diff options
| author | Marek Vasut <marex@denx.de> | 2014-10-22 21:34:48 +0200 |
|---|---|---|
| committer | Wolfgang Denk <wd@denx.de> | 2014-10-27 14:35:55 +0100 |
| commit | 5038d7f189267004d924e827cf51d7520d65e42b (patch) | |
| tree | 90b84cc661c559ae4878c0775cd135d32f5baa9c | |
| parent | 1655f9f6c73c2b4b5d3f3b3c8aab999c194d8486 (diff) | |
| download | blackbird-obmc-uboot-5038d7f189267004d924e827cf51d7520d65e42b.tar.gz blackbird-obmc-uboot-5038d7f189267004d924e827cf51d7520d65e42b.zip | |
ppc: Zap Hymod board
Remove this board as this is the only one last user of eeprom_probe(),
which is pretty non-standard stuff.
This patch also removes all the PHP, SQL and CSS stuff from U-Boot,
which probably makes U-Boot a bit less IoT ;-)
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Tom Rini <trini@ti.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Heiko Schocher <hs@denx.de>
47 files changed, 3 insertions, 6743 deletions
diff --git a/arch/powerpc/cpu/mpc8260/Kconfig b/arch/powerpc/cpu/mpc8260/Kconfig index 41e4e5f1ec..7f246ff5b9 100644 --- a/arch/powerpc/cpu/mpc8260/Kconfig +++ b/arch/powerpc/cpu/mpc8260/Kconfig @@ -28,9 +28,6 @@ config TARGET_EP82XXM config TARGET_GW8260 bool "Support gw8260" -config TARGET_HYMOD - bool "Support hymod" - config TARGET_IPHASE4539 bool "Support IPHASE4539" @@ -78,7 +75,6 @@ source "board/ep82xxm/Kconfig" source "board/freescale/mpc8266ads/Kconfig" source "board/funkwerk/vovpn-gw/Kconfig" source "board/gw8260/Kconfig" -source "board/hymod/Kconfig" source "board/ids/ids8247/Kconfig" source "board/iphase4539/Kconfig" source "board/keymile/km82xx/Kconfig" diff --git a/arch/powerpc/cpu/mpc8260/ether_fcc.c b/arch/powerpc/cpu/mpc8260/ether_fcc.c index d93a99109f..f9f15b59e5 100644 --- a/arch/powerpc/cpu/mpc8260/ether_fcc.c +++ b/arch/powerpc/cpu/mpc8260/ether_fcc.c @@ -645,32 +645,7 @@ eth_loopback_test (void) /* 28.9 - (1-2): ioports have been set up already */ -#if defined(CONFIG_HYMOD) - /* - * Attention: this is board-specific - * 0, FCC1 - * 1, FCC2 - * 2, FCC3 - */ -# define FCC_START_LOOP 0 -# define FCC_END_LOOP 2 - - /* - * Attention: this is board-specific - * - FCC1 Rx-CLK is CLK10 - * - FCC1 Tx-CLK is CLK11 - * - FCC2 Rx-CLK is CLK13 - * - FCC2 Tx-CLK is CLK14 - * - FCC3 Rx-CLK is CLK15 - * - FCC3 Tx-CLK is CLK16 - */ - - /* 28.9 - (3): connect FCC's tx and rx clocks */ - immr->im_cpmux.cmx_uar = 0; - immr->im_cpmux.cmx_fcr = CMXFCR_RF1CS_CLK10|CMXFCR_TF1CS_CLK11|\ - CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14|\ - CMXFCR_RF3CS_CLK15|CMXFCR_TF3CS_CLK16; -#elif defined(CONFIG_SACSng) +#if defined(CONFIG_SACSng) /* * Attention: this is board-specific * 1, FCC2 diff --git a/arch/powerpc/cpu/mpc8260/interrupts.c b/arch/powerpc/cpu/mpc8260/interrupts.c index 30125a7a73..41d2c04c85 100644 --- a/arch/powerpc/cpu/mpc8260/interrupts.c +++ b/arch/powerpc/cpu/mpc8260/interrupts.c @@ -142,15 +142,7 @@ int interrupt_init_cpu (unsigned *decrementer_count) immr->im_intctl.ic_sipnrh = 0xffffffff; immr->im_intctl.ic_sipnrl = 0xffffffff; -#ifdef CONFIG_HYMOD - /* - * ensure all external interrupt sources default to trigger on - * high-to-low transition (i.e. edge triggered active low) - */ - immr->im_intctl.ic_siexr = -1; -#endif - - return (0); + return 0; } /****************************************************************************/ diff --git a/arch/powerpc/cpu/mpc8260/start.S b/arch/powerpc/cpu/mpc8260/start.S index d7eaf13e0b..5f1e174ec8 100644 --- a/arch/powerpc/cpu/mpc8260/start.S +++ b/arch/powerpc/cpu/mpc8260/start.S @@ -48,9 +48,6 @@ GOT_ENTRY(__init_end) GOT_ENTRY(__bss_end) GOT_ENTRY(__bss_start) -#if defined(CONFIG_HYMOD) - GOT_ENTRY(environment) -#endif END_GOT /* @@ -878,18 +875,7 @@ clear_bss: * Now clear BSS segment */ lwz r3,GOT(__bss_start) -#if defined(CONFIG_HYMOD) - /* - * For HYMOD - the environment is the very last item in flash. - * The real .bss stops just before environment starts, so only - * clear up to that point. - * - * taken from mods for FADS board - */ - lwz r4,GOT(environment) -#else lwz r4,GOT(__bss_end) -#endif cmplw 0, r3, r4 beq 6f diff --git a/arch/powerpc/cpu/mpc83xx/start.S b/arch/powerpc/cpu/mpc83xx/start.S index 36724e5aa5..af75c63eb3 100644 --- a/arch/powerpc/cpu/mpc83xx/start.S +++ b/arch/powerpc/cpu/mpc83xx/start.S @@ -958,18 +958,7 @@ clear_bss: * Now clear BSS segment */ lwz r3,GOT(__bss_start) -#if defined(CONFIG_HYMOD) - /* - * For HYMOD - the environment is the very last item in flash. - * The real .bss stops just before environment starts, so only - * clear up to that point. - * - * taken from mods for FADS board - */ - lwz r4,GOT(environment) -#else lwz r4,GOT(__bss_end) -#endif cmplw 0, r3, r4 beq 6f diff --git a/arch/powerpc/include/asm/u-boot.h b/arch/powerpc/include/asm/u-boot.h index e1b566fa56..a61e998df6 100644 --- a/arch/powerpc/include/asm/u-boot.h +++ b/arch/powerpc/include/asm/u-boot.h @@ -77,9 +77,6 @@ typedef struct bd_info { unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */ unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */ #endif -#if defined(CONFIG_HYMOD) - hymod_conf_t bi_hymod_conf; /* hymod configuration information */ -#endif #ifdef CONFIG_HAS_ETH1 unsigned char bi_enet1addr[6]; /* OLD: see README.enetaddr */ diff --git a/board/hymod/Kconfig b/board/hymod/Kconfig deleted file mode 100644 index fa162ebc96..0000000000 --- a/board/hymod/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -if TARGET_HYMOD - -config SYS_BOARD - default "hymod" - -config SYS_CONFIG_NAME - default "hymod" - -endif diff --git a/board/hymod/MAINTAINERS b/board/hymod/MAINTAINERS deleted file mode 100644 index e27fe974c8..0000000000 --- a/board/hymod/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -HYMOD BOARD -M: Murray Jensen <Murray.Jensen@csiro.au> -S: Maintained -F: board/hymod/ -F: include/configs/hymod.h -F: configs/hymod_defconfig diff --git a/board/hymod/Makefile b/board/hymod/Makefile deleted file mode 100644 index b9080b0a96..0000000000 --- a/board/hymod/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = hymod.o flash.o bsp.o eeprom.o fetch.o input.o env.o diff --git a/board/hymod/bsp.c b/board/hymod/bsp.c deleted file mode 100644 index e54640f2d2..0000000000 --- a/board/hymod/bsp.c +++ /dev/null @@ -1,387 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - * - * hacked for Hymod FPGA support by Murray.Jensen@csiro.au, 29-Jan-01 - */ - -#include <common.h> -#include <command.h> -#include <net.h> -#include <asm/iopin_8260.h> - -DECLARE_GLOBAL_DATA_PTR; - -/*----------------------------------------------------------------------- - * Board Special Commands: FPGA load/store, EEPROM erase - */ - -#if defined(CONFIG_CMD_BSP) - -#define LOAD_SUCCESS 0 -#define LOAD_FAIL_NOCONF 1 -#define LOAD_FAIL_NOINIT 2 -#define LOAD_FAIL_NODONE 3 - -#define STORE_SUCCESS 0 - -/* - * Programming the Hymod FPGAs - * - * The 8260 io port config table is set up so that the INIT pin is - * held Low (Open Drain output 0) - this will delay the automatic - * Power-On config until INIT is released (by making it an input). - * - * If the FPGA has been programmed before, then the assertion of PROGRAM - * will initiate configuration (i.e. it begins clearing the RAM). - * - * When the FPGA is ready to receive configuration data (either after - * releasing INIT after Power-On, or after asserting PROGRAM), it will - * pull INIT high. - * - * Notes from Paul Dunn: - * - * 1. program pin should be forced low for >= 300ns - * (about 20 bus clock cycles minimum). - * - * 2. then wait for init to go high, which signals - * that the FPGA has cleared its internal memory - * and is ready to load - * - * 3. perform load writes of entire config file - * - * 4. wait for done to go high, which should be - * within a few bus clock cycles. If done has not - * gone high after reasonable period, then load - * has not worked (wait several ms?) - */ - -int -fpga_load(int mezz, const uchar *addr, ulong size) -{ - hymod_conf_t *cp = &gd->bd->bi_hymod_conf; - xlx_info_t *fp; - xlx_iopins_t *fpgaio; - volatile uchar *fpgabase; - volatile uint cnt; - const uchar *eaddr = addr + size; - int result; - - if (mezz) - fp = &cp->mezz.xlx[0]; - else - fp = &cp->main.xlx[0]; - - if (!fp->mmap.prog.exists) - return (LOAD_FAIL_NOCONF); - - fpgabase = (uchar *)fp->mmap.prog.base; - fpgaio = &fp->iopins; - - /* set enable HIGH if required */ - if (fpgaio->enable_pin.flag) - iopin_set_high (&fpgaio->enable_pin); - - /* ensure INIT is released (set it to be an input) */ - iopin_set_in (&fpgaio->init_pin); - - /* toggle PROG Low then High (will already be Low after Power-On) */ - iopin_set_low (&fpgaio->prog_pin); - udelay (1); /* minimum 300ns - 1usec should do it */ - iopin_set_high (&fpgaio->prog_pin); - - /* wait for INIT High */ - cnt = 0; - while (!iopin_is_high (&fpgaio->init_pin)) - if (++cnt == 10000000) { - result = LOAD_FAIL_NOINIT; - goto done; - } - - /* write configuration data */ - while (addr < eaddr) - *fpgabase = *addr++; - - /* wait for DONE High */ - cnt = 0; - while (!iopin_is_high (&fpgaio->done_pin)) - if (++cnt == 100000000) { - result = LOAD_FAIL_NODONE; - goto done; - } - - /* success */ - result = LOAD_SUCCESS; - - done: - - if (fpgaio->enable_pin.flag) - iopin_set_low (&fpgaio->enable_pin); - - return (result); -} - -/* ------------------------------------------------------------------------- */ -int -do_fpga (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) -{ - uchar *addr, *save_addr; - ulong size; - int mezz, arg, result; - - switch (argc) { - - case 0: - case 1: - break; - - case 2: - if (strcmp (argv[1], "info") == 0) { - printf ("\nHymod FPGA Info...\n"); - printf ("\t\t\t\tAddress\t\tSize\n"); - printf ("\tMain Configuration:\t0x%08x\t%d\n", - FPGA_MAIN_CFG_BASE, FPGA_MAIN_CFG_SIZE); - printf ("\tMain Register:\t\t0x%08x\t%d\n", - FPGA_MAIN_REG_BASE, FPGA_MAIN_REG_SIZE); - printf ("\tMain Port:\t\t0x%08x\t%d\n", - FPGA_MAIN_PORT_BASE, FPGA_MAIN_PORT_SIZE); - printf ("\tMezz Configuration:\t0x%08x\t%d\n", - FPGA_MEZZ_CFG_BASE, FPGA_MEZZ_CFG_SIZE); - return 0; - } - break; - - case 3: - if (strcmp (argv[1], "store") == 0) { - addr = (uchar *) simple_strtoul (argv[2], NULL, 16); - - save_addr = addr; -#if 0 - /* fpga readback unimplemented */ - while (more readback data) - *addr++ = *fpga; - result = error ? STORE_FAIL_XXX : STORE_SUCCESS; -#else - result = STORE_SUCCESS; -#endif - - if (result == STORE_SUCCESS) { - printf ("SUCCEEDED (%d bytes)\n", - addr - save_addr); - return 0; - } else - printf ("FAILED (%d bytes)\n", - addr - save_addr); - return 1; - } - break; - - case 4: - if (strcmp (argv[1], "tftp") == 0) { - copy_filename (BootFile, argv[2], sizeof (BootFile)); - load_addr = simple_strtoul (argv[3], NULL, 16); - NetBootFileXferSize = 0; - - if (NetLoop(TFTPGET) <= 0) { - printf ("tftp transfer failed - aborting " - "fgpa load\n"); - return 1; - } - - if (NetBootFileXferSize == 0) { - printf ("can't determine file size - " - "aborting fpga load\n"); - return 1; - } - - printf ("File transfer succeeded - " - "beginning fpga load..."); - - result = fpga_load (0, (uchar *) load_addr, - NetBootFileXferSize); - - if (result == LOAD_SUCCESS) { - printf ("SUCCEEDED\n"); - return 0; - } else if (result == LOAD_FAIL_NOCONF) - printf ("FAILED (no CONF)\n"); - else if (result == LOAD_FAIL_NOINIT) - printf ("FAILED (no INIT)\n"); - else - printf ("FAILED (no DONE)\n"); - return 1; - - } - /* fall through ... */ - - case 5: - if (strcmp (argv[1], "load") == 0) { - if (argc == 5) { - if (strcmp (argv[2], "main") == 0) - mezz = 0; - else if (strcmp (argv[2], "mezz") == 0) - mezz = 1; - else { - printf ("FPGA type must be either " - "`main' or `mezz'\n"); - return 1; - } - arg = 3; - } else { - mezz = 0; - arg = 2; - } - - addr = (uchar *) simple_strtoul (argv[arg++], NULL, 16); - size = (ulong) simple_strtoul (argv[arg], NULL, 16); - - result = fpga_load (mezz, addr, size); - - if (result == LOAD_SUCCESS) { - printf ("SUCCEEDED\n"); - return 0; - } else if (result == LOAD_FAIL_NOCONF) - printf ("FAILED (no CONF)\n"); - else if (result == LOAD_FAIL_NOINIT) - printf ("FAILED (no INIT)\n"); - else - printf ("FAILED (no DONE)\n"); - return 1; - } - break; - - default: - break; - } - - return cmd_usage(cmdtp); -} -U_BOOT_CMD( - fpga, 6, 1, do_fpga, - "FPGA sub-system", - "load [type] addr size\n" - " - write the configuration data at memory address `addr',\n" - " size `size' bytes, into the FPGA of type `type' (either\n" - " `main' or `mezz', default `main'). e.g.\n" - " `fpga load 100000 7d8f'\n" - " loads the main FPGA with config data at address 100000\n" - " HEX, size 7d8f HEX (32143 DEC) bytes\n" - "fpga tftp file addr\n" - " - transfers `file' from the tftp server into memory at\n" - " address `addr', then writes the entire file contents\n" - " into the main FPGA\n" - "fpga store addr\n" - " - read configuration data from the main FPGA (the mezz\n" - " FPGA is write-only), into address `addr'. There must be\n" - " enough memory available at `addr' to hold all the config\n" - " data - the size of which is determined by VC:???\n" - "fpga info\n" - " - print information about the Hymod FPGA, namely the\n" - " memory addresses at which the four FPGA local bus\n" - " address spaces appear in the physical address space" -); -/* ------------------------------------------------------------------------- */ -int -do_eecl (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) -{ - uchar data[HYMOD_EEPROM_SIZE]; - uint addr = CONFIG_SYS_I2C_EEPROM_ADDR; - - switch (argc) { - - case 1: - addr |= HYMOD_EEOFF_MAIN; - break; - - case 2: - if (strcmp (argv[1], "main") == 0) { - addr |= HYMOD_EEOFF_MAIN; - break; - } - if (strcmp (argv[1], "mezz") == 0) { - addr |= HYMOD_EEOFF_MEZZ; - break; - } - /* fall through ... */ - - default: - return cmd_usage(cmdtp); - } - - memset (data, 0, HYMOD_EEPROM_SIZE); - - eeprom_write (addr, 0, data, HYMOD_EEPROM_SIZE); - - return 0; -} -U_BOOT_CMD( - eeclear, 1, 0, do_eecl, - "Clear the eeprom on a Hymod board", - "[type]\n" - " - write zeroes into the EEPROM on the board of type `type'\n" - " (`type' is either `main' or `mezz' - default `main')\n" - " Note: the EEPROM write enable jumper must be installed" -); - -/* ------------------------------------------------------------------------- */ - -int -do_htest (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ -#if 0 - int rc; -#endif -#ifdef CONFIG_ETHER_LOOPBACK_TEST - extern void eth_loopback_test (void); -#endif /* CONFIG_ETHER_LOOPBACK_TEST */ - - printf ("HYMOD tests - ensure loopbacks etc. are connected\n\n"); - -#if 0 - /* Load FPGA with test program */ - - printf ("Loading test FPGA program ..."); - - rc = fpga_load (0, test_bitfile, sizeof (test_bitfile)); - - switch (rc) { - - case LOAD_SUCCESS: - printf (" SUCCEEDED\n"); - break; - - case LOAD_FAIL_NOCONF: - printf (" FAILED (no configuration space defined)\n"); - return 1; - - case LOAD_FAIL_NOINIT: - printf (" FAILED (timeout - no INIT signal seen)\n"); - return 1; - - case LOAD_FAIL_NODONE: - printf (" FAILED (timeout - no DONE signal seen)\n"); - return 1; - - default: - printf (" FAILED (unknown return code from fpga_load\n"); - return 1; - } - - /* run Local Bus <=> Xilinx tests */ - - /* tell Xilinx to run ZBT Ram, High Speed serial and Mezzanine tests */ - - /* run SDRAM test */ -#endif - -#ifdef CONFIG_ETHER_LOOPBACK_TEST - /* run Ethernet test */ - eth_loopback_test (); -#endif /* CONFIG_ETHER_LOOPBACK_TEST */ - - return 0; -} - -#endif diff --git a/board/hymod/config.mk b/board/hymod/config.mk deleted file mode 100644 index 2eeea50377..0000000000 --- a/board/hymod/config.mk +++ /dev/null @@ -1,14 +0,0 @@ -# -# (C) Copyright 2000 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -# -# HYMOD boards -# - -PLATFORM_CPPFLAGS += -I$(srctree) - -OBJCOPYFLAGS = --remove-section=.ppcenv diff --git a/board/hymod/eeprom.c b/board/hymod/eeprom.c deleted file mode 100644 index ffb0df1976..0000000000 --- a/board/hymod/eeprom.c +++ /dev/null @@ -1,678 +0,0 @@ -/* - * (C) Copyright 2001 - * Murray Jensen, CSIRO-MIT, <Murray.Jensen@csiro.au> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <mpc8260.h> - -/* imports from fetch.c */ -extern int fetch_and_parse (char *, ulong, int (*)(uchar *, uchar *)); - -/* imports from input.c */ -extern int hymod_get_serno (const char *); - -/* this is relative to the root of the server's tftp directory */ -static char *def_bddb_cfgdir = "/hymod/bddb"; - -static int -hymod_eeprom_load (int which, hymod_eeprom_t *ep) -{ - unsigned dev_addr = CONFIG_SYS_I2C_EEPROM_ADDR | \ - (which ? HYMOD_EEOFF_MEZZ : HYMOD_EEOFF_MAIN); - unsigned offset = 0; - uchar data[HYMOD_EEPROM_MAXLEN], *dp, *edp; - hymod_eehdr_t hdr; - ulong len, crc; - - memset (ep, 0, sizeof *ep); - - eeprom_read (dev_addr, offset, (uchar *)&hdr, sizeof (hdr)); - offset += sizeof (hdr); - - if (hdr.id != HYMOD_EEPROM_ID || hdr.ver > HYMOD_EEPROM_VER || - (len = hdr.len) > HYMOD_EEPROM_MAXLEN) - return (0); - - eeprom_read (dev_addr, offset, data, len); - offset += len; - - eeprom_read (dev_addr, offset, (uchar *)&crc, sizeof (ulong)); - offset += sizeof (ulong); - - if (crc32 (crc32 (0, (uchar *)&hdr, sizeof hdr), data, len) != crc) - return (0); - - ep->ver = hdr.ver; - dp = data; edp = dp + len; - - for (;;) { - ulong rtyp; - uchar rlen, *rdat; - - rtyp = *dp++; - if ((rtyp & 0x80) == 0) - rlen = *dp++; - else { - uchar islarge = rtyp & 0x40; - - rtyp = ((rtyp & 0x3f) << 8) | *dp++; - if (islarge) { - rtyp = (rtyp << 8) | *dp++; - rtyp = (rtyp << 8) | *dp++; - } - - rlen = *dp++; - rlen = (rlen << 8) | *dp++; - if (islarge) { - rlen = (rlen << 8) | *dp++; - rlen = (rlen << 8) | *dp++; - } - } - - if (rtyp == 0) - break; - - rdat = dp; - dp += rlen; - - if (dp > edp) /* error? */ - break; - - switch (rtyp) { - - case HYMOD_EEREC_SERNO: /* serial number */ - if (rlen == sizeof (ulong)) - ep->serno = \ - ((ulong)rdat[0] << 24) | \ - ((ulong)rdat[1] << 16) | \ - ((ulong)rdat[2] << 8) | \ - (ulong)rdat[3]; - break; - - case HYMOD_EEREC_DATE: /* date */ - if (rlen == sizeof (hymod_date_t)) { - ep->date.year = ((ushort)rdat[0] << 8) | \ - (ushort)rdat[1]; - ep->date.month = rdat[2]; - ep->date.day = rdat[3]; - } - break; - - case HYMOD_EEREC_BATCH: /* batch */ - if (rlen <= HYMOD_MAX_BATCH) - memcpy (ep->batch, rdat, ep->batchlen = rlen); - break; - - case HYMOD_EEREC_TYPE: /* board type */ - if (rlen == 1) - ep->bdtype = *rdat; - break; - - case HYMOD_EEREC_REV: /* board revision */ - if (rlen == 1) - ep->bdrev = *rdat; - break; - - case HYMOD_EEREC_SDRAM: /* sdram size(s) */ - if (rlen > 0 && rlen <= HYMOD_MAX_SDRAM) { - int i; - - for (i = 0; i < rlen; i++) - ep->sdramsz[i] = rdat[i]; - ep->nsdram = rlen; - } - break; - - case HYMOD_EEREC_FLASH: /* flash size(s) */ - if (rlen > 0 && rlen <= HYMOD_MAX_FLASH) { - int i; - - for (i = 0; i < rlen; i++) - ep->flashsz[i] = rdat[i]; - ep->nflash = rlen; - } - break; - - case HYMOD_EEREC_ZBT: /* zbt ram size(s) */ - if (rlen > 0 && rlen <= HYMOD_MAX_ZBT) { - int i; - - for (i = 0; i < rlen; i++) - ep->zbtsz[i] = rdat[i]; - ep->nzbt = rlen; - } - break; - - case HYMOD_EEREC_XLXTYP: /* xilinx fpga type(s) */ - if (rlen > 0 && rlen <= HYMOD_MAX_XLX) { - int i; - - for (i = 0; i < rlen; i++) - ep->xlx[i].type = rdat[i]; - ep->nxlx = rlen; - } - break; - - case HYMOD_EEREC_XLXSPD: /* xilinx fpga speed(s) */ - if (rlen > 0 && rlen <= HYMOD_MAX_XLX) { - int i; - - for (i = 0; i < rlen; i++) - ep->xlx[i].speed = rdat[i]; - } - break; - - case HYMOD_EEREC_XLXTMP: /* xilinx fpga temperature(s) */ - if (rlen > 0 && rlen <= HYMOD_MAX_XLX) { - int i; - - for (i = 0; i < rlen; i++) - ep->xlx[i].temp = rdat[i]; - } - break; - - case HYMOD_EEREC_XLXGRD: /* xilinx fpga grade(s) */ - if (rlen > 0 && rlen <= HYMOD_MAX_XLX) { - int i; - - for (i = 0; i < rlen; i++) - ep->xlx[i].grade = rdat[i]; - } - break; - - case HYMOD_EEREC_CPUTYP: /* CPU type */ - if (rlen == 1) - ep->mpc.type = *rdat; - break; - - case HYMOD_EEREC_CPUSPD: /* CPU speed */ - if (rlen == 1) - ep->mpc.cpuspd = *rdat; - break; - - case HYMOD_EEREC_CPMSPD: /* CPM speed */ - if (rlen == 1) - ep->mpc.cpmspd = *rdat; - break; - - case HYMOD_EEREC_BUSSPD: /* bus speed */ - if (rlen == 1) - ep->mpc.busspd = *rdat; - break; - - case HYMOD_EEREC_HSTYPE: /* hs-serial chip type */ - if (rlen == 1) - ep->hss.type = *rdat; - break; - - case HYMOD_EEREC_HSCHIN: /* num hs-serial input chans */ - if (rlen == 1) - ep->hss.nchin = *rdat; - break; - - case HYMOD_EEREC_HSCHOUT: /* num hs-serial output chans */ - if (rlen == 1) - ep->hss.nchout = *rdat; - break; - - default: /* ignore */ - break; - } - } - - return (1); -} - -/* maps an ascii "name=value" into a binary eeprom data record */ -typedef - struct _eerec_map { - char *name; - uint type; - uchar *(*handler) \ - (struct _eerec_map *, uchar *, uchar *, uchar *); - uint length; - uint maxlen; - } -eerec_map_t; - -static uchar * -uint_handler (eerec_map_t *rp, uchar *val, uchar *dp, uchar *edp) -{ - char *eval; - ulong lval; - - lval = simple_strtol ((char *)val, &eval, 10); - - if ((uchar *)eval == val || *eval != '\0') { - printf ("%s rec (%s) is not a valid uint\n", rp->name, val); - return (NULL); - } - - if (dp + 2 + rp->length > edp) { - printf ("can't fit %s rec into eeprom\n", rp->name); - return (NULL); - } - - *dp++ = rp->type; - *dp++ = rp->length; - - switch (rp->length) { - - case 1: - if (lval >= 256) { - printf ("%s rec value (%lu) out of range (0-255)\n", - rp->name, lval); - return (NULL); - } - *dp++ = lval; - break; - - case 2: - if (lval >= 65536) { - printf ("%s rec value (%lu) out of range (0-65535)\n", - rp->name, lval); - return (NULL); - } - *dp++ = lval >> 8; - *dp++ = lval; - break; - - case 4: - *dp++ = lval >> 24; - *dp++ = lval >> 16; - *dp++ = lval >> 8; - *dp++ = lval; - break; - - default: - printf ("huh? rp->length not 1, 2 or 4! (%d)\n", rp->length); - return (NULL); - } - - return (dp); -} - -static uchar * -date_handler (eerec_map_t *rp, uchar *val, uchar *dp, uchar *edp) -{ - hymod_date_t date; - char *p = (char *)val; - char *ep; - ulong lval; - - lval = simple_strtol (p, &ep, 10); - if (ep == p || *ep++ != '-') { -bad_date: - printf ("%s rec (%s) is not a valid date\n", rp->name, val); - return (NULL); - } - if (lval >= 65536) - goto bad_date; - date.year = lval; - - lval = simple_strtol (p = ep, &ep, 10); - if (ep == p || *ep++ != '-' || lval == 0 || lval > 12) - goto bad_date; - date.month = lval; - - lval = simple_strtol (p = ep, &ep, 10); - if (ep == p || *ep != '\0' || lval == 0 || lval > 31) - goto bad_date; - date.day = lval; - - if (dp + 2 + rp->length > edp) { - printf ("can't fit %s rec into eeprom\n", rp->name); - return (NULL); - } - - *dp++ = rp->type; - *dp++ = rp->length; - *dp++ = date.year >> 8; - *dp++ = date.year; - *dp++ = date.month; - *dp++ = date.day; - - return (dp); -} - -static uchar * -string_handler (eerec_map_t *rp, uchar *val, uchar *dp, uchar *edp) -{ - uint len; - - if ((len = strlen ((char *)val)) > rp->maxlen) { - printf ("%s rec (%s) string is too long (%d>%d)\n", - rp->name, val, len, rp->maxlen); - return (NULL); - } - - if (dp + 2 + len > edp) { - printf ("can't fit %s rec into eeprom\n", rp->name); - return (NULL); - } - - *dp++ = rp->type; - *dp++ = len; - memcpy (dp, val, len); - dp += len; - - return (dp); -} - -static uchar * -bytes_handler (eerec_map_t *rp, uchar *val, uchar *dp, uchar *edp) -{ - uchar bytes[HYMOD_MAX_BYTES], nbytes, *p; - char *ep; - - for (nbytes = 0, p = val; *p != '\0'; p = (uchar *)ep) { - ulong lval; - - lval = simple_strtol ((char *)p, &ep, 10); - if ((uchar *)ep == p || (*ep != '\0' && *ep != ',') || \ - lval >= 256) { - printf ("%s rec (%s) byte array has invalid uint\n", - rp->name, val); - return (NULL); - } - if (nbytes >= HYMOD_MAX_BYTES) { - printf ("%s rec (%s) byte array too long\n", - rp->name, val); - return (NULL); - } - bytes[nbytes++] = lval; - - if (*ep != '\0') - ep++; - } - - if (dp + 2 + nbytes > edp) { - printf ("can't fit %s rec into eeprom\n", rp->name); - return (NULL); - } - - *dp++ = rp->type; - *dp++ = nbytes; - memcpy (dp, bytes, nbytes); - dp += nbytes; - - return (dp); -} - -static eerec_map_t eerec_map[] = { - /* name type handler len max */ - { "serno", HYMOD_EEREC_SERNO, uint_handler, 4, 0 }, - { "date", HYMOD_EEREC_DATE, date_handler, 4, 0 }, - { "batch", HYMOD_EEREC_BATCH, string_handler, 0, HYMOD_MAX_BATCH }, - { "type", HYMOD_EEREC_TYPE, uint_handler, 1, 0 }, - { "rev", HYMOD_EEREC_REV, uint_handler, 1, 0 }, - { "sdram", HYMOD_EEREC_SDRAM, bytes_handler, 0, HYMOD_MAX_SDRAM }, - { "flash", HYMOD_EEREC_FLASH, bytes_handler, 0, HYMOD_MAX_FLASH }, - { "zbt", HYMOD_EEREC_ZBT, bytes_handler, 0, HYMOD_MAX_ZBT }, - { "xlxtyp", HYMOD_EEREC_XLXTYP, bytes_handler, 0, HYMOD_MAX_XLX }, - { "xlxspd", HYMOD_EEREC_XLXSPD, bytes_handler, 0, HYMOD_MAX_XLX }, - { "xlxtmp", HYMOD_EEREC_XLXTMP, bytes_handler, 0, HYMOD_MAX_XLX }, - { "xlxgrd", HYMOD_EEREC_XLXGRD, bytes_handler, 0, HYMOD_MAX_XLX }, - { "cputyp", HYMOD_EEREC_CPUTYP, uint_handler, 1, 0 }, - { "cpuspd", HYMOD_EEREC_CPUSPD, uint_handler, 1, 0 }, - { "cpmspd", HYMOD_EEREC_CPMSPD, uint_handler, 1, 0 }, - { "busspd", HYMOD_EEREC_BUSSPD, uint_handler, 1, 0 }, - { "hstype", HYMOD_EEREC_HSTYPE, uint_handler, 1, 0 }, - { "hschin", HYMOD_EEREC_HSCHIN, uint_handler, 1, 0 }, - { "hschout", HYMOD_EEREC_HSCHOUT, uint_handler, 1, 0 }, -}; - -static int neerecs = sizeof eerec_map / sizeof eerec_map[0]; - -static uchar data[HYMOD_EEPROM_SIZE], *sdp, *dp, *edp; - -static int -eerec_callback (uchar *name, uchar *val) -{ - eerec_map_t *rp; - - for (rp = eerec_map; rp < &eerec_map[neerecs]; rp++) - if (strcmp ((char *)name, rp->name) == 0) - break; - - if (rp >= &eerec_map[neerecs]) - return (0); - - if ((dp = (*rp->handler) (rp, val, dp, edp)) == NULL) - return (0); - - return (1); -} - -static int -hymod_eeprom_fetch(int which, char *filename, ulong addr) -{ - unsigned dev_addr = CONFIG_SYS_I2C_EEPROM_ADDR | \ - (which ? HYMOD_EEOFF_MEZZ : HYMOD_EEOFF_MAIN); - hymod_eehdr_t *hp = (hymod_eehdr_t *)&data[0]; - ulong crc; - - memset (hp, 0, sizeof *hp); - hp->id = HYMOD_EEPROM_ID; - hp->ver = HYMOD_EEPROM_VER; - - dp = sdp = (uchar *)(hp + 1); - edp = dp + HYMOD_EEPROM_MAXLEN; - - if (fetch_and_parse (filename, addr, eerec_callback) == 0) - return (0); - - hp->len = dp - sdp; - - crc = crc32 (0, data, dp - data); - memcpy (dp, &crc, sizeof (ulong)); - dp += sizeof (ulong); - - eeprom_write (dev_addr, 0, data, dp - data); - - return (1); -} - -static char *type_vals[] = { - "NONE", "IO", "CLP", "DSP", "INPUT", "ALT-INPUT", "DISPLAY" -}; - -static char *xlxtyp_vals[] = { - "NONE", "XCV300E", "XCV400E", "XCV600E" -}; - -static char *xlxspd_vals[] = { - "NONE", "6", "7", "8" -}; - -static char *xlxtmp_vals[] = { - "NONE", "COM", "IND" -}; - -static char *xlxgrd_vals[] = { - "NONE", "NORMAL", "ENGSAMP" -}; - -static char *cputyp_vals[] = { - "NONE", "MPC8260" -}; - -static char *clk_vals[] = { - "NONE", "33", "66", "100", "133", "166", "200" -}; - -static char *hstype_vals[] = { - "NONE", "AMCC-S2064A" -}; - -static void -print_mem (char *l, char *s, uchar n, uchar a[]) -{ - if (n > 0) { - if (n == 1) - printf ("%s%dMB %s", s, 1 << (a[0] - 20), l); - else { - ulong t = 0; - int i; - - for (i = 0; i < n; i++) - t += 1 << (a[i] - 20); - - printf ("%s%luMB %s (%d banks:", s, t, l, n); - - for (i = 0; i < n; i++) - printf ("%dMB%s", - 1 << (a[i] - 20), - (i == n - 1) ? ")" : ","); - } - } - else - printf ("%sNO %s", s, l); -} - -void -hymod_eeprom_print (hymod_eeprom_t *ep) -{ - int i; - - printf (" Hymod %s board, rev %03d\n", - type_vals[ep->bdtype], ep->bdrev); - - printf (" serial #: %010lu, date %04d-%02d-%02d", - ep->serno, ep->date.year, ep->date.month, ep->date.day); - if (ep->batchlen > 0) - printf (", batch \"%.*s\"", ep->batchlen, ep->batch); - puts ("\n"); - - switch (ep->bdtype) { - - case HYMOD_BDTYPE_IO: - case HYMOD_BDTYPE_CLP: - case HYMOD_BDTYPE_DSP: - printf (" Motorola %s CPU, speeds: %s/%s/%s", - cputyp_vals[ep->mpc.type], clk_vals[ep->mpc.cpuspd], - clk_vals[ep->mpc.cpmspd], clk_vals[ep->mpc.busspd]); - - print_mem ("SDRAM", ", ", ep->nsdram, ep->sdramsz); - - print_mem ("FLASH", ", ", ep->nflash, ep->flashsz); - - puts ("\n"); - - print_mem ("ZBT", " ", ep->nzbt, ep->zbtsz); - - if (ep->nxlx > 0) { - hymod_xlx_t *xp; - - if (ep->nxlx == 1) { - xp = &ep->xlx[0]; - printf (", Xilinx %s FPGA (%s/%s/%s)", - xlxtyp_vals[xp->type], - xlxspd_vals[xp->speed], - xlxtmp_vals[xp->temp], - xlxgrd_vals[xp->grade]); - } - else { - printf (", %d Xilinx FPGAs (", ep->nxlx); - for (i = 0; i < ep->nxlx; i++) { - xp = &ep->xlx[i]; - printf ("%s[%s/%s/%s]%s", - xlxtyp_vals[xp->type], - xlxspd_vals[xp->speed], - xlxtmp_vals[xp->temp], - xlxgrd_vals[xp->grade], - (i == ep->nxlx - 1) ? ")" : ", "); - } - } - } - else - puts(", NO FPGAs"); - - puts ("\n"); - - if (ep->hss.type > 0) - printf (" High Speed Serial: " - "%s, %d input%s, %d output%s\n", - hstype_vals[ep->hss.type], - ep->hss.nchin, - (ep->hss.nchin == 1 ? "" : "s"), - ep->hss.nchout, - (ep->hss.nchout == 1 ? "" : "s")); - break; - - case HYMOD_BDTYPE_INPUT: - case HYMOD_BDTYPE_ALTINPUT: - case HYMOD_BDTYPE_DISPLAY: - break; - - default: - /* crap! */ - printf (" UNKNOWN BOARD TYPE: %d\n", ep->bdtype); - break; - } -} - -int -hymod_eeprom_read (int which, hymod_eeprom_t *ep) -{ - char *label = which ? "mezzanine" : "main"; - unsigned dev_addr = CONFIG_SYS_I2C_EEPROM_ADDR | \ - (which ? HYMOD_EEOFF_MEZZ : HYMOD_EEOFF_MAIN); - char filename[50], prompt[50], *dir; - int serno, count = 0, rc; - - rc = eeprom_probe (dev_addr, 0); - - if (rc > 0) { - printf ("*** probe for eeprom failed with code %d\n", rc); - return (0); - } - - if (rc < 0) - return (rc); - - sprintf (prompt, "Enter %s board serial number: ", label); - - if ((dir = getenv ("bddb_cfgdir")) == NULL) - dir = def_bddb_cfgdir; - - for (;;) { - int rc; - - if (hymod_eeprom_load (which, ep)) - return (1); - - printf ("*** %s board EEPROM contents are %sinvalid\n", - label, count == 0 ? "" : "STILL "); - - puts ("*** will fetch from server (Ctrl-C to abort)\n"); - - serno = hymod_get_serno (prompt); - - if (serno < 0) { - if (serno == -1) - puts ("\n*** interrupted!"); - else - puts ("\n*** timeout!"); - puts (" - ignoring eeprom contents\n"); - return (0); - } - - sprintf (filename, "%s/%010d.cfg", dir, serno); - - printf ("*** fetching %s board EEPROM contents from server\n", - label); - - rc = hymod_eeprom_fetch (which, filename, CONFIG_SYS_LOAD_ADDR); - - if (rc == 0) { - puts ("*** fetch failed - ignoring eeprom contents\n"); - return (0); - } - - count++; - } -} diff --git a/board/hymod/env.c b/board/hymod/env.c deleted file mode 100644 index 66c5115b21..0000000000 --- a/board/hymod/env.c +++ /dev/null @@ -1,221 +0,0 @@ -/* - * (C) Copyright 2003 - * Murray Jensen, CSIRO-MIT, <Murray.Jensen@csiro.au> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <linux/ctype.h> - -DECLARE_GLOBAL_DATA_PTR; - -/* imports from fetch.c */ -extern int fetch_and_parse (char *, ulong, int (*)(uchar *, uchar *)); - -/* this is relative to the root of the server's tftp directory */ -static char *def_global_env_path = "/hymod/global_env"; - -static int -env_callback (uchar *name, uchar *value) -{ - hymod_conf_t *cp = &gd->bd->bi_hymod_conf; - char ov[CONFIG_SYS_CBSIZE], nv[CONFIG_SYS_CBSIZE], *p, *q, *nn, c, *curver, *newver; - int override = 1, append = 0, remove = 0, nnl, ovl, nvl; - - nn = (char *)name; - - if (*nn == '-') { - override = 0; - nn++; - } - - while (isblank(*nn)) - nn++; - - if ((nnl = strlen (nn)) == 0) { - printf ("Empty name in global env file\n"); - return (0); - } - - if ((c = nn[nnl - 1]) == '+' || c == '-') { - if (c == '+') - append = 1; - else - remove = 1; - nn[--nnl] = '\0'; - } - - while (nnl > 0 && isblank(nn[nnl - 1])) - nn[--nnl] = '\0'; - if (nnl == 0) { - printf ("Empty name in global env file\n"); - return (0); - } - - p = (char *)value; - q = nv; - - while (isblank(*p)) - p++; - - nvl = strlen (p); - while (nvl > 0 && isblank(p[nvl - 1])) - p[--nvl] = '\0'; - - while ((*q = *p++) != '\0') { - if (*q == '%') { - switch (*p++) { - - case '\0': /* whoops - back up */ - p--; - break; - - case '%': /* a single percent character */ - q++; - break; - - case 's': /* main board serial number as string */ - q += sprintf (q, "%010lu", - cp->main.eeprom.serno); - break; - - case 'S': /* main board serial number as number */ - q += sprintf (q, "%lu", cp->main.eeprom.serno); - break; - - default: /* ignore any others */ - break; - } - } - else - q++; - } - - if ((nvl = q - nv) == 0) { - setenv (nn, NULL); - return (1); - } - - if ((curver = getenv ("global_env_version")) == NULL) - curver = "unknown"; - - if ((newver = getenv ("new_genv_version")) == NULL || \ - strcmp (curver, newver) == 0) { - if (strcmp (nn, "version") == 0) - setenv ("new_genv_version", nv); - return (1); - } - - if ((p = getenv (nn)) != NULL) { - - strcpy (ov, p); - ovl = strlen (ov); - - if (append) { - - if (strstr (ov, nv) == NULL) { - - printf ("Appending '%s' to env var '%s'\n", - nv, nn); - - while (nvl >= 0) { - nv[ovl + 1 + nvl] = nv[nvl]; - nvl--; - } - - nv[ovl] = ' '; - - while (--ovl >= 0) - nv[ovl] = ov[ovl]; - - setenv (nn, nv); - } - - return (1); - } - - if (remove) { - - if (strstr (ov, nv) != NULL) { - - printf ("Removing '%s' from env var '%s'\n", - nv, nn); - - while ((p = strstr (ov, nv)) != NULL) { - q = p + nvl; - if (*q == ' ') - q++; - strcpy(p, q); - } - - setenv (nn, ov); - } - - return (1); - } - - if (!override || strcmp (ov, nv) == 0) - return (1); - - printf ("Re-setting env cmd '%s' from '%s' to '%s'\n", - nn, ov, nv); - } - else - printf ("Setting env cmd '%s' to '%s'\n", nn, nv); - - setenv (nn, nv); - return (1); -} - -void -hymod_check_env (void) -{ - char *p, *path, *curver, *newver; - int firsttime = 0, needsave = 0; - - if (getenv ("global_env_loaded") == NULL) { - puts ("*** global environment has never been loaded\n"); - puts ("*** fetching from server"); - firsttime = 1; - } - else if ((p = getenv ("always_check_env")) != NULL && - strcmp (p, "yes") == 0) - puts ("*** checking for updated global environment"); - else - return; - - puts (" (Control-C to Abort)\n"); - - if ((path = getenv ("global_env_path")) == NULL || *path == '\0') - path = def_global_env_path; - - if (fetch_and_parse (path, CONFIG_SYS_LOAD_ADDR, env_callback) == 0) { - puts ("*** Fetch of global environment failed!\n"); - return; - } - - if ((newver = getenv ("new_genv_version")) == NULL) { - puts ("*** Version number not set - contents ignored!\n"); - return; - } - - if ((curver = getenv ("global_env_version")) == NULL || \ - strcmp (curver, newver) != 0) { - setenv ("global_env_version", newver); - needsave = 1; - } - else - printf ("*** Global environment up-to-date (ver %s)\n", curver); - - setenv ("new_genv_version", NULL); - - if (firsttime) { - setenv ("global_env_loaded", "yes"); - needsave = 1; - } - - if (needsave) - puts ("\n*** Remember to run the 'saveenv' " - "command to save the changes\n\n"); -} diff --git a/board/hymod/fetch.c b/board/hymod/fetch.c deleted file mode 100644 index da9373ffb0..0000000000 --- a/board/hymod/fetch.c +++ /dev/null @@ -1,91 +0,0 @@ -/* - * (C) Copyright 2001 - * Murray Jensen, CSIRO-MIT, <Murray.Jensen@csiro.au> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <net.h> - -/* imports from input.c */ -extern int hymod_get_ethaddr (void); - -int -fetch_and_parse (char *fn, ulong addr, int (*cback)(uchar *, uchar *)) -{ - char *ethaddr; - uchar *fp, *efp; - int rc, count = 0; - - while ((ethaddr = getenv ("ethaddr")) == NULL || *ethaddr == '\0') { - - printf ("*** Ethernet address is%s not set\n", - count == 0 ? "" : " STILL"); - - if ((rc = hymod_get_ethaddr ()) < 0) { - if (rc == -1) - puts ("\n*** interrupted!"); - else - puts ("\n*** timeout!"); - printf (" - fetch of '%s' aborted\n", fn); - return (0); - } - - count++; - } - - copy_filename (BootFile, fn, sizeof (BootFile)); - load_addr = addr; - NetBootFileXferSize = 0; - - if (NetLoop(TFTPGET) == 0) { - printf ("tftp transfer of file '%s' failed\n", fn); - return (0); - } - - if (NetBootFileXferSize == 0) { - printf ("can't determine size of file '%s'\n", fn); - return (0); - } - - fp = (uchar *)load_addr; - efp = fp + NetBootFileXferSize; - - do { - uchar *name, *value; - - if (*fp == '#' || *fp == '\n') { - /* skip this line */ - while (fp < efp && *fp++ != '\n') - ; - continue; - } - - name = fp; - - while (fp < efp && *fp != '=' && *fp != '\n') - fp++; - if (fp >= efp) - break; - if (*fp == '\n') { - fp++; - continue; - } - *fp++ = '\0'; - - value = fp; - - while (fp < efp && *fp != '\n') - fp++; - if (fp[-1] == '\r') - fp[-1] = '\0'; - *fp++ = '\0'; /* ok if we go off the end here */ - - if ((*cback)(name, value) == 0) - return (0); - - } while (fp < efp); - - return (1); -} diff --git a/board/hymod/flash.c b/board/hymod/flash.c deleted file mode 100644 index 02e519c695..0000000000 --- a/board/hymod/flash.c +++ /dev/null @@ -1,490 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - * - * Hacked for the Hymod board by Murray.Jensen@csiro.au, 20-Oct-00 - */ - -#include <common.h> -#include <mpc8260.h> -#include <board/hymod/flash.h> - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -/*----------------------------------------------------------------------- - * Protection Flags: - */ -#define FLAG_PROTECT_SET 0x01 -#define FLAG_PROTECT_CLEAR 0x02 - -/*----------------------------------------------------------------------- - */ - -/* - * probe for flash bank at address "base" and store info about it - * in the flash_info entry "fip". Fatal error if nothing there. - */ -static void -bank_probe (flash_info_t *fip, volatile bank_addr_t base) -{ - volatile bank_addr_t addr; - bank_word_t word; - int i; - - /* reset the flash */ - *base = BANK_CMD_RST; - - /* put flash into read id mode */ - *base = BANK_CMD_RD_ID; - - /* check the manufacturer id - must be intel */ - word = *BANK_REG_MAN_CODE (base); - if (word != BANK_FILL_WORD (INTEL_MANUFACT&0xff)) - panic ("\nbad manufacturer's code (0x%08lx) at addr 0x%08lx", - (unsigned long)word, (unsigned long)base); - - /* check the device id */ - word = *BANK_REG_DEV_CODE (base); - switch (word) { - - case BANK_FILL_WORD (INTEL_ID_28F320J5&0xff): - fip->flash_id = FLASH_MAN_INTEL | FLASH_28F320J5; - fip->sector_count = 32; - break; - - case BANK_FILL_WORD (INTEL_ID_28F640J5&0xff): - fip->flash_id = FLASH_MAN_INTEL | FLASH_28F640J5; - fip->sector_count = 64; - break; - - case BANK_FILL_WORD (INTEL_ID_28F320J3A&0xff): - fip->flash_id = FLASH_MAN_INTEL | FLASH_28F320J3A; - fip->sector_count = 32; - break; - - case BANK_FILL_WORD (INTEL_ID_28F640J3A&0xff): - fip->flash_id = FLASH_MAN_INTEL | FLASH_28F640J3A; - fip->sector_count = 64; - break; - - case BANK_FILL_WORD (INTEL_ID_28F128J3A&0xff): - fip->flash_id = FLASH_MAN_INTEL | FLASH_28F128J3A; - fip->sector_count = 128; - break; - - default: - panic ("\nbad device code (0x%08lx) at addr 0x%08lx", - (unsigned long)word, (unsigned long)base); - } - - if (fip->sector_count >= CONFIG_SYS_MAX_FLASH_SECT) - panic ("\ntoo many sectors (%d) in flash at address 0x%08lx", - fip->sector_count, (unsigned long)base); - - addr = base; - for (i = 0; i < fip->sector_count; i++) { - fip->start[i] = (unsigned long)addr; - fip->protect[i] = 0; - addr = BANK_ADDR_NEXT_BLK (addr); - } - - fip->size = (bank_size_t)addr - (bank_size_t)base; - - /* reset the flash */ - *base = BANK_CMD_RST; -} - -static void -bank_reset (flash_info_t *info, int sect) -{ - volatile bank_addr_t addr = (bank_addr_t)info->start[sect]; - -#ifdef FLASH_DEBUG - printf ("writing reset cmd to addr 0x%08lx\n", (unsigned long)addr); -#endif - - *addr = BANK_CMD_RST; -} - -static void -bank_erase_init (flash_info_t *info, int sect) -{ - volatile bank_addr_t addr = (bank_addr_t)info->start[sect]; - int flag; - -#ifdef FLASH_DEBUG - printf ("erasing sector %d, addr = 0x%08lx\n", - sect, (unsigned long)addr); -#endif - - /* Disable intrs which might cause a timeout here */ - flag = disable_interrupts (); - -#ifdef FLASH_DEBUG - printf ("writing erase cmd to addr 0x%08lx\n", (unsigned long)addr); -#endif - *addr = BANK_CMD_ERASE1; - *addr = BANK_CMD_ERASE2; - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts (); -} - -static int -bank_erase_poll (flash_info_t *info, int sect) -{ - volatile bank_addr_t addr = (bank_addr_t)info->start[sect]; - bank_word_t stat = *addr; - -#ifdef FLASH_DEBUG - printf ("checking status at addr 0x%08lx [0x%08lx]\n", - (unsigned long)addr, (unsigned long)stat); -#endif - - if ((stat & BANK_STAT_RDY) == BANK_STAT_RDY) { - if ((stat & BANK_STAT_ERR) != 0) { - printf ("failed on sector %d [0x%08lx] at " - "address 0x%08lx\n", sect, - (unsigned long)stat, (unsigned long)addr); - *addr = BANK_CMD_CLR_STAT; - return (-1); - } - else - return (1); - } - else - return (0); -} - -static int -bank_write_word (volatile bank_addr_t addr, bank_word_t value) -{ - bank_word_t stat; - ulong start; - int flag, retval; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts (); - - *addr = BANK_CMD_PROG; - - *addr = value; - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts (); - - retval = 0; - - /* data polling for D7 */ - start = get_timer (0); - do { - if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - retval = 1; - goto done; - } - stat = *addr; - } while ((stat & BANK_STAT_RDY) != BANK_STAT_RDY); - - if ((stat & BANK_STAT_ERR) != 0) { - printf ("flash program failed [0x%08lx] at address 0x%08lx\n", - (unsigned long)stat, (unsigned long)addr); - *addr = BANK_CMD_CLR_STAT; - retval = 3; - } - -done: - /* reset to read mode */ - *addr = BANK_CMD_RST; - - return (retval); -} - -/*----------------------------------------------------------------------- - */ - -unsigned long -flash_init (void) -{ - int i; - - /* Init: no FLASHes known */ - for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) { - flash_info[i].flash_id = FLASH_UNKNOWN; - } - - bank_probe (&flash_info[0], (bank_addr_t)CONFIG_SYS_FLASH_BASE); - - /* - * protect monitor and environment sectors - */ - -#if CONFIG_SYS_MONITOR_BASE == CONFIG_SYS_FLASH_BASE - (void)flash_protect (FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1, - &flash_info[0]); -#endif - -#if defined(CONFIG_SYS_FLASH_ENV_ADDR) - (void)flash_protect (FLAG_PROTECT_SET, - CONFIG_SYS_FLASH_ENV_ADDR, -#if defined(CONFIG_SYS_FLASH_ENV_BUF) - CONFIG_SYS_FLASH_ENV_ADDR + CONFIG_SYS_FLASH_ENV_BUF - 1, -#else - CONFIG_SYS_FLASH_ENV_ADDR + CONFIG_SYS_FLASH_ENV_SIZE - 1, -#endif - &flash_info[0]); -#endif - - return flash_info[0].size; -} - -/*----------------------------------------------------------------------- - */ -void -flash_print_info (flash_info_t *info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_INTEL: printf ("INTEL "); break; - default: printf ("Unknown Vendor "); break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_28F320J5: printf ("28F320J5 (32 Mbit, 2 x 16bit)\n"); - break; - case FLASH_28F640J5: printf ("28F640J5 (64 Mbit, 2 x 16bit)\n"); - break; - case FLASH_28F320J3A: printf ("28F320J3A (32 Mbit, 2 x 16bit)\n"); - break; - case FLASH_28F640J3A: printf ("28F640J3A (64 Mbit, 2 x 16bit)\n"); - break; - case FLASH_28F128J3A: printf ("28F320J3A (128 Mbit, 2 x 16bit)\n"); - break; - default: printf ("Unknown Chip Type\n"); - break; - } - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i=0; i<info->sector_count; ++i) { - if ((i % 5) == 0) - printf ("\n "); - printf (" %08lX%s", - info->start[i], - info->protect[i] ? " (RO)" : " " - ); - } - printf ("\n"); - return; -} - -/* - * The following code cannot be run from FLASH! - */ - -/*----------------------------------------------------------------------- - */ - -int -flash_erase (flash_info_t *info, int s_first, int s_last) -{ - int prot, sect, haderr; - ulong start, now, last; - int rcode = 0; - -#ifdef FLASH_DEBUG - printf ("\nflash_erase: erase %d sectors (%d to %d incl.) from\n" - " Bank # %d: ", s_last - s_first + 1, s_first, s_last, - (info - flash_info) + 1); - flash_print_info (info); -#endif - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; - } - - prot = 0; - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf ("- Warning: %d protected sector%s will not be erased\n", - prot, (prot > 1 ? "s" : "")); - } - - start = get_timer (0); - last = 0; - haderr = 0; - - for (sect = s_first; sect <= s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - ulong estart; - int sectdone; - - bank_erase_init (info, sect); - - /* wait at least 80us - let's wait 1 ms */ - udelay (1000); - - estart = get_timer (start); - - do { - now = get_timer (start); - - if (now - estart > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout (sect %d)\n", sect); - haderr = 1; - rcode = 1; - break; - } - -#ifndef FLASH_DEBUG - /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ - putc ('.'); - last = now; - } -#endif - - sectdone = bank_erase_poll (info, sect); - - if (sectdone < 0) { - haderr = 1; - rcode = 1; - break; - } - - } while (!sectdone); - - if (haderr) - break; - } - } - - if (haderr > 0) - printf (" failed\n"); - else - printf (" done\n"); - - /* reset to read mode */ - for (sect = s_first; sect <= s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - bank_reset (info, sect); - } - } - return rcode; -} - -/*----------------------------------------------------------------------- - * Write a word to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - * 3 - Program failed - */ -static int -write_word (flash_info_t *info, ulong dest, ulong data) -{ - /* Check if Flash is (sufficiently) erased */ - if ((*(ulong *)dest & data) != data) - return (2); - - return (bank_write_word ((bank_addr_t)dest, (bank_word_t)data)); -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - * 3 - Program failed - */ - -int -write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) -{ - ulong cp, wp, data; - int i, l, rc; - - wp = (addr & ~3); /* get lower word aligned address */ - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i=0, cp=wp; i<l; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - for (; i<4 && cnt>0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - for (; cnt==0 && i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - if ((rc = write_word (info, wp, data)) != 0) { - return (rc); - } - wp += 4; - } - - /* - * handle word aligned part - */ - while (cnt >= 4) { - data = 0; - for (i=0; i<4; ++i) { - data = (data << 8) | *src++; - } - if ((rc = write_word (info, wp, data)) != 0) { - return (rc); - } - wp += 4; - cnt -= 4; - } - - if (cnt == 0) { - return (0); - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) { - data = (data << 8) | *src++; - --cnt; - } - for (; i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - return (write_word (info, wp, data)); -} - -/*----------------------------------------------------------------------- - */ diff --git a/board/hymod/flash.h b/board/hymod/flash.h deleted file mode 100644 index 6ea282341f..0000000000 --- a/board/hymod/flash.h +++ /dev/null @@ -1,140 +0,0 @@ -/* - * (C) Copyright 2000 - * Murray Jensen, CSIRO-MIT, <Murray.Jensen@csiro.au> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/*************** DEFINES for Intel StrataFlash FLASH chip ********************/ - -/* Commands */ -#define ISF_CMD_RST 0xFF /* reset flash */ -#define ISF_CMD_RD_ID 0x90 /* read the id and lock bits */ -#define ISF_CMD_RD_QUERY 0x98 /* read device capabilities */ -#define ISF_CMD_RD_STAT 0x70 /* read the status register */ -#define ISF_CMD_CLR_STAT 0x50 /* clear the staus register */ -#define ISF_CMD_WR_BUF 0xE8 /* clear the staus register */ -#define ISF_CMD_PROG 0x40 /* program word command */ -#define ISF_CMD_ERASE1 0x20 /* 1st word for block erase */ -#define ISF_CMD_ERASE2 0xD0 /* 2nd word for block erase */ -#define ISF_CMD_ERASE_SUSP 0xB0 /* suspend block erase */ -#define ISF_CMD_LOCK 0x60 /* 1st word for all lock cmds */ -#define ISF_CMD_SET_LOCK_BLK 0x01 /* 2nd wrd set block lock bit */ -#define ISF_CMD_SET_LOCK_MSTR 0xF1 /* 2nd wrd set master lck bit */ -#define ISF_CMD_CLR_LOCK_BLK 0xD0 /* 2nd wrd clear blk lck bit */ - -/* status register bits */ -#define ISF_STAT_DPS 0x02 /* Device Protect Status */ -#define ISF_STAT_VPPS 0x08 /* VPP Status */ -#define ISF_STAT_PSLBS 0x10 /* Program+Set Lock Bit Stat */ -#define ISF_STAT_ECLBS 0x20 /* Erase+Clr Lock Bit Stat */ -#define ISF_STAT_ESS 0x40 /* Erase Suspend Status */ -#define ISF_STAT_RDY 0x80 /* WSM Mach Status, 1=rdy */ - -#define ISF_STAT_ERR (ISF_STAT_VPPS | ISF_STAT_DPS | \ - ISF_STAT_ECLBS | ISF_STAT_PSLBS) - -/* register addresses, valid only following an ISF_CMD_RD_ID command */ -#define ISF_REG_MAN_CODE 0x00 /* manufacturer code */ -#define ISF_REG_DEV_CODE 0x01 /* device code */ -#define ISF_REG_BLK_LCK 0x02 /* block lock configuration */ -#define ISF_REG_MST_LCK 0x03 /* master lock configuration */ - -/********************** DEFINES for Hymod Flash ******************************/ - -/* - * this code requires that the flash on any Hymod board appear as a bank - * of two (identical) 16bit Intel StrataFlash chips with 64Kword erase - * sectors (or blocks), running in x16 bit mode and connected side-by-side - * to make a 32-bit wide bus. - */ - -typedef unsigned long bank_word_t; -typedef bank_word_t bank_blk_t[64 * 1024]; - -#define BANK_FILL_WORD(b) (((bank_word_t)(b) << 16) | (bank_word_t)(b)) - -#ifdef EXAMPLE - -/* theoretically the following examples should also work */ - -/* one flash chip in x8 mode with 128Kword sectors and 8bit bus */ -typedef unsigned char bank_word_t; -typedef bank_word_t bank_blk_t[128 * 1024]; -#define BANK_FILL_WORD(b) ((bank_word_t)(b)) - -/* four flash chips in x16 mode with 32Kword sectors and 64bit bus */ -typedef unsigned long long bank_word_t; -typedef bank_word_t bank_blk_t[32 * 1024]; -#define BANK_FILL_WORD(b) ( \ - ((bank_word_t)(b) << 48) \ - ((bank_word_t)(b) << 32) \ - ((bank_word_t)(b) << 16) \ - ((bank_word_t)(b) << 0) \ - ) - -#endif /* EXAMPLE */ - -/* the sizes of these two types should probably be the same */ -typedef bank_word_t *bank_addr_t; -typedef unsigned long bank_size_t; - -/* align bank addresses and sizes to bank word boundaries */ -#define BANK_ADDR_WORD_ALIGN(a) ((bank_addr_t)((bank_size_t)(a) \ - & ~(sizeof (bank_word_t) - 1))) -#define BANK_SIZE_WORD_ALIGN(s) (((bank_size_t)(s) + sizeof (bank_word_t) - 1) \ - & ~(sizeof (bank_word_t) - 1)) - -/* align bank addresses and sizes to bank block boundaries */ -#define BANK_ADDR_BLK_ALIGN(a) ((bank_addr_t)((bank_size_t)(a) \ - & ~(sizeof (bank_blk_t) - 1))) -#define BANK_SIZE_BLK_ALIGN(s) (((bank_size_t)(s) + sizeof (bank_blk_t) - 1) \ - & ~(sizeof (bank_blk_t) - 1)) - -/* add an offset to a bank address */ -#define BANK_ADDR_OFFSET(a, o) ((bank_addr_t)((bank_size_t)(a) + \ - (bank_size_t)(o))) - -/* adjust a bank address to start of next word, block or bank */ -#define BANK_ADDR_NEXT_WORD(a) BANK_ADDR_OFFSET(BANK_ADDR_WORD_ALIGN(a), \ - sizeof (bank_word_t)) -#define BANK_ADDR_NEXT_BLK(a) BANK_ADDR_OFFSET(BANK_ADDR_BLK_ALIGN(a), \ - sizeof (bank_blk_t)) - -/* get bank address of register r given a bank base address a and block num b */ -#define BANK_ADDR_REG(a, b, r) BANK_ADDR_OFFSET(BANK_ADDR_OFFSET((a), \ - (bank_size_t)(b) * sizeof (bank_blk_t)), \ - (bank_size_t)(r) * sizeof (bank_word_t)) - -/* make a bank word value for each StrataFlash value */ - -/* Commands */ -#define BANK_CMD_RST BANK_FILL_WORD(ISF_CMD_RST) -#define BANK_CMD_RD_ID BANK_FILL_WORD(ISF_CMD_RD_ID) -#define BANK_CMD_RD_STAT BANK_FILL_WORD(ISF_CMD_RD_STAT) -#define BANK_CMD_CLR_STAT BANK_FILL_WORD(ISF_CMD_CLR_STAT) -#define BANK_CMD_ERASE1 BANK_FILL_WORD(ISF_CMD_ERASE1) -#define BANK_CMD_ERASE2 BANK_FILL_WORD(ISF_CMD_ERASE2) -#define BANK_CMD_PROG BANK_FILL_WORD(ISF_CMD_PROG) -#define BANK_CMD_LOCK BANK_FILL_WORD(ISF_CMD_LOCK) -#define BANK_CMD_SET_LOCK_BLK BANK_FILL_WORD(ISF_CMD_SET_LOCK_BLK) -#define BANK_CMD_SET_LOCK_MSTR BANK_FILL_WORD(ISF_CMD_SET_LOCK_MSTR) -#define BANK_CMD_CLR_LOCK_BLK BANK_FILL_WORD(ISF_CMD_CLR_LOCK_BLK) - -/* status register bits */ -#define BANK_STAT_DPS BANK_FILL_WORD(ISF_STAT_DPS) -#define BANK_STAT_PSS BANK_FILL_WORD(ISF_STAT_PSS) -#define BANK_STAT_VPPS BANK_FILL_WORD(ISF_STAT_VPPS) -#define BANK_STAT_PSLBS BANK_FILL_WORD(ISF_STAT_PSLBS) -#define BANK_STAT_ECLBS BANK_FILL_WORD(ISF_STAT_ECLBS) -#define BANK_STAT_ESS BANK_FILL_WORD(ISF_STAT_ESS) -#define BANK_STAT_RDY BANK_FILL_WORD(ISF_STAT_RDY) - -#define BANK_STAT_ERR BANK_FILL_WORD(ISF_STAT_ERR) - -/* make a bank register address for each StrataFlash register address */ - -#define BANK_REG_MAN_CODE(a) BANK_ADDR_REG((a), 0, ISF_REG_MAN_CODE) -#define BANK_REG_DEV_CODE(a) BANK_ADDR_REG((a), 0, ISF_REG_DEV_CODE) -#define BANK_REG_BLK_LCK(a, b) BANK_ADDR_REG((a), (b), ISF_REG_BLK_LCK) -#define BANK_REG_MST_LCK(a) BANK_ADDR_REG((a), 0, ISF_REG_MST_LCK) diff --git a/board/hymod/global_env b/board/hymod/global_env deleted file mode 100644 index ac12fd7f18..0000000000 --- a/board/hymod/global_env +++ /dev/null @@ -1,145 +0,0 @@ -# DONT FORGET TO CHANGE THE "version" VAR BELOW IF YOU MAKE CHANGES TO THIS FILE - -# (C) Copyright 2001 -# Murray Jensen, CSIRO-MIT, <Murray.Jensen@csiro.au> -# -# SPDX-License-Identifier: GPL-2.0+ - -# -# global_env -# -# file used by Hymod boards to initialise the u-boot non-volatile -# environment when u-boot is first run (it determines this by the -# absence of the environment variable "global_env_loaded") -# -# format of this file is: -# -# 1. blank lines and lines beginning with '#' are ignored -# 2. all other lines must have the form <name>=<value> -# 3. if a percent appears anywhere, it is replaced like so: -# -# %s serial number of the main board (10 digit zero filled) -# %S serial number of the main board (plain number) -# %% a percentage character -# ... otherwise the %x is discarded -# -# if first character in <name> is a dash ('-'), then an existing env var -# will not be overwritten (the dash is removed). i.e. it is only set if -# it does not exist -# -# if last character in <name> is a plus ('+'), then <value> will be appended -# to any existing env var (the plus is ignored). Duplicates of <value> are -# removed. -# -# similarly, if the last character in <name> is a minus ('-'), then any -# occurences of <value> in the current value of <name> will removed (the -# minus is ignored). -# -# leading and trailing whitespace is removed in both <name> and <value> -# (after processing any initial or final plus/minus in <name>). -# - -# MISCELLANEOUS PARAMETERS - -# version must always come first -version=4 - -# set the ip address based on the main board serial number -ipaddr=192.168.1.%S -serverip=192.168.1.254 - -# stop auto execute after tftp (not a very good name really) -autostart=no - -# setting this to "yes" forces the global_env file to be loaded and processed -# if the current version is different to the version in the file -always_check_env=no - -# BOOTING COMMANDS AND PARAMETERS - -# command to run when "auto-booting" -bootcmd=bootm 40080000 - -# how long the "countdown" to automatically running "bootcmd" is -bootdelay=2 - -# how long before it "times out" console input and attempts to run "bootcmd" -bootretry=5 - -# arguments passed to the boot program (i.e. linux kernel) via register 6 -# the linux kernel (v2.4) uses the following registers: -# r3 - address of board information structure -# r4 - address of initial ramdisk image (0 means no initrd) -# r5 - size of initial ramdisk image -# r6 - address of command line string --bootargs=root=/dev/mtdblock5 rootfstype=squashfs ro - -# these four are for hymod linux integrated into our Sun network -bootargs+=serialno=%S -bootargs+=nisclient nisdomain=mlb.dmt.csiro.au nissrvadr=138.194.112.4 -bootargs+=nfsclient -bootargs+=automount - -# start a web server by default -bootargs+=webserver - -# give negotiation time to finish -bootargs+=netsleep=5 - -# then our ciscos don't pass packets for 25-30 secs after that, so -# pinging the server until it responds prevents network connections -# from failing... -bootargs+=netping - -# these are old bootargs - we don't need them anymore -bootargs-=preload=unix,i2c-cpm,i2c-dev -bootargs-=ramdisk_size=32768 -bootargs-=ramdisk_size=24576 - -# FLASH MANIPULATION COMMANDS - -# -# 16M flash, 64 x 256K sectors, mapped at address 0x40000000 -# -# Sector(s) Address Size Description -# -# 0 - 0 0x40000000 256K boot code -# 1 - 1 0x40040000 256K non volatile environment -# 2 - 4 0x40080000 768K linux kernel image -# 5 - 7 0x40140000 768K alternate linux kernel image -# 8 - 47 0x40200000 10M linux initial ramdisk image -# 48 - 63 0x40c00000 4M ramdisk image for applications -# - -fetchboot=tftp 100000 /hymod/u-boot.bin -eraseboot=protect off 1:0 ; erase 1:0 ; protect on 1:0 -copyboot=protect off 1:0 ; cp.b 100000 40000000 40000 ; protect on 1:0 -cmpboot=cmp.b 100000 40000000 40000 -newboot=run fetchboot eraseboot copyboot cmpboot - -fetchlinux=tftp 100000 /hymod/linux.bin -eraselinux=erase 1:2-4 -copylinux=cp.b 100000 40080000 ${filesize} -cmplinux=cmp.b 100000 40080000 ${filesize} -newlinux=run fetchlinux eraselinux copylinux cmplinux - -fetchaltlinux=tftp 100000 /hymod/altlinux.bin -erasealtlinux=erase 1:5-7 -copyaltlinux=cp.b 100000 40140000 ${filesize} -cmpaltlinux=cmp.b 100000 40140000 ${filesize} -newaltlinux=run fetchaltlinux erasealtlinux copyaltlinux cmpaltlinux - -fetchroot=tftp 100000 /hymod/root.bin -eraseroot=erase 1:8-47 -copyroot=cp.b 100000 40200000 ${filesize} -cmproot=cmp.b 100000 40200000 ${filesize} -newroot=run fetchroot eraseroot copyroot cmproot - -fetchard=tftp 100000 /hymod/apprd.bin -eraseard=erase 1:48-63 -copyard=cp.b 100000 40c00000 ${filesize} -cmpard=cmp.b 100000 40c00000 ${filesize} -newapprd=run fetchard eraseard copyard cmpard - -# pass above map to linux mtd driver -bootargs+=mtdparts=phys:256k(u-boot),256k(u-boot-env),768k(linux),768k(altlinux),10m(root),4m(hymod) diff --git a/board/hymod/hymod.c b/board/hymod/hymod.c deleted file mode 100644 index 0183f781de..0000000000 --- a/board/hymod/hymod.c +++ /dev/null @@ -1,521 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - * - * Hacked for the Hymod board by Murray.Jensen@csiro.au, 20-Oct-00 - */ - -#include <common.h> -#include <bootretry.h> -#include <cli.h> -#include <mpc8260.h> -#include <mpc8260_irq.h> -#include <ioports.h> -#include <i2c.h> -#include <asm/iopin_8260.h> - -DECLARE_GLOBAL_DATA_PTR; - -/* ------------------------------------------------------------------------- */ - -/* imports from eeprom.c */ -extern int hymod_eeprom_read (int, hymod_eeprom_t *); -extern void hymod_eeprom_print (hymod_eeprom_t *); - -/* imports from env.c */ -extern void hymod_check_env (void); - -/* ------------------------------------------------------------------------- */ - -/* - * I/O Port configuration table - * - * if conf is 1, then that port pin will be configured at boot time - * according to the five values podr/pdir/ppar/psor/pdat for that entry - */ - -const iop_conf_t iop_conf_tab[4][32] = { - - /* Port A configuration */ - { - /* cnf par sor dir odr dat */ - { 1, 1, 1, 0, 0, 0 }, /* PA31: FCC1 MII COL */ - { 1, 1, 1, 0, 0, 0 }, /* PA30: FCC1 MII CRS */ - { 1, 1, 1, 1, 0, 0 }, /* PA29: FCC1 MII TX_ER */ - { 1, 1, 1, 1, 0, 0 }, /* PA28: FCC1 MII TX_EN */ - { 1, 1, 1, 0, 0, 0 }, /* PA27: FCC1 MII RX_DV */ - { 1, 1, 1, 0, 0, 0 }, /* PA26: FCC1 MII RX_ER */ - { 1, 0, 0, 1, 0, 0 }, /* PA25: FCC2 MII MDIO */ - { 1, 0, 0, 1, 0, 0 }, /* PA24: FCC2 MII MDC */ - { 1, 0, 0, 1, 0, 0 }, /* PA23: FCC3 MII MDIO */ - { 1, 0, 0, 1, 0, 0 }, /* PA22: FCC3 MII MDC */ - { 1, 1, 0, 1, 0, 0 }, /* PA21: FCC1 MII TxD[3] */ - { 1, 1, 0, 1, 0, 0 }, /* PA20: FCC1 MII TxD[2] */ - { 1, 1, 0, 1, 0, 0 }, /* PA19: FCC1 MII TxD[1] */ - { 1, 1, 0, 1, 0, 0 }, /* PA18: FCC1 MII TxD[0] */ - { 1, 1, 0, 0, 0, 0 }, /* PA17: FCC1 MII RxD[3] */ - { 1, 1, 0, 0, 0, 0 }, /* PA16: FCC1 MII RxD[2] */ - { 1, 1, 0, 0, 0, 0 }, /* PA15: FCC1 MII RxD[1] */ - { 1, 1, 0, 0, 0, 0 }, /* PA14: FCC1 MII RxD[0] */ - { 1, 0, 0, 1, 0, 0 }, /* PA13: FCC1 MII MDIO */ - { 1, 0, 0, 1, 0, 0 }, /* PA12: FCC1 MII MDC */ - { 1, 0, 0, 1, 0, 0 }, /* PA11: SEL_CD */ - { 1, 0, 0, 0, 0, 0 }, /* PA10: FLASH STS1 */ - { 1, 0, 0, 0, 0, 0 }, /* PA09: FLASH STS0 */ - { 1, 0, 0, 0, 0, 0 }, /* PA08: FLASH ~PE */ - { 1, 0, 0, 0, 0, 0 }, /* PA07: WATCH ~HRESET */ - { 1, 0, 0, 0, 1, 0 }, /* PA06: VC DONE */ - { 1, 0, 0, 1, 1, 0 }, /* PA05: VC INIT */ - { 1, 0, 0, 1, 0, 0 }, /* PA04: VC ~PROG */ - { 1, 0, 0, 1, 0, 0 }, /* PA03: VM ENABLE */ - { 1, 0, 0, 0, 1, 0 }, /* PA02: VM DONE */ - { 1, 0, 0, 1, 1, 0 }, /* PA01: VM INIT */ - { 1, 0, 0, 1, 0, 0 } /* PA00: VM ~PROG */ - }, - - /* Port B configuration */ - { - /* cnf par sor dir odr dat */ - { 1, 1, 0, 1, 0, 0 }, /* PB31: FCC2 MII TX_ER */ - { 1, 1, 0, 0, 0, 0 }, /* PB30: FCC2 MII RX_DV */ - { 1, 1, 1, 1, 0, 0 }, /* PB29: FCC2 MII TX_EN */ - { 1, 1, 0, 0, 0, 0 }, /* PB28: FCC2 MII RX_ER */ - { 1, 1, 0, 0, 0, 0 }, /* PB27: FCC2 MII COL */ - { 1, 1, 0, 0, 0, 0 }, /* PB26: FCC2 MII CRS */ - { 1, 1, 0, 1, 0, 0 }, /* PB25: FCC2 MII TxD[3] */ - { 1, 1, 0, 1, 0, 0 }, /* PB24: FCC2 MII TxD[2] */ - { 1, 1, 0, 1, 0, 0 }, /* PB23: FCC2 MII TxD[1] */ - { 1, 1, 0, 1, 0, 0 }, /* PB22: FCC2 MII TxD[0] */ - { 1, 1, 0, 0, 0, 0 }, /* PB21: FCC2 MII RxD[0] */ - { 1, 1, 0, 0, 0, 0 }, /* PB20: FCC2 MII RxD[1] */ - { 1, 1, 0, 0, 0, 0 }, /* PB19: FCC2 MII RxD[2] */ - { 1, 1, 0, 0, 0, 0 }, /* PB18: FCC2 MII RxD[3] */ - { 1, 1, 0, 0, 0, 0 }, /* PB17: FCC3 MII RX_DV */ - { 1, 1, 0, 0, 0, 0 }, /* PB16: FCC3 MII RX_ER */ - { 1, 1, 0, 1, 0, 0 }, /* PB15: FCC3 MII TX_ER */ - { 1, 1, 0, 1, 0, 0 }, /* PB14: FCC3 MII TX_EN */ - { 1, 1, 0, 0, 0, 0 }, /* PB13: FCC3 MII COL */ - { 1, 1, 0, 0, 0, 0 }, /* PB12: FCC3 MII CRS */ - { 1, 1, 0, 0, 0, 0 }, /* PB11: FCC3 MII RxD[3] */ - { 1, 1, 0, 0, 0, 0 }, /* PB10: FCC3 MII RxD[2] */ - { 1, 1, 0, 0, 0, 0 }, /* PB09: FCC3 MII RxD[1] */ - { 1, 1, 0, 0, 0, 0 }, /* PB08: FCC3 MII RxD[0] */ - { 1, 1, 0, 1, 0, 0 }, /* PB07: FCC3 MII TxD[3] */ - { 1, 1, 0, 1, 0, 0 }, /* PB06: FCC3 MII TxD[2] */ - { 1, 1, 0, 1, 0, 0 }, /* PB05: FCC3 MII TxD[1] */ - { 1, 1, 0, 1, 0, 0 }, /* PB04: FCC3 MII TxD[0] */ - { 0, 0, 0, 0, 0, 0 }, /* PB03: pin doesn't exist */ - { 0, 0, 0, 0, 0, 0 }, /* PB02: pin doesn't exist */ - { 0, 0, 0, 0, 0, 0 }, /* PB01: pin doesn't exist */ - { 0, 0, 0, 0, 0, 0 } /* PB00: pin doesn't exist */ - }, - - /* Port C configuration */ - { - /* cnf par sor dir odr dat */ - { 1, 0, 0, 0, 0, 0 }, /* PC31: MEZ ~IACK */ - { 0, 0, 0, 0, 0, 0 }, /* PC30: ? */ - { 1, 1, 0, 0, 0, 0 }, /* PC29: CLK SCCx */ - { 1, 1, 0, 0, 0, 0 }, /* PC28: CLK4 */ - { 1, 1, 0, 0, 0, 0 }, /* PC27: CLK SCCF */ - { 1, 1, 0, 0, 0, 0 }, /* PC26: CLK 32K */ - { 1, 1, 0, 0, 0, 0 }, /* PC25: BRG4/CLK7 */ - { 0, 0, 0, 0, 0, 0 }, /* PC24: ? */ - { 1, 1, 0, 0, 0, 0 }, /* PC23: CLK SCCx */ - { 1, 1, 0, 0, 0, 0 }, /* PC22: FCC1 MII RX_CLK */ - { 1, 1, 0, 0, 0, 0 }, /* PC21: FCC1 MII TX_CLK */ - { 1, 1, 0, 0, 0, 0 }, /* PC20: CLK SCCF */ - { 1, 1, 0, 0, 0, 0 }, /* PC19: FCC2 MII RX_CLK */ - { 1, 1, 0, 0, 0, 0 }, /* PC18: FCC2 MII TX_CLK */ - { 1, 1, 0, 0, 0, 0 }, /* PC17: FCC3 MII RX_CLK */ - { 1, 1, 0, 0, 0, 0 }, /* PC16: FCC3 MII TX_CLK */ - { 1, 0, 0, 0, 0, 0 }, /* PC15: SCC1 UART ~CTS */ - { 1, 0, 0, 0, 0, 0 }, /* PC14: SCC1 UART ~CD */ - { 1, 0, 0, 0, 0, 0 }, /* PC13: SCC2 UART ~CTS */ - { 1, 0, 0, 0, 0, 0 }, /* PC12: SCC2 UART ~CD */ - { 1, 0, 0, 1, 0, 0 }, /* PC11: SCC1 UART ~DTR */ - { 1, 0, 0, 1, 0, 0 }, /* PC10: SCC1 UART ~DSR */ - { 1, 0, 0, 1, 0, 0 }, /* PC09: SCC2 UART ~DTR */ - { 1, 0, 0, 1, 0, 0 }, /* PC08: SCC2 UART ~DSR */ - { 1, 0, 0, 0, 0, 0 }, /* PC07: TEMP ~ALERT */ - { 1, 0, 0, 0, 0, 0 }, /* PC06: FCC3 INT */ - { 1, 0, 0, 0, 0, 0 }, /* PC05: FCC2 INT */ - { 1, 0, 0, 0, 0, 0 }, /* PC04: FCC1 INT */ - { 0, 1, 1, 1, 0, 0 }, /* PC03: SDMA IDMA2 ~DACK */ - { 0, 1, 1, 0, 0, 0 }, /* PC02: SDMA IDMA2 ~DONE */ - { 0, 1, 0, 0, 0, 0 }, /* PC01: SDMA IDMA2 ~DREQ */ - { 1, 1, 0, 1, 0, 0 } /* PC00: BRG7 */ - }, - - /* Port D configuration */ - { - /* cnf par sor dir odr dat */ - { 1, 1, 0, 0, 0, 0 }, /* PD31: SCC1 UART RxD */ - { 1, 1, 1, 1, 0, 0 }, /* PD30: SCC1 UART TxD */ - { 1, 0, 0, 1, 0, 0 }, /* PD29: SCC1 UART ~RTS */ - { 1, 1, 0, 0, 0, 0 }, /* PD28: SCC2 UART RxD */ - { 1, 1, 0, 1, 0, 0 }, /* PD27: SCC2 UART TxD */ - { 1, 0, 0, 1, 0, 0 }, /* PD26: SCC2 UART ~RTS */ - { 1, 0, 0, 0, 0, 0 }, /* PD25: SCC1 UART ~RI */ - { 1, 0, 0, 0, 0, 0 }, /* PD24: SCC2 UART ~RI */ - { 1, 0, 0, 1, 0, 0 }, /* PD23: CLKGEN PD */ - { 1, 0, 0, 0, 0, 0 }, /* PD22: USER3 */ - { 1, 0, 0, 0, 0, 0 }, /* PD21: USER2 */ - { 1, 0, 0, 0, 0, 0 }, /* PD20: USER1 */ - { 1, 1, 1, 0, 0, 0 }, /* PD19: SPI ~SEL */ - { 1, 1, 1, 0, 0, 0 }, /* PD18: SPI CLK */ - { 1, 1, 1, 0, 0, 0 }, /* PD17: SPI MOSI */ - { 1, 1, 1, 0, 0, 0 }, /* PD16: SPI MISO */ - { 1, 1, 1, 0, 1, 0 }, /* PD15: I2C SDA */ - { 1, 1, 1, 0, 1, 0 }, /* PD14: I2C SCL */ - { 1, 0, 0, 1, 0, 1 }, /* PD13: TEMP ~STDBY */ - { 1, 0, 0, 1, 0, 1 }, /* PD12: FCC3 ~RESET */ - { 1, 0, 0, 1, 0, 1 }, /* PD11: FCC2 ~RESET */ - { 1, 0, 0, 1, 0, 1 }, /* PD10: FCC1 ~RESET */ - { 1, 0, 0, 0, 0, 0 }, /* PD09: PD9 */ - { 1, 0, 0, 0, 0, 0 }, /* PD08: PD8 */ - { 1, 0, 0, 1, 0, 1 }, /* PD07: PD7 */ - { 1, 0, 0, 1, 0, 1 }, /* PD06: PD6 */ - { 1, 0, 0, 1, 0, 1 }, /* PD05: PD5 */ - { 1, 0, 0, 1, 0, 1 }, /* PD04: PD4 */ - { 0, 0, 0, 0, 0, 0 }, /* PD03: pin doesn't exist */ - { 0, 0, 0, 0, 0, 0 }, /* PD02: pin doesn't exist */ - { 0, 0, 0, 0, 0, 0 }, /* PD01: pin doesn't exist */ - { 0, 0, 0, 0, 0, 0 } /* PD00: pin doesn't exist */ - } -}; - -/* ------------------------------------------------------------------------- */ - -/* - * AMI FS6377 Clock Generator configuration table - * - * the "fs6377_regs[]" table entries correspond to FS6377 registers - * 0 - 15 (total of 16 bytes). - * - * the data is written to the FS6377 via the i2c bus using address in - * "fs6377_addr" (address is 7 bits - R/W bit not included). - * - * The fs6377 has four clock outputs: A, B, C and D. - * - * Outputs C and D can each provide two different clock outputs C1/D1 or - * C2/D2 depending on the state of the SEL_CD input which is connected to - * the MPC8260 I/O port pin PA11. PA11 output (SEL_CD input) low (or 0) - * selects C1/D1 and PA11 output (SEL_CD input) high (or 1) selects C2/D2. - * - * PA11 defaults to output low (or 0) in the i/o port config table above. - * - * Output A provides a 100MHz for the High Speed Serial chips. Output B - * provides a 3.6864MHz clock for more accurate asynchronous serial bit - * rates. Output C is routed to the mezzanine connector but is currently - * unused - both C1 and C2 are set to 16MHz. Output D is used by both the - * alt-input and display mezzanine boards for their video chips. The - * alt-input board requires a clock of 24.576MHz and this is available on - * D1 (PA11=SEL_CD=0). The display board requires a clock of 27MHz and this - * is available on D2 (PA11=SEL_CD=1). - * - * So the default is a clock suitable for the alt-input board. PA11 is toggled - * later in misc_init_r(), if a display board is detected. - */ - -uchar fs6377_addr = 0x5c; - -uchar fs6377_regs[16] = { - 12, 75, 64, 25, 144, 128, 25, 192, - 0, 16, 135, 192, 224, 64, 64, 192 -}; - -/* ------------------------------------------------------------------------- */ - -/* - * special board initialisation, after clocks and timebase have been - * set up but before environment and serial are initialised. - * - * added so that very early initialisations can be done using the i2c - * driver (which requires the clocks, to calculate the dividers, and - * the timebase, for udelay()) - */ - -int -board_postclk_init (void) -{ - i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); - - /* - * Initialise the FS6377 clock chip - * - * the secondary address is the register number from where to - * start the write - I want to write all the registers - * - * don't bother checking return status - we have no console yet - * to print it on, nor any RAM to store it in - it will be obvious - * if this doesn't work - */ - (void) i2c_write (fs6377_addr, 0, 1, fs6377_regs, - sizeof (fs6377_regs)); - - return (0); -} - -/* ------------------------------------------------------------------------- */ - -/* - * Check Board Identity: Hardwired to HYMOD - */ - -int -checkboard (void) -{ - puts ("Board: HYMOD\n"); - return (0); -} - -/* ------------------------------------------------------------------------- */ - -/* - * miscellaneous (early - while running in flash) initialisations. - */ - -#define _NOT_USED_ 0xFFFFFFFF - -uint upmb_table[] = { - /* Read Single Beat (RSS) - offset 0x00 */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* Read Burst (RBS) - offset 0x08 */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* Write Single Beat (WSS) - offset 0x18 */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* Write Burst (WSS) - offset 0x20 */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* Refresh Timer (PTS) - offset 0x30 */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* Exception Condition (EXS) - offset 0x3c */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_ -}; - -uint upmc_table[] = { - /* Read Single Beat (RSS) - offset 0x00 */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* Read Burst (RBS) - offset 0x08 */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* Write Single Beat (WSS) - offset 0x18 */ - 0xF0E00000, 0xF0A00000, 0x00A00000, 0x30A00000, - 0xF0F40007, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* Write Burst (WSS) - offset 0x20 */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* Refresh Timer (PTS) - offset 0x30 */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, - /* Exception Condition (EXS) - offset 0x3c */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_ -}; - -int -misc_init_f (void) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8260_t *memctl = &immap->im_memctl; - - printf ("UPMs: "); - - upmconfig (UPMB, upmb_table, sizeof upmb_table / sizeof upmb_table[0]); - memctl->memc_mbmr = CONFIG_SYS_MBMR; - - upmconfig (UPMC, upmc_table, sizeof upmc_table / sizeof upmc_table[0]); - memctl->memc_mcmr = CONFIG_SYS_MCMR; - - printf ("configured\n"); - return (0); -} - -/* ------------------------------------------------------------------------- */ - -phys_size_t -initdram (int board_type) -{ - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - volatile memctl8260_t *memctl = &immap->im_memctl; - volatile uchar c = 0, *ramaddr = (uchar *) (CONFIG_SYS_SDRAM_BASE + 0x8); - ulong psdmr = CONFIG_SYS_PSDMR; - int i; - - /* - * Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35): - * - * "At system reset, initialization software must set up the - * programmable parameters in the memory controller banks registers - * (ORx, BRx, P/LSDMR). After all memory parameters are configured, - * system software should execute the following initialization sequence - * for each SDRAM device. - * - * 1. Issue a PRECHARGE-ALL-BANKS command - * 2. Issue eight CBR REFRESH commands - * 3. Issue a MODE-SET command to initialize the mode register - * - * The initial commands are executed by setting P/LSDMR[OP] and - * accessing the SDRAM with a single-byte transaction." - * - * The appropriate BRx/ORx registers have already been set when we - * get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE. - */ - - memctl->memc_psrt = CONFIG_SYS_PSRT; - memctl->memc_mptpr = CONFIG_SYS_MPTPR; - - memctl->memc_psdmr = psdmr | PSDMR_OP_PREA; - *ramaddr = c; - - memctl->memc_psdmr = psdmr | PSDMR_OP_CBRR; - for (i = 0; i < 8; i++) - *ramaddr = c; - - memctl->memc_psdmr = psdmr | PSDMR_OP_MRW; - *ramaddr = c; - - memctl->memc_psdmr = psdmr | PSDMR_OP_NORM | PSDMR_RFEN; - *ramaddr = c; - - return (CONFIG_SYS_SDRAM_SIZE << 20); -} - -/* ------------------------------------------------------------------------- */ -/* miscellaneous initialisations after relocation into ram (misc_init_r) */ -/* */ -/* loads the data in the main board and mezzanine board eeproms into */ -/* the hymod configuration struct stored in the board information area. */ -/* */ -/* if the contents of either eeprom is invalid, prompts for a serial */ -/* number (and an ethernet address if required) then fetches a file */ -/* containing information to be stored in the eeprom from the tftp server */ -/* (the file name is based on the serial number and a built-in path) */ - -int -last_stage_init (void) -{ - hymod_conf_t *cp = &gd->bd->bi_hymod_conf; - int rc; - - /* - * we use the cli_readline() function, but we also want - * command timeout enabled - */ - bootretry_init_cmd_timeout(); - - memset ((void *) cp, 0, sizeof (*cp)); - - /* set up main board config info */ - - rc = hymod_eeprom_read (0, &cp->main.eeprom); - - puts ("EEPROM:main..."); - if (rc < 0) - puts ("NOT PRESENT\n"); - else if (rc == 0) - puts ("INVALID\n"); - else { - cp->main.eeprom.valid = 1; - - printf ("OK (ver %u)\n", cp->main.eeprom.ver); - hymod_eeprom_print (&cp->main.eeprom); - - /* - * hard-wired assumption here: all hymod main boards will have - * one xilinx fpga, with the interrupt line connected to IRQ2 - * - * One day, this might be based on the board type - */ - - cp->main.xlx[0].mmap.prog.exists = 1; - cp->main.xlx[0].mmap.prog.size = FPGA_MAIN_CFG_SIZE; - cp->main.xlx[0].mmap.prog.base = FPGA_MAIN_CFG_BASE; - - cp->main.xlx[0].mmap.reg.exists = 1; - cp->main.xlx[0].mmap.reg.size = FPGA_MAIN_REG_SIZE; - cp->main.xlx[0].mmap.reg.base = FPGA_MAIN_REG_BASE; - - cp->main.xlx[0].mmap.port.exists = 1; - cp->main.xlx[0].mmap.port.size = FPGA_MAIN_PORT_SIZE; - cp->main.xlx[0].mmap.port.base = FPGA_MAIN_PORT_BASE; - - cp->main.xlx[0].iopins.prog_pin.port = FPGA_MAIN_PROG_PORT; - cp->main.xlx[0].iopins.prog_pin.pin = FPGA_MAIN_PROG_PIN; - cp->main.xlx[0].iopins.prog_pin.flag = 1; - cp->main.xlx[0].iopins.init_pin.port = FPGA_MAIN_INIT_PORT; - cp->main.xlx[0].iopins.init_pin.pin = FPGA_MAIN_INIT_PIN; - cp->main.xlx[0].iopins.init_pin.flag = 1; - cp->main.xlx[0].iopins.done_pin.port = FPGA_MAIN_DONE_PORT; - cp->main.xlx[0].iopins.done_pin.pin = FPGA_MAIN_DONE_PIN; - cp->main.xlx[0].iopins.done_pin.flag = 1; -#ifdef FPGA_MAIN_ENABLE_PORT - cp->main.xlx[0].iopins.enable_pin.port = FPGA_MAIN_ENABLE_PORT; - cp->main.xlx[0].iopins.enable_pin.pin = FPGA_MAIN_ENABLE_PIN; - cp->main.xlx[0].iopins.enable_pin.flag = 1; -#endif - - cp->main.xlx[0].irq = FPGA_MAIN_IRQ; - } - - /* set up mezzanine board config info */ - - rc = hymod_eeprom_read (1, &cp->mezz.eeprom); - - puts ("EEPROM:mezz..."); - if (rc < 0) - puts ("NOT PRESENT\n"); - else if (rc == 0) - puts ("INVALID\n"); - else { - cp->main.eeprom.valid = 1; - - printf ("OK (ver %u)\n", cp->mezz.eeprom.ver); - hymod_eeprom_print (&cp->mezz.eeprom); - } - - cp->crc = crc32 (0, (unsigned char *)cp, offsetof (hymod_conf_t, crc)); - - hymod_check_env (); - - return (0); -} - -#ifdef CONFIG_SHOW_ACTIVITY -void board_show_activity (ulong timebase) -{ -#ifdef CONFIG_SYS_HYMOD_DBLEDS - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; - volatile iop8260_t *iop = &immr->im_ioport; - static int shift = 0; - - if ((timestamp % CONFIG_SYS_HZ) == 0) { - if (++shift > 3) - shift = 0; - iop->iop_pdatd = - (iop->iop_pdatd & ~0x0f000000) | (1 << (24 + shift)); - } -#endif /* CONFIG_SYS_HYMOD_DBLEDS */ -} - -void show_activity(int arg) -{ -} -#endif /* CONFIG_SHOW_ACTIVITY */ diff --git a/board/hymod/hymod.h b/board/hymod/hymod.h deleted file mode 100644 index 7024d8a807..0000000000 --- a/board/hymod/hymod.h +++ /dev/null @@ -1,305 +0,0 @@ -/* - * (C) Copyright 2001 - * Murray Jensen, CSIRO-MIT, <Murray.Jensen@csiro.au> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _HYMOD_H_ -#define _HYMOD_H_ - -#ifdef CONFIG_MPC8260 -#include <asm/iopin_8260.h> -#endif - -/* - * hymod configuration data - passed by boot code via the board information - * structure (only U-Boot has support for this at the moment) - * - * there are three types of data passed up from the boot monitor. the first - * (type hymod_eeprom_t) is the eeprom data that was read off both the main - * (or mother) board and the mezzanine board (if any). this data defines how - * many Xilinx fpgas are on each board, and their types (among other things). - * the second type of data (type xlx_mmap_t, one per Xilinx fpga) defines where - * in the physical address space the various Xilinx fpga access regions have - * been mapped by the boot rom. the third type of data (type xlx_iopins_t, - * one per Xilinx fpga) defines which io port pins are connected to the various - * signals required to program a Xilinx fpga. - * - * A ram/flash "bank" refers to memory controlled by the same chip select. - * - * the eeprom contents are defined as in technical note #2 - basically, - * a header, zero or more records in no particular order, and a 32 bit crc - * a record is 1 or more type bytes, a length byte and "length" bytes. - */ - -#define HYMOD_EEPROM_ID 0xAA /* eeprom id byte */ -#define HYMOD_EEPROM_VER 1 /* eeprom contents version (0-127) */ -#define HYMOD_EEPROM_SIZE 256 /* number of bytes in the eeprom */ - -/* eeprom header */ -typedef - struct { - unsigned char id; /* eeprom id byte */ - unsigned char :1; - unsigned char ver:7; /* eeprom contents version number */ - unsigned long len; /* total # of bytes btw hdr and crc */ - } -hymod_eehdr_t; - -/* maximum number of bytes available for eeprom data records */ -#define HYMOD_EEPROM_MAXLEN (HYMOD_EEPROM_SIZE \ - - sizeof (hymod_eehdr_t) \ - - sizeof (unsigned long)) - -/* eeprom data record */ -typedef - union { - struct { - unsigned char topbit:1; - unsigned char type:7; - unsigned char len; - unsigned char data[1]; /* variable length */ - } small; - struct { - unsigned short topbit:1; - unsigned short nxtbit:1; - unsigned short type:14; - unsigned short len; - unsigned char data[1]; /* variable length */ - } medium; - struct { - unsigned long topbit:1; - unsigned long nxtbit:1; - unsigned long type:30; - unsigned long len; - unsigned char data[1]; /* variable length */ - } large; - } -hymod_eerec_t; - -#define HYMOD_EEOFF_MAIN 0x00 /* i2c addr offset for main eeprom */ -#define HYMOD_EEOFF_MEZZ 0x04 /* i2c addr offset for mezz eepomr */ - -/* eeprom record types */ -#define HYMOD_EEREC_SERNO 1 /* serial number */ -#define HYMOD_EEREC_DATE 2 /* date */ -#define HYMOD_EEREC_BATCH 3 /* batch id */ -#define HYMOD_EEREC_TYPE 4 /* board type */ -#define HYMOD_EEREC_REV 5 /* revision number */ -#define HYMOD_EEREC_SDRAM 6 /* sdram sizes */ -#define HYMOD_EEREC_FLASH 7 /* flash sizes */ -#define HYMOD_EEREC_ZBT 8 /* zbt ram sizes */ -#define HYMOD_EEREC_XLXTYP 9 /* Xilinx fpga types */ -#define HYMOD_EEREC_XLXSPD 10 /* Xilinx fpga speeds */ -#define HYMOD_EEREC_XLXTMP 11 /* Xilinx fpga temperatures */ -#define HYMOD_EEREC_XLXGRD 12 /* Xilinx fpga grades */ -#define HYMOD_EEREC_CPUTYP 13 /* Motorola CPU type */ -#define HYMOD_EEREC_CPUSPD 14 /* CPU speed */ -#define HYMOD_EEREC_BUSSPD 15 /* bus speed */ -#define HYMOD_EEREC_CPMSPD 16 /* CPM speed */ -#define HYMOD_EEREC_HSTYPE 17 /* high-speed serial chip type */ -#define HYMOD_EEREC_HSCHIN 18 /* high-speed serial input channels */ -#define HYMOD_EEREC_HSCHOUT 19 /* high-speed serial output channels */ - -/* some dimensions */ -#define HYMOD_MAX_BATCH 32 /* max no. of bytes in batch id */ -#define HYMOD_MAX_SDRAM 4 /* max sdram "banks" on any board */ -#define HYMOD_MAX_FLASH 4 /* max flash "banks" on any board */ -#define HYMOD_MAX_ZBT 16 /* max ZBT rams on any board */ -#define HYMOD_MAX_XLX 4 /* max Xilinx fpgas on any board */ - -#define HYMOD_MAX_BYTES 16 /* enough to store any bytes array */ - -/* board types */ -#define HYMOD_BDTYPE_NONE 0 /* information not present */ -#define HYMOD_BDTYPE_IO 1 /* I/O main board */ -#define HYMOD_BDTYPE_CLP 2 /* CLP main board */ -#define HYMOD_BDTYPE_DSP 3 /* DSP main board */ -#define HYMOD_BDTYPE_INPUT 4 /* video input mezzanine board */ -#define HYMOD_BDTYPE_ALTINPUT 5 /* video input mezzanine board */ -#define HYMOD_BDTYPE_DISPLAY 6 /* video display mezzanine board */ -#define HYMOD_BDTYPE_MAX 7 /* first invalid value */ - -/* Xilinx fpga types */ -#define HYMOD_XTYP_NONE 0 /* information not present */ -#define HYMOD_XTYP_XCV300E 1 /* Xilinx Virtex 300 */ -#define HYMOD_XTYP_XCV400E 2 /* Xilinx Virtex 400 */ -#define HYMOD_XTYP_XCV600E 3 /* Xilinx Virtex 600 */ -#define HYMOD_XTYP_MAX 4 /* first invalid value */ - -/* Xilinx fpga speeds */ -#define HYMOD_XSPD_NONE 0 /* information not present */ -#define HYMOD_XSPD_SIX 1 -#define HYMOD_XSPD_SEVEN 2 -#define HYMOD_XSPD_EIGHT 3 -#define HYMOD_XSPD_MAX 4 /* first invalid value */ - -/* Xilinx fpga temperatures */ -#define HYMOD_XTMP_NONE 0 /* information not present */ -#define HYMOD_XTMP_COM 1 -#define HYMOD_XTMP_IND 2 -#define HYMOD_XTMP_MAX 3 /* first invalid value */ - -/* Xilinx fpga grades */ -#define HYMOD_XTMP_NONE 0 /* information not present */ -#define HYMOD_XTMP_NORMAL 1 -#define HYMOD_XTMP_ENGSAMP 2 -#define HYMOD_XTMP_MAX 3 /* first invalid value */ - -/* CPU types */ -#define HYMOD_CPUTYPE_NONE 0 /* information not present */ -#define HYMOD_CPUTYPE_MPC8260 1 /* Motorola MPC8260 embedded powerpc */ -#define HYMOD_CPUTYPE_MAX 2 /* first invalid value */ - -/* CPU/BUS/CPM clock speeds */ -#define HYMOD_CLKSPD_NONE 0 /* information not present */ -#define HYMOD_CLKSPD_33MHZ 1 -#define HYMOD_CLKSPD_66MHZ 2 -#define HYMOD_CLKSPD_100MHZ 3 -#define HYMOD_CLKSPD_133MHZ 4 -#define HYMOD_CLKSPD_166MHZ 5 -#define HYMOD_CLKSPD_200MHZ 6 -#define HYMOD_CLKSPD_MAX 7 /* first invalid value */ - -/* high speed serial chip types */ -#define HYMOD_HSSTYPE_NONE 0 /* information not present */ -#define HYMOD_HSSTYPE_AMCC52064 1 -#define HYMOD_HSSTYPE_MAX 2 /* first invalid value */ - -/* a date (yyyy-mm-dd) */ -typedef - struct { - unsigned short year; - unsigned char month; - unsigned char day; - } -hymod_date_t; - -/* describes a Xilinx fpga */ -typedef - struct { - unsigned char type; /* chip type */ - unsigned char speed; /* chip speed rating */ - unsigned char temp; /* chip temperature rating */ - unsigned char grade; /* chip grade */ - } -hymod_xlx_t; - -/* describes a Motorola embedded processor */ -typedef - struct { - unsigned char type; /* CPU type */ - unsigned char cpuspd; /* speed of the PowerPC core */ - unsigned char busspd; /* speed of the system and 60x bus */ - unsigned char cpmspd; /* speed of the CPM co-processor */ - } -hymod_mpc_t; - -/* info about high-speed (1Gbit) serial interface */ -typedef - struct { - unsigned char type; /* high-speed serial chip type */ - unsigned char nchin; /* number of input channels mounted */ - unsigned char nchout; /* number of output channels mounted */ - } -hymod_hss_t; - -/* - * this defines the contents of the serial eeprom that exists on every - * hymod board, including mezzanine boards (the serial eeprom will be - * faked for early development boards that don't have one) - */ - -typedef - struct { - unsigned char valid:1; /* contents of this struct is valid */ - unsigned char ver:7; /* eeprom contents version */ - unsigned char bdtype; /* board type */ - unsigned char bdrev; /* board revision */ - unsigned char batchlen; /* length of batch string below */ - unsigned long serno; /* serial number */ - hymod_date_t date; /* manufacture date */ - unsigned char batch[32]; /* manufacturer specific batch id */ - unsigned char nsdram; /* # of ram "banks" */ - unsigned char nflash; /* # of flash "banks" */ - unsigned char nzbt; /* # of ZBT rams */ - unsigned char nxlx; /* # of Xilinx fpgas */ - unsigned char sdramsz[HYMOD_MAX_SDRAM]; /* log2 of sdram size */ - unsigned char flashsz[HYMOD_MAX_FLASH]; /* log2 of flash size */ - unsigned char zbtsz[HYMOD_MAX_ZBT]; /* log2 of ZBT ram size */ - hymod_xlx_t xlx[HYMOD_MAX_XLX]; /* Xilinx fpga info */ - hymod_mpc_t mpc; /* Motorola MPC CPU info */ - hymod_hss_t hss; /* high-speed serial info */ - } -hymod_eeprom_t; - -/* - * this defines a region in the processor's physical address space - */ -typedef - struct { - unsigned long exists:1; /* 1 if the region exists, 0 if not */ - unsigned long size:31; /* size in bytes */ - unsigned long base; /* base address */ - } -xlx_prgn_t; - -/* - * this defines where the various Xilinx fpga access regions are mapped - * into the physical address space of the processor - */ -typedef - struct { - xlx_prgn_t prog; /* program access region */ - xlx_prgn_t reg; /* register access region */ - xlx_prgn_t port; /* port access region */ - } -xlx_mmap_t; - -/* - * this defines which 8260 i/o port pins are connected to the various - * signals required for programming a Xilinx fpga - */ -typedef - struct { - iopin_t prog_pin; /* assert for >= 300ns to program */ - iopin_t init_pin; /* goes high when fpga is cleared */ - iopin_t done_pin; /* goes high when program is done */ - iopin_t enable_pin; /* some fpgas need enabling */ - } -xlx_iopins_t; - -/* all info about one Xilinx chip */ -typedef - struct { - xlx_mmap_t mmap; - xlx_iopins_t iopins; - unsigned long irq:8; /* h/w intr req number for this fpga */ - } -xlx_info_t; - -/* all info about one hymod board */ -typedef - struct { - hymod_eeprom_t eeprom; - xlx_info_t xlx[HYMOD_MAX_XLX]; - } -hymod_board_t; - -/* - * this defines the configuration information of a hymod board-set - * (main board + possible mezzanine board). In future, there may be - * more than one mezzanine board (stackable?) - if so, add a "mezz2" - * field, and so on... or make mezz an array? - */ -typedef - struct { - unsigned long ver:8; /* version control */ - hymod_board_t main; /* main board info */ - hymod_board_t mezz; /* mezzanine board info */ - unsigned long crc; /* ensures kernel and boot prom agree */ - } -hymod_conf_t; - -#endif /* _HYMOD_H_ */ diff --git a/board/hymod/input.c b/board/hymod/input.c deleted file mode 100644 index a9035d3405..0000000000 --- a/board/hymod/input.c +++ /dev/null @@ -1,91 +0,0 @@ -/* - * (C) Copyright 2003 - * Murray Jensen, CSIRO-MIT, <Murray.Jensen@csiro.au> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <bootretry.h> -#include <cli.h> - -int -hymod_get_serno (const char *prompt) -{ - for (;;) { - int n, serno; - char *p; - - bootretry_reset_cmd_timeout(); - - n = cli_readline(prompt); - - if (n < 0) - return (n); - - if (n == 0) - continue; - - serno = (int) simple_strtol (console_buffer, &p, 10); - - if (p > console_buffer && *p == '\0' && serno > 0) - return (serno); - - printf ("Invalid number (%s) - please re-enter\n", - console_buffer); - } -} - -int -hymod_get_ethaddr (void) -{ - for (;;) { - int n; - - bootretry_reset_cmd_timeout(); - - n = cli_readline("Enter board ethernet address: "); - - if (n < 0) - return (n); - - if (n == 0) - continue; - - if (n == 17) { - int i; - char *p, *q; - - /* see if it looks like an ethernet address */ - - p = console_buffer; - - for (i = 0; i < 6; i++) { - char term = (i == 5 ? '\0' : ':'); - - (void)simple_strtol (p, &q, 16); - - if ((q - p) != 2 || *q++ != term) - break; - - p = q; - } - - if (i == 6) { - /* it looks ok - set it */ - printf ("Setting ethernet addr to %s\n", - console_buffer); - - setenv ("ethaddr", console_buffer); - - puts ("Remember to do a 'saveenv' to " - "make it permanent\n"); - - return (0); - } - } - - printf ("Invalid ethernet addr (%s) - please re-enter\n", - console_buffer); - } -} diff --git a/board/hymod/u-boot.lds b/board/hymod/u-boot.lds deleted file mode 100644 index 1dfd2b20f7..0000000000 --- a/board/hymod/u-boot.lds +++ /dev/null @@ -1,132 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - arch/powerpc/cpu/mpc8260/start.o (.text) -/* - common/dlmalloc.o (.text) - arch/powerpc/lib/ppcstring.o (.text) - lib/vsprintf.o (.text) - lib/crc32.o (.text) - lib/zlib.o (.text) - - . = env_offset; -*/ - common/env_embedded.o(.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x0FFF) & 0xFFFFF000; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - _GOT2_TABLE_ = .; - KEEP(*(.got2)) - KEEP(*(.got)) - PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(4096); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(4096); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - } - . = ALIGN(256 * 1024); - .ppcenv : - { - common/env_embedded.o (.ppcenv) - } - . = ALIGN(4); - __bss_end = . ; - PROVIDE (end = .); -} diff --git a/board/hymod/u-boot.lds.debug b/board/hymod/u-boot.lds.debug deleted file mode 100644 index b9c84c77d6..0000000000 --- a/board/hymod/u-boot.lds.debug +++ /dev/null @@ -1,121 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - arch/powerpc/cpu/mpc8xx/start.o (.text) - common/dlmalloc.o (.text) - lib/vsprintf.o (.text) - lib/crc32.o (.text) - - . = env_offset; - common/env_embedded.o(.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.rodata) - *(.rodata1) - *(.rodata.str1.4) - *(.eh_frame) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x0FFF) & 0xFFFFF000; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(4096); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(4096); - __init_end = .; - - __bss_start = .; - .bss : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - } - __bss_end = . ; - PROVIDE (end = .); -} diff --git a/configs/hymod_defconfig b/configs/hymod_defconfig deleted file mode 100644 index a6dc1d88a9..0000000000 --- a/configs/hymod_defconfig +++ /dev/null @@ -1,3 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC8260=y -CONFIG_TARGET_HYMOD=y diff --git a/doc/README.scrapyard b/doc/README.scrapyard index 9eccfa26f3..23fd760abb 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -12,6 +12,7 @@ The list should be sorted in reverse chronological order. Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= +hymod powerpc mpc8260 - - Murray Jensen <Murray.Jensen@csiro.au> MHPC powerpc mpc8xx - - Frank Gottschling <fgottschling@eltec.de> ICU862 powerpc mpc8xx - - Wolfgang Denk <wd@denx.de> CPCI750 powerpc 74xx_7xx - - Reinhard Arlt <reinhard.arlt@esd-electronics.com> diff --git a/include/asm-generic/u-boot.h b/include/asm-generic/u-boot.h index 62cb1eabc1..aef39d7884 100644 --- a/include/asm-generic/u-boot.h +++ b/include/asm-generic/u-boot.h @@ -79,9 +79,6 @@ typedef struct bd_info { unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */ unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */ #endif -#if defined(CONFIG_HYMOD) - hymod_conf_t bi_hymod_conf; /* hymod configuration information */ -#endif #ifdef CONFIG_HAS_ETH1 unsigned char bi_enet1addr[6]; /* OLD: see README.enetaddr */ diff --git a/include/common.h b/include/common.h index bcf6c7e950..a5764d8055 100644 --- a/include/common.h +++ b/include/common.h @@ -69,9 +69,6 @@ typedef volatile unsigned char vu_char; #ifdef CONFIG_4xx #include <asm/ppc4xx.h> #endif -#ifdef CONFIG_HYMOD -#include <board/hymod/hymod.h> -#endif #ifdef CONFIG_ARM #define asmlinkage /* nothing */ #endif diff --git a/include/configs/hymod.h b/include/configs/hymod.h deleted file mode 100644 index c973365e12..0000000000 --- a/include/configs/hymod.h +++ /dev/null @@ -1,728 +0,0 @@ -/* - * (C) Copyright 2000 - * Murray Jensen <Murray.Jensen@cmst.csiro.au> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Config header file for Hymod board - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_HYMOD 1 /* ...on a Hymod board */ -#define CONFIG_CPM2 1 /* Has a CPM2 */ - -#define CONFIG_SYS_TEXT_BASE 0x40000000 - -#define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */ - -#define CONFIG_BOARD_POSTCLK_INIT /* have board_postclk_init() function */ - -/* - * select serial console configuration - * - * if either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then - * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4 - * for SCC). - * - * if CONFIG_CONS_NONE is defined, then the serial console routines must - * defined elsewhere (for example, on the cogent platform, there are serial - * ports on the motherboard which are used for the serial console - see - * cogent/cma101/serial.[ch]). - */ -#undef CONFIG_CONS_ON_SMC /* define if console on SMC */ -#define CONFIG_CONS_ON_SCC /* define if console on SCC */ -#undef CONFIG_CONS_NONE /* define if console on something else*/ -#define CONFIG_CONS_INDEX 1 /* which serial channel for console */ -#define CONFIG_CONS_USE_EXTC /* SMC/SCC use ext clock not brg_clk */ -#define CONFIG_CONS_EXTC_RATE 3686400 /* SMC/SCC ext clk rate in Hz */ -#define CONFIG_CONS_EXTC_PINSEL 0 /* pin select 0=CLK3/CLK9,1=CLK5/CLK15*/ - -/* - * select ethernet configuration - * - * if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then - * CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3 - * for FCC) - * - * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be - * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset. - */ -#undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */ -#define CONFIG_ETHER_ON_FCC /* define if ether on FCC */ -#undef CONFIG_ETHER_NONE /* define if ether on something else */ -#define CONFIG_ETHER_INDEX 1 /* which channel for ether */ -#define CONFIG_ETHER_LOOPBACK_TEST /* add ether external loopback test */ - -#ifdef CONFIG_ETHER_ON_FCC - -#if (CONFIG_ETHER_INDEX == 1) - -/* - * - Rx-CLK is CLK10 - * - Tx-CLK is CLK11 - * - RAM for BD/Buffers is on the 60x Bus (see 28-13) - * - Enable Full Duplex in FSMR - */ -# define CONFIG_SYS_CMXFCR_MASK1 (CMXFCR_FC1|CMXFCR_RF1CS_MSK|CMXFCR_TF1CS_MSK) -# define CONFIG_SYS_CMXFCR_VALUE1 (CMXFCR_RF1CS_CLK10|CMXFCR_TF1CS_CLK11) -# define CONFIG_SYS_CPMFCR_RAMTYPE 0 -# define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE|FCC_PSMR_LPB) - -# define MDIO_PORT 0 /* Port A */ -# define MDIO_DECLARE volatile ioport_t *iop = ioport_addr ( \ - (immap_t *) CONFIG_SYS_IMMR, MDIO_PORT ) -# define MDC_DECLARE MDIO_DECLARE - -# define MDIO_DATA_PINMASK 0x00040000 /* Pin 13 */ -# define MDIO_CLCK_PINMASK 0x00080000 /* Pin 12 */ - -#elif (CONFIG_ETHER_INDEX == 2) - -/* - * - Rx-CLK is CLK13 - * - Tx-CLK is CLK14 - * - RAM for BD/Buffers is on the 60x Bus (see 28-13) - * - Enable Full Duplex in FSMR - */ -# define CONFIG_SYS_CMXFCR_MASK2 (CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK) -# define CONFIG_SYS_CMXFCR_VALUE2 (CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14) -# define CONFIG_SYS_CPMFCR_RAMTYPE 0 -# define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE|FCC_PSMR_LPB) - -# define MDIO_PORT 0 /* Port A */ -# define MDIO_DECLARE volatile ioport_t *iop = ioport_addr ( \ - (immap_t *) CONFIG_SYS_IMMR, MDIO_PORT ) -# define MDC_DECLARE MDIO_DECLARE - -# define MDIO_DATA_PINMASK 0x00000040 /* Pin 25 */ -# define MDIO_CLCK_PINMASK 0x00000080 /* Pin 24 */ - -#elif (CONFIG_ETHER_INDEX == 3) - -/* - * - Rx-CLK is CLK15 - * - Tx-CLK is CLK16 - * - RAM for BD/Buffers is on the 60x Bus (see 28-13) - * - Enable Full Duplex in FSMR - */ -# define CONFIG_SYS_CMXFCR_MASK3 (CMXFCR_FC3|CMXFCR_RF3CS_MSK|CMXFCR_TF3CS_MSK) -# define CONFIG_SYS_CMXFCR_VALUE3 (CMXFCR_RF3CS_CLK15|CMXFCR_TF3CS_CLK16) -# define CONFIG_SYS_CPMFCR_RAMTYPE 0 -# define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE|FCC_PSMR_LPB) - -# define MDIO_PORT 0 /* Port A */ -# define MDIO_DECLARE volatile ioport_t *iop = ioport_addr ( \ - (immap_t *) CONFIG_SYS_IMMR, MDIO_PORT ) -# define MDC_DECLARE MDIO_DECLARE - -# define MDIO_DATA_PINMASK 0x00000100 /* Pin 23 */ -# define MDIO_CLCK_PINMASK 0x00000200 /* Pin 22 */ - -#endif /* CONFIG_ETHER_INDEX */ - -#define CONFIG_MII /* MII PHY management */ -#define CONFIG_BITBANGMII /* bit-bang MII PHY management */ - -#define MDIO_ACTIVE (iop->pdir |= MDIO_DATA_PINMASK) -#define MDIO_TRISTATE (iop->pdir &= ~MDIO_DATA_PINMASK) -#define MDIO_READ ((iop->pdat & MDIO_DATA_PINMASK) != 0) - -#define MDIO(bit) if(bit) iop->pdat |= MDIO_DATA_PINMASK; \ - else iop->pdat &= ~MDIO_DATA_PINMASK - -#define MDC(bit) if(bit) iop->pdat |= MDIO_CLCK_PINMASK; \ - else iop->pdat &= ~MDIO_CLCK_PINMASK - -#define MIIDELAY udelay(1) - -#endif /* CONFIG_ETHER_ON_FCC */ - - -/* other options */ -#define CONFIG_HARD_I2C 1 /* To enable I2C hardware support */ -#define CONFIG_DTT_ADM1021 1 /* ADM1021 temp sensor support */ - -/* system clock rate (CLKIN) - equal to the 60x and local bus speed */ -#ifdef DEBUG -#define CONFIG_8260_CLKIN 33333333 /* in Hz */ -#else -#define CONFIG_8260_CLKIN 66666666 /* in Hz */ -#endif - -#if defined(CONFIG_CONS_USE_EXTC) -#define CONFIG_BAUDRATE 115200 -#else -#define CONFIG_BAUDRATE 9600 -#endif - -/* default ip addresses - these will be overridden */ -#define CONFIG_IPADDR 192.168.1.1 /* hymod "boot" address */ -#define CONFIG_SERVERIP 192.168.1.254 /* hymod "server" address */ - -#define CONFIG_LAST_STAGE_INIT - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_BSP -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_CDP -#define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_DTT -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_ELF -#define CONFIG_CMD_FAT -#define CONFIG_CMD_I2C -#define CONFIG_CMD_IMMAP -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_KGDB -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING -#define CONFIG_CMD_PORTIO -#define CONFIG_CMD_REGINFO -#define CONFIG_CMD_SAVES -#define CONFIG_CMD_SDRAM -#define CONFIG_CMD_SNTP - -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_XIMG - -#ifdef DEBUG -#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ -#else -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ -#define CONFIG_BOOT_RETRY_TIME 30 /* retry autoboot after 30 secs */ -#define CONFIG_BOOT_RETRY_MIN 1 /* can go down to 1 second timeout */ -/* Be selective on what keys can delay or stop the autoboot process - * To stop use: " " - */ -#define CONFIG_AUTOBOOT_KEYED -#define CONFIG_AUTOBOOT_PROMPT "Autobooting in %d seconds, " \ - "press <SPACE> to stop\n", bootdelay -#define CONFIG_AUTOBOOT_STOP_STR " " -#undef CONFIG_AUTOBOOT_DELAY_STR -#define DEBUG_BOOTKEYS 0 -#endif - -#if defined(CONFIG_CMD_KGDB) -#undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */ -#define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */ -#undef CONFIG_KGDB_NONE /* define if kgdb on something else */ -#define CONFIG_KGDB_INDEX 2 /* which serial channel for kgdb */ -#define CONFIG_KGDB_USE_EXTC /* SMC/SCC use ext clock not brg_clk */ -#define CONFIG_KGDB_EXTC_RATE 3686400 /* serial ext clk rate in Hz */ -#define CONFIG_KGDB_EXTC_PINSEL 0 /* pin select 0=CLK3/CLK9,1=CLK5/CLK15*/ -# if defined(CONFIG_KGDB_USE_EXTC) -#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port at */ -# else -#define CONFIG_KGDB_BAUDRATE 9600 /* speed to run kgdb serial port at */ -# endif -#endif - -#undef CONFIG_WATCHDOG /* disable platform specific watchdog */ - -#define CONFIG_RTC_PCF8563 /* use Philips PCF8563 RTC */ - -/* - * Hymod specific configurable options - */ -#undef CONFIG_SYS_HYMOD_DBLEDS /* walk mezz board LEDs */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x03c00000 /* 4 ... 60 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - -#define CONFIG_SYS_I2C_SPEED 50000 -#define CONFIG_SYS_I2C_SLAVE 0x7e - -/* these are for the ST M24C02 2kbit serial i2c eeprom */ -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* base address */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* bytes of address */ -/* mask of address bits that overflow into the "EEPROM chip address" */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x07 - -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* 16 byte write page size */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ - -#define CONFIG_SYS_I2C_MULTI_EEPROMS 1 /* hymod has two eeproms */ - -#define CONFIG_SYS_I2C_RTC_ADDR 0x51 /* philips PCF8563 RTC address */ - -/* - * standard dtt sensor configuration - bottom bit will determine local or - * remote sensor of the ADM1021, the rest determines index into - * CONFIG_SYS_DTT_ADM1021 array below. - * - * On HYMOD board, the remote sensor should be connected to the MPC8260 - * temperature diode thingy, but an errata said this didn't work and - * should be disabled - so it isn't connected. - */ -#if 0 -#define CONFIG_DTT_SENSORS { 0, 1 } -#else -#define CONFIG_DTT_SENSORS { 0 } -#endif - -/* - * ADM1021 temp sensor configuration (see dtt/adm1021.c for details). - * there will be one entry in this array for each two (dummy) sensors in - * CONFIG_DTT_SENSORS. - * - * For HYMOD board: - * - only one ADM1021 - * - i2c addr 0x2a (both ADD0 and ADD1 are N/C) - * - conversion rate 0x02 = 0.25 conversions/second - * - ALERT ouput disabled - * - local temp sensor enabled, min set to 0 deg, max set to 85 deg - * - remote temp sensor disabled (see comment for CONFIG_DTT_SENSORS above) - */ -#define CONFIG_SYS_DTT_ADM1021 { { 0x2a, 0x02, 0, 1, 0, 85, 0, } } - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ - -/*----------------------------------------------------------------------- - * Hard Reset Configuration Words - * - * if you change bits in the HRCW, you must also change the CONFIG_SYS_* - * defines for the various registers affected by the HRCW e.g. changing - * HRCW_DPPCxx requires you to also change CONFIG_SYS_SIUMCR. - */ -#ifdef DEBUG -#define CONFIG_SYS_HRCW_MASTER (HRCW_BPS11|HRCW_CIP|HRCW_L2CPC01|HRCW_DPPC10|\ - HRCW_ISB100|HRCW_BMS|HRCW_MMR11|HRCW_APPC10|\ - HRCW_MODCK_H0010) -#else -#define CONFIG_SYS_HRCW_MASTER (HRCW_BPS11|HRCW_CIP|HRCW_L2CPC01|HRCW_DPPC10|\ - HRCW_ISB100|HRCW_BMS|HRCW_MMR11|HRCW_APPC10|\ - HRCW_MODCK_H0101) -#endif -/* no slaves so just duplicate the master hrcw */ -#define CONFIG_SYS_HRCW_SLAVE1 CONFIG_SYS_HRCW_MASTER -#define CONFIG_SYS_HRCW_SLAVE2 CONFIG_SYS_HRCW_MASTER -#define CONFIG_SYS_HRCW_SLAVE3 CONFIG_SYS_HRCW_MASTER -#define CONFIG_SYS_HRCW_SLAVE4 CONFIG_SYS_HRCW_MASTER -#define CONFIG_SYS_HRCW_SLAVE5 CONFIG_SYS_HRCW_MASTER -#define CONFIG_SYS_HRCW_SLAVE6 CONFIG_SYS_HRCW_MASTER -#define CONFIG_SYS_HRCW_SLAVE7 CONFIG_SYS_HRCW_MASTER - -/*----------------------------------------------------------------------- - * Internal Memory Mapped Register - */ -#define CONFIG_SYS_IMMR 0xF0000000 - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_FPGA_BASE 0x80000000 -/* - * unfortunately, CONFIG_SYS_MONITOR_LEN must include the - * (very large i.e. 256kB) environment flash sector - */ -#define CONFIG_SYS_MONITOR_LEN (512 << 10) /* Reserve 512 kB for Monitor*/ -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc()*/ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Mem map for Linux*/ - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max num of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 67 /* max num of sects on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Flash Erase Timeout (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SIZE 0x40000 /* Total Size of Environment Sector */ -#define CONFIG_ENV_SECT_SIZE 0x40000 /* see README - env sect real size */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE+CONFIG_SYS_MONITOR_LEN-CONFIG_ENV_SECT_SIZE) -#define CONFIG_SYS_USE_PPCENV /* Environment embedded in sect .ppcenv */ - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8260 CPU */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value*/ -#endif - -/*----------------------------------------------------------------------- - * HIDx - Hardware Implementation-dependent Registers 2-11 - *----------------------------------------------------------------------- - * HID0 also contains cache control - initially enable both caches and - * invalidate contents, then the final state leaves only the instruction - * cache enabled. Note that Power-On and Hard reset invalidate the caches, - * but Soft reset does not. - * - * HID1 has only read-only information - nothing to set. - */ -#define CONFIG_SYS_HID0_INIT (HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI|\ - HID0_IFEM|HID0_ABE) -#ifdef DEBUG -#define CONFIG_SYS_HID0_FINAL 0 -#else -#define CONFIG_SYS_HID0_FINAL (HID0_ICE|HID0_IFEM|HID0_ABE) -#endif -#define CONFIG_SYS_HID2 0 - -/*----------------------------------------------------------------------- - * RMR - Reset Mode Register 5-5 - *----------------------------------------------------------------------- - * turn on Checkstop Reset Enable - */ -#ifdef DEBUG -#define CONFIG_SYS_RMR 0 -#else -#define CONFIG_SYS_RMR RMR_CSRE -#endif - -/*----------------------------------------------------------------------- - * BCR - Bus Configuration 4-25 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_BCR (BCR_ETM) - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration 4-31 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_SIUMCR (SIUMCR_DPPC10|SIUMCR_L2CPC01|\ - SIUMCR_APPC10|SIUMCR_MMR11) - -/*----------------------------------------------------------------------- - * SYPCR - System Protection Control 4-35 - * SYPCR can only be written once after reset! - *----------------------------------------------------------------------- - * Watchdog & Bus Monitor Timer max, 60x & Local Bus Monitor enable - */ -#if defined(CONFIG_WATCHDOG) -#define CONFIG_SYS_SYPCR (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\ - SYPCR_SWRI|SYPCR_SWP|SYPCR_SWE) -#else -#define CONFIG_SYS_SYPCR (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\ - SYPCR_SWRI|SYPCR_SWP) -#endif /* CONFIG_WATCHDOG */ - -/*----------------------------------------------------------------------- - * TMCNTSC - Time Counter Status and Control 4-40 - *----------------------------------------------------------------------- - * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk, - * and enable Time Counter - */ -#define CONFIG_SYS_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE) - -/*----------------------------------------------------------------------- - * PISCR - Periodic Interrupt Status and Control 4-42 - *----------------------------------------------------------------------- - * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable - * Periodic timer - */ -#define CONFIG_SYS_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE) - -/*----------------------------------------------------------------------- - * SCCR - System Clock Control 9-8 - *----------------------------------------------------------------------- - * Ensure DFBRG is Divide by 16 - */ -#define CONFIG_SYS_SCCR (SCCR_DFBRG01) - -/*----------------------------------------------------------------------- - * RCCR - RISC Controller Configuration 13-7 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_RCCR 0 - -/* - * Init Memory Controller: - * - * Bank Bus Machine PortSz Device - * ---- --- ------- ------ ------ - * 0 60x GPCM 32 bit FLASH - * 1 60x GPCM 32 bit FLASH (same as 0 - unused for now) - * 2 60x SDRAM 64 bit SDRAM - * 3 Local UPMC 8 bit Main Xilinx configuration - * 4 Local GPCM 32 bit Main Xilinx register mode - * 5 Local UPMB 32 bit Main Xilinx port mode - * 6 Local UPMC 8 bit Mezz Xilinx configuration - */ - -/* - * Bank 0 - FLASH - * - * Quotes from the HYMOD IO Board Reference manual: - * - * "The flash memory is two Intel StrataFlash chips, each configured for - * 16 bit operation and connected to give a 32 bit wide port." - * - * "The chip select logic is configured to respond to both *CS0 and *CS1. - * Therefore the FLASH memory will be mapped to both bank 0 and bank 1. - * It is suggested that bank 0 be read-only and bank 1 be read/write. The - * FLASH will then appear as ROM during boot." - * - * Initially, we are only going to use bank 0 in read/write mode. - */ - -/* 32 bit, read-write, GPCM on 60x bus */ -#define CONFIG_SYS_BR0_PRELIM ((CONFIG_SYS_FLASH_BASE&BRx_BA_MSK)|\ - BRx_PS_32|BRx_MS_GPCM_P|BRx_V) -/* up to 32 Mb */ -#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(32)|ORxG_CSNT|ORxG_ACS_DIV2|ORxG_SCY_10_CLK) - -/* - * Bank 2 - SDRAM - * - * Quotes from the HYMOD IO Board Reference manual: - * - * "The main memory is implemented using TC59SM716FTL-10 SDRAM and has a - * fixed size of 64 Mbytes. The Toshiba TC59SM716FTL-10 is a CMOS synchronous - * dynamic random access memory organised as 4 banks by 4096 rows by 512 - * columns by 16 bits. Four chips provide a 64-bit port on the 60x bus." - * - * "The locations in SDRAM are accessed using multiplexed address pins to - * specify row and column. The pins also act to specify commands. The state - * of the inputs *RAS, *CAS and *WE defines the required action. The a10/AP - * pin may function as a row address or as the AUTO PRECHARGE control line, - * depending on the cycle type. The 60x bus SDRAM machine allows the MPC8260 - * address lines to be configured to the required multiplexing scheme." - */ - -#define CONFIG_SYS_SDRAM_SIZE 64 - -/* 64 bit, read-write, SDRAM on 60x bus */ -#define CONFIG_SYS_BR2_PRELIM ((CONFIG_SYS_SDRAM_BASE&BRx_BA_MSK)|\ - BRx_PS_64|BRx_MS_SDRAM_P|BRx_V) -/* 64 Mb, 4 int banks per dev, row start addr bit = A6, 12 row addr lines */ -#define CONFIG_SYS_OR2_PRELIM (MEG_TO_AM(CONFIG_SYS_SDRAM_SIZE)|\ - ORxS_BPD_4|ORxS_ROWST_PBI1_A6|ORxS_NUMR_12) - -/* - * The 60x Bus SDRAM Mode Register (PDSMR) is set as follows: - * - * Page Based Interleaving, Refresh Enable, Address Multiplexing where A5 - * is output on A16 pin (A6 on A17, and so on), use address pins A14-A16 - * as bank select, A7 is output on SDA10 during an ACTIVATE command, - * earliest timing for ACTIVATE command after REFRESH command is 6 clocks, - * earliest timing for ACTIVATE or REFRESH command after PRECHARGE command - * is 2 clocks, earliest timing for READ/WRITE command after ACTIVATE - * command is 2 clocks, earliest timing for PRECHARGE after last data - * was read is 1 clock, earliest timing for PRECHARGE after last data - * was written is 1 clock, CAS Latency is 2. - */ - -#define CONFIG_SYS_PSDMR (PSDMR_PBI|PSDMR_SDAM_A16_IS_A5|\ - PSDMR_BSMA_A14_A16|PSDMR_SDA10_PBI1_A7|\ - PSDMR_RFRC_6_CLK|PSDMR_PRETOACT_2W|\ - PSDMR_ACTTORW_2W|PSDMR_LDOTOPRE_1C|\ - PSDMR_WRC_1C|PSDMR_CL_2) - -/* - * The 60x bus-assigned SDRAM Refresh Timer (PSRT) (10-31) and the Refresh - * Timers Prescale (PTP) value in the Memory Refresh Timer Prescaler Register - * (MPTPR) (10-32) must also be set up (it used to be called the Periodic Timer - * Prescaler, hence the P instead of the R). The refresh timer period is given - * by (note that there was a change in the 8260 UM Errata): - * - * TimerPeriod = (PSRT + 1) / Fmptc - * - * where Fmptc is the BusClock divided by PTP. i.e. - * - * TimerPeriod = (PSRT + 1) / (BusClock / PTP) - * - * or - * - * TImerPeriod = (PTP * (PSRT + 1)) / BusClock - * - * The requirement for the Toshiba TC59SM716FTL-10 is that there must be - * 4K refresh cycles every 64 ms. i.e. one refresh cycle every 64000/4096 - * = 15.625 usecs. - * - * So PTP * (PSRT + 1) <= 15.625 * BusClock. At 66.666MHz, PSRT=31 and PTP=32 - * appear to be reasonable. - */ - -#ifdef DEBUG -#define CONFIG_SYS_PSRT 39 -#define CONFIG_SYS_MPTPR MPTPR_PTP_DIV8 -#else -#define CONFIG_SYS_PSRT 31 -#define CONFIG_SYS_MPTPR MPTPR_PTP_DIV32 -#endif - -/* - * Banks 3,4,5 and 6 - FPGA access - * - * Quotes from the HYMOD IO Board Reference manual: - * - * "The IO Board is fitted with a Xilinx XCV300E main FPGA. Provision is made - * for configuring an optional FPGA on the mezzanine interface. - * - * Access to the FPGAs may be divided into several catagories: - * - * 1. Configuration - * 2. Register mode access - * 3. Port mode access - * - * The main FPGA is supported for modes 1, 2 and 3. The mezzanine FPGA can be - * configured only (mode 1). Consequently there are four access types. - * - * To improve interface performance and simplify software design, the four - * possible access types are separately mapped to different memory banks. - * - * All are accessed using the local bus." - * - * Device Mode Memory Bank Machine Port Size Access - * - * Main Configuration 3 UPMC 8bit R/W - * Main Register 4 GPCM 32bit R/W - * Main Port 5 UPMB 32bit R/W - * Mezzanine Configuration 6 UPMC 8bit W/O - * - * "Note that mezzanine mode 1 access is write-only." - */ - -/* all the bank sizes must be a power of two, greater or equal to 32768 */ -#define FPGA_MAIN_CFG_BASE (CONFIG_SYS_FPGA_BASE) -#define FPGA_MAIN_CFG_SIZE 32768 -#define FPGA_MAIN_REG_BASE (FPGA_MAIN_CFG_BASE + FPGA_MAIN_CFG_SIZE) -#define FPGA_MAIN_REG_SIZE 32768 -#define FPGA_MAIN_PORT_BASE (FPGA_MAIN_REG_BASE + FPGA_MAIN_REG_SIZE) -#define FPGA_MAIN_PORT_SIZE 32768 -#define FPGA_MEZZ_CFG_BASE (FPGA_MAIN_PORT_BASE + FPGA_MAIN_PORT_SIZE) -#define FPGA_MEZZ_CFG_SIZE 32768 - -/* 8 bit, read-write, UPMC */ -#define CONFIG_SYS_BR3_PRELIM (FPGA_MAIN_CFG_BASE|BRx_PS_8|BRx_MS_UPMC|BRx_V) -/* up to 32Kbyte, burst inhibit */ -#define CONFIG_SYS_OR3_PRELIM (P2SZ_TO_AM(FPGA_MAIN_CFG_SIZE)|ORxU_BI) - -/* 32 bit, read-write, GPCM */ -#define CONFIG_SYS_BR4_PRELIM (FPGA_MAIN_REG_BASE|BRx_PS_32|BRx_MS_GPCM_L|BRx_V) -/* up to 32Kbyte */ -#define CONFIG_SYS_OR4_PRELIM (P2SZ_TO_AM(FPGA_MAIN_REG_SIZE)) - -/* 32 bit, read-write, UPMB */ -#define CONFIG_SYS_BR5_PRELIM (FPGA_MAIN_PORT_BASE|BRx_PS_32|BRx_MS_UPMB|BRx_V) -/* up to 32Kbyte */ -#define CONFIG_SYS_OR5_PRELIM (P2SZ_TO_AM(FPGA_MAIN_PORT_SIZE)|ORxU_BI) - -/* 8 bit, write-only, UPMC */ -#define CONFIG_SYS_BR6_PRELIM (FPGA_MEZZ_CFG_BASE|BRx_PS_8|BRx_MS_UPMC|BRx_V) -/* up to 32Kbyte, burst inhibit */ -#define CONFIG_SYS_OR6_PRELIM (P2SZ_TO_AM(FPGA_MEZZ_CFG_SIZE)|ORxU_BI) - -/*----------------------------------------------------------------------- - * MBMR - Machine B Mode 10-27 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_MBMR (MxMR_BSEL|MxMR_OP_NORM) /* XXX - needs more */ - -/*----------------------------------------------------------------------- - * MCMR - Machine C Mode 10-27 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_MCMR (MxMR_BSEL|MxMR_DSx_2_CYCL) /* XXX - needs more */ - -/* - * FPGA I/O Port/Bit information - */ - -#define FPGA_MAIN_PROG_PORT IOPIN_PORTA -#define FPGA_MAIN_PROG_PIN 4 /* PA4 */ -#define FPGA_MAIN_INIT_PORT IOPIN_PORTA -#define FPGA_MAIN_INIT_PIN 5 /* PA5 */ -#define FPGA_MAIN_DONE_PORT IOPIN_PORTA -#define FPGA_MAIN_DONE_PIN 6 /* PA6 */ - -#define FPGA_MEZZ_PROG_PORT IOPIN_PORTA -#define FPGA_MEZZ_PROG_PIN 0 /* PA0 */ -#define FPGA_MEZZ_INIT_PORT IOPIN_PORTA -#define FPGA_MEZZ_INIT_PIN 1 /* PA1 */ -#define FPGA_MEZZ_DONE_PORT IOPIN_PORTA -#define FPGA_MEZZ_DONE_PIN 2 /* PA2 */ -#define FPGA_MEZZ_ENABLE_PORT IOPIN_PORTA -#define FPGA_MEZZ_ENABLE_PIN 3 /* PA3 */ - -/* - * FPGA Interrupt configuration - */ -#define FPGA_MAIN_IRQ SIU_INT_IRQ2 - -/* - * JFFS2 partitions - * - */ -/* No command line, one static partition, whole device */ -#undef CONFIG_CMD_MTDPARTS -#define CONFIG_JFFS2_DEV "nor0" -#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF -#define CONFIG_JFFS2_PART_OFFSET 0x00000000 - -/* mtdparts command line support */ -/* -#define CONFIG_CMD_MTDPARTS -#define MTDIDS_DEFAULT "" -#define MTDPARTS_DEFAULT "" -*/ - -#endif /* __CONFIG_H */ diff --git a/tools/bddb/README b/tools/bddb/README deleted file mode 100644 index 9bee59a0fe..0000000000 --- a/tools/bddb/README +++ /dev/null @@ -1,116 +0,0 @@ -Hymod Board Database - -(C) Copyright 2001 -Murray Jensen <Murray.Jensen@csiro.au> -CSIRO Manufacturing Science and Technology, Preston Lab - -25-Jun-01 - -This stuff is a set of PHP/MySQL scripts to implement a custom board -database. It will need *extensive* hacking to modify it to keep the -information about your custom boards that you want, however it is a good -starting point. - -How it is used: - - 1. a board has gone through all the hardware testing etc and is - ready to have the flash programmed for the first time - first you - go to a web page and fill in information about the board in a form - to register it in a database - - 2. the web stuff allocates a (unique) serial number and (optionally) - a (locally administered) ethernet address and stores the information - in a database using the serial number as the key (can do whole - batches of boards in one go and/or use a previously registered board - as defaults for the new board(s)) - - 3. it then creates a file in the tftp area of a server somewhere - containing the board information in a simple text format (one - per serial number) - - 4. all hymod boards have an i2c eeprom, and when U-Boot sees that - the eeprom is unitialised, it prompts for a serial number and - ethernet address (if not set), then transfers the file created - in step 3 from the server and initialises the eeprom from its - contents - -What this means is you can't boot the board until you have allocated a serial -number, but you don't have to type it all twice - you do it once on the web -and the board then finds the info it needs to initialise its eeprom. The -other side of the coin is the reading of the eeprom and how it gets passed -to Linux (or another O/S). - -To see how this is all done for the hymod boards look at the code in the -"board/hymod" directory and in the file "include/asm/hymod.h". Hymod boards -can have a mezzanine card which also have an eeprom that needs allocating, -the same process is used for these as well - just a different i2c address. - -Other forms provide the following functions: - - - browsing the board database - - editing board information (one at a time) - - maintaining/browsing a (simple) per board event log - -You will need: MySQL (I use version 3.23.7-alpha), PHP4 (with MySQL -support enabled) and a web server (I use Apache 1.3.x). - -I originally started by using phpMyBuilder (http://kyber.dk/phpMyBuilder) -but it soon got far more complicated than that could handle (but I left -the copyright messages in there anyway). Most of the code resides in the -common defs.php file, which shouldn't need much alteration - all the work -will be in shaping the front-end php files to your liking. - -Here's a quick summary of what needs doing to use it for your boards: - -1. get phpMyAdmin (http://phpwizard.net/projects/phpMyAdmin/) - it's an - invaluable tool for this sort of stuff (this step is optional of course) - -2. edit "bddb.css" to your taste, if you could be bothered - I have no - idea what is in there or what it does - I copied it from somewhere else - ("user.css" from the phpMyEdit (http://phpmyedit.sourcerforge.net) package, - I think) - I figure one day I'll see what sort of things I can change - in there. - -3. create a mysql database - call it whatever you like - -4. edit "create_tables.sql" and modify the "boards" table schema to - reflect the information you want to keep about your boards. It may or - may not be easier to do this and the next step in phpMyAdmin. Check out - the MySQL documentation at http://www.mysql.com/doc/ in particular the - column types at http://www.mysql.com/doc/C/o/Column_types.html - Note - there is only support for a few data types: - - int - presented as an html text input - char/text - presented as an html text input - date - presented as an html text input - enum - presented as an html radio input - - I also have what I call "enum_multi" which is a set of enums with the - same name, but suffixed with a number e.g. fred0, fred1, fred2. These - are presented as a number of html select's with a single label "fred" - this is useful for board characteristics that have multiple items of - the same type e.g. multiple banks of sdram. - -5. use the "create_tables.sql" file to create the "boards" table in the - database e.g. mysql dbname < create_tables.sql - -6. create a user and password for the web server to log into the MySQL - database with; give this user select, insert and update privileges - to the database created in 3 (and delete, if you want the "delete" - functions in the edit forms to work- I have this turned off). phpMyAdmin - helps in this step. - -7. edit "config.php" and set the variables: $mysql_user, $mysql_pw, $mysql_db, - $bddb_cfgdir and $bddb_label - keep the contents of this file secret - it - contains the web servers username and password (the three $mysql_* vars - are set from the previous step) - -8. edit "defs.php" and a. adjust the various enum value arrays and b. edit - the function "pg_foot()" to remove my email address :-) - -9. do major hacking on the following files: browse.php, doedit.php, donew.php, - edit.php and new.php to reflect your database schema - fortunately the - hacking is fairly straight-forward, but it is boring and time-consuming. - -These notes were written rather hastily - if you find any obvious problems -please let me know. diff --git a/tools/bddb/badsubmit.php b/tools/bddb/badsubmit.php deleted file mode 100644 index 5092a31969..0000000000 --- a/tools/bddb/badsubmit.php +++ /dev/null @@ -1,23 +0,0 @@ -<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?> -<?php - // (C) Copyright 2001 - // Murray Jensen <Murray.Jensen@csiro.au> - // CSIRO Manufacturing Science and Technology, Preston Lab - - require("defs.php"); - pg_head("$bddb_label - Unknown Submit Type"); -?> -<center> - <font size="+4"> - <b> - The <?php echo "$bddb_label"; ?> form was submitted with an - unknown SUBMIT type <?php echo "(value was '$submit')" ?>. - <br></br> - Perhaps you typed the URL in directly? Click here to go to the - home page of the <a href="index.php"><?php echo "$bddb_label"; ?></a>. - </b> - </font> -</center> -<?php - pg_foot(); -?> diff --git a/tools/bddb/bddb.css b/tools/bddb/bddb.css deleted file mode 100644 index dee2b2ee49..0000000000 --- a/tools/bddb/bddb.css +++ /dev/null @@ -1,207 +0,0 @@ -BODY { - background: #e0ffff; - color: #000000; - font-family: Arial, Verdana, Helvetica; -} -H1 { - font-family: "Copperplate Gothic Bold"; - background: transparent; - color: #993300; - text-align: center; -} -H2, H3, H4, H5 { - background: transparent; - color: #993300; - margin-top: 4%; - text-align: center; -} -Body.Plain Div.Abstract, Body.Plain P.Abstract { - background: #cccc99; - color: #333300; - border: white; - padding: 3%; - font-family: Times, Verdana; -} -TH.Nav { - background: #0000cc; - color: #ff9900; -} -TH.Menu { - background: #3366cc; - color: #ff9900; -} -A:hover { - color: #ff6600; -} -A.Menu:hover { - color: #ff6600; -} -A.HoMe:hover { - color: #ff6600; -} -A.Menu { - background: transparent; - color: #ffcc33; - font-family: Verdana, Helvetica, Arial; - font-size: smaller; - text-decoration: none; -} -A.Menu:visited { - background: transparent; - color: #ffcc99; -} -A.HoMe { - background: transparent; - color: #ffcc33; - font-family: Verdana, Helvetica, Arial; - text-decoration:none; -} -A.HoMe:visited { - background: transparent; - color: #ffcc99; -} -TH.Xmp { - background: #eeeeee; - color: #330066; - font-family: courier; - font-weight: normal; -} -TH.LuT { - background: #cccccc; - color: #000000; -} -TD.LuT { - background: #ffffcc; - color: #000000; - font-size: 85%; -} -TH.Info, TD.Info { - background: #ffffcc; - color: #660000; - font-family: "Comic Sans MS", Cursive, Verdana; - font-size: smaller; -} -Div.Info, P.Info { - background: #ffff99; - color: #990033; - text-align: left; - padding: 2%; - font-family: "Comic Sans MS", Cursive, Verdana; - font-size: 85%; - } -Div.Info A { - background: transparent; - color: #ff6600; -} -.HL { - background: #ffff99; - color: #000000; -} -TD.HL { - background: #ccffff; - color: #000000; -} -Div.Margins { - width: 512px; - text-align: center; -} -TD.Plain { - background: #ffffcc; - color: #000033; -} -.Type { - background: #cccccc; - color: #660000; -} -.Name { - background: #eeeeee; - color: #660000; - vertical-align: top; - text-align: right; -} -.Value { - background: #ffffee; - color: #000066; -} -.Drop { - background: #333366; - color: #ffcc33; - font-family: "Copperplate Gothic Light", Helvetica, Verdana, Arial; -} -A.Button:hover { - color: #ff6600; -} -A.Button { - text-decoration:none; - color: #003366; - background: #ffcc66; -} -.Button { - font-size: 9pt; - text-align: center; - text-decoration:none; - color: #003366; - background: #ffcc66; - margin-bottom: 2pt; - border-top: 2px solid #ffff99; - border-left: 2px solid #ffff99; - border-right: 2px solid #cc9933; - border-bottom: 2px solid #cc9933; - font-family: Verdana, Arial, "Comic Sans MS"; -} -.Banner { - width: 468; - font-size: 12pt; - text-align: center; - text-decoration:none; - color: #003366; - background: #ffcc66; - border-top: 4px solid #ffff99; - border-left: 4px solid #ffff99; - border-right: 4px solid #cc9933; - border-bottom: 4px solid #cc9933; - font-family: Verdana, Arial, "Comic Sans MS"; -} -TD.Nova, Body.Nova { - background: #000000; - font-family: "Times New Roman"; - font-weight: light; - color: #ffcc00; -} -Body.Nova A.Button { - background: gold; - color: #003366; -} -Body.Nova A.Banner { - background: transparent; - color: #003366; -} -Body.Nova A { - background: transparent; - text-decoration:none; - color: #ffd766; -} -Body.Nova H1, Body.Nova H2, Body.Nova H3, Body.Nova H4 { - background: transparent; - color: white; - margin-top: 4%; - text-align: center; - filter: Blur(Add=1, Direction=0, Strength=8); -} -Body.Nova Div.Abstract { - background: #000000; - color: #ffffff; - font-family: Times, Verdana; -} -Body.Nova A.Abstract { - background: transparent; - color: #ffeedd; -} -Body.Nova TH.LuT { - background: black; - color: #ffff99; -} -Body.Nova TD.LuT { - background: navy; - color: #ffff99; -} diff --git a/tools/bddb/brlog.php b/tools/bddb/brlog.php deleted file mode 100644 index fccfbd011c..0000000000 --- a/tools/bddb/brlog.php +++ /dev/null @@ -1,109 +0,0 @@ -<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?> -<?php - // (C) Copyright 2001 - // Murray Jensen <Murray.Jensen@csiro.au> - // CSIRO Manufacturing Science and Technology, Preston Lab - - // list page (hymod_bddb / boards) - - require("defs.php"); - - pg_head("$bddb_label - Browse Board Log"); - - $serno=intval($serno); - if ($serno == 0) - die("serial number not specified or invalid!"); - - function print_cell($str) { - if ($str == '') - $str = ' '; - echo "\t<td>$str</td>\n"; - } -?> -<table align=center border=1 cellpadding=10> -<tr> -<th>serno / edit</th> -<th>ethaddr</th> -<th>date</th> -<th>batch</th> -<th>type</th> -<th>rev</th> -<th>location</th> -</tr> -<?php - $r=mysql_query("select * from boards where serno=$serno"); - - while($row=mysql_fetch_array($r)){ - foreach ($columns as $key) { - if (!key_in_array($key, $row)) - $row[$key] = ''; - } - - echo "<tr>\n"; - print_cell("<a href=\"edit.php?serno=$row[serno]\">$row[serno]</a>"); - print_cell($row['ethaddr']); - print_cell($row['date']); - print_cell($row['batch']); - print_cell($row['type']); - print_cell($row['rev']); - print_cell($row['location']); - echo "</tr>\n"; - } - - mysql_free_result($r); -?> -</table> -<hr></hr> -<p></p> -<?php - $limit=abs(isset($_REQUEST['limit'])?$_REQUEST['limit']:20); - $offset=abs(isset($_REQUEST['offset'])?$_REQUEST['offset']:0); - $lr=mysql_query("select count(*) as n from log where serno=$serno"); - $lrow=mysql_fetch_array($lr); - if($lrow['n']>$limit){ - $preoffset=max(0,$offset-$limit); - $postoffset=$offset+$limit; - echo "<table width=\"100%\">\n<tr align=center>\n"; - printf("<td><%sa href=\"%s?submit=Log&serno=$serno&offset=%d\"><img border=0 alt=\"<\" src=\"/icons/left.gif\"></a></td>\n", $offset>0?"":"no", $PHP_SELF, $preoffset); - printf("<td><%sa href=\"%s?submit=Log&serno=$serno&offset=%d\"><img border=0 alt=\">\" src=\"/icons/right.gif\"></a></td>\n", $postoffset<$lrow['n']?"":"no", $PHP_SELF, $postoffset); - echo "</tr>\n</table>\n"; - } - mysql_free_result($lr); -?> -<table width="100%" border=1 cellpadding=10> -<tr valign=top> -<th>logno / edit</th> -<th>date</th> -<th>who</th> -<th width="70%">details</th> -</tr> -<?php - $r=mysql_query("select * from log where serno=$serno order by logno limit $offset,$limit"); - - while($row=mysql_fetch_array($r)){ - echo "<tr>\n"; - print_cell("<a href=\"edlog.php?serno=$row[serno]&logno=$row[logno]\">$row[logno]</a>"); - print_cell($row['date']); - print_cell($row['who']); - print_cell("<pre>" . urldecode($row['details']) . "</pre>"); - echo "</tr>\n"; - } - - mysql_free_result($r); -?> -</table> -<hr></hr> -<p></p> -<table width="100%"> -<tr> - <td align=center> - <a href="newlog.php?serno=<?php echo "$serno"; ?>">Add to Log</a> - </td> - <td align=center> - <a href="index.php">Back to Start</a> - </td> -</tr> -</table> -<?php - pg_foot(); -?> diff --git a/tools/bddb/browse.php b/tools/bddb/browse.php deleted file mode 100644 index 675dfab749..0000000000 --- a/tools/bddb/browse.php +++ /dev/null @@ -1,147 +0,0 @@ -<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?> -<?php - // (C) Copyright 2001 - // Murray Jensen <Murray.Jensen@csiro.au> - // CSIRO Manufacturing Science and Technology, Preston Lab - - // list page (hymod_bddb / boards) - - require("defs.php"); - - $serno=isset($_REQUEST['serno'])?$_REQUEST['serno']:''; - - $verbose=isset($_REQUEST['verbose'])?intval($_REQUEST['verbose']):0; - - pg_head("$bddb_label - Browse database" . ($verbose?" (verbose)":"")); -?> -<p></p> -<?php - $limit=isset($_REQUEST['limit'])?abs(intval($_REQUEST['limit'])):20; - $offset=isset($_REQUEST['offset'])?abs(intval($_REQUEST['offset'])):0; - - if ($serno == '') { - - $lr=mysql_query("select count(*) as n from boards"); - $lrow=mysql_fetch_array($lr); - - if($lrow['n']>$limit){ - $preoffset=max(0,$offset-$limit); - $postoffset=$offset+$limit; - echo "<table width=\"100%\">\n<tr>\n"; - printf("<td align=left><%sa href=\"%s?submit=Browse&offset=%d&verbose=%d\"><img border=0 alt=\"<\" src=\"/icons/left.gif\"></a></td>\n", $offset>0?"":"no", $PHP_SELF, $preoffset, $verbose); - printf("<td align=right><%sa href=\"%s?submit=Browse&offset=%d&verbose=%d\"><img border=0 alt=\">\" src=\"/icons/right.gif\"></a></td>\n", $postoffset<$lrow['n']?"":"no", $PHP_SELF, $postoffset, $offset); - echo "</tr>\n</table>\n"; - } - - mysql_free_result($lr); - } -?> -<table align=center border=1 cellpadding=10> -<tr> -<th></th> -<th>serno / edit</th> -<th>ethaddr</th> -<th>date</th> -<th>batch</th> -<th>type</th> -<th>rev</th> -<th>location</th> -<?php - if ($verbose) { - echo "<th>comments</th>\n"; - echo "<th>sdram</th>\n"; - echo "<th>flash</th>\n"; - echo "<th>zbt</th>\n"; - echo "<th>xlxtyp</th>\n"; - echo "<th>xlxspd</th>\n"; - echo "<th>xlxtmp</th>\n"; - echo "<th>xlxgrd</th>\n"; - echo "<th>cputyp</th>\n"; - echo "<th>cpuspd</th>\n"; - echo "<th>cpmspd</th>\n"; - echo "<th>busspd</th>\n"; - echo "<th>hstype</th>\n"; - echo "<th>hschin</th>\n"; - echo "<th>hschout</th>\n"; - } -?> -</tr> -<?php - $query = "select * from boards"; - if ($serno != '') { - $pre = " where "; - foreach (preg_split("/[\s,]+/", $serno) as $s) { - if (preg_match('/^[0-9]+$/',$s)) - $query .= $pre . "serno=" . $s; - else if (preg_match('/^([0-9]+)-([0-9]+)$/',$s,$m)) { - $m1 = intval($m[1]); $m2 = intval($m[2]); - if ($m2 <= $m1) - die("bad serial number range ($s)"); - $query .= $pre . "(serno>=$m[1] and serno<=$m[2])"; - } - else - die("illegal serial number ($s)"); - $pre = " or "; - } - } - $query .= " order by serno"; - if ($serno == '') - $query .= " limit $offset,$limit"; - - $r = mysql_query($query); - - function print_cell($str) { - if ($str == '') - $str = ' '; - echo "\t<td>$str</td>\n"; - } - - while($row=mysql_fetch_array($r)){ - foreach ($columns as $key) { - if (!key_in_array($key, $row)) - $row[$key] = ''; - } - - echo "<tr>\n"; - print_cell("<a href=\"brlog.php?serno=$row[serno]\">Log</a>"); - print_cell("<a href=\"edit.php?serno=$row[serno]\">$row[serno]</a>"); - print_cell($row['ethaddr']); - print_cell($row['date']); - print_cell($row['batch']); - print_cell($row['type']); - print_cell($row['rev']); - print_cell($row['location']); - if ($verbose) { - print_cell("<pre>\n" . urldecode($row['comments']) . - "\n\t</pre>"); - print_cell(gather_enum_multi_print("sdram", 4, $row)); - print_cell(gather_enum_multi_print("flash", 4, $row)); - print_cell(gather_enum_multi_print("zbt", 16, $row)); - print_cell(gather_enum_multi_print("xlxtyp", 4, $row)); - print_cell(gather_enum_multi_print("xlxspd", 4, $row)); - print_cell(gather_enum_multi_print("xlxtmp", 4, $row)); - print_cell(gather_enum_multi_print("xlxgrd", 4, $row)); - print_cell($row['cputyp']); - print_cell($row['cpuspd']); - print_cell($row['cpmspd']); - print_cell($row['busspd']); - print_cell($row['hstype']); - print_cell($row['hschin']); - print_cell($row['hschout']); - } - echo "</tr>\n"; - } -?> -</table> -<p></p> -<table width="100%"> -<tr> - <td align=center><?php - printf("<a href=\"%s?submit=Browse&offset=%d&verbose=%d%s\">%s Listing</a>\n", $PHP_SELF, $offset, $verbose?0:1, $serno!=''?"&serno=$serno":'', $verbose?"Terse":"Verbose"); - ?></td> - <td align=center><a href="index.php">Back to Start</a></td> -</tr> -</table> -<?php - pg_foot(); -?> diff --git a/tools/bddb/config.php b/tools/bddb/config.php deleted file mode 100644 index 67257578f0..0000000000 --- a/tools/bddb/config.php +++ /dev/null @@ -1,16 +0,0 @@ -<?php - // (C) Copyright 2001 - // Murray Jensen <Murray.Jensen@csiro.au> - // CSIRO Manufacturing Science and Technology, Preston Lab - - // mysql database access info - $mysql_user="fred"; - $mysql_pw="apassword"; - $mysql_db="mydbname"; - - // where to put the eeprom config files - $bddb_cfgdir = '/tftpboot/bddb'; - - // what this database is called - $bddb_label = 'Hymod Board Database'; -?> diff --git a/tools/bddb/create_tables.sql b/tools/bddb/create_tables.sql deleted file mode 100644 index a2a578867f..0000000000 --- a/tools/bddb/create_tables.sql +++ /dev/null @@ -1,90 +0,0 @@ -# phpMyAdmin MySQL-Dump -# http://phpwizard.net/phpMyAdmin/ -# -# Host: localhost Database : hymod_bddb - -# (C) Copyright 2001 -# Murray Jensen <Murray.Jensen@csiro.au> -# CSIRO Manufacturing and Infrastructure Technology, Preston Lab - -# -------------------------------------------------------- -# -# Table structure for table 'boards' -# - -DROP TABLE IF EXISTS boards; -CREATE TABLE boards ( - serno int(10) unsigned zerofill NOT NULL auto_increment, - ethaddr char(17), - date date NOT NULL, - batch char(32), - type enum('IO','CLP','DSP','INPUT','ALT-INPUT','DISPLAY') NOT NULL, - rev tinyint(3) unsigned zerofill NOT NULL, - location char(64), - comments text, - sdram0 enum('32M','64M','128M','256M','512M','1G','2G','4G'), - sdram1 enum('32M','64M','128M','256M','512M','1G','2G','4G'), - sdram2 enum('32M','64M','128M','256M','512M','1G','2G','4G'), - sdram3 enum('32M','64M','128M','256M','512M','1G','2G','4G'), - flash0 enum('4M','8M','16M','32M','64M','128M','256M','512M','1G'), - flash1 enum('4M','8M','16M','32M','64M','128M','256M','512M','1G'), - flash2 enum('4M','8M','16M','32M','64M','128M','256M','512M','1G'), - flash3 enum('4M','8M','16M','32M','64M','128M','256M','512M','1G'), - zbt0 enum('512K','1M','2M','4M','8M','16M'), - zbt1 enum('512K','1M','2M','4M','8M','16M'), - zbt2 enum('512K','1M','2M','4M','8M','16M'), - zbt3 enum('512K','1M','2M','4M','8M','16M'), - zbt4 enum('512K','1M','2M','4M','8M','16M'), - zbt5 enum('512K','1M','2M','4M','8M','16M'), - zbt6 enum('512K','1M','2M','4M','8M','16M'), - zbt7 enum('512K','1M','2M','4M','8M','16M'), - zbt8 enum('512K','1M','2M','4M','8M','16M'), - zbt9 enum('512K','1M','2M','4M','8M','16M'), - zbta enum('512K','1M','2M','4M','8M','16M'), - zbtb enum('512K','1M','2M','4M','8M','16M'), - zbtc enum('512K','1M','2M','4M','8M','16M'), - zbtd enum('512K','1M','2M','4M','8M','16M'), - zbte enum('512K','1M','2M','4M','8M','16M'), - zbtf enum('512K','1M','2M','4M','8M','16M'), - xlxtyp0 enum('XCV300E','XCV400E','XCV600E','XC2V2000','XC2V3000','XC2V4000','XC2V6000','XC2VP2','XC2VP4','XC2VP7','XC2VP20','XC2VP30','XC2VP50','XC4VFX20','XC4VFX40','XC4VFX60','XC4VFX100','XC4VFX140'), - xlxtyp1 enum('XCV300E','XCV400E','XCV600E','XC2V2000','XC2V3000','XC2V4000','XC2V6000','XC2VP2','XC2VP4','XC2VP7','XC2VP20','XC2VP30','XC2VP50','XC4VFX20','XC4VFX40','XC4VFX60','XC4VFX100','XC4VFX140'), - xlxtyp2 enum('XCV300E','XCV400E','XCV600E','XC2V2000','XC2V3000','XC2V4000','XC2V6000','XC2VP2','XC2VP4','XC2VP7','XC2VP20','XC2VP30','XC2VP50','XC4VFX20','XC4VFX40','XC4VFX60','XC4VFX100','XC4VFX140'), - xlxtyp3 enum('XCV300E','XCV400E','XCV600E','XC2V2000','XC2V3000','XC2V4000','XC2V6000','XC2VP2','XC2VP4','XC2VP7','XC2VP20','XC2VP30','XC2VP50','XC4VFX20','XC4VFX40','XC4VFX60','XC4VFX100','XC4VFX140'), - xlxspd0 enum('6','7','8','4','5','9','10','11','12'), - xlxspd1 enum('6','7','8','4','5','9','10','11','12'), - xlxspd2 enum('6','7','8','4','5','9','10','11','12'), - xlxspd3 enum('6','7','8','4','5','9','10','11','12'), - xlxtmp0 enum('COM','IND'), - xlxtmp1 enum('COM','IND'), - xlxtmp2 enum('COM','IND'), - xlxtmp3 enum('COM','IND'), - xlxgrd0 enum('NORMAL','ENGSAMP'), - xlxgrd1 enum('NORMAL','ENGSAMP'), - xlxgrd2 enum('NORMAL','ENGSAMP'), - xlxgrd3 enum('NORMAL','ENGSAMP'), - cputyp enum('MPC8260(HIP3)','MPC8260A(HIP4)','MPC8280(HIP7)','MPC8560'), - cpuspd enum('33MHZ','66MHZ','100MHZ','133MHZ','166MHZ','200MHZ','233MHZ','266MHZ','300MHZ','333MHZ','366MHZ','400MHZ','433MHZ','466MHZ','500MHZ','533MHZ','566MHZ','600MHZ','633MHZ','666MHZ','700MHZ','733MHZ','766MHZ','800MHZ','833MHZ','866MHZ','900MHZ','933MHZ','966MHZ','1000MHZ','1033MHZ','1066MHZ','1100MHZ','1133MHZ','1166MHZ','1200MHZ','1233MHZ','1266MHZ','1300MHZ','1333MHZ'), - cpmspd enum('33MHZ','66MHZ','100MHZ','133MHZ','166MHZ','200MHZ','233MHZ','266MHZ','300MHZ','333MHZ','366MHZ','400MHZ','433MHZ','466MHZ','500MHZ','533MHZ','566MHZ','600MHZ','633MHZ','666MHZ','700MHZ','733MHZ','766MHZ','800MHZ','833MHZ','866MHZ','900MHZ','933MHZ','966MHZ','1000MHZ','1033MHZ','1066MHZ','1100MHZ','1133MHZ','1166MHZ','1200MHZ','1233MHZ','1266MHZ','1300MHZ','1333MHZ'), - busspd enum('33MHZ','66MHZ','100MHZ','133MHZ','166MHZ','200MHZ','233MHZ','266MHZ','300MHZ','333MHZ','366MHZ','400MHZ','433MHZ','466MHZ','500MHZ','533MHZ','566MHZ','600MHZ','633MHZ','666MHZ','700MHZ','733MHZ','766MHZ','800MHZ','833MHZ','866MHZ','900MHZ','933MHZ','966MHZ','1000MHZ','1033MHZ','1066MHZ','1100MHZ','1133MHZ','1166MHZ','1200MHZ','1233MHZ','1266MHZ','1300MHZ','1333MHZ'), - hstype enum('AMCC-S2064A','Xilinx-Rockets'), - hschin enum('0','1','2','3','4','5','6','7','8','9','10','11','12','13','14','15','16'), - hschout enum('0','1','2','3','4','5','6','7','8','9','10','11','12','13','14','15','16'), - PRIMARY KEY (serno), - KEY serno (serno), - UNIQUE serno_2 (serno) -); - -# -# Table structure for table 'log' -# - -DROP TABLE IF EXISTS log; -CREATE TABLE log ( - logno int(10) unsigned zerofill NOT NULL auto_increment, - serno int(10) unsigned zerofill NOT NULL, - date date NOT NULL, - details text NOT NULL, - PRIMARY KEY (logno), - KEY logno (logno, serno, date), - UNIQUE logno_2 (logno) -); diff --git a/tools/bddb/defs.php b/tools/bddb/defs.php deleted file mode 100644 index 0b50602823..0000000000 --- a/tools/bddb/defs.php +++ /dev/null @@ -1,710 +0,0 @@ -<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?> -<?php - // (C) Copyright 2001 - // Murray Jensen <Murray.Jensen@csiro.au> - // CSIRO Manufacturing Science and Technology, Preston Lab - - // contains mysql user id and password - keep secret - require("config.php"); - - if (isset($_REQUEST['logout'])) { - Header("status: 401 Unauthorized"); - Header("HTTP/1.0 401 Unauthorized"); - Header("WWW-authenticate: basic realm=\"$bddb_label\""); - - echo "<html><head><title>" . - "Access to '$bddb_label' Denied" . - "</title></head>\n"; - echo "<body bgcolor=#ffffff><br></br><br></br><center><h1>" . - "You must be an Authorised User " . - "to access the '$bddb_label'" . - "</h1>\n</center></body></html>\n"; - exit; - } - - // contents of the various enumerated types - if first item is - // empty ('') then the enum is allowed to be null (ie "not null" - // is not set on the column) - - // all column names in the database table - $columns = array( - 'serno','ethaddr','date','batch', - 'type','rev','location','comments', - 'sdram0','sdram1','sdram2','sdram3', - 'flash0','flash1','flash2','flash3', - 'zbt0','zbt1','zbt2','zbt3','zbt4','zbt5','zbt6','zbt7', - 'zbt8','zbt9','zbta','zbtb','zbtc','zbtd','zbte','zbtf', - 'xlxtyp0','xlxtyp1','xlxtyp2','xlxtyp3', - 'xlxspd0','xlxspd1','xlxspd2','xlxspd3', - 'xlxtmp0','xlxtmp1','xlxtmp2','xlxtmp3', - 'xlxgrd0','xlxgrd1','xlxgrd2','xlxgrd3', - 'cputyp','cpuspd','cpmspd','busspd', - 'hstype','hschin','hschout' - ); - - // board type - $type_vals = array('IO','CLP','DSP','INPUT','ALT-INPUT','DISPLAY'); - - // Xilinx fpga types - $xlxtyp_vals = array('','XCV300E','XCV400E','XCV600E','XC2V2000','XC2V3000','XC2V4000','XC2V6000','XC2VP2','XC2VP4','XC2VP7','XC2VP20','XC2VP30','XC2VP50','XC4VFX20','XC4VFX40','XC4VFX60','XC4VFX100','XC4VFX140'); - - // Xilinx fpga speeds - $xlxspd_vals = array('','6','7','8','4','5','9','10','11','12'); - - // Xilinx fpga temperatures (commercial or industrial) - $xlxtmp_vals = array('','COM','IND'); - - // Xilinx fpga grades (normal or engineering sample) - $xlxgrd_vals = array('','NORMAL','ENGSAMP'); - - // CPU types - $cputyp_vals = array('','MPC8260(HIP3)','MPC8260A(HIP4)','MPC8280(HIP7)','MPC8560'); - - // CPU/BUS/CPM clock speeds - $clk_vals = array('','33MHZ','66MHZ','100MHZ','133MHZ','166MHZ','200MHZ','233MHZ','266MHZ','300MHZ','333MHZ','366MHZ','400MHZ','433MHZ','466MHZ','500MHZ','533MHZ','566MHZ','600MHZ','633MHZ','666MHZ','700MHZ','733MHZ','766MHZ','800MHZ','833MHZ','866MHZ','900MHZ','933MHZ','966MHZ','1000MHZ','1033MHZ','1066MHZ','1100MHZ','1133MHZ','1166MHZ','1200MHZ','1233MHZ','1266MHZ','1300MHZ','1333MHZ'); - - // sdram sizes (nbits array is for eeprom config file) - $sdram_vals = array('','32M','64M','128M','256M','512M','1G','2G','4G'); - $sdram_nbits = array(0,25,26,27,28,29,30,31,32); - - // flash sizes (nbits array is for eeprom config file) - $flash_vals = array('','4M','8M','16M','32M','64M','128M','256M','512M','1G'); - $flash_nbits = array(0,22,23,24,25,26,27,28,29,30); - - // zbt ram sizes (nbits array is for write into eeprom config file) - $zbt_vals = array('','512K','1M','2M','4M','8M','16M'); - $zbt_nbits = array(0,19,20,21,22,23,24); - - // high-speed serial attributes - $hstype_vals = array('','AMCC-S2064A','Xilinx-Rockets'); - $hschin_vals = array('0','1','2','3','4','5','6','7','8','9','10','11','12','13','14','15','16'); - $hschout_vals = array('0','1','2','3','4','5','6','7','8','9','10','11','12','13','14','15','16'); - - // value filters - used when outputting html - function rev_filter($num) { - if ($num == 0) - return "001"; - else - return sprintf("%03d", $num); - } - - function text_filter($str) { - return urldecode($str); - } - - mt_srand(time() | getmypid()); - - // set up MySQL connection - mysql_connect("", $mysql_user, $mysql_pw) || die("cannot connect"); - mysql_select_db($mysql_db) || die("cannot select db"); - - // page header - function pg_head($title) - { - echo "<html>\n<head>\n"; - echo "<link rel=stylesheet href=\"bddb.css\" type=\"text/css\" title=\"style sheet\"></link>\n"; - echo "<title>$title</title>\n"; - echo "</head>\n"; - echo "<body>\n"; - echo "<center><h1>$title</h1></center>\n"; - echo "<hr></hr>\n"; - } - - // page footer - function pg_foot() - { - echo "<hr></hr>\n"; - echo "<table width=\"100%\"><tr><td align=left>\n<address>" . - "If you have any problems, email " . - "<a href=\"mailto:Murray.Jensen@csiro.au\">" . - "Murray Jensen" . - "</a></address>\n" . - "</td><td align=right>\n" . - "<a href=\"index.php?logout=true\">logout</a>\n" . - "</td></tr></table>\n"; - echo "<p><small><i>Made with " . - "<a href=\"http://kyber.dk/phpMyBuilder/\">" . - "Kyber phpMyBuilder</a></i></small></p>\n"; - echo "</body>\n"; - echo "</html>\n"; - } - - // some support functions - - if (!function_exists('array_search')) { - - function array_search($needle, $haystack, $strict = false) { - - if (is_array($haystack) && count($haystack)) { - - $ntype = gettype($needle); - - foreach ($haystack as $key => $value) { - - if ($value == $needle && (!$strict || - gettype($value) == $ntype)) - return $key; - } - } - - return false; - } - } - - if (!function_exists('in_array')) { - - function in_array($needle, $haystack, $strict = false) { - - if (is_array($haystack) && count($haystack)) { - - $ntype = gettype($needle); - - foreach ($haystack as $key => $value) { - - if ($value == $needle && (!$strict || - gettype($value) == $ntype)) - return true; - } - } - - return false; - } - } - - function key_in_array($key, $array) { - return in_array($key, array_keys($array), true); - } - - function enum_to_index($name, $vals) { - $index = array_search($GLOBALS[$name], $vals); - if ($vals[0] != '') - $index++; - return $index; - } - - // fetch a value from an array - return empty string is not present - function get_key_value($key, $array) { - if (key_in_array($key, $array)) - return $array[$key]; - else - return ''; - } - - function fprintf() { - $n = func_num_args(); - if ($n < 2) - return FALSE; - $a = func_get_args(); - $fp = array_shift($a); - $x = "\$s = sprintf"; - $sep = '('; - foreach ($a as $z) { - $x .= "$sep'$z'"; - $sep = ','; - } - $x .= ');'; - eval($x); - $l = strlen($s); - $r = fwrite($fp, $s, $l); - if ($r != $l) - return FALSE; - else - return TRUE; - } - - // functions to display (print) a database table and its columns - - function begin_table($ncols) { - global $table_ncols; - $table_ncols = $ncols; - echo "<table align=center width=\"100%\"" - . " border=1 cellpadding=4 cols=$table_ncols>\n"; - } - - function begin_field($name, $span = 0) { - global $table_ncols; - echo "<tr valign=top>\n"; - echo "\t<th align=center>$name</th>\n"; - if ($span <= 0) - $span = $table_ncols - 1; - if ($span > 1) - echo "\t<td colspan=$span>\n"; - else - echo "\t<td>\n"; - } - - function cont_field($span = 1) { - echo "\t</td>\n"; - if ($span > 1) - echo "\t<td colspan=$span>\n"; - else - echo "\t<td>\n"; - } - - function end_field() { - echo "\t</td>\n"; - echo "</tr>\n"; - } - - function end_table() { - echo "</table>\n"; - } - - function print_field($name, $array, $size = 0, $filt='') { - - begin_field($name); - - if (key_in_array($name, $array)) - $value = $array[$name]; - else - $value = ''; - - if ($filt != '') - $value = $filt($value); - - echo "\t\t<input name=$name value=\"$value\""; - if ($size > 0) - echo " size=$size maxlength=$size"; - echo "></input>\n"; - - end_field(); - } - - function print_field_multiline($name, $array, $cols, $rows, $filt='') { - - begin_field($name); - - if (key_in_array($name, $array)) - $value = $array[$name]; - else - $value = ''; - - if ($filt != '') - $value = $filt($value); - - echo "\t\t<textarea name=$name " . - "cols=$cols rows=$rows wrap=off>\n"; - echo "$value"; - echo "</textarea>\n"; - - end_field(); - } - - // print a mysql ENUM as an html RADIO INPUT - function print_enum($name, $array, $vals, $def = -1) { - - begin_field($name); - - if (key_in_array($name, $array)) - $chk = array_search($array[$name], $vals, FALSE); - else - $chk = $def; - - $nval = count($vals); - - for ($i = 0; $i < $nval; $i++) { - - $val = $vals[$i]; - if ($val == '') - $pval = "none"; - else - $pval = "$val"; - - printf("\t\t<input type=radio name=$name" - . " value=\"$val\"%s>$pval</input>\n", - $i == $chk ? " checked" : ""); - } - - end_field(); - } - - // print a mysql ENUM as an html SELECT INPUT - function print_enum_select($name, $array, $vals, $def = -1) { - - begin_field($name); - - echo "\t\t<select name=$name>\n"; - - if (key_in_array($name, $array)) - $chk = array_search($array[$name], $vals, FALSE); - else - $chk = $def; - - $nval = count($vals); - - for ($i = 0; $i < $nval; $i++) { - - $val = $vals[$i]; - if ($val == '') - $pval = "none"; - else - $pval = "$val"; - - printf("\t\t\t<option " . - "value=\"%s\"%s>%s</option>\n", - $val, $i == $chk ? " selected" : "", $pval); - } - - echo "\t\t</select>\n"; - - end_field(); - } - - // print a group of mysql ENUMs (e.g. name0,name1,...) as an html SELECT - function print_enum_multi($base, $array, $vals, $cnt, $defs, $grp = 0) { - - global $table_ncols; - - if ($grp <= 0) - $grp = $cnt; - $ncell = $cnt / $grp; - $span = ($table_ncols - 1) / $ncell; - - begin_field($base, $span); - - $nval = count($vals); - - for ($i = 0; $i < $cnt; $i++) { - - if ($i > 0 && ($i % $grp) == 0) - cont_field($span); - - $name = sprintf("%s%x", $base, $i); - - echo "\t\t<select name=$name>\n"; - - if (key_in_array($name, $array)) - $ai = array_search($array[$name], $vals, FALSE); - else { - if (key_in_array($i, $defs)) - $ai = $defs[$i]; - else - $ai = 0; - } - - for ($j = 0; $j < $nval; $j++) { - - $val = $vals[$j]; - if ($val == '') - $pval = " "; - else - $pval = "$val"; - - printf("\t\t\t<option " . - "value=\"%s\"%s>%s</option>\n", - $val, - $j == $ai ? " selected" : "", - $pval); - } - - echo "\t\t</select>\n"; - } - - end_field(); - } - - // functions to handle the form input - - // fetch all the parts of an "enum_multi" into a string suitable - // for a MySQL query - function gather_enum_multi_query($base, $cnt) { - - $retval = ''; - - for ($i = 0; $i < $cnt; $i++) { - - $name = sprintf("%s%x", $base, $i); - - if (isset($_REQUEST[$name])) { - $retval .= sprintf(", %s='%s'", - $name, $_REQUEST[$name]); - } - } - - return $retval; - } - - // fetch all the parts of an "enum_multi" into a string suitable - // for a display e.g. in an html table cell - function gather_enum_multi_print($base, $cnt, $array) { - - $retval = ''; - - for ($i = 0; $i < $cnt; $i++) { - - $name = sprintf("%s%x", $base, $i); - - if ($array[$name] != '') { - if ($retval != '') - $retval .= ','; - $retval .= $array[$name]; - } - } - - return $retval; - } - - // fetch all the parts of an "enum_multi" into a string suitable - // for writing to the eeprom data file - function gather_enum_multi_write($base, $cnt, $vals, $xfrm = array()) { - - $retval = ''; - - for ($i = 0; $i < $cnt; $i++) { - - $name = sprintf("%s%x", $base, $i); - - if ($GLOBALS[$name] != '') { - if ($retval != '') - $retval .= ','; - $index = enum_to_index($name, $vals); - if ($xfrm != array()) - $retval .= $xfrm[$index]; - else - $retval .= $index; - } - } - - return $retval; - } - - // count how many parts of an "enum_multi" are actually set - function count_enum_multi($base, $cnt) { - - $retval = 0; - - for ($i = 0; $i < $cnt; $i++) { - - $name = sprintf("%s%x", $base, $i); - - if (isset($_REQUEST[$name])) - $retval++; - } - - return $retval; - } - - // ethernet address functions - - // generate a (possibly not unique) random vendor ethernet address - // (setting bit 6 in the ethernet address - motorola wise i.e. bit 0 - // is the most significant bit - means it is not an assigned ethernet - // address - it is a "locally administered" address). Also, make sure - // it is NOT a multicast ethernet address (by setting bit 7 to 0). - // e.g. the first byte of all ethernet addresses generated here will - // have 2 in the bottom two bits (incidentally, these are the first - // two bits transmitted on the wire, since the octets in ethernet - // addresses are transmitted LSB first). - - function gen_eth_addr($serno) { - - $ethaddr_hgh = (mt_rand(0, 65535) & 0xfeff) | 0x0200; - $ethaddr_mid = mt_rand(0, 65535); - $ethaddr_low = mt_rand(0, 65535); - - return sprintf("%02lx:%02lx:%02lx:%02lx:%02lx:%02lx", - $ethaddr_hgh >> 8, $ethaddr_hgh & 0xff, - $ethaddr_mid >> 8, $ethaddr_mid & 0xff, - $ethaddr_low >> 8, $ethaddr_low & 0xff); - } - - // check that an ethernet address is valid - function eth_addr_is_valid($ethaddr) { - - $ethbytes = split(':', $ethaddr); - - if (count($ethbytes) != 6) - return FALSE; - - for ($i = 0; $i < 6; $i++) { - $ethbyte = $ethbytes[$i]; - if (!ereg('^[0-9a-f][0-9a-f]$', $ethbyte)) - return FALSE; - } - - return TRUE; - } - - // write a simple eeprom configuration file - function write_eeprom_cfg_file() { - - global $sernos, $nsernos, $bddb_cfgdir, $numerrs, $cfgerrs; - global $date, $batch, $type_vals, $rev; - global $sdram_vals, $sdram_nbits; - global $flash_vals, $flash_nbits; - global $zbt_vals, $zbt_nbits; - global $xlxtyp_vals, $xlxspd_vals, $xlxtmp_vals, $xlxgrd_vals; - global $cputyp, $cputyp_vals, $clk_vals; - global $hstype, $hstype_vals, $hschin, $hschout; - - $numerrs = 0; - $cfgerrs = array(); - - for ($i = 0; $i < $nsernos; $i++) { - - $serno = sprintf("%010d", $sernos[$i]); - - $wfp = @fopen($bddb_cfgdir . "/$serno.cfg", "w"); - if (!$wfp) { - $cfgerrs[$i] = 'file create fail'; - $numerrs++; - continue; - } - set_file_buffer($wfp, 0); - - if (!fprintf($wfp, "serno=%d\n", $sernos[$i])) { - $cfgerrs[$i] = 'cfg wr fail (serno)'; - fclose($wfp); - $numerrs++; - continue; - } - - if (!fprintf($wfp, "date=%s\n", $date)) { - $cfgerrs[$i] = 'cfg wr fail (date)'; - fclose($wfp); - $numerrs++; - continue; - } - - if ($batch != '') { - if (!fprintf($wfp, "batch=%s\n", $batch)) { - $cfgerrs[$i] = 'cfg wr fail (batch)'; - fclose($wfp); - $numerrs++; - continue; - } - } - - $typei = enum_to_index("type", $type_vals); - if (!fprintf($wfp, "type=%d\n", $typei)) { - $cfgerrs[$i] = 'cfg wr fail (type)'; - fclose($wfp); - $numerrs++; - continue; - } - - if (!fprintf($wfp, "rev=%d\n", $rev)) { - $cfgerrs[$i] = 'cfg wr fail (rev)'; - fclose($wfp); - $numerrs++; - continue; - } - - $s = gather_enum_multi_write("sdram", 4, - $sdram_vals, $sdram_nbits); - if ($s != '') { - $b = fprintf($wfp, "sdram=%s\n", $s); - if (!$b) { - $cfgerrs[$i] = 'cfg wr fail (sdram)'; - fclose($wfp); - $numerrs++; - continue; - } - } - - $s = gather_enum_multi_write("flash", 4, - $flash_vals, $flash_nbits); - if ($s != '') { - $b = fprintf($wfp, "flash=%s\n", $s); - if (!$b) { - $cfgerrs[$i] = 'cfg wr fail (flash)'; - fclose($wfp); - $numerrs++; - continue; - } - } - - $s = gather_enum_multi_write("zbt", 16, - $zbt_vals, $zbt_nbits); - if ($s != '') { - $b = fprintf($wfp, "zbt=%s\n", $s); - if (!$b) { - $cfgerrs[$i] = 'cfg wr fail (zbt)'; - fclose($wfp); - $numerrs++; - continue; - } - } - - $s = gather_enum_multi_write("xlxtyp", 4, $xlxtyp_vals); - if ($s != '') { - $b = fprintf($wfp, "xlxtyp=%s\n", $s); - if (!$b) { - $cfgerrs[$i] = 'cfg wr fail (xlxtyp)'; - fclose($wfp); - $numerrs++; - continue; - } - } - - $s = gather_enum_multi_write("xlxspd", 4, $xlxspd_vals); - if ($s != '') { - $b = fprintf($wfp, "xlxspd=%s\n", $s); - if (!$b) { - $cfgerrs[$i] = 'cfg wr fail (xlxspd)'; - fclose($wfp); - $numerrs++; - continue; - } - } - - $s = gather_enum_multi_write("xlxtmp", 4, $xlxtmp_vals); - if ($s != '') { - $b = fprintf($wfp, "xlxtmp=%s\n", $s); - if (!$b) { - $cfgerrs[$i] = 'cfg wr fail (xlxtmp)'; - fclose($wfp); - $numerrs++; - continue; - } - } - - $s = gather_enum_multi_write("xlxgrd", 4, $xlxgrd_vals); - if ($s != '') { - $b = fprintf($wfp, "xlxgrd=%s\n", $s); - if (!$b) { - $cfgerrs[$i] = 'cfg wr fail (xlxgrd)'; - fclose($wfp); - $numerrs++; - continue; - } - } - - if ($cputyp != '') { - $cputypi = enum_to_index("cputyp",$cputyp_vals); - $cpuspdi = enum_to_index("cpuspd", $clk_vals); - $busspdi = enum_to_index("busspd", $clk_vals); - $cpmspdi = enum_to_index("cpmspd", $clk_vals); - $b = fprintf($wfp, "cputyp=%d\ncpuspd=%d\n" . - "busspd=%d\ncpmspd=%d\n", - $cputypi, $cpuspdi, $busspdi, $cpmspdi); - if (!$b) { - $cfgerrs[$i] = 'cfg wr fail (cputyp)'; - fclose($wfp); - $numerrs++; - continue; - } - } - - if ($hstype != '') { - $hstypei = enum_to_index("hstype",$hstype_vals); - $b = fprintf($wfp, "hstype=%d\n" . - "hschin=%s\nhschout=%s\n", - $hstypei, $hschin, $hschout); - if (!$b) { - $cfgerrs[$i] = 'cfg wr fail (hstype)'; - fclose($wfp); - $numerrs++; - continue; - } - } - - if (!fclose($wfp)) { - $cfgerrs[$i] = 'file cls fail'; - $numerrs++; - } - } - - return $numerrs; - } -?> diff --git a/tools/bddb/dodelete.php b/tools/bddb/dodelete.php deleted file mode 100644 index 4839e36e60..0000000000 --- a/tools/bddb/dodelete.php +++ /dev/null @@ -1,65 +0,0 @@ -<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?> -<?php - // (C) Copyright 2001 - // Murray Jensen <Murray.Jensen@csiro.au> - // CSIRO Manufacturing Science and Technology, Preston Lab - - // dodelete page (hymod_bddb / boards) - - require("defs.php"); - - pg_head("$bddb_label - Delete Board Results"); - - if (!isset($_REQUEST['serno'])) - die("the board serial number was not specified"); - $serno=intval($_REQUEST['serno']); - - mysql_query("delete from boards where serno=$serno"); - - if(mysql_errno()) { - $errstr = mysql_error(); - echo "\t<font size=+4>\n"; - echo "\t\t<p>\n"; - echo "\t\t\tThe following error was encountered:\n"; - echo "\t\t</p>\n"; - echo "\t\t<center>\n"; - printf("\t\t\t<b>%s</b>\n", $errstr); - echo "\t\t</center>\n"; - echo "\t</font>\n"; - } - else { - echo "\t<font size=+2>\n"; - echo "\t\t<p>\n"; - echo "\t\t\tThe board with serial number <b>$serno</b> was" - . " successfully deleted\n"; - mysql_query("delete from log where serno=$serno"); - if (mysql_errno()) { - $errstr = mysql_error(); - echo "\t\t\t<font size=+4>\n"; - echo "\t\t\t\t<p>\n"; - echo "\t\t\t\t\tBut the following error occurred " . - "when deleting the log entries:\n"; - echo "\t\t\t\t</p>\n"; - echo "\t\t\t\t<center>\n"; - printf("\t\t\t\t\t<b>%s</b>\n", $errstr); - echo "\t\t\t\t</center>\n"; - echo "\t\t\t</font>\n"; - } - echo "\t\t</p>\n"; - echo "\t</font>\n"; - } -?> -<p> -<table width="100%"> -<tr> - <td align=center> - <a href="browse.php">Back to Browse</a> - </td> - <td align=center> - <a href="index.php">Back to Start</a> - </td> -</tr> -</table> -<?php - pg_foot(); -?> diff --git a/tools/bddb/dodellog.php b/tools/bddb/dodellog.php deleted file mode 100644 index 9dd78c11b6..0000000000 --- a/tools/bddb/dodellog.php +++ /dev/null @@ -1,57 +0,0 @@ -<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?> -<?php - // (C) Copyright 2001 - // Murray Jensen <Murray.Jensen@csiro.au> - // CSIRO Manufacturing Science and Technology, Preston Lab - - // dodelete page (hymod_bddb / boards) - - require("defs.php"); - - pg_head("$bddb_label - Delete Log Entry Results"); - - if (!isset($_REQUEST['serno'])) - die("the board serial number was not specified"); - $serno=intval($_REQUEST['serno']); - - if (!isset($_REQUEST['logno']) || $_REQUEST['logno'] == 0) - die("the log entry number not specified!"); - $logno=$_REQUEST['logno']; - - mysql_query("delete from log where serno=$serno and logno=$logno"); - - if(mysql_errno()) { - $errstr = mysql_error(); - echo "\t<font size=+4>\n"; - echo "\t\t<p>\n"; - echo "\t\t\tThe following error was encountered:\n"; - echo "\t\t</p>\n"; - echo "\t\t<center>\n"; - printf("\t\t\t<b>%s</b>\n", $errstr); - echo "\t\t</center>\n"; - echo "\t</font>\n"; - } - else { - echo "\t<font size=+2>\n"; - echo "\t\t<p>\n"; - echo "\t\t\tThe log entry with log number <b>$logno</b>\n"; - echo "\t\t\tand serial number <b>$serno</b> "; - echo "was successfully deleted\n"; - echo "\t\t</p>\n"; - echo "\t</font>\n"; - } -?> -<p> -<table width="100%"> -<tr> - <td align=center> - <a href="brlog.php?serno=<?php echo "$serno"; ?>">Back to Log</a> - </td> - <td align=center> - <a href="index.php">Back to Start</a> - </td> -</tr> -</table> -<?php - pg_foot(); -?> diff --git a/tools/bddb/doedit.php b/tools/bddb/doedit.php deleted file mode 100644 index 13fbb69479..0000000000 --- a/tools/bddb/doedit.php +++ /dev/null @@ -1,186 +0,0 @@ -<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?> -<?php - // (C) Copyright 2001 - // Murray Jensen <Murray.Jensen@csiro.au> - // CSIRO Manufacturing Science and Technology, Preston Lab - - // doedit page (hymod_bddb / boards) - - require("defs.php"); - - pg_head("$bddb_label - Edit Board Results"); - - if (!isset($_REQUEST['serno']) || $_REQUEST['serno'] == '') - die("the board serial number was not specified"); - $serno=intval($_REQUEST['serno']); - - $query="update boards set"; - - if (isset($_REQUEST['ethaddr'])) { - $ethaddr=$_REQUEST['ethaddr']; - if (!eth_addr_is_valid($ethaddr)) - die("ethaddr is invalid ('$ethaddr')"); - $query.=" ethaddr='$ethaddr',"; - } - - if (isset($_REQUEST['date'])) { - $date=$_REQUEST['date']; - list($y, $m, $d) = split("-", $date); - if (!checkdate($m, $d, $y) || $y < 1999) - die("date is invalid (input '$date', " . - "yyyy-mm-dd '$y-$m-$d')"); - $query.=" date='$date'"; - } - - if (isset($_REQUEST['batch'])) { - $batch=$_REQUEST['batch']; - if (strlen($batch) > 32) - die("batch field too long (>32)"); - $query.=", batch='$batch'"; - } - - if (isset($_REQUEST['type'])) { - $type=$_REQUEST['type']; - if (!in_array($type, $type_vals)) - die("Invalid type ($type) specified"); - $query.=", type='$type'"; - } - - if (isset($_REQUEST['rev'])) { - $rev=$_REQUEST['rev']; - if (($rev = intval($rev)) <= 0 || $rev > 255) - die("Revision number is invalid ($rev)"); - $query.=sprintf(", rev=%d", $rev); - } - - if (isset($_REQUEST['location'])) { - $location=$_REQUEST['location']; - if (strlen($location) > 64) - die("location field too long (>64)"); - $query.=", location='$location'"; - } - - if (isset($_REQUEST['comments'])) - $comments=$_REQUEST['comments']; - $query.=", comments='" . rawurlencode($comments) . "'"; - - $query.=gather_enum_multi_query("sdram", 4); - - $query.=gather_enum_multi_query("flash", 4); - - $query.=gather_enum_multi_query("zbt", 16); - - $query.=gather_enum_multi_query("xlxtyp", 4); - $nxlx = count_enum_multi("xlxtyp", 4); - - $query.=gather_enum_multi_query("xlxspd", 4); - if (count_enum_multi("xlxspd", 4) != $nxlx) - die("number of xilinx speeds not same as number of types"); - - $query.=gather_enum_multi_query("xlxtmp", 4); - if (count_enum_multi("xlxtmp", 4) != $nxlx) - die("number of xilinx temps. not same as number of types"); - - $query.=gather_enum_multi_query("xlxgrd", 4); - if (count_enum_multi("xlxgrd", 4) != $nxlx) - die("number of xilinx grades not same as number of types"); - - if (isset($_REQUEST['cputyp'])) { - $cputyp=$_REQUEST['cputyp']; - $query.=", cputyp='$cputyp'"; - if (!isset($_REQUEST['cpuspd']) || $_REQUEST['cpuspd'] == '') - die("must specify cpu speed if cpu type is defined"); - $cpuspd=$_REQUEST['cpuspd']; - $query.=", cpuspd='$cpuspd'"; - if (!isset($_REQUEST['cpmspd']) || $_REQUEST['cpmspd'] == '') - die("must specify cpm speed if cpu type is defined"); - $cpmspd=$_REQUEST['cpmspd']; - $query.=", cpmspd='$cpmspd'"; - if (!isset($_REQUEST['busspd']) || $_REQUEST['busspd'] == '') - die("must specify bus speed if cpu type is defined"); - $busspd=$_REQUEST['busspd']; - $query.=", busspd='$busspd'"; - } - else { - if (isset($_REQUEST['cpuspd'])) - die("can't specify cpu speed if there is no cpu"); - if (isset($_REQUEST['cpmspd'])) - die("can't specify cpm speed if there is no cpu"); - if (isset($_REQUEST['busspd'])) - die("can't specify bus speed if there is no cpu"); - } - - if (isset($_REQUEST['hschin'])) { - $hschin=$_REQUEST['hschin']; - if (($hschin = intval($hschin)) < 0 || $hschin > 4) - die("Invalid number of hs input chans ($hschin)"); - } - else - $hschin = 0; - if (isset($_REQUEST['hschout'])) { - $hschout=$_REQUEST['hschout']; - if (($hschout = intval($hschout)) < 0 || $hschout > 4) - die("Invalid number of hs output chans ($hschout)"); - } - else - $hschout = 0; - if (isset($_REQUEST['hstype'])) { - $hstype=$_REQUEST['hstype']; - $query.=", hstype='$hstype'"; - } - else { - if ($_REQUEST['hschin'] != 0) - die("number of high-speed input channels must be zero" - . " if high-speed chip is not present"); - if ($_REQUEST['hschout'] != 0) - die("number of high-speed output channels must be zero" - . " if high-speed chip is not present"); - } - $query.=", hschin='$hschin'"; - $query.=", hschout='$hschout'"; - - $query.=" where serno=$serno"; - - mysql_query($query); - if(mysql_errno()) { - $errstr = mysql_error(); - echo "\t<font size=+4>\n"; - echo "\t\t<p>\n"; - echo "\t\t\tThe following error was encountered:\n"; - echo "\t\t</p>\n"; - echo "\t\t<center>\n"; - printf("\t\t\t<b>%s</b>\n", $errstr); - echo "\t\t</center>\n"; - echo "\t</font>\n"; - } - else { - $sernos = array($serno); - $nsernos = 1; - - write_eeprom_cfg_file(); - - echo "\t<font size=+2>\n"; - echo "\t\t<p>\n"; - echo "\t\t\tThe board with serial number <b>$serno</b> was" - . " successfully updated"; - if ($numerrs > 0) { - $errstr = $cfgerrs[0]; - echo "<br>\n\t\t\t"; - echo "(but the cfg file update failed: $errstr)"; - } - echo "\n"; - echo "\t\t</p>\n"; - echo "\t</font>\n"; - } - -?> -<p> -<table align=center width="100%"> -<tr> - <td align=center><a href="browse.php">Back to Browse</a></td> - <td align=center><a href="index.php">Back to Start</a></td> -</tr> -</table> -<?php - pg_foot(); -?> diff --git a/tools/bddb/doedlog.php b/tools/bddb/doedlog.php deleted file mode 100644 index 7009aa7dad..0000000000 --- a/tools/bddb/doedlog.php +++ /dev/null @@ -1,76 +0,0 @@ -<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?> -<?php - // (C) Copyright 2001 - // Murray Jensen <Murray.Jensen@csiro.au> - // CSIRO Manufacturing Science and Technology, Preston Lab - - // doedit page (hymod_bddb / boards) - - require("defs.php"); - - pg_head("$bddb_label - Edit Log Entry Results"); - - if (!isset($_REQUEST['serno']) || $_REQUEST['serno'] == '') - die("the board serial number was not specified"); - $serno=intval($_REQUEST['serno']); - - if (!isset($_REQUEST['logno']) || $_REQUEST['logno'] == '') - die("log number not specified!"); - $logno=intval($_REQUEST['logno']); - - $query="update log set"; - - if (isset($_REQUEST['date'])) { - $date=$_REQUEST['date']; - list($y, $m, $d) = split("-", $date); - if (!checkdate($m, $d, $y) || $y < 1999) - die("date is invalid (input '$date', " . - "yyyy-mm-dd '$y-$m-$d')"); - $query.=" date='$date'"; - } - - if (isset($_REQUEST['who'])) { - $who=$_REQUEST['who']; - $query.=", who='" . $who . "'"; - } - - if (isset($_REQUEST['details'])) { - $details=$_REQUEST['details']; - $query.=", details='" . rawurlencode($details) . "'"; - } - - $query.=" where serno=$serno and logno=$logno"; - - mysql_query($query); - if(mysql_errno()) { - $errstr = mysql_error(); - echo "\t<font size=+4>\n"; - echo "\t\t<p>\n"; - echo "\t\t\tThe following error was encountered:\n"; - echo "\t\t</p>\n"; - echo "\t\t<center>\n"; - printf("\t\t\t<b>%s</b>\n", $errstr); - echo "\t\t</center>\n"; - echo "\t</font>\n"; - } - else { - echo "\t<font size=+2>\n"; - echo "\t\t<p>\n"; - echo "\t\t\tThe log entry with log number <b>$logno</b> and\n"; - echo "\t\t\tserial number <b>$serno</b> "; - echo "was successfully updated\n"; - echo "\t\t</p>\n"; - echo "\t</font>\n"; - } - -?> -<p> -<table align=center width="100%"> -<tr> - <td align=center><a href="brlog.php?serno=<?php echo "$serno"; ?>">Back to Log</a></td> - <td align=center><a href="index.php">Back to Start</a></td> -</tr> -</table> -<?php - pg_foot(); -?> diff --git a/tools/bddb/donew.php b/tools/bddb/donew.php deleted file mode 100644 index 39b2c78fca..0000000000 --- a/tools/bddb/donew.php +++ /dev/null @@ -1,230 +0,0 @@ -<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?> -<?php - // (C) Copyright 2001 - // Murray Jensen <Murray.Jensen@csiro.au> - // CSIRO Manufacturing Science and Technology, Preston Lab - - // doedit page (hymod_bddb / boards) - - require("defs.php"); - - pg_head("$bddb_label - Board Registration Results"); - - if (isset($_REQUEST['serno'])) { - $serno=$_REQUEST['serno']; - die("serial number must not be set ($serno) when Creating!"); - } - - $query="update boards set"; - - list($y, $m, $d) = split("-", $date); - if (!checkdate($m, $d, $y) || $y < 1999) - die("date is invalid (input '$date', yyyy-mm-dd '$y-$m-$d')"); - $query.=" date='$date'"; - - if ($batch != '') { - if (strlen($batch) > 32) - die("batch field too long (>32)"); - $query.=", batch='$batch'"; - } - - if (!in_array($type, $type_vals)) - die("Invalid type ($type) specified"); - $query.=", type='$type'"; - - if (($rev = intval($rev)) <= 0 || $rev > 255) - die("Revision number is invalid ($rev)"); - $query.=sprintf(", rev=%d", $rev); - - $query.=gather_enum_multi_query("sdram", 4); - - $query.=gather_enum_multi_query("flash", 4); - - $query.=gather_enum_multi_query("zbt", 16); - - $query.=gather_enum_multi_query("xlxtyp", 4); - $nxlx = count_enum_multi("xlxtyp", 4); - - $query.=gather_enum_multi_query("xlxspd", 4); - if (count_enum_multi("xlxspd", 4) != $nxlx) - die("number of xilinx speeds not same as number of types"); - - $query.=gather_enum_multi_query("xlxtmp", 4); - if (count_enum_multi("xlxtmp", 4) != $nxlx) - die("number of xilinx temps. not same as number of types"); - - $query.=gather_enum_multi_query("xlxgrd", 4); - if (count_enum_multi("xlxgrd", 4) != $nxlx) - die("number of xilinx grades not same as number of types"); - - if ($cputyp == '') { - if ($cpuspd != '') - die("can't specify cpu speed if there is no cpu"); - if ($cpmspd != '') - die("can't specify cpm speed if there is no cpu"); - if ($busspd != '') - die("can't specify bus speed if there is no cpu"); - } - else { - $query.=", cputyp='$cputyp'"; - if ($cpuspd == '') - die("must specify cpu speed if cpu type is defined"); - $query.=", cpuspd='$cpuspd'"; - if ($cpmspd == '') - die("must specify cpm speed if cpu type is defined"); - $query.=", cpmspd='$cpmspd'"; - if ($busspd == '') - die("must specify bus speed if cpu type is defined"); - $query.=", busspd='$busspd'"; - } - - if (($hschin = intval($hschin)) < 0 || $hschin > 4) - die("Invalid number of hs input chans ($hschin)"); - if (($hschout = intval($hschout)) < 0 || $hschout > 4) - die("Invalid number of hs output chans ($hschout)"); - if ($hstype == '') { - if ($hschin != 0) - die("number of high-speed input channels must be zero" - . " if high-speed chip is not present"); - if ($hschout != 0) - die("number of high-speed output channels must be zero" - . " if high-speed chip is not present"); - } - else - $query.=", hstype='$hstype'"; - $query.=", hschin='$hschin'"; - $query.=", hschout='$hschout'"; - - // echo "final query = '$query'<br>\n"; - - $quant = intval($quant); - if ($quant <= 0) $quant = 1; - - $sernos = array(); - if ($geneths) - $ethaddrs = array(); - - $sqlerr = ''; - - while ($quant-- > 0) { - - mysql_query("insert into boards (serno) values (null)"); - if (mysql_errno()) { - $sqlerr = mysql_error(); - break; - } - - $serno = mysql_insert_id(); - if (!$serno) { - $sqlerr = "couldn't allocate new serial number"; - break; - } - - mysql_query($query . " where serno=$serno"); - if (mysql_errno()) { - $sqlerr = mysql_error(); - break; - } - - array_push($sernos, $serno); - - if ($geneths) { - - $ethaddr = gen_eth_addr($serno); - - mysql_query("update boards set ethaddr='$ethaddr'" . - " where serno=$serno"); - if (mysql_errno()) { - $sqlerr = mysql_error(); - - array_push($ethaddrs, - "<font color=#ff0000><b>" . - "db save fail" . - "</b></font>"); - break; - } - - array_push($ethaddrs, $ethaddr); - } - } - - $nsernos = count($sernos); - - if ($nsernos > 0) { - - write_eeprom_cfg_file(); - - echo "<font size=+2>\n"; - echo "\t<p>\n"; - echo "\t\tThe following board serial numbers were" - . " successfully allocated"; - if ($numerrs > 0) - echo " (but with $numerrs cfg file error" . - ($numerrs > 1 ? "s" : "") . ")"; - echo ":\n"; - echo "\t</p>\n"; - - echo "</font>\n"; - - echo "<table align=center width=\"100%\">\n"; - echo "<tr>\n"; - echo "\t<th>Serial Number</th>\n"; - if ($numerrs > 0) - echo "\t<th>Cfg File Errs</th>\n"; - if ($geneths) - echo "\t<th>Ethernet Address</th>\n"; - echo "</tr>\n"; - - for ($i = 0; $i < $nsernos; $i++) { - - $serno = sprintf("%010d", $sernos[$i]); - - echo "<tr>\n"; - - echo "\t<td align=center><font size=+2>" . - "<b>$serno</b></font></td>\n"; - - if ($numerrs > 0) { - if (($errstr = $cfgerrs[$i]) == '') - $errstr = ' '; - echo "\t<td align=center>" . - "<font size=+2 color=#ff0000><b>" . - $errstr . - "</b></font></td>\n"; - } - - if ($geneths) { - echo "\t<td align=center>" . - "<font size=+2 color=#00ff00><b>" . - $ethaddrs[$i] . - "</b></font></td>\n"; - } - - echo "</tr>\n"; - } - - echo "</table>\n"; - } - - if ($sqlerr != '') { - echo "\t<font size=+4>\n"; - echo "\t\t<p>\n"; - echo "\t\t\tThe following SQL error was encountered:\n"; - echo "\t\t</p>\n"; - echo "\t\t<center>\n"; - printf("\t\t\t<b>%s</b>\n", $sqlerr); - echo "\t\t</center>\n"; - echo "\t</font>\n"; - } - -?> -<p> -<table align=center width="100%"> -<tr> - <td align=center><a href="browse.php">Go to Browse</a></td> - <td align=center><a href="index.php">Back to Start</a></td> -</tr> -</table> -<?php - pg_foot(); -?> diff --git a/tools/bddb/donewlog.php b/tools/bddb/donewlog.php deleted file mode 100644 index 7635d2992d..0000000000 --- a/tools/bddb/donewlog.php +++ /dev/null @@ -1,86 +0,0 @@ -<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?> -<?php - // (C) Copyright 2001 - // Murray Jensen <Murray.Jensen@csiro.au> - // CSIRO Manufacturing Science and Technology, Preston Lab - - // doedit page (hymod_bddb / boards) - - require("defs.php"); - - pg_head("$bddb_label - Add Log Entry Results"); - - if (!isset($_REQUEST['serno']) || $_REQUEST['serno'] == '') - die("serial number not specified!"); - $serno=intval($_REQUEST['serno']); - - if (isset($_REQUEST['logno'])) { - $logno=$_REQUEST['logno']; - die("log number must not be set ($logno) when Creating!"); - } - - $query="update log set serno=$serno"; - - list($y, $m, $d) = split("-", $date); - if (!checkdate($m, $d, $y) || $y < 1999) - die("date is invalid (input '$date', yyyy-mm-dd '$y-$m-$d')"); - $query.=", date='$date'"; - - if (isset($_REQUEST['who'])) { - $who=$_REQUEST['who']; - $query.=", who='" . $who . "'"; - } - - if (isset($_REQUEST['details'])) { - $details=$_REQUEST['details']; - $query.=", details='" . rawurlencode($details) . "'"; - } - - // echo "final query = '$query'<br>\n"; - - $sqlerr = ''; - - mysql_query("insert into log (logno) values (null)"); - if (mysql_errno()) - $sqlerr = mysql_error(); - else { - $logno = mysql_insert_id(); - if (!$logno) - $sqlerr = "couldn't allocate new serial number"; - else { - mysql_query($query . " where logno=$logno"); - if (mysql_errno()) - $sqlerr = mysql_error(); - } - } - - if ($sqlerr == '') { - echo "<font size=+2>\n"; - echo "\t<p>\n"; - echo "\t\tA log entry with log number '$logno' was " . - "added to the board with serial number '$serno'\n"; - echo "\t</p>\n"; - echo "</font>\n"; - } - else { - echo "\t<font size=+4>\n"; - echo "\t\t<p>\n"; - echo "\t\t\tThe following SQL error was encountered:\n"; - echo "\t\t</p>\n"; - echo "\t\t<center>\n"; - printf("\t\t\t<b>%s</b>\n", $sqlerr); - echo "\t\t</center>\n"; - echo "\t</font>\n"; - } - -?> -<p></p> -<table width="100%"> -<tr> - <td align=center><a href="brlog.php?serno=<?php echo "$serno"; ?>">Go to Browse</a></td> - <td align=center><a href="index.php">Back to Start</a></td> -</tr> -</table> -<?php - pg_foot(); -?> diff --git a/tools/bddb/edit.php b/tools/bddb/edit.php deleted file mode 100644 index dd8c26c5cd..0000000000 --- a/tools/bddb/edit.php +++ /dev/null @@ -1,131 +0,0 @@ -<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?> -<?php - // (C) Copyright 2001 - // Murray Jensen <Murray.Jensen@csiro.au> - // CSIRO Manufacturing Science and Technology, Preston Lab - - // edit page (hymod_bddb / boards) - - require("defs.php"); - - pg_head("$bddb_label - Edit Board Registration"); - - if ($serno == 0) - die("serial number not specified or invalid!"); - - $pserno = sprintf("%010d", $serno); - - echo "<center><b><font size=+2>"; - echo "Board Serial Number: $pserno"; - echo "</font></b></center>\n"; - -?> -<p> -<form action=doedit.php method=POST> -<?php - echo "<input type=hidden name=serno value=$serno>\n"; - - $r=mysql_query("select * from boards where serno=$serno"); - $row=mysql_fetch_array($r); - if(!$row) die("no record of serial number '$serno' in database"); - - begin_table(5); - - // ethaddr char(17) - print_field("ethaddr", $row, 17); - - // date date - print_field("date", $row); - - // batch char(32) - print_field("batch", $row, 32); - - // type enum('IO','CLP','DSP','INPUT','ALT-INPUT','DISPLAY') - print_enum("type", $row, $type_vals); - - // rev tinyint(3) unsigned zerofill - print_field("rev", $row, 3, 'rev_filter'); - - // location char(64) - print_field("location", $row, 64); - - // comments text - print_field_multiline("comments", $row, 60, 10, 'text_filter'); - - // sdram[0-3] enum('32M','64M','128M','256M') - print_enum_multi("sdram", $row, $sdram_vals, 4, array()); - - // flash[0-3] enum('4M','8M','16M','32M','64M') - print_enum_multi("flash", $row, $flash_vals, 4, array()); - - // zbt[0-f] enum('512K','1M','2M','4M') - print_enum_multi("zbt", $row, $zbt_vals, 16, array()); - - // xlxtyp[0-3] enum('XCV300E','XCV400E','XCV600E') - print_enum_multi("xlxtyp", $row, $xlxtyp_vals, 4, array(), 1); - - // xlxspd[0-3] enum('6','7','8') - print_enum_multi("xlxspd", $row, $xlxspd_vals, 4, array(), 1); - - // xlxtmp[0-3] enum('COM','IND') - print_enum_multi("xlxtmp", $row, $xlxtmp_vals, 4, array(), 1); - - // xlxgrd[0-3] enum('NORMAL','ENGSAMP') - print_enum_multi("xlxgrd", $row, $xlxgrd_vals, 4, array(), 1); - - // cputyp enum('MPC8260(HIP3)','MPC8260A(HIP4)','MPC8280(HIP7)') - print_enum("cputyp", $row, $cputyp_vals); - - // cpuspd enum('33MHZ','66MHZ','100MHZ','133MHZ','166MHZ','200MHZ','233MHZ','266MHZ') - print_enum_select("cpuspd", $row, $clk_vals); - - // cpmspd enum('33MHZ','66MHZ','100MHZ','133MHZ','166MHZ','200MHZ','233MHZ','266MHZ') - print_enum_select("cpmspd", $row, $clk_vals); - - // busspd enum('33MHZ','66MHZ','100MHZ','133MHZ','166MHZ','200MHZ','233MHZ','266MHZ') - print_enum_select("busspd", $row, $clk_vals); - - // hstype enum('AMCC-S2064A') - print_enum("hstype", $row, $hstype_vals); - - // hschin enum('0','1','2','3','4') - print_enum("hschin", $row, $hschin_vals); - - // hschout enum('0','1','2','3','4') - print_enum("hschout", $row, $hschout_vals); - - end_table(); - - echo "<p>\n"; - echo "<center><b>"; - echo "<font color=#ff0000>WARNING: NO UNDO ON DELETE!</font>"; - echo "<br></br>\n"; - echo "<tt>[ <a href=\"dodelete.php?serno=$serno\">delete</a> ]</tt>"; - echo "</b></center>\n"; - echo "</p>\n"; -?> -<p> -<table align=center width="100%"> -<tr> - <td align=center> - <input type=submit value=Edit> - </td> - <td> - - </td> - <td align=center> - <input type=reset value=Reset> - </td> - <td> - - </td> - <td align=center> - <a href="index.php">Back to Start</a> - </td> -</tr> -</table> -</p> -</form> -<?php - pg_foot(); -?> diff --git a/tools/bddb/edlog.php b/tools/bddb/edlog.php deleted file mode 100644 index 8befd35b92..0000000000 --- a/tools/bddb/edlog.php +++ /dev/null @@ -1,86 +0,0 @@ -<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?> -<?php - // (C) Copyright 2001 - // Murray Jensen <Murray.Jensen@csiro.au> - // CSIRO Manufacturing Science and Technology, Preston Lab - - // edit page (hymod_bddb / boards) - - require("defs.php"); - - pg_head("$bddb_label - Edit Board Log Entry"); - - if (!isset($_REQUEST['serno']) || $_REQUEST['serno'] == '') - die("serial number not specified!"); - $serno=intval($_REQUEST['serno']); - - if (!isset($_REQUEST['logno']) || $_REQUEST['logno'] == '') - die("log number not specified!"); - $logno=intval($_REQUEST['logno']); - - $pserno = sprintf("%010d", $serno); - $plogno = sprintf("%010d", $logno); - - echo "<center><b><font size=+2>"; - echo "Board Serial Number: $pserno, Log Number: $plogno"; - echo "</font></b></center>\n"; - -?> -<p> -<form action=doedlog.php method=POST> -<?php - echo "<input type=hidden name=serno value=$serno>\n"; - echo "<input type=hidden name=logno value=$logno>\n"; - - $r=mysql_query("select * from log where serno=$serno and logno=$logno"); - $row=mysql_fetch_array($r); - if(!$row) - die("no record of log entry with serial number '$serno' " . - "and log number '$logno' in database"); - - begin_table(3); - - // date date - print_field("date", $row); - - // who char(20) - print_field("who", $row); - - // details text - print_field_multiline("details", $row, 60, 10, 'text_filter'); - - end_table(); - - echo "<p>\n"; - echo "<center><b>"; - echo "<font color=#ff0000>WARNING: NO UNDO ON DELETE!</font>"; - echo "<br></br>\n"; - echo "<tt>[ <a href=\"dodellog.php?serno=$serno&logno=$logno\">delete</a> ]</tt>"; - echo "</b></center>\n"; - echo "</p>\n"; -?> -<p> -<table align=center width="100%"> -<tr> - <td align=center> - <input type=submit value=Edit> - </td> - <td> - - </td> - <td align=center> - <input type=reset value=Reset> - </td> - <td> - - </td> - <td align=center> - <a href="index.php">Back to Start</a> - </td> -</tr> -</table> -</p> -</form> -<?php - pg_foot(); -?> diff --git a/tools/bddb/execute.php b/tools/bddb/execute.php deleted file mode 100644 index 0b62882d75..0000000000 --- a/tools/bddb/execute.php +++ /dev/null @@ -1,33 +0,0 @@ -<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?> -<?php - // (C) Copyright 2001 - // Murray Jensen <Murray.Jensen@csiro.au> - // CSIRO Manufacturing Science and Technology, Preston Lab - - $serno=isset($_REQUEST['serno'])?$_REQUEST['serno']:''; - - $submit=isset($_REQUEST['submit'])?$_REQUEST['submit']:"[NOT SET]"; - - switch ($submit) { - - case "New": - require("new.php"); - break; - - case "Edit": - require("edit.php"); - break; - - case "Browse": - require("browse.php"); - break; - - case "Log": - require("brlog.php"); - break; - - default: - require("badsubmit.php"); - break; - } -?> diff --git a/tools/bddb/index.php b/tools/bddb/index.php deleted file mode 100644 index 842aed55fb..0000000000 --- a/tools/bddb/index.php +++ /dev/null @@ -1,38 +0,0 @@ -<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?> -<?php - // (C) Copyright 2001 - // Murray Jensen <Murray.Jensen@csiro.au> - // CSIRO Manufacturing Science and Technology, Preston Lab - - require("defs.php"); - pg_head("$bddb_label"); -?> -<font size="+4"> - <form action=execute.php method=POST> - <table width="100%" cellspacing=10 cellpadding=10> - <tr> - <td align=center> - <input type=submit name=submit value="New"></input> - </td> - <td align=center> - <input type=submit name=submit value="Edit"></input> - </td> - <td align=center> - <input type=submit name=submit value="Browse"></input> - </td> - <td align=center> - <input type=submit name=submit value="Log"></input> - </td> - </tr> - <tr> - <td align=center colspan=4> - <b>Serial Number:</b> - <input type=text name=serno size=10 maxsize=10 value=""></input> - </td> - </tr> - </table> - </form> -</font> -<?php - pg_foot(); -?> diff --git a/tools/bddb/new.php b/tools/bddb/new.php deleted file mode 100644 index 30323ff819..0000000000 --- a/tools/bddb/new.php +++ /dev/null @@ -1,120 +0,0 @@ -<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?> -<?php - // (C) Copyright 2001 - // Murray Jensen <Murray.Jensen@csiro.au> - // CSIRO Manufacturing Science and Technology, Preston Lab - - // edit page (hymod_bddb / boards) - - require("defs.php"); - - pg_head("$bddb_label - New Board Registration"); -?> -<form action=donew.php method=POST> -<p></p> -<?php - $serno=intval($serno); - // if a serial number was supplied, fetch the record - // and use its contents as defaults - if ($serno != 0) { - $r=mysql_query("select * from boards where serno=$serno"); - $row=mysql_fetch_array($r); - if(!$row)die("no record of serial number '$serno' in database"); - } - else - $row = array(); - - begin_table(5); - - // date date - print_field("date", array('date' => date("Y-m-d"))); - - // batch char(32) - print_field("batch", $row, 32); - - // type enum('IO','CLP','DSP','INPUT','ALT-INPUT','DISPLAY') - print_enum("type", $row, $type_vals, 0); - - // rev tinyint(3) unsigned zerofill - print_field("rev", $row, 3, 'rev_filter'); - - // sdram[0-3] enum('32M','64M','128M','256M') - print_enum_multi("sdram", $row, $sdram_vals, 4, array(2)); - - // flash[0-3] enum('4M','8M','16M','32M','64M') - print_enum_multi("flash", $row, $flash_vals, 4, array(2)); - - // zbt[0-f] enum('512K','1M','2M','4M') - print_enum_multi("zbt", $row, $zbt_vals, 16, array(2, 2)); - - // xlxtyp[0-3] enum('XCV300E','XCV400E','XCV600E') - print_enum_multi("xlxtyp", $row, $xlxtyp_vals, 4, array(1), 1); - - // xlxspd[0-3] enum('6','7','8') - print_enum_multi("xlxspd", $row, $xlxspd_vals, 4, array(1), 1); - - // xlxtmp[0-3] enum('COM','IND') - print_enum_multi("xlxtmp", $row, $xlxtmp_vals, 4, array(1), 1); - - // xlxgrd[0-3] enum('NORMAL','ENGSAMP') - print_enum_multi("xlxgrd", $row, $xlxgrd_vals, 4, array(1), 1); - - // cputyp enum('MPC8260(HIP3)','MPC8260A(HIP4)','MPC8280(HIP7)') - print_enum("cputyp", $row, $cputyp_vals, 1); - - // cpuspd enum('33MHZ','66MHZ','100MHZ','133MHZ','166MHZ','200MHZ','233MHZ','266MHZ') - print_enum_select("cpuspd", $row, $clk_vals, 4); - - // cpmspd enum('33MHZ','66MHZ','100MHZ','133MHZ','166MHZ','200MHZ','233MHZ','266MHZ') - print_enum_select("cpmspd", $row, $clk_vals, 4); - - // busspd enum('33MHZ','66MHZ','100MHZ','133MHZ','166MHZ','200MHZ','233MHZ','266MHZ') - print_enum_select("busspd", $row, $clk_vals, 2); - - // hstype enum('AMCC-S2064A') - print_enum("hstype", $row, $hstype_vals, 1); - - // hschin enum('0','1','2','3','4') - print_enum("hschin", $row, $hschin_vals, 4); - - // hschout enum('0','1','2','3','4') - print_enum("hschout", $row, $hschout_vals, 4); - - end_table(); -?> -<p></p> -<table width="100%"> -<tr> - <td align=center colspan=3> - Allocate - <input type=text name=quant size=2 maxlength=2 value=" 1"> - board serial number(s) - </td> -</tr> -<tr> - <td align=center colspan=3> - <input type=checkbox name=geneths checked> - Generate Ethernet Address(es) - </td> -</tr> -<tr> - <td colspan=3> - - </td> -</tr> -<tr> - <td align=center> - <input type=submit value="Register Board"> - </td> - <td> - - </td> - <td align=center> - <input type=reset value="Reset Form Contents"> - </td> -</tr> -</table> -</form> -<?php - pg_foot(); -?> diff --git a/tools/bddb/newlog.php b/tools/bddb/newlog.php deleted file mode 100644 index 609bb855c5..0000000000 --- a/tools/bddb/newlog.php +++ /dev/null @@ -1,54 +0,0 @@ -<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?> -<?php - // (C) Copyright 2001 - // Murray Jensen <Murray.Jensen@csiro.au> - // CSIRO Manufacturing Science and Technology, Preston Lab - - // edit page (hymod_bddb / boards) - - require("defs.php"); - - pg_head("$bddb_label - New Log Entry"); - - if (!isset($_REQUEST['serno']) || $_REQUEST['serno'] == '') - die("serial number not specified or invalid!"); - $serno=intval($_REQUEST['serno']); - - if (isset($_REQUEST['logno'])) { - $logno=$_REQUEST['logno']; - die("log number must not be specified when adding! ($logno)"); - } -?> -<form action=donewlog.php method=POST> -<p></p> -<?php - echo "<input type=hidden name=serno value=$serno>\n"; - - begin_table(3); - - // date date - print_field("date", array('date' => date("Y-m-d"))); - - // who char(20) - print_field("who", array()); - - // details text - print_field_multiline("details", array(), 60, 10, 'text_filter'); - - end_table(); -?> -<p></p> -<table width="100%"> -<tr> - <td align=center> - <input type=submit value="Add Log Entry"> - </td> - <td align=center> - <input type=reset value="Reset Form Contents"> - </td> -</tr> -</table> -</form> -<?php - pg_foot(); -?> |
