fsl: Clean up printing of PCI boot info

Previously boards used a variety of indentations, newline styles, and
colon styles for the PCI information that is printed on bootup.  This
patch unifies the style to look like:

...
NAND:  1024 MiB
PCIE1: connected as Root Complex
           Scanning PCI bus 01
        04  01  8086  1010  0200  00
        04  01  8086  1010  0200  00
        03  00  10b5  8112  0604  00
        02  01  10b5  8518  0604  00
        02  02  10b5  8518  0604  00
        08  00  1957  0040  0b20  00
        07  00  10b5  8518  0604  00
        09  00  10b5  8112  0604  00
        07  01  10b5  8518  0604  00
        07  02  10b5  8518  0604  00
        06  00  10b5  8518  0604  00
        02  03  10b5  8518  0604  00
        01  00  10b5  8518  0604  00
PCIE1: Bus 00 - 0b
PCIE2: connected as Root Complex
           Scanning PCI bus 0d
        0d  00  1957  0040  0b20  00
PCIE2: Bus 0c - 0d
In:    serial
...

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
CC: wd@denx.de
CC: sr@denx.de
CC: galak@kernel.crashing.org

24 files changed, 147 insertions, 147 deletions

diff --git a/board/atum8548/atum8548.c b/board/atum8548/atum8548.c
index 671f9e9853..4fcbb18561 100644
--- a/board/atum8548/atum8548.c
+++ b/board/atum8548/atum8548.c
@@ -218,14 +218,14 @@ void pci_init_board(void)
 
 		pcie1_hose.region_count = 1;
 #endif
-		printf ("    PCIE1 connected to Slot as %s (base addr %lx)\n",
+		printf ("PCIE1: connected to Slot as %s (base addr %lx)\n",
 				pcie_ep ? "Endpoint" : "Root Complex",
 				pci_info[num].regs);
 
 		first_free_busno = fsl_pci_init_port(&pci_info[num++],
 					&pcie1_hose, first_free_busno);
 	} else {
-		printf ("    PCIE1: disabled\n");
+		printf("PCIE1: disabled\n");
 	}
 
 	puts("\n");
@@ -242,7 +242,7 @@ void pci_init_board(void)
 	if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
 		SET_STD_PCI_INFO(pci_info[num], 1);
 		pci_agent = fsl_setup_hose(&pci1_hose, pci_info[num].regs);
-		printf ("\n    PCI1: %d bit, %s MHz, %s, %s, %s (base address %lx)\n",
+		printf("PCI1: %d bit, %s MHz, %s, %s, %s (base address %lx)\n",
 			(pci_32) ? 32 : 64,
 			(pci_speed == 33333000) ? "33" :
 			(pci_speed == 66666000) ? "66" : "unknown",
@@ -254,7 +254,7 @@ void pci_init_board(void)
 		first_free_busno = fsl_pci_init_port(&pci_info[num++],
 					&pci1_hose, first_free_busno);
 	} else {
-		printf ("    PCI: disabled\n");
+		printf("PCI1: disabled\n");
 	}
 
 	puts("\n");
@@ -267,11 +267,11 @@ void pci_init_board(void)
 		SET_STD_PCI_INFO(pci_info[num], 2);
 		pci_agent = fsl_setup_hose(&pci2_hose, pci_info[num].regs);
 
-		puts ("    PCI2\n");
+		puts("PCI2\n");
 		first_free_busno = fsl_pci_init_port(&pci_info[num++],
 					&pci1_hose, first_free_busno);
 	} else {
-		printf ("    PCI2: disabled\n");
+		printf("PCI2: disabled\n");
 	}
 	puts("\n");
 #else
diff --git a/board/freescale/corenet_ds/pci.c b/board/freescale/corenet_ds/pci.c
index e1bca1984c..775b623ccb 100644
--- a/board/freescale/corenet_ds/pci.c
+++ b/board/freescale/corenet_ds/pci.c
@@ -68,13 +68,13 @@ void pci_init_board(void)
 				LAW_TRGT_IF_PCIE_1);
 		SET_STD_PCIE_INFO(pci_info[num], 1);
 		pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
-		printf("    PCIE1 connected to Slot 1 as %s (base addr %lx)\n",
+		printf("PCIE1: connected to Slot 1 as %s (base addr %lx)\n",
 				pcie_ep ? "End Point" : "Root Complex",
 				pci_info[num].regs);
 		first_free_busno = fsl_pci_init_port(&pci_info[num++],
 				&pcie1_hose, first_free_busno);
 	} else {
-		printf ("    PCIE1: disabled\n");
+		printf("PCIE1: disabled\n");
 	}
 #else
 	setbits_be32(&gur->devdisr, FSL_CORENET_DEVDISR_PCIE1); /* disable */
@@ -90,13 +90,13 @@ void pci_init_board(void)
 				LAW_TRGT_IF_PCIE_2);
 		SET_STD_PCIE_INFO(pci_info[num], 2);
 		pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs);
-		printf("    PCIE2 connected to Slot 3 as %s (base addr %lx)\n",
+		printf("PCIE2: connected to Slot 3 as %s (base addr %lx)\n",
 				pcie_ep ? "End Point" : "Root Complex",
 				pci_info[num].regs);
 		first_free_busno = fsl_pci_init_port(&pci_info[num++],
 				&pcie2_hose, first_free_busno);
 	} else {
-		printf ("    PCIE2: disabled\n");
+		printf("PCIE2: disabled\n");
 	}
 #else
 	setbits_be32(&gur->devdisr, FSL_CORENET_DEVDISR_PCIE2); /* disable */
@@ -112,13 +112,13 @@ void pci_init_board(void)
 				LAW_TRGT_IF_PCIE_3);
 		SET_STD_PCIE_INFO(pci_info[num], 3);
 		pcie_ep = fsl_setup_hose(&pcie3_hose, pci_info[num].regs);
-		printf("    PCIE3 connected to Slot 2 as %s (base addr %lx)\n",
+		printf("PCIE3: connected to Slot 2 as %s (base addr %lx)\n",
 				pcie_ep ? "End Point" : "Root Complex",
 				pci_info[num].regs);
 		first_free_busno = fsl_pci_init_port(&pci_info[num++],
 				&pcie3_hose, first_free_busno);
 	} else {
-		printf ("    PCIE3: disabled\n");
+		printf("PCIE3: disabled\n");
 	}
 #else
 	setbits_be32(&gur->devdisr, FSL_CORENET_DEVDISR_PCIE3); /* disable */
@@ -134,13 +134,13 @@ void pci_init_board(void)
 				LAW_TRGT_IF_PCIE_4);
 		SET_STD_PCIE_INFO(pci_info[num], 4);
 		pcie_ep = fsl_setup_hose(&pcie4_hose, pci_info[num].regs);
-		printf("    PCIE4 connected to as %s (base addr %lx)\n",
+		printf("PCIE4: connected to as %s (base addr %lx)\n",
 				pcie_ep ? "End Point" : "Root Complex",
 				pci_info[num].regs);
 		first_free_busno = fsl_pci_init_port(&pci_info[num++],
 				&pcie4_hose, first_free_busno);
 	} else {
-		printf ("    PCIE4: disabled\n");
+		printf("PCIE4: disabled\n");
 	}
 #else
 	setbits_be32(&gur->devdisr, FSL_CORENET_DEVDISR_PCIE4); /* disable */
diff --git a/board/freescale/mpc8536ds/mpc8536ds.c b/board/freescale/mpc8536ds/mpc8536ds.c
index c8e08563b6..8ad7549517 100644
--- a/board/freescale/mpc8536ds/mpc8536ds.c
+++ b/board/freescale/mpc8536ds/mpc8536ds.c
@@ -229,13 +229,13 @@ void pci_init_board(void)
 				LAW_TRGT_IF_PCIE_3);
 		SET_STD_PCIE_INFO(pci_info[num], 3);
 		pcie_ep = fsl_setup_hose(&pcie3_hose, pci_info[num].regs);
-		printf ("    PCIE3 connected to Slot3 as %s (base address %lx)\n",
+		printf("PCIE3: connected to Slot3 as %s (base address %lx)\n",
 			pcie_ep ? "Endpoint" : "Root Complex",
 			pci_info[num].regs);
 		first_free_busno = fsl_pci_init_port(&pci_info[num++],
 					&pcie3_hose, first_free_busno);
 	} else {
-		printf ("    PCIE3: disabled\n");
+		printf("PCIE3: disabled\n");
 	}
 
 	puts("\n");
@@ -253,13 +253,13 @@ void pci_init_board(void)
 				LAW_TRGT_IF_PCIE_1);
 		SET_STD_PCIE_INFO(pci_info[num], 1);
 		pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
-		printf ("    PCIE1 connected to Slot1 as %s (base address %lx)\n",
+		printf("PCIE1: connected to Slot1 as %s (base address %lx)\n",
 			pcie_ep ? "Endpoint" : "Root Complex",
 			pci_info[num].regs);
 		first_free_busno = fsl_pci_init_port(&pci_info[num++],
 					&pcie1_hose, first_free_busno);
 	} else {
-		printf ("    PCIE1: disabled\n");
+		printf("PCIE1: disabled\n");
 	}
 
 	puts("\n");
@@ -277,13 +277,13 @@ void pci_init_board(void)
 				LAW_TRGT_IF_PCIE_2);
 		SET_STD_PCIE_INFO(pci_info[num], 2);
 		pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs);
-		printf ("    PCIE2 connected to Slot 2 as %s (base address %lx)\n",
+		printf("PCIE2: connected to Slot 2 as %s (base address %lx)\n",
 			pcie_ep ? "Endpoint" : "Root Complex",
 			pci_info[num].regs);
 		first_free_busno = fsl_pci_init_port(&pci_info[num++],
 					&pcie2_hose, first_free_busno);
 	} else {
-		printf ("    PCIE2: disabled\n");
+		printf("PCIE2: disabled\n");
 	}
 
 	puts("\n");
@@ -304,7 +304,7 @@ void pci_init_board(void)
 				LAW_TRGT_IF_PCI);
 		SET_STD_PCI_INFO(pci_info[num], 1);
 		pci_agent = fsl_setup_hose(&pci1_hose, pci_info[num].regs);
-		printf ("\n    PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n",
+		printf("PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n",
 			(pci_32) ? 32 : 64,
 			(pci_speed == 33333000) ? "33" :
 			(pci_speed == 66666000) ? "66" : "unknown",
@@ -316,7 +316,7 @@ void pci_init_board(void)
 		first_free_busno = fsl_pci_init_port(&pci_info[num++],
 					&pci1_hose, first_free_busno);
 	} else {
-		printf ("    PCI: disabled\n");
+		printf("PCI: disabled\n");
 	}
 
 	puts("\n");
diff --git a/board/freescale/mpc8540ads/mpc8540ads.c b/board/freescale/mpc8540ads/mpc8540ads.c
index f9ff827f47..d354a26f69 100644
--- a/board/freescale/mpc8540ads/mpc8540ads.c
+++ b/board/freescale/mpc8540ads/mpc8540ads.c
@@ -47,10 +47,10 @@ int checkboard (void)
 	puts("Board: ADS\n");
 
 #ifdef CONFIG_PCI
-	printf("    PCI1: 32 bit, %d MHz (compiled)\n",
+	printf("PCI1: 32 bit, %d MHz (compiled)\n",
 	       CONFIG_SYS_CLK_FREQ / 1000000);
 #else
-	printf("    PCI1: disabled\n");
+	printf("PCI1: disabled\n");
 #endif
 
 	/*
diff --git a/board/freescale/mpc8541cds/mpc8541cds.c b/board/freescale/mpc8541cds/mpc8541cds.c
index 0580fe7239..59ec60446e 100644
--- a/board/freescale/mpc8541cds/mpc8541cds.c
+++ b/board/freescale/mpc8541cds/mpc8541cds.c
@@ -221,17 +221,17 @@ int checkboard (void)
 		MPC85XX_CPU_BOARD_MAJOR (cpu_board_rev),
 		MPC85XX_CPU_BOARD_MINOR (cpu_board_rev), cpu_board_rev);
 
-	printf ("    PCI1: %d bit, %s MHz, %s\n",
+	printf("PCI1: %d bit, %s MHz, %s\n",
 		(pci1_32) ? 32 : 64,
 		(pci1_speed == 33000000) ? "33" :
 		(pci1_speed == 66000000) ? "66" : "unknown",
 		pci1_clk_sel ? "sync" : "async");
 
 	if (pci_dual) {
-		printf ("    PCI2: 32 bit, 66 MHz, %s\n",
+		printf("PCI2: 32 bit, 66 MHz, %s\n",
 			pci2_clk_sel ? "sync" : "async");
 	} else {
-		printf ("    PCI2: disabled\n");
+		printf("PCI2: disabled\n");
 	}
 
 	/*
diff --git a/board/freescale/mpc8544ds/mpc8544ds.c b/board/freescale/mpc8544ds/mpc8544ds.c
index da3a2b6eec..3bbf0c273a 100644
--- a/board/freescale/mpc8544ds/mpc8544ds.c
+++ b/board/freescale/mpc8544ds/mpc8544ds.c
@@ -142,9 +142,9 @@ void pci_init_board(void)
 
 		pcie3_hose.region_count = 1;
 #endif
-		printf ("    PCIE3 connected to ULI as %s (base addr %lx)\n",
-				pcie_ep ? "Endpoint" : "Root Complex",
-				pci_info[num].regs);
+		printf("PCIE3: connected to ULI as %s (base addr %lx)\n",
+			pcie_ep ? "Endpoint" : "Root Complex",
+			pci_info[num].regs);
 		first_free_busno = fsl_pci_init_port(&pci_info[num++],
 					&pcie3_hose, first_free_busno);
 
@@ -154,7 +154,7 @@ void pci_init_board(void)
 		 */
 		in_be32((u32 *)CONFIG_SYS_PCIE3_MEM_BUS);
 	} else {
-		printf ("    PCIE3: disabled\n");
+		printf("PCIE3: disabled\n");
 	}
 	puts("\n");
 #else
@@ -177,14 +177,14 @@ void pci_init_board(void)
 
 		pcie1_hose.region_count = 1;
 #endif
-		printf ("    PCIE1 connected to Slot 2 as %s (base addr %lx)\n",
+		printf("PCIE1: connected to Slot 2 as %s (base addr %lx)\n",
 				pcie_ep ? "Endpoint" : "Root Complex",
 				pci_info[num].regs);
 
 		first_free_busno = fsl_pci_init_port(&pci_info[num++],
 					&pcie1_hose, first_free_busno);
 	} else {
-		printf ("    PCIE1: disabled\n");
+		printf("PCIE1: disabled\n");
 	}
 
 	puts("\n");
@@ -208,13 +208,13 @@ void pci_init_board(void)
 
 		pcie2_hose.region_count = 1;
 #endif
-		printf ("    PCIE2 connected to Slot 1 as %s (base addr %lx)\n",
-				pcie_ep ? "Endpoint" : "Root Complex",
-				pci_info[num].regs);
+		printf("PCIE2: connected to Slot 1 as %s (base addr %lx)\n",
+			pcie_ep ? "Endpoint" : "Root Complex",
+			pci_info[num].regs);
 		first_free_busno = fsl_pci_init_port(&pci_info[num++],
 					&pcie2_hose, first_free_busno);
 	} else {
-		printf ("    PCIE2: disabled\n");
+		printf("PCIE2: disabled\n");
 	}
 
 	puts("\n");
@@ -231,7 +231,7 @@ void pci_init_board(void)
 	if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
 		SET_STD_PCI_INFO(pci_info[num], 1);
 		pci_agent = fsl_setup_hose(&pci1_hose, pci_info[num].regs);
-		printf ("\n    PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n",
+		printf("PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n",
 			(pci_32) ? 32 : 64,
 			(pci_speed == 33333000) ? "33" :
 			(pci_speed == 66666000) ? "66" : "unknown",
@@ -243,7 +243,7 @@ void pci_init_board(void)
 		first_free_busno = fsl_pci_init_port(&pci_info[num++],
 					&pci1_hose, first_free_busno);
 	} else {
-		printf ("    PCI: disabled\n");
+		printf("PCI: disabled\n");
 	}
 
 	puts("\n");
diff --git a/board/freescale/mpc8548cds/mpc8548cds.c b/board/freescale/mpc8548cds/mpc8548cds.c
index 23e552bde7..14c902cb96 100644
--- a/board/freescale/mpc8548cds/mpc8548cds.c
+++ b/board/freescale/mpc8548cds/mpc8548cds.c
@@ -284,7 +284,7 @@ void pci_init_board(void)
 	if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
 		SET_STD_PCI_INFO(pci_info[num], 1);
 		pci_agent = fsl_setup_hose(&pci1_hose, pci_info[num].regs);
-		printf ("\n    PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n",
+		printf("PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n",
 			(pci_32) ? 32 : 64,
 			(pci_speed == 33333000) ? "33" :
 			(pci_speed == 66666000) ? "66" : "unknown",
@@ -308,7 +308,7 @@ void pci_init_board(void)
 		}
 #endif
 	} else {
-		printf ("    PCI: disabled\n");
+		printf("PCI: disabled\n");
 	}
 
 	puts("\n");
@@ -321,10 +321,10 @@ void pci_init_board(void)
 	uint pci2_clk_sel = porpllsr & 0x4000;	/* PORPLLSR[17] */
 	uint pci_dual = get_pci_dual ();	/* PCI DUAL in CM_PCI[3] */
 	if (pci_dual) {
-		printf ("    PCI2: 32 bit, 66 MHz, %s\n",
+		printf("PCI2: 32 bit, 66 MHz, %s\n",
 			pci2_clk_sel ? "sync" : "async");
 	} else {
-		printf ("    PCI2: disabled\n");
+		printf("PCI2: disabled\n");
 	}
 }
 #else
@@ -337,14 +337,14 @@ void pci_init_board(void)
 	if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
 		SET_STD_PCIE_INFO(pci_info[num], 1);
 		pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
-		printf ("    PCIE1 connected to Slot as %s (base addr %lx)\n",
-				pcie_ep ? "Endpoint" : "Root Complex",
-				pci_info[num].regs);
+		printf("PCIE1: connected to Slot as %s (base addr %lx)\n",
+			pcie_ep ? "Endpoint" : "Root Complex",
+			pci_info[num].regs);
 
 		first_free_busno = fsl_pci_init_port(&pci_info[num++],
 					&pcie1_hose, first_free_busno);
 	} else {
-		printf ("    PCIE1: disabled\n");
+		printf("PCIE1: disabled\n");
 	}
 
 	puts("\n");
diff --git a/board/freescale/mpc8555cds/mpc8555cds.c b/board/freescale/mpc8555cds/mpc8555cds.c
index b7e0e0cd82..edaba26f53 100644
--- a/board/freescale/mpc8555cds/mpc8555cds.c
+++ b/board/freescale/mpc8555cds/mpc8555cds.c
@@ -219,17 +219,17 @@ int checkboard (void)
 		MPC85XX_CPU_BOARD_MAJOR (cpu_board_rev),
 		MPC85XX_CPU_BOARD_MINOR (cpu_board_rev), cpu_board_rev);
 
-	printf ("    PCI1: %d bit, %s MHz, %s\n",
+	printf("PCI1: %d bit, %s MHz, %s\n",
 		(pci1_32) ? 32 : 64,
 		(pci1_speed == 33000000) ? "33" :
 		(pci1_speed == 66000000) ? "66" : "unknown",
 		pci1_clk_sel ? "sync" : "async");
 
 	if (pci_dual) {
-		printf ("    PCI2: 32 bit, 66 MHz, %s\n",
+		printf("PCI2: 32 bit, 66 MHz, %s\n",
 			pci2_clk_sel ? "sync" : "async");
 	} else {
-		printf ("    PCI2: disabled\n");
+		printf("PCI2: disabled\n");
 	}
 
 	/*
diff --git a/board/freescale/mpc8560ads/mpc8560ads.c b/board/freescale/mpc8560ads/mpc8560ads.c
index 423e9d72a7..1761431e33 100644
--- a/board/freescale/mpc8560ads/mpc8560ads.c
+++ b/board/freescale/mpc8560ads/mpc8560ads.c
@@ -252,10 +252,10 @@ int checkboard (void)
 	puts("Board: ADS\n");
 
 #ifdef CONFIG_PCI
-	printf("    PCI1: 32 bit, %d MHz (compiled)\n",
+	printf("PCI1: 32 bit, %d MHz (compiled)\n",
 	       CONFIG_SYS_CLK_FREQ / 1000000);
 #else
-	printf("    PCI1: disabled\n");
+	printf("PCI1: disabled\n");
 #endif
 
 	/*
diff --git a/board/freescale/mpc8568mds/mpc8568mds.c b/board/freescale/mpc8568mds/mpc8568mds.c
index bd859e4ee4..d74fcac983 100644
--- a/board/freescale/mpc8568mds/mpc8568mds.c
+++ b/board/freescale/mpc8568mds/mpc8568mds.c
@@ -378,7 +378,7 @@ void pci_init_board(void)
 	if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
 		SET_STD_PCI_INFO(pci_info[num], 1);
 		pci_agent = fsl_setup_hose(&pci1_hose, pci_info[num].regs);
-		printf ("\n    PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n",
+		printf("PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n",
 			(pci_32) ? 32 : 64,
 			(pci_speed == 33333000) ? "33" :
 			(pci_speed == 66666000) ? "66" : "unknown",
@@ -390,7 +390,7 @@ void pci_init_board(void)
 		first_free_busno = fsl_pci_init_port(&pci_info[num++],
 					&pci1_hose, first_free_busno);
 	} else {
-		printf ("    PCI: disabled\n");
+		printf("PCI: disabled\n");
 	}
 
 	puts("\n");
@@ -404,14 +404,14 @@ void pci_init_board(void)
 	if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
 		SET_STD_PCIE_INFO(pci_info[num], 1);
 		pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
-		printf ("    PCIE1 connected to Slot as %s (base addr %lx)\n",
+		printf("PCIE1: connected to Slot as %s (base addr %lx)\n",
 				pcie_ep ? "Endpoint" : "Root Complex",
 				pci_info[num].regs);
 
 		first_free_busno = fsl_pci_init_port(&pci_info[num++],
 					&pcie1_hose, first_free_busno);
 	} else {
-		printf ("    PCIE1: disabled\n");
+		printf("PCIE1: disabled\n");
 	}
 
 	puts("\n");
diff --git a/board/freescale/mpc8569mds/mpc8569mds.c b/board/freescale/mpc8569mds/mpc8569mds.c
index 743e712b84..dc0884e7bf 100644
--- a/board/freescale/mpc8569mds/mpc8569mds.c
+++ b/board/freescale/mpc8569mds/mpc8569mds.c
@@ -584,13 +584,13 @@ void pci_init_board(void)
 	if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
 		SET_STD_PCIE_INFO(pci_info[num], 1);
 		pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
-		printf ("    PCIE1 connected to Slot as %s (base addr %lx)\n",
-				pcie_ep ? "Endpoint" : "Root Complex",
-				pci_info[num].regs);
+		printf("PCIE1: connected to Slot as %s (base addr %lx)\n",
+			pcie_ep ? "Endpoint" : "Root Complex",
+			pci_info[num].regs);
 		first_free_busno = fsl_pci_init_port(&pci_info[num++],
 					&pcie1_hose, first_free_busno);
 	} else {
-		printf ("    PCIE1: disabled\n");
+		printf("PCIE1: disabled\n");
 	}
 
 	puts("\n");
diff --git a/board/freescale/mpc8572ds/mpc8572ds.c b/board/freescale/mpc8572ds/mpc8572ds.c
index 6b96dfc165..2125274215 100644
--- a/board/freescale/mpc8572ds/mpc8572ds.c
+++ b/board/freescale/mpc8572ds/mpc8572ds.c
@@ -192,9 +192,9 @@ void pci_init_board(void)
 	if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE3)){
 		SET_STD_PCIE_INFO(pci_info[num], 3);
 		pcie_ep = fsl_setup_hose(&pcie3_hose, pci_info[num].regs);
-		printf ("    PCIE3 connected to ULI as %s (base addr %lx)\n",
-				pcie_ep ? "Endpoint" : "Root Complex",
-				pci_info[num].regs);
+		printf("PCIE3: connected to ULI as %s (base addr %lx)\n",
+			pcie_ep ? "Endpoint" : "Root Complex",
+			pci_info[num].regs);
 		first_free_busno = fsl_pci_init_port(&pci_info[num++],
 					&pcie3_hose, first_free_busno);
 		/*
@@ -211,7 +211,7 @@ void pci_init_board(void)
 			in_be32(p);
 		}
 	} else {
-		printf ("    PCIE3: disabled\n");
+		printf("PCIE3: disabled\n");
 	}
 	puts("\n");
 #else
@@ -224,13 +224,13 @@ void pci_init_board(void)
 	if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE2)){
 		SET_STD_PCIE_INFO(pci_info[num], 2);
 		pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs);
-		printf ("    PCIE2 connected to Slot 1 as %s (base addr %lx)\n",
-				pcie_ep ? "Endpoint" : "Root Complex",
-				pci_info[num].regs);
+		printf("PCIE2: connected to Slot 1 as %s (base addr %lx)\n",
+			pcie_ep ? "Endpoint" : "Root Complex",
+			pci_info[num].regs);
 		first_free_busno = fsl_pci_init_port(&pci_info[num++],
 					&pcie2_hose, first_free_busno);
 	} else {
-		printf ("    PCIE2: disabled\n");
+		printf("PCIE2: disabled\n");
 	}
 
 	puts("\n");
@@ -244,13 +244,13 @@ void pci_init_board(void)
 	if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
 		SET_STD_PCIE_INFO(pci_info[num], 1);
 		pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
-		printf ("    PCIE1 connected to Slot 2 as %s (base addr %lx)\n",
+		printf("PCIE1: connected to Slot 2 as %s (base addr %lx)\n",
 				pcie_ep ? "Endpoint" : "Root Complex",
 				pci_info[num].regs);
 		first_free_busno = fsl_pci_init_port(&pci_info[num++],
 					&pcie1_hose, first_free_busno);
 	} else {
-		printf ("    PCIE1: disabled\n");
+		printf("PCIE1: disabled\n");
 	}
 
 	puts("\n");
diff --git a/board/freescale/mpc8610hpcd/mpc8610hpcd.c b/board/freescale/mpc8610hpcd/mpc8610hpcd.c
index f67f3e3c56..61a635de78 100644
--- a/board/freescale/mpc8610hpcd/mpc8610hpcd.c
+++ b/board/freescale/mpc8610hpcd/mpc8610hpcd.c
@@ -244,14 +244,14 @@ void pci_init_board(void)
 	if (pcie_configured && !(devdisr & MPC86xx_DEVDISR_PCIE1)){
 		SET_STD_PCIE_INFO(pci_info[num], 1);
 		pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
-		printf ("    PCIE1 connected to ULI as %s (base addr %lx)\n",
-				pcie_ep ? "Endpoint" : "Root Complex",
-				pci_info[num].regs);
+		printf("PCIE1: connected to ULI as %s (base addr %lx)\n",
+			pcie_ep ? "Endpoint" : "Root Complex",
+			pci_info[num].regs);
 
 		first_free_busno = fsl_pci_init_port(&pci_info[num++],
 					&pcie1_hose, first_free_busno);
 	} else {
-		printf ("    PCIE1: disabled\n");
+		printf("PCIE1: disabled\n");
 	}
 
 	puts("\n");
@@ -265,13 +265,13 @@ void pci_init_board(void)
 	if (pcie_configured && !(devdisr & MPC86xx_DEVDISR_PCIE2)){
 		SET_STD_PCIE_INFO(pci_info[num], 2);
 		pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs);
-		printf ("    PCIE2 connected to Slot as %s (base addr %lx)\n",
-				pcie_ep ? "Endpoint" : "Root Complex",
-				pci_info[num].regs);
+		printf("PCIE2: connected to Slot as %s (base addr %lx)\n",
+			pcie_ep ? "Endpoint" : "Root Complex",
+			pci_info[num].regs);
 		first_free_busno = fsl_pci_init_port(&pci_info[num++],
 					&pcie2_hose, first_free_busno);
 	} else {
-		printf ("    PCIE2: disabled\n");
+		printf("PCIE2: disabled\n");
 	}
 
 	puts("\n");
@@ -283,14 +283,14 @@ void pci_init_board(void)
 	if (!(devdisr & MPC86xx_DEVDISR_PCI1)) {
 		SET_STD_PCI_INFO(pci_info[num], 1);
 		pci_agent = fsl_setup_hose(&pci1_hose, pci_info[num].regs);
-		printf(" PCI connected to PCI slots as %s" \
+		printf("PCI: connected to PCI slots as %s" \
 			" (base address %lx)\n",
 			pci_agent ? "Agent" : "Host",
 			pci_info[num].regs);
 		first_free_busno = fsl_pci_init_port(&pci_info[num++],
 					&pci1_hose, first_free_busno);
 	} else {
-		printf ("    PCI: disabled\n");
+		printf("PCI: disabled\n");
 	}
 
 	puts("\n");
diff --git a/board/freescale/mpc8641hpcn/mpc8641hpcn.c b/board/freescale/mpc8641hpcn/mpc8641hpcn.c
index 092ead6653..812111db10 100644
--- a/board/freescale/mpc8641hpcn/mpc8641hpcn.c
+++ b/board/freescale/mpc8641hpcn/mpc8641hpcn.c
@@ -157,9 +157,9 @@ void pci_init_board(void)
 	if (pcie_configured && !(devdisr & MPC86xx_DEVDISR_PCIEX1)) {
 		SET_STD_PCIE_INFO(pci_info[num], 1);
 		pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
-		printf("    PCIE1 connected to ULI as %s (base addr %lx)\n",
-				pcie_ep ? "Endpoint" : "Root Complex",
-				pci_info[num].regs);
+		printf("PCIE1: connected to ULI as %s (base addr %lx)\n",
+			pcie_ep ? "Endpoint" : "Root Complex",
+			pci_info[num].regs);
 		first_free_busno = fsl_pci_init_port(&pci_info[num++],
 					&pcie1_hose, first_free_busno);
 
@@ -171,22 +171,22 @@ void pci_init_board(void)
 				       + CONFIG_SYS_PCIE1_MEM_SIZE - 0x1000000)));
 
 	} else {
-		puts("    PCIE1: disabled\n");
+		puts("PCIE1: disabled\n");
 	}
 #else
-	puts("    PCIE1: disabled\n");
+	puts("PCIE1: disabled\n");
 #endif /* CONFIG_PCIE1 */
 
 #ifdef CONFIG_PCIE2
 	SET_STD_PCIE_INFO(pci_info[num], 2);
 	pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs);
-	printf("    PCIE2 connected as %s (base addr %lx)\n",
-			pcie_ep ? "Endpoint" : "Root Complex",
-			pci_info[num].regs);
+	printf("PCIE2: connected as %s (base addr %lx)\n",
+		pcie_ep ? "Endpoint" : "Root Complex",
+		pci_info[num].regs);
 	first_free_busno = fsl_pci_init_port(&pci_info[num++],
 				&pcie2_hose, first_free_busno);
 #else
-	puts("    PCIE2: disabled\n");
+	puts("PCIE2: disabled\n");
 #endif /* CONFIG_PCIE2 */
 
 }
diff --git a/board/freescale/p1022ds/p1022ds.c b/board/freescale/p1022ds/p1022ds.c
index ee93e8b815..7cb549b1bf 100644
--- a/board/freescale/p1022ds/p1022ds.c
+++ b/board/freescale/p1022ds/p1022ds.c
@@ -225,7 +225,7 @@ static void configure_pcie(struct fsl_pci_info *info,
 	set_next_law(info->mem_phys, law_size_bits(info->mem_size), info->law);
 	set_next_law(info->io_phys, law_size_bits(info->io_size), info->law);
 	is_endpoint = fsl_setup_hose(hose, info->regs);
-	printf("    PCIE%u connected to %s as %s (base addr %lx)\n",
+	printf("PCIE%u: connected to %s as %s (base addr %lx)\n",
 	       info->pci_num, connected,
 	       is_endpoint ? "Endpoint" : "Root Complex", info->regs);
 	bus_number = fsl_pci_init_port(info, hose, bus_number);
@@ -255,7 +255,7 @@ void pci_init_board(void)
 		SET_STD_PCIE_INFO(pci_info, 1);
 		configure_pcie(&pci_info, &pcie1_hose, serdes_slot_name(PCIE1));
 	} else {
-		printf("    PCIE1: disabled\n");
+		printf("PCIE1: disabled\n");
 	}
 #else
 	setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE); /* disable */
@@ -266,7 +266,7 @@ void pci_init_board(void)
 		SET_STD_PCIE_INFO(pci_info, 2);
 		configure_pcie(&pci_info, &pcie2_hose, serdes_slot_name(PCIE2));
 	} else {
-		printf("    PCIE2: disabled\n");
+		printf("PCIE2: disabled\n");
 	}
 #else
 	setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE2); /* disable */
@@ -277,7 +277,7 @@ void pci_init_board(void)
 		SET_STD_PCIE_INFO(pci_info, 3);
 		configure_pcie(&pci_info, &pcie3_hose, serdes_slot_name(PCIE3));
 	} else {
-		printf("    PCIE3: disabled\n");
+		printf("PCIE3: disabled\n");
 	}
 #else
 	setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE3); /* disable */
diff --git a/board/freescale/p1_p2_rdb/pci.c b/board/freescale/p1_p2_rdb/pci.c
index 97d4f834b0..e2ed29c3c4 100644
--- a/board/freescale/p1_p2_rdb/pci.c
+++ b/board/freescale/p1_p2_rdb/pci.c
@@ -65,13 +65,13 @@ void pci_init_board(void)
 	if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
 		SET_STD_PCIE_INFO(pci_info[num], 2);
 		pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs);
-		printf("    PCIE2 connected to Slot 1 as %s (base addr %lx)\n",
-				pcie_ep ? "Endpoint" : "Root Complex",
-				pci_info[num].regs);
+		printf("PCIE2: connected to Slot 1 as %s (base addr %lx)\n",
+			pcie_ep ? "Endpoint" : "Root Complex",
+			pci_info[num].regs);
 		first_free_busno = fsl_pci_init_port(&pci_info[num++],
 					&pcie2_hose, first_free_busno);
 	} else {
-		printf ("    PCIE2: disabled\n");
+		printf("PCIE2: disabled\n");
 	}
 	puts("\n");
 #else
@@ -84,13 +84,13 @@ void pci_init_board(void)
 	if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
 		SET_STD_PCIE_INFO(pci_info[num], 1);
 		pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
-		printf("    PCIE1 connected to Slot 2 as %s (base addr %lx)\n",
-				pcie_ep ? "Endpoint" : "Root Complex",
-				pci_info[num].regs);
+		printf("PCIE1: connected to Slot 2 as %s (base addr %lx)\n",
+			pcie_ep ? "Endpoint" : "Root Complex",
+			pci_info[num].regs);
 		first_free_busno = fsl_pci_init_port(&pci_info[num++],
 					&pcie1_hose, first_free_busno);
 	} else {
-		printf ("    PCIE1: disabled\n");
+		printf("PCIE1: disabled\n");
 	}
 	puts("\n");
 #else
diff --git a/board/freescale/p2020ds/p2020ds.c b/board/freescale/p2020ds/p2020ds.c
index 608ff916da..f9882722c9 100644
--- a/board/freescale/p2020ds/p2020ds.c
+++ b/board/freescale/p2020ds/p2020ds.c
@@ -218,9 +218,9 @@ void pci_init_board(void)
 	if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE2)) {
 		SET_STD_PCIE_INFO(pci_info[num], 2);
 		pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs);
-		printf("    PCIE2 connected to ULI as %s (base addr %lx)\n",
-				pcie_ep ? "Endpoint" : "Root Complex",
-				pci_info[num].regs);
+		printf("PCIE2: connected to ULI as %s (base addr %lx)\n",
+			pcie_ep ? "Endpoint" : "Root Complex",
+			pci_info[num].regs);
 		first_free_busno = fsl_pci_init_port(&pci_info[num++],
 					&pcie2_hose, first_free_busno);
 
@@ -245,7 +245,7 @@ void pci_init_board(void)
 		}
 #endif
 	} else {
-		printf("    PCIE2: disabled\n");
+		printf("PCIE2: disabled\n");
 	}
 	puts("\n");
 #else
@@ -258,13 +258,13 @@ void pci_init_board(void)
 	if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE3)) {
 		SET_STD_PCIE_INFO(pci_info[num], 3);
 		pcie_ep = fsl_setup_hose(&pcie3_hose, pci_info[num].regs);
-		printf("    PCIE3 connected to Slot 1 as %s (base addr %lx)\n",
-				pcie_ep ? "Endpoint" : "Root Complex",
-				pci_info[num].regs);
+		printf("PCIE3: connected to Slot 1 as %s (base addr %lx)\n",
+			pcie_ep ? "Endpoint" : "Root Complex",
+			pci_info[num].regs);
 		first_free_busno = fsl_pci_init_port(&pci_info[num++],
 					&pcie3_hose, first_free_busno);
 	} else {
-		printf("    PCIE3: disabled\n");
+		printf("PCIE3: disabled\n");
 	}
 	puts("\n");
 #else
@@ -277,13 +277,13 @@ void pci_init_board(void)
 	if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)) {
 		SET_STD_PCIE_INFO(pci_info[num], 1);
 		pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
-		printf("    PCIE1 connected to Slot 2 as %s (base addr %lx)\n",
-				pcie_ep ? "Endpoint" : "Root Complex",
-				pci_info[num].regs);
+		printf("PCIE1: connected to Slot 2 as %s (base addr %lx)\n",
+			pcie_ep ? "Endpoint" : "Root Complex",
+			pci_info[num].regs);
 		first_free_busno = fsl_pci_init_port(&pci_info[num++],
 					&pcie1_hose, first_free_busno);
 	} else {
-		printf("    PCIE1: disabled\n");
+		printf("PCIE1: disabled\n");
 	}
 	puts("\n");
 #else
diff --git a/board/pm854/pm854.c b/board/pm854/pm854.c
index a302b91767..0b8ea8192c 100644
--- a/board/pm854/pm854.c
+++ b/board/pm854/pm854.c
@@ -59,10 +59,10 @@ int checkboard (void)
 	puts("Board: MicroSys PM854\n");
 
 #ifdef CONFIG_PCI
-	printf("    PCI1: 32 bit, %d MHz (compiled)\n",
+	printf("PCI1: 32 bit, %d MHz (compiled)\n",
 	       CONFIG_SYS_CLK_FREQ / 1000000);
 #else
-	printf("    PCI1: disabled\n");
+	printf("PCI1: disabled\n");
 #endif
 
 	/*
diff --git a/board/pm856/pm856.c b/board/pm856/pm856.c
index f9d92d9984..4e059b0859 100644
--- a/board/pm856/pm856.c
+++ b/board/pm856/pm856.c
@@ -213,10 +213,10 @@ int checkboard (void)
 	puts("Board: MicroSys PM856\n");
 
 #ifdef CONFIG_PCI
-	printf("    PCI1: 32 bit, %d MHz (compiled)\n",
+	printf("PCI1: 32 bit, %d MHz (compiled)\n",
 	       CONFIG_SYS_CLK_FREQ / 1000000);
 #else
-	printf("    PCI1: disabled\n");
+	printf("PCI1: disabled\n");
 #endif
 
 	/*
diff --git a/board/sbc8548/sbc8548.c b/board/sbc8548/sbc8548.c
index 733979c619..272428fbf8 100644
--- a/board/sbc8548/sbc8548.c
+++ b/board/sbc8548/sbc8548.c
@@ -342,7 +342,7 @@ pci_init_board(void)
 		uint pci_clk_sel = porpllsr & MPC85xx_PORDEVSR_PCI1_SPD;
 		uint pci_speed = CONFIG_SYS_CLK_FREQ;	/* get_clock_freq() */
 
-		printf ("    PCI host: %d bit, %s MHz, %s, %s\n",
+		printf("PCI: Host, %d bit, %s MHz, %s, %s\n",
 			(pci_32) ? 32 : 64,
 			(pci_speed == 33000000) ? "33" :
 			(pci_speed == 66000000) ? "66" : "unknown",
@@ -353,7 +353,7 @@ pci_init_board(void)
 		first_free_busno = fsl_pci_init_port(&pci_info[num++],
 					&pci1_hose, first_free_busno);
 	} else {
-		printf ("    PCI: disabled\n");
+		printf("PCI: disabled\n");
 	}
 
 	puts("\n");
@@ -368,11 +368,11 @@ pci_init_board(void)
 
 	if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
 		SET_STD_PCIE_INFO(pci_info[num], 1);
-		printf ("    PCIE at base address %lx\n", pci_info[num].regs);
+		printf("PCIE: base address %lx\n", pci_info[num].regs);
 		first_free_busno = fsl_pci_init_port(&pci_info[num++],
 					&pcie1_hose, first_free_busno);
 	} else {
-		printf ("    PCIE: disabled\n");
+		printf("PCIE: disabled\n");
 	}
 
 	puts("\n");
diff --git a/board/sbc8641d/sbc8641d.c b/board/sbc8641d/sbc8641d.c
index d954d2f6f7..5bf2364ee2 100644
--- a/board/sbc8641d/sbc8641d.c
+++ b/board/sbc8641d/sbc8641d.c
@@ -221,29 +221,29 @@ void pci_init_board(void)
 	if (pcie_configured && !(devdisr & MPC86xx_DEVDISR_PCIEX1)) {
 		SET_STD_PCIE_INFO(pci_info[num], 1);
 		pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
-		printf("    PCIE1 connected as %s (base addr %lx)\n",
-				pcie_ep ? "Endpoint" : "Root Complex",
-				pci_info[num].regs);
+		printf("PCIE1: connected as %s (base addr %lx)\n",
+			pcie_ep ? "Endpoint" : "Root Complex",
+			pci_info[num].regs);
 		first_free_busno = fsl_pci_init_port(&pci_info[num++],
 					&pcie1_hose, first_free_busno);
 	} else {
-		puts("    PCIE1: disabled\n");
+		puts("PCIE1: disabled\n");
 	}
 #else
-	puts("    PCIE1: disabled\n");
+	puts("PCIE1: disabled\n");
 #endif /* CONFIG_PCIE1 */
 
 #ifdef CONFIG_PCIE2
 
 	SET_STD_PCIE_INFO(pci_info[num], 2);
 	pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs);
-	printf("    PCIE2 connected as %s (base addr %lx)\n",
-			pcie_ep ? "Endpoint" : "Root Complex",
-			pci_info[num].regs);
+	printf("PCIE2: connected as %s (base addr %lx)\n",
+		pcie_ep ? "Endpoint" : "Root Complex",
+		pci_info[num].regs);
 	first_free_busno = fsl_pci_init_port(&pci_info[num++],
 				&pcie2_hose, first_free_busno);
 #else
-	puts("    PCIE2: disabled\n");
+	puts("PCIE2: disabled\n");
 #endif /* CONFIG_PCIE2 */
 }
 
diff --git a/board/tqc/tqm85xx/tqm85xx.c b/board/tqc/tqm85xx/tqm85xx.c
index b21e7914c3..527af6dd2e 100644
--- a/board/tqc/tqm85xx/tqm85xx.c
+++ b/board/tqc/tqm85xx/tqm85xx.c
@@ -567,7 +567,7 @@ void pci_init_board (void)
 	if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
 		SET_STD_PCI_INFO(pci_info[num], 1);
 		pcie_ep = fsl_setup_hose(&pci1_hose, pci_info[num].regs);
-		printf ("\n   PCI1:  %d bit, %s MHz, %s, %s, %s\n",
+		printf("PCI1:  %d bit, %s MHz, %s, %s, %s\n",
 			(pci_32) ? 32 : 64,
 			(pci_speed == 33333333) ? "33" :
 			(pci_speed == 66666666) ? "66" : "unknown",
@@ -591,7 +591,7 @@ void pci_init_board (void)
 		}
 #endif
 	} else {
-		printf("    PCI1: disabled\n");
+		printf("PCI1: disabled\n");
 	}
 #else
 	setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI1);
@@ -603,12 +603,12 @@ void pci_init_board (void)
 	if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)) {
 		SET_STD_PCIE_INFO(pci_info[num], 1);
 		pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
-		printf("    PCIE1 connected as %s\n",
+		printf("PCIE1: connected as %s\n",
 			pcie_ep ? "Endpoint" : "Root Complex");
 		first_free_busno = fsl_pci_init_port(&pci_info[num++],
 					&pcie1_hose, first_free_busno);
 	} else {
-		printf("    PCIE1: disabled\n");
+		printf("PCIE1: disabled\n");
 	}
 #else
 	setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE);
diff --git a/board/xes/common/fsl_8xxx_pci.c b/board/xes/common/fsl_8xxx_pci.c
index f425ceedc4..4a0965bf08 100644
--- a/board/xes/common/fsl_8xxx_pci.c
+++ b/board/xes/common/fsl_8xxx_pci.c
@@ -95,7 +95,7 @@ void pci_init_board(void)
 	if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
 		SET_STD_PCI_INFO(pci_info[num], 1);
 		pcie_ep = fsl_setup_hose(&pci1_hose, pci_info[num].regs);
-		printf("\n    PCI1: %d bit %s, %s %d MHz, %s, %s\n",
+		printf("PCI1: %d bit %s, %s %d MHz, %s, %s\n",
 			pci_32 ? 32 : 64,
 			pcix ? "PCIX" : "PCI",
 			pci_spd_norm ? ">=" : "<=",
@@ -106,7 +106,7 @@ void pci_init_board(void)
 		first_free_busno = fsl_pci_init_port(&pci_info[num++],
 					&pci1_hose, first_free_busno);
 	} else {
-		printf("    PCI1: disabled\n");
+		printf("PCI1: disabled\n");
 	}
 #elif defined CONFIG_MPC8548
 	/* PCI1 not present on MPC8572 */
@@ -119,12 +119,12 @@ void pci_init_board(void)
 	if (pcie_configured && !(devdisr & MPC8xxx_DEVDISR_PCIE1)) {
 		SET_STD_PCIE_INFO(pci_info[num], 1);
 		pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
-		printf("    PCIE1 connected as %s\n",
+		printf("PCIE1: connected as %s\n",
 			pcie_ep ? "Endpoint" : "Root Complex");
 		first_free_busno = fsl_pci_init_port(&pci_info[num++],
 					&pcie1_hose, first_free_busno);
 	} else {
-		printf("    PCIE1: disabled\n");
+		printf("PCIE1: disabled\n");
 	}
 #else
 	setbits_be32(&gur->devdisr, MPC8xxx_DEVDISR_PCIE1);
@@ -136,12 +136,12 @@ void pci_init_board(void)
 	if (pcie_configured && !(devdisr & MPC8xxx_DEVDISR_PCIE2)) {
 		SET_STD_PCIE_INFO(pci_info[num], 2);
 		pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs);
-		printf("    PCIE2 connected as %s\n",
+		printf("PCIE2: connected as %s\n",
 			pcie_ep ? "Endpoint" : "Root Complex");
 		first_free_busno = fsl_pci_init_port(&pci_info[num++],
 					&pcie2_hose, first_free_busno);
 	} else {
-		printf("    PCIE2: disabled\n");
+		printf("PCIE2: disabled\n");
 	}
 #else
 	setbits_be32(&gur->devdisr, MPC8xxx_DEVDISR_PCIE2);
@@ -153,12 +153,12 @@ void pci_init_board(void)
 	if (pcie_configured && !(devdisr & MPC8xxx_DEVDISR_PCIE3)) {
 		SET_STD_PCIE_INFO(pci_info[num], 3);
 		pcie_ep = fsl_setup_hose(&pcie3_hose, pci_info[num].regs);
-		printf("    PCIE3 connected as %s\n",
+		printf("PCIE3: connected as %s\n",
 			pcie_ep ? "Endpoint" : "Root Complex");
 		first_free_busno = fsl_pci_init_port(&pci_info[num++],
 					&pcie3_hose, first_free_busno);
 	} else {
-		printf("    PCIE3: disabled\n");
+		printf("PCIE3: disabled\n");
 	}
 #else
 	setbits_be32(&gur->devdisr, MPC8xxx_DEVDISR_PCIE3);
diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c
index 45794dabed..21cbb3baaa 100644
--- a/drivers/pci/fsl_pci_init.c
+++ b/drivers/pci/fsl_pci_init.c
@@ -391,11 +391,11 @@ void fsl_pci_init(struct pci_controller *hose, u32 cfg_addr, u32 cfg_data)
 	 * 1 == pci agent or pcie end-point
 	 */
 	if (!temp8) {
-		printf("               Scanning PCI bus %02x\n",
+		printf("           Scanning PCI bus %02x\n",
 			hose->current_busno);
 		hose->last_busno = pci_hose_scan_bus(hose, hose->current_busno);
 	} else {
-		debug("               Not scanning PCI bus %02x. PI=%x\n",
+		debug("           Not scanning PCI bus %02x. PI=%x\n",
 			hose->current_busno, temp8);
 		hose->last_busno = hose->current_busno;
 	}
@@ -482,9 +482,9 @@ int fsl_pci_init_port(struct fsl_pci_info *pci_info,
 	}
 
 	pci_hose_read_config_byte(hose, dev, FSL_PCIE_CAP_ID, &pcie_cap);
-	printf("    PCI%s%x on bus %02x - %02x\n", pcie_cap == PCI_CAP_ID_EXP ?
-			"E" : "", pci_info->pci_num,
-			hose->first_busno, hose->last_busno);
+	printf("PCI%s%x: Bus %02x - %02x\n", pcie_cap == PCI_CAP_ID_EXP ?
+		"E" : "", pci_info->pci_num,
+		hose->first_busno, hose->last_busno);
 
 	return(hose->last_busno + 1);
 }