Merge branch 'master' of git://git.denx.de/u-boot-arm

53 files changed, 501 insertions, 1207 deletions

diff --git a/board/armltd/integratorap/split_by_variant.sh b/board/armltd/integratorap/split_by_variant.sh
index 51dc53f1bd..2c9fe2e519 100755
--- a/board/armltd/integratorap/split_by_variant.sh
+++ b/board/armltd/integratorap/split_by_variant.sh
@@ -84,8 +84,8 @@ else
 	esac
 fi
 
-if [ "$cpu" = "arm_intcm" ]
-then
+case "$cpu" in
+	arm_intcm)
 	echo "/* Core module undefined/not ported */"	>> tmp.fil
 	echo "#define CONFIG_ARM_INTCM 1"		>> tmp.fil
 	echo -n	"#undef CONFIG_CM_MULTIPLE_SSRAM"	>> tmp.fil
@@ -102,7 +102,19 @@ then
 	echo	"initialization reg */"			>> tmp.fil
 	echo -n	"#undef CONFIG_CM_TCRAM	"		>> tmp.fil
 	echo	" /* CM may not have TCRAM */"		>> tmp.fil
-fi
+	echo -n	" /* May not be processor "		>> tmp.fil
+	echo	"without cache support */"		>> tmp.fil
+	echo	"#define CONFIG_SYS_NO_ICACHE 1"	>> tmp.fil
+	echo	"#define CONFIG_SYS_NO_DCACHE 1"	>> tmp.fil
+	;;
+
+	arm720t)
+	echo -n	" /* May not be processor "		>> tmp.fil
+	echo	"without cache support */"		>> tmp.fil
+	echo	"#define CONFIG_SYS_NO_ICACHE 1"	>> tmp.fil
+	echo	"#define CONFIG_SYS_NO_DCACHE 1"	>> tmp.fil
+	;;
+esac
 
 mkdir -p ${obj}include
 mkdir -p ${obj}board/armltd/integratorap
diff --git a/board/omap3/beagle/beagle.c b/board/omap3/beagle/beagle.c
index 8d6065196f..cc8e2f9a48 100644
--- a/board/omap3/beagle/beagle.c
+++ b/board/omap3/beagle/beagle.c
@@ -38,10 +38,10 @@
 
 static int beagle_revision_c;
 
-/******************************************************************************
+/*
  * Routine: board_init
  * Description: Early hardware init.
- *****************************************************************************/
+ */
 int board_init(void)
 {
 	DECLARE_GLOBAL_DATA_PTR;
@@ -55,23 +55,23 @@ int board_init(void)
 	return 0;
 }
 
-/******************************************************************************
+/*
  * Routine: beagle_get_revision
  * Description: Return revision of the BeagleBoard this code is running on.
  *              If it is a revision Ax/Bx board, this function returns 0,
  *              on a revision C board you will get a 1.
- *****************************************************************************/
+ */
 int beagle_get_revision(void)
 {
 	return beagle_revision_c;
 }
 
-/******************************************************************************
+/*
  * Routine: beagle_identify
  * Description: Detect if we are running on a Beagle revision Ax/Bx or
  *              Cx. This can be done by GPIO_171. If this is low, we are
  *              running on a revision C board.
- *****************************************************************************/
+ */
 void beagle_identify(void)
 {
 	gpio_t *gpio6_base = (gpio_t *)OMAP34XX_GPIO6_BASE;
@@ -92,10 +92,10 @@ void beagle_identify(void)
 	}
 }
 
-/******************************************************************************
+/*
  * Routine: misc_init_r
  * Description: Configure board specific parts
- *****************************************************************************/
+ */
 int misc_init_r(void)
 {
 	gpio_t *gpio5_base = (gpio_t *)OMAP34XX_GPIO5_BASE;
@@ -121,12 +121,12 @@ int misc_init_r(void)
 	return 0;
 }
 
-/******************************************************************************
+/*
  * Routine: set_muxconf_regs
  * Description: Setting up the configuration Mux registers specific to the
  *		hardware. Many pins need to be moved from protect to primary
  *		mode.
- *****************************************************************************/
+ */
 void set_muxconf_regs(void)
 {
 	MUX_BEAGLE();
diff --git a/board/omap3/evm/evm.c b/board/omap3/evm/evm.c
index 3a27c8fe5d..c008c2e4aa 100644
--- a/board/omap3/evm/evm.c
+++ b/board/omap3/evm/evm.c
@@ -36,10 +36,10 @@
 #include <asm/mach-types.h>
 #include "evm.h"
 
-/******************************************************************************
+/*
  * Routine: board_init
  * Description: Early hardware init.
- *****************************************************************************/
+ */
 int board_init(void)
 {
 	DECLARE_GLOBAL_DATA_PTR;
@@ -53,10 +53,10 @@ int board_init(void)
 	return 0;
 }
 
-/******************************************************************************
+/*
  * Routine: misc_init_r
  * Description: Init ethernet (done here so udelay works)
- *****************************************************************************/
+ */
 int misc_init_r(void)
 {
 
@@ -73,22 +73,22 @@ int misc_init_r(void)
 	return 0;
 }
 
-/******************************************************************************
+/*
  * Routine: set_muxconf_regs
  * Description: Setting up the configuration Mux registers specific to the
  *		hardware. Many pins need to be moved from protect to primary
  *		mode.
- *****************************************************************************/
+ */
 void set_muxconf_regs(void)
 {
 	MUX_EVM();
 }
 
-/******************************************************************************
+/*
  * Routine: setup_net_chip
  * Description: Setting up the configuration GPMC registers specific to the
  *		Ethernet hardware.
- *****************************************************************************/
+ */
 static void setup_net_chip(void)
 {
 	gpio_t *gpio3_base = (gpio_t *)OMAP34XX_GPIO3_BASE;
diff --git a/board/omap3/overo/overo.c b/board/omap3/overo/overo.c
index 37bf350e4e..809b77b642 100644
--- a/board/omap3/overo/overo.c
+++ b/board/omap3/overo/overo.c
@@ -35,10 +35,10 @@
 #include <asm/mach-types.h>
 #include "overo.h"
 
-/******************************************************************************
+/*
  * Routine: board_init
  * Description: Early hardware init.
- *****************************************************************************/
+ */
 int board_init(void)
 {
 	DECLARE_GLOBAL_DATA_PTR;
@@ -52,10 +52,10 @@ int board_init(void)
 	return 0;
 }
 
-/******************************************************************************
+/*
  * Routine: misc_init_r
  * Description: Configure board specific parts
- *****************************************************************************/
+ */
 int misc_init_r(void)
 {
 	power_init_r();
@@ -65,12 +65,12 @@ int misc_init_r(void)
 	return 0;
 }
 
-/******************************************************************************
+/*
  * Routine: set_muxconf_regs
  * Description: Setting up the configuration Mux registers specific to the
  *		hardware. Many pins need to be moved from protect to primary
  *		mode.
- *****************************************************************************/
+ */
 void set_muxconf_regs(void)
 {
 	MUX_OVERO();
diff --git a/board/omap3/overo/overo.h b/board/omap3/overo/overo.h
index 71de3f10d3..e8ccc1d2e6 100644
--- a/board/omap3/overo/overo.h
+++ b/board/omap3/overo/overo.h
@@ -185,6 +185,7 @@ const omap3_sysinfo sysinfo = {
  MUX_VAL(CP(CSI2_DX0),		(IEN  | PTD | DIS | M0)) /*CSI2_DX0*/\
  MUX_VAL(CP(CSI2_DY0),		(IEN  | PTD | DIS | M0)) /*CSI2_DY0*/\
  MUX_VAL(CP(CSI2_DX1),		(IEN  | PTD | EN  | M4)) /*GPIO_114*/\
+							 /* - PEN_DOWN*/\
  MUX_VAL(CP(CSI2_DY1),		(IEN  | PTU | EN  | M4)) /*GPIO_115*/\
  /*Audio Interface */\
  MUX_VAL(CP(MCBSP2_FSX),	(IEN  | PTD | DIS | M0)) /*McBSP2_FSX*/\
@@ -295,7 +296,7 @@ const omap3_sysinfo sysinfo = {
  MUX_VAL(CP(SYS_CLKOUT2),	(IEN  | PTU | EN  | M4)) /*GPIO_186*/\
  MUX_VAL(CP(ETK_CLK_ES2),	(IDIS | PTU | EN  | M2)) /*MMC3_CLK*/\
  MUX_VAL(CP(ETK_CTL_ES2),	(IEN  | PTU | EN  | M2)) /*MMC3_CMD*/\
- MUX_VAL(CP(ETK_D0_ES2),	(IEN  | PTU | EN  | M2)) /*MMC3_DAT4*/\
+ MUX_VAL(CP(ETK_D0_ES2),	(IEN  | PTU | EN  | M4)) /*GPIO_14*/\
  MUX_VAL(CP(ETK_D1_ES2),	(IEN  | PTD | EN  | M4)) /*GPIO_15 - X_GATE*/\
  MUX_VAL(CP(ETK_D2_ES2),	(IEN  | PTU | EN  | M4)) /*GPIO_16*/\
 							 /* - W2W_NRESET*/\
@@ -303,9 +304,9 @@ const omap3_sysinfo sysinfo = {
  MUX_VAL(CP(ETK_D4_ES2),	(IEN  | PTU | EN  | M2)) /*MMC3_DAT0*/\
  MUX_VAL(CP(ETK_D5_ES2),	(IEN  | PTU | EN  | M2)) /*MMC3_DAT1*/\
  MUX_VAL(CP(ETK_D6_ES2),	(IEN  | PTU | EN  | M2)) /*MMC3_DAT2*/\
- MUX_VAL(CP(ETK_D7_ES2),	(IEN  | PTU | EN  | M2)) /*MMC3_DAT7*/\
- MUX_VAL(CP(ETK_D8_ES2),	(IEN  | PTU | EN  | M2)) /*MMC3_DAT6*/\
- MUX_VAL(CP(ETK_D9_ES2),	(IEN  | PTU | EN  | M2)) /*MMC3_DAT5*/\
+ MUX_VAL(CP(ETK_D7_ES2),	(IEN  | PTU | EN  | M4)) /*GPIO_21*/\
+ MUX_VAL(CP(ETK_D8_ES2),	(IEN  | PTU | EN  | M4)) /*GPIO_22*/\
+ MUX_VAL(CP(ETK_D9_ES2),	(IEN  | PTU | EN  | M4)) /*GPIO_23*/\
  MUX_VAL(CP(ETK_D10_ES2),	(IDIS | PTD | DIS | M3)) /*HSUSB2_CLK*/\
  MUX_VAL(CP(ETK_D11_ES2),	(IDIS | PTD | DIS | M3)) /*HSUSB2_STP*/\
  MUX_VAL(CP(ETK_D12_ES2),	(IEN  | PTD | DIS | M3)) /*HSUSB2_DIR*/\
diff --git a/board/omap3/pandora/pandora.c b/board/omap3/pandora/pandora.c
index dfd51ecfcb..c2f98ead6a 100644
--- a/board/omap3/pandora/pandora.c
+++ b/board/omap3/pandora/pandora.c
@@ -36,10 +36,10 @@
 #include <asm/mach-types.h>
 #include "pandora.h"
 
-/******************************************************************************
+/*
  * Routine: board_init
  * Description: Early hardware init.
- *****************************************************************************/
+ */
 int board_init(void)
 {
 	DECLARE_GLOBAL_DATA_PTR;
@@ -53,10 +53,10 @@ int board_init(void)
 	return 0;
 }
 
-/******************************************************************************
+/*
  * Routine: misc_init_r
  * Description: Configure board specific parts
- *****************************************************************************/
+ */
 int misc_init_r(void)
 {
 	gpio_t *gpio1_base = (gpio_t *)OMAP34XX_GPIO1_BASE;
@@ -82,12 +82,12 @@ int misc_init_r(void)
 	return 0;
 }
 
-/******************************************************************************
+/*
  * Routine: set_muxconf_regs
  * Description: Setting up the configuration Mux registers specific to the
  *		hardware. Many pins need to be moved from protect to primary
  *		mode.
- *****************************************************************************/
+ */
 void set_muxconf_regs(void)
 {
 	MUX_PANDORA();
diff --git a/board/omap3/zoom1/zoom1.c b/board/omap3/zoom1/zoom1.c
index 702f732753..db4d08709f 100644
--- a/board/omap3/zoom1/zoom1.c
+++ b/board/omap3/zoom1/zoom1.c
@@ -37,10 +37,10 @@
 #include <asm/mach-types.h>
 #include "zoom1.h"
 
-/******************************************************************************
+/*
  * Routine: board_init
  * Description: Early hardware init.
- *****************************************************************************/
+ */
 int board_init(void)
 {
 	DECLARE_GLOBAL_DATA_PTR;
@@ -54,10 +54,10 @@ int board_init(void)
 	return 0;
 }
 
-/******************************************************************************
+/*
  * Routine: misc_init_r
  * Description: Configure zoom board specific configurations
- *****************************************************************************/
+ */
 int misc_init_r(void)
 {
 	power_init_r();
@@ -65,12 +65,12 @@ int misc_init_r(void)
 	return 0;
 }
 
-/******************************************************************************
+/*
  * Routine: set_muxconf_regs
  * Description: Setting up the configuration Mux registers specific to the
  *		hardware. Many pins need to be moved from protect to primary
  *		mode.
- *****************************************************************************/
+ */
 void set_muxconf_regs(void)
 {
 	/* platform specific muxes */
diff --git a/board/samsung/smdk6400/lowlevel_init.S b/board/samsung/smdk6400/lowlevel_init.S
index e0119a771c..47f72f6132 100644
--- a/board/samsung/smdk6400/lowlevel_init.S
+++ b/board/samsung/smdk6400/lowlevel_init.S
@@ -104,6 +104,13 @@ lowlevel_init:
 	bl nand_asm_init
 #endif
 
+	/* Memory subsystem address 0x7e00f120 */
+	ldr	r0, =ELFIN_MEM_SYS_CFG
+
+	/* Xm0CSn2 = NFCON CS0, Xm0CSn3 = NFCON CS1 */
+	mov	r1, #S3C64XX_MEM_SYS_CFG_NAND
+	str	r1, [r0]
+
 	bl	mem_ctrl_asm_init
 
 /* Wakeup support. Don't know if it's going to be used, untested. */
diff --git a/cpu/arm1136/cpu.c b/cpu/arm1136/cpu.c
index 04861632e1..e03a765434 100644
--- a/cpu/arm1136/cpu.c
+++ b/cpu/arm1136/cpu.c
@@ -33,55 +33,13 @@
 
 #include <common.h>
 #include <command.h>
+#include <asm/system.h>
 
 #ifdef CONFIG_USE_IRQ
 DECLARE_GLOBAL_DATA_PTR;
 #endif
 
-/* read co-processor 15, register #1 (control register) */
-static unsigned long read_p15_c1 (void)
-{
-	unsigned long value;
-
-	__asm__ __volatile__(
-				"mrc	p15, 0, %0, c1, c0, 0   @ read control reg\n"
-				: "=r" (value)
-				:
-				: "memory");
-	return value;
-}
-
-/* write to co-processor 15, register #1 (control register) */
-static void write_p15_c1 (unsigned long value)
-{
-	__asm__ __volatile__(
-						"mcr	p15, 0, %0, c1, c0, 0   @ write it back\n"
-						:
-						: "r" (value)
-						: "memory");
-
-	read_p15_c1 ();
-}
-
-static void cp_delay (void)
-{
-	volatile int i;
-
-	/* Many OMAP regs need at least 2 nops  */
-	for (i = 0; i < 100; i++);
-}
-
-/* See also ARM Ref. Man. */
-#define C1_MMU		(1<<0)		/* mmu off/on */
-#define C1_ALIGN	(1<<1)		/* alignment faults off/on */
-#define C1_DC		(1<<2)		/* dcache off/on */
-#define C1_WB		(1<<3)		/* merging write buffer on/off */
-#define C1_BIG_ENDIAN	(1<<7)	/* big endian off/on */
-#define C1_SYS_PROT	(1<<8)		/* system protection */
-#define C1_ROM_PROT	(1<<9)		/* ROM protection */
-#define C1_IC		(1<<12)		/* icache off/on */
-#define C1_HIGH_VECTORS	(1<<13)	/* location of vectors: low/high addresses */
-#define RESERVED_1	(0xf << 3)	/* must be 111b for R/W */
+static void cache_flush(void);
 
 int cpu_init (void)
 {
@@ -104,8 +62,6 @@ int cleanup_before_linux (void)
 	 * we turn off caches etc ...
 	 */
 
-	unsigned long i;
-
 	disable_interrupts ();
 
 #ifdef CONFIG_LCD
@@ -119,44 +75,18 @@ int cleanup_before_linux (void)
 #endif
 
 	/* turn off I/D-cache */
-	asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i));
-	i &= ~(C1_DC | C1_IC);
-	asm ("mcr p15, 0, %0, c1, c0, 0": :"r" (i));
-
+	icache_disable();
+	dcache_disable();
 	/* flush I/D-cache */
-	i = 0;
-	asm ("mcr p15, 0, %0, c7, c7, 0": :"r" (i));  /* invalidate both caches and flush btb */
-	asm ("mcr p15, 0, %0, c7, c10, 4": :"r" (i)); /* mem barrier to sync things */
-	return(0);
-}
-
-int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	disable_interrupts ();
-	reset_cpu (0);
-	/*NOTREACHED*/
-	return(0);
-}
-
-void icache_enable (void)
-{
-	ulong reg;
+	cache_flush();
 
-	reg = read_p15_c1 ();	/* get control reg. */
-	cp_delay ();
-	write_p15_c1 (reg | C1_IC);
+	return 0;
 }
 
-void icache_disable (void)
+static void cache_flush(void)
 {
-	ulong reg;
-
-	reg = read_p15_c1 ();
-	cp_delay ();
-	write_p15_c1 (reg & ~C1_IC);
-}
+	unsigned long i = 0;
 
-int icache_status (void)
-{
-	return(read_p15_c1 () & C1_IC) != 0;
+	asm ("mcr p15, 0, %0, c7, c7, 0": :"r" (i));  /* invalidate both caches and flush btb */
+	asm ("mcr p15, 0, %0, c7, c10, 4": :"r" (i)); /* mem barrier to sync things */
 }
diff --git a/cpu/arm1176/cpu.c b/cpu/arm1176/cpu.c
index 1e94f7d6d0..bfa437835c 100644
--- a/cpu/arm1176/cpu.c
+++ b/cpu/arm1176/cpu.c
@@ -34,55 +34,10 @@
 #include <common.h>
 #include <command.h>
 #include <s3c6400.h>
+#include <asm/system.h>
 
 static void cache_flush (void);
 
-/* read co-processor 15, register #1 (control register) */
-static unsigned long read_p15_c1 (void)
-{
-	unsigned long value;
-
-	__asm__ __volatile__(
-		"mrc	p15, 0, %0, c1, c0, 0   @ read control reg\n"
-		: "=r" (value)
-		:
-		: "memory");
-	return value;
-}
-
-/* write to co-processor 15, register #1 (control register) */
-static void write_p15_c1 (unsigned long value)
-{
-	__asm__ __volatile__(
-		"mcr	p15, 0, %0, c1, c0, 0   @ write it back\n"
-		:
-		: "r" (value)
-		: "memory");
-
-	read_p15_c1();
-}
-
-static void cp_delay (void)
-{
-	volatile int i;
-
-	/* Many OMAP regs need at least 2 nops  */
-	for (i = 0; i < 100; i++)
-		__asm__ __volatile__("nop\n");
-}
-
-/* See also ARM Ref. Man. */
-#define C1_MMU		(1 << 0)	/* mmu off/on */
-#define C1_ALIGN	(1 << 1)	/* alignment faults off/on */
-#define C1_DC		(1 << 2)	/* dcache off/on */
-#define C1_WB		(1 << 3)	/* merging write buffer on/off */
-#define C1_BIG_ENDIAN	(1 << 7)	/* big endian off/on */
-#define C1_SYS_PROT	(1 << 8)	/* system protection */
-#define C1_ROM_PROT	(1 << 9)	/* ROM protection */
-#define C1_IC		(1 << 12)	/* icache off/on */
-#define C1_HIGH_VECTORS	(1 << 13)	/* location of vectors: low/high */
-#define RESERVED_1	(0xf << 3)	/* must be 111b for R/W */
-
 int cpu_init (void)
 {
 	return 0;
@@ -102,6 +57,7 @@ int cleanup_before_linux (void)
 	/* turn off I/D-cache */
 	icache_disable();
 	dcache_disable();
+	/* flush I/D-cache */
 	cache_flush();
 
 	return 0;
@@ -123,61 +79,6 @@ void reset_cpu (ulong ignored)
 	/*NOTREACHED*/
 }
 
-int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	disable_interrupts ();
-	reset_cpu (0);
-	/*NOTREACHED*/
-	return 0;
-}
-
-void icache_enable (void)
-{
-	ulong reg;
-
-	reg = read_p15_c1 ();	/* get control reg. */
-	cp_delay ();
-	write_p15_c1 (reg | C1_IC);
-}
-
-void icache_disable (void)
-{
-	ulong reg;
-
-	reg = read_p15_c1 ();
-	cp_delay ();
-	write_p15_c1 (reg & ~C1_IC);
-}
-
-int icache_status (void)
-{
-	return (read_p15_c1 () & C1_IC) != 0;
-}
-
-/* It makes no sense to use the dcache if the MMU is not enabled */
-void dcache_enable (void)
-{
-	ulong reg;
-
-	reg = read_p15_c1 ();
-	cp_delay ();
-	write_p15_c1 (reg | C1_DC);
-}
-
-void dcache_disable (void)
-{
-	ulong reg;
-
-	reg = read_p15_c1 ();
-	cp_delay ();
-	write_p15_c1 (reg & ~C1_DC);
-}
-
-int dcache_status (void)
-{
-	return (read_p15_c1 () & C1_DC) != 0;
-}
-
 /* flush I/D-cache */
 static void cache_flush (void)
 {
diff --git a/cpu/arm1176/s3c64xx/cpu_init.S b/cpu/arm1176/s3c64xx/cpu_init.S
index 08bda99fdc..32bb467f2f 100644
--- a/cpu/arm1176/s3c64xx/cpu_init.S
+++ b/cpu/arm1176/s3c64xx/cpu_init.S
@@ -28,13 +28,6 @@
 
 	.globl mem_ctrl_asm_init
 mem_ctrl_asm_init:
-	/* Memory subsystem address 0x7e00f120 */
-	ldr	r0, =ELFIN_MEM_SYS_CFG
-
-	/* Xm0CSn2 = NFCON CS0, Xm0CSn3 = NFCON CS1 */
-	mov	r1, #0xd
-	str	r1, [r0]
-
 	/* DMC1 base address 0x7e001000 */
 	ldr	r0, =ELFIN_DMC1_BASE
 
diff --git a/cpu/arm720t/cpu.c b/cpu/arm720t/cpu.c
index 8166982e6a..6c40903b7d 100644
--- a/cpu/arm720t/cpu.c
+++ b/cpu/arm720t/cpu.c
@@ -34,6 +34,11 @@
 #include <command.h>
 #include <clps7111.h>
 #include <asm/hardware.h>
+#include <asm/system.h>
+
+#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_ARMADILLO)
+static void cache_flush(void);
+#endif
 
 int cpu_init (void)
 {
@@ -58,17 +63,14 @@ int cleanup_before_linux (void)
 	 */
 
 #if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_ARMADILLO)
-	unsigned long i;
-
 	disable_interrupts ();
 
 	/* turn off I-cache */
-	asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i));
-	i &= ~0x1000;
-	asm ("mcr p15, 0, %0, c1, c0, 0": :"r" (i));
+	icache_disable();
+	dcache_disable();
 
 	/* flush I-cache */
-	asm ("mcr p15, 0, %0, c7, c5, 0": :"r" (i));
+	cache_flush();
 #ifdef CONFIG_ARM7_REVD
 	/* go to high speed */
 	IO_SYSCON3 = (IO_SYSCON3 & ~CLKCTL) | CLKCTL_73;
@@ -84,109 +86,13 @@ int cleanup_before_linux (void)
 	return 0;
 }
 
-int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	disable_interrupts ();
-	reset_cpu (0);
-	/*NOTREACHED*/
-	return (0);
-}
-
-/*
- * Instruction and Data cache enable and disable functions
- *
- */
-
-#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_NETARM) || defined(CONFIG_ARMADILLO)
-/* read co-processor 15, register #1 (control register) */
-static unsigned long read_p15_c1(void)
-{
-	unsigned long value;
-
-	__asm__ __volatile__(
-		"mrc     p15, 0, %0, c1, c0, 0   @ read control reg\n"
-		: "=r" (value)
-		:
-		: "memory");
-	/* printf("p15/c1 is = %08lx\n", value); */
-	return value;
-}
-
-/* write to co-processor 15, register #1 (control register) */
-static void write_p15_c1(unsigned long value)
-{
-	/* printf("write %08lx to p15/c1\n", value); */
-	__asm__ __volatile__(
-		"mcr     p15, 0, %0, c1, c0, 0   @ write it back\n"
-		:
-		: "r" (value)
-		: "memory");
-
-	read_p15_c1();
-}
-
-static void cp_delay (void)
-{
-	volatile int i;
-
-	/* copro seems to need some delay between reading and writing */
-	for (i = 0; i < 100; i++);
-}
-
-/* See also ARM Ref. Man. */
-#define C1_MMU		(1<<0)	/* mmu off/on */
-#define C1_ALIGN	(1<<1)	/* alignment faults off/on */
-#define C1_IDC		(1<<2)	/* icache and/or dcache off/on */
-#define C1_WRITE_BUFFER	(1<<3)	/* write buffer off/on */
-#define C1_BIG_ENDIAN	(1<<7)	/* big endian off/on */
-#define C1_SYS_PROT	(1<<8)	/* system protection */
-#define C1_ROM_PROT	(1<<9)	/* ROM protection */
-#define C1_HIGH_VECTORS	(1<<13)	/* location of vectors: low/high addresses */
-
-void icache_enable (void)
-{
-	ulong reg;
-
-	reg = read_p15_c1 ();
-	cp_delay ();
-	write_p15_c1 (reg | C1_IDC);
-}
-
-void icache_disable (void)
-{
-	ulong reg;
-
-	reg = read_p15_c1 ();
-	cp_delay ();
-	write_p15_c1 (reg & ~C1_IDC);
-}
-
-int icache_status (void)
-{
-	return (read_p15_c1 () & C1_IDC) != 0;
-}
-
-void dcache_enable (void)
-{
-	ulong reg;
-
-	reg = read_p15_c1 ();
-	cp_delay ();
-	write_p15_c1 (reg | C1_IDC);
-}
-
-void dcache_disable (void)
+#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_ARMADILLO)
+/* flush I/D-cache */
+static void cache_flush (void)
 {
-	ulong reg;
-
-	reg = read_p15_c1 ();
-	cp_delay ();
-	write_p15_c1 (reg & ~C1_IDC);
-}
+	unsigned long i = 0;
 
-int dcache_status (void)
-{
-	return (read_p15_c1 () & C1_IDC) != 0;
+	asm ("mcr p15, 0, %0, c7, c5, 0": :"r" (i));
 }
 #elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR)
 	/* No specific cache setup for IntegratorAP/CM720T as yet */
diff --git a/cpu/arm920t/cpu.c b/cpu/arm920t/cpu.c
index 1b9cde62fa..87c1adc591 100644
--- a/cpu/arm920t/cpu.c
+++ b/cpu/arm920t/cpu.c
@@ -32,62 +32,13 @@
 #include <common.h>
 #include <command.h>
 #include <arm920t.h>
+#include <asm/system.h>
 
 #ifdef CONFIG_USE_IRQ
 DECLARE_GLOBAL_DATA_PTR;
 #endif
 
-/* read co-processor 15, register #1 (control register) */
-static unsigned long read_p15_c1 (void)
-{
-	unsigned long value;
-
-	__asm__ __volatile__(
-		"mrc	p15, 0, %0, c1, c0, 0   @ read control reg\n"
-		: "=r" (value)
-		:
-		: "memory");
-
-#ifdef MMU_DEBUG
-	printf ("p15/c1 is = %08lx\n", value);
-#endif
-	return value;
-}
-
-/* write to co-processor 15, register #1 (control register) */
-static void write_p15_c1 (unsigned long value)
-{
-#ifdef MMU_DEBUG
-	printf ("write %08lx to p15/c1\n", value);
-#endif
-	__asm__ __volatile__(
-		"mcr	p15, 0, %0, c1, c0, 0   @ write it back\n"
-		:
-		: "r" (value)
-		: "memory");
-
-	read_p15_c1 ();
-}
-
-static void cp_delay (void)
-{
-	volatile int i;
-
-	/* copro seems to need some delay between reading and writing */
-	for (i = 0; i < 100; i++);
-}
-
-/* See also ARM920T    Technical reference Manual */
-#define C1_MMU		(1<<0)		/* mmu off/on */
-#define C1_ALIGN	(1<<1)		/* alignment faults off/on */
-#define C1_DC		(1<<2)		/* dcache off/on */
-
-#define C1_BIG_ENDIAN	(1<<7)		/* big endian off/on */
-#define C1_SYS_PROT	(1<<8)		/* system protection */
-#define C1_ROM_PROT	(1<<9)		/* ROM protection */
-#define C1_IC		(1<<12)		/* icache off/on */
-#define C1_HIGH_VECTORS	(1<<13)		/* location of vectors: low/high addresses */
-
+static void cache_flush(void);
 
 int cpu_init (void)
 {
@@ -110,76 +61,21 @@ int cleanup_before_linux (void)
 	 * we turn off caches etc ...
 	 */
 
-	unsigned long i;
-
 	disable_interrupts ();
 
 	/* turn off I/D-cache */
-	asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i));
-	i &= ~(C1_DC | C1_IC);
-	asm ("mcr p15, 0, %0, c1, c0, 0": :"r" (i));
-
+	icache_disable();
+	dcache_disable();
 	/* flush I/D-cache */
-	i = 0;
-	asm ("mcr p15, 0, %0, c7, c7, 0": :"r" (i));
+	cache_flush();
 
-	return (0);
-}
-
-int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	disable_interrupts ();
-	reset_cpu (0);
-	/*NOTREACHED*/
-	return (0);
-}
-
-void icache_enable (void)
-{
-	ulong reg;
-
-	reg = read_p15_c1 ();		/* get control reg. */
-	cp_delay ();
-	write_p15_c1 (reg | C1_IC);
-}
-
-void icache_disable (void)
-{
-	ulong reg;
-
-	reg = read_p15_c1 ();
-	cp_delay ();
-	write_p15_c1 (reg & ~C1_IC);
-}
-
-int icache_status (void)
-{
-	return (read_p15_c1 () & C1_IC) != 0;
-}
-
-#ifdef USE_920T_MMU
-/* It makes no sense to use the dcache if the MMU is not enabled */
-void dcache_enable (void)
-{
-	ulong reg;
-
-	reg = read_p15_c1 ();
-	cp_delay ();
-	write_p15_c1 (reg | C1_DC);
+	return 0;
 }
 
-void dcache_disable (void)
+/* flush I/D-cache */
+static void cache_flush (void)
 {
-	ulong reg;
+	unsigned long i = 0;
 
-	reg = read_p15_c1 ();
-	cp_delay ();
-	reg &= ~C1_DC;
-	write_p15_c1 (reg);
-}
-
-int dcache_status (void)
-{
-	return (read_p15_c1 () & C1_DC) != 0;
+	asm ("mcr p15, 0, %0, c7, c7, 0": :"r" (i));
 }
-#endif
diff --git a/cpu/arm925t/cpu.c b/cpu/arm925t/cpu.c
index b9f09318ad..cf6a489101 100644
--- a/cpu/arm925t/cpu.c
+++ b/cpu/arm925t/cpu.c
@@ -32,62 +32,13 @@
 #include <common.h>
 #include <command.h>
 #include <arm925t.h>
+#include <asm/system.h>
 
 #ifdef CONFIG_USE_IRQ
 DECLARE_GLOBAL_DATA_PTR;
 #endif
 
-/* read co-processor 15, register #1 (control register) */
-static unsigned long read_p15_c1 (void)
-{
-	unsigned long value;
-
-	__asm__ __volatile__(
-		"mrc	p15, 0, %0, c1, c0, 0   @ read control reg\n"
-		: "=r" (value)
-		:
-		: "memory");
-
-#ifdef MMU_DEBUG
-	printf ("p15/c1 is = %08lx\n", value);
-#endif
-	return value;
-}
-
-/* write to co-processor 15, register #1 (control register) */
-static void write_p15_c1 (unsigned long value)
-{
-#ifdef MMU_DEBUG
-	printf ("write %08lx to p15/c1\n", value);
-#endif
-	__asm__ __volatile__(
-		"mcr	p15, 0, %0, c1, c0, 0   @ write it back\n"
-		:
-		: "r" (value)
-		: "memory");
-
-	read_p15_c1 ();
-}
-
-static void cp_delay (void)
-{
-	volatile int i;
-
-	/* Many OMAP regs need at least 2 nops  */
-	for (i = 0; i < 100; i++);
-}
-
-/* See also ARM Ref. Man. */
-#define C1_MMU		(1<<0)		/* mmu off/on */
-#define C1_ALIGN	(1<<1)		/* alignment faults off/on */
-#define C1_DC		(1<<2)		/* dcache off/on */
-#define C1_WB		(1<<3)		/* merging write buffer on/off */
-#define C1_BIG_ENDIAN	(1<<7)	/* big endian off/on */
-#define C1_SYS_PROT	(1<<8)		/* system protection */
-#define C1_ROM_PROT	(1<<9)		/* ROM protection */
-#define C1_IC		(1<<12)		/* icache off/on */
-#define C1_HIGH_VECTORS	(1<<13)	/* location of vectors: low/high addresses */
-#define RESERVED_1	(0xf << 3)	/* must be 111b for R/W */
+static void cache_flush(void);
 
 int cpu_init (void)
 {
@@ -110,48 +61,23 @@ int cleanup_before_linux (void)
 	 * we turn off caches etc ...
 	 */
 
-	unsigned long i;
-
 	disable_interrupts ();
 
-	/* turn off I/D-cache */
-	asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i));
-	i &= ~(C1_DC | C1_IC);
-	asm ("mcr p15, 0, %0, c1, c0, 0": :"r" (i));
 
+	/* turn off I/D-cache */
+	icache_disable();
+	dcache_disable();
 	/* flush I/D-cache */
-	i = 0;
-	asm ("mcr p15, 0, %0, c7, c7, 0": :"r" (i));
-	return (0);
-}
+	cache_flush();
 
-int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	disable_interrupts ();
-	reset_cpu (0);
-	/*NOTREACHED*/
-	return (0);
-}
-
-void icache_enable (void)
-{
-	ulong reg;
-
-	reg = read_p15_c1 ();		/* get control reg. */
-	cp_delay ();
-	write_p15_c1 (reg | C1_IC);
+	return 0;
 }
 
-void icache_disable (void)
+/* flush I/D-cache */
+static void cache_flush (void)
 {
-	ulong reg;
+	unsigned long i = 0;
 
-	reg = read_p15_c1 ();
-	cp_delay ();
-	write_p15_c1 (reg & ~C1_IC);
+	asm ("mcr p15, 0, %0, c7, c7, 0": :"r" (i));
 }
 
-int icache_status (void)
-{
-	return (read_p15_c1 () & C1_IC) != 0;
-}
diff --git a/cpu/arm926ejs/cpu.c b/cpu/arm926ejs/cpu.c
index 48a2c0bf21..6307e3389d 100644
--- a/cpu/arm926ejs/cpu.c
+++ b/cpu/arm926ejs/cpu.c
@@ -32,62 +32,13 @@
 #include <common.h>
 #include <command.h>
 #include <arm926ejs.h>
+#include <asm/system.h>
 
 #ifdef CONFIG_USE_IRQ
 DECLARE_GLOBAL_DATA_PTR;
 #endif
 
-/* read co-processor 15, register #1 (control register) */
-static unsigned long read_p15_c1 (void)
-{
-	unsigned long value;
-
-	__asm__ __volatile__(
-		"mrc	p15, 0, %0, c1, c0, 0   @ read control reg\n"
-		: "=r" (value)
-		:
-		: "memory");
-
-#ifdef MMU_DEBUG
-	printf ("p15/c1 is = %08lx\n", value);
-#endif
-	return value;
-}
-
-/* write to co-processor 15, register #1 (control register) */
-static void write_p15_c1 (unsigned long value)
-{
-#ifdef MMU_DEBUG
-	printf ("write %08lx to p15/c1\n", value);
-#endif
-	__asm__ __volatile__(
-		"mcr	p15, 0, %0, c1, c0, 0   @ write it back\n"
-		:
-		: "r" (value)
-		: "memory");
-
-	read_p15_c1 ();
-}
-
-static void cp_delay (void)
-{
-	volatile int i;
-
-	/* copro seems to need some delay between reading and writing */
-	for (i = 0; i < 100; i++);
-}
-
-/* See also ARM926EJ-S Technical Reference Manual */
-#define C1_MMU		(1<<0)		/* mmu off/on */
-#define C1_ALIGN	(1<<1)		/* alignment faults off/on */
-#define C1_DC		(1<<2)		/* dcache off/on */
-
-#define C1_BIG_ENDIAN	(1<<7)		/* big endian off/on */
-#define C1_SYS_PROT	(1<<8)		/* system protection */
-#define C1_ROM_PROT	(1<<9)		/* ROM protection */
-#define C1_IC		(1<<12)		/* icache off/on */
-#define C1_HIGH_VECTORS	(1<<13)		/* location of vectors: low/high addresses */
-
+static void cache_flush(void);
 
 int cpu_init (void)
 {
@@ -110,76 +61,22 @@ int cleanup_before_linux (void)
 	 * we turn off caches etc ...
 	 */
 
-	unsigned long i;
-
 	disable_interrupts ();
 
-	/* turn off I/D-cache */
-	asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i));
-	i &= ~(C1_DC | C1_IC);
-	asm ("mcr p15, 0, %0, c1, c0, 0": :"r" (i));
 
+	/* turn off I/D-cache */
+	icache_disable();
+	dcache_disable();
 	/* flush I/D-cache */
-	i = 0;
-	asm ("mcr p15, 0, %0, c7, c7, 0": :"r" (i));
-
-	return (0);
-}
+	cache_flush();
 
-int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	disable_interrupts ();
-	reset_cpu (0);
-	/*NOTREACHED*/
-	return (0);
-}
-
-/* cache_bit must be either C1_IC or C1_DC */
-static void cache_enable(uint32_t cache_bit)
-{
-	uint32_t reg;
-
-	reg = read_p15_c1();	/* get control reg. */
-	cp_delay();
-	write_p15_c1(reg | cache_bit);
-}
-
-/* cache_bit must be either C1_IC or C1_DC */
-static void cache_disable(uint32_t cache_bit)
-{
-	uint32_t reg;
-
-	reg = read_p15_c1();
-	cp_delay();
-	write_p15_c1(reg & ~cache_bit);
-}
-
-void icache_enable(void)
-{
-	cache_enable(C1_IC);
-}
-
-void icache_disable(void)
-{
-	cache_disable(C1_IC);
-}
-
-int icache_status(void)
-{
-	return (read_p15_c1() & C1_IC) != 0;
-}
-
-void dcache_enable(void)
-{
-	cache_enable(C1_DC);
+	return 0;
 }
 
-void dcache_disable(void)
+/* flush I/D-cache */
+static void cache_flush (void)
 {
-	cache_disable(C1_DC);
-}
+	unsigned long i = 0;
 
-int dcache_status(void)
-{
-	return (read_p15_c1() & C1_DC) != 0;
+	asm ("mcr p15, 0, %0, c7, c7, 0": :"r" (i));
 }
diff --git a/cpu/arm946es/cpu.c b/cpu/arm946es/cpu.c
index 44c589aef9..ef7995d609 100644
--- a/cpu/arm946es/cpu.c
+++ b/cpu/arm946es/cpu.c
@@ -32,62 +32,13 @@
 #include <common.h>
 #include <command.h>
 #include <arm946es.h>
+#include <asm/system.h>
 
 #ifdef CONFIG_USE_IRQ
 DECLARE_GLOBAL_DATA_PTR;
 #endif
 
-/* read co-processor 15, register #1 (control register) */
-static unsigned long read_p15_c1 (void)
-{
-	unsigned long value;
-
-	__asm__ __volatile__(
-		"mrc	p15, 0, %0, c1, c0, 0	@ read control reg\n"
-		: "=r" (value)
-		:
-		: "memory");
-
-#ifdef MMU_DEBUG
-	printf ("p15/c1 is = %08lx\n", value);
-#endif
-	return value;
-}
-
-/* write to co-processor 15, register #1 (control register) */
-static void write_p15_c1 (unsigned long value)
-{
-#ifdef MMU_DEBUG
-	printf ("write %08lx to p15/c1\n", value);
-#endif
-	__asm__ __volatile__(
-		"mcr	p15, 0, %0, c1, c0, 0	@ write it back\n"
-		:
-		: "r" (value)
-		: "memory");
-
-	read_p15_c1 ();
-}
-
-static void cp_delay (void)
-{
-	volatile int i;
-
-	/* copro seems to need some delay between reading and writing */
-	for (i = 0; i < 100; i++);
-}
-
-/* See also ARM946E-S  Technical Reference Manual */
-#define C1_MMU		(1<<0)		/* mmu off/on */
-#define C1_ALIGN	(1<<1)		/* alignment faults off/on */
-#define C1_DC		(1<<2)		/* dcache off/on */
-
-#define C1_BIG_ENDIAN	(1<<7)		/* big endian off/on */
-#define C1_SYS_PROT	(1<<8)		/* system protection */
-#define C1_ROM_PROT	(1<<9)		/* ROM protection */
-#define C1_IC		(1<<12)		/* icache off/on */
-#define C1_HIGH_VECTORS (1<<13)		/* location of vectors: low/high addresses */
-
+static void cache_flush(void);
 
 int cpu_init (void)
 {
@@ -110,8 +61,6 @@ int cleanup_before_linux (void)
 	 * we turn off caches etc ...
 	 */
 
-	unsigned long i;
-
 	disable_interrupts ();
 
 	/* ARM926E-S needs the protection unit enabled for the icache to have
@@ -119,47 +68,19 @@ int cleanup_before_linux (void)
 	 * should turn off the protection unit as well....
 	 */
 	/* turn off I/D-cache */
-	asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i));
-	i &= ~(C1_DC | C1_IC);
-	asm ("mcr p15, 0, %0, c1, c0, 0": :"r" (i));
-
+	icache_disable();
+	dcache_disable();
 	/* flush I/D-cache */
-	i = 0;
-	asm ("mcr p15, 0, %0, c7, c5, 0": :"r" (i));
-	asm ("mcr p15, 0, %0, c7, c6, 0": :"r" (i));
-	return (0);
-}
+	cache_flush();
 
-int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	extern void reset_cpu (ulong addr);
-
-	disable_interrupts ();
-	reset_cpu (0);
-	/*NOTREACHED*/
-	return (0);
-}
-/* ARM926E-S needs the protection unit enabled for this to have any effect
-   - left for possible later use */
-void icache_enable (void)
-{
-	ulong reg;
-
-	reg = read_p15_c1 ();		/* get control reg. */
-	cp_delay ();
-	write_p15_c1 (reg | C1_IC);
+	return 0;
 }
 
-void icache_disable (void)
+/* flush I/D-cache */
+static void cache_flush (void)
 {
-	ulong reg;
-
-	reg = read_p15_c1 ();
-	cp_delay ();
-	write_p15_c1 (reg & ~C1_IC);
-}
+	unsigned long i = 0;
 
-int icache_status (void)
-{
-	return (read_p15_c1 () & C1_IC) != 0;
+	asm ("mcr p15, 0, %0, c7, c5, 0": :"r" (i));
+	asm ("mcr p15, 0, %0, c7, c6, 0": :"r" (i));
 }
diff --git a/cpu/arm_cortexa8/cpu.c b/cpu/arm_cortexa8/cpu.c
index ad2085b010..5e7b935e4b 100644
--- a/cpu/arm_cortexa8/cpu.c
+++ b/cpu/arm_cortexa8/cpu.c
@@ -34,6 +34,7 @@
 #include <common.h>
 #include <command.h>
 #include <asm/arch/sys_proto.h>
+#include <asm/system.h>
 
 #ifdef CONFIG_USE_IRQ
 DECLARE_GLOBAL_DATA_PTR;
@@ -45,46 +46,6 @@ void l2cache_disable(void);
 
 static void cache_flush(void);
 
-/* read co-processor 15, register #1 (control register) */
-static unsigned long read_p15_c1(void)
-{
-	unsigned long value;
-
-	__asm__ __volatile__("mrc p15, 0, %0, c1, c0, 0\
-			     @ read control reg\n":"=r"(value)
-			     ::"memory");
-	return value;
-}
-
-/* write to co-processor 15, register #1 (control register) */
-static void write_p15_c1(unsigned long value)
-{
-	__asm__ __volatile__("mcr p15, 0, %0, c1, c0, 0\
-			     @ write it back\n"::"r"(value)
-			     : "memory");
-
-	read_p15_c1();
-}
-
-static void cp_delay(void)
-{
-	/* Many OMAP regs need at least 2 nops */
-	asm("nop");
-	asm("nop");
-}
-
-/* See also ARM Ref. Man. */
-#define C1_MMU		(1<<0)	/* mmu off/on */
-#define C1_ALIGN	(1<<1)	/* alignment faults off/on */
-#define C1_DC		(1<<2)	/* dcache off/on */
-#define C1_WB		(1<<3)	/* merging write buffer on/off */
-#define C1_BIG_ENDIAN	(1<<7)	/* big endian off/on */
-#define C1_SYS_PROT	(1<<8)	/* system protection */
-#define C1_ROM_PROT	(1<<9)	/* ROM protection */
-#define C1_IC		(1<<12)	/* icache off/on */
-#define C1_HIGH_VECTORS	(1<<13)	/* location of vectors: low/high addresses */
-#define RESERVED_1	(0xf << 3)	/* must be 111b for R/W */
-
 int cpu_init(void)
 {
 	/*
@@ -134,42 +95,6 @@ int cleanup_before_linux(void)
 	return 0;
 }
 
-int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	disable_interrupts();
-	reset_cpu(0);
-
-	/* NOTREACHED */
-	return 0;
-}
-
-void icache_enable(void)
-{
-	ulong reg;
-
-	reg = read_p15_c1();	/* get control reg. */
-	cp_delay();
-	write_p15_c1(reg | C1_IC);
-}
-
-void icache_disable(void)
-{
-	ulong reg;
-
-	reg = read_p15_c1();
-	cp_delay();
-	write_p15_c1(reg & ~C1_IC);
-}
-
-void dcache_disable (void)
-{
-	ulong reg;
-
-	reg = read_p15_c1 ();
-	cp_delay ();
-	write_p15_c1 (reg & ~C1_DC);
-}
-
 void l2cache_enable()
 {
 	unsigned long i;
@@ -229,11 +154,6 @@ void l2cache_disable()
 	}
 }
 
-int icache_status(void)
-{
-	return (read_p15_c1() & C1_IC) != 0;
-}
-
 static void cache_flush(void)
 {
 	asm ("mcr p15, 0, %0, c7, c5, 0": :"r" (0));
diff --git a/cpu/arm_cortexa8/omap3/board.c b/cpu/arm_cortexa8/omap3/board.c
index 7bb3e284b5..15ea936b40 100644
--- a/cpu/arm_cortexa8/omap3/board.c
+++ b/cpu/arm_cortexa8/omap3/board.c
@@ -331,7 +331,7 @@ static int do_switch_ecc(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 	return 0;
 
 usage:
-	printf ("Usage: nandecc %s\n", cmdtp->help);
+	printf ("Usage: nandecc %s\n", cmdtp->usage);
 	return 1;
 }
 
diff --git a/cpu/arm_intcm/cpu.c b/cpu/arm_intcm/cpu.c
index ccf7fd5b64..1636ffb1ff 100644
--- a/cpu/arm_intcm/cpu.c
+++ b/cpu/arm_intcm/cpu.c
@@ -66,28 +66,3 @@ int cleanup_before_linux (void)
 
 	return (0);
 }
-
-int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	extern void reset_cpu (ulong addr);
-
-	disable_interrupts ();
-	reset_cpu (0);
-	/*NOTREACHED*/
-	return (0);
-}
-
-/* May not be cahed processor on the CM - do nothing */
-void icache_enable (void)
-{
-}
-
-void icache_disable (void)
-{
-}
-
-/* return "disabled" */
-int icache_status (void)
-{
-	return 0;
-}
diff --git a/cpu/ixp/cpu.c b/cpu/ixp/cpu.c
index fd545b5a25..42c62f6e39 100644
--- a/cpu/ixp/cpu.c
+++ b/cpu/ixp/cpu.c
@@ -34,6 +34,7 @@
 #include <command.h>
 #include <netdev.h>
 #include <asm/arch/ixp425.h>
+#include <asm/system.h>
 
 ulong loops_per_jiffy;
 
@@ -41,6 +42,8 @@ ulong loops_per_jiffy;
 DECLARE_GLOBAL_DATA_PTR;
 #endif
 
+static void cache_flush(void);
+
 #if defined(CONFIG_DISPLAY_CPUINFO)
 int print_cpuinfo (void)
 {
@@ -98,92 +101,26 @@ int cleanup_before_linux (void)
 	 * just disable everything that can disturb booting linux
 	 */
 
-	unsigned long i;
-
 	disable_interrupts ();
 
 	/* turn off I-cache */
-	asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i));
-	i &= ~0x1000;
-	asm ("mcr p15, 0, %0, c1, c0, 0": :"r" (i));
+	icache_disable();
+	dcache_disable();
 
 	/* flush I-cache */
-	asm ("mcr p15, 0, %0, c7, c5, 0": :"r" (i));
-
-	return (0);
-}
-
-int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	printf ("resetting ...\n");
-
-	udelay (50000);				/* wait 50 ms */
-	disable_interrupts ();
-	reset_cpu (0);
+	cache_flush();
 
-	/*NOTREACHED*/
-	return (0);
-}
-
-/* taken from blob */
-void icache_enable (void)
-{
-	register u32 i;
-
-	/* read control register */
-	asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i));
-
-	/* set i-cache */
-	i |= 0x1000;
-
-	/* write back to control register */
-	asm ("mcr p15, 0, %0, c1, c0, 0": :"r" (i));
+	return 0;
 }
 
-void icache_disable (void)
+/* flush I/D-cache */
+static void cache_flush (void)
 {
-	register u32 i;
-
-	/* read control register */
-	asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i));
-
-	/* clear i-cache */
-	i &= ~0x1000;
+	unsigned long i = 0;
 
-	/* write back to control register */
-	asm ("mcr p15, 0, %0, c1, c0, 0": :"r" (i));
-
-	/* flush i-cache */
 	asm ("mcr p15, 0, %0, c7, c5, 0": :"r" (i));
 }
 
-int icache_status (void)
-{
-	register u32 i;
-
-	/* read control register */
-	asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i));
-
-	/* return bit */
-	return (i & 0x1000);
-}
-
-/* we will never enable dcache, because we have to setup MMU first */
-void dcache_enable (void)
-{
-	return;
-}
-
-void dcache_disable (void)
-{
-	return;
-}
-
-int dcache_status (void)
-{
-	return 0;					/* always off */
-}
-
 /* FIXME */
 /*
 void pci_init(void)
diff --git a/cpu/lh7a40x/cpu.c b/cpu/lh7a40x/cpu.c
index 8ff3a36821..93ebd13234 100644
--- a/cpu/lh7a40x/cpu.c
+++ b/cpu/lh7a40x/cpu.c
@@ -32,61 +32,13 @@
 #include <common.h>
 #include <command.h>
 #include <arm920t.h>
+#include <asm/system.h>
 
 #ifdef CONFIG_USE_IRQ
 DECLARE_GLOBAL_DATA_PTR;
 #endif
 
-/* read co-processor 15, register #1 (control register) */
-static unsigned long read_p15_c1 (void)
-{
-	unsigned long value;
-
-	__asm__ __volatile__(
-		"mrc     p15, 0, %0, c1, c0, 0   @ read control reg\n"
-		: "=r" (value)
-		:
-		: "memory");
-
-#ifdef MMU_DEBUG
-	printf ("p15/c1 is = %08lx\n", value);
-#endif
-	return value;
-}
-
-/* write to co-processor 15, register #1 (control register) */
-static void write_p15_c1 (unsigned long value)
-{
-#ifdef MMU_DEBUG
-	printf ("write %08lx to p15/c1\n", value);
-#endif
-	__asm__ __volatile__(
-		"mcr     p15, 0, %0, c1, c0, 0   @ write it back\n"
-		:
-		: "r" (value)
-		: "memory");
-
-	read_p15_c1 ();
-}
-
-static void cp_delay (void)
-{
-	volatile int i;
-
-	/* copro seems to need some delay between reading and writing */
-	for (i = 0; i < 100; i++);
-}
-
-/* See also ARM Ref. Man. */
-#define C1_MMU		(1<<0)		/* mmu off/on */
-#define C1_ALIGN	(1<<1)		/* alignment faults off/on */
-#define C1_DC		(1<<2)		/* dcache off/on */
-#define C1_BIG_ENDIAN	(1<<7)	/* big endian off/on */
-#define C1_SYS_PROT	(1<<8)		/* system protection */
-#define C1_ROM_PROT	(1<<9)		/* ROM protection */
-#define C1_IC		(1<<12)		/* icache off/on */
-#define C1_HIGH_VECTORS	(1<<13)	/* location of vectors: low/high addresses */
-#define RESERVED_1	(0xf << 3)	/* must be 111b for R/W */
+static void cache_flush(void);
 
 int cpu_init (void)
 {
@@ -109,75 +61,22 @@ int cleanup_before_linux (void)
 	 * we turn off caches etc ...
 	 */
 
-	unsigned long i;
-
 	disable_interrupts ();
 
 	/* turn off I/D-cache */
-	asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i));
-	i &= ~(C1_DC | C1_IC);
-	asm ("mcr p15, 0, %0, c1, c0, 0": :"r" (i));
+	icache_disable();
+	dcache_disable();
 
 	/* flush I/D-cache */
-	i = 0;
-	asm ("mcr p15, 0, %0, c7, c7, 0": :"r" (i));
-	return (0);
-}
+	cache_flush();
 
-int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	disable_interrupts ();
-	reset_cpu (0);
-	/*NOTREACHED*/
-	return (0);
-}
-
-void icache_enable (void)
-{
-	ulong reg;
-
-	reg = read_p15_c1 ();
-	cp_delay ();
-	write_p15_c1 (reg | C1_IC);
-}
-
-void icache_disable (void)
-{
-	ulong reg;
-
-	reg = read_p15_c1 ();
-	cp_delay ();
-	write_p15_c1 (reg & ~C1_IC);
-}
-
-int icache_status (void)
-{
-	return (read_p15_c1 () & C1_IC) != 0;
-}
-
-#ifdef USE_920T_MMU
-/* It makes no sense to use the dcache if the MMU is not enabled */
-void dcache_enable (void)
-{
-	ulong reg;
-
-	reg = read_p15_c1 ();
-	cp_delay ();
-	write_p15_c1 (reg | C1_DC);
+	return 0;
 }
 
-void dcache_disable (void)
+/* flush I/D-cache */
+static void cache_flush (void)
 {
-	ulong reg;
+	unsigned long i = 0;
 
-	reg = read_p15_c1 ();
-	cp_delay ();
-	reg &= ~C1_DC;
-	write_p15_c1 (reg);
-}
-
-int dcache_status (void)
-{
-	return (read_p15_c1 () & C1_DC) != 0;
+	asm ("mcr p15, 0, %0, c7, c7, 0": :"r" (i));
 }
-#endif
diff --git a/cpu/pxa/cpu.c b/cpu/pxa/cpu.c
index e84cb5b156..3a1be57f44 100644
--- a/cpu/pxa/cpu.c
+++ b/cpu/pxa/cpu.c
@@ -33,11 +33,14 @@
 #include <common.h>
 #include <command.h>
 #include <asm/arch/pxa-regs.h>
+#include <asm/system.h>
 
 #ifdef CONFIG_USE_IRQ
 DECLARE_GLOBAL_DATA_PTR;
 #endif
 
+static void cache_flush(void);
+
 int cpu_init (void)
 {
 	/*
@@ -59,92 +62,26 @@ int cleanup_before_linux (void)
 	 * just disable everything that can disturb booting linux
 	 */
 
-	unsigned long i;
-
 	disable_interrupts ();
 
 	/* turn off I-cache */
-	asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i));
-	i &= ~0x1000;
-	asm ("mcr p15, 0, %0, c1, c0, 0": :"r" (i));
+	icache_disable();
+	dcache_disable();
 
 	/* flush I-cache */
-	asm ("mcr p15, 0, %0, c7, c5, 0": :"r" (i));
+	cache_flush();
 
 	return (0);
 }
 
-int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+/* flush I/D-cache */
+static void cache_flush (void)
 {
-	printf ("resetting ...\n");
-
-	udelay (50000);				/* wait 50 ms */
-	disable_interrupts ();
-	reset_cpu (0);
-
-	/*NOTREACHED*/
-	return (0);
-}
-
-/* taken from blob */
-void icache_enable (void)
-{
-	register u32 i;
-
-	/* read control register */
-	asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i));
-
-	/* set i-cache */
-	i |= 0x1000;
-
-	/* write back to control register */
-	asm ("mcr p15, 0, %0, c1, c0, 0": :"r" (i));
-}
-
-void icache_disable (void)
-{
-	register u32 i;
-
-	/* read control register */
-	asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i));
+	unsigned long i = 0;
 
-	/* clear i-cache */
-	i &= ~0x1000;
-
-	/* write back to control register */
-	asm ("mcr p15, 0, %0, c1, c0, 0": :"r" (i));
-
-	/* flush i-cache */
 	asm ("mcr p15, 0, %0, c7, c5, 0": :"r" (i));
 }
 
-int icache_status (void)
-{
-	register u32 i;
-
-	/* read control register */
-	asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i));
-
-	/* return bit */
-	return (i & 0x1000);
-}
-
-/* we will never enable dcache, because we have to setup MMU first */
-void dcache_enable (void)
-{
-	return;
-}
-
-void dcache_disable (void)
-{
-	return;
-}
-
-int dcache_status (void)
-{
-	return 0;					/* always off */
-}
-
 #ifndef CONFIG_CPU_MONAHANS
 void set_GPIO_mode(int gpio_mode)
 {
diff --git a/cpu/s3c44b0/cpu.c b/cpu/s3c44b0/cpu.c
index e4cdb823b4..7ef4a1fdb0 100644
--- a/cpu/s3c44b0/cpu.c
+++ b/cpu/s3c44b0/cpu.c
@@ -72,12 +72,3 @@ void reset_cpu (ulong addr)
 		/*NOP*/
 	}
 }
-
-int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	disable_interrupts ();
-	reset_cpu (0);
-
-	/*NOTREACHED*/
-	return (0);
-}
diff --git a/cpu/sa1100/cpu.c b/cpu/sa1100/cpu.c
index bb4e5a1de9..ed1a6f7cd3 100644
--- a/cpu/sa1100/cpu.c
+++ b/cpu/sa1100/cpu.c
@@ -32,11 +32,14 @@
 
 #include <common.h>
 #include <command.h>
+#include <asm/system.h>
 
 #ifdef CONFIG_USE_IRQ
 DECLARE_GLOBAL_DATA_PTR;
 #endif
 
+static void cache_flush(void);
+
 int cpu_init (void)
 {
 	/*
@@ -58,88 +61,22 @@ int cleanup_before_linux (void)
 	 * just disable everything that can disturb booting linux
 	 */
 
-	unsigned long i;
-
 	disable_interrupts ();
 
 	/* turn off I-cache */
-	asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i));
-	i &= ~0x1000;
-	asm ("mcr p15, 0, %0, c1, c0, 0": :"r" (i));
+	icache_disable();
+	dcache_disable();
 
 	/* flush I-cache */
-	asm ("mcr p15, 0, %0, c7, c5, 0": :"r" (i));
+	cache_flush();
 
 	return (0);
 }
 
-int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+/* flush I/D-cache */
+static void cache_flush (void)
 {
-	printf ("resetting ...\n");
-
-	udelay (50000);				/* wait 50 ms */
-	disable_interrupts ();
-	reset_cpu (0);
-
-	/*NOTREACHED*/
-	return (0);
-}
-
-/* taken from blob */
-void icache_enable (void)
-{
-	register u32 i;
-
-	/* read control register */
-	asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i));
-
-	/* set i-cache */
-	i |= 0x1000;
-
-	/* write back to control register */
-	asm ("mcr p15, 0, %0, c1, c0, 0": :"r" (i));
-}
-
-void icache_disable (void)
-{
-	register u32 i;
-
-	/* read control register */
-	asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i));
+	unsigned long i = 0;
 
-	/* clear i-cache */
-	i &= ~0x1000;
-
-	/* write back to control register */
-	asm ("mcr p15, 0, %0, c1, c0, 0": :"r" (i));
-
-	/* flush i-cache */
 	asm ("mcr p15, 0, %0, c7, c5, 0": :"r" (i));
 }
-
-int icache_status (void)
-{
-	register u32 i;
-
-	/* read control register */
-	asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i));
-
-	/* return bit */
-	return (i & 0x1000);
-}
-
-/* we will never enable dcache, because we have to setup MMU first */
-void dcache_enable (void)
-{
-	return;
-}
-
-void dcache_disable (void)
-{
-	return;
-}
-
-int dcache_status (void)
-{
-	return 0;					/* always off */
-}
diff --git a/include/asm-arm/system.h b/include/asm-arm/system.h
new file mode 100644
index 0000000000..2b28a261ba
--- /dev/null
+++ b/include/asm-arm/system.h
@@ -0,0 +1,84 @@
+#ifndef __ASM_ARM_SYSTEM_H
+#define __ASM_ARM_SYSTEM_H
+
+#ifdef __KERNEL__
+
+#define CPU_ARCH_UNKNOWN	0
+#define CPU_ARCH_ARMv3		1
+#define CPU_ARCH_ARMv4		2
+#define CPU_ARCH_ARMv4T		3
+#define CPU_ARCH_ARMv5		4
+#define CPU_ARCH_ARMv5T		5
+#define CPU_ARCH_ARMv5TE	6
+#define CPU_ARCH_ARMv5TEJ	7
+#define CPU_ARCH_ARMv6		8
+#define CPU_ARCH_ARMv7		9
+
+/*
+ * CR1 bits (CP#15 CR1)
+ */
+#define CR_M	(1 << 0)	/* MMU enable				*/
+#define CR_A	(1 << 1)	/* Alignment abort enable		*/
+#define CR_C	(1 << 2)	/* Dcache enable			*/
+#define CR_W	(1 << 3)	/* Write buffer enable			*/
+#define CR_P	(1 << 4)	/* 32-bit exception handler		*/
+#define CR_D	(1 << 5)	/* 32-bit data address range		*/
+#define CR_L	(1 << 6)	/* Implementation defined		*/
+#define CR_B	(1 << 7)	/* Big endian				*/
+#define CR_S	(1 << 8)	/* System MMU protection		*/
+#define CR_R	(1 << 9)	/* ROM MMU protection			*/
+#define CR_F	(1 << 10)	/* Implementation defined		*/
+#define CR_Z	(1 << 11)	/* Implementation defined		*/
+#define CR_I	(1 << 12)	/* Icache enable			*/
+#define CR_V	(1 << 13)	/* Vectors relocated to 0xffff0000	*/
+#define CR_RR	(1 << 14)	/* Round Robin cache replacement	*/
+#define CR_L4	(1 << 15)	/* LDR pc can set T bit			*/
+#define CR_DT	(1 << 16)
+#define CR_IT	(1 << 18)
+#define CR_ST	(1 << 19)
+#define CR_FI	(1 << 21)	/* Fast interrupt (lower latency mode)	*/
+#define CR_U	(1 << 22)	/* Unaligned access operation		*/
+#define CR_XP	(1 << 23)	/* Extended page tables			*/
+#define CR_VE	(1 << 24)	/* Vectored interrupts			*/
+#define CR_EE	(1 << 25)	/* Exception (Big) Endian		*/
+#define CR_TRE	(1 << 28)	/* TEX remap enable			*/
+#define CR_AFE	(1 << 29)	/* Access flag enable			*/
+#define CR_TE	(1 << 30)	/* Thumb exception enable		*/
+
+/*
+ * This is used to ensure the compiler did actually allocate the register we
+ * asked it for some inline assembly sequences.  Apparently we can't trust
+ * the compiler from one version to another so a bit of paranoia won't hurt.
+ * This string is meant to be concatenated with the inline asm string and
+ * will cause compilation to stop on mismatch.
+ * (for details, see gcc PR 15089)
+ */
+#define __asmeq(x, y)  ".ifnc " x "," y " ; .err ; .endif\n\t"
+
+#ifndef __ASSEMBLY__
+
+#define isb() __asm__ __volatile__ ("" : : : "memory")
+
+#define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t");
+
+static inline unsigned int get_cr(void)
+{
+	unsigned int val;
+	asm("mrc p15, 0, %0, c1, c0, 0	@ get CR" : "=r" (val) : : "cc");
+	return val;
+}
+
+static inline void set_cr(unsigned int val)
+{
+	asm volatile("mcr p15, 0, %0, c1, c0, 0	@ set CR"
+	  : : "r" (val) : "cc");
+	isb();
+}
+
+#endif /* __ASSEMBLY__ */
+
+#define arch_align_stack(x) (x)
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/include/configs/B2.h b/include/configs/B2.h
index 01b65c515d..35fad5c553 100644
--- a/include/configs/B2.h
+++ b/include/configs/B2.h
@@ -38,6 +38,7 @@
 #define CONFIG_B2			1	/* on an B2 Board      */
 #define CONFIG_ARM_THUMB	1	/* this is an ARM7TDMI */
 #undef  CONFIG_ARM7_REVD		/* disable ARM720 REV.D Workarounds */
+#define CONFIG_SYS_NO_CP15_CACHE
 
 #define CONFIG_S3C44B0_CLOCK_SPEED	75 /* we have a 75Mhz S3C44B0*/
 
diff --git a/include/configs/assabet.h b/include/configs/assabet.h
index a6c442b51a..8c5b84cf69 100644
--- a/include/configs/assabet.h
+++ b/include/configs/assabet.h
@@ -37,6 +37,8 @@
 #define CONFIG_ASSABET		1	/* on an Intel Assabet Board    */
 
 #undef CONFIG_USE_IRQ
+/* we will never enable dcache, because we have to setup MMU first */
+#define CONFIG_SYS_NO_DCACHE
 
 #define CONFIG_CMDLINE_TAG	 1	/* enable passing of ATAGs      */
 #define CONFIG_SETUP_MEMORY_TAGS 1
diff --git a/include/configs/cerf250.h b/include/configs/cerf250.h
index 751e03c13f..82d1401469 100644
--- a/include/configs/cerf250.h
+++ b/include/configs/cerf250.h
@@ -41,6 +41,9 @@
 
 #undef	CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff */
 
+/* we will never enable dcache, because we have to setup MMU first */
+#define CONFIG_SYS_NO_DCACHE
+
 /*
  * Size of malloc() pool
  */
diff --git a/include/configs/cradle.h b/include/configs/cradle.h
index 850d93b03e..75c5f9bb3e 100644
--- a/include/configs/cradle.h
+++ b/include/configs/cradle.h
@@ -37,6 +37,9 @@
 
 #undef CONFIG_USE_IRQ                   /* we don't need IRQ/FIQ stuff */
 
+/* we will never enable dcache, because we have to setup MMU first */
+#define CONFIG_SYS_NO_DCACHE
+
 /*
  * Size of malloc() pool
  */
diff --git a/include/configs/csb226.h b/include/configs/csb226.h
index d9f85f01ee..ed1845009e 100644
--- a/include/configs/csb226.h
+++ b/include/configs/csb226.h
@@ -42,6 +42,10 @@
 
 #undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff      */
 					/* for timer/console/ethernet       */
+
+/* we will never enable dcache, because we have to setup MMU first */
+#define CONFIG_SYS_NO_DCACHE
+
 /*
  * Hardware drivers
  */
diff --git a/include/configs/delta.h b/include/configs/delta.h
index f5508b7740..bacbd90b5d 100644
--- a/include/configs/delta.h
+++ b/include/configs/delta.h
@@ -39,6 +39,9 @@
 #undef CONFIG_SKIP_RELOCATE_UBOOT
 #undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff */
 
+/* we will never enable dcache, because we have to setup MMU first */
+#define CONFIG_SYS_NO_DCACHE
+
 /*
  * Size of malloc() pool
  */
diff --git a/include/configs/dnp1110.h b/include/configs/dnp1110.h
index 8f615bdb84..b6cfc6721d 100644
--- a/include/configs/dnp1110.h
+++ b/include/configs/dnp1110.h
@@ -42,6 +42,8 @@
 #define CONFIG_DNP1110		1	/* on an DNP/1110 Board      */
 
 #undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff */
+/* we will never enable dcache, because we have to setup MMU first */
+#define CONFIG_SYS_NO_DCACHE
 
 /*
  * Size of malloc() pool
diff --git a/include/configs/evb4510.h b/include/configs/evb4510.h
index ffc9408bc8..0f415d9c8b 100644
--- a/include/configs/evb4510.h
+++ b/include/configs/evb4510.h
@@ -43,6 +43,7 @@
 #define CONFIG_ARM_THUMB	1	/* this is an ARM7TDMI	 */
 #define CONFIG_S3C4510B		1	/* it's a S3C4510B chip	 */
 #define CONFIG_EVB4510		1	/* on an EVB4510 Board	 */
+#define CONFIG_SYS_NO_CP15_CACHE
 
 #define CONFIG_USE_IRQ
 #define CONFIG_STACKSIZE_IRQ    (4*1024)
diff --git a/include/configs/gcplus.h b/include/configs/gcplus.h
index 77d45783c3..b2fbca2f3c 100644
--- a/include/configs/gcplus.h
+++ b/include/configs/gcplus.h
@@ -49,6 +49,8 @@
 #define CONFIG_GCPLUS		1	/* on an ADS GCPlus Board      */
 
 #undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff */
+/* we will never enable dcache, because we have to setup MMU first */
+#define CONFIG_SYS_NO_DCACHE
 
 #define CONFIG_CMDLINE_TAG	 1	/* enable passing of ATAGs	*/
 #define CONFIG_SETUP_MEMORY_TAGS 1
diff --git a/include/configs/innokom.h b/include/configs/innokom.h
index 895998adf4..69654c7c0f 100644
--- a/include/configs/innokom.h
+++ b/include/configs/innokom.h
@@ -39,6 +39,10 @@
 
 #undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff      */
 					/* for timer/console/ethernet       */
+
+/* we will never enable dcache, because we have to setup MMU first */
+#define CONFIG_SYS_NO_DCACHE
+
 /*
  * Hardware drivers
  */
diff --git a/include/configs/integratorap.h b/include/configs/integratorap.h
index 9231e64039..38c024953e 100644
--- a/include/configs/integratorap.h
+++ b/include/configs/integratorap.h
@@ -142,7 +142,7 @@
  * PCI definitions
  */
 
-/*#define CONFIG_PCI			/--* include pci support	*/
+#ifdef CONFIG_PCI			/* pci support	*/
 #undef CONFIG_PCI_PNP
 #define CONFIG_PCI_SCAN_SHOW	1	/* show pci devices on startup	*/
 #define DEBUG
@@ -150,7 +150,6 @@
 #define CONFIG_EEPRO100
 #define CONFIG_SYS_RX_ETH_BUFFER	8	/* use 8 rx buffer on eepro100	*/
 
-
 #define INTEGRATOR_BOOT_ROM_BASE	0x20000000
 #define INTEGRATOR_HDR0_SDRAM_BASE	0x80000000
 
@@ -278,6 +277,7 @@
 #define INTEGRATOR_SC_PCIENABLE \
 			(INTEGRATOR_SC_BASE + INTEGRATOR_SC_PCIENABLE_OFFSET)
 
+#endif /* CONFIG_PCI */
 /*-----------------------------------------------------------------------
  * There are various dependencies on the core module (CM) fitted
  * Users should refer to their CM user guide
diff --git a/include/configs/lart.h b/include/configs/lart.h
index e34ec222b8..5d6d460424 100644
--- a/include/configs/lart.h
+++ b/include/configs/lart.h
@@ -35,6 +35,8 @@
 #define CONFIG_LART		1	/* on an LART Board      */
 
 #undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff */
+/* we will never enable dcache, because we have to setup MMU first */
+#define CONFIG_SYS_NO_DCACHE
 
 /*
  * Size of malloc() pool
diff --git a/include/configs/logodl.h b/include/configs/logodl.h
index 9afa800139..889a9a344d 100644
--- a/include/configs/logodl.h
+++ b/include/configs/logodl.h
@@ -39,6 +39,10 @@
 
 #undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff      */
 					/* for timer/console/ethernet       */
+
+/* we will never enable dcache, because we have to setup MMU first */
+#define CONFIG_SYS_NO_DCACHE
+
 /*
  * Hardware drivers
  */
diff --git a/include/configs/lubbock.h b/include/configs/lubbock.h
index a4b430bbc5..2cf9c02815 100644
--- a/include/configs/lubbock.h
+++ b/include/configs/lubbock.h
@@ -46,6 +46,9 @@
 
 #undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff */
 
+/* we will never enable dcache, because we have to setup MMU first */
+#define CONFIG_SYS_NO_DCACHE
+
 /*
  * Size of malloc() pool
  */
diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h
index c60778c0f0..8e984b4161 100644
--- a/include/configs/omap3_zoom1.h
+++ b/include/configs/omap3_zoom1.h
@@ -303,21 +303,4 @@ extern unsigned int boot_flash_sec;
 extern unsigned int boot_flash_type;
 #endif
 
-
-#define WRITE_NAND_COMMAND(d, adr)\
-			writel(d, &nand_cs_base->nand_cmd)
-#define WRITE_NAND_ADDRESS(d, adr)\
-			writel(d, &nand_cs_base->nand_adr)
-#define WRITE_NAND(d, adr) writew(d, &nand_cs_base->nand_dat)
-#define READ_NAND(adr) readl(&nand_cs_base->nand_dat)
-
-/* Other NAND Access APIs */
-#define NAND_WP_OFF() do {readl(&gpmc_cfg_base->config) |= GPMC_CONFIG_WP; } \
-			while (0)
-#define NAND_WP_ON() do {readl(&gpmc_cfg_base->config) &= ~GPMC_CONFIG_WP; } \
-			while (0)
-#define NAND_DISABLE_CE(nand)
-#define NAND_ENABLE_CE(nand)
-#define NAND_WAIT_READY(nand)	udelay(10)
-
 #endif				/* __CONFIG_H */
diff --git a/include/configs/pleb2.h b/include/configs/pleb2.h
index ab9ea4fdee..ed873faca7 100644
--- a/include/configs/pleb2.h
+++ b/include/configs/pleb2.h
@@ -42,6 +42,9 @@
 
 #undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff */
 
+/* we will never enable dcache, because we have to setup MMU first */
+#define CONFIG_SYS_NO_DCACHE
+
 /*
  * Size of malloc() pool
  */
diff --git a/include/configs/pxa255_idp.h b/include/configs/pxa255_idp.h
index 5e2e7cfcc8..7485f7241c 100644
--- a/include/configs/pxa255_idp.h
+++ b/include/configs/pxa255_idp.h
@@ -68,6 +68,9 @@
 
 #undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff */
 
+/* we will never enable dcache, because we have to setup MMU first */
+#define CONFIG_SYS_NO_DCACHE
+
 /*
  * Size of malloc() pool
  */
diff --git a/include/configs/shannon.h b/include/configs/shannon.h
index c8b0b161d8..13cc5ff3b7 100644
--- a/include/configs/shannon.h
+++ b/include/configs/shannon.h
@@ -44,6 +44,8 @@
 #define CONFIG_SHANNON		1	/* on an SHANNON/TuxScreen Board      */
 
 #undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff */
+/* we will never enable dcache, because we have to setup MMU first */
+#define CONFIG_SYS_NO_DCACHE
 
 /*
  * Size of malloc() pool
diff --git a/include/configs/trizepsiv.h b/include/configs/trizepsiv.h
index c2744b5eba..49173181fb 100644
--- a/include/configs/trizepsiv.h
+++ b/include/configs/trizepsiv.h
@@ -47,6 +47,9 @@
 
 #undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff */
 
+/* we will never enable dcache, because we have to setup MMU first */
+#define CONFIG_SYS_NO_DCACHE
+
 #define RTC
 
 /*
diff --git a/include/configs/wepep250.h b/include/configs/wepep250.h
index e74303da85..197ac0bbd6 100644
--- a/include/configs/wepep250.h
+++ b/include/configs/wepep250.h
@@ -27,6 +27,8 @@
 #define CONFIG_WEPEP250        1        /* config for wepep250 board */
 #undef  CONFIG_USE_IRQ                  /* don't need use IRQ/FIQ    */
 
+/* we will never enable dcache, because we have to setup MMU first */
+#define CONFIG_SYS_NO_DCACHE
 
 /*
  * Select serial console configuration
diff --git a/include/configs/xaeniax.h b/include/configs/xaeniax.h
index 086ca69c10..1632d29622 100644
--- a/include/configs/xaeniax.h
+++ b/include/configs/xaeniax.h
@@ -49,6 +49,9 @@
 
 #undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff */
 
+/* we will never enable dcache, because we have to setup MMU first */
+#define CONFIG_SYS_NO_DCACHE
+
 /*
  * select serial console configuration
  */
diff --git a/include/configs/xm250.h b/include/configs/xm250.h
index 922eb2c6b0..c8bdf3186b 100644
--- a/include/configs/xm250.h
+++ b/include/configs/xm250.h
@@ -36,6 +36,9 @@
 #define CONFIG_XM250	       1	/* on a MicroSys XM250 Board	*/
 #undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff	*/
 
+/* we will never enable dcache, because we have to setup MMU first */
+#define CONFIG_SYS_NO_DCACHE
+
 /*
  * Size of malloc() pool; this lives below the uppermost 128 KiB which are
  * used for the RAM copy of the uboot code
diff --git a/include/configs/xsengine.h b/include/configs/xsengine.h
index cad414c1d9..7e2abbf346 100644
--- a/include/configs/xsengine.h
+++ b/include/configs/xsengine.h
@@ -35,6 +35,9 @@
 #define CONFIG_DOS_PARTITION		1
 #define BOARD_LATE_INIT			1
 #undef  CONFIG_USE_IRQ					/* we don't need IRQ/FIQ stuff */
+/* we will never enable dcache, because we have to setup MMU first */
+#define CONFIG_SYS_NO_DCACHE
+
 #define CONFIG_SYS_HZ			1000
 #define CONFIG_SYS_CPUSPEED			0x161           /* set core clock to 400/200/100 MHz */
 
diff --git a/include/configs/zylonite.h b/include/configs/zylonite.h
index 064740d3cc..217636a618 100644
--- a/include/configs/zylonite.h
+++ b/include/configs/zylonite.h
@@ -47,6 +47,9 @@
 #undef CONFIG_SKIP_RELOCATE_UBOOT
 #undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff */
 
+/* we will never enable dcache, because we have to setup MMU first */
+#define CONFIG_SYS_NO_DCACHE
+
 /*
  * Size of malloc() pool
  */
diff --git a/include/s3c6400.h b/include/s3c6400.h
index fd3e99bcfa..87f3760b6c 100644
--- a/include/s3c6400.h
+++ b/include/s3c6400.h
@@ -215,9 +215,9 @@
 #define GPACONSLP_OFFSET	0x0C
 #define GPAPUDSLP_OFFSET	0x10
 #define GPBCON_OFFSET		0x20
-#define GPBDAT_OFFSET		0x04
-#define GPBPUD_OFFSET		0x08
-#define GPBCONSLP_OFFSET	0x0C
+#define GPBDAT_OFFSET		0x24
+#define GPBPUD_OFFSET		0x28
+#define GPBCONSLP_OFFSET	0x2C
 #define GPBPUDSLP_OFFSET	0x30
 #define GPCCON_OFFSET		0x40
 #define GPCDAT_OFFSET		0x44
@@ -380,6 +380,11 @@
  */
 #define ELFIN_MEM_SYS_CFG	0x7e00f120
 
+#define S3C64XX_MEM_SYS_CFG_16BIT	(1 << 12)
+
+#define S3C64XX_MEM_SYS_CFG_NAND	0x0008
+#define S3C64XX_MEM_SYS_CFG_ONENAND	S3C64XX_MEM_SYS_CFG_16BIT
+
 #define GPACON		(ELFIN_GPIO_BASE + GPACON_OFFSET)
 #define GPADAT		(ELFIN_GPIO_BASE + GPADAT_OFFSET)
 #define GPAPUD		(ELFIN_GPIO_BASE + GPAPUD_OFFSET)
diff --git a/lib_arm/Makefile b/lib_arm/Makefile
index c8795b2314..4469361a8a 100644
--- a/lib_arm/Makefile
+++ b/lib_arm/Makefile
@@ -35,8 +35,12 @@ SOBJS-y	+= _umodsi3.o
 COBJS-y	+= board.o
 COBJS-y	+= bootm.o
 COBJS-y	+= cache.o
+ifndef CONFIG_SYS_NO_CP15_CACHE
+COBJS-y	+= cache-cp15.o
+endif
 COBJS-y	+= div0.o
 COBJS-y	+= interrupts.o
+COBJS-y	+= reset.o
 
 SRCS	:= $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
 OBJS	:= $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
diff --git a/lib_arm/cache-cp15.c b/lib_arm/cache-cp15.c
new file mode 100644
index 0000000000..62ed54fb4d
--- /dev/null
+++ b/lib_arm/cache-cp15.c
@@ -0,0 +1,120 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/system.h>
+
+#if !(defined(CONFIG_SYS_NO_ICACHE) && defined(CONFIG_SYS_NO_DCACHE))
+static void cp_delay (void)
+{
+	volatile int i;
+
+	/* copro seems to need some delay between reading and writing */
+	for (i = 0; i < 100; i++)
+		nop();
+}
+
+/* cache_bit must be either CR_I or CR_C */
+static void cache_enable(uint32_t cache_bit)
+{
+	uint32_t reg;
+
+	reg = get_cr();	/* get control reg. */
+	cp_delay();
+	set_cr(reg | cache_bit);
+}
+
+/* cache_bit must be either CR_I or CR_C */
+static void cache_disable(uint32_t cache_bit)
+{
+	uint32_t reg;
+
+	reg = get_cr();
+	cp_delay();
+	set_cr(reg & ~cache_bit);
+}
+#endif
+
+#ifdef CONFIG_SYS_NO_ICACHE
+void icache_enable (void)
+{
+	return;
+}
+
+void icache_disable (void)
+{
+	return;
+}
+
+int icache_status (void)
+{
+	return 0;					/* always off */
+}
+#else
+void icache_enable(void)
+{
+	cache_enable(CR_I);
+}
+
+void icache_disable(void)
+{
+	cache_disable(CR_I);
+}
+
+int icache_status(void)
+{
+	return (get_cr() & CR_I) != 0;
+}
+#endif
+
+#ifdef CONFIG_SYS_NO_DCACHE
+void dcache_enable (void)
+{
+	return;
+}
+
+void dcache_disable (void)
+{
+	return;
+}
+
+int dcache_status (void)
+{
+	return 0;					/* always off */
+}
+#else
+void dcache_enable(void)
+{
+	cache_enable(CR_C);
+}
+
+void dcache_disable(void)
+{
+	cache_disable(CR_C);
+}
+
+int dcache_status(void)
+{
+	return (get_cr() & CR_C) != 0;
+}
+#endif
diff --git a/lib_arm/reset.c b/lib_arm/reset.c
new file mode 100644
index 0000000000..550d1e59c7
--- /dev/null
+++ b/lib_arm/reset.c
@@ -0,0 +1,53 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * (C) Copyright 2004
+ * DAVE Srl
+ * http://www.dave-tech.it
+ * http://www.wawnet.biz
+ * mailto:info@wawnet.biz
+ *
+ * (C) Copyright 2004 Texas Insturments
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	puts ("resetting ...\n");
+
+	udelay (50000);				/* wait 50 ms */
+
+	disable_interrupts();
+	reset_cpu(0);
+
+	/*NOTREACHED*/
+	return 0;
+}