netstar.h: do not exceed 80 columns

Limit line length to 80 characters mostly by removing obvious and sometimes
misleading comments. Fix indentation, too.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

1 files changed, 31 insertions, 34 deletions

diff --git a/include/configs/netstar.h b/include/configs/netstar.h
index edda3ce56e..c63c84650f 100644
--- a/include/configs/netstar.h
+++ b/include/configs/netstar.h
@@ -27,17 +27,13 @@
 
 #include <configs/omap1510.h>
 
-/*
- * High Level Configuration Options
- * (easy to change)
- */
 #define CONFIG_ARM925T	1		/* This is an arm925t CPU */
 #define CONFIG_OMAP	1		/* in a TI OMAP core */
 #define CONFIG_OMAP1510 1		/* which is in a 5910 */
 
 /* Input clock of PLL */
-#define CONFIG_SYS_CLK_FREQ	150000000	/* 150MHz input clock */
-#define CONFIG_XTAL_FREQ	12000000
+#define CONFIG_SYS_CLK_FREQ		150000000	/* 150MHz */
+#define CONFIG_XTAL_FREQ		12000000	/*  12MHz */
 
 #undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff */
 
@@ -54,10 +50,10 @@
 /*
  * Physical Memory Map
  */
-#define CONFIG_NR_DRAM_BANKS	1		/* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1		0x10000000	/* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE	(64 * 1024 * 1024)
-#define PHYS_FLASH_1		0x00000000	/* Flash Bank #1 */
+#define CONFIG_NR_DRAM_BANKS		1
+#define PHYS_SDRAM_1			0x10000000
+#define PHYS_SDRAM_1_SIZE		(64 * 1024 * 1024)
+#define PHYS_FLASH_1			0x00000000
 
 #define CONFIG_SYS_MONITOR_BASE		PHYS_FLASH_1
 #define CONFIG_SYS_MONITOR_LEN		(256 * 1024)
@@ -66,23 +62,23 @@
  * Environment settings
  */
 #define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_ADDR		0x4000
-#define CONFIG_ENV_SIZE		(8 * 1024)
-#define CONFIG_ENV_SECT_SIZE	(8 * 1024)
-#define CONFIG_ENV_ADDR_REDUND	0x6000
-#define CONFIG_ENV_SIZE_REDUND	CONFIG_ENV_SIZE
+#define CONFIG_ENV_ADDR			0x4000
+#define CONFIG_ENV_SIZE			(8 * 1024)
+#define CONFIG_ENV_SECT_SIZE		(8 * 1024)
+#define CONFIG_ENV_ADDR_REDUND		0x6000
+#define CONFIG_ENV_SIZE_REDUND		CONFIG_ENV_SIZE
 #define CONFIG_ENV_OVERWRITE
 
 /*
  * Size of malloc() pool
  */
-#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_SIZE	128
 #define CONFIG_SYS_MALLOC_LEN		(4 * 1024 * 1024)
 
 /*
  * The stack size is set up in start.S using the settings below
  */
-#define CONFIG_STACKSIZE	(1 * 1024 * 1024)	/* regular stack */
+#define CONFIG_STACKSIZE		(1 * 1024 * 1024)
 
 /*
  * Hardware drivers
@@ -90,8 +86,8 @@
 #define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	(-4)
-#define CONFIG_SYS_NS16550_CLK		(CONFIG_XTAL_FREQ)	/* can be 12M/32Khz or 48Mhz  */
-#define CONFIG_SYS_NS16550_COM1		OMAP1510_UART1_BASE	/* uart1 */
+#define CONFIG_SYS_NS16550_CLK		(CONFIG_XTAL_FREQ)
+#define CONFIG_SYS_NS16550_COM1		OMAP1510_UART1_BASE
 
 #define CONFIG_NET_MULTI
 #define CONFIG_SMC91111
@@ -128,10 +124,10 @@
 /*#define CONFIG_SKIP_LOWLEVEL_INIT */
 
 /*
- * partitions (mtdparts command line support)
+ * Partitions (mtdparts command line support)
  */
 #define CONFIG_CMD_MTDPARTS
-#define CONFIG_MTD_DEVICE		/* needed for mtdparts commands */
+#define CONFIG_MTD_DEVICE
 #define CONFIG_FLASH_CFI_MTD
 #define MTDIDS_DEFAULT		"nor0=physmap-flash.0,nand0=gen_nand.0"
 #define MTDPARTS_DEFAULT	"mtdparts=" \
@@ -139,7 +135,7 @@
 	"gen_nand.0:4M(kernel0),40M(rootfs0),4M(kernel1),40M(rootfs1),-(data)"
 
 /*
- * Command line configuration.
+ * Command line configuration
  */
 #define CONFIG_CMD_BDI
 #define CONFIG_CMD_BOOTD
@@ -204,12 +200,13 @@
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP				/* undef to save memory		*/
-#define CONFIG_SYS_PROMPT		"# "		/* Monitor Command Prompt	*/
-#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_PROMPT		"# "
+#define CONFIG_SYS_CBSIZE		256
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
+	 sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS		16
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
 
 #define CONFIG_SYS_HUSH_PARSER
 #define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
@@ -217,9 +214,9 @@
 
 #define CONFIG_SYS_MEMTEST_START	PHYS_SDRAM_1
 #define CONFIG_SYS_MEMTEST_END		PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE - \
-				(CONFIG_SYS_MONITOR_LEN + CONFIG_SYS_MALLOC_LEN + CONFIG_STACKSIZE)
+	(CONFIG_SYS_MONITOR_LEN + CONFIG_SYS_MALLOC_LEN + CONFIG_STACKSIZE)
 
-#define CONFIG_SYS_LOAD_ADDR		PHYS_SDRAM_1 + 0x400000	/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		(PHYS_SDRAM_1 + 0x400000)
 
 /* The 1510 has 3 timers, they can be driven by the RefClk (12MHz) or by DPLL1.
  * This time is further subdivided by a local divisor.
@@ -228,9 +225,9 @@
 #define CONFIG_SYS_PTV			7
 #define CONFIG_SYS_HZ			1000
 
-#define OMAP5910_DPLL_DIV	1
-#define OMAP5910_DPLL_MUL	((CONFIG_SYS_CLK_FREQ * \
-				 (1 << OMAP5910_DPLL_DIV)) / CONFIG_XTAL_FREQ)
+#define OMAP5910_DPLL_DIV		1
+#define OMAP5910_DPLL_MUL		\
+	((CONFIG_SYS_CLK_FREQ * (1 << OMAP5910_DPLL_DIV)) / CONFIG_XTAL_FREQ)
 
 #define OMAP5910_ARM_PER_DIV	2	/* CKL/4 */
 #define OMAP5910_LCD_DIV	2	/* CKL/4 */
@@ -240,7 +237,7 @@
 #define OMAP5910_DSP_MMU_DIV	1	/* CKL/2 */
 #define OMAP5910_ARM_TIM_SEL	1	/* CKL used for MPU timers */
 
-#define OMAP5910_ARM_EN_CLK	0x03d6	/* 0000 0011 1101 0110b  Clock Enable */
+#define OMAP5910_ARM_EN_CLK	0x03d6	/* 0000 0011 1101 0110b */
 #define OMAP5910_ARM_CKCTL	((OMAP5910_ARM_PER_DIV)  |	\
 				 (OMAP5910_LCD_DIV << 2) |	\
 				 (OMAP5910_ARM_DIV << 4) |	\