arm: Remove eb_cpu9k2 and eb_cpu9k2_ram boards

These board have not been converted to generic board by the deadline.
Remove them.

Signed-off-by: Simon Glass <sjg@chromium.org>

8 files changed, 0 insertions, 815 deletions

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 01a8d459d8..de06416da5 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -8,10 +8,6 @@ config TARGET_AT91RM9200EK
 	bool "Atmel AT91RM9200 evaluation kit"
 	select CPU_ARM920T
 
-config TARGET_EB_CPUX9K2
-	bool "Support eb_cpux9k2"
-	select CPU_ARM920T
-
 config TARGET_AT91SAM9260EK
 	bool "Atmel at91sam9260 reference board"
 	select CPU_ARM926EJS
@@ -143,7 +139,6 @@ source "board/atmel/sama5d3_xplained/Kconfig"
 source "board/atmel/sama5d3xek/Kconfig"
 source "board/atmel/sama5d4_xplained/Kconfig"
 source "board/atmel/sama5d4ek/Kconfig"
-source "board/BuS/eb_cpux9k2/Kconfig"
 source "board/bluewater/snapper9260/Kconfig"
 source "board/BuS/vl_ma2sc/Kconfig"
 source "board/calao/usb_a9263/Kconfig"
diff --git a/board/BuS/eb_cpux9k2/Kconfig b/board/BuS/eb_cpux9k2/Kconfig
deleted file mode 100644
index e2a787a1a8..0000000000
--- a/board/BuS/eb_cpux9k2/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_EB_CPUX9K2
-
-config SYS_BOARD
-	default "eb_cpux9k2"
-
-config SYS_VENDOR
-	default "BuS"
-
-config SYS_CONFIG_NAME
-	default "eb_cpux9k2"
-
-endif
diff --git a/board/BuS/eb_cpux9k2/MAINTAINERS b/board/BuS/eb_cpux9k2/MAINTAINERS
deleted file mode 100644
index 81c4349ac9..0000000000
--- a/board/BuS/eb_cpux9k2/MAINTAINERS
+++ /dev/null
@@ -1,7 +0,0 @@
-EB_CPUX9K2 BOARD
-M:	Jens Scharsig <esw@bus-elektronik.de>
-S:	Maintained
-F:	board/BuS/eb_cpux9k2/
-F:	include/configs/eb_cpux9k2.h
-F:	configs/eb_cpux9k2_defconfig
-F:	configs/eb_cpux9k2_ram_defconfig
diff --git a/board/BuS/eb_cpux9k2/Makefile b/board/BuS/eb_cpux9k2/Makefile
deleted file mode 100644
index b2ec389ab9..0000000000
--- a/board/BuS/eb_cpux9k2/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= cpux9k2.o
diff --git a/board/BuS/eb_cpux9k2/cpux9k2.c b/board/BuS/eb_cpux9k2/cpux9k2.c
deleted file mode 100644
index 3880a06897..0000000000
--- a/board/BuS/eb_cpux9k2/cpux9k2.c
+++ /dev/null
@@ -1,373 +0,0 @@
-/*
- * (C) Copyright 2008-2009
- * BuS Elektronik GmbH & Co. KG <www.bus-elektronik.de>
- * Jens Scharsig <esw@bus-elektronik.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <exports.h>
-#include <net.h>
-#include <netdev.h>
-#include <nand.h>
-
-#include <asm/io.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/at91_pio.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_mc.h>
-#include <asm/arch/at91_common.h>
-
-#ifdef CONFIG_STATUS_LED
-#include <status_led.h>
-#endif
-
-#ifdef CONFIG_VIDEO
-#include <bus_vcxk.h>
-
-extern unsigned long display_width;
-extern unsigned long display_height;
-#endif
-
-#ifdef CONFIG_CMD_NAND
-void cpux9k2_nand_hw_init(void);
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-int board_init(void)
-{
-	at91_pio_t *pio	= (at91_pio_t *) ATMEL_BASE_PIO;
-
-	/* Correct IRDA resistor problem / Set PA23_TXD in Output */
-	writel(ATMEL_PMX_AA_TXD2, &pio->pioa.oer);
-
-	gd->bd->bi_arch_number = MACH_TYPE_EB_CPUX9K2;
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
-
-#ifdef CONFIG_STATUS_LED
-	status_led_set(STATUS_LED_BOOT, STATUS_LED_ON);
-#endif
-#ifdef CONFIG_CMD_NAND
-	cpux9k2_nand_hw_init();
-#endif
-	return 0;
-}
-
-int board_early_init_f(void)
-{
-	at91_seriald_hw_init();
-	return 0;
-}
-
-#ifdef CONFIG_MISC_INIT_R
-
-int misc_init_r(void)
-{
-	uchar	mac[8];
-	uchar	tm;
-	uchar	midx;
-	uchar	macn6, macn7;
-
-	if (getenv("ethaddr") == NULL) {
-		if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0x00,
-				CONFIG_SYS_I2C_EEPROM_ADDR_LEN,
-				(uchar *) &mac, sizeof(mac)) != 0) {
-			puts("Error reading MAC from EEPROM\n");
-		} else {
-			tm = 0;
-			macn6 = 0;
-			macn7 = 0xFF;
-			for (midx = 0; midx < 6; midx++) {
-				if ((mac[midx] != 0) && (mac[midx] != 0xFF))
-					tm++;
-				macn6 += mac[midx];
-				macn7 ^= mac[midx];
-			}
-			if ((macn6 != mac[6]) || (macn7 != mac[7]))
-				tm = 0;
-			if (tm)
-				eth_setenv_enetaddr("ethaddr", mac);
-			 else
-				puts("Error: invalid MAC at EEPROM\n");
-		}
-	}
-	gd->jt->do_reset = do_reset;
-
-#ifdef CONFIG_STATUS_LED
-	status_led_set(STATUS_LED_BOOT, STATUS_LED_BLINKING);
-#endif
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_RESET_PHY_R
-void reset_phy(void)
-{
-	udelay(10000);
-	eth_init();
-}
-#endif
-
-/*
- * DRAM initialisations
- */
-
-int dram_init(void)
-{
-	gd->ram_size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE,
-			CONFIG_SYS_SDRAM_SIZE);
-	return 0;
-}
-
-/*
- * Ethernet initialisations
- */
-
-#ifdef CONFIG_DRIVER_AT91EMAC
-int board_eth_init(bd_t *bis)
-{
-	int rc = 0;
-	rc = at91emac_register(bis, (u32) ATMEL_BASE_EMAC);
-	return rc;
-}
-#endif
-
-/*
- * Disk On Chip (NAND) Millenium initialization.
- * The NAND lives in the CS2* space
- */
-#if defined(CONFIG_CMD_NAND)
-
-#define	MASK_ALE	(1 << 22)	/* our ALE is AD22 */
-#define	MASK_CLE	(1 << 21)	/* our CLE is AD21 */
-
-void cpux9k2_nand_hw_init(void)
-{
-	unsigned long csr;
-	at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
-	at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
-	at91_mc_t *mc = (at91_mc_t *) ATMEL_BASE_MC;
-
-	/* Setup Smart Media, fitst enable the address range of CS3 */
-	writel(readl(&mc->ebi.csa) | AT91_EBI_CSA_CS3A, &mc->ebi.csa);
-
-	/* RWH = 1 | RWS = 0 | TDF = 1 | NWS = 3 */
-	csr =	AT91_SMC_CSR_RWHOLD(1) | AT91_SMC_CSR_TDF(1) |
-		AT91_SMC_CSR_NWS(3) |
-		AT91_SMC_CSR_ACSS_STANDARD | AT91_SMC_CSR_DBW_8 |
-		AT91_SMC_CSR_WSEN;
-	writel(csr, &mc->smc.csr[3]);
-
-	writel(ATMEL_PMX_CA_SMOE | ATMEL_PMX_CA_SMWE, &pio->pioc.asr);
-	writel(ATMEL_PMX_CA_BFCK | ATMEL_PMX_CA_SMOE | ATMEL_PMX_CA_SMWE,
-		&pio->pioc.pdr);
-
-	/* Configure PC2 as input (signal Nand READY ) */
-	writel(ATMEL_PMX_CA_BFAVD, &pio->pioc.per);
-	writel(ATMEL_PMX_CA_BFAVD, &pio->pioc.odr); /* disable output */
-	writel(ATMEL_PMX_CA_BFCK, &pio->pioc.codr);
-
-	/* PIOC clock enabling */
-	writel(1 << ATMEL_ID_PIOC, &pmc->pcer);
-}
-
-static void board_nand_hwcontrol(struct mtd_info *mtd,
-	int cmd, unsigned int ctrl)
-{
-	at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
-	struct nand_chip *this = mtd->priv;
-	ulong IO_ADDR_W = (ulong) this->IO_ADDR_W;
-
-	if (ctrl & NAND_CTRL_CHANGE) {
-		IO_ADDR_W &= ~(MASK_ALE | MASK_CLE);
-
-		if (ctrl & NAND_CLE)
-			IO_ADDR_W |= MASK_CLE;
-		if (ctrl & NAND_ALE)
-			IO_ADDR_W |= MASK_ALE;
-
-		if ((ctrl & NAND_NCE))
-			writel(1, &pio->pioc.codr);
-		else
-			writel(1, &pio->pioc.sodr);
-
-		this->IO_ADDR_W = (void *) IO_ADDR_W;
-	}
-	if (cmd != NAND_CMD_NONE)
-		writeb(cmd, this->IO_ADDR_W);
-}
-
-static int board_nand_dev_ready(struct mtd_info *mtd)
-{
-	at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
-	return ((readl(&pio->pioc.pdsr) & (1 << 2)) != 0);
-}
-
-int board_nand_init(struct nand_chip *nand)
-{
-	cpux9k2_nand_hw_init();
-	nand->ecc.mode = NAND_ECC_SOFT;
-	nand->cmd_ctrl = board_nand_hwcontrol;
-	nand->dev_ready = board_nand_dev_ready;
-	nand->chip_delay = 20;
-	return 0;
-}
-
-#endif
-
-#if defined(CONFIG_VIDEO)
-/*
- * drv_video_init
- * FUNCTION: initialize VCxK device
- */
-
-int drv_video_init(void)
-{
-#ifdef CONFIG_SPLASH_SCREEN
-	unsigned long splash;
-#endif
-	char *s;
-	unsigned long csr;
-	at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
-	at91_mc_t *mc = (at91_mc_t *) ATMEL_BASE_MC;
-
-	printf("Init Video as ");
-	s = getenv("displaywidth");
-	if (s != NULL)
-		display_width = simple_strtoul(s, NULL, 10);
-	else
-		display_width = 256;
-	s = getenv("displayheight");
-	if (s != NULL)
-		display_height = simple_strtoul(s, NULL, 10);
-	else
-		display_height = 256;
-	printf("%ld x %ld pixel matrix\n", display_width, display_height);
-
-	/* RWH = 2 | RWS =2  | TDF = 4 | NWS = 0x6 */
-	csr =	AT91_SMC_CSR_RWHOLD(2) | AT91_SMC_CSR_RWSETUP(2) |
-		AT91_SMC_CSR_TDF(4) | AT91_SMC_CSR_NWS(6) |
-		AT91_SMC_CSR_ACSS_STANDARD | AT91_SMC_CSR_DBW_16 |
-		AT91_SMC_CSR_BAT_16 | AT91_SMC_CSR_WSEN;
-	writel(csr, &mc->smc.csr[2]);
-	writel(1 << ATMEL_ID_PIOB, &pmc->pcer);
-
-	vcxk_init(display_width, display_height);
-#ifdef CONFIG_SPLASH_SCREEN
-	s = getenv("splashimage");
-	if (s != NULL) {
-		splash = simple_strtoul(s, NULL, 16);
-		printf("use splashimage: %lx\n", splash);
-		video_display_bitmap(splash, 0, 0);
-	}
-#endif
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_SYS_I2C_SOFT
-
-void i2c_init_board(void)
-{
-	u32 pin;
-	at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
-	at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
-
-	writel(1 << ATMEL_ID_PIOA, &pmc->pcer);
-	pin = ATMEL_PMX_AA_TWD | ATMEL_PMX_AA_TWCK;
-	writel(pin, &pio->pioa.idr);
-	writel(pin, &pio->pioa.pudr);
-	writel(pin, &pio->pioa.per);
-	writel(pin, &pio->pioa.oer);
-	writel(pin, &pio->pioa.sodr);
-}
-
-#endif
-
-/*--------------------------------------------------------------------------*/
-
-#ifdef CONFIG_STATUS_LED
-
-void __led_toggle(led_id_t mask)
-{
-	at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
-
-	if (readl(&pio->piod.odsr) & mask)
-		writel(mask, &pio->piod.codr);
-	else
-		writel(mask, &pio->piod.codr);
-}
-
-void __led_init(led_id_t mask, int state)
-{
-	at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
-	at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
-
-	writel(1 << ATMEL_ID_PIOD, &pmc->pcer);	/* Enable PIOB clock */
-	/* Disable peripherals on LEDs */
-	writel(STATUS_LED_BIT | STATUS_LED_BIT1, &pio->piod.per);
-	/* Enable pins as outputs */
-	writel(STATUS_LED_BIT | STATUS_LED_BIT1, &pio->piod.oer);
-	/* Turn all LEDs OFF */
-	writel(STATUS_LED_BIT | STATUS_LED_BIT1, &pio->piod.sodr);
-
-	__led_set(mask, state);
-}
-
-void __led_set(led_id_t mask, int state)
-{
-	at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
-	if (state == STATUS_LED_ON)
-		writel(mask, &pio->piod.codr);
-	else
-		writel(mask, &pio->piod.sodr);
-}
-
-#endif
-
-/*---------------------------------------------------------------------------*/
-
-int do_brightness(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	int rcode = 0;
-	ulong side;
-	ulong bright;
-
-	switch (argc) {
-	case 3:
-		side = simple_strtoul(argv[1], NULL, 10);
-		bright = simple_strtoul(argv[2], NULL, 10);
-		if ((side >= 0) && (side <= 3) &&
-				(bright >= 0) && (bright <= 1000)) {
-			vcxk_setbrightness(side, bright);
-			rcode = 0;
-		} else {
-			printf("parameters out of range\n");
-			printf("Usage:\n%s\n", cmdtp->usage);
-			rcode = 1;
-		}
-		break;
-	default:
-		printf("Usage:\n%s\n", cmdtp->usage);
-		rcode = 1;
-		break;
-	}
-	return rcode;
-}
-
-/*---------------------------------------------------------------------------*/
-
-U_BOOT_CMD(
-	bright,	3,	0,	do_brightness,
-	"bright  - sets the display brightness\n",
-	" <side> <0..1000>\n        side: 0/3=both; 1=first; 2=second\n"
-);
-
-/* EOF cpu9k2.c */
diff --git a/configs/eb_cpux9k2_defconfig b/configs/eb_cpux9k2_defconfig
deleted file mode 100644
index 6a6f3cd2c2..0000000000
--- a/configs/eb_cpux9k2_defconfig
+++ /dev/null
@@ -1,5 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_AT91=y
-CONFIG_TARGET_EB_CPUX9K2=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_SYS_PROMPT="U-Boot> "
diff --git a/configs/eb_cpux9k2_ram_defconfig b/configs/eb_cpux9k2_ram_defconfig
deleted file mode 100644
index 47c2178f16..0000000000
--- a/configs/eb_cpux9k2_ram_defconfig
+++ /dev/null
@@ -1,5 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_AT91=y
-CONFIG_TARGET_EB_CPUX9K2=y
-CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT"
-# CONFIG_CMD_SETEXPR is not set
diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h
deleted file mode 100644
index d27f7e0452..0000000000
--- a/include/configs/eb_cpux9k2.h
+++ /dev/null
@@ -1,400 +0,0 @@
-/*
- * (C) Copyright 2008-2009
- * BuS Elektronik GmbH & Co. KG <www.bus-elektronik.de>
- * Jens Scharsig <esw@bus-elektronik.de>
- *
- * Configuation settings for the EB+CPUx9K2 board.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef _CONFIG_EB_CPUx9K2_H_
-#define _CONFIG_EB_CPUx9K2_H_
-
-/*--------------------------------------------------------------------------*/
-
-#define CONFIG_AT91RM9200		/* It's an Atmel AT91RM9200 SoC	*/
-#define CONFIG_EB_CPUX9K2		/* on an EP+CPUX9K2 Board	*/
-#define USE_920T_MMU
-
-#define CONFIG_VERSION_VARIABLE
-#define CONFIG_IDENT_STRING	" on EB+CPUx9K2"
-
-#include <asm/hardware.h>	/* needed for port definitions */
-
-#define CONFIG_MISC_INIT_R
-#define CONFIG_BOARD_EARLY_INIT_F
-
-#define MACH_TYPE_EB_CPUX9K2		1977
-#define CONFIG_MACH_TYPE		MACH_TYPE_EB_CPUX9K2
-
-#define CONFIG_SYS_CACHELINE_SIZE	32
-#define CONFIG_SYS_DCACHE_OFF
-
-/*--------------------------------------------------------------------------*/
-#ifndef CONFIG_RAMBOOT
-#define CONFIG_SYS_TEXT_BASE		0x00000000
-#else
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SYS_TEXT_BASE		0x21800000
-#endif
-#define CONFIG_SYS_LOAD_ADDR		0x21000000  /* default load address */
-#define CONFIG_STANDALONE_LOAD_ADDR	0x21000000
-
-#define CONFIG_BOOT_RETRY_TIME		30
-#define CONFIG_CMDLINE_EDITING
-
-#define CONFIG_SYS_CBSIZE	512		/* Console I/O Buffer Size */
-#define CONFIG_SYS_MAXARGS	32		/* max number of command args */
-#define CONFIG_SYS_PBSIZE	\
-	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-
-/*
- * ARM asynchronous clock
- */
-
-#define AT91C_MAIN_CLOCK	179404800	/* from 12.288 MHz * 73 / 5 */
-#define AT91C_MASTER_CLOCK	(AT91C_MAIN_CLOCK / 3)
-#define CONFIG_SYS_HZ_CLOCK 	(AT91C_MASTER_CLOCK / 2)
-
-#define CONFIG_SYS_AT91_SLOW_CLOCK	32768		/* slow clock */
-
-#define CONFIG_CMDLINE_TAG		1
-#define CONFIG_SETUP_MEMORY_TAGS	1
-#define CONFIG_INITRD_TAG		1
-
-#define CONFIG_SYS_USE_MAIN_OSCILLATOR	1
-/* flash */
-#define CONFIG_SYS_EBI_CFGR_VAL		0x00000000
-#define CONFIG_SYS_SMC_CSR0_VAL		0x00003284 /* 16bit, 2 TDF, 4 WS */
-
-/* clocks */
-#define CONFIG_SYS_PLLAR_VAL		0x20483E05 /* 179.4048 MHz for PCK */
-#define CONFIG_SYS_PLLBR_VAL		0x104C3E0A /* 47.3088 MHz (for USB) */
-#define CONFIG_SYS_MCKR_VAL		0x00000202 /* PCK/3 = MCK Clock */
-
-/*
- * Size of malloc() pool
- */
-
-#define CONFIG_SYS_MALLOC_LEN		(4 * 1024 * 1024)
-
-/*
- * sdram
- */
-
-#define CONFIG_NR_DRAM_BANKS		1
-
-#define CONFIG_SYS_SDRAM_BASE		0x20000000
-#define CONFIG_SYS_SDRAM_SIZE		0x04000000  /* 64 megs */
-#define CONFIG_SYS_INIT_SP_ADDR		0x00204000  /* use internal SRAM */
-
-#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + \
-					CONFIG_SYS_SDRAM_SIZE - 0x00400000 - \
-					CONFIG_SYS_MALLOC_LEN)
-
-#define CONFIG_SYS_PIOC_ASR_VAL		0xFFFF0000 /* PIOC as D16/D31 */
-#define CONFIG_SYS_PIOC_BSR_VAL		0x00000000
-#define CONFIG_SYS_PIOC_PDR_VAL		0xFFFF0000
-#define CONFIG_SYS_EBI_CSA_VAL		0x00000002 /* CS1=SDRAM */
-#define CONFIG_SYS_SDRC_CR_VAL		0x2188c159 /* set up the SDRAM */
-#define CONFIG_SYS_SDRAM		0x20000000 /* address of the SDRAM */
-#define CONFIG_SYS_SDRAM1		0x20000080 /* address of the SDRAM */
-#define CONFIG_SYS_SDRAM_VAL		0x00000000 /* value written to SDRAM */
-#define CONFIG_SYS_SDRC_MR_VAL		0x00000002 /* Precharge All */
-#define CONFIG_SYS_SDRC_MR_VAL1		0x00000004 /* refresh */
-#define CONFIG_SYS_SDRC_MR_VAL2		0x00000003 /* Load Mode Register */
-#define CONFIG_SYS_SDRC_MR_VAL3		0x00000000 /* Normal Mode */
-#define CONFIG_SYS_SDRC_TR_VAL		0x000002E0 /* Write refresh rate */
-
-/*
- * Command line configuration
- */
-#define CONFIG_CMD_BMP
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_PING
-#define CONFIG_I2C_CMD_TREE
-#define CONFIG_CMD_USB
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_UBI
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_CMD_UBIFS
-
-#define CONFIG_SYS_LONGHELP
-
-/*
- * MTD defines
- */
-
-#define CONFIG_FLASH_CFI_MTD
-#define CONFIG_MTD_DEVICE
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_RBTREE
-#define CONFIG_LZO
-
-#define MTDIDS_DEFAULT		"nor0=physmap-flash.0,nand0=atmel_nand"
-#define MTDPARTS_DEFAULT	"mtdparts="				\
-					"physmap-flash.0:"		\
-						"512k(U-Boot),"		\
-						"128k(Env),"		\
-						"128k(Splash),"		\
-						"4M(Kernel),"		\
-						"384k(MiniFS),"		\
-						"-(FS)"			\
-					";"				\
-					"atmel_nand:"			\
-						"1M(emergency),"	\
-						"-(data)"
-/*
- * Hardware drivers
- */
-#define CONFIG_USB_ATMEL
-#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
-#define CONFIG_USB_OHCI_NEW
-#define CONFIG_AT91C_PQFP_UHPBUG
-#define CONFIG_USB_STORAGE
-#define CONFIG_DOS_PARTITION
-#define CONFIG_ISO_PARTITION
-#define CONFIG_EFI_PARTITION
-
-#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	1
-#define CONFIG_SYS_USB_OHCI_CPU_INIT
-#define CONFIG_SYS_USB_OHCI_REGS_BASE		0x00300000
-#define CONFIG_SYS_USB_OHCI_SLOT_NAME		"at91rm9200"
-
-/*
- * UART/CONSOLE
- */
-
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_ATMEL_USART
-#define CONFIG_USART_BASE	ATMEL_BASE_DBGU
-#define CONFIG_USART_ID		0/* ignored in arm */
-
-/*
- * network
- */
-
-#define CONFIG_NET_RETRY_COUNT		10
-#define CONFIG_RESET_PHY_R		1
-
-#define CONFIG_DRIVER_AT91EMAC		1
-#define CONFIG_DRIVER_AT91EMAC_QUIET	1
-#define CONFIG_SYS_RX_ETH_BUFFER	8
-#define CONFIG_MII			1
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/*
- * I2C-Bus
- */
-
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_SOFT		/* I2C bit-banged */
-#define CONFIG_SYS_I2C_SOFT_SPEED	50000
-#define CONFIG_SYS_I2C_SOFT_SLAVE	0
-
-/* Software  I2C driver configuration */
-
-#define AT91_PIN_SDA			(1<<25)		/* AT91C_PIO_PA25 */
-#define AT91_PIN_SCL			(1<<26)		/* AT91C_PIO_PA26 */
-
-#define CONFIG_SYS_I2C_INIT_BOARD
-
-#define I2C_INIT	i2c_init_board();
-#define I2C_ACTIVE	writel(ATMEL_PMX_AA_TWD, &pio->pioa.mddr);
-#define I2C_TRISTATE	writel(ATMEL_PMX_AA_TWD, &pio->pioa.mder);
-#define I2C_READ	((readl(&pio->pioa.pdsr) & ATMEL_PMX_AA_TWD) != 0)
-#define I2C_SDA(bit)						\
-	if (bit)						\
-		writel(ATMEL_PMX_AA_TWD, &pio->pioa.sodr);	\
-	else							\
-		writel(ATMEL_PMX_AA_TWD, &pio->pioa.codr);
-#define I2C_SCL(bit)						\
-	if (bit)						\
-		writel(ATMEL_PMX_AA_TWCK, &pio->pioa.sodr);	\
-	else							\
-		writel(ATMEL_PMX_AA_TWCK, &pio->pioa.codr);
-
-#define I2C_DELAY	udelay(2500000/CONFIG_SYS_I2C_SOFT_SPEED)
-
-/* I2C-RTC */
-
-#ifdef CONFIG_CMD_DATE
-#define CONFIG_RTC_DS1338
-#define CONFIG_SYS_I2C_RTC_ADDR	0x68
-#endif
-
-/* EEPROM */
-
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
-#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
-
-/* FLASH organization */
-
-/*  NOR-FLASH */
-#define CONFIG_FLASH_SHOW_PROGRESS	45
-
-#define CONFIG_FLASH_CFI_DRIVER	1
-
-#define PHYS_FLASH_1			0x10000000
-#define PHYS_FLASH_SIZE			0x01000000  /* 16 megs main flash */
-#define CONFIG_SYS_FLASH_CFI		1
-#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
-
-#define CONFIG_SYS_FLASH_PROTECTION	1
-#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
-#define CONFIG_SYS_MAX_FLASH_BANKS	1
-#define CONFIG_SYS_MAX_FLASH_SECT	512
-#define CONFIG_SYS_FLASH_ERASE_TOUT	6000
-#define CONFIG_SYS_FLASH_WRITE_TOUT	2000
-
-/* NAND */
-
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_SYS_NAND_BASE		0x40000000
-#define CONFIG_SYS_NAND_DBW_8		1
-
-/* Status LED's */
-
-#define CONFIG_STATUS_LED		1
-#define CONFIG_BOARD_SPECIFIC_LED	1
-
-#define STATUS_LED_BOOT			1
-#define STATUS_LED_ACTIVE		0
-
-#define STATUS_LED_BIT			1	/* AT91C_PIO_PD0 green LED */
-#define STATUS_LED_PERIOD		(CONFIG_SYS_HZ / 2)
-#define STATUS_LED_STATE 		STATUS_LED_OFF		/* BLINKING */
-#define STATUS_LED_BIT1			2	/* AT91C_PIO_PD1  red LED */
-#define STATUS_LED_STATE1		STATUS_LED_ON		/* BLINKING */
-#define STATUS_LED_PERIOD1		(CONFIG_SYS_HZ / 4)
-
-#define	CONFIG_VIDEO			1
-
-/* Options */
-
-#ifdef CONFIG_VIDEO
-
-#define CONFIG_VIDEO_VCXK			1
-
-#define CONFIG_SPLASH_SCREEN			1
-
-#define CONFIG_SYS_VCXK_DEFAULT_LINEALIGN	4
-#define CONFIG_SYS_VCXK_BASE	0x30000000
-
-#define CONFIG_SYS_VCXK_ACKNOWLEDGE_PIN		(1<<3)
-#define CONFIG_SYS_VCXK_ACKNOWLEDGE_PORT	piob
-#define CONFIG_SYS_VCXK_ACKNOWLEDGE_DDR		odr
-
-#define CONFIG_SYS_VCXK_ENABLE_PIN		(1<<5)
-#define CONFIG_SYS_VCXK_ENABLE_PORT		piob
-#define CONFIG_SYS_VCXK_ENABLE_DDR		oer
-
-#define CONFIG_SYS_VCXK_REQUEST_PIN		(1<<2)
-#define CONFIG_SYS_VCXK_REQUEST_PORT		piob
-#define CONFIG_SYS_VCXK_REQUEST_DDR		oer
-
-#define CONFIG_SYS_VCXK_INVERT_PIN		(1<<4)
-#define CONFIG_SYS_VCXK_INVERT_PORT		piob
-#define CONFIG_SYS_VCXK_INVERT_DDR		oer
-
-#define CONFIG_SYS_VCXK_RESET_PIN		(1<<6)
-#define CONFIG_SYS_VCXK_RESET_PORT		piob
-#define CONFIG_SYS_VCXK_RESET_DDR		oer
-
-#endif	/* CONFIG_VIDEO */
-
-/* Environment */
-
-#define CONFIG_BOOTDELAY		5
-
-#define CONFIG_ENV_IS_IN_FLASH		1
-#define CONFIG_ENV_ADDR			(PHYS_FLASH_1 + 0x80000)
-#define CONFIG_ENV_SIZE			0x20000 /* sectors are 128K here */
-
-#define CONFIG_BAUDRATE 		115200
-
-#define CONFIG_BOOTCOMMAND		"run nfsboot"
-
-#define CONFIG_NFSBOOTCOMMAND 						\
-		"dhcp $(copy_addr) uImage_cpux9k2;"			\
-		"run bootargsdefaults;"					\
-		"set bootargs $(bootargs) boot=nfs "			\
-		";echo $(bootargs)"					\
-	";bootm"
-
-#define CONFIG_EXTRA_ENV_SETTINGS 					\
-	"displaywidth=256\0"						\
-	"displayheight=512\0"						\
-	"displaybsteps=1023\0"						\
-	"ubootaddr=10000000\0"						\
-	"splashimage=100A0000\0"					\
-	"kerneladdr=100C0000\0"						\
-	"kernelsize=00400000\0"						\
-	"rootfsaddr=10520000\0"						\
-	"copy_addr=21200000\0"						\
-	"rootfssize=00AE0000\0"						\
-	"mtdids=" MTDIDS_DEFAULT "\0"					\
-	"mtdparts=" MTDPARTS_DEFAULT "\0"				\
-	"bootargsdefaults=set bootargs "				\
-		"console=ttyS0,115200 "					\
-		"video=vcxk_fb:xres:${displaywidth},"			\
-			"yres:${displayheight},"			\
-			"bres:${displaybsteps} "			\
-		"mem=62M "						\
-		"panic=10 "						\
-		"uboot=\\\"${ver}\\\" "					\
-		"\0"							\
-	"update_kernel=protect off $(kerneladdr) +$(kernelsize);"	\
-		"dhcp $(copy_addr) uImage_cpux9k2;"			\
-		"erase $(kerneladdr) +$(kernelsize);"			\
-		"cp.b $(fileaddr) $(kerneladdr) $(filesize);"		\
-		"protect on $(kerneladdr) +$(kernelsize)"		\
-		"\0"							\
-	"update_root=protect off $(rootfsaddr) +$(rootfssize);"		\
-		"dhcp $(copy_addr) rfs;"				\
-		"erase $(rootfsaddr) +$(rootfssize);"			\
-		"cp.b $(fileaddr) $(rootfsaddr) $(filesize);"		\
-		"\0"							\
-	"update_uboot=protect off 10000000 1007FFFF;"			\
-		"dhcp $(copy_addr) u-boot_eb_cpux9k2;"			\
-		"erase 10000000 1007FFFF;"				\
-		"cp.b $(fileaddr) $(ubootaddr) $(filesize);"		\
-		"protect on 10000000 1007FFFF;reset\0"			\
-	"update_splash=protect off $(splashimage) +20000;"		\
-		"dhcp $(copy_addr) splash_eb_cpux9k2.bmp;"		\
-		"erase $(splashimage) +20000;"				\
-		"cp.b $(fileaddr) $(splashimage) $(filesize);"		\
-		"protect on $(splashimage) +20000;reset\0"		\
-	"emergency=run bootargsdefaults;"				\
-		"set bootargs $(bootargs) root=initramfs boot=emergency " \
-		";bootm $(kerneladdr)\0"				\
-	"netemergency=run bootargsdefaults;"				\
-		"dhcp $(copy_addr) uImage_cpux9k2;"			\
-		"set bootargs $(bootargs) root=initramfs boot=emergency " \
-		";bootm $(copy_addr)\0"					\
-	"norboot=run bootargsdefaults;"					\
-		"set bootargs $(bootargs) root=initramfs boot=local "	\
-		";bootm $(kerneladdr)\0"				\
-	"nandboot=run bootargsdefaults;"				\
-		"set bootargs $(bootargs) root=initramfs boot=nand "	\
-		";bootm $(kerneladdr)\0"				\
-	" "
-
-/*--------------------------------------------------------------------------*/
-
-#endif
-
-/* EOF */