADR + ldr r1, [r0] + ldr r2, PINSEL2_MASK + ldr r3, PINSEL2_VALUE + and r1, r1, r2 + orr r1, r1, r3 + str r1, [r0] + + /* move vectors to beginning of SRAM */ + mov r2, #SRAM_START + mov r0, #0 /*_start*/ + ldmneia r0!, {r3-r10} + stmneia r2!, {r3-r10} + ldmneia r0, {r3-r9} + stmneia r2, {r3-r9} + + /* Set-up MEMMAP register, so vectors are taken from SRAM */ + ldr r0, MEMMAP_ADR + mov r1, #0x02 /* vectors re-mapped to static RAM */ + str r1, [r0] + + /* everything is fine now */ + mov pc, lr diff --git a/board/siemens/SMN42/smn42.c b/board/siemens/SMN42/smn42.c new file mode 100644 index 0000000000..cbfc76c463 --- /dev/null +++ b/board/siemens/SMN42/smn42.c @@ -0,0 +1,62 @@ +/* + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger@sysgo.de> + * + * (C) Copyright 2005 Rowel Atienza <rowel@diwalabs.com> + * Armadillo board HT1070 + * + * (C) Copyright 2007 Gary Jennejohn <garyj@denx.de> + * Siemens board SMN42 + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <clps7111.h> + +/* ------------------------------------------------------------------------- */ + + +/* + * Miscellaneous platform dependent initialisations + */ + +int board_init (void) +{ + DECLARE_GLOBAL_DATA_PTR; + + /* arch number MACH_TYPE_ARMADILLO - not official*/ + gd->bd->bi_arch_number = 83; + + /* location of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x00000100; + + return 0; +} + +int dram_init (void) +{ + DECLARE_GLOBAL_DATA_PTR; + + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + + return (0); +} diff --git a/board/siemens/SMN42/u-boot.lds b/board/siemens/SMN42/u-boot.lds new file mode 100644 index 0000000000..64d946c439 --- /dev/null +++ b/board/siemens/SMN42/u-boot.lds @@ -0,0 +1,55 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + cpu/arm720t/start.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} diff --git a/board/stxssa/config.mk b/board/stxssa/config.mk index 30f42c53aa..5f4fc7403e 100644 --- a/board/stxssa/config.mk +++ b/board/stxssa/config.mk @@ -22,13 +22,12 @@ # MA 02111-1307 USA # -# # default CCARBAR is at 0xff700000 # assume U-Boot is less than 0.5MB # U-Boot is less than 256K, so push # it further up into the flash # -TEXT_BASE = 0xfffC0000 +TEXT_BASE = 0xFFFC0000 PLATFORM_CPPFLAGS += -DCONFIG_MPC85xx=1 PLATFORM_CPPFLAGS += -DCONFIG_E500=1 diff --git a/common/cmd_flash.c b/common/cmd_flash.c index cb1c5bb432..a34ab79c3d 100644 --- a/common/cmd_flash.c +++ b/common/cmd_flash.c @@ -690,7 +690,7 @@ U_BOOT_CMD( ); U_BOOT_CMD( - erase, 3, 1, do_flerase, + erase, 3, 0, do_flerase, "erase - erase FLASH memory\n", "start end\n" " - erase FLASH from addr 'start' to addr 'end'\n" @@ -704,7 +704,7 @@ U_BOOT_CMD( ); U_BOOT_CMD( - protect, 4, 1, do_protect, + protect, 4, 0, do_protect, "protect - enable or disable FLASH write protection\n", "on start end\n" " - protect FLASH from addr 'start' to addr 'end'\n" diff --git a/common/cmd_ide.c b/common/cmd_ide.c index ce99a41ab7..e308474af7 100644 --- a/common/cmd_ide.c +++ b/common/cmd_ide.c @@ -514,11 +514,11 @@ void ide_init (void) unsigned char c; int i, bus; #if defined(CONFIG_AMIGAONEG3SE) || defined(CONFIG_SC3) - unsigned int ata_reset_time; + unsigned int ata_reset_time = ATA_RESET_TIME; + char *s; #endif #ifdef CONFIG_AMIGAONEG3SE unsigned int max_bus_scan; - char *s; #endif #ifdef CONFIG_IDE_8xx_PCCARD extern int pcmcia_on (void); diff --git a/common/cmd_misc.c b/common/cmd_misc.c index 67ee9e8a83..a99222d3ef 100644 --- a/common/cmd_misc.c +++ b/common/cmd_misc.c @@ -63,7 +63,7 @@ U_BOOT_CMD( #endif /* CONFIG_COMMANDS & CFG_CMD_IRQ */ U_BOOT_CMD( - sleep , 2, 2, do_sleep, + sleep , 2, 1, do_sleep, "sleep - delay execution for some time\n", "N\n" " - delay execution for N seconds (N is _decimal_ !!!)\n" diff --git a/common/cmd_pcmcia.c b/common/cmd_pcmcia.c index 2eb5b26f2c..b1a594f18b 100644 --- a/common/cmd_pcmcia.c +++ b/common/cmd_pcmcia.c @@ -87,7 +87,7 @@ int do_pinit (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD( - pinit, 2, 1, do_pinit, + pinit, 2, 0, do_pinit, "pinit - PCMCIA sub-system\n", "on - power on PCMCIA socket\n" "pinit off - power off PCMCIA socket\n" diff --git a/common/main.c b/common/main.c index 09ee64b813..553ac357dc 100644 --- a/common/main.c +++ b/common/main.c @@ -1336,7 +1336,7 @@ int run_command (const char *cmd, int flag) /* Did the user stop this? */ if (had_ctrlc ()) - return 0; /* if stopped then not repeatable */ + return -1; /* if stopped then not repeatable */ } return rc ? rc : repeatable; diff --git a/common/soft_i2c.c b/common/soft_i2c.c index edad51bc41..0f6e3a938d 100644 --- a/common/soft_i2c.c +++ b/common/soft_i2c.c @@ -36,6 +36,9 @@ #ifdef CONFIG_IXP425 /* only valid for IXP425 */ #include <asm/arch/ixp425.h> #endif +#ifdef CONFIG_LPC2292 +#include <asm/arch/hardware.h> +#endif #include <i2c.h> #if defined(CONFIG_SOFT_I2C) diff --git a/cpu/arm720t/lpc2292/Makefile b/cpu/arm720t/lpc2292/Makefile new file mode 100644 index 0000000000..240f1e3b3b --- /dev/null +++ b/cpu/arm720t/lpc2292/Makefile @@ -0,0 +1,50 @@ +# +# (C) Copyright 2000-2007 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(SOC).a + +COBJS = flash.o mmc.o mmc_hw.o spi.o +SOBJS = $(obj)iap_entry.o + +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +# this MUST be compiled as thumb code! +$(SOBJS): + $(CC) $(AFLAGS) -march=armv4t -c -o $(SOBJS) iap_entry.S + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/cpu/arm720t/lpc2292/flash.c b/cpu/arm720t/lpc2292/flash.c new file mode 100644 index 0000000000..e5c869722d --- /dev/null +++ b/cpu/arm720t/lpc2292/flash.c @@ -0,0 +1,249 @@ +/* + * (C) Copyright 2006 Embedded Artists AB <www.embeddedartists.com> + * + * Modified to remove all but the IAP-command related code by + * Gary Jennejohn <garyj@denx.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/hardware.h> + +/* IAP commands use 32 bytes at the top of CPU internal sram, we + use 512 bytes below that */ +#define COPY_BUFFER_LOCATION 0x40003de0 + +#define IAP_LOCATION 0x7ffffff1 +#define IAP_CMD_PREPARE 50 +#define IAP_CMD_COPY 51 +#define IAP_CMD_ERASE 52 +#define IAP_CMD_CHECK 53 +#define IAP_CMD_ID 54 +#define IAP_CMD_VERSION 55 +#define IAP_CMD_COMPARE 56 + +#define IAP_RET_CMD_SUCCESS 0 + +static unsigned long command[5]; +static unsigned long result[2]; + +extern void iap_entry(unsigned long * command, unsigned long * result); + +/*----------------------------------------------------------------------- + * + */ +static int get_flash_sector(flash_info_t * info, ulong flash_addr) +{ + int i; + + for(i = 1; i < (info->sector_count); i++) { + if (flash_addr < (info->start[i])) + break; + } + + return (i-1); +} + +/*----------------------------------------------------------------------- + * This function assumes that flash_addr is aligned on 512 bytes boundary + * in flash. This function also assumes that prepare have been called + * for the sector in question. + */ +int lpc2292_copy_buffer_to_flash(flash_info_t * info, ulong flash_addr) +{ + int first_sector; + int last_sector; + + first_sector = get_flash_sector(info, flash_addr); + last_sector = get_flash_sector(info, flash_addr + 512 - 1); + + /* prepare sectors for write */ + command[0] = IAP_CMD_PREPARE; + command[1] = first_sector; + command[2] = last_sector; + iap_entry(command, result); + if (result[0] != IAP_RET_CMD_SUCCESS) { + printf("IAP prepare failed\n"); + return ERR_PROG_ERROR; + } + + command[0] = IAP_CMD_COPY; + command[1] = flash_addr; + command[2] = COPY_BUFFER_LOCATION; + command[3] = 512; + command[4] = CFG_SYS_CLK_FREQ >> 10; + iap_entry(command, result); + if (result[0] != IAP_RET_CMD_SUCCESS) { + printf("IAP copy failed\n"); + return 1; + } + + return 0; +} + +/*----------------------------------------------------------------------- + */ + +int lpc2292_flash_erase (flash_info_t * info, int s_first, int s_last) +{ + int flag; + int prot; + int sect; + + prot = 0; + for (sect = s_first; sect <= s_last; ++sect) { + if (info->protect[sect]) { + prot++; + } + } + if (prot) + return ERR_PROTECTED; + + + flag = disable_interrupts(); + + printf ("Erasing %d sectors starting at sector %2d.\n" + "This make take some time ... ", + s_last - s_first + 1, s_first); + + command[0] = IAP_CMD_PREPARE; + command[1] = s_first; + command[2] = s_last; + iap_entry(command, result); + if (result[0] != IAP_RET_CMD_SUCCESS) { + printf("IAP prepare failed\n"); + return ERR_PROTECTED; + } + + command[0] = IAP_CMD_ERASE; + command[1] = s_first; + command[2] = s_last; + command[3] = CFG_SYS_CLK_FREQ >> 10; + iap_entry(command, result); + if (result[0] != IAP_RET_CMD_SUCCESS) { + printf("IAP erase failed\n"); + return ERR_PROTECTED; + } + + if (flag) + enable_interrupts(); + + return ERR_OK; +} + +int lpc2292_write_buff (flash_info_t * info, uchar * src, ulong addr, + ulong cnt) +{ + int first_copy_size; + int last_copy_size; + int first_block; + int last_block; + int nbr_mid_blocks; + uchar memmap_value; + ulong i; + uchar* src_org; + uchar* dst_org; + int ret = ERR_OK; + + src_org = src; + dst_org = (uchar*)addr; + + first_block = addr / 512; + last_block = (addr + cnt) / 512; + nbr_mid_blocks = last_block - first_block - 1; + + first_copy_size = 512 - (addr % 512); + last_copy_size = (addr + cnt) % 512; + + debug("\ncopy first block: (1) %lX -> %lX 0x200 bytes, " + "(2) %lX -> %lX 0x%X bytes, (3) %lX -> %lX 0x200 bytes\n", + (ulong)(first_block * 512), + (ulong)COPY_BUFFER_LOCATION, + (ulong)src, + (ulong)(COPY_BUFFER_LOCATION + 512 - first_copy_size), + first_copy_size, + (ulong)COPY_BUFFER_LOCATION, + (ulong)(first_block * 512)); + + /* copy first block */ + memcpy((void*)COPY_BUFFER_LOCATION, + (void*)(first_block * 512), 512); + memcpy((void*)(COPY_BUFFER_LOCATION + 512 - first_copy_size), + src, first_copy_size); + lpc2292_copy_buffer_to_flash(info, first_block * 512); + src += first_copy_size; + addr += first_copy_size; + + /* copy middle blocks */ + for (i = 0; i < nbr_mid_blocks; i++) { + debug("copy middle block: %lX -> %lX 512 bytes, " + "%lX -> %lX 512 bytes\n", + (ulong)src, + (ulong)COPY_BUFFER_LOCATION, + (ulong)COPY_BUFFER_LOCATION, + (ulong)addr); + + memcpy((void*)COPY_BUFFER_LOCATION, src, 512); + lpc2292_copy_buffer_to_flash(info, addr); + src += 512; + addr += 512; + } + + + if (last_copy_size > 0) { + debug("copy last block: (1) %lX -> %lX 0x200 bytes, " + "(2) %lX -> %lX 0x%X bytes, (3) %lX -> %lX x200 bytes\n", + (ulong)(last_block * 512), + (ulong)COPY_BUFFER_LOCATION, + (ulong)src, + (ulong)(COPY_BUFFER_LOCATION), + last_copy_size, + (ulong)COPY_BUFFER_LOCATION, + (ulong)addr); + + /* copy last block */ + memcpy((void*)COPY_BUFFER_LOCATION, + (void*)(last_block * 512), 512); + memcpy((void*)COPY_BUFFER_LOCATION, + src, last_copy_size); + lpc2292_copy_buffer_to_flash(info, addr); + } + + /* verify write */ + memmap_value = GET8(MEMMAP); + + disable_interrupts(); + + PUT8(MEMMAP, 01); /* we must make sure that initial 64 + bytes are taken from flash when we + do the compare */ + + for (i = 0; i < cnt; i++) { + if (*dst_org != *src_org){ + printf("Write failed. Byte %lX differs\n", i); + ret = ERR_PROG_ERROR; + break; + } + dst_org++; + src_org++; + } + + PUT8(MEMMAP, memmap_value); + enable_interrupts(); + + return ret; +} diff --git a/board/lpc2292sodimm/iap_entry.S b/cpu/arm720t/lpc2292/iap_entry.S index c31d5190bd..c31d5190bd 100644 --- a/board/lpc2292sodimm/iap_entry.S +++ b/cpu/arm720t/lpc2292/iap_entry.S diff --git a/board/lpc2292sodimm/mmc.c b/cpu/arm720t/lpc2292/mmc.c index 1c0922f240..fd7f149b66 100644 --- a/board/lpc2292sodimm/mmc.c +++ b/cpu/arm720t/lpc2292/mmc.c @@ -23,7 +23,7 @@ #include <part.h> #include <fat.h> #include "mmc_hw.h" -#include "spi.h" +#include <asm/arch/spi.h> #ifdef CONFIG_MMC @@ -44,7 +44,7 @@ block_dev_desc_t * mmc_get_dev(int dev) unsigned long mmc_block_read(int dev, unsigned long start, lbaint_t blkcnt, - unsigned long *buffer) + void *buffer) { unsigned long rc = 0; unsigned char *p = (unsigned char *)buffer; @@ -101,6 +101,9 @@ int mmc_init(int verbose) printf("mmc_init\n"); spi_init(); + /* this meeds to be done twice */ + mmc_hw_init(); + udelay(1000); mmc_hw_init(); mmc_hw_get_parameters(); diff --git a/board/lpc2292sodimm/mmc_hw.c b/cpu/arm720t/lpc2292/mmc_hw.c index 31f2a7988d..b4dc4a6e2f 100644 --- a/board/lpc2292sodimm/mmc_hw.c +++ b/cpu/arm720t/lpc2292/mmc_hw.c @@ -20,7 +20,7 @@ #include <config.h> #include <common.h> #include <asm/arch/hardware.h> -#include "spi.h" +#include <asm/arch/spi.h> #define MMC_Enable() PUT32(IO1CLR, 1l << 22) #define MMC_Disable() PUT32(IO1SET, 1l << 22) diff --git a/board/lpc2292sodimm/mmc_hw.h b/cpu/arm720t/lpc2292/mmc_hw.h index 3687dbf696..3687dbf696 100644 --- a/board/lpc2292sodimm/mmc_hw.h +++ b/cpu/arm720t/lpc2292/mmc_hw.h diff --git a/board/lpc2292sodimm/spi.c b/cpu/arm720t/lpc2292/spi.c index 4ba1468f39..d296bdac68 100644 --- a/board/lpc2292sodimm/spi.c +++ b/cpu/arm720t/lpc2292/spi.c @@ -21,7 +21,7 @@ #include <common.h> #include <asm/errno.h> #include <asm/arch/hardware.h> -#include "spi.h" +#include <asm/arch/spi.h> unsigned long spi_flags; unsigned char spi_idle = 0x00; diff --git a/cpu/mpc86xx/resetvec.S b/cpu/mpc86xx/resetvec.S deleted file mode 100644 index 9a552f6624..0000000000 --- a/cpu/mpc86xx/resetvec.S +++ /dev/null @@ -1,2 +0,0 @@ - .section .resetvec,"ax" - b _start diff --git a/cpu/ppc4xx/405gp_pci.c b/cpu/ppc4xx/405gp_pci.c index 7134355635..8bf03e1b2f 100644 --- a/cpu/ppc4xx/405gp_pci.c +++ b/cpu/ppc4xx/405gp_pci.c @@ -380,7 +380,7 @@ void pci_405gp_setup_vga(struct pci_controller *hose, pci_dev_t dev, pci_hose_write_config_dword(hose, dev, PCI_COMMAND, cmdstat); } -#if !(defined(CONFIG_PIP405) || defined (CONFIG_MIP405)) && !(defined (CONFIG_SOLIDCARD3)) +#if !(defined(CONFIG_PIP405) || defined (CONFIG_MIP405)) && !(defined (CONFIG_SC3)) /* *As is these functs get called out of flash Not a horrible diff --git a/cpu/ppc4xx/44x_spd_ddr.c b/cpu/ppc4xx/44x_spd_ddr.c index 10b4c18978..c500d3f242 100644 --- a/cpu/ppc4xx/44x_spd_ddr.c +++ b/cpu/ppc4xx/44x_spd_ddr.c @@ -20,7 +20,7 @@ * Jun Gu, Artesyn Technology, jung@artesyncp.com * Support for AMCC 440 based on OpenBIOS draminit.c from IBM. * - * (C) Copyright 2005 + * (C) Copyright 2005-2007 * Stefan Roese, DENX Software Engineering, sr@denx.de. * * See file CREDITS for list of people who contributed to this @@ -42,6 +42,11 @@ * MA 02111-1307 USA */ +/* define DEBUG for debugging output (obviously ;-)) */ +#if 0 +#define DEBUG +#endif + #include <common.h> #include <asm/processor.h> #include <i2c.h> @@ -246,25 +251,6 @@ #define MY_TLB_WORD2_I_ENABLE TLB_WORD2_I_ENABLE /* disable caching on SDRAM */ #endif -const unsigned long test[NUMMEMTESTS][NUMMEMWORDS] = { - {0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000, - 0xFFFFFFFF, 0xFFFFFFFF}, - {0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF, - 0x00000000, 0x00000000}, - {0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA, - 0x55555555, 0x55555555}, - {0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555, - 0xAAAAAAAA, 0xAAAAAAAA}, - {0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5, - 0x5A5A5A5A, 0x5A5A5A5A}, - {0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A, - 0xA5A5A5A5, 0xA5A5A5A5}, - {0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55, - 0x55AA55AA, 0x55AA55AA}, - {0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA, - 0xAA55AA55, 0xAA55AA55} -}; - /* bank_parms is used to sort the bank sizes by descending order */ struct bank_param { unsigned long cr; @@ -278,46 +264,37 @@ extern unsigned char cfg_simulate_spd_eeprom[128]; #endif void program_tlb(u32 start, u32 size, u32 tlb_word2_i_value); -unsigned char spd_read(uchar chip, uint addr); - -void get_spd_info(unsigned long* dimm_populated, - unsigned char* iic0_dimm_addr, - unsigned long num_dimm_banks); - -void check_mem_type -(unsigned long* dimm_populated, - unsigned char* iic0_dimm_addr, - unsigned long num_dimm_banks); - -void check_volt_type -(unsigned long* dimm_populated, - unsigned char* iic0_dimm_addr, - unsigned long num_dimm_banks); - -void program_cfg0(unsigned long* dimm_populated, - unsigned char* iic0_dimm_addr, - unsigned long num_dimm_banks); - -void program_cfg1(unsigned long* dimm_populated, - unsigned char* iic0_dimm_addr, - unsigned long num_dimm_banks); - -void program_rtr (unsigned long* dimm_populated, - unsigned char* iic0_dimm_addr, - unsigned long num_dimm_banks); - -void program_tr0 (unsigned long* dimm_populated, - unsigned char* iic0_dimm_addr, - unsigned long num_dimm_banks); - -void program_tr1 (void); - -void program_ecc (unsigned long num_bytes); +static unsigned char spd_read(uchar chip, uint addr); +static void get_spd_info(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks); +static void check_mem_type(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks); +static void check_volt_type(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks); +static void program_cfg0(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks); +static void program_cfg1(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks); +static void program_rtr(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks); +static void program_tr0(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks); +static void program_tr1(void); + +#ifdef CONFIG_DDR_ECC +static void program_ecc(unsigned long num_bytes); +#endif -unsigned -long program_bxcr(unsigned long* dimm_populated, - unsigned char* iic0_dimm_addr, - unsigned long num_dimm_banks); +static unsigned long program_bxcr(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks); /* * This function is reading data from the DIMM module EEPROM over the SPD bus @@ -328,7 +305,6 @@ long program_bxcr(unsigned long* dimm_populated, * BUG: Don't handle ECC memory * BUG: A few values in the TR register is currently hardcoded */ - long int spd_sdram(void) { unsigned char iic0_dimm_addr[] = SPD_EEPROM_ADDRESS; unsigned long dimm_populated[sizeof(iic0_dimm_addr)]; @@ -421,9 +397,8 @@ long int spd_sdram(void) { */ while (1) { mfsdram(mem_mcsts, mcsts); - if ((mcsts & SDRAM_MCSTS_MRSC) != 0) { + if ((mcsts & SDRAM_MCSTS_MRSC) != 0) break; - } } /* @@ -431,14 +406,17 @@ long int spd_sdram(void) { */ program_tr1(); +#ifdef CONFIG_DDR_ECC /* - * if ECC is enabled, initialize parity bits + * If ecc is enabled, initialize the parity bits. */ + program_ecc(total_size); +#endif return total_size; } -unsigned char spd_read(uchar chip, uint addr) +static unsigned char spd_read(uchar chip, uint addr) { unsigned char data[2]; @@ -460,9 +438,9 @@ unsigned char spd_read(uchar chip, uint addr) return 0; } -void get_spd_info(unsigned long* dimm_populated, - unsigned char* iic0_dimm_addr, - unsigned long num_dimm_banks) +static void get_spd_info(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks) { unsigned long dimm_num; unsigned long dimm_found; @@ -480,14 +458,10 @@ void get_spd_info(unsigned long* dimm_populated, if ((num_of_bytes != 0) && (total_size != 0)) { dimm_populated[dimm_num] = TRUE; dimm_found = TRUE; -#if 0 - printf("DIMM slot %lu: populated\n", dimm_num); -#endif + debug("DIMM slot %lu: populated\n", dimm_num); } else { dimm_populated[dimm_num] = FALSE; -#if 0 - printf("DIMM slot %lu: Not populated\n", dimm_num); -#endif + debug("DIMM slot %lu: Not populated\n", dimm_num); } } @@ -497,9 +471,9 @@ void get_spd_info(unsigned long* dimm_populated, } } -void check_mem_type(unsigned long* dimm_populated, - unsigned char* iic0_dimm_addr, - unsigned long num_dimm_banks) +static void check_mem_type(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks) { unsigned long dimm_num; unsigned char dimm_type; @@ -509,9 +483,7 @@ void check_mem_type(unsigned long* dimm_populated, dimm_type = spd_read(iic0_dimm_addr[dimm_num], 2); switch (dimm_type) { case 7: -#if 0 - printf("DIMM slot %lu: DDR SDRAM detected\n", dimm_num); -#endif + debug("DIMM slot %lu: DDR SDRAM detected\n", dimm_num); break; default: printf("ERROR: Unsupported DIMM detected in slot %lu.\n", @@ -525,10 +497,9 @@ void check_mem_type(unsigned long* dimm_populated, } } - -void check_volt_type(unsigned long* dimm_populated, - unsigned char* iic0_dimm_addr, - unsigned long num_dimm_banks) +static void check_volt_type(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks) { unsigned long dimm_num; unsigned long voltage_type; @@ -541,18 +512,16 @@ void check_volt_type(unsigned long* dimm_populated, dimm_num); hang(); } else { -#if 0 - printf("DIMM %lu voltage level supported.\n", dimm_num); -#endif + debug("DIMM %lu voltage level supported.\n", dimm_num); } break; } } } -void program_cfg0(unsigned long* dimm_populated, - unsigned char* iic0_dimm_addr, - unsigned long num_dimm_banks) +static void program_cfg0(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks) { unsigned long dimm_num; unsigned long cfg0; @@ -640,9 +609,9 @@ void program_cfg0(unsigned long* dimm_populated, mtsdram(mem_cfg0, cfg0); } -void program_cfg1(unsigned long* dimm_populated, - unsigned char* iic0_dimm_addr, - unsigned long num_dimm_banks) +static void program_cfg1(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks) { unsigned long cfg1; mfsdram(mem_cfg1, cfg1); @@ -658,9 +627,9 @@ void program_cfg1(unsigned long* dimm_populated, mtsdram(mem_cfg1, cfg1); } -void program_rtr (unsigned long* dimm_populated, - unsigned char* iic0_dimm_addr, - unsigned long num_dimm_banks) +static void program_rtr(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks) { unsigned long dimm_num; unsigned long bus_period_x_10; @@ -676,7 +645,6 @@ void program_rtr (unsigned long* dimm_populated, get_sys_info(&sys_info); bus_period_x_10 = ONE_BILLION / (sys_info.freqPLB / 10); - for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) { if (dimm_populated[dimm_num] == TRUE) { refresh_rate_type = 0x7F & spd_read(iic0_dimm_addr[dimm_num], 12); @@ -719,9 +687,9 @@ void program_rtr (unsigned long* dimm_populated, mtsdram(mem_rtr, sdram_rtr); } -void program_tr0 (unsigned long* dimm_populated, - unsigned char* iic0_dimm_addr, - unsigned long num_dimm_banks) +static void program_tr0(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks) { unsigned long dimm_num; unsigned long tr0; @@ -1001,13 +969,73 @@ void program_tr0 (unsigned long* dimm_populated, break; } -#if 0 - printf("tr0: %x\n", tr0); -#endif + debug("tr0: %x\n", tr0); mtsdram(mem_tr0, tr0); } -void program_tr1 (void) +static int short_mem_test(void) +{ + unsigned long i, j; + unsigned long bxcr_num; + unsigned long *membase; + const unsigned long test[NUMMEMTESTS][NUMMEMWORDS] = { + {0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF, + 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF}, + {0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000, + 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000}, + {0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555, + 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555}, + {0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA, + 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA}, + {0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A, + 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A}, + {0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5, + 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5}, + {0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA, + 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA}, + {0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55, + 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55}}; + + for (bxcr_num = 0; bxcr_num < MAXBXCR; bxcr_num++) { + mtdcr(memcfga, mem_b0cr + (bxcr_num << 2)); + if ((mfdcr(memcfgd) & SDRAM_BXCR_SDBE) == SDRAM_BXCR_SDBE) { + /* Bank is enabled */ + membase = (unsigned long*) + (mfdcr(memcfgd) & SDRAM_BXCR_SDBA_MASK); + + /* + * Run the short memory test + */ + for (i = 0; i < NUMMEMTESTS; i++) { + for (j = 0; j < NUMMEMWORDS; j++) { + membase[j] = test[i][j]; + ppcDcbf((unsigned long)&(membase[j])); + } + + for (j = 0; j < NUMMEMWORDS; j++) { + if (membase[j] != test[i][j]) { + ppcDcbf((unsigned long)&(membase[j])); + return 0; + } + ppcDcbf((unsigned long)&(membase[j])); + } + + if (j < NUMMEMWORDS) + return 0; + } + + /* + * see if the rdclt value passed + */ + if (i < NUMMEMTESTS) + return 0; + } + } + + return 1; +} + +static void program_tr1(void) { unsigned long tr0; unsigned long tr1; @@ -1015,8 +1043,7 @@ void program_tr1 (void) unsigned long ecc_temp; unsigned long dlycal; unsigned long dly_val; - unsigned long i, j, k; - unsigned long bxcr_num; + unsigned long k; unsigned long max_pass_length; unsigned long current_pass_length; unsigned long current_fail_length; @@ -1029,7 +1056,6 @@ void program_tr1 (void) unsigned char window_found; unsigned char fail_found; unsigned char pass_found; - unsigned long * membase; PPC440_SYS_INFO sys_info; /* @@ -1079,55 +1105,16 @@ void program_tr1 (void) window_found = FALSE; fail_found = FALSE; pass_found = FALSE; -#ifdef DEBUG - printf("Starting memory test "); -#endif + debug("Starting memory test "); + for (k = 0; k < NUMHALFCYCLES; k++) { - for (rdclt = 0; rdclt < dly_val; rdclt++) { + for (rdclt = 0; rdclt < dly_val; rdclt++) { /* * Set the timing reg for the test. */ mtsdram(mem_tr1, (tr1 | SDRAM_TR1_RDCT_ENCODE(rdclt))); - for (bxcr_num = 0; bxcr_num < MAXBXCR; bxcr_num++) { - mtdcr(memcfga, mem_b0cr + (bxcr_num<<2)); - if ((mfdcr(memcfgd) & SDRAM_BXCR_SDBE) == SDRAM_BXCR_SDBE) { - /* Bank is enabled */ - membase = (unsigned long*) - (mfdcr(memcfgd) & SDRAM_BXCR_SDBA_MASK); - - /* - * Run the short memory test - */ - for (i = 0; i < NUMMEMTESTS; i++) { - for (j = 0; j < NUMMEMWORDS; j++) { - membase[j] = test[i][j]; - ppcDcbf((unsigned long)&(membase[j])); - } - - for (j = 0; j < NUMMEMWORDS; j++) { - if (membase[j] != test[i][j]) { - ppcDcbf((unsigned long)&(membase[j])); - break; - } - ppcDcbf((unsigned long)&(membase[j])); - } - - if (j < NUMMEMWORDS) { - break; - } - } - - /* - * see if the rdclt value passed - */ - if (i < NUMMEMTESTS) { - break; - } - } - } - - if (bxcr_num == MAXBXCR) { + if (short_mem_test()) { if (fail_found == TRUE) { pass_found = TRUE; if (current_pass_length == 0) { @@ -1157,9 +1144,8 @@ void program_tr1 (void) } } } -#ifdef DEBUG - printf("."); -#endif + debug("."); + if (window_found == TRUE) { break; } @@ -1167,9 +1153,7 @@ void program_tr1 (void) tr1 = tr1 ^ SDRAM_TR1_RDCD_MASK; rdclt_offset += dly_val; } -#ifdef DEBUG - printf("\n"); -#endif + debug("\n"); /* * make sure we find the window @@ -1218,18 +1202,17 @@ void program_tr1 (void) } tr1 |= SDRAM_TR1_RDCT_ENCODE(rdclt_average); -#if 0 - printf("tr1: %x\n", tr1); -#endif + debug("tr1: %x\n", tr1); + /* * program SDRAM Timing Register 1 TR1 */ mtsdram(mem_tr1, tr1); } -unsigned long program_bxcr(unsigned long* dimm_populated, - unsigned char* iic0_dimm_addr, - unsigned long num_dimm_banks) +static unsigned long program_bxcr(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks) { unsigned long dimm_num; unsigned long bank_base_addr; @@ -1262,8 +1245,8 @@ unsigned long program_bxcr(unsigned long* dimm_populated, #ifdef CONFIG_BAMBOO /* * This next section is hardware dependent and must be programmed - * to match the hardware. For bammboo, the following holds... - * 1. SDRAM0_B0CR: Bank 0 of dimm 0 ctrl_bank_num : 0 + * to match the hardware. For bamboo, the following holds... + * 1. SDRAM0_B0CR: Bank 0 of dimm 0 ctrl_bank_num : 0 (soldered onboard) * 2. SDRAM0_B1CR: Bank 0 of dimm 1 ctrl_bank_num : 1 * 3. SDRAM0_B2CR: Bank 1 of dimm 1 ctrl_bank_num : 1 * 4. SDRAM0_B3CR: Bank 0 of dimm 2 ctrl_bank_num : 3 @@ -1273,10 +1256,12 @@ unsigned long program_bxcr(unsigned long* dimm_populated, ctrl_bank_num[1] = 1; ctrl_bank_num[2] = 3; #else + /* + * Ocotea, Ebony and the other IBM/AMCC eval boards have + * 2 DIMM slots with each max 2 banks + */ ctrl_bank_num[0] = 0; - ctrl_bank_num[1] = 1; - ctrl_bank_num[2] = 2; - ctrl_bank_num[3] = 3; + ctrl_bank_num[1] = 2; #endif /* @@ -1290,6 +1275,8 @@ unsigned long program_bxcr(unsigned long* dimm_populated, num_col_addr = spd_read(iic0_dimm_addr[dimm_num], 4); num_banks = spd_read(iic0_dimm_addr[dimm_num], 5); bank_size_id = spd_read(iic0_dimm_addr[dimm_num], 31); + debug("DIMM%d: row=%d col=%d banks=%d\n", dimm_num, + num_row_addr, num_col_addr, num_banks); /* * Set the SDRAM0_BxCR regs @@ -1354,9 +1341,12 @@ unsigned long program_bxcr(unsigned long* dimm_populated, cr |= SDRAM_BXCR_SDBE; for (i = 0; i < num_banks; i++) { - bank_parms[ctrl_bank_num[dimm_num]+i+dimm_num].bank_size_bytes = - (4 * 1024 * 1024) * bank_size_id; - bank_parms[ctrl_bank_num[dimm_num]+i+dimm_num].cr = cr; + bank_parms[ctrl_bank_num[dimm_num]+i].bank_size_bytes = + (4 << 20) * bank_size_id; + bank_parms[ctrl_bank_num[dimm_num]+i].cr = cr; + debug("DIMM%d-bank %d (SDRAM0_B%dCR): bank_size_bytes=%d\n", + dimm_num, i, ctrl_bank_num[dimm_num]+i, + bank_parms[ctrl_bank_num[dimm_num]+i].bank_size_bytes); } } } @@ -1400,13 +1390,15 @@ unsigned long program_bxcr(unsigned long* dimm_populated, bank_parms[sorted_bank_num[bx_cr_num]].cr; mtdcr(memcfgd, temp); bank_base_addr += bank_parms[sorted_bank_num[bx_cr_num]].bank_size_bytes; + debug("SDRAM0_B%dCR=0x%08lx\n", sorted_bank_num[bx_cr_num], temp); } } return(bank_base_addr); } -void program_ecc (unsigned long num_bytes) +#ifdef CONFIG_DDR_ECC +static void program_ecc(unsigned long num_bytes) { unsigned long bank_base_addr; unsigned long current_address; @@ -1425,14 +1417,12 @@ void program_ecc (unsigned long num_bytes) bank_base_addr = CFG_SDRAM_BASE; if ((cfg0 & SDRAM_CFG0_MCHK_MASK) != SDRAM_CFG0_MCHK_NON) { - mtsdram(mem_cfg0, (cfg0 & ~SDRAM_CFG0_MCHK_MASK) | - SDRAM_CFG0_MCHK_GEN); + mtsdram(mem_cfg0, (cfg0 & ~SDRAM_CFG0_MCHK_MASK) | SDRAM_CFG0_MCHK_GEN); - if ((cfg0 & SDRAM_CFG0_DMWD_MASK) == SDRAM_CFG0_DMWD_32) { + if ((cfg0 & SDRAM_CFG0_DMWD_MASK) == SDRAM_CFG0_DMWD_32) address_increment = 4; - } else { + else address_increment = 8; - } current_address = (unsigned long)(bank_base_addr); end_address = (unsigned long)(bank_base_addr) + num_bytes; @@ -1446,4 +1436,5 @@ void program_ecc (unsigned long num_bytes) SDRAM_CFG0_MCHK_CHK); } } +#endif /* CONFIG_DDR_ECC */ #endif /* CONFIG_SPD_EEPROM */ diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c index 2ecd3e4b61..48b9ee2f7e 100644 --- a/cpu/ppc4xx/44x_spd_ddr2.c +++ b/cpu/ppc4xx/44x_spd_ddr2.c @@ -465,7 +465,11 @@ long int initdram(int board_type) * Set the SDRAM Clock Timing Register *-----------------------------------------------------------------*/ mfsdram(SDRAM_CLKTR, val); +#ifdef CFG_44x_DDR2_CKTR_180 + mtsdram(SDRAM_CLKTR, (val & ~SDRAM_CLKTR_CLKP_MASK) | SDRAM_CLKTR_CLKP_180_DEG_ADV); +#else mtsdram(SDRAM_CLKTR, (val & ~SDRAM_CLKTR_CLKP_MASK) | SDRAM_CLKTR_CLKP_0_DEG); +#endif /*------------------------------------------------------------------ * Program the BxCF registers. @@ -1117,7 +1121,8 @@ static void program_codt(unsigned long *dimm_populated, modt3 = 0x00000000; } if (total_rank == 4) { - codt |= CALC_ODT_R(0) | CALC_ODT_R(1) | CALC_ODT_R(2) | CALC_ODT_R(3); + codt |= CALC_ODT_R(0) | CALC_ODT_R(1) | + CALC_ODT_R(2) | CALC_ODT_R(3); modt0 = CALC_ODT_RW(2); modt1 = 0x00000000; modt2 = CALC_ODT_RW(0); diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c index 8e6bc84db0..c07bc0c325 100644 --- a/cpu/ppc4xx/cpu.c +++ b/cpu/ppc4xx/cpu.c @@ -139,6 +139,7 @@ static char *bootstrap_str[] = { "Reserved", "I2C (Addr 0x50)", }; +static char bootstrap_char[] = { 'A', 'B', 'C', 'B', 'D', 'E', 'x', 'F' }; #endif #if defined(CONFIG_440SP) || defined(CONFIG_440SPE) @@ -149,6 +150,7 @@ static char *bootstrap_str[] = { "I2C (Addr 0x54)", "I2C (Addr 0x50)", }; +static char bootstrap_char[] = { 'A', 'B', 'C', 'D'}; #endif #if defined(CONFIG_440EP) || defined(CONFIG_440GR) @@ -163,6 +165,7 @@ static char *bootstrap_str[] = { "PCI", "I2C (Addr 0x52)", }; +static char bootstrap_char[] = { 'A', 'B', 'C', 'D', 'E', 'G', 'F', 'H' }; #endif #if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) @@ -177,6 +180,7 @@ static char *bootstrap_str[] = { "PCI", "I2C (Addr 0x52)", }; +static char bootstrap_char[] = { 'A', 'B', 'C', 'D', 'E', 'G', 'F', 'H' }; #endif #if defined(CONFIG_405EZ) @@ -199,6 +203,8 @@ static char *bootstrap_str[] = { "SPI (slow)", "I2C (Addr 0x50)", }; +static char bootstrap_char[] = { 'A', 'B', 'C', 'D', 'E', 'F', 'G', 'H', \ + 'I', 'x', 'K', 'L', 'M', 'N', 'O', 'P' }; #endif #if defined(SDR0_PINSTP_SHIFT) @@ -427,7 +433,7 @@ int checkcpu (void) printf (" I2C boot EEPROM %sabled\n", i2c_bootrom_enabled() ? "en" : "dis"); #endif /* I2C_BOOTROM */ #if defined(SDR0_PINSTP_SHIFT) - printf (" Bootstrap Option %c - ", (char)bootstrap_option() + 'A'); + printf (" Bootstrap Option %c - ", bootstrap_char[bootstrap_option()]); printf ("Boot ROM Location %s\n", bootstrap_str[bootstrap_option()]); #endif /* SDR0_PINSTP_SHIFT */ diff --git a/cpu/ppc4xx/ndfc.c b/cpu/ppc4xx/ndfc.c index 08dfc32952..f63fc79f6c 100644 --- a/cpu/ppc4xx/ndfc.c +++ b/cpu/ppc4xx/ndfc.c @@ -3,7 +3,7 @@ * Platform independend driver for NDFC (NanD Flash Controller) * integrated into EP440 cores * - * (C) Copyright 2006 + * (C) Copyright 2006-2007 * Stefan Roese, DENX Software Engineering, sr@denx.de. * * Based on original work by @@ -38,7 +38,9 @@ #include <nand.h> #include <linux/mtd/ndfc.h> +#include <linux/mtd/nand_ecc.h> #include <asm/processor.h> +#include <asm/io.h> #include <ppc4xx.h> static u8 hwctl = 0; @@ -70,11 +72,11 @@ static void ndfc_write_byte(struct mtd_info *mtdinfo, u_char byte) ulong base = (ulong) this->IO_ADDR_W & 0xfffffffc; if (hwctl & 0x1) - out8(base + NDFC_CMD, byte); + out_8((u8 *)(base + NDFC_CMD), byte); else if (hwctl & 0x2) - out8(base + NDFC_ALE, byte); + out_8((u8 *)(base + NDFC_ALE), byte); else - out8(base + NDFC_DATA, byte); + out_8((u8 *)(base + NDFC_DATA), byte); } static u_char ndfc_read_byte(struct mtd_info *mtdinfo) @@ -82,7 +84,7 @@ static u_char ndfc_read_byte(struct mtd_info *mtdinfo) struct nand_chip *this = mtdinfo->priv; ulong base = (ulong) this->IO_ADDR_W & 0xfffffffc; - return (in8(base + NDFC_DATA)); + return (in_8((u8 *)(base + NDFC_DATA))); } static int ndfc_dev_ready(struct mtd_info *mtdinfo) @@ -90,17 +92,41 @@ static int ndfc_dev_ready(struct mtd_info *mtdinfo) struct nand_chip *this = mtdinfo->priv; ulong base = (ulong) this->IO_ADDR_W & 0xfffffffc; - while (!(in32(base + NDFC_STAT) & NDFC_STAT_IS_READY)) + while (!(in_be32((u32 *)(base + NDFC_STAT)) & NDFC_STAT_IS_READY)) ; return 1; } -#ifndef CONFIG_NAND_SPL -/* - * Don't use these speedup functions in NAND boot image, since the image - * has to fit into 4kByte. - */ +static void ndfc_enable_hwecc(struct mtd_info *mtdinfo, int mode) +{ + struct nand_chip *this = mtdinfo->priv; + ulong base = (ulong) this->IO_ADDR_W & 0xfffffffc; + u32 ccr; + + ccr = in_be32((u32 *)(base + NDFC_CCR)); + ccr |= NDFC_CCR_RESET_ECC; + out_be32((u32 *)(base + NDFC_CCR), ccr); +} + +static int ndfc_calculate_ecc(struct mtd_info *mtdinfo, + const u_char *dat, u_char *ecc_code) +{ + struct nand_chip *this = mtdinfo->priv; + ulong base = (ulong) this->IO_ADDR_W & 0xfffffffc; + u32 ecc; + u8 *p = (u8 *)&ecc; + + ecc = in_be32((u32 *)(base + NDFC_ECC)); + + /* The NDFC uses Smart Media (SMC) bytes order + */ + ecc_code[0] = p[2]; + ecc_code[1] = p[1]; + ecc_code[2] = p[3]; + + return 0; +} /* * Speedups for buffer read/write/verify @@ -116,9 +142,14 @@ static void ndfc_read_buf(struct mtd_info *mtdinfo, uint8_t *buf, int len) uint32_t *p = (uint32_t *) buf; for (;len > 0; len -= 4) - *p++ = in32(base + NDFC_DATA); + *p++ = in_be32((u32 *)(base + NDFC_DATA)); } +#ifndef CONFIG_NAND_SPL +/* + * Don't use these speedup functions in NAND boot image, since the image + * has to fit into 4kByte. + */ static void ndfc_write_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len) { struct nand_chip *this = mtdinfo->priv; @@ -126,7 +157,7 @@ static void ndfc_write_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len uint32_t *p = (uint32_t *) buf; for (; len > 0; len -= 4) - out32(base + NDFC_DATA, *p++); + out_be32((u32 *)(base + NDFC_DATA), *p++); } static int ndfc_verify_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len) @@ -136,7 +167,7 @@ static int ndfc_verify_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len uint32_t *p = (uint32_t *) buf; for (; len > 0; len -= 4) - if (*p++ != in32(base + NDFC_DATA)) + if (*p++ != in_be32((u32 *)(base + NDFC_DATA))) return -1; return 0; @@ -153,8 +184,8 @@ void board_nand_select_device(struct nand_chip *nand, int chip) ulong base = (ulong)nand->IO_ADDR_W & 0xfffffffc; /* Set NandFlash Core Configuration Register */ - /* 1col x 2 rows */ - out32(base + NDFC_CCR, 0x00000000 | (cs << 24)); + /* 1 col x 2 rows */ + out_be32((u32 *)(base + NDFC_CCR), 0x00000000 | (cs << 24)); } int board_nand_init(struct nand_chip *nand) @@ -162,16 +193,19 @@ int board_nand_init(struct nand_chip *nand) int cs = (ulong)nand->IO_ADDR_W & 0x00000003; ulong base = (ulong)nand->IO_ADDR_W & 0xfffffffc; - nand->eccmode = NAND_ECC_SOFT; - nand->hwcontrol = ndfc_hwcontrol; nand->read_byte = ndfc_read_byte; + nand->read_buf = ndfc_read_buf; nand->write_byte = ndfc_write_byte; nand->dev_ready = ndfc_dev_ready; + nand->eccmode = NAND_ECC_HW3_256; + nand->enable_hwecc = ndfc_enable_hwecc; + nand->calculate_ecc = ndfc_calculate_ecc; + nand->correct_data = nand_correct_data; + #ifndef CONFIG_NAND_SPL nand->write_buf = ndfc_write_buf; - nand->read_buf = ndfc_read_buf; nand->verify_buf = ndfc_verify_buf; #else /* @@ -187,7 +221,7 @@ int board_nand_init(struct nand_chip *nand) * Select required NAND chip in NDFC */ board_nand_select_device(nand, cs); - out32(base + NDFC_BCFG0 + (cs << 2), 0x80002222); + out_be32((u32 *)(base + NDFC_BCFG0 + (cs << 2)), 0x80002222); return 0; } diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S index 85660b40dc..78d0042cc7 100644 --- a/cpu/ppc4xx/start.S +++ b/cpu/ppc4xx/start.S @@ -110,6 +110,13 @@ # endif #endif /* CFG_INIT_DCACHE_CS */ +#define function_prolog(func_name) .text; \ + .align 2; \ + .globl func_name; \ + func_name: +#define function_epilog(func_name) .type func_name,@function; \ + .size func_name,.-func_name + /* We don't want the MMU yet. */ #undef MSR_KERNEL @@ -148,7 +155,9 @@ * NAND U-Boot image is started from offset 0 */ .text +#if defined(CONFIG_440) bl reconfig_tlb0 +#endif GET_GOT bl cpu_init_f /* run low-level CPU init code (from Flash) */ bl board_init_f @@ -388,8 +397,9 @@ rsttlb: tlbwe r0,r1,0x0000 /* Invalidate all entries (V=0)*/ 2: #if defined(CONFIG_NAND_SPL) +#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) /* - * Enable internal SRAM + * Enable internal SRAM (only on 440EPx/GRx, 440EP/GR have no OCM) */ lis r2,0x7fff ori r2,r2,0xffff @@ -399,6 +409,45 @@ rsttlb: tlbwe r0,r1,0x0000 /* Invalidate all entries (V=0)*/ mfdcr r1,isram0_pmeg and r1,r1,r2 /* Disable pwr mgmt */ mtdcr isram0_pmeg,r1 +#endif +#if defined(CONFIG_440EP) + /* + * On 440EP with no internal SRAM, we setup SDRAM very early + * and copy the NAND_SPL to SDRAM and jump to it + */ + /* Clear Dcache to use as RAM */ + addis r3,r0,CFG_INIT_RAM_ADDR@h + ori r3,r3,CFG_INIT_RAM_ADDR@l + addis r4,r0,CFG_INIT_RAM_END@h + ori r4,r4,CFG_INIT_RAM_END@l + rlwinm. r5,r4,0,27,31 + rlwinm r5,r4,27,5,31 + beq ..d_ran3 + addi r5,r5,0x0001 +..d_ran3: + mtctr r5 +..d_ag3: + dcbz r0,r3 + addi r3,r3,32 + bdnz ..d_ag3 + /*----------------------------------------------------------------*/ + /* Setup the stack in internal SRAM */ + /*----------------------------------------------------------------*/ + lis r1,CFG_INIT_RAM_ADDR@h + ori r1,r1,CFG_INIT_SP_OFFSET@l + li r0,0 + stwu r0,-4(r1) + stwu r0,-4(r1) /* Terminate call chain */ + + stwu r1,-8(r1) /* Save back chain and move SP */ + lis r0,RESET_VECTOR@h /* Address of reset vector */ + ori r0,r0, RESET_VECTOR@l + stwu r1,-8(r1) /* Save back chain and move SP */ + stw r0,+12(r1) /* Save return addr (underflow vect) */ + sync + bl early_sdram_init + sync +#endif /* CONFIG_440EP */ /* * Copy SPL from cache into internal SRAM @@ -429,7 +478,7 @@ spl_loop: start_ram: sync isync -#endif +#endif /* CONFIG_NAND_SPL */ bl 3f b _start @@ -810,6 +859,38 @@ _start: #endif /* CONFIG_405EZ */ #endif +#ifdef CONFIG_NAND_SPL + /* + * Copy SPL from cache into internal SRAM + */ + li r4,(CFG_NAND_BOOT_SPL_SIZE >> 2) - 1 + mtctr r4 + lis r2,CFG_NAND_BOOT_SPL_SRC@h + ori r2,r2,CFG_NAND_BOOT_SPL_SRC@l + lis r3,CFG_NAND_BOOT_SPL_DST@h + ori r3,r3,CFG_NAND_BOOT_SPL_DST@l +spl_loop: + lwzu r4,4(r2) + stwu r4,4(r3) + bdnz spl_loop + + /* + * Jump to code in RAM + */ + bl 00f +00: mflr r10 + lis r3,(CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST)@h + ori r3,r3,(CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST)@l + sub r10,r10,r3 + addi r10,r10,28 + mtlr r10 + blr + +start_ram: + sync + isync +#endif /* CONFIG_NAND_SPL */ + /*----------------------------------------------------------------------- */ /* Setup temporary stack in DCACHE or OCM if needed for SDRAM SPD. */ /*----------------------------------------------------------------------- */ @@ -920,12 +1001,16 @@ _start: stw r0, +12(r1) /* Save return addr (underflow vect) */ #endif /* !(CFG_INIT_DCACHE_CS || !CFG_TEM_STACK_OCM) */ +#ifdef CONFIG_NAND_SPL + bl nand_boot /* will not return */ +#else GET_GOT /* initialize GOT access */ bl cpu_init_f /* run low-level CPU init code (from Flash) */ /* NEVER RETURNS! */ bl board_init_f /* run first part of init code (from Flash) */ +#endif /* CONFIG_NAND_SPL */ #endif /* CONFIG_405GP || CONFIG_405CR || CONFIG_405 || CONFIG_405EP */ /*----------------------------------------------------------------------- */ @@ -1137,27 +1222,9 @@ crit_return: lwz r1,GPR1(r1) SYNC rfci -#endif /* CONFIG_NAND_SPL */ /* Cache functions. */ -invalidate_icache: - iccci r0,r0 /* for 405, iccci invalidates the */ - blr /* entire I cache */ - -invalidate_dcache: - addi r6,0,0x0000 /* clear GPR 6 */ - /* Do loop for # of dcache congruence classes. */ - lis r7, (CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)@ha /* TBS for large sized cache */ - ori r7, r7, (CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)@l - /* NOTE: dccci invalidates both */ - mtctr r7 /* ways in the D cache */ -..dcloop: - dccci 0,r6 /* invalidate line */ - addi r6,r6, CFG_CACHELINE_SIZE /* bump to next line */ - bdnz ..dcloop - blr - flush_dcache: addis r9,r0,0x0002 /* set mask for EE and CE msr bits */ ori r9,r9,0x8000 @@ -1255,24 +1322,6 @@ wr_tcr: blr /*------------------------------------------------------------------------------- */ -/* Function: in8 */ -/* Description: Input 8 bits */ -/*------------------------------------------------------------------------------- */ - .globl in8 -in8: - lbz r3,0x0000(r3) - blr - -/*------------------------------------------------------------------------------- */ -/* Function: out8 */ -/* Description: Output 8 bits */ -/*------------------------------------------------------------------------------- */ - .globl out8 -out8: - stb r4,0x0000(r3) - blr - -/*------------------------------------------------------------------------------- */ /* Function: out16 */ /* Description: Output 16 bits */ /*------------------------------------------------------------------------------- */ @@ -1291,15 +1340,6 @@ out16r: blr /*------------------------------------------------------------------------------- */ -/* Function: out32 */ -/* Description: Output 32 bits */ -/*------------------------------------------------------------------------------- */ - .globl out32 -out32: - stw r4,0x0000(r3) - blr - -/*------------------------------------------------------------------------------- */ /* Function: out32r */ /* Description: Byte reverse and output 32 bits */ /*------------------------------------------------------------------------------- */ @@ -1327,15 +1367,6 @@ in16r: blr /*------------------------------------------------------------------------------- */ -/* Function: in32 */ -/* Description: Input 32 bits */ -/*------------------------------------------------------------------------------- */ - .globl in32 -in32: - lwz 3,0x0000(3) - blr - -/*------------------------------------------------------------------------------- */ /* Function: in32r */ /* Description: Input 32 bits and byte reverse */ /*------------------------------------------------------------------------------- */ @@ -1377,9 +1408,6 @@ ppcSync: sync blr -/*------------------------------------------------------------------------------*/ - -#ifndef CONFIG_NAND_SPL /* * void relocate_code (addr_sp, gd, addr_moni) * @@ -1644,8 +1672,105 @@ trap_reloc: stw r0, 4(r7) blr + +#if defined(CONFIG_440) +/*----------------------------------------------------------------------------+ +| dcbz_area. ++----------------------------------------------------------------------------*/ + function_prolog(dcbz_area) + rlwinm. r5,r4,0,27,31 + rlwinm r5,r4,27,5,31 + beq ..d_ra2 + addi r5,r5,0x0001 +..d_ra2:mtctr r5 +..d_ag2:dcbz r0,r3 + addi r3,r3,32 + bdnz ..d_ag2 + sync + blr + function_epilog(dcbz_area) + +/*----------------------------------------------------------------------------+ +| dflush. Assume 32K at vector address is cachable. ++----------------------------------------------------------------------------*/ + function_prolog(dflush) + mfmsr r9 + rlwinm r8,r9,0,15,13 + rlwinm r8,r8,0,17,15 + mtmsr r8 + addi r3,r0,0x0000 + mtspr dvlim,r3 + mfspr r3,ivpr + addi r4,r0,1024 + mtctr r4 +..dflush_loop: + lwz r6,0x0(r3) + addi r3,r3,32 + bdnz ..dflush_loop + addi r3,r3,-32 + mtctr r4 +..ag: dcbf r0,r3 + addi r3,r3,-32 + bdnz ..ag + sync + mtmsr r9 + blr + function_epilog(dflush) +#endif /* CONFIG_440 */ #endif /* CONFIG_NAND_SPL */ +/*------------------------------------------------------------------------------- */ +/* Function: in8 */ +/* Description: Input 8 bits */ +/*------------------------------------------------------------------------------- */ + .globl in8 +in8: + lbz r3,0x0000(r3) + blr + +/*------------------------------------------------------------------------------- */ +/* Function: out8 */ +/* Description: Output 8 bits */ +/*------------------------------------------------------------------------------- */ + .globl out8 +out8: + stb r4,0x0000(r3) + blr + +/*------------------------------------------------------------------------------- */ +/* Function: out32 */ +/* Description: Output 32 bits */ +/*------------------------------------------------------------------------------- */ + .globl out32 +out32: + stw r4,0x0000(r3) + blr + +/*------------------------------------------------------------------------------- */ +/* Function: in32 */ +/* Description: Input 32 bits */ +/*------------------------------------------------------------------------------- */ + .globl in32 +in32: + lwz 3,0x0000(3) + blr + +invalidate_icache: + iccci r0,r0 /* for 405, iccci invalidates the */ + blr /* entire I cache */ + +invalidate_dcache: + addi r6,0,0x0000 /* clear GPR 6 */ + /* Do loop for # of dcache congruence classes. */ + lis r7, (CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)@ha /* TBS for large sized cache */ + ori r7, r7, (CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)@l + /* NOTE: dccci invalidates both */ + mtctr r7 /* ways in the D cache */ +..dcloop: + dccci 0,r6 /* invalidate line */ + addi r6,r6, CFG_CACHELINE_SIZE /* bump to next line */ + bdnz ..dcloop + blr /**************************************************************************/ /* PPC405EP specific stuff */ @@ -1892,13 +2017,6 @@ pll_wait: #endif /* CONFIG_405EP */ #if defined(CONFIG_440) -#define function_prolog(func_name) .text; \ - .align 2; \ - .globl func_name; \ - func_name: -#define function_epilog(func_name) .type func_name,@function; \ - .size func_name,.-func_name - /*----------------------------------------------------------------------------+ | mttlb3. +----------------------------------------------------------------------------*/ @@ -1946,47 +2064,4 @@ pll_wait: TLBRE(3,3,0) blr function_epilog(mftlb1) - -/*----------------------------------------------------------------------------+ -| dcbz_area. -+----------------------------------------------------------------------------*/ - function_prolog(dcbz_area) - rlwinm. r5,r4,0,27,31 - rlwinm r5,r4,27,5,31 - beq ..d_ra2 - addi r5,r5,0x0001 -..d_ra2:mtctr r5 -..d_ag2:dcbz r0,r3 - addi r3,r3,32 - bdnz ..d_ag2 - sync - blr - function_epilog(dcbz_area) - -/*----------------------------------------------------------------------------+ -| dflush. Assume 32K at vector address is cachable. -+----------------------------------------------------------------------------*/ - function_prolog(dflush) - mfmsr r9 - rlwinm r8,r9,0,15,13 - rlwinm r8,r8,0,17,15 - mtmsr r8 - addi r3,r0,0x0000 - mtspr dvlim,r3 - mfspr r3,ivpr - addi r4,r0,1024 - mtctr r4 -..dflush_loop: - lwz r6,0x0(r3) - addi r3,r3,32 - bdnz ..dflush_loop - addi r3,r3,-32 - mtctr r4 -..ag: dcbf r0,r3 - addi r3,r3,-32 - bdnz ..ag - sync - mtmsr r9 - blr - function_epilog(dflush) #endif /* CONFIG_440 */ diff --git a/disk/part.c b/disk/part.c index acc1a748e4..255b140698 100644..100755 --- a/disk/part.c +++ b/disk/part.c @@ -180,6 +180,7 @@ void dev_print (block_dev_desc_t *dev_desc) (CONFIG_COMMANDS & CFG_CMD_SCSI) || \ (CONFIG_COMMANDS & CFG_CMD_USB) || \ defined(CONFIG_MMC) || \ + (defined(CONFIG_MMC) && defined(CONFIG_LPC2292)) || \ defined(CONFIG_SYSTEMACE) ) #if defined(CONFIG_MAC_PARTITION) || \ @@ -219,7 +220,8 @@ void init_part (block_dev_desc_t * dev_desc) } -int get_partition_info (block_dev_desc_t *dev_desc, int part, disk_partition_t *info) +int get_partition_info (block_dev_desc_t *dev_desc, int part + , disk_partition_t *info) { switch (dev_desc->part_type) { #ifdef CONFIG_MAC_PARTITION @@ -325,7 +327,8 @@ void print_part (block_dev_desc_t * dev_desc) #else /* neither MAC nor DOS nor ISO partition configured */ -# error neither CONFIG_MAC_PARTITION nor CONFIG_DOS_PARTITION nor CONFIG_ISO_PARTITION configured! +# error neither CONFIG_MAC_PARTITION nor CONFIG_DOS_PARTITION +# error nor CONFIG_ISO_PARTITION configured! #endif #endif /* (CONFIG_COMMANDS & CFG_CMD_IDE) || CONFIG_COMMANDS & CFG_CMD_SCSI) */ diff --git a/doc/README.mpc8641hpcn b/doc/README.mpc8641hpcn index 3b88f8bc72..ac56ccaf23 100644 --- a/doc/README.mpc8641hpcn +++ b/doc/README.mpc8641hpcn @@ -96,14 +96,17 @@ To Flash U-Boot into the booting bank (0xFFC00000 - 0xFFFFFFFF): tftp 1000000 u-boot.bin protect off all - erase fff00000 ffffffff - cp.b 1000000 fff00100 80000 + erase fff00000 +$filesize + cp.b 1000000 fff00000 $filesize + +or use tftpflash command: + run tftpflash To Flash U-boot into the alternative bank (0xFF800000 - 0xFFBFFFFF): tftp 1000000 u-boot.bin - erase ffb00000 ffbfffff - cp.b 1000000 ffb00100 80000 + erase ffb00000 +$filesize + cp.b 1000000 ffb00000 $filesize 4. Memory Map diff --git a/drivers/Makefile b/drivers/Makefile index d68cba682b..c7fcc3f23e 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -30,7 +30,7 @@ LIB = $(obj)libdrivers.a COBJS = 3c589.o 5701rls.o ali512x.o atmel_usart.o \ bcm570x.o bcm570x_autoneg.o cfb_console.o cfi_flash.o \ cs8900.o ct69000.o dataflash.o dc2114x.o dm9000x.o \ - e1000.o eepro100.o \ + e1000.o eepro100.o enc28j60.o \ i8042.o inca-ip_sw.o keyboard.o \ lan91c96.o macb.o \ natsemi.o ne2000.o netarm_eth.o netconsole.o \ diff --git a/board/lpc2292sodimm/eth.c b/drivers/enc28j60.c index 249ab04393..98303aceee 100644..100755 --- a/board/lpc2292sodimm/eth.c +++ b/drivers/enc28j60.c @@ -17,9 +17,10 @@ #include <config.h> #include <common.h> +#ifdef CONFIG_ENC28J60 #include <net.h> #include <asm/arch/hardware.h> -#include "spi.h" +#include <asm/arch/spi.h> /* * Control Registers in Bank 0 @@ -36,7 +37,7 @@ #define CTL_REG_ERXSTL 0x08 #define CTL_REG_ERXSTH 0x09 #define CTL_REG_ERXNDL 0x0A -#define CTL_REG_ERXNDA 0x0B +#define CTL_REG_ERXNDH 0x0B #define CTL_REG_ERXRDPTL 0x0C #define CTL_REG_ERXRDPTH 0x0D #define CTL_REG_ERXWRPTL 0x0E @@ -137,7 +138,10 @@ #define PHY_REG_PHID1 0x02 #define PHY_REG_PHID2 0x03 - +/* taken from the Linux driver */ +#define PHY_REG_PHCON1 0x00 +#define PHY_REG_PHCON2 0x10 +#define PHY_REG_PHLCON 0x14 /* * Receive Filter Register (ERXFCON) bits @@ -274,6 +278,9 @@ /* Use the lower memory for receiver buffer. See errata pt. 5 */ #define ENC_RX_BUF_START 0x0000 #define ENC_TX_BUF_START 0x1800 +/* taken from the Linux driver */ +#define ENC_RX_BUF_END 0x17ff +#define ENC_TX_BUF_END 0x1fff /* maximum frame length */ #define ENC_MAX_FRM_LEN 1518 @@ -293,6 +300,7 @@ static void encBitClr (unsigned char regNo, unsigned char data); static void encReset (void); static void encInit (unsigned char *pEthAddr); static unsigned short phyRead (unsigned char addr); +static void phyWrite(unsigned char, unsigned short); static void encPoll (void); static void encRx (void); @@ -318,10 +326,12 @@ static int rxResetCounter = 0; #define RX_RESET_COUNTER 1000; /*----------------------------------------------------------------------------- - * Returns 0 when failes otherwize 1 + * Always returns 0 */ int eth_init (bd_t * bis) { + unsigned char estatVal; + /* configure GPIO */ (*((volatile unsigned long *) IO1DIR)) |= ENC_SPI_SLAVE_CS; (*((volatile unsigned long *) IO1DIR)) |= ENC_RESET; @@ -332,6 +342,14 @@ int eth_init (bd_t * bis) spi_init (); + /* taken from the Linux driver - dangerous stuff here! */ + /* Wait for CLKRDY to become set (i.e., check that we can communicate with + the ENC) */ + do + { + estatVal = m_nic_read(CTL_REG_ESTAT); + } while ((estatVal & 0x08) || (~estatVal & ENC_ESTAT_CLKRDY)); + /* initialize controller */ encReset (); encInit (bis->bi_enetaddr); @@ -353,6 +371,10 @@ int eth_send (volatile void *packet, int length) m_nic_write (CTL_REG_EWRPTL, (ENC_TX_BUF_START & 0xff)); m_nic_write (CTL_REG_EWRPTH, (ENC_TX_BUF_START >> 8)); + /* set ETXND */ + m_nic_write (CTL_REG_ETXNDL, (length + ENC_TX_BUF_START) & 0xFF); + m_nic_write (CTL_REG_ETXNDH, (length + ENC_TX_BUF_START) >> 8); + /* set ETXST */ m_nic_write (CTL_REG_ETXSTL, ENC_TX_BUF_START & 0xFF); m_nic_write (CTL_REG_ETXSTH, ENC_TX_BUF_START >> 8); @@ -360,9 +382,15 @@ int eth_send (volatile void *packet, int length) /* write packet */ m_nic_write_data (length, (unsigned char *) packet); - /* set ETXND */ - m_nic_write (CTL_REG_ETXNDL, (length + ENC_TX_BUF_START) & 0xFF); - m_nic_write (CTL_REG_ETXNDH, (length + ENC_TX_BUF_START) >> 8); + /* taken from the Linux driver */ + /* Verify that the internal transmit logic has not been altered by excessive + collisions. See Errata B4 12 and 14. + */ + if (m_nic_read(CTL_REG_EIR) & ENC_EIR_TXERIF) { + m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_TXRST); + m_nic_bfc(CTL_REG_ECON1, ENC_ECON1_TXRST); + } + m_nic_bfc(CTL_REG_EIR, (ENC_EIR_TXERIF | ENC_EIR_TXIF)); /* set ECON1.TXRTS */ m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_TXRTS); @@ -423,8 +451,10 @@ static void encPoll (void) volatile unsigned char estat_reg; unsigned char pkt_cnt; +#ifdef CONFIG_USE_IRQ /* clear global interrupt enable bit in enc28j60 */ m_nic_bfc (CTL_REG_EIE, ENC_EIE_INTIE); +#endif estat_reg = m_nic_read (CTL_REG_ESTAT); eir_reg = m_nic_read (CTL_REG_EIR); @@ -462,8 +492,10 @@ static void encPoll (void) m_nic_bfc (CTL_REG_EIR, ENC_EIR_TXERIF); } +#ifdef CONFIG_USE_IRQ /* set global interrupt enable bit in enc28j60 */ m_nic_bfs (CTL_REG_EIE, ENC_EIE_INTIE); +#endif } static void encRx (void) @@ -473,6 +505,7 @@ static void encRx (void) unsigned short status; unsigned char eir_reg; unsigned char pkt_cnt = 0; + unsigned short rxbuf_rdpt; /* switch to bank 0 */ m_nic_bfc (CTL_REG_ECON1, (ENC_ECON1_BSEL1 | ENC_ECON1_BSEL0)); @@ -489,18 +522,19 @@ static void encRx (void) status = buffer[4]; status |= (unsigned short) buffer[5] << 8; - if (pkt_len <= ENC_MAX_FRM_LEN) { + if (pkt_len <= ENC_MAX_FRM_LEN) copy_len = pkt_len; - } else { + else copy_len = 0; - /* p_priv->stats.rx_dropped++; */ - /* we will drop this packet */ - } - if ((status & (1L << 7)) == 0) { /* check Received Ok bit */ + if ((status & (1L << 7)) == 0) /* check Received Ok bit */ + copy_len = 0; + + /* taken from the Linux driver */ + /* check if next pointer is resonable */ + if ((((unsigned int)next_pointer_msb << 8) | + (unsigned int)next_pointer_lsb) >= ENC_TX_BUF_START) copy_len = 0; - /* p_priv->stats.rx_errors++; */ - } if (copy_len > 0) { m_nic_read_data (copy_len, buffer); @@ -513,6 +547,22 @@ static void encRx (void) /* decrease packet counter */ m_nic_bfs (CTL_REG_ECON2, ENC_ECON2_PKTDEC); + /* taken from the Linux driver */ + /* Only odd values should be written to ERXRDPTL, + * see errata B4 pt.13 + */ + rxbuf_rdpt = (next_pointer_msb << 8 | next_pointer_lsb) - 1; + if ((rxbuf_rdpt < (m_nic_read(CTL_REG_ERXSTH) << 8 | + m_nic_read(CTL_REG_ERXSTL))) || (rxbuf_rdpt > + (m_nic_read(CTL_REG_ERXNDH) << 8 | + m_nic_read(CTL_REG_ERXNDL)))) { + m_nic_write(CTL_REG_ERXRDPTL, m_nic_read(CTL_REG_ERXNDL)); + m_nic_write(CTL_REG_ERXRDPTH, m_nic_read(CTL_REG_ERXNDH)); + } else { + m_nic_write(CTL_REG_ERXRDPTL, rxbuf_rdpt & 0xFF); + m_nic_write(CTL_REG_ERXRDPTH, rxbuf_rdpt >> 8); + } + /* move to bank 1 */ m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL1); m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL0); @@ -535,8 +585,6 @@ static void encRx (void) eir_reg = m_nic_read (CTL_REG_EIR); } while (pkt_cnt); /* Use EPKTCNT not EIR.PKTIF flag, see errata pt. 6 */ - m_nic_write (CTL_REG_ERXRDPTL, next_pointer_lsb); - m_nic_write (CTL_REG_ERXRDPTH, next_pointer_msb); } static void encWriteReg (unsigned char regNo, unsigned char data) @@ -700,12 +748,6 @@ static void encReset (void) /* sleep 1 ms. See errata pt. 2 */ udelay (1000); - -#if 0 - (*((volatile unsigned long *) IO1CLR)) &= ENC_RESET; - mdelay (5); - (*((volatile unsigned long *) IO1SET)) &= ENC_RESET; -#endif } static void encInit (unsigned char *pEthAddr) @@ -720,44 +762,21 @@ static void encInit (unsigned char *pEthAddr) * Setup the buffer space. The reset values are valid for the * other pointers. */ -#if 0 /* We shall not write to ERXST, see errata pt. 5. Instead we have to make sure that ENC_RX_BUS_START is 0. */ m_nic_write_retry (CTL_REG_ERXSTL, (ENC_RX_BUF_START & 0xFF), 1); m_nic_write_retry (CTL_REG_ERXSTH, (ENC_RX_BUF_START >> 8), 1); -#endif + + /* taken from the Linux driver */ + m_nic_write_retry (CTL_REG_ERXNDL, (ENC_RX_BUF_END & 0xFF), 1); + m_nic_write_retry (CTL_REG_ERXNDH, (ENC_RX_BUF_END >> 8), 1); + m_nic_write_retry (CTL_REG_ERDPTL, (ENC_RX_BUF_START & 0xFF), 1); m_nic_write_retry (CTL_REG_ERDPTH, (ENC_RX_BUF_START >> 8), 1); next_pointer_lsb = (ENC_RX_BUF_START & 0xFF); next_pointer_msb = (ENC_RX_BUF_START >> 8); - /* - * For tracking purposes, the ERXRDPT registers should be programmed with - * the same value. This is the read pointer. - */ - m_nic_write (CTL_REG_ERXRDPTL, (ENC_RX_BUF_START & 0xFF)); - m_nic_write_retry (CTL_REG_ERXRDPTH, (ENC_RX_BUF_START >> 8), 1); - - /* Setup receive filters. */ - - /* move to bank 1 */ - m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL1); - m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL0); - - /* OR-filtering, Unicast, CRC-check and broadcast */ - m_nic_write_retry (CTL_REG_ERXFCON, - (ENC_RFR_UCEN | ENC_RFR_CRCEN | ENC_RFR_BCEN), 1); - - /* Wait for Oscillator Start-up Timer (OST). */ - while ((m_nic_read (CTL_REG_ESTAT) & ENC_ESTAT_CLKRDY) == 0) { - static int cnt = 0; - - if (cnt++ >= 1000) { - cnt = 0; - } - } - /* verify identification */ phid1 = phyRead (PHY_REG_PHID1); phid2 = phyRead (PHY_REG_PHID2); @@ -780,16 +799,34 @@ static void encInit (unsigned char *pEthAddr) /* switch to bank 2 */ m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL0); m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL1); - /* clear MAC reset bits */ - m_nic_write_retry (CTL_REG_MACON2, 0, 1); /* enable MAC to receive frames */ - m_nic_write_retry (CTL_REG_MACON1, ENC_MACON1_MARXEN, 10); + /* added some bits from the Linux driver */ + m_nic_write_retry (CTL_REG_MACON1 + ,(ENC_MACON1_MARXEN | ENC_MACON1_TXPAUS | ENC_MACON1_RXPAUS) + ,10); /* configure pad, tx-crc and duplex */ - /* TODO maybe enable FRMLNEN */ - m_nic_write_retry (CTL_REG_MACON3, - (ENC_MACON3_PADCFG0 | ENC_MACON3_TXCRCEN), 10); + /* added a bit from the Linux driver */ + m_nic_write_retry (CTL_REG_MACON3 + ,(ENC_MACON3_PADCFG0 | ENC_MACON3_TXCRCEN | ENC_MACON3_FRMLNEN) + ,10); + + /* added 4 new lines from the Linux driver */ + /* Allow infinite deferals if the medium is continously busy */ + m_nic_write_retry(CTL_REG_MACON4, (1<<6) /*ENC_MACON4_DEFER*/, 10); + + /* Late collisions occur beyond 63 bytes */ + m_nic_write_retry(CTL_REG_MACLCON2, 63, 10); + + /* Set (low byte) Non-Back-to_Back Inter-Packet Gap. Recommended 0x12 */ + m_nic_write_retry(CTL_REG_MAIPGL, 0x12, 10); + + /* + * Set (high byte) Non-Back-to_Back Inter-Packet Gap. Recommended + * 0x0c for half-duplex. Nothing for full-duplex + */ + m_nic_write_retry(CTL_REG_MAIPGH, 0x0C, 10); /* set maximum frame length */ m_nic_write_retry (CTL_REG_MAMXFLL, (ENC_MAX_FRM_LEN & 0xff), 10); @@ -801,15 +838,6 @@ static void encInit (unsigned char *pEthAddr) */ m_nic_write_retry (CTL_REG_MABBIPG, 0x12, 10); - /* Set (low byte) Non-Back-to_Back Inter-Packet Gap. Recommended 0x12 */ - m_nic_write_retry (CTL_REG_MAIPGL, 0x12, 10); - - /* - * Set (high byte) Non-Back-to_Back Inter-Packet Gap. Recommended - * 0x0c for half-duplex. Nothing for full-duplex - */ - m_nic_write_retry (CTL_REG_MAIPGH, 0x0C, 10); - /* set MAC address */ /* switch to bank 3 */ @@ -823,18 +851,35 @@ static void encInit (unsigned char *pEthAddr) m_nic_write_retry (CTL_REG_MAADR5, pEthAddr[0], 1); /* - * Receive settings + * PHY Initialization taken from the Linux driver */ - /* auto-increment RX-pointer when reading a received packet */ - m_nic_bfs (CTL_REG_ECON2, ENC_ECON2_AUTOINC); + /* Prevent automatic loopback of data beeing transmitted by setting + ENC_PHCON2_HDLDIS */ + phyWrite(PHY_REG_PHCON2, (1<<8)); + + /* LEDs configuration + * LEDA: LACFG = 0100 -> display link status + * LEDB: LBCFG = 0111 -> display TX & RX activity + * STRCH = 1 -> LED pulses + */ + phyWrite(PHY_REG_PHLCON, 0x0472); + /* Reset PDPXMD-bit => half duplex */ + phyWrite(PHY_REG_PHCON1, 0); + + /* + * Receive settings + */ + +#ifdef CONFIG_USE_IRQ /* enable interrupts */ m_nic_bfs (CTL_REG_EIE, ENC_EIE_PKTIE); m_nic_bfs (CTL_REG_EIE, ENC_EIE_TXIE); m_nic_bfs (CTL_REG_EIE, ENC_EIE_RXERIE); m_nic_bfs (CTL_REG_EIE, ENC_EIE_TXERIE); m_nic_bfs (CTL_REG_EIE, ENC_EIE_INTIE); +#endif } /***************************************************************************** @@ -864,6 +909,11 @@ static unsigned short phyRead (unsigned char addr) /* set MICMD.MIIRD */ m_nic_write (CTL_REG_MICMD, ENC_MICMD_MIIRD); + /* taken from the Linux driver */ + /* move to bank 3 */ + m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL0); + m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL1); + /* poll MISTAT.BUSY bit until operation is complete */ while ((m_nic_read (CTL_REG_MISTAT) & ENC_MISTAT_BUSY) != 0) { static int cnt = 0; @@ -875,6 +925,11 @@ static unsigned short phyRead (unsigned char addr) } } + /* taken from the Linux driver */ + /* move to bank 2 */ + m_nic_bfc(CTL_REG_ECON1, ENC_ECON1_BSEL0); + m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL1); + /* clear MICMD.MIIRD */ m_nic_write (CTL_REG_MICMD, 0); @@ -883,3 +938,46 @@ static unsigned short phyRead (unsigned char addr) return ret; } + +/***************************************************************************** + * + * Taken from the Linux driver. + * Description: + * Write PHY registers. + * + * NOTE! This function will change to Bank 3. + * + * Params: + * [in] addr address of the register to write to + * [in] data to be written + * + * Returns: + * None + */ +static void phyWrite(unsigned char addr, unsigned short data) +{ + /* move to bank 2 */ + m_nic_bfc(CTL_REG_ECON1, ENC_ECON1_BSEL0); + m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL1); + + /* write address to MIREGADR */ + m_nic_write(CTL_REG_MIREGADR, addr); + + m_nic_write(CTL_REG_MIWRL, data & 0xff); + m_nic_write(CTL_REG_MIWRH, data >> 8); + + /* move to bank 3 */ + m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL0); + m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL1); + + /* poll MISTAT.BUSY bit until operation is complete */ + while((m_nic_read(CTL_REG_MISTAT) & ENC_MISTAT_BUSY) != 0) { + static int cnt = 0; + + if(cnt++ >= 1000) { + cnt = 0; + } + } +} + +#endif /* CONFIG_ENC28J60 */ diff --git a/drivers/nand/nand_ecc.c b/drivers/nand/nand_ecc.c index f33be9655d..90274e6d6d 100644 --- a/drivers/nand/nand_ecc.c +++ b/drivers/nand/nand_ecc.c @@ -40,6 +40,13 @@ #if (CONFIG_COMMANDS & CFG_CMD_NAND) && !defined(CFG_NAND_LEGACY) #include<linux/mtd/mtd.h> + +/* + * NAND-SPL has no sofware ECC for now, so don't include nand_calculate_ecc(), + * only nand_correct_data() is needed + */ + +#ifndef CONFIG_NAND_SPL /* * Pre-calculated 256-way 1 byte column parity */ @@ -62,90 +69,75 @@ static const u_char nand_ecc_precalc_table[] = { 0x00, 0x55, 0x56, 0x03, 0x59, 0x0c, 0x0f, 0x5a, 0x5a, 0x0f, 0x0c, 0x59, 0x03, 0x56, 0x55, 0x00 }; - -/** - * nand_trans_result - [GENERIC] create non-inverted ECC - * @reg2: line parity reg 2 - * @reg3: line parity reg 3 - * @ecc_code: ecc - * - * Creates non-inverted ECC code from line parity - */ -static void nand_trans_result(u_char reg2, u_char reg3, - u_char *ecc_code) -{ - u_char a, b, i, tmp1, tmp2; - - /* Initialize variables */ - a = b = 0x80; - tmp1 = tmp2 = 0; - - /* Calculate first ECC byte */ - for (i = 0; i < 4; i++) { - if (reg3 & a) /* LP15,13,11,9 --> ecc_code[0] */ - tmp1 |= b; - b >>= 1; - if (reg2 & a) /* LP14,12,10,8 --> ecc_code[0] */ - tmp1 |= b; - b >>= 1; - a >>= 1; - } - - /* Calculate second ECC byte */ - b = 0x80; - for (i = 0; i < 4; i++) { - if (reg3 & a) /* LP7,5,3,1 --> ecc_code[1] */ - tmp2 |= b; - b >>= 1; - if (reg2 & a) /* LP6,4,2,0 --> ecc_code[1] */ - tmp2 |= b; - b >>= 1; - a >>= 1; - } - - /* Store two of the ECC bytes */ - ecc_code[0] = tmp1; - ecc_code[1] = tmp2; -} - /** - * nand_calculate_ecc - [NAND Interface] Calculate 3 byte ECC code for 256 byte block + * nand_calculate_ecc - [NAND Interface] Calculate 3-byte ECC for 256-byte block * @mtd: MTD block structure * @dat: raw data * @ecc_code: buffer for ECC */ -int nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code) +int nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, + u_char *ecc_code) { - u_char idx, reg1, reg2, reg3; - int j; + uint8_t idx, reg1, reg2, reg3, tmp1, tmp2; + int i; /* Initialize variables */ reg1 = reg2 = reg3 = 0; - ecc_code[0] = ecc_code[1] = ecc_code[2] = 0; /* Build up column parity */ - for(j = 0; j < 256; j++) { - + for(i = 0; i < 256; i++) { /* Get CP0 - CP5 from table */ - idx = nand_ecc_precalc_table[dat[j]]; + idx = nand_ecc_precalc_table[*dat++]; reg1 ^= (idx & 0x3f); /* All bit XOR = 1 ? */ if (idx & 0x40) { - reg3 ^= (u_char) j; - reg2 ^= ~((u_char) j); + reg3 ^= (uint8_t) i; + reg2 ^= ~((uint8_t) i); } } /* Create non-inverted ECC code from line parity */ - nand_trans_result(reg2, reg3, ecc_code); + tmp1 = (reg3 & 0x80) >> 0; /* B7 -> B7 */ + tmp1 |= (reg2 & 0x80) >> 1; /* B7 -> B6 */ + tmp1 |= (reg3 & 0x40) >> 1; /* B6 -> B5 */ + tmp1 |= (reg2 & 0x40) >> 2; /* B6 -> B4 */ + tmp1 |= (reg3 & 0x20) >> 2; /* B5 -> B3 */ + tmp1 |= (reg2 & 0x20) >> 3; /* B5 -> B2 */ + tmp1 |= (reg3 & 0x10) >> 3; /* B4 -> B1 */ + tmp1 |= (reg2 & 0x10) >> 4; /* B4 -> B0 */ + + tmp2 = (reg3 & 0x08) << 4; /* B3 -> B7 */ + tmp2 |= (reg2 & 0x08) << 3; /* B3 -> B6 */ + tmp2 |= (reg3 & 0x04) << 3; /* B2 -> B5 */ + tmp2 |= (reg2 & 0x04) << 2; /* B2 -> B4 */ + tmp2 |= (reg3 & 0x02) << 2; /* B1 -> B3 */ + tmp2 |= (reg2 & 0x02) << 1; /* B1 -> B2 */ + tmp2 |= (reg3 & 0x01) << 1; /* B0 -> B1 */ + tmp2 |= (reg2 & 0x01) << 0; /* B7 -> B0 */ /* Calculate final ECC code */ - ecc_code[0] = ~ecc_code[0]; - ecc_code[1] = ~ecc_code[1]; +#ifdef CONFIG_MTD_NAND_ECC_SMC + ecc_code[0] = ~tmp2; + ecc_code[1] = ~tmp1; +#else + ecc_code[0] = ~tmp1; + ecc_code[1] = ~tmp2; +#endif ecc_code[2] = ((~reg1) << 2) | 0x03; + return 0; } +#endif /* CONFIG_NAND_SPL */ + +static inline int countbits(uint32_t byte) +{ + int res = 0; + + for (;byte; byte >>= 1) + res += byte & 0x01; + return res; +} /** * nand_correct_data - [NAND Interface] Detect and correct bit error(s) @@ -156,88 +148,52 @@ int nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code * * Detect and correct a 1 bit error for 256 byte block */ -int nand_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc) +int nand_correct_data(struct mtd_info *mtd, u_char *dat, + u_char *read_ecc, u_char *calc_ecc) { - u_char a, b, c, d1, d2, d3, add, bit, i; + uint8_t s0, s1, s2; + +#ifdef CONFIG_MTD_NAND_ECC_SMC + s0 = calc_ecc[0] ^ read_ecc[0]; + s1 = calc_ecc[1] ^ read_ecc[1]; + s2 = calc_ecc[2] ^ read_ecc[2]; +#else + s1 = calc_ecc[0] ^ read_ecc[0]; + s0 = calc_ecc[1] ^ read_ecc[1]; + s2 = calc_ecc[2] ^ read_ecc[2]; +#endif + if ((s0 | s1 | s2) == 0) + return 0; - /* Do error detection */ - d1 = calc_ecc[0] ^ read_ecc[0]; - d2 = calc_ecc[1] ^ read_ecc[1]; - d3 = calc_ecc[2] ^ read_ecc[2]; + /* Check for a single bit error */ + if( ((s0 ^ (s0 >> 1)) & 0x55) == 0x55 && + ((s1 ^ (s1 >> 1)) & 0x55) == 0x55 && + ((s2 ^ (s2 >> 1)) & 0x54) == 0x54) { - if ((d1 | d2 | d3) == 0) { - /* No errors */ - return 0; - } - else { - a = (d1 ^ (d1 >> 1)) & 0x55; - b = (d2 ^ (d2 >> 1)) & 0x55; - c = (d3 ^ (d3 >> 1)) & 0x54; - - /* Found and will correct single bit error in the data */ - if ((a == 0x55) && (b == 0x55) && (c == 0x54)) { - c = 0x80; - add = 0; - a = 0x80; - for (i=0; i<4; i++) { - if (d1 & c) - add |= a; - c >>= 2; - a >>= 1; - } - c = 0x80; - for (i=0; i<4; i++) { - if (d2 & c) - add |= a; - c >>= 2; - a >>= 1; - } - bit = 0; - b = 0x04; - c = 0x80; - for (i=0; i<3; i++) { - if (d3 & c) - bit |= b; - c >>= 2; - b >>= 1; - } - b = 0x01; - a = dat[add]; - a ^= (b << bit); - dat[add] = a; - return 1; - } else { - i = 0; - while (d1) { - if (d1 & 0x01) - ++i; - d1 >>= 1; - } - while (d2) { - if (d2 & 0x01) - ++i; - d2 >>= 1; - } - while (d3) { - if (d3 & 0x01) - ++i; - d3 >>= 1; - } - if (i == 1) { - /* ECC Code Error Correction */ - read_ecc[0] = calc_ecc[0]; - read_ecc[1] = calc_ecc[1]; - read_ecc[2] = calc_ecc[2]; - return 2; - } - else { - /* Uncorrectable Error */ - return -1; - } - } + uint32_t byteoffs, bitnum; + + byteoffs = (s1 << 0) & 0x80; + byteoffs |= (s1 << 1) & 0x40; + byteoffs |= (s1 << 2) & 0x20; + byteoffs |= (s1 << 3) & 0x10; + + byteoffs |= (s0 >> 4) & 0x08; + byteoffs |= (s0 >> 3) & 0x04; + byteoffs |= (s0 >> 2) & 0x02; + byteoffs |= (s0 >> 1) & 0x01; + + bitnum = (s2 >> 5) & 0x04; + bitnum |= (s2 >> 4) & 0x02; + bitnum |= (s2 >> 3) & 0x01; + + dat[byteoffs] ^= (1 << bitnum); + + return 1; } - /* Should never happen */ + if(countbits(s0 | ((uint32_t)s1 << 8) | ((uint32_t)s2 <<16)) == 1) + return 1; + return -1; } diff --git a/fs/fat/fat.c b/fs/fat/fat.c index a823b5aba4..3007608360 100644..100755 --- a/fs/fat/fat.c +++ b/fs/fat/fat.c @@ -59,7 +59,8 @@ int disk_read (__u32 startblock, __u32 getsize, __u8 * bufptr) if (cur_dev == NULL) return -1; if (cur_dev->block_read) { - return cur_dev->block_read (cur_dev->dev, startblock, getsize, (unsigned long *)bufptr); + return cur_dev->block_read (cur_dev->dev + , startblock, getsize, (unsigned long *)bufptr); } return -1; } @@ -89,8 +90,11 @@ fat_register_device(block_dev_desc_t *dev_desc, int part_no) part_offset=0; } else { -#if (CONFIG_COMMANDS & CFG_CMD_IDE) || (CONFIG_COMMANDS & CFG_CMD_SCSI) || \ - (CONFIG_COMMANDS & CFG_CMD_USB) || defined(CONFIG_SYSTEMACE) +#if ((CONFIG_COMMANDS & CFG_CMD_IDE) || \ + (CONFIG_COMMANDS & CFG_CMD_SCSI) || \ + (CONFIG_COMMANDS & CFG_CMD_USB) || \ + (defined(CONFIG_MMC) && defined(CONFIG_LPC2292)) || \ + defined(CONFIG_SYSTEMACE) ) disk_partition_t info; if(!get_partition_info(dev_desc, part_no, &info)) { part_offset = info.start; @@ -993,7 +997,8 @@ file_fat_detectfs(void) memcpy (vol_label, volinfo.volume_label, 11); vol_label[11] = '\0'; volinfo.fs_type[5]='\0'; - printf("Partition %d: Filesystem: %s \"%s\"\n",cur_part,volinfo.fs_type,vol_label); + printf("Partition %d: Filesystem: %s \"%s\"\n" + ,cur_part,volinfo.fs_type,vol_label); return 0; } diff --git a/include/asm-arm/arch-arm720t/hardware.h b/include/asm-arm/arch-arm720t/hardware.h index 1e9cd41169..3056ca7f67 100644 --- a/include/asm-arm/arch-arm720t/hardware.h +++ b/include/asm-arm/arch-arm720t/hardware.h @@ -36,8 +36,6 @@ /* include armadillo specific hardware file if there was one */ #elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR) /* include IntegratorCP/CM720T specific hardware file if there was one */ -#elif defined(CONFIG_LPC2292) -#include <asm-arm/arch-arm720t/lpc2292_registers.h> #else #error No hardware file defined for this configuration #endif diff --git a/include/asm-arm/arch-lpc2292/hardware.h b/include/asm-arm/arch-lpc2292/hardware.h new file mode 100644 index 0000000000..fd2b464e37 --- /dev/null +++ b/include/asm-arm/arch-lpc2292/hardware.h @@ -0,0 +1,33 @@ +#ifndef __ASM_ARCH_HARDWARE_H +#define __ASM_ARCH_HARDWARE_H + +/* + * Copyright (c) 2004 Cucy Systems (http://www.cucy.com) + * Curt Brune <curt@cucy.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#if defined(CONFIG_LPC2292) +#include <asm-arm/arch-lpc2292/lpc2292_registers.h> +#else +#error No hardware file defined for this configuration +#endif + +#endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/include/asm-arm/arch-arm720t/lpc2292_registers.h b/include/asm-arm/arch-lpc2292/lpc2292_registers.h index 5715f3ef74..5715f3ef74 100644 --- a/include/asm-arm/arch-arm720t/lpc2292_registers.h +++ b/include/asm-arm/arch-lpc2292/lpc2292_registers.h diff --git a/include/asm-arm/arch-arm720t/mmc.h b/include/asm-arm/arch-lpc2292/mmc.h index e664a5f678..e664a5f678 100644 --- a/include/asm-arm/arch-arm720t/mmc.h +++ b/include/asm-arm/arch-lpc2292/mmc.h diff --git a/board/lpc2292sodimm/spi.h b/include/asm-arm/arch-lpc2292/spi.h index 6ae66e8ba7..6ae66e8ba7 100644 --- a/board/lpc2292sodimm/spi.h +++ b/include/asm-arm/arch-lpc2292/spi.h diff --git a/include/asm-ppc/io.h b/include/asm-ppc/io.h index bbc9ba0be6..03289bcc21 100644 --- a/include/asm-ppc/io.h +++ b/include/asm-ppc/io.h @@ -105,6 +105,11 @@ static inline void sync(void) __asm__ __volatile__ ("sync" : : : "memory"); } +static inline void isync(void) +{ + __asm__ __volatile__ ("isync" : : : "memory"); +} + /* Enforce in-order execution of data I/O. * No distinction between read/write on PPC; use eieio for all three. */ @@ -114,74 +119,90 @@ static inline void sync(void) /* * 8, 16 and 32 bit, big and little endian I/O operations, with barrier. + * + * Read operations have additional twi & isync to make sure the read + * is actually performed (i.e. the data has come back) before we start + * executing any following instructions. */ -extern inline int in_8(volatile u8 *addr) +#define __iomem +extern inline int in_8(const volatile unsigned char __iomem *addr) { - int ret; + int ret; - __asm__ __volatile__("lbz%U1%X1 %0,%1; eieio" : "=r" (ret) : "m" (*addr)); - return ret; + __asm__ __volatile__( + "sync; lbz%U1%X1 %0,%1;\n" + "twi 0,%0,0;\n" + "isync" : "=r" (ret) : "m" (*addr)); + return ret; } -extern inline void out_8(volatile u8 *addr, int val) +extern inline void out_8(volatile unsigned char __iomem *addr, int val) { - __asm__ __volatile__("stb%U0%X0 %1,%0; eieio" : "=m" (*addr) : "r" (val)); + __asm__ __volatile__("stb%U0%X0 %1,%0; eieio" : "=m" (*addr) : "r" (val)); } -extern inline int in_le16(volatile u16 *addr) +extern inline int in_le16(const volatile unsigned short __iomem *addr) { - int ret; + int ret; - __asm__ __volatile__("lhbrx %0,0,%1; eieio" : "=r" (ret) : - "r" (addr), "m" (*addr)); - return ret; + __asm__ __volatile__("sync; lhbrx %0,0,%1;\n" + "twi 0,%0,0;\n" + "isync" : "=r" (ret) : + "r" (addr), "m" (*addr)); + return ret; } -extern inline int in_be16(volatile u16 *addr) +extern inline int in_be16(const volatile unsigned short __iomem *addr) { - int ret; + int ret; - __asm__ __volatile__("lhz%U1%X1 %0,%1; eieio" : "=r" (ret) : "m" (*addr)); - return ret; + __asm__ __volatile__("sync; lhz%U1%X1 %0,%1;\n" + "twi 0,%0,0;\n" + "isync" : "=r" (ret) : "m" (*addr)); + return ret; } -extern inline void out_le16(volatile u16 *addr, int val) +extern inline void out_le16(volatile unsigned short __iomem *addr, int val) { - __asm__ __volatile__("sthbrx %1,0,%2; eieio" : "=m" (*addr) : - "r" (val), "r" (addr)); + __asm__ __volatile__("sync; sthbrx %1,0,%2" : "=m" (*addr) : + "r" (val), "r" (addr)); } -extern inline void out_be16(volatile u16 *addr, int val) +extern inline void out_be16(volatile unsigned short __iomem *addr, int val) { - __asm__ __volatile__("sth%U0%X0 %1,%0; eieio" : "=m" (*addr) : "r" (val)); + __asm__ __volatile__("sync; sth%U0%X0 %1,%0" : "=m" (*addr) : "r" (val)); } -extern inline unsigned in_le32(volatile u32 *addr) +extern inline unsigned in_le32(const volatile unsigned __iomem *addr) { - unsigned ret; + unsigned ret; - __asm__ __volatile__("lwbrx %0,0,%1; eieio" : "=r" (ret) : - "r" (addr), "m" (*addr)); - return ret; + __asm__ __volatile__("sync; lwbrx %0,0,%1;\n" + "twi 0,%0,0;\n" + "isync" : "=r" (ret) : + "r" (addr), "m" (*addr)); + return ret; } -extern inline unsigned in_be32(volatile u32 *addr) +extern inline unsigned in_be32(const volatile unsigned __iomem *addr) { - unsigned ret; + unsigned ret; - __asm__ __volatile__("lwz%U1%X1 %0,%1; eieio" : "=r" (ret) : "m" (*addr)); - return ret; + __asm__ __volatile__("sync; lwz%U1%X1 %0,%1;\n" + "twi 0,%0,0;\n" + "isync" : "=r" (ret) : "m" (*addr)); + return ret; } -extern inline void out_le32(volatile unsigned *addr, int val) +extern inline void out_le32(volatile unsigned __iomem *addr, int val) { - __asm__ __volatile__("stwbrx %1,0,%2; eieio" : "=m" (*addr) : - "r" (val), "r" (addr)); + __asm__ __volatile__("sync; stwbrx %1,0,%2" : "=m" (*addr) : + "r" (val), "r" (addr)); } -extern inline void out_be32(volatile unsigned *addr, int val) +extern inline void out_be32(volatile unsigned __iomem *addr, int val) { - __asm__ __volatile__("stw%U0%X0 %1,%0; eieio" : "=m" (*addr) : "r" (val)); + __asm__ __volatile__("sync; stw%U0%X0 %1,%0" : "=m" (*addr) : "r" (val)); } #endif diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index bbe35053dd..41daa2bfea 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -577,6 +577,7 @@ #define CONFIG_HOSTNAME unknown #define CONFIG_ROOTPATH /opt/nfsroot #define CONFIG_BOOTFILE uImage +#define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ #define CONFIG_SERVERIP 192.168.1.1 #define CONFIG_GATEWAYIP 192.168.1.1 @@ -592,10 +593,17 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ + "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ + "tftpflash=tftpboot $loadaddr $uboot; " \ + "protect off " MK_STR(TEXT_BASE) " +$filesize; " \ + "erase " MK_STR(TEXT_BASE) " +$filesize; " \ + "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \ + "protect on " MK_STR(TEXT_BASE) " +$filesize; " \ + "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \ "consoledev=ttyS0\0" \ "ramdiskaddr=2000000\0" \ "ramdiskfile=your.ramdisk.u-boot\0" \ - "dtbaddr=400000\0" \ + "dtbaddr=c00000\0" \ "dtbfile=mpc8641_hpcn.dtb\0" \ "en-wd=mw.b f8100010 0x08; echo -expect:- 08; md.b f8100010 1\0" \ "dis-wd=mw.b f8100010 0x00; echo -expect:- 00; md.b f8100010 1\0" \ diff --git a/include/configs/SMN42.h b/include/configs/SMN42.h new file mode 100755 index 0000000000..d588818fc2 --- /dev/null +++ b/include/configs/SMN42.h @@ -0,0 +1,199 @@ +/* + * (C) Copyright 2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Configuation settings for the SMN42 board from Siemens. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * If we are developing, we might want to start u-boot from ram + * so we MUST NOT initialize critical regs like mem-timing ... + */ +#undef CONFIG_INIT_CRITICAL /* undef for developing */ + +#undef CONFIG_SKIP_LOWLEVEL_INIT +#undef CONFIG_SKIP_RELOCATE_UBOOT + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_ARM7 1 /* This is a ARM7 CPU */ +#define CONFIG_ARM_THUMB 1 /* this is an ARM720TDMI */ +#define CONFIG_LPC2292 +#undef CONFIG_ARM7_REVD /* disable ARM720 REV.D Workarounds */ + +#undef CONFIG_USE_IRQ /* don't need them anymore */ + +/* + * Size of malloc() pool + */ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ + +/* + * Hardware drivers + */ + +/* + * select serial console configuration + */ +#define CONFIG_SERIAL1 1 /* we use Serial line 1 */ + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE) + +/* enable I2C and select the hardware/software driver */ +#undef CONFIG_HARD_I2C /* I2C with hardware support */ +#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */ +/* this would be 0xAE if E0, E1 and E2 were pulled high */ +#define CFG_I2C_SLAVE 0xA0 +#define CFG_I2C_EEPROM_ADDR (0xA0 >> 1) +#define CFG_I2C_EEPROM_ADDR_LEN 2 /* 16 bit address */ +#define CFG_EEPROM_PAGE_WRITE_BITS 6 /* 64 bytes per write */ +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20 +/* not used but required by devices.c */ +#define CFG_I2C_SPEED 10000 + +#ifdef CONFIG_SOFT_I2C +/* + * Software (bit-bang) I2C driver configuration + */ +#define SCL 0x00000004 /* P0.2 */ +#define SDA 0x00000008 /* P0.3 */ + +#define I2C_READ ((GET32(IO0PIN) & SDA) ? 1 : 0) +#define I2C_SDA(x) { if (x) PUT32(IO0SET, SDA); else PUT32(IO0CLR, SDA); } +#define I2C_SCL(x) { if (x) PUT32(IO0SET, SCL); else PUT32(IO0CLR, SCL); } +#define I2C_DELAY { udelay(100); } +#define I2C_ACTIVE { unsigned int i2ctmp; \ + i2ctmp = GET32(IO0DIR); \ + i2ctmp |= SDA; \ + PUT32(IO0DIR, i2ctmp); } +#define I2C_TRISTATE { unsigned int i2ctmp; \ + i2ctmp = GET32(IO0DIR); \ + i2ctmp &= ~SDA; \ + PUT32(IO0DIR, i2ctmp); } +#endif /* CONFIG_SOFT_I2C */ + +/* + * Supported commands + */ +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_DHCP | \ + CFG_CMD_FAT | \ + CFG_CMD_MMC | \ + CFG_CMD_NET | \ + CFG_CMD_EEPROM | \ + CFG_CMD_PING) + +#define CONFIG_DOS_PARTITION + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +#define CONFIG_BOOTDELAY 5 + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "SMN42 # " /* Monitor Command Prompt */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x81800000 /* memtest works on */ +#define CFG_MEMTEST_END 0x83000000 /* 24 MB in SRAM */ + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CFG_LOAD_ADDR 0x81000000 /* default load address */ + /* for uClinux img is here*/ + +#define CFG_SYS_CLK_FREQ 58982400 /* Hz */ +#define CFG_HZ 2048 /* decrementer freq in Hz */ + + /* valid baudrates */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ +#endif + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of SRAM */ +#define PHYS_SDRAM_1 0x81000000 /* SRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB SRAM */ + +/* This is the external flash */ +#define PHYS_FLASH_1 0x80000000 /* Flash Bank #1 */ +#define PHYS_FLASH_SIZE 0x01000000 /* 16 MB */ + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ + +/* + * The first entry in CFG_FLASH_BANKS_LIST is a dummy, but it must be present. + */ +#define CFG_FLASH_BANKS_LIST { 0, PHYS_FLASH_1 } +#define CFG_FLASH_ADDR0 0x555 +#define CFG_FLASH_ADDR1 0x2AA +#define CFG_FLASH_ERASE_TOUT 16384 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 5 /* Timeout for Flash Write (in ms) */ + +#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ + +#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ + +#define CFG_ENV_IS_IN_FLASH 1 +/* The Environment Sector is in the CPU-internal flash */ +#define CFG_FLASH_BASE 0 +#define CFG_ENV_OFFSET 0x3C000 +#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_ENV_OFFSET) +#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ + +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define CONFIG_MMC 1 +/* we use this ethernet chip */ +#define CONFIG_ENC28J60 + +#endif /* __CONFIG_H */ diff --git a/include/configs/TB5200.h b/include/configs/TB5200.h index b42cfb6e1f..712668ab8a 100644 --- a/include/configs/TB5200.h +++ b/include/configs/TB5200.h @@ -207,7 +207,7 @@ * PCI Bus clocking configuration * * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if - * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock + * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock * of 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz. */ #define CFG_PCICLK_EQUALS_IPBCLK_DIV2 /* define for 66MHz speed */ diff --git a/include/configs/acadia.h b/include/configs/acadia.h index c72d9339e6..0f447b004a 100644 --- a/include/configs/acadia.h +++ b/include/configs/acadia.h @@ -109,6 +109,7 @@ /*----------------------------------------------------------------------- * FLASH related *----------------------------------------------------------------------*/ +#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) #define CFG_FLASH_CFI /* The flash is CFI compatible */ #define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ @@ -122,6 +123,12 @@ #define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ #define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ +#define _CFG_CMD_INCLUDE (CFG_CMD_ALL) +#else +#define CFG_NO_FLASH 1 /* No NOR on Acadia when NAND-booting */ +#define _CFG_CMD_INCLUDE ((CFG_CMD_ALL) & ~(CFG_CMD_FLASH | CFG_CMD_IMLS)) +#endif + #ifdef CFG_ENV_IS_IN_FLASH #define CFG_ENV_SECT_SIZE 0x40000 /* size of one complete sector */ #define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE) @@ -132,6 +139,63 @@ #define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) #endif +/* + * IPL (Initial Program Loader, integrated inside CPU) + * Will load first 4k from NAND (SPL) into cache and execute it from there. + * + * SPL (Secondary Program Loader) + * Will load special U-Boot version (NUB) from NAND and execute it. This SPL + * has to fit into 4kByte. It sets up the CPU and configures the SDRAM + * controller and the NAND controller so that the special U-Boot image can be + * loaded from NAND to SDRAM. + * + * NUB (NAND U-Boot) + * This NAND U-Boot (NUB) is a special U-Boot version which can be started + * from RAM. Therefore it mustn't (re-)configure the SDRAM controller. + * + * On 440EPx the SPL is copied to SDRAM before the NAND controller is + * set up. While still running from cache, I experienced problems accessing + * the NAND controller. sr - 2006-08-25 + */ +#define CFG_NAND_BOOT_SPL_SRC 0xfffff000 /* SPL location */ +#define CFG_NAND_BOOT_SPL_SIZE (4 << 10) /* SPL size */ +#define CFG_NAND_BOOT_SPL_DST (CFG_OCM_DATA_ADDR + (12 << 10)) /* Copy SPL here*/ +#define CFG_NAND_U_BOOT_DST 0x01000000 /* Load NUB to this addr */ +#define CFG_NAND_U_BOOT_START CFG_NAND_U_BOOT_DST /* Start NUB from this addr */ +#define CFG_NAND_BOOT_SPL_DELTA (CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST) + +/* + * Define the partitioning of the NAND chip (only RAM U-Boot is needed here) + */ +#define CFG_NAND_U_BOOT_OFFS (16 << 10) /* Offset to RAM U-Boot image */ +#define CFG_NAND_U_BOOT_SIZE (384 << 10) /* Size of RAM U-Boot image */ + +/* + * Now the NAND chip has to be defined (no autodetection used!) + */ +#define CFG_NAND_PAGE_SIZE 512 /* NAND chip page size */ +#define CFG_NAND_BLOCK_SIZE (16 << 10) /* NAND chip block size */ +#define CFG_NAND_PAGE_COUNT 32 /* NAND chip page count */ +#define CFG_NAND_BAD_BLOCK_POS 5 /* Location of bad block marker */ +#undef CFG_NAND_4_ADDR_CYCLE /* No fourth addr used (<=32MB) */ + +#define CFG_NAND_ECCSIZE 256 +#define CFG_NAND_ECCBYTES 3 +#define CFG_NAND_ECCSTEPS (CFG_NAND_PAGE_SIZE / CFG_NAND_ECCSIZE) +#define CFG_NAND_OOBSIZE 16 +#define CFG_NAND_ECCTOTAL (CFG_NAND_ECCBYTES * CFG_NAND_ECCSTEPS) +#define CFG_NAND_ECCPOS {0, 1, 2, 3, 6, 7} + +#ifdef CFG_ENV_IS_IN_NAND +/* + * For NAND booting the environment is embedded in the U-Boot image. Please take + * look at the file board/amcc/sequoia/u-boot-nand.lds for details. + */ +#define CFG_ENV_SIZE CFG_NAND_BLOCK_SIZE +#define CFG_ENV_OFFSET (CFG_NAND_U_BOOT_OFFS + CFG_ENV_SIZE) +#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET + CFG_ENV_SIZE) +#endif + /*----------------------------------------------------------------------- * RAM (CRAM) *----------------------------------------------------------------------*/ @@ -209,7 +273,11 @@ "update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;" \ "cp.b ${fileaddr} fffc0000 ${filesize};" \ "setenv filesize;saveenv\0" \ - "upd=run load;run update\0" \ + "upd=run load update\0" \ + "nload=tftp 200000 acadia/u-boot-nand.bin\0" \ + "nupdate=nand erase 0 60000;nand write 200000 0 60000;" \ + "setenv filesize;saveenv\0" \ + "nupd=run nload nupdate\0" \ "kozio=bootm ffc60000\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_self" @@ -233,24 +301,24 @@ #define CONFIG_SUPPORT_VFAT -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_ASKENV | \ - CFG_CMD_DHCP | \ - CFG_CMD_DTT | \ - CFG_CMD_DIAG | \ - CFG_CMD_EEPROM | \ - CFG_CMD_ELF | \ - CFG_CMD_FAT | \ - CFG_CMD_I2C | \ - CFG_CMD_IRQ | \ - CFG_CMD_MII | \ - CFG_CMD_NAND | \ - CFG_CMD_NET | \ - CFG_CMD_NFS | \ - CFG_CMD_PCI | \ - CFG_CMD_PING | \ - CFG_CMD_REGINFO | \ - CFG_CMD_USB) +#define CONFIG_COMMANDS ((CONFIG_CMD_DFL & _CFG_CMD_INCLUDE) | \ + CFG_CMD_ASKENV | \ + CFG_CMD_DHCP | \ + CFG_CMD_DTT | \ + CFG_CMD_DIAG | \ + CFG_CMD_EEPROM | \ + CFG_CMD_ELF | \ + CFG_CMD_FAT | \ + CFG_CMD_I2C | \ + CFG_CMD_IRQ | \ + CFG_CMD_MII | \ + CFG_CMD_NAND | \ + CFG_CMD_NET | \ + CFG_CMD_NFS | \ + CFG_CMD_PCI | \ + CFG_CMD_PING | \ + CFG_CMD_REGINFO | \ + CFG_CMD_USB) /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> @@ -312,12 +380,16 @@ /*----------------------------------------------------------------------- * External Bus Controller (EBC) Setup *----------------------------------------------------------------------*/ -#define CFG_NAND_CS 3 /* NAND chip connected to CSx */ - +#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) +#define CFG_NAND_CS 3 /* Memory Bank 0 (Flash) initialization */ #define CFG_EBC_PB0AP 0x03337200 #define CFG_EBC_PB0CR 0xfe0bc000 +/* Memory Bank 3 (NAND-FLASH) initialization */ +#define CFG_EBC_PB3AP 0x018003c0 +#define CFG_EBC_PB3CR (CFG_NAND_ADDR | 0x1c000) + /* Just initial configuration for CRAM. Will be changed in memory.c to sync mode*/ /* Memory Bank 1 (CRAM) initialization */ #define CFG_EBC_PB1AP 0x030400c0 @@ -326,10 +398,24 @@ /* Memory Bank 2 (CRAM) initialization */ #define CFG_EBC_PB2AP 0x030400c0 #define CFG_EBC_PB2CR 0x020bc000 +#else +#define CFG_NAND_CS 0 /* NAND chip connected to CSx */ +/* Memory Bank 0 (NAND-FLASH) initialization */ +#define CFG_EBC_PB0AP 0x018003c0 +#define CFG_EBC_PB0CR (CFG_NAND_ADDR | 0x1c000) -/* Memory Bank 3 (NAND-FLASH) initialization */ -#define CFG_EBC_PB3AP 0x018003c0 -#define CFG_EBC_PB3CR (CFG_NAND_ADDR | 0x1c000) +/* + * When NAND-booting the CRAM EBC setup must be done in sync mode, since the + * NAND-SPL already initialized the CRAM and EBC to sync mode. + */ +/* Memory Bank 1 (CRAM) initialization */ +#define CFG_EBC_PB1AP 0x9C0201C0 +#define CFG_EBC_PB1CR 0x000bc000 + +/* Memory Bank 2 (CRAM) initialization */ +#define CFG_EBC_PB2AP 0x9C0201C0 +#define CFG_EBC_PB2CR 0x020bc000 +#endif /* Memory Bank 4 (CPLD) initialization */ #define CFG_EBC_PB4AP 0x04006000 @@ -341,9 +427,9 @@ * GPIO Setup *----------------------------------------------------------------------*/ #define CFG_GPIO_CRAM_CLK 8 -#define CFG_GPIO_CRAM_WAIT 9 +#define CFG_GPIO_CRAM_WAIT 9 /* GPIO-In */ #define CFG_GPIO_CRAM_ADV 10 -#define CFG_GPIO_CRAM_CRE (32 + 21) +#define CFG_GPIO_CRAM_CRE (32 + 21) /* GPIO-Out */ /*----------------------------------------------------------------------- * Definitions for GPIO_0 setup (PPC405EZ specific) @@ -365,10 +451,10 @@ * GPIO0[28-30] - Trace Outputs / PWM Inputs * GPIO0[31] - PWM_8 I/O */ -#define CFG_GPIO0_TCR 0xC0000000 -#define CFG_GPIO0_OSRL 0x50000000 +#define CFG_GPIO0_TCR 0xC0A00000 +#define CFG_GPIO0_OSRL 0x50004400 #define CFG_GPIO0_OSRH 0x02000055 -#define CFG_GPIO0_ISR1L 0x00000000 +#define CFG_GPIO0_ISR1L 0x00001000 #define CFG_GPIO0_ISR1H 0x00000055 #define CFG_GPIO0_TSRL 0x02000000 #define CFG_GPIO0_TSRH 0x00000055 @@ -387,13 +473,13 @@ * GPIO1[16] - SPI_SS_1_N Output * GPIO1[17-20] - Trace Output/External Interrupts IRQ0 - IRQ3 inputs */ -#define CFG_GPIO1_OSRH 0x55455555 +#define CFG_GPIO1_TCR 0xFFFF8414 #define CFG_GPIO1_OSRL 0x40000110 -#define CFG_GPIO1_ISR1H 0x00000000 +#define CFG_GPIO1_OSRH 0x55455555 #define CFG_GPIO1_ISR1L 0x15555445 -#define CFG_GPIO1_TSRH 0x00000000 +#define CFG_GPIO1_ISR1H 0x00000000 #define CFG_GPIO1_TSRL 0x00000000 -#define CFG_GPIO1_TCR 0xFFFF8014 +#define CFG_GPIO1_TSRH 0x00000000 /* * Internal Definitions diff --git a/include/configs/aev.h b/include/configs/aev.h index 6c2a360378..f6f530cedb 100644 --- a/include/configs/aev.h +++ b/include/configs/aev.h @@ -173,7 +173,7 @@ * PCI Bus clocking configuration * * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if - * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock + * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock * of 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz. */ #define CFG_PCICLK_EQUALS_IPBCLK_DIV2 /* define for 66MHz speed */ diff --git a/include/configs/bamboo.h b/include/configs/bamboo.h index db58a9fa74..763d1c7a8b 100644 --- a/include/configs/bamboo.h +++ b/include/configs/bamboo.h @@ -50,7 +50,7 @@ *----------------------------------------------------------------------*/ #define CFG_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Monitor */ #define CFG_MALLOC_LEN (256 * 1024) /* Reserve 256 kB for malloc() */ -#define CFG_MONITOR_BASE (-CFG_MONITOR_LEN) +#define CFG_MONITOR_BASE TEXT_BASE #define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */ #define CFG_FLASH_BASE 0xfff00000 /* start of FLASH */ #define CFG_PCI_MEMBASE 0xa0000000 /* mapped pci memory*/ @@ -104,14 +104,11 @@ /*----------------------------------------------------------------------- * Environment *----------------------------------------------------------------------*/ -/* - * Define here the location of the environment variables (FLASH or EEPROM). - * Note: DENX encourages to use redundant environment in FLASH. - */ -#if 1 +#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) #define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ #else -#define CFG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */ +#define CFG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */ +#define CFG_ENV_IS_EMBEDDED 1 /* use embedded environment */ #endif /*----------------------------------------------------------------------- @@ -133,7 +130,7 @@ #ifdef CFG_ENV_IS_IN_FLASH #define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ -#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE) +#define CFG_ENV_ADDR ((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE) #define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ /* Address and size of Redundant Environment Sector */ @@ -141,22 +138,89 @@ #define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) #endif /* CFG_ENV_IS_IN_FLASH */ +/* + * IPL (Initial Program Loader, integrated inside CPU) + * Will load first 4k from NAND (SPL) into cache and execute it from there. + * + * SPL (Secondary Program Loader) + * Will load special U-Boot version (NUB) from NAND and execute it. This SPL + * has to fit into 4kByte. It sets up the CPU and configures the SDRAM + * controller and the NAND controller so that the special U-Boot image can be + * loaded from NAND to SDRAM. + * + * NUB (NAND U-Boot) + * This NAND U-Boot (NUB) is a special U-Boot version which can be started + * from RAM. Therefore it mustn't (re-)configure the SDRAM controller. + * + * On 440EPx the SPL is copied to SDRAM before the NAND controller is + * set up. While still running from cache, I experienced problems accessing + * the NAND controller. sr - 2006-08-25 + */ +#define CFG_NAND_BOOT_SPL_SRC 0xfffff000 /* SPL location */ +#define CFG_NAND_BOOT_SPL_SIZE (4 << 10) /* SPL size */ +#define CFG_NAND_BOOT_SPL_DST 0x00800000 /* Copy SPL here */ +#define CFG_NAND_U_BOOT_DST 0x01000000 /* Load NUB to this addr */ +#define CFG_NAND_U_BOOT_START CFG_NAND_U_BOOT_DST /* Start NUB from this addr */ +#define CFG_NAND_BOOT_SPL_DELTA (CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST) + +/* + * Define the partitioning of the NAND chip (only RAM U-Boot is needed here) + */ +#define CFG_NAND_U_BOOT_OFFS (16 << 10) /* Offset to RAM U-Boot image */ +#define CFG_NAND_U_BOOT_SIZE (384 << 10) /* Size of RAM U-Boot image */ + +/* + * Now the NAND chip has to be defined (no autodetection used!) + */ +#define CFG_NAND_PAGE_SIZE 512 /* NAND chip page size */ +#define CFG_NAND_BLOCK_SIZE (16 << 10) /* NAND chip block size */ +#define CFG_NAND_PAGE_COUNT 32 /* NAND chip page count */ +#define CFG_NAND_BAD_BLOCK_POS 5 /* Location of bad block marker */ +#define CFG_NAND_4_ADDR_CYCLE 1 /* Fourth addr used (>32MB) */ + +#define CFG_NAND_ECCSIZE 256 +#define CFG_NAND_ECCBYTES 3 +#define CFG_NAND_ECCSTEPS (CFG_NAND_PAGE_SIZE / CFG_NAND_ECCSIZE) +#define CFG_NAND_OOBSIZE 16 +#define CFG_NAND_ECCTOTAL (CFG_NAND_ECCBYTES * CFG_NAND_ECCSTEPS) +#define CFG_NAND_ECCPOS {0, 1, 2, 3, 6, 7} + +#ifdef CFG_ENV_IS_IN_NAND +/* + * For NAND booting the environment is embedded in the U-Boot image. Please take + * look at the file board/amcc/sequoia/u-boot-nand.lds for details. + */ +#define CFG_ENV_SIZE CFG_NAND_BLOCK_SIZE +#define CFG_ENV_OFFSET (CFG_NAND_U_BOOT_OFFS + CFG_ENV_SIZE) +#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET + CFG_ENV_SIZE) +#endif + /*----------------------------------------------------------------------- * NAND FLASH *----------------------------------------------------------------------*/ -#define CFG_MAX_NAND_DEVICE 1 -#define NAND_MAX_CHIPS 1 -#define CFG_NAND_CS 1 +#define CFG_MAX_NAND_DEVICE 2 +#define NAND_MAX_CHIPS CFG_MAX_NAND_DEVICE #define CFG_NAND_BASE (CFG_NAND_ADDR + CFG_NAND_CS) +#define CFG_NAND_BASE_LIST { CFG_NAND_BASE, CFG_NAND_ADDR + 2 } #define CFG_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl. chips */ +#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) +#define CFG_NAND_CS 1 +#else +#define CFG_NAND_CS 0 /* NAND chip connected to CSx */ +/* Memory Bank 0 (NAND-FLASH) initialization */ +#define CFG_EBC_PB0AP 0x018003c0 +#define CFG_EBC_PB0CR (CFG_NAND_ADDR | 0x1c000) +#endif + /*----------------------------------------------------------------------- * DDR SDRAM *----------------------------------------------------------------------------- */ #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for setup */ #undef CONFIG_DDR_ECC /* don't use ECC */ #define CFG_SIMULATE_SPD_EEPROM 0xff /* simulate spd eeprom on this address */ -#define SPD_EEPROM_ADDRESS {CFG_SIMULATE_SPD_EEPROM, 0x50, 0x51} +#define SPD_EEPROM_ADDRESS {CFG_SIMULATE_SPD_EEPROM, 0x50, 0x51} +#define CFG_MBYTES_SDRAM (64) /* 64MB fixed size for early-sdram-init */ /*----------------------------------------------------------------------- * I2C diff --git a/include/configs/lpc2292sodimm.h b/include/configs/lpc2292sodimm.h index 7e515230a3..7b6c6953e1 100644..100755 --- a/include/configs/lpc2292sodimm.h +++ b/include/configs/lpc2292sodimm.h @@ -1,12 +1,8 @@ /* - * (C) Copyright 2000 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> + * (C) Copyright 2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * - * Configuation settings for the EP7312 board. - * - * Modified to work on Armadillo HT1070 ARM720T board - * (C) Copyright 2005 Rowel Atienza rowel@diwalabs.com + * Configuation settings for the LPC2292SODIMM board from Embedded Artists. * * See file CREDITS for list of people who contributed to this * project. @@ -31,7 +27,7 @@ #define __CONFIG_H /* - * If we are developing, we might want to start armboot from ram + * If we are developing, we might want to start u-boot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ #undef CONFIG_INIT_CRITICAL /* undef for developing */ @@ -46,7 +42,7 @@ #define CONFIG_ARM7 1 /* This is a ARM7 CPU */ #define CONFIG_ARM_THUMB 1 /* this is an ARM720TDMI */ #define CONFIG_LPC2292 -#undef CONFIG_ARM7_REVD /* disable ARM720 REV.D Workarounds */ +#undef CONFIG_ARM7_REVD /* disable ARM720 REV.D Workarounds */ #undef CONFIG_USE_IRQ /* don't need them anymore */ @@ -70,7 +66,7 @@ #define CONFIG_BAUDRATE 115200 -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE) +#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE) /* * Supported commands @@ -103,11 +99,12 @@ #define CFG_MEMTEST_START 0x40000000 /* memtest works on */ #define CFG_MEMTEST_END 0x40000000 /* 4 ... 8 MB in DRAM */ -#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ -#define CFG_LOAD_ADDR 0x00040000 /* default load address for armadillo: kernel img is here*/ +#define CFG_LOAD_ADDR 0x00040000 /* default load address for */ + /* armadillo: kernel img is here*/ -#define CFG_SYS_CLK_FREQ 58982400 /* Hz */ +#define CFG_SYS_CLK_FREQ 58982400 /* Hz */ #define CFG_HZ 2048 /* decrementer freq in Hz */ /* valid baudrates */ @@ -154,5 +151,7 @@ #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG #define CONFIG_MMC 1 +/* we use this ethernet chip */ +#define CONFIG_ENC28J60 #endif /* __CONFIG_H */ diff --git a/include/configs/luan.h b/include/configs/luan.h index 9c8769b200..045a144aad 100644 --- a/include/configs/luan.h +++ b/include/configs/luan.h @@ -135,7 +135,8 @@ *----------------------------------------------------------------------*/ #define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */ #define SPD_EEPROM_ADDRESS {0x53, 0x52} /* SPD i2c spd addresses*/ -#undef CONFIG_DDR_ECC /* no ECC support for now */ +#define CONFIG_DDR_ECC 1 /* with ECC support */ +#define CFG_44x_DDR2_CKTR_180 1 /* use 180 deg advance */ /*----------------------------------------------------------------------- * I2C diff --git a/include/configs/sc3.h b/include/configs/sc3.h index 6b6acfa875..e4357b0885 100644 --- a/include/configs/sc3.h +++ b/include/configs/sc3.h @@ -58,7 +58,7 @@ * 0xFFE00000 .... 0xFFFFFFFF -> BOOT-ROM (2 MiB) */ -#define CONFIG_SOLIDCARD3 1 +#define CONFIG_SC3 1 #define CONFIG_4xx 1 #define CONFIG_405GP 1 @@ -134,7 +134,8 @@ #if 1 /* feel free to disable for development */ #define CONFIG_AUTOBOOT_KEYED /* Enable password protection */ #define CONFIG_AUTOBOOT_PROMPT "\nSC3 - booting... stop with ENTER\n" -#define CONFIG_AUTOBOOT_DELAY_STR "\n" /* 1st "password" */ +#define CONFIG_AUTOBOOT_DELAY_STR "\r" /* 1st "password" */ +#define CONFIG_AUTOBOOT_DELAY_STR2 "\n" /* 1st "password" */ #endif /* diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h index e1572ba39c..23243a4971 100644 --- a/include/configs/sequoia.h +++ b/include/configs/sequoia.h @@ -168,12 +168,19 @@ /* * Now the NAND chip has to be defined (no autodetection used!) */ -#define CFG_NAND_PAGE_SIZE (512) /* NAND chip page size */ +#define CFG_NAND_PAGE_SIZE 512 /* NAND chip page size */ #define CFG_NAND_BLOCK_SIZE (16 << 10) /* NAND chip block size */ -#define CFG_NAND_PAGE_COUNT (32) /* NAND chip page count */ -#define CFG_NAND_BAD_BLOCK_POS (5) /* Location of bad block marker */ +#define CFG_NAND_PAGE_COUNT 32 /* NAND chip page count */ +#define CFG_NAND_BAD_BLOCK_POS 5 /* Location of bad block marker */ #undef CFG_NAND_4_ADDR_CYCLE /* No fourth addr used (<=32MB) */ +#define CFG_NAND_ECCSIZE 256 +#define CFG_NAND_ECCBYTES 3 +#define CFG_NAND_ECCSTEPS (CFG_NAND_PAGE_SIZE / CFG_NAND_ECCSIZE) +#define CFG_NAND_OOBSIZE 16 +#define CFG_NAND_ECCTOTAL (CFG_NAND_ECCBYTES * CFG_NAND_ECCSTEPS) +#define CFG_NAND_ECCPOS {0, 1, 2, 3, 6, 7} + #ifdef CFG_ENV_IS_IN_NAND /* * For NAND booting the environment is embedded in the U-Boot image. Please take diff --git a/include/configs/spieval.h b/include/configs/spieval.h index fd138a5d17..9888d11108 100644 --- a/include/configs/spieval.h +++ b/include/configs/spieval.h @@ -226,7 +226,7 @@ * PCI Bus clocking configuration * * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if - * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock + * CFG_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock * of 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz. */ #define CFG_PCICLK_EQUALS_IPBCLK_DIV2 /* define for 66MHz speed */ diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h index 8624f4b74b..1978a32bb1 100644 --- a/include/configs/stxssa.h +++ b/include/configs/stxssa.h @@ -80,16 +80,20 @@ * This address, however, is used to configure a 256M local bus * window that includes the Config latch below. */ -#define CFG_LBC_OPTION_BASE 0xf0000000 /* Localbus Extension */ +#define CFG_LBC_OPTION_BASE 0xF0000000 /* Localbus Extension */ #define CFG_LBC_OPTION_SIZE 256 /* 256MB */ /* There are various flash options used, we configure for the largest, * which is 64Mbytes. The CFI works fine and will discover the proper * sizes. */ -#define CFG_FLASH_BASE 0xFC000000 /* start of FLASH 64M */ -#define CFG_BR0_PRELIM 0xFC001801 /* port size 32bit */ -#define CFG_OR0_PRELIM 0xFC000FF7 /* 64 MB Flash */ +#ifdef CONFIG_STXSSA_4M +#define CFG_FLASH_BASE 0xFFC00000 /* start of 4 MiB flash */ +#else +#define CFG_FLASH_BASE 0xFC000000 /* start of 64 MiB flash */ +#endif +#define CFG_BR0_PRELIM (CFG_FLASH_BASE | 0x1801) /* port size 32bit */ +#define CFG_OR0_PRELIM (CFG_FLASH_BASE | 0x0FF7) #define CFG_FLASH_CFI 1 #define CFG_FLASH_CFI_DRIVER 1 @@ -104,9 +108,9 @@ /* The configuration latch is Chip Select 1. * It's an 8-bit latch in the lower 8 bits of the word. */ -#define CFG_LBC_CFGLATCH_BASE 0xfb000000 /* Base of config latch */ -#define CFG_BR1_PRELIM 0xfb001801 /* 32-bit port */ -#define CFG_OR1_PRELIM 0xffff0ff7 /* 64K is enough */ +#define CFG_LBC_CFGLATCH_BASE 0xFB000000 /* Base of config latch */ +#define CFG_BR1_PRELIM 0xFB001801 /* 32-bit port */ +#define CFG_OR1_PRELIM 0xFFFF0FF7 /* 64K is enough */ #define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ @@ -300,17 +304,20 @@ /* Environment - default config is in flash, see below */ #if 0 /* in EEPROM */ -#define CFG_ENV_IS_IN_EEPROM 1 -#define CFG_ENV_OFFSET 0 -#define CFG_ENV_SIZE 2048 +# define CFG_ENV_IS_IN_EEPROM 1 +# define CFG_ENV_OFFSET 0 +# define CFG_ENV_SIZE 2048 #else /* in flash */ -#define CFG_ENV_IS_IN_FLASH 1 -#define CFG_ENV_SECT_SIZE 0x40000 - -#define CFG_ENV_ADDR (CFG_MONITOR_BASE - CFG_ENV_SECT_SIZE) -#define CFG_ENV_SIZE 0x4000 -#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR - CFG_ENV_SECT_SIZE) -#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) +# define CFG_ENV_IS_IN_FLASH 1 +# ifdef CONFIG_STXSSA_4M +# define CFG_ENV_SECT_SIZE 0x20000 +# else /* default configuration - 64 MiB flash */ +# define CFG_ENV_SECT_SIZE 0x40000 +# endif +# define CFG_ENV_ADDR (CFG_MONITOR_BASE - CFG_ENV_SECT_SIZE) +# define CFG_ENV_SIZE 0x4000 +# define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR - CFG_ENV_SECT_SIZE) +# define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) #endif #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ diff --git a/include/ppc405.h b/include/ppc405.h index fffae4dd16..71ad12e515 100644 --- a/include/ppc405.h +++ b/include/ppc405.h @@ -556,6 +556,11 @@ #define sdricintstat 0x4510 #define SDR_NAND0_NDEN 0x80000000 +#define SDR_NAND0_NDBTEN 0x40000000 +#define SDR_NAND0_NDBADR_MASK 0x30000000 +#define SDR_NAND0_NDBPG_MASK 0x0f000000 +#define SDR_NAND0_NDAREN 0x00800000 +#define SDR_NAND0_NDRBEN 0x00400000 #define SDR_ULTRA0_NDGPIOBP 0x80000000 #define SDR_ULTRA0_CSN_MASK 0x78000000 @@ -563,6 +568,9 @@ #define SDR_ULTRA0_CSNSEL1 0x20000000 #define SDR_ULTRA0_CSNSEL2 0x10000000 #define SDR_ULTRA0_CSNSEL3 0x08000000 +#define SDR_ULTRA0_EBCRDYEN 0x04000000 +#define SDR_ULTRA0_SPISSINEN 0x02000000 +#define SDR_ULTRA0_NFSRSTEN 0x01000000 #define SDR_ULTRA1_LEDNENABLE 0x40000000 diff --git a/lib_ppc/board.c b/lib_ppc/board.c index 9e85cdddc4..c4fc5805ab 100644 --- a/lib_ppc/board.c +++ b/lib_ppc/board.c @@ -76,7 +76,7 @@ extern int update_flash_size (int flash_size); #endif -#if defined(CONFIG_SOLIDCARD3) +#if defined(CONFIG_SC3) extern void sc3_read_eeprom(void); #endif @@ -820,7 +820,7 @@ void board_init_r (gd_t *id, ulong dest_addr) #endif /* CONFIG_405GP, CONFIG_405EP */ #endif /* CFG_EXTBDINFO */ -#if defined(CONFIG_SOLIDCARD3) +#if defined(CONFIG_SC3) sc3_read_eeprom(); #endif s = getenv ("ethaddr"); @@ -929,7 +929,7 @@ void board_init_r (gd_t *id, ulong dest_addr) defined(CONFIG_KUP4X) || \ defined(CONFIG_LWMON) || \ defined(CONFIG_PCU_E) || \ - defined(CONFIG_SOLIDCARD3) || \ + defined(CONFIG_SC3) || \ defined(CONFIG_W7O) || \ defined(CONFIG_MISC_INIT_R) /* miscellaneous platform dependent initialisations */ diff --git a/nand_spl/board/amcc/acadia/Makefile b/nand_spl/board/amcc/acadia/Makefile new file mode 100644 index 0000000000..0d6828a76f --- /dev/null +++ b/nand_spl/board/amcc/acadia/Makefile @@ -0,0 +1,104 @@ +# +# (C) Copyright 2007 +# Stefan Roese, DENX Software Engineering, sr@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk +include $(TOPDIR)/nand_spl/board/$(BOARDDIR)/config.mk + +LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds +LDFLAGS = -Bstatic -T $(LDSCRIPT) -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS) +AFLAGS += -DCONFIG_NAND_SPL +CFLAGS += -DCONFIG_NAND_SPL + +SOBJS = start.o resetvec.o +COBJS = gpio.o nand_boot.o nand_ecc.o memory.o ndfc.o + +SRCS := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c)) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) +__OBJS := $(SOBJS) $(COBJS) +LNDIR := $(OBJTREE)/nand_spl/board/$(BOARDDIR) + +nandobj := $(OBJTREE)/nand_spl/ + +ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin + +all: $(obj).depend $(ALL) + +$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl + $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@ + +$(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl + $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ + +$(nandobj)u-boot-spl: $(OBJS) + cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \ + -Map $(nandobj)u-boot-spl.map \ + -o $(nandobj)u-boot-spl + +# create symbolic links for common files + +# from cpu directory +$(obj)gpio.c: + @rm -f $(obj)gpio.c + ln -s $(SRCTREE)/cpu/ppc4xx/gpio.c $(obj)gpio.c + +$(obj)ndfc.c: + @rm -f $(obj)ndfc.c + ln -s $(SRCTREE)/cpu/ppc4xx/ndfc.c $(obj)ndfc.c + +$(obj)resetvec.S: + @rm -f $(obj)resetvec.S + ln -s $(SRCTREE)/cpu/ppc4xx/resetvec.S $(obj)resetvec.S + +$(obj)start.S: + @rm -f $(obj)start.S + ln -s $(SRCTREE)/cpu/ppc4xx/start.S $(obj)start.S + +# from board directory +$(obj)memory.c: + @rm -f $(obj)memory.c + ln -s $(SRCTREE)/board/amcc/acadia/memory.c $(obj)memory.c + +# from nand_spl directory +$(obj)nand_boot.c: + @rm -f $(obj)nand_boot.c + ln -s $(SRCTREE)/nand_spl/nand_boot.c $(obj)nand_boot.c + +# from drivers/nand directory +$(obj)nand_ecc.c: + @rm -f $(obj)nand_ecc.c + ln -s $(SRCTREE)/drivers/nand/nand_ecc.c $(obj)nand_ecc.c + +######################################################################### + +$(obj)%.o: $(obj)%.S + $(CC) $(AFLAGS) -c -o $@ $< + +$(obj)%.o: $(obj)%.c + $(CC) $(CFLAGS) -c -o $@ $< + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/nand_spl/board/amcc/acadia/config.mk b/nand_spl/board/amcc/acadia/config.mk new file mode 100644 index 0000000000..55069b4dfe --- /dev/null +++ b/nand_spl/board/amcc/acadia/config.mk @@ -0,0 +1,47 @@ +# +# (C) Copyright 2007 +# Stefan Roese, DENX Software Engineering, sr@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +# +# AMCC 405EZ Reference Platform (Acadia) board +# + +# +# TEXT_BASE for SPL: +# +# On 4xx platforms the SPL is located at 0xfffff000...0xffffffff, +# in the last 4kBytes of memory space in cache. +# We will copy this SPL into internal SRAM in start.S. So we set +# TEXT_BASE to starting address in internal SRAM here. +# +TEXT_BASE = 0xF8003000 + +# PAD_TO used to generate a 16kByte binary needed for the combined image +# -> PAD_TO = TEXT_BASE + 0x4000 +PAD_TO = 0xF8007000 + +ifeq ($(debug),1) +PLATFORM_CPPFLAGS += -DDEBUG +endif + +ifeq ($(dbcr),1) +PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000 +endif diff --git a/nand_spl/board/amcc/acadia/u-boot.lds b/nand_spl/board/amcc/acadia/u-boot.lds new file mode 100644 index 0000000000..018def1fab --- /dev/null +++ b/nand_spl/board/amcc/acadia/u-boot.lds @@ -0,0 +1,63 @@ +/* + * (C) Copyright 2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc:common) +SECTIONS +{ + .resetvec 0xF8003FFC : + { + *(.resetvec) + } = 0xffff + + .text : + { + start.o (.text) + nand_boot.o (.text) + ndfc.o (.text) + + *(.text) + *(.fixup) + } + _etext = .; + + .data : + { + *(.rodata*) + *(.data*) + *(.sdata*) + __got2_start = .; + *(.got2) + __got2_end = .; + } + + _edata = .; + + __bss_start = .; + .bss : + { + *(.sbss) + *(.bss) + } + + _end = . ; +} diff --git a/nand_spl/board/amcc/bamboo/Makefile b/nand_spl/board/amcc/bamboo/Makefile new file mode 100644 index 0000000000..0df86f99d4 --- /dev/null +++ b/nand_spl/board/amcc/bamboo/Makefile @@ -0,0 +1,100 @@ +# +# (C) Copyright 2007 +# Stefan Roese, DENX Software Engineering, sr@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk +include $(TOPDIR)/nand_spl/board/$(BOARDDIR)/config.mk + +LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds +LDFLAGS = -Bstatic -T $(LDSCRIPT) -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS) +AFLAGS += -DCONFIG_NAND_SPL +CFLAGS += -DCONFIG_NAND_SPL + +SOBJS = start.o init.o resetvec.o +COBJS = nand_boot.o nand_ecc.o ndfc.o sdram.o + +SRCS := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c)) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) +__OBJS := $(SOBJS) $(COBJS) +LNDIR := $(OBJTREE)/nand_spl/board/$(BOARDDIR) + +nandobj := $(OBJTREE)/nand_spl/ + +ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin + +all: $(obj).depend $(ALL) + +$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl + $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@ + +$(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl + $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ + +$(nandobj)u-boot-spl: $(OBJS) + cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \ + -Map $(nandobj)u-boot-spl.map \ + -o $(nandobj)u-boot-spl + +# create symbolic links for common files + +# from cpu directory +$(obj)ndfc.c: + @rm -f $(obj)ndfc.c + ln -s $(SRCTREE)/cpu/ppc4xx/ndfc.c $(obj)ndfc.c + +$(obj)resetvec.S: + @rm -f $(obj)resetvec.S + ln -s $(SRCTREE)/cpu/ppc4xx/resetvec.S $(obj)resetvec.S + +$(obj)start.S: + @rm -f $(obj)start.S + ln -s $(SRCTREE)/cpu/ppc4xx/start.S $(obj)start.S + +# from board directory +$(obj)init.S: + @rm -f $(obj)init.S + ln -s $(SRCTREE)/board/amcc/bamboo/init.S $(obj)init.S + +# from nand_spl directory +$(obj)nand_boot.c: + @rm -f $(obj)nand_boot.c + ln -s $(SRCTREE)/nand_spl/nand_boot.c $(obj)nand_boot.c + +# from drivers/nand directory +$(obj)nand_ecc.c: + @rm -f $(obj)nand_ecc.c + ln -s $(SRCTREE)/drivers/nand/nand_ecc.c $(obj)nand_ecc.c + +######################################################################### + +$(obj)%.o: $(obj)%.S + $(CC) $(AFLAGS) -c -o $@ $< + +$(obj)%.o: $(obj)%.c + $(CC) $(CFLAGS) -c -o $@ $< + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/nand_spl/board/amcc/bamboo/config.mk b/nand_spl/board/amcc/bamboo/config.mk new file mode 100644 index 0000000000..f7ec7514f0 --- /dev/null +++ b/nand_spl/board/amcc/bamboo/config.mk @@ -0,0 +1,49 @@ +# +# (C) Copyright 2007 +# Stefan Roese, DENX Software Engineering, sr@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +# +# AMCC 440EP Reference Platform (Bamboo) board +# + +# +# TEXT_BASE for SPL: +# +# On 440EP(x) platforms the SPL is located at 0xfffff000...0xffffffff, +# in the last 4kBytes of memory space in cache. +# We will copy this SPL into instruction-cache in start.S. So we set +# TEXT_BASE to starting address in i-cache here. +# +TEXT_BASE = 0x00800000 + +# PAD_TO used to generate a 16kByte binary needed for the combined image +# -> PAD_TO = TEXT_BASE + 0x4000 +PAD_TO = 0x00804000 + +PLATFORM_CPPFLAGS += -DCONFIG_440=1 + +ifeq ($(debug),1) +PLATFORM_CPPFLAGS += -DDEBUG +endif + +ifeq ($(dbcr),1) +PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000 +endif diff --git a/nand_spl/board/amcc/bamboo/sdram.c b/nand_spl/board/amcc/bamboo/sdram.c new file mode 100644 index 0000000000..4f09072df0 --- /dev/null +++ b/nand_spl/board/amcc/bamboo/sdram.c @@ -0,0 +1,92 @@ +/* + * (C) Copyright 2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <ppc4xx.h> +#include <asm/processor.h> +#include <asm/io.h> + +static void wait_init_complete(void) +{ + u32 val; + + do { + mfsdram(mem_mcsts, val); + } while (!(val & 0x80000000)); +} + +/* + * early_sdram_init() + * + * As the name already indicates, this function is called very early + * from start.S and configures the SDRAM with fixed values. This is needed, + * since the 440EP has no internal SRAM and the 4kB NAND_SPL loader has + * not enough free space to implement the complete I2C SPD DDR autodetection + * routines. Therefore the Bamboo only supports the onboard 64MBytes of SDRAM + * when booting from NAND flash. + */ +void early_sdram_init(void) +{ + /* + * Soft-reset SDRAM controller. + */ + mtsdr(sdr_srst, SDR0_SRST_DMC); + mtsdr(sdr_srst, 0x00000000); + + /* + * Disable memory controller. + */ + mtsdram(mem_cfg0, 0x00000000); + + /* + * Setup some default + */ + mtsdram(mem_uabba, 0x00000000); /* ubba=0 (default) */ + mtsdram(mem_slio, 0x00000000); /* rdre=0 wrre=0 rarw=0 */ + mtsdram(mem_devopt, 0x00000000); /* dll=0 ds=0 (normal) */ + mtsdram(mem_wddctr, 0x00000000); /* wrcp=0 dcd=0 */ + mtsdram(mem_clktr, 0x40000000); /* clkp=1 (90 deg wr) dcdt=0 */ + + /* + * Following for CAS Latency = 2.5 @ 133 MHz PLB + */ + mtsdram(mem_b0cr, 0x00082001); + mtsdram(mem_tr0, 0x41094012); + mtsdram(mem_tr1, 0x8080083d); /* SS=T2 SL=STAGE 3 CD=1 CT=0x00*/ + mtsdram(mem_rtr, 0x04100000); /* Interval 7.8µs @ 133MHz PLB */ + mtsdram(mem_cfg1, 0x00000000); /* Self-refresh exit, disable PM*/ + + /* + * Enable the controller, then wait for DCEN to complete + */ + mtsdram(mem_cfg0, 0x80000000); /* DCEN=1, PMUD=0*/ + wait_init_complete(); +} + +long int initdram(int board_type) +{ + /* + * Nothing to do here, just return size of fixed SDRAM setup + */ + return CFG_MBYTES_SDRAM << 20; +} diff --git a/nand_spl/board/amcc/bamboo/u-boot.lds b/nand_spl/board/amcc/bamboo/u-boot.lds new file mode 100644 index 0000000000..28228f84dd --- /dev/null +++ b/nand_spl/board/amcc/bamboo/u-boot.lds @@ -0,0 +1,65 @@ +/* + * (C) Copyright 2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc:common) +SECTIONS +{ + .resetvec 0x00800FFC : + { + *(.resetvec) + } = 0xffff + + .text : + { + start.o (.text) + init.o (.text) + nand_boot.o (.text) + sdram.o (.text) + ndfc.o (.text) + + *(.text) + *(.fixup) + } + _etext = .; + + .data : + { + *(.rodata*) + *(.data*) + *(.sdata*) + __got2_start = .; + *(.got2) + __got2_end = .; + } + + _edata = .; + + __bss_start = .; + .bss : + { + *(.sbss) + *(.bss) + } + + _end = . ; +} diff --git a/nand_spl/board/amcc/sequoia/Makefile b/nand_spl/board/amcc/sequoia/Makefile index b42da8cf68..ec1be5a768 100644 --- a/nand_spl/board/amcc/sequoia/Makefile +++ b/nand_spl/board/amcc/sequoia/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2006 +# (C) Copyright 2006-2007 # Stefan Roese, DENX Software Engineering, sr@denx.de. # # See file CREDITS for list of people who contributed to this @@ -30,7 +30,7 @@ AFLAGS += -DCONFIG_NAND_SPL CFLAGS += -DCONFIG_NAND_SPL SOBJS = start.o init.o resetvec.o -COBJS = nand_boot.o ndfc.o sdram.o +COBJS = nand_boot.o nand_ecc.o ndfc.o sdram.o SRCS := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c)) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) @@ -85,6 +85,11 @@ $(obj)nand_boot.c: @rm -f $(obj)nand_boot.c ln -s $(SRCTREE)/nand_spl/nand_boot.c $(obj)nand_boot.c +# from drivers/nand directory +$(obj)nand_ecc.c: + @rm -f $(obj)nand_ecc.c + ln -s $(SRCTREE)/drivers/nand/nand_ecc.c $(obj)nand_ecc.c + ######################################################################### $(obj)%.o: $(obj)%.S diff --git a/nand_spl/nand_boot.c b/nand_spl/nand_boot.c index a136fb7074..840a596596 100644 --- a/nand_spl/nand_boot.c +++ b/nand_spl/nand_boot.c @@ -1,5 +1,5 @@ /* - * (C) Copyright 2006 + * (C) Copyright 2006-2007 * Stefan Roese, DENX Software Engineering, sr@denx.de. * * This program is free software; you can redistribute it and/or @@ -24,27 +24,28 @@ #define CFG_NAND_READ_DELAY \ { volatile int dummy; int i; for (i=0; i<10000; i++) dummy = i; } +static int nand_ecc_pos[] = CFG_NAND_ECCPOS; + extern void board_nand_init(struct nand_chip *nand); -extern void ndfc_hwcontrol(struct mtd_info *mtdinfo, int cmd); -extern void ndfc_write_byte(struct mtd_info *mtdinfo, u_char byte); -extern u_char ndfc_read_byte(struct mtd_info *mtdinfo); -extern int ndfc_dev_ready(struct mtd_info *mtdinfo); -extern int jump_to_ram(ulong delta); -extern int jump_to_uboot(ulong addr); -static int nand_is_bad_block(struct mtd_info *mtd, int block) +static int nand_command(struct mtd_info *mtd, int block, int page, int offs, u8 cmd) { struct nand_chip *this = mtd->priv; - int page_addr = block * CFG_NAND_PAGE_COUNT; + int page_addr = page + block * CFG_NAND_PAGE_COUNT; + + if (this->dev_ready) + this->dev_ready(mtd); + else + CFG_NAND_READ_DELAY; /* Begin command latch cycle */ this->hwcontrol(mtd, NAND_CTL_SETCLE); - this->write_byte(mtd, NAND_CMD_READOOB); + this->write_byte(mtd, cmd); /* Set ALE and clear CLE to start address cycle */ this->hwcontrol(mtd, NAND_CTL_CLRCLE); this->hwcontrol(mtd, NAND_CTL_SETALE); /* Column address */ - this->write_byte(mtd, CFG_NAND_BAD_BLOCK_POS); /* A[7:0] */ + this->write_byte(mtd, offs); /* A[7:0] */ this->write_byte(mtd, (uchar)(page_addr & 0xff)); /* A[16:9] */ this->write_byte(mtd, (uchar)((page_addr >> 8) & 0xff)); /* A[24:17] */ #ifdef CFG_NAND_4_ADDR_CYCLE @@ -62,6 +63,15 @@ static int nand_is_bad_block(struct mtd_info *mtd, int block) else CFG_NAND_READ_DELAY; + return 0; +} + +static int nand_is_bad_block(struct mtd_info *mtd, int block) +{ + struct nand_chip *this = mtd->priv; + + nand_command(mtd, block, 0, CFG_NAND_BAD_BLOCK_POS, NAND_CMD_READOOB); + /* * Read on byte */ @@ -74,39 +84,46 @@ static int nand_is_bad_block(struct mtd_info *mtd, int block) static int nand_read_page(struct mtd_info *mtd, int block, int page, uchar *dst) { struct nand_chip *this = mtd->priv; - int page_addr = page + block * CFG_NAND_PAGE_COUNT; + u_char *ecc_calc; + u_char *ecc_code; + u_char *oob_data; int i; + int eccsize = CFG_NAND_ECCSIZE; + int eccbytes = CFG_NAND_ECCBYTES; + int eccsteps = CFG_NAND_ECCSTEPS; + uint8_t *p = dst; + int stat; - /* Begin command latch cycle */ - this->hwcontrol(mtd, NAND_CTL_SETCLE); - this->write_byte(mtd, NAND_CMD_READ0); - /* Set ALE and clear CLE to start address cycle */ - this->hwcontrol(mtd, NAND_CTL_CLRCLE); - this->hwcontrol(mtd, NAND_CTL_SETALE); - /* Column address */ - this->write_byte(mtd, 0); /* A[7:0] */ - this->write_byte(mtd, (uchar)(page_addr & 0xff)); /* A[16:9] */ - this->write_byte(mtd, (uchar)((page_addr >> 8) & 0xff)); /* A[24:17] */ -#ifdef CFG_NAND_4_ADDR_CYCLE - /* One more address cycle for devices > 32MiB */ - this->write_byte(mtd, (uchar)((page_addr >> 16) & 0x0f)); /* A[xx:25] */ -#endif - /* Latch in address */ - this->hwcontrol(mtd, NAND_CTL_CLRALE); + nand_command(mtd, block, page, 0, NAND_CMD_READ0); - /* - * Wait a while for the data to be ready + /* No malloc available for now, just use some temporary locations + * in SDRAM */ - if (this->dev_ready) - this->dev_ready(mtd); - else - CFG_NAND_READ_DELAY; + ecc_calc = (u_char *)(CFG_SDRAM_BASE + 0x10000); + ecc_code = ecc_calc + 0x100; + oob_data = ecc_calc + 0x200; + + for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { + this->enable_hwecc(mtd, NAND_ECC_READ); + this->read_buf(mtd, p, eccsize); + this->calculate_ecc(mtd, p, &ecc_calc[i]); + } + this->read_buf(mtd, oob_data, CFG_NAND_OOBSIZE); - /* - * Read page into buffer - */ - for (i=0; i<CFG_NAND_PAGE_SIZE; i++) - *dst++ = this->read_byte(mtd); + /* Pick the ECC bytes out of the oob data */ + for (i = 0; i < CFG_NAND_ECCTOTAL; i++) + ecc_code[i] = oob_data[nand_ecc_pos[i]]; + + eccsteps = CFG_NAND_ECCSTEPS; + p = dst; + + for (i = 0 ; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { + /* No chance to do something with the possible error message + * from correct_data(). We just hope that all possible errors + * are corrected by this routine. + */ + stat = this->correct_data(mtd, p, &ecc_code[i], &ecc_calc[i]); + } return 0; } |
