Merge branch 'wd'

248 files changed, 24170 insertions, 6616 deletions

diff --git a/CHANGELOG b/CHANGELOG
index dda7676d74..e39b1e7510 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,314 @@
 Changes since U-Boot 1.1.4:
 ======================================================================
 
+* Prevent USB commands from working when USB is stopped.
+
+* Add rudimentary handling of alternate settings of USB interfaces.
+  This is in order to fix issues with some USB sticks timing out
+  during initialization. Some code readability improvements.
+
+* PPC440 DDR setup: Set SDRAM0_CFG0[PMU]=0 for best performance
+  AMCC suggested to set the PMU bit to 0 for best performace on
+  the PPC440 DDR controller.
+  Please see doc/README.440-DDR-performance for details.
+  Patch by Stefan Roese, 28 Jul 2006
+
+* AMCC bamboo (440EP) U-Boot image reduced to 384kbyte
+  Please see doc/README.bamboo for details.
+  Patch by Stefan Roese, 27 Jul 2006
+
+* Fix CONFIG_CMDLINE_EDITING implementation
+  Patch by Stefan Roese, 27 Jul 2006
+
+* Fix preboot message on TQM5200 after switching to hush parser.
+
+* MCC200: set default configuration to low_boot DDR,
+  and support for configurable options high_boot and/or SDRAM.
+
+* Add support for 256 MB SDRAM on CPU87
+  Patch by Josef Wagner, 25 Nov 2005
+
+* Add configuration for cam5200 board (based on TQM5200S).
+
+* More code cleanup
+
+* Disabled kvme080 board in MAKEALL because of build problems.
+
+* Code cleanup
+
+* Update NetStar board
+  Patch by Ladislav Michl, 03 Nov 2005
+
+* Make code better readable.
+  Patch by Ladislav Michl, 14 Sep 2005
+
+* Enable initrd ATAG for xm250 board.
+  Patch by Josef Wagner, 05 Sep 2005
+
+* Add readline cmdline-editing extension
+  Patch by JinHua Luo, 01 Sep 2005
+
+* Add support for friendly-arm SBC-2410X board
+  Patch by JinHua Luo, 01 Sep 2005
+
+* Fix multi-part image support on i386 platform.
+  Patch by David Updegraff, 19 Aug 2005
+
+* Add support for KVME080 board
+  Patch by Sangmoon Kim, 18 Aug 2005
+
+* Fix MIPS LE build problem
+  Patch by Matej Kupljen, 10 Aug 2005
+
+* Check argument count in "mii" command.
+  Problem pointed out by Andrew Dyer, 13 Jun 2005
+
+* Cleanup TQM5200 board configurations:
+  - make highboot configurations use environment at high end, too,
+    to avoid flash fragmentation
+  - always use redundand environment
+  - don't enable video code for modules without graphics controller
+  - provide useful (though different) mtdparts settings
+  - get rid of CONFIG_CS_AUTOCONF which was always set anyway
+
+* Extend mkconfig tool to print more useful target name
+
+* Add support for high-boot on TQM5200 and TQM5200S boards.
+  Hint: the CPLD on the TQM5200 must be programmed with a software
+  version supporting the high boot option! The new TQM5200S is
+  already supporting this option. On the TQM5200 this option will be
+  supported in configurations with MPC5200 rev B processors.
+  To actually "high boot", set jumper X30 on the STK52xx.
+  Patch by Martin Krause, 12 Jul 2006
+
+* Add support for new TQM5200 revisions
+  - Support for TQM5200S (short version without graphic controller)
+  - Support for modules with 'N' type S29GL128N Spansion flashes
+    (requires changes to flash layout)
+  - Support for MPC5200B cpu (mostly support for second SDRAM bank)
+  Patch by Martin Krause, 07 Jul 2006
+
+* Fix support for PS/2 keyboard on TQM85xx boards
+  The PS/2 keyobard driver for the TQM85xx modules only supports the
+  internal DUART of the MPC85xx CPU. Since the MPC8560 doesn't
+  include a DUART, the TQM8560 modules can't be used with the PS/2
+  keyboard controller on the STK85xx board.
+  The PS/2 keyboard driver should work with the modules TQM8540,
+  TQM8541 and TQM8555, but it only has been tested on a TQM8540, yet.
+  Make sure the PS/2 controller on the STK85xx is programmed. Jumper
+  settings: X66 1-2, 9-10; X61 2-3
+  Patch by Martin Krause, 21 Jun 2006
+
+* Adjust RTC century handling on STK52xx board to match Linux driver.
+  Patch by Martin Krause, 12 Jun 2006
+
+* Adjust filenames for USB update images on TRAB board.
+  During an automatic update via USB stick, U-Boot searches for
+  images with the name "firmware.img" and "kernel.img". This names
+  are now changed to "firmw_01.img" and "kernl_01.img". This is done,
+  to prevent updates of new boards (with the new macronics "c" step
+  flashes) with old, incompatible firmware or kernel versions.
+  Patch by Martin Krause, 21 Jun 2006
+
+* Bugfix in VFD routine on TRAB board.
+  Make sure upper lext pixel can be set to blue, too
+  (so far only red was possible).
+  Patch by Martin Krause, 15 Feb 2006
+
+* Enable buffered flash writes for TB5200 board.
+
+* Fix some bugs in TRAB board flash driver.
+  - increase CFG_FLASH_ERASE_TOUT from 2 to 15 seconds
+  - use CFG_FLASH_WRITE_TOUT for programming instead of CFG_FLASH_ERASE_TOUT
+  - remove "Unlock Bypass" mode, because macronix flashes do not support
+    this mode officially
+  - fix flash reset command from 0x00FF to 0x00F0. 0x00FF is only specified
+    for Intel compatible flashes, not for AMD compatible.
+  Patch by Martin Krause, 15 Feb 2006
+
+* Add additional error messages to flash driver on TRAB board
+  (for erase errors and timeout errors)
+  Patch by Martin Krause, 14 Feb 2006
+
+* Add support for TB5200 board
+  The TB5200 ("Tinybox") is a small baseboard for the TQM5200 module
+  integrated in a little aluminium case.
+  Patch by Martin Krause, 8 Jun 2006
+
+* Enable buffered flash writes for TQM5200 board.
+
+* Fix problems with SanDisk Corporation Cruzer Micro USB memory stick.
+
+* Add support for TQM885D board.
+  Patch by Martin Krause, 20 Mar 2006
+
+* Fix FEC initialisation: All MII configuration is done via FEC1
+  registers, but MII_SPEED was configured according to FEC used. So
+  if only FEC2 was used, this caused the real MII_SPEED register in
+  FEC1 to stay uninitalised, leqading to "mii_send STUCK!" messages.
+  Fix: always configure MII_SPEED on FEC1 only.
+  Patch by Markus Klotzbuecher, 12 Jul 2006
+
+* Add support for SPC1920 board.
+  Patch by Markus Klotzbuecher, 12 Jul 2006
+
+* MCC200 board: support console on any one of the Quad UART ports.
+
+* Fix error in flash protection calculation on MCC200 board.
+
+* Major PCMCIA Cleanup to make code better readable and maintainable.
+  Notes:
+  - Board-dependend code for RPXLITE and RPXCLASSIC-based boards
+    placed to the drivers/rpx_pmcia.c file to avoid duplication.
+    Same for TQM8xx-based boards (drivers/tqm8xx_pmcia.c).
+  - drivers/i82365.c has been split into two parts located at
+    board/atc/ti113x.c and board/cpc45/pd67290.c (ATC and CPC45 are
+    the only boards using CONFIG_82365).
+  - Changes were tested for clean build and *very* *few* boards.
+
+* Fix timer problems on AMCC yucca board.
+  Set Timer Clock Select to use CPU clock as a timer input source.
+
+* Bring yucca config more in line with other AMCC boards.
+
+* Add AMCC bamboo board to MAKEALL build script.
+
+* Fix AMCC bamboo eval board compilation errors.
+
+* Add system memory to the PCI region list for AMCC PPC44x CPUs.
+  Enabled it for Yucca board.
+
+* Cleanup config file and bootup output for Yucca board.
+
+* Fix CONFIG_440_GX define usage.
+
+* Remove autogenerated bmp_logo.h file.
+
+* Add support for AMCC 440SPe CPU based eval board (Yucca).
+
+* Call serial_initialize() before first debug() is used.
+
+* Cleanup trab board for GCC-4.x
+
+* VoiceBlue update: use new MTD flash partitioning methods, use more
+  reasonable TEXT_BASE, update default environment and enable keyed
+  autoboot.
+  Patch by Ladislav Michl, 16. Aug 2005
+
+* Add forgotten changes for the PLEB 2 Board.
+  Patch by David Snowdon, 13. Aug 2005
+
+* Add support for wrPPMC7xx/74xx boards
+  Patch by Richard Danter, 12 Aug 2005
+
+* Add support for gth2 board
+  Patch by Thomas Lange, Aug 11 2005
+
+* Add support for CONFIG_SERIAL_MULTI on MPC5xxx
+  Patch by Martin Krause, 8 Jun 2006
+
+  This patch supports two serial consoles on boards with
+  a MPC5xxx CPU. The console can be switched at runtime
+  by setting stdin, stdout and stderr to the desired serial
+  interface (serial0 or serial1). The PSCs to be used as
+  console port are definded by CONFIG_PSC_CONSOLE
+  and CONFIG_PSC_CONSOLE2.
+  See README.serial_multi for details.
+
+* Bugfix in I2C initialisation on S3C2400.
+  If the bus is blocked because of a previously interrupted
+  transfer, up to eleven clocks are generated on the I2CSCL
+  line to complete the transfer and to free the bus.
+  With this fix pin I2CSCL (PG6) is really configured as GPIO
+  so the clock pulses are really generated.
+  Patch by Martin Krause, 04 Apr 2006
+
+* Fix DDR6 errata on TQM834x boards
+  Patch by Thomas Waehner, 07 Mar 2006
+
+* Remove obsolete flash driver board/tqm5200/flash.c
+  Patch by Martin Krause, 11 Jan 2006
+
+* Update configuration for CMC-PU2 board
+  Patch by Martin Krause, 17 Nov 2005
+
+* Add support for PS/2 keyboard on TQM85xx board
+  Patch by Martin Krause, 07 Nov 2005
+
+  Tested on a STK85XX baseboard. Make sure the PS/2 controller
+  has been programmed. Jumper Settings: X66 1-2, 9-10; X61 2-3
+
+* Fix TRAB channel switching delay for trab_fkt.bin standalone applikation
+  In tsc2000_read_channel() the delay after setting the multiplexer
+  to a temperature channel is increased from 1,5 ms to 10 ms. This
+  is to allow the multiplexer inputs to stabilize after huge steps
+  of the input signal level.
+  Patch by Martin Krause, 08 Nov 2005
+
+* Adjust TQM5200 make targets
+  Make the automatic CS configuration the default.
+  The dedicated configurations CONFIG_TQM5200_AA, CONFIG_TQM5200_AB
+  and CONFIG_TQM5200_AC are removed.
+  "TQM5200_config" is now the default for STK52XX.200 base boards.
+  On a STK52XX.100 base board "TQM5200_STK100_config" must be used.
+  Patch by Martin Krause, 07 Nov 2005
+
+* Fix setting of environment variable "ver" on trab board
+  The environment variable "ver" is now set before
+  do_auto_update() is called, so that "ver" can be used
+  in USB update scripts.
+  Patch by Martin Krause, 27 Oct 2005
+
+* Fix wrong usage of udelay() in led_blink() on trab board
+  Patch by Martin Krause, 27 Oct 2005
+
+* Fix udelay bug in vfd.c for trab board
+  Patch by Martin Krause, 27 Oct 2005
+
+* Disable JFFS2 support for trab board
+  Patch by Martin Krause, 27 Oct 2005
+
+* Change mtdparts definition on trab board to match current flash map
+  Patch by Martin Krause, 27 Oct 2005
+
+* Fix memory init problems on MCC200 board
+
+* Fix IxEthDB.h to compile again
+  Patch by Stefan Roese, 14 Jun 2006
+
+* Minor cleanup for PCS440EP board
+  Patch by Stefan Roese, 13 Jun 2006
+
+* Add MCF5282 support (without preloader)
+  relocate ichache_State to ram
+  u-boot can run from internal flash
+  Add EB+MCF-EV123 board support.
+  Add m68k Boards to MAKEALL
+  Patch from Jens Scharsig, 08 Aug 2005
+
+* Nios II - Add Altera EP1C20, EP1S10 and EP1S40 boards
+  Patch by Scott McNutt, 08 Jun 2006
+
+* Nios II - Add EPCS Controller bootrom work-around
+  -When booting from an epcs controller, the epcs bootrom may leave the
+  slave select in an asserted state causing soft reset hang. This
+  patch ensures slave select is negated at reset.
+  Patch by Scott McNutt, 08 Jun 2006
+
+* Update PK1C20 board
+  -Update base addresses for standard configuration
+  -Eliminate use of CACHE_BYPASS in board code
+  Patch by Scott McNutt, 08 Jun 2006
+
+* Nios II - Fix I/O Macros and mini-app stubs
+  -Fix asm/io.h macros
+  -Eliminate use of CACHE_BYPASS in cpu code
+  -Eliminate assembler warnings
+  -Fix mini-app stubs and force no small data
+  Patch by Scott McNutt, 08 Jun 2006
+
+* Fix U-Boot environment sector protection on MCC200 board
+
 * Minor cleanup for PCS440EP board
 
 * Update PCS440EP port to fit into one flash device (incl. environment)
diff --git a/CREDITS b/CREDITS
index f91fa3e48e..32d3060c3f 100644
--- a/CREDITS
+++ b/CREDITS
@@ -105,6 +105,10 @@ N: Magnus Damm
 E: damm@opensource.se
 D: 8xxrom
 
+N: Richard Danter
+E: richard.danter@windriver.com
+D: Support for Wind River PPMC 7xx/74xx boards
+
 N: George G. Davis
 E: gdavis@mvista.com
 D: Board ports for ADS GraphicsClient+ and Intel Assabet
@@ -229,6 +233,7 @@ D: Port to Windriver ppmc8260 board
 N: Sangmoon Kim
 E: dogoil@etinsys.com
 D: Support for debris board
+D: Support for KVME080 board
 
 N: Frederick W. Klatt
 E: fred.klatt@windriver.com
@@ -253,7 +258,7 @@ D  Support for Intrinsyc CERF PXA250 board.
 
 N: Thomas Lange
 E: thomas@corelatus.se
-D: Support for GTH and dbau1x00 boards; lots of PCMCIA fixes
+D: Support for GTH, GTH2 and dbau1x00 boards; lots of PCMCIA fixes
 
 N: Marc Leeman
 E: marc.leeman@barco.com
diff --git a/MAINTAINERS b/MAINTAINERS
index 2e5bfe2eaf..e1baa422ae 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -197,6 +197,7 @@ Brad Kemp <Brad.Kemp@seranoa.com>
 Sangmoon Kim <dogoil@etinsys.com>
 
 	debris			MPC8245
+	KVME080			MPC8245
 
 Thomas Lange <thomas@corelatus.se>
 
@@ -489,6 +490,7 @@ Wolfgang Denk <wd@denx.de>
 
 Thomas Lange <thomas@corelatus.se>
 	dbau1x00		MIPS32 Au1000
+	gth2			MIPS32 Au1000
 
 #########################################################################
 # Nios-32 Systems:							#
@@ -517,6 +519,9 @@ Scott McNutt <smcnutt@psyent.com>
 
 	PCI5441			Nios-II
 	PK1C20			Nios-II
+	EP1C20			Nios-II
+	EP1S10			Nios-II
+	EP1S40			Nios-II
 
 #########################################################################
 # MicroBlaze Systems:							#
diff --git a/MAKEALL b/MAKEALL
index 5b5637708a..467a9bee0a 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -27,14 +27,14 @@ LIST_5xx="	\
 LIST_5xxx="	\
 	BC3450		cpci5200	EVAL5200	icecube_5100	\
 	icecube_5200	lite5200b	mcc200		o2dnt		\
-	pf5200		PM520		Total5100	Total5200	\
-	Total5200_Rev2	TQM5200_auto					\
+	pf5200		PM520		TB5200		Total5100	\
+	Total5200	Total5200_Rev2	TQM5200		TQM5200_B	\
+	TQM5200S							\
 "
 
 #########################################################################
 ## MPC8xx Systems
 #########################################################################
-
 LIST_8xx="	\
 	Adder87x	GENIETV		MBX860T		R360MPI		\
 	AdderII		GTH		MHPC		RBC823		\
@@ -44,16 +44,18 @@ LIST_8xx="	\
 	CCM		IP860		NETPHONE	RPXlite_DW	\
 	cogent_mpc8xx	IVML24		NETTA		RRvision	\
 	ELPT860		IVML24_128	NETTA2		SM850		\
-	EP88x		IVML24_256	NETTA_ISDN	SPD823TS	\
-	ESTEEM192E	IVMS8		NETVIA		svm_sc8xx	\
-	ETX094		IVMS8_128	NETVIA_V2	SXNI855T	\
-	FADS823		IVMS8_256	NX823		TOP860		\
-	FADS850SAR	KUP4K		pcu_e		TQM823L		\
-	FADS860T	KUP4X		QS823		TQM823L_LCD	\
-	FLAGADM		LANTEC		QS850		TQM850L		\
-	FPS850L		lwmon		QS860T		TQM855L		\
-	GEN860T		MBX		quantum		TQM860L		\
-	GEN860T_SC					uc100		\
+	EP88x		IVML24_256	NETTA_ISDN	spc1920		\
+	ESTEEM192E	IVMS8		NETVIA		SPD823TS	\
+	ETX094		IVMS8_128	NETVIA_V2	svm_sc8xx	\
+	FADS823		IVMS8_256	NX823		SXNI855T	\
+	FADS850SAR	KUP4K		pcu_e		TOP860		\
+	FADS860T	KUP4X		QS823		TQM823L		\
+	FLAGADM		LANTEC		QS850		TQM823L_LCD	\
+	FPS850L		lwmon		QS860T		TQM850L		\
+	GEN860T		MBX		quantum		TQM855L		\
+	GEN860T_SC					TQM860L		\
+							TQM885D		\
+							uc100		\
 							v37		\
 "
 
@@ -72,10 +74,10 @@ LIST_4xx="	\
 	luan		METROBOX	MIP405		MIP405T		\
 	ML2		ml300		ocotea		OCRTC		\
 	ORSG		p3p440		PCI405		pcs440ep	\
-	PIP405		PLU405		PMC405	        PPChameleonEVB	\
-	sbc405		VOH405		VOM405          W7OLMC		\
+	PIP405		PLU405		PMC405		PPChameleonEVB	\
+	sbc405		VOH405		VOM405		W7OLMC		\
 	W7OLMG		walnut		WUH405		XPEDITE1K	\
-	yellowstone	yosemite					\
+	yellowstone	yosemite	yucca		bamboo		\
 "
 
 #########################################################################
@@ -93,9 +95,9 @@ LIST_8220="	\
 LIST_824x="	\
 	A3000		barco		BMW		CPC45		\
 	CU824		debris		eXalion		HIDDEN_DRAGON	\
-	MOUSSE		MUSENKI		MVBLUE		OXC		\
-	PN62		Sandpoint8240	Sandpoint8245	sbc8240		\
-	SL8245		utx8245						\
+			MOUSSE		MUSENKI		MVBLUE		\
+	OXC		PN62		Sandpoint8240	Sandpoint8245	\
+	sbc8240		SL8245		utx8245				\
 "
 
 #########################################################################
@@ -142,7 +144,7 @@ LIST_74xx="	\
 "
 
 LIST_7xx="	\
-	BAB7xx		CPCI750		ELPPC				\
+	BAB7xx		CPCI750		ELPPC		ppmc7xx		\
 "
 
 LIST_ppc="${LIST_5xx}  ${LIST_5xxx}		\
@@ -179,9 +181,10 @@ LIST_ARM9="	\
 	ap966		cp920t		cp922_XA10	cp926ejs	\
 	cp946es		cp966		lpd7a400	mp2usb		\
 	mx1ads		mx1fs2		netstar		omap1510inn	\
-	omap1610h2	omap1610inn	omap730p2	scb9328		\
-	smdk2400	smdk2410	trab		VCMA9		\
-	versatile	versatileab	versatilepb	voiceblue
+	omap1610h2	omap1610inn	omap730p2	sbc2410x	\
+	scb9328		smdk2400	smdk2410	trab		\
+	VCMA9		versatile	versatileab	versatilepb	\
+	voiceblue							\
 "
 
 #########################################################################
@@ -204,9 +207,9 @@ LIST_ARM11="	\
 
 LIST_pxa="	\
 	adsvix		cerf250		cradle		csb226		\
-	delta		innokom		lubbock		pxa255_idp	\
-	wepep250	xaeniax		xm250		xsengine	\
-	zylonite							\
+	delta		innokom		lubbock		pleb2		\
+	pxa255_idp	wepep250	xaeniax		xm250		\
+	xsengine	zylonite					\
 "
 
 LIST_ixp="ixdp425	ixdpg425	pdnb3"
@@ -226,7 +229,7 @@ LIST_mips4kc="incaip"
 
 LIST_mips5kc="purple"
 
-LIST_au1xx0="dbau1000 dbau1100 dbau1500 dbau1550 dbau1550_el"
+LIST_au1xx0="dbau1000 dbau1100 dbau1500 dbau1550 dbau1550_el gth2"
 
 LIST_mips="${LIST_mips4kc} ${LIST_mips5kc} ${LIST_au1xx0}"
 
@@ -255,29 +258,38 @@ LIST_x86="${LIST_I486}"
 #########################################################################
 
 LIST_nios="	\
-	ADNPESC1 ADNPESC1_base_32					\
+	ADNPESC1		ADNPESC1_base_32			\
 	ADNPESC1_DNPEVA2_base_32					\
-	DK1C20 DK1C20_standard_32					\
-	DK1S10 DK1S10_standard_32 DK1S10_mtx_ldk_20			\
+	DK1C20			DK1C20_standard_32			\
+	DK1S10			DK1S10_standard_32 DK1S10_mtx_ldk_20	\
 "
 
 #########################################################################
 ## Nios-II Systems
 #########################################################################
 
-LIST_nios2="PCI5441 PK1C20"
+LIST_nios2="	\
+	EP1C20		EP1S10		EP1S40				\
+	PCI5441		PK1C20						\
+"
 
 #########################################################################
 ## MicroBlaze Systems
 #########################################################################
 
-LIST_microblaze="suzaku"
+LIST_microblaze="	\
+	suzaku
+"
 
 #########################################################################
 ## ColdFire Systems
 #########################################################################
 
-LIST_coldfire="cobra5272 M5272C3 M5282EVB TASREG r5200 M5271EVB"
+LIST_coldfire="	\
+	cobra5272	EB+MCF-EV123	EB+MCF-EV123_internal		\
+	M5271EVB	M5272C3		M5282EVB	TASREG		\
+	r5200		M5271EVB					\
+"
 
 #-----------------------------------------------------------------------
 
diff --git a/Makefile b/Makefile
index 7de890e74c..2eec40df89 100644
--- a/Makefile
+++ b/Makefile
@@ -7,7 +7,7 @@
 #
 # This program is free software; you can redistribute it and/or
 # modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
+# published by the Free Software Foundatio; either version 2 of
 # the License, or (at your option) any later version.
 #
 # This program is distributed in the hope that it will be useful,
@@ -326,13 +326,25 @@ lite5200b_LOWBOOT_config:	unconfig
 	@./mkconfig -a IceCube  ppc mpc5xxx icecube
 
 mcc200_config	\
-mcc200_lowboot_config:	unconfig
+mcc200_SDRAM	\
+mcc200_highboot	\
+mcc200_highboot_SDRAM:	unconfig
 	@ >include/config.h
-	@[ -z "$(findstring lowboot_,$@)" ] || \
-		{ echo "TEXT_BASE = 0xFC000000" >board/mcc200/config.tmp ; \
-		  echo "... with lowboot configuration" ; \
+	@[ -n "$(findstring highboot,$@)" ] || \
+		{ echo "... with lowboot configuration" ; \
+		}
+	@[ -z "$(findstring highboot,$@)" ] || \
+		{ echo "TEXT_BASE = 0xFFF00000" >board/mcc200/config.tmp ; \
+		  echo "... with highboot configuration" ; \
+		}
+	@[ -n "$(findstring _SDRAM,$@)" ] || \
+		{ echo "... with DDR" ; \
 		}
-	@./mkconfig mcc200 ppc mpc5xxx mcc200
+	@[ -z "$(findstring _SDRAM,$@)" ] || \
+		{ echo "#define CONFIG_MCC200_SDRAM"	>>include/config.h ; \
+		  echo "... with SDRAM" ; \
+		}
+	@./mkconfig -a mcc200 ppc mpc5xxx mcc200
 
 o2dnt_config:
 	@./mkconfig o2dnt ppc mpc5xxx o2dnt
@@ -359,15 +371,21 @@ smmaco4_config: unconfig
 	@./mkconfig -a smmaco4 ppc mpc5xxx tqm5200
 
 spieval_config:	unconfig
-	echo "#define CONFIG_CS_AUTOCONF">>include/config.h
-	echo "... with automatic CS configuration"
 	@./mkconfig -a spieval ppc mpc5xxx tqm5200
 
+TB5200_B_config \
+TB5200_config:	unconfig
+	@[ -z "$(findstring _B,$@)" ] || \
+		{ echo "#define CONFIG_TQM5200_B"	>>include/config.h ; \
+		  echo "... with MPC5200B processor" ; \
+		}
+	@./mkconfig -n $@ -a TB5200 ppc mpc5xxx tqm5200
+
 MINI5200_config	\
 EVAL5200_config	\
 TOP5200_config:	unconfig
 	@ echo "#define CONFIG_$(@:_config=) 1"	>include/config.h
-	@./mkconfig -a TOP5200 ppc mpc5xxx top5200 emk
+	@./mkconfig -n $@ -a TOP5200 ppc mpc5xxx top5200 emk
 
 Total5100_config		\
 Total5200_config		\
@@ -397,36 +415,40 @@ Total5200_Rev2_lowboot_config:	unconfig
 		}
 	@./mkconfig -a Total5200 ppc mpc5xxx total5200
 
-TQM5200_auto_config	\
-TQM5200_AA_config	\
-TQM5200_AB_config	\
-TQM5200_AC_config	\
+TQM5200_config	\
+TQM5200_B_config \
+TQM5200_B_HIGHBOOT_config \
+TQM5200S_config \
+TQM5200S_HIGHBOOT_config \
+TQM5200_STK100_config \
+cam5200_config \
 MiniFAP_config:	unconfig
 	@ >include/config.h
 	@[ -z "$(findstring MiniFAP,$@)" ] || \
 		{ echo "#define CONFIG_MINIFAP"	>>include/config.h ; \
-		  echo "#define CONFIG_TQM5200_AC"	>>include/config.h ; \
 		  echo "... TQM5200_AC on MiniFAP" ; \
 		}
-	@[ -z "$(findstring AA,$@)" ] || \
-		{ echo "#define CONFIG_TQM5200_AA"	>>include/config.h ; \
-		  echo "... with 4 MB Flash, 16 MB SDRAM, 32 kB EEPROM" ; \
+	@[ -z "$(findstring cam5200,$@)" ] || \
+		{ echo "#define CONFIG_CAM5200"	>>include/config.h ; \
+		  echo "#define CONFIG_TQM5200S"	>>include/config.h ; \
+		  echo "#define CONFIG_TQM5200_B"	>>include/config.h ; \
+		  echo "... TQM5200S on Cam5200" ; \
+		}
+	@[ -z "$(findstring STK100,$@)" ] || \
+		{ echo "#define CONFIG_STK52XX_REV100"	>>include/config.h ; \
+		  echo "... on a STK52XX.100 base board" ; \
 		}
-	@[ -z "$(findstring AB,$@)" ] || \
-		{ echo "#define CONFIG_TQM5200_AB"	>>include/config.h ; \
-		  echo "... with 64 MB Flash, 64 MB SDRAM, 32 kB EEPROM, 512 kB SRAM" ; \
-		  echo "... with Graphics Controller"; \
+	@[ -z "$(findstring TQM5200_B,$@)" ] || \
+		{ echo "#define CONFIG_TQM5200_B"	>>include/config.h ; \
 		}
-	@[ -z "$(findstring AC,$@)" ] || \
-		{ echo "#define CONFIG_TQM5200_AC"	>>include/config.h ; \
-		  echo "... with 4 MB Flash, 128 MB SDRAM" ; \
-		  echo "... with Graphics Controller"; \
+	@[ -z "$(findstring TQM5200S,$@)" ] || \
+		{ echo "#define CONFIG_TQM5200S"	>>include/config.h ; \
+		  echo "#define CONFIG_TQM5200_B"	>>include/config.h ; \
 		}
-	@[ -z "$(findstring auto,$@)" ] || \
-		{ echo "#define CONFIG_CS_AUTOCONF"	>>include/config.h ; \
-		  echo "... with automatic CS configuration" ; \
+	@[ -z "$(findstring HIGHBOOT,$@)" ] || \
+		{ echo "TEXT_BASE = 0xFFF00000" >board/tqm5200/config.tmp ; \
 		}
-	@./mkconfig -a TQM5200 ppc mpc5xxx tqm5200
+	@./mkconfig -n $@ -a TQM5200 ppc mpc5xxx tqm5200
 
 #########################################################################
 ## MPC8xx Systems
@@ -723,6 +745,9 @@ RRvision_LCD_config:	unconfig
 SM850_config	:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc8xx tqm8xx
 
+spc1920_config:
+	@./mkconfig $(@:_config=) ppc mpc8xx spc1920
+
 SPD823TS_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc8xx spd8xx
 
@@ -760,6 +785,7 @@ TQM855M_config		\
 TQM860M_config		\
 TQM862M_config		\
 TQM866M_config		\
+TQM885D_config		\
 virtlab2_config:	unconfig
 	@ >include/config.h
 	@[ -z "$(findstring _LCD,$@)" ] || \
@@ -999,6 +1025,9 @@ yosemite_config:	unconfig
 yellowstone_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx yellowstone amcc
 
+yucca_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx yucca amcc
+
 #########################################################################
 ## MPC8220 Systems
 #########################################################################
@@ -1049,6 +1078,9 @@ eXalion_config: unconfig
 HIDDEN_DRAGON_config: unconfig
 	@./mkconfig $(@:_config=) ppc mpc824x hidden_dragon
 
+kvme080_config: unconfig
+	@./mkconfig $(@:_config=) ppc mpc824x kvme080 etin
+
 MOUSSE_config: unconfig
 	@./mkconfig $(@:_config=) ppc mpc824x mousse
 
@@ -1303,9 +1335,6 @@ VoVPN-GW_100MHz_config:		unconfig
 ZPC1900_config: unconfig
 	@./mkconfig $(@:_config=) ppc mpc8260 zpc1900
 
-#========================================================================
-# M68K
-#========================================================================
 #########################################################################
 ## Coldfire
 #########################################################################
@@ -1313,6 +1342,19 @@ ZPC1900_config: unconfig
 cobra5272_config :		unconfig
 	@./mkconfig $(@:_config=) m68k mcf52x2 cobra5272
 
+EB+MCF-EV123_config :		unconfig
+	@ >include/config.h
+	@echo "TEXT_BASE = 0xFFE00000"|tee board/BuS/EB+MCF-EV123/textbase.mk
+	@./mkconfig EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
+
+EB+MCF-EV123_internal_config :	unconfig
+	@ >include/config.h
+	@echo "TEXT_BASE = 0xF0000000"|tee board/BuS/EB+MCF-EV123/textbase.mk
+	@./mkconfig EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
+
+M5271EVB_config :		unconfig
+	@./mkconfig $(@:_config=) m68k mcf52x2 m5271evb
+
 M5272C3_config :		unconfig
 	@./mkconfig $(@:_config=) m68k mcf52x2 m5272c3
 
@@ -1325,9 +1367,6 @@ TASREG_config :		unconfig
 r5200_config :		unconfig
 	@./mkconfig $(@:_config=) m68k mcf52x2 r5200
 
-M5271EVB_config :		unconfig
-	@./mkconfig $(@:_config=) m68k mcf52x2 m5271evb
-
 #########################################################################
 ## MPC83xx Systems
 #########################################################################
@@ -1471,6 +1510,9 @@ PCIPPC6_config: unconfig
 ZUMA_config:	unconfig
 	@./mkconfig $(@:_config=) ppc 74xx_7xx evb64260
 
+ppmc7xx_config: unconfig
+	@./mkconfig $(@:_config=) ppc 74xx_7xx ppmc7xx
+
 #========================================================================
 # ARM
 #========================================================================
@@ -1604,6 +1646,9 @@ omap730p2_cs3boot_config :	unconfig
 	fi;
 	@./mkconfig -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2 NULL omap
 
+sbc2410x_config: unconfig
+	@./mkconfig $(@:_config=) arm arm920t sbc2410x NULL s3c24x0
+
 scb9328_config	:	unconfig
 	@./mkconfig $(@:_config=) arm arm920t scb9328 NULL imx
 
@@ -1671,6 +1716,11 @@ cm4008_config	:	unconfig
 cm41xx_config	:	unconfig
 	@./mkconfig $(@:_config=) arm arm920t cm41xx NULL ks8695
 
+gth2_config		: 	unconfig
+	@ >include/config.h
+	@echo "#define CONFIG_GTH2 1" >>include/config.h
+	@./mkconfig -a gth2 mips mips gth2
+
 #########################################################################
 ## S3C44B0 Systems
 #########################################################################
@@ -1728,6 +1778,9 @@ ixdpg425_config	:	unconfig
 lubbock_config	:	unconfig
 	@./mkconfig $(@:_config=) arm pxa lubbock
 
+pleb2_config	:	unconfig
+	@./mkconfig $(@:_config=) arm pxa pleb2
+
 logodl_config	:	unconfig
 	@./mkconfig $(@:_config=) arm pxa logodl
 
@@ -1914,6 +1967,15 @@ ADNPESC1_config: unconfig
 ## Nios-II
 #########################################################################
 
+EP1C20_config : unconfig
+	@./mkconfig  EP1C20 nios2 nios2 ep1c20 altera
+
+EP1S10_config : unconfig
+	@./mkconfig  EP1S10 nios2 nios2 ep1s10 altera
+
+EP1S40_config : unconfig
+	@./mkconfig  EP1S40 nios2 nios2 ep1s40 altera
+
 PK1C20_config : unconfig
 	@./mkconfig  PK1C20 nios2 nios2 pk1c20 psyent
 
@@ -1967,6 +2029,7 @@ clean:
 	rm -f board/netstar/*.srec board/netstar/*.bin
 	rm -f board/trab/trab_fkt board/voiceblue/eeprom
 	rm -f board/integratorap/u-boot.lds board/integratorcp/u-boot.lds
+	rm -f include/bmp_logo.h
 
 clobber:	clean
 	find . -type f \( -name .depend \
diff --git a/README b/README
index 3ffef62538..e772c1af00 100644
--- a/README
+++ b/README
@@ -306,12 +306,13 @@ The following options need to be configured:
 
 		CONFIG_ARMADILLO,	CONFIG_AT91RM9200DK,	CONFIG_CERF250,
 		CONFIG_CSB637,		CONFIG_DELTA,		CONFIG_DNP1110,
-	 	CONFIG_EP7312,		CONFIG_H2_OMAP1610,	CONFIG_HHP_CRADLE,
+		CONFIG_EP7312,		CONFIG_H2_OMAP1610,	CONFIG_HHP_CRADLE,
 		CONFIG_IMPA7,	    CONFIG_INNOVATOROMAP1510,	CONFIG_INNOVATOROMAP1610,
 		CONFIG_KB9202,		CONFIG_LART,		CONFIG_LPD7A400,
 		CONFIG_LUBBOCK,		CONFIG_OSK_OMAP5912,	CONFIG_OMAP2420H4,
-		CONFIG_SHANNON,		CONFIG_P2_OMAP730,	CONFIG_SMDK2400,
-		CONFIG_SMDK2410,	CONFIG_TRAB,		CONFIG_VCMA9
+		CONFIG_PLEB2,		CONFIG_SHANNON,		CONFIG_P2_OMAP730,
+		CONFIG_SMDK2400,	CONFIG_SMDK2410,	CONFIG_TRAB,
+		CONFIG_VCMA9
 
 		MicroBlaze based boards:
 		------------------------
@@ -322,6 +323,7 @@ The following options need to be configured:
 		------------------------
 
 		CONFIG_PCI5441 CONFIG_PK1C20
+		CONFIG_EP1C20 CONFIG_EP1S10 CONFIG_EP1S40
 
 
 - CPU Module Type: (if CONFIG_COGENT is defined)
@@ -1488,6 +1490,12 @@ The following options need to be configured:
 		of the backslashes before semicolons and special
 		symbols.
 
+- Commandline Editing and History:
+		CONFIG_CMDLINE_EDITING
+
+		Enable editiong and History functions for interactive
+		commandline input operations
+
 - Default Environment:
 		CONFIG_EXTRA_ENV_SETTINGS
 
diff --git a/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c b/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c
new file mode 100644
index 0000000000..f18313d516
--- /dev/null
+++ b/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c
@@ -0,0 +1,162 @@
+/*
+ * (C) Copyright 2005
+ * BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de>
+ *
+ * (C) Copyright 2000-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include "asm/m5282.h"
+#include "VCxK.h"
+
+int checkboard (void)
+{
+	puts ("Board: MCF-EV1 + MCF-EV23 (BuS Elektronik GmbH & Co. KG)\n");
+#if (TEXT_BASE ==  CFG_INT_FLASH_BASE)
+	puts ("       Boot from Internal FLASH\n");
+#endif
+
+	return 0;
+}
+
+long int initdram (int board_type)
+{
+	int size,i;
+
+	size = 0;
+	MCFSDRAMC_DCR =	MCFSDRAMC_DCR_RTIM_6
+			| MCFSDRAMC_DCR_RC((15 * CFG_CLK)>>4);
+	#ifdef CFG_SDRAM_BASE0
+
+		MCFSDRAMC_DACR0 =	MCFSDRAMC_DACR_BASE(CFG_SDRAM_BASE0)
+					| MCFSDRAMC_DACR_CASL(1)
+ 					| MCFSDRAMC_DACR_CBM(3)
+					| MCFSDRAMC_DACR_PS_16);
+
+		MCFSDRAMC_DMR0 =	MCFSDRAMC_DMR_BAM_16M
+					| MCFSDRAMC_DMR_V;
+
+		MCFSDRAMC_DACR0 |= 	MCFSDRAMC_DACR_IP;
+
+		*(unsigned short *)(CFG_SDRAM_BASE0) = 0xA5A5;
+		MCFSDRAMC_DACR0 |=	MCFSDRAMC_DACR_RE;
+		for (i=0; i < 2000; i++)
+			asm(" nop");
+		mbar_writeLong(MCFSDRAMC_DACR0, mbar_readLong(MCFSDRAMC_DACR0)
+								    | MCFSDRAMC_DACR_IMRS);
+		*(unsigned int *)(CFG_SDRAM_BASE0 + 0x220) = 0xA5A5;
+		size += CFG_SDRAM_SIZE * 1024 * 1024;
+	#endif
+	#ifdef CFG_SDRAM_BASE1
+		MCFSDRAMC_DACR1 =	MCFSDRAMC_DACR_BASE(CFG_SDRAM_BASE1)
+					| MCFSDRAMC_DACR_CASL(1)
+ 					| MCFSDRAMC_DACR_CBM(3)
+					| MCFSDRAMC_DACR_PS_16;
+
+		MCFSDRAMC_DMR1 = 	MCFSDRAMC_DMR_BAM_16M
+					| MCFSDRAMC_DMR_V;
+
+		MCFSDRAMC_DACR1 |=	MCFSDRAMC_DACR_IP;
+
+		*(unsigned short *)(CFG_SDRAM_BASE1) = 0xA5A5;
+		MCFSDRAMC_DACR1 |=	MCFSDRAMC_DACR_RE;
+		for (i=0; i < 2000; i++)
+			asm(" nop");
+		MCFSDRAMC_DACR1 |= 	MCFSDRAMC_DACR_IMRS;
+		*(unsigned int *)(CFG_SDRAM_BASE1 + 0x220) = 0xA5A5;
+		size += CFG_SDRAM_SIZE1 * 1024 * 1024;
+	#endif
+	return size;
+}
+
+
+#if defined(CFG_DRAM_TEST)
+int testdram (void)
+{
+	uint *pstart = (uint *) CFG_MEMTEST_START;
+	uint *pend = (uint *) CFG_MEMTEST_END;
+	uint *p;
+
+	printf("SDRAM test phase 1:\n");
+	for (p = pstart; p < pend; p++)
+		*p = 0xaaaaaaaa;
+
+	for (p = pstart; p < pend; p++) {
+		if (*p != 0xaaaaaaaa) {
+			printf ("SDRAM test fails at: %08x\n", (uint) p);
+			return 1;
+		}
+	}
+
+	printf("SDRAM test phase 2:\n");
+	for (p = pstart; p < pend; p++)
+		*p = 0x55555555;
+
+	for (p = pstart; p < pend; p++) {
+		if (*p != 0x55555555) {
+			printf ("SDRAM test fails at: %08x\n", (uint) p);
+			return 1;
+		}
+	}
+
+	printf("SDRAM test passed.\n");
+	return 0;
+}
+#endif
+
+int misc_init_r(void)
+{
+	init_vcxk();
+	return 1;
+}
+
+/*---------------------------------------------------------------------------*/
+
+int do_vcimage (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	int rcode = 0;
+	ulong source;
+
+	switch (argc) {
+	case 2:
+		source = simple_strtoul(argv[1],NULL,16);
+		vcxk_loadimage(source);
+		rcode = 0;
+		break;
+	default:
+		printf ("Usage:\n%s\n", cmdtp->usage);
+		rcode = 1;
+		break;
+	}
+	return rcode;
+}
+
+/***************************************************/
+
+U_BOOT_CMD(
+	vcimage,	2,	0,	do_vcimage,
+	"vcimage - loads an image to Display\n",
+	"vcimage addr\n"
+);
+
+/* EOF EB+MCF-EV123c */
diff --git a/board/BuS/EB+MCF-EV123/Makefile b/board/BuS/EB+MCF-EV123/Makefile
new file mode 100644
index 0000000000..0596572d19
--- /dev/null
+++ b/board/BuS/EB+MCF-EV123/Makefile
@@ -0,0 +1,40 @@
+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	= $(BOARD).o cfm_flash.o flash.o VCxK.o
+
+$(LIB):	.depend $(OBJS)
+	$(AR) crv $@ $(OBJS)
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/board/BuS/EB+MCF-EV123/VCxK.c b/board/BuS/EB+MCF-EV123/VCxK.c
new file mode 100644
index 0000000000..493881791b
--- /dev/null
+++ b/board/BuS/EB+MCF-EV123/VCxK.c
@@ -0,0 +1,136 @@
+/*
+ * (C) Copyright 2005
+ * BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/m5282.h>
+#include "VCxK.h"
+
+vu_char *vcxk_bws = (vu_char *)(CFG_CS3_BASE);
+#define VCXK_BWS vcxk_bws
+
+static ulong vcxk_driver;
+
+
+ulong search_vcxk_driver(void);
+void vcxk_cls(void);
+void vcxk_setbrightness(short brightness);
+int vcxk_request(void);
+int vcxk_acknowledge_wait(void);
+void vcxk_clear(void);
+
+int init_vcxk(void)
+{
+	VIDEO_Invert_CFG &= ~VIDEO_Invert_IO;
+	VIDEO_INVERT_PORT |= VIDEO_INVERT_PIN;
+	VIDEO_INVERT_DDR  |= VIDEO_INVERT_PIN;
+
+	VIDEO_REQUEST_PORT |= VIDEO_REQUEST_PIN;
+	VIDEO_REQUEST_DDR |= VIDEO_REQUEST_PIN;
+
+	VIDEO_ACKNOWLEDGE_DDR &= ~VIDEO_ACKNOWLEDGE_PIN;
+
+	vcxk_driver = search_vcxk_driver();
+	if (vcxk_driver)
+	{
+		/* use flash resist driver */
+	}
+	else
+	{
+		vcxk_cls();
+		vcxk_cls();
+		vcxk_setbrightness(1000);
+	}
+	VIDEO_ENABLE_DDR |= VIDEO_ENABLE_PIN;
+	VIDEO_ENABLE_PORT |= VIDEO_ENABLE_PIN;
+	VIDEO_ENABLE_PORT &= ~VIDEO_ENABLE_PIN;
+	return 1;
+}
+
+void 	vcxk_loadimage(ulong source)
+{
+	int cnt;
+	vcxk_acknowledge_wait();
+	for (cnt=0; cnt<16384; cnt++)
+	{
+		VCXK_BWS[cnt*2] = (*(vu_char*) source);
+		source++;
+	}
+	vcxk_request();
+}
+
+void vcxk_cls(void)
+{
+	vcxk_acknowledge_wait();
+	vcxk_clear();
+	vcxk_request();
+}
+
+void vcxk_clear(void)
+{
+	int cnt;
+	for (cnt=0; cnt<16384; cnt++)
+	{
+		VCXK_BWS[cnt*2] = 0x00;
+	}
+}
+
+void vcxk_setbrightness(short brightness)
+{
+	VCXK_BWS[0x8000]=(brightness >> 4) +2;
+	VCXK_BWS[0xC000]= (brightness + 23) >> 8;
+	VCXK_BWS[0xC001]= (brightness + 23) & 0xFF;
+}
+
+int vcxk_request(void)
+{
+	if (vcxk_driver)
+	{
+		/* use flash resist driver */
+	}
+	else
+	{
+		VIDEO_REQUEST_PORT &= ~VIDEO_REQUEST_PIN;
+		VIDEO_REQUEST_PORT |= VIDEO_REQUEST_PIN;
+	}
+	return 1;
+}
+
+int vcxk_acknowledge_wait(void)
+{
+	if (vcxk_driver)
+	{
+		/* use flash resist driver */
+	}
+	else
+	{
+		while (!(VIDEO_ACKNOWLEDGE_PORT & VIDEO_ACKNOWLEDGE_PIN));
+	}
+	return 1;
+}
+
+ulong search_vcxk_driver(void)
+{
+	return 0;
+}
+
+/* eof */
diff --git a/board/BuS/EB+MCF-EV123/VCxK.h b/board/BuS/EB+MCF-EV123/VCxK.h
new file mode 100644
index 0000000000..74467ba98a
--- /dev/null
+++ b/board/BuS/EB+MCF-EV123/VCxK.h
@@ -0,0 +1,48 @@
+/*
+ * (C) Copyright 2005
+ * BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __VCXK_H_
+#define __VCXK_H_
+
+extern int init_vcxk(void);
+void 	vcxk_loadimage(ulong source);
+
+#define VIDEO_ACKNOWLEDGE_PORT	MCFGPTB_GPTPORT
+#define VIDEO_ACKNOWLEDGE_DDR 	MCFGPTB_GPTDDR
+#define VIDEO_ACKNOWLEDGE_PIN	0x0001
+
+#define VIDEO_ENABLE_PORT    	MCFGPTB_GPTPORT
+#define VIDEO_ENABLE_DDR 	MCFGPTB_GPTDDR
+#define VIDEO_ENABLE_PIN	0x0002
+
+#define VIDEO_REQUEST_PORT   	MCFGPTB_GPTPORT
+#define VIDEO_REQUEST_DDR 	MCFGPTB_GPTDDR
+#define VIDEO_REQUEST_PIN	0x0004
+
+#define VIDEO_Invert_CFG	MCFGPIO_PEPAR
+#define VIDEO_Invert_IO		MCFGPIO_PEPAR_PEPA2
+#define VIDEO_INVERT_PORT   	MCFGPIO_PORTE
+#define VIDEO_INVERT_DDR 	MCFGPIO_DDRE
+#define VIDEO_INVERT_PIN	MCFGPIO_PORT2
+
+#endif
diff --git a/board/BuS/EB+MCF-EV123/cfm_flash.c b/board/BuS/EB+MCF-EV123/cfm_flash.c
new file mode 100644
index 0000000000..6ecf0d1f54
--- /dev/null
+++ b/board/BuS/EB+MCF-EV123/cfm_flash.c
@@ -0,0 +1,212 @@
+/*
+ * Basic Flash Driver for Freescale MCF 5281/5282 internal FLASH
+ *
+ * (C) Copyright 2005 BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/m5282.h>
+#include  "cfm_flash.h"
+
+#if defined(CONFIG_M5281) || defined(CONFIG_M5282)
+
+#if (CFG_CLK>20000000)
+	#define CFM_CLK  (((long) CFG_CLK / (400000 * 8) + 1) | 0x40)
+#else
+	#define CFM_CLK  ((long) CFG_CLK / 400000 + 1)
+#endif
+
+#define cmf_backdoor_address(addr)	(((addr) & 0x0007FFFF) | 0x04000000 | \
+					 (CFG_MBAR & 0xC0000000))
+
+void cfm_flash_print_info (flash_info_t * info)
+{
+	printf ("Freescale: ");
+	switch (info->flash_id & FLASH_TYPEMASK) {
+	case FREESCALE_ID_MCF5281 & FLASH_TYPEMASK:
+		printf ("MCF5281 internal FLASH\n");
+		break;
+	case FREESCALE_ID_MCF5282 & FLASH_TYPEMASK:
+		printf ("MCF5282 internal FLASH\n");
+		break;
+	default:
+		printf ("Unknown Chip Type\n");
+		break;
+	}
+}
+
+void cfm_flash_init (flash_info_t * info)
+{
+	int sector;
+	ulong protection;
+	MCFCFM_MCR = 0;
+	MCFCFM_CLKD = CFM_CLK;
+	debug ("CFM Clock divider: %ld (%d Hz @ %ld Hz)\n",CFM_CLK,\
+	 	CFG_CLK / (2* ((CFM_CLK & 0x3F)+1) * (1+((CFM_CLK & 0x40)>>6)*7)),\
+		CFG_CLK);
+	MCFCFM_SACC = 0;
+	MCFCFM_DACC = 0;
+
+	if (MCFCFM_SEC & MCFCFM_SEC_KEYEN)
+		puts("CFM backdoor access is enabled\n");
+	if (MCFCFM_SEC & MCFCFM_SEC_SECSTAT)
+		puts("CFM securety is enabled\n");
+
+	#ifdef CONFIG_M5281
+		info->flash_id = (FREESCALE_MANUFACT & FLASH_VENDMASK) |
+				 (FREESCALE_ID_MCF5281 & FLASH_TYPEMASK);
+		info->size = 256*1024;
+		info->sector_count = 16;
+	#else
+		info->flash_id = (FREESCALE_MANUFACT & FLASH_VENDMASK) |
+				 (FREESCALE_ID_MCF5282 & FLASH_TYPEMASK);
+		info->size = 512*1024;
+		info->sector_count = 32;
+	#endif
+	protection = MCFCFM_PROT;
+	for (sector = 0; sector < info->sector_count; sector++)
+	{
+		if (sector == 0)
+		{
+			info->start[sector] = CFG_INT_FLASH_BASE;
+		}
+		else
+		{
+			info->start[sector] = info->start[sector-1] + 0x04000;
+		}
+		info->protect[sector] = protection & 1;
+		protection >>= 1;
+	}
+}
+
+int cfm_flash_readycheck(int checkblank)
+{
+	int	rc;
+	unsigned char state;
+
+	rc	= ERR_OK;
+	while (!(MCFCFM_USTAT & MCFCFM_USTAT_CCIF));
+	state = MCFCFM_USTAT;
+	if (state & MCFCFM_USTAT_ACCERR)
+	{
+		debug ("%s(): CFM access error",__FUNCTION__);
+		rc = ERR_PROG_ERROR;
+	}
+	if (state & MCFCFM_USTAT_PVIOL)
+	{
+		debug ("%s(): CFM protection violation",__FUNCTION__);
+		rc = ERR_PROTECTED;
+	}
+	if (checkblank)
+	{
+		if (!(state & MCFCFM_USTAT_BLANK))
+		{
+			debug ("%s(): CFM erras error",__FUNCTION__);
+			rc = ERR_NOT_ERASED;
+		}
+	}
+	MCFCFM_USTAT = state & 0x34; /* reset state */
+	return rc;
+}
+
+/* Erase 16KiB = 8 2KiB pages */
+
+int cfm_flash_erase_sector (flash_info_t * info, int sector)
+{
+	ulong address;
+	int page;
+	int rc;
+	rc= ERR_OK;
+	address = cmf_backdoor_address(info->start[sector]);
+	for (page=0; (page<8) && (rc==ERR_OK); page++)
+	{
+		*(volatile __u32*) address = 0;
+		MCFCFM_CMD = MCFCFM_CMD_PGERS;
+		MCFCFM_USTAT = MCFCFM_USTAT_CBEIF;
+		rc = cfm_flash_readycheck(0);
+		if (rc==ERR_OK)
+		{
+			*(volatile __u32*) address = 0;
+			MCFCFM_CMD = MCFCFM_CMD_PGERSVER;
+			MCFCFM_USTAT = MCFCFM_USTAT_CBEIF;
+			rc = cfm_flash_readycheck(1);
+		}
+		address += 0x800;
+	}
+	return rc;
+}
+
+int cfm_flash_write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+	int rc;
+	ulong dest, data;
+
+	rc = ERR_OK;
+	if (addr & 3)
+	{
+		debug ("Byte and Word alignment not supported\n");
+		rc = ERR_ALIGN;
+	}
+	if (cnt & 3)
+	{
+		debug ("Byte and Word transfer not supported\n");
+		rc = ERR_ALIGN;
+	}
+	dest = cmf_backdoor_address(addr);
+	while ((cnt>=4) && (rc == ERR_OK))
+	{
+		data =*((volatile u32 *) src);
+		*(volatile u32*) dest = data;
+		MCFCFM_CMD = MCFCFM_CMD_PGM;
+		MCFCFM_USTAT = MCFCFM_USTAT_CBEIF;
+		rc = cfm_flash_readycheck(0);
+		if (*(volatile u32*) addr != data) rc = ERR_PROG_ERROR;
+		src +=4;
+		dest +=4;
+		addr +=4;
+		cnt -=4;
+	}
+	return rc;
+}
+
+#ifdef CFG_FLASH_PROTECTION
+
+int cfm_flash_protect(flash_info_t * info,long sector,int prot)
+{
+	int rc;
+
+	rc= ERR_OK;
+	if (prot)
+	{
+		MCFCFM_PROT |= (1<<sector);
+		info->protect[sector]=1;
+	}
+	else
+	{
+		MCFCFM_PROT &= ~(1<<sector);
+		info->protect[sector]=0;
+	}
+	return rc;
+}
+
+#endif
+
+#endif
diff --git a/board/BuS/EB+MCF-EV123/cfm_flash.h b/board/BuS/EB+MCF-EV123/cfm_flash.h
new file mode 100644
index 0000000000..cc8cdbd1eb
--- /dev/null
+++ b/board/BuS/EB+MCF-EV123/cfm_flash.h
@@ -0,0 +1,40 @@
+/*
+ * Basic Flash Driver for Freescale MCF 5282 internal FLASH
+ *
+ * (C) Copyright 2005 BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CFM_FLASH_H_
+#define __CFM_FLASH_H_
+
+#define	FREESCALE_MANUFACT 0xFACFFACF
+#define	FREESCALE_ID_MCF5281 0x5281
+#define	FREESCALE_ID_MCF5282 0x5282
+
+extern void cfm_flash_print_info (flash_info_t * info);
+extern int cfm_flash_erase_sector (flash_info_t * info, int sector);
+extern void cfm_flash_init (flash_info_t * info);
+extern int cfm_flash_write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt);
+#ifdef CFG_FLASH_PROTECTION
+extern int cfm_flash_protect(flash_info_t * info,long sector,int prot);
+#endif
+
+#endif
diff --git a/board/BuS/EB+MCF-EV123/config.mk b/board/BuS/EB+MCF-EV123/config.mk
new file mode 100644
index 0000000000..9fe2fc5dae
--- /dev/null
+++ b/board/BuS/EB+MCF-EV123/config.mk
@@ -0,0 +1,28 @@
+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+sinclude $(TOPDIR)/board/$(BOARDDIR)/textbase.mk
+ifndef TEXT_BASE
+TEXT_BASE = 0xFE000000
+endif
diff --git a/board/BuS/EB+MCF-EV123/flash.c b/board/BuS/EB+MCF-EV123/flash.c
new file mode 100644
index 0000000000..ba76bef12e
--- /dev/null
+++ b/board/BuS/EB+MCF-EV123/flash.c
@@ -0,0 +1,413 @@
+/*
+ * (C) Copyright 2005
+ * BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de>
+ *
+ * Based On
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include  "cfm_flash.h"
+
+#define PHYS_FLASH_1 CFG_FLASH_BASE
+#define FLASH_BANK_SIZE 0x200000
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+
+void flash_print_info (flash_info_t * info)
+{
+	int i;
+
+	switch (info->flash_id & FLASH_VENDMASK) {
+	case (AMD_MANUFACT & FLASH_VENDMASK):
+		printf ("AMD: ");
+		switch (info->flash_id & FLASH_TYPEMASK) {
+		case (AMD_ID_LV160B & FLASH_TYPEMASK):
+			printf ("AM29LV160B (16Bit)\n");
+			break;
+		default:
+			printf ("Unknown Chip Type\n");
+			break;
+		}
+		break;
+	case FREESCALE_MANUFACT & FLASH_VENDMASK:
+		cfm_flash_print_info (info);
+		break;
+	default:
+		printf ("Unknown Vendor ");
+		break;
+	}
+
+	puts ("  Size: ");
+	if ((info->size >> 20) > 0)
+	{
+		printf ("%ld MiB",info->size >> 20);
+	}
+	else
+	{
+		printf ("%ld KiB",info->size >> 10);
+	}
+	printf (" in %d Sectors\n", info->sector_count);
+
+	printf ("  Sector Start Addresses:");
+	for (i = 0; i < info->sector_count; i++) {
+		if ((i % 4) == 0) {
+			printf ("\n    ");
+		}
+		printf ("%02d: %08lX%s  ", i,info->start[i],
+			info->protect[i] ? " P" : "  ");
+	}
+	printf ("\n\n");
+}
+
+unsigned long flash_init (void)
+{
+	int i, j;
+	ulong size = 0;
+
+	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+		ulong flashbase = 0;
+
+		switch (i)
+		{
+		case 1:
+			flash_info[i].flash_id =
+				(AMD_MANUFACT & FLASH_VENDMASK) |
+				(AMD_ID_LV160B & FLASH_TYPEMASK);
+			flash_info[i].size = FLASH_BANK_SIZE;
+			flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
+			memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+			flashbase = PHYS_FLASH_1;
+			for (j = 0; j < flash_info[i].sector_count; j++) {
+				if (j == 0) {
+					/* 1st is 16 KiB */
+					flash_info[i].start[j] = flashbase;
+				}
+				if ((j >= 1) && (j <= 2)) {
+				/* 2nd and 3rd are 8 KiB */
+					flash_info[i].start[j] =
+						flashbase + 0x4000 + 0x2000 * (j - 1);
+				}
+				if (j == 3) {
+					/* 4th is 32 KiB */
+					flash_info[i].start[j] = flashbase + 0x8000;
+				}
+				if ((j >= 4) && (j <= 34)) {
+					/* rest is 256 KiB */
+					flash_info[i].start[j] =
+						flashbase + 0x10000 + 0x10000 * (j - 4);
+				}
+			}
+			break;
+		case 0:
+			cfm_flash_init (&flash_info[i]);
+			break;
+		default:
+			panic ("configured to many flash banks!\n");
+		}
+
+		size += flash_info[i].size;
+	}
+
+	flash_protect (FLAG_PROTECT_SET,
+		       CFG_FLASH_BASE,
+		       CFG_FLASH_BASE + 0xffff, &flash_info[0]);
+
+	return size;
+}
+
+#define CMD_READ_ARRAY		0x00F0
+#define CMD_UNLOCK1		0x00AA
+#define CMD_UNLOCK2		0x0055
+#define CMD_ERASE_SETUP		0x0080
+#define CMD_ERASE_CONFIRM	0x0030
+#define CMD_PROGRAM		0x00A0
+#define CMD_UNLOCK_BYPASS	0x0020
+
+#define MEM_FLASH_ADDR1		(*(volatile u16 *)(info->start[0] + (0x00000555<<1)))
+#define MEM_FLASH_ADDR2		(*(volatile u16 *)(info->start[0] + (0x000002AA<<1)))
+
+
+#define BIT_ERASE_DONE		0x0080
+#define BIT_RDY_MASK		0x0080
+#define BIT_PROGRAM_ERROR	0x0020
+#define BIT_TIMEOUT		0x80000000	/* our flag */
+
+#define ERR_READY -1
+
+int amd_flash_erase_sector(flash_info_t * info, int sector)
+{
+	int state;
+	ulong result;
+
+	volatile u16 *addr =
+				(volatile u16 *) (info->start[sector]);
+
+	MEM_FLASH_ADDR1 = CMD_UNLOCK1;
+	MEM_FLASH_ADDR2 = CMD_UNLOCK2;
+	MEM_FLASH_ADDR1 = CMD_ERASE_SETUP;
+
+	MEM_FLASH_ADDR1 = CMD_UNLOCK1;
+	MEM_FLASH_ADDR2 = CMD_UNLOCK2;
+	*addr = CMD_ERASE_CONFIRM;
+
+	/* wait until flash is ready */
+	state = 0;
+	set_timer (0);
+
+	do {
+		result = *addr;
+
+		/* check timeout */
+		if (get_timer (0) > CFG_FLASH_ERASE_TOUT) {
+			MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
+			state = ERR_TIMOUT;
+		}
+
+		if (!state && (result & 0xFFFF) & BIT_ERASE_DONE)
+			state = ERR_READY;
+	}
+	while (!state);
+	if (state == ERR_READY)
+		state = ERR_OK;
+
+	MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
+
+	return state;
+}
+
+int flash_erase (flash_info_t * info, int s_first, int s_last)
+{
+	int iflag, cflag;
+	int sector;
+	int rc;
+
+	rc = ERR_OK;
+
+	if (info->flash_id == FLASH_UNKNOWN)
+	{
+		rc = ERR_UNKNOWN_FLASH_TYPE;
+	} /* (info->flash_id == FLASH_UNKNOWN) */
+
+	if ((s_first < 0) || (s_first > s_last) || s_last >= info->sector_count)
+	{
+		rc = ERR_INVAL;
+	}
+
+	cflag = icache_status ();
+	icache_disable ();
+	iflag = disable_interrupts ();
+
+	for (sector = s_first; (sector <= s_last) && (rc == ERR_OK); sector++) {
+
+		if (info->protect[sector])
+		{
+			putc('P'); /*  protected sector will not erase */
+		}
+		else
+		{
+			/* erase on unprotected sector */
+			puts("E\b");
+			switch (info->flash_id & FLASH_VENDMASK)
+			{
+			case (AMD_MANUFACT & FLASH_VENDMASK):
+				rc = amd_flash_erase_sector(info,sector);
+				break;
+			case (FREESCALE_MANUFACT & FLASH_VENDMASK):
+				rc = cfm_flash_erase_sector(info,sector);
+				break;
+			default:
+				return ERR_UNKNOWN_FLASH_VENDOR;
+			}
+			putc('.');
+		}
+	}
+	if (rc!=ERR_OK)
+	{
+		printf ("\n   ");
+		flash_perror (rc);
+	}
+	else
+	{
+		printf (" done\n");
+	}
+
+	udelay (10000);	/* allow flash to settle - wait 10 ms */
+
+	if (iflag)
+		enable_interrupts ();
+
+	if (cflag)
+  		icache_enable ();
+
+	return rc;
+}
+
+volatile static int amd_write_word (flash_info_t * info, ulong dest, u16 data)
+{
+	volatile u16 *addr;
+	ulong result;
+	int cflag, iflag;
+	int state;
+
+	/*
+	 * Check if Flash is (sufficiently) erased
+	 */
+	addr = (volatile u16 *) dest;
+
+	result = *addr;
+	if ((result & data) != data)
+		return ERR_NOT_ERASED;
+
+	/*
+	 * Disable interrupts which might cause a timeout
+	 * here. Remember that our exception vectors are
+	 * at address 0 in the flash, and we don't want a
+	 * (ticker) exception to happen while the flash
+	 * chip is in programming mode.
+	 */
+
+	cflag = icache_status ();
+	icache_disable ();
+	iflag = disable_interrupts ();
+
+	MEM_FLASH_ADDR1 = CMD_UNLOCK1;
+	MEM_FLASH_ADDR2 = CMD_UNLOCK2;
+	MEM_FLASH_ADDR1 = CMD_PROGRAM;
+	*addr = data;
+
+	/* arm simple, non interrupt dependent timer */
+	set_timer (0);
+
+	/* wait until flash is ready */
+	state = 0;
+	do {
+		result = *addr;
+
+		/* check timeout */
+		if (get_timer (0) > CFG_FLASH_ERASE_TOUT) {
+				state = ERR_TIMOUT;
+		}
+		if (!state && ((result & BIT_RDY_MASK) == (data & BIT_RDY_MASK)))
+			state = ERR_READY;
+
+	} while (!state);
+
+	*addr = CMD_READ_ARRAY;
+
+	if (state == ERR_READY)
+		state = ERR_OK;
+	if ((*addr != data) && (state != ERR_TIMOUT))
+		state = ERR_PROG_ERROR;
+
+	if (iflag)
+		enable_interrupts ();
+
+	if (cflag)
+		icache_enable ();
+
+	return state;
+}
+
+int amd_flash_write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+	int rc;
+	ulong dest;
+	u16 data;
+
+	rc = ERR_OK;
+	if (addr & 1)
+	{
+		debug ("Byte alignment not supported\n");
+		rc = ERR_ALIGN;
+	}
+	if (cnt & 1)
+	{
+		debug ("Byte transfer not supported\n");
+		rc = ERR_ALIGN;
+	}
+
+	dest = addr;
+	while ((cnt>=2) && (rc == ERR_OK))
+	{
+		data =*((volatile u16 *) src);
+		rc=amd_write_word (info,dest,data);
+		src +=2;
+		dest +=2;
+		cnt -=2;
+	}
+	return rc;
+}
+
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+	int rc;
+
+	switch (info->flash_id & FLASH_VENDMASK)
+	{
+		case (AMD_MANUFACT & FLASH_VENDMASK):
+			rc = amd_flash_write_buff(info,src,addr,cnt);
+			break;
+		case (FREESCALE_MANUFACT & FLASH_VENDMASK):
+			rc = cfm_flash_write_buff(info,src,addr,cnt);
+			break;
+		default:
+			rc = ERR_UNKNOWN_FLASH_VENDOR;
+	}
+	return rc;
+
+}
+int amd_flash_protect(flash_info_t * info,long sector,int prot)
+{
+	int rc;
+	rc= ERR_OK;
+	if (prot)
+	{
+		info->protect[sector]=1;
+	}
+	else
+	{
+		info->protect[sector]=0;
+	}
+	return rc;
+}
+
+#ifdef CFG_FLASH_PROTECTION
+
+int flash_real_protect(flash_info_t * info,long sector,int prot)
+{
+	int rc;
+
+	switch (info->flash_id & FLASH_VENDMASK)
+	{
+		case (AMD_MANUFACT & FLASH_VENDMASK):
+			rc = amd_flash_protect(info,sector,prot);
+			break;
+		case (FREESCALE_MANUFACT & FLASH_VENDMASK):
+			rc = cfm_flash_protect(info,sector,prot);
+			break;
+		default:
+			rc = ERR_UNKNOWN_FLASH_VENDOR;
+	}
+	return rc;
+}
+
+#endif
diff --git a/board/BuS/EB+MCF-EV123/textbase.mk b/board/BuS/EB+MCF-EV123/textbase.mk
new file mode 100644
index 0000000000..10106f4585
--- /dev/null
+++ b/board/BuS/EB+MCF-EV123/textbase.mk
@@ -0,0 +1 @@
+TEXT_BASE = 0xF0000000
diff --git a/board/BuS/EB+MCF-EV123/u-boot.lds b/board/BuS/EB+MCF-EV123/u-boot.lds
new file mode 100644
index 0000000000..d790018d2d
--- /dev/null
+++ b/board/BuS/EB+MCF-EV123/u-boot.lds
@@ -0,0 +1,141 @@
+/*
+ * (C) Copyright 2000-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(m68k)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/mcf52x2/start.o	(.text)
+    common/dlmalloc.o	(.text)
+    lib_generic/string.o	(.text)
+    lib_generic/vsprintf.o	(.text)
+    lib_generic/crc32.o	(.text)
+    lib_generic/zlib.o	(.text)
+
+/*    . = env_offset; */
+    common/environment.o(.text)
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+    .reloc   :
+  {
+    __got_start = .;
+    *(.got)
+    __got_end = .;
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   _sbss = .;
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+   . = ALIGN(4);
+   _ebss = .;
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
diff --git a/board/MAI/bios_emulator/scitech/src/pm/win32/event.c b/board/MAI/bios_emulator/scitech/src/pm/win32/event.c
index 86448e32fa..6388052ce7 100644
--- a/board/MAI/bios_emulator/scitech/src/pm/win32/event.c
+++ b/board/MAI/bios_emulator/scitech/src/pm/win32/event.c
@@ -147,14 +147,14 @@ void _EVT_pumpMessages(void)
 		if (EVT.oldMove != -1) {
 		    EVT.evtq[EVT.oldMove].where_x = evt.where_x;/* Modify existing one  */
 		    EVT.evtq[EVT.oldMove].where_y = evt.where_y;
-/*                  EVT.evtq[EVT.oldMove].relative_x += mickeyX;    // TODO! */
-/*                  EVT.evtq[EVT.oldMove].relative_y += mickeyY;    // TODO! */
+/*                  EVT.evtq[EVT.oldMove].relative_x += mickeyX;    / / TODO! */
+/*                  EVT.evtq[EVT.oldMove].relative_y += mickeyY;    / / TODO! */
 		    evt.what = 0;
 		    }
 		else {
 		    EVT.oldMove = EVT.freeHead; /* Save id of this move event   */
-/*                  evt.relative_x = mickeyX;    // TODO! */
-/*                  evt.relative_y = mickeyY;    // TODO! */
+/*                  evt.relative_x = mickeyX;    / / TODO! */
+/*                  evt.relative_y = mickeyY;    / / TODO! */
 		    }
 		}
 	    else
diff --git a/board/Marvell/include/core.h b/board/Marvell/include/core.h
index 081d5fd678..c41343919e 100644
--- a/board/Marvell/include/core.h
+++ b/board/Marvell/include/core.h
@@ -91,7 +91,10 @@ extern unsigned int INTERNAL_REG_BASE_ADDR;
 #define _1G		0x40000000
 #define _2G		0x80000000
 
+#ifndef	BOOL_WAS_DEFINED
+#define BOOL_WAS_DEFINED
 typedef enum _bool{false,true} bool;
+#endif
 
 /* Little to Big endian conversion macros */
 
diff --git a/board/altera/common/AMDLV065D.c b/board/altera/common/AMDLV065D.c
new file mode 100644
index 0000000000..8a7b14ee2f
--- /dev/null
+++ b/board/altera/common/AMDLV065D.c
@@ -0,0 +1,190 @@
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <common.h>
+#if defined(CONFIG_NIOS)
+#include <nios.h>
+#else
+#include <asm/io.h>
+#endif
+
+#define SECTSZ		(64 * 1024)
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+
+/*----------------------------------------------------------------------*/
+unsigned long flash_init (void)
+{
+	int i;
+	unsigned long addr;
+	flash_info_t *fli = &flash_info[0];
+
+	fli->size = CFG_FLASH_SIZE;
+	fli->sector_count = CFG_MAX_FLASH_SECT;
+	fli->flash_id = FLASH_MAN_AMD + FLASH_AMDLV065D;
+
+	addr = CFG_FLASH_BASE;
+	for (i = 0; i < fli->sector_count; ++i) {
+		fli->start[i] = addr;
+		addr += SECTSZ;
+		fli->protect[i] = 1;
+	}
+
+	return (CFG_FLASH_SIZE);
+}
+/*--------------------------------------------------------------------*/
+void flash_print_info (flash_info_t * info)
+{
+	int i, k;
+	int erased;
+	unsigned long *addr;
+
+	printf ("  Size: %ld KB in %d Sectors\n",
+		info->size >> 10, info->sector_count);
+	printf ("  Sector Start Addresses:");
+	for (i = 0; i < info->sector_count; ++i) {
+
+		/* Check if whole sector is erased */
+		erased = 1;
+		addr = (unsigned long *) info->start[i];
+		for (k = 0; k < SECTSZ/sizeof(unsigned long); k++) {
+			if ( readl(addr++) != (unsigned long)-1) {
+				erased = 0;
+				break;
+			}
+		}
+
+		/* Print the info */
+		if ((i % 5) == 0)
+			printf ("\n   ");
+		printf (" %08lX%s%s",
+			info->start[i],
+			erased ? " E" : "  ",
+			info->protect[i] ? "RO " : "   ");
+	}
+	printf ("\n");
+}
+
+/*-------------------------------------------------------------------*/
+
+
+int flash_erase (flash_info_t * info, int s_first, int s_last)
+{
+	unsigned char *addr = (unsigned char *) info->start[0];
+	unsigned char *addr2;
+	int prot, sect;
+	ulong start;
+
+	/* Some sanity checking */
+	if ((s_first < 0) || (s_first > s_last)) {
+		printf ("- no sectors to erase\n");
+		return 1;
+	}
+
+	prot = 0;
+	for (sect = s_first; sect <= s_last; ++sect) {
+		if (info->protect[sect]) {
+			prot++;
+		}
+	}
+	if (prot) {
+		printf ("- Warning: %d protected sectors will not be erased!\n",
+			prot);
+	} else {
+		printf ("\n");
+	}
+
+	/* It's ok to erase multiple sectors provided we don't delay more
+	 * than 50 usec between cmds ... at which point the erase time-out
+	 * occurs. So don't go and put printf() calls in the loop ... it
+	 * won't be very helpful ;-)
+	 */
+	for (sect = s_first; sect <= s_last; sect++) {
+		if (info->protect[sect] == 0) {	/* not protected */
+			addr2 = (unsigned char *) info->start[sect];
+			writeb (addr, 0xaa);
+			writeb (addr,  0x55);
+			writeb (addr,  0x80);
+			writeb (addr,  0xaa);
+			writeb (addr,  0x55);
+			writeb (addr2, 0x30);
+			/* Now just wait for 0xff & provide some user
+			 * feedback while we wait.
+			 */
+			start = get_timer (0);
+			while ( readb (addr2) != 0xff) {
+				udelay (1000 * 1000);
+				putc ('.');
+				if (get_timer (start) > CFG_FLASH_ERASE_TOUT) {
+					printf ("timeout\n");
+					return 1;
+				}
+			}
+		}
+	}
+	printf ("\n");
+	return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+
+	vu_char *cmd = (vu_char *) info->start[0];
+	vu_char *dst = (vu_char *) addr;
+	unsigned char b;
+	ulong start;
+
+	while (cnt) {
+		/* Check for sufficient erase */
+		b = *src;
+		if ((readb (dst) & b) != b) {
+			printf ("%02x : %02x\n", readb (dst), b);
+			return (2);
+		}
+
+		writeb (cmd,  0xaa);
+		writeb (cmd,  0x55);
+		writeb (cmd,  0xa0);
+		writeb (dst, b);
+
+		/* Verify write */
+		start = get_timer (0);
+		while (readb (dst) != b) {
+			if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+				return 1;
+			}
+		}
+		dst++;
+		src++;
+		cnt--;
+	}
+
+	return (0);
+}
diff --git a/board/altera/common/epled.c b/board/altera/common/epled.c
new file mode 100644
index 0000000000..c75fe8c573
--- /dev/null
+++ b/board/altera/common/epled.c
@@ -0,0 +1,62 @@
+/*
+ * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <nios2-io.h>
+#include <status_led.h>
+
+/* The LED port is configured as output only, so we
+ * must track the state manually.
+ */
+static led_id_t val = 0;
+
+void __led_init (led_id_t mask, int state)
+{
+	nios_pio_t *pio = (nios_pio_t *)CFG_LEDPIO_ADDR;
+
+	if (state == STATUS_LED_ON)
+		val &= ~mask;
+	else
+		val |= mask;
+	writel (&pio->data, val);
+}
+
+void __led_set (led_id_t mask, int state)
+{
+	nios_pio_t *pio = (nios_pio_t *)CFG_LEDPIO_ADDR;
+
+	if (state == STATUS_LED_ON)
+		val &= ~mask;
+	else
+		val |= mask;
+	writel (&pio->data, val);
+}
+
+void __led_toggle (led_id_t mask)
+{
+	nios_pio_t *pio = (nios_pio_t *)CFG_LEDPIO_ADDR;
+
+	val ^= mask;
+	writel (&pio->data, val);
+}
diff --git a/board/altera/ep1c20/Makefile b/board/altera/ep1c20/Makefile
new file mode 100644
index 0000000000..a92b258339
--- /dev/null
+++ b/board/altera/ep1c20/Makefile
@@ -0,0 +1,50 @@
+#
+# (C) Copyright 2001-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+COMOBJS := ../common/AMDLV065D.o ../common/epled.o
+
+OBJS	:= $(BOARD).o $(COMOBJS)
+
+SOBJS	=
+
+$(LIB): $(OBJS) $(SOBJS)
+	$(AR) crv $@ $^
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
diff --git a/board/altera/ep1c20/config.mk b/board/altera/ep1c20/config.mk
new file mode 100644
index 0000000000..dab2740830
--- /dev/null
+++ b/board/altera/ep1c20/config.mk
@@ -0,0 +1,31 @@
+#
+# (C) Copyright 2005, Psyent Corporation <www.psyent.com>
+# Scott McNutt <smcnutt@psyent.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+TEXT_BASE = 0x01fc0000
+
+PLATFORM_CPPFLAGS += -mno-hw-div -mno-hw-mul
+PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(VENDOR)/include
+
+ifeq ($(debug),1)
+PLATFORM_CPPFLAGS += -DDEBUG
+endif
diff --git a/board/altera/ep1c20/ep1c20.c b/board/altera/ep1c20/ep1c20.c
new file mode 100644
index 0000000000..29491391ef
--- /dev/null
+++ b/board/altera/ep1c20/ep1c20.c
@@ -0,0 +1,40 @@
+/*
+ * (C) Copyright 2005, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+int board_early_init_f (void)
+{
+	return 0;
+}
+
+int checkboard (void)
+{
+	puts ("BOARD : Altera EP-1C20\n");
+	return 0;
+}
+
+long int initdram (int board_type)
+{
+	return (0);
+}
diff --git a/board/altera/ep1c20/u-boot.lds b/board/altera/ep1c20/u-boot.lds
new file mode 100644
index 0000000000..b99b82c826
--- /dev/null
+++ b/board/altera/ep1c20/u-boot.lds
@@ -0,0 +1,136 @@
+/*
+ * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+OUTPUT_FORMAT("elf32-littlenios2")
+OUTPUT_ARCH(nios2)
+ENTRY(_start)
+
+SECTIONS
+{
+	.text :
+	{
+	  cpu/nios2/start.o (.text)
+	  *(.text)
+	  *(.text.*)
+	  *(.gnu.linkonce.t*)
+	  *(.rodata)
+	  *(.rodata.*)
+	  *(.gnu.linkonce.r*)
+	}
+	. = ALIGN (4);
+	_etext = .;
+	PROVIDE (etext = .);
+
+	/* CMD TABLE - sandwich this in between text and data so
+	 * the initialization code relocates the command table as
+	 * well -- admittedly, this is just pure laziness ;-)
+	 */
+	__u_boot_cmd_start = .;
+	.u_boot_cmd :
+	{
+	  *(.u_boot_cmd)
+	}
+	. = ALIGN(4);
+	__u_boot_cmd_end = .;
+
+	/* INIT DATA sections - "Small" data (see the gcc -G option)
+	 * is always gp-relative. Here we make all init data sections
+	 * adjacent to simplify the startup code -- and provide
+	 * the global pointer for gp-relative access.
+	 */
+	_data = .;
+	.data :
+	{
+	  *(.data)
+	  *(.data.*)
+	  *(.gnu.linkonce.d*)
+	}
+
+	. = ALIGN(16);
+	_gp = .;			/* Global pointer addr */
+	PROVIDE (gp = .);
+
+	.sdata :
+	{
+	  *(.sdata)
+	  *(.sdata.*)
+	  *(.gnu.linkonce.s.*)
+	}
+	. = ALIGN(4);
+
+	_edata = .;
+	PROVIDE (edata = .);
+
+	/* UNINIT DATA - Small uninitialized data is first so it's
+	 * adjacent to sdata and can be referenced via gp. The normal
+	 * bss follows. We keep it adjacent to simplify init code.
+	 */
+	__bss_start = .;
+	.sbss :
+	{
+	  *(.sbss)
+	  *(.sbss.*)
+	  *(.gnu.linkonce.sb.*)
+	  *(.scommon)
+	}
+	. = ALIGN(4);
+	.bss :
+	{
+	  *(.bss)
+	  *(.bss.*)
+	  *(.dynbss)
+	  *(COMMON)
+	  *(.scommon)
+	}
+	. = ALIGN(4);
+	_end = .;
+	PROVIDE (end = .);
+
+	/* DEBUG -- symbol table, string table, etc. etc.
+	 */
+	.stab 0 : { *(.stab) }
+	.stabstr 0 : { *(.stabstr) }
+	.stab.excl 0 : { *(.stab.excl) }
+	.stab.exclstr 0 : { *(.stab.exclstr) }
+	.stab.index 0 : { *(.stab.index) }
+	.stab.indexstr 0 : { *(.stab.indexstr) }
+	.comment 0 : { *(.comment) }
+	.debug		0 : { *(.debug) }
+	.line		0 : { *(.line) }
+	.debug_srcinfo	0 : { *(.debug_srcinfo) }
+	.debug_sfnames	0 : { *(.debug_sfnames) }
+	.debug_aranges	0 : { *(.debug_aranges) }
+	.debug_pubnames 0 : { *(.debug_pubnames) }
+	.debug_info	0 : { *(.debug_info) }
+	.debug_abbrev	0 : { *(.debug_abbrev) }
+	.debug_line	0 : { *(.debug_line) }
+	.debug_frame	0 : { *(.debug_frame) }
+	.debug_str	0 : { *(.debug_str) }
+	.debug_loc	0 : { *(.debug_loc) }
+	.debug_macinfo	0 : { *(.debug_macinfo) }
+	.debug_weaknames 0 : { *(.debug_weaknames) }
+	.debug_funcnames 0 : { *(.debug_funcnames) }
+	.debug_typenames 0 : { *(.debug_typenames) }
+	.debug_varnames	 0 : { *(.debug_varnames) }
+}
diff --git a/board/altera/ep1s10/Makefile b/board/altera/ep1s10/Makefile
new file mode 100644
index 0000000000..a92b258339
--- /dev/null
+++ b/board/altera/ep1s10/Makefile
@@ -0,0 +1,50 @@
+#
+# (C) Copyright 2001-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+COMOBJS := ../common/AMDLV065D.o ../common/epled.o
+
+OBJS	:= $(BOARD).o $(COMOBJS)
+
+SOBJS	=
+
+$(LIB): $(OBJS) $(SOBJS)
+	$(AR) crv $@ $^
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
diff --git a/board/altera/ep1s10/config.mk b/board/altera/ep1s10/config.mk
new file mode 100644
index 0000000000..dab2740830
--- /dev/null
+++ b/board/altera/ep1s10/config.mk
@@ -0,0 +1,31 @@
+#
+# (C) Copyright 2005, Psyent Corporation <www.psyent.com>
+# Scott McNutt <smcnutt@psyent.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+TEXT_BASE = 0x01fc0000
+
+PLATFORM_CPPFLAGS += -mno-hw-div -mno-hw-mul
+PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(VENDOR)/include
+
+ifeq ($(debug),1)
+PLATFORM_CPPFLAGS += -DDEBUG
+endif
diff --git a/board/altera/ep1s10/ep1s10.c b/board/altera/ep1s10/ep1s10.c
new file mode 100644
index 0000000000..9c7e28e68c
--- /dev/null
+++ b/board/altera/ep1s10/ep1s10.c
@@ -0,0 +1,40 @@
+/*
+ * (C) Copyright 2005, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+int board_early_init_f (void)
+{
+	return 0;
+}
+
+int checkboard (void)
+{
+	puts ("BOARD : Altera EP-1S10\n");
+	return 0;
+}
+
+long int initdram (int board_type)
+{
+	return (0);
+}
diff --git a/board/altera/ep1s10/u-boot.lds b/board/altera/ep1s10/u-boot.lds
new file mode 100644
index 0000000000..b99b82c826
--- /dev/null
+++ b/board/altera/ep1s10/u-boot.lds
@@ -0,0 +1,136 @@
+/*
+ * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+OUTPUT_FORMAT("elf32-littlenios2")
+OUTPUT_ARCH(nios2)
+ENTRY(_start)
+
+SECTIONS
+{
+	.text :
+	{
+	  cpu/nios2/start.o (.text)
+	  *(.text)
+	  *(.text.*)
+	  *(.gnu.linkonce.t*)
+	  *(.rodata)
+	  *(.rodata.*)
+	  *(.gnu.linkonce.r*)
+	}
+	. = ALIGN (4);
+	_etext = .;
+	PROVIDE (etext = .);
+
+	/* CMD TABLE - sandwich this in between text and data so
+	 * the initialization code relocates the command table as
+	 * well -- admittedly, this is just pure laziness ;-)
+	 */
+	__u_boot_cmd_start = .;
+	.u_boot_cmd :
+	{
+	  *(.u_boot_cmd)
+	}
+	. = ALIGN(4);
+	__u_boot_cmd_end = .;
+
+	/* INIT DATA sections - "Small" data (see the gcc -G option)
+	 * is always gp-relative. Here we make all init data sections
+	 * adjacent to simplify the startup code -- and provide
+	 * the global pointer for gp-relative access.
+	 */
+	_data = .;
+	.data :
+	{
+	  *(.data)
+	  *(.data.*)
+	  *(.gnu.linkonce.d*)
+	}
+
+	. = ALIGN(16);
+	_gp = .;			/* Global pointer addr */
+	PROVIDE (gp = .);
+
+	.sdata :
+	{
+	  *(.sdata)
+	  *(.sdata.*)
+	  *(.gnu.linkonce.s.*)
+	}
+	. = ALIGN(4);
+
+	_edata = .;
+	PROVIDE (edata = .);
+
+	/* UNINIT DATA - Small uninitialized data is first so it's
+	 * adjacent to sdata and can be referenced via gp. The normal
+	 * bss follows. We keep it adjacent to simplify init code.
+	 */
+	__bss_start = .;
+	.sbss :
+	{
+	  *(.sbss)
+	  *(.sbss.*)
+	  *(.gnu.linkonce.sb.*)
+	  *(.scommon)
+	}
+	. = ALIGN(4);
+	.bss :
+	{
+	  *(.bss)
+	  *(.bss.*)
+	  *(.dynbss)
+	  *(COMMON)
+	  *(.scommon)
+	}
+	. = ALIGN(4);
+	_end = .;
+	PROVIDE (end = .);
+
+	/* DEBUG -- symbol table, string table, etc. etc.
+	 */
+	.stab 0 : { *(.stab) }
+	.stabstr 0 : { *(.stabstr) }
+	.stab.excl 0 : { *(.stab.excl) }
+	.stab.exclstr 0 : { *(.stab.exclstr) }
+	.stab.index 0 : { *(.stab.index) }
+	.stab.indexstr 0 : { *(.stab.indexstr) }
+	.comment 0 : { *(.comment) }
+	.debug		0 : { *(.debug) }
+	.line		0 : { *(.line) }
+	.debug_srcinfo	0 : { *(.debug_srcinfo) }
+	.debug_sfnames	0 : { *(.debug_sfnames) }
+	.debug_aranges	0 : { *(.debug_aranges) }
+	.debug_pubnames 0 : { *(.debug_pubnames) }
+	.debug_info	0 : { *(.debug_info) }
+	.debug_abbrev	0 : { *(.debug_abbrev) }
+	.debug_line	0 : { *(.debug_line) }
+	.debug_frame	0 : { *(.debug_frame) }
+	.debug_str	0 : { *(.debug_str) }
+	.debug_loc	0 : { *(.debug_loc) }
+	.debug_macinfo	0 : { *(.debug_macinfo) }
+	.debug_weaknames 0 : { *(.debug_weaknames) }
+	.debug_funcnames 0 : { *(.debug_funcnames) }
+	.debug_typenames 0 : { *(.debug_typenames) }
+	.debug_varnames	 0 : { *(.debug_varnames) }
+}
diff --git a/board/altera/ep1s40/Makefile b/board/altera/ep1s40/Makefile
new file mode 100644
index 0000000000..a92b258339
--- /dev/null
+++ b/board/altera/ep1s40/Makefile
@@ -0,0 +1,50 @@
+#
+# (C) Copyright 2001-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+COMOBJS := ../common/AMDLV065D.o ../common/epled.o
+
+OBJS	:= $(BOARD).o $(COMOBJS)
+
+SOBJS	=
+
+$(LIB): $(OBJS) $(SOBJS)
+	$(AR) crv $@ $^
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
diff --git a/board/altera/ep1s40/config.mk b/board/altera/ep1s40/config.mk
new file mode 100644
index 0000000000..dab2740830
--- /dev/null
+++ b/board/altera/ep1s40/config.mk
@@ -0,0 +1,31 @@
+#
+# (C) Copyright 2005, Psyent Corporation <www.psyent.com>
+# Scott McNutt <smcnutt@psyent.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+TEXT_BASE = 0x01fc0000
+
+PLATFORM_CPPFLAGS += -mno-hw-div -mno-hw-mul
+PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(VENDOR)/include
+
+ifeq ($(debug),1)
+PLATFORM_CPPFLAGS += -DDEBUG
+endif
diff --git a/board/altera/ep1s40/ep1s40.c b/board/altera/ep1s40/ep1s40.c
new file mode 100644
index 0000000000..cb75550476
--- /dev/null
+++ b/board/altera/ep1s40/ep1s40.c
@@ -0,0 +1,35 @@
+/*
+ * (C) Copyright 2005, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+int checkboard (void)
+{
+	puts ("BOARD : Altera EP-1S40\n");
+	return 0;
+}
+
+long int initdram (int board_type)
+{
+	return (0);
+}
diff --git a/board/altera/ep1s40/u-boot.lds b/board/altera/ep1s40/u-boot.lds
new file mode 100644
index 0000000000..b99b82c826
--- /dev/null
+++ b/board/altera/ep1s40/u-boot.lds
@@ -0,0 +1,136 @@
+/*
+ * (C) Copyright 2004, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+OUTPUT_FORMAT("elf32-littlenios2")
+OUTPUT_ARCH(nios2)
+ENTRY(_start)
+
+SECTIONS
+{
+	.text :
+	{
+	  cpu/nios2/start.o (.text)
+	  *(.text)
+	  *(.text.*)
+	  *(.gnu.linkonce.t*)
+	  *(.rodata)
+	  *(.rodata.*)
+	  *(.gnu.linkonce.r*)
+	}
+	. = ALIGN (4);
+	_etext = .;
+	PROVIDE (etext = .);
+
+	/* CMD TABLE - sandwich this in between text and data so
+	 * the initialization code relocates the command table as
+	 * well -- admittedly, this is just pure laziness ;-)
+	 */
+	__u_boot_cmd_start = .;
+	.u_boot_cmd :
+	{
+	  *(.u_boot_cmd)
+	}
+	. = ALIGN(4);
+	__u_boot_cmd_end = .;
+
+	/* INIT DATA sections - "Small" data (see the gcc -G option)
+	 * is always gp-relative. Here we make all init data sections
+	 * adjacent to simplify the startup code -- and provide
+	 * the global pointer for gp-relative access.
+	 */
+	_data = .;
+	.data :
+	{
+	  *(.data)
+	  *(.data.*)
+	  *(.gnu.linkonce.d*)
+	}
+
+	. = ALIGN(16);
+	_gp = .;			/* Global pointer addr */
+	PROVIDE (gp = .);
+
+	.sdata :
+	{
+	  *(.sdata)
+	  *(.sdata.*)
+	  *(.gnu.linkonce.s.*)
+	}
+	. = ALIGN(4);
+
+	_edata = .;
+	PROVIDE (edata = .);
+
+	/* UNINIT DATA - Small uninitialized data is first so it's
+	 * adjacent to sdata and can be referenced via gp. The normal
+	 * bss follows. We keep it adjacent to simplify init code.
+	 */
+	__bss_start = .;
+	.sbss :
+	{
+	  *(.sbss)
+	  *(.sbss.*)
+	  *(.gnu.linkonce.sb.*)
+	  *(.scommon)
+	}
+	. = ALIGN(4);
+	.bss :
+	{
+	  *(.bss)
+	  *(.bss.*)
+	  *(.dynbss)
+	  *(COMMON)
+	  *(.scommon)
+	}
+	. = ALIGN(4);
+	_end = .;
+	PROVIDE (end = .);
+
+	/* DEBUG -- symbol table, string table, etc. etc.
+	 */
+	.stab 0 : { *(.stab) }
+	.stabstr 0 : { *(.stabstr) }
+	.stab.excl 0 : { *(.stab.excl) }
+	.stab.exclstr 0 : { *(.stab.exclstr) }
+	.stab.index 0 : { *(.stab.index) }
+	.stab.indexstr 0 : { *(.stab.indexstr) }
+	.comment 0 : { *(.comment) }
+	.debug		0 : { *(.debug) }
+	.line		0 : { *(.line) }
+	.debug_srcinfo	0 : { *(.debug_srcinfo) }
+	.debug_sfnames	0 : { *(.debug_sfnames) }
+	.debug_aranges	0 : { *(.debug_aranges) }
+	.debug_pubnames 0 : { *(.debug_pubnames) }
+	.debug_info	0 : { *(.debug_info) }
+	.debug_abbrev	0 : { *(.debug_abbrev) }
+	.debug_line	0 : { *(.debug_line) }
+	.debug_frame	0 : { *(.debug_frame) }
+	.debug_str	0 : { *(.debug_str) }
+	.debug_loc	0 : { *(.debug_loc) }
+	.debug_macinfo	0 : { *(.debug_macinfo) }
+	.debug_weaknames 0 : { *(.debug_weaknames) }
+	.debug_funcnames 0 : { *(.debug_funcnames) }
+	.debug_typenames 0 : { *(.debug_typenames) }
+	.debug_varnames	 0 : { *(.debug_varnames) }
+}
diff --git a/board/amcc/bamboo/bamboo.c b/board/amcc/bamboo/bamboo.c
index 7c989200fe..c93ba6e3ca 100644
--- a/board/amcc/bamboo/bamboo.c
+++ b/board/amcc/bamboo/bamboo.c
@@ -435,7 +435,7 @@ long int initdram (int board_type)
 	 */
 	init_spd_array();
 
-	dram_size = spd_sdram (0);
+	dram_size = spd_sdram();
 
 	return dram_size;
 }
diff --git a/board/amcc/bamboo/bamboo.h b/board/amcc/bamboo/bamboo.h
index 5f5fcde825..1ce6366da4 100644
--- a/board/amcc/bamboo/bamboo.h
+++ b/board/amcc/bamboo/bamboo.h
@@ -283,10 +283,8 @@
 /*----------------------------------------------------------------------------+
   | PPC440EP GPIOs addresses.
   +----------------------------------------------------------------------------*/
-#define GPIO0_BASE	 0xEF600B00
 #define GPIO0_REAL	 0xEF600B00
 
-#define GPIO1_BASE	 0xEF600C00
 #define GPIO1_REAL	 0xEF600C00
 
 /* Offsets */
@@ -332,17 +330,6 @@
 
 
 /*----------------------------------------------------------------------------+
-  | Declare Configuration values
-  +----------------------------------------------------------------------------*/
-typedef enum gpio_select { GPIO_SEL, GPIO_ALT1, GPIO_ALT2, GPIO_ALT3 } gpio_select_t;
-typedef enum gpio_driver { GPIO_DIS, GPIO_IN, GPIO_OUT, GPIO_BI } gpio_driver_t;
-
-typedef struct { unsigned long	add;	/* gpio core base address */
-	gpio_driver_t  in_out; /* Driver Setting */
-	gpio_select_t  alt_nb; /* Selected Alternate */
-} gpio_param_s;
-
-/*----------------------------------------------------------------------------+
   |			XX     XX
   |
   | XXXXXX   XXX XX    XXX    XXX
diff --git a/board/amcc/bamboo/config.mk b/board/amcc/bamboo/config.mk
index 35cb65584a..9d7f4c3105 100644
--- a/board/amcc/bamboo/config.mk
+++ b/board/amcc/bamboo/config.mk
@@ -1,5 +1,5 @@
 #
-# (C) Copyright 2002
+# (C) Copyright 2002-2006
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
 # See file CREDITS for list of people who contributed to this
@@ -21,7 +21,7 @@
 # MA 02111-1307 USA
 #
 
-TEXT_BASE = 0xFFF80000
+TEXT_BASE = 0xFFFA0000
 
 PLATFORM_CPPFLAGS += -DCONFIG_440=1
 
diff --git a/board/amcc/yellowstone/yellowstone.c b/board/amcc/yellowstone/yellowstone.c
index 86d0db751d..92dc9d4c02 100644
--- a/board/amcc/yellowstone/yellowstone.c
+++ b/board/amcc/yellowstone/yellowstone.c
@@ -313,13 +313,13 @@ void sdram_init(void)
 	mtsdram(mem_tr0, 0x410a4012);	/* ?? */
 	mtsdram(mem_rtr, 0x04080000);	/* ?? */
 	mtsdram(mem_cfg1, 0x00000000);	/* Self-refresh exit, disable PM    */
-	mtsdram(mem_cfg0, 0x34000000);	/* Disable EEC */
+	mtsdram(mem_cfg0, 0x30000000);	/* Disable EEC */
 	udelay(400);		/* Delay 200 usecs (min)            */
 
 	/*--------------------------------------------------------------------
 	 * Enable the controller, then wait for DCEN to complete
 	 *------------------------------------------------------------------*/
-	mtsdram(mem_cfg0, 0x84000000);	/* Enable */
+	mtsdram(mem_cfg0, 0x80000000);	/* Enable */
 
 	for (;;) {
 		mfsdram(mem_mcsts, reg);
diff --git a/board/amcc/yosemite/yosemite.c b/board/amcc/yosemite/yosemite.c
index 674244155a..7f2e718203 100644
--- a/board/amcc/yosemite/yosemite.c
+++ b/board/amcc/yosemite/yosemite.c
@@ -309,13 +309,13 @@ void sdram_init(void)
 	mtsdram(mem_tr0, 0x410a4012);	/* ?? */
 	mtsdram(mem_rtr, 0x04080000);	/* ?? */
 	mtsdram(mem_cfg1, 0x00000000);	/* Self-refresh exit, disable PM    */
-	mtsdram(mem_cfg0, 0x34000000);	/* Disable EEC */
+	mtsdram(mem_cfg0, 0x30000000);	/* Disable EEC */
 	udelay(400);		/* Delay 200 usecs (min)            */
 
 	/*--------------------------------------------------------------------
 	 * Enable the controller, then wait for DCEN to complete
 	 *------------------------------------------------------------------*/
-	mtsdram(mem_cfg0, 0x84000000);	/* Enable */
+	mtsdram(mem_cfg0, 0x80000000);	/* Enable */
 
 	for (;;) {
 		mfsdram(mem_mcsts, reg);
diff --git a/board/amcc/yucca/Makefile b/board/amcc/yucca/Makefile
new file mode 100644
index 0000000000..c85fa3107b
--- /dev/null
+++ b/board/amcc/yucca/Makefile
@@ -0,0 +1,47 @@
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	= $(BOARD).o flash.o cmd_yucca.o
+SOBJS	= init.o
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $(OBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend *~
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/board/amcc/yucca/cmd_yucca.c b/board/amcc/yucca/cmd_yucca.c
new file mode 100644
index 0000000000..e698b201fc
--- /dev/null
+++ b/board/amcc/yucca/cmd_yucca.c
@@ -0,0 +1,288 @@
+/*
+ * (C) Copyright 2001
+ * Denis Peter, MPL AG Switzerland, d.peter@mpl.ch
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * hacked for evb440spe
+ */
+
+#include <common.h>
+#include <command.h>
+#include "yucca.h"
+#include <i2c.h>
+#include <asm/byteorder.h>
+
+extern void print_evb440spe_info(void);
+static int setBootStrapClock(cmd_tbl_t *cmdtp, int incrflag,
+		int flag, int argc, char *argv[]);
+
+extern int cmd_get_data_size(char* arg, int default_size);
+
+/* ------------------------------------------------------------------------- */
+int do_evb440spe(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	return setBootStrapClock (cmdtp, 1, flag, argc, argv);
+}
+
+/* ------------------------------------------------------------------------- */
+/* Modify memory.
+ *
+ * Syntax:
+ *	evb440spe wrclk prom0,prom1
+ */
+static int setBootStrapClock(cmd_tbl_t *cmdtp, int incrflag, int flag,
+		int argc, char *argv[])
+{
+	uchar	chip;
+	ulong	data;
+	int	nbytes;
+	extern char console_buffer[];
+
+	char sysClock[4];
+	char cpuClock[4];
+	char plbClock[4];
+	char pcixClock[4];
+
+	if (argc < 3) {
+		printf ("Usage:\n%s\n", cmdtp->usage);
+		return 1;
+	}
+
+	if (strcmp(argv[2], "prom0") == 0)
+		chip = IIC0_BOOTPROM_ADDR;
+	else
+		chip = IIC0_ALT_BOOTPROM_ADDR;
+
+	do {
+		printf("enter sys clock frequency 33 or 66 Mhz or quit to abort\n");
+		nbytes = readline (" ? ");
+
+		if (strcmp(console_buffer, "quit") == 0)
+			return 0;
+
+		if ((strcmp(console_buffer, "33") != 0) &
+				(strcmp(console_buffer, "66") != 0))
+			nbytes=0;
+
+		strcpy(sysClock, console_buffer);
+
+	} while (nbytes == 0);
+
+	do {
+		if (strcmp(sysClock, "66") == 0) {
+			printf("enter cpu clock frequency 400, 533 Mhz or quit to abort\n");
+		} else {
+#ifdef	CONFIG_STRESS
+			printf("enter cpu clock frequency 400, 500, 533, 667 Mhz or quit to abort\n");
+#else
+			printf("enter cpu clock frequency 400, 500, 533 Mhz or quit to abort\n");
+#endif
+		}
+		nbytes = readline (" ? ");
+
+		if (strcmp(console_buffer, "quit") == 0)
+			return 0;
+
+		if (strcmp(sysClock, "66") == 0) {
+			if ((strcmp(console_buffer, "400") != 0) &
+					(strcmp(console_buffer, "533") != 0)
+#ifdef	CONFIG_STRESS
+					& (strcmp(console_buffer, "667") != 0)
+#endif
+			   ) {
+				nbytes = 0;
+			}
+		} else {
+			if ((strcmp(console_buffer, "400") != 0) &
+					(strcmp(console_buffer, "500") != 0) &
+					(strcmp(console_buffer, "533") != 0)
+#ifdef	CONFIG_STRESS
+					& (strcmp(console_buffer, "667") != 0)
+#endif
+			   ) {
+				nbytes = 0;
+			}
+		}
+
+		strcpy(cpuClock, console_buffer);
+
+	} while (nbytes == 0);
+
+	if (strcmp(cpuClock, "500") == 0){
+		strcpy(plbClock, "166");
+	} else if (strcmp(cpuClock, "533") == 0){
+		strcpy(plbClock, "133");
+	} else {
+		do {
+			if (strcmp(cpuClock, "400") == 0)
+				printf("enter plb clock frequency 100, 133 Mhz or quit to abort\n");
+
+#ifdef	CONFIG_STRESS
+			if (strcmp(cpuClock, "667") == 0)
+				printf("enter plb clock frequency 133, 166 Mhz or quit to abort\n");
+
+#endif
+			nbytes = readline (" ? ");
+
+			if (strcmp(console_buffer, "quit") == 0)
+				return 0;
+
+			if (strcmp(cpuClock, "400") == 0) {
+				if ((strcmp(console_buffer, "100") != 0) &
+						(strcmp(console_buffer, "133") != 0))
+					nbytes = 0;
+			}
+#ifdef	CONFIG_STRESS
+			if (strcmp(cpuClock, "667") == 0) {
+				if ((strcmp(console_buffer, "133") != 0) &
+						(strcmp(console_buffer, "166") != 0))
+					nbytes = 0;
+			}
+#endif
+			strcpy(plbClock, console_buffer);
+
+		} while (nbytes == 0);
+	}
+
+	do {
+		printf("enter Pci-X clock frequency 33, 66, 100 or 133 Mhz or quit to abort\n");
+		nbytes = readline (" ? ");
+
+		if (strcmp(console_buffer, "quit") == 0)
+			return 0;
+
+		if ((strcmp(console_buffer, "33") != 0) &
+				(strcmp(console_buffer, "66") != 0) &
+				(strcmp(console_buffer, "100") != 0) &
+				(strcmp(console_buffer, "133") != 0)) {
+			nbytes = 0;
+		}
+		strcpy(pcixClock, console_buffer);
+
+	} while (nbytes == 0);
+
+	printf("\nsys clk   = %sMhz\n", sysClock);
+	printf("cpu clk   = %sMhz\n", cpuClock);
+	printf("plb clk   = %sMhz\n", plbClock);
+	printf("Pci-X clk = %sMhz\n", pcixClock);
+
+	do {
+		printf("\npress [y] to write I2C bootstrap \n");
+		printf("or [n] to abort.  \n");
+		printf("Don't forget to set board switches \n");
+		printf("according to your choice before re-starting \n");
+		printf("(refer to 440spe_uboot_kit_um_1_01.pdf) \n");
+
+		nbytes = readline (" ? ");
+		if (strcmp(console_buffer, "n") == 0)
+			return 0;
+
+	} while (nbytes == 0);
+
+	if (strcmp(sysClock, "33") == 0) {
+		if ((strcmp(cpuClock, "400") == 0) &
+				(strcmp(plbClock, "100") == 0))
+			data = 0x8678c206;
+
+		if ((strcmp(cpuClock, "400") == 0) &
+				(strcmp(plbClock, "133") == 0))
+			data = 0x8678c2c6;
+
+		if ((strcmp(cpuClock, "500") == 0))
+			data = 0x8778f2c6;
+
+		if ((strcmp(cpuClock, "533") == 0))
+			data = 0x87790252;
+
+#ifdef	CONFIG_STRESS
+		if ((strcmp(cpuClock, "667") == 0) &
+				(strcmp(plbClock, "133") == 0))
+			data = 0x87794256;
+
+		if ((strcmp(cpuClock, "667") == 0) &
+				(strcmp(plbClock, "166") == 0))
+			data = 0x87794206;
+
+#endif
+	}
+	if (strcmp(sysClock, "66") == 0) {
+		if ((strcmp(cpuClock, "400") == 0) &
+				(strcmp(plbClock, "100") == 0))
+			data = 0x84706206;
+
+		if ((strcmp(cpuClock, "400") == 0) &
+				(strcmp(plbClock, "133") == 0))
+			data = 0x847062c6;
+
+		if ((strcmp(cpuClock, "533") == 0))
+			data = 0x85708206;
+
+#ifdef	CONFIG_STRESS
+		if ((strcmp(cpuClock, "667") == 0) &
+				(strcmp(plbClock, "133") == 0))
+			data = 0x8570a256;
+
+		if ((strcmp(cpuClock, "667") == 0) &
+				(strcmp(plbClock, "166") == 0))
+			data = 0x8570a206;
+
+#endif
+	}
+
+#ifdef	DEBUG
+	printf(" pin strap0 to write in i2c  = %x\n", data);
+#endif	/* DEBUG */
+
+	if (i2c_write(chip, 0, 1, (uchar *)&data, 4) != 0)
+		printf("Error writing strap0 in %s\n", argv[2]);
+
+	if (strcmp(pcixClock, "33") == 0)
+		data = 0x00000701;
+
+	if (strcmp(pcixClock, "66") == 0)
+		data = 0x00000601;
+
+	if (strcmp(pcixClock, "100") == 0)
+		data = 0x00000501;
+
+	if (strcmp(pcixClock, "133") == 0)
+		data = 0x00000401;
+
+	if (strcmp(plbClock, "166") == 0)
+		data = data | 0x05950000;
+	else
+		data = data | 0x05A50000;
+
+#ifdef	DEBUG
+	printf(" pin strap1 to write in i2c  = %x\n", data);
+#endif	/* DEBUG */
+
+	udelay(1000);
+	if (i2c_write(chip, 4, 1, (uchar *)&data, 4) != 0)
+		printf("Error writing strap1 in %s\n", argv[2]);
+
+	return 0;
+}
+
+U_BOOT_CMD(
+	evb440spe,	3,	1,	do_evb440spe,
+	"evb440spe - program the serial device strap\n",
+	"wrclk [prom0|prom1] - program the serial device strap\n"
+);
diff --git a/board/amcc/yucca/config.mk b/board/amcc/yucca/config.mk
new file mode 100644
index 0000000000..ff454ebf10
--- /dev/null
+++ b/board/amcc/yucca/config.mk
@@ -0,0 +1,42 @@
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# AMCC 440SPe Reference Platform (yucca) board
+#
+
+ifeq ($(ramsym),1)
+TEXT_BASE = 0x07FD0000
+else
+TEXT_BASE = 0xfffb0000
+endif
+
+PLATFORM_CPPFLAGS += -DCONFIG_440=1
+
+ifeq ($(debug),1)
+PLATFORM_CPPFLAGS += -DDEBUG
+endif
+
+ifeq ($(dbcr),1)
+PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+endif
diff --git a/board/amcc/yucca/flash.c b/board/amcc/yucca/flash.c
new file mode 100644
index 0000000000..15b8a462ba
--- /dev/null
+++ b/board/amcc/yucca/flash.c
@@ -0,0 +1,1054 @@
+/*
+ * (C) Copyright 2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2002 Jun Gu <jung@artesyncp.com>
+ * Add support for Am29F016D and dynamic switch setting.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Modified 4/5/2001
+ * Wait for completion of each sector erase command issued
+ * 4/5/2001
+ * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+#include <ppc440.h>
+#include "yucca.h"
+
+#ifdef DEBUG
+#define DEBUGF(x...) printf(x)
+#else
+#define DEBUGF(x...)
+#endif				/* DEBUG */
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips */
+
+/*
+ * Mark big flash bank (16 bit instead of 8 bit access) in address with bit 0
+ */
+static unsigned long flash_addr_table[][CFG_MAX_FLASH_BANKS] = {
+	{0xfff00000, 0xfff80000, 0xe7c00001}, /* 0:boot from small flash */
+	{0x00000000, 0x00000000, 0x00000000}, /* 1:boot from pci 66      */
+	{0x00000000, 0x00000000, 0x00000000}, /* 2:boot from nand flash  */
+	{0xe7F00000, 0xe7F80000, 0xFFC00001}, /* 3:boot from big flash 33*/
+	{0xe7F00000, 0xe7F80000, 0xFFC00001}, /* 4:boot from big flash 66*/
+	{0x00000000, 0x00000000, 0x00000000}, /* 5:boot from             */
+	{0x00000000, 0x00000000, 0x00000000}, /* 6:boot from pci 66      */
+	{0x00000000, 0x00000000, 0x00000000}, /* 7:boot from             */
+	{0xfff00000, 0xfff80000, 0xe7c00001}, /* 8:boot from small flash */
+};
+
+/*
+ * include common flash code (for amcc boards)
+ */
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static int write_word(flash_info_t * info, ulong dest, ulong data);
+#ifdef CFG_FLASH_2ND_16BIT_DEV
+static int write_word_1(flash_info_t * info, ulong dest, ulong data);
+static int write_word_2(flash_info_t * info, ulong dest, ulong data);
+static int flash_erase_1(flash_info_t * info, int s_first, int s_last);
+static int flash_erase_2(flash_info_t * info, int s_first, int s_last);
+static ulong flash_get_size_1(vu_long * addr, flash_info_t * info);
+static ulong flash_get_size_2(vu_long * addr, flash_info_t * info);
+#endif
+
+void flash_print_info(flash_info_t * info)
+{
+	int i;
+	int k;
+	int size;
+	int erased;
+	volatile unsigned long *flash;
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		printf("missing or unknown FLASH type\n");
+		return;
+	}
+
+	switch (info->flash_id & FLASH_VENDMASK) {
+		case FLASH_MAN_AMD:
+			printf("AMD ");
+			break;
+		case FLASH_MAN_STM:
+			printf("STM ");
+			break;
+		case FLASH_MAN_FUJ:
+			printf("FUJITSU ");
+			break;
+		case FLASH_MAN_SST:
+			printf("SST ");
+			break;
+		case FLASH_MAN_MX:
+			printf("MIXC ");
+			break;
+		default:
+			printf("Unknown Vendor ");
+			break;
+	}
+
+	switch (info->flash_id & FLASH_TYPEMASK) {
+		case FLASH_AM040:
+			printf("AM29F040 (512 Kbit, uniform sector size)\n");
+			break;
+		case FLASH_AM400B:
+			printf("AM29LV400B (4 Mbit, bottom boot sect)\n");
+			break;
+		case FLASH_AM400T:
+			printf("AM29LV400T (4 Mbit, top boot sector)\n");
+			break;
+		case FLASH_AM800B:
+			printf("AM29LV800B (8 Mbit, bottom boot sect)\n");
+			break;
+		case FLASH_AM800T:
+			printf("AM29LV800T (8 Mbit, top boot sector)\n");
+			break;
+		case FLASH_AMD016:
+			printf("AM29F016D (16 Mbit, uniform sector size)\n");
+			break;
+		case FLASH_AM160B:
+			printf("AM29LV160B (16 Mbit, bottom boot sect)\n");
+			break;
+		case FLASH_AM160T:
+			printf("AM29LV160T (16 Mbit, top boot sector)\n");
+			break;
+		case FLASH_AM320B:
+			printf("AM29LV320B (32 Mbit, bottom boot sect)\n");
+			break;
+		case FLASH_AM320T:
+			printf("AM29LV320T (32 Mbit, top boot sector)\n");
+			break;
+		case FLASH_AM033C:
+			printf("AM29LV033C (32 Mbit, top boot sector)\n");
+			break;
+		case FLASH_SST800A:
+			printf("SST39LF/VF800 (8 Mbit, uniform sector size)\n");
+			break;
+		case FLASH_SST160A:
+			printf("SST39LF/VF160 (16 Mbit, uniform sector size)\n");
+			break;
+		case FLASH_STMW320DT:
+			printf ("M29W320DT (32 M, top sector)\n");
+			break;
+		case FLASH_MXLV320T:
+			printf ("MXLV320T (32 Mbit, top sector)\n");
+			break;
+		default:
+			printf("Unknown Chip Type\n");
+			break;
+	}
+
+	printf("  Size: %ld KB in %d Sectors\n",
+			info->size >> 10, info->sector_count);
+
+	printf("  Sector Start Addresses:");
+	for (i = 0; i < info->sector_count; ++i) {
+		/*
+		 * Check if whole sector is erased
+		 */
+		if (i != (info->sector_count - 1))
+			size = info->start[i + 1] - info->start[i];
+		else
+			size = info->start[0] + info->size - info->start[i];
+		erased = 1;
+		flash = (volatile unsigned long *)info->start[i];
+		size = size >> 2;	/* divide by 4 for longword access */
+		for (k = 0; k < size; k++) {
+			if (*flash++ != 0xffffffff) {
+				erased = 0;
+				break;
+			}
+		}
+
+		if ((i % 5) == 0)
+			printf("\n   ");
+		printf(" %08lX%s%s",
+				info->start[i],
+				erased ? " E" : "  ",
+				info->protect[i] ? "RO " : "   ");
+	}
+	printf("\n");
+	return;
+}
+
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+#ifdef CFG_FLASH_2ND_16BIT_DEV
+static ulong flash_get_size(vu_long * addr, flash_info_t * info)
+{
+	/* bit 0 used for big flash marking */
+	if ((ulong)addr & 0x1)
+		return flash_get_size_2((vu_long *)((ulong)addr & 0xfffffffe), info);
+	else
+		return flash_get_size_1(addr, info);
+}
+
+static ulong flash_get_size_1(vu_long * addr, flash_info_t * info)
+#else
+static ulong flash_get_size(vu_long * addr, flash_info_t * info)
+#endif
+{
+	short i;
+	CFG_FLASH_WORD_SIZE value;
+	ulong base = (ulong) addr;
+	volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) addr;
+
+	DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr);
+
+	/* Write auto select command: read Manufacturer ID */
+	addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+	addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+	addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00900090;
+	udelay(1000);
+
+	value = addr2[0];
+	DEBUGF("FLASH MANUFACT: %x\n", value);
+
+	switch (value) {
+		case (CFG_FLASH_WORD_SIZE) AMD_MANUFACT:
+			info->flash_id = FLASH_MAN_AMD;
+			break;
+		case (CFG_FLASH_WORD_SIZE) FUJ_MANUFACT:
+			info->flash_id = FLASH_MAN_FUJ;
+			break;
+		case (CFG_FLASH_WORD_SIZE) SST_MANUFACT:
+			info->flash_id = FLASH_MAN_SST;
+			break;
+		case (CFG_FLASH_WORD_SIZE) STM_MANUFACT:
+			info->flash_id = FLASH_MAN_STM;
+			break;
+		default:
+			info->flash_id = FLASH_UNKNOWN;
+			info->sector_count = 0;
+			info->size = 0;
+			return (0);	/* no or unknown flash  */
+	}
+
+	value = addr2[1];	/* device ID            */
+	DEBUGF("\nFLASH DEVICEID: %x\n", value);
+
+	switch (value) {
+		case (CFG_FLASH_WORD_SIZE) AMD_ID_LV040B:
+			info->flash_id += FLASH_AM040;
+			info->sector_count = 8;
+			info->size = 0x0080000;	/* => 512 ko */
+			break;
+
+		case (CFG_FLASH_WORD_SIZE) AMD_ID_F040B:
+			info->flash_id += FLASH_AM040;
+			info->sector_count = 8;
+			info->size = 0x0080000;	/* => 512 ko */
+			break;
+
+		case (CFG_FLASH_WORD_SIZE) STM_ID_M29W040B:
+			info->flash_id += FLASH_AM040;
+			info->sector_count = 8;
+			info->size = 0x0080000;	/* => 512 ko */
+			break;
+
+		case (CFG_FLASH_WORD_SIZE) AMD_ID_F016D:
+			info->flash_id += FLASH_AMD016;
+			info->sector_count = 32;
+			info->size = 0x00200000;
+			break;		/* => 2 MB              */
+
+		case (CFG_FLASH_WORD_SIZE) AMD_ID_LV033C:
+			info->flash_id += FLASH_AMDLV033C;
+			info->sector_count = 64;
+			info->size = 0x00400000;
+			break;		/* => 4 MB              */
+
+		case (CFG_FLASH_WORD_SIZE) AMD_ID_LV400T:
+			info->flash_id += FLASH_AM400T;
+			info->sector_count = 11;
+			info->size = 0x00080000;
+			break;		/* => 0.5 MB            */
+
+		case (CFG_FLASH_WORD_SIZE) AMD_ID_LV400B:
+			info->flash_id += FLASH_AM400B;
+			info->sector_count = 11;
+			info->size = 0x00080000;
+			break;		/* => 0.5 MB            */
+
+		case (CFG_FLASH_WORD_SIZE) AMD_ID_LV800T:
+			info->flash_id += FLASH_AM800T;
+			info->sector_count = 19;
+			info->size = 0x00100000;
+			break;		/* => 1 MB              */
+
+		case (CFG_FLASH_WORD_SIZE) AMD_ID_LV800B:
+			info->flash_id += FLASH_AM800B;
+			info->sector_count = 19;
+			info->size = 0x00100000;
+			break;		/* => 1 MB              */
+
+		case (CFG_FLASH_WORD_SIZE) AMD_ID_LV160T:
+			info->flash_id += FLASH_AM160T;
+			info->sector_count = 35;
+			info->size = 0x00200000;
+			break;		/* => 2 MB              */
+
+		case (CFG_FLASH_WORD_SIZE) AMD_ID_LV160B:
+			info->flash_id += FLASH_AM160B;
+			info->sector_count = 35;
+			info->size = 0x00200000;
+			break;		/* => 2 MB              */
+
+		default:
+			info->flash_id = FLASH_UNKNOWN;
+			return (0);	/* => no or unknown flash */
+	}
+
+	/* set up sector start address table */
+	if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
+			((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) ||
+			((info->flash_id & FLASH_TYPEMASK) == FLASH_AMD016)) {
+		for (i = 0; i < info->sector_count; i++)
+			info->start[i] = base + (i * 0x00010000);
+	} else {
+		if (info->flash_id & FLASH_BTYPE) {
+			/* set sector offsets for bottom boot block type        */
+			info->start[0] = base + 0x00000000;
+			info->start[1] = base + 0x00004000;
+			info->start[2] = base + 0x00006000;
+			info->start[3] = base + 0x00008000;
+			for (i = 4; i < info->sector_count; i++) {
+				info->start[i] =
+					base + (i * 0x00010000) - 0x00030000;
+			}
+		} else {
+			/* set sector offsets for top boot block type           */
+			i = info->sector_count - 1;
+			info->start[i--] = base + info->size - 0x00004000;
+			info->start[i--] = base + info->size - 0x00006000;
+			info->start[i--] = base + info->size - 0x00008000;
+			for (; i >= 0; i--) {
+				info->start[i] = base + i * 0x00010000;
+			}
+		}
+	}
+
+	/* check for protected sectors */
+	for (i = 0; i < info->sector_count; i++) {
+		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
+		/* D0 = 1 if protected */
+		addr2 = (volatile CFG_FLASH_WORD_SIZE *)(info->start[i]);
+
+		/* For AMD29033C flash we need to resend the command of *
+		 * reading flash protection for upper 8 Mb of flash     */
+		if (i == 32) {
+			addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA;
+			addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555;
+			addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x90909090;
+		}
+
+		if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
+			info->protect[i] = 0;
+		else
+			info->protect[i] = addr2[2] & 1;
+	}
+
+	/* issue bank reset to return to read mode */
+	addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0;
+
+	return (info->size);
+}
+
+static int wait_for_DQ7_1(flash_info_t * info, int sect)
+{
+	ulong start, now, last;
+	volatile CFG_FLASH_WORD_SIZE *addr =
+		(CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+
+	start = get_timer(0);
+	last = start;
+	while ((addr[0] & (CFG_FLASH_WORD_SIZE) 0x00800080) !=
+			(CFG_FLASH_WORD_SIZE) 0x00800080) {
+		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+			printf("Timeout\n");
+			return -1;
+		}
+		/* show that we're waiting */
+		if ((now - last) > 1000) {	/* every second */
+			putc('.');
+			last = now;
+		}
+	}
+	return 0;
+}
+
+#ifdef CFG_FLASH_2ND_16BIT_DEV
+int flash_erase(flash_info_t * info, int s_first, int s_last)
+{
+	if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) ||
+			((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320T) ||
+			((info->flash_id & FLASH_TYPEMASK) == FLASH_STMW320DT) ||
+			((info->flash_id & FLASH_TYPEMASK) == FLASH_MXLV320T)) {
+		return flash_erase_2(info, s_first, s_last);
+	} else {
+		return flash_erase_1(info, s_first, s_last);
+	}
+}
+
+static int flash_erase_1(flash_info_t * info, int s_first, int s_last)
+#else
+int flash_erase(flash_info_t * info, int s_first, int s_last)
+#endif
+{
+	volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
+	volatile CFG_FLASH_WORD_SIZE *addr2;
+	int flag, prot, sect, l_sect;
+	int i;
+
+	if ((s_first < 0) || (s_first > s_last)) {
+		if (info->flash_id == FLASH_UNKNOWN)
+			printf("- missing\n");
+		else
+			printf("- no sectors to erase\n");
+		return 1;
+	}
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		printf("Can't erase unknown flash type - aborted\n");
+		return 1;
+	}
+
+	prot = 0;
+	for (sect = s_first; sect <= s_last; ++sect) {
+		if (info->protect[sect])
+			prot++;
+	}
+
+	if (prot)
+		printf("- Warning: %d protected sectors will not be erased!", prot);
+
+	printf("\n");
+
+	l_sect = -1;
+
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts();
+
+	/* Start erase on unprotected sectors */
+	for (sect = s_first; sect <= s_last; sect++) {
+		if (info->protect[sect] == 0) {	/* not protected */
+			addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+
+			if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
+				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+				addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080;
+				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+				addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+				addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00500050;	/* block erase */
+				for (i = 0; i < 50; i++)
+					udelay(1000);	/* wait 1 ms */
+			} else {
+				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+				addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080;
+				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+				addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+				addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00300030;	/* sector erase */
+			}
+			l_sect = sect;
+			/*
+			 * Wait for each sector to complete, it's more
+			 * reliable.  According to AMD Spec, you must
+			 * issue all erase commands within a specified
+			 * timeout.  This has been seen to fail, especially
+			 * if printf()s are included (for debug)!!
+			 */
+			wait_for_DQ7_1(info, sect);
+		}
+	}
+
+	/* re-enable interrupts if necessary */
+	if (flag)
+		enable_interrupts();
+
+	/* wait at least 80us - let's wait 1 ms */
+	udelay(1000);
+
+	/* reset to read mode */
+	addr = (CFG_FLASH_WORD_SIZE *) info->start[0];
+	addr[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0;	/* reset bank */
+
+	printf(" done\n");
+	return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+	ulong cp, wp, data;
+	int i, l, rc;
+
+	wp = (addr & ~3);	/* get lower word aligned address */
+
+	/*
+	 * handle unaligned start bytes
+	 */
+	if ((l = addr - wp) != 0) {
+		data = 0;
+		for (i = 0, cp = wp; i < l; ++i, ++cp)
+			data = (data << 8) | (*(uchar *) cp);
+
+		for (; i < 4 && cnt > 0; ++i) {
+			data = (data << 8) | *src++;
+			--cnt;
+			++cp;
+		}
+
+		for (; cnt == 0 && i < 4; ++i, ++cp)
+			data = (data << 8) | (*(uchar *) cp);
+
+		if ((rc = write_word(info, wp, data)) != 0)
+			return (rc);
+
+		wp += 4;
+	}
+
+	/*
+	 * handle word aligned part
+	 */
+	while (cnt >= 4) {
+		data = 0;
+		for (i = 0; i < 4; ++i)
+			data = (data << 8) | *src++;
+
+		if ((rc = write_word(info, wp, data)) != 0)
+			return (rc);
+
+		wp += 4;
+		cnt -= 4;
+	}
+
+	if (cnt == 0)
+		return (0);
+
+	/*
+	 * handle unaligned tail bytes
+	 */
+	data = 0;
+	for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) {
+		data = (data << 8) | *src++;
+		--cnt;
+	}
+	for (; i < 4; ++i, ++cp)
+		data = (data << 8) | (*(uchar *) cp);
+
+	return (write_word(info, wp, data));
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+#ifdef CFG_FLASH_2ND_16BIT_DEV
+static int write_word(flash_info_t * info, ulong dest, ulong data)
+{
+	if (((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) ||
+			((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320T) ||
+			((info->flash_id & FLASH_TYPEMASK) == FLASH_STMW320DT) ||
+			((info->flash_id & FLASH_TYPEMASK) == FLASH_MXLV320T)) {
+		return write_word_2(info, dest, data);
+	} else {
+		return write_word_1(info, dest, data);
+	}
+}
+
+static int write_word_1(flash_info_t * info, ulong dest, ulong data)
+#else
+static int write_word(flash_info_t * info, ulong dest, ulong data)
+#endif
+{
+	volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
+	volatile CFG_FLASH_WORD_SIZE *dest2 = (CFG_FLASH_WORD_SIZE *) dest;
+	volatile CFG_FLASH_WORD_SIZE *data2 = (CFG_FLASH_WORD_SIZE *) & data;
+	ulong start;
+	int i, flag;
+
+	/* Check if Flash is (sufficiently) erased */
+	if ((*((vu_long *)dest) & data) != data)
+		return (2);
+
+	for (i = 0; i < 4 / sizeof(CFG_FLASH_WORD_SIZE); i++) {
+		/* Disable interrupts which might cause a timeout here */
+		flag = disable_interrupts();
+
+		addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+		addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+		addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00A000A0;
+
+		dest2[i] = data2[i];
+
+		/* re-enable interrupts if necessary */
+		if (flag)
+			enable_interrupts();
+
+		/* data polling for D7 */
+		start = get_timer(0);
+		while ((dest2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080) !=
+				(data2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080)) {
+
+			if (get_timer(start) > CFG_FLASH_WRITE_TOUT)
+				return (1);
+		}
+	}
+
+	return (0);
+}
+
+#ifdef CFG_FLASH_2ND_16BIT_DEV
+
+#undef  CFG_FLASH_WORD_SIZE
+#define CFG_FLASH_WORD_SIZE unsigned short
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+static ulong flash_get_size_2(vu_long * addr, flash_info_t * info)
+{
+	short i;
+	int n;
+	CFG_FLASH_WORD_SIZE value;
+	ulong base = (ulong) addr;
+	volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) addr;
+
+	DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr);
+
+	/* issue bank reset to return to read mode */
+	addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0;
+	/* Write auto select command: read Manufacturer ID */
+	addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+	addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+	addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00900090;
+	udelay(1000);
+
+	value = addr2[0];
+	DEBUGF("FLASH MANUFACT: %x\n", value);
+
+	switch (value) {
+		case (CFG_FLASH_WORD_SIZE) AMD_MANUFACT:
+			info->flash_id = FLASH_MAN_AMD;
+			break;
+		case (CFG_FLASH_WORD_SIZE) FUJ_MANUFACT:
+			info->flash_id = FLASH_MAN_FUJ;
+			break;
+		case (CFG_FLASH_WORD_SIZE) SST_MANUFACT:
+			info->flash_id = FLASH_MAN_SST;
+			break;
+		case (CFG_FLASH_WORD_SIZE) STM_MANUFACT:
+			info->flash_id = FLASH_MAN_STM;
+			break;
+		case (CFG_FLASH_WORD_SIZE) MX_MANUFACT:
+			info->flash_id = FLASH_MAN_MX;
+			break;
+		default:
+			info->flash_id = FLASH_UNKNOWN;
+			info->sector_count = 0;
+			info->size = 0;
+			return (0);	/* no or unknown flash  */
+	}
+
+	value = addr2[1];	/* device ID            */
+	DEBUGF("\nFLASH DEVICEID: %x\n", value);
+
+	switch (value) {
+		case (CFG_FLASH_WORD_SIZE)AMD_ID_LV320T:
+			info->flash_id += FLASH_AM320T;
+			info->sector_count = 71;
+			info->size = 0x00400000;
+			break;	/* => 4 MB	*/
+		case (CFG_FLASH_WORD_SIZE)AMD_ID_LV320B:
+			info->flash_id += FLASH_AM320B;
+			info->sector_count = 71;
+			info->size = 0x00400000;
+			break;	/* => 4 MB	*/
+		case (CFG_FLASH_WORD_SIZE)STM_ID_29W320DT:
+			info->flash_id += FLASH_STMW320DT;
+			info->sector_count = 67;
+			info->size = 0x00400000;
+			break;	/* => 4 MB	*/
+		case (CFG_FLASH_WORD_SIZE)MX_ID_LV320T:
+			info->flash_id += FLASH_MXLV320T;
+			info->sector_count = 71;
+			info->size = 0x00400000;
+			break;	/* => 4 MB	*/
+		default:
+			info->flash_id = FLASH_UNKNOWN;
+			return (0);	/* => no or unknown flash */
+	}
+
+	/* set up sector start address table */
+	if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
+			((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) ||
+			((info->flash_id & FLASH_TYPEMASK) == FLASH_AMD016)) {
+		for (i = 0; i < info->sector_count; i++)
+			info->start[i] = base + (i * 0x00010000);
+	} else if ((info->flash_id & FLASH_TYPEMASK) == FLASH_STMW320DT) {
+		/* set sector offsets for top boot block type		*/
+		base += info->size;
+		i = info->sector_count;
+		/*  1 x 16k boot sector */
+		base -= 16 << 10;
+		--i;
+		info->start[i] = base;
+		/*  2 x 8k  boot sectors */
+		for (n = 0; n < 2; ++n) {
+			base -= 8 << 10;
+			--i;
+			info->start[i] = base;
+		}
+		/*  1 x 32k boot sector */
+		base -= 32 << 10;
+		--i;
+		info->start[i] = base;
+
+		while (i > 0) {			/* 64k regular sectors	*/
+			base -= 64 << 10;
+			--i;
+			info->start[i] = base;
+		}
+	} else if ((info->flash_id & FLASH_TYPEMASK) == FLASH_MXLV320T) {
+		i = info->sector_count - 1;
+		info->start[i--] = base + info->size - 0x00002000;
+		info->start[i--] = base + info->size - 0x00004000;
+		info->start[i--] = base + info->size - 0x00006000;
+		info->start[i--] = base + info->size - 0x00008000;
+		info->start[i--] = base + info->size - 0x0000a000;
+		info->start[i--] = base + info->size - 0x0000c000;
+		info->start[i--] = base + info->size - 0x0000e000;
+		info->start[i--] = base + info->size - 0x00010000;
+
+		for (; i >= 0; i--)
+			info->start[i] = base + i * 0x00010000;
+	} else {
+		if (info->flash_id & FLASH_BTYPE) {
+			/* set sector offsets for bottom boot block type        */
+			info->start[0] = base + 0x00000000;
+			info->start[1] = base + 0x00004000;
+			info->start[2] = base + 0x00006000;
+			info->start[3] = base + 0x00008000;
+
+			for (i = 4; i < info->sector_count; i++)
+				info->start[i] = base + (i * 0x00010000) - 0x00030000;
+		} else {
+			/* set sector offsets for top boot block type           */
+			i = info->sector_count - 1;
+			info->start[i--] = base + info->size - 0x00004000;
+			info->start[i--] = base + info->size - 0x00006000;
+			info->start[i--] = base + info->size - 0x00008000;
+
+			for (; i >= 0; i--)
+				info->start[i] = base + i * 0x00010000;
+		}
+	}
+
+	/* check for protected sectors */
+	for (i = 0; i < info->sector_count; i++) {
+		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
+		/* D0 = 1 if protected */
+		addr2 = (volatile CFG_FLASH_WORD_SIZE *)(info->start[i]);
+
+		/* For AMD29033C flash we need to resend the command of *
+		 * reading flash protection for upper 8 Mb of flash     */
+		if (i == 32) {
+			addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA;
+			addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555;
+			addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x90909090;
+		}
+
+		if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
+			info->protect[i] = 0;
+		else
+			info->protect[i] = addr2[2] & 1;
+	}
+
+	/* issue bank reset to return to read mode */
+	addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0;
+
+	return (info->size);
+}
+
+static int wait_for_DQ7_2(flash_info_t * info, int sect)
+{
+	ulong start, now, last;
+	volatile CFG_FLASH_WORD_SIZE *addr =
+		(CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+
+	start = get_timer(0);
+	last = start;
+	while ((addr[0] & (CFG_FLASH_WORD_SIZE) 0x00800080) !=
+			(CFG_FLASH_WORD_SIZE) 0x00800080) {
+		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+			printf("Timeout\n");
+			return -1;
+		}
+		/* show that we're waiting */
+		if ((now - last) > 1000) {	/* every second */
+			putc('.');
+			last = now;
+		}
+	}
+	return 0;
+}
+
+static int flash_erase_2(flash_info_t * info, int s_first, int s_last)
+{
+	volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
+	volatile CFG_FLASH_WORD_SIZE *addr2;
+	int flag, prot, sect, l_sect;
+	int i;
+
+	if ((s_first < 0) || (s_first > s_last)) {
+		if (info->flash_id == FLASH_UNKNOWN)
+			printf("- missing\n");
+		else
+			printf("- no sectors to erase\n");
+		return 1;
+	}
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		printf("Can't erase unknown flash type - aborted\n");
+		return 1;
+	}
+
+	prot = 0;
+	for (sect = s_first; sect <= s_last; ++sect) {
+		if (info->protect[sect])
+			prot++;
+	}
+
+	if (prot)
+		printf("- Warning: %d protected sectors will not be erased!",	prot);
+
+	printf("\n");
+
+	l_sect = -1;
+
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts();
+
+	/* Start erase on unprotected sectors */
+	for (sect = s_first; sect <= s_last; sect++) {
+		if (info->protect[sect] == 0) {	/* not protected */
+			addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
+
+			if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
+				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+				addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080;
+				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+				addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+				addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00500050;	/* block erase */
+				for (i = 0; i < 50; i++)
+					udelay(1000);	/* wait 1 ms */
+			} else {
+				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+				addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080;
+				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+				addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+				addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00300030;	/* sector erase */
+			}
+			l_sect = sect;
+			/*
+			 * Wait for each sector to complete, it's more
+			 * reliable.  According to AMD Spec, you must
+			 * issue all erase commands within a specified
+			 * timeout.  This has been seen to fail, especially
+			 * if printf()s are included (for debug)!!
+			 */
+			wait_for_DQ7_2(info, sect);
+		}
+	}
+
+	/* re-enable interrupts if necessary */
+	if (flag)
+		enable_interrupts();
+
+	/* wait at least 80us - let's wait 1 ms */
+	udelay(1000);
+
+	/* reset to read mode */
+	addr = (CFG_FLASH_WORD_SIZE *) info->start[0];
+	addr[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0;	/* reset bank */
+
+	printf(" done\n");
+	return 0;
+}
+
+static int write_word_2(flash_info_t * info, ulong dest, ulong data)
+{
+	volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
+	volatile CFG_FLASH_WORD_SIZE *dest2 = (CFG_FLASH_WORD_SIZE *) dest;
+	volatile CFG_FLASH_WORD_SIZE *data2 = (CFG_FLASH_WORD_SIZE *) & data;
+	ulong start;
+	int i;
+
+	/* Check if Flash is (sufficiently) erased */
+	if ((*((vu_long *)dest) & data) != data)
+		return (2);
+
+	for (i = 0; i < 4 / sizeof(CFG_FLASH_WORD_SIZE); i++) {
+		int flag;
+
+		/* Disable interrupts which might cause a timeout here */
+		flag = disable_interrupts();
+
+		addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+		addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+		addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00A000A0;
+
+		dest2[i] = data2[i];
+
+		/* re-enable interrupts if necessary */
+		if (flag)
+			enable_interrupts();
+
+		/* data polling for D7 */
+		start = get_timer(0);
+		while ((dest2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080) !=
+				(data2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080)) {
+
+			if (get_timer(start) > CFG_FLASH_WRITE_TOUT)
+				return (1);
+		}
+	}
+
+	return (0);
+}
+#endif /* CFG_FLASH_2ND_16BIT_DEV */
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size(vu_long * addr, flash_info_t * info);
+static int write_word(flash_info_t * info, ulong dest, ulong data);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init(void)
+{
+	unsigned long total_b = 0;
+	unsigned long size_b[CFG_MAX_FLASH_BANKS];
+	unsigned short index = 0;
+	int i;
+	unsigned long val;
+	unsigned long ebc_boot_size;
+	unsigned long boot_selection;
+
+	mfsdr(sdr_pstrp0, val);
+	index = (val & SDR0_PSTRP0_BOOTSTRAP_MASK) >> 28;
+
+	if ((index == 0xc) || (index == 8)) {
+		/*
+		 * Boot Settings in IIC EEprom address 0xA8 or 0xA0
+		 * Read Serial Device Strap Register1 in PPC440SPe
+		 */
+		mfsdr(sdr_sdstp1, val);
+		boot_selection  = val & SDR0_SDSTP1_BOOT_SEL_MASK;
+		ebc_boot_size   = val & SDR0_SDSTP1_EBC_ROM_BS_MASK;
+
+		switch(boot_selection) {
+			case SDR0_SDSTP1_BOOT_SEL_EBC:
+				switch(ebc_boot_size) {
+					case SDR0_SDSTP1_EBC_ROM_BS_16BIT:
+						index = 3;
+						break;
+					case SDR0_SDSTP1_EBC_ROM_BS_8BIT:
+						index = 0;
+						break;
+				}
+				break;
+
+			case SDR0_SDSTP1_BOOT_SEL_PCI:
+				index = 1;
+				break;
+
+		}
+	} /*else if (index == 0) {*/
+/*		if (in8(FPGA_SETTING_REG) & FPGA_SET_REG_OP_CODE_FLASH_ABOVE)*/
+/*			index = 8;*/ /* sram below op code flash -> new index 8*/
+/*	}*/
+
+	DEBUGF("\n");
+	DEBUGF("FLASH: Index: %d\n", index);
+
+	/* Init: no FLASHes known */
+	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+		flash_info[i].flash_id = FLASH_UNKNOWN;
+		flash_info[i].sector_count = -1;
+		flash_info[i].size = 0;
+
+		/* check whether the address is 0 */
+		if (flash_addr_table[index][i] == 0)
+			continue;
+
+		/* call flash_get_size() to initialize sector address */
+		size_b[i] = flash_get_size((vu_long *) flash_addr_table[index][i],
+				&flash_info[i]);
+
+		flash_info[i].size = size_b[i];
+
+		if (flash_info[i].flash_id == FLASH_UNKNOWN) {
+			printf("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",
+					i, size_b[i], size_b[i] << 20);
+			flash_info[i].sector_count = -1;
+			flash_info[i].size = 0;
+		}
+
+		/* Monitor protection ON by default */
+		(void)flash_protect(FLAG_PROTECT_SET, CFG_MONITOR_BASE,
+				    CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+				    &flash_info[i]);
+#if defined(CFG_ENV_IS_IN_FLASH)
+		(void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR,
+				    CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
+				    &flash_info[i]);
+#if defined(CFG_ENV_ADDR_REDUND)
+		(void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR_REDUND,
+				    CFG_ENV_ADDR_REDUND + CFG_ENV_SECT_SIZE - 1,
+				    &flash_info[i]);
+#endif
+#endif
+		total_b += flash_info[i].size;
+	}
+
+	return total_b;
+}
diff --git a/board/amcc/yucca/init.S b/board/amcc/yucca/init.S
new file mode 100644
index 0000000000..cb28936681
--- /dev/null
+++ b/board/amcc/yucca/init.S
@@ -0,0 +1,104 @@
+/*
+ *  Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+/* port to AMCC 440SPE evaluatioon board - SG April 12,2005  */
+
+#include <ppc_asm.tmpl>
+#include <config.h>
+
+/* General */
+#define TLB_VALID   0x00000200
+
+/* Supported page sizes */
+
+#define SZ_1K	0x00000000
+#define SZ_4K	0x00000010
+#define SZ_16K	0x00000020
+#define SZ_64K	0x00000030
+#define SZ_256K	0x00000040
+#define SZ_1M	0x00000050
+#define SZ_16M	0x00000070
+#define SZ_256M	0x00000090
+
+/* Storage attributes */
+#define SA_W	0x00000800	/* Write-through */
+#define SA_I	0x00000400	/* Caching inhibited */
+#define SA_M	0x00000200	/* Memory coherence */
+#define SA_G	0x00000100	/* Guarded */
+#define SA_E	0x00000080	/* Endian */
+
+/* Access control */
+#define AC_X	0x00000024	/* Execute */
+#define AC_W	0x00000012	/* Write */
+#define AC_R	0x00000009	/* Read */
+
+/* Some handy macros */
+
+#define EPN(e)		((e) & 0xfffffc00)
+#define TLB0(epn,sz)	((EPN((epn)) | (sz) | TLB_VALID ))
+#define TLB1(rpn,erpn)	(((rpn) & 0xfffffc00) | (erpn))
+#define TLB2(a)		((a) & 0x00000fbf)
+
+#define tlbtab_start\
+	mflr	r1	;\
+	bl	0f	;
+
+#define tlbtab_end\
+	.long 0, 0, 0	;\
+0:	mflr	r0	;\
+	mtlr	r1	;\
+	blr		;
+
+#define tlbentry(epn,sz,rpn,erpn,attr)\
+	.long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)
+
+/**************************************************************************
+ * TLB TABLE
+ *
+ * This table is used by the cpu boot code to setup the initial tlb
+ * entries. Rather than make broad assumptions in the cpu source tree,
+ * this table lets each board set things up however they like.
+ *
+ *  Pointer to the table is returned in r1
+ *
+ *************************************************************************/
+
+	.section .bootpg,"ax"
+	.globl tlbtab
+
+tlbtab:
+	tlbtab_start
+	tlbentry(0xfff00000, SZ_16M, 0xfff00000, 4, AC_R|AC_W|AC_X|SA_G)
+
+	tlbentry(CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
+	tlbentry(CFG_SDRAM_BASE + 0x10000000, SZ_256M, 0x10000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
+	tlbentry(CFG_SDRAM_BASE + 0x20000000, SZ_256M, 0x20000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
+	tlbentry(CFG_SDRAM_BASE + 0x30000000, SZ_256M, 0x30000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I)
+
+	tlbentry(CFG_ISRAM_BASE, SZ_256K, 0x00000000, 4, AC_R|AC_W|AC_X|SA_I)
+	tlbentry(CFG_FPGA_BASE,SZ_1K, 0xE2000000, 4,AC_R|AC_W|SA_I)
+
+	tlbentry(CFG_OPER_FLASH,SZ_16M,0xE7000000, 4,AC_R|AC_W|AC_X|SA_G|SA_I)
+	tlbentry(CFG_PERIPHERAL_BASE, SZ_4K, 0xF0000000, 4, AC_R|AC_W|SA_G|SA_I)
+
+	tlbentry(CFG_PCI_BASE, SZ_256M, 0x00000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+	tlbentry(CFG_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC, AC_R|AC_W|SA_G|SA_I)
+	tlbtab_end
diff --git a/board/amcc/yucca/u-boot.lds b/board/amcc/yucca/u-boot.lds
new file mode 100644
index 0000000000..9df4f925c2
--- /dev/null
+++ b/board/amcc/yucca/u-boot.lds
@@ -0,0 +1,157 @@
+/*
+ * (C) Copyright 2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  .resetvec 0xFFFFFFFC :
+  {
+    *(.resetvec)
+  } = 0xffff
+
+  .bootpg 0xFFFFF000 :
+  {
+    cpu/ppc4xx/start.o	(.bootpg)
+  } = 0xffff
+
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)	}
+  .rela.text     : { *(.rela.text)	}
+  .rel.data      : { *(.rel.data)	}
+  .rela.data     : { *(.rela.data)	}
+  .rel.rodata    : { *(.rel.rodata)	}
+  .rela.rodata   : { *(.rela.rodata)	}
+  .rel.got       : { *(.rel.got)	}
+  .rela.got      : { *(.rela.got)	}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)	}
+  .rela.bss      : { *(.rela.bss)	}
+  .rel.plt       : { *(.rel.plt)	}
+  .rela.plt      : { *(.rela.plt)	}
+  .init          : { *(.init)		}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/ppc4xx/start.o		(.text)
+    board/amcc/yucca/init.o	(.text)
+    cpu/ppc4xx/kgdb.o		(.text)
+    cpu/ppc4xx/traps.o		(.text)
+    cpu/ppc4xx/interrupts.o	(.text)
+    cpu/ppc4xx/serial.o		(.text)
+    cpu/ppc4xx/cpu_init.o	(.text)
+    cpu/ppc4xx/speed.o		(.text)
+    common/dlmalloc.o		(.text)
+    lib_generic/crc32.o		(.text)
+    lib_ppc/extable.o		(.text)
+    lib_generic/zlib.o		(.text)
+
+/*    . = env_offset;*/
+/*    common/environment.o(.text)*/
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+    *(.eh_frame)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = .;
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  . = .;
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
diff --git a/board/amcc/yucca/u-boot.lds.debug b/board/amcc/yucca/u-boot.lds.debug
new file mode 100644
index 0000000000..474f922161
--- /dev/null
+++ b/board/amcc/yucca/u-boot.lds.debug
@@ -0,0 +1,146 @@
+/*
+ * (C) Copyright 2002-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)	}
+  .rela.text     : { *(.rela.text)	}
+  .rel.data      : { *(.rel.data)	}
+  .rela.data     : { *(.rela.data)	}
+  .rel.rodata    : { *(.rel.rodata)	}
+  .rela.rodata   : { *(.rela.rodata)	}
+  .rel.got       : { *(.rel.got)	}
+  .rela.got      : { *(.rela.got)	}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)	}
+  .rela.bss      : { *(.rela.bss)	}
+  .rel.plt       : { *(.rel.plt)	}
+  .rela.plt      : { *(.rela.plt)	}
+  .init          : { *(.init)		}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/ppc4xx/start.o		(.text)
+    board/amcc/yucca/init.o	(.text)
+    cpu/ppc4xx/kgdb.o		(.text)
+    cpu/ppc4xx/traps.o		(.text)
+    cpu/ppc4xx/interrupts.o	(.text)
+    cpu/ppc4xx/serial.o		(.text)
+    cpu/ppc4xx/cpu_init.o	(.text)
+    cpu/ppc4xx/speed.o		(.text)
+    common/dlmalloc.o		(.text)
+    lib_generic/crc32.o		(.text)
+    lib_ppc/extable.o		(.text)
+    lib_generic/zlib.o		(.text)
+
+/*    common/environment.o(.text) */
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+    *(.eh_frame)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x0FFF) & 0xFFFFF000;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = .;
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  . = .;
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
diff --git a/board/amcc/yucca/yucca.c b/board/amcc/yucca/yucca.c
new file mode 100644
index 0000000000..ce1312cf7d
--- /dev/null
+++ b/board/amcc/yucca/yucca.c
@@ -0,0 +1,1096 @@
+/*
+ * (C) Copyright 2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * Port to AMCC-440SPE Evaluation Board SOP - April 2005
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+#include <i2c.h>
+#include "yucca.h"
+
+void fpga_init (void);
+
+void get_sys_info(PPC440_SYS_INFO *board_cfg );
+int compare_to_true(char *str );
+char *remove_l_w_space(char *in_str );
+char *remove_t_w_space(char *in_str );
+int get_console_port(void);
+unsigned long ppcMfcpr(unsigned long cpr_reg);
+unsigned long ppcMfsdr(unsigned long sdr_reg);
+
+#define DEBUG_ENV
+#ifdef DEBUG_ENV
+#define DEBUGF(fmt,args...) printf(fmt ,##args)
+#else
+#define DEBUGF(fmt,args...)
+#endif
+
+#define FALSE	0
+#define TRUE	1
+
+int board_early_init_f (void)
+{
+/*----------------------------------------------------------------------------+
+| Define Boot devices
++----------------------------------------------------------------------------*/
+#define BOOT_FROM_SMALL_FLASH		0x00
+#define BOOT_FROM_LARGE_FLASH_OR_SRAM	0x01
+#define BOOT_FROM_PCI			0x02
+#define BOOT_DEVICE_UNKNOWN		0x03
+
+/*----------------------------------------------------------------------------+
+| EBC Devices Characteristics
+|   Peripheral Bank Access Parameters       -   EBC_BxAP
+|   Peripheral Bank Configuration Register  -   EBC_BxCR
++----------------------------------------------------------------------------*/
+
+/*
+ * Small Flash and FRAM
+ * BU Value
+ * BxAP : 0x03800000  - 0 00000111 0 00 00 00 00 00 000 0 0 0 0 00000
+ * B0CR : 0xff098000  - BAS = ff0 - 100 11 00 0000000000000
+ * B2CR : 0xe7098000  - BAS = e70 - 100 11 00 0000000000000
+ */
+#define EBC_BXAP_SMALL_FLASH		EBC_BXAP_BME_DISABLED	| \
+					EBC_BXAP_TWT_ENCODE(7)	| \
+					EBC_BXAP_BCE_DISABLE	| \
+					EBC_BXAP_BCT_2TRANS	| \
+					EBC_BXAP_CSN_ENCODE(0)	| \
+					EBC_BXAP_OEN_ENCODE(0)	| \
+					EBC_BXAP_WBN_ENCODE(0)	| \
+					EBC_BXAP_WBF_ENCODE(0)	| \
+					EBC_BXAP_TH_ENCODE(0)	| \
+					EBC_BXAP_RE_DISABLED	| \
+					EBC_BXAP_SOR_DELAYED	| \
+					EBC_BXAP_BEM_WRITEONLY	| \
+					EBC_BXAP_PEN_DISABLED
+
+#define EBC_BXCR_SMALL_FLASH_CS0	EBC_BXCR_BAS_ENCODE(0xFF000000)	| \
+					EBC_BXCR_BS_16MB		| \
+					EBC_BXCR_BU_RW			| \
+					EBC_BXCR_BW_8BIT
+
+#define EBC_BXCR_SMALL_FLASH_CS2	EBC_BXCR_BAS_ENCODE(0xe7000000)	| \
+					EBC_BXCR_BS_16MB		| \
+					EBC_BXCR_BU_RW			| \
+					EBC_BXCR_BW_8BIT
+
+/*
+ * Large Flash and SRAM
+ * BU Value
+ * BxAP : 0x048ff240  - 0 00000111 0 00 00 00 00 00 000 0 0 0 0 00000
+ * B0CR : 0xff09a000  - BAS = ff0 - 100 11 01 0000000000000
+ * B2CR : 0xe709a000  - BAS = e70 - 100 11 01 0000000000000
+*/
+#define EBC_BXAP_LARGE_FLASH		EBC_BXAP_BME_DISABLED	| \
+					EBC_BXAP_TWT_ENCODE(7)	| \
+					EBC_BXAP_BCE_DISABLE	| \
+					EBC_BXAP_BCT_2TRANS	| \
+					EBC_BXAP_CSN_ENCODE(0)	| \
+					EBC_BXAP_OEN_ENCODE(0)	| \
+					EBC_BXAP_WBN_ENCODE(0)	| \
+					EBC_BXAP_WBF_ENCODE(0)	| \
+					EBC_BXAP_TH_ENCODE(0)	| \
+					EBC_BXAP_RE_DISABLED	| \
+					EBC_BXAP_SOR_DELAYED	| \
+					EBC_BXAP_BEM_WRITEONLY	| \
+					EBC_BXAP_PEN_DISABLED
+
+#define EBC_BXCR_LARGE_FLASH_CS0	EBC_BXCR_BAS_ENCODE(0xFF000000)	| \
+					EBC_BXCR_BS_16MB		| \
+					EBC_BXCR_BU_RW			| \
+					EBC_BXCR_BW_16BIT
+
+#define EBC_BXCR_LARGE_FLASH_CS2	EBC_BXCR_BAS_ENCODE(0xE7000000)	| \
+					EBC_BXCR_BS_16MB		| \
+					EBC_BXCR_BU_RW			| \
+					EBC_BXCR_BW_16BIT
+
+/*
+ * FPGA
+ * BU value :
+ * B1AP = 0x05895240  - 0 00001011 0 00 10 01 01 01 001 0 0 1 0 00000
+ * B1CR = 0xe201a000  - BAS = e20 - 000 11 01 00000000000000
+ */
+#define EBC_BXAP_FPGA			EBC_BXAP_BME_DISABLED	| \
+					EBC_BXAP_TWT_ENCODE(11)	| \
+					EBC_BXAP_BCE_DISABLE	| \
+					EBC_BXAP_BCT_2TRANS	| \
+					EBC_BXAP_CSN_ENCODE(10)	| \
+					EBC_BXAP_OEN_ENCODE(1)	| \
+					EBC_BXAP_WBN_ENCODE(1)	| \
+					EBC_BXAP_WBF_ENCODE(1)	| \
+					EBC_BXAP_TH_ENCODE(1)	| \
+					EBC_BXAP_RE_DISABLED	| \
+					EBC_BXAP_SOR_DELAYED	| \
+					EBC_BXAP_BEM_RW		| \
+					EBC_BXAP_PEN_DISABLED
+
+#define EBC_BXCR_FPGA_CS1		EBC_BXCR_BAS_ENCODE(0xe2000000)	| \
+					EBC_BXCR_BS_1MB			| \
+					EBC_BXCR_BU_RW			| \
+					EBC_BXCR_BW_16BIT
+
+	 unsigned long mfr;
+	/*
+	 * Define Variables for EBC initialization depending on BOOTSTRAP option
+	 */
+	unsigned long sdr0_pinstp, sdr0_sdstp1 ;
+	unsigned long bootstrap_settings, ebc_data_width, boot_selection;
+	int computed_boot_device = BOOT_DEVICE_UNKNOWN;
+
+	/*-------------------------------------------------------------------+
+	 | Initialize EBC CONFIG -
+	 | Keep the Default value, but the bit PDT which has to be set to 1 ?TBC
+	 | default value :
+	 |	0x07C00000 - 0 0 000 1 1 1 1 1 0000 0 00000 000000000000
+	 |
+	 +-------------------------------------------------------------------*/
+	mtebc(xbcfg, EBC_CFG_LE_UNLOCK |
+			EBC_CFG_PTD_ENABLE |
+			EBC_CFG_RTC_16PERCLK |
+			EBC_CFG_ATC_PREVIOUS |
+			EBC_CFG_DTC_PREVIOUS |
+			EBC_CFG_CTC_PREVIOUS |
+			EBC_CFG_OEO_PREVIOUS |
+			EBC_CFG_EMC_DEFAULT |
+			EBC_CFG_PME_DISABLE |
+			EBC_CFG_PR_16);
+
+	/*-------------------------------------------------------------------+
+	 |
+	 |  PART 1 : Initialize EBC Bank 1
+	 |  ==============================
+	 | Bank1 is always associated to the EPLD.
+	 | It has to be initialized prior to other banks settings computation
+	 | since some board registers values may be needed to determine the
+	 | boot type
+	 |
+	 +-------------------------------------------------------------------*/
+	mtebc(pb1ap, EBC_BXAP_FPGA);
+	mtebc(pb1cr, EBC_BXCR_FPGA_CS1);
+
+	/*-------------------------------------------------------------------+
+	 |
+	 |  PART 2 : Determine which boot device was selected
+	 |  =================================================
+	 |
+	 |  Read Pin Strap Register in PPC440SPe
+	 |  Result can either be :
+	 |   - Boot strap = boot from EBC 8bits     => Small Flash
+	 |   - Boot strap = boot from PCI
+	 |   - Boot strap = IIC
+	 |  In case of boot from IIC, read Serial Device Strap Register1
+	 |
+	 |  Result can either be :
+	 |   - Boot from EBC  - EBC Bus Width = 8bits    => Small Flash
+	 |   - Boot from EBC  - EBC Bus Width = 16bits   => Large Flash or SRAM
+	 |   - Boot from PCI
+	 |
+	 +-------------------------------------------------------------------*/
+	/* Read Pin Strap Register in PPC440SP */
+	sdr0_pinstp = ppcMfsdr(SDR0_PINSTP);
+	bootstrap_settings = sdr0_pinstp & SDR0_PINSTP_BOOTSTRAP_MASK;
+
+	switch (bootstrap_settings) {
+		case SDR0_PINSTP_BOOTSTRAP_SETTINGS0:
+			/*
+			 * Strapping Option A
+			 * Boot from EBC - 8 bits , Small Flash
+			 */
+			computed_boot_device = BOOT_FROM_SMALL_FLASH;
+			break;
+		case SDR0_PINSTP_BOOTSTRAP_SETTINGS1:
+			/*
+			 * Strappping Option B
+			 * Boot from PCI
+			 */
+			computed_boot_device = BOOT_FROM_PCI;
+			break;
+		case SDR0_PINSTP_BOOTSTRAP_IIC_50_EN:
+		case SDR0_PINSTP_BOOTSTRAP_IIC_54_EN:
+			/*
+			 * Strapping Option C or D
+			 * Boot Settings in IIC EEprom address 0x50 or 0x54
+			 * Read Serial Device Strap Register1 in PPC440SPe
+			 */
+			sdr0_sdstp1 = ppcMfsdr(SDR0_SDSTP1);
+			boot_selection = sdr0_sdstp1 & SDR0_SDSTP1_ERPN_MASK;
+			ebc_data_width = sdr0_sdstp1 & SDR0_SDSTP1_EBCW_MASK;
+
+			switch (boot_selection) {
+				case SDR0_SDSTP1_ERPN_EBC:
+					switch (ebc_data_width) {
+						case SDR0_SDSTP1_EBCW_16_BITS:
+							computed_boot_device =
+								BOOT_FROM_LARGE_FLASH_OR_SRAM;
+							break;
+						case SDR0_SDSTP1_EBCW_8_BITS :
+							computed_boot_device = BOOT_FROM_SMALL_FLASH;
+							break;
+					}
+					break;
+
+				case SDR0_SDSTP1_ERPN_PCI:
+					computed_boot_device = BOOT_FROM_PCI;
+					break;
+				default:
+					/* should not occure */
+					computed_boot_device = BOOT_DEVICE_UNKNOWN;
+			}
+			break;
+		default:
+			/* should not be */
+			computed_boot_device = BOOT_DEVICE_UNKNOWN;
+			break;
+	}
+
+	/*-------------------------------------------------------------------+
+	 |
+	 |  PART 3 : Compute EBC settings depending on selected boot device
+	 |  ======   ======================================================
+	 |
+	 | Resulting EBC init will be among following configurations :
+	 |
+	 |  - Boot from EBC 8bits => boot from Small Flash selected
+	 |            EBC-CS0     = Small Flash
+	 |            EBC-CS2     = Large Flash and SRAM
+	 |
+	 |  - Boot from EBC 16bits => boot from Large Flash or SRAM
+	 |            EBC-CS0     = Large Flash or SRAM
+	 |            EBC-CS2     = Small Flash
+	 |
+	 |  - Boot from PCI
+	 |            EBC-CS0     = not initialized to avoid address contention
+	 |            EBC-CS2     = same as boot from Small Flash selected
+	 |
+	 +-------------------------------------------------------------------*/
+	unsigned long ebc0_cs0_bxap_value = 0, ebc0_cs0_bxcr_value = 0;
+	unsigned long ebc0_cs2_bxap_value = 0, ebc0_cs2_bxcr_value = 0;
+
+	switch (computed_boot_device) {
+		/*-------------------------------------------------------------------*/
+		case BOOT_FROM_PCI:
+		/*-------------------------------------------------------------------*/
+			/*
+			 * By Default CS2 is affected to LARGE Flash
+			 * do not initialize SMALL FLASH to avoid address contention
+			 * Large Flash
+			 */
+			ebc0_cs2_bxap_value = EBC_BXAP_LARGE_FLASH;
+			ebc0_cs2_bxcr_value = EBC_BXCR_LARGE_FLASH_CS2;
+			break;
+
+		/*-------------------------------------------------------------------*/
+		case BOOT_FROM_SMALL_FLASH:
+		/*-------------------------------------------------------------------*/
+			ebc0_cs0_bxap_value = EBC_BXAP_SMALL_FLASH;
+			ebc0_cs0_bxcr_value = EBC_BXCR_SMALL_FLASH_CS0;
+
+			/*
+			 * Large Flash or SRAM
+			 */
+			/* ebc0_cs2_bxap_value = EBC_BXAP_LARGE_FLASH; */
+			ebc0_cs2_bxap_value = 0x048ff240;
+			ebc0_cs2_bxcr_value = EBC_BXCR_LARGE_FLASH_CS2;
+			break;
+
+		/*-------------------------------------------------------------------*/
+		case BOOT_FROM_LARGE_FLASH_OR_SRAM:
+		/*-------------------------------------------------------------------*/
+			ebc0_cs0_bxap_value = EBC_BXAP_LARGE_FLASH;
+			ebc0_cs0_bxcr_value = EBC_BXCR_LARGE_FLASH_CS0;
+
+			/* Small flash */
+			ebc0_cs2_bxap_value = EBC_BXAP_SMALL_FLASH;
+			ebc0_cs2_bxcr_value = EBC_BXCR_SMALL_FLASH_CS2;
+			break;
+
+		/*-------------------------------------------------------------------*/
+		default:
+		/*-------------------------------------------------------------------*/
+			/* BOOT_DEVICE_UNKNOWN */
+			break;
+	}
+
+	mtebc(pb0ap, ebc0_cs0_bxap_value);
+	mtebc(pb0cr, ebc0_cs0_bxcr_value);
+	mtebc(pb2ap, ebc0_cs2_bxap_value);
+	mtebc(pb2cr, ebc0_cs2_bxcr_value);
+
+	/*--------------------------------------------------------------------+
+	 | Interrupt controller setup for the AMCC 440SPe Evaluation board.
+	 +--------------------------------------------------------------------+
+	+---------------------------------------------------------------------+
+	|Interrupt| Source                            | Pol.  | Sensi.| Crit. |
+	+---------+-----------------------------------+-------+-------+-------+
+	| IRQ 00  | UART0                             | High  | Level | Non   |
+	| IRQ 01  | UART1                             | High  | Level | Non   |
+	| IRQ 02  | IIC0                              | High  | Level | Non   |
+	| IRQ 03  | IIC1                              | High  | Level | Non   |
+	| IRQ 04  | PCI0X0 MSG IN                     | High  | Level | Non   |
+	| IRQ 05  | PCI0X0 CMD Write                  | High  | Level | Non   |
+	| IRQ 06  | PCI0X0 Power Mgt                  | High  | Level | Non   |
+	| IRQ 07  | PCI0X0 VPD Access                 | Rising| Edge  | Non   |
+	| IRQ 08  | PCI0X0 MSI level 0                | High  | Lvl/ed| Non   |
+	| IRQ 09  | External IRQ 15 - (PCI-Express)   | pgm H | Pgm   | Non   |
+	| IRQ 10  | UIC2 Non-critical Int.            | NA    | NA    | Non   |
+	| IRQ 11  | UIC2 Critical Interrupt           | NA    | NA    | Crit  |
+	| IRQ 12  | PCI Express MSI Level 0           | Rising| Edge  | Non   |
+	| IRQ 13  | PCI Express MSI Level 1           | Rising| Edge  | Non   |
+	| IRQ 14  | PCI Express MSI Level 2           | Rising| Edge  | Non   |
+	| IRQ 15  | PCI Express MSI Level 3           | Rising| Edge  | Non   |
+	| IRQ 16  | UIC3 Non-critical Int.            | NA    | NA    | Non   |
+	| IRQ 17  | UIC3 Critical Interrupt           | NA    | NA    | Crit  |
+	| IRQ 18  | External IRQ 14 - (PCI-Express)   | Pgm   | Pgm   | Non   |
+	| IRQ 19  | DMA Channel 0 FIFO Full           | High  | Level | Non   |
+	| IRQ 20  | DMA Channel 0 Stat FIFO           | High  | Level | Non   |
+	| IRQ 21  | DMA Channel 1 FIFO Full           | High  | Level | Non   |
+	| IRQ 22  | DMA Channel 1 Stat FIFO           | High  | Level | Non   |
+	| IRQ 23  | I2O Inbound Doorbell              | High  | Level | Non   |
+	| IRQ 24  | Inbound Post List FIFO Not Empt   | High  | Level | Non   |
+	| IRQ 25  | I2O Region 0 LL PLB Write         | High  | Level | Non   |
+	| IRQ 26  | I2O Region 1 LL PLB Write         | High  | Level | Non   |
+	| IRQ 27  | I2O Region 0 HB PLB Write         | High  | Level | Non   |
+	| IRQ 28  | I2O Region 1 HB PLB Write         | High  | Level | Non   |
+	| IRQ 29  | GPT Down Count Timer              | Rising| Edge  | Non   |
+	| IRQ 30  | UIC1 Non-critical Int.            | NA    | NA    | Non   |
+	| IRQ 31  | UIC1 Critical Interrupt           | NA    | NA    | Crit. |
+	|----------------------------------------------------------------------
+	| IRQ 32  | Ext. IRQ 13 - (PCI-Express)       |pgm (H)|pgm/Lvl| Non   |
+	| IRQ 33  | MAL Serr                          | High  | Level | Non   |
+	| IRQ 34  | MAL Txde                          | High  | Level | Non   |
+	| IRQ 35  | MAL Rxde                          | High  | Level | Non   |
+	| IRQ 36  | DMC CE or DMC UE                  | High  | Level | Non   |
+	| IRQ 37  | EBC or UART2                      | High  |Lvl Edg| Non   |
+	| IRQ 38  | MAL TX EOB                        | High  | Level | Non   |
+	| IRQ 39  | MAL RX EOB                        | High  | Level | Non   |
+	| IRQ 40  | PCIX0 MSI Level 1                 | High  |Lvl Edg| Non   |
+	| IRQ 41  | PCIX0 MSI level 2                 | High  |Lvl Edg| Non   |
+	| IRQ 42  | PCIX0 MSI level 3                 | High  |Lvl Edg| Non   |
+	| IRQ 43  | L2 Cache                          | Risin | Edge  | Non   |
+	| IRQ 44  | GPT Compare Timer 0               | Risin | Edge  | Non   |
+	| IRQ 45  | GPT Compare Timer 1               | Risin | Edge  | Non   |
+	| IRQ 46  | GPT Compare Timer 2               | Risin | Edge  | Non   |
+	| IRQ 47  | GPT Compare Timer 3               | Risin | Edge  | Non   |
+	| IRQ 48  | GPT Compare Timer 4               | Risin | Edge  | Non   |
+	| IRQ 49  | Ext. IRQ 12 - PCI-X               |pgm/Fal|pgm/Lvl| Non   |
+	| IRQ 50  | Ext. IRQ 11 -                     |pgm (H)|pgm/Lvl| Non   |
+	| IRQ 51  | Ext. IRQ 10 -                     |pgm (H)|pgm/Lvl| Non   |
+	| IRQ 52  | Ext. IRQ 9                        |pgm (H)|pgm/Lvl| Non   |
+	| IRQ 53  | Ext. IRQ 8                        |pgm (H)|pgm/Lvl| Non   |
+	| IRQ 54  | DMA Error                         | High  | Level | Non   |
+	| IRQ 55  | DMA I2O Error                     | High  | Level | Non   |
+	| IRQ 56  | Serial ROM                        | High  | Level | Non   |
+	| IRQ 57  | PCIX0 Error                       | High  | Edge  | Non   |
+	| IRQ 58  | Ext. IRQ 7-                       |pgm (H)|pgm/Lvl| Non   |
+	| IRQ 59  | Ext. IRQ 6-                       |pgm (H)|pgm/Lvl| Non   |
+	| IRQ 60  | EMAC0 Interrupt                   | High  | Level | Non   |
+	| IRQ 61  | EMAC0 Wake-up                     | High  | Level | Non   |
+	| IRQ 62  | Reserved                          | High  | Level | Non   |
+	| IRQ 63  | XOR                               | High  | Level | Non   |
+	|----------------------------------------------------------------------
+	| IRQ 64  | PE0 AL                            | High  | Level | Non   |
+	| IRQ 65  | PE0 VPD Access                    | Risin | Edge  | Non   |
+	| IRQ 66  | PE0 Hot Reset Request             | Risin | Edge  | Non   |
+	| IRQ 67  | PE0 Hot Reset Request             | Falli | Edge  | Non   |
+	| IRQ 68  | PE0 TCR                           | High  | Level | Non   |
+	| IRQ 69  | PE0 BusMaster VCO                 | Falli | Edge  | Non   |
+	| IRQ 70  | PE0 DCR Error                     | High  | Level | Non   |
+	| IRQ 71  | Reserved                          | N/A   | N/A   | Non   |
+	| IRQ 72  | PE1 AL                            | High  | Level | Non   |
+	| IRQ 73  | PE1 VPD Access                    | Risin | Edge  | Non   |
+	| IRQ 74  | PE1 Hot Reset Request             | Risin | Edge  | Non   |
+	| IRQ 75  | PE1 Hot Reset Request             | Falli | Edge  | Non   |
+	| IRQ 76  | PE1 TCR                           | High  | Level | Non   |
+	| IRQ 77  | PE1 BusMaster VCO                 | Falli | Edge  | Non   |
+	| IRQ 78  | PE1 DCR Error                     | High  | Level | Non   |
+	| IRQ 79  | Reserved                          | N/A   | N/A   | Non   |
+	| IRQ 80  | PE2 AL                            | High  | Level | Non   |
+	| IRQ 81  | PE2 VPD Access                    | Risin | Edge  | Non   |
+	| IRQ 82  | PE2 Hot Reset Request             | Risin | Edge  | Non   |
+	| IRQ 83  | PE2 Hot Reset Request             | Falli | Edge  | Non   |
+	| IRQ 84  | PE2 TCR                           | High  | Level | Non   |
+	| IRQ 85  | PE2 BusMaster VCO                 | Falli | Edge  | Non   |
+	| IRQ 86  | PE2 DCR Error                     | High  | Level | Non   |
+	| IRQ 87  | Reserved                          | N/A   | N/A   | Non   |
+	| IRQ 88  | External IRQ(5)                   | Progr | Progr | Non   |
+	| IRQ 89  | External IRQ 4 - Ethernet         | Progr | Progr | Non   |
+	| IRQ 90  | External IRQ 3 - PCI-X            | Progr | Progr | Non   |
+	| IRQ 91  | External IRQ 2 - PCI-X            | Progr | Progr | Non   |
+	| IRQ 92  | External IRQ 1 - PCI-X            | Progr | Progr | Non   |
+	| IRQ 93  | External IRQ 0 - PCI-X            | Progr | Progr | Non   |
+	| IRQ 94  | Reserved                          | N/A   | N/A   | Non   |
+	| IRQ 95  | Reserved                          | N/A   | N/A   | Non   |
+	|---------------------------------------------------------------------
+	| IRQ 96  | PE0 INTA                          | High  | Level | Non   |
+	| IRQ 97  | PE0 INTB                          | High  | Level | Non   |
+	| IRQ 98  | PE0 INTC                          | High  | Level | Non   |
+	| IRQ 99  | PE0 INTD                          | High  | Level | Non   |
+	| IRQ 100 | PE1 INTA                          | High  | Level | Non   |
+	| IRQ 101 | PE1 INTB                          | High  | Level | Non   |
+	| IRQ 102 | PE1 INTC                          | High  | Level | Non   |
+	| IRQ 103 | PE1 INTD                          | High  | Level | Non   |
+	| IRQ 104 | PE2 INTA                          | High  | Level | Non   |
+	| IRQ 105 | PE2 INTB                          | High  | Level | Non   |
+	| IRQ 106 | PE2 INTC                          | High  | Level | Non   |
+	| IRQ 107 | PE2 INTD                          | Risin | Edge  | Non   |
+	| IRQ 108 | PCI Express MSI Level 4           | Risin | Edge  | Non   |
+	| IRQ 109 | PCI Express MSI Level 5           | Risin | Edge  | Non   |
+	| IRQ 110 | PCI Express MSI Level 6           | Risin | Edge  | Non   |
+	| IRQ 111 | PCI Express MSI Level 7           | Risin | Edge  | Non   |
+	| IRQ 116 | PCI Express MSI Level 12          | Risin | Edge  | Non   |
+	| IRQ 112 | PCI Express MSI Level 8           | Risin | Edge  | Non   |
+	| IRQ 113 | PCI Express MSI Level 9           | Risin | Edge  | Non   |
+	| IRQ 114 | PCI Express MSI Level 10          | Risin | Edge  | Non   |
+	| IRQ 115 | PCI Express MSI Level 11          | Risin | Edge  | Non   |
+	| IRQ 117 | PCI Express MSI Level 13          | Risin | Edge  | Non   |
+	| IRQ 118 | PCI Express MSI Level 14          | Risin | Edge  | Non   |
+	| IRQ 119 | PCI Express MSI Level 15          | Risin | Edge  | Non   |
+	| IRQ 120 | PCI Express MSI Level 16          | Risin | Edge  | Non   |
+	| IRQ 121 | PCI Express MSI Level 17          | Risin | Edge  | Non   |
+	| IRQ 122 | PCI Express MSI Level 18          | Risin | Edge  | Non   |
+	| IRQ 123 | PCI Express MSI Level 19          | Risin | Edge  | Non   |
+	| IRQ 124 | PCI Express MSI Level 20          | Risin | Edge  | Non   |
+	| IRQ 125 | PCI Express MSI Level 21          | Risin | Edge  | Non   |
+	| IRQ 126 | PCI Express MSI Level 22          | Risin | Edge  | Non   |
+	| IRQ 127 | PCI Express MSI Level 23          | Risin | Edge  | Non   |
+	+---------+-----------------------------------+-------+-------+------*/
+	/*--------------------------------------------------------------------+
+	 | Put UICs in PowerPC440SPemode.
+	 | Initialise UIC registers.  Clear all interrupts.  Disable all
+	 | interrupts.
+	 | Set critical interrupt values.  Set interrupt polarities.  Set
+	 | interrupt trigger levels.  Make bit 0 High  priority.  Clear all
+	 | interrupts again.
+	 +-------------------------------------------------------------------*/
+	mtdcr (uic3sr, 0xffffffff);	/* Clear all interrupts */
+	mtdcr (uic3er, 0x00000000);	/* disable all interrupts */
+	mtdcr (uic3cr, 0x00000000);	/* Set Critical / Non Critical
+					 * interrupts */
+	mtdcr (uic3pr, 0xffffffff);	/* Set Interrupt Polarities */
+	mtdcr (uic3tr, 0x001fffff);	/* Set Interrupt Trigger Levels */
+	mtdcr (uic3vr, 0x00000001);	/* Set Vect base=0,INT31 Highest
+					 * priority */
+	mtdcr (uic3sr, 0x00000000);	/* clear all  interrupts */
+	mtdcr (uic3sr, 0xffffffff);	/* clear all  interrupts */
+
+	mtdcr (uic2sr, 0xffffffff);	/* Clear all interrupts */
+	mtdcr (uic2er, 0x00000000);	/* disable all interrupts */
+	mtdcr (uic2cr, 0x00000000);	/* Set Critical / Non Critical
+					 * interrupts */
+	mtdcr (uic2pr, 0xebebebff);	/* Set Interrupt Polarities */
+	mtdcr (uic2tr, 0x74747400);	/* Set Interrupt Trigger Levels */
+	mtdcr (uic2vr, 0x00000001);	/* Set Vect base=0,INT31 Highest
+					 * priority */
+	mtdcr (uic2sr, 0x00000000);	/* clear all interrupts */
+	mtdcr (uic2sr, 0xffffffff);	/* clear all interrupts */
+
+	mtdcr (uic1sr, 0xffffffff);	/* Clear all interrupts */
+	mtdcr (uic1er, 0x00000000);	/* disable all interrupts */
+	mtdcr (uic1cr, 0x00000000);	/* Set Critical / Non Critical
+					 * interrupts */
+	mtdcr (uic1pr, 0xffffffff);	/* Set Interrupt Polarities */
+	mtdcr (uic1tr, 0x001f8040);	/* Set Interrupt Trigger Levels */
+	mtdcr (uic1vr, 0x00000001);	/* Set Vect base=0,INT31 Highest
+					 * priority */
+	mtdcr (uic1sr, 0x00000000);	/* clear all interrupts */
+	mtdcr (uic1sr, 0xffffffff);	/* clear all interrupts */
+
+	mtdcr (uic0sr, 0xffffffff);	/* Clear all interrupts */
+	mtdcr (uic0er, 0x00000000);	/* disable all interrupts excepted
+					 * cascade to be checked */
+	mtdcr (uic0cr, 0x00104001);	/* Set Critical / Non Critical
+					 * interrupts */
+	mtdcr (uic0pr, 0xffffffff);	/* Set Interrupt Polarities */
+	mtdcr (uic0tr, 0x010f0004);	/* Set Interrupt Trigger Levels */
+	mtdcr (uic0vr, 0x00000001);	/* Set Vect base=0,INT31 Highest
+					 * priority */
+	mtdcr (uic0sr, 0x00000000);	/* clear all interrupts */
+	mtdcr (uic0sr, 0xffffffff);	/* clear all interrupts */
+
+	/* SDR0_MFR should be part of Ethernet init */
+	mfsdr (sdr_mfr, mfr);
+	mfr &= ~SDR0_MFR_ECS_MASK;
+	/*mtsdr(sdr_mfr, mfr);*/
+	fpga_init();
+
+	return 0;
+}
+
+int checkboard (void)
+{
+	char *s = getenv("serial#");
+
+	printf("Board: Yucca - AMCC 440SPe Evaluation Board");
+	if (s != NULL) {
+		puts(", serial# ");
+		puts(s);
+	}
+	putc('\n');
+
+	return 0;
+}
+
+static long int yucca_probe_for_dimms(void)
+{
+	long int 	dimm_installed[MAXDIMMS];
+	long int	dimm_num, probe_result;
+	long int	dimms_found = 0;
+	uchar		dimm_addr = IIC0_DIMM0_ADDR;
+
+	for (dimm_num = 0; dimm_num < MAXDIMMS; dimm_num++) {
+		/* check if there is a chip at the dimm address	*/
+		switch (dimm_num) {
+			case 0:
+				dimm_addr = IIC0_DIMM0_ADDR;
+				break;
+			case 1:
+				dimm_addr = IIC0_DIMM1_ADDR;
+				break;
+		}
+		probe_result = i2c_probe(dimm_addr);
+
+		if (probe_result == 0) {
+			dimm_installed[dimm_num] = TRUE;
+			dimms_found++;
+			debug("DIMM slot %d: DDR2 SDRAM detected\n",dimm_num);
+		} else {
+			dimm_installed[dimm_num] = FALSE;
+			debug("DIMM slot %d: Not populated or cannot sucessfully probe the DIMM\n", dimm_num);
+		}
+	}
+
+	if (dimms_found == 0) {
+		printf("ERROR - No memory installed.  Install a DDR-SDRAM DIMM.\n\n");
+		hang();
+	}
+
+	if (dimm_installed[0] != TRUE) {
+		printf("\nERROR - DIMM slot 0 must be populated before DIMM slot 1.\n");
+		printf("        Unsupported configuration. Move DIMM module from DIMM slot 1 to slot 0.\n\n");
+		hang();
+	}
+
+	return dimms_found;
+}
+
+/*************************************************************************
+ * init SDRAM controller with fixed value
+ * the initialization values are for 2x MICRON DDR2
+ * PN: MT18HTF6472DY-53EB2
+ * 512MB, DDR2, 533, CL4, ECC, REG
+ ************************************************************************/
+static long int fixed_sdram(void)
+{
+	long int yucca_dimms = 0;
+
+	yucca_dimms = yucca_probe_for_dimms();
+
+	/* SDRAM0_MCOPT2 (0X21) Clear DCEN BIT	*/
+	mtdcr( 0x10, 0x00000021 );
+	mtdcr( 0x11, 0x84000000 );
+
+	/* SDRAM0_MCOPT1 (0X20) ECC OFF / 64 bits / 4 banks / DDR2	*/
+	mtdcr( 0x10, 0x00000020 );
+	mtdcr( 0x11, 0x2D122000 );
+
+	/* SET MCIF0_CODT   Die Termination On	*/
+	mtdcr( 0x10, 0x00000026 );
+	if (yucca_dimms == 2)
+		mtdcr( 0x11, 0x2A800021 );
+	else if (yucca_dimms == 1)
+		mtdcr( 0x11, 0x02800021 );
+
+	/* On-Die Termination for Bank 0	*/
+	mtdcr( 0x10, 0x00000022 );
+	if (yucca_dimms == 2)
+		mtdcr( 0x11, 0x18000000 );
+	else if (yucca_dimms == 1)
+		mtdcr( 0x11, 0x06000000 );
+
+	/*	On-Die Termination for Bank 1	*/
+	mtdcr( 0x10, 0x00000023 );
+	if (yucca_dimms == 2)
+		mtdcr( 0x11, 0x18000000 );
+	else if (yucca_dimms == 1)
+		mtdcr( 0x11, 0x01800000 );
+
+	/*	On-Die Termination for Bank 2	*/
+	mtdcr( 0x10, 0x00000024 );
+	if (yucca_dimms == 2)
+		mtdcr( 0x11, 0x01800000 );
+	else if (yucca_dimms == 1)
+		mtdcr( 0x11, 0x00000000 );
+
+	/*	On-Die Termination for Bank 3	*/
+	mtdcr( 0x10, 0x00000025 );
+	if (yucca_dimms == 2)
+		mtdcr( 0x11, 0x01800000 );
+	else if (yucca_dimms == 1)
+		mtdcr( 0x11, 0x00000000 );
+
+	/* Refresh Time register (0x30) Refresh every 7.8125uS	*/
+	mtdcr( 0x10, 0x00000030 );
+	mtdcr( 0x11, 0x08200000 );
+
+	/* SET MCIF0_MMODE  	 CL 4	*/
+	mtdcr( 0x10, 0x00000088 );
+	mtdcr( 0x11, 0x00000642 );
+
+	/* MCIF0_MEMODE	*/
+	mtdcr( 0x10, 0x00000089 );
+	mtdcr( 0x11, 0x00000004 );
+
+	/*SET MCIF0_MB0CF 	*/
+	mtdcr( 0x10, 0x00000040 );
+	mtdcr( 0x11, 0x00000201 );
+
+	/* SET MCIF0_MB1CF 	*/
+	mtdcr( 0x10, 0x00000044 );
+	mtdcr( 0x11, 0x00000201 );
+
+	/* SET MCIF0_MB2CF 	*/
+	mtdcr( 0x10, 0x00000048 );
+	if (yucca_dimms == 2)
+		mtdcr( 0x11, 0x00000201 );
+	else if (yucca_dimms == 1)
+		mtdcr( 0x11, 0x00000000 );
+
+	/* SET MCIF0_MB3CF 	*/
+	mtdcr( 0x10, 0x0000004c );
+	if (yucca_dimms == 2)
+		mtdcr( 0x11, 0x00000201 );
+	else if (yucca_dimms == 1)
+		mtdcr( 0x11, 0x00000000 );
+
+	/* SET MCIF0_INITPLR0  # NOP		*/
+	mtdcr( 0x10, 0x00000050 );
+	mtdcr( 0x11, 0xB5380000 );
+
+	/* SET MCIF0_INITPLR1  # PRE		*/
+	mtdcr( 0x10, 0x00000051 );
+	mtdcr( 0x11, 0x82100400 );
+
+	/* SET MCIF0_INITPLR2  # EMR2		*/
+	mtdcr( 0x10, 0x00000052 );
+	mtdcr( 0x11, 0x80820000 );
+
+	/* SET MCIF0_INITPLR3  # EMR3		*/
+	mtdcr( 0x10, 0x00000053 );
+	mtdcr( 0x11, 0x80830000 );
+
+	/* SET MCIF0_INITPLR4  # EMR DLL ENABLE	*/
+	mtdcr( 0x10, 0x00000054 );
+	mtdcr( 0x11, 0x80810000 );
+
+	/* SET MCIF0_INITPLR5  # MR DLL RESET	*/
+	mtdcr( 0x10, 0x00000055 );
+	mtdcr( 0x11, 0x80800542 );
+
+	/* SET MCIF0_INITPLR6  # PRE		*/
+	mtdcr( 0x10, 0x00000056 );
+	mtdcr( 0x11, 0x82100400 );
+
+	/* SET MCIF0_INITPLR7  # Refresh	*/
+	mtdcr( 0x10, 0x00000057 );
+	mtdcr( 0x11, 0x8A080000 );
+
+	/* SET MCIF0_INITPLR8  # Refresh	*/
+	mtdcr( 0x10, 0x00000058 );
+	mtdcr( 0x11, 0x8A080000 );
+
+	/* SET MCIF0_INITPLR9  # Refresh	*/
+	mtdcr( 0x10, 0x00000059 );
+	mtdcr( 0x11, 0x8A080000 );
+
+	/* SET MCIF0_INITPLR10 # Refresh	*/
+	mtdcr( 0x10, 0x0000005A );
+	mtdcr( 0x11, 0x8A080000 );
+
+	/* SET MCIF0_INITPLR11 # MR		*/
+	mtdcr( 0x10, 0x0000005B );
+	mtdcr( 0x11, 0x80800442 );
+
+	/* SET MCIF0_INITPLR12 # EMR OCD Default*/
+	mtdcr( 0x10, 0x0000005C );
+	mtdcr( 0x11, 0x80810380 );
+
+	/* SET MCIF0_INITPLR13 # EMR OCD Exit	*/
+	mtdcr( 0x10, 0x0000005D );
+	mtdcr( 0x11, 0x80810000 );
+
+	/* 0x80: Adv Addr clock by 180 deg	*/
+	mtdcr( 0x10, 0x00000080 );
+	mtdcr( 0x11, 0x80000000 );
+
+	/* 0x21: Exit self refresh, set DC_EN	*/
+	mtdcr( 0x10, 0x00000021 );
+	mtdcr( 0x11, 0x28000000 );
+
+	/* 0x81: Write DQS Adv 90 + Fractional DQS Delay	*/
+	mtdcr( 0x10, 0x00000081 );
+	mtdcr( 0x11, 0x80000800 );
+
+	/* MCIF0_SDTR1	*/
+	mtdcr( 0x10, 0x00000085 );
+	mtdcr( 0x11, 0x80201000 );
+
+	/* MCIF0_SDTR2	*/
+	mtdcr( 0x10, 0x00000086 );
+	mtdcr( 0x11, 0x42103242 );
+
+	/* MCIF0_SDTR3	*/
+	mtdcr( 0x10, 0x00000087 );
+	mtdcr( 0x11, 0x0C100D14 );
+
+	/* SET MQ0_B0BAS  base addr 00000000 / 256MB	*/
+	mtdcr( 0x40, 0x0000F800 );
+
+	/* SET MQ0_B1BAS  base addr 10000000 / 256MB	*/
+	mtdcr( 0x41, 0x0400F800 );
+
+	/* SET MQ0_B2BAS  base addr 20000000 / 256MB	*/
+	if (yucca_dimms == 2)
+		mtdcr( 0x42, 0x0800F800 );
+	else if (yucca_dimms == 1)
+		mtdcr( 0x42, 0x00000000 );
+
+	/* SET MQ0_B3BAS  base addr 30000000 / 256MB	*/
+	if (yucca_dimms == 2)
+		mtdcr( 0x43, 0x0C00F800 );
+	else if (yucca_dimms == 1)
+		mtdcr( 0x43, 0x00000000 );
+
+	/* SDRAM_RQDC	*/
+	mtdcr( 0x10, 0x00000070 );
+	mtdcr( 0x11, 0x8000003F );
+
+	/* SDRAM_RDCC	*/
+	mtdcr( 0x10, 0x00000078 );
+	mtdcr( 0x11, 0x80000000 );
+
+	/* SDRAM_RFDC	*/
+	mtdcr( 0x10, 0x00000074 );
+	mtdcr( 0x11, 0x00000220 );
+
+	return (yucca_dimms * 512) << 20;
+}
+
+long int initdram (int board_type)
+{
+	long dram_size = 0;
+
+	dram_size = fixed_sdram();
+
+	return dram_size;
+}
+
+#if defined(CFG_DRAM_TEST)
+int testdram (void)
+{
+	uint *pstart = (uint *) 0x00000000;
+	uint *pend = (uint *) 0x08000000;
+	uint *p;
+
+	for (p = pstart; p < pend; p++)
+		*p = 0xaaaaaaaa;
+
+	for (p = pstart; p < pend; p++) {
+		if (*p != 0xaaaaaaaa) {
+			printf ("SDRAM test fails at: %08x\n", (uint) p);
+			return 1;
+		}
+	}
+
+	for (p = pstart; p < pend; p++)
+		*p = 0x55555555;
+
+	for (p = pstart; p < pend; p++) {
+		if (*p != 0x55555555) {
+			printf ("SDRAM test fails at: %08x\n", (uint) p);
+			return 1;
+		}
+	}
+	return 0;
+}
+#endif
+
+/*************************************************************************
+ *  pci_pre_init
+ *
+ *  This routine is called just prior to registering the hose and gives
+ *  the board the opportunity to check things. Returning a value of zero
+ *  indicates that things are bad & PCI initialization should be aborted.
+ *
+ *	Different boards may wish to customize the pci controller structure
+ *	(add regions, override default access routines, etc) or perform
+ *	certain pre-initialization actions.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
+int pci_pre_init(struct pci_controller * hose )
+{
+	unsigned long strap;
+
+	/*-------------------------------------------------------------------+
+	 *	The yucca board is always configured as the host & requires the
+	 *	PCI arbiter to be enabled.
+	 *-------------------------------------------------------------------*/
+	mfsdr(sdr_sdstp1, strap);
+	if( (strap & SDR0_SDSTP1_PAE_MASK) == 0 ) {
+		printf("PCI: SDR0_STRP1[%08lX] - PCI Arbiter disabled.\n",strap);
+		return 0;
+	}
+
+	return 1;
+}
+#endif	/* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
+
+/*************************************************************************
+ *  pci_target_init
+ *
+ *	The bootstrap configuration provides default settings for the pci
+ *	inbound map (PIM). But the bootstrap config choices are limited and
+ *	may not be sufficient for a given board.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+void pci_target_init(struct pci_controller * hose )
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	/*-------------------------------------------------------------------+
+	 * Disable everything
+	 *-------------------------------------------------------------------*/
+	out32r( PCIX0_PIM0SA, 0 ); /* disable */
+	out32r( PCIX0_PIM1SA, 0 ); /* disable */
+	out32r( PCIX0_PIM2SA, 0 ); /* disable */
+	out32r( PCIX0_EROMBA, 0 ); /* disable expansion rom */
+
+	/*-------------------------------------------------------------------+
+	 * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440
+	 * strapping options to not support sizes such as 128/256 MB.
+	 *-------------------------------------------------------------------*/
+	out32r( PCIX0_PIM0LAL, CFG_SDRAM_BASE );
+	out32r( PCIX0_PIM0LAH, 0 );
+	out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 );
+	out32r( PCIX0_BAR0, 0 );
+
+	/*-------------------------------------------------------------------+
+	 * Program the board's subsystem id/vendor id
+	 *-------------------------------------------------------------------*/
+	out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID );
+	out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID );
+
+	out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY );
+}
+#endif	/* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+
+/*************************************************************************
+ *  is_pci_host
+ *
+ *	This routine is called to determine if a pci scan should be
+ *	performed. With various hardware environments (especially cPCI and
+ *	PPMC) it's insufficient to depend on the state of the arbiter enable
+ *	bit in the strap register, or generic host/adapter assumptions.
+ *
+ *	Rather than hard-code a bad assumption in the general 440 code, the
+ *	440 pci code requires the board to decide at runtime.
+ *
+ *	Return 0 for adapter mode, non-zero for host (monarch) mode.
+ *
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI)
+int is_pci_host(struct pci_controller *hose)
+{
+	/* The yucca board is always configured as host. */
+	return 1;
+}
+#endif	/* defined(CONFIG_PCI) */
+
+int misc_init_f (void)
+{
+	uint reg;
+#if defined(CONFIG_STRESS)
+	uint i ;
+	uint disp;
+#endif
+
+	out16(FPGA_REG10, (in16(FPGA_REG10) &
+			~(FPGA_REG10_AUTO_NEG_DIS|FPGA_REG10_RESET_ETH)) |
+				FPGA_REG10_10MHZ_ENABLE |
+				FPGA_REG10_100MHZ_ENABLE |
+				FPGA_REG10_GIGABIT_ENABLE |
+				FPGA_REG10_FULL_DUPLEX );
+
+	udelay(10000);	/* wait 10ms */
+
+	out16(FPGA_REG10, (in16(FPGA_REG10) | FPGA_REG10_RESET_ETH));
+
+	/* minimal init for PCIe */
+	/* pci express 0 Endpoint Mode */
+	mfsdr(SDR0_PE0DLPSET, reg);
+	reg &= (~0x00400000);
+	mtsdr(SDR0_PE0DLPSET, reg);
+	/* pci express 1 Rootpoint  Mode */
+	mfsdr(SDR0_PE1DLPSET, reg);
+	reg |= 0x00400000;
+	mtsdr(SDR0_PE1DLPSET, reg);
+	/* pci express 2 Rootpoint  Mode */
+	mfsdr(SDR0_PE2DLPSET, reg);
+	reg |= 0x00400000;
+	mtsdr(SDR0_PE2DLPSET, reg);
+
+	out16(FPGA_REG1C,(in16 (FPGA_REG1C) &
+				~FPGA_REG1C_PE0_ROOTPOINT &
+				~FPGA_REG1C_PE1_ENDPOINT  &
+				~FPGA_REG1C_PE2_ENDPOINT));
+
+#if defined(CONFIG_STRESS)
+	/*
+	 * all this setting done by linux only needed by stress an charac. test
+	 * procedure
+	 * PCIe 1 Rootpoint PCIe2 Endpoint
+	 * PCIe 0 FIR Pre-emphasis Filter Coefficients & Transmit Driver
+	 * Power Level
+	 */
+	for (i = 0, disp = 0; i < 8; i++, disp += 3) {
+		mfsdr(SDR0_PE0HSSSET1L0 + disp, reg);
+		reg |= 0x33000000;
+		mtsdr(SDR0_PE0HSSSET1L0 + disp, reg);
+	}
+
+	/*
+	 * PCIe 1 FIR Pre-emphasis Filter Coefficients & Transmit Driver
+	 * Power Level
+	 */
+	for (i = 0, disp = 0; i < 4; i++, disp += 3) {
+		mfsdr(SDR0_PE1HSSSET1L0 + disp, reg);
+		reg |= 0x33000000;
+		mtsdr(SDR0_PE1HSSSET1L0 + disp, reg);
+	}
+
+	/*
+	 * PCIE 2 FIR Pre-emphasis Filter Coefficients & Transmit Driver
+	 * Power Level
+	 */
+	for (i = 0, disp = 0; i < 4; i++, disp += 3) {
+		mfsdr(SDR0_PE2HSSSET1L0 + disp, reg);
+		reg |= 0x33000000;
+		mtsdr(SDR0_PE2HSSSET1L0 + disp, reg);
+	}
+
+	reg = 0x21242222;
+	mtsdr(SDR0_PE2UTLSET1, reg);
+	reg = 0x11000000;
+	mtsdr(SDR0_PE2UTLSET2, reg);
+	/* pci express 1 Endpoint  Mode */
+	reg = 0x00004000;
+	mtsdr(SDR0_PE2DLPSET, reg);
+
+	mtsdr(SDR0_UART1, 0x2080005a);	/* patch for TG */
+#endif
+	return 0;
+}
+
+void fpga_init(void)
+{
+	/*
+	 * by default sdram access is disabled by fpga
+	 */
+	out16(FPGA_REG10, (in16 (FPGA_REG10) |
+				FPGA_REG10_SDRAM_ENABLE |
+				FPGA_REG10_ENABLE_DISPLAY ));
+
+	return;
+}
+
+#ifdef CONFIG_POST
+/*
+ * Returns 1 if keys pressed to start the power-on long-running tests
+ * Called from board_init_f().
+ */
+int post_hotkeys_pressed(void)
+{
+	return (ctrlc());
+}
+#endif
+
+/*---------------------------------------------------------------------------+
+ | onboard_pci_arbiter_selected => from EPLD
+ +---------------------------------------------------------------------------*/
+int onboard_pci_arbiter_selected(int core_pci)
+{
+#if 0
+	unsigned long onboard_pci_arbiter_sel;
+
+	onboard_pci_arbiter_sel = in16(FPGA_REG0) & FPGA_REG0_EXT_ARB_SEL_MASK;
+
+	if (onboard_pci_arbiter_sel == FPGA_REG0_EXT_ARB_SEL_EXTERNAL)
+		return (BOARD_OPTION_SELECTED);
+	else
+#endif
+	return (BOARD_OPTION_NOT_SELECTED);
+}
+
+/*---------------------------------------------------------------------------+
+ | ppcMfcpr.
+ +---------------------------------------------------------------------------*/
+unsigned long ppcMfcpr(unsigned long cpr_reg)
+{
+	unsigned long msr;
+	unsigned long cpr_cfgaddr_temp;
+	unsigned long cpr_value;
+
+	msr = (mfmsr () & ~(MSR_EE));
+	cpr_cfgaddr_temp =  mfdcr(CPR0_CFGADDR);
+	mtdcr(CPR0_CFGADDR, cpr_reg);
+	cpr_value =  mfdcr(CPR0_CFGDATA);
+	mtdcr(CPR0_CFGADDR, cpr_cfgaddr_temp);
+	mtmsr(msr);
+
+	return (cpr_value);
+}
+
+/*----------------------------------------------------------------------------+
+| Indirect Access of the System DCR's (SDR)
+| ppcMfsdr
++----------------------------------------------------------------------------*/
+unsigned long ppcMfsdr(unsigned long sdr_reg)
+{
+	unsigned long msr;
+	unsigned long sdr_cfgaddr_temp;
+	unsigned long sdr_value;
+
+	msr = (mfmsr () & ~(MSR_EE));
+	sdr_cfgaddr_temp =  mfdcr(SDR0_CFGADDR);
+	mtdcr(SDR0_CFGADDR, sdr_reg);
+	sdr_value =  mfdcr(SDR0_CFGDATA);
+	mtdcr(SDR0_CFGADDR, sdr_cfgaddr_temp);
+	mtmsr(msr);
+
+	return (sdr_value);
+}
diff --git a/board/amcc/yucca/yucca.h b/board/amcc/yucca/yucca.h
new file mode 100644
index 0000000000..66f75847d3
--- /dev/null
+++ b/board/amcc/yucca/yucca.h
@@ -0,0 +1,363 @@
+/*
+ * (C) Copyright 2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __YUCCA_H_
+#define __YUCCA_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*----------------------------------------------------------------------------+
+| Defines
++----------------------------------------------------------------------------*/
+
+#define TMR_FREQ_EXT		25000000
+#define BOARD_UART_CLOCK	11059200
+
+#define BOARD_OPTION_SELECTED		1
+#define BOARD_OPTION_NOT_SELECTED	0
+
+#define ENGINEERING_CLOCK_CHECKING "clk_chk"
+#define ENGINEERING_EXTERNAL_CLOCK "ext_clk"
+
+#define ENGINEERING_CLOCK_CHECKING_DATA	1
+#define ENGINEERING_EXTERNAL_CLOCK_DATA	2
+
+/* ethernet definition */
+#define MAX_ENETMODE_PARM	3
+#define ENETMODE_NEG		0
+#define ENETMODE_SPEED		1
+#define ENETMODE_DUPLEX		2
+
+#define ENETMODE_AUTONEG	0
+#define ENETMODE_NO_AUTONEG	1
+#define ENETMODE_10		2
+#define ENETMODE_100		3
+#define ENETMODE_1000		4
+#define ENETMODE_HALF		5
+#define ENETMODE_FULL		6
+
+#define NUM_TLB_ENTRIES          64
+
+/*----------------------------------------------------------------------------+
+| TLB specific defines.
++----------------------------------------------------------------------------*/
+#define TLB_256MB_ALIGN_MASK	0xF0000000
+#define TLB_16MB_ALIGN_MASK	0xFF000000
+#define TLB_1MB_ALIGN_MASK	0xFFF00000
+#define TLB_256KB_ALIGN_MASK	0xFFFC0000
+#define TLB_64KB_ALIGN_MASK	0xFFFF0000
+#define TLB_16KB_ALIGN_MASK	0xFFFFC000
+#define TLB_4KB_ALIGN_MASK	0xFFFFF000
+#define TLB_1KB_ALIGN_MASK	0xFFFFFC00
+#define TLB_256MB_SIZE		0x10000000
+#define TLB_16MB_SIZE		0x01000000
+#define TLB_1MB_SIZE		0x00100000
+#define TLB_256KB_SIZE		0x00040000
+#define TLB_64KB_SIZE		0x00010000
+#define TLB_16KB_SIZE		0x00004000
+#define TLB_4KB_SIZE		0x00001000
+#define TLB_1KB_SIZE		0x00000400
+
+#define TLB_WORD0_EPN_MASK	0xFFFFFC00
+#define TLB_WORD0_EPN_ENCODE(n) (((unsigned long)(n))&0xFFFFFC00)
+#define TLB_WORD0_EPN_DECODE(n) (((unsigned long)(n))&0xFFFFFC00)
+#define TLB_WORD0_V_MASK	0x00000200
+#define TLB_WORD0_V_ENABLE	0x00000200
+#define TLB_WORD0_V_DISABLE	0x00000000
+#define TLB_WORD0_TS_MASK	0x00000100
+#define TLB_WORD0_TS_1		0x00000100
+#define TLB_WORD0_TS_0		0x00000000
+#define TLB_WORD0_SIZE_MASK	0x000000F0
+#define TLB_WORD0_SIZE_1KB	0x00000000
+#define TLB_WORD0_SIZE_4KB	0x00000010
+#define TLB_WORD0_SIZE_16KB	0x00000020
+#define TLB_WORD0_SIZE_64KB	0x00000030
+#define TLB_WORD0_SIZE_256KB	0x00000040
+#define TLB_WORD0_SIZE_1MB	0x00000050
+#define TLB_WORD0_SIZE_16MB	0x00000070
+#define TLB_WORD0_SIZE_256MB	0x00000090
+#define TLB_WORD0_TPAR_MASK	0x0000000F
+#define TLB_WORD0_TPAR_ENCODE(n) ((((unsigned long)(n))&0x0F)<<0)
+#define TLB_WORD0_TPAR_DECODE(n) ((((unsigned long)(n))>>0)&0x0F)
+
+#define TLB_WORD1_RPN_MASK	0xFFFFFC00
+#define TLB_WORD1_RPN_ENCODE(n) (((unsigned long)(n))&0xFFFFFC00)
+#define TLB_WORD1_RPN_DECODE(n) (((unsigned long)(n))&0xFFFFFC00)
+#define TLB_WORD1_PAR1_MASK	0x00000300
+#define TLB_WORD1_PAR1_ENCODE(n) ((((unsigned long)(n))&0x03)<<8)
+#define TLB_WORD1_PAR1_DECODE(n) ((((unsigned long)(n))>>8)&0x03)
+#define TLB_WORD1_PAR1_0	0x00000000
+#define TLB_WORD1_PAR1_1	0x00000100
+#define TLB_WORD1_PAR1_2	0x00000200
+#define TLB_WORD1_PAR1_3	0x00000300
+#define TLB_WORD1_ERPN_MASK	0x0000000F
+#define TLB_WORD1_ERPN_ENCODE(n) ((((unsigned long)(n))&0x0F)<<0)
+#define TLB_WORD1_ERPN_DECODE(n) ((((unsigned long)(n))>>0)&0x0F)
+
+#define TLB_WORD2_PAR2_MASK	0xC0000000
+#define TLB_WORD2_PAR2_ENCODE(n) ((((unsigned long)(n))&0x03)<<30)
+#define TLB_WORD2_PAR2_DECODE(n) ((((unsigned long)(n))>>30)&0x03)
+#define TLB_WORD2_PAR2_0	0x00000000
+#define TLB_WORD2_PAR2_1	0x40000000
+#define TLB_WORD2_PAR2_2	0x80000000
+#define TLB_WORD2_PAR2_3	0xC0000000
+#define TLB_WORD2_U0_MASK	0x00008000
+#define TLB_WORD2_U0_ENABLE	0x00008000
+#define TLB_WORD2_U0_DISABLE	0x00000000
+#define TLB_WORD2_U1_MASK	0x00004000
+#define TLB_WORD2_U1_ENABLE	0x00004000
+#define TLB_WORD2_U1_DISABLE	0x00000000
+#define TLB_WORD2_U2_MASK	0x00002000
+#define TLB_WORD2_U2_ENABLE	0x00002000
+#define TLB_WORD2_U2_DISABLE	0x00000000
+#define TLB_WORD2_U3_MASK	0x00001000
+#define TLB_WORD2_U3_ENABLE	0x00001000
+#define TLB_WORD2_U3_DISABLE	0x00000000
+#define TLB_WORD2_W_MASK	0x00000800
+#define TLB_WORD2_W_ENABLE	0x00000800
+#define TLB_WORD2_W_DISABLE	0x00000000
+#define TLB_WORD2_I_MASK	0x00000400
+#define TLB_WORD2_I_ENABLE	0x00000400
+#define TLB_WORD2_I_DISABLE	0x00000000
+#define TLB_WORD2_M_MASK	0x00000200
+#define TLB_WORD2_M_ENABLE	0x00000200
+#define TLB_WORD2_M_DISABLE	0x00000000
+#define TLB_WORD2_G_MASK	0x00000100
+#define TLB_WORD2_G_ENABLE	0x00000100
+#define TLB_WORD2_G_DISABLE	0x00000000
+#define TLB_WORD2_E_MASK	0x00000080
+#define TLB_WORD2_E_ENABLE	0x00000080
+#define TLB_WORD2_E_DISABLE	0x00000000
+#define TLB_WORD2_UX_MASK	0x00000020
+#define TLB_WORD2_UX_ENABLE	0x00000020
+#define TLB_WORD2_UX_DISABLE	0x00000000
+#define TLB_WORD2_UW_MASK	0x00000010
+#define TLB_WORD2_UW_ENABLE	0x00000010
+#define TLB_WORD2_UW_DISABLE	0x00000000
+#define TLB_WORD2_UR_MASK	0x00000008
+#define TLB_WORD2_UR_ENABLE	0x00000008
+#define TLB_WORD2_UR_DISABLE	0x00000000
+#define TLB_WORD2_SX_MASK	0x00000004
+#define TLB_WORD2_SX_ENABLE	0x00000004
+#define TLB_WORD2_SX_DISABLE	0x00000000
+#define TLB_WORD2_SW_MASK	0x00000002
+#define TLB_WORD2_SW_ENABLE	0x00000002
+#define TLB_WORD2_SW_DISABLE	0x00000000
+#define TLB_WORD2_SR_MASK	0x00000001
+#define TLB_WORD2_SR_ENABLE	0x00000001
+#define TLB_WORD2_SR_DISABLE	0x00000000
+
+/*----------------------------------------------------------------------------+
+| Board specific defines.
++----------------------------------------------------------------------------*/
+#define NONCACHE_MEMORY_SIZE     (64*1024)
+#define NONCACHE_AREA0_ENDOFFSET (64*1024)
+#define NONCACHE_AREA1_ENDOFFSET (32*1024)
+
+#define FLASH_SECTORSIZE	0x00010000
+
+/* SDRAM MICRON */
+#define SDRAM_MICRON		0x2C
+
+#define SDRAM_TRUE		1
+#define SDRAM_FALSE		0
+#define SDRAM_DDR1		1
+#define SDRAM_DDR2		2
+#define SDRAM_NONE		0
+#define MAXDIMMS		2		/* Changes le 12/01/05 pour 1.6 */
+#define MAXRANKS		4		/* Changes le 12/01/05 pour 1.6 */
+#define MAXBANKSPERDIMM		2
+#define MAXRANKSPERDIMM		2
+#define MAXBXCF			4		/* Changes le 12/01/05 pour 1.6 */
+#define MAXSDRAMMEMORY		0xFFFFFFFF	/* 4GB */
+#define ERROR_STR_LENGTH	256
+#define MAX_SPD_BYTES		256		/* Max number of bytes on the DIMM's SPD EEPROM */
+
+/*----------------------------------------------------------------------------+
+| SDR Configuration registers
++----------------------------------------------------------------------------*/
+/* Serial Device Strap Reg 0 */
+#define sdr_pstrp0	0x0040
+
+#define	SDR0_SDSTP1_EBC_ROM_BS_MASK	0x00000080 /* EBC Boot bus width Mask */
+#define	SDR0_SDSTP1_EBC_ROM_BS_16BIT	0x00000080 /* EBC 16 Bits */
+#define	SDR0_SDSTP1_EBC_ROM_BS_8BIT	0x00000000 /* EBC  8 Bits */
+
+#define	SDR0_SDSTP1_BOOT_SEL_MASK	0x00080000 /* Boot device Selection Mask */
+#define	SDR0_SDSTP1_BOOT_SEL_EBC	0x00000000 /* EBC */
+#define	SDR0_SDSTP1_BOOT_SEL_PCI	0x00080000 /* PCI */
+
+#define	SDR0_SDSTP1_EBC_SIZE_MASK	0x00000060 /* Boot rom size Mask */
+#define	SDR0_SDSTP1_BOOT_SIZE_16MB	0x00000060 /* 16 MB */
+#define	SDR0_SDSTP1_BOOT_SIZE_8MB	0x00000040 /*  8 MB */
+#define	SDR0_SDSTP1_BOOT_SIZE_4MB	0x00000020 /*  4 MB */
+#define	SDR0_SDSTP1_BOOT_SIZE_2MB	0x00000000 /*  2 MB */
+
+/* Serial Device Enabled - Addr = 0xA8 */
+#define SDR0_PSTRP0_BOOTSTRAP_IIC_A8_EN SDR0_PSTRP0_BOOTSTRAP_SETTINGS5
+/* Serial Device Enabled - Addr = 0xA4 */
+#define SDR0_PSTRP0_BOOTSTRAP_IIC_A4_EN SDR0_PSTRP0_BOOTSTRAP_SETTINGS7
+
+/* Pin Straps Reg */
+#define SDR0_PSTRP0			0x0040
+#define SDR0_PSTRP0_BOOTSTRAP_MASK	0xE0000000  /* Strap Bits */
+
+#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS0	0x00000000  /* Default strap settings 0 */
+#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS1	0x20000000  /* Default strap settings 1 */
+#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS2	0x40000000  /* Default strap settings 2 */
+#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS3	0x60000000  /* Default strap settings 3 */
+#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS4	0x80000000  /* Default strap settings 4 */
+#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS5	0xA0000000  /* Default strap settings 5 */
+#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS6	0xC0000000  /* Default strap settings 6 */
+#define SDR0_PSTRP0_BOOTSTRAP_SETTINGS7	0xE0000000  /* Default strap settings 7 */
+
+/* fpgareg - defines are in include/config/YUCCA.h */
+
+#define SDR0_CUST0_ENET3_MASK		0x00000080
+#define SDR0_CUST0_ENET3_COPPER		0x00000000
+#define SDR0_CUST0_ENET3_FIBER		0x00000080
+#define SDR0_CUST0_RGMII3_MASK		0x00000070
+#define SDR0_CUST0_RGMII3_ENCODE(n)	((((unsigned long)(n))&0x7)<<4)
+#define SDR0_CUST0_RGMII3_DECODE(n)	((((unsigned long)(n))>>4)&0x07)
+#define SDR0_CUST0_RGMII3_DISAB		0x00000000
+#define SDR0_CUST0_RGMII3_RTBI		0x00000040
+#define SDR0_CUST0_RGMII3_RGMII		0x00000050
+#define SDR0_CUST0_RGMII3_TBI		0x00000060
+#define SDR0_CUST0_RGMII3_GMII		0x00000070
+#define SDR0_CUST0_ENET2_MASK		0x00000008
+#define SDR0_CUST0_ENET2_COPPER		0x00000000
+#define SDR0_CUST0_ENET2_FIBER		0x00000008
+#define SDR0_CUST0_RGMII2_MASK		0x00000007
+#define SDR0_CUST0_RGMII2_ENCODE(n)	((((unsigned long)(n))&0x7)<<0)
+#define SDR0_CUST0_RGMII2_DECODE(n)	((((unsigned long)(n))>>0)&0x07)
+#define SDR0_CUST0_RGMII2_DISAB		0x00000000
+#define SDR0_CUST0_RGMII2_RTBI		0x00000004
+#define SDR0_CUST0_RGMII2_RGMII		0x00000005
+#define SDR0_CUST0_RGMII2_TBI		0x00000006
+#define SDR0_CUST0_RGMII2_GMII		0x00000007
+
+#define ONE_MILLION			1000000
+#define ONE_BILLION			1000000000
+
+/*----------------------------------------------------------------------------+
+|                               X
+|                              XX
+| XX  XXX   XXXXX   XX XXX    XXXXX
+| XX  XX        X    XXX XX    XX
+| XX  XX   XXXXXX    XX        XX
+| XX  XX   X   XX    XX        XX XX
+|  XXX XX  XXXXX X  XXXX        XXX
++----------------------------------------------------------------------------*/
+/*----------------------------------------------------------------------------+
+| Declare Configuration values
++----------------------------------------------------------------------------*/
+
+typedef enum config_selection {
+	CONFIG_NOT_SELECTED,
+	CONFIG_SELECTED
+} config_selection_t;
+
+typedef enum config_list {
+	UART2_IN_SERVICE_MODE,
+	CPU_TRACE_MODE,
+	UART1_CTS_RTS,
+	CONFIG_NB
+} config_list_t;
+
+#define MAX_CONFIG_SELECT_NB			3
+
+#define BOARD_INFO_UART2_IN_SERVICE_MODE	1
+#define BOARD_INFO_CPU_TRACE_MODE		2
+#define BOARD_INFO_UART1_CTS_RTS_MODE		4
+
+void force_bup_config_selection(config_selection_t *confgi_select_P);
+void update_config_selection_table(config_selection_t *config_select_P);
+void display_config_selection(config_selection_t *config_select_P);
+
+/*----------------------------------------------------------------------------+
+|                     XX
+|
+|   XXXX    XX XXX   XXX     XXXX
+|  XX        XX  XX   XX    XX  XX
+|  XX  XXX   XX  XX   XX    XX  XX
+|  XX  XX    XXXXX    XX    XX  XX
+|   XXXX     XX      XXXX    XXXX
+|           XXXX
+|
+|
+|
+| +------------------------------------------------------------------+
+| |  GPIO/Secondary func | Primary Function | I/O | Alternate1 | I/O |
+| +----------------------+------------------+-----+------------+-----+
+| |                      |                  |     |            |     |
+| | GPIO0_0              | PCIX0REQ2_N      | I/O |  TRCCLK    |     |
+| | GPIO0_1              | PCIX0REQ3_N      | I/O |  TRCBS0    |     |
+| | GPIO0_2              | PCIX0GNT2_N      | I/O |  TRCBS1    |     |
+| | GPIO0_3              | PCIX0GNT3_N      | I/O |  TRCBS2    |     |
+| | GPIO0_4              | PCIX1REQ2_N      | I/O |  TRCES0    |     |
+| | GPIO0_5              | PCIX1REQ3_N      | I/O |  TRCES1    |     |
+| | GPIO0_6              | PCIX1GNT2_N      | I/O |  TRCES2    | NA  |
+| | GPIO0_7              | PCIX1GNT3_N      | I/O |  TRCES3    | NA  |
+| | GPIO0_8              | PERREADY         |  I  |  TRCES4    | NA  |
+| | GPIO0_9              | PERCS1_N         |  O  |  TRCTS0    | NA  |
+| | GPIO0_10             | PERCS2_N         |  O  |  TRCTS1    | NA  |
+| | GPIO0_11             | IRQ0             |  I  |  TRCTS2    | NA  |
+| | GPIO0_12             | IRQ1             |  I  |  TRCTS3    | NA  |
+| | GPIO0_13             | IRQ2             |  I  |  TRCTS4    | NA  |
+| | GPIO0_14             | IRQ3             |  I  |  TRCTS5    | NA  |
+| | GPIO0_15             | IRQ4             |  I  |  TRCTS6    | NA  |
+| | GPIO0_16             | IRQ5             |  I  |  UART2RX   |  I  |
+| | GPIO0_17             | PERBE0_N         |  O  |  UART2TX   |  O  |
+| | GPIO0_18             | PCI0GNT0_N       | I/O |  NA        | NA  |
+| | GPIO0_19             | PCI0GNT1_N       | I/O |  NA        | NA  |
+| | GPIO0_20             | PCI0REQ0_N       | I/O |  NA        | NA  |
+| | GPIO0_21             | PCI0REQ1_N       | I/O |  NA        | NA  |
+| | GPIO0_22             | PCI1GNT0_N       | I/O |  NA        | NA  |
+| | GPIO0_23             | PCI1GNT1_N       | I/O |  NA        | NA  |
+| | GPIO0_24             | PCI1REQ0_N       | I/O |  NA        | NA  |
+| | GPIO0_25             | PCI1REQ1_N       | I/O |  NA        | NA  |
+| | GPIO0_26             | PCI2GNT0_N       | I/O |  NA        | NA  |
+| | GPIO0_27             | PCI2GNT1_N       | I/O |  NA        | NA  |
+| | GPIO0_28             | PCI2REQ0_N       | I/O |  NA        | NA  |
+| | GPIO0_29             | PCI2REQ1_N       | I/O |  NA        | NA  |
+| | GPIO0_30             | UART1RX          |  I  |  NA        | NA  |
+| | GPIO0_31             | UART1TX          |  O  |  NA        | NA  |
+| |                      |                  |     |            |     |
+| +----------------------+------------------+-----+------------+-----+
+|
++----------------------------------------------------------------------------*/
+
+unsigned long auto_calc_speed(void);
+/*----------------------------------------------------------------------------+
+| Prototypes
++----------------------------------------------------------------------------*/
+void print_evb440spe_info(void);
+
+int onboard_pci_arbiter_selected(int core_pci);
+
+#ifdef __cplusplus
+}
+#endif
+#endif /* __YUCCA_H_ */
diff --git a/board/atc/Makefile b/board/atc/Makefile
index 7a2014d466..7573a0c771 100644
--- a/board/atc/Makefile
+++ b/board/atc/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= lib$(BOARD).a
 
-OBJS	= $(BOARD).o flash.o
+OBJS	= $(BOARD).o flash.o ti113x.o
 
 $(LIB):	.depend $(OBJS)
 	$(AR) crv $@ $(OBJS)
diff --git a/board/atc/ti113x.c b/board/atc/ti113x.c
new file mode 100644
index 0000000000..d5e935c400
--- /dev/null
+++ b/board/atc/ti113x.c
@@ -0,0 +1,637 @@
+/*
+ * (C) Copyright 2003-2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ ********************************************************************
+ *
+ * Lots of code copied from:
+ *
+ * i82365.c 1.352 - Linux driver for Intel 82365 and compatible
+ * PC Card controllers, and Yenta-compatible PCI-to-CardBus controllers.
+ * (C) 1999 David A. Hinds <dahinds@users.sourceforge.net>
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_I82365
+
+#include <command.h>
+#include <pci.h>
+#include <pcmcia.h>
+#include <asm/io.h>
+
+#include <pcmcia/ss.h>
+#include <pcmcia/i82365.h>
+#include <pcmcia/yenta.h>
+#include <pcmcia/ti113x.h>
+
+static struct pci_device_id supported[] = {
+	{PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1510},
+	{0, 0}
+};
+
+#define CYCLE_TIME	120
+
+#ifdef DEBUG
+static void i82365_dump_regions (pci_dev_t dev);
+#endif
+
+typedef struct socket_info_t {
+	pci_dev_t	dev;
+	u_short		bcr;
+	u_char		pci_lat, cb_lat, sub_bus, cache;
+	u_int		cb_phys;
+
+	socket_cap_t	cap;
+	u_short		type;
+	u_int		flags;
+	ti113x_state_t	state;
+} socket_info_t;
+
+static socket_info_t socket;
+static socket_state_t state;
+static struct pccard_mem_map mem;
+static struct pccard_io_map io;
+
+/*====================================================================*/
+
+/* Some PCI shortcuts */
+
+static int pci_readb (socket_info_t * s, int r, u_char * v)
+{
+	return pci_read_config_byte (s->dev, r, v);
+}
+static int pci_writeb (socket_info_t * s, int r, u_char v)
+{
+	return pci_write_config_byte (s->dev, r, v);
+}
+static int pci_readw (socket_info_t * s, int r, u_short * v)
+{
+	return pci_read_config_word (s->dev, r, v);
+}
+static int pci_writew (socket_info_t * s, int r, u_short v)
+{
+	return pci_write_config_word (s->dev, r, v);
+}
+static int pci_readl (socket_info_t * s, int r, u_int * v)
+{
+	return pci_read_config_dword (s->dev, r, v);
+}
+static int pci_writel (socket_info_t * s, int r, u_int v)
+{
+	return pci_write_config_dword (s->dev, r, v);
+}
+
+/*====================================================================*/
+
+#define cb_readb(s, r)		readb((s)->cb_phys + (r))
+#define cb_readl(s, r)		readl((s)->cb_phys + (r))
+#define cb_writeb(s, r, v)	writeb(v, (s)->cb_phys + (r))
+#define cb_writel(s, r, v)	writel(v, (s)->cb_phys + (r))
+
+static u_char i365_get (socket_info_t * s, u_short reg)
+{
+	return cb_readb (s, 0x0800 + reg);
+}
+
+static void i365_set (socket_info_t * s, u_short reg, u_char data)
+{
+	cb_writeb (s, 0x0800 + reg, data);
+}
+
+static void i365_bset (socket_info_t * s, u_short reg, u_char mask)
+{
+	i365_set (s, reg, i365_get (s, reg) | mask);
+}
+
+static void i365_bclr (socket_info_t * s, u_short reg, u_char mask)
+{
+	i365_set (s, reg, i365_get (s, reg) & ~mask);
+}
+
+#if 0	/* not used */
+static void i365_bflip (socket_info_t * s, u_short reg, u_char mask, int b)
+{
+	u_char d = i365_get (s, reg);
+
+	i365_set (s, reg, (b) ? (d | mask) : (d & ~mask));
+}
+
+static u_short i365_get_pair (socket_info_t * s, u_short reg)
+{
+	return (i365_get (s, reg) + (i365_get (s, reg + 1) << 8));
+}
+#endif	/* not used */
+
+static void i365_set_pair (socket_info_t * s, u_short reg, u_short data)
+{
+	i365_set (s, reg, data & 0xff);
+	i365_set (s, reg + 1, data >> 8);
+}
+
+/*======================================================================
+
+    Code to save and restore global state information for TI 1130 and
+    TI 1131 controllers, and to set and report global configuration
+    options.
+
+======================================================================*/
+
+static void ti113x_get_state (socket_info_t * s)
+{
+	ti113x_state_t *p = &s->state;
+
+	pci_readl (s, TI113X_SYSTEM_CONTROL, &p->sysctl);
+	pci_readb (s, TI113X_CARD_CONTROL, &p->cardctl);
+	pci_readb (s, TI113X_DEVICE_CONTROL, &p->devctl);
+	pci_readb (s, TI1250_DIAGNOSTIC, &p->diag);
+	pci_readl (s, TI12XX_IRQMUX, &p->irqmux);
+}
+
+static void ti113x_set_state (socket_info_t * s)
+{
+	ti113x_state_t *p = &s->state;
+
+	pci_writel (s, TI113X_SYSTEM_CONTROL, p->sysctl);
+	pci_writeb (s, TI113X_CARD_CONTROL, p->cardctl);
+	pci_writeb (s, TI113X_DEVICE_CONTROL, p->devctl);
+	pci_writeb (s, TI1250_MULTIMEDIA_CTL, 0);
+	pci_writeb (s, TI1250_DIAGNOSTIC, p->diag);
+	pci_writel (s, TI12XX_IRQMUX, p->irqmux);
+	i365_set_pair (s, TI113X_IO_OFFSET (0), 0);
+	i365_set_pair (s, TI113X_IO_OFFSET (1), 0);
+}
+
+static u_int ti113x_set_opts (socket_info_t * s)
+{
+	ti113x_state_t *p = &s->state;
+	u_int mask = 0xffff;
+
+	p->cardctl &= ~TI113X_CCR_ZVENABLE;
+	p->cardctl |= TI113X_CCR_SPKROUTEN;
+
+	return mask;
+}
+
+/*======================================================================
+
+    Routines to handle common CardBus options
+
+======================================================================*/
+
+/* Default settings for PCI command configuration register */
+#define CMD_DFLT (PCI_COMMAND_IO|PCI_COMMAND_MEMORY| \
+		  PCI_COMMAND_MASTER|PCI_COMMAND_WAIT)
+
+static void cb_get_state (socket_info_t * s)
+{
+	pci_readb (s, PCI_CACHE_LINE_SIZE, &s->cache);
+	pci_readb (s, PCI_LATENCY_TIMER, &s->pci_lat);
+	pci_readb (s, CB_LATENCY_TIMER, &s->cb_lat);
+	pci_readb (s, CB_CARDBUS_BUS, &s->cap.cardbus);
+	pci_readb (s, CB_SUBORD_BUS, &s->sub_bus);
+	pci_readw (s, CB_BRIDGE_CONTROL, &s->bcr);
+}
+
+static void cb_set_state (socket_info_t * s)
+{
+	pci_writel (s, CB_LEGACY_MODE_BASE, 0);
+	pci_writel (s, PCI_BASE_ADDRESS_0, s->cb_phys);
+	pci_writew (s, PCI_COMMAND, CMD_DFLT);
+	pci_writeb (s, PCI_CACHE_LINE_SIZE, s->cache);
+	pci_writeb (s, PCI_LATENCY_TIMER, s->pci_lat);
+	pci_writeb (s, CB_LATENCY_TIMER, s->cb_lat);
+	pci_writeb (s, CB_CARDBUS_BUS, s->cap.cardbus);
+	pci_writeb (s, CB_SUBORD_BUS, s->sub_bus);
+	pci_writew (s, CB_BRIDGE_CONTROL, s->bcr);
+}
+
+static void cb_set_opts (socket_info_t * s)
+{
+	if (s->cache == 0)
+		s->cache = 8;
+	if (s->pci_lat == 0)
+		s->pci_lat = 0xa8;
+	if (s->cb_lat == 0)
+		s->cb_lat = 0xb0;
+}
+
+/*======================================================================
+
+    Power control for Cardbus controllers: used both for 16-bit and
+    Cardbus cards.
+
+======================================================================*/
+
+static int cb_set_power (socket_info_t * s, socket_state_t * state)
+{
+	u_int reg = 0;
+
+	/* restart card voltage detection if it seems appropriate */
+	if ((state->Vcc == 0) && (state->Vpp == 0) &&
+	   !(cb_readl (s, CB_SOCKET_STATE) & CB_SS_VSENSE))
+		cb_writel (s, CB_SOCKET_FORCE, CB_SF_CVSTEST);
+	switch (state->Vcc) {
+	case 0:
+		reg = 0;
+		break;
+	case 33:
+		reg = CB_SC_VCC_3V;
+		break;
+	case 50:
+		reg = CB_SC_VCC_5V;
+		break;
+	default:
+		return -1;
+	}
+	switch (state->Vpp) {
+	case 0:
+		break;
+	case 33:
+		reg |= CB_SC_VPP_3V;
+		break;
+	case 50:
+		reg |= CB_SC_VPP_5V;
+		break;
+	case 120:
+		reg |= CB_SC_VPP_12V;
+		break;
+	default:
+		return -1;
+	}
+	if (reg != cb_readl (s, CB_SOCKET_CONTROL))
+		cb_writel (s, CB_SOCKET_CONTROL, reg);
+
+	return 0;
+}
+
+/*======================================================================
+
+    Generic routines to get and set controller options
+
+======================================================================*/
+
+static void get_bridge_state (socket_info_t * s)
+{
+	ti113x_get_state (s);
+	cb_get_state (s);
+}
+
+static void set_bridge_state (socket_info_t * s)
+{
+	cb_set_state (s);
+	i365_set (s, I365_GBLCTL, 0x00);
+	i365_set (s, I365_GENCTL, 0x00);
+	ti113x_set_state (s);
+}
+
+static void set_bridge_opts (socket_info_t * s)
+{
+	ti113x_set_opts (s);
+	cb_set_opts (s);
+}
+
+/*====================================================================*/
+#define PD67_EXT_INDEX		0x2e	/* Extension index */
+#define PD67_EXT_DATA		0x2f	/* Extension data */
+#define PD67_EXD_VS1(s)		(0x01 << ((s)<<1))
+
+#define pd67_ext_get(s, r) \
+    (i365_set(s, PD67_EXT_INDEX, r), i365_get(s, PD67_EXT_DATA))
+
+static int i365_get_status (socket_info_t * s, u_int * value)
+{
+	u_int status;
+
+	status = i365_get (s, I365_IDENT);
+	status = i365_get (s, I365_STATUS);
+	*value = ((status & I365_CS_DETECT) == I365_CS_DETECT) ? SS_DETECT : 0;
+	if (i365_get (s, I365_INTCTL) & I365_PC_IOCARD) {
+		*value |= (status & I365_CS_STSCHG) ? 0 : SS_STSCHG;
+	} else {
+		*value |= (status & I365_CS_BVD1) ? 0 : SS_BATDEAD;
+		*value |= (status & I365_CS_BVD2) ? 0 : SS_BATWARN;
+	}
+	*value |= (status & I365_CS_WRPROT) ? SS_WRPROT : 0;
+	*value |= (status & I365_CS_READY) ? SS_READY : 0;
+	*value |= (status & I365_CS_POWERON) ? SS_POWERON : 0;
+
+	status = cb_readl (s, CB_SOCKET_STATE);
+	*value |= (status & CB_SS_32BIT) ? SS_CARDBUS : 0;
+	*value |= (status & CB_SS_3VCARD) ? SS_3VCARD : 0;
+	*value |= (status & CB_SS_XVCARD) ? SS_XVCARD : 0;
+	*value |= (status & CB_SS_VSENSE) ? 0 : SS_PENDING;
+	/* For now, ignore cards with unsupported voltage keys */
+	if (*value & SS_XVCARD)
+		*value &= ~(SS_DETECT | SS_3VCARD | SS_XVCARD);
+
+	return 0;
+}	/* i365_get_status */
+
+static int i365_set_socket (socket_info_t * s, socket_state_t * state)
+{
+	u_char reg;
+
+	set_bridge_state (s);
+
+	/* IO card, RESET flag */
+	reg = 0;
+	reg |= (state->flags & SS_RESET) ? 0 : I365_PC_RESET;
+	reg |= (state->flags & SS_IOCARD) ? I365_PC_IOCARD : 0;
+	i365_set (s, I365_INTCTL, reg);
+
+	reg = I365_PWR_NORESET;
+	if (state->flags & SS_PWR_AUTO)
+		reg |= I365_PWR_AUTO;
+	if (state->flags & SS_OUTPUT_ENA)
+		reg |= I365_PWR_OUT;
+
+	cb_set_power (s, state);
+	reg |= i365_get (s, I365_POWER) & (I365_VCC_MASK | I365_VPP1_MASK);
+
+	if (reg != i365_get (s, I365_POWER))
+		i365_set (s, I365_POWER, reg);
+
+	return 0;
+}	/* i365_set_socket */
+
+/*====================================================================*/
+
+static int i365_set_mem_map (socket_info_t * s, struct pccard_mem_map *mem)
+{
+	u_short base, i;
+	u_char map;
+
+	debug ("i82365: SetMemMap(%d, %#2.2x, %d ns, %#5.5lx-%#5.5lx, %#5.5x)\n",
+		mem->map, mem->flags, mem->speed,
+		mem->sys_start, mem->sys_stop, mem->card_start);
+
+	map = mem->map;
+	if ((map > 4) ||
+	    (mem->card_start > 0x3ffffff) ||
+	    (mem->sys_start > mem->sys_stop) ||
+	    (mem->speed > 1000)) {
+		return -1;
+	}
+
+	/* Turn off the window before changing anything */
+	if (i365_get (s, I365_ADDRWIN) & I365_ENA_MEM (map))
+		i365_bclr (s, I365_ADDRWIN, I365_ENA_MEM (map));
+
+	/* Take care of high byte, for PCI controllers */
+	i365_set (s, CB_MEM_PAGE (map), mem->sys_start >> 24);
+
+	base = I365_MEM (map);
+	i = (mem->sys_start >> 12) & 0x0fff;
+	if (mem->flags & MAP_16BIT)
+		i |= I365_MEM_16BIT;
+	if (mem->flags & MAP_0WS)
+		i |= I365_MEM_0WS;
+	i365_set_pair (s, base + I365_W_START, i);
+
+	i = (mem->sys_stop >> 12) & 0x0fff;
+	switch (mem->speed / CYCLE_TIME) {
+	case 0:
+		break;
+	case 1:
+		i |= I365_MEM_WS0;
+		break;
+	case 2:
+		i |= I365_MEM_WS1;
+		break;
+	default:
+		i |= I365_MEM_WS1 | I365_MEM_WS0;
+		break;
+	}
+	i365_set_pair (s, base + I365_W_STOP, i);
+
+	i = ((mem->card_start - mem->sys_start) >> 12) & 0x3fff;
+	if (mem->flags & MAP_WRPROT)
+		i |= I365_MEM_WRPROT;
+	if (mem->flags & MAP_ATTRIB)
+		i |= I365_MEM_REG;
+	i365_set_pair (s, base + I365_W_OFF, i);
+
+	/* Turn on the window if necessary */
+	if (mem->flags & MAP_ACTIVE)
+		i365_bset (s, I365_ADDRWIN, I365_ENA_MEM (map));
+	return 0;
+}	/* i365_set_mem_map */
+
+static int i365_set_io_map (socket_info_t * s, struct pccard_io_map *io)
+{
+	u_char map, ioctl;
+
+	map = io->map;
+	/* comment out: comparison is always false due to limited range of data type */
+	if ((map > 1) || /* (io->start > 0xffff) || (io->stop > 0xffff) || */
+	    (io->stop < io->start))
+		return -1;
+	/* Turn off the window before changing anything */
+	if (i365_get (s, I365_ADDRWIN) & I365_ENA_IO (map))
+		i365_bclr (s, I365_ADDRWIN, I365_ENA_IO (map));
+	i365_set_pair (s, I365_IO (map) + I365_W_START, io->start);
+	i365_set_pair (s, I365_IO (map) + I365_W_STOP, io->stop);
+	ioctl = i365_get (s, I365_IOCTL) & ~I365_IOCTL_MASK (map);
+	if (io->speed)
+		ioctl |= I365_IOCTL_WAIT (map);
+	if (io->flags & MAP_0WS)
+		ioctl |= I365_IOCTL_0WS (map);
+	if (io->flags & MAP_16BIT)
+		ioctl |= I365_IOCTL_16BIT (map);
+	if (io->flags & MAP_AUTOSZ)
+		ioctl |= I365_IOCTL_IOCS16 (map);
+	i365_set (s, I365_IOCTL, ioctl);
+	/* Turn on the window if necessary */
+	if (io->flags & MAP_ACTIVE)
+		i365_bset (s, I365_ADDRWIN, I365_ENA_IO (map));
+	return 0;
+}	/* i365_set_io_map */
+
+/*====================================================================*/
+
+int i82365_init (void)
+{
+	u_int val;
+	int i;
+
+	if ((socket.dev = pci_find_devices (supported, 0)) < 0) {
+		/* Controller not found */
+		return 1;
+	}
+	debug ("i82365 Device Found!\n");
+
+	pci_read_config_dword (socket.dev, PCI_BASE_ADDRESS_0, &socket.cb_phys);
+	socket.cb_phys &= ~0xf;
+
+	get_bridge_state (&socket);
+	set_bridge_opts (&socket);
+
+	i = i365_get_status (&socket, &val);
+
+	if (val & SS_DETECT) {
+		if (val & SS_3VCARD) {
+			state.Vcc = state.Vpp = 33;
+			puts (" 3.3V card found: ");
+		} else if (!(val & SS_XVCARD)) {
+			state.Vcc = state.Vpp = 50;
+			puts (" 5.0V card found: ");
+		} else {
+			puts ("i82365: unsupported voltage key\n");
+			state.Vcc = state.Vpp = 0;
+		}
+	} else {
+		/* No card inserted */
+		puts ("No card\n");
+		return 1;
+	}
+
+	state.flags = SS_IOCARD | SS_OUTPUT_ENA;
+	state.csc_mask = 0;
+	state.io_irq = 0;
+
+	i365_set_socket (&socket, &state);
+
+	for (i = 500; i; i--) {
+		if ((i365_get (&socket, I365_STATUS) & I365_CS_READY))
+			break;
+		udelay (1000);
+	}
+
+	if (i == 0) {
+		/* PC Card not ready for data transfer */
+		puts ("i82365 PC Card not ready for data transfer\n");
+		return 1;
+	}
+	debug (" PC Card ready for data transfer: ");
+
+	mem.map = 0;
+	mem.flags = MAP_ATTRIB | MAP_ACTIVE;
+	mem.speed = 300;
+	mem.sys_start = CFG_PCMCIA_MEM_ADDR;
+	mem.sys_stop = CFG_PCMCIA_MEM_ADDR + CFG_PCMCIA_MEM_SIZE - 1;
+	mem.card_start = 0;
+	i365_set_mem_map (&socket, &mem);
+
+	io.map = 0;
+	io.flags = MAP_AUTOSZ | MAP_ACTIVE;
+	io.speed = 0;
+	io.start = 0x0100;
+	io.stop = 0x010F;
+	i365_set_io_map (&socket, &io);
+
+#ifdef DEBUG
+	i82365_dump_regions (socket.dev);
+#endif
+
+	return 0;
+}
+
+void i82365_exit (void)
+{
+	io.map = 0;
+	io.flags = 0;
+	io.speed = 0;
+	io.start = 0;
+	io.stop = 0x1;
+
+	i365_set_io_map (&socket, &io);
+
+	mem.map = 0;
+	mem.flags = 0;
+	mem.speed = 0;
+	mem.sys_start = 0;
+	mem.sys_stop = 0x1000;
+	mem.card_start = 0;
+
+	i365_set_mem_map (&socket, &mem);
+
+	socket.state.sysctl &= 0xFFFF00FF;
+
+	state.Vcc = state.Vpp = 0;
+
+	i365_set_socket (&socket, &state);
+}
+
+int pcmcia_on (void)
+{
+	u_int rc;
+
+	debug ("Enable PCMCIA " PCMCIA_SLOT_MSG "\n");
+
+	rc = i82365_init();
+	if (rc)
+		goto exit;
+
+	rc = check_ide_device(0);
+	if (rc == 0)
+		goto exit;
+
+	i82365_exit();
+
+exit:
+	return rc;
+}
+
+#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+int pcmcia_off (void)
+{
+	printf ("Disable PCMCIA " PCMCIA_SLOT_MSG "\n");
+
+	i82365_exit();
+
+	return 0;
+}
+#endif
+
+/*======================================================================
+
+    Debug stuff
+
+======================================================================*/
+
+#ifdef DEBUG
+static void i82365_dump_regions (pci_dev_t dev)
+{
+	u_int tmp[2];
+	u_int *mem = (void *) socket.cb_phys;
+	u_char *cis = (void *) CFG_PCMCIA_MEM_ADDR;
+	u_char *ide = (void *) (CFG_ATA_BASE_ADDR + CFG_ATA_REG_OFFSET);
+
+	pci_read_config_dword (dev, 0x00, tmp + 0);
+	pci_read_config_dword (dev, 0x80, tmp + 1);
+
+	printf ("PCI CONF: %08X ... %08X\n",
+		tmp[0], tmp[1]);
+	printf ("PCI MEM:  ... %08X ... %08X\n",
+		mem[0x8 / 4], mem[0x800 / 4]);
+	printf ("CIS:      ...%c%c%c%c%c%c%c%c...\n",
+		cis[0x38], cis[0x3a], cis[0x3c], cis[0x3e],
+		cis[0x40], cis[0x42], cis[0x44], cis[0x48]);
+	printf ("CIS CONF: %02X %02X %02X ...\n",
+		cis[0x200], cis[0x202], cis[0x204]);
+	printf ("IDE:      %02X %02X %02X %02X %02X %02X %02X %02X\n",
+		ide[0], ide[1], ide[2], ide[3],
+		ide[4], ide[5], ide[6], ide[7]);
+}
+#endif	/* DEBUG */
+
+#endif /* CONFIG_I82365 */
diff --git a/board/c2mon/Makefile b/board/c2mon/Makefile
index 7a2014d466..7b2b545820 100644
--- a/board/c2mon/Makefile
+++ b/board/c2mon/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= lib$(BOARD).a
 
-OBJS	= $(BOARD).o flash.o
+OBJS	= $(BOARD).o flash.o pcmcia.o
 
 $(LIB):	.depend $(OBJS)
 	$(AR) crv $@ $(OBJS)
diff --git a/board/c2mon/pcmcia.c b/board/c2mon/pcmcia.c
new file mode 100644
index 0000000000..5e50c4d9bc
--- /dev/null
+++ b/board/c2mon/pcmcia.c
@@ -0,0 +1,284 @@
+#include <common.h>
+#include <mpc8xx.h>
+#include <pcmcia.h>
+
+#undef	CONFIG_PCMCIA
+
+#if	(CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+#define	CONFIG_PCMCIA
+#endif
+
+#if	(CONFIG_COMMANDS & CFG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD)
+#define	CONFIG_PCMCIA
+#endif
+
+#ifdef	CONFIG_PCMCIA
+
+#define PCMCIA_BOARD_MSG "C2MON"
+
+static void cfg_ports (void)
+{
+	volatile immap_t	*immap;
+	volatile cpm8xx_t	*cp;
+	ushort sreg;
+
+	immap = (immap_t *)CFG_IMMR;
+	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
+
+	/*
+	* Configure Port C for TPS2211 PC-Card Power-Interface Switch
+	*
+	* Switch off all voltages, assert shutdown
+	*/
+	sreg = immap->im_ioport.iop_pcdat;
+	sreg |=  (TPS2211_VPPD0 | TPS2211_VPPD1);	/* VAVPP => Hi-Z */
+	sreg &= ~(TPS2211_VCCD0 | TPS2211_VCCD1);	/* 3V and 5V off */
+	immap->im_ioport.iop_pcdat = sreg;
+
+	immap->im_ioport.iop_pcpar &= ~(TPS2211_OUTPUTS);
+	immap->im_ioport.iop_pcdir |=   TPS2211_OUTPUTS;
+
+	debug ("Set Port C: PAR:     %04x DIR:     %04x DAT:     %04x\n",
+	       immap->im_ioport.iop_pcpar,
+	       immap->im_ioport.iop_pcdir,
+	       immap->im_ioport.iop_pcdat);
+
+	/*
+	* Configure Port B for TPS2211 PC-Card Power-Interface Switch
+	*
+	* Over-Current Input only
+	*/
+	cp->cp_pbpar &= ~(TPS2211_INPUTS);
+	cp->cp_pbdir &= ~(TPS2211_INPUTS);
+
+	debug ("Set Port B: PAR: %08x DIR: %08x DAT: %08x\n",
+	       cp->cp_pbpar, cp->cp_pbdir, cp->cp_pbdat);
+}
+
+int pcmcia_hardware_enable(int slot)
+{
+	volatile immap_t	*immap;
+	volatile cpm8xx_t	*cp;
+	volatile pcmconf8xx_t	*pcmp;
+	volatile sysconf8xx_t	*sysp;
+	uint reg, pipr, mask;
+	ushort sreg;
+	int i;
+
+	debug ("hardware_enable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
+
+	udelay(10000);
+
+	immap = (immap_t *)CFG_IMMR;
+	sysp  = (sysconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_siu_conf));
+	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
+
+	/* Configure Ports for TPS2211A PC-Card Power-Interface Switch */
+	cfg_ports ();
+
+	/*
+	* Configure SIUMCR to enable PCMCIA port B
+	* (VFLS[0:1] are not used for debugging, we connect FRZ# instead)
+	*/
+	sysp->sc_siumcr &= ~SIUMCR_DBGC11;	/* set DBGC to 00 */
+
+	/* clear interrupt state, and disable interrupts */
+	pcmp->pcmc_pscr =  PCMCIA_MASK(_slot_);
+	pcmp->pcmc_per &= ~PCMCIA_MASK(_slot_);
+
+	/*
+	* Disable interrupts, DMA, and PCMCIA buffers
+	* (isolate the interface) and assert RESET signal
+	*/
+	debug ("Disable PCMCIA buffers and assert RESET\n");
+	reg  = 0;
+	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX(_slot_) = reg;
+	udelay(500);
+
+	/*
+	* Make sure there is a card in the slot, then configure the interface.
+	*/
+	udelay(10000);
+	debug ("[%d] %s: PIPR(%p)=0x%x\n",
+	       __LINE__,__FUNCTION__,
+	       &(pcmp->pcmc_pipr),pcmp->pcmc_pipr);
+	if (pcmp->pcmc_pipr & (0x18000000 >> (slot << 4))) {
+		printf ("   No Card found\n");
+		return (1);
+	}
+
+	/*
+	* Power On: Set VAVCC to 3.3V or 5V, set VAVPP to Hi-Z
+	*/
+	mask = PCMCIA_VS1(slot) | PCMCIA_VS2(slot);
+	pipr = pcmp->pcmc_pipr;
+	debug ("PIPR: 0x%x ==> VS1=o%s, VS2=o%s\n",
+	       pipr,
+	       (reg&PCMCIA_VS1(slot))?"n":"ff",
+	       (reg&PCMCIA_VS2(slot))?"n":"ff");
+
+	sreg = immap->im_ioport.iop_pcdat;
+	if ((pipr & mask) == mask) {
+		sreg |=  (TPS2211_VPPD0 | TPS2211_VPPD1 |	/* VAVPP => Hi-Z */
+				TPS2211_VCCD1);			/* 5V on	*/
+		sreg &= ~(TPS2211_VCCD0);			/* 3V off	*/
+		puts (" 5.0V card found: ");
+	} else {
+		sreg |=  (TPS2211_VPPD0 | TPS2211_VPPD1 |	/* VAVPP => Hi-Z */
+				TPS2211_VCCD0);			/* 3V on	*/
+		sreg &= ~(TPS2211_VCCD1);			/* 5V off	*/
+		puts (" 3.3V card found: ");
+	}
+
+	debug ("\nPC DAT: %04x -> 3.3V %s 5.0V %s\n",
+	       sreg,
+	       ( (sreg & TPS2211_VCCD0) && !(sreg & TPS2211_VCCD1)) ? "on" : "off",
+	       (!(sreg & TPS2211_VCCD0) &&  (sreg & TPS2211_VCCD1)) ? "on" : "off"
+	      );
+
+	immap->im_ioport.iop_pcdat = sreg;
+
+	/*  Wait 500 ms; use this to check for over-current */
+	for (i=0; i<5000; ++i) {
+		if ((cp->cp_pbdat & TPS2211_OC) == 0) {
+			printf ("   *** Overcurrent - Safety shutdown ***\n");
+			immap->im_ioport.iop_pcdat &= ~(TPS2211_VCCD0|TPS2211_VCCD1);
+			return (1);
+		}
+		udelay (100);
+	}
+
+	debug ("Enable PCMCIA buffers and stop RESET\n");
+	reg  =  PCMCIA_PGCRX(_slot_);
+	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg &= ~__MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX(_slot_) = reg;
+
+	udelay(250000);	/* some cards need >150 ms to come up :-( */
+
+	debug ("# hardware_enable done\n");
+
+	return (0);
+}
+
+
+#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+int pcmcia_hardware_disable(int slot)
+{
+	volatile immap_t	*immap;
+	volatile cpm8xx_t	*cp;
+	volatile pcmconf8xx_t	*pcmp;
+	u_long reg;
+
+	debug ("hardware_disable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
+
+	immap = (immap_t *)CFG_IMMR;
+	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+
+	/* Configure PCMCIA General Control Register */
+	debug ("Disable PCMCIA buffers and assert RESET\n");
+	reg  = 0;
+	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX(_slot_) = reg;
+
+	/* ALl voltages off / Hi-Z */
+	immap->im_ioport.iop_pcdat |= (TPS2211_VPPD0 | TPS2211_VPPD1 |
+			TPS2211_VCCD0 | TPS2211_VCCD1 );
+
+	udelay(10000);
+
+	return (0);
+}
+#endif	/* CFG_CMD_PCMCIA */
+
+
+int pcmcia_voltage_set(int slot, int vcc, int vpp)
+{
+	volatile immap_t	*immap;
+	volatile cpm8xx_t	*cp;
+	volatile pcmconf8xx_t	*pcmp;
+	u_long reg;
+	ushort sreg;
+
+	debug ("voltage_set: "
+			PCMCIA_BOARD_MSG
+			" Slot %c, Vcc=%d.%d, Vpp=%d.%d\n",
+	'A'+slot, vcc/10, vcc%10, vpp/10, vcc%10);
+
+	immap = (immap_t *)CFG_IMMR;
+	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
+	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+	/*
+	* Disable PCMCIA buffers (isolate the interface)
+	* and assert RESET signal
+	*/
+	debug ("Disable PCMCIA buffers and assert RESET\n");
+	reg  = PCMCIA_PGCRX(_slot_);
+	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX(_slot_) = reg;
+	udelay(500);
+
+	/*
+	* Configure Port C pins for
+	* 5 Volts Enable and 3 Volts enable,
+	* Turn all power pins to Hi-Z
+	*/
+	debug ("PCMCIA power OFF\n");
+	cfg_ports ();	/* Enables switch, but all in Hi-Z */
+
+	sreg  = immap->im_ioport.iop_pcdat;
+	sreg |= TPS2211_VPPD0 | TPS2211_VPPD1;		/* VAVPP always Hi-Z */
+
+	switch(vcc) {
+		case  0: 			break;	/* Switch off		*/
+		case 33: sreg |=  TPS2211_VCCD0;	/* Switch on 3.3V	*/
+		sreg &= ~TPS2211_VCCD1;
+		break;
+		case 50: sreg &= ~TPS2211_VCCD0;	/* Switch on 5.0V	*/
+		sreg |=  TPS2211_VCCD1;
+		break;
+		default: 			goto done;
+	}
+
+	/* Checking supported voltages */
+
+	debug ("PIPR: 0x%x --> %s\n",
+	       pcmp->pcmc_pipr,
+	       (pcmp->pcmc_pipr & 0x00008000) ? "only 5 V" : "can do 3.3V");
+
+	immap->im_ioport.iop_pcdat = sreg;
+
+#ifdef DEBUG
+{
+	char *s;
+
+	if ((sreg & TPS2211_VCCD0) && !(sreg & TPS2211_VCCD1)) {
+		s = "at 3.3V";
+	} else if (!(sreg & TPS2211_VCCD0) &&  (sreg & TPS2211_VCCD1)) {
+		s = "at 5.0V";
+	} else {
+		s = "down";
+	}
+	printf ("PCMCIA powered %s\n", s);
+}
+#endif
+
+done:
+	debug ("Enable PCMCIA buffers and stop RESET\n");
+	reg  =  PCMCIA_PGCRX(_slot_);
+	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg &= ~__MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX(_slot_) = reg;
+	udelay(500);
+
+	debug ("voltage_set: " PCMCIA_BOARD_MSG " Slot %c, DONE\n",
+	       slot+'A');
+	return (0);
+}
+
+#endif	/* CONFIG_PCMCIA */
diff --git a/board/cpc45/pd67290.c b/board/cpc45/pd67290.c
index c84fbae918..6ca3e7bd7a 100644
--- a/board/cpc45/pd67290.c
+++ b/board/cpc45/pd67290.c
@@ -1,4 +1,6 @@
-/* pd67290.c - system configuration module for SPD67290
+/*
+ * (C) Copyright 2003-2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -18,51 +20,799 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  *
- * (C) 2004 DENX Software Engineering, Heiko Schocher <hs@denx.de>
+ ********************************************************************
+ *
+ * Lots of code copied from:
+ *
+ * i82365.c 1.352 - Linux driver for Intel 82365 and compatible
+ * PC Card controllers, and Yenta-compatible PCI-to-CardBus controllers.
+ * (C) 1999 David A. Hinds <dahinds@users.sourceforge.net>
  */
 
 #include <common.h>
-#include <malloc.h>
-#include <net.h>
-#include <asm/io.h>
+
+#ifdef CONFIG_I82365
+
+#include <command.h>
 #include <pci.h>
+#include <pcmcia.h>
+#include <asm/io.h>
 
-/* imports */
-#include <mpc824x.h>
+#include <pcmcia/ss.h>
+#include <pcmcia/i82365.h>
+#include <pcmcia/yenta.h>
+#include <pcmcia/cirrus.h>
 
 static struct pci_device_id supported[] = {
 	{PCI_VENDOR_ID_CIRRUS, PCI_DEVICE_ID_CIRRUS_6729},
-	{}
+	{0, 0}
+};
+
+#define CYCLE_TIME	120
+
+#ifdef DEBUG
+static void i82365_dump_regions (pci_dev_t dev);
+#endif
+
+typedef struct socket_info_t {
+	pci_dev_t	dev;
+	u_short		bcr;
+	u_char		pci_lat, cb_lat, sub_bus, cache;
+	u_int		cb_phys;
+
+	socket_cap_t	cap;
+	u_short		type;
+	u_int		flags;
+	cirrus_state_t	c_state;
+} socket_info_t;
+
+/* These definitions must match the pcic table! */
+typedef enum pcic_id {
+	IS_PD6710, IS_PD672X, IS_VT83C469
+} pcic_id;
+
+typedef struct pcic_t {
+	char *name;
+} pcic_t;
+
+static pcic_t pcic[] = {
+	{" Cirrus PD6710: "},
+	{" Cirrus PD672x: "},
+	{" VIA VT83C469: "},
 };
 
-/***************************************************************************
-*
-* SPD67290Init -
-*
-* RETURNS: -1 on error, 0 if OK
-*/
+static socket_info_t socket;
+static socket_state_t state;
+static struct pccard_mem_map mem;
+static struct pccard_io_map io;
 
-int SPD67290Init (void)
+/*====================================================================*/
+
+/* Some PCI shortcuts */
+
+static int pci_readb (socket_info_t * s, int r, u_char * v)
+{
+	return pci_read_config_byte (s->dev, r, v);
+}
+static int pci_writeb (socket_info_t * s, int r, u_char v)
+{
+	return pci_write_config_byte (s->dev, r, v);
+}
+static int pci_readw (socket_info_t * s, int r, u_short * v)
+{
+	return pci_read_config_word (s->dev, r, v);
+}
+static int pci_writew (socket_info_t * s, int r, u_short v)
 {
-	pci_dev_t devno;
-	int idx = 0;		/* general index */
-	ulong membaseCsr;	/* base address of device memory space */
+	return pci_write_config_word (s->dev, r, v);
+}
 
-	/* find PD67290 device */
-	if ((devno = pci_find_devices (supported, idx++)) < 0) {
-		printf ("No PD67290 device found !!\n");
+/*====================================================================*/
+
+#define cb_readb(s)		readb((s)->cb_phys + 1)
+#define cb_writeb(s, v)		writeb(v, (s)->cb_phys)
+#define cb_writeb2(s, v)	writeb(v, (s)->cb_phys + 1)
+#define cb_readl(s, r)		readl((s)->cb_phys + (r))
+#define cb_writel(s, r, v)	writel(v, (s)->cb_phys + (r))
+
+
+static u_char i365_get (socket_info_t * s, u_short reg)
+{
+	u_char val;
+#ifdef CONFIG_PCMCIA_SLOT_A
+	int slot = 0;
+#else
+	int slot = 1;
+#endif
+
+	val = I365_REG (slot, reg);
+
+	cb_writeb (s, val);
+	val = cb_readb (s);
+
+	debug ("i365_get slot:%x reg: %x val: %x\n", slot, reg, val);
+	return val;
+}
+
+static void i365_set (socket_info_t * s, u_short reg, u_char data)
+{
+#ifdef CONFIG_PCMCIA_SLOT_A
+	int slot = 0;
+#else
+	int slot = 1;
+#endif
+	u_char val;
+
+	val = I365_REG (slot, reg);
+
+	cb_writeb (s, val);
+	cb_writeb2 (s, data);
+
+	debug ("i365_set slot:%x reg: %x data:%x\n", slot, reg, data);
+}
+
+static void i365_bset (socket_info_t * s, u_short reg, u_char mask)
+{
+	i365_set (s, reg, i365_get (s, reg) | mask);
+}
+
+static void i365_bclr (socket_info_t * s, u_short reg, u_char mask)
+{
+	i365_set (s, reg, i365_get (s, reg) & ~mask);
+}
+
+#if 0	/* not used */
+static void i365_bflip (socket_info_t * s, u_short reg, u_char mask, int b)
+{
+	u_char d = i365_get (s, reg);
+
+	i365_set (s, reg, (b) ? (d | mask) : (d & ~mask));
+}
+
+static u_short i365_get_pair (socket_info_t * s, u_short reg)
+{
+	return (i365_get (s, reg) + (i365_get (s, reg + 1) << 8));
+}
+#endif	/* not used */
+
+static void i365_set_pair (socket_info_t * s, u_short reg, u_short data)
+{
+	i365_set (s, reg, data & 0xff);
+	i365_set (s, reg + 1, data >> 8);
+}
+
+/*======================================================================
+
+    Code to save and restore global state information for Cirrus
+    PD67xx controllers, and to set and report global configuration
+    options.
+
+======================================================================*/
+
+#define flip(v,b,f) (v = ((f)<0) ? v : ((f) ? ((v)|(b)) : ((v)&(~b))))
+
+static void cirrus_get_state (socket_info_t * s)
+{
+	int i;
+	cirrus_state_t *p = &s->c_state;
+
+	p->misc1 = i365_get (s, PD67_MISC_CTL_1);
+	p->misc1 &= (PD67_MC1_MEDIA_ENA | PD67_MC1_INPACK_ENA);
+	p->misc2 = i365_get (s, PD67_MISC_CTL_2);
+	for (i = 0; i < 6; i++)
+		p->timer[i] = i365_get (s, PD67_TIME_SETUP (0) + i);
+
+}
+
+static void cirrus_set_state (socket_info_t * s)
+{
+	int i;
+	u_char misc;
+	cirrus_state_t *p = &s->c_state;
+
+	misc = i365_get (s, PD67_MISC_CTL_2);
+	i365_set (s, PD67_MISC_CTL_2, p->misc2);
+	if (misc & PD67_MC2_SUSPEND)
+		udelay (50000);
+	misc = i365_get (s, PD67_MISC_CTL_1);
+	misc &= ~(PD67_MC1_MEDIA_ENA | PD67_MC1_INPACK_ENA);
+	i365_set (s, PD67_MISC_CTL_1, misc | p->misc1);
+	for (i = 0; i < 6; i++)
+		i365_set (s, PD67_TIME_SETUP (0) + i, p->timer[i]);
+}
+
+static u_int cirrus_set_opts (socket_info_t * s)
+{
+	cirrus_state_t *p = &s->c_state;
+	u_int mask = 0xffff;
+#if DEBUG
+	char buf[200];
+
+	memset (buf, 0, 200);
+#endif
+
+	if (has_ring == -1)
+		has_ring = 1;
+	flip (p->misc2, PD67_MC2_IRQ15_RI, has_ring);
+	flip (p->misc2, PD67_MC2_DYNAMIC_MODE, dynamic_mode);
+#if DEBUG
+	if (p->misc2 & PD67_MC2_IRQ15_RI)
+		strcat (buf, " [ring]");
+	if (p->misc2 & PD67_MC2_DYNAMIC_MODE)
+		strcat (buf, " [dyn mode]");
+	if (p->misc1 & PD67_MC1_INPACK_ENA)
+		strcat (buf, " [inpack]");
+#endif
+
+	if (p->misc2 & PD67_MC2_IRQ15_RI)
+		mask &= ~0x8000;
+	if (has_led > 0) {
+#if DEBUG
+		strcat (buf, " [led]");
+#endif
+		mask &= ~0x1000;
+	}
+	if (has_dma > 0) {
+#if DEBUG
+		strcat (buf, " [dma]");
+#endif
+		mask &= ~0x0600;
+		flip (p->misc2, PD67_MC2_FREQ_BYPASS, freq_bypass);
+#if DEBUG
+		if (p->misc2 & PD67_MC2_FREQ_BYPASS)
+			strcat (buf, " [freq bypass]");
+#endif
+	}
+
+	if (setup_time >= 0)
+		p->timer[0] = p->timer[3] = setup_time;
+	if (cmd_time > 0) {
+		p->timer[1] = cmd_time;
+		p->timer[4] = cmd_time * 2 + 4;
+	}
+	if (p->timer[1] == 0) {
+		p->timer[1] = 6;
+		p->timer[4] = 16;
+		if (p->timer[0] == 0)
+			p->timer[0] = p->timer[3] = 1;
+	}
+	if (recov_time >= 0)
+		p->timer[2] = p->timer[5] = recov_time;
+
+	debug ("i82365 Opt: %s [%d/%d/%d] [%d/%d/%d]\n",
+		buf,
+		p->timer[0], p->timer[1], p->timer[2],
+		p->timer[3], p->timer[4], p->timer[5]);
+
+	return mask;
+}
+
+/*======================================================================
+
+    Routines to handle common CardBus options
+
+======================================================================*/
+
+/* Default settings for PCI command configuration register */
+#define CMD_DFLT (PCI_COMMAND_IO|PCI_COMMAND_MEMORY| \
+		  PCI_COMMAND_MASTER|PCI_COMMAND_WAIT)
+
+static void cb_get_state (socket_info_t * s)
+{
+	pci_readb (s, PCI_CACHE_LINE_SIZE, &s->cache);
+	pci_readb (s, PCI_LATENCY_TIMER, &s->pci_lat);
+	pci_readb (s, CB_LATENCY_TIMER, &s->cb_lat);
+	pci_readb (s, CB_CARDBUS_BUS, &s->cap.cardbus);
+	pci_readb (s, CB_SUBORD_BUS, &s->sub_bus);
+	pci_readw (s, CB_BRIDGE_CONTROL, &s->bcr);
+}
+
+static void cb_set_state (socket_info_t * s)
+{
+	pci_writew (s, PCI_COMMAND, CMD_DFLT);
+	pci_writeb (s, PCI_CACHE_LINE_SIZE, s->cache);
+	pci_writeb (s, PCI_LATENCY_TIMER, s->pci_lat);
+	pci_writeb (s, CB_LATENCY_TIMER, s->cb_lat);
+	pci_writeb (s, CB_CARDBUS_BUS, s->cap.cardbus);
+	pci_writeb (s, CB_SUBORD_BUS, s->sub_bus);
+	pci_writew (s, CB_BRIDGE_CONTROL, s->bcr);
+}
+
+static void cb_set_opts (socket_info_t * s)
+{
+}
+
+/*======================================================================
+
+    Power control for Cardbus controllers: used both for 16-bit and
+    Cardbus cards.
+
+======================================================================*/
+
+static int cb_set_power (socket_info_t * s, socket_state_t * state)
+{
+	u_int reg = 0;
+
+	reg = I365_PWR_NORESET;
+	if (state->flags & SS_PWR_AUTO)
+		reg |= I365_PWR_AUTO;
+	if (state->flags & SS_OUTPUT_ENA)
+		reg |= I365_PWR_OUT;
+	if (state->Vpp != 0) {
+		if (state->Vpp == 120) {
+			reg |= I365_VPP1_12V;
+			puts (" 12V card found: ");
+		} else if (state->Vpp == state->Vcc) {
+			reg |= I365_VPP1_5V;
+		} else {
+			puts (" power not found: ");
+			return -1;
+		}
+	}
+	if (state->Vcc != 0) {
+		reg |= I365_VCC_5V;
+		if (state->Vcc == 33) {
+			puts (" 3.3V card found: ");
+			i365_bset (s, PD67_MISC_CTL_1, PD67_MC1_VCC_3V);
+		} else if (state->Vcc == 50) {
+			puts (" 5V card found: ");
+			i365_bclr (s, PD67_MISC_CTL_1, PD67_MC1_VCC_3V);
+		} else {
+			puts (" power not found: ");
+			return -1;
+		}
+	}
+
+	if (reg != i365_get (s, I365_POWER)) {
+		reg = (I365_PWR_OUT | I365_PWR_NORESET | I365_VCC_5V | I365_VPP1_5V);
+		i365_set (s, I365_POWER, reg);
+	}
+
+	return 0;
+}
+
+/*======================================================================
+
+    Generic routines to get and set controller options
+
+======================================================================*/
+
+static void get_bridge_state (socket_info_t * s)
+{
+	cirrus_get_state (s);
+	cb_get_state (s);
+}
+
+static void set_bridge_state (socket_info_t * s)
+{
+	cb_set_state (s);
+	i365_set (s, I365_GBLCTL, 0x00);
+	i365_set (s, I365_GENCTL, 0x00);
+	cirrus_set_state (s);
+}
+
+static void set_bridge_opts (socket_info_t * s)
+{
+	cirrus_set_opts (s);
+	cb_set_opts (s);
+}
+
+/*====================================================================*/
+#define PD67_EXT_INDEX		0x2e	/* Extension index */
+#define PD67_EXT_DATA		0x2f	/* Extension data */
+#define PD67_EXD_VS1(s)		(0x01 << ((s)<<1))
+
+#define pd67_ext_get(s, r) \
+    (i365_set(s, PD67_EXT_INDEX, r), i365_get(s, PD67_EXT_DATA))
+
+static int i365_get_status (socket_info_t * s, u_int * value)
+{
+	u_int status;
+	u_char val;
+	u_char power, vcc, vpp;
+	u_int powerstate;
+
+	status = i365_get (s, I365_IDENT);
+	status = i365_get (s, I365_STATUS);
+	*value = ((status & I365_CS_DETECT) == I365_CS_DETECT) ? SS_DETECT : 0;
+	if (i365_get (s, I365_INTCTL) & I365_PC_IOCARD) {
+		*value |= (status & I365_CS_STSCHG) ? 0 : SS_STSCHG;
+	} else {
+		*value |= (status & I365_CS_BVD1) ? 0 : SS_BATDEAD;
+		*value |= (status & I365_CS_BVD2) ? 0 : SS_BATWARN;
+	}
+	*value |= (status & I365_CS_WRPROT) ? SS_WRPROT : 0;
+	*value |= (status & I365_CS_READY) ? SS_READY : 0;
+	*value |= (status & I365_CS_POWERON) ? SS_POWERON : 0;
+
+	/* Check for Cirrus CL-PD67xx chips */
+	i365_set (s, PD67_CHIP_INFO, 0);
+	val = i365_get (s, PD67_CHIP_INFO);
+	s->type = -1;
+	if ((val & PD67_INFO_CHIP_ID) == PD67_INFO_CHIP_ID) {
+		val = i365_get (s, PD67_CHIP_INFO);
+		if ((val & PD67_INFO_CHIP_ID) == 0) {
+			s->type = (val & PD67_INFO_SLOTS) ? IS_PD672X : IS_PD6710;
+			i365_set (s, PD67_EXT_INDEX, 0xe5);
+			if (i365_get (s, PD67_EXT_INDEX) != 0xe5)
+				s->type = IS_VT83C469;
+		}
+	} else {
+		printf ("no Cirrus Chip found\n");
+		*value = 0;
 		return -1;
 	}
-	/* - 0xfe000000 see MPC 8245 Users Manual Adress Map B */
-	membaseCsr = PCMCIA_IO_BASE - 0xfe000000;
+
+	power = i365_get (s, I365_POWER);
+	state.flags |= (power & I365_PWR_AUTO) ? SS_PWR_AUTO : 0;
+	state.flags |= (power & I365_PWR_OUT) ? SS_OUTPUT_ENA : 0;
+	vcc = power & I365_VCC_MASK;
+	vpp = power & I365_VPP1_MASK;
+	state.Vcc = state.Vpp = 0;
+	if((vcc== 0) || (vpp == 0)) {
+		/*
+		 * On the Cirrus we get the info which card voltage
+		 * we have in EXTERN DATA and write it to MISC_CTL1
+		 */
+		powerstate = pd67_ext_get(s, PD67_EXTERN_DATA);
+		if (powerstate & PD67_EXD_VS1(0)) {
+			/* 5V Card */
+			i365_bclr (s, PD67_MISC_CTL_1, PD67_MC1_VCC_3V);
+		} else {
+			/* 3.3V Card */
+			i365_bset (s, PD67_MISC_CTL_1, PD67_MC1_VCC_3V);
+		}
+		i365_set (s, I365_POWER, (I365_PWR_OUT | I365_PWR_NORESET | I365_VCC_5V | I365_VPP1_5V));
+		power = i365_get (s, I365_POWER);
+	}
+	if (power & I365_VCC_5V) {
+		state.Vcc = (i365_get(s, PD67_MISC_CTL_1) & PD67_MC1_VCC_3V) ? 33 : 50;
+	}
+
+	if (power == I365_VPP1_12V)
+		state.Vpp = 120;
+
+	/* IO card, RESET flags, IO interrupt */
+	power = i365_get (s, I365_INTCTL);
+	state.flags |= (power & I365_PC_RESET) ? 0 : SS_RESET;
+	if (power & I365_PC_IOCARD)
+		state.flags |= SS_IOCARD;
+	state.io_irq = power & I365_IRQ_MASK;
+
+	/* Card status change mask */
+	power = i365_get (s, I365_CSCINT);
+	state.csc_mask = (power & I365_CSC_DETECT) ? SS_DETECT : 0;
+	if (state.flags & SS_IOCARD)
+		state.csc_mask |= (power & I365_CSC_STSCHG) ? SS_STSCHG : 0;
+	else {
+		state.csc_mask |= (power & I365_CSC_BVD1) ? SS_BATDEAD : 0;
+		state.csc_mask |= (power & I365_CSC_BVD2) ? SS_BATWARN : 0;
+		state.csc_mask |= (power & I365_CSC_READY) ? SS_READY : 0;
+	}
+	debug ("i82365: GetStatus(0) = flags %#3.3x, Vcc %d, Vpp %d, "
+		"io_irq %d, csc_mask %#2.2x\n", state.flags,
+		state.Vcc, state.Vpp, state.io_irq, state.csc_mask);
+
+	return 0;
+}	/* i365_get_status */
+
+static int i365_set_socket (socket_info_t * s, socket_state_t * state)
+{
+	u_char reg;
+
+	set_bridge_state (s);
+
+	/* IO card, RESET flag */
+	reg = 0;
+	reg |= (state->flags & SS_RESET) ? 0 : I365_PC_RESET;
+	reg |= (state->flags & SS_IOCARD) ? I365_PC_IOCARD : 0;
+	i365_set (s, I365_INTCTL, reg);
+
+	cb_set_power (s, state);
+
+#if 0
+	/* Card status change interrupt mask */
+	reg = s->cs_irq << 4;
+	if (state->csc_mask & SS_DETECT)
+		reg |= I365_CSC_DETECT;
+	if (state->flags & SS_IOCARD) {
+		if (state->csc_mask & SS_STSCHG)
+			reg |= I365_CSC_STSCHG;
+	} else {
+		if (state->csc_mask & SS_BATDEAD)
+			reg |= I365_CSC_BVD1;
+		if (state->csc_mask & SS_BATWARN)
+			reg |= I365_CSC_BVD2;
+		if (state->csc_mask & SS_READY)
+			reg |= I365_CSC_READY;
+	}
+	i365_set (s, I365_CSCINT, reg);
+	i365_get (s, I365_CSC);
+#endif	/* 0 */
+
+	return 0;
+}	/* i365_set_socket */
+
+/*====================================================================*/
+
+static int i365_set_mem_map (socket_info_t * s, struct pccard_mem_map *mem)
+{
+	u_short base, i;
+	u_char map;
+
+	debug ("i82365: SetMemMap(%d, %#2.2x, %d ns, %#5.5lx-%#5.5lx, %#5.5x)\n",
+		mem->map, mem->flags, mem->speed,
+		mem->sys_start, mem->sys_stop, mem->card_start);
+
+	map = mem->map;
+	if ((map > 4) ||
+	    (mem->card_start > 0x3ffffff) ||
+	    (mem->sys_start > mem->sys_stop) ||
+	    (mem->speed > 1000)) {
+		return -1;
+	}
+
+	/* Turn off the window before changing anything */
+	if (i365_get (s, I365_ADDRWIN) & I365_ENA_MEM (map))
+		i365_bclr (s, I365_ADDRWIN, I365_ENA_MEM (map));
+
+	/* Take care of high byte, for PCI controllers */
+	i365_set (s, CB_MEM_PAGE (map), mem->sys_start >> 24);
+
+	base = I365_MEM (map);
+	i = (mem->sys_start >> 12) & 0x0fff;
+	if (mem->flags & MAP_16BIT)
+		i |= I365_MEM_16BIT;
+	if (mem->flags & MAP_0WS)
+		i |= I365_MEM_0WS;
+	i365_set_pair (s, base + I365_W_START, i);
+
+	i = (mem->sys_stop >> 12) & 0x0fff;
+	switch (mem->speed / CYCLE_TIME) {
+	case 0:
+		break;
+	case 1:
+		i |= I365_MEM_WS0;
+		break;
+	case 2:
+		i |= I365_MEM_WS1;
+		break;
+	default:
+		i |= I365_MEM_WS1 | I365_MEM_WS0;
+		break;
+	}
+	i365_set_pair (s, base + I365_W_STOP, i);
+
+	i = 0;
+	if (mem->flags & MAP_WRPROT)
+		i |= I365_MEM_WRPROT;
+	if (mem->flags & MAP_ATTRIB)
+		i |= I365_MEM_REG;
+	i365_set_pair (s, base + I365_W_OFF, i);
+
+	/* set System Memory map Upper Adress */
+	i365_set(s, PD67_EXT_INDEX, PD67_MEM_PAGE(map));
+	i365_set(s, PD67_EXT_DATA, ((mem->sys_start >> 24) & 0xff));
+
+	/* Turn on the window if necessary */
+	if (mem->flags & MAP_ACTIVE)
+		i365_bset (s, I365_ADDRWIN, I365_ENA_MEM (map));
+	return 0;
+}	/* i365_set_mem_map */
+
+static int i365_set_io_map (socket_info_t * s, struct pccard_io_map *io)
+{
+	u_char map, ioctl;
+
+	map = io->map;
+	/* comment out: comparison is always false due to limited range of data type */
+	if ((map > 1) || /* (io->start > 0xffff) || (io->stop > 0xffff) || */
+	    (io->stop < io->start))
+		return -1;
+	/* Turn off the window before changing anything */
+	if (i365_get (s, I365_ADDRWIN) & I365_ENA_IO (map))
+		i365_bclr (s, I365_ADDRWIN, I365_ENA_IO (map));
+	i365_set_pair (s, I365_IO (map) + I365_W_START, io->start);
+	i365_set_pair (s, I365_IO (map) + I365_W_STOP, io->stop);
+	ioctl = i365_get (s, I365_IOCTL) & ~I365_IOCTL_MASK (map);
+	if (io->speed)
+		ioctl |= I365_IOCTL_WAIT (map);
+	if (io->flags & MAP_0WS)
+		ioctl |= I365_IOCTL_0WS (map);
+	if (io->flags & MAP_16BIT)
+		ioctl |= I365_IOCTL_16BIT (map);
+	if (io->flags & MAP_AUTOSZ)
+		ioctl |= I365_IOCTL_IOCS16 (map);
+	i365_set (s, I365_IOCTL, ioctl);
+	/* Turn on the window if necessary */
+	if (io->flags & MAP_ACTIVE)
+		i365_bset (s, I365_ADDRWIN, I365_ENA_IO (map));
+	return 0;
+}	/* i365_set_io_map */
+
+/*====================================================================*/
+
+/*
+ * PCI_ADDR = (HOST_ADDR - 0xfe000000)
+ * see MPC 8245 Users Manual Adress Map B
+ */
+#define	HOST_TO_PCI(addr)	((addr) - 0xfe000000)
+#define	PCI_TO_HOST(addr)	((addr) + 0xfe000000)
+
+int i82365_init (void)
+{
+	u_int val;
+	int i;
+
+	if ((socket.dev = pci_find_devices (supported, 0)) < 0) {
+		/* Controller not found */
+		printf ("No PD67290 device found !!\n");
+		return 1;
+	}
+	debug ("i82365 Device Found!\n");
+
+	socket.cb_phys = PCMCIA_IO_BASE;
 
 	/* set base address */
-	pci_write_config_dword (devno, PCI_BASE_ADDRESS_0, membaseCsr);
+	pci_write_config_dword (socket.dev, PCI_BASE_ADDRESS_0,
+		HOST_TO_PCI(socket.cb_phys));
 
 	/* enable mapped memory and IO addresses */
-	pci_write_config_dword (devno,
+	pci_write_config_dword (socket.dev,
 				PCI_COMMAND,
 				PCI_COMMAND_MEMORY |
 				PCI_COMMAND_IO | PCI_COMMAND_WAIT);
+
+	get_bridge_state (&socket);
+	set_bridge_opts (&socket);
+
+	i = i365_get_status (&socket, &val);
+
+	if (i > -1) {
+		puts (pcic[socket.type].name);
+	} else {
+		printf ("i82365: Controller not found.\n");
+		return 1;
+	}
+	if((val & SS_DETECT) != SS_DETECT){
+		puts ("No card\n");
+		return 1;
+	}
+
+	state.flags |= SS_OUTPUT_ENA;
+
+	i365_set_socket (&socket, &state);
+
+	for (i = 500; i; i--) {
+		if ((i365_get (&socket, I365_STATUS) & I365_CS_READY))
+			break;
+		udelay (1000);
+	}
+
+	if (i == 0) {
+		/* PC Card not ready for data transfer */
+		puts ("i82365 PC Card not ready for data transfer\n");
+		return 1;
+	}
+	debug (" PC Card ready for data transfer: ");
+
+	mem.map = 0;
+	mem.flags = MAP_ATTRIB | MAP_ACTIVE;
+	mem.speed = 300;
+	mem.sys_start = CFG_PCMCIA_MEM_ADDR;
+	mem.sys_stop = CFG_PCMCIA_MEM_ADDR + CFG_PCMCIA_MEM_SIZE - 1;
+	mem.card_start = 0;
+	i365_set_mem_map (&socket, &mem);
+
+	mem.map = 1;
+	mem.flags = MAP_ACTIVE;
+	mem.speed = 300;
+	mem.sys_start = CFG_PCMCIA_MEM_ADDR + CFG_PCMCIA_MEM_SIZE;
+	mem.sys_stop = CFG_PCMCIA_MEM_ADDR + (2 * CFG_PCMCIA_MEM_SIZE) - 1;
+	mem.card_start = 0;
+	i365_set_mem_map (&socket, &mem);
+
+#ifdef DEBUG
+	i82365_dump_regions (socket.dev);
+#endif
+
 	return 0;
 }
+
+void i82365_exit (void)
+{
+	io.map = 0;
+	io.flags = 0;
+	io.speed = 0;
+	io.start = 0;
+	io.stop = 0x1;
+
+	i365_set_io_map (&socket, &io);
+
+	mem.map = 0;
+	mem.flags = 0;
+	mem.speed = 0;
+	mem.sys_start = 0;
+	mem.sys_stop = 0x1000;
+	mem.card_start = 0;
+
+	i365_set_mem_map (&socket, &mem);
+
+	mem.map = 1;
+	mem.flags = 0;
+	mem.speed = 0;
+	mem.sys_start = 0;
+	mem.sys_stop = 0x1000;
+	mem.card_start = 0;
+
+	i365_set_mem_map (&socket, &mem);
+
+	state.Vcc = state.Vpp = 0;
+
+	i365_set_socket (&socket, &state);
+}
+
+int pcmcia_on (void)
+{
+	u_int rc;
+
+	debug ("Enable PCMCIA " PCMCIA_SLOT_MSG "\n");
+
+	rc = i82365_init();
+	if (rc)
+		goto exit;
+
+	rc = check_ide_device(0);
+	if (rc == 0)
+		goto exit;
+
+	i82365_exit();
+
+exit:
+	return rc;
+}
+
+#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+int pcmcia_off (void)
+{
+	printf ("Disable PCMCIA " PCMCIA_SLOT_MSG "\n");
+
+	i82365_exit();
+
+	return 0;
+}
+#endif
+
+/*======================================================================
+
+    Debug stuff
+
+======================================================================*/
+
+#ifdef DEBUG
+static void i82365_dump_regions (pci_dev_t dev)
+{
+	u_int tmp[2];
+	u_int *mem = (void *) socket.cb_phys;
+	u_char *cis = (void *) CFG_PCMCIA_MEM_ADDR;
+	u_char *ide = (void *) (CFG_ATA_BASE_ADDR + CFG_ATA_REG_OFFSET);
+
+	pci_read_config_dword (dev, 0x00, tmp + 0);
+	pci_read_config_dword (dev, 0x80, tmp + 1);
+
+	printf ("PCI CONF: %08X ... %08X\n",
+		tmp[0], tmp[1]);
+	printf ("PCI MEM:  ... %08X ... %08X\n",
+		mem[0x8 / 4], mem[0x800 / 4]);
+	printf ("CIS:      ...%c%c%c%c%c%c%c%c...\n",
+		cis[0x38], cis[0x3a], cis[0x3c], cis[0x3e],
+		cis[0x40], cis[0x42], cis[0x44], cis[0x48]);
+	printf ("CIS CONF: %02X %02X %02X ...\n",
+		cis[0x200], cis[0x202], cis[0x204]);
+	printf ("IDE:      %02X %02X %02X %02X %02X %02X %02X %02X\n",
+		ide[0], ide[1], ide[2], ide[3],
+		ide[4], ide[5], ide[6], ide[7]);
+}
+#endif	/* DEBUG */
+
+#endif /* CONFIG_I82365 */
diff --git a/board/cpu87/cpu87.c b/board/cpu87/cpu87.c
index 8363d868fc..e8c2614eb4 100644
--- a/board/cpu87/cpu87.c
+++ b/board/cpu87/cpu87.c
@@ -197,7 +197,7 @@ const iop_conf_t iop_conf_tab[4][32] = {
  */
 int checkboard (void)
 {
-	printf ("Board: CPU87 (Rev %02x)\n", CPU86_REV);
+	printf ("Board: CPU87 (Rev %02x)\n", CPU86_REV & 0x7f);
 	return 0;
 }
 
@@ -280,7 +280,7 @@ long int initdram (int board_type)
 	volatile memctl8260_t *memctl = &immap->im_memctl;
 
 #ifndef CFG_RAMBOOT
-	ulong size8, size9;
+	ulong size8, size9, size10;
 #endif
 	long psize;
 
@@ -294,17 +294,25 @@ long int initdram (int board_type)
 	 */
 	size8 = try_init (memctl, CFG_PSDMR_8COL, CFG_OR2_8COL,
 			  (uchar *) CFG_SDRAM_BASE);
+	
 	size9 = try_init (memctl, CFG_PSDMR_9COL, CFG_OR2_9COL,
 			  (uchar *) CFG_SDRAM_BASE);
-
-	if (size8 < size9) {
-		psize = size9;
-		printf ("(60x:9COL) ");
-	} else {
+	
+	size10 = try_init (memctl, CFG_PSDMR_10COL, CFG_OR2_10COL,
+			  (uchar *) CFG_SDRAM_BASE);
+	
+	psize = max(size8,max(size9,size10));
+	
+	if (psize == size8) {
 		psize = try_init (memctl, CFG_PSDMR_8COL, CFG_OR2_8COL,
 				  (uchar *) CFG_SDRAM_BASE);
 		printf ("(60x:8COL) ");
-	}
+	} else if (psize == size9){
+		psize = try_init (memctl, CFG_PSDMR_9COL, CFG_OR2_9COL,
+				  (uchar *) CFG_SDRAM_BASE);
+		printf ("(60x:9COL) ");
+	} else
+		printf ("(60x:10COL) ");
 
 #endif	/* CFG_RAMBOOT */
 
diff --git a/board/etin/kvme080/Makefile b/board/etin/kvme080/Makefile
new file mode 100644
index 0000000000..303ccfaf34
--- /dev/null
+++ b/board/etin/kvme080/Makefile
@@ -0,0 +1,40 @@
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS =  $(BOARD).o multiverse.o
+
+$(LIB):	.depend $(OBJS)
+	$(AR) crv $@ $(OBJS)
+
+#########################################################################
+
+.depend:	Makefile $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/board/etin/kvme080/config.mk b/board/etin/kvme080/config.mk
new file mode 100644
index 0000000000..45abdc0e83
--- /dev/null
+++ b/board/etin/kvme080/config.mk
@@ -0,0 +1,30 @@
+#
+# (C) Copyright 2005
+# Sangmoon, Etin Systems, dogoil@etinsys.com.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# KVME080 board
+#
+
+TEXT_BASE = 0xFFF00000
+
+PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE)
diff --git a/board/etin/kvme080/kvme080.c b/board/etin/kvme080/kvme080.c
new file mode 100644
index 0000000000..de62fa0973
--- /dev/null
+++ b/board/etin/kvme080/kvme080.c
@@ -0,0 +1,193 @@
+/*
+ * (C) Copyright 2005
+ * Sangmoon Kim, Etin Systems. dogoil@etinsys.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc824x.h>
+#include <pci.h>
+#include <i2c.h>
+#include <asm/processor.h>
+
+int checkboard(void)
+{
+	puts ("Board: KVME080\n");
+	return 0;
+}
+
+unsigned long setdram(int m, int row, int col, int bank)
+{
+	int i;
+	unsigned long start, end;
+	uint32_t mccr1;
+	uint32_t mear1 = 0, emear1 = 0, msar1 = 0, emsar1 = 0;
+	uint32_t mear2 = 0, emear2 = 0, msar2 = 0, emsar2 = 0;
+	uint8_t mber = 0;
+
+	CONFIG_READ_WORD(MCCR1, mccr1);
+	mccr1 &= 0xffff0000;
+
+	start = CFG_SDRAM_BASE;
+	end = start + (1 << (col + row + 3) ) * bank - 1;
+
+	for (i = 0; i < m; i++) {
+		mccr1 |= ((row == 13)? 2 : (bank == 4)? 0 : 3) << i * 2;
+		if (i < 4) {
+			msar1  |= ((start >> 20) & 0xff) << i * 8;
+			emsar1 |= ((start >> 28) & 0xff) << i * 8;
+			mear1  |= ((end >> 20) & 0xff) << i * 8;
+			emear1 |= ((end >> 28) & 0xff) << i * 8;
+		} else {
+			msar2  |= ((start >> 20) & 0xff) << (i-4) * 8;
+			emsar2 |= ((start >> 28) & 0xff) << (i-4) * 8;
+			mear2  |= ((end >> 20) & 0xff) << (i-4) * 8;
+			emear2 |= ((end >> 28) & 0xff) << (i-4) * 8;
+		}
+		mber |= 1 << i;
+		start += (1 << (col + row + 3) ) * bank;
+		end += (1 << (col + row + 3) ) * bank;
+	}
+	for (; i < 8; i++) {
+		if (i < 4) {
+			msar1  |= 0xff << i * 8;
+			emsar1 |= 0x30 << i * 8;
+			mear1  |= 0xff << i * 8;
+			emear1 |= 0x30 << i * 8;
+		} else {
+			msar2  |= 0xff << (i-4) * 8;
+			emsar2 |= 0x30 << (i-4) * 8;
+			mear2  |= 0xff << (i-4) * 8;
+			emear2 |= 0x30 << (i-4) * 8;
+		}
+	}
+
+	CONFIG_WRITE_WORD(MCCR1, mccr1);
+	CONFIG_WRITE_WORD(MSAR1, msar1);
+	CONFIG_WRITE_WORD(EMSAR1, emsar1);
+	CONFIG_WRITE_WORD(MEAR1, mear1);
+	CONFIG_WRITE_WORD(EMEAR1, emear1);
+	CONFIG_WRITE_WORD(MSAR2, msar2);
+	CONFIG_WRITE_WORD(EMSAR2, emsar2);
+	CONFIG_WRITE_WORD(MEAR2, mear2);
+	CONFIG_WRITE_WORD(EMEAR2, emear2);
+	CONFIG_WRITE_BYTE(MBER, mber);
+
+	return (1 << (col + row + 3) ) * bank * m;
+}
+
+long int initdram(int board_type)
+{
+	unsigned int msr;
+	long int size = 0;
+
+	msr = mfmsr();
+	mtmsr(msr & ~(MSR_IR | MSR_DR));
+	mtspr(IBAT2L, CFG_IBAT0L + 0x10000000);
+	mtspr(IBAT2U, CFG_IBAT0U + 0x10000000);
+	mtspr(DBAT2L, CFG_DBAT0L + 0x10000000);
+	mtspr(DBAT2U, CFG_DBAT0U + 0x10000000);
+	mtmsr(msr);
+
+	if (setdram(2,13,10,4) == get_ram_size(CFG_SDRAM_BASE, 0x20000000))
+		size = 0x20000000;	/* 512MB */
+	else if (setdram(1,13,10,4) == get_ram_size(CFG_SDRAM_BASE, 0x10000000))
+		size = 0x10000000;	/* 256MB */
+	else if (setdram(2,13,9,4) == get_ram_size(CFG_SDRAM_BASE, 0x10000000))
+		size = 0x10000000;	/* 256MB */
+	else if (setdram(1,13,9,4) == get_ram_size(CFG_SDRAM_BASE, 0x08000000))
+		size = 0x08000000;	/* 128MB */
+	else if (setdram(2,12,9,4) == get_ram_size(CFG_SDRAM_BASE, 0x08000000))
+		size = 0x08000000;	/* 128MB */
+	else if (setdram(1,12,9,4) == get_ram_size(CFG_SDRAM_BASE, 0x04000000))
+		size = 0x04000000;	/* 64MB */
+
+	msr = mfmsr();
+	mtmsr(msr & ~(MSR_IR | MSR_DR));
+	mtspr(IBAT2L, CFG_IBAT2L);
+	mtspr(IBAT2U, CFG_IBAT2U);
+	mtspr(DBAT2L, CFG_DBAT2L);
+	mtspr(DBAT2U, CFG_DBAT2U);
+	mtmsr(msr);
+
+	return size;
+}
+
+struct pci_controller hose;
+
+void pci_init_board(void)
+{
+	pci_mpc824x_init(&hose);
+}
+
+int board_early_init_f(void)
+{
+	*(volatile unsigned char *)(0xff080120) = 0xfb;
+
+	return 0;
+}
+
+int board_early_init_r(void)
+{
+	unsigned int msr;
+
+	CONFIG_WRITE_WORD(ERCR1, 0x95ff8000);
+	CONFIG_WRITE_WORD(ERCR3, 0x0c00000e);
+	CONFIG_WRITE_WORD(ERCR4, 0x0800000e);
+
+	msr = mfmsr();
+	mtmsr(msr & ~(MSR_IR | MSR_DR));
+	mtspr(IBAT1L, 0x70000000 | BATL_PP_10 | BATL_CACHEINHIBIT);
+	mtspr(IBAT1U, 0x70000000 | BATU_BL_256M | BATU_VS | BATU_VP);
+	mtspr(DBAT1L, 0x70000000 | BATL_PP_10 | BATL_CACHEINHIBIT);
+	mtspr(DBAT1U, 0x70000000 | BATU_BL_256M | BATU_VS | BATU_VP);
+	mtmsr(msr);
+
+	return 0;
+}
+
+extern int multiverse_init(void);
+
+int misc_init_r(void)
+{
+	multiverse_init();
+	return 0;
+}
+
+void *nvram_read(void *dest, const long src, size_t count)
+{
+	volatile uchar *d = (volatile uchar*) dest;
+	volatile uchar *s = (volatile uchar*) src;
+	while(count--) {
+		*d++ = *s++;
+		asm volatile("sync");
+	}
+	return dest;
+}
+
+void nvram_write(long dest, const void *src, size_t count)
+{
+	volatile uchar *d = (volatile uchar*)dest;
+	volatile uchar *s = (volatile uchar*)src;
+	while(count--) {
+		*d++ = *s++;
+		asm volatile("sync");
+	}
+}
diff --git a/board/etin/kvme080/multiverse.c b/board/etin/kvme080/multiverse.c
new file mode 100644
index 0000000000..eb895817d5
--- /dev/null
+++ b/board/etin/kvme080/multiverse.c
@@ -0,0 +1,186 @@
+/*
+ * multiverse.c
+ *
+ * VME driver for Multiverse
+ *
+ * Author : Sangmoon Kim
+ *	    dogoil@etinsys.com
+ *
+ * Copyright 2005 ETIN SYSTEMS Co.,Ltd.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <pci.h>
+
+#include "multiverse.h"
+
+static unsigned long vme_asi_addr;
+static unsigned long vme_iack_addr;
+static unsigned long pci_reg_addr;
+static unsigned long vme_reg_addr;
+
+int multiv_reset(unsigned long base)
+{
+	writeb(0x09, base + VME_SLAVE32_AM);
+	writeb(0x39, base + VME_SLAVE24_AM);
+	writeb(0x29, base + VME_SLAVE16_AM);
+	writeb(0x2f, base + VME_SLAVE_REG_AM);
+	writeb((VME_A32_SLV_BUS >> 24) & 0xff, base + VME_SLAVE32_A);
+	writeb((VME_A24_SLV_BUS >> 16) & 0xff, base + VME_SLAVE24_A);
+	writeb((VME_A16_SLV_BUS >> 8 ) & 0xff, base + VME_SLAVE16_A);
+#ifdef A32_SLV_WINDOW
+	if (readb(base + VME_STATUS) & VME_STATUS_SYSCON) {
+		writeb(((~(VME_A32_SLV_SIZE-1)) >> 24) & 0xff,
+				base + VME_SLAVE32_MASK);
+		writeb(0x01, base + VME_SLAVE32_EN);
+	} else {
+		writeb(0xff, base + VME_SLAVE32_MASK);
+		writeb(0x00, base + VME_SLAVE32_EN);
+	}
+#else
+	writeb(0xff, base + VME_SLAVE32_MASK);
+	writeb(0x00, base + VME_SLAVE32_EN);
+#endif
+#ifdef A24_SLV_WINDOW
+	if (readb(base + VME_STATUS) & VME_STATUS_SYSCON) {
+		writeb(((~(VME_A24_SLV_SIZE-1)) >> 16) & 0xff,
+				base + VME_SLAVE24_MASK);
+		writeb(0x01, base + VME_SLAVE24_EN);
+	} else {
+		writeb(0xff, base + VME_SLAVE24_MASK);
+		writeb(0x00, base + VME_SLAVE24_EN);
+	}
+#else
+	writeb(0xff, base + VME_SLAVE24_MASK);
+	writeb(0x00, base + VME_SLAVE24_EN);
+#endif
+#ifdef A16_SLV_WINDOW
+	if (readb(base + VME_STATUS) & VME_STATUS_SYSCON) {
+		writeb(((~(VME_A16_SLV_SIZE-1)) >> 8) & 0xff,
+				base + VME_SLAVE16_MASK);
+		writeb(0x01, base + VME_SLAVE16_EN);
+	} else {
+		writeb(0xff, base + VME_SLAVE16_MASK);
+		writeb(0x00, base + VME_SLAVE16_EN);
+	}
+#else
+	writeb(0xff, base + VME_SLAVE16_MASK);
+	writeb(0x00, base + VME_SLAVE16_EN);
+#endif
+#ifdef REG_SLV_WINDOW
+	if (readb(base + VME_STATUS) & VME_STATUS_SYSCON) {
+		writeb(((~(VME_REG_SLV_SIZE-1)) >> 16) & 0xff,
+				base + VME_SLAVE_REG_MASK);
+		writeb(0x01, base + VME_SLAVE_REG_EN);
+	} else {
+		writeb(0xf8, base + VME_SLAVE_REG_MASK);
+	}
+#else
+	writeb(0xf8, base + VME_SLAVE_REG_MASK);
+#endif
+	writeb(0x09, base + VME_MASTER32_AM);
+	writeb(0x39, base + VME_MASTER24_AM);
+	writeb(0x29, base + VME_MASTER16_AM);
+	writeb(0x2f, base + VME_MASTER_REG_AM);
+	writel(0x00000000, base + VME_RMW_ADRS);
+	writeb(0x00, base + VME_IRQ);
+	writeb(0x00, base + VME_INT_EN);
+	writel(0x00000000, base + VME_IRQ1_REG);
+	writel(0x00000000, base + VME_IRQ2_REG);
+	writel(0x00000000, base + VME_IRQ3_REG);
+	writel(0x00000000, base + VME_IRQ4_REG);
+	writel(0x00000000, base + VME_IRQ5_REG);
+	writel(0x00000000, base + VME_IRQ6_REG);
+	writel(0x00000000, base + VME_IRQ7_REG);
+	return 0;
+}
+
+void multiv_auto_slot_id(unsigned long base)
+{
+	unsigned int vector;
+	int slot_id = 1;
+	if (readb(base + VME_CTRL) & VME_CTRL_SYSFAIL) {
+		*(volatile unsigned int*)(base + VME_IRQ2_REG) = 0xfe;
+		writeb(readb(base + VME_IRQ) | 0x04, base + VME_IRQ);
+		writeb(readb(base + VME_CTRL) & ~VME_CTRL_SYSFAIL,
+				base + VME_CTRL);
+		while (readb(base + VME_STATUS) & VME_STATUS_SYSFAIL);
+		if (readb(base + VME_STATUS) & VME_STATUS_SYSCON) {
+			while (readb(base + VME_INT) & 0x04) {
+				vector = *(volatile unsigned int*)
+					(vme_iack_addr + VME_IACK2);
+				*(unsigned char*)(vme_asi_addr + 0x7ffff)
+					= (slot_id << 3) & 0xff;
+				slot_id ++;
+				if (slot_id > 31)
+					break;
+			}
+		}
+	}
+}
+
+int multiverse_init(void)
+{
+	int i;
+	pci_dev_t pdev;
+	unsigned int bar[6];
+
+	pdev = pci_find_device(0x1895, 0x0001, 0);
+
+	if (pdev == 0)
+		return -1;
+
+	for (i = 0; i < 6; i++)
+		pci_read_config_dword (pdev,
+				PCI_BASE_ADDRESS_0 + i * 4, &bar[i]);
+
+	pci_reg_addr = bar[0];
+	vme_reg_addr = bar[1] + 0x00F00000;
+	vme_iack_addr = bar[1] + 0x00200000;
+	vme_asi_addr = bar[3];
+
+	pci_write_config_dword (pdev, PCI_COMMAND,
+		PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+
+	writel(0xFF000000, pci_reg_addr + P_TA1);
+	writel(0x04, pci_reg_addr + P_IMG_CTRL1);
+	writel(0xf0000000, pci_reg_addr + P_TA2);
+	writel(0x04, pci_reg_addr + P_IMG_CTRL2);
+	writel(0xF1000000, pci_reg_addr + P_TA3);
+	writel(0x04, pci_reg_addr + P_IMG_CTRL3);
+	writel(VME_A32_MSTR_BUS, pci_reg_addr + P_TA5);
+	writel(~(VME_A32_MSTR_SIZE-1), pci_reg_addr + P_AM5);
+	writel(0x04, pci_reg_addr + P_IMG_CTRL5);
+
+	writel(VME_A32_SLV_BUS, pci_reg_addr + W_BA1);
+	writel(~(VME_A32_SLV_SIZE-1), pci_reg_addr + W_AM1);
+	writel(VME_A32_SLV_LOCAL, pci_reg_addr + W_TA1);
+	writel(0x04, pci_reg_addr + W_IMG_CTRL1);
+
+	writel(0xF0000000, pci_reg_addr + W_BA2);
+	writel(0xFF000000, pci_reg_addr + W_AM2);
+	writel(VME_A24_SLV_LOCAL, pci_reg_addr + W_TA2);
+	writel(0x04, pci_reg_addr + W_IMG_CTRL2);
+
+	writel(0xFF000000, pci_reg_addr + W_BA3);
+	writel(0xFF000000, pci_reg_addr + W_AM3);
+	writel(VME_A16_SLV_LOCAL, pci_reg_addr + W_TA3);
+	writel(0x04, pci_reg_addr + W_IMG_CTRL3);
+
+	writel(0x00000001, pci_reg_addr + W_ERR_CS);
+	writel(0x00000001, pci_reg_addr + P_ERR_CS);
+
+	multiv_reset(vme_reg_addr);
+	writeb(readb(vme_reg_addr + VME_CTRL) | VME_CTRL_SHORT_D,
+		vme_reg_addr + VME_CTRL);
+
+	multiv_auto_slot_id(vme_reg_addr);
+
+	return 0;
+}
diff --git a/board/etin/kvme080/multiverse.h b/board/etin/kvme080/multiverse.h
new file mode 100644
index 0000000000..776162d446
--- /dev/null
+++ b/board/etin/kvme080/multiverse.h
@@ -0,0 +1,176 @@
+/*
+ * multiverse.h
+ *
+ * VME driver for Multiverse
+ *
+ * Author : Sangmoon Kim
+ *	    dogoil@etinsys.com
+ *
+ * Copyright 2005 ETIN SYSTEMS Co.,Ltd.
+ *
+ * This program is free software; you can redistribute	it and/or modify it
+ * under  the terms of	the GNU General Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __MULTIVERSE_H__
+#define __MULTIVERSE_H__
+
+#define VME_A32_MSTR_BUS	0x90000000
+#define VME_A32_MSTR_SIZE	0x01000000
+
+#define VME_A32_SLV_SIZE	0x01000000
+
+#define VME_A32_SLV_BUS		0x90000000
+#define VME_A24_SLV_BUS		0x00000000
+#define VME_A16_SLV_BUS		0x00000000
+
+#define VME_A32_SLV_LOCAL	0x00000000
+#define VME_A24_SLV_LOCAL	0x00000000
+#define VME_A16_SLV_LOCAL	0x00000000
+
+#define A32_SLV_WINDOW
+#undef	A24_SLV_WINDOW
+#undef	A16_SLV_WINDOW
+#undef	REG_SLV_WINDOW
+
+/* PCI Registers */
+
+#define P_IMG_CTRL0		0x100
+#define P_BA0			0x104
+#define P_AM0			0x108
+#define P_TA0			0x10C
+#define P_IMG_CTRL1		0x110
+#define P_BA1			0x114
+#define P_AM1			0x118
+#define P_TA1			0x11C
+#define P_IMG_CTRL2		0x120
+#define P_BA2			0x124
+#define P_AM2			0x128
+#define P_TA2			0x12C
+#define P_IMG_CTRL3		0x130
+#define P_BA3			0x134
+#define P_AM3			0x138
+#define P_TA3			0x13C
+#define P_IMG_CTRL4		0x140
+#define P_BA4			0x144
+#define P_AM4			0x148
+#define P_TA4			0x14C
+#define P_IMG_CTRL5		0x150
+#define P_BA5			0x154
+#define P_AM5			0x158
+#define P_TA5			0x15C
+#define P_ERR_CS		0x160
+#define P_ERR_ADDR		0x164
+#define P_ERR_DATA		0x168
+
+#define WB_CONF_SPC_BAR		0x180
+#define W_IMG_CTRL1		0x184
+#define W_BA1			0x188
+#define W_AM1			0x18C
+#define W_TA1			0x190
+#define W_IMG_CTRL2		0x194
+#define W_BA2			0x198
+#define W_AM2			0x19C
+#define W_TA2			0x1A0
+#define W_IMG_CTRL3		0x1A4
+#define W_BA3			0x1A8
+#define W_AM3			0x1AC
+#define W_TA3			0x1B0
+#define W_IMG_CTRL4		0x1B4
+#define W_BA4			0x1B8
+#define W_AM4			0x1BC
+#define W_TA4			0x1C0
+#define W_IMG_CTRL5		0x1C4
+#define W_BA5			0x1C8
+#define W_AM5			0x1CC
+#define W_TA5			0x1D0
+#define W_ERR_CS		0x1D4
+#define W_ERR_ADDR		0x1D8
+#define W_ERR_DATA		0x1DC
+#define CNF_ADDR		0x1E0
+#define CNF_DATA		0x1E4
+#define INT_ACK			0x1E8
+#define ICR			0x1EC
+#define ISR			0x1F0
+
+/* VME registers */
+
+#define VME_SLAVE32_AM		0x03
+#define VME_SLAVE24_AM		0x02
+#define VME_SLAVE16_AM		0x01
+#define VME_SLAVE_REG_AM	0x00
+#define VME_SLAVE32_A		0x07
+#define VME_SLAVE24_A		0x06
+#define VME_SLAVE16_A		0x05
+#define VME_SLAVE_REG_A		0x04
+#define VME_SLAVE32_MASK	0x0B
+#define VME_SLAVE24_MASK	0x0A
+#define VME_SLAVE16_MASK	0x09
+#define VME_SLAVE_REG_MASK	0x08
+#define VME_SLAVE32_EN		0x0F
+#define VME_SLAVE24_EN		0x0E
+#define VME_SLAVE16_EN		0x0D
+#define VME_SLAVE_REG_EN	0x0C
+#define VME_MASTER32_AM		0x13
+#define VME_MASTER24_AM		0x12
+#define VME_MASTER16_AM		0x11
+#define VME_MASTER_REG_AM	0x10
+#define VME_RMW_ADRS		0x14
+#define VME_MBOX		0x18
+#define VME_STATUS		0x1E
+#define VME_CTRL		0x1C
+#define VME_IRQ			0x20
+#define VME_INT_EN		0x21
+#define VME_INT			0x22
+#define VME_IRQ1_REG		0x24
+#define VME_IRQ2_REG		0x28
+#define VME_IRQ3_REG		0x2C
+#define VME_IRQ4_REG		0x30
+#define VME_IRQ5_REG		0x34
+#define VME_IRQ6_REG		0x38
+#define VME_IRQ7_REG		0x3C
+
+/* VME control register */
+
+#define VME_CTRL_BRDRST		0x01
+#define VME_CTRL_SYSRST		0x02
+#define VME_CTRL_RMW		0x04
+#define VME_CTRL_SHORT_D	0x08
+#define VME_CTRL_SYSFAIL	0x10
+#define VME_CTRL_VOWN		0x20
+#define VME_CTRL_A16_REG_MODE	0x40
+
+/* VME status register */
+
+#define VME_STATUS_SYSCON	0x01
+#define VME_STATUS_SYSFAIL	0x02
+#define VME_STATUS_ACFAIL	0x04
+#define VME_STATUS_SYSRST	0x08
+#define VME_STATUS_VOWN		0x10
+
+/* Interrupt types */
+
+#define LVL1			0x0002
+#define LVL2			0x0004
+#define LVL3			0x0008
+#define LVL4			0x0010
+#define LVL5			0x0020
+#define LVL6			0x0040
+#define LVL7			0x0080
+#define MULTIVERSE_INTI_INT	0x0100
+#define MULTIVERSE_WB_INT	0x0200
+#define MULTIVERSE_PCI_INT	0x0400
+
+/* interrupt acknowledge */
+
+#define VME_IACK1		0x04
+#define VME_IACK2		0x08
+#define VME_IACK3		0x0c
+#define VME_IACK4		0x10
+#define VME_IACK5		0x14
+#define VME_IACK6		0x18
+#define VME_IACK7		0x1c
+
+#endif /* __MULTIVERSE_H__ */
diff --git a/board/etin/kvme080/u-boot.lds b/board/etin/kvme080/u-boot.lds
new file mode 100644
index 0000000000..dda3687635
--- /dev/null
+++ b/board/etin/kvme080/u-boot.lds
@@ -0,0 +1,128 @@
+/*
+ * (C) Copyright 2001-2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)	}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)	}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)	}
+  .rela.got      : { *(.rela.got)	}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)	}
+  .rela.bss      : { *(.rela.bss)	}
+  .rel.plt       : { *(.rel.plt)	}
+  .rela.plt      : { *(.rela.plt)	}
+  .init          : { *(.init)		}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    cpu/mpc824x/start.o	(.text)
+    lib_ppc/board.o	(.text)
+    lib_ppc/ppcstring.o	(.text)
+
+	. = DEFINED(env_offset) ? env_offset : .;
+    common/environment.o (.text)
+
+	*(.text)
+
+    *(.fixup)
+    *(.got1)
+    . = ALIGN(16);
+    *(.rodata)
+    *(.rodata1)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x0FFF) & 0xFFFFF000;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(4096);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(4096);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+
+  _end = . ;
+  PROVIDE (end = .);
+}
diff --git a/board/fads/Makefile b/board/fads/Makefile
index baa6c2e40b..7fc88ee824 100644
--- a/board/fads/Makefile
+++ b/board/fads/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= lib$(BOARD).a
 
-OBJS	= $(BOARD).o flash.o lamp.o
+OBJS	= $(BOARD).o flash.o lamp.o pcmcia.o
 
 $(LIB):	.depend $(OBJS)
 	$(AR) crv $@ $(OBJS)
diff --git a/board/fads/fads.h b/board/fads/fads.h
index e981be03b5..41f18b5cf5 100644
--- a/board/fads/fads.h
+++ b/board/fads/fads.h
@@ -467,7 +467,9 @@
 #define CONFIG_ISO_PARTITION	1
 
 #undef	CONFIG_ATAPI
+#if 0	/* does not make sense when CFG_CMD_IDE is not enabled, too */
 #define CONFIG_IDE_8xx_PCCARD	1	/* Use IDE with PC Card Adapter */
+#endif
 #undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE	 not supported	*/
 #undef	CONFIG_IDE_LED			/* LED	 for ide not supported	*/
 #undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
diff --git a/board/fads/pcmcia.c b/board/fads/pcmcia.c
new file mode 100644
index 0000000000..978c16b941
--- /dev/null
+++ b/board/fads/pcmcia.c
@@ -0,0 +1,84 @@
+#include <common.h>
+#include <mpc8xx.h>
+#include <pcmcia.h>
+
+#undef	CONFIG_PCMCIA
+
+#if	(CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+#define	CONFIG_PCMCIA
+#endif
+
+#if	(CONFIG_COMMANDS & CFG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD)
+#define	CONFIG_PCMCIA
+#endif
+
+#ifdef	CONFIG_PCMCIA
+
+#ifdef	CONFIG_ADS
+#define	PCMCIA_BOARD_MSG "ADS"
+#else
+#define	PCMCIA_BOARD_MSG "FADS"
+#endif
+
+int pcmcia_voltage_set(int slot, int vcc, int vpp)
+{
+	u_long reg = 0;
+
+	switch(vpp) {
+		case 0: reg = 0; break;
+		case 50: reg = 1; break;
+		case 120: reg = 2; break;
+		default: return 1;
+	}
+
+	switch(vcc) {
+		case 0: reg = 0; break;
+#ifdef CONFIG_ADS
+	case 50: reg = BCSR1_PCCVCCON; break;
+#endif
+#ifdef CONFIG_FADS
+	case 33: reg = BCSR1_PCCVCC0 | BCSR1_PCCVCC1; break;
+	case 50: reg = BCSR1_PCCVCC1; break;
+#endif
+	default: return 1;
+	}
+
+	/* first, turn off all power */
+
+#ifdef CONFIG_ADS
+	*((uint *)BCSR1) |= BCSR1_PCCVCCON;
+#endif
+#ifdef CONFIG_FADS
+	*((uint *)BCSR1) &= ~(BCSR1_PCCVCC0 | BCSR1_PCCVCC1);
+#endif
+	*((uint *)BCSR1) &= ~BCSR1_PCCVPP_MASK;
+
+	/* enable new powersettings */
+
+#ifdef CONFIG_ADS
+	*((uint *)BCSR1) &= ~reg;
+#endif
+#ifdef CONFIG_FADS
+	*((uint *)BCSR1) |= reg;
+#endif
+
+ 	*((uint *)BCSR1) |= reg << 20;
+
+	return 0;
+}
+
+int pcmcia_hardware_enable(int slot)
+{
+	*((uint *)BCSR1) &= ~BCSR1_PCCEN;
+	return 0;
+}
+
+#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+int pcmcia_hardware_disable(int slot)
+{
+	*((uint *)BCSR1) &= ~BCSR1_PCCEN;
+	return 0;
+}
+#endif	/* CFG_CMD_PCMCIA */
+
+#endif	/* CONFIG_PCMCIA */
diff --git a/board/gth/Makefile b/board/gth/Makefile
index e14c12e4aa..48f74cd94d 100644
--- a/board/gth/Makefile
+++ b/board/gth/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= lib$(BOARD).a
 
-OBJS	= $(BOARD).o flash.o ee_access.o
+OBJS	= $(BOARD).o flash.o ee_access.o pcmcia.o
 
 $(LIB):	.depend $(OBJS)
 	$(AR) crv $@ $(OBJS)
diff --git a/board/gth/pcmcia.c b/board/gth/pcmcia.c
new file mode 100644
index 0000000000..fce5492635
--- /dev/null
+++ b/board/gth/pcmcia.c
@@ -0,0 +1,93 @@
+#include <common.h>
+#include <mpc8xx.h>
+#include <pcmcia.h>
+
+#undef	CONFIG_PCMCIA
+
+#if	(CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+#define	CONFIG_PCMCIA
+#endif
+
+#if	(CONFIG_COMMANDS & CFG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD)
+#define	CONFIG_PCMCIA
+#endif
+
+#ifdef	CONFIG_PCMCIA
+
+#define PCMCIA_BOARD_MSG "GTH COMPACT FLASH"
+
+int pcmcia_voltage_set (int slot, int vcc, int vpp)
+{	/* Do nothing */
+	return 0;
+}
+
+int pcmcia_hardware_enable (int slot)
+{
+	volatile immap_t *immap;
+	volatile cpm8xx_t *cp;
+	volatile pcmconf8xx_t *pcmp;
+	volatile sysconf8xx_t *sysp;
+	uint reg, mask;
+
+	debug ("hardware_enable: GTH Slot %c\n", 'A' + slot);
+
+	immap = (immap_t *) CFG_IMMR;
+	sysp = (sysconf8xx_t *) (&(((immap_t *) CFG_IMMR)->im_siu_conf));
+	pcmp = (pcmconf8xx_t *) (&(((immap_t *) CFG_IMMR)->im_pcmcia));
+	cp = (cpm8xx_t *) (&(((immap_t *) CFG_IMMR)->im_cpm));
+
+	/* clear interrupt state, and disable interrupts */
+	pcmp->pcmc_pscr = PCMCIA_MASK (_slot_);
+	pcmp->pcmc_per &= ~PCMCIA_MASK (_slot_);
+
+	/*
+	* Disable interrupts, DMA, and PCMCIA buffers
+	* (isolate the interface) and assert RESET signal
+	*/
+	debug ("Disable PCMCIA buffers and assert RESET\n");
+	reg = 0;
+	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg |= __MY_PCMCIA_GCRX_CXOE;	/* active low  */
+	PCMCIA_PGCRX (_slot_) = reg;
+	udelay (500);
+
+	/*
+	* Make sure there is a card in the slot,
+	* then configure the interface.
+	*/
+	udelay (10000);
+	debug ("[%d] %s: PIPR(%p)=0x%x\n",
+	       __LINE__, __FUNCTION__,
+	       &(pcmp->pcmc_pipr), pcmp->pcmc_pipr);
+	if (pcmp->pcmc_pipr & 0x98000000) {
+		printf ("   No Card found\n");
+		return (1);
+	}
+
+	mask = PCMCIA_VS1 (slot) | PCMCIA_VS2 (slot);
+	reg = pcmp->pcmc_pipr;
+	debug ("PIPR: 0x%x ==> VS1=o%s, VS2=o%s\n",
+	       reg,
+	       (reg & PCMCIA_VS1 (slot)) ? "n" : "ff",
+	       (reg & PCMCIA_VS2 (slot)) ? "n" : "ff");
+
+	debug ("Enable PCMCIA buffers and stop RESET\n");
+	reg  =  PCMCIA_PGCRX (_slot_);
+	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg &= ~__MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX (_slot_) = reg;
+
+	udelay (250000);	/* some cards need >150 ms to come up :-( */
+
+	debug ("# hardware_enable done\n");
+
+	return 0;
+}
+#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+int pcmcia_hardware_disable(int slot)
+{
+	return 0;	/* No hardware to disable */
+}
+#endif
+
+#endif	/* CONFIG_PCMCIA */
diff --git a/board/gth2/Makefile b/board/gth2/Makefile
new file mode 100644
index 0000000000..8ef3a51d82
--- /dev/null
+++ b/board/gth2/Makefile
@@ -0,0 +1,41 @@
+#
+# (C) Copyright 2005
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	= $(BOARD).o flash.o ee_access.o
+SOBJS	= lowlevel_init.o
+
+$(LIB):	.depend $(OBJS) $(SOBJS)
+	$(AR) crv $@ $(OBJS) $(SOBJS)
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/board/gth2/config.mk b/board/gth2/config.mk
new file mode 100644
index 0000000000..2bc1338e3e
--- /dev/null
+++ b/board/gth2/config.mk
@@ -0,0 +1,41 @@
+#
+# (C) Copyright 2004-2005
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+#  AMD Alchemy AU1000, MIPS32 core
+#
+
+ifeq ($(TBASE),0)
+TEXT_BASE = 0
+else
+ifeq ($(TBASE),1)
+TEXT_BASE = 0xbfc10070
+else
+ifeq ($(TBASE),2)
+TEXT_BASE = 0xbfc30070
+else
+## Only to make ordinary make work
+TEXT_BASE = 0x90000000
+endif
+endif
+endif
diff --git a/board/gth2/ee_access.c b/board/gth2/ee_access.c
new file mode 100644
index 0000000000..d4798c4ba3
--- /dev/null
+++ b/board/gth2/ee_access.c
@@ -0,0 +1,347 @@
+/* Module for handling DALLAS DS2438, smart battery monitor
+   Chip can store up to 40 bytes of user data in EEPROM,
+   perform temp, voltage and current measurements.
+   Chip also contains a unique serial number.
+
+   Always read/write LSb first
+
+   For documentaion, see data sheet for DS2438, 2438.pdf
+
+   By Thomas.Lange@corelatus.com 001025
+
+   Copyright (C) 2000-2005 Corelatus AB */
+
+/* This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/au1x00.h>
+#include <asm/io.h>
+#include "ee_dev.h"
+#include "ee_access.h"
+
+/* static int Debug = 1; */
+#undef E_DEBUG
+#define E_DEBUG(fmt,args...) /* */
+/* #define E_DEBUG(fmt,args...) printk("EEA:"fmt,##args); */
+
+/* We dont have kernel functions */
+#define printk printf
+#define KERN_DEBUG
+#define KERN_ERR
+#define EIO 1
+
+#ifndef TRUE
+#define TRUE 1
+#endif
+#ifndef FALSE
+#define FALSE 0
+#endif
+
+/* lookup table ripped from DS app note 17, understanding and using cyclic redundancy checks... */
+
+static u8 crc_lookup[256] = {
+	0,	94,	188,	226,	97,	63,	221,	131,
+	194,	156,	126,	32,	163,	253,	31,	65,
+	157,	195,	33,	127,	252,	162,	64,	30,
+	95,	1,	227,	189,	62,	96,	130,	220,
+	35,	125,	159,	193,	66,	28,	254,	160,
+	225,	191,	93,	3,	128,	222,	60,	98,
+	190,	224,	2,	92,	223,	129,	99,	61,
+	124,	34,	192,	158,	29,	67,	161,	255,
+	70,	24,	250,	164,	39,	121,	155,	197,
+	132,	218,	56,	102,	229,	187,	89,	7,
+	219,	133,	103,	57,	186,	228,	6,	88,
+	25,	71,	165,	251,	120,	38,	196,	154,
+	101,	59,	217,	135,	4,	90,	184,	230,
+	167,	249,	27,	69,	198,	152,	122,	36,
+	248,	166,	68,	26,	153,	199,	37,	123,
+	58,	100,	134,	216,	91,	5,	231,	185,
+	140,	210,	48,	110,	237,	179,	81,	15,
+	78,	16,	242,	172,	47,	113,	147,	205,
+	17,	79,	173,	243,	112,	46,	204,	146,
+	211,	141,	111,	49,	178,	236,	14,	80,
+	175,	241,	19,	77,	206,	144,	114,	44,
+	109,	51,	209,	143,	12,	82,	176,	238,
+	50,	108,	142,	208,	83,	13,	239,	177,
+	240,	174,	76,	18,	145,	207,	45,	115,
+	202,	148,	118,	40,	171,	245,	23,	73,
+	8,	86,	180,	234,	105,	55,	213,	139,
+	87,	9,	235,	181,	54,	104,	138,	212,
+	149,	203,	41,	119,	244,	170,	72,	22,
+	233,	183,	85,	11,	136,	214,	52,	106,
+	43,	117,	151,	201,	74,	20,	246,	168,
+	116,	42,	200,	150,	21,	75,	169,	247,
+	182,	232,	10,	84,	215,	137,	107,	53
+};
+
+static void
+write_gpio_data(int value ){
+	if(value){
+		/* Tristate */
+		gpio_tristate(GPIO_EEDQ);
+	}
+	else{
+		/* Drive 0 */
+		gpio_clear(GPIO_EEDQ);
+	}
+}
+
+static u8 make_new_crc( u8 Old_crc, u8 New_value ){
+	/* Compute a new checksum with new byte, using previous checksum as input
+	   See DS app note 17, understanding and using cyclic redundancy checks...
+	   Also see DS2438, page 11 */
+	return( crc_lookup[Old_crc ^ New_value ]);
+}
+
+int ee_crc_ok( u8 *Buffer, int Len, u8 Crc ){
+	/* Check if the checksum for this buffer is correct */
+	u8 Curr_crc=0;
+	int i;
+	u8 *Curr_byte = Buffer;
+
+	for(i=0;i<Len;i++){
+		Curr_crc = make_new_crc( Curr_crc, *Curr_byte);
+		Curr_byte++;
+	}
+	E_DEBUG("Calculated CRC = 0x%x, read = 0x%x\n", Curr_crc, Crc);
+
+	if(Curr_crc == Crc){
+		/* Good */
+		return(TRUE);
+	}
+	printk(KERN_ERR"EE checksum error, Calculated CRC = 0x%x, read = 0x%x\n", Curr_crc, Crc);
+	return(FALSE);
+}
+
+static void
+set_idle(void){
+	/* Send idle and keep start time
+	   Continous 1 is idle */
+	WRITE_PORT(1);
+}
+
+
+static int
+do_cpu_reset(void){
+	/* Release reset and verify that chip responds with presence pulse */
+	int Retries=0;
+	while(Retries<15){
+		udelay(RESET_LOW_TIME);
+
+		/* Send reset */
+		WRITE_PORT(0);
+		udelay(RESET_LOW_TIME);
+
+		/* Release reset */
+		WRITE_PORT(1);
+
+		/* Wait for EEPROM to drive output */
+		udelay(PRESENCE_TIMEOUT);
+		if(!READ_PORT){
+			/* Ok, EEPROM is driving a 0 */
+			E_DEBUG("Presence detected\n");
+			if(Retries){
+				E_DEBUG("Retries %d\n",Retries);
+			}
+			/* Make sure chip releases pin */
+			udelay(PRESENCE_LOW_TIME);
+			return 0;
+		}
+		Retries++;
+	}
+
+	printk(KERN_ERR"eeprom did not respond when releasing reset\n");
+
+	/* Make sure chip releases pin */
+	udelay(PRESENCE_LOW_TIME);
+
+	/* Set to idle again */
+	set_idle();
+
+	return(-EIO);
+}
+
+static u8
+read_cpu_byte(void){
+	/* Read a single byte from EEPROM
+	   Read LSb first */
+	int i;
+	int Value;
+	u8 Result=0;
+	u32 Flags;
+
+	E_DEBUG("Reading byte\n");
+
+	for(i=0;i<8;i++){
+		/* Small delay between pulses */
+		udelay(1);
+
+#ifdef __KERNEL__
+		/* Disable irq */
+		save_flags(Flags);
+		cli();
+#endif
+
+		/* Pull down pin short time to start read
+		   See page 26 in data sheet */
+
+		WRITE_PORT(0);
+		udelay(READ_LOW);
+		WRITE_PORT(1);
+
+		/* Wait for chip to drive pin */
+		udelay(READ_TIMEOUT);
+
+		Value = READ_PORT;
+		if(Value)
+			Value=1;
+
+#ifdef __KERNEL__
+		/* Enable irq */
+		restore_flags(Flags);
+#endif
+
+		/* Wait for chip to release pin */
+		udelay(TOTAL_READ_LOW-READ_TIMEOUT);
+
+		/* LSb first */
+		Result|=Value<<i;
+		/* E_DEBUG("Read %d\n",Value); */
+
+	}
+
+	E_DEBUG("Read byte 0x%x\n",Result);
+
+	return(Result);
+}
+
+static void
+write_cpu_byte(u8 Byte){
+	/* Write a single byte to EEPROM
+	   Write LSb first */
+	int i;
+	int Value;
+	u32 Flags;
+
+	E_DEBUG("Writing byte 0x%x\n",Byte);
+
+	for(i=0;i<8;i++){
+		/* Small delay between pulses */
+		udelay(1);
+		Value = Byte&1;
+
+#ifdef __KERNEL__
+		/* Disable irq */
+		save_flags(Flags);
+		cli();
+#endif
+
+		/* Pull down pin short time for a 1, long time for a 0
+		   See page 26 in data sheet */
+
+		WRITE_PORT(0);
+		if(Value){
+			/* Write a 1 */
+			udelay(WRITE_1_LOW);
+		}
+		else{
+			/* Write a 0 */
+			udelay(WRITE_0_LOW);
+		}
+
+		WRITE_PORT(1);
+
+#ifdef __KERNEL__
+		/* Enable irq */
+		restore_flags(Flags);
+#endif
+
+		if(Value)
+			/* Wait for chip to read the 1 */
+			udelay(TOTAL_WRITE_LOW-WRITE_1_LOW);
+
+		/* E_DEBUG("Wrote %d\n",Value); */
+		Byte>>=1;
+	}
+}
+
+int ee_do_cpu_command( u8 *Tx, int Tx_len, u8 *Rx, int Rx_len, int Send_skip ){
+	/* Execute this command string, including
+	   giving reset and setting to idle after command
+	   if Rx_len is set, we read out data from EEPROM */
+	int i;
+
+	E_DEBUG("Command, Tx_len %d, Rx_len %d\n", Tx_len, Rx_len );
+
+	if(do_cpu_reset()){
+		/* Failed! */
+		return(-EIO);
+	}
+
+	if(Send_skip)
+		/* Always send SKIP_ROM first to tell chip we are sending a command,
+		   except when we read out rom data for chip */
+		write_cpu_byte(SKIP_ROM);
+
+	/* Always have Tx data */
+	for(i=0;i<Tx_len;i++){
+		write_cpu_byte(Tx[i]);
+	}
+
+	if(Rx_len){
+		for(i=0;i<Rx_len;i++){
+			Rx[i]=read_cpu_byte();
+		}
+	}
+
+	set_idle();
+
+	E_DEBUG("Command done\n");
+
+	return(0);
+}
+
+int ee_init_cpu_data(void){
+	int i;
+	u8 Tx[10];
+
+	/* Leave it floting since altera is driving the same pin */
+	set_idle();
+
+	/* Copy all User EEPROM data to scratchpad */
+	for(i=0;i<USER_PAGES;i++){
+		Tx[0]=RECALL_MEMORY;
+		Tx[1]=EE_USER_PAGE_0+i;
+		if(ee_do_cpu_command(Tx,2,NULL,0,TRUE)) return(-EIO);
+	}
+
+	/* Make sure chip doesnt store measurements in NVRAM */
+	Tx[0]=WRITE_SCRATCHPAD;
+	Tx[1]=0; /* Page */
+	Tx[2]=9;
+	if(ee_do_cpu_command(Tx,3,NULL,0,TRUE)) return(-EIO);
+
+	Tx[0]=COPY_SCRATCHPAD;
+	if(ee_do_cpu_command(Tx,2,NULL,0,TRUE)) return(-EIO);
+
+	for(i=0;i<10;i++){
+		udelay(1000);
+	}
+
+	return(0);
+}
diff --git a/board/gth2/ee_access.h b/board/gth2/ee_access.h
new file mode 100644
index 0000000000..926199de3c
--- /dev/null
+++ b/board/gth2/ee_access.h
@@ -0,0 +1,30 @@
+/* By Thomas.Lange@Corelatus.com 001025 */
+
+/* Definitions for EEPROM/VOLT METER  DS2438 */
+/* Copyright (C) 2000-2005 Corelatus AB */
+
+#ifndef INCeeaccessh
+#define INCeeaccessh
+
+#include <asm/types.h>
+#include "ee_dev.h"
+
+int ee_do_cpu_command( u8 *Tx, int Tx_len, u8 *Rx, int Rx_len, int Send_skip );
+int ee_init_cpu_data(void);
+
+int ee_crc_ok( u8 *Buffer, int Len, u8 Crc );
+
+/* Defs for altera reg */
+#define EE_WRITE_SHIFT 8 /* bits to shift left */
+#define EE_READ_SHIFT 16 /* bits to shift left */
+#define EE_DONE  0x80000000
+#define EE_BUSY  0x40000000
+#define EE_ERROR 0x20000000
+
+/* Commands */
+#define EE_CMD_NOP      0
+#define EE_CMD_INIT_RES 1
+#define EE_CMD_WR_BYTE  2
+#define EE_CMD_RD_BYTE  3
+
+#endif /* INCeeaccessh */
diff --git a/board/gth2/ee_dev.h b/board/gth2/ee_dev.h
new file mode 100644
index 0000000000..89ef2f82c8
--- /dev/null
+++ b/board/gth2/ee_dev.h
@@ -0,0 +1,96 @@
+/* By Thomas.Lange@Corelatus.com 001025 */
+/* Definitions for EEPROM/VOLT METER  DS2438 */
+/* Copyright (C) 2000-2005 Corelatus AB */
+
+/* This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef INCeedevh
+#define INCeedevh
+
+#define E_DEBUG(fmt,args...) if( Debug ) printk(KERN_DEBUG"EE: " fmt, ##args)
+
+/* MIPS */
+#define WRITE_PORT(Value) write_gpio_data(Value)
+
+#define READ_PORT (gpio_read()&GPIO_EEDQ)
+
+/* 64 bytes chip */
+#define EE_CHIP_SIZE 64
+
+/* Board with new current resistor */
+#define EE_GTH_0304 1
+
+/* new dsp and 64 MB SDRAM */
+#define EE_DSP_64 0x10
+
+/* microsecs */
+/* Pull line down at least this long for reset pulse */
+#define RESET_LOW_TIME    490
+
+/* Read presence pulse after we release reset pulse */
+#define PRESENCE_TIMEOUT  100
+#define PRESENCE_LOW_TIME 200
+
+#define WRITE_0_LOW 60
+#define WRITE_1_LOW 1
+#define TOTAL_WRITE_LOW 60
+
+#define READ_LOW        1
+#define READ_TIMEOUT   10
+#define TOTAL_READ_LOW 70
+
+/* Rom function commands */
+#define READ_ROM   0x33
+#define MATCH_ROM  0x55
+#define SKIP_ROM   0xCC
+#define SEARCH_ROM 0xF0
+
+
+/* Memory_command_function */
+#define WRITE_SCRATCHPAD 0x4E
+#define READ_SCRATCHPAD  0xBE
+#define COPY_SCRATCHPAD  0x48
+#define RECALL_MEMORY    0xB8
+#define CONVERT_TEMP     0x44
+#define CONVERT_VOLTAGE  0xB4
+
+/* Chip is divided in 8 pages, 8 bytes each */
+
+#define EE_PAGE_SIZE 8
+
+/* All chip data we want are in page 0 */
+
+/* Bytes in page 0 */
+#define EE_P0_STATUS   0
+#define EE_P0_TEMP_LSB 1
+#define EE_P0_TEMP_MSB 2
+#define EE_P0_VOLT_LSB 3
+#define EE_P0_VOLT_MSB 4
+#define EE_P0_CURRENT_LSB 5
+#define EE_P0_CURRENT_MSB 6
+
+
+/* 40 byte user data is located at page 3-7 */
+#define EE_USER_PAGE_0 3
+#define USER_PAGES 5
+
+/* Layout of gth user pages usage */
+/* Bytes 0-16   ethernet addr in ascii ( len 17 ) */
+
+#define EE_ETHERNET_OFFSET       0
+
+#endif /* INCeedevh */
diff --git a/board/gth2/flash.c b/board/gth2/flash.c
new file mode 100644
index 0000000000..f96edffa2d
--- /dev/null
+++ b/board/gth2/flash.c
@@ -0,0 +1,43 @@
+/*
+ * (C) Copyright 2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips */
+
+/*-----------------------------------------------------------------------
+ * flash_init()
+ *
+ * sets up flash_info and returns size of FLASH (bytes)
+ */
+unsigned long flash_init (void)
+{
+	printf ("Skipping flash_init\n");
+	return (0);
+}
+
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+	printf ("write_buff not implemented\n");
+	return (-1);
+}
diff --git a/board/gth2/gth2.c b/board/gth2/gth2.c
new file mode 100644
index 0000000000..ffeaf587b5
--- /dev/null
+++ b/board/gth2/gth2.c
@@ -0,0 +1,435 @@
+/*
+ * (C) Copyright 2005
+ * Thomas.Lange@corelatus.se
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/au1x00.h>
+#include <asm/addrspace.h>
+#include <asm/mipsregs.h>
+#include <watchdog.h>
+
+#include "ee_access.h"
+
+static int wdi_status = 0;
+
+unsigned long mips_io_port_base = 0;
+
+#define SDRAM_SIZE ((64*1024*1024)-(12*4096))
+
+
+#define SERIAL_LOG_BUFFER KSEG1ADDR(SDRAM_SIZE + (8*4096))
+
+void inline log_serial_char(char c){
+	char *serial_log_buffer = (char*)SERIAL_LOG_BUFFER;
+	int serial_log_offset;
+	u32 *serial_log_offsetp = (u32*)SERIAL_LOG_BUFFER;
+
+	serial_log_offset = *serial_log_offsetp;
+
+	*(serial_log_buffer + serial_log_offset) = c;
+
+	serial_log_offset++;
+
+	if(serial_log_offset >= 4096){
+		serial_log_offset = 4;
+	}
+	*serial_log_offsetp = serial_log_offset;
+}
+
+void init_log_serial(void){
+	char *serial_log_buffer = (char*)SERIAL_LOG_BUFFER;
+	u32 *serial_log_offsetp = (u32*)SERIAL_LOG_BUFFER;
+
+	/* Copy buffer from last run */
+	memcpy(serial_log_buffer + 4096,
+	       serial_log_buffer,
+	       4096);
+
+	memset(serial_log_buffer, 0, 4096);
+
+	*serial_log_offsetp = 4;
+}
+
+
+void hw_watchdog_reset(void){
+	volatile u32 *sys_outputset = (volatile u32*)SYS_OUTPUTSET;
+	volatile u32 *sys_outputclear = (volatile u32*)SYS_OUTPUTCLR;
+	if(wdi_status){
+		*sys_outputset = GPIO_CPU_LED|GPIO_WDI;
+		wdi_status = 0;
+	}
+	else{
+		*sys_outputclear = GPIO_CPU_LED|GPIO_WDI;
+		wdi_status = 1;
+	}
+}
+
+long int initdram(int board_type)
+{
+	/* Sdram is setup by assembler code */
+	/* If memory could be changed, we should return the true value here */
+
+	WATCHDOG_RESET();
+
+	return (SDRAM_SIZE);
+}
+
+/* In cpu/mips/cpu.c */
+void write_one_tlb( int index, u32 pagemask, u32 hi, u32 low0, u32 low1 );
+
+void set_ledcard(u32 value){
+	/* Clock 24 bits to led card */
+	int i;
+	volatile u32 *sys_outputset = (volatile u32*)SYS_OUTPUTSET;
+	volatile u32 *sys_outputclr = (volatile u32*)SYS_OUTPUTCLR;
+
+	/* Start with known values */
+	*sys_outputclr = GPIO_LEDCLK|GPIO_LEDD;
+
+	for(i=0;i<24;i++){
+		if(value&0x00800000){
+			*sys_outputset = GPIO_LEDD;
+		}
+		else{
+			*sys_outputclr = GPIO_LEDD;
+		}
+		udelay(1);
+		*sys_outputset = GPIO_LEDCLK;
+		udelay(1);
+		*sys_outputclr = GPIO_LEDCLK;
+		udelay(1);
+
+		value<<=1;
+	}
+	/* Data is enable output */
+	*sys_outputset = GPIO_LEDD;
+}
+
+int checkboard (void)
+{
+	volatile u32 *sys_counter = (volatile u32*)SYS_COUNTER_CNTRL;
+	volatile u32 *sys_outputset = (volatile u32*)SYS_OUTPUTSET;
+	volatile u32 *sys_outputclr = (volatile u32*)SYS_OUTPUTCLR;
+	u32 proc_id;
+
+	WATCHDOG_RESET();
+
+	*sys_counter = 0x100; /* Enable 32 kHz oscillator for RTC/TOY */
+
+	proc_id = read_32bit_cp0_register(CP0_PRID);
+
+	switch (proc_id >> 24) {
+	case 0:
+		puts ("Board: GTH2\n");
+		printf ("CPU: Au1000 500 MHz, id: 0x%02x, rev: 0x%02x\n",
+			(proc_id >> 8) & 0xFF, proc_id & 0xFF);
+		break;
+	default:
+		printf ("Unsupported cpu %d, proc_id=0x%x\n", proc_id >> 24, proc_id);
+	}
+#ifdef CONFIG_IDE_PCMCIA
+	/* PCMCIA is on a 36 bit physical address.
+	   We need to map it into a 32 bit addresses */
+	write_one_tlb(20,                 /* index */
+		      0x01ffe000,         /* Pagemask, 16 MB pages */
+		      CFG_PCMCIA_IO_BASE, /* Hi */
+		      0x3C000017,         /* Lo0 */
+		      0x3C200017);        /* Lo1 */
+
+	write_one_tlb(21,                   /* index */
+		      0x01ffe000,           /* Pagemask, 16 MB pages */
+		      CFG_PCMCIA_ATTR_BASE, /* Hi */
+		      0x3D000017,           /* Lo0 */
+		      0x3D200017);          /* Lo1 */
+
+	write_one_tlb(22,                   /* index */
+		      0x01ffe000,           /* Pagemask, 16 MB pages */
+		      CFG_PCMCIA_MEM_ADDR,  /* Hi */
+		      0x3E000017,           /* Lo0 */
+		      0x3E200017);          /* Lo1 */
+
+#endif	/* CONFIG_IDE_PCMCIA */
+
+	/* Wait for GPIO ports to become stable */
+	udelay(5000); /* FIXME */
+
+	/* Release reset of ethernet PHY chips */
+	/* Always do this, because linux does not know about it */
+	*sys_outputset = GPIO_ERESET;
+
+	/* Kill FPGA:s */
+	*sys_outputclr = GPIO_CACONFIG|GPIO_DPACONFIG;
+	udelay(2);
+	*sys_outputset = GPIO_CACONFIG|GPIO_DPACONFIG;
+
+	/* Turn front led yellow */
+	set_ledcard(0x00100000);
+
+	return 0;
+}
+
+#define POWER_OFFSET    0xF0000
+#define SW_WATCHDOG_REASON 13
+
+#define BOOTDATA_OFFSET 0xF8000
+#define MAX_ATTEMPTS 5
+
+#define FAILSAFE_BOOT 1
+#define SYSTEM_BOOT   2
+#define SYSTEM2_BOOT  3
+
+#define WRITE_FLASH16(a, d)      \
+do                              \
+{                               \
+  *((volatile u16 *) (a)) = (d);\
+ } while(0)
+
+static void write_bootdata (volatile u16 * addr, u8 System, u8 Count)
+{
+	u16 data;
+	volatile u16 *flash = (u16 *) (CFG_FLASH_BASE);
+
+	switch(System){
+	case FAILSAFE_BOOT:
+		printf ("Setting failsafe boot in flash\n");
+		break;
+	case SYSTEM_BOOT:
+		printf ("Setting system boot in flash\n");
+		break;
+	case SYSTEM2_BOOT:
+		printf ("Setting system2 boot in flash\n");
+		break;
+	default:
+		printf ("Invalid system data %u, setting failsafe\n", System);
+		System = FAILSAFE_BOOT;
+	}
+
+	if ((Count < 1) | (Count > MAX_ATTEMPTS)) {
+		printf ("Invalid boot count %u, setting 1\n", Count);
+		Count = 1;
+	}
+
+	printf ("Boot attempt %d\n", Count);
+
+	data = (System << 8) | Count;
+	/* AMD 16 bit */
+	WRITE_FLASH16 (&flash[0x555], 0xAAAA);
+	WRITE_FLASH16 (&flash[0x2AA], 0x5555);
+	WRITE_FLASH16 (&flash[0x555], 0xA0A0);
+
+	WRITE_FLASH16 (addr, data);
+}
+
+static int random_system(void){
+	/* EEPROM read failed. Just try to choose one
+	   system release and hope it works */
+
+	/* FIXME */
+	return(SYSTEM_BOOT);
+}
+
+static int switch_system(int old_system){
+	u8 Rx[10];
+	u8 Tx[5];
+	int valid_release;
+
+	if(old_system==FAILSAFE_BOOT){
+		/* Find out which system release to use */
+
+		/* Copy from nvram to scratchpad */
+		Tx[0] = RECALL_MEMORY;
+		Tx[1] = 7; /* Page */
+		if (ee_do_cpu_command (Tx, 2, NULL, 0, 1)) {
+			printf ("EE user page 7 recall failed\n");
+			return (random_system());
+		}
+
+		Tx[0] = READ_SCRATCHPAD;
+		if (ee_do_cpu_command (Tx, 2, Rx, 9, 1)) {
+			printf ("EE user page 7 read failed\n");
+			return (random_system());
+		}
+		/* Crc in 9:th byte */
+		if (!ee_crc_ok (Rx, 8, *(Rx + 8))) {
+			printf ("EE read failed, page 7. CRC error\n");
+			return (random_system());
+		}
+
+		valid_release = Rx[7];
+		if((valid_release==0xFF)|
+		   ((valid_release&1) == 0)){
+			return(SYSTEM_BOOT);
+		}
+		else{
+			return(SYSTEM2_BOOT);
+		}
+	}
+	else{
+		return(FAILSAFE_BOOT);
+	}
+}
+
+static void check_boot_tries (void)
+{
+	/* Count the number of boot attemps
+	   switch system if too many */
+
+	int i;
+	volatile u16 *addr;
+	volatile u16 data;
+	u8 system = FAILSAFE_BOOT;
+	u8 count;
+
+	addr = (u16 *) (CFG_FLASH_BASE + BOOTDATA_OFFSET);
+
+	if (*addr == 0xFFFF) {
+		printf ("*** No bootdata exists. ***\n");
+		write_bootdata (addr, FAILSAFE_BOOT, 1);
+	} else {
+		/* Search for latest written bootdata */
+		i = 0;
+		while ((*(addr + 1) != 0xFFFF) & (i < 8000)) {
+			addr++;
+			i++;
+		}
+		if (i >= 8000) {
+			/* Whoa, dont write any more */
+			printf ("*** No bootdata found. Not updating flash***\n");
+		} else {
+			/* See how many times we have tried to boot real system */
+			data = *addr;
+			system = data >> 8;
+			count = data & 0xFF;
+			if ((system != SYSTEM_BOOT) &
+			    (system != SYSTEM2_BOOT) &
+			    (system != FAILSAFE_BOOT)) {
+				printf ("*** Wrong system %d\n", system);
+				system = FAILSAFE_BOOT;
+				count = 1;
+			} else {
+				switch (count) {
+				case 0:
+				case 1:
+				case 2:
+				case 3:
+				case 4:
+					/* Try same system again if needed */
+					count++;
+					break;
+
+				case 5:
+					/* Switch system and reset tries */
+					count = 1;
+					system = switch_system(system);
+					printf ("***Too many boot attempts, switching system***\n");
+					break;
+				default:
+					/* Switch system, start over and hope it works */
+					printf ("***Unexpected data on addr 0x%x, %u***\n",
+						(u32) addr, data);
+					count = 1;
+					system = switch_system(system);
+				}
+			}
+			write_bootdata (addr + 1, system, count);
+		}
+	}
+	switch(system){
+	case FAILSAFE_BOOT:
+		printf ("Booting failsafe system\n");
+		setenv ("bootargs", "panic=1 root=/dev/hda7");
+		setenv ("bootcmd", "ide reset;disk 0x81000000 0:5;run addmisc;bootm");
+		break;
+
+	case SYSTEM_BOOT:
+		printf ("Using normal system\n");
+		setenv ("bootargs", "panic=1 root=/dev/hda4");
+		setenv ("bootcmd", "ide reset;disk 0x81000000 0:2;run addmisc;bootm");
+		break;
+
+	case SYSTEM2_BOOT:
+		printf ("Using normal system2\n");
+		setenv ("bootargs", "panic=1 root=/dev/hda9");
+		setenv ("bootcmd", "ide reset;disk 0x81000000 0:8;run addmisc;bootm");
+		break;
+	default:
+		printf ("Invalid system %d\n", system);
+		printf ("Hanging\n");
+		while(1);
+	}
+}
+
+int misc_init_r(void){
+	u8 Rx[80];
+	u8 Tx[5];
+	int page;
+	int read = 0;
+
+	WATCHDOG_RESET();
+
+	if (ee_init_cpu_data ()) {
+		printf ("EEPROM init failed\n");
+		return (0);
+	}
+
+	/* Check which release to boot */
+	check_boot_tries ();
+
+	/* Read the pages where ethernet address is stored */
+
+	for (page = EE_USER_PAGE_0; page <= EE_USER_PAGE_0 + 2; page++) {
+		/* Copy from nvram to scratchpad */
+		Tx[0] = RECALL_MEMORY;
+		Tx[1] = page;
+		if (ee_do_cpu_command (Tx, 2, NULL, 0, 1)) {
+			printf ("EE user page %d recall failed\n", page);
+			return (0);
+		}
+
+		Tx[0] = READ_SCRATCHPAD;
+		if (ee_do_cpu_command (Tx, 2, Rx + read, 9, 1)) {
+			printf ("EE user page %d read failed\n", page);
+			return (0);
+		}
+		/* Crc in 9:th byte */
+		if (!ee_crc_ok (Rx + read, 8, *(Rx + read + 8))) {
+			printf ("EE read failed, page %d. CRC error\n", page);
+			return (0);
+		}
+		read += 8;
+	}
+
+	/* Add eos after eth addr */
+	Rx[17] = 0;
+
+	printf ("Ethernet addr read from eeprom: %s\n\n", Rx);
+
+	if ((Rx[2] != ':') |
+	    (Rx[5] != ':') |
+	    (Rx[8] != ':') | (Rx[11] != ':') | (Rx[14] != ':')) {
+		printf ("*** ethernet addr invalid, using default ***\n");
+	} else {
+		setenv ("ethaddr", Rx);
+	}
+	return (0);
+}
diff --git a/board/gth2/lowlevel_init.S b/board/gth2/lowlevel_init.S
new file mode 100644
index 0000000000..983ff704ac
--- /dev/null
+++ b/board/gth2/lowlevel_init.S
@@ -0,0 +1,454 @@
+/* Memory sub-system initialization code */
+
+#include <config.h>
+#include <version.h>
+#include <asm/regdef.h>
+#include <asm/au1x00.h>
+#include <asm/mipsregs.h>
+
+#define CP0_Config0		$16
+#define MEM_1MS			((CFG_MHZ) * 1000)
+#define GPIO_RJ1LY     (1<<22)
+#define GPIO_CFRESET   (1<<10)
+
+	.text
+	.set noreorder
+	.set mips32
+
+	.globl	lowlevel_init
+lowlevel_init:
+	/*
+	 * Step 2) Establish Status Register
+	 * (set BEV, clear ERL, clear EXL, clear IE)
+	 */
+	li	t1, 0x00400000
+	mtc0	t1, CP0_STATUS
+
+	/*
+	 * Step 3) Establish CP0 Config0
+	 * (set OD, set K0=3)
+	 */
+	li	t1, 0x00080003
+	mtc0	t1, CP0_CONFIG
+
+	/*
+	 * Step 4) Disable Watchpoint facilities
+	 */
+	li t1, 0x00000000
+	mtc0	t1, CP0_WATCHLO
+	mtc0	t1, CP0_IWATCHLO
+	/*
+	 * Step 5) Disable the performance counters
+	 */
+	mtc0	zero, CP0_PERFORMANCE
+	nop
+
+	/*
+	 * Step 6) Establish EJTAG Debug register
+	 */
+	mtc0	zero, CP0_DEBUG
+	nop
+
+	/*
+	 * Step 7) Establish Cause
+	 * (set IV bit)
+	 */
+	li	t1, 0x00800000
+	mtc0	t1, CP0_CAUSE
+
+	/* Establish Wired (and Random) */
+	mtc0	zero, CP0_WIRED
+	nop
+
+	/* No workaround if running from ram */
+	lui	t0, 0xffc0
+	lui	t3, 0xbfc0
+	and	t1, ra, t0
+	bne	t1, t3, noCacheJump
+	nop
+
+	/*** From AMD YAMON ***/
+	/*
+	 * Step 8) Initialize the caches
+	 */
+	li		t0, (16*1024)
+	li		t1, 32
+	li		t2, 0x80000000
+	addu	t3, t0, t2
+cacheloop:
+	cache	0, 0(t2)
+	cache	1, 0(t2)
+	addu	t2, t1
+	bne		t2, t3, cacheloop
+	nop
+
+	/* Save return address */
+	move		t3, ra
+
+	/* Run from cacheable space now */
+	bal		cachehere
+	nop
+cachehere:
+	li		t1, ~0x20000000 /* convert to KSEG0 */
+	and		t0, ra, t1
+	addi	t0, 5*4			/* 5 insns beyond cachehere */
+	jr		t0
+	nop
+
+	/* Restore return address */
+	move		ra, t3
+
+	/*
+	 * Step 9) Initialize the TLB
+	 */
+	li		t0, 0			# index value
+	li		t1, 0x00000000		# entryhi value
+	li		t2, 32			# 32 entries
+
+tlbloop:
+	/* Probe TLB for matching EntryHi */
+	mtc0	t1, CP0_ENTRYHI
+	tlbp
+	nop
+
+	/* Examine Index[P], 1=no matching entry */
+	mfc0	t3, CP0_INDEX
+	li	t4, 0x80000000
+	and	t3, t4, t3
+	addiu	t1, t1, 1		# increment t1 (asid)
+	beq	zero, t3, tlbloop
+	nop
+
+	/* Initialize the TLB entry */
+	mtc0	t0, CP0_INDEX
+	mtc0	zero, CP0_ENTRYLO0
+	mtc0	zero, CP0_ENTRYLO1
+	mtc0	zero, CP0_PAGEMASK
+	tlbwi
+
+	/* Do it again */
+	addiu	t0, t0, 1
+	bne	t0, t2, tlbloop
+	nop
+
+	/* First setup pll:s to make serial work ok */
+	/* We have a 12.5 MHz crystal */
+	li	t0, SYS_CPUPLL
+	li	t1, 0x28  /* CPU clock, 500 MHz */
+	sw	t1, 0(t0)
+	sync
+	nop
+	nop
+
+	/* wait 1mS for clocks to settle */
+	li	t1, MEM_1MS
+1:	add	t1, -1
+	bne	t1, zero, 1b
+	nop
+	/* Setup AUX PLL */
+	li	t0, SYS_AUXPLL
+	li	t1, 0
+	sw	t1, 0(t0) /* aux pll */
+	sync
+
+	/*  Static memory controller */
+	/* RCE0 - can not change while fetching, do so from icache */
+	move		t2, ra /* Store return address */
+	bal		getAddr
+	nop
+
+getAddr:
+	move		t1, ra
+	move		ra, t2 /* Move return addess back */
+
+	cache	0x14,0(t1)
+	cache	0x14,32(t1)
+	/*** /From YAMON ***/
+
+noCacheJump:
+
+	/*  Static memory controller */
+
+	/* RCE0 AMD 29LV800 Flash */
+	li	t0, MEM_STCFG0
+	li	t1, 0x00000243
+	sw	t1, 0(t0)
+
+	li	t0, MEM_STTIME0
+	li	t1, 0x040181D7 /* FIXME */
+	sw	t1, 0(t0)
+
+	li	t0, MEM_STADDR0
+	li	t1, 0x11E03F80
+	sw	t1, 0(t0)
+
+	/* RCE1 PCMCIA 250ns */
+	li	t0, MEM_STCFG1
+	li	t1, 0x00000002
+	sw	t1, 0(t0)
+
+	li	t0, MEM_STTIME1
+	li	t1, 0x280E3E07
+	sw	t1, 0(t0)
+
+	li	t0, MEM_STADDR1
+	li	t1, 0x10000000
+	sw	t1, 0(t0)
+
+	/* RCE2 CP Altera */
+	li	t0, MEM_STCFG2
+	li	t1, 0x00000280 /* BE, EW */
+	sw	t1, 0(t0)
+
+	li	t0, MEM_STTIME2
+	li	t1, 0x0303000c
+	sw	t1, 0(t0)
+
+	li	t0, MEM_STADDR2
+	li	t1, 0x10c03f80 /* 1 MB */
+	sw	t1, 0(t0)
+
+	/* RCE3 DP Altera */
+	li	t0, MEM_STCFG3
+	li	t1, 0x00000280 /* BE, EW */
+	sw	t1, 0(t0)
+
+	li	t0, MEM_STTIME3
+	li	t1, 0x0303000c
+	sw	t1, 0(t0)
+
+	li	t0, MEM_STADDR3
+	li	t1, 0x10e03f80 /* 1 MB */
+	sw	t1, 0(t0)
+
+	sync
+
+	/* Set peripherals to a known state */
+	li	t0, IC0_CFG0CLR
+	li	t1, 0xFFFFFFFF
+	sw	t1, 0(t0)
+
+	li	t0, IC0_CFG0CLR
+	sw	t1, 0(t0)
+
+	li	t0, IC0_CFG1CLR
+	sw	t1, 0(t0)
+
+	li	t0, IC0_CFG2CLR
+	sw	t1, 0(t0)
+
+	li	t0, IC0_SRCSET
+	sw	t1, 0(t0)
+
+	li	t0, IC0_ASSIGNSET
+	sw	t1, 0(t0)
+
+	li	t0, IC0_WAKECLR
+	sw	t1, 0(t0)
+
+	li	t0, IC0_RISINGCLR
+	sw	t1, 0(t0)
+
+	li	t0, IC0_FALLINGCLR
+	sw	t1, 0(t0)
+
+	li	t0, IC0_TESTBIT
+	li	t1, 0x00000000
+	sw	t1, 0(t0)
+	sync
+
+	li	t0, IC1_CFG0CLR
+	li	t1, 0xFFFFFFFF
+	sw	t1, 0(t0)
+
+	li	t0, IC1_CFG0CLR
+	sw	t1, 0(t0)
+
+	li	t0, IC1_CFG1CLR
+	sw	t1, 0(t0)
+
+	li	t0, IC1_CFG2CLR
+	sw	t1, 0(t0)
+
+	li	t0, IC1_SRCSET
+	sw	t1, 0(t0)
+
+	li	t0, IC1_ASSIGNSET
+	sw	t1, 0(t0)
+
+	li	t0, IC1_WAKECLR
+	sw	t1, 0(t0)
+
+	li	t0, IC1_RISINGCLR
+	sw	t1, 0(t0)
+
+	li	t0, IC1_FALLINGCLR
+	sw	t1, 0(t0)
+
+	li	t0, IC1_TESTBIT
+	li	t1, 0x00000000
+	sw	t1, 0(t0)
+	sync
+
+	li	t0, SYS_FREQCTRL0
+	li	t1, 0x00000000
+	sw	t1, 0(t0)
+
+	li	t0, SYS_FREQCTRL1
+	li	t1, 0x00000000
+	sw	t1, 0(t0)
+
+	li	t0, SYS_CLKSRC
+	li	t1, 0x00000000
+	sw	t1, 0(t0)
+
+	li	t0, SYS_PININPUTEN
+	li	t1, 0x00000000
+	sw	t1, 0(t0)
+	sync
+
+	li	t0, 0xB1100100
+	li	t1, 0x00000000
+	sw	t1, 0(t0)
+
+	li	t0, 0xB1400100
+	li	t1, 0x00000000
+	sw	t1, 0(t0)
+
+
+	li	t0, SYS_WAKEMSK
+	li	t1, 0x00000000
+	sw	t1, 0(t0)
+
+	li	t0, SYS_WAKESRC
+	li	t1, 0x00000000
+	sw	t1, 0(t0)
+
+	/* wait 1mS before setup */
+	li	t1, MEM_1MS
+1:	add	t1, -1
+	bne	t1, zero, 1b
+	nop
+
+
+/* SDCS 0 SDRAM */
+	li	t0, MEM_SDMODE0
+	li	t1, 0x592CD1
+	sw	t1, 0(t0)
+
+	li	t0, MEM_SDMODE1
+	li	t1, 0x00000000
+	sw	t1, 0(t0)
+
+	li	t0, MEM_SDMODE2
+	li	t1, 0x00000000
+	sw	t1, 0(t0)
+
+/* 64 MB SDRAM at addr 0 */
+	li	t0, MEM_SDADDR0
+	li	t1, 0x001003F0
+	sw	t1, 0(t0)
+
+
+	li	t0, MEM_SDADDR1
+	li	t1, 0x00000000
+	sw	t1, 0(t0)
+
+	li	t0, MEM_SDADDR2
+	li	t1, 0x00000000
+	sw	t1, 0(t0)
+
+	sync
+
+	li	t0, MEM_SDREFCFG
+	li	t1, 0x880007A1 /* Disable */
+	sw	t1, 0(t0)
+	sync
+
+	li	t0, MEM_SDPRECMD
+	sw	zero, 0(t0)
+	sync
+
+	li	t0, MEM_SDAUTOREF
+	sw	zero, 0(t0)
+	sync
+	sw	zero, 0(t0)
+	sync
+
+	li	t0, MEM_SDREFCFG
+	li	t1, 0x8A0007A1 /* Enable */
+	sw	t1, 0(t0)
+	sync
+
+	li	t0, MEM_SDWRMD0
+	li	t1, 0x00000023
+	sw	t1, 0(t0)
+	sync
+
+	/* wait 1mS after setup */
+	li	t1, MEM_1MS
+1:	add	t1, -1
+	bne	t1, zero, 1b
+	nop
+
+	/* Setup GPIO pins */
+
+	li	t0, SYS_PINFUNC
+	li	t1, 0x00007025 /* 0x8080 */
+	sw	t1, 0(t0)
+
+	li	t0, SYS_TRIOUTCLR
+	li	t1, 0xFFFFFFFF /* 0x1FFF */
+	sw	t1, 0(t0)
+
+	/* Turn yellow front led on */
+	/* Release reset on CF */
+	li	t0, SYS_OUTPUTCLR
+	li	t1, GPIO_RJ1LG
+	sw	t1, 0(t0)
+	li	t0, SYS_OUTPUTSET
+	li	t1, GPIO_RJ1LY|GPIO_CFRESET
+	sw	t1, 0(t0)
+	sync
+	j clearmem
+	nop
+
+	.globl	memtest
+memtest:
+	/* Fill memory with address */
+	li	t0, 0x80000000
+	li	t1, 0xFFF000 /* 64 MB */
+mt0:	sw	t0, 0(t0)
+	add	t1, -1
+	add	t0, 4
+	bne	t1, zero, mt0
+	nop
+	nop
+	/* Verify addr */
+	li	t0, 0x80000000
+	li	t1, 0xFFF000 /* 64 MB */
+mt1:	lw	t2, 0(t0)
+	bne	t0, t2, memhang
+	add	t1, -1
+	add	t0, 4
+	bne	t1, zero, mt1
+	nop
+	nop
+	.globl	clearmem
+clearmem:
+		/* Clear memory */
+	li	t0, 0x80000000
+	li	t1, 0xFFF000 /* 64 MB */
+mtc:	sw	zero, 0(t0)
+	add	t1, -1
+	add	t0, 4
+	bne	t1, zero, mtc
+	nop
+	nop
+memtestend:
+	j	ra
+	nop
+
+memhang:
+	b	memhang
+	nop
diff --git a/board/gth2/u-boot.lds b/board/gth2/u-boot.lds
new file mode 100644
index 0000000000..8ba0b6d4c1
--- /dev/null
+++ b/board/gth2/u-boot.lds
@@ -0,0 +1,68 @@
+/*
+ * (C) Copyright 2003-2005
+ * Wolfgang Denk Engineering, <wd@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+OUTPUT_FORMAT("elf32-bigmips", "elf32-bigmips", "elf32-bigmips")
+*/
+OUTPUT_FORMAT("elf32-tradbigmips", "elf32-tradbigmips", "elf32-tradbigmips")
+OUTPUT_ARCH(mips)
+ENTRY(_start)
+SECTIONS
+{
+	. = 0x00000000;
+
+	. = ALIGN(4);
+	.text       :
+	{
+	  *(.text)
+	}
+
+	. = ALIGN(4);
+	.rodata  : { *(.rodata) }
+
+	. = ALIGN(4);
+	.data  : { *(.data) }
+
+	. = ALIGN(4);
+	.sdata  : { *(.sdata) }
+
+	_gp = ALIGN(16);
+
+	__got_start = .;
+	.got  : { *(.got) }
+	__got_end = .;
+
+	.sdata  : { *(.sdata) }
+
+	__u_boot_cmd_start = .;
+	.u_boot_cmd : { *(.u_boot_cmd) }
+	__u_boot_cmd_end = .;
+
+	uboot_end_data = .;
+	num_got_entries = (__got_end - __got_start) >> 2;
+
+	. = ALIGN(4);
+	.sbss  : { *(.sbss) }
+	.bss  : { *(.bss) }
+	uboot_end = .;
+}
diff --git a/board/icu862/Makefile b/board/icu862/Makefile
index 7a2014d466..7b2b545820 100644
--- a/board/icu862/Makefile
+++ b/board/icu862/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= lib$(BOARD).a
 
-OBJS	= $(BOARD).o flash.o
+OBJS	= $(BOARD).o flash.o pcmcia.o
 
 $(LIB):	.depend $(OBJS)
 	$(AR) crv $@ $(OBJS)
diff --git a/board/icu862/pcmcia.c b/board/icu862/pcmcia.c
new file mode 100644
index 0000000000..20f653ba2b
--- /dev/null
+++ b/board/icu862/pcmcia.c
@@ -0,0 +1,268 @@
+#include <common.h>
+#include <mpc8xx.h>
+#include <pcmcia.h>
+
+#undef	CONFIG_PCMCIA
+
+#if	(CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+#define	CONFIG_PCMCIA
+#endif
+
+#if	(CONFIG_COMMANDS & CFG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD)
+#define	CONFIG_PCMCIA
+#endif
+
+#ifdef	CONFIG_PCMCIA
+
+#define PCMCIA_BOARD_MSG "ICU862"
+
+static void cfg_port_B (void)
+{
+	volatile immap_t	*immap;
+	volatile cpm8xx_t	*cp;
+	uint reg;
+
+	immap = (immap_t *)CFG_IMMR;
+	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
+
+	/*
+	* Configure Port B for TPS2205 PC-Card Power-Interface Switch
+	*
+	* Switch off all voltages, assert shutdown
+	*/
+	reg  = cp->cp_pbdat;
+	reg |= (TPS2205_VPP_PGM | TPS2205_VPP_VCC |	/* VAVPP => Hi-Z */
+			TPS2205_VCC3    | TPS2205_VCC5    |	/* VAVCC => Hi-Z */
+			TPS2205_SHDN);				/* enable switch */
+	cp->cp_pbdat = reg;
+
+	cp->cp_pbpar &= ~(TPS2205_INPUTS | TPS2205_OUTPUTS);
+
+	reg = cp->cp_pbdir & ~(TPS2205_INPUTS);
+	cp->cp_pbdir = reg | TPS2205_OUTPUTS;
+
+	debug ("Set Port B: PAR: %08x DIR: %08x DAT: %08x\n",
+	       cp->cp_pbpar, cp->cp_pbdir, cp->cp_pbdat);
+}
+
+int pcmcia_hardware_enable(int slot)
+{
+	volatile immap_t	*immap;
+	volatile cpm8xx_t	*cp;
+	volatile pcmconf8xx_t	*pcmp;
+	volatile sysconf8xx_t	*sysp;
+	uint reg, pipr, mask;
+	int i;
+
+	debug ("hardware_enable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
+
+	udelay(10000);
+
+	immap = (immap_t *)CFG_IMMR;
+	sysp  = (sysconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_siu_conf));
+	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
+
+	/* Configure Port B for TPS2205 PC-Card Power-Interface Switch */
+	cfg_port_B ();
+
+	/*
+	* Configure SIUMCR to enable PCMCIA port B
+	* (VFLS[0:1] are not used for debugging, we connect FRZ# instead)
+	*/
+	sysp->sc_siumcr &= ~SIUMCR_DBGC11;	/* set DBGC to 00 */
+
+	/* clear interrupt state, and disable interrupts */
+	pcmp->pcmc_pscr =  PCMCIA_MASK(_slot_);
+	pcmp->pcmc_per &= ~PCMCIA_MASK(_slot_);
+
+	/*
+	* Disable interrupts, DMA, and PCMCIA buffers
+	* (isolate the interface) and assert RESET signal
+	*/
+	debug ("Disable PCMCIA buffers and assert RESET\n");
+	reg  = 0;
+	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX(_slot_) = reg;
+	udelay(500);
+
+	/*
+	* Make sure there is a card in the slot, then configure the interface.
+	*/
+	udelay(10000);
+	debug ("[%d] %s: PIPR(%p)=0x%x\n",
+	       __LINE__,__FUNCTION__,
+	       &(pcmp->pcmc_pipr),pcmp->pcmc_pipr);
+	if (pcmp->pcmc_pipr & (0x18000000 >> (slot << 4))) {
+		printf ("   No Card found\n");
+		return (1);
+	}
+
+	/*
+	* Power On: Set VAVCC to 3.3V or 5V, set VAVPP to Hi-Z
+	*/
+	mask = PCMCIA_VS1(slot) | PCMCIA_VS2(slot);
+	pipr = pcmp->pcmc_pipr;
+	debug ("PIPR: 0x%x ==> VS1=o%s, VS2=o%s\n",
+	       pipr,
+	       (reg&PCMCIA_VS1(slot))?"n":"ff",
+	       (reg&PCMCIA_VS2(slot))?"n":"ff");
+
+	reg  = cp->cp_pbdat;
+	if ((pipr & mask) == mask) {
+		reg |= (TPS2205_VPP_PGM | TPS2205_VPP_VCC |	/* VAVPP => Hi-Z */
+				TPS2205_VCC3);				/* 3V off	*/
+		reg &= ~(TPS2205_VCC5);				/* 5V on	*/
+		puts (" 5.0V card found: ");
+	} else {
+		reg |= (TPS2205_VPP_PGM | TPS2205_VPP_VCC |	/* VAVPP => Hi-Z */
+				TPS2205_VCC5);				/* 5V off	*/
+		reg &= ~(TPS2205_VCC3);				/* 3V on	*/
+		puts (" 3.3V card found: ");
+	}
+
+	debug ("\nPB DAT: %08x -> 3.3V %s 5.0V %s VPP_PGM %s VPP_VCC %s\n",
+	       reg,
+	       (reg & TPS2205_VCC3)    ? "off" : "on",
+	       (reg & TPS2205_VCC5)    ? "off" : "on",
+	       (reg & TPS2205_VPP_PGM) ? "off" : "on",
+	       (reg & TPS2205_VPP_VCC) ? "off" : "on" );
+
+	cp->cp_pbdat = reg;
+
+	/*  Wait 500 ms; use this to check for over-current */
+	for (i=0; i<5000; ++i) {
+		if ((cp->cp_pbdat & TPS2205_OC) == 0) {
+			printf ("   *** Overcurrent - Safety shutdown ***\n");
+			cp->cp_pbdat &= ~(TPS2205_SHDN);
+			return (1);
+		}
+		udelay (100);
+	}
+
+	debug ("Enable PCMCIA buffers and stop RESET\n");
+	reg  =  PCMCIA_PGCRX(_slot_);
+	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg &= ~__MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX(_slot_) = reg;
+
+	udelay(250000);	/* some cards need >150 ms to come up :-( */
+
+	debug ("# hardware_enable done\n");
+
+	return (0);
+}
+
+
+#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+int pcmcia_hardware_disable(int slot)
+{
+	volatile immap_t	*immap;
+	volatile cpm8xx_t	*cp;
+	volatile pcmconf8xx_t	*pcmp;
+	u_long reg;
+
+	debug ("hardware_disable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
+
+	immap = (immap_t *)CFG_IMMR;
+	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
+	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+
+	/* Shut down */
+	cp->cp_pbdat &= ~(TPS2205_SHDN);
+
+	/* Configure PCMCIA General Control Register */
+	debug ("Disable PCMCIA buffers and assert RESET\n");
+	reg  = 0;
+	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX(_slot_) = reg;
+
+	udelay(10000);
+
+	return (0);
+}
+#endif	/* CFG_CMD_PCMCIA */
+
+
+int pcmcia_voltage_set(int slot, int vcc, int vpp)
+{
+	volatile immap_t	*immap;
+	volatile cpm8xx_t	*cp;
+	volatile pcmconf8xx_t	*pcmp;
+	u_long reg;
+
+	debug ("voltage_set: "
+			PCMCIA_BOARD_MSG
+			" Slot %c, Vcc=%d.%d, Vpp=%d.%d\n",
+	'A'+slot, vcc/10, vcc%10, vpp/10, vcc%10);
+
+	immap = (immap_t *)CFG_IMMR;
+	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
+	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+	/*
+	* Disable PCMCIA buffers (isolate the interface)
+	* and assert RESET signal
+	*/
+	debug ("Disable PCMCIA buffers and assert RESET\n");
+	reg  = PCMCIA_PGCRX(_slot_);
+	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX(_slot_) = reg;
+	udelay(500);
+
+	/*
+	* Configure Port C pins for
+	* 5 Volts Enable and 3 Volts enable,
+	* Turn all power pins to Hi-Z
+	*/
+	debug ("PCMCIA power OFF\n");
+	cfg_port_B ();	/* Enables switch, but all in Hi-Z */
+
+	reg  = cp->cp_pbdat;
+
+	switch(vcc) {
+		case  0: 			break;	/* Switch off		*/
+		case 33: reg &= ~TPS2205_VCC3;	break;	/* Switch on 3.3V	*/
+		case 50: reg &= ~TPS2205_VCC5;	break;	/* Switch on 5.0V	*/
+		default: 			goto done;
+	}
+
+	/* Checking supported voltages */
+
+	debug ("PIPR: 0x%x --> %s\n",
+	       pcmp->pcmc_pipr,
+	       (pcmp->pcmc_pipr & 0x00008000) ? "only 5 V" : "can do 3.3V");
+
+	cp->cp_pbdat = reg;
+
+#ifdef DEBUG
+{
+	char *s;
+
+	if ((reg & TPS2205_VCC3) == 0) {
+		s = "at 3.3V";
+	} else if ((reg & TPS2205_VCC5) == 0) {
+		s = "at 5.0V";
+	} else {
+		s = "down";
+	}
+	printf ("PCMCIA powered %s\n", s);
+}
+#endif
+
+done:
+	debug ("Enable PCMCIA buffers and stop RESET\n");
+	reg  =  PCMCIA_PGCRX(_slot_);
+	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg &= ~__MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX(_slot_) = reg;
+	udelay(500);
+
+	debug ("voltage_set: " PCMCIA_BOARD_MSG " Slot %c, DONE\n",
+	       slot+'A');
+	return (0);
+}
+
+#endif	/* CONFIG_PCMCIA */
diff --git a/board/kup/common/pcmcia.c b/board/kup/common/pcmcia.c
new file mode 100644
index 0000000000..1f61a0ecd1
--- /dev/null
+++ b/board/kup/common/pcmcia.c
@@ -0,0 +1,225 @@
+#include <common.h>
+#include <mpc8xx.h>
+#include <pcmcia.h>
+
+#undef	CONFIG_PCMCIA
+
+#if	(CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+#define	CONFIG_PCMCIA
+#endif
+
+#if	(CONFIG_COMMANDS & CFG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD)
+#define	CONFIG_PCMCIA
+#endif
+
+#ifdef	CONFIG_PCMCIA
+
+#define PCMCIA_BOARD_MSG "KUP"
+
+#define KUP4K_PCMCIA_B_3V3 (0x00020000)
+
+int pcmcia_hardware_enable(int slot)
+{
+	volatile immap_t	*immap;
+	volatile cpm8xx_t	*cp;
+	volatile pcmconf8xx_t	*pcmp;
+	volatile sysconf8xx_t	*sysp;
+	uint reg, mask;
+
+	debug ("hardware_enable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
+
+	udelay(10000);
+
+	immap = (immap_t *)CFG_IMMR;
+	sysp  = (sysconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_siu_conf));
+	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
+
+	/*
+	* Configure SIUMCR to enable PCMCIA port B
+	* (VFLS[0:1] are not used for debugging, we connect FRZ# instead)
+	*/
+	sysp->sc_siumcr &= ~SIUMCR_DBGC11;	/* set DBGC to 00 */
+
+	/* clear interrupt state, and disable interrupts */
+	pcmp->pcmc_pscr =  PCMCIA_MASK(slot);
+	pcmp->pcmc_per &= ~PCMCIA_MASK(slot);
+
+	/*
+	* Disable interrupts, DMA, and PCMCIA buffers
+	* (isolate the interface) and assert RESET signal
+	*/
+	debug ("Disable PCMCIA buffers and assert RESET\n");
+	reg  = 0;
+	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX(slot) = reg;
+	udelay(2500);
+
+	/*
+	* Configure Port B pins for
+	* 3 Volts enable
+	*/
+	if (slot) { /* Slot A is built-in */
+		cp->cp_pbdir |=  KUP4K_PCMCIA_B_3V3;
+		cp->cp_pbpar &= ~KUP4K_PCMCIA_B_3V3;
+		/* remove all power */
+		cp->cp_pbdat |=  KUP4K_PCMCIA_B_3V3; /* active low */
+	}
+	/*
+	* Make sure there is a card in the slot, then configure the interface.
+	*/
+	udelay(10000);
+	debug ("[%d] %s: PIPR(%p)=0x%x\n",
+	       __LINE__,__FUNCTION__,
+	       &(pcmp->pcmc_pipr),pcmp->pcmc_pipr);
+	if (pcmp->pcmc_pipr & (0x18000000 >> (slot << 4))) {
+		printf ("   No Card found\n");
+		return (1);
+	}
+
+	/*
+	* Power On.
+	*/
+	printf("%s  Slot %c:", slot ? "" : "\n", 'A' + slot);
+	mask = PCMCIA_VS1(slot) | PCMCIA_VS2(slot);
+	reg  = pcmp->pcmc_pipr;
+	debug ("PIPR: 0x%x ==> VS1=o%s, VS2=o%s\n",
+	       reg,
+	       (reg&PCMCIA_VS1(slot))?"n":"ff",
+	       (reg&PCMCIA_VS2(slot))?"n":"ff");
+	if ((reg & mask) == mask) {
+		puts (" 5.0V card found: NOT SUPPORTED !!!\n");
+	} else {
+		if(slot)
+			cp->cp_pbdat &= ~KUP4K_PCMCIA_B_3V3;
+		puts (" 3.3V card found: ");
+	}
+#if 0
+	/*  VCC switch error flag, PCMCIA slot INPACK_ pin */
+	cp->cp_pbdir &= ~(0x0020 | 0x0010);
+	cp->cp_pbpar &= ~(0x0020 | 0x0010);
+	udelay(500000);
+#endif
+	debug ("Enable PCMCIA buffers and stop RESET\n");
+	reg  =  PCMCIA_PGCRX(slot);
+	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg &= ~__MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX(slot) = reg;
+
+	udelay(250000);	/* some cards need >150 ms to come up :-( */
+
+	debug ("# hardware_enable done\n");
+
+	return (0);
+}
+
+
+#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+int pcmcia_hardware_disable(int slot)
+{
+	volatile immap_t	*immap;
+	volatile cpm8xx_t	*cp;
+	volatile pcmconf8xx_t	*pcmp;
+	u_long reg;
+
+	debug ("hardware_disable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
+
+	immap = (immap_t *)CFG_IMMR;
+	pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
+
+	/* remove all power */
+	if (slot)
+		cp->cp_pbdat |= KUP4K_PCMCIA_B_3V3;
+
+	/* Configure PCMCIA General Control Register */
+	debug ("Disable PCMCIA buffers and assert RESET\n");
+	reg  = 0;
+	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX(slot) = reg;
+
+	udelay(10000);
+
+	return (0);
+}
+#endif	/* CFG_CMD_PCMCIA */
+
+
+int pcmcia_voltage_set(int slot, int vcc, int vpp)
+{
+	volatile immap_t	*immap;
+	volatile cpm8xx_t	*cp;
+	volatile pcmconf8xx_t	*pcmp;
+	u_long reg;
+
+	debug ("voltage_set: "	\
+			PCMCIA_BOARD_MSG	\
+			" Slot %c, Vcc=%d.%d, Vpp=%d.%d\n",
+	'A'+slot, vcc/10, vcc%10, vpp/10, vcc%10);
+
+	if (!slot) /* Slot A is not configurable */
+		return 0;
+
+	immap = (immap_t *)CFG_IMMR;
+	pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
+
+	/*
+	* Disable PCMCIA buffers (isolate the interface)
+	* and assert RESET signal
+	*/
+	debug ("Disable PCMCIA buffers and assert RESET\n");
+	reg  = PCMCIA_PGCRX(slot);
+	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX(slot) = reg;
+	udelay(500);
+
+	debug ("PCMCIA power OFF\n");
+	/*
+	* Configure Port B pins for
+	* 3 Volts enable
+	*/
+	cp->cp_pbdir |=  KUP4K_PCMCIA_B_3V3;
+	cp->cp_pbpar &= ~KUP4K_PCMCIA_B_3V3;
+	/* remove all power */
+	cp->cp_pbdat |=  KUP4K_PCMCIA_B_3V3; /* active low */
+
+	switch(vcc) {
+		case  0: 		break;
+		case 33:
+			cp->cp_pbdat &= ~KUP4K_PCMCIA_B_3V3;
+			debug ("PCMCIA powered at 3.3V\n");
+			break;
+		case 50:
+			debug ("PCMCIA: 5Volt vcc not supported\n");
+			break;
+		default:
+			puts("PCMCIA: vcc not supported");
+			break;
+	}
+	udelay(10000);
+	/* Checking supported voltages */
+
+	debug ("PIPR: 0x%x --> %s\n",
+	       pcmp->pcmc_pipr,
+	       (pcmp->pcmc_pipr & (0x80000000 >> (slot << 4)))
+			       ? "only 5 V --> NOT SUPPORTED"
+	: "can do 3.3V");
+
+
+	debug ("Enable PCMCIA buffers and stop RESET\n");
+	reg  =  PCMCIA_PGCRX(slot);
+	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg &= ~__MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX(slot) = reg;
+	udelay(500);
+
+	debug ("voltage_set: " PCMCIA_BOARD_MSG " Slot %c, DONE\n",
+	       slot+'A');
+	return (0);
+}
+
+#endif	/* CONFIG_PCMCIA */
diff --git a/board/kup/kup4k/Makefile b/board/kup/kup4k/Makefile
index 62d289b436..4a3954c389 100644
--- a/board/kup/kup4k/Makefile
+++ b/board/kup/kup4k/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= lib$(BOARD).a
 
-OBJS	= $(BOARD).o ../common/flash.o ../common/kup.o ../common/load_sernum_ethaddr.o
+OBJS	= $(BOARD).o ../common/flash.o ../common/kup.o ../common/load_sernum_ethaddr.o ../common/pcmcia.o
 
 $(LIB):	.depend $(OBJS)
 	$(AR) crv $@ $(OBJS)
diff --git a/board/kup/kup4x/Makefile b/board/kup/kup4x/Makefile
index 62d289b436..4a3954c389 100644
--- a/board/kup/kup4x/Makefile
+++ b/board/kup/kup4x/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= lib$(BOARD).a
 
-OBJS	= $(BOARD).o ../common/flash.o ../common/kup.o ../common/load_sernum_ethaddr.o
+OBJS	= $(BOARD).o ../common/flash.o ../common/kup.o ../common/load_sernum_ethaddr.o ../common/pcmcia.o
 
 $(LIB):	.depend $(OBJS)
 	$(AR) crv $@ $(OBJS)
diff --git a/board/lwmon/Makefile b/board/lwmon/Makefile
index 7a2014d466..7b2b545820 100644
--- a/board/lwmon/Makefile
+++ b/board/lwmon/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= lib$(BOARD).a
 
-OBJS	= $(BOARD).o flash.o
+OBJS	= $(BOARD).o flash.o pcmcia.o
 
 $(LIB):	.depend $(OBJS)
 	$(AR) crv $@ $(OBJS)
diff --git a/board/lwmon/pcmcia.c b/board/lwmon/pcmcia.c
new file mode 100644
index 0000000000..2349286bb2
--- /dev/null
+++ b/board/lwmon/pcmcia.c
@@ -0,0 +1,240 @@
+#include <common.h>
+#include <mpc8xx.h>
+#include <pcmcia.h>
+#include <i2c.h>
+
+#undef	CONFIG_PCMCIA
+
+#if	(CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+#define	CONFIG_PCMCIA
+#endif
+
+#if	(CONFIG_COMMANDS & CFG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD)
+#define	CONFIG_PCMCIA
+#endif
+
+#ifdef	CONFIG_PCMCIA
+
+#define PCMCIA_BOARD_MSG "LWMON"
+
+/* #define's for MAX1604 Power Switch */
+#define MAX1604_OP_SUS		0x80
+#define MAX1604_VCCBON		0x40
+#define MAX1604_VCC_35		0x20
+#define MAX1604_VCCBHIZ		0x10
+#define MAX1604_VPPBON		0x08
+#define MAX1604_VPPBPBPGM	0x04
+#define MAX1604_VPPBHIZ		0x02
+/* reserved			0x01	*/
+
+int pcmcia_hardware_enable(int slot)
+{
+	volatile immap_t	*immap;
+	volatile cpm8xx_t	*cp;
+	volatile pcmconf8xx_t	*pcmp;
+	volatile sysconf8xx_t	*sysp;
+	uint reg, mask;
+	uchar val;
+
+
+	debug ("hardware_enable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
+
+	/* Switch on PCMCIA port in PIC register 0x60 */
+	reg = pic_read  (0x60);
+	debug ("[%d] PIC read: reg_60 = 0x%02x\n", __LINE__, reg);
+	reg &= ~0x10;
+	/* reg |= 0x08; Vpp not needed */
+	pic_write (0x60, reg);
+#ifdef DEBUG
+	reg = pic_read  (0x60);
+	printf ("[%d] PIC read: reg_60 = 0x%02x\n", __LINE__, reg);
+#endif
+	udelay(10000);
+
+	immap = (immap_t *)CFG_IMMR;
+	sysp  = (sysconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_siu_conf));
+	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
+
+	/*
+	 * Configure SIUMCR to enable PCMCIA port B
+	 * (VFLS[0:1] are not used for debugging, we connect FRZ# instead)
+	 */
+	sysp->sc_siumcr &= ~SIUMCR_DBGC11;	/* set DBGC to 00 */
+
+	/* clear interrupt state, and disable interrupts */
+	pcmp->pcmc_pscr =  PCMCIA_MASK(_slot_);
+	pcmp->pcmc_per &= ~PCMCIA_MASK(_slot_);
+
+	/*
+	 * Disable interrupts, DMA, and PCMCIA buffers
+	 * (isolate the interface) and assert RESET signal
+	 */
+	debug ("Disable PCMCIA buffers and assert RESET\n");
+	reg  = 0;
+	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX(_slot_) = reg;
+	udelay(500);
+
+	/*
+	 * Make sure there is a card in the slot, then configure the interface.
+	 */
+	udelay(10000);
+	debug ("[%d] %s: PIPR(%p)=0x%x\n",
+		__LINE__,__FUNCTION__,
+		&(pcmp->pcmc_pipr),pcmp->pcmc_pipr);
+	if (pcmp->pcmc_pipr & (0x18000000 >> (slot << 4))) {
+		printf ("   No Card found\n");
+		return (1);
+	}
+
+	/*
+	 * Power On.
+	 */
+	mask = PCMCIA_VS1(slot) | PCMCIA_VS2(slot);
+	reg  = pcmp->pcmc_pipr;
+	debug ("PIPR: 0x%x ==> VS1=o%s, VS2=o%s\n",
+		reg,
+		(reg&PCMCIA_VS1(slot))?"n":"ff",
+		(reg&PCMCIA_VS2(slot))?"n":"ff");
+	if ((reg & mask) == mask) {
+		val = 0;		/* VCCB3/5 = 0 ==> use Vx = 5.0 V */
+		puts (" 5.0V card found: ");
+	} else {
+		val = MAX1604_VCC_35;	/* VCCB3/5 = 1 ==> use Vy = 3.3 V */
+		puts (" 3.3V card found: ");
+	}
+
+	/*  switch VCC on */
+	val |= MAX1604_OP_SUS | MAX1604_VCCBON;
+	i2c_init  (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+	i2c_write (CFG_I2C_POWER_A_ADDR, 0, 0, &val, 1);
+
+	udelay(500000);
+
+	debug ("Enable PCMCIA buffers and stop RESET\n");
+	reg  =  PCMCIA_PGCRX(_slot_);
+	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg &= ~__MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX(_slot_) = reg;
+
+	udelay(250000);	/* some cards need >150 ms to come up :-( */
+
+	debug ("# hardware_enable done\n");
+
+	return (0);
+}
+
+
+#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+int pcmcia_hardware_disable(int slot)
+{
+	volatile immap_t	*immap;
+	volatile pcmconf8xx_t	*pcmp;
+	u_long reg;
+	uchar val;
+
+	debug ("hardware_disable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
+
+	immap = (immap_t *)CFG_IMMR;
+	pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+
+	/* remove all power, put output in high impedance state */
+	val  = MAX1604_VCCBHIZ | MAX1604_VPPBHIZ;
+	i2c_init  (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+	i2c_write (CFG_I2C_POWER_A_ADDR, 0, 0, &val, 1);
+
+	/* Configure PCMCIA General Control Register */
+	debug ("Disable PCMCIA buffers and assert RESET\n");
+	reg  = 0;
+	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX(_slot_) = reg;
+
+	/* Switch off PCMCIA port in PIC register 0x60 */
+	reg = pic_read  (0x60);
+	debug ("[%d] PIC read: reg_60 = 0x%02x\n", __LINE__, reg);
+	reg |=  0x10;
+	reg &= ~0x08;
+	pic_write (0x60, reg);
+#ifdef DEBUG
+	reg = pic_read  (0x60);
+	printf ("[%d] PIC read: reg_60 = 0x%02x\n", __LINE__, reg);
+#endif
+	udelay(10000);
+
+	return (0);
+}
+#endif	/* CFG_CMD_PCMCIA */
+
+
+int pcmcia_voltage_set(int slot, int vcc, int vpp)
+{
+	volatile immap_t	*immap;
+	volatile pcmconf8xx_t	*pcmp;
+	u_long reg;
+	uchar val;
+
+	debug ("voltage_set: "
+		PCMCIA_BOARD_MSG
+		" Slot %c, Vcc=%d.%d, Vpp=%d.%d\n",
+		'A'+slot, vcc/10, vcc%10, vpp/10, vcc%10);
+
+	immap = (immap_t *)CFG_IMMR;
+	pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+	/*
+	 * Disable PCMCIA buffers (isolate the interface)
+	 * and assert RESET signal
+	 */
+	debug ("Disable PCMCIA buffers and assert RESET\n");
+	reg  = PCMCIA_PGCRX(_slot_);
+	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX(_slot_) = reg;
+	udelay(500);
+
+	/*
+	 * Turn off all power (switch to high impedance)
+	 */
+	debug ("PCMCIA power OFF\n");
+	val  = MAX1604_VCCBHIZ | MAX1604_VPPBHIZ;
+	i2c_init  (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+	i2c_write (CFG_I2C_POWER_A_ADDR, 0, 0, &val, 1);
+
+	val = 0;
+	switch(vcc) {
+	case  0: 			break;
+	case 33: val = MAX1604_VCC_35;	break;
+	case 50: 			break;
+	default: 			goto done;
+	}
+
+	/* Checking supported voltages */
+
+	debug ("PIPR: 0x%x --> %s\n",
+		pcmp->pcmc_pipr,
+		(pcmp->pcmc_pipr & 0x00008000) ? "only 5 V" : "can do 3.3V");
+
+	i2c_write (CFG_I2C_POWER_A_ADDR, 0, 0, &val, 1);
+	if (val) {
+		debug ("PCMCIA powered at %sV\n",
+			(val & MAX1604_VCC_35) ? "3.3" : "5.0");
+	} else {
+		debug ("PCMCIA powered down\n");
+	}
+
+done:
+	debug ("Enable PCMCIA buffers and stop RESET\n");
+	reg  =  PCMCIA_PGCRX(_slot_);
+	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg &= ~__MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX(_slot_) = reg;
+	udelay(500);
+
+	debug ("voltage_set: " PCMCIA_BOARD_MSG " Slot %c, DONE\n",
+		slot+'A');
+	return (0);
+}
+
+#endif	/* CONFIG_PCMCIA */
diff --git a/board/mbx8xx/Makefile b/board/mbx8xx/Makefile
index 3e8376cc0d..e4d10994ed 100644
--- a/board/mbx8xx/Makefile
+++ b/board/mbx8xx/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= lib$(BOARD).a
 
-OBJS	= $(BOARD).o flash.o vpd.o
+OBJS	= $(BOARD).o flash.o vpd.o pcmcia.o
 
 $(LIB):	.depend $(OBJS)
 	$(AR) crv $@ $(OBJS)
diff --git a/board/mbx8xx/pcmcia.c b/board/mbx8xx/pcmcia.c
new file mode 100644
index 0000000000..132a68806d
--- /dev/null
+++ b/board/mbx8xx/pcmcia.c
@@ -0,0 +1,166 @@
+#include <common.h>
+#include <mpc8xx.h>
+#include <pcmcia.h>
+
+#include "csr.h"
+
+#undef	CONFIG_PCMCIA
+
+#if	(CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+#define	CONFIG_PCMCIA
+#endif
+
+#if	(CONFIG_COMMANDS & CFG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD)
+#define	CONFIG_PCMCIA
+#endif
+
+#ifdef	CONFIG_PCMCIA
+
+/* A lot of this has been taken from the RPX code in this file it works from me.
+   I have added the voltage selection for the MBX board. */
+
+/* MBX voltage bit in control register #2 */
+#define CR2_VPP12       ((uchar)0x10)
+#define CR2_VPPVDD      ((uchar)0x20)
+#define CR2_VDD5        ((uchar)0x40)
+#define CR2_VDD3        ((uchar)0x80)
+
+#define PCMCIA_BOARD_MSG "MBX860"
+
+int pcmcia_voltage_set (int slot, int vcc, int vpp)
+{
+	uchar reg = 0;
+
+	debug ("voltage_set: PCMCIA_BOARD_MSG Slot %c, Vcc=%d.%d, Vpp=%d.%d\n",
+	       'A' + slot, vcc / 10, vcc % 10, vpp / 10, vcc % 10);
+
+	switch (vcc) {
+		case 0:
+			break;
+		case 33:
+			reg |= CR2_VDD3;
+			break;
+		case 50:
+			reg |= CR2_VDD5;
+			break;
+		default:
+			return 1;
+	}
+
+	switch (vpp) {
+		case 0:
+			break;
+		case 33:
+		case 50:
+			if (vcc == vpp) {
+				reg |= CR2_VPPVDD;
+			} else {
+				return 1;
+			}
+			break;
+		case 120:
+			reg |= CR2_VPP12;
+			break;
+		default:
+			return 1;
+	}
+
+	/* first, turn off all power */
+	MBX_CSR2 &= ~(CR2_VDDSEL | CR2_VPPSEL);
+
+	/* enable new powersettings */
+	MBX_CSR2 |= reg;
+	debug ("MBX_CSR2 read = 0x%02x\n", MBX_CSR2);
+
+	return (0);
+}
+
+int pcmcia_hardware_enable (int slot)
+{
+	volatile immap_t *immap;
+	volatile cpm8xx_t *cp;
+	volatile pcmconf8xx_t *pcmp;
+	volatile sysconf8xx_t *sysp;
+	uint reg, mask;
+
+	debug ("hardware_enable: " PCMCIA_BOARD_MSG " Slot %c\n",
+	       'A' + slot);
+
+	udelay (10000);
+
+	immap = (immap_t *) CFG_IMMR;
+	sysp = (sysconf8xx_t *) (&(((immap_t *) CFG_IMMR)->im_siu_conf));
+	pcmp = (pcmconf8xx_t *) (&(((immap_t *) CFG_IMMR)->im_pcmcia));
+	cp = (cpm8xx_t *) (&(((immap_t *) CFG_IMMR)->im_cpm));
+
+	/* clear interrupt state, and disable interrupts */
+	pcmp->pcmc_pscr = PCMCIA_MASK (_slot_);
+	pcmp->pcmc_per &= ~PCMCIA_MASK (_slot_);
+
+	/*
+	* Disable interrupts, DMA, and PCMCIA buffers
+	* (isolate the interface) and assert RESET signal
+	*/
+	debug ("Disable PCMCIA buffers and assert RESET\n");
+	reg = 0;
+	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg |= __MY_PCMCIA_GCRX_CXOE;	/* active low  */
+	PCMCIA_PGCRX (_slot_) = reg;
+	udelay (500);
+
+	/* remove all power */
+	pcmcia_voltage_set (slot, 0, 0);
+	/*
+	* Make sure there is a card in the slot, then configure the interface.
+	*/
+	udelay(10000);
+	debug ("[%d] %s: PIPR(%p)=0x%x\n",
+	       __LINE__,__FUNCTION__,
+	       &(pcmp->pcmc_pipr),pcmp->pcmc_pipr);
+#ifndef CONFIG_HMI10
+	if (pcmp->pcmc_pipr & (0x18000000 >> (slot << 4))) {
+#else
+	if (pcmp->pcmc_pipr & (0x10000000 >> (slot << 4))) {
+#endif	/* CONFIG_HMI10 */
+		printf ("   No Card found\n");
+		return (1);
+	}
+
+	/*
+	* Power On.
+	*/
+	mask = PCMCIA_VS1 (_slot_) | PCMCIA_VS2 (_slot_);
+	reg = pcmp->pcmc_pipr;
+	debug ("PIPR: 0x%x ==> VS1=o%s, VS2=o%s\n", reg,
+	       (reg & PCMCIA_VS1 (slot)) ? "n" : "ff",
+	       (reg & PCMCIA_VS2 (slot)) ? "n" : "ff");
+
+	if ((reg & mask) == mask) {
+		pcmcia_voltage_set (_slot_, 50, 0);
+		printf (" 5.0V card found: ");
+	} else {
+		pcmcia_voltage_set (_slot_, 33, 0);
+		printf (" 3.3V card found: ");
+	}
+
+	debug ("Enable PCMCIA buffers and stop RESET\n");
+	reg = PCMCIA_PGCRX (_slot_);
+	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg &= ~__MY_PCMCIA_GCRX_CXOE;	/* active low  */
+	PCMCIA_PGCRX (_slot_) = reg;
+
+	udelay (250000);	/* some cards need >150 ms to come up :-( */
+
+	debug ("# hardware_enable done\n");
+
+	return (0);
+	}
+
+#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+int pcmcia_hardware_disable (int slot)
+{
+	return 0;	/* No hardware to disable */
+}
+#endif /* CFG_CMD_PCMCIA */
+
+#endif	/* CONFIG_PCMCIA */
diff --git a/board/mcc200/config.mk b/board/mcc200/config.mk
index fa55673adf..a8225598cc 100644
--- a/board/mcc200/config.mk
+++ b/board/mcc200/config.mk
@@ -26,16 +26,18 @@
 #
 #	Valid values for TEXT_BASE are:
 #
-#	0xFFF00000   boot high (standard configuration)
-#	0xFE000000   boot low
+#	0xFC000000   boot low (standard configuration)
+#	0xFFF00000   boot high
 #	0x00100000   boot from RAM (for testing only)
 #
 
 sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp
 
 ifndef TEXT_BASE
-## Standard: boot high
-TEXT_BASE = 0xFFF00000
+## Standard: boot low
+TEXT_BASE = 0xFC000000
+## Boot high
+# TEXT_BASE = 0xFFF00000
 ## For testing: boot from RAM
 # TEXT_BASE = 0x00100000
 endif
diff --git a/board/mcc200/mcc200.c b/board/mcc200/mcc200.c
index 5fe239f234..167dc0f846 100644
--- a/board/mcc200/mcc200.c
+++ b/board/mcc200/mcc200.c
@@ -28,7 +28,16 @@
 #include <mpc5xxx.h>
 #include <pci.h>
 
-#include "mt48lc8m32b2-6-7.h"
+/* Two MT48LC8M32B2 for 32 MB */
+/* #include "mt48lc8m32b2-6-7.h" */
+
+/* One MT48LC16M32S2 for 64 MB */
+/* #include "mt48lc16m32s2-75.h" */
+#if defined (CONFIG_MCC200_SDRAM)
+#include "mt48lc16m16a2-75.h"
+#else
+#include "mt46v16m16-75.h"
+#endif
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -74,6 +83,8 @@ static void sdram_start (int hi_addr)
 	/* normal operation */
 	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit;
 	__asm__ volatile ("sync");
+
+	udelay(10);
 }
 #endif
 
@@ -242,8 +253,8 @@ int misc_init_r (void)
 		/* Unprotect the upper bank of the Flash */
 		*(volatile int*)MPC5XXX_CS0_CFG |= (1 << 6);
 		flash_protect (FLAG_PROTECT_CLEAR,
-			       flash_info[0].start[0],
-			       (flash_info[0].start[0] + flash_info[0].size) / 2 - 1,
+			       flash_info[0].start[0] + flash_info[0].size / 2,
+			       (flash_info[0].start[0] - 1) + flash_info[0].size,
 			       &flash_info[0]);
 		*(volatile int*)MPC5XXX_CS0_CFG &= ~(1 << 6);
 	}
diff --git a/board/mcc200/mt48lc16m32s2-75.h b/board/mcc200/mt48lc16m32s2-75.h
new file mode 100644
index 0000000000..ffdf0396a5
--- /dev/null
+++ b/board/mcc200/mt48lc16m32s2-75.h
@@ -0,0 +1,43 @@
+/*
+ * (C) Copyright 2004
+ * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#define SDRAM_DDR	0		/* is SDR */
+
+#if defined(CONFIG_MPC5200)
+/* Settings for XLB = 132 MHz */
+#define SDRAM_MODE	0x00CD0000
+#define SDRAM_CONTROL	0x504F0000
+#define SDRAM_CONFIG1	0xD2322800
+#define SDRAM_CONFIG2	0x8AD70000
+
+#elif defined(CONFIG_MGT5100)
+/* Settings for XLB = 66 MHz */
+#define SDRAM_MODE	0x008D0000
+#define SDRAM_CONTROL	0x504F0000
+#define SDRAM_CONFIG1	0xC2222600
+#define SDRAM_CONFIG2	0x88B70004
+#define SDRAM_ADDRSEL	0x02000000
+
+#else
+#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined
+#endif
diff --git a/board/netstar/crcek.S b/board/netstar/crcek.S
index 6ca4d11df8..a74abf9a09 100644
--- a/board/netstar/crcek.S
+++ b/board/netstar/crcek.S
@@ -13,6 +13,7 @@
  *	u32 - crc32
  */
 
+#include <config.h>
 #include "crcek.h"
 
 /**
@@ -39,7 +40,7 @@
 	.macro crcuj, offset, size
 	mov	r0, #0
 	ldr	r1, \offset
-	ldr	r2, [r1]
+	ldr	r2, [r1], #4
 	cmp	r2, r0		@ no data, no problem
 	beq	2f
 	tst	r2, #3		@ unaligned size
@@ -47,7 +48,6 @@
 	ldr	r3, \size
 	cmp	r2, r3		@ bogus size
 	bhi	2f
-	add	r1, r1, #4
 	do_crc32
 	ldr	r1, [r1]
 2:
@@ -55,16 +55,71 @@
 	.endm
 
 	.macro wait, reg
-	mov	\reg, #0x1000
+	mov	\reg, #0x100000
 3:
 	subs	\reg, \reg, #0x1
 	bne 	3b
-
 	.endm
+
 .text
 .globl crcek
 crcek:
-	b	crc2_bad
+	/* Enable I-cache */
+	mrc	p15, 0, r1, c0, c0, 0		@ read C15 ID register
+	mrc	p15, 0, r1, c0, c0, 1		@ read C15 Cache information register
+	mrc	p15, 0, r1, c1, c0, 0		@ read C15 Control register
+	orr	r1, r1, #0x1000			@ enable I-cache, map interrupt vector 0xffff0000
+	mcr	p15, 0, r1, c1, c0, 0		@ write C15 Control register
+	mov	r1, #0x00
+	mcr	p15, 0, r1, c7, c5, 0		@ Flush I-cache
+	nop
+	nop
+	nop
+	nop
+
+	/* Setup clocking mode */
+	ldr	r0, MPU_CLKM_BASE		@ base of CLOCK unit
+	ldrh	r1, [r0, #0x18]			@ ARM_SYST - get reset status
+	bic	r1, r1, #(7 << 11)		@ clear clock select
+	orr	r1, r1, #(2 << 11)		@ set synchronous scalable
+	mov	r2, #0
+loop:
+	cmp	r2, #1				@ this loop will wait for at least 100 cycles
+	streqh	r1, [r0, #0x18]			@ before issuing next request from MPU
+	add	r2, r2, #1			@ on the 1st run code is loaded into I-cache
+	cmp	r2, #16				@ and second run will set clocking mode
+	bne	loop
+	nop
+
+	/* Setup clock dividers */
+	ldr	r1, CKCTL_VAL
+	orr	r1, r1, #0x2000			@ enable DSP clock
+	strh	r1, [r0]			@ setup clock divisors
+
+	/* Setup DPLL to generate requested freq */
+	ldr	r0, DPLL1_BASE			@ base of DPLL1 register
+	mov	r1, #0x0010			@ set PLL_ENABLE
+	orr	r1, r1, #0x2000			@ set IOB to new locking
+	orr	r1, r1, #(OMAP5910_DPLL_MUL << 7) @ setup multiplier CLKREF
+	orr	r1, r1, #(OMAP5910_DPLL_DIV << 5) @ setup divider CLKREF
+	strh	r1, [r0]			@ write
+
+locking:
+	ldrh	r1, [r0]			@ get DPLL value
+	tst	r1, #0x01
+	beq	locking				@ while LOCK not set
+
+	/* Enable clock */
+	ldr	r0, MPU_CLKM_BASE		@ base of CLOCK unit
+	mov	r1, #(1 << 10)			@ disable idle mode do not check
+						@ nWAKEUP pin, other remain active
+	strh	r1, [r0, #0x04]
+	ldr	r1, EN_CLK_VAL
+	strh	r1, [r0, #0x08]
+	mov	r1, #0x003f			@ FLASH.RP not enabled in idle and
+	strh	r1, [r0, #0x0c]			@ max delayed ( 32 x CLKIN )
+
+
 	mov	r6, #0
 	crcuj	_LOADER1_OFFSET, _LOADER_SIZE
 	bne	crc1_bad
@@ -76,9 +131,8 @@ crc1_bad:
 crc2_bad:
 	ldr	r3, _LOADER1_OFFSET
 	ldr	r4, _LOADER2_OFFSET
-	b	boot_2nd
-	tst	r6, #3
-	beq	one_is_bad	@ one of them (or both) has bad crc
+	teq	r6, #3
+	bne	one_is_bad	@ one of them (or both) has bad crc
 	ldr	r1, [r3, #4]
 	ldr	r2, [r4, #4]
 	cmp	r1, r2		@ boot 2nd loader if versions differ
@@ -90,6 +144,7 @@ one_is_bad:
 	tst	r6, #2
 	bne	boot_2nd
 @ We are doomed, so let user know.
+hell:
 	ldr	r0, GPIO_BASE	@ configure GPIO pins
 	ldr	r1, GPIO_DIRECTION
 	strh	r1, [r0, #0x08]
@@ -171,6 +226,15 @@ CRC32_TABLE:
 
 GPIO_BASE:
 	.word 0xfffce000
+MPU_CLKM_BASE:
+	.word 0xfffece00
+DPLL1_BASE:
+	.word 0xfffecf00
+
+CKCTL_VAL:
+	.word OMAP5910_ARM_CKCTL
+EN_CLK_VAL:
+	.word OMAP5910_ARM_EN_CLK
 GPIO_DIRECTION:
 	.word 0x0000ffe7
 
diff --git a/board/netstar/crcit b/board/netstar/crcit
index 98ae42e03b..203645d039 100755
--- a/board/netstar/crcit
+++ b/board/netstar/crcit
diff --git a/board/netstar/crcit.c b/board/netstar/crcit.c
index f6d3066c15..ce98e20267 100644
--- a/board/netstar/crcit.c
+++ b/board/netstar/crcit.c
@@ -77,7 +77,7 @@ int main(int argc, char **argv)
 	} else if ((argc == 4) && (strcmp(argv[1], "-v") == 0)) {
 		char *endptr, *nptr = argv[2];
 		unsigned ver = strtoul(nptr, &endptr, 0);
-		if (nptr != '\0' && endptr == '\0')
+		if (*nptr != '\0' && *endptr == '\0')
 			return doit(argv[3], ver);
 	}
 	fprintf(stderr, "Usage: crcit [-v version] <image>\n");
diff --git a/board/netstar/netstar.c b/board/netstar/netstar.c
index 4b7eba125e..d6b620c8ce 100644
--- a/board/netstar/netstar.c
+++ b/board/netstar/netstar.c
@@ -27,7 +27,6 @@ DECLARE_GLOBAL_DATA_PTR;
 int board_init(void)
 {
 	/* arch number of NetStar board */
-	/* TODO: use define from asm/mach-types.h */
 	gd->bd->bi_arch_number = 692;
 
 	/* adress of boot parameters */
@@ -51,15 +50,11 @@ int dram_init(void)
 	return 0;
 }
 
-extern void partition_flash(void);
-
 int misc_init_r(void)
 {
 	return 0;
 }
 
-extern void nand_init(void);
-
 int board_late_init(void)
 {
 	return 0;
diff --git a/board/netstar/setup.S b/board/netstar/setup.S
index f67786d182..5dacc9cc45 100644
--- a/board/netstar/setup.S
+++ b/board/netstar/setup.S
@@ -145,25 +145,23 @@ lowlevel_init:
 	nop
 
 	/* Setup clocking mode */
-	ldr	r0, OMAP5910_MPU_CLKM_BASE	@ prepare base of CLOCK unit
-	ldrh	r1, [r0, #0x18]			@ get reset status
+	ldr	r0, OMAP5910_MPU_CLKM_BASE	@ base of CLOCK unit
+	ldrh	r1, [r0, #0x18]			@ ARM_SYST - get reset status
 	bic	r1, r1, #(7 << 11)		@ clear clock select
 	orr	r1, r1, #(2 << 11)		@ set synchronous scalable
-	mov	r2, #0				@ set wait counter to 100 clock cycles
-
-icache_loop:
-	cmp	r2, #0x01
-	streqh	r1, [r0, #0x18]
-	add	r2, r2, #0x01
-	cmp	r2, #0x10
-	bne	icache_loop
+	mov	r2, #0
+loop:
+	cmp	r2, #1				@ this loop will wait for at least 100 cycles
+	streqh	r1, [r0, #0x18]			@ before issuing next request from MPU
+	add	r2, r2, #1			@ on the 1st run code is loaded into I-cache
+	cmp	r2, #16				@ and second run will set clocking mode
+	bne	loop
 	nop
 
-	/* Setup clock divisors */
-	ldr	r0, OMAP5910_MPU_CLKM_BASE	@ base of CLOCK unit
+	/* Setup clock dividers */
 	ldr	r1, _OMAP5910_ARM_CKCTL
 	orr	r1, r1, #0x2000			@ enable DSP clock
-	strh	r1, [r0, #0x00]			@ setup clock divisors
+	strh	r1, [r0]			@ setup clock divisors
 
 	/* Setup DPLL to generate requested freq */
 	ldr	r0, OMAP5910_DPLL1_BASE		@ base of DPLL1 register
@@ -186,8 +184,7 @@ locking:
 	ldr	r1, _OMAP5910_ARM_EN_CLK
 	strh	r1, [r0, #0x08]
 	mov	r1, #0x003f			@ FLASH.RP not enabled in idle and
-						@ max delayed ( 32 x CLKIN )
-	strh	r1, [r0, #0x0c]
+	strh	r1, [r0, #0x0c]			@ max delayed ( 32 x CLKIN )
 
 	/* Configure 5910 pins functions to match our board. */
 	ldr     r0, MUX_CONFIG_BASE
diff --git a/board/netta/Makefile b/board/netta/Makefile
index 68e24027a4..ee200c2d2d 100644
--- a/board/netta/Makefile
+++ b/board/netta/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= lib$(BOARD).a
 
-OBJS	= $(BOARD).o flash.o dsp.o codec.o
+OBJS	= $(BOARD).o flash.o dsp.o codec.o pcmcia.o
 
 $(LIB):	.depend $(OBJS)
 	$(AR) crv $@ $(OBJS)
diff --git a/board/netta/pcmcia.c b/board/netta/pcmcia.c
new file mode 100644
index 0000000000..a3709f7f77
--- /dev/null
+++ b/board/netta/pcmcia.c
@@ -0,0 +1,370 @@
+#include <common.h>
+#include <mpc8xx.h>
+#include <pcmcia.h>
+
+#undef	CONFIG_PCMCIA
+
+#if	(CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+#define	CONFIG_PCMCIA
+#endif
+
+#if	(CONFIG_COMMANDS & CFG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD)
+#define	CONFIG_PCMCIA
+#endif
+
+#ifdef	CONFIG_PCMCIA
+
+/* some sane bit macros */
+#define _BD(_b)				(1U << (31-(_b)))
+#define _BDR(_l, _h)			(((((1U << (31-(_l))) - 1) << 1) | 1) & ~((1U << (31-(_h))) - 1))
+
+#define _BW(_b)				(1U << (15-(_b)))
+#define _BWR(_l, _h)			(((((1U << (15-(_l))) - 1) << 1) | 1) & ~((1U << (15-(_h))) - 1))
+
+#define _BB(_b)				(1U << (7-(_b)))
+#define _BBR(_l, _h)			(((((1U << (7-(_l))) - 1) << 1) | 1) & ~((1U << (7-(_h))) - 1))
+
+#define _B(_b)				_BD(_b)
+#define _BR(_l, _h)			_BDR(_l, _h)
+
+#define PCMCIA_BOARD_MSG "NETTA"
+
+static const unsigned short vppd_masks[2] = { _BW(14), _BW(15) };
+
+static void cfg_vppd(int no)
+{
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	unsigned short mask;
+
+	if ((unsigned int)no >= sizeof(vppd_masks)/sizeof(vppd_masks[0]))
+		return;
+
+	mask = vppd_masks[no];
+
+	immap->im_ioport.iop_papar &= ~mask;
+	immap->im_ioport.iop_paodr &= ~mask;
+	immap->im_ioport.iop_padir |=  mask;
+}
+
+static void set_vppd(int no, int what)
+{
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	unsigned short mask;
+
+	if ((unsigned int)no >= sizeof(vppd_masks)/sizeof(vppd_masks[0]))
+		return;
+
+	mask = vppd_masks[no];
+
+	if (what)
+		immap->im_ioport.iop_padat |= mask;
+	else
+		immap->im_ioport.iop_padat &= ~mask;
+}
+
+static const unsigned short vccd_masks[2] = { _BW(10), _BW(6) };
+
+static void cfg_vccd(int no)
+{
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	unsigned short mask;
+
+	if ((unsigned int)no >= sizeof(vccd_masks)/sizeof(vccd_masks[0]))
+		return;
+
+	mask = vccd_masks[no];
+
+	immap->im_ioport.iop_papar &= ~mask;
+	immap->im_ioport.iop_paodr &= ~mask;
+	immap->im_ioport.iop_padir |=  mask;
+}
+
+static void set_vccd(int no, int what)
+{
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	unsigned short mask;
+
+	if ((unsigned int)no >= sizeof(vccd_masks)/sizeof(vccd_masks[0]))
+		return;
+
+	mask = vccd_masks[no];
+
+	if (what)
+		immap->im_ioport.iop_padat |= mask;
+	else
+		immap->im_ioport.iop_padat &= ~mask;
+}
+
+static const unsigned short oc_mask = _BW(8);
+
+static void cfg_oc(void)
+{
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	unsigned short mask = oc_mask;
+
+	immap->im_ioport.iop_pcdir &= ~mask;
+	immap->im_ioport.iop_pcso  &= ~mask;
+	immap->im_ioport.iop_pcint &= ~mask;
+	immap->im_ioport.iop_pcpar &= ~mask;
+}
+
+static int get_oc(void)
+{
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	unsigned short mask = oc_mask;
+	int what;
+
+	what = !!(immap->im_ioport.iop_pcdat & mask);;
+	return what;
+}
+
+static const unsigned short shdn_mask = _BW(12);
+
+static void cfg_shdn(void)
+{
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	unsigned short mask;
+
+	mask = shdn_mask;
+
+	immap->im_ioport.iop_papar &= ~mask;
+	immap->im_ioport.iop_paodr &= ~mask;
+	immap->im_ioport.iop_padir |=  mask;
+}
+
+static void set_shdn(int what)
+{
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	unsigned short mask;
+
+	mask = shdn_mask;
+
+	if (what)
+		immap->im_ioport.iop_padat |= mask;
+	else
+		immap->im_ioport.iop_padat &= ~mask;
+}
+
+static void cfg_ports (void)
+{
+	volatile immap_t	*immap;
+	volatile cpm8xx_t	*cp;
+
+	immap = (immap_t *)CFG_IMMR;
+	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
+
+
+	cfg_vppd(0); cfg_vppd(1);	/* VPPD0,VPPD1 VAVPP => Hi-Z */
+	cfg_vccd(0); cfg_vccd(1);	/* 3V and 5V off */
+	cfg_shdn();
+	cfg_oc();
+
+	/*
+	* Configure Port A for TPS2211 PC-Card Power-Interface Switch
+	*
+	* Switch off all voltages, assert shutdown
+	*/
+	set_vppd(0, 1); set_vppd(1, 1);
+	set_vccd(0, 0); set_vccd(1, 0);
+	set_shdn(1);
+
+	udelay(100000);
+}
+
+int pcmcia_hardware_enable(int slot)
+{
+	volatile immap_t	*immap;
+	volatile cpm8xx_t	*cp;
+	volatile pcmconf8xx_t	*pcmp;
+	volatile sysconf8xx_t	*sysp;
+	uint reg, pipr, mask;
+	int i;
+
+	debug ("hardware_enable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
+
+	udelay(10000);
+
+	immap = (immap_t *)CFG_IMMR;
+	sysp  = (sysconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_siu_conf));
+	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
+
+	/* Configure Ports for TPS2211A PC-Card Power-Interface Switch */
+	cfg_ports ();
+
+	/* clear interrupt state, and disable interrupts */
+	pcmp->pcmc_pscr =  PCMCIA_MASK(_slot_);
+	pcmp->pcmc_per &= ~PCMCIA_MASK(_slot_);
+
+	/*
+	* Disable interrupts, DMA, and PCMCIA buffers
+	* (isolate the interface) and assert RESET signal
+	*/
+	debug ("Disable PCMCIA buffers and assert RESET\n");
+	reg  = 0;
+	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX(_slot_) = reg;
+
+	udelay(500);
+
+	/*
+	* Make sure there is a card in the slot, then configure the interface.
+	*/
+	udelay(10000);
+	debug ("[%d] %s: PIPR(%p)=0x%x\n",
+	       __LINE__,__FUNCTION__,
+	       &(pcmp->pcmc_pipr),pcmp->pcmc_pipr);
+	if (pcmp->pcmc_pipr & (0x18000000 >> (slot << 4))) {
+		printf ("   No Card found\n");
+		return (1);
+	}
+
+	/*
+	* Power On: Set VAVCC to 3.3V or 5V, set VAVPP to Hi-Z
+	*/
+	mask = PCMCIA_VS1(slot) | PCMCIA_VS2(slot);
+	pipr = pcmp->pcmc_pipr;
+	debug ("PIPR: 0x%x ==> VS1=o%s, VS2=o%s\n",
+	       pipr,
+	       (reg&PCMCIA_VS1(slot))?"n":"ff",
+	       (reg&PCMCIA_VS2(slot))?"n":"ff");
+
+	if ((pipr & mask) == mask) {
+		set_vppd(0, 1); set_vppd(1, 1); 		/* VAVPP => Hi-Z */
+		set_vccd(0, 0); set_vccd(1, 1); 		/* 5V on, 3V off */
+		puts (" 5.0V card found: ");
+	} else {
+		set_vppd(0, 1); set_vppd(1, 1); 		/* VAVPP => Hi-Z */
+		set_vccd(0, 1); set_vccd(1, 0); 		/* 5V off, 3V on */
+		puts (" 3.3V card found: ");
+	}
+
+	/*  Wait 500 ms; use this to check for over-current */
+	for (i=0; i<5000; ++i) {
+		if (!get_oc()) {
+			printf ("   *** Overcurrent - Safety shutdown ***\n");
+			set_vccd(0, 0); set_vccd(1, 0); 		/* VAVPP => Hi-Z */
+			return (1);
+		}
+		udelay (100);
+	}
+
+	debug ("Enable PCMCIA buffers and stop RESET\n");
+	reg  =  PCMCIA_PGCRX(_slot_);
+	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg &= ~__MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX(_slot_) = reg;
+
+	udelay(250000);	/* some cards need >150 ms to come up :-( */
+
+	debug ("# hardware_enable done\n");
+
+	return (0);
+}
+
+
+#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+int pcmcia_hardware_disable(int slot)
+{
+	volatile immap_t	*immap;
+	volatile pcmconf8xx_t	*pcmp;
+	u_long reg;
+
+	debug ("hardware_disable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
+
+	immap = (immap_t *)CFG_IMMR;
+	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+
+	/* Configure PCMCIA General Control Register */
+	debug ("Disable PCMCIA buffers and assert RESET\n");
+	reg  = 0;
+	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX(_slot_) = reg;
+
+	/* All voltages off / Hi-Z */
+	set_vppd(0, 1); set_vppd(1, 1);
+	set_vccd(0, 1); set_vccd(1, 1);
+
+	udelay(10000);
+
+	return (0);
+}
+#endif	/* CFG_CMD_PCMCIA */
+
+
+int pcmcia_voltage_set(int slot, int vcc, int vpp)
+{
+	volatile immap_t	*immap;
+	volatile cpm8xx_t	*cp;
+	volatile pcmconf8xx_t	*pcmp;
+	u_long reg;
+	ushort sreg;
+
+	debug ("voltage_set: "
+			PCMCIA_BOARD_MSG
+			" Slot %c, Vcc=%d.%d, Vpp=%d.%d\n",
+	'A'+slot, vcc/10, vcc%10, vpp/10, vcc%10);
+
+	immap = (immap_t *)CFG_IMMR;
+	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
+	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+	/*
+	* Disable PCMCIA buffers (isolate the interface)
+	* and assert RESET signal
+	*/
+	debug ("Disable PCMCIA buffers and assert RESET\n");
+	reg  = PCMCIA_PGCRX(_slot_);
+	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX(_slot_) = reg;
+	udelay(500);
+
+	/*
+	* Configure Port C pins for
+	* 5 Volts Enable and 3 Volts enable,
+	* Turn all power pins to Hi-Z
+	*/
+	debug ("PCMCIA power OFF\n");
+	cfg_ports ();	/* Enables switch, but all in Hi-Z */
+
+	sreg  = immap->im_ioport.iop_pcdat;
+	set_vppd(0, 1); set_vppd(1, 1);
+
+	switch(vcc) {
+		case  0:
+			break;	/* Switch off		*/
+
+		case 33:
+			set_vccd(0, 1); set_vccd(1, 0);
+			break;
+
+		case 50:
+			set_vccd(0, 0); set_vccd(1, 1);
+			break;
+
+		default:
+			goto done;
+	}
+
+	/* Checking supported voltages */
+
+	debug ("PIPR: 0x%x --> %s\n",
+	       pcmp->pcmc_pipr,
+	       (pcmp->pcmc_pipr & 0x00008000) ? "only 5 V" : "can do 3.3V");
+
+done:
+			debug ("Enable PCMCIA buffers and stop RESET\n");
+	reg  =  PCMCIA_PGCRX(_slot_);
+	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg &= ~__MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX(_slot_) = reg;
+	udelay(500);
+
+	debug ("voltage_set: " PCMCIA_BOARD_MSG " Slot %c, DONE\n",
+	       slot+'A');
+	return (0);
+}
+
+#endif	/* CONFIG_PCMCIA */
diff --git a/board/ppmc7xx/Makefile b/board/ppmc7xx/Makefile
new file mode 100644
index 0000000000..c378677cc6
--- /dev/null
+++ b/board/ppmc7xx/Makefile
@@ -0,0 +1,47 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	:= ppmc7xx.o pci.o flash.o
+SOBJS	:= init.o
+
+$(LIB):	.depend $(OBJS) $(SOBJS)
+	$(AR) crv $@ $(OBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
diff --git a/board/ppmc7xx/config.mk b/board/ppmc7xx/config.mk
new file mode 100644
index 0000000000..b5b46dc56b
--- /dev/null
+++ b/board/ppmc7xx/config.mk
@@ -0,0 +1,28 @@
+#
+# (C) Copyright 2005
+# Richard Danter, Wind River Systems
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+
+TEXT_BASE = 0xFFF00000
+TEXT_END  = 0xFFF40000
+PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE)
diff --git a/board/ppmc7xx/flash.c b/board/ppmc7xx/flash.c
new file mode 100644
index 0000000000..4be6f13644
--- /dev/null
+++ b/board/ppmc7xx/flash.c
@@ -0,0 +1,494 @@
+/*
+ * flash.c
+ * -------
+ *
+ * Flash programming routines for the Wind River PPMC 74xx/7xx
+ * based on flash.c from the TQM8260 board.
+ *
+ * By Richard Danter (richard.danter@windriver.com)
+ * Copyright (C) 2005 Wind River Systems
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <74xx_7xx.h>
+
+#define DWORD unsigned long long
+
+/* Local function prototypes */
+static int	write_dword (flash_info_t* info, ulong dest, unsigned char *pdata);
+static void	write_via_fpu (volatile DWORD* addr, DWORD* data);
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+
+/*-----------------------------------------------------------------------
+ */
+void flash_reset (void)
+{
+	unsigned long msr;
+	DWORD cmd_reset = 0x00F000F000F000F0LL;
+
+	if (flash_info[0].flash_id != FLASH_UNKNOWN) {
+		msr = get_msr ();
+		set_msr (msr | MSR_FP);
+
+		write_via_fpu ((DWORD*)flash_info[0].start[0], &cmd_reset );
+
+		set_msr (msr);
+	}
+}
+
+/*-----------------------------------------------------------------------
+ */
+ulong flash_get_size (ulong baseaddr, flash_info_t * info)
+{
+	int i;
+	unsigned long msr;
+	DWORD flashtest;
+	DWORD cmd_select[3] = { 0x00AA00AA00AA00AALL, 0x0055005500550055LL,
+							0x0090009000900090LL };
+
+	/* Enable FPU */
+	msr = get_msr ();
+	set_msr (msr | MSR_FP);
+
+	/* Write auto-select command sequence */
+	write_via_fpu ((DWORD*)(baseaddr + (0x0555 << 3)), &cmd_select[0] );
+	write_via_fpu ((DWORD*)(baseaddr + (0x02AA << 3)), &cmd_select[1] );
+	write_via_fpu ((DWORD*)(baseaddr + (0x0555 << 3)), &cmd_select[2] );
+
+	/* Restore FPU */
+	set_msr (msr);
+
+	/* Read manufacturer ID */
+	flashtest = *(volatile DWORD*)baseaddr;
+	switch ((int)flashtest) {
+	case AMD_MANUFACT:
+		info->flash_id = FLASH_MAN_AMD;
+		break;
+	case FUJ_MANUFACT:
+		info->flash_id = FLASH_MAN_FUJ;
+		break;
+	default:
+		/* No, faulty or unknown flash */
+		info->flash_id = FLASH_UNKNOWN;
+		info->sector_count = 0;
+		info->size = 0;
+		return (0);
+	}
+
+	/* Read device ID */
+	flashtest = *(volatile DWORD*)(baseaddr + 8);
+	switch ((long)flashtest) {
+	case AMD_ID_LV800T:
+		info->flash_id += FLASH_AM800T;
+		info->sector_count = 19;
+		info->size = 0x00400000;
+		break;
+	case AMD_ID_LV800B:
+		info->flash_id += FLASH_AM800B;
+		info->sector_count = 19;
+		info->size = 0x00400000;
+		break;
+	case AMD_ID_LV160T:
+		info->flash_id += FLASH_AM160T;
+		info->sector_count = 35;
+		info->size = 0x00800000;
+		break;
+	case AMD_ID_LV160B:
+		info->flash_id += FLASH_AM160B;
+		info->sector_count = 35;
+		info->size = 0x00800000;
+		break;
+	case AMD_ID_DL322T:
+		info->flash_id += FLASH_AMDL322T;
+		info->sector_count = 71;
+		info->size = 0x01000000;
+		break;
+	case AMD_ID_DL322B:
+		info->flash_id += FLASH_AMDL322B;
+		info->sector_count = 71;
+		info->size = 0x01000000;
+		break;
+	case AMD_ID_DL323T:
+		info->flash_id += FLASH_AMDL323T;
+		info->sector_count = 71;
+		info->size = 0x01000000;
+		break;
+	case AMD_ID_DL323B:
+		info->flash_id += FLASH_AMDL323B;
+		info->sector_count = 71;
+		info->size = 0x01000000;
+		break;
+	case AMD_ID_LV640U:
+		info->flash_id += FLASH_AM640U;
+		info->sector_count = 128;
+		info->size = 0x02000000;
+		break;
+	default:
+		/* Unknown flash type */
+		info->flash_id = FLASH_UNKNOWN;
+		return (0);
+	}
+
+	if ((long)flashtest == AMD_ID_LV640U) {
+		/* set up sector start adress table (uniform sector type) */
+		for (i = 0; i < info->sector_count; i++)
+			info->start[i] = baseaddr + (i * 0x00040000);
+	} else if (info->flash_id & FLASH_BTYPE) {
+		/* set up sector start adress table (bottom sector type) */
+		info->start[0] = baseaddr + 0x00000000;
+		info->start[1] = baseaddr + 0x00010000;
+		info->start[2] = baseaddr + 0x00018000;
+		info->start[3] = baseaddr + 0x00020000;
+		for (i = 4; i < info->sector_count; i++) {
+			info->start[i] = baseaddr + (i * 0x00040000) - 0x000C0000;
+		}
+	} else {
+		/* set up sector start adress table (top sector type) */
+		i = info->sector_count - 1;
+		info->start[i--] = baseaddr + info->size - 0x00010000;
+		info->start[i--] = baseaddr + info->size - 0x00018000;
+		info->start[i--] = baseaddr + info->size - 0x00020000;
+		for (; i >= 0; i--) {
+			info->start[i] = baseaddr + i * 0x00040000;
+		}
+	}
+
+	/* check for protected sectors */
+	for (i = 0; i < info->sector_count; i++) {
+		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
+		if (*(volatile DWORD*)(info->start[i] + 16) & 0x0001000100010001LL) {
+			info->protect[i] = 1;	/* D0 = 1 if protected */
+		} else {
+			info->protect[i] = 0;
+		}
+	}
+
+	flash_reset ();
+	return (info->size);
+}
+
+/*-----------------------------------------------------------------------
+ */
+unsigned long flash_init (void)
+{
+	unsigned long size_b0 = 0;
+	int i;
+
+	/* Init: no FLASHes known */
+	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+		flash_info[i].flash_id = FLASH_UNKNOWN;
+	}
+
+	/* Static FLASH Bank configuration here (only one bank) */
+	size_b0 = flash_get_size (CFG_FLASH_BASE, &flash_info[0]);
+	if (flash_info[0].flash_id == FLASH_UNKNOWN || size_b0 == 0) {
+		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+				size_b0, size_b0 >> 20);
+	}
+
+	/*
+	 * protect monitor and environment sectors
+	 */
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+	flash_protect (FLAG_PROTECT_SET,
+		       CFG_MONITOR_BASE,
+		       CFG_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0]);
+#endif
+
+#if (CFG_ENV_IS_IN_FLASH == 1) && defined(CFG_ENV_ADDR)
+# ifndef  CFG_ENV_SIZE
+#  define CFG_ENV_SIZE	CFG_ENV_SECT_SIZE
+# endif
+	flash_protect (FLAG_PROTECT_SET,
+		       CFG_ENV_ADDR,
+		       CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+#endif
+
+	return (size_b0);
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t * info)
+{
+	int i;
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		printf ("missing or unknown FLASH type\n");
+		return;
+	}
+
+	switch (info->flash_id & FLASH_VENDMASK) {
+	case FLASH_MAN_AMD:
+		printf ("AMD ");
+		break;
+	case FLASH_MAN_FUJ:
+		printf ("FUJITSU ");
+		break;
+	default:
+		printf ("Unknown Vendor ");
+		break;
+	}
+
+	switch (info->flash_id & FLASH_TYPEMASK) {
+	case FLASH_AM800T:
+		printf ("29LV800T (8 M, top sector)\n");
+		break;
+	case FLASH_AM800B:
+		printf ("29LV800T (8 M, bottom sector)\n");
+		break;
+	case FLASH_AM160T:
+		printf ("29LV160T (16 M, top sector)\n");
+		break;
+	case FLASH_AM160B:
+		printf ("29LV160B (16 M, bottom sector)\n");
+		break;
+	case FLASH_AMDL322T:
+		printf ("29DL322T (32 M, top sector)\n");
+		break;
+	case FLASH_AMDL322B:
+		printf ("29DL322B (32 M, bottom sector)\n");
+		break;
+	case FLASH_AMDL323T:
+		printf ("29DL323T (32 M, top sector)\n");
+		break;
+	case FLASH_AMDL323B:
+		printf ("29DL323B (32 M, bottom sector)\n");
+		break;
+	case FLASH_AM640U:
+		printf ("29LV640D (64 M, uniform sector)\n");
+		break;
+	default:
+		printf ("Unknown Chip Type\n");
+		break;
+	}
+
+	printf ("  Size: %ld MB in %d Sectors\n",
+			info->size >> 20, info->sector_count);
+
+	printf ("  Sector Start Addresses:");
+	for (i = 0; i < info->sector_count; ++i) {
+		if ((i % 5) == 0)
+			printf ("\n   ");
+		printf (" %08lX%s",
+			info->start[i],
+			info->protect[i] ? " (RO)" : "     "
+		);
+	}
+	printf ("\n");
+	return;
+}
+
+/*-----------------------------------------------------------------------
+ */
+int flash_erase (flash_info_t * info, int s_first, int s_last)
+{
+	int flag, prot, sect, l_sect;
+	ulong start, now, last;
+	unsigned long msr;
+	DWORD cmd_erase[6] = { 0x00AA00AA00AA00AALL, 0x0055005500550055LL,
+						   0x0080008000800080LL, 0x00AA00AA00AA00AALL,
+						   0x0055005500550055LL, 0x0030003000300030LL };
+
+	if ((s_first < 0) || (s_first > s_last)) {
+		if (info->flash_id == FLASH_UNKNOWN) {
+			printf ("- missing\n");
+		} else {
+			printf ("- no sectors to erase\n");
+		}
+		return 1;
+	}
+
+	prot = 0;
+	for (sect = s_first; sect <= s_last; sect++) {
+		if (info->protect[sect])
+			prot++;
+	}
+
+	if (prot) {
+		printf ("- Warning: %d protected sectors will not be erased!\n",
+			prot);
+	} else {
+		printf ("\n");
+	}
+
+	l_sect = -1;
+
+	/* Enable FPU */
+	msr = get_msr();
+	set_msr ( msr | MSR_FP );
+
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts ();
+
+	write_via_fpu ((DWORD*)(info->start[0] + (0x0555 << 3)), &cmd_erase[0] );
+	write_via_fpu ((DWORD*)(info->start[0] + (0x02AA << 3)), &cmd_erase[1] );
+	write_via_fpu ((DWORD*)(info->start[0] + (0x0555 << 3)), &cmd_erase[2] );
+	write_via_fpu ((DWORD*)(info->start[0] + (0x0555 << 3)), &cmd_erase[3] );
+	write_via_fpu ((DWORD*)(info->start[0] + (0x02AA << 3)), &cmd_erase[4] );
+	udelay (1000);
+
+	/* Start erase on unprotected sectors */
+	for (sect = s_first; sect <= s_last; sect++) {
+		if (info->protect[sect] == 0) {	/* not protected */
+			write_via_fpu ((DWORD*)info->start[sect], &cmd_erase[5] );
+			l_sect = sect;
+		}
+	}
+
+	/* re-enable interrupts if necessary */
+	if (flag)
+		enable_interrupts ();
+
+	/* Restore FPU */
+	set_msr (msr);
+
+	/* wait at least 80us - let's wait 1 ms */
+	udelay (1000);
+
+	/*
+	 * We wait for the last triggered sector
+	 */
+	if (l_sect < 0)
+		goto DONE;
+
+	start = get_timer (0);
+	last = start;
+	while ((*(volatile DWORD*)info->start[l_sect] & 0x0080008000800080LL )
+				!= 0x0080008000800080LL )
+	{
+		if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT) {
+			printf ("Timeout\n");
+			return 1;
+		}
+		/* show that we're waiting */
+		if ((now - last) > 1000) {	/* every second */
+			serial_putc ('.');
+			last = now;
+		}
+	}
+
+  DONE:
+	/* reset to read mode */
+	flash_reset ();
+
+	printf (" done\n");
+	return 0;
+}
+
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+	ulong dp;
+	static unsigned char bb[8];
+	int i, l, rc, cc = cnt;
+
+	dp = (addr & ~7);		/* get lower dword aligned address */
+
+	/*
+	 * handle unaligned start bytes
+	 */
+	if ((l = addr - dp) != 0) {
+		for (i = 0; i < 8; i++)
+			bb[i] = (i < l || (i - l) >= cc) ? *(char*)(dp + i) : *src++;
+		if ((rc = write_dword (info, dp, bb)) != 0) {
+			return (rc);
+		}
+		dp += 8;
+		cc -= 8 - l;
+	}
+
+	/*
+	 * handle word aligned part
+	 */
+	while (cc >= 8) {
+		if ((rc = write_dword (info, dp, src)) != 0) {
+			return (rc);
+		}
+		dp += 8;
+		src += 8;
+		cc -= 8;
+	}
+
+	if (cc <= 0) {
+		return (0);
+	}
+
+	/*
+	 * handle unaligned tail bytes
+	 */
+	for (i = 0; i < 8; i++) {
+		bb[i] = (i < cc) ? *src++ : *(char*)(dp + i);
+	}
+	return (write_dword (info, dp, bb));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a dword to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_dword (flash_info_t * info, ulong dest, unsigned char *pdata)
+{
+	ulong start;
+	unsigned long msr;
+	int flag, i;
+	DWORD data;
+	DWORD cmd_write[3] = { 0x00AA00AA00AA00AALL, 0x0055005500550055LL,
+						   0x00A000A000A000A0LL };
+
+	for (data = 0, i = 0; i < 8; i++)
+		data = (data << 8) + *pdata++;
+
+	/* Check if Flash is (sufficiently) erased */
+	if ((*(DWORD*)dest & data) != data) {
+		return (2);
+	}
+
+	/* Enable FPU */
+	msr = get_msr();
+	set_msr( msr | MSR_FP );
+
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts ();
+
+	write_via_fpu ((DWORD*)(info->start[0] + (0x0555 << 3)), &cmd_write[0] );
+	write_via_fpu ((DWORD*)(info->start[0] + (0x02AA << 3)), &cmd_write[1] );
+	write_via_fpu ((DWORD*)(info->start[0] + (0x0555 << 3)), &cmd_write[2] );
+	write_via_fpu ((DWORD*)dest, &data );
+
+	/* re-enable interrupts if necessary */
+	if (flag)
+		enable_interrupts ();
+
+	/* Restore FPU */
+	set_msr(msr);
+
+	/* data polling for D7 */
+	start = get_timer (0);
+	while (*(volatile DWORD*)dest != data ) {
+		if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+			return (1);
+		}
+	}
+	return (0);
+}
+
+/*-----------------------------------------------------------------------
+ */
+static void write_via_fpu (volatile DWORD* addr, DWORD* data)
+{
+	__asm__ __volatile__ ("lfd  1, 0(%0)"::"r" (data));
+	__asm__ __volatile__ ("stfd 1, 0(%0)"::"r" (addr));
+	__asm__ __volatile__ ("eieio");
+}
diff --git a/board/ppmc7xx/init.S b/board/ppmc7xx/init.S
new file mode 100644
index 0000000000..99a818ad02
--- /dev/null
+++ b/board/ppmc7xx/init.S
@@ -0,0 +1,336 @@
+/*
+ * init.S
+ * ------
+ *
+ * Wind River PPMC 7xx/74xx init code.
+ *
+ * By Richard Danter (richard.danter@windriver.com)
+ * Copyright (C) 2005 Wind River Systems
+ *
+ * NOTE: The following code was generated automatically by Workbench
+ *       from the ppmc7400_107.reg register file.
+ */
+
+#include <ppc_asm.tmpl>
+
+
+.globl board_asm_init
+board_asm_init:
+
+      lis    r4,0xFEC0
+      ori    r4,r4,0x0000
+      lis    r5,0xFEE0
+      ori    r5,r5,0x0000
+      lis    r3,0x8000          # ADDR_00
+      ori    r3,r3,0x0000
+      stwbrx    r3,0,r4
+      li     r3,0x1057          # VENDOR
+      li    r8, 0x0
+      sthbrx    r3,r8,r5
+      lis    r3,0x8000          # ADDR_02
+      ori    r3,r3,0x0002
+      stwbrx    r3,0,r4
+      li     r3,0x0004          # ID
+      li    r8, 0x2
+      sthbrx    r3,r8,r5
+      lis    r3,0x8000          # ADDR_04
+      ori    r3,r3,0x0004
+      stwbrx    r3,0,r4
+      li     r3,0x0006          # PCICMD
+      li    r8, 0x0
+      sthbrx    r3,r8,r5
+      lis    r3,0x8000          # ADDR_06
+      ori    r3,r3,0x0006
+      stwbrx    r3,0,r4
+      li     r3,0x00A0          # PCISTAT
+      li    r8, 0x2
+      sthbrx    r3,r8,r5
+      lis    r3,0x8000          # ADDR_08
+      ori    r3,r3,0x0008
+      stwbrx    r3,0,r4
+      li     r3,0x10            # REVID
+      stb    r3,0x0(r5)
+      lis    r3,0x8000          # ADDR_09
+      ori    r3,r3,0x0009
+      stwbrx    r3,0,r4
+      li     r3,0x00            # PROGIR
+      stb    r3,0x1(r5)
+      lis    r3,0x8000          # ADDR_0A
+      ori    r3,r3,0x000A
+      stwbrx    r3,0,r4
+      li     r3,0x00            # SUBCCODE
+      stb    r3,0x2(r5)
+      lis    r3,0x8000          # ADDR_0B
+      ori    r3,r3,0x000B
+      stwbrx    r3,0,r4
+      li     r3,0x06            # PBCCR
+      stb    r3,0x3(r5)
+      lis    r3,0x8000          # ADDR_0C
+      ori    r3,r3,0x000C
+      stwbrx    r3,0,r4
+      li     r3,0x08            # PCLSR
+      stb    r3,0x0(r5)
+      lis    r3,0x8000          # ADDR_0D
+      ori    r3,r3,0x000D
+      stwbrx    r3,0,r4
+      li     r3,0x00            # PLTR
+      stb    r3,0x1(r5)
+      lis    r3,0x8000          # ADDR_0E
+      ori    r3,r3,0x000E
+      stwbrx    r3,0,r4
+      li     r3,0x00            # HEADTYPE
+      stb    r3,0x2(r5)
+      lis    r3,0x8000          # ADDR_0F
+      ori    r3,r3,0x000F
+      stwbrx    r3,0,r4
+      li     r3,0x00            # BISTCTRL
+      stb    r3,0x3(r5)
+      lis    r3,0x8000          # ADDR_10
+      ori    r3,r3,0x0010
+      stwbrx    r3,0,r4
+      lis    r3,0x0000          # LMBAR
+      ori    r3,r3,0x0008
+      li    r8, 0x0
+      stwbrx    r3,r8,r5
+      lis    r3,0x8000          # ADDR_14
+      ori    r3,r3,0x0014
+      stwbrx    r3,0,r4
+      lis    r3,0xF000          # PCSRBAR
+      ori    r3,r3,0x0000
+      li    r8, 0x0
+      stwbrx    r3,r8,r5
+      lis    r3,0x8000          # ADDR_3C
+      ori    r3,r3,0x003C
+      stwbrx    r3,0,r4
+      li     r3,0x00            # ILR
+      stb    r3,0x0(r5)
+      lis    r3,0x8000          # ADDR_3D
+      ori    r3,r3,0x003D
+      stwbrx    r3,0,r4
+      li     r3,0x01            # INTPIN
+      stb    r3,0x1(r5)
+      lis    r3,0x8000          # ADDR_3E
+      ori    r3,r3,0x003E
+      stwbrx    r3,0,r4
+      li     r3,0x00            # MIN_GNT
+      stb    r3,0x2(r5)
+      lis    r3,0x8000          # ADDR_3F
+      ori    r3,r3,0x003F
+      stwbrx    r3,0,r4
+      li     r3,0x00            # MAX_LAT
+      stb    r3,0x3(r5)
+      lis    r3,0x8000          # ADDR_40
+      ori    r3,r3,0x0040
+      stwbrx    r3,0,r4
+      li     r3,0x00            # BUSNB
+      stb    r3,0x0(r5)
+      lis    r3,0x8000          # ADDR_41
+      ori    r3,r3,0x0041
+      stwbrx    r3,0,r4
+      li     r3,0x00            # SBUSNB
+      stb    r3,0x1(r5)
+      lis    r3,0x8000          # ADDR_46
+      ori    r3,r3,0x0046
+      stwbrx    r3,0,r4
+#      li     r3,0xE080          # PCIARB
+      li     r3,-0x1F80          # PCIARB
+      li    r8, 0x2
+      sthbrx    r3,r8,r5
+      lis    r3,0x8000          # ADDR_70
+      ori    r3,r3,0x0070
+      stwbrx    r3,0,r4
+      li     r3,0x0000          # PMCR1
+      li    r8, 0x0
+      sthbrx    r3,r8,r5
+      lis    r3,0x8000          # ADDR_72
+      ori    r3,r3,0x0072
+      stwbrx    r3,0,r4
+      li     r3,0xC0            # PMCR2
+      stb    r3,0x2(r5)
+      lis    r3,0x8000          # ADDR_73
+      ori    r3,r3,0x0073
+      stwbrx    r3,0,r4
+      li     r3,0xEF            # ODCR
+      stb    r3,0x3(r5)
+      lis    r3,0x8000          # ADDR_74
+      ori    r3,r3,0x0074
+      stwbrx    r3,0,r4
+      li     r3,0x7D00          # CLKDCR
+      li    r8, 0x0
+      sthbrx    r3,r8,r5
+      lis    r3,0x8000          # ADDR_76
+      ori    r3,r3,0x0076
+      stwbrx    r3,0,r4
+      li     r3,0x00            # MDCR
+      stb    r3,0x2(r5)
+      lis    r6,0xFCE0
+      ori    r6,r6,0x0000       # r6 is the EUMBAR Base Address
+      lis    r3,0x8000          # ADDR_78
+      ori    r3,r3,0x0078
+      stwbrx    r3,0,r4
+      lis    r3,0xFCE0          # EUMBBAR
+      ori    r3,r3,0x0000
+      li    r8, 0x0
+      stwbrx    r3,r8,r5
+      lis    r3,0x8000          # ADDR_80
+      ori    r3,r3,0x0080
+      stwbrx    r3,0,r4
+      lis    r3,0xFFFF          # MSADDR1
+      ori    r3,r3,0x4000
+      li    r8, 0x0
+      stwbrx    r3,r8,r5
+      lis    r3,0x8000          # ADDR_84
+      ori    r3,r3,0x0084
+      stwbrx    r3,0,r4
+      lis    r3,0xFFFF          # MSADDR2
+      ori    r3,r3,0xFFFF
+      li    r8, 0x0
+      stwbrx    r3,r8,r5
+      lis    r3,0x8000          # ADDR_88
+      ori    r3,r3,0x0088
+      stwbrx    r3,0,r4
+      lis    r3,0x0303          # EMSADDR1
+      ori    r3,r3,0x0000
+      li    r8, 0x0
+      stwbrx    r3,r8,r5
+      lis    r3,0x8000          # ADDR_8C
+      ori    r3,r3,0x008C
+      stwbrx    r3,0,r4
+      lis    r3,0x0303          # EMSADDR2
+      ori    r3,r3,0x0303
+      li    r8, 0x0
+      stwbrx    r3,r8,r5
+      lis    r3,0x8000          # ADDR_90
+      ori    r3,r3,0x0090
+      stwbrx    r3,0,r4
+      lis    r3,0xFFFF          # EMEADDR1
+      ori    r3,r3,0x7F3F
+      li    r8, 0x0
+      stwbrx    r3,r8,r5
+      lis    r3,0x8000          # ADDR_94
+      ori    r3,r3,0x0094
+      stwbrx    r3,0,r4
+      lis    r3,0xFFFF          # EMEADDR2
+      ori    r3,r3,0xFFFF
+      li    r8, 0x0
+      stwbrx    r3,r8,r5
+      lis    r3,0x8000          # ADDR_98
+      ori    r3,r3,0x0098
+      stwbrx    r3,0,r4
+      lis    r3,0x0303          # EXTEMEM1
+      ori    r3,r3,0x0000
+      li    r8, 0x0
+      stwbrx    r3,r8,r5
+      lis    r3,0x8000          # ADDR_9C
+      ori    r3,r3,0x009C
+      stwbrx    r3,0,r4
+      lis    r3,0x0303          # EXTEMEM2
+      ori    r3,r3,0x0303
+      li    r8, 0x0
+      stwbrx    r3,r8,r5
+      lis    r3,0x8000          # ADDR_A0
+      ori    r3,r3,0x00A0
+      stwbrx    r3,0,r4
+      li     r3,0x03            # MEMBNKEN
+      stb    r3,0x0(r5)
+      lis    r3,0x8000          # ADDR_A3
+      ori    r3,r3,0x00A3
+      stwbrx    r3,0,r4
+      li     r3,0x00            # MEMPMODE
+      stb    r3,0x3(r5)
+      lis    r3,0x8000          # ADDR_B8
+      ori    r3,r3,0x00B8
+      stwbrx    r3,0,r4
+      li     r3,0x00            # ECCCNT
+      stb    r3,0x0(r5)
+      lis    r3,0x8000          # ADDR_B9
+      ori    r3,r3,0x00B9
+      stwbrx    r3,0,r4
+      li     r3,0x00            # ECCTRG
+      stb    r3,0x1(r5)
+      lis    r3,0x8000          # ADDR_C0
+      ori    r3,r3,0x00C0
+      stwbrx    r3,0,r4
+      li     r3,0xFF            # ERRENR1
+      stb    r3,0x0(r5)
+      lis    r3,0x8000          # ADDR_C1
+      ori    r3,r3,0x00C1
+      stwbrx    r3,0,r4
+      li     r3,0x00            # ERRDR1
+      stb    r3,0x1(r5)
+      lis    r3,0x8000          # ADDR_C3
+      ori    r3,r3,0x00C3
+      stwbrx    r3,0,r4
+      li     r3,0x50            # IPBESR
+      stb    r3,0x3(r5)
+      lis    r3,0x8000          # ADDR_C4
+      ori    r3,r3,0x00C4
+      stwbrx    r3,0,r4
+      li     r3,0xBF            # ERRENR2
+      stb    r3,0x0(r5)
+      lis    r3,0x8000          # ADDR_C5
+      ori    r3,r3,0x00C5
+      stwbrx    r3,0,r4
+      li     r3,0x00            # ERRDR2
+      stb    r3,0x1(r5)
+      lis    r3,0x8000          # ADDR_C7
+      ori    r3,r3,0x00C7
+      stwbrx    r3,0,r4
+      li     r3,0x00            # PCIBESR
+      stb    r3,0x3(r5)
+      lis    r3,0x8000          # ADDR_C8
+      ori    r3,r3,0x00C8
+      stwbrx    r3,0,r4
+      lis    r3,0x0000          # BERRADDR
+      ori    r3,r3,0xE0FE
+      li    r8, 0x0
+      stwbrx    r3,r8,r5
+      lis    r3,0x8000          # ADDR_E0
+      ori    r3,r3,0x00E0
+      stwbrx    r3,0,r4
+      li     r3,0xC0            # AMBOR
+      stb    r3,0x0(r5)
+      lis    r3,0x8000          # ADDR_F4
+      ori    r3,r3,0x00F4
+      stwbrx    r3,0,r4
+      lis    r3,0x0000          # MCCR2
+      ori    r3,r3,0x020C
+      li    r8, 0x0
+      stwbrx    r3,r8,r5
+      lis    r3,0x8000          # ADDR_F8
+      ori    r3,r3,0x00F8
+      stwbrx    r3,0,r4
+      lis    r3,0x0230          # MCCR3
+      ori    r3,r3,0x0000
+      li    r8, 0x0
+      stwbrx    r3,r8,r5
+      lis    r3,0x8000          # ADDR_FC
+      ori    r3,r3,0x00FC
+      stwbrx    r3,0,r4
+      lis    r3,0x2532          # MCCR4
+      ori    r3,r3,0x2220
+      li    r8, 0x0
+      stwbrx    r3,r8,r5
+      lis    r3,0x8000          # ADDR_F0
+      ori    r3,r3,0x00F0
+      stwbrx    r3,0,r4
+      lis    r3,0xFFC8          # MCCR1
+      ori    r3,r3,0x0000
+      li    r8, 0x0
+      stwbrx    r3,r8,r5
+      lis    r3,0x8000          # ADDR_A8
+      ori    r3,r3,0x00A8
+      stwbrx    r3,0,r4
+      lis    r3,0xFF14          # PICR1
+      ori    r3,r3,0x1CC8
+      li    r8, 0x0
+      stwbrx    r3,r8,r5
+      lis    r3,0x8000          # ADDR_AC
+      ori    r3,r3,0x00AC
+      stwbrx    r3,0,r4
+      lis    r3,0x0000          # PICR2
+      ori    r3,r3,0x0000
+      li    r8, 0x0
+      stwbrx    r3,r8,r5
+
+      blr
diff --git a/board/ppmc7xx/pci.c b/board/ppmc7xx/pci.c
new file mode 100644
index 0000000000..5b115ea617
--- /dev/null
+++ b/board/ppmc7xx/pci.c
@@ -0,0 +1,97 @@
+/*
+ * (C) Copyright 2002 ELTEC Elektronik AG
+ * Frank Gottschling <fgottschling@eltec.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * PCI initialisation for the MPC10x.
+ */
+
+#include <common.h>
+#include <pci.h>
+#include <mpc106.h>
+
+#ifdef CONFIG_PCI
+
+struct pci_controller local_hose;
+
+void pci_init_board(void)
+{
+    struct pci_controller* hose = (struct pci_controller *)&local_hose;
+    u16 reg16;
+
+    hose->first_busno = 0;
+    hose->last_busno = 0xff;
+
+    pci_set_region(hose->regions + 0,
+	CFG_PCI_MEMORY_BUS,
+	CFG_PCI_MEMORY_PHYS,
+	CFG_PCI_MEMORY_SIZE,
+	PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+    /* PCI memory space */
+    pci_set_region(hose->regions + 1,
+	CFG_PCI_MEM_BUS,
+	CFG_PCI_MEM_PHYS,
+	CFG_PCI_MEM_SIZE,
+	PCI_REGION_MEM);
+
+    /* ISA/PCI memory space */
+    pci_set_region(hose->regions + 2,
+	CFG_ISA_MEM_BUS,
+	CFG_ISA_MEM_PHYS,
+	CFG_ISA_MEM_SIZE,
+	PCI_REGION_MEM);
+
+    /* PCI I/O space */
+    pci_set_region(hose->regions + 3,
+	CFG_PCI_IO_BUS,
+	CFG_PCI_IO_PHYS,
+	CFG_PCI_IO_SIZE,
+	PCI_REGION_IO);
+
+    /* ISA/PCI I/O space */
+    pci_set_region(hose->regions + 4,
+	CFG_ISA_IO_BUS,
+	CFG_ISA_IO_PHYS,
+	CFG_ISA_IO_SIZE,
+	PCI_REGION_IO);
+
+    hose->region_count = 5;
+
+    pci_setup_indirect(hose,
+	MPC106_REG_ADDR,
+	MPC106_REG_DATA);
+
+    pci_register_hose(hose);
+
+    hose->last_busno = pci_hose_scan(hose);
+
+    /* Initialises the MPC10x PCI Configuration regs. */
+    pci_read_config_word (PCI_BDF(0,0,0), PCI_COMMAND, &reg16);
+    reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+    pci_write_config_word(PCI_BDF(0,0,0), PCI_COMMAND, reg16);
+
+    /* Clear non-reserved bits in status register */
+    pci_write_config_word(PCI_BDF(0,0,0), PCI_STATUS, 0xffff);
+}
+
+#endif /* CONFIG_PCI */
diff --git a/board/ppmc7xx/ppmc7xx.c b/board/ppmc7xx/ppmc7xx.c
new file mode 100644
index 0000000000..402ac5e201
--- /dev/null
+++ b/board/ppmc7xx/ppmc7xx.c
@@ -0,0 +1,104 @@
+/*
+ * ppmc7xx.c
+ * ---------
+ *
+ * Main board-specific routines for Wind River PPMC 7xx/74xx board.
+ *
+ * By Richard Danter (richard.danter@windriver.com)
+ * Copyright (C) 2005 Wind River Systems
+ */
+
+#include <common.h>
+#include <command.h>
+
+
+/* Define some MPC107 (memory controller) registers */
+#define MPC107_EUMB_GCR         0xfce41020
+#define MPC107_EUMB_IACKR       0xfce600a0
+
+
+/* Function prototypes */
+extern void unlock_ram_in_cache( void );
+extern void _start_warm(void);
+
+
+/*
+ * initdram()
+ *
+ * This function normally initialises the (S)DRAM of the system. For this board
+ * the SDRAM was already initialised by board_asm_init (see init.S) so we just
+ * return the size of RAM.
+ */
+long initdram( int board_type )
+{
+    return CFG_SDRAM_SIZE;
+}
+
+
+/*
+ * after_reloc()
+ *
+ * This is called after U-Boot has been copied from Flash/ROM to RAM. It gives
+ * us an opportunity to do some additional setup before the rest of the system
+ * is initialised. We don't need to do anything, so we just call board_init_r()
+ * which should never return.
+ */
+void after_reloc( ulong dest_addr, gd_t* gd )
+{
+	/* Jump to the main U-Boot board init code */
+	board_init_r( gd, dest_addr );
+}
+
+
+/*
+ * checkboard()
+ *
+ * We could do some board level checks here, such as working out what version
+ * it is, but for this board we simply display it's name (on the console).
+ */
+int checkboard( void )
+{
+    puts( "Board: Wind River PPMC 7xx/74xx\n" );
+    return 0;
+}
+
+
+/*
+ * misc_init_r
+ *
+ * Used for other setup which needs to be done late in the bring-up phase.
+ */
+int misc_init_r( void )
+{
+	/* Reset the EPIC and clear pending interrupts */
+	out32r(MPC107_EUMB_GCR, 0xa0000000);
+	while( in32r( MPC107_EUMB_GCR ) & 0x80000000 );
+	out32r( MPC107_EUMB_GCR, 0x20000000 );
+	while( in32r( MPC107_EUMB_IACKR ) != 0xff );
+
+	/* Enable the I-Cache */
+	icache_enable();
+
+	return 0;
+}
+
+
+/*
+ * do_reset()
+ *
+ * Shell command to reset the board.
+ */
+void do_reset( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[] )
+{
+	printf( "Resetting...\n" );
+
+	/* Disabe and invalidate cache */
+	icache_disable();
+	dcache_disable();
+
+	/* Jump to warm start (in RAM) */
+	_start_warm();
+
+	/* Should never get here */
+	while(1);
+}
diff --git a/board/ppmc7xx/u-boot.lds b/board/ppmc7xx/u-boot.lds
new file mode 100644
index 0000000000..0dfa8c0005
--- /dev/null
+++ b/board/ppmc7xx/u-boot.lds
@@ -0,0 +1,135 @@
+/*
+ * (C) Copyright 2001
+ * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * u-boot.lds - linker script for U-Boot on the Galileo Eval Board.
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    cpu/74xx_7xx/start.o	(.text)
+
+/* store the environment in a seperate sector in the boot flash */
+/*    . = env_offset; */
+/*    common/environment.o(.text) */
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
diff --git a/board/psyent/common/AMDLV065D.c b/board/psyent/common/AMDLV065D.c
index 4965743bd5..8a7b14ee2f 100644
--- a/board/psyent/common/AMDLV065D.c
+++ b/board/psyent/common/AMDLV065D.c
@@ -26,7 +26,7 @@
 #if defined(CONFIG_NIOS)
 #include <nios.h>
 #else
-#include <nios2.h>
+#include <asm/io.h>
 #endif
 
 #define SECTSZ		(64 * 1024)
@@ -56,9 +56,8 @@ unsigned long flash_init (void)
 void flash_print_info (flash_info_t * info)
 {
 	int i, k;
-	unsigned long size;
 	int erased;
-	volatile unsigned char *flash;
+	unsigned long *addr;
 
 	printf ("  Size: %ld KB in %d Sectors\n",
 		info->size >> 10, info->sector_count);
@@ -66,14 +65,10 @@ void flash_print_info (flash_info_t * info)
 	for (i = 0; i < info->sector_count; ++i) {
 
 		/* Check if whole sector is erased */
-		if (i != (info->sector_count - 1))
-			size = info->start[i + 1] - info->start[i];
-		else
-			size = info->start[0] + info->size - info->start[i];
 		erased = 1;
-		flash = (volatile unsigned char *) CACHE_BYPASS(info->start[i]);
-		for (k = 0; k < size; k++) {
-			if (*flash++ != 0xff) {
+		addr = (unsigned long *) info->start[i];
+		for (k = 0; k < SECTSZ/sizeof(unsigned long); k++) {
+			if ( readl(addr++) != (unsigned long)-1) {
 				erased = 0;
 				break;
 			}
@@ -83,7 +78,7 @@ void flash_print_info (flash_info_t * info)
 		if ((i % 5) == 0)
 			printf ("\n   ");
 		printf (" %08lX%s%s",
-			CACHE_NO_BYPASS(info->start[i]),
+			info->start[i],
 			erased ? " E" : "  ",
 			info->protect[i] ? "RO " : "   ");
 	}
@@ -95,9 +90,8 @@ void flash_print_info (flash_info_t * info)
 
 int flash_erase (flash_info_t * info, int s_first, int s_last)
 {
-	volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *)
-		CACHE_BYPASS(info->start[0]);
-	volatile CFG_FLASH_WORD_SIZE *addr2;
+	unsigned char *addr = (unsigned char *) info->start[0];
+	unsigned char *addr2;
 	int prot, sect;
 	ulong start;
 
@@ -127,19 +121,18 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 	 */
 	for (sect = s_first; sect <= s_last; sect++) {
 		if (info->protect[sect] == 0) {	/* not protected */
-			addr2 = (CFG_FLASH_WORD_SIZE *)
-				CACHE_BYPASS((info->start[sect]));
-			*addr = 0xaa;
-			*addr = 0x55;
-			*addr = 0x80;
-			*addr = 0xaa;
-			*addr = 0x55;
-			*addr2 = 0x30;
+			addr2 = (unsigned char *) info->start[sect];
+			writeb (addr, 0xaa);
+			writeb (addr,  0x55);
+			writeb (addr,  0x80);
+			writeb (addr,  0xaa);
+			writeb (addr,  0x55);
+			writeb (addr2, 0x30);
 			/* Now just wait for 0xff & provide some user
 			 * feedback while we wait.
 			 */
 			start = get_timer (0);
-			while (*addr2 != 0xff) {
+			while ( readb (addr2) != 0xff) {
 				udelay (1000 * 1000);
 				putc ('.');
 				if (get_timer (start) > CFG_FLASH_ERASE_TOUT) {
@@ -163,27 +156,27 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
 {
 
-	vu_char *cmd = (vu_char *) CACHE_BYPASS(info->start[0]);
-	vu_char *dst = (vu_char *) CACHE_BYPASS(addr);
+	vu_char *cmd = (vu_char *) info->start[0];
+	vu_char *dst = (vu_char *) addr;
 	unsigned char b;
 	ulong start;
 
 	while (cnt) {
 		/* Check for sufficient erase */
 		b = *src;
-		if ((*dst & b) != b) {
-			printf ("%02x : %02x\n", *dst, b);
+		if ((readb (dst) & b) != b) {
+			printf ("%02x : %02x\n", readb (dst), b);
 			return (2);
 		}
 
-		*cmd = 0xaa;
-		*cmd = 0x55;
-		*cmd = 0xa0;
-		*dst = b;
+		writeb (cmd,  0xaa);
+		writeb (cmd,  0x55);
+		writeb (cmd,  0xa0);
+		writeb (dst, b);
 
 		/* Verify write */
 		start = get_timer (0);
-		while (*dst != b) {
+		while (readb (dst) != b) {
 			if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
 				return 1;
 			}
diff --git a/board/psyent/pk1c20/config.mk b/board/psyent/pk1c20/config.mk
index d72bceed2d..d65780dd9b 100644
--- a/board/psyent/pk1c20/config.mk
+++ b/board/psyent/pk1c20/config.mk
@@ -21,7 +21,7 @@
 # MA 02111-1307 USA
 #
 
-TEXT_BASE = 0x018e0000
+TEXT_BASE = 0x01fc0000
 
 PLATFORM_CPPFLAGS += -mno-hw-div -mno-hw-mul
 PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(VENDOR)/include
diff --git a/board/psyent/pk1c20/led.c b/board/psyent/pk1c20/led.c
index c175c9b870..c75fe8c573 100644
--- a/board/psyent/pk1c20/led.c
+++ b/board/psyent/pk1c20/led.c
@@ -22,7 +22,7 @@
  */
 
 #include <common.h>
-#include <nios2.h>
+#include <asm/io.h>
 #include <nios2-io.h>
 #include <status_led.h>
 
@@ -33,30 +33,30 @@ static led_id_t val = 0;
 
 void __led_init (led_id_t mask, int state)
 {
-	nios_pio_t *pio = (nios_pio_t *)CACHE_BYPASS(CFG_LEDPIO_ADDR);
+	nios_pio_t *pio = (nios_pio_t *)CFG_LEDPIO_ADDR;
 
 	if (state == STATUS_LED_ON)
 		val &= ~mask;
 	else
 		val |= mask;
-	pio->data = val;
+	writel (&pio->data, val);
 }
 
 void __led_set (led_id_t mask, int state)
 {
-	nios_pio_t *pio = (nios_pio_t *)CACHE_BYPASS(CFG_LEDPIO_ADDR);
+	nios_pio_t *pio = (nios_pio_t *)CFG_LEDPIO_ADDR;
 
 	if (state == STATUS_LED_ON)
 		val &= ~mask;
 	else
 		val |= mask;
-	pio->data = val;
+	writel (&pio->data, val);
 }
 
 void __led_toggle (led_id_t mask)
 {
-	nios_pio_t *pio = (nios_pio_t *)CACHE_BYPASS(CFG_LEDPIO_ADDR);
+	nios_pio_t *pio = (nios_pio_t *)CFG_LEDPIO_ADDR;
 
 	val ^= mask;
-	pio->data = val;
+	writel (&pio->data, val);
 }
diff --git a/board/r360mpi/Makefile b/board/r360mpi/Makefile
index 13ce9fc9d2..1a7e7a693a 100644
--- a/board/r360mpi/Makefile
+++ b/board/r360mpi/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= lib$(BOARD).a
 
-OBJS	= $(BOARD).o flash.o
+OBJS	= $(BOARD).o flash.o pcmcia.o
 
 $(LIB):	.depend $(OBJS)
 	$(AR) crv $@ $(OBJS)
diff --git a/board/r360mpi/pcmcia.c b/board/r360mpi/pcmcia.c
new file mode 100644
index 0000000000..7d34ac80ae
--- /dev/null
+++ b/board/r360mpi/pcmcia.c
@@ -0,0 +1,236 @@
+#include <common.h>
+#include <mpc8xx.h>
+#include <pcmcia.h>
+
+#undef	CONFIG_PCMCIA
+
+#if	(CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+#define	CONFIG_PCMCIA
+#endif
+
+#if	(CONFIG_COMMANDS & CFG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD)
+#define	CONFIG_PCMCIA
+#endif
+
+#ifdef	CONFIG_PCMCIA
+
+#define PCMCIA_BOARD_MSG "R360MPI"
+
+int pcmcia_hardware_enable(int slot)
+{
+	volatile immap_t	*immap;
+	volatile cpm8xx_t	*cp;
+	volatile pcmconf8xx_t	*pcmp;
+	volatile sysconf8xx_t	*sysp;
+	uint reg, mask;
+
+	debug ("hardware_enable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
+
+	udelay(10000);
+
+	immap = (immap_t *)CFG_IMMR;
+	sysp  = (sysconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_siu_conf));
+	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
+
+	/*
+	* Configure SIUMCR to enable PCMCIA port B
+	* (VFLS[0:1] are not used for debugging, we connect FRZ# instead)
+	*/
+	sysp->sc_siumcr &= ~SIUMCR_DBGC11;	/* set DBGC to 00 */
+
+	/* clear interrupt state, and disable interrupts */
+	pcmp->pcmc_pscr =  PCMCIA_MASK(_slot_);
+	pcmp->pcmc_per &= ~PCMCIA_MASK(_slot_);
+
+	/*
+	* Disable interrupts, DMA, and PCMCIA buffers
+	* (isolate the interface) and assert RESET signal
+	*/
+	debug ("Disable PCMCIA buffers and assert RESET\n");
+	reg  = 0;
+	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX(_slot_) = reg;
+	udelay(500);
+
+	/*
+	* Configure Ports A, B & C pins for
+	* 5 Volts Enable and 3 Volts enable
+	*/
+	immap->im_ioport.iop_pcpar &= ~(0x0400);
+	immap->im_ioport.iop_pcso  &= ~(0x0400);/*
+	immap->im_ioport.iop_pcdir |= 0x0400;*/
+
+	immap->im_ioport.iop_papar &= ~(0x0200);/*
+	immap->im_ioport.iop_padir |= 0x0200;*/
+#if 0
+	immap->im_ioport.iop_pbpar &= ~(0xC000);
+	immap->im_ioport.iop_pbdir &= ~(0xC000);
+#endif
+	/* remove all power */
+
+	immap->im_ioport.iop_pcdat |= 0x0400;
+	immap->im_ioport.iop_padat |= 0x0200;
+
+	/*
+	* Make sure there is a card in the slot, then configure the interface.
+	*/
+	udelay(10000);
+	debug ("[%d] %s: PIPR(%p)=0x%x\n",
+	       __LINE__,__FUNCTION__,
+	       &(pcmp->pcmc_pipr),pcmp->pcmc_pipr);
+	if (pcmp->pcmc_pipr & (0x18000000 >> (slot << 4))) {
+		printf ("   No Card found\n");
+		return (1);
+	}
+
+	/*
+	* Power On.
+	*/
+	mask = PCMCIA_VS1(slot) | PCMCIA_VS2(slot);
+	reg  = pcmp->pcmc_pipr;
+	debug ("PIPR: 0x%x ==> VS1=o%s, VS2=o%s\n",
+	       reg,
+	       (reg&PCMCIA_VS1(slot))?"n":"ff",
+	       (reg&PCMCIA_VS2(slot))?"n":"ff");
+	if ((reg & mask) == mask) {
+		immap->im_ioport.iop_pcdat &= ~(0x4000);
+		puts (" 5.0V card found: ");
+	} else {
+		immap->im_ioport.iop_padat &= ~(0x0002);
+		puts (" 3.3V card found: ");
+	}
+	immap->im_ioport.iop_pcdir |= 0x0400;
+	immap->im_ioport.iop_padir |= 0x0200;
+#if 0
+	/*  VCC switch error flag, PCMCIA slot INPACK_ pin */
+	cp->cp_pbdir &= ~(0x0020 | 0x0010);
+	cp->cp_pbpar &= ~(0x0020 | 0x0010);
+	udelay(500000);
+#endif
+	debug ("Enable PCMCIA buffers and stop RESET\n");
+	reg  =  PCMCIA_PGCRX(_slot_);
+	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg &= ~__MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX(_slot_) = reg;
+
+	udelay(250000);	/* some cards need >150 ms to come up :-( */
+
+	debug ("# hardware_enable done\n");
+
+	return (0);
+}
+
+
+#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+int pcmcia_hardware_disable(int slot)
+{
+	volatile immap_t	*immap;
+	volatile pcmconf8xx_t	*pcmp;
+	u_long reg;
+
+	debug ("hardware_disable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
+
+	immap = (immap_t *)CFG_IMMR;
+	pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+
+	/* remove all power */
+	immap->im_ioport.iop_pcdat |= 0x0400;
+	immap->im_ioport.iop_padat |= 0x0200;
+
+	/* Configure PCMCIA General Control Register */
+	debug ("Disable PCMCIA buffers and assert RESET\n");
+	reg  = 0;
+	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX(_slot_) = reg;
+
+	udelay(10000);
+
+	return (0);
+}
+#endif	/* CFG_CMD_PCMCIA */
+
+
+int pcmcia_voltage_set(int slot, int vcc, int vpp)
+{
+	volatile immap_t	*immap;
+	volatile pcmconf8xx_t	*pcmp;
+	u_long reg;
+
+	debug ("voltage_set: "
+			PCMCIA_BOARD_MSG
+			" Slot %c, Vcc=%d.%d, Vpp=%d.%d\n",
+	'A'+slot, vcc/10, vcc%10, vpp/10, vcc%10);
+
+	immap = (immap_t *)CFG_IMMR;
+	pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+	/*
+	* Disable PCMCIA buffers (isolate the interface)
+	* and assert RESET signal
+	*/
+	debug ("Disable PCMCIA buffers and assert RESET\n");
+	reg  = PCMCIA_PGCRX(_slot_);
+	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX(_slot_) = reg;
+	udelay(500);
+
+	/*
+	* Configure Ports A & C pins for
+	* 5 Volts Enable and 3 Volts enable,
+	* Turn off all power
+	*/
+	debug ("PCMCIA power OFF\n");
+	immap->im_ioport.iop_pcpar &= ~(0x0400);
+	immap->im_ioport.iop_pcso  &= ~(0x0400);/*
+	immap->im_ioport.iop_pcdir |= 0x0400;*/
+
+	immap->im_ioport.iop_papar &= ~(0x0200);/*
+	immap->im_ioport.iop_padir |= 0x0200;*/
+
+	immap->im_ioport.iop_pcdat |= 0x0400;
+	immap->im_ioport.iop_padat |= 0x0200;
+
+	reg = 0;
+	switch(vcc) {
+		case  0: 		break;
+		case 33: reg |= 0x0200;	break;
+		case 50: reg |= 0x0400;	break;
+		default: 		goto done;
+	}
+
+	/* Checking supported voltages */
+
+	debug ("PIPR: 0x%x --> %s\n",
+	       pcmp->pcmc_pipr,
+	       (pcmp->pcmc_pipr & 0x00008000) ? "only 5 V" : "can do 3.3V");
+
+	if (reg & 0x0200)
+		immap->im_ioport.iop_pcdat &= !reg;
+	if (reg & 0x0400)
+		immap->im_ioport.iop_padat &= !reg;
+	immap->im_ioport.iop_pcdir |= 0x0200;
+	immap->im_ioport.iop_padir |= 0x0400;
+	if (reg) {
+		debug ("PCMCIA powered at %sV\n",
+		       (reg&0x0400) ? "5.0" : "3.3");
+	} else {
+		debug ("PCMCIA powered down\n");
+	}
+
+done:
+			debug ("Enable PCMCIA buffers and stop RESET\n");
+	reg  =  PCMCIA_PGCRX(_slot_);
+	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg &= ~__MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX(_slot_) = reg;
+	udelay(500);
+
+	debug ("voltage_set: " PCMCIA_BOARD_MSG " Slot %c, DONE\n",
+	       slot+'A');
+	return (0);
+}
+
+#endif	/* CCONFIG_PCMCIA */
diff --git a/board/sbc2410x/Makefile b/board/sbc2410x/Makefile
new file mode 100644
index 0000000000..ae8665ec37
--- /dev/null
+++ b/board/sbc2410x/Makefile
@@ -0,0 +1,47 @@
+#
+# (C) Copyright 2000, 2001, 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	:= sbc2410x.o flash.o
+SOBJS	:= lowlevel_init.o
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $(OBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
diff --git a/board/sbc2410x/config.mk b/board/sbc2410x/config.mk
new file mode 100644
index 0000000000..f244e642c2
--- /dev/null
+++ b/board/sbc2410x/config.mk
@@ -0,0 +1,23 @@
+#
+# (C) Copyright 2002
+# Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
+#
+# SAMSUNG SMDK2410 board with S3C2410X (ARM920T) cpu
+#
+# see http://www.samsung.com/ for more information on SAMSUNG
+#
+
+#
+# SMDK2410 has 1 bank of 64 MB DRAM
+#
+# 3000'0000 to 3400'0000
+#
+# Linux-Kernel is expected to be at 3000'8000, entry 3000'8000
+# optionally with a ramdisk at 3080'0000
+#
+# we load ourself to 33F8'0000
+#
+# download area is 3300'0000
+
+TEXT_BASE = 0x33F80000
diff --git a/board/sbc2410x/flash.c b/board/sbc2410x/flash.c
new file mode 100644
index 0000000000..f2718f256f
--- /dev/null
+++ b/board/sbc2410x/flash.c
@@ -0,0 +1,431 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+ulong myflush (void);
+
+#define FLASH_BANK_SIZE	PHYS_FLASH_SIZE
+#define MAIN_SECT_SIZE  0x10000	/* 64 KB */
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+
+#define CMD_READ_ARRAY		0x000000F0
+#define CMD_UNLOCK1		0x000000AA
+#define CMD_UNLOCK2		0x00000055
+#define CMD_ERASE_SETUP		0x00000080
+#define CMD_ERASE_CONFIRM	0x00000030
+#define CMD_PROGRAM		0x000000A0
+#define CMD_UNLOCK_BYPASS	0x00000020
+
+#define MEM_FLASH_ADDR1		(*(volatile u16 *)(CFG_FLASH_BASE + (0x00000555 << 1)))
+#define MEM_FLASH_ADDR2		(*(volatile u16 *)(CFG_FLASH_BASE + (0x000002AA << 1)))
+
+#define BIT_ERASE_DONE		0x00000080
+#define BIT_RDY_MASK		0x00000080
+#define BIT_PROGRAM_ERROR	0x00000020
+#define BIT_TIMEOUT		0x80000000	/* our flag */
+
+#define READY 1
+#define ERR   2
+#define TMO   4
+
+/*-----------------------------------------------------------------------
+ */
+
+ulong flash_init (void)
+{
+	int i, j;
+	ulong size = 0;
+
+	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+		ulong flashbase = 0;
+
+		flash_info[i].flash_id =
+#if defined(CONFIG_AMD_LV400)
+			(AMD_MANUFACT & FLASH_VENDMASK) |
+			(AMD_ID_LV400B & FLASH_TYPEMASK);
+#elif defined(CONFIG_AMD_LV800)
+			(AMD_MANUFACT & FLASH_VENDMASK) |
+			(AMD_ID_LV800B & FLASH_TYPEMASK);
+#else
+#error "Unknown flash configured"
+#endif
+			flash_info[i].size = FLASH_BANK_SIZE;
+		flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
+		memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+		if (i == 0)
+			flashbase = PHYS_FLASH_1;
+		else
+			panic ("configured too many flash banks!\n");
+		for (j = 0; j < flash_info[i].sector_count; j++) {
+			if (j <= 3) {
+				/* 1st one is 16 KB */
+				if (j == 0) {
+					flash_info[i].start[j] =
+						flashbase + 0;
+				}
+
+				/* 2nd and 3rd are both 8 KB */
+				if ((j == 1) || (j == 2)) {
+					flash_info[i].start[j] =
+						flashbase + 0x4000 + (j -
+								      1) *
+						0x2000;
+				}
+
+				/* 4th 32 KB */
+				if (j == 3) {
+					flash_info[i].start[j] =
+						flashbase + 0x8000;
+				}
+			} else {
+				flash_info[i].start[j] =
+					flashbase + (j - 3) * MAIN_SECT_SIZE;
+			}
+		}
+		size += flash_info[i].size;
+	}
+
+	flash_protect (FLAG_PROTECT_SET,
+		       CFG_FLASH_BASE,
+		       CFG_FLASH_BASE + monitor_flash_len - 1,
+		       &flash_info[0]);
+
+	flash_protect (FLAG_PROTECT_SET,
+		       CFG_ENV_ADDR,
+		       CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+
+	return size;
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t * info)
+{
+	int i;
+
+	switch (info->flash_id & FLASH_VENDMASK) {
+	case (AMD_MANUFACT & FLASH_VENDMASK):
+		printf ("AMD: ");
+		break;
+	default:
+		printf ("Unknown Vendor ");
+		break;
+	}
+
+	switch (info->flash_id & FLASH_TYPEMASK) {
+	case (AMD_ID_LV400B & FLASH_TYPEMASK):
+		printf ("1x Amd29LV400BB (4Mbit)\n");
+		break;
+	case (AMD_ID_LV800B & FLASH_TYPEMASK):
+		printf ("1x Amd29LV800BB (8Mbit)\n");
+		break;
+	default:
+		printf ("Unknown Chip Type\n");
+		goto Done;
+		break;
+	}
+
+	printf ("  Size: %ld MB in %d Sectors\n",
+		info->size >> 20, info->sector_count);
+
+	printf ("  Sector Start Addresses:");
+	for (i = 0; i < info->sector_count; i++) {
+		if ((i % 5) == 0) {
+			printf ("\n   ");
+		}
+		printf (" %08lX%s", info->start[i],
+			info->protect[i] ? " (RO)" : "     ");
+	}
+	printf ("\n");
+
+      Done:;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+int flash_erase (flash_info_t * info, int s_first, int s_last)
+{
+	ushort result;
+	int iflag, cflag, prot, sect;
+	int rc = ERR_OK;
+	int chip;
+
+	/* first look for protection bits */
+
+	if (info->flash_id == FLASH_UNKNOWN)
+		return ERR_UNKNOWN_FLASH_TYPE;
+
+	if ((s_first < 0) || (s_first > s_last)) {
+		return ERR_INVAL;
+	}
+
+	if ((info->flash_id & FLASH_VENDMASK) !=
+	    (AMD_MANUFACT & FLASH_VENDMASK)) {
+		return ERR_UNKNOWN_FLASH_VENDOR;
+	}
+
+	prot = 0;
+	for (sect = s_first; sect <= s_last; ++sect) {
+		if (info->protect[sect]) {
+			prot++;
+		}
+	}
+	if (prot)
+		return ERR_PROTECTED;
+
+	/*
+	 * Disable interrupts which might cause a timeout
+	 * here. Remember that our exception vectors are
+	 * at address 0 in the flash, and we don't want a
+	 * (ticker) exception to happen while the flash
+	 * chip is in programming mode.
+	 */
+	cflag = icache_status ();
+	icache_disable ();
+	iflag = disable_interrupts ();
+
+	/* Start erase on unprotected sectors */
+	for (sect = s_first; sect <= s_last && !ctrlc (); sect++) {
+		printf ("Erasing sector %2d ... ", sect);
+
+		/* arm simple, non interrupt dependent timer */
+		reset_timer_masked ();
+
+		if (info->protect[sect] == 0) {	/* not protected */
+			vu_short *addr = (vu_short *) (info->start[sect]);
+
+			MEM_FLASH_ADDR1 = CMD_UNLOCK1;
+			MEM_FLASH_ADDR2 = CMD_UNLOCK2;
+			MEM_FLASH_ADDR1 = CMD_ERASE_SETUP;
+
+			MEM_FLASH_ADDR1 = CMD_UNLOCK1;
+			MEM_FLASH_ADDR2 = CMD_UNLOCK2;
+			*addr = CMD_ERASE_CONFIRM;
+
+			/* wait until flash is ready */
+			chip = 0;
+
+			do {
+				result = *addr;
+
+				/* check timeout */
+				if (get_timer_masked () >
+				    CFG_FLASH_ERASE_TOUT) {
+					MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
+					chip = TMO;
+					break;
+				}
+
+				if (!chip
+				    && (result & 0xFFFF) & BIT_ERASE_DONE)
+					chip = READY;
+
+				if (!chip
+				    && (result & 0xFFFF) & BIT_PROGRAM_ERROR)
+					chip = ERR;
+
+			} while (!chip);
+
+			MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
+
+			if (chip == ERR) {
+				rc = ERR_PROG_ERROR;
+				goto outahere;
+			}
+			if (chip == TMO) {
+				rc = ERR_TIMOUT;
+				goto outahere;
+			}
+
+			printf ("ok.\n");
+		} else {	/* it was protected */
+
+			printf ("protected!\n");
+		}
+	}
+
+	if (ctrlc ())
+		printf ("User Interrupt!\n");
+
+      outahere:
+	/* allow flash to settle - wait 10 ms */
+	udelay_masked (10000);
+
+	if (iflag)
+		enable_interrupts ();
+
+	if (cflag)
+		icache_enable ();
+
+	return rc;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash
+ */
+
+volatile static int write_hword (flash_info_t * info, ulong dest, ushort data)
+{
+	vu_short *addr = (vu_short *) dest;
+	ushort result;
+	int rc = ERR_OK;
+	int cflag, iflag;
+	int chip;
+
+	/*
+	 * Check if Flash is (sufficiently) erased
+	 */
+	result = *addr;
+	if ((result & data) != data)
+		return ERR_NOT_ERASED;
+
+
+	/*
+	 * Disable interrupts which might cause a timeout
+	 * here. Remember that our exception vectors are
+	 * at address 0 in the flash, and we don't want a
+	 * (ticker) exception to happen while the flash
+	 * chip is in programming mode.
+	 */
+	cflag = icache_status ();
+	icache_disable ();
+	iflag = disable_interrupts ();
+
+	MEM_FLASH_ADDR1 = CMD_UNLOCK1;
+	MEM_FLASH_ADDR2 = CMD_UNLOCK2;
+	MEM_FLASH_ADDR1 = CMD_UNLOCK_BYPASS;
+	*addr = CMD_PROGRAM;
+	*addr = data;
+
+	/* arm simple, non interrupt dependent timer */
+	reset_timer_masked ();
+
+	/* wait until flash is ready */
+	chip = 0;
+	do {
+		result = *addr;
+
+		/* check timeout */
+		if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
+			chip = ERR | TMO;
+			break;
+		}
+		if (!chip && ((result & 0x80) == (data & 0x80)))
+			chip = READY;
+
+		if (!chip && ((result & 0xFFFF) & BIT_PROGRAM_ERROR)) {
+			result = *addr;
+
+			if ((result & 0x80) == (data & 0x80))
+				chip = READY;
+			else
+				chip = ERR;
+		}
+
+	} while (!chip);
+
+	*addr = CMD_READ_ARRAY;
+
+	if (chip == ERR || *addr != data)
+		rc = ERR_PROG_ERROR;
+
+	if (iflag)
+		enable_interrupts ();
+
+	if (cflag)
+		icache_enable ();
+
+	return rc;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash.
+ */
+
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+	ulong cp, wp;
+	int l;
+	int i, rc;
+	ushort data;
+
+	wp = (addr & ~1);	/* get lower word aligned address */
+
+	/*
+	 * handle unaligned start bytes
+	 */
+	if ((l = addr - wp) != 0) {
+		data = 0;
+		for (i = 0, cp = wp; i < l; ++i, ++cp) {
+			data = (data >> 8) | (*(uchar *) cp << 8);
+		}
+		for (; i < 2 && cnt > 0; ++i) {
+			data = (data >> 8) | (*src++ << 8);
+			--cnt;
+			++cp;
+		}
+		for (; cnt == 0 && i < 2; ++i, ++cp) {
+			data = (data >> 8) | (*(uchar *) cp << 8);
+		}
+
+		if ((rc = write_hword (info, wp, data)) != 0) {
+			return (rc);
+		}
+		wp += 2;
+	}
+
+	/*
+	 * handle word aligned part
+	 */
+	while (cnt >= 2) {
+		data = *((vu_short *) src);
+		if ((rc = write_hword (info, wp, data)) != 0) {
+			return (rc);
+		}
+		src += 2;
+		wp += 2;
+		cnt -= 2;
+	}
+
+	if (cnt == 0) {
+		return ERR_OK;
+	}
+
+	/*
+	 * handle unaligned tail bytes
+	 */
+	data = 0;
+	for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) {
+		data = (data >> 8) | (*src++ << 8);
+		--cnt;
+	}
+	for (; i < 2; ++i, ++cp) {
+		data = (data >> 8) | (*(uchar *) cp << 8);
+	}
+
+	return write_hword (info, wp, data);
+}
diff --git a/board/sbc2410x/lowlevel_init.S b/board/sbc2410x/lowlevel_init.S
new file mode 100644
index 0000000000..3df63cdae9
--- /dev/null
+++ b/board/sbc2410x/lowlevel_init.S
@@ -0,0 +1,163 @@
+/*
+ * Memory Setup stuff - taken from blob memsetup.S
+ *
+ * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and
+ *                     Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl)
+ *
+ * Modified for the Samsung SMDK2410 by
+ * (C) Copyright 2002
+ * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
+ *
+ * Modified for the friendly-arm SBC-2410X by
+ * (C) Copyright 2005
+ * JinHua Luo, GuangDong Linux Center, <luo.jinhua@gd-linux.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+
+/*
+ * Taken from linux/arch/arm/boot/compressed/head-s3c2410.S
+ *
+ * Copyright (C) 2002 Samsung Electronics SW.LEE  <hitchcar@sec.samsung.com>
+ */
+
+#define BWSCON	0x48000000
+
+/* BWSCON */
+#define DW8			(0x0)
+#define DW16			(0x1)
+#define DW32			(0x2)
+#define WAIT			(0x1<<2)
+#define UBLB			(0x1<<3)
+
+#define B1_BWSCON		(DW16)
+#define B2_BWSCON		(DW16)
+#define B3_BWSCON		(DW16 + WAIT + UBLB)
+#define B4_BWSCON		(DW16)
+#define B5_BWSCON		(DW16)
+#define B6_BWSCON		(DW32)
+#define B7_BWSCON		(DW32)
+
+#define B0_Tacs			0x0
+#define B0_Tcos			0x0
+#define B0_Tacc			0x7
+#define B0_Tcoh			0x0
+#define B0_Tah			0x0
+#define B0_Tacp			0x0
+#define B0_PMC			0x0
+
+#define B1_Tacs			0x0
+#define B1_Tcos			0x0
+#define B1_Tacc			0x7
+#define B1_Tcoh			0x0
+#define B1_Tah			0x0
+#define B1_Tacp			0x0
+#define B1_PMC			0x0
+
+#define B2_Tacs			0x0
+#define B2_Tcos			0x0
+#define B2_Tacc			0x7
+#define B2_Tcoh			0x0
+#define B2_Tah			0x0
+#define B2_Tacp			0x0
+#define B2_PMC			0x0
+
+#define B3_Tacs			0xc
+#define B3_Tcos			0x7
+#define B3_Tacc			0xf
+#define B3_Tcoh			0x1
+#define B3_Tah			0x0
+#define B3_Tacp			0x0
+#define B3_PMC			0x0
+
+#define B4_Tacs			0x0
+#define B4_Tcos			0x0
+#define B4_Tacc			0x7
+#define B4_Tcoh			0x0
+#define B4_Tah			0x0
+#define B4_Tacp			0x0
+#define B4_PMC			0x0
+
+#define B5_Tacs			0xc
+#define B5_Tcos			0x7
+#define B5_Tacc			0xf
+#define B5_Tcoh			0x1
+#define B5_Tah			0x0
+#define B5_Tacp			0x0
+#define B5_PMC			0x0
+
+#define B6_MT			0x3	/* SDRAM */
+#define B6_Trcd			0x1
+#define B6_SCAN			0x1	/* 9bit */
+
+#define B7_MT			0x3	/* SDRAM */
+#define B7_Trcd			0x1	/* 3clk */
+#define B7_SCAN			0x1	/* 9bit */
+
+/* REFRESH parameter */
+#define REFEN			0x1	/* Refresh enable */
+#define TREFMD			0x0	/* CBR(CAS before RAS)/Auto refresh */
+#define Trp			0x0	/* 2clk */
+#define Trc			0x3	/* 7clk */
+#define Tchr			0x2	/* 3clk */
+#define REFCNT			0x0459
+/**************************************/
+
+_TEXT_BASE:
+	.word	TEXT_BASE
+
+.globl lowlevel_init
+lowlevel_init:
+	/* memory control configuration */
+	/* make r0 relative the current location so that it */
+	/* reads SMRDATA out of FLASH rather than memory ! */
+	ldr     r0, =SMRDATA
+	ldr	r1, _TEXT_BASE
+	sub	r0, r0, r1
+	ldr	r1, =BWSCON	/* Bus Width Status Controller */
+	add     r2, r0, #13*4
+0:
+	ldr     r3, [r0], #4
+	str     r3, [r1], #4
+	cmp     r2, r0
+	bne     0b
+
+	/* everything is fine now */
+	mov	pc, lr
+
+	.ltorg
+/* the literal pools origin */
+
+SMRDATA:
+    .word (0+(B1_BWSCON<<4)+(B2_BWSCON<<8)+(B3_BWSCON<<12)+(B4_BWSCON<<16)+(B5_BWSCON<<20)+(B6_BWSCON<<24)+(B7_BWSCON<<28))
+    .word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC))
+    .word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC))
+    .word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC))
+    .word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC))
+    .word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC))
+    .word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC))
+    .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN))
+    .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN))
+    .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT)
+    .word 0xb2
+    .word 0x30
+    .word 0x30
diff --git a/board/sbc2410x/sbc2410x.c b/board/sbc2410x/sbc2410x.c
new file mode 100644
index 0000000000..7030985b29
--- /dev/null
+++ b/board/sbc2410x/sbc2410x.c
@@ -0,0 +1,183 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
+ *
+ * (C) Copyright 2005
+ * JinHua Luo, GuangDong Linux Center, <luo.jinhua@gd-linux.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <s3c2410.h>
+
+#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+#include <linux/mtd/nand.h>
+#endif
+
+/* ------------------------------------------------------------------------- */
+
+#define FCLK_SPEED 1
+
+#if FCLK_SPEED==0		/* Fout = 203MHz, Fin = 12MHz for Audio */
+#define M_MDIV	0xC3
+#define M_PDIV	0x4
+#define M_SDIV	0x1
+#elif FCLK_SPEED==1		/* Fout = 202.8MHz */
+#define M_MDIV	0x5c
+#define M_PDIV	0x4
+#define M_SDIV	0x0
+#endif
+
+#define USB_CLOCK 1
+
+#if USB_CLOCK==0
+#define U_M_MDIV	0xA1
+#define U_M_PDIV	0x3
+#define U_M_SDIV	0x1
+#elif USB_CLOCK==1
+#define U_M_MDIV	0x48
+#define U_M_PDIV	0x3
+#define U_M_SDIV	0x2
+#endif
+
+static inline void delay (unsigned long loops)
+{
+	__asm__ volatile ("1:\n"
+			  "subs %0, %1, #1\n"
+			  "bne 1b":"=r" (loops):"0" (loops));
+}
+
+/*
+ * Miscellaneous platform dependent initialisations
+ */
+
+int board_init (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+	S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
+	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+
+	/* to reduce PLL lock time, adjust the LOCKTIME register */
+	clk_power->LOCKTIME = 0xFFFFFF;
+
+	/* configure MPLL */
+	clk_power->MPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV);
+
+	/* some delay between MPLL and UPLL */
+	delay (4000);
+
+	/* configure UPLL */
+	clk_power->UPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV);
+
+	/* some delay between MPLL and UPLL */
+	delay (8000);
+
+	/* set up the I/O ports */
+	gpio->GPACON = 0x007FFFFF;
+	gpio->GPBCON = 0x00044556;
+	gpio->GPBUP = 0x000007FF;
+	gpio->GPCCON = 0xAAAAAAAA;
+	gpio->GPCUP = 0x0000FFFF;
+	gpio->GPDCON = 0xAAAAAAAA;
+	gpio->GPDUP = 0x0000FFFF;
+	gpio->GPECON = 0xAAAAAAAA;
+	gpio->GPEUP = 0x0000FFFF;
+	gpio->GPFCON = 0x000055AA;
+	gpio->GPFUP = 0x000000FF;
+	gpio->GPGCON = 0xFF95FF3A;
+	gpio->GPGUP = 0x0000FFFF;
+	gpio->GPHCON = 0x0016FAAA;
+	gpio->GPHUP = 0x000007FF;
+
+	gpio->EXTINT0=0x22222222;
+	gpio->EXTINT1=0x22222222;
+	gpio->EXTINT2=0x22222222;
+
+	/* arch number of SMDK2410-Board */
+	gd->bd->bi_arch_number = MACH_TYPE_SMDK2410;
+
+	/* adress of boot parameters */
+	gd->bd->bi_boot_params = 0x30000100;
+
+	icache_enable();
+	dcache_enable();
+
+	return 0;
+}
+
+int dram_init (void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+
+	return 0;
+}
+
+#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+extern ulong nand_probe(ulong physadr);
+
+static inline void NF_Reset(void)
+{
+	int i;
+
+	NF_SetCE(NFCE_LOW);
+	NF_Cmd(0xFF);		/* reset command */
+	for(i = 0; i < 10; i++);	/* tWB = 100ns. */
+	NF_WaitRB();		/* wait 200~500us; */
+	NF_SetCE(NFCE_HIGH);
+}
+
+static inline void NF_Init(void)
+{
+#if 1
+#define TACLS   0
+#define TWRPH0  3
+#define TWRPH1  0
+#else
+#define TACLS   0
+#define TWRPH0  4
+#define TWRPH1  2
+#endif
+
+	NF_Conf((1<<15)|(0<<14)|(0<<13)|(1<<12)|(1<<11)|(TACLS<<8)|(TWRPH0<<4)|(TWRPH1<<0));
+	/*nand->NFCONF = (1<<15)|(1<<14)|(1<<13)|(1<<12)|(1<<11)|(TACLS<<8)|(TWRPH0<<4)|(TWRPH1<<0); */
+	/* 1  1    1     1,   1      xxx,  r xxx,   r xxx */
+	/* En 512B 4step ECCR nFCE=H tACLS   tWRPH0   tWRPH1 */
+
+	NF_Reset();
+}
+
+void nand_init(void)
+{
+	S3C2410_NAND * const nand = S3C2410_GetBase_NAND();
+
+	NF_Init();
+#ifdef DEBUG
+	printf("NAND flash probing at 0x%.8lX\n", (ulong)nand);
+#endif
+	printf ("%4lu MB\n", nand_probe((ulong)nand) >> 20);
+}
+#endif /* CONFIG_COMMANDS & CFG_CMD_NAND */
diff --git a/board/sbc2410x/u-boot.lds b/board/sbc2410x/u-boot.lds
new file mode 100644
index 0000000000..76df6b2af1
--- /dev/null
+++ b/board/sbc2410x/u-boot.lds
@@ -0,0 +1,56 @@
+/*
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+	. = 0x00000000;
+
+	. = ALIGN(4);
+	.text      :
+	{
+	  cpu/arm920t/start.o	(.text)
+	  *(.text)
+	}
+
+	. = ALIGN(4);
+	.rodata : { *(.rodata) }
+
+	. = ALIGN(4);
+	.data : { *(.data) }
+
+	. = ALIGN(4);
+	.got : { *(.got) }
+
+	__u_boot_cmd_start = .;
+	.u_boot_cmd : { *(.u_boot_cmd) }
+	__u_boot_cmd_end = .;
+
+	. = ALIGN(4);
+	__bss_start = .;
+	.bss : { *(.bss) }
+	_end = .;
+}
diff --git a/board/spc1920/Makefile b/board/spc1920/Makefile
new file mode 100644
index 0000000000..47afef7e6a
--- /dev/null
+++ b/board/spc1920/Makefile
@@ -0,0 +1,40 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	= $(BOARD).o
+
+$(LIB):	.depend $(OBJS)
+	$(AR) crv $@ $(OBJS)
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/board/spc1920/config.mk b/board/spc1920/config.mk
new file mode 100644
index 0000000000..e361694faa
--- /dev/null
+++ b/board/spc1920/config.mk
@@ -0,0 +1,35 @@
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# Modified by, Yuli Barcohen, Arabella Software Ltd., yuli@arabellasw.com
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# Motorola old MPC821/860ADS, MPC8xxFADS, new MPC866ADS, and
+# MPC885ADS boards
+#
+
+#TEXT_BASE = 0xFE000000
+TEXT_BASE = 0xFFF00000
+PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/spc1920
+HOST_CFLAGS += -I$(TOPDIR)/board/spc1920
+HOST_ENVIRO_CFLAGS += -I$(TOPDIR)/board/spc1920
diff --git a/board/spc1920/pld.h b/board/spc1920/pld.h
new file mode 100644
index 0000000000..3254f820c1
--- /dev/null
+++ b/board/spc1920/pld.h
@@ -0,0 +1,14 @@
+#ifndef __PLD_H__
+#define __PLD_H__
+
+typedef struct spc1920_pld {
+	uchar com1_en;
+	uchar dsp_reset;
+	uchar dsp_hpi_on;
+	uchar codec_dsp_power_en;
+	uchar clk2_en;
+	uchar clk3_select;
+	uchar clk4_select;
+} spc1920_pld_t;
+
+#endif /* __PLD_H__ */
diff --git a/board/spc1920/spc1920.c b/board/spc1920/spc1920.c
new file mode 100644
index 0000000000..028f4c635d
--- /dev/null
+++ b/board/spc1920/spc1920.c
@@ -0,0 +1,236 @@
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Modified by, Yuli Barcohen, Arabella Software Ltd., yuli@arabellasw.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <common.h>
+#include <mpc8xx.h>
+#include "pld.h"
+
+#define	_NOT_USED_	0xFFFFFFFF
+/* #define debug(fmt,args...)     printf (fmt ,##args) */
+
+static long int dram_size (long int, long int *, long int);
+
+const uint sdram_table[] = {
+	/*
+	 * Single Read. (Offset 0 in UPMB RAM)
+	 */
+	0x1F07FC04, 0xEEAEFC04, 0x11ADFC04, 0xEFBBBC00,
+	0x1FF77C47, /* last */
+	/*
+	 * SDRAM Initialization (offset 5 in UPMB RAM)
+	 *
+	 * This is no UPM entry point. The following definition uses
+	 * the remaining space to establish an initialization
+	 * sequence, which is executed by a RUN command.
+	 *
+	 */
+	0x1FF77C34, 0xEFEABC34, 0x1FB57C35, /* last */
+	/*
+	 * Burst Read. (Offset 8 in UPMB RAM)
+	 */
+	0x1F07FC04, 0xEEAEFC04, 0x10ADFC04, 0xF0AFFC00,
+	0xF0AFFC00, 0xF1AFFC00, 0xEFBBBC00, 0x1FF77C47, /* last */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/*
+	 * Single Write. (Offset 18 in UPMB RAM)
+	 */
+	0x1F07FC04, 0xEEAEBC00, 0x01B93C04, 0x1FF77C47, /* last */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/*
+	 * Burst Write. (Offset 20 in UPMB RAM)
+	 */
+	0x1F07FC04, 0xEEAEBC00, 0x10AD7C00, 0xF0AFFC00,
+	0xF0AFFC00, 0xE1BBBC04, 0x1FF77C47, /* last */
+	_NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/*
+	 * Refresh  (Offset 30 in UPMB RAM)
+	 */
+	0x1FF5FC84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04,
+	0xFFFFFC84, 0xFFFFFC07, /* last */
+	_NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/*
+	 * Exception. (Offset 3c in UPMB RAM)
+	 */
+	0x7FFFFC07, /* last */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_,
+};
+
+long int initdram (int board_type)
+{
+	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+	volatile memctl8xx_t *memctl = &immr->im_memctl;
+	/* volatile spc1920_pld_t *pld = (spc1920_pld_t *) CFG_SPC1920_PLD_BASE; */
+
+	long int size_b0;
+	long int size8, size9;
+	int i;
+
+	/*
+	 * Configure UPMB for SDRAM
+	 */
+	upmconfig (UPMB, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint));
+
+	udelay(100);
+
+	memctl->memc_mptpr = CFG_MPTPR;
+
+	/* burst length=4, burst type=sequential, CAS latency=2 */
+	memctl->memc_mar = CFG_MAR;
+
+	/*
+	 * Map controller bank 1 to the SDRAM bank at preliminary address.
+	 */
+	memctl->memc_or1 = CFG_OR1_PRELIM;
+	memctl->memc_br1 = CFG_BR1_PRELIM;
+
+	/* initialize memory address register */
+	memctl->memc_mbmr = CFG_MBMR_8COL; /* refresh not enabled yet */
+
+	/* mode initialization (offset 5) */
+	udelay (200);				/* 0x80006105 */
+	memctl->memc_mcr = MCR_OP_RUN | MCR_UPM_B | MCR_MB_CS1 | MCR_MLCF (1) | MCR_MAD (0x05);
+
+	/* run 2 refresh sequence with 4-beat refresh burst (offset 0x30) */
+	udelay (1);				/* 0x80006130 */
+	memctl->memc_mcr = MCR_OP_RUN | MCR_UPM_B | MCR_MB_CS1 | MCR_MLCF (1) | MCR_MAD (0x30);
+	udelay (1);				/* 0x80006130 */
+	memctl->memc_mcr = MCR_OP_RUN | MCR_UPM_B | MCR_MB_CS1 | MCR_MLCF (1) | MCR_MAD (0x30);
+	udelay (1);				/* 0x80006106 */
+	memctl->memc_mcr = MCR_OP_RUN | MCR_UPM_B | MCR_MB_CS1 | MCR_MLCF (1) | MCR_MAD (0x06);
+
+	memctl->memc_mbmr |= MBMR_PTBE;	/* refresh enabled */
+
+	udelay (200);
+
+	/* Need at least 10 DRAM accesses to stabilize */
+	for (i = 0; i < 10; ++i) {
+		volatile unsigned long *addr =
+			(volatile unsigned long *) CFG_SDRAM_BASE;
+		unsigned long val;
+
+		val = *(addr + i);
+		*(addr + i) = val;
+	}
+
+	/*
+	 * Check Bank 0 Memory Size for re-configuration
+	 *
+	 * try 8 column mode
+	 */
+	size8 = dram_size (CFG_MBMR_8COL, (long *)CFG_SDRAM_BASE, SDRAM_MAX_SIZE);
+
+	udelay (1000);
+
+	/*
+	 * try 9 column mode
+	 */
+	size9 = dram_size (CFG_MBMR_9COL, (long *)CFG_SDRAM_BASE, SDRAM_MAX_SIZE);
+
+	if (size8 < size9) {		/* leave configuration at 9 columns */
+		size_b0 = size9;
+		memctl->memc_mbmr = CFG_MBMR_9COL | MBMR_PTBE;
+		udelay (500);
+	} else {			/* back to 8 columns            */
+		size_b0 = size8;
+		memctl->memc_mbmr = CFG_MBMR_8COL | MBMR_PTBE;
+		udelay (500);
+	}
+
+	/*
+	 * Final mapping:
+	 */
+
+	memctl->memc_or1 = ((-size_b0) & 0xFFFF0000) |
+			OR_CSNT_SAM | OR_G5LS | SDRAM_TIMING;
+	memctl->memc_br1 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMB | BR_V;
+	udelay (1000);
+
+
+	/* PLD Setup */
+	memctl->memc_or5 = CFG_OR5_PRELIM;
+	memctl->memc_br5 = CFG_BR5_PRELIM;
+	udelay(1000);
+
+	return (size_b0);
+}
+
+/*
+ * Check memory range for valid RAM. A simple memory test determines
+ * the actually available RAM size between addresses `base' and
+ * `base + maxsize'. Some (not all) hardware errors are detected:
+ * - short between address lines
+ * - short between data lines
+ */
+static long int dram_size (long int mbmr_value, long int *base,
+			   long int maxsize)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile memctl8xx_t *memctl = &immap->im_memctl;
+
+	memctl->memc_mbmr = mbmr_value;
+
+	return (get_ram_size (base, maxsize));
+}
+
+
+/************* other stuff ******************/
+
+
+int board_early_init_f(void)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+
+
+	/* Turn on LED PD9 */
+	immap->im_ioport.iop_pdpar &= ~(0x0040);
+	immap->im_ioport.iop_pddir |= 0x0040;
+	immap->im_ioport.iop_pddat |= 0x0040;
+
+	/* Enable PD10 (COM2_EN) */
+	immap->im_ioport.iop_pdpar &= ~0x0020;
+	immap->im_ioport.iop_pddir &= ~0x4000;
+	immap->im_ioport.iop_pddir |= 0x0020;
+	immap->im_ioport.iop_pddat |= 0x0020;
+
+
+#ifdef CFG_SMC1_PLD_CLK4 /* SMC1 uses CLK4 from PLD */
+	immap->im_cpm.cp_simode |= 0x7000;
+	immap->im_cpm.cp_simode &= ~(0x8000);
+#endif
+
+	return 0;
+}
+
+
+int checkboard (void)
+{
+	puts("Board: SPC1920\n");
+	return 0;
+}
diff --git a/board/spc1920/u-boot.lds b/board/spc1920/u-boot.lds
new file mode 100644
index 0000000000..d526d1d07d
--- /dev/null
+++ b/board/spc1920/u-boot.lds
@@ -0,0 +1,144 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)	}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)	}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)	}
+  .rela.got      : { *(.rela.got)	}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)	}
+  .rela.bss      : { *(.rela.bss)	}
+  .rel.plt       : { *(.rel.plt)	}
+  .rela.plt      : { *(.rela.plt)	}
+  .init          : { *(.init)		}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/mpc8xx/start.o		(.text)
+    cpu/mpc8xx/traps.o		(.text)
+    common/dlmalloc.o		(.text)
+    lib_ppc/ppcstring.o		(.text)
+    lib_generic/vsprintf.o	(.text)
+    lib_generic/crc32.o		(.text)
+    lib_generic/zlib.o		(.text)
+    lib_ppc/cache.o		(.text)
+    lib_ppc/time.o		(.text)
+
+    . = DEFINED(env_offset) ? env_offset : .;
+    common/environment.o	(.ppcenv)
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+    *(.eh_frame)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = .;
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  . = .;
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
diff --git a/board/tqm5200/Makefile b/board/tqm5200/Makefile
index c234332566..9a1ea4873e 100644
--- a/board/tqm5200/Makefile
+++ b/board/tqm5200/Makefile
@@ -25,8 +25,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= lib$(BOARD).a
 
-#OBJS	:= $(BOARD).o flash.o
-OBJS	:= $(BOARD).o cmd_stk52xx.o
+OBJS	:= $(BOARD).o cmd_stk52xx.o cmd_tb5200.o
 
 $(LIB):	$(OBJS) $(SOBJS)
 	$(AR) crv $@ $(OBJS)
diff --git a/board/tqm5200/cmd_stk52xx.c b/board/tqm5200/cmd_stk52xx.c
index 8b9057f503..c37d4c662e 100755
--- a/board/tqm5200/cmd_stk52xx.c
+++ b/board/tqm5200/cmd_stk52xx.c
@@ -22,7 +22,7 @@
  */
 
 /*
- * SKT52XX specific functions
+ * STK52XX specific functions
  */
 /*#define DEBUG*/
 
@@ -30,6 +30,7 @@
 #include <command.h>
 
 #if (CONFIG_COMMANDS & CFG_CMD_BSP)
+#if defined (CONFIG_STK52XX)
 
 #define DEFAULT_VOL	45
 #define DEFAULT_FREQ	500
@@ -60,7 +61,6 @@ static int spi_transmit(unsigned char data);
 static void pcm1772_write_reg(unsigned char addr, unsigned char data);
 static void set_attenuation(unsigned char attenuation);
 
-#ifdef CONFIG_STK52XX
 static void spi_init(void)
 {
 	struct mpc5xxx_spi *spi = (struct mpc5xxx_spi*)MPC5XXX_SPI;
@@ -1209,7 +1209,7 @@ U_BOOT_CMD(
 	fkt ,	4,	1,	cmd_fkt,
 	"fkt     - Function test routines\n",
 	"led number on/off\n"
-	"     - 'number's like printed on SKT52XX board\n"
+	"     - 'number's like printed on STK52XX board\n"
 	"fkt can\n"
 	"     - loopback plug for X83 required\n"
 	"fkt rs232 number\n"
diff --git a/board/tqm5200/cmd_tb5200.c b/board/tqm5200/cmd_tb5200.c
new file mode 100644
index 0000000000..8784b1f800
--- /dev/null
+++ b/board/tqm5200/cmd_tb5200.c
@@ -0,0 +1,104 @@
+/*
+ * (C) Copyright 2005 - 2006
+ * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * TB5200 specific functions
+ */
+/*#define DEBUG*/
+
+#include <common.h>
+#include <command.h>
+
+#if (CONFIG_COMMANDS & CFG_CMD_BSP)
+#if defined (CONFIG_TB5200)
+
+#define SM501_PANEL_DISPLAY_CONTROL	0x00080000UL
+
+static void led_init(void)
+{
+	struct mpc5xxx_gpt_0_7 *gpt = (struct mpc5xxx_gpt_0_7 *)MPC5XXX_GPT;
+
+	/* configure timer 4 for simple GPIO output */
+	gpt->gpt4.emsr |=  0x00000024;
+}
+
+int cmd_led(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	struct mpc5xxx_gpt_0_7 *gpt = (struct mpc5xxx_gpt_0_7 *)MPC5XXX_GPT;
+
+	led_init();
+
+	if (strcmp (argv[1], "on") == 0) {
+		debug ("switch status LED on\n");
+		gpt->gpt4.emsr |=  (1 << 4);
+	} else if (strcmp (argv[1], "off") == 0) {
+		debug ("switch status LED off\n");
+		gpt->gpt4.emsr &=  ~(1 << 4);
+	} else {
+		printf ("Usage:\nled on/off\n");
+		return 1;
+	}
+
+	return 0;
+}
+
+static void sm501_backlight (unsigned int state)
+{
+	if (state == 1) {
+		*(vu_long *)(SM501_MMIO_BASE+SM501_PANEL_DISPLAY_CONTROL) |=
+			(1 << 26) | (1 << 27);
+	} else if (state == 0)
+		*(vu_long *)(SM501_MMIO_BASE+SM501_PANEL_DISPLAY_CONTROL) &=
+			~((1 << 26) | (1 << 27));
+}
+
+int cmd_backlight(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+	if (strcmp (argv[1], "on") == 0) {
+		debug ("switch backlight on\n");
+		sm501_backlight (1);
+	} else if (strcmp (argv[1], "off") == 0) {
+		debug ("switch backlight off\n");
+		sm501_backlight (0);
+	} else {
+		printf ("Usage:\nbacklight on/off\n");
+		return 1;
+	}
+
+	return 0;
+}
+
+U_BOOT_CMD(
+	led ,	2,	1,	cmd_led,
+	"led     - switch status LED on or off\n",
+	"on/off\n"
+);
+
+U_BOOT_CMD(
+	backlight ,	2,	1,	cmd_backlight,
+	"backlight - switch backlight on or off\n",
+	"on/off\n"
+	);
+
+#endif /* CONFIG_STK52XX */
+#endif /* CFG_CMD_BSP */
diff --git a/board/tqm5200/config.mk b/board/tqm5200/config.mk
index 585a99a8c7..84ddee80d9 100644
--- a/board/tqm5200/config.mk
+++ b/board/tqm5200/config.mk
@@ -28,12 +28,17 @@
 #
 #	0xFC000000   boot low (standard configuration with room for max 64 MByte
 #		     Flash ROM)
+#	0xFFF00000   boot high (for a backup copy of U-Boot)
 #	0x00100000   boot from RAM (for testing only)
 #
 
+sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp
+
 ifndef TEXT_BASE
 ## Standard: boot low
 TEXT_BASE = 0xFC000000
+## For a backup copy of U-Boot at the end of flash: boot high
+# TEXT_BASE = 0xFFF00000
 ## For testing: boot from RAM
 # TEXT_BASE = 0x00100000
 endif
diff --git a/board/tqm5200/flash.c b/board/tqm5200/flash.c
deleted file mode 100644
index af4d78a956..0000000000
--- a/board/tqm5200/flash.c
+++ /dev/null
@@ -1,497 +0,0 @@
-/*
- * (C) Copyright 2003-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2004
- * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-/*
- * CPU to flash interface is 32-bit, so make declaration accordingly
- */
-typedef unsigned long FLASH_PORT_WIDTH;
-typedef volatile unsigned long FLASH_PORT_WIDTHV;
-
-#define FPW	FLASH_PORT_WIDTH
-#define FPWV	FLASH_PORT_WIDTHV
-
-#define FLASH_CYCLE1	0x0555
-#define FLASH_CYCLE2	0x02aa
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size(FPWV *addr, flash_info_t *info);
-static void flash_reset(flash_info_t *info);
-static int write_word_amd(flash_info_t *info, FPWV *dest, FPW data);
-static flash_info_t *flash_get_info(ulong base);
-
-/*-----------------------------------------------------------------------
- * flash_init()
- *
- * sets up flash_info and returns size of FLASH (bytes)
- */
-unsigned long flash_init (void)
-{
-	unsigned long size = 0;
-	extern void flash_preinit(void);
-	ulong flashbase = CFG_FLASH_BASE;
-
-	flash_preinit();
-
-	/* Init: no FLASHes known */
-	memset(&flash_info[0], 0, sizeof(flash_info_t));
-
-	flash_info[0].size =
-		flash_get_size((FPW *)flashbase, &flash_info[0]);
-
-	size = flash_info[0].size;
-
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
-	/* monitor protection ON by default */
-	flash_protect(FLAG_PROTECT_SET,
-		      CFG_MONITOR_BASE,
-		      CFG_MONITOR_BASE+monitor_flash_len-1,
-		      flash_get_info(CFG_MONITOR_BASE));
-#endif
-
-#ifdef	CFG_ENV_IS_IN_FLASH
-	/* ENV protection ON by default */
-	flash_protect(FLAG_PROTECT_SET,
-		      CFG_ENV_ADDR,
-		      CFG_ENV_ADDR+CFG_ENV_SIZE-1,
-		      flash_get_info(CFG_ENV_ADDR));
-#endif
-
-	return size ? size : 1;
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_reset(flash_info_t *info)
-{
-	FPWV *base = (FPWV *)(info->start[0]);
-
-	/* Put FLASH back in read mode */
-	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL)
-		*base = (FPW)0x00FF00FF;	/* Intel Read Mode */
-	else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD)
-		*base = (FPW)0x00F000F0;	/* AMD Read Mode */
-}
-
-/*-----------------------------------------------------------------------
- */
-
-static flash_info_t *flash_get_info(ulong base)
-{
-	int i;
-	flash_info_t * info;
-
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; i ++) {
-		info = & flash_info[i];
-		if (info->size && info->start[0] <= base &&
-		    base <= info->start[0] + info->size - 1)
-			break;
-	}
-
-	return i == CFG_MAX_FLASH_BANKS ? 0 : info;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-void flash_print_info (flash_info_t *info)
-{
-	int i;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf ("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_AMD:	printf ("AMD ");		break;
-	case FLASH_MAN_BM:	printf ("BRIGHT MICRO ");	break;
-	case FLASH_MAN_FUJ:	printf ("FUJITSU ");		break;
-	case FLASH_MAN_SST:	printf ("SST ");		break;
-	case FLASH_MAN_STM:	printf ("STM ");		break;
-	case FLASH_MAN_INTEL:	printf ("INTEL ");		break;
-	default:		printf ("Unknown Vendor ");	break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_AMLV128U:
-		printf ("AM29LV128ML (128Mbit, uniform sector size)\n");
-		break;
-	case FLASH_AM160B:
-		printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
-		break;
-	default:
-		printf ("Unknown Chip Type\n");
-		break;
-	}
-
-	printf ("  Size: %ld MB in %d Sectors\n",
-		info->size >> 20,
-		info->sector_count);
-
-	printf ("  Sector Start Addresses:");
-
-	for (i=0; i<info->sector_count; ++i) {
-		if ((i % 5) == 0) {
-			printf ("\n   ");
-		}
-		printf (" %08lX%s",
-			info->start[i],
-			info->protect[i] ? " (RO)" : "     ");
-	}
-	printf ("\n");
-	return;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-ulong flash_get_size (FPWV *addr, flash_info_t *info)
-{
-	int i;
-	ulong base = (ulong)addr;
-
-	/* Write auto select command: read Manufacturer ID */
-	/* Write auto select command sequence and test FLASH answer */
-	addr[FLASH_CYCLE1] = (FPW)0x00AA00AA;	/* for AMD, Intel ignores this */
-	addr[FLASH_CYCLE2] = (FPW)0x00550055;	/* for AMD, Intel ignores this */
-	addr[FLASH_CYCLE1] = (FPW)0x00900090;	/* selects Intel or AMD */
-
-	/* The manufacturer codes are only 1 byte, so just use 1 byte.
-	 * This works for any bus width and any FLASH device width.
-	 */
-	udelay(100);
-	switch (addr[0] & 0xff) {
-
-	case (uchar)AMD_MANUFACT:
-		debug ("Manufacturer: AMD (Spansion)\n");
-		info->flash_id = FLASH_MAN_AMD;
-		break;
-
-	case (uchar)INTEL_MANUFACT:
-		debug ("Manufacturer: Intel (not supported yet)\n");
-		info->flash_id = FLASH_MAN_INTEL;
-		break;
-
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		break;
-	}
-
-	/* Check 16 bits or 32 bits of ID so work on 32 or 16 bit bus. */
-	if (info->flash_id != FLASH_UNKNOWN) switch ((FPW)addr[1]) {
-
-	case (FPW)AMD_ID_LV160B:
-		debug ("Chip: AM29LV160MB\n");
-		info->flash_id += FLASH_AM160B;
-		info->sector_count = 35;
-		info->size = 0x00400000;
-		/*
-		 * The first 4 sectors are 16 kB, 8 kB, 8 kB and 32 kB, all
-		 * the other ones are 64 kB
-		 */
-		info->start[0] = base + 0x00000000;
-		info->start[1] = base + 0x00008000;
-		info->start[2] = base + 0x0000C000;
-		info->start[3] = base + 0x00010000;
-		for( i = 4; i < info->sector_count; i++ )
-			info->start[i] =
-				base + (i * 2 * (64 << 10)) - 0x00060000;
-		break;		/* => 4 MB */
-
-	case AMD_ID_MIRROR:
-		debug ("Mirror Bit flash: addr[14] = %08lX  addr[15] = %08lX\n",
-			addr[14], addr[15]);
-
-		switch(addr[14]) {
-		case AMD_ID_LV128U_2:
-			if (addr[15] != AMD_ID_LV128U_3) {
-				debug ("Chip: AM29LVxxxM -> unknown\n");
-				info->flash_id = FLASH_UNKNOWN;
-				info->sector_count = 0;
-				info->size = 0;
-			} else {
-				debug ("Chip: AM29LV128M\n");
-				info->flash_id += FLASH_AMLV128U;
-				info->sector_count = 256;
-				info->size = 0x02000000;
-				for (i = 0; i < info->sector_count; i++) {
-					info->start[i] = base;
-					base += 0x20000;
-				}
-			}
-			break;	/* => 32 MB	*/
-		default:
-			debug ("Chip: *** unknown ***\n");
-			info->flash_id = FLASH_UNKNOWN;
-			info->sector_count = 0;
-			info->size = 0;
-			break;
-		}
-		break;
-
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-	}
-
-	/* Put FLASH back in read mode */
-	flash_reset(info);
-
-	return (info->size);
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int	flash_erase (flash_info_t *info, int s_first, int s_last)
-{
-	vu_long *addr = (vu_long*)(info->start[0]);
-	int flag, prot, sect, l_sect;
-	ulong start, now, last;
-
-	debug ("flash_erase: first: %d last: %d\n", s_first, s_last);
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN) {
-			printf ("- missing\n");
-		} else {
-			printf ("- no sectors to erase\n");
-		}
-		return 1;
-	}
-
-	if ((info->flash_id == FLASH_UNKNOWN) ||
-	    (info->flash_id > FLASH_AMD_COMP)) {
-		printf ("Can't erase unknown flash type %08lx - aborted\n",
-			info->flash_id);
-		return 1;
-	}
-
-	prot = 0;
-	for (sect=s_first; sect<=s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-
-	if (prot) {
-		printf ("- Warning: %d protected sectors will not be erased!\n",
-			prot);
-	} else {
-		printf ("\n");
-	}
-
-	l_sect = -1;
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-	addr[0x0555] = 0x00AA00AA;
-	addr[0x02AA] = 0x00550055;
-	addr[0x0555] = 0x00800080;
-	addr[0x0555] = 0x00AA00AA;
-	addr[0x02AA] = 0x00550055;
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect<=s_last; sect++) {
-		if (info->protect[sect] == 0) {	/* not protected */
-			addr = (vu_long*)(info->start[sect]);
-			addr[0] = 0x00300030;
-			l_sect = sect;
-		}
-	}
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts();
-
-	/* wait at least 80us - let's wait 1 ms */
-	udelay (1000);
-
-	/*
-	 * We wait for the last triggered sector
-	 */
-	if (l_sect < 0)
-		goto DONE;
-
-	start = get_timer (0);
-	last  = start;
-	addr = (vu_long*)(info->start[l_sect]);
-	while ((addr[0] & 0x00800080) != 0x00800080) {
-		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
-			printf ("Timeout\n");
-			return 1;
-		}
-		/* show that we're waiting */
-		if ((now - last) > 1000) {	/* every second */
-			putc ('.');
-			last = now;
-		}
-	}
-
-DONE:
-	/* reset to read mode */
-	addr = (volatile unsigned long *)info->start[0];
-	addr[0] = 0x00F000F0;	/* reset bank */
-
-	printf (" done\n");
-	return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
-	ulong cp, wp, data;
-	int i, l, rc;
-
-	/*
-	 * Get lower word aligned address. Assumes 32 bit flash bus width.
-	 */
-	wp = (addr & ~3);
-
-	/*
-	 * handle unaligned start bytes
-	 */
-	if ((l = addr - wp) != 0) {
-		data = 0;
-		for (i=0, cp=wp; i<l; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *)cp);
-		}
-		for (; i<4 && cnt>0; ++i) {
-			data = (data << 8) | *src++;
-			--cnt;
-			++cp;
-		}
-		for (; cnt==0 && i<4; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *)cp);
-		}
-
-		if ((rc = write_word_amd(info, (FPW *)wp, data)) != 0) {
-			return (rc);
-		}
-		wp += 4;
-	}
-
-	/*
-	 * handle word aligned part
-	 */
-	while (cnt >= 4) {
-		data = 0;
-		for (i=0; i<4; ++i) {
-			data = (data << 8) | *src++;
-		}
-		if ((rc = write_word_amd(info, (FPW *)wp, data)) != 0) {
-			return (rc);
-		}
-		wp  += 4;
-		cnt -= 4;
-	}
-
-	if (cnt == 0) {
-		return (0);
-	}
-
-	/*
-	 * handle unaligned tail bytes
-	 */
-	data = 0;
-	for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
-		data = (data << 8) | *src++;
-		--cnt;
-	}
-	for (; i<4; ++i, ++cp) {
-		data = (data << 8) | (*(uchar *)cp);
-	}
-
-	return (write_word_amd(info, (FPW *)wp, data));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash for AMD FLASH
- * A word is 16 or 32 bits, whichever the bus width of the flash bank
- * (not an individual chip) is.
- *
- * returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word_amd (flash_info_t *info, FPWV *dest, FPW data)
-{
-	ulong start;
-	int flag;
-	FPWV *base;		/* first address in flash bank	*/
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*dest & data) != data) {
-		return (2);
-	}
-
-	base = (FPWV *)(info->start[0]);
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-	base[FLASH_CYCLE1] = (FPW)0x00AA00AA;	/* unlock */
-	base[FLASH_CYCLE2] = (FPW)0x00550055;	/* unlock */
-	base[FLASH_CYCLE1] = (FPW)0x00A000A0;	/* selects program mode */
-
-	*dest = data;		/* start programming the data	*/
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts();
-
-	start = get_timer (0);
-
-	/* data polling for D7 */
-	while ((*dest & (FPW)0x00800080) != (data & (FPW)0x00800080)) {
-		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
-			*dest = (FPW)0x00F000F0;	/* reset bank */
-			return (1);
-		}
-	}
-	return (0);
-}
diff --git a/board/tqm5200/tqm5200.c b/board/tqm5200/tqm5200.c
index 6aad920eda..d6f7737d5b 100644
--- a/board/tqm5200/tqm5200.c
+++ b/board/tqm5200/tqm5200.c
@@ -1,11 +1,11 @@
 /*
- * (C) Copyright 2003-2004
+ * (C) Copyright 2003-2006
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * (C) Copyright 2004
  * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
  *
- * (C) Copyright 2004-2005
+ * (C) Copyright 2004-2006
  * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de
  *
  * See file CREDITS for list of people who contributed to this
@@ -30,6 +30,7 @@
 #include <common.h>
 #include <mpc5xxx.h>
 #include <pci.h>
+#include <asm/processor.h>
 
 #ifdef CONFIG_VIDEO_SM501
 #include <sm501.h>
@@ -101,6 +102,8 @@ long int initdram (int board_type)
 {
 	ulong dramsize = 0;
 	ulong dramsize2 = 0;
+	uint svr, pvr;
+
 #ifndef CFG_RAMBOOT
 	ulong test1, test2;
 
@@ -190,11 +193,31 @@ long int initdram (int board_type)
 	} else {
 		dramsize2 = 0;
 	}
-
 #endif /* CFG_RAMBOOT */
 
-/*	return dramsize + dramsize2; */
+	/*
+	 * On MPC5200B we need to set the special configuration delay in the
+	 * DDR controller. Please refer to Freescale's AN3221 "MPC5200B SDRAM
+	 * Initialization and Configuration", 3.3.1 SDelay--MBAR + 0x0190:
+	 *
+	 * "The SDelay should be written to a value of 0x00000004. It is
+	 * required to account for changes caused by normal wafer processing
+	 * parameters."
+	 */
+	svr = get_svr();
+	pvr = get_pvr();
+	if ((SVR_MJREV(svr) >= 2) &&
+	    (PVR_MAJ(pvr) == 1) && (PVR_MIN(pvr) == 4)) {
+
+		*(vu_long *)MPC5XXX_SDRAM_SDELAY = 0x04;
+		__asm__ volatile ("sync");
+	}
+
+#if defined(CONFIG_TQM5200_B)
+	return dramsize + dramsize2;
+#else
 	return dramsize;
+#endif /* CONFIG_TQM5200_B */
 }
 
 #elif defined(CONFIG_MGT5100)
@@ -250,26 +273,36 @@ long int initdram (int board_type)
 
 int checkboard (void)
 {
-#if defined (CONFIG_AEVFIFO)
+#if defined(CONFIG_AEVFIFO)
 	puts ("Board: AEVFIFO\n");
 	return 0;
 #endif
-#if defined (CONFIG_TQM5200_AA)
-	puts ("Board: TQM5200-AA (TQ-Components GmbH)\n");
-#elif defined (CONFIG_TQM5200_AB)
-	puts ("Board: TQM5200-AB (TQ-Components GmbH)\n");
-#elif defined (CONFIG_TQM5200_AC)
-	puts ("Board: TQM5200-AC (TQ-Components GmbH)\n");
-#elif defined (CONFIG_TQM5200)
-	puts ("Board: TQM5200 (TQ-Components GmbH)\n");
+
+#if defined(CONFIG_TQM5200S)
+# define MODULE_NAME	"TQM5200S"
+#else
+# define MODULE_NAME	"TQM5200"
 #endif
-#if defined (CONFIG_STK52XX)
-	puts ("       on a STK52XX baseboard\n");
+
+#if defined(CONFIG_STK52XX)
+# define CARRIER_NAME	"STK52xx"
+#elif defined(CONFIG_TB5200)
+# define CARRIER_NAME	"TB5200"
+#elif defined(CONFIG_CAM5200)
+# define CARRIER_NAME	"Cam5200"
+#else
+# error "Unknown carrier board"
 #endif
 
+	puts (	"Board: " MODULE_NAME " (TQ-Components GmbH)\n"
+		"       on a " CARRIER_NAME " carrier board\n");
+
 	return 0;
 }
 
+#undef MODULE_NAME
+#undef CARRIER_NAME
+
 void flash_preinit(void)
 {
 	/*
@@ -411,7 +444,6 @@ int board_early_init_r (void)
 #endif
 #endif /* CONFIG_PS2MULT */
 
-#if defined(CONFIG_CS_AUTOCONF)
 int last_stage_init (void)
 {
 	/*
@@ -506,7 +538,6 @@ int last_stage_init (void)
 
 	return 0;
 }
-#endif /* CONFIG_CS_AUTOCONF */
 
 #ifdef CONFIG_VIDEO_SM501
 
@@ -572,20 +603,15 @@ static const SMI_REGS init_regs [] =
 void video_get_info_str (int line_number, char *info)
 {
 	if (line_number == 1) {
-#if defined (CONFIG_TQM5200_AA)
-		strcpy (info, " Board: TQM5200-AA (TQ-Components GmbH)");
-#elif defined (CONFIG_TQM5200_AB)
-		strcpy (info, " Board: TQM5200-AB (TQ-Components GmbH)");
-#elif defined (CONFIG_TQM5200_AC)
-		strcpy (info, " Board: TQM5200-AC (TQ-Components GmbH)");
-#elif defined (CONFIG_TQM5200)
-		strcpy (info, " Board: TQM5200 (TQ-Components GmbH)");
-#else
-#error No supported board selected
-#endif
-#if defined (CONFIG_STK52XX)
+	strcpy (info, " Board: TQM5200 (TQ-Components GmbH)");
+#if defined (CONFIG_STK52XX) || defined (CONFIG_TB5200)
 	} else if (line_number == 2) {
-		strcpy (info, "        on a STK52XX baseboard");
+#if defined (CONFIG_STK52XX)
+		strcpy (info, "        on a STK52xx carrier board");
+#endif
+#if defined (CONFIG_TB5200)
+		strcpy (info, "        on a TB5200 carrier board");
+#endif
 #endif
 	}
 	else {
diff --git a/board/tqm834x/tqm834x.c b/board/tqm834x/tqm834x.c
index b5c12e3e24..41b34cc6fa 100644
--- a/board/tqm834x/tqm834x.c
+++ b/board/tqm834x/tqm834x.c
@@ -406,4 +406,30 @@ static void set_ddr_config(void) {
 		(DDR_REFINT_166MHZ_7US << SDRAM_INTERVAL_REFINT_SHIFT) |
 		(DDR_BSTOPRE << SDRAM_INTERVAL_BSTOPRE_SHIFT);
 	SYNC;
+
+	/* Workaround for DDR6 Erratum
+	 * see MPC8349E Device Errata Rev.8, 2/2006
+	 * This workaround influences the MPC internal "input enables"
+	 * dependent on CAS latency and MPC revision. According to errata
+	 * sheet the internal reserved registers for this workaround are
+	 * not available from revision 2.0 and up.
+	 */
+
+	/* Get REVID from register SPRIDR. Skip workaround if rev >= 2.0
+	 * (0x200)
+	 */
+	if ((im->sysconf.spridr & SPRIDR_REVID) < 0x200) {
+
+		/* There is a internal reserved register at IMMRBAR+0x2F00
+		 * which has to be written with a certain value defined by
+		 * errata sheet.
+		 */
+		u32 *reserved_p = (u32 *)((u8 *)im + 0x2f00);
+
+#if defined(DDR_CASLAT_20)
+		*reserved_p = 0x201c0000;
+#else
+		*reserved_p = 0x202c0000;
+#endif
+	}
 }
diff --git a/board/tqm85xx/tqm85xx.c b/board/tqm85xx/tqm85xx.c
index 69b91017fe..b4ef5afe70 100644
--- a/board/tqm85xx/tqm85xx.c
+++ b/board/tqm85xx/tqm85xx.c
@@ -27,7 +27,6 @@
  * MA 02111-1307 USA
  */
 
-
 #include <common.h>
 #include <pci.h>
 #include <asm/processor.h>
@@ -44,6 +43,10 @@ void local_bus_init (void);
 long int fixed_sdram (void);
 ulong flash_get_size (ulong base, int banknum);
 
+#ifdef CONFIG_PS2MULT
+void ps2mult_early_init(void);
+#endif
+
 #ifdef CONFIG_CPM2
 /*
  * I/O Port configuration table
@@ -410,3 +413,13 @@ void pci_init_board (void)
 	pci_mpc85xx_init (&hose);
 #endif /* CONFIG_PCI */
 }
+
+#ifdef CONFIG_BOARD_EARLY_INIT_R
+int board_early_init_r (void)
+{
+#ifdef CONFIG_PS2MULT
+	ps2mult_early_init();
+#endif /* CONFIG_PS2MULT */
+	return (0);
+}
+#endif /* CONFIG_BOARD_EARLY_INIT_R */
diff --git a/board/tqm8xx/flash.c b/board/tqm8xx/flash.c
index ab57ee5c61..db0a7e5eb8 100644
--- a/board/tqm8xx/flash.c
+++ b/board/tqm8xx/flash.c
@@ -33,12 +33,13 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#if defined(CONFIG_TQM8xxL) && !defined(CONFIG_TQM866M)
+#if defined(CONFIG_TQM8xxL) && !defined(CONFIG_TQM866M) \
+    && !defined(CONFIG_TQM885D)
 # ifndef CFG_OR_TIMING_FLASH_AT_50MHZ
 #  define CFG_OR_TIMING_FLASH_AT_50MHZ	(OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
 					 OR_SCY_2_CLK | OR_EHTR | OR_BI)
 # endif
-#endif /* CONFIG_TQM8xxL/M, !TQM866M */
+#endif /* CONFIG_TQM8xxL/M, !TQM866M, !TQM885D */
 
 #ifndef	CFG_ENV_ADDR
 #define CFG_ENV_ADDR	(CFG_FLASH_BASE + CFG_ENV_OFFSET)
diff --git a/board/tqm8xx/tqm8xx.c b/board/tqm8xx/tqm8xx.c
index b292231c96..6b206f8a18 100644
--- a/board/tqm8xx/tqm8xx.c
+++ b/board/tqm8xx/tqm8xx.c
@@ -119,6 +119,10 @@ int checkboard (void)
 		gd->board_type = 'M';
 	}
 
+	if ((*(s + 6) == 'D')) {	/* a TQM885D type */
+		gd->board_type = 'D';
+	}
+
 	for (; *s; ++s) {
 		if (*s == ' ')
 			break;
@@ -178,7 +182,8 @@ long int initdram (int board_type)
 
 #ifndef	CONFIG_CAN_DRIVER
 	if ((board_type != 'L') &&
-	    (board_type != 'M') ) {	/* "L" and "M" type boards have only one bank SDRAM */
+	    (board_type != 'M') &&
+	    (board_type != 'D') ) {	/* "L" and "M" type boards have only one bank SDRAM */
 		memctl->memc_or3 = CFG_OR3_PRELIM;
 		memctl->memc_br3 = CFG_BR3_PRELIM;
 	}
@@ -197,7 +202,8 @@ long int initdram (int board_type)
 
 #ifndef	CONFIG_CAN_DRIVER
 	if ((board_type != 'L') &&
-	    (board_type != 'M') ) {	/* "L" and "M" type boards have only one bank SDRAM */
+	    (board_type != 'M') &&
+	    (board_type != 'D') ) {	/* only one SDRAM bank on L, M and D modules */
 		memctl->memc_mcr = 0x80006105;	/* SDRAM bank 1 */
 		udelay (1);
 		memctl->memc_mcr = 0x80006230;	/* SDRAM bank 1 - execute twice */
@@ -214,8 +220,7 @@ long int initdram (int board_type)
 	 *
 	 * try 8 column mode
 	 */
-	size8 = dram_size (CFG_MAMR_8COL, SDRAM_BASE2_PRELIM,
-					   SDRAM_MAX_SIZE);
+	size8 = dram_size (CFG_MAMR_8COL, SDRAM_BASE2_PRELIM, SDRAM_MAX_SIZE);
 	debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size8 >> 20);
 
 	udelay (1000);
@@ -223,8 +228,7 @@ long int initdram (int board_type)
 	/*
 	 * try 9 column mode
 	 */
-	size9 = dram_size (CFG_MAMR_9COL, SDRAM_BASE2_PRELIM,
-					   SDRAM_MAX_SIZE);
+	size9 = dram_size (CFG_MAMR_9COL, SDRAM_BASE2_PRELIM, SDRAM_MAX_SIZE);
 	debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size9 >> 20);
 
 	udelay(1000);
@@ -233,8 +237,7 @@ long int initdram (int board_type)
 	/*
 	 * try 10 column mode
 	 */
-	size10 = dram_size (CFG_MAMR_10COL, (ulong *) SDRAM_BASE2_PRELIM,
-					     SDRAM_MAX_SIZE);
+	size10 = dram_size (CFG_MAMR_10COL, SDRAM_BASE2_PRELIM, SDRAM_MAX_SIZE);
 	debug ("SDRAM Bank 0 in 10 column mode: %ld MB\n", size10 >> 20);
 #else
 	size10 = 0;
@@ -255,7 +258,8 @@ long int initdram (int board_type)
 
 #ifndef	CONFIG_CAN_DRIVER
 	if ((board_type != 'L') &&
-	    (board_type != 'M') ) {	/* "L" and "M" type boards have only one bank SDRAM */
+	    (board_type != 'M') &&
+	    (board_type != 'D') ) {	/* "L" and "M" type boards have only one bank SDRAM */
 		/*
 		 * Check Bank 1 Memory Size
 		 * use current column settings
diff --git a/board/trab/auto_update.c b/board/trab/auto_update.c
index 056e562bfe..d2c8d44a79 100644
--- a/board/trab/auto_update.c
+++ b/board/trab/auto_update.c
@@ -57,9 +57,9 @@
  *		valid then run it.
  *	2) if preinst.img is found load it into memory. If it is
  *		valid then run it. Update the EEPROM.
- *	3) if firmware.img is found load it into memory. If it is valid,
+ *	3) if firmw_01.img is found load it into memory. If it is valid,
  *		burn it into FLASH and update the EEPROM.
- *	4) if kernel.img is found load it into memory. If it is valid,
+ *	4) if kernl_01.img is found load it into memory. If it is valid,
  *		burn it into FLASH and update the EEPROM.
  *	5) if app.img is found load it into memory. If it is valid,
  *		burn it into FLASH and update the EEPROM.
@@ -81,8 +81,8 @@
 /* possible names of files on the USB stick. */
 #define AU_PREPARE	"prepare.img"
 #define AU_PREINST	"preinst.img"
-#define AU_FIRMWARE	"firmware.img"
-#define AU_KERNEL	"kernel.img"
+#define AU_FIRMWARE	"firmw_01.img"
+#define AU_KERNEL	"kernl_01.img"
 #define AU_APP		"app.img"
 #define AU_DISK		"disk.img"
 #define AU_POSTINST	"postinst.img"
@@ -222,7 +222,7 @@ au_check_cksum_valid(int idx, long nbytes)
 	/* check the data CRC */
 	checksum = ntohl(hdr->ih_dcrc);
 
-	if (crc32 (0, (char *)(LOAD_ADDR + sizeof(*hdr)), ntohl(hdr->ih_size))
+	if (crc32 (0, (uchar *)(LOAD_ADDR + sizeof(*hdr)), ntohl(hdr->ih_size))
 		!= checksum)
 	{
 		printf ("Image %s bad data checksum\n", aufile[idx]);
@@ -261,7 +261,7 @@ au_check_header_valid(int idx, long nbytes)
 	checksum = ntohl(hdr->ih_hcrc);
 	hdr->ih_hcrc = 0;
 
-	if (crc32 (0, (char *)hdr, sizeof(*hdr)) != checksum) {
+	if (crc32 (0, (uchar *)hdr, sizeof(*hdr)) != checksum) {
 		printf ("Image %s bad header checksum\n", aufile[idx]);
 		return -1;
 	}
@@ -397,7 +397,7 @@ au_do_update(int idx, long sz)
 	}
 
 	/* check the dcrc of the copy */
-	if (crc32 (0, (char *)(start + off), ntohl(hdr->ih_size)) != ntohl(hdr->ih_dcrc)) {
+	if (crc32 (0, (uchar *)(start + off), ntohl(hdr->ih_size)) != ntohl(hdr->ih_dcrc)) {
 		printf ("Image %s Bad Data Checksum After COPY\n", aufile[idx]);
 		return -1;
 	}
@@ -613,7 +613,8 @@ do_auto_update(void)
 #define VFD_LOGO_WIDTH 112
 #define VFD_LOGO_HEIGHT 72
 				/* must call transfer_pic directly */
-				transfer_pic(3, env, VFD_LOGO_HEIGHT, VFD_LOGO_WIDTH);
+				transfer_pic(3, (unsigned char *)env,
+					     VFD_LOGO_HEIGHT, VFD_LOGO_WIDTH);
 			}
 			bitmap_first = 1;
 		}
diff --git a/board/trab/cmd_trab.c b/board/trab/cmd_trab.c
index 00eb385fdf..b82c8edef7 100644
--- a/board/trab/cmd_trab.c
+++ b/board/trab/cmd_trab.c
@@ -147,11 +147,11 @@ u8 status;
 u16 pass_cycles;
 u16 first_error_cycle;
 u8 first_error_num;
-unsigned char first_error_name[16];
+char first_error_name[16];
 u16 act_cycle;
 
 typedef struct test_function_s {
-	unsigned char *name;
+	char *name;
 	int (*pf)(void);
 } test_function_t;
 
@@ -376,7 +376,7 @@ int do_burn_in_status (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		return (1);
 	}
 	if (i2c_read_multiple (I2C_EEPROM_DEV_ADDR, EE_ADDR_FIRST_ERROR_NAME,
-			       1, first_error_name,
+			       1, (unsigned char*)first_error_name,
 			       sizeof (first_error_name))) {
 		return (1);
 	}
@@ -537,7 +537,7 @@ static int test_eeprom (void)
 
 	/* write test string 1, read back and verify */
 	if (i2c_write_multiple (I2C_EEPROM_DEV_ADDR, EE_ADDR_TEST, 1,
-				EEPROM_TEST_STRING_1,
+				(unsigned char*)EEPROM_TEST_STRING_1,
 				sizeof (EEPROM_TEST_STRING_1))) {
 		return (1);
 	}
@@ -547,7 +547,7 @@ static int test_eeprom (void)
 		return (1);
 	}
 
-	if (strcmp (temp, EEPROM_TEST_STRING_1) != 0) {
+	if (strcmp ((char *)temp, EEPROM_TEST_STRING_1) != 0) {
 		result = 1;
 		printf ("%s: error; read_str = \"%s\"\n", __FUNCTION__, temp);
 	}
@@ -555,7 +555,7 @@ static int test_eeprom (void)
 	/* write test string 2, read back and verify */
 	if (result == 0) {
 		if (i2c_write_multiple (I2C_EEPROM_DEV_ADDR, EE_ADDR_TEST, 1,
-					EEPROM_TEST_STRING_2,
+					(unsigned char*)EEPROM_TEST_STRING_2,
 					sizeof (EEPROM_TEST_STRING_2))) {
 			return (1);
 		}
@@ -565,7 +565,7 @@ static int test_eeprom (void)
 			return (1);
 		}
 
-		if (strcmp (temp, EEPROM_TEST_STRING_2) != 0) {
+		if (strcmp ((char *)temp, EEPROM_TEST_STRING_2) != 0) {
 			result = 1;
 			printf ("%s: error; read str = \"%s\"\n",
 				__FUNCTION__, temp);
@@ -729,6 +729,7 @@ static void led_blink (void)
 
 	/* blink LED. This function does not return! */
 	while (1) {
+		reset_timer_masked ();
 		led_set (1);
 		udelay (1000000 / LED_BLINK_FREQ / 2);
 		led_set (0);
@@ -776,7 +777,7 @@ static int global_vars_write_to_eeprom (void)
 		return (1);
 	}
 	if (i2c_write_multiple (I2C_EEPROM_DEV_ADDR, EE_ADDR_FIRST_ERROR_NAME,
-				1, first_error_name,
+				1, (unsigned char*) first_error_name,
 				sizeof(first_error_name))) {
 		return (1);
 	}
diff --git a/board/trab/flash.c b/board/trab/flash.c
index 8cdd82400b..3e8f105a03 100644
--- a/board/trab/flash.c
+++ b/board/trab/flash.c
@@ -281,10 +281,12 @@ int flash_erase (flash_info_t * info, int s_first, int s_last)
 
 			if (chip1 == ERR || chip2 == ERR) {
 				rc = ERR_PROG_ERROR;
+				printf ("Flash erase error\n");
 				goto outahere;
 			}
 			if (chip1 == TMO) {
 				rc = ERR_TIMOUT;
+				printf ("Flash erase timeout error\n");
 				goto outahere;
 			}
 		}
@@ -340,7 +342,9 @@ static int write_word (flash_info_t * info, ulong dest, ulong data)
 #endif
 	iflag = disable_interrupts ();
 
-	*addr = CMD_PROGRAM;
+	MEM_FLASH_ADDR1 = CMD_UNLOCK1;
+	MEM_FLASH_ADDR2 = CMD_UNLOCK2;
+	MEM_FLASH_ADDR1 = CMD_PROGRAM;
 	*addr = data;
 
 	/* arm simple, non interrupt dependent timer */
@@ -352,7 +356,7 @@ static int write_word (flash_info_t * info, ulong dest, ulong data)
 		result = *addr;
 
 		/* check timeout */
-		if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
+		if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
 			chip1 = ERR | TMO;
 			break;
 		}
@@ -384,8 +388,13 @@ static int write_word (flash_info_t * info, ulong dest, ulong data)
 
 	*addr = CMD_READ_ARRAY;
 
-	if (chip1 == ERR || chip2 == ERR || *addr != data)
+	if (chip1 == ERR || chip2 == ERR || *addr != data) {
 		rc = ERR_PROG_ERROR;
+		printf ("Flash program error\n");
+		debug ("chip1: %#x, chip2: %#x, addr: %#lx *addr: %#lx, "
+		       "data: %#lx\n",
+		       chip1, chip2, addr, *addr, data);
+	}
 
 	if (iflag)
 		enable_interrupts ();
@@ -408,10 +417,6 @@ int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
 	int l;
 	int i, rc;
 
-	MEM_FLASH_ADDR1 = CMD_UNLOCK1;
-	MEM_FLASH_ADDR2 = CMD_UNLOCK2;
-	MEM_FLASH_ADDR1 = CMD_UNLOCK_BYPASS;
-
 	wp = (addr & ~3);	/* get lower word aligned address */
 
 	/*
@@ -479,9 +484,6 @@ int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
 
 	Done:
 
-	MEM_FLASH_ADDR = CMD_UNLOCK_BYPASS_RES1;
-	MEM_FLASH_ADDR = CMD_UNLOCK_BYPASS_RES2;
-
 	return (rc);
 }
 
@@ -515,7 +517,7 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
 		info->flash_id = FLASH_UNKNOWN;
 		info->sector_count = 0;
 		info->size = 0;
-		addr[0] = 0x00FF00FF;		/* restore read mode */
+		addr[0] = CMD_READ_ARRAY;	/* restore read mode */
 		debug ("## flash_init: unknown manufacturer\n");
 		return (0);			/* no or unknown flash	*/
 	}
@@ -530,7 +532,7 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
 		info->sector_count = 71;
 		info->size = 0x00800000;
 
-		addr[0] = 0x00FF00FF;		/* restore read mode */
+		addr[0] = CMD_READ_ARRAY;	/* restore read mode */
 		break;				/* =>  8 MB		*/
 
 	case AMD_ID_LV640U:
@@ -538,7 +540,7 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
 		info->sector_count = 128;
 		info->size = 0x01000000;
 
-		addr[0] = 0x00F000F0;		/* restore read mode */
+		addr[0] = CMD_READ_ARRAY;	/* restore read mode */
 		break;				/* => 16 MB		*/
 
 	case MX_ID_LV320B:
@@ -546,13 +548,13 @@ static ulong flash_get_size (vu_long *addr, flash_info_t *info)
 		info->sector_count = 71;
 		info->size = 0x00800000;
 
-		addr[0] = 0x00FF00FF;		/* restore read mode */
+		addr[0] = CMD_READ_ARRAY;	/* restore read mode */
 		break;				/* =>  8 MB		*/
 
 	default:
 		debug ("## flash_init: unknown flash chip\n");
 		info->flash_id = FLASH_UNKNOWN;
-		addr[0] = 0x00FF00FF;		/* restore read mode */
+		addr[0] = CMD_READ_ARRAY;	/* restore read mode */
 		return (0);			/* => no or unknown flash */
 
 	}
diff --git a/board/trab/memory.c b/board/trab/memory.c
index 4097892b9e..58bd99500a 100644
--- a/board/trab/memory.c
+++ b/board/trab/memory.c
@@ -419,14 +419,14 @@ int memory_post_tests (unsigned long start, unsigned long size)
 	int ret = 0;
 
 	if (ret == 0)
-		ret = memory_post_dataline ((long long *)start);
+		ret = memory_post_dataline ((unsigned long long *)start);
 	WATCHDOG_RESET ();
 	if (ret == 0)
-		ret = memory_post_addrline ((long *)start, (long *)start, size);
+		ret = memory_post_addrline ((ulong *)start, (ulong *)start, size);
 	WATCHDOG_RESET ();
 	if (ret == 0)
-		ret = memory_post_addrline ((long *)(start + size - 8),
-					    (long *)start, size);
+		ret = memory_post_addrline ((ulong *)(start + size - 8),
+					    (ulong *)start, size);
 	WATCHDOG_RESET ();
 	if (ret == 0)
 		ret = memory_post_test1 (start, size, 0x00000000);
diff --git a/board/trab/trab.c b/board/trab/trab.c
index 868a899ee9..26e52d29e8 100644
--- a/board/trab/trab.c
+++ b/board/trab/trab.c
@@ -152,15 +152,28 @@ int dram_init (void)
 
 #define KBD_DATA	(((*(volatile ulong *)0x04020000) >> 16) & 0xF)
 
-static uchar *key_match (ulong);
+static char *key_match (ulong);
 
 int misc_init_r (void)
 {
 	ulong kbd_data = KBD_DATA;
-	uchar keybd_env[KEYBD_KEY_NUM + 1];
-	uchar *str;
+	char *str;
+	char keybd_env[KEYBD_KEY_NUM + 1];
 	int i;
 
+#ifdef CONFIG_VERSION_VARIABLE
+	{
+		/* Set version variable. Please note, that this variable is
+		 * also set in main_loop() later in the boot process. The
+		 * version variable has to be set this early, because so it
+		 * could be used in script files on an usb stick, which
+		 * might be called during do_auto_update() */
+		extern char version_string[];
+
+		setenv ("ver", version_string);
+	}
+#endif /* CONFIG_VERSION_VARIABLE */
+
 #ifdef CONFIG_AUTO_UPDATE
 	extern int do_auto_update(void);
 	/* this has priority over all else */
@@ -195,7 +208,7 @@ int misc_init_r (void)
 static uchar kbd_magic_prefix[] = "key_magic";
 static uchar kbd_command_prefix[] = "key_cmd";
 
-static int compare_magic (ulong kbd_data, uchar *str)
+static int compare_magic (ulong kbd_data, char *str)
 {
 	uchar key_mask;
 
@@ -241,12 +254,12 @@ static int compare_magic (ulong kbd_data, uchar *str)
  * Note: the string points to static environment data and must be
  * saved before you call any function that modifies the environment.
  */
-static uchar *key_match (ulong kbd_data)
+static char *key_match (ulong kbd_data)
 {
-	uchar magic[sizeof (kbd_magic_prefix) + 1];
-	uchar cmd_name[sizeof (kbd_command_prefix) + 1];
-	uchar *suffix;
-	uchar *kbd_magic_keys;
+	char magic[sizeof (kbd_magic_prefix) + 1];
+	char cmd_name[sizeof (kbd_command_prefix) + 1];
+	char *suffix;
+	char *kbd_magic_keys;
 
 	/*
 	 * The following string defines the characters that can pe appended
@@ -291,7 +304,7 @@ static uchar *key_match (ulong kbd_data)
 int do_kbd (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 {
 	ulong kbd_data = KBD_DATA;
-	uchar keybd_env[KEYBD_KEY_NUM + 1];
+	char keybd_env[KEYBD_KEY_NUM + 1];
 	int i;
 
 	puts ("Keys:");
@@ -391,7 +404,7 @@ static void tsc2000_write(unsigned int page, unsigned int reg,
 
 static void tsc2000_set_brightness(void)
 {
-	uchar tmp[10];
+	char tmp[10];
 	int i, br;
 
 	spi_init();
diff --git a/board/trab/trab_fkt.c b/board/trab/trab_fkt.c
index abb3b29c8c..71be6e03e5 100644
--- a/board/trab/trab_fkt.c
+++ b/board/trab/trab_fkt.c
@@ -967,21 +967,21 @@ static int touch_write_clibration_values (int calib_point, int x, int y)
 
 	if (calib_point == CALIB_TL) {
 		if (i2c_write_multiple (I2C_EEPROM_DEV_ADDR, TOUCH_X0, 1,
-			       (char *)&x, 2)) {
+			       (unsigned char *)&x, 2)) {
 			return 1;
 		}
 		if (i2c_write_multiple (I2C_EEPROM_DEV_ADDR, TOUCH_Y0, 1,
-			       (char *)&y, 2)) {
+			       (unsigned char *)&y, 2)) {
 			return 1;
 		}
 
 		/* verify written values */
 		if (i2c_read_multiple (I2C_EEPROM_DEV_ADDR, TOUCH_X0, 1,
-			      (char *)&x_verify, 2)) {
+			      (unsigned char *)&x_verify, 2)) {
 			return 1;
 		}
 		if (i2c_read_multiple (I2C_EEPROM_DEV_ADDR, TOUCH_Y0, 1,
-			       (char *)&y_verify, 2)) {
+			       (unsigned char *)&y_verify, 2)) {
 			return 1;
 		}
 		if ((y != y_verify) || (x != x_verify)) {
@@ -993,21 +993,21 @@ static int touch_write_clibration_values (int calib_point, int x, int y)
 	}
 	else if (calib_point == CALIB_DR) {
 		  if (i2c_write_multiple (I2C_EEPROM_DEV_ADDR, TOUCH_X1, 1,
-			       (char *)&x, 2)) {
+			       (unsigned char *)&x, 2)) {
 			return 1;
 		  }
 		if (i2c_write_multiple (I2C_EEPROM_DEV_ADDR, TOUCH_Y1, 1,
-			       (char *)&y, 2)) {
+			       (unsigned char *)&y, 2)) {
 			return 1;
 		}
 
 		/* verify written values */
 		if (i2c_read_multiple (I2C_EEPROM_DEV_ADDR, TOUCH_X1, 1,
-				       (char *)&x_verify, 2)) {
+				       (unsigned char *)&x_verify, 2)) {
 			return 1;
 		}
 		if (i2c_read_multiple (I2C_EEPROM_DEV_ADDR, TOUCH_Y1, 1,
-			       (char *)&y_verify, 2)) {
+			       (unsigned char *)&y_verify, 2)) {
 			return 1;
 		}
 		if ((y != y_verify) || (x != x_verify)) {
@@ -1110,7 +1110,7 @@ int do_serial_number (char **argv)
 
 	if (strcmp (argv[2], "read") == 0) {
 		if (i2c_read (I2C_EEPROM_DEV_ADDR, SERIAL_NUMBER, 1,
-			      (char *)&serial_number, 4)) {
+			      (unsigned char *)&serial_number, 4)) {
 			printf ("could not read from eeprom\n");
 			return (1);
 		}
@@ -1121,7 +1121,7 @@ int do_serial_number (char **argv)
 	else if (strcmp (argv[2], "write") == 0) {
 		serial_number = simple_strtoul(argv[3], NULL, 10);
 		if (i2c_write (I2C_EEPROM_DEV_ADDR, SERIAL_NUMBER, 1,
-			      (char *)&serial_number, 4)) {
+			      (unsigned char *)&serial_number, 4)) {
 			printf ("could not write to eeprom\n");
 			return (1);
 		}
@@ -1141,7 +1141,7 @@ int do_crc16 (void)
 {
 #if (CONFIG_COMMANDS & CFG_CMD_I2C)
 	int crc;
-	char buf[EEPROM_MAX_CRC_BUF];
+	unsigned char buf[EEPROM_MAX_CRC_BUF];
 
 	if (i2c_read (I2C_EEPROM_DEV_ADDR, 0, 1, buf, 60)) {
 		printf ("could not read from eeprom\n");
@@ -1153,7 +1153,7 @@ int do_crc16 (void)
 	print_identifier ();
 	printf ("crc16=%#04x\n", crc);
 
-	if (i2c_write (I2C_EEPROM_DEV_ADDR, CRC16, 1, (char *)&crc,
+	if (i2c_write (I2C_EEPROM_DEV_ADDR, CRC16, 1, (unsigned char *)&crc,
 		       sizeof (crc))) {
 		printf ("could not read from eeprom\n");
 		return (1);
diff --git a/board/trab/tsc2000.c b/board/trab/tsc2000.c
index ca6868212e..382a85b359 100644
--- a/board/trab/tsc2000.c
+++ b/board/trab/tsc2000.c
@@ -223,7 +223,7 @@ u16 tsc2000_read_channel (unsigned int channel)
 	u16 res;
 
 	tsc2000_set_mux(channel);
-	udelay(3 * TSC2000_DELAY_BASE);
+	udelay(20 * TSC2000_DELAY_BASE);
 
 	tsc2000_write(TSC2000_REG_ADC, 0x2036);
 	adc_wait_conversion_done ();
diff --git a/board/trab/vfd.c b/board/trab/vfd.c
index cea8b0b665..b6798fdce7 100644
--- a/board/trab/vfd.c
+++ b/board/trab/vfd.c
@@ -251,19 +251,17 @@ void create_vfd_table(void)
 			    unsigned long adr  = gd->fb_base;
 			    unsigned int bit_nr = 0;
 
-			    if (vfd_table[x][y][color][display][entry]) {
-
-				pixel  = vfd_table[x][y][color][display][entry] + frame_buf_offs;
-				 /*
-				  * wrap arround if offset
-				  * (see manual S3C2400)
-				  */
-				if (pixel>=FRAME_BUF_SIZE*8)
-					pixel = pixel-(FRAME_BUF_SIZE*8);
-				adr    = gd->fb_base+(pixel/32)*4+(3-(pixel%32)/8);
-				bit_nr = pixel%8;
-				bit_nr = (bit_nr>3)?bit_nr-4:bit_nr+4;
-			    }
+			    pixel  = vfd_table[x][y][color][display][entry] + frame_buf_offs;
+			    /*
+			     * wrap arround if offset
+			     * (see manual S3C2400)
+			     */
+			    if (pixel>=FRAME_BUF_SIZE*8)
+				    pixel = pixel-(FRAME_BUF_SIZE*8);
+			    adr    = gd->fb_base+(pixel/32)*4+(3-(pixel%32)/8);
+			    bit_nr = pixel%8;
+			    bit_nr = (bit_nr>3)?bit_nr-4:bit_nr+4;
+
 			    adr_vfd_table[x][y][color][display][entry] = adr;
 			    bit_vfd_table[x][y][color][display][entry] = bit_nr;
 			}
@@ -358,6 +356,8 @@ void transfer_pic(int display, unsigned char *adr, int height, int width)
  */
 int vfd_init_clocks (void)
 {
+	int i;
+
 	S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
 	S3C24X0_TIMERS * const timers = S3C24X0_GetBase_TIMERS();
 	S3C24X0_LCD * const lcd = S3C24X0_GetBase_LCD();
@@ -367,7 +367,9 @@ int vfd_init_clocks (void)
 	 */
 	gpio->PCUP = (gpio->PCUP & 0xFFF0);	/* activate  GPC0...GPC3 pullups */
 	gpio->PCCON = (gpio->PCCON & 0xFFFFFF00);	/* configure GPC0...GPC3 as inputs */
-	udelay (10);				/* allow signals to settle */
+	/* allow signals to settle */
+	for (i=0; i<10000; i++)	/* udelay isn't working yet at this point! */
+		__asm("NOP");
 	vfd_board_id = (~gpio->PCDAT) & 0x000F;	/* read GPC0...GPC3 port pins */
 
 	VFD_DISABLE;				/* activate blank for the vfd */
diff --git a/board/uc100/Makefile b/board/uc100/Makefile
index eb81625fef..2d2cc23209 100644
--- a/board/uc100/Makefile
+++ b/board/uc100/Makefile
@@ -25,8 +25,8 @@ include $(TOPDIR)/config.mk
 
 LIB	= lib$(BOARD).a
 
-#OBJS	= $(BOARD).o flash.o
-OBJS	= $(BOARD).o
+#OBJS	= $(BOARD).o flash.o pcmcia.o
+OBJS	= $(BOARD).o pcmcia.o
 
 $(LIB):	.depend $(OBJS)
 	$(AR) crv $@ $(OBJS)
diff --git a/board/uc100/pcmcia.c b/board/uc100/pcmcia.c
new file mode 100644
index 0000000000..6e4b6d6c66
--- /dev/null
+++ b/board/uc100/pcmcia.c
@@ -0,0 +1,198 @@
+#include <common.h>
+#include <mpc8xx.h>
+#include <pcmcia.h>
+
+#undef	CONFIG_PCMCIA
+
+#if	(CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+#define	CONFIG_PCMCIA
+#endif
+
+#if	(CONFIG_COMMANDS & CFG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD)
+#define	CONFIG_PCMCIA
+#endif
+
+#ifdef	CONFIG_PCMCIA
+
+#define PCMCIA_BOARD_MSG "UC100"
+
+/*
+ * Remark: don't turn off OE "__MY_PCMCIA_GCRX_CXOE" on UC100 board.
+ *         This leads to board-hangup! (sr, 8 Dez. 2004)
+ */
+static void cfg_ports (void)
+{
+	volatile immap_t	*immap;
+
+	immap = (immap_t *)CFG_IMMR;
+
+	/*
+	* Configure Port A for MAX1602 PC-Card Power-Interface Switch
+	*/
+	immap->im_ioport.iop_padat &= ~0x8000;	/* set port x output to low */
+	immap->im_ioport.iop_padir |= 0x8000;	/* enable port x as output */
+
+	debug ("Set Port A: PAR: %08x DIR: %08x DAT: %08x\n",
+	       immap->im_ioport.iop_papar, immap->im_ioport.iop_padir,
+	       immap->im_ioport.iop_padat);
+}
+
+int pcmcia_hardware_enable(int slot)
+{
+	volatile immap_t	*immap;
+	volatile cpm8xx_t	*cp;
+	volatile pcmconf8xx_t	*pcmp;
+	volatile sysconf8xx_t	*sysp;
+	uint reg, mask;
+
+	debug ("hardware_enable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
+
+	udelay(10000);
+
+	immap = (immap_t *)CFG_IMMR;
+	sysp  = (sysconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_siu_conf));
+	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
+
+	/* Configure Ports for TPS2211A PC-Card Power-Interface Switch */
+	cfg_ports ();
+
+	/*
+	* Configure SIUMCR to enable PCMCIA port B
+	* (VFLS[0:1] are not used for debugging, we connect FRZ# instead)
+	*/
+	sysp->sc_siumcr &= ~SIUMCR_DBGC11;	/* set DBGC to 00 */
+
+	/* clear interrupt state, and disable interrupts */
+	pcmp->pcmc_pscr =  PCMCIA_MASK(_slot_);
+	pcmp->pcmc_per &= ~PCMCIA_MASK(_slot_);
+
+	/*
+	* Disable interrupts, DMA, and PCMCIA buffers
+	* (isolate the interface) and assert RESET signal
+	*/
+	debug ("Disable PCMCIA buffers and assert RESET\n");
+	reg  = 0;
+	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	PCMCIA_PGCRX(_slot_) = reg;
+	udelay(500);
+
+	/*
+	* Make sure there is a card in the slot, then configure the interface.
+	*/
+	udelay(10000);
+	debug ("[%d] %s: PIPR(%p)=0x%x\n",
+	       __LINE__,__FUNCTION__,
+	       &(pcmp->pcmc_pipr),pcmp->pcmc_pipr);
+	if (pcmp->pcmc_pipr & (0x18000000 >> (slot << 4))) {
+		printf ("   No Card found\n");
+		return (1);
+	}
+
+	/*
+	* Power On.
+	*/
+	mask = PCMCIA_VS1(slot) | PCMCIA_VS2(slot);
+	reg  = pcmp->pcmc_pipr;
+	debug ("PIPR: 0x%x ==> VS1=o%s, VS2=o%s\n",
+	       reg,
+	       (reg&PCMCIA_VS1(slot))?"n":"ff",
+	       (reg&PCMCIA_VS2(slot))?"n":"ff");
+	if ((reg & mask) == mask) {
+		puts (" 5.0V card found: ");
+	} else {
+		puts (" 3.3V card found: ");
+	}
+
+	/*  switch VCC on */
+	immap->im_ioport.iop_padat |= 0x8000; /* power enable 3.3V */
+
+	udelay(10000);
+
+	debug ("Enable PCMCIA buffers and stop RESET\n");
+	reg  =  PCMCIA_PGCRX(_slot_);
+	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg &= ~__MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX(_slot_) = reg;
+
+	udelay(250000);	/* some cards need >150 ms to come up :-( */
+
+	debug ("# hardware_enable done\n");
+
+	return (0);
+}
+
+
+#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+int pcmcia_hardware_disable(int slot)
+{
+	volatile immap_t	*immap;
+	volatile cpm8xx_t	*cp;
+	volatile pcmconf8xx_t	*pcmp;
+	u_long reg;
+
+	debug ("hardware_disable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
+
+	immap = (immap_t *)CFG_IMMR;
+	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+
+	/* switch VCC off */
+	immap->im_ioport.iop_padat &= ~0x8000; /* power disable 3.3V */
+
+	/* Configure PCMCIA General Control Register */
+	debug ("Disable PCMCIA buffers and assert RESET\n");
+	reg  = 0;
+	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	PCMCIA_PGCRX(_slot_) = reg;
+
+	udelay(10000);
+
+	return (0);
+}
+#endif	/* CFG_CMD_PCMCIA */
+
+
+int pcmcia_voltage_set(int slot, int vcc, int vpp)
+{
+	volatile immap_t	*immap;
+	volatile pcmconf8xx_t	*pcmp;
+	u_long reg;
+
+	debug ("voltage_set: "
+			PCMCIA_BOARD_MSG
+			" Slot %c, Vcc=%d.%d, Vpp=%d.%d\n",
+	'A'+slot, vcc/10, vcc%10, vpp/10, vcc%10);
+
+	immap = (immap_t *)CFG_IMMR;
+	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+	/*
+	* Disable PCMCIA buffers (isolate the interface)
+	* and assert RESET signal
+	*/
+	debug ("Disable PCMCIA buffers and assert RESET\n");
+	reg  = PCMCIA_PGCRX(_slot_);
+	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	PCMCIA_PGCRX(_slot_) = reg;
+	udelay(500);
+
+	/*
+	* Configure Port C pins for
+	* 5 Volts Enable and 3 Volts enable,
+	* Turn all power pins to Hi-Z
+	*/
+	debug ("PCMCIA power OFF\n");
+	cfg_ports ();	/* Enables switch, but all in Hi-Z */
+
+	debug ("Enable PCMCIA buffers and stop RESET\n");
+	reg  =  PCMCIA_PGCRX(_slot_);
+	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg &= ~__MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	PCMCIA_PGCRX(_slot_) = reg;
+	udelay(500);
+
+	debug ("voltage_set: " PCMCIA_BOARD_MSG " Slot %c, DONE\n",
+	       slot+'A');
+	return (0);
+}
+
+#endif	/* CONFIG_PCMCIA */
diff --git a/board/voiceblue/config.mk b/board/voiceblue/config.mk
index c73cd27bf1..b77c91c65e 100644
--- a/board/voiceblue/config.mk
+++ b/board/voiceblue/config.mk
@@ -12,5 +12,5 @@ ifeq ($(VOICEBLUE_SMALL_FLASH),y)
 TEXT_BASE = 0x20012000
 else
 # Running in SDRAM...
-TEXT_BASE = 0x13000000
+TEXT_BASE = 0x13FD0000
 endif
diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c
index 04fa4facae..256e4bc796 100644
--- a/common/cmd_bdinfo.c
+++ b/common/cmd_bdinfo.c
@@ -61,11 +61,12 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	print_num ("bootflags",	    bd->bi_bootflags	);
 #if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
     defined(CONFIG_405EP) || defined(CONFIG_XILINX_ML300) || \
-    defined(CONFIG_440EP) || defined(CONFIG_440GR)
+    defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+	defined(CONFIG_440SP)
 	print_str ("procfreq",	    strmhz(buf, bd->bi_procfreq));
 	print_str ("plb_busfreq",   strmhz(buf, bd->bi_plb_busfreq));
 #if defined(CONFIG_405GP) || defined(CONFIG_405EP) || defined(CONFIG_XILINX_ML300) || \
-    defined(CONFIG_440EP) || defined(CONFIG_440GR)
+    defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SPE)
 	print_str ("pci_busfreq",   strmhz(buf, bd->bi_pci_busfreq));
 #endif
 #else	/* ! CONFIG_405GP, CONFIG_405CR, CONFIG_405EP, CONFIG_XILINX_ML300, CONFIG_440EP CONFIG_440GR */
diff --git a/common/cmd_ide.c b/common/cmd_ide.c
index 41621ba982..a4155029a7 100644
--- a/common/cmd_ide.c
+++ b/common/cmd_ide.c
@@ -855,7 +855,7 @@ output_data_short(int dev, ulong *sect_buf, int words)
 
 /* We only need to swap data if we are running on a big endian cpu. */
 /* But Au1x00 cpu:s already swaps data in big endian mode! */
-#if defined(__LITTLE_ENDIAN) || defined(CONFIG_AU1X00)
+#if defined(__LITTLE_ENDIAN) || ( defined(CONFIG_AU1X00) && !defined(CONFIG_GTH2) )
 #define input_swap_data(x,y,z) input_data(x,y,z)
 #else
 static void
@@ -881,8 +881,13 @@ input_swap_data(int dev, ulong *sect_buf, int words)
 	debug("in input swap data base for read is %lx\n", (unsigned long) pbuf);
 
 	while (words--) {
+#ifdef __MIPS__
+		*dbuf++ = swab16p((u16*)pbuf);
+		*dbuf++ = swab16p((u16*)pbuf);
+#else
 		*dbuf++ = ld_le16(pbuf);
 		*dbuf++ = ld_le16(pbuf);
+#endif /* !MIPS */
 	}
 #endif
 }
diff --git a/common/cmd_mem.c b/common/cmd_mem.c
index 0f4f9b73df..d0fae6b24c 100644
--- a/common/cmd_mem.c
+++ b/common/cmd_mem.c
@@ -707,7 +707,7 @@ int do_mem_mtest (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 #if defined(CFG_MEMTEST_SCRATCH)
 	vu_long *dummy = (vu_long*)CFG_MEMTEST_SCRATCH;
 #else
-	vu_long *dummy = NULL;
+	vu_long *dummy = 0;	/* yes, this is address 0x0, not NULL */
 #endif
 	int	j;
 	int iterations = 1;
diff --git a/common/cmd_mii.c b/common/cmd_mii.c
index 48a4e77c55..ee5e43ee8c 100644
--- a/common/cmd_mii.c
+++ b/common/cmd_mii.c
@@ -57,6 +57,11 @@ int do_mii (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 	int		rcode = 0;
 	char		*devname;
 
+	if (argc < 2) {
+		printf ("Usage:\n%s\n", cmdtp->usage);
+		return 1;
+	}
+
 #if defined(CONFIG_8xx) || defined(CONFIG_MCF52x2)
 	mii_init ();
 #endif
diff --git a/common/cmd_pcmcia.c b/common/cmd_pcmcia.c
index 8e3e84bed9..2eb5b26f2c 100644
--- a/common/cmd_pcmcia.c
+++ b/common/cmd_pcmcia.c
@@ -57,75 +57,14 @@
 #include <command.h>
 #include <config.h>
 #include <pcmcia.h>
-#if defined(CONFIG_8xx)
-#include <mpc8xx.h>
-#endif
-#if defined(CONFIG_LWMON)
-#include <i2c.h>
-#endif
-#ifdef CONFIG_PXA_PCMCIA
-#include <asm/arch/pxa-regs.h>
-#endif
-
 #include <asm/io.h>
 
-#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) || \
-    ((CONFIG_COMMANDS & CFG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD))
-
-int pcmcia_on (void);
-
-#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
-static int  pcmcia_off (void);
-#endif
-
-#ifdef CONFIG_I82365
-
-extern int i82365_init (void);
-extern void i82365_exit (void);
-
-#else /* ! CONFIG_I82365 */
-
-#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
-static int  hardware_disable(int slot);
-#endif
-static int  hardware_enable (int slot);
-static int  voltage_set(int slot, int vcc, int vpp);
-
-#if (! defined(CONFIG_I82365)) && (! defined(CONFIG_PXA_PCMCIA))
-static u_int m8xx_get_graycode(u_int size);
-#endif	/* !CONFIG_I82365, !CONFIG_PXA_PCMCIA */
-#if 0
-static u_int m8xx_get_speed(u_int ns, u_int is_io);
-#endif
-
 /* -------------------------------------------------------------------- */
 
-#ifndef CONFIG_PXA_PCMCIA
-
-/* look up table for pgcrx registers */
-
-static u_int *pcmcia_pgcrx[2] = {
-	&((immap_t *)CFG_IMMR)->im_pcmcia.pcmc_pgcra,
-	&((immap_t *)CFG_IMMR)->im_pcmcia.pcmc_pgcrb,
-};
-#define PCMCIA_PGCRX(slot)	(*pcmcia_pgcrx[slot])
+#if	(CONFIG_COMMANDS & CFG_CMD_PCMCIA)
 
-#endif	/* CONFIG_PXA_PCMCIA */
-
-#endif /* CONFIG_I82365 */
-
-#if defined(CONFIG_IDE_8xx_PCCARD)  || defined(CONFIG_PXA_PCMCIA)
-static void print_funcid (int func);
-static void print_fixed  (volatile uchar *p);
-static int  identify     (volatile uchar *p);
-static int  check_ide_device (int slot);
-#endif	/* CONFIG_IDE_8xx_PCCARD, CONFIG_PXA_PCMCIA */
-
-const char *indent = "\t   ";
-
-/* -------------------------------------------------------------------- */
-
-#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+extern int pcmcia_on (void);
+extern int pcmcia_off (void);
 
 int do_pinit (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 {
@@ -136,7 +75,7 @@ int do_pinit (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		return 1;
 	}
 	if (strcmp(argv[1],"on") == 0) {
-	     	rcode = pcmcia_on ();
+		rcode = pcmcia_on ();
 	} else if (strcmp(argv[1],"off") == 0) {
 		rcode = pcmcia_off ();
 	} else {
@@ -146,2656 +85,82 @@ int do_pinit (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 	return rcode;
 }
-#endif	/* CFG_CMD_PCMCIA */
-
-/* -------------------------------------------------------------------- */
-
-#ifdef CONFIG_I82365
-int pcmcia_on (void)
-{
-	u_int rc;
-
-	debug ("Enable PCMCIA " PCMCIA_SLOT_MSG "\n");
 
-	rc = i82365_init();
+U_BOOT_CMD(
+	pinit,	2,	1,	do_pinit,
+	"pinit   - PCMCIA sub-system\n",
+	"on  - power on PCMCIA socket\n"
+			"pinit off - power off PCMCIA socket\n"
+	  );
 
-	if (rc == 0) {
-		rc = check_ide_device(0);
-	}
+#endif	/* CONFIG_COMMANDS & CFG_CMD_PCMCIA */
 
-	return (rc);
-}
-#else
+/* -------------------------------------------------------------------- */
 
-#ifndef CONFIG_PXA_PCMCIA
+#undef	CHECK_IDE_DEVICE
 
-#ifdef CONFIG_HMI10
-# define  HMI10_FRAM_TIMING	(PCMCIA_SHT(2) | PCMCIA_SST(2) | PCMCIA_SL(4))
+#if	(CONFIG_COMMANDS & CFG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD)
+#define	CHECK_IDE_DEVICE
 #endif
-#if defined(CONFIG_LWMON) || defined(CONFIG_NSCU)
-# define  CFG_PCMCIA_TIMING	(PCMCIA_SHT(9) | PCMCIA_SST(3) | PCMCIA_SL(12))
-#else
-# define  CFG_PCMCIA_TIMING	(PCMCIA_SHT(2) | PCMCIA_SST(4) | PCMCIA_SL(9))
+
+#if	defined(CONFIG_PXA_PCMCIA)
+#define	CHECK_IDE_DEVICE
 #endif
 
-int pcmcia_on (void)
-{
-	int i;
-	u_long reg, base;
-	pcmcia_win_t *win;
-	u_int slotbit;
-	u_int rc, slot;
+#ifdef	CHECK_IDE_DEVICE
 
-	debug ("Enable PCMCIA " PCMCIA_SLOT_MSG "\n");
+int		ide_devices_found;
+static uchar	*known_cards[] = {
+	(uchar *)"ARGOSY PnPIDE D5",
+	NULL
+};
 
-	/* intialize the fixed memory windows */
-	win = (pcmcia_win_t *)(&((immap_t *)CFG_IMMR)->im_pcmcia.pcmc_pbr0);
-	base = CFG_PCMCIA_MEM_ADDR;
+#define	MAX_TUPEL_SZ	512
+#define MAX_FEATURES	4
 
-	if((reg = m8xx_get_graycode(CFG_PCMCIA_MEM_SIZE)) == -1) {
-		printf ("Cannot set window size to 0x%08x\n",
-			CFG_PCMCIA_MEM_SIZE);
-		return (1);
-	}
+#define MAX_IDENT_CHARS		64
+#define	MAX_IDENT_FIELDS	4
 
-	slotbit = PCMCIA_SLOT_x;
-	for (i=0; i<PCMCIA_MEM_WIN_NO; ++i) {
-		win->br = base;
+#define	indent	"\t   "
 
-#if (PCMCIA_SOCKETS_NO == 2)
-		if (i == 4) /* Another slot starting from win 4 */
-			slotbit = (slotbit ? PCMCIA_PSLOT_A : PCMCIA_PSLOT_B);
-#endif
-		switch (i) {
-#ifdef CONFIG_IDE_8xx_PCCARD
-		case 4:
-#ifdef CONFIG_HMI10
-		    {	/* map FRAM area */
-			win->or = (	PCMCIA_BSIZE_256K
-				|	PCMCIA_PPS_8
-				|	PCMCIA_PRS_ATTR
-				|	slotbit
-				|	PCMCIA_PV
-				|	HMI10_FRAM_TIMING );
-			break;
-		    }
-#endif
-		case 0:	{	/* map attribute memory */
-			win->or = (	PCMCIA_BSIZE_64M
-				|	PCMCIA_PPS_8
-				|	PCMCIA_PRS_ATTR
-				|	slotbit
-				|	PCMCIA_PV
-				|	CFG_PCMCIA_TIMING );
+static void print_funcid (int func)
+{
+	puts (indent);
+	switch (func) {
+		case CISTPL_FUNCID_MULTI:
+			puts (" Multi-Function");
 			break;
-		    }
-		case 5:
-		case 1: {	/* map I/O window for data reg */
-			win->or = (	PCMCIA_BSIZE_1K
-				|	PCMCIA_PPS_16
-				|	PCMCIA_PRS_IO
-				|	slotbit
-				|	PCMCIA_PV
-				|	CFG_PCMCIA_TIMING );
+		case CISTPL_FUNCID_MEMORY:
+			puts (" Memory");
 			break;
-		    }
-		case 6:
-		case 2: {	/* map I/O window for cmd/ctrl reg block */
-			win->or = (	PCMCIA_BSIZE_1K
-				|	PCMCIA_PPS_8
-				|	PCMCIA_PRS_IO
-				|	slotbit
-				|	PCMCIA_PV
-				|	CFG_PCMCIA_TIMING );
+		case CISTPL_FUNCID_SERIAL:
+			puts (" Serial Port");
 			break;
-		    }
-#endif	/* CONFIG_IDE_8xx_PCCARD */
-#ifdef CONFIG_HMI10
-		case 3: {	/* map I/O window for 4xUART data/ctrl */
-			win->br += 0x40000;
-			win->or = (	PCMCIA_BSIZE_256K
-				|	PCMCIA_PPS_8
-				|	PCMCIA_PRS_IO
-				|	slotbit
-				|	PCMCIA_PV
-				|	CFG_PCMCIA_TIMING );
+		case CISTPL_FUNCID_PARALLEL:
+			puts (" Parallel Port");
 			break;
-		    }
-#endif /* CONFIG_HMI10 */
-		default:	/* set to not valid */
-			win->or = 0;
+		case CISTPL_FUNCID_FIXED:
+			puts (" Fixed Disk");
 			break;
-		}
-
-		debug ("MemWin %d: PBR 0x%08lX  POR %08lX\n",
-			i, win->br, win->or);
-		base += CFG_PCMCIA_MEM_SIZE;
-		++win;
-	}
-
-	for (i=0, rc=0, slot=_slot_; i<PCMCIA_SOCKETS_NO; i++, slot = !slot) {
-		/* turn off voltage */
-		if ((rc = voltage_set(slot, 0, 0)))
-			continue;
-
-		/* Enable external hardware */
-		if ((rc = hardware_enable(slot)))
-			continue;
-
-#ifdef CONFIG_IDE_8xx_PCCARD
-		if ((rc = check_ide_device(i)))
-			continue;
-#endif
-	}
-	return (rc);
-}
-
-#endif /* CONFIG_PXA_PCMCIA */
-
-#endif /* CONFIG_I82365 */
-
-#ifdef CONFIG_PXA_PCMCIA
-
-static int hardware_enable (int slot)
-{
-	return 0;	/* No hardware to enable */
-}
-
-static int hardware_disable(int slot)
-{
-	return 0;	/* No hardware to disable */
-}
-
-static int voltage_set(int slot, int vcc, int vpp)
-{
-	return 0;
-}
-
-void msWait(unsigned msVal)
-{
-	udelay(msVal*1000);
-}
-
-int pcmcia_on (void)
-{
-	unsigned int reg_arr[] = {
-		0x48000028, CFG_MCMEM0_VAL,
-		0x4800002c, CFG_MCMEM1_VAL,
-		0x48000030, CFG_MCATT0_VAL,
-		0x48000034, CFG_MCATT1_VAL,
-		0x48000038, CFG_MCIO0_VAL,
-		0x4800003c, CFG_MCIO1_VAL,
-
-		0, 0
-	};
-	int i, rc;
-
-#ifdef CONFIG_EXADRON1
-	int cardDetect;
-	volatile unsigned int *v_pBCRReg =
-		(volatile unsigned int *) 0x08000000;
-#endif
-
-	debug ("%s\n", __FUNCTION__);
-
-	i = 0;
-	while (reg_arr[i])
-		*((volatile unsigned int *) reg_arr[i++]) |= reg_arr[i++];
-	udelay (1000);
-
-	debug ("%s: programmed mem controller \n", __FUNCTION__);
-
-#ifdef CONFIG_EXADRON1
-
-/*define useful BCR masks */
-#define BCR_CF_INIT_VAL  		    0x00007230
-#define BCR_CF_PWRON_BUSOFF_RESETOFF_VAL    0x00007231
-#define BCR_CF_PWRON_BUSOFF_RESETON_VAL     0x00007233
-#define BCR_CF_PWRON_BUSON_RESETON_VAL      0x00007213
-#define BCR_CF_PWRON_BUSON_RESETOFF_VAL     0x00007211
-
-	/* we see from the GPIO bit if the card is present */
-	cardDetect = !(GPLR0 & GPIO_bit (14));
-
-	if (cardDetect) {
-		printf ("No PCMCIA card found!\n");
-	}
-
-	/* reset the card via the BCR line */
-	*v_pBCRReg = (unsigned) BCR_CF_INIT_VAL;
-	msWait (500);
-
-	*v_pBCRReg = (unsigned) BCR_CF_PWRON_BUSOFF_RESETOFF_VAL;
-	msWait (500);
-
-	*v_pBCRReg = (unsigned) BCR_CF_PWRON_BUSOFF_RESETON_VAL;
-	msWait (500);
-
-	*v_pBCRReg = (unsigned) BCR_CF_PWRON_BUSON_RESETON_VAL;
-	msWait (500);
-
-	*v_pBCRReg = (unsigned) BCR_CF_PWRON_BUSON_RESETOFF_VAL;
-	msWait (1500);
-
-	/* enable address bus */
-	GPCR1 = 0x01;
-	/* and the first CF slot */
-	MECR = 0x00000002;
-
-#endif /* EXADRON 1 */
-
-	rc = check_ide_device (0);	/* use just slot 0 */
-
-	return rc;
-}
-
-#endif /* CONFIG_PXA_PCMCIA */
-
-/* -------------------------------------------------------------------- */
-
-#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
-
-#ifdef CONFIG_I82365
-static int pcmcia_off (void)
-{
-	printf ("Disable PCMCIA " PCMCIA_SLOT_MSG "\n");
-
-	i82365_exit();
-
-	return 0;
-}
-#else
-
-#ifndef CONFIG_PXA_PCMCIA
-
-static int pcmcia_off (void)
-{
-	int i;
-	pcmcia_win_t *win;
-
-	printf ("Disable PCMCIA " PCMCIA_SLOT_MSG "\n");
-
-	/* clear interrupt state, and disable interrupts */
-	((immap_t *)CFG_IMMR)->im_pcmcia.pcmc_pscr =  PCMCIA_MASK(_slot_);
-	((immap_t *)CFG_IMMR)->im_pcmcia.pcmc_per &= ~PCMCIA_MASK(_slot_);
-
-	/* turn off interrupt and disable CxOE */
-	PCMCIA_PGCRX(_slot_) = __MY_PCMCIA_GCRX_CXOE;
-
-	/* turn off memory windows */
-	win = (pcmcia_win_t *)(&((immap_t *)CFG_IMMR)->im_pcmcia.pcmc_pbr0);
-
-	for (i=0; i<PCMCIA_MEM_WIN_NO; ++i) {
-		/* disable memory window */
-		win->or = 0;
-		++win;
-	}
-
-	/* turn off voltage */
-	voltage_set(_slot_, 0, 0);
-
-	/* disable external hardware */
-	printf ("Shutdown and Poweroff " PCMCIA_SLOT_MSG "\n");
-	hardware_disable(_slot_);
-	return 0;
-}
-
-#endif /* CONFIG_PXA_PCMCIA */
-
-#endif /* CONFIG_I82365 */
-
-#ifdef CONFIG_PXA_PCMCIA
-static int pcmcia_off (void)
-{
-	return 0;
-}
-#endif
-
-#endif	/* CFG_CMD_PCMCIA */
-
-/* -------------------------------------------------------------------- */
-
-#if defined(CONFIG_IDE_8xx_PCCARD) || defined(CONFIG_PXA_PCMCIA)
-
-#define	MAX_TUPEL_SZ	512
-#define MAX_FEATURES	4
-
-int ide_devices_found;
-static int check_ide_device (int slot)
-{
-	volatile uchar *ident = NULL;
-	volatile uchar *feature_p[MAX_FEATURES];
-	volatile uchar *p, *start, *addr;
-	int n_features = 0;
-	uchar func_id = ~0;
-	uchar code, len;
-	ushort config_base = 0;
-	int found = 0;
-	int i;
-
-	addr = (volatile uchar *)(CFG_PCMCIA_MEM_ADDR +
-				  CFG_PCMCIA_MEM_SIZE * (slot * 4));
-	debug ("PCMCIA MEM: %08lX\n", (ulong)addr);
-
-	start = p = (volatile uchar *) addr;
-
-	while ((p - start) < MAX_TUPEL_SZ) {
-
-		code = *p; p += 2;
-
-		if (code == 0xFF) { /* End of chain */
+		case CISTPL_FUNCID_VIDEO:
+			puts (" Video Adapter");
 			break;
-		}
-
-		len = *p; p += 2;
-#if defined(DEBUG) && (DEBUG > 1)
-		{ volatile uchar *q = p;
-			printf ("\nTuple code %02x  length %d\n\tData:",
-				code, len);
-
-			for (i = 0; i < len; ++i) {
-				printf (" %02x", *q);
-				q+= 2;
-			}
-		}
-#endif	/* DEBUG */
-		switch (code) {
-		case CISTPL_VERS_1:
-			ident = p + 4;
+		case CISTPL_FUNCID_NETWORK:
+			puts (" Network Adapter");
 			break;
-		case CISTPL_FUNCID:
-			/* Fix for broken SanDisk which may have 0x80 bit set */
-			func_id = *p & 0x7F;
+		case CISTPL_FUNCID_AIMS:
+			puts (" AIMS Card");
 			break;
-		case CISTPL_FUNCE:
-			if (n_features < MAX_FEATURES)
-				feature_p[n_features++] = p;
+		case CISTPL_FUNCID_SCSI:
+			puts (" SCSI Adapter");
 			break;
-		case CISTPL_CONFIG:
-			config_base = (*(p+6) << 8) + (*(p+4));
-			debug ("\n## Config_base = %04x ###\n", config_base);
 		default:
+			puts (" Unknown");
 			break;
-		}
-		p += 2 * len;
-	}
-
-	found = identify (ident);
-
-	if (func_id != ((uchar)~0)) {
-		print_funcid (func_id);
-
-		if (func_id == CISTPL_FUNCID_FIXED)
-			found = 1;
-		else
-			return (1);	/* no disk drive */
-	}
-
-	for (i=0; i<n_features; ++i) {
-		print_fixed (feature_p[i]);
-	}
-
-	if (!found) {
-		printf ("unknown card type\n");
-		return (1);
-	}
-
-	ide_devices_found |= (1 << slot);
-
-#if CONFIG_CPC45
-#else
-	/* set I/O area in config reg -> only valid for ARGOSY D5!!! */
-	*((uchar *)(addr + config_base)) = 1;
-#endif
-#if 0
-	printf("\n## Config_base = %04x ###\n", config_base);
-	printf("Configuration Option Register: %02x @ %x\n", readb(addr + config_base), addr + config_base);
-	printf("Card Configuration and Status Register: %02x\n", readb(addr + config_base + 2));
-	printf("Pin Replacement Register Register: %02x\n", readb(addr + config_base + 4));
-	printf("Socket and Copy Register: %02x\n", readb(addr + config_base + 6));
-#endif
-	return (0);
-}
-#endif	/* CONFIG_IDE_8xx_PCCARD */
-
-/* -------------------------------------------------------------------- */
-
-
-/* -------------------------------------------------------------------- */
-/* board specific stuff:						*/
-/* voltage_set(), hardware_enable() and hardware_disable()		*/
-/* -------------------------------------------------------------------- */
-
-/* -------------------------------------------------------------------- */
-/* RPX Boards from Embedded Planet					*/
-/* -------------------------------------------------------------------- */
-
-#if defined(CONFIG_RPXCLASSIC) || defined(CONFIG_RPXLITE)
-
-/* The RPX boards seems to have it's bus monitor timeout set to 6*8 clocks.
- * SYPCR is write once only, therefore must the slowest memory be faster
- * than the bus monitor or we will get a machine check due to the bus timeout.
- */
-
-#define PCMCIA_BOARD_MSG "RPX CLASSIC or RPX LITE"
-
-#undef PCMCIA_BMT_LIMIT
-#define PCMCIA_BMT_LIMIT (6*8)
-
-static int voltage_set(int slot, int vcc, int vpp)
-{
-	u_long reg = 0;
-
-	switch(vcc) {
-	case 0: break;
-	case 33: reg |= BCSR1_PCVCTL4; break;
-	case 50: reg |= BCSR1_PCVCTL5; break;
-	default: return 1;
-	}
-
-	switch(vpp) {
-	case 0: break;
-	case 33:
-	case 50:
-		if(vcc == vpp)
-			reg |= BCSR1_PCVCTL6;
-		else
-			return 1;
-		break;
-	case 120:
-		reg |= BCSR1_PCVCTL7;
-	default: return 1;
-	}
-
-	if(vcc == 120)
-	   return 1;
-
-	/* first, turn off all power */
-
-	*((uint *)RPX_CSR_ADDR) &= ~(BCSR1_PCVCTL4 | BCSR1_PCVCTL5
-				     | BCSR1_PCVCTL6 | BCSR1_PCVCTL7);
-
-	/* enable new powersettings */
-
-	*((uint *)RPX_CSR_ADDR) |= reg;
-
-	return 0;
-}
-
-#define socket_get(_slot_) PCMCIA_SOCKET_KEY_5V
-static int hardware_enable (int slot)
-{
-	return 0;	/* No hardware to enable */
-}
-#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
-static int hardware_disable(int slot)
-{
-	return 0;	/* No hardware to disable */
-}
-#endif	/* CFG_CMD_PCMCIA */
-#endif	/* CONFIG_RPXCLASSIC */
-
-/* -------------------------------------------------------------------- */
-/* (F)ADS Boards from Motorola						*/
-/* -------------------------------------------------------------------- */
-
-#if defined(CONFIG_ADS) || defined(CONFIG_FADS)
-
-#ifdef CONFIG_ADS
-#define PCMCIA_BOARD_MSG "ADS"
-#define PCMCIA_GLITCHY_CD  /* My ADS board needs this */
-#else
-#define PCMCIA_BOARD_MSG "FADS"
-#endif
-
-static int voltage_set(int slot, int vcc, int vpp)
-{
-	u_long reg = 0;
-
-	switch(vpp) {
-	case 0: reg = 0; break;
-	case 50: reg = 1; break;
-	case 120: reg = 2; break;
-	default: return 1;
-	}
-
-	switch(vcc) {
-	case 0: reg = 0; break;
-#ifdef CONFIG_ADS
-	case 50: reg = BCSR1_PCCVCCON; break;
-#endif
-#ifdef CONFIG_FADS
-	case 33: reg = BCSR1_PCCVCC0 | BCSR1_PCCVCC1; break;
-	case 50: reg = BCSR1_PCCVCC1; break;
-#endif
-	default: return 1;
-	}
-
-	/* first, turn off all power */
-
-#ifdef CONFIG_ADS
-	*((uint *)BCSR1) |= BCSR1_PCCVCCON;
-#endif
-#ifdef CONFIG_FADS
-	*((uint *)BCSR1) &= ~(BCSR1_PCCVCC0 | BCSR1_PCCVCC1);
-#endif
-	*((uint *)BCSR1) &= ~BCSR1_PCCVPP_MASK;
-
-	/* enable new powersettings */
-
-#ifdef CONFIG_ADS
-	*((uint *)BCSR1) &= ~reg;
-#endif
-#ifdef CONFIG_FADS
-	*((uint *)BCSR1) |= reg;
-#endif
-
- 	*((uint *)BCSR1) |= reg << 20;
-
-	return 0;
-}
-
-#define socket_get(_slot_) PCMCIA_SOCKET_KEY_5V
-
-static int hardware_enable(int slot)
-{
-	*((uint *)BCSR1) &= ~BCSR1_PCCEN;
-	return 0;
-}
-
-#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
-static int hardware_disable(int slot)
-{
-	*((uint *)BCSR1) &= ~BCSR1_PCCEN;
-	return 0;
-}
-#endif	/* CFG_CMD_PCMCIA */
-
-#endif	/* (F)ADS */
-
-/* -------------------------------------------------------------------- */
-/* TQM8xxL Boards by TQ Components					*/
-/* SC8xx   Boards by SinoVee Microsystems				*/
-/* -------------------------------------------------------------------- */
-
-#if (defined(CONFIG_TQM8xxL) || defined(CONFIG_SVM_SC8xx)) \
-	&& !defined(CONFIG_VIRTLAB2)
-
-#if defined(CONFIG_TQM8xxL)
-#define PCMCIA_BOARD_MSG "TQM8xxL"
-#endif
-#if defined(CONFIG_SVM_SC8xx)
-#define PCMCIA_BOARD_MSG "SC8xx"
-#endif
-
-static int hardware_enable(int slot)
-{
-	volatile immap_t	*immap;
-	volatile cpm8xx_t	*cp;
-	volatile pcmconf8xx_t	*pcmp;
-	volatile sysconf8xx_t	*sysp;
-	uint reg, mask;
-
-	debug ("hardware_enable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
-
-	udelay(10000);
-
-	immap = (immap_t *)CFG_IMMR;
-	sysp  = (sysconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_siu_conf));
-	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
-	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
-
-	/*
-	 * Configure SIUMCR to enable PCMCIA port B
-	 * (VFLS[0:1] are not used for debugging, we connect FRZ# instead)
-	 */
-	sysp->sc_siumcr &= ~SIUMCR_DBGC11;	/* set DBGC to 00 */
-
-	/* clear interrupt state, and disable interrupts */
-	pcmp->pcmc_pscr =  PCMCIA_MASK(slot);
-	pcmp->pcmc_per &= ~PCMCIA_MASK(slot);
-
-	/*
-	 * Disable interrupts, DMA, and PCMCIA buffers
-	 * (isolate the interface) and assert RESET signal
-	 */
-	debug ("Disable PCMCIA buffers and assert RESET\n");
-	reg  = 0;
-	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
-#ifndef NSCU_OE_INV
-	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
-#endif
-	PCMCIA_PGCRX(slot) = reg;
-	udelay(500);
-
-#ifndef CONFIG_HMI10
-#ifndef CONFIG_NSCU
-	/*
-	 * Configure Port C pins for
-	 * 5 Volts Enable and 3 Volts enable
-	 */
-	immap->im_ioport.iop_pcpar &= ~(0x0002 | 0x0004);
-	immap->im_ioport.iop_pcso  &= ~(0x0002 | 0x0004);
-	/* remove all power */
-
-	immap->im_ioport.iop_pcdat &= ~(0x0002 | 0x0004);
-#endif
-#else	/* CONFIG_HMI10 */
-	/*
-	 * Configure Port B  pins for
-	 * 5 Volts Enable and 3 Volts enable
-	 */
-	immap->im_cpm.cp_pbpar &= ~(0x00000300);
-
-	/* remove all power */
-	immap->im_cpm.cp_pbdat |= 0x00000300;
-#endif	/* CONFIG_HMI10 */
-
-	/*
-	 * Make sure there is a card in the slot, then configure the interface.
-	 */
-	udelay(10000);
-	debug ("[%d] %s: PIPR(%p)=0x%x\n",
-		__LINE__,__FUNCTION__,
-		&(pcmp->pcmc_pipr),pcmp->pcmc_pipr);
-#ifndef CONFIG_HMI10
-	if (pcmp->pcmc_pipr & (0x18000000 >> (slot << 4))) {
-#else
-	if (pcmp->pcmc_pipr & (0x10000000 >> (slot << 4))) {
-#endif	/* CONFIG_HMI10 */
-		printf ("   No Card found\n");
-		return (1);
-	}
-
-	/*
-	 * Power On.
-	 */
-	mask = PCMCIA_VS1(slot) | PCMCIA_VS2(slot);
-	reg  = pcmp->pcmc_pipr;
-	debug ("PIPR: 0x%x ==> VS1=o%s, VS2=o%s\n",
-		reg,
-		(reg&PCMCIA_VS1(slot))?"n":"ff",
-		(reg&PCMCIA_VS2(slot))?"n":"ff");
-#ifndef CONFIG_NSCU
-	if ((reg & mask) == mask) {
-#ifndef CONFIG_HMI10
-		immap->im_ioport.iop_pcdat |= 0x0004;
-#else
-		immap->im_cpm.cp_pbdat &= ~(0x0000100);
-#endif	/* CONFIG_HMI10 */
-		puts (" 5.0V card found: ");
-	} else {
-#ifndef CONFIG_HMI10
-		immap->im_ioport.iop_pcdat |= 0x0002;
-#else
-		immap->im_cpm.cp_pbdat &= ~(0x0000200);
-#endif	/* CONFIG_HMI10 */
-		puts (" 3.3V card found: ");
-	}
-#ifndef CONFIG_HMI10
-	immap->im_ioport.iop_pcdir |= (0x0002 | 0x0004);
-#else
-	immap->im_cpm.cp_pbdir |= 0x00000300;
-#endif	/* CONFIG_HMI10 */
-#else
-	if ((reg & mask) == mask) {
-		puts (" 5.0V card found: ");
-	} else {
-		puts (" 3.3V card found: ");
-	}
-#endif
-#if 0
-	/*  VCC switch error flag, PCMCIA slot INPACK_ pin */
-	cp->cp_pbdir &= ~(0x0020 | 0x0010);
-	cp->cp_pbpar &= ~(0x0020 | 0x0010);
-	udelay(500000);
-#endif
-	udelay(1000);
-	debug ("Enable PCMCIA buffers and stop RESET\n");
-	reg  =  PCMCIA_PGCRX(slot);
-	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
-#ifndef NSCU_OE_INV
-	reg &= ~__MY_PCMCIA_GCRX_CXOE;		/* active low  */
-#else
-	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
-#endif
-	PCMCIA_PGCRX(slot) = reg;
-
-	udelay(250000);	/* some cards need >150 ms to come up :-( */
-
-	debug ("# hardware_enable done\n");
-
-	return (0);
-}
-
-
-#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
-static int hardware_disable(int slot)
-{
-	volatile immap_t	*immap;
-	volatile pcmconf8xx_t	*pcmp;
-	u_long reg;
-
-	debug ("hardware_disable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
-
-	immap = (immap_t *)CFG_IMMR;
-	pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
-
-#ifndef CONFIG_HMI10
-#ifndef CONFIG_NSCU
-	/* remove all power */
-	immap->im_ioport.iop_pcdat &= ~(0x0002 | 0x0004);
-#endif
-#else	/* CONFIG_HMI10 */
-	immap->im_cpm.cp_pbdat |= 0x00000300;
-#endif	/* CONFIG_HMI10 */
-
-	debug ("Disable PCMCIA buffers and assert RESET\n");
-	reg  = 0;
-	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
-#ifndef NSCU_OE_INV
-	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
-#endif
-	PCMCIA_PGCRX(slot) = reg;
-
-	udelay(10000);
-
-	return (0);
-}
-#endif	/* CFG_CMD_PCMCIA */
-
-#ifdef CONFIG_NSCU
-static int voltage_set(int slot, int vcc, int vpp)
-{
-	return 0;
-}
-#else
-static int voltage_set(int slot, int vcc, int vpp)
-{
-	volatile immap_t	*immap;
-	volatile pcmconf8xx_t	*pcmp;
-	u_long reg;
-
-	debug ("voltage_set: "
-		PCMCIA_BOARD_MSG
-		" Slot %c, Vcc=%d.%d, Vpp=%d.%d\n",
-		'A'+slot, vcc/10, vcc%10, vpp/10, vcc%10);
-
-	immap = (immap_t *)CFG_IMMR;
-	pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
-	/*
-	 * Disable PCMCIA buffers (isolate the interface)
-	 * and assert RESET signal
-	 */
-	debug ("Disable PCMCIA buffers and assert RESET\n");
-	reg  = PCMCIA_PGCRX(slot);
-	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
-#ifndef NSCU_OE_INV
-	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
-#else
-	reg &= ~__MY_PCMCIA_GCRX_CXOE;		/* active low  */
-#endif
-	PCMCIA_PGCRX(slot) = reg;
-	udelay(500);
-
-#ifndef CONFIG_HMI10
-	/*
-	 * Configure Port C pins for
-	 * 5 Volts Enable and 3 Volts enable,
-	 * Turn off all power
-	 */
-	debug ("PCMCIA power OFF\n");
-	immap->im_ioport.iop_pcpar &= ~(0x0002 | 0x0004);
-	immap->im_ioport.iop_pcso  &= ~(0x0002 | 0x0004);
-	immap->im_ioport.iop_pcdat &= ~(0x0002 | 0x0004);
-
-	reg = 0;
-	switch(vcc) {
-	case  0: 		break;
-	case 33: reg |= 0x0002;	break;
-	case 50: reg |= 0x0004;	break;
-	default: 		goto done;
-	}
-#else	/* CONFIG_HMI10 */
-	/*
-	 * Configure Port B pins for
-	 * 5 Volts Enable and 3 Volts enable,
-	 * Turn off all power
-	 */
-	debug ("PCMCIA power OFF\n");
-	immap->im_cpm.cp_pbpar &= ~(0x00000300);
-	/* remove all power */
-
-	immap->im_cpm.cp_pbdat |= 0x00000300;
-
-	reg = 0;
-	switch(vcc) {
-		case  0:			break;
-		case 33: reg |= 0x00000200;	break;
-		case 50: reg |= 0x00000100;	break;
-		default:			goto done;
-}
-#endif	/* CONFIG_HMI10 */
-
-	/* Checking supported voltages */
-
-	debug ("PIPR: 0x%x --> %s\n",
-		pcmp->pcmc_pipr,
-		(pcmp->pcmc_pipr & 0x00008000) ? "only 5 V" : "can do 3.3V");
-
-#ifndef CONFIG_HMI10
-	immap->im_ioport.iop_pcdat |= reg;
-	immap->im_ioport.iop_pcdir |= (0x0002 | 0x0004);
-#else
-	immap->im_cpm.cp_pbdat &= !reg;
-	immap->im_cpm.cp_pbdir |= 0x00000300;
-#endif	/* CONFIG_HMI10 */
-	if (reg) {
-#ifndef CONFIG_HMI10
-		debug ("PCMCIA powered at %sV\n",
-			(reg&0x0004) ? "5.0" : "3.3");
-#else
-		debug ("PCMCIA powered at %sV\n",
-			(reg&0x00000200) ? "5.0" : "3.3");
-#endif	/* CONFIG_HMI10 */
-	} else {
-		debug ("PCMCIA powered down\n");
-	}
-
-done:
-	debug ("Enable PCMCIA buffers and stop RESET\n");
-	reg  =  PCMCIA_PGCRX(slot);
-	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
-#ifndef NSCU_OE_INV
-	reg &= ~__MY_PCMCIA_GCRX_CXOE;		/* active low  */
-#else
-	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
-#endif
-	PCMCIA_PGCRX(slot) = reg;
-	udelay(500);
-
-	debug ("voltage_set: " PCMCIA_BOARD_MSG " Slot %c, DONE\n",
-		slot+'A');
-	return (0);
-}
-#endif
-
-#endif	/* TQM8xxL */
-
-/* -------------------------------------------------------------------- */
-/* Virtlab2 Board by TQ Components					*/
-/* -------------------------------------------------------------------- */
-
-#if defined(CONFIG_VIRTLAB2)
-#define PCMCIA_BOARD_MSG "Virtlab2"
-
-static int hardware_enable(int slot)
-{
-	volatile pcmconf8xx_t	*pcmp =
-		(pcmconf8xx_t *)&(((immap_t *)CFG_IMMR)->im_pcmcia);
-	volatile unsigned char	*powerctl =
-		(volatile unsigned char *)PCMCIA_CTRL;
-	volatile sysconf8xx_t	*sysp =
-		(sysconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_siu_conf));
-	unsigned int		reg, mask;
-
-	debug ("hardware_enable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
-
-	udelay(10000);
-
-	/*
-	 * Configure SIUMCR to enable PCMCIA port B
-	 */
-	sysp->sc_siumcr &= ~SIUMCR_DBGC11;	/* set DBGC to 00 */
-
-	/* clear interrupt state, and disable interrupts */
-	pcmp->pcmc_pscr =  PCMCIA_MASK(slot);
-	pcmp->pcmc_per &= ~PCMCIA_MASK(slot);
-
-	/*
-	 * Disable interrupts, DMA, and PCMCIA buffers
-	 * (isolate the interface) and assert RESET signal
-	 */
-	debug ("Disable PCMCIA buffers and assert RESET\n");
-	reg = __MY_PCMCIA_GCRX_CXRESET;		/* active high */
-	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
-
-	PCMCIA_PGCRX(slot) = reg;
-	udelay(500);
-
-	/* remove all power */
-	*powerctl = 0;
-
-	/*
-	 * Make sure there is a card in the slot, then configure the interface.
-	 */
-	udelay(10000);
-	debug ("[%d] %s: PIPR(%p)=0x%x\n", __LINE__,__FUNCTION__,
-		&(pcmp->pcmc_pipr),pcmp->pcmc_pipr);
-
-	if (pcmp->pcmc_pipr & (0x18000000 >> (slot << 4))) {
-		printf ("   No Card found\n");
-		return (1);
-	}
-
-	/*
-	 * Power On.
-	 */
-	mask = PCMCIA_VS1(slot) | PCMCIA_VS2(slot);
-	reg  = pcmp->pcmc_pipr;
-	debug ("PIPR: 0x%x ==> VS1=o%s, VS2=o%s\n", reg,
-		(reg&PCMCIA_VS1(slot))?"n":"ff",
-		(reg&PCMCIA_VS2(slot))?"n":"ff");
-
-	if ((reg & mask) == mask) {
-		*powerctl = 2;	/* Enable 5V Vccout */
-		puts (" 5.0V card found: ");
-	} else {
-		*powerctl = 1;	/* Enable 3.3 V Vccout */
-		puts (" 3.3V card found: ");
-	}
-
-	udelay(1000);
-	debug ("Enable PCMCIA buffers and stop RESET\n");
-	reg  =  PCMCIA_PGCRX(slot);
-	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
-	reg &= ~__MY_PCMCIA_GCRX_CXOE;		/* active low  */
-
-	PCMCIA_PGCRX(slot) = reg;
-
-	udelay(250000);	/* some cards need >150 ms to come up :-( */
-
-	debug ("# hardware_enable done\n");
-
-	return (0);
-}
-
-#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
-static int hardware_disable(int slot)
-{
-	volatile unsigned char	*powerctl =
-		(volatile unsigned char *)PCMCIA_CTRL;
-	unsigned long		 reg;
-
-	debug ("hardware_disable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
-
-	/* remove all power */
-	*powerctl = 0;
-
-	debug ("Disable PCMCIA buffers and assert RESET\n");
-	reg = __MY_PCMCIA_GCRX_CXRESET;		/* active high */
-	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
-
-	PCMCIA_PGCRX(slot) = reg;
-
-	udelay(10000);
-
-	return (0);
-}
-#endif
-
-static int voltage_set(int slot, int vcc, int vpp)
-{
-#ifdef DEBUG
-	volatile pcmconf8xx_t	*pcmp =
-		(pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
-#endif
-	volatile unsigned char	*powerctl =
-		(volatile unsigned char *)PCMCIA_CTRL;
-	unsigned long		reg;
-
-	debug ("voltage_set: " PCMCIA_BOARD_MSG
-		" Slot %c, Vcc=%d.%d, Vpp=%d.%d\n",
-		'A'+slot, vcc/10, vcc%10, vpp/10, vcc%10);
-
-	/*
-	 * Disable PCMCIA buffers (isolate the interface)
-	 * and assert RESET signal
-	 */
-	debug ("Disable PCMCIA buffers and assert RESET\n");
-	reg  = PCMCIA_PGCRX(slot);
-	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
-	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
-
-	PCMCIA_PGCRX(slot) = reg;
-	udelay(500);
-
-	/*
-	 * Configure pins for 5 Volts Enable and 3 Volts enable,
-	 * Turn off all power.
-	 */
-	debug ("PCMCIA power OFF\n");
-	reg = 0;
-	switch(vcc) {
-	case  0: 		break;
-	case 33: reg = 0x0001;	break;
-	case 50: reg = 0x0002;	break;
-	default: 		goto done;
-	}
-
-	/* Checking supported voltages */
-
-	debug ("PIPR: 0x%x --> %s\n", pcmp->pcmc_pipr,
-		(pcmp->pcmc_pipr & 0x00008000) ? "only 5 V" : "can do 3.3V");
-
-	*powerctl = reg;
-
-	if (reg) {
-		debug ("PCMCIA powered at %sV\n", (reg&0x0004) ? "5.0" : "3.3");
-	} else {
-		debug ("PCMCIA powered down\n");
-	}
-
-done:
-	debug ("Enable PCMCIA buffers and stop RESET\n");
-	reg  =  PCMCIA_PGCRX(slot);
-	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
-	reg &= ~__MY_PCMCIA_GCRX_CXOE;		/* active low  */
-
-	PCMCIA_PGCRX(slot) = reg;
-	udelay(500);
-
-	debug ("voltage_set: " PCMCIA_BOARD_MSG " Slot %c, DONE\n", slot+'A');
-	return (0);
-}
-#endif	/* CONFIG_VIRTLAB2 */
-
-/* -------------------------------------------------------------------- */
-/* LWMON Board								*/
-/* -------------------------------------------------------------------- */
-
-#if defined(CONFIG_LWMON)
-
-#define PCMCIA_BOARD_MSG "LWMON"
-
-/* #define's for MAX1604 Power Switch */
-#define MAX1604_OP_SUS		0x80
-#define MAX1604_VCCBON		0x40
-#define MAX1604_VCC_35		0x20
-#define MAX1604_VCCBHIZ		0x10
-#define MAX1604_VPPBON		0x08
-#define MAX1604_VPPBPBPGM	0x04
-#define MAX1604_VPPBHIZ		0x02
-/* reserved			0x01	*/
-
-static int hardware_enable(int slot)
-{
-	volatile immap_t	*immap;
-	volatile cpm8xx_t	*cp;
-	volatile pcmconf8xx_t	*pcmp;
-	volatile sysconf8xx_t	*sysp;
-	uint reg, mask;
-	uchar val;
-
-
-	debug ("hardware_enable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
-
-	/* Switch on PCMCIA port in PIC register 0x60 */
-	reg = pic_read  (0x60);
-	debug ("[%d] PIC read: reg_60 = 0x%02x\n", __LINE__, reg);
-	reg &= ~0x10;
-	/* reg |= 0x08; Vpp not needed */
-	pic_write (0x60, reg);
-#ifdef DEBUG
-	reg = pic_read  (0x60);
-	printf ("[%d] PIC read: reg_60 = 0x%02x\n", __LINE__, reg);
-#endif
-	udelay(10000);
-
-	immap = (immap_t *)CFG_IMMR;
-	sysp  = (sysconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_siu_conf));
-	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
-	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
-
-	/*
-	 * Configure SIUMCR to enable PCMCIA port B
-	 * (VFLS[0:1] are not used for debugging, we connect FRZ# instead)
-	 */
-	sysp->sc_siumcr &= ~SIUMCR_DBGC11;	/* set DBGC to 00 */
-
-	/* clear interrupt state, and disable interrupts */
-	pcmp->pcmc_pscr =  PCMCIA_MASK(_slot_);
-	pcmp->pcmc_per &= ~PCMCIA_MASK(_slot_);
-
-	/*
-	 * Disable interrupts, DMA, and PCMCIA buffers
-	 * (isolate the interface) and assert RESET signal
-	 */
-	debug ("Disable PCMCIA buffers and assert RESET\n");
-	reg  = 0;
-	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
-	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
-	PCMCIA_PGCRX(_slot_) = reg;
-	udelay(500);
-
-	/*
-	 * Make sure there is a card in the slot, then configure the interface.
-	 */
-	udelay(10000);
-	debug ("[%d] %s: PIPR(%p)=0x%x\n",
-		__LINE__,__FUNCTION__,
-		&(pcmp->pcmc_pipr),pcmp->pcmc_pipr);
-	if (pcmp->pcmc_pipr & (0x18000000 >> (slot << 4))) {
-		printf ("   No Card found\n");
-		return (1);
-	}
-
-	/*
-	 * Power On.
-	 */
-	mask = PCMCIA_VS1(slot) | PCMCIA_VS2(slot);
-	reg  = pcmp->pcmc_pipr;
-	debug ("PIPR: 0x%x ==> VS1=o%s, VS2=o%s\n",
-		reg,
-		(reg&PCMCIA_VS1(slot))?"n":"ff",
-		(reg&PCMCIA_VS2(slot))?"n":"ff");
-	if ((reg & mask) == mask) {
-		val = 0;		/* VCCB3/5 = 0 ==> use Vx = 5.0 V */
-		puts (" 5.0V card found: ");
-	} else {
-		val = MAX1604_VCC_35;	/* VCCB3/5 = 1 ==> use Vy = 3.3 V */
-		puts (" 3.3V card found: ");
-	}
-
-	/*  switch VCC on */
-	val |= MAX1604_OP_SUS | MAX1604_VCCBON;
-	i2c_init  (CFG_I2C_SPEED, CFG_I2C_SLAVE);
-	i2c_write (CFG_I2C_POWER_A_ADDR, 0, 0, &val, 1);
-
-	udelay(500000);
-
-	debug ("Enable PCMCIA buffers and stop RESET\n");
-	reg  =  PCMCIA_PGCRX(_slot_);
-	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
-	reg &= ~__MY_PCMCIA_GCRX_CXOE;		/* active low  */
-	PCMCIA_PGCRX(_slot_) = reg;
-
-	udelay(250000);	/* some cards need >150 ms to come up :-( */
-
-	debug ("# hardware_enable done\n");
-
-	return (0);
-}
-
-
-#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
-static int hardware_disable(int slot)
-{
-	volatile immap_t	*immap;
-	volatile pcmconf8xx_t	*pcmp;
-	u_long reg;
-	uchar val;
-
-	debug ("hardware_disable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
-
-	immap = (immap_t *)CFG_IMMR;
-	pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
-
-	/* remove all power, put output in high impedance state */
-	val  = MAX1604_VCCBHIZ | MAX1604_VPPBHIZ;
-	i2c_init  (CFG_I2C_SPEED, CFG_I2C_SLAVE);
-	i2c_write (CFG_I2C_POWER_A_ADDR, 0, 0, &val, 1);
-
-	/* Configure PCMCIA General Control Register */
-	debug ("Disable PCMCIA buffers and assert RESET\n");
-	reg  = 0;
-	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
-	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
-	PCMCIA_PGCRX(_slot_) = reg;
-
-	/* Switch off PCMCIA port in PIC register 0x60 */
-	reg = pic_read  (0x60);
-	debug ("[%d] PIC read: reg_60 = 0x%02x\n", __LINE__, reg);
-	reg |=  0x10;
-	reg &= ~0x08;
-	pic_write (0x60, reg);
-#ifdef DEBUG
-	reg = pic_read  (0x60);
-	printf ("[%d] PIC read: reg_60 = 0x%02x\n", __LINE__, reg);
-#endif
-	udelay(10000);
-
-	return (0);
-}
-#endif	/* CFG_CMD_PCMCIA */
-
-
-static int voltage_set(int slot, int vcc, int vpp)
-{
-	volatile immap_t	*immap;
-	volatile pcmconf8xx_t	*pcmp;
-	u_long reg;
-	uchar val;
-
-	debug ("voltage_set: "
-		PCMCIA_BOARD_MSG
-		" Slot %c, Vcc=%d.%d, Vpp=%d.%d\n",
-		'A'+slot, vcc/10, vcc%10, vpp/10, vcc%10);
-
-	immap = (immap_t *)CFG_IMMR;
-	pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
-	/*
-	 * Disable PCMCIA buffers (isolate the interface)
-	 * and assert RESET signal
-	 */
-	debug ("Disable PCMCIA buffers and assert RESET\n");
-	reg  = PCMCIA_PGCRX(_slot_);
-	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
-	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
-	PCMCIA_PGCRX(_slot_) = reg;
-	udelay(500);
-
-	/*
-	 * Turn off all power (switch to high impedance)
-	 */
-	debug ("PCMCIA power OFF\n");
-	val  = MAX1604_VCCBHIZ | MAX1604_VPPBHIZ;
-	i2c_init  (CFG_I2C_SPEED, CFG_I2C_SLAVE);
-	i2c_write (CFG_I2C_POWER_A_ADDR, 0, 0, &val, 1);
-
-	val = 0;
-	switch(vcc) {
-	case  0: 			break;
-	case 33: val = MAX1604_VCC_35;	break;
-	case 50: 			break;
-	default: 			goto done;
-	}
-
-	/* Checking supported voltages */
-
-	debug ("PIPR: 0x%x --> %s\n",
-		pcmp->pcmc_pipr,
-		(pcmp->pcmc_pipr & 0x00008000) ? "only 5 V" : "can do 3.3V");
-
-	i2c_write (CFG_I2C_POWER_A_ADDR, 0, 0, &val, 1);
-	if (val) {
-		debug ("PCMCIA powered at %sV\n",
-			(val & MAX1604_VCC_35) ? "3.3" : "5.0");
-	} else {
-		debug ("PCMCIA powered down\n");
-	}
-
-done:
-	debug ("Enable PCMCIA buffers and stop RESET\n");
-	reg  =  PCMCIA_PGCRX(_slot_);
-	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
-	reg &= ~__MY_PCMCIA_GCRX_CXOE;		/* active low  */
-	PCMCIA_PGCRX(_slot_) = reg;
-	udelay(500);
-
-	debug ("voltage_set: " PCMCIA_BOARD_MSG " Slot %c, DONE\n",
-		slot+'A');
-	return (0);
-}
-
-#endif	/* LWMON */
-
-/* -------------------------------------------------------------------- */
-/* GTH board by Corelatus AB						*/
-/* -------------------------------------------------------------------- */
-#if defined(CONFIG_GTH)
-
-#define PCMCIA_BOARD_MSG "GTH COMPACT FLASH"
-
-static int voltage_set (int slot, int vcc, int vpp)
-{	/* Do nothing */
-	return 0;
-}
-
-static int hardware_enable (int slot)
-{
-	volatile immap_t *immap;
-	volatile cpm8xx_t *cp;
-	volatile pcmconf8xx_t *pcmp;
-	volatile sysconf8xx_t *sysp;
-	uint reg, mask;
-
-	debug ("hardware_enable: GTH Slot %c\n", 'A' + slot);
-
-	immap = (immap_t *) CFG_IMMR;
-	sysp = (sysconf8xx_t *) (&(((immap_t *) CFG_IMMR)->im_siu_conf));
-	pcmp = (pcmconf8xx_t *) (&(((immap_t *) CFG_IMMR)->im_pcmcia));
-	cp = (cpm8xx_t *) (&(((immap_t *) CFG_IMMR)->im_cpm));
-
-	/* clear interrupt state, and disable interrupts */
-	pcmp->pcmc_pscr = PCMCIA_MASK (_slot_);
-	pcmp->pcmc_per &= ~PCMCIA_MASK (_slot_);
-
-	/*
-	 * Disable interrupts, DMA, and PCMCIA buffers
-	 * (isolate the interface) and assert RESET signal
-	 */
-	debug ("Disable PCMCIA buffers and assert RESET\n");
-	reg = 0;
-	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
-	reg |= __MY_PCMCIA_GCRX_CXOE;	/* active low  */
-	PCMCIA_PGCRX (_slot_) = reg;
-	udelay (500);
-
-	/*
-	 * Make sure there is a card in the slot,
-	 * then configure the interface.
-	 */
-	udelay (10000);
-	debug ("[%d] %s: PIPR(%p)=0x%x\n",
-		__LINE__, __FUNCTION__,
-		&(pcmp->pcmc_pipr), pcmp->pcmc_pipr);
-	if (pcmp->pcmc_pipr & 0x98000000) {
-		printf ("   No Card found\n");
-		return (1);
-	}
-
-	mask = PCMCIA_VS1 (slot) | PCMCIA_VS2 (slot);
-	reg = pcmp->pcmc_pipr;
-	debug ("PIPR: 0x%x ==> VS1=o%s, VS2=o%s\n",
-		   reg,
-		   (reg & PCMCIA_VS1 (slot)) ? "n" : "ff",
-		   (reg & PCMCIA_VS2 (slot)) ? "n" : "ff");
-
-	debug ("Enable PCMCIA buffers and stop RESET\n");
-	reg  =  PCMCIA_PGCRX (_slot_);
-	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
-	reg &= ~__MY_PCMCIA_GCRX_CXOE;		/* active low  */
-	PCMCIA_PGCRX (_slot_) = reg;
-
-	udelay (250000);	/* some cards need >150 ms to come up :-( */
-
-	debug ("# hardware_enable done\n");
-
-	return 0;
-}
-#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
-static int hardware_disable(int slot)
-{
-	return 0;	/* No hardware to disable */
-}
-#endif	/* CFG_CMD_PCMCIA */
-#endif	/* CONFIG_GTH */
-
-/* -------------------------------------------------------------------- */
-/* ICU862 Boards by Cambridge Broadband Ltd.				*/
-/* -------------------------------------------------------------------- */
-
-#if defined(CONFIG_ICU862)
-
-#define PCMCIA_BOARD_MSG "ICU862"
-
-static void cfg_port_B (void);
-
-static int hardware_enable(int slot)
-{
-	volatile immap_t	*immap;
-	volatile cpm8xx_t	*cp;
-	volatile pcmconf8xx_t	*pcmp;
-	volatile sysconf8xx_t	*sysp;
-	uint reg, pipr, mask;
-	int i;
-
-	debug ("hardware_enable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
-
-	udelay(10000);
-
-	immap = (immap_t *)CFG_IMMR;
-	sysp  = (sysconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_siu_conf));
-	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
-	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
-
-	/* Configure Port B for TPS2205 PC-Card Power-Interface Switch */
-	cfg_port_B ();
-
-	/*
-	 * Configure SIUMCR to enable PCMCIA port B
-	 * (VFLS[0:1] are not used for debugging, we connect FRZ# instead)
-	 */
-	sysp->sc_siumcr &= ~SIUMCR_DBGC11;	/* set DBGC to 00 */
-
-	/* clear interrupt state, and disable interrupts */
-	pcmp->pcmc_pscr =  PCMCIA_MASK(_slot_);
-	pcmp->pcmc_per &= ~PCMCIA_MASK(_slot_);
-
-	/*
-	 * Disable interrupts, DMA, and PCMCIA buffers
-	 * (isolate the interface) and assert RESET signal
-	 */
-	debug ("Disable PCMCIA buffers and assert RESET\n");
-	reg  = 0;
-	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
-	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
-	PCMCIA_PGCRX(_slot_) = reg;
-	udelay(500);
-
-	/*
-	 * Make sure there is a card in the slot, then configure the interface.
-	 */
-	udelay(10000);
-	debug ("[%d] %s: PIPR(%p)=0x%x\n",
-		__LINE__,__FUNCTION__,
-		&(pcmp->pcmc_pipr),pcmp->pcmc_pipr);
-	if (pcmp->pcmc_pipr & (0x18000000 >> (slot << 4))) {
-		printf ("   No Card found\n");
-		return (1);
-	}
-
-	/*
-	 * Power On: Set VAVCC to 3.3V or 5V, set VAVPP to Hi-Z
-	 */
-	mask = PCMCIA_VS1(slot) | PCMCIA_VS2(slot);
-	pipr = pcmp->pcmc_pipr;
-	debug ("PIPR: 0x%x ==> VS1=o%s, VS2=o%s\n",
-		pipr,
-		(reg&PCMCIA_VS1(slot))?"n":"ff",
-		(reg&PCMCIA_VS2(slot))?"n":"ff");
-
-	reg  = cp->cp_pbdat;
-	if ((pipr & mask) == mask) {
-		reg |= (TPS2205_VPP_PGM | TPS2205_VPP_VCC |	/* VAVPP => Hi-Z */
-			TPS2205_VCC3);				/* 3V off	*/
-		reg &= ~(TPS2205_VCC5);				/* 5V on	*/
-		puts (" 5.0V card found: ");
-	} else {
-		reg |= (TPS2205_VPP_PGM | TPS2205_VPP_VCC |	/* VAVPP => Hi-Z */
-			TPS2205_VCC5);				/* 5V off	*/
-		reg &= ~(TPS2205_VCC3);				/* 3V on	*/
-		puts (" 3.3V card found: ");
-	}
-
-	debug ("\nPB DAT: %08x -> 3.3V %s 5.0V %s VPP_PGM %s VPP_VCC %s\n",
-		reg,
-		(reg & TPS2205_VCC3)    ? "off" : "on",
-		(reg & TPS2205_VCC5)    ? "off" : "on",
-		(reg & TPS2205_VPP_PGM) ? "off" : "on",
-		(reg & TPS2205_VPP_VCC) ? "off" : "on" );
-
-	cp->cp_pbdat = reg;
-
-	/*  Wait 500 ms; use this to check for over-current */
-	for (i=0; i<5000; ++i) {
-		if ((cp->cp_pbdat & TPS2205_OC) == 0) {
-			printf ("   *** Overcurrent - Safety shutdown ***\n");
-			cp->cp_pbdat &= ~(TPS2205_SHDN);
-			return (1);
-		}
-		udelay (100);
-	}
-
-	debug ("Enable PCMCIA buffers and stop RESET\n");
-	reg  =  PCMCIA_PGCRX(_slot_);
-	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
-	reg &= ~__MY_PCMCIA_GCRX_CXOE;		/* active low  */
-	PCMCIA_PGCRX(_slot_) = reg;
-
-	udelay(250000);	/* some cards need >150 ms to come up :-( */
-
-	debug ("# hardware_enable done\n");
-
-	return (0);
-}
-
-
-#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
-static int hardware_disable(int slot)
-{
-	volatile immap_t	*immap;
-	volatile cpm8xx_t	*cp;
-	volatile pcmconf8xx_t	*pcmp;
-	u_long reg;
-
-	debug ("hardware_disable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
-
-	immap = (immap_t *)CFG_IMMR;
-	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
-	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
-
-	/* Shut down */
-	cp->cp_pbdat &= ~(TPS2205_SHDN);
-
-	/* Configure PCMCIA General Control Register */
-	debug ("Disable PCMCIA buffers and assert RESET\n");
-	reg  = 0;
-	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
-	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
-	PCMCIA_PGCRX(_slot_) = reg;
-
-	udelay(10000);
-
-	return (0);
-}
-#endif	/* CFG_CMD_PCMCIA */
-
-
-static int voltage_set(int slot, int vcc, int vpp)
-{
-	volatile immap_t	*immap;
-	volatile cpm8xx_t	*cp;
-	volatile pcmconf8xx_t	*pcmp;
-	u_long reg;
-
-	debug ("voltage_set: "
-		PCMCIA_BOARD_MSG
-		" Slot %c, Vcc=%d.%d, Vpp=%d.%d\n",
-		'A'+slot, vcc/10, vcc%10, vpp/10, vcc%10);
-
-	immap = (immap_t *)CFG_IMMR;
-	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
-	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
-	/*
-	 * Disable PCMCIA buffers (isolate the interface)
-	 * and assert RESET signal
-	 */
-	debug ("Disable PCMCIA buffers and assert RESET\n");
-	reg  = PCMCIA_PGCRX(_slot_);
-	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
-	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
-	PCMCIA_PGCRX(_slot_) = reg;
-	udelay(500);
-
-	/*
-	 * Configure Port C pins for
-	 * 5 Volts Enable and 3 Volts enable,
-	 * Turn all power pins to Hi-Z
-	 */
-	debug ("PCMCIA power OFF\n");
-	cfg_port_B ();	/* Enables switch, but all in Hi-Z */
-
-	reg  = cp->cp_pbdat;
-
-	switch(vcc) {
-	case  0: 			break;	/* Switch off		*/
-	case 33: reg &= ~TPS2205_VCC3;	break;	/* Switch on 3.3V	*/
-	case 50: reg &= ~TPS2205_VCC5;	break;	/* Switch on 5.0V	*/
-	default: 			goto done;
-	}
-
-	/* Checking supported voltages */
-
-	debug ("PIPR: 0x%x --> %s\n",
-		pcmp->pcmc_pipr,
-		(pcmp->pcmc_pipr & 0x00008000) ? "only 5 V" : "can do 3.3V");
-
-	cp->cp_pbdat = reg;
-
-#ifdef DEBUG
-    {
-	char *s;
-
-	if ((reg & TPS2205_VCC3) == 0) {
-		s = "at 3.3V";
-	} else if ((reg & TPS2205_VCC5) == 0) {
-		s = "at 5.0V";
-	} else {
-		s = "down";
-	}
-	printf ("PCMCIA powered %s\n", s);
-    }
-#endif
-
-done:
-	debug ("Enable PCMCIA buffers and stop RESET\n");
-	reg  =  PCMCIA_PGCRX(_slot_);
-	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
-	reg &= ~__MY_PCMCIA_GCRX_CXOE;		/* active low  */
-	PCMCIA_PGCRX(_slot_) = reg;
-	udelay(500);
-
-	debug ("voltage_set: " PCMCIA_BOARD_MSG " Slot %c, DONE\n",
-		slot+'A');
-	return (0);
-}
-
-static void cfg_port_B (void)
-{
-	volatile immap_t	*immap;
-	volatile cpm8xx_t	*cp;
-	uint reg;
-
-	immap = (immap_t *)CFG_IMMR;
-	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
-
-	/*
-	 * Configure Port B for TPS2205 PC-Card Power-Interface Switch
-	 *
-	 * Switch off all voltages, assert shutdown
-	 */
-	reg  = cp->cp_pbdat;
-	reg |= (TPS2205_VPP_PGM | TPS2205_VPP_VCC |	/* VAVPP => Hi-Z */
-		TPS2205_VCC3    | TPS2205_VCC5    |	/* VAVCC => Hi-Z */
-		TPS2205_SHDN);				/* enable switch */
-	cp->cp_pbdat = reg;
-
-	cp->cp_pbpar &= ~(TPS2205_INPUTS | TPS2205_OUTPUTS);
-
-	reg = cp->cp_pbdir & ~(TPS2205_INPUTS);
-	cp->cp_pbdir = reg | TPS2205_OUTPUTS;
-
-	debug ("Set Port B: PAR: %08x DIR: %08x DAT: %08x\n",
-		cp->cp_pbpar, cp->cp_pbdir, cp->cp_pbdat);
-}
-
-#endif	/* ICU862 */
-
-
-/* -------------------------------------------------------------------- */
-/* C2MON Boards by TTTech Computertechnik AG				*/
-/* -------------------------------------------------------------------- */
-
-#if defined(CONFIG_C2MON)
-
-#define PCMCIA_BOARD_MSG "C2MON"
-
-static void cfg_ports (void);
-
-static int hardware_enable(int slot)
-{
-	volatile immap_t	*immap;
-	volatile cpm8xx_t	*cp;
-	volatile pcmconf8xx_t	*pcmp;
-	volatile sysconf8xx_t	*sysp;
-	uint reg, pipr, mask;
-	ushort sreg;
-	int i;
-
-	debug ("hardware_enable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
-
-	udelay(10000);
-
-	immap = (immap_t *)CFG_IMMR;
-	sysp  = (sysconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_siu_conf));
-	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
-	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
-
-	/* Configure Ports for TPS2211A PC-Card Power-Interface Switch */
-	cfg_ports ();
-
-	/*
-	 * Configure SIUMCR to enable PCMCIA port B
-	 * (VFLS[0:1] are not used for debugging, we connect FRZ# instead)
-	 */
-	sysp->sc_siumcr &= ~SIUMCR_DBGC11;	/* set DBGC to 00 */
-
-	/* clear interrupt state, and disable interrupts */
-	pcmp->pcmc_pscr =  PCMCIA_MASK(_slot_);
-	pcmp->pcmc_per &= ~PCMCIA_MASK(_slot_);
-
-	/*
-	 * Disable interrupts, DMA, and PCMCIA buffers
-	 * (isolate the interface) and assert RESET signal
-	 */
-	debug ("Disable PCMCIA buffers and assert RESET\n");
-	reg  = 0;
-	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
-	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
-	PCMCIA_PGCRX(_slot_) = reg;
-	udelay(500);
-
-	/*
-	 * Make sure there is a card in the slot, then configure the interface.
-	 */
-	udelay(10000);
-	debug ("[%d] %s: PIPR(%p)=0x%x\n",
-		__LINE__,__FUNCTION__,
-		&(pcmp->pcmc_pipr),pcmp->pcmc_pipr);
-	if (pcmp->pcmc_pipr & (0x18000000 >> (slot << 4))) {
-		printf ("   No Card found\n");
-		return (1);
-	}
-
-	/*
-	 * Power On: Set VAVCC to 3.3V or 5V, set VAVPP to Hi-Z
-	 */
-	mask = PCMCIA_VS1(slot) | PCMCIA_VS2(slot);
-	pipr = pcmp->pcmc_pipr;
-	debug ("PIPR: 0x%x ==> VS1=o%s, VS2=o%s\n",
-		pipr,
-		(reg&PCMCIA_VS1(slot))?"n":"ff",
-		(reg&PCMCIA_VS2(slot))?"n":"ff");
-
-	sreg = immap->im_ioport.iop_pcdat;
-	if ((pipr & mask) == mask) {
-		sreg |=  (TPS2211_VPPD0 | TPS2211_VPPD1 |	/* VAVPP => Hi-Z */
-			  TPS2211_VCCD1);			/* 5V on	*/
-		sreg &= ~(TPS2211_VCCD0);			/* 3V off	*/
-		puts (" 5.0V card found: ");
-	} else {
-		sreg |=  (TPS2211_VPPD0 | TPS2211_VPPD1 |	/* VAVPP => Hi-Z */
-			  TPS2211_VCCD0);			/* 3V on	*/
-		sreg &= ~(TPS2211_VCCD1);			/* 5V off	*/
-		puts (" 3.3V card found: ");
-	}
-
-	debug ("\nPC DAT: %04x -> 3.3V %s 5.0V %s\n",
-		sreg,
-		( (sreg & TPS2211_VCCD0) && !(sreg & TPS2211_VCCD1)) ? "on" : "off",
-		(!(sreg & TPS2211_VCCD0) &&  (sreg & TPS2211_VCCD1)) ? "on" : "off"
-	);
-
-	immap->im_ioport.iop_pcdat = sreg;
-
-	/*  Wait 500 ms; use this to check for over-current */
-	for (i=0; i<5000; ++i) {
-		if ((cp->cp_pbdat & TPS2211_OC) == 0) {
-		    printf ("   *** Overcurrent - Safety shutdown ***\n");
-		    immap->im_ioport.iop_pcdat &= ~(TPS2211_VCCD0|TPS2211_VCCD1);
-		    return (1);
-		}
-		udelay (100);
-	}
-
-	debug ("Enable PCMCIA buffers and stop RESET\n");
-	reg  =  PCMCIA_PGCRX(_slot_);
-	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
-	reg &= ~__MY_PCMCIA_GCRX_CXOE;		/* active low  */
-	PCMCIA_PGCRX(_slot_) = reg;
-
-	udelay(250000);	/* some cards need >150 ms to come up :-( */
-
-	debug ("# hardware_enable done\n");
-
-	return (0);
-}
-
-
-#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
-static int hardware_disable(int slot)
-{
-	volatile immap_t	*immap;
-	volatile cpm8xx_t	*cp;
-	volatile pcmconf8xx_t	*pcmp;
-	u_long reg;
-
-	debug ("hardware_disable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
-
-	immap = (immap_t *)CFG_IMMR;
-	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
-
-	/* Configure PCMCIA General Control Register */
-	debug ("Disable PCMCIA buffers and assert RESET\n");
-	reg  = 0;
-	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
-	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
-	PCMCIA_PGCRX(_slot_) = reg;
-
-	/* ALl voltages off / Hi-Z */
-	immap->im_ioport.iop_pcdat |= (TPS2211_VPPD0 | TPS2211_VPPD1 |
-				       TPS2211_VCCD0 | TPS2211_VCCD1 );
-
-	udelay(10000);
-
-	return (0);
-}
-#endif	/* CFG_CMD_PCMCIA */
-
-
-static int voltage_set(int slot, int vcc, int vpp)
-{
-	volatile immap_t	*immap;
-	volatile cpm8xx_t	*cp;
-	volatile pcmconf8xx_t	*pcmp;
-	u_long reg;
-	ushort sreg;
-
-	debug ("voltage_set: "
-		PCMCIA_BOARD_MSG
-		" Slot %c, Vcc=%d.%d, Vpp=%d.%d\n",
-		'A'+slot, vcc/10, vcc%10, vpp/10, vcc%10);
-
-	immap = (immap_t *)CFG_IMMR;
-	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
-	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
-	/*
-	 * Disable PCMCIA buffers (isolate the interface)
-	 * and assert RESET signal
-	 */
-	debug ("Disable PCMCIA buffers and assert RESET\n");
-	reg  = PCMCIA_PGCRX(_slot_);
-	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
-	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
-	PCMCIA_PGCRX(_slot_) = reg;
-	udelay(500);
-
-	/*
-	 * Configure Port C pins for
-	 * 5 Volts Enable and 3 Volts enable,
-	 * Turn all power pins to Hi-Z
-	 */
-	debug ("PCMCIA power OFF\n");
-	cfg_ports ();	/* Enables switch, but all in Hi-Z */
-
-	sreg  = immap->im_ioport.iop_pcdat;
-	sreg |= TPS2211_VPPD0 | TPS2211_VPPD1;		/* VAVPP always Hi-Z */
-
-	switch(vcc) {
-	case  0: 			break;	/* Switch off		*/
-	case 33: sreg |=  TPS2211_VCCD0;	/* Switch on 3.3V	*/
-		 sreg &= ~TPS2211_VCCD1;
-		 			break;
-	case 50: sreg &= ~TPS2211_VCCD0;	/* Switch on 5.0V	*/
-		 sreg |=  TPS2211_VCCD1;
-		 			break;
-	default: 			goto done;
-	}
-
-	/* Checking supported voltages */
-
-	debug ("PIPR: 0x%x --> %s\n",
-		pcmp->pcmc_pipr,
-		(pcmp->pcmc_pipr & 0x00008000) ? "only 5 V" : "can do 3.3V");
-
-	immap->im_ioport.iop_pcdat = sreg;
-
-#ifdef DEBUG
-    {
-	char *s;
-
-	if ((sreg & TPS2211_VCCD0) && !(sreg & TPS2211_VCCD1)) {
-		s = "at 3.3V";
-	} else if (!(sreg & TPS2211_VCCD0) &&  (sreg & TPS2211_VCCD1)) {
-		s = "at 5.0V";
-	} else {
-		s = "down";
-	}
-	printf ("PCMCIA powered %s\n", s);
-    }
-#endif
-
-done:
-	debug ("Enable PCMCIA buffers and stop RESET\n");
-	reg  =  PCMCIA_PGCRX(_slot_);
-	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
-	reg &= ~__MY_PCMCIA_GCRX_CXOE;		/* active low  */
-	PCMCIA_PGCRX(_slot_) = reg;
-	udelay(500);
-
-	debug ("voltage_set: " PCMCIA_BOARD_MSG " Slot %c, DONE\n",
-		slot+'A');
-	return (0);
-}
-
-static void cfg_ports (void)
-{
-	volatile immap_t	*immap;
-	volatile cpm8xx_t	*cp;
-	ushort sreg;
-
-	immap = (immap_t *)CFG_IMMR;
-	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
-
-	/*
-	 * Configure Port C for TPS2211 PC-Card Power-Interface Switch
-	 *
-	 * Switch off all voltages, assert shutdown
-	 */
-	sreg = immap->im_ioport.iop_pcdat;
-	sreg |=  (TPS2211_VPPD0 | TPS2211_VPPD1);	/* VAVPP => Hi-Z */
-	sreg &= ~(TPS2211_VCCD0 | TPS2211_VCCD1);	/* 3V and 5V off */
-	immap->im_ioport.iop_pcdat = sreg;
-
-	immap->im_ioport.iop_pcpar &= ~(TPS2211_OUTPUTS);
-	immap->im_ioport.iop_pcdir |=   TPS2211_OUTPUTS;
-
-	debug ("Set Port C: PAR:     %04x DIR:     %04x DAT:     %04x\n",
-		immap->im_ioport.iop_pcpar,
-		immap->im_ioport.iop_pcdir,
-		immap->im_ioport.iop_pcdat);
-
-	/*
-	 * Configure Port B for TPS2211 PC-Card Power-Interface Switch
-	 *
-	 * Over-Current Input only
-	 */
-	cp->cp_pbpar &= ~(TPS2211_INPUTS);
-	cp->cp_pbdir &= ~(TPS2211_INPUTS);
-
-	debug ("Set Port B: PAR: %08x DIR: %08x DAT: %08x\n",
-		cp->cp_pbpar, cp->cp_pbdir, cp->cp_pbdat);
-}
-
-#endif	/* C2MON */
-
-/* -------------------------------------------------------------------- */
-/* MBX board from Morotola						*/
-/* -------------------------------------------------------------------- */
-
-#if defined( CONFIG_MBX )
-#include <../board/mbx8xx/csr.h>
-
-/* A lot of this has been taken from the RPX code in this file it works from me.
-   I have added the voltage selection for the MBX board. */
-
-/* MBX voltage bit in control register #2 */
-#define CR2_VPP12       ((uchar)0x10)
-#define CR2_VPPVDD      ((uchar)0x20)
-#define CR2_VDD5        ((uchar)0x40)
-#define CR2_VDD3        ((uchar)0x80)
-
-#define PCMCIA_BOARD_MSG "MBX860"
-
-static int voltage_set (int slot, int vcc, int vpp)
-{
-	uchar reg = 0;
-
-	debug ("voltage_set: PCMCIA_BOARD_MSG Slot %c, Vcc=%d.%d, Vpp=%d.%d\n",
-		 'A' + slot, vcc / 10, vcc % 10, vpp / 10, vcc % 10);
-
-	switch (vcc) {
-	case 0:
-		break;
-	case 33:
-		reg |= CR2_VDD3;
-		break;
-	case 50:
-		reg |= CR2_VDD5;
-		break;
-	default:
-		return 1;
-	}
-
-	switch (vpp) {
-	case 0:
-		break;
-	case 33:
-	case 50:
-		if (vcc == vpp) {
-			reg |= CR2_VPPVDD;
-		} else {
-			return 1;
-		}
-		break;
-	case 120:
-		reg |= CR2_VPP12;
-		break;
-	default:
-		return 1;
-	}
-
-	/* first, turn off all power */
-	MBX_CSR2 &= ~(CR2_VDDSEL | CR2_VPPSEL);
-
-	/* enable new powersettings */
-	MBX_CSR2 |= reg;
-	debug ("MBX_CSR2 read = 0x%02x\n", MBX_CSR2);
-
-	return (0);
-}
-
-static int hardware_enable (int slot)
-{
-	volatile immap_t *immap;
-	volatile cpm8xx_t *cp;
-	volatile pcmconf8xx_t *pcmp;
-	volatile sysconf8xx_t *sysp;
-	uint reg, mask;
-
-	debug ("hardware_enable: " PCMCIA_BOARD_MSG " Slot %c\n",
-				  'A' + slot);
-
-	udelay (10000);
-
-	immap = (immap_t *) CFG_IMMR;
-	sysp = (sysconf8xx_t *) (&(((immap_t *) CFG_IMMR)->im_siu_conf));
-	pcmp = (pcmconf8xx_t *) (&(((immap_t *) CFG_IMMR)->im_pcmcia));
-	cp = (cpm8xx_t *) (&(((immap_t *) CFG_IMMR)->im_cpm));
-
-	/* clear interrupt state, and disable interrupts */
-	pcmp->pcmc_pscr = PCMCIA_MASK (_slot_);
-	pcmp->pcmc_per &= ~PCMCIA_MASK (_slot_);
-
-	/*
-	 * Disable interrupts, DMA, and PCMCIA buffers
-	 * (isolate the interface) and assert RESET signal
-	 */
-	debug ("Disable PCMCIA buffers and assert RESET\n");
-	reg = 0;
-	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
-	reg |= __MY_PCMCIA_GCRX_CXOE;	/* active low  */
-	PCMCIA_PGCRX (_slot_) = reg;
-	udelay (500);
-
-	/* remove all power */
-	voltage_set (slot, 0, 0);
-	/*
-	 * Make sure there is a card in the slot, then configure the interface.
-	 */
-	udelay(10000);
-	debug ("[%d] %s: PIPR(%p)=0x%x\n",
-		__LINE__,__FUNCTION__,
-		&(pcmp->pcmc_pipr),pcmp->pcmc_pipr);
-#ifndef CONFIG_HMI10
-	if (pcmp->pcmc_pipr & (0x18000000 >> (slot << 4))) {
-#else
-	if (pcmp->pcmc_pipr & (0x10000000 >> (slot << 4))) {
-#endif	/* CONFIG_HMI10 */
-		printf ("   No Card found\n");
-		return (1);
-	}
-
-	/*
-	 * Power On.
-	 */
-	mask = PCMCIA_VS1 (_slot_) | PCMCIA_VS2 (_slot_);
-	reg = pcmp->pcmc_pipr;
-	debug ("PIPR: 0x%x ==> VS1=o%s, VS2=o%s\n", reg,
-		  (reg & PCMCIA_VS1 (slot)) ? "n" : "ff",
-		  (reg & PCMCIA_VS2 (slot)) ? "n" : "ff");
-
-	if ((reg & mask) == mask) {
-		voltage_set (_slot_, 50, 0);
-		printf (" 5.0V card found: ");
-	} else {
-		voltage_set (_slot_, 33, 0);
-		printf (" 3.3V card found: ");
-	}
-
-	debug ("Enable PCMCIA buffers and stop RESET\n");
-	reg = PCMCIA_PGCRX (_slot_);
-	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
-	reg &= ~__MY_PCMCIA_GCRX_CXOE;	/* active low  */
-	PCMCIA_PGCRX (_slot_) = reg;
-
-	udelay (250000);	/* some cards need >150 ms to come up :-( */
-
-	debug ("# hardware_enable done\n");
-
-	return (0);
-}
-
-#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
-static int hardware_disable (int slot)
-{
-	return 0;	/* No hardware to disable */
-}
-#endif /* CFG_CMD_PCMCIA */
-#endif /* CONFIG_MBX */
-/* -------------------------------------------------------------------- */
-/* R360MPI Board							*/
-/* -------------------------------------------------------------------- */
-
-#if defined(CONFIG_R360MPI)
-
-#define PCMCIA_BOARD_MSG "R360MPI"
-
-
-static int hardware_enable(int slot)
-{
-	volatile immap_t	*immap;
-	volatile cpm8xx_t	*cp;
-	volatile pcmconf8xx_t	*pcmp;
-	volatile sysconf8xx_t	*sysp;
-	uint reg, mask;
-
-	debug ("hardware_enable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
-
-	udelay(10000);
-
-	immap = (immap_t *)CFG_IMMR;
-	sysp  = (sysconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_siu_conf));
-	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
-	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
-
-	/*
-	 * Configure SIUMCR to enable PCMCIA port B
-	 * (VFLS[0:1] are not used for debugging, we connect FRZ# instead)
-	 */
-	sysp->sc_siumcr &= ~SIUMCR_DBGC11;	/* set DBGC to 00 */
-
-	/* clear interrupt state, and disable interrupts */
-	pcmp->pcmc_pscr =  PCMCIA_MASK(_slot_);
-	pcmp->pcmc_per &= ~PCMCIA_MASK(_slot_);
-
-	/*
-	 * Disable interrupts, DMA, and PCMCIA buffers
-	 * (isolate the interface) and assert RESET signal
-	 */
-	debug ("Disable PCMCIA buffers and assert RESET\n");
-	reg  = 0;
-	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
-	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
-	PCMCIA_PGCRX(_slot_) = reg;
-	udelay(500);
-
-	/*
-	 * Configure Ports A, B & C pins for
-	 * 5 Volts Enable and 3 Volts enable
-	 */
-	immap->im_ioport.iop_pcpar &= ~(0x0400);
-	immap->im_ioport.iop_pcso  &= ~(0x0400);/*
-	immap->im_ioport.iop_pcdir |= 0x0400;*/
-
-	immap->im_ioport.iop_papar &= ~(0x0200);/*
-	immap->im_ioport.iop_padir |= 0x0200;*/
-#if 0
-	immap->im_ioport.iop_pbpar &= ~(0xC000);
-	immap->im_ioport.iop_pbdir &= ~(0xC000);
-#endif
-	/* remove all power */
-
-	immap->im_ioport.iop_pcdat |= 0x0400;
-	immap->im_ioport.iop_padat |= 0x0200;
-
-	/*
-	 * Make sure there is a card in the slot, then configure the interface.
-	 */
-	udelay(10000);
-	debug ("[%d] %s: PIPR(%p)=0x%x\n",
-		__LINE__,__FUNCTION__,
-		&(pcmp->pcmc_pipr),pcmp->pcmc_pipr);
-	if (pcmp->pcmc_pipr & (0x18000000 >> (slot << 4))) {
-		printf ("   No Card found\n");
-		return (1);
-	}
-
-	/*
-	 * Power On.
-	 */
-	mask = PCMCIA_VS1(slot) | PCMCIA_VS2(slot);
-	reg  = pcmp->pcmc_pipr;
-	debug ("PIPR: 0x%x ==> VS1=o%s, VS2=o%s\n",
-		reg,
-		(reg&PCMCIA_VS1(slot))?"n":"ff",
-		(reg&PCMCIA_VS2(slot))?"n":"ff");
-	if ((reg & mask) == mask) {
-		immap->im_ioport.iop_pcdat &= ~(0x4000);
-		puts (" 5.0V card found: ");
-	} else {
-		immap->im_ioport.iop_padat &= ~(0x0002);
-		puts (" 3.3V card found: ");
-	}
-	immap->im_ioport.iop_pcdir |= 0x0400;
-	immap->im_ioport.iop_padir |= 0x0200;
-#if 0
-	/*  VCC switch error flag, PCMCIA slot INPACK_ pin */
-	cp->cp_pbdir &= ~(0x0020 | 0x0010);
-	cp->cp_pbpar &= ~(0x0020 | 0x0010);
-	udelay(500000);
-#endif
-	debug ("Enable PCMCIA buffers and stop RESET\n");
-	reg  =  PCMCIA_PGCRX(_slot_);
-	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
-	reg &= ~__MY_PCMCIA_GCRX_CXOE;		/* active low  */
-	PCMCIA_PGCRX(_slot_) = reg;
-
-	udelay(250000);	/* some cards need >150 ms to come up :-( */
-
-	debug ("# hardware_enable done\n");
-
-	return (0);
-}
-
-
-#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
-static int hardware_disable(int slot)
-{
-	volatile immap_t	*immap;
-	volatile pcmconf8xx_t	*pcmp;
-	u_long reg;
-
-	debug ("hardware_disable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
-
-	immap = (immap_t *)CFG_IMMR;
-	pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
-
-	/* remove all power */
-	immap->im_ioport.iop_pcdat |= 0x0400;
-	immap->im_ioport.iop_padat |= 0x0200;
-
-	/* Configure PCMCIA General Control Register */
-	debug ("Disable PCMCIA buffers and assert RESET\n");
-	reg  = 0;
-	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
-	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
-	PCMCIA_PGCRX(_slot_) = reg;
-
-	udelay(10000);
-
-	return (0);
-}
-#endif	/* CFG_CMD_PCMCIA */
-
-
-static int voltage_set(int slot, int vcc, int vpp)
-{
-	volatile immap_t	*immap;
-	volatile pcmconf8xx_t	*pcmp;
-	u_long reg;
-
-	debug ("voltage_set: "
-		PCMCIA_BOARD_MSG
-		" Slot %c, Vcc=%d.%d, Vpp=%d.%d\n",
-		'A'+slot, vcc/10, vcc%10, vpp/10, vcc%10);
-
-	immap = (immap_t *)CFG_IMMR;
-	pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
-	/*
-	 * Disable PCMCIA buffers (isolate the interface)
-	 * and assert RESET signal
-	 */
-	debug ("Disable PCMCIA buffers and assert RESET\n");
-	reg  = PCMCIA_PGCRX(_slot_);
-	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
-	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
-	PCMCIA_PGCRX(_slot_) = reg;
-	udelay(500);
-
-	/*
-	 * Configure Ports A & C pins for
-	 * 5 Volts Enable and 3 Volts enable,
-	 * Turn off all power
-	 */
-	debug ("PCMCIA power OFF\n");
-	immap->im_ioport.iop_pcpar &= ~(0x0400);
-	immap->im_ioport.iop_pcso  &= ~(0x0400);/*
-	immap->im_ioport.iop_pcdir |= 0x0400;*/
-
-	immap->im_ioport.iop_papar &= ~(0x0200);/*
-	immap->im_ioport.iop_padir |= 0x0200;*/
-
-	immap->im_ioport.iop_pcdat |= 0x0400;
-	immap->im_ioport.iop_padat |= 0x0200;
-
-	reg = 0;
-	switch(vcc) {
-	case  0: 		break;
-	case 33: reg |= 0x0200;	break;
-	case 50: reg |= 0x0400;	break;
-	default: 		goto done;
-	}
-
-	/* Checking supported voltages */
-
-	debug ("PIPR: 0x%x --> %s\n",
-		pcmp->pcmc_pipr,
-		(pcmp->pcmc_pipr & 0x00008000) ? "only 5 V" : "can do 3.3V");
-
-	if (reg & 0x0200)
-		immap->im_ioport.iop_pcdat &= !reg;
-	if (reg & 0x0400)
-		immap->im_ioport.iop_padat &= !reg;
-	immap->im_ioport.iop_pcdir |= 0x0200;
-	immap->im_ioport.iop_padir |= 0x0400;
-	if (reg) {
-		debug ("PCMCIA powered at %sV\n",
-			(reg&0x0400) ? "5.0" : "3.3");
-	} else {
-		debug ("PCMCIA powered down\n");
-	}
-
-done:
-	debug ("Enable PCMCIA buffers and stop RESET\n");
-	reg  =  PCMCIA_PGCRX(_slot_);
-	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
-	reg &= ~__MY_PCMCIA_GCRX_CXOE;		/* active low  */
-	PCMCIA_PGCRX(_slot_) = reg;
-	udelay(500);
-
-	debug ("voltage_set: " PCMCIA_BOARD_MSG " Slot %c, DONE\n",
-		slot+'A');
-	return (0);
-}
-
-#endif	/* R360MPI */
-
-/* -------------------------------------------------------------------- */
-/* KUP4K and KUP4X Boards								*/
-/* -------------------------------------------------------------------- */
-#if defined(CONFIG_KUP4K) || defined(CONFIG_KUP4X)
-
-#define PCMCIA_BOARD_MSG "KUP"
-
-#define KUP4K_PCMCIA_B_3V3 (0x00020000)
-
-static int hardware_enable(int slot)
-{
-	volatile immap_t	*immap;
-	volatile cpm8xx_t	*cp;
-	volatile pcmconf8xx_t	*pcmp;
-	volatile sysconf8xx_t	*sysp;
-	uint reg, mask;
-
-	debug ("hardware_enable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
-
-	udelay(10000);
-
-	immap = (immap_t *)CFG_IMMR;
-	sysp  = (sysconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_siu_conf));
-	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
-	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
-
-	/*
-	 * Configure SIUMCR to enable PCMCIA port B
-	 * (VFLS[0:1] are not used for debugging, we connect FRZ# instead)
-	 */
-	sysp->sc_siumcr &= ~SIUMCR_DBGC11;	/* set DBGC to 00 */
-
-	/* clear interrupt state, and disable interrupts */
-	pcmp->pcmc_pscr =  PCMCIA_MASK(slot);
-	pcmp->pcmc_per &= ~PCMCIA_MASK(slot);
-
-	/*
-	 * Disable interrupts, DMA, and PCMCIA buffers
-	 * (isolate the interface) and assert RESET signal
-	 */
-	debug ("Disable PCMCIA buffers and assert RESET\n");
-	reg  = 0;
-	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
-	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
-	PCMCIA_PGCRX(slot) = reg;
-	udelay(2500);
-
-	/*
-	 * Configure Port B pins for
-	 * 3 Volts enable
-	 */
-	if (slot) { /* Slot A is built-in */
-		cp->cp_pbdir |=  KUP4K_PCMCIA_B_3V3;
-		cp->cp_pbpar &= ~KUP4K_PCMCIA_B_3V3;
-		/* remove all power */
-		cp->cp_pbdat |=  KUP4K_PCMCIA_B_3V3; /* active low */
-	}
-	/*
-	 * Make sure there is a card in the slot, then configure the interface.
-	 */
-	udelay(10000);
-	debug ("[%d] %s: PIPR(%p)=0x%x\n",
-		__LINE__,__FUNCTION__,
-		&(pcmp->pcmc_pipr),pcmp->pcmc_pipr);
-	if (pcmp->pcmc_pipr & (0x18000000 >> (slot << 4))) {
-		printf ("   No Card found\n");
-		return (1);
-	}
-
-	/*
-	 * Power On.
-	 */
-	printf("%s  Slot %c:", slot ? "" : "\n", 'A' + slot);
-	mask = PCMCIA_VS1(slot) | PCMCIA_VS2(slot);
-	reg  = pcmp->pcmc_pipr;
-	debug ("PIPR: 0x%x ==> VS1=o%s, VS2=o%s\n",
-		reg,
-		(reg&PCMCIA_VS1(slot))?"n":"ff",
-		(reg&PCMCIA_VS2(slot))?"n":"ff");
-	if ((reg & mask) == mask) {
-		puts (" 5.0V card found: NOT SUPPORTED !!!\n");
-	} else {
-		if(slot)
-			cp->cp_pbdat &= ~KUP4K_PCMCIA_B_3V3;
-		puts (" 3.3V card found: ");
-	}
-#if 0
-	/*  VCC switch error flag, PCMCIA slot INPACK_ pin */
-	cp->cp_pbdir &= ~(0x0020 | 0x0010);
-	cp->cp_pbpar &= ~(0x0020 | 0x0010);
-	udelay(500000);
-#endif
-	debug ("Enable PCMCIA buffers and stop RESET\n");
-	reg  =  PCMCIA_PGCRX(slot);
-	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
-	reg &= ~__MY_PCMCIA_GCRX_CXOE;		/* active low  */
-	PCMCIA_PGCRX(slot) = reg;
-
-	udelay(250000);	/* some cards need >150 ms to come up :-( */
-
-	debug ("# hardware_enable done\n");
-
-	return (0);
-}
-
-
-#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
-static int hardware_disable(int slot)
-{
-	volatile immap_t	*immap;
-	volatile cpm8xx_t	*cp;
-	volatile pcmconf8xx_t	*pcmp;
-	u_long reg;
-
-	debug ("hardware_disable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
-
-	immap = (immap_t *)CFG_IMMR;
-	pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
-	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
-
-	/* remove all power */
-	if (slot)
-		cp->cp_pbdat |= KUP4K_PCMCIA_B_3V3;
-
-	/* Configure PCMCIA General Control Register */
-	debug ("Disable PCMCIA buffers and assert RESET\n");
-	reg  = 0;
-	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
-	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
-	PCMCIA_PGCRX(slot) = reg;
-
-	udelay(10000);
-
-	return (0);
-}
-#endif	/* CFG_CMD_PCMCIA */
-
-
-static int voltage_set(int slot, int vcc, int vpp)
-{
-	volatile immap_t	*immap;
-	volatile cpm8xx_t	*cp;
-	volatile pcmconf8xx_t	*pcmp;
-	u_long reg;
-
-	debug ("voltage_set: "	\
-		PCMCIA_BOARD_MSG	\
-		" Slot %c, Vcc=%d.%d, Vpp=%d.%d\n",
-		'A'+slot, vcc/10, vcc%10, vpp/10, vcc%10);
-
-	if (!slot) /* Slot A is not configurable */
-		return 0;
-
-	immap = (immap_t *)CFG_IMMR;
-	pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
-	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
-
-	/*
-	 * Disable PCMCIA buffers (isolate the interface)
-	 * and assert RESET signal
-	 */
-	debug ("Disable PCMCIA buffers and assert RESET\n");
-	reg  = PCMCIA_PGCRX(slot);
-	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
-	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
-	PCMCIA_PGCRX(slot) = reg;
-	udelay(500);
-
-	debug ("PCMCIA power OFF\n");
-	/*
-	 * Configure Port B pins for
-	 * 3 Volts enable
-	 */
-	cp->cp_pbdir |=  KUP4K_PCMCIA_B_3V3;
-	cp->cp_pbpar &= ~KUP4K_PCMCIA_B_3V3;
-	/* remove all power */
-	cp->cp_pbdat |=  KUP4K_PCMCIA_B_3V3; /* active low */
-
-	switch(vcc) {
-	case  0: 		break;
-	case 33:
-		cp->cp_pbdat &= ~KUP4K_PCMCIA_B_3V3;
-		debug ("PCMCIA powered at 3.3V\n");
-		break;
-	case 50:
-		debug ("PCMCIA: 5Volt vcc not supported\n");
-		break;
-	default:
-		puts("PCMCIA: vcc not supported");
-		break;
-	}
-	udelay(10000);
-	/* Checking supported voltages */
-
-	debug ("PIPR: 0x%x --> %s\n",
-		pcmp->pcmc_pipr,
-		   (pcmp->pcmc_pipr & (0x80000000 >> (slot << 4)))
-			? "only 5 V --> NOT SUPPORTED"
-			: "can do 3.3V");
-
-
-	debug ("Enable PCMCIA buffers and stop RESET\n");
-	reg  =  PCMCIA_PGCRX(slot);
-	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
-	reg &= ~__MY_PCMCIA_GCRX_CXOE;		/* active low  */
-	PCMCIA_PGCRX(slot) = reg;
-	udelay(500);
-
-	debug ("voltage_set: " PCMCIA_BOARD_MSG " Slot %c, DONE\n",
-		slot+'A');
-	return (0);
-}
-
-#endif	/* KUP4K || KUP4X */
-
-
-/* -------------------------------------------------------------------- */
-/* End of Board Specific Stuff						*/
-/* -------------------------------------------------------------------- */
-
-
-/* -------------------------------------------------------------------- */
-/* MPC8xx Specific Stuff - should go to MPC8xx directory		*/
-/* -------------------------------------------------------------------- */
-
-/*
- * Search this table to see if the windowsize is
- * supported...
- */
-
-#define M8XX_SIZES_NO 32
-
-static const u_int m8xx_size_to_gray[M8XX_SIZES_NO] =
-{ 0x00000001, 0x00000002, 0x00000008, 0x00000004,
-  0x00000080, 0x00000040, 0x00000010, 0x00000020,
-  0x00008000, 0x00004000, 0x00001000, 0x00002000,
-  0x00000100, 0x00000200, 0x00000800, 0x00000400,
-
-  0x0fffffff, 0xffffffff, 0xffffffff, 0xffffffff,
-  0x01000000, 0x02000000, 0xffffffff, 0x04000000,
-  0x00010000, 0x00020000, 0x00080000, 0x00040000,
-  0x00800000, 0x00400000, 0x00100000, 0x00200000 };
-
-
-/* -------------------------------------------------------------------- */
-
-#if ( ! defined(CONFIG_I82365) && ! defined(CONFIG_PXA_PCMCIA) )
-
-static u_int m8xx_get_graycode(u_int size)
-{
-	u_int k;
-
-	for (k = 0; k < M8XX_SIZES_NO; k++) {
-		if(m8xx_size_to_gray[k] == size)
-			break;
-	}
-
-	if((k == M8XX_SIZES_NO) || (m8xx_size_to_gray[k] == -1))
-		k = -1;
-
-	return k;
-}
-
-#endif	/* CONFIG_I82365 */
-
-/* -------------------------------------------------------------------- */
-
-#if 0
-static u_int m8xx_get_speed(u_int ns, u_int is_io)
-{
-	u_int reg, clocks, psst, psl, psht;
-
-	if(!ns) {
-
-		/*
-		 * We get called with IO maps setup to 0ns
-		 * if not specified by the user.
-		 * They should be 255ns.
-		 */
-
-		if(is_io)
-			ns = 255;
-		else
-			ns = 100;  /* fast memory if 0 */
-	}
-
-	/*
-	 * In PSST, PSL, PSHT fields we tell the controller
-	 * timing parameters in CLKOUT clock cycles.
-	 * CLKOUT is the same as GCLK2_50.
-	 */
-
-/* how we want to adjust the timing - in percent */
-
-#define ADJ 180 /* 80 % longer accesstime - to be sure */
-
-	clocks = ((M8XX_BUSFREQ / 1000) * ns) / 1000;
-	clocks = (clocks * ADJ) / (100*1000);
-
-	if(clocks >= PCMCIA_BMT_LIMIT) {
-		DEBUG(0, "Max access time limit reached\n");
-		clocks = PCMCIA_BMT_LIMIT-1;
-	}
-
-	psst = clocks / 7;          /* setup time */
-	psht = clocks / 7;          /* hold time */
-	psl  = (clocks * 5) / 7;    /* strobe length */
-
-	psst += clocks - (psst + psht + psl);
-
-	reg =  psst << 12;
-	reg |= psl  << 7;
-	reg |= psht << 16;
-
-	return reg;
-}
-#endif
-
-/* -------------------------------------------------------------------- */
-
-#if defined(CONFIG_IDE_8xx_PCCARD) || defined(CONFIG_PXA_PCMCIA)
-static void print_funcid (int func)
-{
-	puts (indent);
-	switch (func) {
-	case CISTPL_FUNCID_MULTI:
-		puts (" Multi-Function");
-		break;
-	case CISTPL_FUNCID_MEMORY:
-		puts (" Memory");
-		break;
-	case CISTPL_FUNCID_SERIAL:
-		puts (" Serial Port");
-		break;
-	case CISTPL_FUNCID_PARALLEL:
-		puts (" Parallel Port");
-		break;
-	case CISTPL_FUNCID_FIXED:
-		puts (" Fixed Disk");
-		break;
-	case CISTPL_FUNCID_VIDEO:
-		puts (" Video Adapter");
-		break;
-	case CISTPL_FUNCID_NETWORK:
-		puts (" Network Adapter");
-		break;
-	case CISTPL_FUNCID_AIMS:
-		puts (" AIMS Card");
-		break;
-	case CISTPL_FUNCID_SCSI:
-		puts (" SCSI Adapter");
-		break;
-	default:
-		puts (" Unknown");
-		break;
 	}
 	puts (" Card\n");
 }
-#endif	/* CONFIG_IDE_8xx_PCCARD */
-
-/* -------------------------------------------------------------------- */
 
-#if defined(CONFIG_IDE_8xx_PCCARD) || defined(CONFIG_PXA_PCMCIA)
 static void print_fixed (volatile uchar *p)
 {
 	if (p == NULL)
@@ -2804,16 +169,16 @@ static void print_fixed (volatile uchar *p)
 	puts(indent);
 
 	switch (*p) {
-	case CISTPL_FUNCE_IDE_IFACE:
-	    {   uchar iface = *(p+2);
+		case CISTPL_FUNCE_IDE_IFACE:
+		{   uchar iface = *(p+2);
 
 		puts ((iface == CISTPL_IDE_INTERFACE) ? " IDE" : " unknown");
 		puts (" interface ");
 		break;
-	    }
-	case CISTPL_FUNCE_IDE_MASTER:
-	case CISTPL_FUNCE_IDE_SLAVE:
-	    {   uchar f1 = *(p+2);
+		}
+		case CISTPL_FUNCE_IDE_MASTER:
+		case CISTPL_FUNCE_IDE_SLAVE:
+		{   uchar f1 = *(p+2);
 		uchar f2 = *(p+4);
 
 		puts ((f1 & CISTPL_IDE_SILICON) ? " [silicon]" : " [rotating]");
@@ -2845,23 +210,10 @@ static void print_fixed (volatile uchar *p)
 			puts (" [IOis16]");
 
 		break;
-	    }
+		}
 	}
 	putc ('\n');
 }
-#endif	/* CONFIG_IDE_8xx_PCCARD */
-
-/* -------------------------------------------------------------------- */
-
-#if defined(CONFIG_IDE_8xx_PCCARD) || defined(CONFIG_PXA_PCMCIA)
-
-#define MAX_IDENT_CHARS		64
-#define	MAX_IDENT_FIELDS	4
-
-static uchar *known_cards[] = {
-	(uchar *)"ARGOSY PnPIDE D5",
-	NULL
-};
 
 static int identify  (volatile uchar *p)
 {
@@ -2913,576 +265,101 @@ static int identify  (volatile uchar *p)
 
 	return (0);	/* don't know */
 }
-#endif	/* CONFIG_IDE_8xx_PCCARD */
-
-/* -------------------------------------------------------------------- */
-/* NETTA board by Intracom S.A.						*/
-/* -------------------------------------------------------------------- */
-
-#if defined(CONFIG_NETTA)
-
-/* some sane bit macros */
-#define _BD(_b)				(1U << (31-(_b)))
-#define _BDR(_l, _h)			(((((1U << (31-(_l))) - 1) << 1) | 1) & ~((1U << (31-(_h))) - 1))
-
-#define _BW(_b)				(1U << (15-(_b)))
-#define _BWR(_l, _h)			(((((1U << (15-(_l))) - 1) << 1) | 1) & ~((1U << (15-(_h))) - 1))
-
-#define _BB(_b)				(1U << (7-(_b)))
-#define _BBR(_l, _h)			(((((1U << (7-(_l))) - 1) << 1) | 1) & ~((1U << (7-(_h))) - 1))
-
-#define _B(_b)				_BD(_b)
-#define _BR(_l, _h)			_BDR(_l, _h)
 
-#define PCMCIA_BOARD_MSG "NETTA"
-
-static const unsigned short vppd_masks[2] = { _BW(14), _BW(15) };
-
-static void cfg_vppd(int no)
-{
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	unsigned short mask;
-
-	if ((unsigned int)no >= sizeof(vppd_masks)/sizeof(vppd_masks[0]))
-		return;
-
-	mask = vppd_masks[no];
-
-	immap->im_ioport.iop_papar &= ~mask;
-	immap->im_ioport.iop_paodr &= ~mask;
-	immap->im_ioport.iop_padir |=  mask;
-}
-
-static void set_vppd(int no, int what)
+int check_ide_device (int slot)
 {
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	unsigned short mask;
-
-	if ((unsigned int)no >= sizeof(vppd_masks)/sizeof(vppd_masks[0]))
-		return;
-
-	mask = vppd_masks[no];
-
-	if (what)
-		immap->im_ioport.iop_padat |= mask;
-	else
-		immap->im_ioport.iop_padat &= ~mask;
-}
-
-static const unsigned short vccd_masks[2] = { _BW(10), _BW(6) };
-
-static void cfg_vccd(int no)
-{
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	unsigned short mask;
-
-	if ((unsigned int)no >= sizeof(vccd_masks)/sizeof(vccd_masks[0]))
-		return;
-
-	mask = vccd_masks[no];
-
-	immap->im_ioport.iop_papar &= ~mask;
-	immap->im_ioport.iop_paodr &= ~mask;
-	immap->im_ioport.iop_padir |=  mask;
-}
-
-static void set_vccd(int no, int what)
-{
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	unsigned short mask;
-
-	if ((unsigned int)no >= sizeof(vccd_masks)/sizeof(vccd_masks[0]))
-		return;
-
-	mask = vccd_masks[no];
-
-	if (what)
-		immap->im_ioport.iop_padat |= mask;
-	else
-		immap->im_ioport.iop_padat &= ~mask;
-}
-
-static const unsigned short oc_mask = _BW(8);
-
-static void cfg_oc(void)
-{
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	unsigned short mask = oc_mask;
-
-	immap->im_ioport.iop_pcdir &= ~mask;
-	immap->im_ioport.iop_pcso  &= ~mask;
-	immap->im_ioport.iop_pcint &= ~mask;
-	immap->im_ioport.iop_pcpar &= ~mask;
-}
-
-static int get_oc(void)
-{
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	unsigned short mask = oc_mask;
-	int what;
-
-	what = !!(immap->im_ioport.iop_pcdat & mask);;
-	return what;
-}
-
-static const unsigned short shdn_mask = _BW(12);
-
-static void cfg_shdn(void)
-{
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	unsigned short mask;
-
-	mask = shdn_mask;
-
-	immap->im_ioport.iop_papar &= ~mask;
-	immap->im_ioport.iop_paodr &= ~mask;
-	immap->im_ioport.iop_padir |=  mask;
-}
-
-static void set_shdn(int what)
-{
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
-	unsigned short mask;
-
-	mask = shdn_mask;
-
-	if (what)
-		immap->im_ioport.iop_padat |= mask;
-	else
-		immap->im_ioport.iop_padat &= ~mask;
-}
-
-static void cfg_ports (void);
-
-static int hardware_enable(int slot)
-{
-	volatile immap_t	*immap;
-	volatile cpm8xx_t	*cp;
-	volatile pcmconf8xx_t	*pcmp;
-	volatile sysconf8xx_t	*sysp;
-	uint reg, pipr, mask;
+	volatile uchar *ident = NULL;
+	volatile uchar *feature_p[MAX_FEATURES];
+	volatile uchar *p, *start, *addr;
+	int n_features = 0;
+	uchar func_id = ~0;
+	uchar code, len;
+	ushort config_base = 0;
+	int found = 0;
 	int i;
 
-	debug ("hardware_enable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
-
-	udelay(10000);
-
-	immap = (immap_t *)CFG_IMMR;
-	sysp  = (sysconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_siu_conf));
-	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
-	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
-
-	/* Configure Ports for TPS2211A PC-Card Power-Interface Switch */
-	cfg_ports ();
-
-	/* clear interrupt state, and disable interrupts */
-	pcmp->pcmc_pscr =  PCMCIA_MASK(_slot_);
-	pcmp->pcmc_per &= ~PCMCIA_MASK(_slot_);
+	addr = (volatile uchar *)(CFG_PCMCIA_MEM_ADDR +
+				  CFG_PCMCIA_MEM_SIZE * (slot * 4));
+	debug ("PCMCIA MEM: %08lX\n", (ulong)addr);
 
-	/*
-	 * Disable interrupts, DMA, and PCMCIA buffers
-	 * (isolate the interface) and assert RESET signal
-	 */
-	debug ("Disable PCMCIA buffers and assert RESET\n");
-	reg  = 0;
-	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
-	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
-	PCMCIA_PGCRX(_slot_) = reg;
+	start = p = (volatile uchar *) addr;
 
-	udelay(500);
+	while ((p - start) < MAX_TUPEL_SZ) {
 
-	/*
-	 * Make sure there is a card in the slot, then configure the interface.
-	 */
-	udelay(10000);
-	debug ("[%d] %s: PIPR(%p)=0x%x\n",
-		__LINE__,__FUNCTION__,
-		&(pcmp->pcmc_pipr),pcmp->pcmc_pipr);
-	if (pcmp->pcmc_pipr & (0x18000000 >> (slot << 4))) {
-		printf ("   No Card found\n");
-		return (1);
-	}
+		code = *p; p += 2;
 
-	/*
-	 * Power On: Set VAVCC to 3.3V or 5V, set VAVPP to Hi-Z
-	 */
-	mask = PCMCIA_VS1(slot) | PCMCIA_VS2(slot);
-	pipr = pcmp->pcmc_pipr;
-	debug ("PIPR: 0x%x ==> VS1=o%s, VS2=o%s\n",
-		pipr,
-		(reg&PCMCIA_VS1(slot))?"n":"ff",
-		(reg&PCMCIA_VS2(slot))?"n":"ff");
+		if (code == 0xFF) { /* End of chain */
+			break;
+		}
 
-	if ((pipr & mask) == mask) {
-		set_vppd(0, 1); set_vppd(1, 1); 		/* VAVPP => Hi-Z */
-		set_vccd(0, 0); set_vccd(1, 1); 		/* 5V on, 3V off */
-		puts (" 5.0V card found: ");
-	} else {
-		set_vppd(0, 1); set_vppd(1, 1); 		/* VAVPP => Hi-Z */
-		set_vccd(0, 1); set_vccd(1, 0); 		/* 5V off, 3V on */
-		puts (" 3.3V card found: ");
-	}
+		len = *p; p += 2;
+#if defined(DEBUG) && (DEBUG > 1)
+		{ volatile uchar *q = p;
+			printf ("\nTuple code %02x  length %d\n\tData:",
+				code, len);
 
-	/*  Wait 500 ms; use this to check for over-current */
-	for (i=0; i<5000; ++i) {
-		if (!get_oc()) {
-			printf ("   *** Overcurrent - Safety shutdown ***\n");
-			set_vccd(0, 0); set_vccd(1, 0); 		/* VAVPP => Hi-Z */
-			return (1);
+			for (i = 0; i < len; ++i) {
+				printf (" %02x", *q);
+				q+= 2;
+			}
 		}
-		udelay (100);
+#endif	/* DEBUG */
+		switch (code) {
+		case CISTPL_VERS_1:
+			ident = p + 4;
+			break;
+		case CISTPL_FUNCID:
+			/* Fix for broken SanDisk which may have 0x80 bit set */
+			func_id = *p & 0x7F;
+			break;
+		case CISTPL_FUNCE:
+			if (n_features < MAX_FEATURES)
+				feature_p[n_features++] = p;
+			break;
+		case CISTPL_CONFIG:
+			config_base = (*(p+6) << 8) + (*(p+4));
+			debug ("\n## Config_base = %04x ###\n", config_base);
+		default:
+			break;
+		}
+		p += 2 * len;
 	}
 
-	debug ("Enable PCMCIA buffers and stop RESET\n");
-	reg  =  PCMCIA_PGCRX(_slot_);
-	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
-	reg &= ~__MY_PCMCIA_GCRX_CXOE;		/* active low  */
-	PCMCIA_PGCRX(_slot_) = reg;
-
-	udelay(250000);	/* some cards need >150 ms to come up :-( */
-
-	debug ("# hardware_enable done\n");
-
-	return (0);
-}
-
-
-#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
-static int hardware_disable(int slot)
-{
-	volatile immap_t	*immap;
-	volatile pcmconf8xx_t	*pcmp;
-	u_long reg;
-
-	debug ("hardware_disable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
-
-	immap = (immap_t *)CFG_IMMR;
-	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
-
-	/* Configure PCMCIA General Control Register */
-	debug ("Disable PCMCIA buffers and assert RESET\n");
-	reg  = 0;
-	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
-	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
-	PCMCIA_PGCRX(_slot_) = reg;
-
-	/* All voltages off / Hi-Z */
-			set_vppd(0, 1); set_vppd(1, 1);
-	set_vccd(0, 1); set_vccd(1, 1);
-
-	udelay(10000);
-
-	return (0);
-}
-#endif	/* CFG_CMD_PCMCIA */
-
-
-static int voltage_set(int slot, int vcc, int vpp)
-{
-	volatile immap_t	*immap;
-	volatile cpm8xx_t	*cp;
-	volatile pcmconf8xx_t	*pcmp;
-	u_long reg;
-	ushort sreg;
-
-	debug ("voltage_set: "
-		PCMCIA_BOARD_MSG
-		" Slot %c, Vcc=%d.%d, Vpp=%d.%d\n",
-		'A'+slot, vcc/10, vcc%10, vpp/10, vcc%10);
-
-	immap = (immap_t *)CFG_IMMR;
-	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
-	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
-	/*
-	 * Disable PCMCIA buffers (isolate the interface)
-	 * and assert RESET signal
-	 */
-	debug ("Disable PCMCIA buffers and assert RESET\n");
-	reg  = PCMCIA_PGCRX(_slot_);
-	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
-	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
-	PCMCIA_PGCRX(_slot_) = reg;
-	udelay(500);
-
-	/*
-	 * Configure Port C pins for
-	 * 5 Volts Enable and 3 Volts enable,
-	 * Turn all power pins to Hi-Z
-	 */
-	debug ("PCMCIA power OFF\n");
-	cfg_ports ();	/* Enables switch, but all in Hi-Z */
-
-	sreg  = immap->im_ioport.iop_pcdat;
-	set_vppd(0, 1); set_vppd(1, 1);
-
-	switch(vcc) {
-	case  0:
-		break;	/* Switch off		*/
-
-	case 33:
-		set_vccd(0, 1); set_vccd(1, 0);
-		break;
+	found = identify (ident);
 
-	case 50:
-		set_vccd(0, 0); set_vccd(1, 1);
-		break;
+	if (func_id != ((uchar)~0)) {
+		print_funcid (func_id);
 
-	default:
-		goto done;
+		if (func_id == CISTPL_FUNCID_FIXED)
+			found = 1;
+		else
+			return (1);	/* no disk drive */
 	}
 
-	/* Checking supported voltages */
-
-	debug ("PIPR: 0x%x --> %s\n",
-		pcmp->pcmc_pipr,
-		(pcmp->pcmc_pipr & 0x00008000) ? "only 5 V" : "can do 3.3V");
-
-done:
-	debug ("Enable PCMCIA buffers and stop RESET\n");
-	reg  =  PCMCIA_PGCRX(_slot_);
-	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
-	reg &= ~__MY_PCMCIA_GCRX_CXOE;		/* active low  */
-	PCMCIA_PGCRX(_slot_) = reg;
-	udelay(500);
-
-	debug ("voltage_set: " PCMCIA_BOARD_MSG " Slot %c, DONE\n",
-		slot+'A');
-	return (0);
-}
-
-static void cfg_ports (void)
-{
-	volatile immap_t	*immap;
-	volatile cpm8xx_t	*cp;
-
-	immap = (immap_t *)CFG_IMMR;
-	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
-
-
-	cfg_vppd(0); cfg_vppd(1);	/* VPPD0,VPPD1 VAVPP => Hi-Z */
-	cfg_vccd(0); cfg_vccd(1);	/* 3V and 5V off */
-	cfg_shdn();
-	cfg_oc();
-
-	/*
-	 * Configure Port A for TPS2211 PC-Card Power-Interface Switch
-	 *
-	 * Switch off all voltages, assert shutdown
-	 */
-	set_vppd(0, 1); set_vppd(1, 1);
-	set_vccd(0, 0); set_vccd(1, 0);
-	set_shdn(1);
-
-	udelay(100000);
-}
-
-#endif	/* NETTA */
-
-
-/* -------------------------------------------------------------------- */
-/* UC100 Boards                                          		*/
-/* -------------------------------------------------------------------- */
-
-#if defined(CONFIG_UC100)
-
-#define PCMCIA_BOARD_MSG "UC100"
-
-/*
- * Remark: don't turn off OE "__MY_PCMCIA_GCRX_CXOE" on UC100 board.
- *         This leads to board-hangup! (sr, 8 Dez. 2004)
- */
-
-static void cfg_ports (void);
-
-static int hardware_enable(int slot)
-{
-	volatile immap_t	*immap;
-	volatile cpm8xx_t	*cp;
-	volatile pcmconf8xx_t	*pcmp;
-	volatile sysconf8xx_t	*sysp;
-	uint reg, mask;
-
-	debug ("hardware_enable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
-
-	udelay(10000);
-
-	immap = (immap_t *)CFG_IMMR;
-	sysp  = (sysconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_siu_conf));
-	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
-	cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
-
-	/* Configure Ports for TPS2211A PC-Card Power-Interface Switch */
-	cfg_ports ();
-
-	/*
-	 * Configure SIUMCR to enable PCMCIA port B
-	 * (VFLS[0:1] are not used for debugging, we connect FRZ# instead)
-	 */
-	sysp->sc_siumcr &= ~SIUMCR_DBGC11;	/* set DBGC to 00 */
-
-	/* clear interrupt state, and disable interrupts */
-	pcmp->pcmc_pscr =  PCMCIA_MASK(_slot_);
-	pcmp->pcmc_per &= ~PCMCIA_MASK(_slot_);
-
-	/*
-	 * Disable interrupts, DMA, and PCMCIA buffers
-	 * (isolate the interface) and assert RESET signal
-	 */
-	debug ("Disable PCMCIA buffers and assert RESET\n");
-	reg  = 0;
-	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
-	PCMCIA_PGCRX(_slot_) = reg;
-	udelay(500);
-
-	/*
-	 * Make sure there is a card in the slot, then configure the interface.
-	 */
-	udelay(10000);
-	debug ("[%d] %s: PIPR(%p)=0x%x\n",
-		__LINE__,__FUNCTION__,
-		&(pcmp->pcmc_pipr),pcmp->pcmc_pipr);
-	if (pcmp->pcmc_pipr & (0x18000000 >> (slot << 4))) {
-		printf ("   No Card found\n");
-		return (1);
+	for (i=0; i<n_features; ++i) {
+		print_fixed (feature_p[i]);
 	}
 
-	/*
-	 * Power On.
-	 */
-	mask = PCMCIA_VS1(slot) | PCMCIA_VS2(slot);
-	reg  = pcmp->pcmc_pipr;
-	debug ("PIPR: 0x%x ==> VS1=o%s, VS2=o%s\n",
-		reg,
-		(reg&PCMCIA_VS1(slot))?"n":"ff",
-		(reg&PCMCIA_VS2(slot))?"n":"ff");
-	if ((reg & mask) == mask) {
-		puts (" 5.0V card found: ");
-	} else {
-		puts (" 3.3V card found: ");
+	if (!found) {
+		printf ("unknown card type\n");
+		return (1);
 	}
 
-	/*  switch VCC on */
-	immap->im_ioport.iop_padat |= 0x8000; /* power enable 3.3V */
-
-	udelay(10000);
-
-	debug ("Enable PCMCIA buffers and stop RESET\n");
-	reg  =  PCMCIA_PGCRX(_slot_);
-	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
-	reg &= ~__MY_PCMCIA_GCRX_CXOE;		/* active low  */
-	PCMCIA_PGCRX(_slot_) = reg;
-
-	udelay(250000);	/* some cards need >150 ms to come up :-( */
-
-	debug ("# hardware_enable done\n");
-
-	return (0);
-}
-
-
-#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
-static int hardware_disable(int slot)
-{
-	volatile immap_t	*immap;
-	volatile cpm8xx_t	*cp;
-	volatile pcmconf8xx_t	*pcmp;
-	u_long reg;
-
-	debug ("hardware_disable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
-
-	immap = (immap_t *)CFG_IMMR;
-	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
-
-	/* switch VCC off */
-	immap->im_ioport.iop_padat &= ~0x8000; /* power disable 3.3V */
-
-	/* Configure PCMCIA General Control Register */
-	debug ("Disable PCMCIA buffers and assert RESET\n");
-	reg  = 0;
-	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
-	PCMCIA_PGCRX(_slot_) = reg;
-
-	udelay(10000);
-
-	return (0);
-}
-#endif	/* CFG_CMD_PCMCIA */
-
-
-static int voltage_set(int slot, int vcc, int vpp)
-{
-	volatile immap_t	*immap;
-	volatile pcmconf8xx_t	*pcmp;
-	u_long reg;
-
-	debug ("voltage_set: "
-		PCMCIA_BOARD_MSG
-		" Slot %c, Vcc=%d.%d, Vpp=%d.%d\n",
-		'A'+slot, vcc/10, vcc%10, vpp/10, vcc%10);
-
-	immap = (immap_t *)CFG_IMMR;
-	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
-	/*
-	 * Disable PCMCIA buffers (isolate the interface)
-	 * and assert RESET signal
-	 */
-	debug ("Disable PCMCIA buffers and assert RESET\n");
-	reg  = PCMCIA_PGCRX(_slot_);
-	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
-	PCMCIA_PGCRX(_slot_) = reg;
-	udelay(500);
-
-	/*
-	 * Configure Port C pins for
-	 * 5 Volts Enable and 3 Volts enable,
-	 * Turn all power pins to Hi-Z
-	 */
-	debug ("PCMCIA power OFF\n");
-	cfg_ports ();	/* Enables switch, but all in Hi-Z */
-
-	debug ("Enable PCMCIA buffers and stop RESET\n");
-	reg  =  PCMCIA_PGCRX(_slot_);
-	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
-	reg &= ~__MY_PCMCIA_GCRX_CXOE;		/* active low  */
-	PCMCIA_PGCRX(_slot_) = reg;
-	udelay(500);
+	ide_devices_found |= (1 << slot);
 
-	debug ("voltage_set: " PCMCIA_BOARD_MSG " Slot %c, DONE\n",
-		slot+'A');
+#if CONFIG_CPC45
+#else
+	/* set I/O area in config reg -> only valid for ARGOSY D5!!! */
+	*((uchar *)(addr + config_base)) = 1;
+#endif
+#if 0
+	printf("\n## Config_base = %04x ###\n", config_base);
+	printf("Configuration Option Register: %02x @ %x\n", readb(addr + config_base), addr + config_base);
+	printf("Card Configuration and Status Register: %02x\n", readb(addr + config_base + 2));
+	printf("Pin Replacement Register Register: %02x\n", readb(addr + config_base + 4));
+	printf("Socket and Copy Register: %02x\n", readb(addr + config_base + 6));
+#endif
 	return (0);
 }
 
-static void cfg_ports (void)
-{
-	volatile immap_t	*immap;
-
-	immap = (immap_t *)CFG_IMMR;
-
-	/*
-	 * Configure Port A for MAX1602 PC-Card Power-Interface Switch
-	 */
-	immap->im_ioport.iop_padat &= ~0x8000;	/* set port x output to low */
-	immap->im_ioport.iop_padir |= 0x8000;	/* enable port x as output */
-
-	debug ("Set Port A: PAR: %08x DIR: %08x DAT: %08x\n",
-	       immap->im_ioport.iop_papar, immap->im_ioport.iop_padir,
-	       immap->im_ioport.iop_padat);
-}
-
-#endif	/* UC100 */
-
-
-/* -------------------------------------------------------------------- */
-
-#endif /* CFG_CMD_PCMCIA || (CFG_CMD_IDE && CONFIG_IDE_8xx_PCCARD) */
-
-/**************************************************/
-
-#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
-U_BOOT_CMD(
-	pinit,	2,	1,	do_pinit,
-	"pinit   - PCMCIA sub-system\n",
-	"on  - power on PCMCIA socket\n"
-	"pinit off - power off PCMCIA socket\n"
-);
-#endif
+#endif	/* CHECK_IDE_DEVICE */
diff --git a/common/cmd_reginfo.c b/common/cmd_reginfo.c
index 15ac16aef4..f428f7e9aa 100644
--- a/common/cmd_reginfo.c
+++ b/common/cmd_reginfo.c
@@ -328,7 +328,7 @@ int do_reginfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		(*(volatile ulong*)MPC5XXX_ADDECR & 0x02000000) ? 1 : 0);
 	printf ("\tSDRAMCS0: %08X\n",
 		*(volatile ulong*)MPC5XXX_SDRAM_CS0CFG);
-	printf ("\tSDRAMCS0: %08X\n",
+	printf ("\tSDRAMCS1: %08X\n",
 		*(volatile ulong*)MPC5XXX_SDRAM_CS1CFG);
 #endif /* CONFIG_MPC5200 */
 	return 0;
diff --git a/common/cmd_usb.c b/common/cmd_usb.c
index fdfd042aca..28c05aa20e 100644
--- a/common/cmd_usb.c
+++ b/common/cmd_usb.c
@@ -186,7 +186,7 @@ void usb_display_conf_desc(struct usb_config_descriptor *config,struct usb_devic
 void usb_display_if_desc(struct usb_interface_descriptor *ifdesc,struct usb_device *dev)
 {
 	printf("     Interface: %d\n",ifdesc->bInterfaceNumber);
-	printf("     - Alternate Settings %d, Endpoints: %d\n",ifdesc->bAlternateSetting,ifdesc->bNumEndpoints);
+	printf("     - Alternate Setting %d, Endpoints: %d\n",ifdesc->bAlternateSetting,ifdesc->bNumEndpoints);
 	printf("     - Class ");
 	usb_display_class_sub(ifdesc->bInterfaceClass,ifdesc->bInterfaceSubClass,ifdesc->bInterfaceProtocol);
 	printf("\n");
@@ -444,6 +444,7 @@ int do_usb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 	int i;
 	struct usb_device *dev = NULL;
+	extern char usb_started;
 #ifdef CONFIG_USB_STORAGE
 	block_dev_desc_t *stor_dev;
 #endif
@@ -477,6 +478,10 @@ int do_usb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 		usb_stop();
 		return 0;
 	}
+	if (!usb_started) {
+		printf("USB is stopped. Please issue 'usb start' first.\n");
+		return 1;
+	}
 	if (strncmp(argv[1],"tree",4) == 0) {
 		printf("\nDevice Tree:\n");
 		usb_show_tree(usb_get_dev_index(0));
diff --git a/common/crc16.c b/common/crc16.c
index 3cef106007..6904365e59 100644
--- a/common/crc16.c
+++ b/common/crc16.c
@@ -101,7 +101,7 @@ cyg_crc16(unsigned char *buf, int len)
 
     cksum = 0;
     for (i = 0;  i < len;  i++) {
-        cksum = crc16_tab[((cksum>>8) ^ *buf++) & 0xFF] ^ (cksum << 8);
+	cksum = crc16_tab[((cksum>>8) ^ *buf++) & 0xFF] ^ (cksum << 8);
     }
     return cksum;
 }
diff --git a/common/main.c b/common/main.c
index 758ef8d32b..3788bd5e4a 100644
--- a/common/main.c
+++ b/common/main.c
@@ -2,6 +2,10 @@
  * (C) Copyright 2000
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
+ * Add to readline cmdline-editing by
+ * (C) Copyright 2005
+ * JinHua Luo, GuangDong Linux Center, <luo.jinhua@gd-linux.com>
+ *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
@@ -49,7 +53,6 @@ extern int do_bootd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
 
 #define MAX_DELAY_STOP_STR 32
 
-static char * delete_char (char *buffer, char *p, int *colp, int *np, int plen);
 static int parse_line (char *, char *[]);
 #if defined(CONFIG_BOOTDELAY) && (CONFIG_BOOTDELAY >= 0)
 static int abortboot(int);
@@ -59,8 +62,11 @@ static int abortboot(int);
 
 char        console_buffer[CFG_CBSIZE];		/* console I/O buffer	*/
 
+#ifndef CONFIG_CMDLINE_EDITING
+static char * delete_char (char *buffer, char *p, int *colp, int *np, int plen);
 static char erase_seq[] = "\b \b";		/* erase sequence	*/
 static char   tab_seq[] = "        ";		/* used to expand TABs	*/
+#endif /* CONFIG_CMDLINE_EDITING */
 
 #ifdef CONFIG_BOOT_RETRY_TIME
 static uint64_t endtime = 0;  /* must be set, default is instant timeout */
@@ -516,6 +522,406 @@ void reset_cmd_timeout(void)
 }
 #endif
 
+#ifdef CONFIG_CMDLINE_EDITING
+
+/*
+ * cmdline-editing related codes from vivi.
+ * Author: Janghoon Lyu <nandy@mizi.com>
+ */
+
+#if 1	/* avoid redundand code -- wd */
+#define putnstr(str,n)	do {			\
+		printf ("%.*s", n, str);	\
+	} while (0)
+#else
+void putnstr(const char *str, size_t n)
+{
+	if (str == NULL)
+		return;
+
+	while (n && *str != '\0') {
+		putc(*str);
+		str++;
+		n--;
+	}
+}
+#endif
+
+#define CTL_CH(c)		((c) - 'a' + 1)
+
+#define MAX_CMDBUF_SIZE		256
+
+#define CTL_BACKSPACE		('\b')
+#define DEL			((char)255)
+#define DEL7			((char)127)
+#define CREAD_HIST_CHAR		('!')
+
+#define getcmd_putch(ch)	putc(ch)
+#define getcmd_getch()		getc()
+#define getcmd_cbeep()		getcmd_putch('\a')
+
+#define HIST_MAX		20
+#define HIST_SIZE		MAX_CMDBUF_SIZE
+
+static int hist_max = 0;
+static int hist_add_idx = 0;
+static int hist_cur = -1;
+unsigned hist_num = 0;
+
+char* hist_list[HIST_MAX];
+char hist_lines[HIST_MAX][HIST_SIZE];
+
+#define add_idx_minus_one() ((hist_add_idx == 0) ? hist_max : hist_add_idx-1)
+
+static void hist_init(void)
+{
+	int i;
+
+	hist_max = 0;
+	hist_add_idx = 0;
+	hist_cur = -1;
+	hist_num = 0;
+
+	for (i = 0; i < HIST_MAX; i++) {
+		hist_list[i] = hist_lines[i];
+		hist_list[i][0] = '\0';
+	}
+}
+
+static void cread_add_to_hist(char *line)
+{
+	strcpy(hist_list[hist_add_idx], line);
+
+	if (++hist_add_idx >= HIST_MAX)
+		hist_add_idx = 0;
+
+	if (hist_add_idx > hist_max)
+		hist_max = hist_add_idx;
+
+	hist_num++;
+}
+
+static char* hist_prev(void)
+{
+	char *ret;
+	int old_cur;
+
+	if (hist_cur < 0)
+		return NULL;
+
+	old_cur = hist_cur;
+	if (--hist_cur < 0)
+		hist_cur = hist_max;
+
+	if (hist_cur == hist_add_idx) {
+		hist_cur = old_cur;
+		ret = NULL;
+	} else
+		ret = hist_list[hist_cur];
+
+	return (ret);
+}
+
+static char* hist_next(void)
+{
+	char *ret;
+
+	if (hist_cur < 0)
+		return NULL;
+
+	if (hist_cur == hist_add_idx)
+		return NULL;
+
+	if (++hist_cur > hist_max)
+		hist_cur = 0;
+
+	if (hist_cur == hist_add_idx) {
+		ret = "";
+	} else
+		ret = hist_list[hist_cur];
+
+	return (ret);
+}
+
+#ifndef CONFIG_CMDLINE_EDITING
+static void cread_print_hist_list(void)
+{
+	int i;
+	unsigned long n;
+
+	n = hist_num - hist_max;
+
+	i = hist_add_idx + 1;
+	while (1) {
+		if (i > hist_max)
+			i = 0;
+		if (i == hist_add_idx)
+			break;
+		printf("%s\n", hist_list[i]);
+		n++;
+		i++;
+	}
+}
+#endif /* CONFIG_CMDLINE_EDITING */
+
+#define BEGINNING_OF_LINE() {			\
+	while (num) {				\
+		getcmd_putch(CTL_BACKSPACE);	\
+		num--;				\
+	}					\
+}
+
+#define ERASE_TO_EOL() {				\
+	if (num < eol_num) {				\
+		int tmp;				\
+		for (tmp = num; tmp < eol_num; tmp++)	\
+			getcmd_putch(' ');		\
+		while (tmp-- > num)			\
+			getcmd_putch(CTL_BACKSPACE);	\
+		eol_num = num;				\
+	}						\
+}
+
+#define REFRESH_TO_EOL() {			\
+	if (num < eol_num) {			\
+		wlen = eol_num - num;		\
+		putnstr(buf + num, wlen);	\
+		num = eol_num;			\
+	}					\
+}
+
+static void cread_add_char(char ichar, int insert, unsigned long *num,
+	       unsigned long *eol_num, char *buf, unsigned long len)
+{
+	unsigned long wlen;
+
+	/* room ??? */
+	if (insert || *num == *eol_num) {
+		if (*eol_num > len - 1) {
+			getcmd_cbeep();
+			return;
+		}
+		(*eol_num)++;
+	}
+
+	if (insert) {
+		wlen = *eol_num - *num;
+		if (wlen > 1) {
+			memmove(&buf[*num+1], &buf[*num], wlen-1);
+		}
+
+		buf[*num] = ichar;
+		putnstr(buf + *num, wlen);
+		(*num)++;
+		while (--wlen) {
+			getcmd_putch(CTL_BACKSPACE);
+		}
+	} else {
+		/* echo the character */
+		wlen = 1;
+		buf[*num] = ichar;
+		putnstr(buf + *num, wlen);
+		(*num)++;
+	}
+}
+
+static void cread_add_str(char *str, int strsize, int insert, unsigned long *num,
+	      unsigned long *eol_num, char *buf, unsigned long len)
+{
+	while (strsize--) {
+		cread_add_char(*str, insert, num, eol_num, buf, len);
+		str++;
+	}
+}
+
+static int cread_line(char *buf, unsigned int *len)
+{
+	unsigned long num = 0;
+	unsigned long eol_num = 0;
+	unsigned long rlen;
+	unsigned long wlen;
+	char ichar;
+	int insert = 1;
+	int esc_len = 0;
+	int rc = 0;
+	char esc_save[8];
+
+	while (1) {
+		rlen = 1;
+		ichar = getcmd_getch();
+
+		if ((ichar == '\n') || (ichar == '\r')) {
+			putc('\n');
+			break;
+		}
+
+		/*
+		 * handle standard linux xterm esc sequences for arrow key, etc.
+		 */
+		if (esc_len != 0) {
+			if (esc_len == 1) {
+				if (ichar == '[') {
+					esc_save[esc_len] = ichar;
+					esc_len = 2;
+				} else {
+					cread_add_str(esc_save, esc_len, insert,
+						      &num, &eol_num, buf, *len);
+					esc_len = 0;
+				}
+				continue;
+			}
+
+			switch (ichar) {
+
+			case 'D':	/* <- key */
+				ichar = CTL_CH('b');
+				esc_len = 0;
+				break;
+			case 'C':	/* -> key */
+				ichar = CTL_CH('f');
+				esc_len = 0;
+				break;	/* pass off to ^F handler */
+			case 'H':	/* Home key */
+				ichar = CTL_CH('a');
+				esc_len = 0;
+				break;	/* pass off to ^A handler */
+			case 'A':	/* up arrow */
+				ichar = CTL_CH('p');
+				esc_len = 0;
+				break;	/* pass off to ^P handler */
+			case 'B':	/* down arrow */
+				ichar = CTL_CH('n');
+				esc_len = 0;
+				break;	/* pass off to ^N handler */
+			default:
+				esc_save[esc_len++] = ichar;
+				cread_add_str(esc_save, esc_len, insert,
+					      &num, &eol_num, buf, *len);
+				esc_len = 0;
+				continue;
+			}
+		}
+
+		switch (ichar) {
+		case 0x1b:
+			if (esc_len == 0) {
+				esc_save[esc_len] = ichar;
+				esc_len = 1;
+			} else {
+				puts("impossible condition #876\n");
+				esc_len = 0;
+			}
+			break;
+
+		case CTL_CH('a'):
+			BEGINNING_OF_LINE();
+			break;
+		case CTL_CH('c'):	/* ^C - break */
+			*buf = '\0';	/* discard input */
+			return (-1);
+		case CTL_CH('f'):
+			if (num < eol_num) {
+				getcmd_putch(buf[num]);
+				num++;
+			}
+			break;
+		case CTL_CH('b'):
+			if (num) {
+				getcmd_putch(CTL_BACKSPACE);
+				num--;
+			}
+			break;
+		case CTL_CH('d'):
+			if (num < eol_num) {
+				wlen = eol_num - num - 1;
+				if (wlen) {
+					memmove(&buf[num], &buf[num+1], wlen);
+					putnstr(buf + num, wlen);
+				}
+
+				getcmd_putch(' ');
+				do {
+					getcmd_putch(CTL_BACKSPACE);
+				} while (wlen--);
+				eol_num--;
+			}
+			break;
+		case CTL_CH('k'):
+			ERASE_TO_EOL();
+			break;
+		case CTL_CH('e'):
+			REFRESH_TO_EOL();
+			break;
+		case CTL_CH('o'):
+			insert = !insert;
+			break;
+		case CTL_CH('x'):
+			BEGINNING_OF_LINE();
+			ERASE_TO_EOL();
+			break;
+		case DEL:
+		case DEL7:
+		case 8:
+			if (num) {
+				wlen = eol_num - num;
+				num--;
+				memmove(&buf[num], &buf[num+1], wlen);
+				getcmd_putch(CTL_BACKSPACE);
+				putnstr(buf + num, wlen);
+				getcmd_putch(' ');
+				do {
+					getcmd_putch(CTL_BACKSPACE);
+				} while (wlen--);
+				eol_num--;
+			}
+			break;
+		case CTL_CH('p'):
+		case CTL_CH('n'):
+		{
+			char * hline;
+
+			esc_len = 0;
+
+			if (ichar == CTL_CH('p'))
+				hline = hist_prev();
+			else
+				hline = hist_next();
+
+			if (!hline) {
+				getcmd_cbeep();
+				continue;
+			}
+
+			/* nuke the current line */
+			/* first, go home */
+			BEGINNING_OF_LINE();
+
+			/* erase to end of line */
+			ERASE_TO_EOL();
+
+			/* copy new line into place and display */
+			strcpy(buf, hline);
+			eol_num = strlen(buf);
+			REFRESH_TO_EOL();
+			continue;
+		}
+		default:
+			cread_add_char(ichar, insert, &num, &eol_num, buf, *len);
+			break;
+		}
+	}
+	*len = eol_num;
+	buf[eol_num] = '\0';	/* lose the newline */
+
+	if (buf[0] && buf[0] != CREAD_HIST_CHAR)
+		cread_add_to_hist(buf);
+	hist_cur = hist_add_idx;
+
+	return (rc);
+}
+
+#endif /* CONFIG_CMDLINE_EDITING */
+
 /****************************************************************************/
 
 /*
@@ -528,6 +934,21 @@ void reset_cmd_timeout(void)
  */
 int readline (const char *const prompt)
 {
+#ifdef CONFIG_CMDLINE_EDITING
+	char *p = console_buffer;
+	unsigned int len=MAX_CMDBUF_SIZE;
+	static int initted = 0;
+
+	if (!initted) {
+		hist_init();
+		initted = 1;
+	}
+
+	puts (prompt);
+
+	cread_line(p, &len);
+	return len;
+#else
 	char   *p = console_buffer;
 	int	n = 0;				/* buffer index		*/
 	int	plen = 0;			/* prompt length	*/
@@ -623,10 +1044,12 @@ int readline (const char *const prompt)
 			}
 		}
 	}
+#endif /* CONFIG_CMDLINE_EDITING */
 }
 
 /****************************************************************************/
 
+#ifndef CONFIG_CMDLINE_EDITING
 static char * delete_char (char *buffer, char *p, int *colp, int *np, int plen)
 {
 	char *s;
@@ -656,6 +1079,7 @@ static char * delete_char (char *buffer, char *p, int *colp, int *np, int plen)
 	(*np)--;
 	return (p);
 }
+#endif /* CONFIG_CMDLINE_EDITING */
 
 /****************************************************************************/
 
diff --git a/common/serial.c b/common/serial.c
index 2acbd08b16..38057d21f6 100644
--- a/common/serial.c
+++ b/common/serial.c
@@ -41,8 +41,12 @@ struct serial_device *default_serial_console (void)
    || defined(CONFIG_8xx_CONS_SCC3) || defined(CONFIG_8xx_CONS_SCC4)
 	return &serial_scc_device;
 #elif defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_440) \
-   || defined(CONFIG_405EP)
-	return &serial0_device;
+   || defined(CONFIG_405EP) || defined(CONFIG_MPC5xxx)
+#if defined(CONFIG_UART1_CONSOLE)
+		return &serial1_device;
+#else
+		return &serial0_device;
+#endif
 #else
 #error No default console
 #endif
@@ -75,7 +79,7 @@ void serial_initialize (void)
 #endif
 
 #if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_440) \
- || defined(CONFIG_405EP)
+ || defined(CONFIG_405EP) || defined(CONFIG_MPC5xxx)
 	serial_register(&serial0_device);
 	serial_register(&serial1_device);
 #endif
diff --git a/common/usb.c b/common/usb.c
index d9515e659c..0857494b27 100644
--- a/common/usb.c
+++ b/common/usb.c
@@ -72,6 +72,8 @@ static int running;
 static int asynch_allowed;
 static struct devrequest setup_packet;
 
+char usb_started; /* flag for the started/stopped USB status */
+
 /**********************************************************************
  * some forward declerations...
  */
@@ -110,10 +112,12 @@ int usb_init(void)
 		printf("scanning bus for devices... ");
 		running=1;
 		usb_scan_devices();
+		usb_started = 1;
 		return 0;
 	}
 	else {
 		printf("Error, couldn't init Lowlevel part\n");
+		usb_started = 0;
 		return -1;
 	}
 }
@@ -124,6 +128,7 @@ int usb_init(void)
 int usb_stop(void)
 {
 	asynch_allowed=1;
+	usb_started = 0;
 	usb_hub_reset();
 	return usb_lowlevel_stop();
 }
@@ -280,56 +285,68 @@ int usb_set_maxpacket(struct usb_device *dev)
 int usb_parse_config(struct usb_device *dev, unsigned char *buffer, int cfgno)
 {
 	struct usb_descriptor_header *head;
-	int index,ifno,epno;
-	ifno=-1;
-	epno=-1;
-
-	dev->configno=cfgno;
-	head =(struct usb_descriptor_header *)&buffer[0];
-	if(head->bDescriptorType!=USB_DT_CONFIG) {
-		printf(" ERROR: NOT USB_CONFIG_DESC %x\n",head->bDescriptorType);
+	int index, ifno, epno, curr_if_num;
+	int i;
+	unsigned char *ch;
+
+	ifno = -1;
+	epno = -1;
+	curr_if_num = -1;
+
+	dev->configno = cfgno;
+	head = (struct usb_descriptor_header *) &buffer[0];
+	if(head->bDescriptorType != USB_DT_CONFIG) {
+		printf(" ERROR: NOT USB_CONFIG_DESC %x\n", head->bDescriptorType);
 		return -1;
 	}
-	memcpy(&dev->config,buffer,buffer[0]);
-	dev->config.wTotalLength=swap_16(dev->config.wTotalLength);
-	dev->config.no_of_if=0;
+	memcpy(&dev->config, buffer, buffer[0]);
+	dev->config.wTotalLength = swap_16(dev->config.wTotalLength);
+	dev->config.no_of_if = 0;
 
-	index=dev->config.bLength;
+	index = dev->config.bLength;
 	/* Ok the first entry must be a configuration entry, now process the others */
-	head=(struct usb_descriptor_header *)&buffer[index];
-	while(index+1 < dev->config.wTotalLength) {
+	head = (struct usb_descriptor_header *) &buffer[index];
+	while(index + 1 < dev->config.wTotalLength) {
 		switch(head->bDescriptorType) {
 			case USB_DT_INTERFACE:
-				ifno=dev->config.no_of_if;
-				dev->config.no_of_if++; /* found an interface desc, increase numbers */
-				memcpy(&dev->config.if_desc[ifno],&buffer[index],buffer[index]); /* copy new desc */
-				dev->config.if_desc[ifno].no_of_ep=0;
-
+				if(((struct usb_interface_descriptor *) &buffer[index])->
+					bInterfaceNumber != curr_if_num) {
+					/* this is a new interface, copy new desc */
+					ifno = dev->config.no_of_if;
+					dev->config.no_of_if++;
+					memcpy(&dev->config.if_desc[ifno],
+						&buffer[index], buffer[index]);
+					dev->config.if_desc[ifno].no_of_ep = 0;
+					dev->config.if_desc[ifno].num_altsetting = 1;
+					curr_if_num = dev->config.if_desc[ifno].bInterfaceNumber;
+				} else {
+					/* found alternate setting for the interface */
+					dev->config.if_desc[ifno].num_altsetting++;
+				}
 				break;
 			case USB_DT_ENDPOINT:
-				epno=dev->config.if_desc[ifno].no_of_ep;
+				epno = dev->config.if_desc[ifno].no_of_ep;
 				dev->config.if_desc[ifno].no_of_ep++; /* found an endpoint */
-				memcpy(&dev->config.if_desc[ifno].ep_desc[epno],&buffer[index],buffer[index]);
-				dev->config.if_desc[ifno].ep_desc[epno].wMaxPacketSize
-					=swap_16(dev->config.if_desc[ifno].ep_desc[epno].wMaxPacketSize);
-				USB_PRINTF("if %d, ep %d\n",ifno,epno);
+				memcpy(&dev->config.if_desc[ifno].ep_desc[epno],
+					&buffer[index], buffer[index]);
+				dev->config.if_desc[ifno].ep_desc[epno].wMaxPacketSize =
+					swap_16(dev->config.if_desc[ifno].ep_desc[epno].wMaxPacketSize);
+				USB_PRINTF("if %d, ep %d\n", ifno, epno);
 				break;
 			default:
-				if(head->bLength==0)
+				if(head->bLength == 0)
 					return 1;
-				USB_PRINTF("unknown Description Type : %x\n",head->bDescriptorType);
+				USB_PRINTF("unknown Description Type : %x\n", head->bDescriptorType);
 				{
-					int i;
-					unsigned char *ch;
-					ch=(unsigned char *)head;
-					for(i=0;i<head->bLength; i++)
-						USB_PRINTF("%02X ",*ch++);
+					ch = (unsigned char *)head;
+					for(i = 0; i < head->bLength; i++)
+						USB_PRINTF("%02X ", *ch++);
 					USB_PRINTF("\n\n\n");
 				}
 				break;
 		}
-		index+=head->bLength;
-		head=(struct usb_descriptor_header *)&buffer[index];
+		index += head->bLength;
+		head = (struct usb_descriptor_header *)&buffer[index];
 	}
 	return 1;
 }
@@ -443,6 +460,14 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate)
 		printf("selecting invalid interface %d", interface);
 		return -1;
 	}
+	/*
+	 * We should return now for devices with only one alternate setting.
+	 * According to 9.4.10 of the Universal Serial Bus Specification Revision 2.0
+	 * such devices can return with a STALL. This results in some USB sticks
+	 * timeouting during initialization and then being unusable in U-Boot.
+	 */
+	if (if_face->num_altsetting == 1)
+		return 0;
 
 	if ((ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 	    USB_REQ_SET_INTERFACE, USB_RECIP_INTERFACE, alternate,
diff --git a/common/usb_storage.c b/common/usb_storage.c
index 99e4ab0d23..e64470cb91 100644
--- a/common/usb_storage.c
+++ b/common/usb_storage.c
@@ -1139,6 +1139,10 @@ int usb_stor_get_info(struct usb_device *dev,struct us_data *ss,block_dev_desc_t
 	    /* USB007 Mini-USB2 Flash Drive */
 	    (dev->descriptor.idVendor == 0x066f &&
 	     dev->descriptor.idProduct == 0x2010)
+	    ||
+	    /* SanDisk Corporation Cruzer Micro 20044318410546613953 */
+	    (dev->descriptor.idVendor == 0x0781 &&
+	     dev->descriptor.idProduct == 0x5151)
 	    )
 		USB_STOR_PRINTF("usb_stor_get_info: skipping RESET..\n");
 	else
diff --git a/common/xyzModem.c b/common/xyzModem.c
index 9b455a314a..d1d66e8bb3 100644
--- a/common/xyzModem.c
+++ b/common/xyzModem.c
@@ -261,8 +261,8 @@ zm_dprintf(char *fmt, ...)
 static void
 zm_flush(void)
 {
-    char *p = zm_out_start;
 #ifdef REDBOOT
+    char *p = zm_out_start;
     while (*p) mon_write_char(*p++);
 #endif
     zm_out = zm_out_start;
diff --git a/config.mk b/config.mk
index c7b841da59..b59667a833 100644
--- a/config.mk
+++ b/config.mk
@@ -112,7 +112,7 @@ OBJDUMP = $(CROSS_COMPILE)objdump
 RANLIB	= $(CROSS_COMPILE)RANLIB
 
 RELFLAGS= $(PLATFORM_RELFLAGS)
-DBGFLAGS= -g #-DDEBUG
+DBGFLAGS= -g # -DDEBUG
 OPTFLAGS= -Os #-fomit-frame-pointer
 ifndef LDSCRIPT
 #LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot.lds.debug
diff --git a/cpu/74xx_7xx/cpu.c b/cpu/74xx_7xx/cpu.c
index 706c880db1..ca45e17edb 100644
--- a/cpu/74xx_7xx/cpu.c
+++ b/cpu/74xx_7xx/cpu.c
@@ -215,7 +215,8 @@ soft_restart(unsigned long addr)
 
 #if !defined(CONFIG_PCIPPC2) && \
     !defined(CONFIG_BAB7xx)  && \
-    !defined(CONFIG_ELPPC)
+    !defined(CONFIG_ELPPC)   && \
+    !defined(CONFIG_PPMC7XX)
 /* no generic way to do board reset. simply call soft_reset. */
 void
 do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
diff --git a/cpu/74xx_7xx/start.S b/cpu/74xx_7xx/start.S
index ff1cce55d8..1fc0fe6bc1 100644
--- a/cpu/74xx_7xx/start.S
+++ b/cpu/74xx_7xx/start.S
@@ -756,7 +756,8 @@ in_ram:
 #if defined(CONFIG_AMIGAONEG3SE) || \
     defined(CONFIG_DB64360)	 || \
     defined(CONFIG_DB64460)      || \
-    defined(CONFIG_CPCI750)
+    defined(CONFIG_CPCI750)	|| \
+    defined(CONFIG_PPMC7XX)
 	mr	r4, r9		/* Use RAM copy of the global data */
 #endif
 	bl	after_reloc
diff --git a/cpu/arm920t/s3c24x0/i2c.c b/cpu/arm920t/s3c24x0/i2c.c
index ef56cd1c31..374b683137 100644
--- a/cpu/arm920t/s3c24x0/i2c.c
+++ b/cpu/arm920t/s3c24x0/i2c.c
@@ -153,7 +153,7 @@ void i2c_init (int speed, int slaveadd)
 #endif
 #ifdef CONFIG_S3C2400
 		/* set I2CSDA and I2CSCL (PG5, PG6) to GPIO */
-		gpio->PGCON = (gpio->PGCON & ~0x00003c00) | 0x00000c00;
+		gpio->PGCON = (gpio->PGCON & ~0x00003c00) | 0x00001000;
 #endif
 
 		/* toggle I2CSCL until bus idle */
diff --git a/cpu/arm920t/s3c24x0/interrupts.c b/cpu/arm920t/s3c24x0/interrupts.c
index 3ec9b5400e..1b364123dc 100644
--- a/cpu/arm920t/s3c24x0/interrupts.c
+++ b/cpu/arm920t/s3c24x0/interrupts.c
@@ -176,7 +176,9 @@ ulong get_tbclk (void)
 
 #if defined(CONFIG_SMDK2400) || defined(CONFIG_TRAB)
 	tbclk = timer_load_val * 100;
-#elif defined(CONFIG_SMDK2410) || defined(CONFIG_VCMA9)
+#elif defined(CONFIG_SBC2410X) || \
+      defined(CONFIG_SMDK2410) || \
+      defined(CONFIG_VCMA9)
 	tbclk = CFG_HZ;
 #else
 #	error "tbclk not configured"
diff --git a/cpu/ixp/npe/include/IxEthDB.h b/cpu/ixp/npe/include/IxEthDB.h
index 43ee802d64..1189c9a140 100644
--- a/cpu/ixp/npe/include/IxEthDB.h
+++ b/cpu/ixp/npe/include/IxEthDB.h
@@ -799,10 +799,10 @@ IxEthDBStatus ixEthDBFilteringDatabaseShowRecords(IxEthDBPortId portID, IxEthDBR
  * @verbatim
     IxEthDBPortMap portMap;
     
-    /* clear all ports from port map */
+    // clear all ports from port map
     memset(portMap, 0, sizeof (portMap)); 
     
-    /* include portID in port map  */
+    // include portID in port map 
     portMap[portID / 8] = 1 << (portID % 8);
    @endverbatim
  *
diff --git a/cpu/mcf52x2/cpu.c b/cpu/mcf52x2/cpu.c
index e6e5d9bee9..aa6b2bd670 100644
--- a/cpu/mcf52x2/cpu.c
+++ b/cpu/mcf52x2/cpu.c
@@ -2,6 +2,10 @@
  * (C) Copyright 2003
  * Josef Baumgartner <josef.baumgartner@telex.de>
  *
+ * MCF5282 additionals
+ * (C) Copyright 2005
+ * BuS Elektronik GmbH & Co. KG <esw@bus-elektronik.de>
+ *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
@@ -36,7 +40,8 @@
 #endif
 
 #ifdef	CONFIG_M5282
-
+#include <asm/m5282.h>
+#include <asm/immap_5282.h>
 #endif
 
 #ifdef	CONFIG_M5249
@@ -116,7 +121,6 @@ int checkcpu(void) {
 	return 0;
 };
 
-
 #if defined(CONFIG_WATCHDOG)
 /* Called by macro WATCHDOG_RESET */
 void watchdog_reset (void)
@@ -158,11 +162,25 @@ int watchdog_init (void)
 #ifdef	CONFIG_M5282
 int checkcpu (void)
 {
-	puts ("CPU:   Freescale Coldfire MCF5282\n");
+	unsigned char resetsource = MCFRESET_RSR;
+
+	printf ("CPU:   Freescale Coldfire MCF5282 (PIN: %2.2x REV: %2.2x)\n",
+		MCFCCM_CIR>>8,MCFCCM_CIR & MCFCCM_CIR_PRN_MASK);
+	printf ("Reset:%s%s%s%s%s%s%s\n",
+		(resetsource & MCFRESET_RSR_LOL)  ? " Loss of Lock"	: "",
+		(resetsource & MCFRESET_RSR_LOC)  ? " Loss of Clock"	: "",
+		(resetsource & MCFRESET_RSR_EXT)  ? " External"		: "",
+		(resetsource & MCFRESET_RSR_POR)  ? " Power On"		: "",
+		(resetsource & MCFRESET_RSR_WDR)  ? " Watchdog"		: "",
+		(resetsource & MCFRESET_RSR_SOFT) ? " Software"		: "",
+		(resetsource & MCFRESET_RSR_LVD)  ? " Low Voltage"	: ""
+	);
 	return 0;
 }
 
-int do_reset (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[]) {
+int do_reset (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[])
+{
+	MCFRESET_RCR = MCFRESET_RCR_SOFTRST;
 	return 0;
 };
 #endif
diff --git a/cpu/mcf52x2/cpu_init.c b/cpu/mcf52x2/cpu_init.c
index 451e3f3f10..1748ea9d9b 100644
--- a/cpu/mcf52x2/cpu_init.c
+++ b/cpu/mcf52x2/cpu_init.c
@@ -2,6 +2,10 @@
  * (C) Copyright 2003
  * Josef Baumgartner <josef.baumgartner@telex.de>
  *
+ * MCF5282 additionals
+ * (C) Copyright 2005
+ * BuS Elektronik GmbH & Co. KG <esw@bus-elektronik.de>
+ *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
@@ -172,7 +176,180 @@ int cpu_init_r	(void)
  */
 void cpu_init_f (void)
 {
+#ifndef CONFIG_WATCHDOG
+	/* disable watchdog if we aren't using it */
+	MCFWTM_WCR = 0;
+#endif
+
+#ifndef CONFIG_MONITOR_IS_IN_RAM
+	/* Set speed /PLL */
+	MCFCLOCK_SYNCR =  MCFCLOCK_SYNCR_MFD(CFG_MFD) | MCFCLOCK_SYNCR_RFD(CFG_RFD);
+
+	/* Set up the GPIO ports */
+#ifdef CFG_PEPAR
+	MCFGPIO_PEPAR = CFG_PEPAR;
+#endif
+#ifdef	CFG_PFPAR
+	MCFGPIO_PFPAR = CFG_PFPAR;
+#endif
+#ifdef CFG_PJPAR
+	MCFGPIO_PJPAR = CFG_PJPAR;
+#endif
+#ifdef CFG_PSDPAR
+	MCFGPIO_PSDPAR = CFG_PSDPAR;
+#endif
+#ifdef CFG_PASPAR
+	MCFGPIO_PASPAR = CFG_PASPAR;
+#endif
+#ifdef CFG_PEHLPAR
+	MCFGPIO_PEHLPAR = CFG_PEHLPAR;
+#endif
+#ifdef CFG_PQSPAR
+	MCFGPIO_PQSPAR = CFG_PQSPAR;
+#endif
+#ifdef CFG_PTCPAR
+	MCFGPIO_PTCPAR = CFG_PTCPAR;
+#endif
+#ifdef CFG_PTDPAR
+	MCFGPIO_PTDPAR = CFG_PTDPAR;
+#endif
+#ifdef CFG_PUAPAR
+	MCFGPIO_PUAPAR = CFG_PUAPAR;
+#endif
+
+#ifdef CFG_DDRUA
+	MCFGPIO_DDRUA = CFG_DDRUA;
+#endif
+
+	/* This is probably a bad place to setup chip selects, but everyone
+	   else is doing it! */
+
+#if defined(CFG_CS0_BASE) & defined(CFG_CS0_SIZE) & \
+    defined(CFG_CS0_WIDTH) & defined(CFG_CS0_RO) & \
+	defined(CFG_CS0_WS)
+
+	MCFCSM_CSAR0 =	(CFG_CS0_BASE >> 16) & 0xFFFF;
+
+	#if (CFG_CS0_WIDTH == 8)
+		#define	 CFG_CS0_PS  MCFCSM_CSCR_PS_8
+	#elif (CFG_CS0_WIDTH == 16)
+		#define	 CFG_CS0_PS  MCFCSM_CSCR_PS_16
+	#elif (CFG_CS0_WIDTH == 32)
+		#define	 CFG_CS0_PS  MCFCSM_CSCR_PS_32
+	#else
+		#error	"CFG_CS0_WIDTH: Fault - wrong bus with for CS0"
+	#endif
+	MCFCSM_CSCR0 =	MCFCSM_CSCR_WS(CFG_CS0_WS)
+			|CFG_CS0_PS
+			|MCFCSM_CSCR_AA;
+
+	#if (CFG_CS0_RO != 0)
+		MCFCSM_CSMR0 =	MCFCSM_CSMR_BAM(CFG_CS0_SIZE-1)
+				|MCFCSM_CSMR_WP|MCFCSM_CSMR_V;
+ 	#else
+		MCFCSM_CSMR0 =	MCFCSM_CSMR_BAM(CFG_CS0_SIZE-1)|MCFCSM_CSMR_V;
+	#endif
+#else
+	#waring "Chip Select 0 are not initialized/used"
+#endif
+
+#if defined(CFG_CS1_BASE) & defined(CFG_CS1_SIZE) & \
+    defined(CFG_CS1_WIDTH) & defined(CFG_CS1_RO) & \
+	defined(CFG_CS1_WS)
+
+	MCFCSM_CSAR1 = (CFG_CS1_BASE >> 16) & 0xFFFF;
+
+	#if (CFG_CS1_WIDTH == 8)
+		#define	 CFG_CS1_PS  MCFCSM_CSCR_PS_8
+	#elif (CFG_CS1_WIDTH == 16)
+		#define	 CFG_CS1_PS  MCFCSM_CSCR_PS_16
+	#elif (CFG_CS1_WIDTH == 32)
+		#define	 CFG_CS1_PS  MCFCSM_CSCR_PS_32
+	#else
+		#error	"CFG_CS1_WIDTH: Fault - wrong bus with for CS1"
+	#endif
+	MCFCSM_CSCR1 =	MCFCSM_CSCR_WS(CFG_CS1_WS)
+			|CFG_CS1_PS
+			|MCFCSM_CSCR_AA;
+
+	#if (CFG_CS1_RO != 0)
+		MCFCSM_CSMR1 =	MCFCSM_CSMR_BAM(CFG_CS1_SIZE-1)
+				|MCFCSM_CSMR_WP
+				|MCFCSM_CSMR_V;
+ 	#else
+		MCFCSM_CSMR1 =	MCFCSM_CSMR_BAM(CFG_CS1_SIZE-1)
+				|MCFCSM_CSMR_V;
+	#endif
+#else
+	#warning "Chip Select 1 are not initialized/used"
+#endif
+
+#if defined(CFG_CS2_BASE) & defined(CFG_CS2_SIZE) & \
+    defined(CFG_CS2_WIDTH) & defined(CFG_CS2_RO) & \
+	defined(CFG_CS2_WS)
+
+	MCFCSM_CSAR2 = (CFG_CS2_BASE >> 16) & 0xFFFF;
+
+	#if (CFG_CS2_WIDTH == 8)
+		#define	 CFG_CS2_PS  MCFCSM_CSCR_PS_8
+	#elif (CFG_CS2_WIDTH == 16)
+		#define	 CFG_CS2_PS  MCFCSM_CSCR_PS_16
+	#elif (CFG_CS2_WIDTH == 32)
+		#define	 CFG_CS2_PS  MCFCSM_CSCR_PS_32
+	#else
+		#error	"CFG_CS2_WIDTH: Fault - wrong bus with for CS2"
+	#endif
+	MCFCSM_CSCR2 =	MCFCSM_CSCR_WS(CFG_CS2_WS)
+			|CFG_CS2_PS
+			|MCFCSM_CSCR_AA;
+
+	#if (CFG_CS2_RO != 0)
+		MCFCSM_CSMR2 =	MCFCSM_CSMR_BAM(CFG_CS2_SIZE-1)
+				|MCFCSM_CSMR_WP
+				|MCFCSM_CSMR_V;
+ 	#else
+		MCFCSM_CSMR2 =	MCFCSM_CSMR_BAM(CFG_CS2_SIZE-1)
+				|MCFCSM_CSMR_V;
+	#endif
+#else
+	#warning "Chip Select 2 are not initialized/used"
+#endif
+
+#if defined(CFG_CS3_BASE) & defined(CFG_CS3_SIZE) & \
+    defined(CFG_CS3_WIDTH) & defined(CFG_CS3_RO) & \
+	defined(CFG_CS3_WS)
+
+	MCFCSM_CSAR3 = (CFG_CS3_BASE >> 16) & 0xFFFF;
+
+	#if (CFG_CS3_WIDTH == 8)
+		#define	 CFG_CS3_PS  MCFCSM_CSCR_PS_8
+	#elif (CFG_CS3_WIDTH == 16)
+		#define	 CFG_CS3_PS  MCFCSM_CSCR_PS_16
+	#elif (CFG_CS3_WIDTH == 32)
+		#define	 CFG_CS3_PS  MCFCSM_CSCR_PS_32
+	#else
+		#error	"CFG_CS3_WIDTH: Fault - wrong bus with for CS1"
+	#endif
+	MCFCSM_CSCR3 =	MCFCSM_CSCR_WS(CFG_CS3_WS)
+			|CFG_CS3_PS
+			|MCFCSM_CSCR_AA;
+
+	#if (CFG_CS3_RO != 0)
+		MCFCSM_CSMR3 =	MCFCSM_CSMR_BAM(CFG_CS3_SIZE-1)
+				|MCFCSM_CSMR_WP
+				|MCFCSM_CSMR_V;
+ 	#else
+		MCFCSM_CSMR3 =	MCFCSM_CSMR_BAM(CFG_CS3_SIZE-1)
+				|MCFCSM_CSMR_V;
+	#endif
+#else
+	#warning "Chip Select 3 are not initialized/used"
+#endif
+
+#endif /* CONFIG_MONITOR_IS_IN_RAM */
 
+	/* defer enabling cache until boot (see do_go) */
+	/* icache_enable(); */
 }
 
 /*
diff --git a/cpu/mcf52x2/fec.c b/cpu/mcf52x2/fec.c
index f207dd6acb..6db6214722 100644
--- a/cpu/mcf52x2/fec.c
+++ b/cpu/mcf52x2/fec.c
@@ -205,7 +205,9 @@ int eth_rx (void)
 
 int eth_init (bd_t * bd)
 {
-
+#ifndef CFG_ENET_BD_BASE
+	DECLARE_GLOBAL_DATA_PTR;
+#endif
 	int i;
 	volatile fec_t *fecp = (fec_t *) (FEC_ADDR);
 
@@ -258,6 +260,10 @@ int eth_init (bd_t * bd)
 #else
 	/* Clear multicast address hash table
 	 */
+#ifdef	CONFIG_M5282
+	fecp->fec_ihash_table_high = 0;
+	fecp->fec_ihash_table_low = 0;
+#else
 	fecp->fec_hash_table_high = 0;
 	fecp->fec_hash_table_low = 0;
 #endif
@@ -273,7 +279,16 @@ int eth_init (bd_t * bd)
 	txIdx = 0;
 
 	if (!rtx) {
+#ifdef CFG_ENET_BD_BASE
 		rtx = (RTXBD *) CFG_ENET_BD_BASE;
+#else
+		rtx = (RTXBD *) (CFG_MONITOR_BASE+gd->reloc_off -
+				 (((PKTBUFSRX+TX_BUF_CNT)*+sizeof(cbd_t)
+				  +0xFF)
+				  & ~0xFF)
+				);
+		debug("set ENET_DB_BASE to %lX\n",(long) rtx);
+#endif
 	}
 
 	/*
@@ -307,18 +322,18 @@ int eth_init (bd_t * bd)
 
 	/* Enable MII mode
 	 */
-#if 0				/* Full duplex mode */
+
+#if 0	/* Full duplex mode */
 	fecp->fec_r_cntrl = FEC_RCNTRL_MII_MODE;
 	fecp->fec_x_cntrl = FEC_TCNTRL_FDEN;
-#else  /* Half duplex mode */
-	fecp->fec_r_cntrl = FEC_RCNTRL_MII_MODE | FEC_RCNTRL_DRT;
-#ifdef	CONFIG_M5271
-	fecp->fec_r_cntrl |= (PKT_MAXBUF_SIZE << 16); /* set max frame length */
-#endif
+#else	/* Half duplex mode */
+	fecp->fec_r_cntrl = (PKT_MAXBUF_SIZE << 16); /* set max frame length */
+	fecp->fec_r_cntrl |= FEC_RCNTRL_MII_MODE | FEC_RCNTRL_DRT;
 	fecp->fec_x_cntrl = 0;
 #endif
 	/* Set MII speed */
-	fecp->fec_mii_speed = 0x0e;
+	fecp->fec_mii_speed = (((CFG_CLK / 2) / (2500000 / 10)) + 5) / 10;
+	fecp->fec_mii_speed *= 2;
 
 	/* Configure port B for MII.
 	 */
@@ -422,7 +437,7 @@ static void mii_discover_phy (void)
 			 */
 			udelay (10000);	/* wait 10ms */
 		}
-		for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
+		for (phyno = 1; phyno < 32 && phyaddr < 0; ++phyno) {
 			phytype = mii_send (mk_mii_read (phyno, PHY_PHYIDR1));
 #ifdef ET_DEBUG
 			printf ("PHY type 0x%x pass %d type ", phytype, pass);
diff --git a/cpu/mcf52x2/serial.c b/cpu/mcf52x2/serial.c
index 10117889ad..8be09e34fe 100644
--- a/cpu/mcf52x2/serial.c
+++ b/cpu/mcf52x2/serial.c
@@ -55,45 +55,75 @@ void rs_serial_setbaudrate(int port,int baudrate)
 {
 #if defined(CONFIG_M5272) || defined(CONFIG_M5249) || defined(CONFIG_M5271)
 	volatile unsigned char	*uartp;
-#ifndef CONFIG_M5271
+# ifndef CONFIG_M5271
 	double fraction;
-#endif
+# endif
 	double clock;
 
 	if (port == 0)
-	  uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE1);
+		uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE1);
 	else
-	  uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE2);
+		uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE2);
 
-	clock = DoubleClock(baudrate);      /* Set baud above */
+	clock = DoubleClock(baudrate);	/* Set baud above */
 
-	uartp[MCFUART_UBG1] = (((int)clock >> 8) & 0xff);  /* set msb baud */
-	uartp[MCFUART_UBG2] = ((int)clock & 0xff);  /* set lsb baud */
+	uartp[MCFUART_UBG1] = (((int)clock >> 8) & 0xff);	/* set msb baud */
+	uartp[MCFUART_UBG2] = ((int)clock & 0xff);		/* set lsb baud */
 
-#ifndef CONFIG_M5271
+# ifndef CONFIG_M5271
 	fraction = ((clock - (int)clock) * 16.0) + 0.5;
-	uartp[MCFUART_UFPD] = ((int)fraction & 0xf);  /* set baud fraction adjust */
+	uartp[MCFUART_UFPD] = ((int)fraction & 0xf);	/* set baud fraction adjust */
+# endif
 #endif
+
+#if  defined(CONFIG_M5282)
+	volatile unsigned char	*uartp;
+	long clock;
+
+	switch (port) {
+	case 1:
+		uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE2);
+		break;
+	case 2:
+		uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE3);
+		break;
+	default:
+		uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE1);
+	}
+
+	clock = (long) CFG_CLK / ((long) 32 * baudrate);	/* Set baud above */
+
+	uartp[MCFUART_UBG1] = (((int)clock >> 8) & 0xff);	/* set msb baud */
+	uartp[MCFUART_UBG2] = ((int) clock & 0xff);		/* set lsb baud */
+
 #endif
 };
 
-void rs_serial_init(int port,int baudrate)
+void rs_serial_init (int port, int baudrate)
 {
-	volatile unsigned char	*uartp;
+	volatile unsigned char *uartp;
 
 	/*
-	 *	Reset UART, get it into known state...
+	 *      Reset UART, get it into known state...
 	 */
-	if (port == 0)
-		uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE1);
-	else
+	switch (port) {
+	case 1:
 		uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE2);
+		break;
+#if  defined(CONFIG_M5282)
+	case 2:
+		uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE3);
+		break;
+#endif
+	default:
+		uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE1);
+	}
 
-	uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETTX;  /* reset TX */
-	uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETRX;  /* reset RX */
+	uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETTX;	/* reset TX */
+	uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETRX;	/* reset RX */
 
-	uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETMRPTR;  /* reset MR pointer */
-	uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETERR;  /* reset Error pointer */
+	uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETMRPTR;	/* reset MR pointer */
+	uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETERR;	/* reset Error pointer */
 
 	/*
 	 * Set port for CONSOLE_BAUD_RATE, 8 data bits, 1 stop bit, no parity.
@@ -107,7 +137,7 @@ void rs_serial_init(int port,int baudrate)
 	/* Set clock Select Register: Tx/Rx clock is timer */
 	uartp[MCFUART_UCSR] = MCFUART_UCSR_RXCLKTIMER | MCFUART_UCSR_TXCLKTIMER;
 
-	rs_serial_setbaudrate(port,baudrate);
+	rs_serial_setbaudrate (port, baudrate);
 
 	/* Enable Tx/Rx */
 	uartp[MCFUART_UCR] = MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE;
@@ -169,9 +199,8 @@ void serial_putc(const char c) {
 }
 
 void serial_puts (const char *s) {
-	while (*s) {
+	while (*s)
 		serial_putc(*s++);
-	}
 }
 
 int serial_getc(void) {
diff --git a/cpu/mcf52x2/start.S b/cpu/mcf52x2/start.S
index 3ab812b3d4..8a83ca5ef7 100644
--- a/cpu/mcf52x2/start.S
+++ b/cpu/mcf52x2/start.S
@@ -55,11 +55,15 @@
  */
 _vectors:
 
-#ifndef	CONFIG_R5200
-.long	0x00000000, _START
+.long	0x00000000		/* Flash offset is 0 until we setup CS0 */
+#if defined(CONFIG_R5200)
+.long	0x400
+#elif defined(CONFIG_M5282)
+.long	_start - TEXT_BASE
 #else
-.long	0x00000000, 0x400	/* Flash offset is 0 until we setup CS0 */
+.long	_START
 #endif
+
 .long	_FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
 .long	_FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
 .long	_FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
@@ -100,20 +104,23 @@ _vectors:
 
 	.text
 
+
+#if defined(CFG_INT_FLASH_BASE) && \
+    (defined(CONFIG_M5282) || defined(CONFIG_M5281))
+	#if (TEXT_BASE == CFG_INT_FLASH_BASE)
+		.long	0x55AA55AA,0xAA55AA55 /* CFM Backdoorkey */
+		.long	0xFFFFFFFF /* all sectors protected */
+		.long	0x00000000 /* supervisor/User restriction */
+		.long	0x00000000 /* programm/data space restriction */
+		.long	0x00000000 /* Flash security */
+	#endif
+#endif
 	.globl	_start
 _start:
 	nop
 	nop
 	move.w #0x2700,%sr
 
-	/* if we come from a pre-loader we have no exception table and
-	 * therefore no VBR to set
-	 */
-#if !defined(CONFIG_MONITOR_IS_IN_RAM)
-	move.l	#CFG_FLASH_BASE, %d0
-	movec	%d0, %VBR
-#endif
-
 #if defined(CONFIG_M5272) || defined(CONFIG_M5249)
 	move.l	#(CFG_MBAR + 1), %d0		/* set MBAR address + valid flag */
 	move.c	%d0, %MBAR
@@ -128,20 +135,48 @@ _start:
 	movec	%d0, %RAMBAR0
 #endif /* #if defined(CONFIG_M5272) || defined(CONFIG_M5249) */
 
-#if	defined(CONFIG_M5282) || defined(CONFIG_M5271)
+#if defined(CONFIG_M5282) || defined(CONFIG_M5271)
 	/* Initialize IPSBAR */
 	move.l	#(CFG_MBAR + 1), %d0		/* set IPSBAR address + valid flag */
 	move.l	%d0, 0x40000000
 
-#ifdef	CONFIG_M5282
+	/* Initialize RAMBAR1: locate SRAM and validate it */
+	move.l	#(CFG_INIT_RAM_ADDR + 0x21), %d0
+	movec	%d0, %RAMBAR1
+
+#if (TEXT_BASE == CFG_INT_FLASH_BASE)
+	/* Setup code in SRAM to initialize FLASHBAR, if start from internal Flash */
+
+	move.l #(_flashbar_setup-CFG_INT_FLASH_BASE), %a0
+	move.l #(_flashbar_setup_end-CFG_INT_FLASH_BASE), %a1
+	move.l #(CFG_INIT_RAM_ADDR), %a2
+_copy_flash:
+	move.l (%a0)+, (%a2)+
+	cmp.l %a0, %a1
+	bgt.s _copy_flash
+	jmp CFG_INIT_RAM_ADDR
+
+_flashbar_setup:
 	/* Initialize FLASHBAR: locate internal Flash and validate it */
 	move.l	#(CFG_INT_FLASH_BASE + 0x21), %d0
 	movec	%d0, %RAMBAR0
-#endif
+	jmp _after_flashbar_copy.L	/* Force jump to absolute address */
+_flashbar_setup_end:
+	nop
+_after_flashbar_copy:
+#else
+	/* Setup code to initialize FLASHBAR, if start from external Memory */
+	move.l	#(CFG_INT_FLASH_BASE + 0x21), %d0
+	movec	%d0, %RAMBAR0
+#endif /* (TEXT_BASE == CFG_INT_FLASH_BASE) */
 
-	/* Initialize RAMBAR1: locate SRAM and validate it */
-	move.l	#(CFG_INIT_RAM_ADDR + 0x21), %d0
-	movec	%d0, %RAMBAR1
+#endif
+	/* if we come from a pre-loader we have no exception table and
+	 * therefore no VBR to set
+	 */
+#if !defined(CONFIG_MONITOR_IS_IN_RAM)
+	move.l	#CFG_FLASH_BASE, %d0
+	movec	%d0, %VBR
 #endif
 
 #ifdef	CONFIG_R5200
@@ -218,7 +253,6 @@ relocate_code:
 	move.l #CFG_MONITOR_BASE, %a1
 	move.l #__init_end, %a2
 	move.l %a0, %a3
-
 	/* copy the code to RAM */
 1:
 	move.l (%a1)+, (%a3)+
@@ -229,14 +263,14 @@ relocate_code:
  * We are done. Do not return, instead branch to second part of board
  * initialization, now running from RAM.
  */
-	move.l	%a0, %a1
+ 	move.l	%a0, %a1
 	add.l	#(in_ram - CFG_MONITOR_BASE), %a1
 	jmp	(%a1)
 
 in_ram:
 
 clear_bss:
-	/*
+ 	/*
 	 * Now clear BSS segment
 	 */
 	move.l	%a0, %a1
@@ -266,6 +300,23 @@ clear_bss:
 	cmp.l	%a2, %a1
 	bne	7b
 
+#if defined(CONFIG_M5281) || defined(CONFIG_M5282)
+	/* patch the 3 accesspoints to 3 ichache_state */
+	/* quick and dirty */
+
+	move.l	%a0,%d1
+	add.l	#(icache_state - CFG_MONITOR_BASE),%d1
+	move.l	%a0,%a1
+	add.l	#(icache_state_access_1+2 - CFG_MONITOR_BASE),%a1
+	move.l  %d1,(%a1)
+	move.l	%a0,%a1
+	add.l	#(icache_state_access_2+2 - CFG_MONITOR_BASE),%a1
+	move.l  %d1,(%a1)
+	move.l	%a0,%a1
+	add.l	#(icache_state_access_3+2 - CFG_MONITOR_BASE),%a1
+	move.l  %d1,(%a1)
+#endif
+
 	/* calculate relative jump to board_init_r in ram */
 	move.l %a0, %a1
 	add.l #(board_init_r - CFG_MONITOR_BASE), %a1
@@ -273,6 +324,10 @@ clear_bss:
 	/* set parameters for board_init_r */
 	move.l %a0,-(%sp)		/* dest_addr */
 	move.l %d0,-(%sp)		/* gd */
+	#if defined(DEBUG) && (TEXT_BASE != CFG_INT_FLASH_BASE) && \
+	    defined(CFG_HALT_BEFOR_RAM_JUMP)
+ 		halt
+	#endif
 	jsr	(%a1)
 
 /*------------------------------------------------------------------------------*/
@@ -327,6 +382,7 @@ icache_enable:
 	move.l	#0x80400100, %d0		/* Setup cache mask, data cache disabel*/
 	movec	%d0, %CACR			/* Enable cache */
 	moveq	#1, %d0
+icache_state_access_1:
 	move.l	%d0, icache_state
 	rts
 #endif
@@ -361,18 +417,19 @@ icache_disable:
 	movec	%d0, %ACR0			/* Enable cache */
 	movec	%d0, %ACR1			/* Enable cache */
 	moveq	#0, %d0
+icache_state_access_2:
 	move.l	%d0, icache_state
 	rts
 
 	.globl	icache_status
 icache_status:
+icache_state_access_3:
 	move.l	icache_state, %d0
 	rts
 
 	.data
 icache_state:
-	.long	1
-
+	.long	0	/* cache is diabled on inirialization */
 
 /*------------------------------------------------------------------------------*/
 
diff --git a/cpu/mips/config.mk b/cpu/mips/config.mk
index c357615c03..b29986e26b 100644
--- a/cpu/mips/config.mk
+++ b/cpu/mips/config.mk
@@ -21,7 +21,7 @@
 # MA 02111-1307 USA
 #
 v=$(shell \
-mips-linux-as --version|grep "GNU assembler"|awk '{print $$3}'|awk -F . '{print $$2}')
+$(CROSS_COMPILE)as --version|grep "GNU assembler"|awk '{print $$3}'|awk -F . '{print $$2}')
 MIPSFLAGS=$(shell \
 if [ "$v" -lt "14" ]; then \
 	echo "-mcpu=4kc"; \
diff --git a/cpu/mpc5xxx/serial.c b/cpu/mpc5xxx/serial.c
index cacb9f0573..6cb523d3c7 100644
--- a/cpu/mpc5xxx/serial.c
+++ b/cpu/mpc5xxx/serial.c
@@ -23,6 +23,9 @@
  * Hacked for MPC8260 by Murray.Jensen@cmst.csiro.au, 19-Oct-00, with
  * changes based on the file arch/ppc/mbxboot/m8260_tty.c from the
  * Linux/PPC sources (m8260_tty.c had no copyright info in it).
+ *
+ * Martin Krause, 8 Jun 2006
+ * Added CONFIG_SERIAL_MULTI support
  */
 
 /*
@@ -33,6 +36,10 @@
 #include <common.h>
 #include <mpc5xxx.h>
 
+#if defined (CONFIG_SERIAL_MULTI)
+#include <serial.h>
+#endif
+
 DECLARE_GLOBAL_DATA_PTR;
 
 #if defined(CONFIG_PSC_CONSOLE)
@@ -55,9 +62,41 @@ DECLARE_GLOBAL_DATA_PTR;
 #error CONFIG_PSC_CONSOLE must be in 1 ... 6
 #endif
 
+#if defined(CONFIG_SERIAL_MULTI) && !defined(CONFIG_PSC_CONSOLE2)
+#error you must define CONFIG_PSC_CONSOLE2 if CONFIG_SERIAL_MULTI is set
+#endif
+
+#if defined(CONFIG_SERIAL_MULTI)
+#if CONFIG_PSC_CONSOLE2 == 1
+#define PSC_BASE2 MPC5XXX_PSC1
+#elif CONFIG_PSC_CONSOLE2 == 2
+#define PSC_BASE2 MPC5XXX_PSC2
+#elif CONFIG_PSC_CONSOLE2 == 3
+#define PSC_BASE2 MPC5XXX_PSC3
+#elif defined(CONFIG_MGT5100)
+#error CONFIG_PSC_CONSOLE2 must be in 1, 2 or 3
+#elif CONFIG_PSC_CONSOLE2 == 4
+#define PSC_BASE2 MPC5XXX_PSC4
+#elif CONFIG_PSC_CONSOLE2 == 5
+#define PSC_BASE2 MPC5XXX_PSC5
+#elif CONFIG_PSC_CONSOLE2 == 6
+#define PSC_BASE2 MPC5XXX_PSC6
+#else
+#error CONFIG_PSC_CONSOLE2 must be in 1 ... 6
+#endif
+#endif /* CONFIG_SERIAL_MULTI */
+
+#if defined(CONFIG_SERIAL_MULTI)
+int serial_init_dev (unsigned long dev_base)
+#else
 int serial_init (void)
+#endif
 {
+#if defined(CONFIG_SERIAL_MULTI)
+	volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)dev_base;
+#else
 	volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
+#endif
 	unsigned long baseclk;
 	int div;
 
@@ -100,13 +139,24 @@ int serial_init (void)
 	return (0);
 }
 
-void
-serial_putc(const char c)
+#if defined(CONFIG_SERIAL_MULTI)
+void serial_putc_dev (unsigned long dev_base, const char c)
+#else
+void serial_putc(const char c)
+#endif
 {
+#if defined(CONFIG_SERIAL_MULTI)
+	volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)dev_base;
+#else
 	volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
+#endif
 
 	if (c == '\n')
+#if defined(CONFIG_SERIAL_MULTI)
+		serial_putc_dev (dev_base, '\r');
+#else
 		serial_putc('\r');
+#endif
 
 	/* Wait for last character to go. */
 	while (!(psc->psc_status & PSC_SR_TXEMP))
@@ -115,18 +165,32 @@ serial_putc(const char c)
 	psc->psc_buffer_8 = c;
 }
 
-void
-serial_puts (const char *s)
+#if defined(CONFIG_SERIAL_MULTI)
+void serial_puts_dev (unsigned long dev_base, const char *s)
+#else
+void serial_puts (const char *s)
+#endif
 {
 	while (*s) {
+#if defined(CONFIG_SERIAL_MULTI)
+		serial_putc_dev (dev_base, *s++);
+#else
 		serial_putc (*s++);
+#endif
 	}
 }
 
-int
-serial_getc(void)
+#if defined(CONFIG_SERIAL_MULTI)
+int serial_getc_dev (unsigned long dev_base)
+#else
+int serial_getc(void)
+#endif
 {
+#if defined(CONFIG_SERIAL_MULTI)
+	volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)dev_base;
+#else
 	volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
+#endif
 
 	/* Wait for a character to arrive. */
 	while (!(psc->psc_status & PSC_SR_RXRDY))
@@ -135,18 +199,32 @@ serial_getc(void)
 	return psc->psc_buffer_8;
 }
 
-int
-serial_tstc(void)
+#if defined(CONFIG_SERIAL_MULTI)
+int serial_tstc_dev (unsigned long dev_base)
+#else
+int serial_tstc(void)
+#endif
 {
+#if defined(CONFIG_SERIAL_MULTI)
+	volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)dev_base;
+#else
 	volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
+#endif
 
 	return (psc->psc_status & PSC_SR_RXRDY);
 }
 
-void
-serial_setbrg(void)
+#if defined(CONFIG_SERIAL_MULTI)
+void serial_setbrg_dev (unsigned long dev_base)
+#else
+void serial_setbrg(void)
+#endif
 {
+#if defined(CONFIG_SERIAL_MULTI)
+	volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)dev_base;
+#else
 	volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
+#endif
 	unsigned long baseclk, div;
 
 #if defined(CONFIG_MGT5100)
@@ -160,4 +238,87 @@ serial_setbrg(void)
 	psc->ctur = (div >> 8) & 0xFF;
 	psc->ctlr =  div & 0xff;
 }
+
+#if defined(CONFIG_SERIAL_MULTI)
+int serial0_init(void)
+{
+	return (serial_init_dev(PSC_BASE));
+}
+
+int serial1_init(void)
+{
+	return (serial_init_dev(PSC_BASE2));
+}
+void serial0_setbrg (void)
+{
+	serial_setbrg_dev(PSC_BASE);
+}
+void serial1_setbrg (void)
+{
+	serial_setbrg_dev(PSC_BASE2);
+}
+
+void serial0_putc(const char c)
+{
+	serial_putc_dev(PSC_BASE,c);
+}
+
+void serial1_putc(const char c)
+{
+	serial_putc_dev(PSC_BASE2, c);
+}
+void serial0_puts(const char *s)
+{
+	serial_puts_dev(PSC_BASE, s);
+}
+
+void serial1_puts(const char *s)
+{
+	serial_puts_dev(PSC_BASE2, s);
+}
+
+int serial0_getc(void)
+{
+	return(serial_getc_dev(PSC_BASE));
+}
+
+int serial1_getc(void)
+{
+	return(serial_getc_dev(PSC_BASE2));
+}
+int serial0_tstc(void)
+{
+	return (serial_tstc_dev(PSC_BASE));
+}
+
+int serial1_tstc(void)
+{
+	return (serial_tstc_dev(PSC_BASE2));
+}
+
+struct serial_device serial0_device =
+{
+	"serial0",
+	"UART0",
+	serial0_init,
+	serial0_setbrg,
+	serial0_getc,
+	serial0_tstc,
+	serial0_putc,
+	serial0_puts,
+};
+
+struct serial_device serial1_device =
+{
+	"serial1",
+	"UART1",
+	serial1_init,
+	serial1_setbrg,
+	serial1_getc,
+	serial1_tstc,
+	serial1_putc,
+	serial1_puts,
+};
+#endif /* CONFIG_SERIAL_MULTI */
+
 #endif /* CONFIG_PSC_CONSOLE */
diff --git a/cpu/mpc8xx/cpu_init.c b/cpu/mpc8xx/cpu_init.c
index 1a7111fb2a..c79e5780ad 100644
--- a/cpu/mpc8xx/cpu_init.c
+++ b/cpu/mpc8xx/cpu_init.c
@@ -161,6 +161,7 @@ void cpu_init_f (volatile immap_t * immr)
     defined(CONFIG_RMU)		|| \
     defined(CONFIG_RPXCLASSIC)	|| \
     defined(CONFIG_RPXLITE)	|| \
+    defined(CONFIG_SPC1920)	|| \
     defined(CONFIG_SPD823TS)
 
 	memctl->memc_br0 = CFG_BR0_PRELIM;
diff --git a/cpu/mpc8xx/fec.c b/cpu/mpc8xx/fec.c
index 6006478f97..6d2755e830 100644
--- a/cpu/mpc8xx/fec.c
+++ b/cpu/mpc8xx/fec.c
@@ -396,8 +396,10 @@ static void fec_pin_init(int fecidx)
 	 * * to 2.5 MHz.
 	 * * This MDC frequency is equal to system clock / (2 * MII_SPEED).
 	 * * Then MII_SPEED = system_clock / 2 * 2,5 Mhz.
+	 *
+	 * All MII configuration is done via FEC1 registers:
 	 */
-	fecp->fec_mii_speed = ((bd->bi_intfreq + 4999999) / 5000000) << 1;
+	immr->im_cpm.cp_fec1.fec_mii_speed = ((bd->bi_intfreq + 4999999) / 5000000) << 1;
 
 #if defined(CONFIG_NETTA) || defined(CONFIG_NETPHONE) || defined(CONFIG_NETTA2)
 	/* our PHYs are the limit at 2.5 MHz */
@@ -508,8 +510,6 @@ static void fec_pin_init(int fecidx)
 #if defined(CONFIG_MPC885_FAMILY) /* MPC87x/88x have got 2 FECs and different pinout */
 
 #if !defined(CONFIG_RMII)
-
-#warning this configuration is not tested; please report if it works
 		immr->im_cpm.cp_pepar     |=  0x0003fffc;
 		immr->im_cpm.cp_pedir     |=  0x0003fffc;
 		immr->im_cpm.cp_peso      &= ~0x000087fc;
@@ -822,6 +822,7 @@ static void fec_halt(struct eth_device* dev)
 #define PHY_ID_LSI80225		0x0016f870	/* LSI 80225 */
 #define PHY_ID_LSI80225B	0x0016f880	/* LSI 80225/B */
 #define PHY_ID_DM9161		0x0181B880	/* Davicom DM9161 */
+#define PHY_ID_KSM8995M		0x00221450	/* MICREL KS8995MA */
 
 /* send command to phy using mii, wait for result */
 static uint
@@ -907,6 +908,9 @@ static int mii_discover_phy(struct eth_device *dev)
 				case PHY_ID_DM9161:
 					printf("Davicom DM9161\n");
 					break;
+				case PHY_ID_KSM8995M:
+					printf("MICREL KS8995M\n");
+					break;
 				default:
 					printf("0x%08x\n", phytype);
 					break;
diff --git a/cpu/mpc8xx/serial.c b/cpu/mpc8xx/serial.c
index 26a82cc240..8ae584f2e1 100644
--- a/cpu/mpc8xx/serial.c
+++ b/cpu/mpc8xx/serial.c
@@ -227,9 +227,12 @@ static int smc_init (void)
 	sp->smc_smcm = 0;
 	sp->smc_smce = 0xff;
 
-	/* Set up the baud rate generator.
-	*/
+#ifdef CFG_SPC1920_SMC1_CLK4 /* clock source is PLD */
+	*((volatile uchar *) CFG_SPC1920_PLD_BASE+6) = 0xff;
+#else
+	/* Set up the baud rate generator */
 	smc_setbrg ();
+#endif
 
 	/* Make the first buffer the only buffer.
 	*/
diff --git a/cpu/mpc8xx/speed.c b/cpu/mpc8xx/speed.c
index 57f91c0aa0..101d5f9cb3 100644
--- a/cpu/mpc8xx/speed.c
+++ b/cpu/mpc8xx/speed.c
@@ -259,7 +259,11 @@ int get_clocks_866 (void)
 	 */
 	sccr_reg = immr->im_clkrst.car_sccr;
 	sccr_reg &= ~SCCR_EBDF11;
+#if defined(CONFIG_TQM885D)
+	if (gd->cpu_clk <= 80000000) {
+#else
 	if (gd->cpu_clk <= 66000000) {
+#endif
 		sccr_reg |= SCCR_EBDF00;	/* bus division factor = 1 */
 		gd->bus_clk = gd->cpu_clk;
 	} else {
@@ -360,7 +364,8 @@ static long init_pll_866 (long clk)
 
 #endif /* CONFIG_8xx_CPUCLK_DEFAULT */
 
-#if defined(CONFIG_TQM8xxL) && !defined(CONFIG_TQM866M)
+#if defined(CONFIG_TQM8xxL) && !defined(CONFIG_TQM866M) \
+    && !defined(CONFIG_TQM885D)
 /*
  * Adjust sdram refresh rate to actual CPU clock
  * and set timebase source according to actual CPU clock
@@ -384,6 +389,6 @@ int adjust_sdram_tbs_8xx (void)
 
 	return (0);
 }
-#endif /* CONFIG_TQM8xxL/M, !TQM866M */
+#endif /* CONFIG_TQM8xxL/M, !TQM866M, !TQM885D */
 
 /* ------------------------------------------------------------------------- */
diff --git a/cpu/nios2/epcs.c b/cpu/nios2/epcs.c
index a8851e99a2..414c38c2b1 100644
--- a/cpu/nios2/epcs.c
+++ b/cpu/nios2/epcs.c
@@ -25,7 +25,7 @@
 
 #if defined(CFG_NIOS_EPCSBASE)
 #include <command.h>
-#include <nios2.h>
+#include <asm/io.h>
 #include <nios2-io.h>
 #include <nios2-epcs.h>
 
@@ -72,8 +72,7 @@
  */
 #define EPCS_TIMEOUT		100	/* 100 msec timeout */
 
-static nios_spi_t *epcs =
-	(nios_spi_t *)CACHE_BYPASS(CFG_NIOS_EPCSBASE);
+static nios_spi_t *epcs = (nios_spi_t *)CFG_NIOS_EPCSBASE;
 
 /***********************************************************************
  * Device access
@@ -81,16 +80,20 @@ static nios_spi_t *epcs =
 static int epcs_cs (int assert)
 {
 	ulong start;
+	unsigned tmp;
+
 
 	if (assert) {
-		epcs->control |= NIOS_SPI_SSO;
+		tmp = readl (&epcs->control);
+		writel (&epcs->control, tmp | NIOS_SPI_SSO);
 	} else {
 		/* Let all bits shift out */
 		start = get_timer (0);
-		while ((epcs->status & NIOS_SPI_TMT) == 0)
+		while ((readl (&epcs->status) & NIOS_SPI_TMT) == 0)
 			if (get_timer (start) > EPCS_TIMEOUT)
 				return (-1);
-		epcs->control &= ~NIOS_SPI_SSO;
+		tmp = readl (&epcs->control);
+		writel (&epcs->control, tmp & ~NIOS_SPI_SSO);
 	}
 	return (0);
 }
@@ -100,10 +103,10 @@ static int epcs_tx (unsigned char c)
 	ulong start;
 
 	start = get_timer (0);
-	while ((epcs->status & NIOS_SPI_TRDY) == 0)
+	while ((readl (&epcs->status) & NIOS_SPI_TRDY) == 0)
 		if (get_timer (start) > EPCS_TIMEOUT)
 			return (-1);
-	epcs->txdata = c;
+	writel (&epcs->txdata, c);
 	return (0);
 }
 
@@ -112,10 +115,10 @@ static int epcs_rx (void)
 	ulong start;
 
 	start = get_timer (0);
-	while ((epcs->status & NIOS_SPI_RRDY) == 0)
+	while ((readl (&epcs->status) & NIOS_SPI_RRDY) == 0)
 		if (get_timer (start) > EPCS_TIMEOUT)
 			return (-1);
-	return (epcs->rxdata);
+	return (readl (&epcs->rxdata));
 }
 
 static unsigned char bitrev[] = {
@@ -207,6 +210,21 @@ static struct epcs_devinfo_t devinfo[] = {
 	{ 0, 0, 0, 0, 0, 0 }
 };
 
+int epcs_reset (void)
+{
+	/* When booting from an epcs controller, the epcs bootrom
+	 * code may leave the slave select in an asserted state.
+	 * This causes two problems: (1) The initial epcs access
+	 * will fail -- not a big deal, and (2) a software reset
+	 * will cause the bootrom code to hang since it does not
+	 * ensure the select is negated prior to first access -- a
+	 * big deal. Here we just negate chip select and everything
+	 * gets better :-)
+	 */
+	epcs_cs (0); /* Negate chip select */
+	return (0);
+}
+
 epcs_devinfo_t *epcs_dev_find (void)
 {
 	unsigned char buf[4];
diff --git a/cpu/nios2/exceptions.S b/cpu/nios2/exceptions.S
index d3b95cfc7a..b9c7a587e1 100644
--- a/cpu/nios2/exceptions.S
+++ b/cpu/nios2/exceptions.S
@@ -30,6 +30,9 @@
 
 	.global _exception
 
+	.set noat
+	.set nobreak
+
 _exception:
 	/* SAVE ALL REGS -- this allows trap and unimplemented
 	 * instruction handlers to be coded conveniently in C
diff --git a/cpu/nios2/interrupts.c b/cpu/nios2/interrupts.c
index 4a6da582bb..4685161b88 100644
--- a/cpu/nios2/interrupts.c
+++ b/cpu/nios2/interrupts.c
@@ -27,6 +27,7 @@
 
 #include <nios2.h>
 #include <nios2-io.h>
+#include <asm/io.h>
 #include <asm/ptrace.h>
 #include <common.h>
 #include <command.h>
@@ -79,7 +80,7 @@ void tmr_isr (void *arg)
 	/* Interrupt is cleared by writing anything to the
 	 * status register.
 	 */
-	tmr->status = 0;
+	writel (&tmr->status, 0);
 	timestamp += CFG_NIOS_TMRMS;
 #ifdef CONFIG_STATUS_LED
 	status_led_tick(timestamp);
@@ -88,16 +89,17 @@ void tmr_isr (void *arg)
 
 static void tmr_init (void)
 {
-	nios_timer_t *tmr =(nios_timer_t *)CACHE_BYPASS(CFG_NIOS_TMRBASE);
+	nios_timer_t *tmr =(nios_timer_t *)CFG_NIOS_TMRBASE;
+
+	writel (&tmr->status, 0);
+	writel (&tmr->control, 0);
+	writel (&tmr->control, NIOS_TIMER_STOP);
 
-	tmr->control &= ~(NIOS_TIMER_START | NIOS_TIMER_ITO);
-	tmr->control |= NIOS_TIMER_STOP;
 #if defined(CFG_NIOS_TMRCNT)
-	tmr->periodl = CFG_NIOS_TMRCNT & 0xffff;
-	tmr->periodh = (CFG_NIOS_TMRCNT >> 16) & 0xffff;
+	writel (&tmr->periodl, CFG_NIOS_TMRCNT & 0xffff);
+	writel (&tmr->periodh, (CFG_NIOS_TMRCNT >> 16) & 0xffff);
 #endif
-	tmr->control |= ( NIOS_TIMER_ITO |
-			  NIOS_TIMER_CONT |
+	writel (&tmr->control, NIOS_TIMER_ITO | NIOS_TIMER_CONT |
 			  NIOS_TIMER_START );
 	irq_install_handler (CFG_NIOS_TMRIRQ, tmr_isr, (void *)tmr);
 }
diff --git a/cpu/nios2/serial.c b/cpu/nios2/serial.c
index 3d766037a1..0bd3821e39 100644
--- a/cpu/nios2/serial.c
+++ b/cpu/nios2/serial.c
@@ -24,7 +24,7 @@
 
 #include <common.h>
 #include <watchdog.h>
-#include <nios2.h>
+#include <asm/io.h>
 #include <nios2-io.h>
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -34,8 +34,7 @@ DECLARE_GLOBAL_DATA_PTR;
  *-----------------------------------------------------------------*/
 #if defined(CONFIG_CONSOLE_JTAG)
 
-static nios_jtag_t *jtag =
-	(nios_jtag_t *)CACHE_BYPASS(CFG_NIOS_CONSOLE);
+static nios_jtag_t *jtag = (nios_jtag_t *)CFG_NIOS_CONSOLE;
 
 void serial_setbrg( void ){ return; }
 int serial_init( void ) { return(0);}
@@ -44,9 +43,9 @@ void serial_putc (char c)
 {
 	unsigned val;
 
-	while (NIOS_JTAG_WSPACE (jtag->control) == 0)
+	while (NIOS_JTAG_WSPACE ( readl (&jtag->control)) == 0)
 		WATCHDOG_RESET ();
-	jtag->data = (unsigned char)c;
+	writel (&jtag->data, (unsigned char)c);
 }
 
 void serial_puts (const char *s)
@@ -57,7 +56,7 @@ void serial_puts (const char *s)
 
 int serial_tstc (void)
 {
-	return (jtag->control & NIOS_JTAG_RRDY);
+	return ( readl (&jtag->control) & NIOS_JTAG_RRDY);
 }
 
 int serial_getc (void)
@@ -67,7 +66,7 @@ int serial_getc (void)
 
 	while (1) {
 		WATCHDOG_RESET ();
-		val = jtag->data;
+		val = readl (&jtag->data);
 		if (val & NIOS_JTAG_RVALID)
 			break;
 	}
@@ -80,8 +79,7 @@ int serial_getc (void)
  *-----------------------------------------------------------------*/
 #else
 
-static nios_uart_t *uart = (nios_uart_t *)
-	CACHE_BYPASS(CFG_NIOS_CONSOLE);
+static nios_uart_t *uart = (nios_uart_t *) CFG_NIOS_CONSOLE;
 
 #if defined(CFG_NIOS_FIXEDBAUD)
 
@@ -98,7 +96,7 @@ void serial_setbrg (void)
 	unsigned div;
 
 	div = (CONFIG_SYS_CLK_FREQ/gd->baudrate)-1;
-	uart->divisor = div;
+	writel (&uart->divisor,div);
 	return;
 }
 
@@ -118,9 +116,9 @@ void serial_putc (char c)
 {
 	if (c == '\n')
 		serial_putc ('\r');
-	while ((uart->status & NIOS_UART_TRDY) == 0)
+	while ((readl (&uart->status) & NIOS_UART_TRDY) == 0)
 		WATCHDOG_RESET ();
-	uart->txdata = (unsigned char)c;
+	writel (&uart->txdata,(unsigned char)c);
 }
 
 void serial_puts (const char *s)
@@ -132,14 +130,14 @@ void serial_puts (const char *s)
 
 int serial_tstc (void)
 {
-	return (uart->status & NIOS_UART_RRDY);
+	return (readl (&uart->status) & NIOS_UART_RRDY);
 }
 
 int serial_getc (void)
 {
 	while (serial_tstc () == 0)
 		WATCHDOG_RESET ();
-	return( uart->rxdata & 0x00ff );
+	return (readl (&uart->rxdata) & 0x00ff );
 }
 
 #endif /* CONFIG_JTAG_CONSOLE */
diff --git a/cpu/nios2/sysid.c b/cpu/nios2/sysid.c
index 2b7a569cc5..b5a29593ea 100644
--- a/cpu/nios2/sysid.c
+++ b/cpu/nios2/sysid.c
@@ -26,20 +26,21 @@
 #if defined (CFG_NIOS_SYSID_BASE)
 
 #include <command.h>
-#include <nios2.h>
+#include <asm/io.h>
 #include <nios2-io.h>
 #include <linux/time.h>
 
 void display_sysid (void)
 {
-	struct nios_sysid_t *sysid =
-		(struct nios_sysid_t *)CACHE_BYPASS(CFG_NIOS_SYSID_BASE);
+	struct nios_sysid_t *sysid = (struct nios_sysid_t *)CFG_NIOS_SYSID_BASE;
 	struct tm t;
 	char asc[32];
+	time_t stamp;
 
-	localtime_r ((time_t *)&sysid->timestamp, &t);
+	stamp = readl (&sysid->timestamp);
+	localtime_r (&stamp, &t);
 	asctime_r (&t, asc);
-	printf ("SYSID : %08x, %s", sysid->id, asc);
+	printf ("SYSID : %08x, %s", readl (&sysid->id), asc);
 
 }
 
diff --git a/cpu/ppc4xx/405gp_pci.c b/cpu/ppc4xx/405gp_pci.c
index fad895b319..cf5eccb01f 100644
--- a/cpu/ppc4xx/405gp_pci.c
+++ b/cpu/ppc4xx/405gp_pci.c
@@ -438,7 +438,7 @@ void pci_440_init (struct pci_controller *hose)
 	 * The PCI initialization sequence enable bit must be set ... if not abort
 	 * pci setup since updating the bit requires chip reset.
 	 *--------------------------------------------------------------------------*/
-#if defined(CONFIG_440GX) || defined(CONFIG_440SP)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
 	unsigned long strap;
 
 	mfsdr(sdr_sdstp1,strap);
@@ -465,17 +465,30 @@ void pci_440_init (struct pci_controller *hose)
 	hose->first_busno = 0;
 	hose->last_busno = 0xff;
 
+	/* PCI I/O space */
 	pci_set_region(hose->regions + reg_num++,
 		       0x00000000,
 		       PCIX0_IOBASE,
 		       0x10000,
 		       PCI_REGION_IO);
 
+	/* PCI memory space */
 	pci_set_region(hose->regions + reg_num++,
 		       CFG_PCI_TARGBASE,
 		       CFG_PCI_MEMBASE,
 		       0x10000000,
 		       PCI_REGION_MEM );
+
+#if defined(CONFIG_PCI_SYS_MEM_BUS) && defined(CONFIG_PCI_SYS_MEM_PHYS) && \
+	defined(CONFIG_PCI_SYS_MEM_SIZE)
+	/* System memory space */
+	pci_set_region(hose->regions + reg_num++,
+		       CONFIG_PCI_SYS_MEM_BUS,
+		       CONFIG_PCI_SYS_MEM_PHYS,
+		       CONFIG_PCI_SYS_MEM_SIZE,
+		       PCI_REGION_MEM | PCI_REGION_MEMORY );
+#endif
+
 	hose->region_count = reg_num;
 
 	pci_setup_indirect(hose, PCIX0_CFGADR, PCIX0_CFGDATA);
@@ -502,7 +515,7 @@ void pci_440_init (struct pci_controller *hose)
 	out16r( PCIX0_CLS, 0x00060000 ); /* Bridge, host bridge */
 #endif
 
-#if defined(CONFIG_440GX)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE)
 	out32r( PCIX0_BRDGOPT1, 0x04000060 );               /* PLB Rq pri highest   */
 	out32r( PCIX0_BRDGOPT2, in32(PCIX0_BRDGOPT2) | 0x83 ); /* Enable host config, clear Timeout, ensure int src1  */
 #elif defined(PCIX0_BRDGOPT1)
@@ -520,8 +533,13 @@ void pci_440_init (struct pci_controller *hose)
 	out32r( PCIX0_POM0SA, 0 ); /* disable */
 	out32r( PCIX0_POM1SA, 0 ); /* disable */
 	out32r( PCIX0_POM2SA, 0 ); /* disable */
+#if defined(CONFIG_440SPE)
+	out32r( PCIX0_POM0LAL, 0x10000000 );
+	out32r( PCIX0_POM0LAH, 0x0000000c );
+#else
 	out32r( PCIX0_POM0LAL, 0x00000000 );
 	out32r( PCIX0_POM0LAH, 0x00000003 );
+#endif
 	out32r( PCIX0_POM0PCIAL, CFG_PCI_MEMBASE );
 	out32r( PCIX0_POM0PCIAH, 0x00000000 );
 	out32r( PCIX0_POM0SA, 0xf0000001 ); /* 256MB, enabled */
diff --git a/cpu/ppc4xx/4xx_enet.c b/cpu/ppc4xx/4xx_enet.c
index 86dc2d066e..fab65aff78 100644
--- a/cpu/ppc4xx/4xx_enet.c
+++ b/cpu/ppc4xx/4xx_enet.c
@@ -181,6 +181,9 @@ static void ppc_4xx_eth_halt (struct eth_device *dev)
 {
 	EMAC_4XX_HW_PST hw_p = dev->priv;
 	uint32_t failsafe = 10000;
+#if defined(CONFIG_440SPE)
+	unsigned long mfr;
+#endif
 
 	out32 (EMAC_IER + hw_p->hw_addr, 0x00000000);	/* disable emac interrupts */
 
@@ -202,8 +205,23 @@ static void ppc_4xx_eth_halt (struct eth_device *dev)
 	}
 
 	/* EMAC RESET */
+#if defined(CONFIG_440SPE)
+	/* provide clocks for EMAC internal loopback  */
+	mfsdr (sdr_mfr, mfr);
+	mfr |= 0x08000000;
+	mtsdr(sdr_mfr, mfr);
+#endif
+
 	out32 (EMAC_M0 + hw_p->hw_addr, EMAC_M0_SRST);
 
+#if defined(CONFIG_440SPE)
+	/* remove clocks for EMAC internal loopback  */
+	mfsdr (sdr_mfr, mfr);
+	mfr &= ~0x08000000;
+	mtsdr(sdr_mfr, mfr);
+#endif
+
+
 #ifndef CONFIG_NETCONSOLE
 	hw_p->print_speed = 1;	/* print speed message again next time */
 #endif
@@ -301,7 +319,7 @@ int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis)
 	return ((int)pfc1);
 
 }
-#endif
+#endif	/* CONFIG_440_GX */
 
 static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
 {
@@ -314,12 +332,16 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
 	unsigned mode_reg;
 	unsigned short devnum;
 	unsigned short reg_short;
-#if defined(CONFIG_440GX) || defined(CONFIG_440SP)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
 	sys_info_t sysinfo;
-#if defined(CONFIG_440GX)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE)
 	int ethgroup = -1;
 #endif
 #endif
+#if defined(CONFIG_440SPE)
+	unsigned long mfr;
+#endif
+
 
 	EMAC_4XX_HW_PST hw_p = dev->priv;
 
@@ -330,7 +352,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
 		return -1;
 	}
 
-#if defined(CONFIG_440GX) || defined(CONFIG_440SP)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
 	/* Need to get the OPB frequency so we can access the PHY */
 	get_sys_info (&sysinfo);
 #endif
@@ -360,6 +382,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
 	hw_p->stats.pkts_tx = 0;
 	hw_p->stats.pkts_rx = 0;
 	hw_p->stats.pkts_handled = 0;
+	hw_p->print_speed = 1;	/* print speed message again next time */
 #endif
 
 	hw_p->tx_err_index = 0; /* Transmit Error Index for tx_err_log */
@@ -373,7 +396,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
 	hw_p->tx_i_index = 0;	/* Transmit Interrupt Queue Index */
 	hw_p->tx_u_index = 0;	/* Transmit User Queue Index */
 
-#if defined(CONFIG_440) && !defined(CONFIG_440SP)
+#if defined(CONFIG_440) && !defined(CONFIG_440SP) && !defined(CONFIG_440SPE)
 	/* set RMII mode */
 	/* NOTE: 440GX spec states that mode is mutually exclusive */
 	/* NOTE: Therefore, disable all other EMACS, since we handle */
@@ -406,6 +429,12 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
 	__asm__ volatile ("eieio");
 
 	/* reset emac so we have access to the phy */
+#if defined(CONFIG_440SPE)
+	/* provide clocks for EMAC internal loopback  */
+	mfsdr (sdr_mfr, mfr);
+	mfr |= 0x08000000;
+	mtsdr(sdr_mfr, mfr);
+#endif
 
 	out32 (EMAC_M0 + hw_p->hw_addr, EMAC_M0_SRST);
 	__asm__ volatile ("eieio");
@@ -416,7 +445,14 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
 		failsafe--;
 	}
 
-#if defined(CONFIG_440GX) || defined(CONFIG_440SP)
+#if defined(CONFIG_440SPE)
+	/* remove clocks for EMAC internal loopback  */
+	mfsdr (sdr_mfr, mfr);
+	mfr &= ~0x08000000;
+	mtsdr(sdr_mfr, mfr);
+#endif
+
+#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
 	/* Whack the M1 register */
 	mode_reg = 0x0;
 	mode_reg &= ~0x00000038;
@@ -468,7 +504,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
 	if (hw_p->first_init == 0) {
 		miiphy_reset (dev->name, reg);
 
-#if defined(CONFIG_440GX) || defined(CONFIG_440SP)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
 #if defined(CONFIG_CIS8201_PHY)
 		/*
 		 * Cicada 8201 PHY needs to have an extended register whacked
@@ -544,7 +580,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
 			(int) speed, (duplex == HALF) ? "HALF" : "FULL");
 	}
 
-#if defined(CONFIG_440) && !defined(CONFIG_440SP)
+#if defined(CONFIG_440) && !defined(CONFIG_440SP) && !defined(CONFIG_440SPE)
 #if defined(CONFIG_440EP) || defined(CONFIG_440GR)
 	mfsdr(sdr_mfr, reg);
 	if (speed == 100) {
@@ -575,7 +611,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
 #endif /* defined(CONFIG_440) && !defined(CONFIG_440SP) */
 
 	/* set the Mal configuration reg */
-#if defined(CONFIG_440GX) || defined(CONFIG_440SP)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
 	mtdcr (malmcr, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA |
 	       MAL_CR_PLBLT_DEFAULT | MAL_CR_EOPIE | 0x00330000);
 #else
@@ -759,8 +795,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
 
 	/* set speed */
 	if (speed == _1000BASET) {
-#if defined(CONFIG_440SP)
-#define SDR0_PFC1_EM_1000	0x00200000
+#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
 		unsigned long pfc1;
 		mfsdr (sdr_pfc1, pfc1);
 		pfc1 |= SDR0_PFC1_EM_1000;
@@ -787,7 +822,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
 
 	/* set receive	low/high water mark register */
 #if defined(CONFIG_440)
-	/* 440GP has a 64 byte burst length */
+	/* 440s has a 64 byte burst length */
 	out32 (EMAC_RX_HI_LO_WMARK + hw_p->hw_addr, 0x80009000);
 #else
 	/* 405s have a 16 byte burst length */
@@ -895,7 +930,7 @@ static int ppc_4xx_eth_send (struct eth_device *dev, volatile void *ptr,
 
 #if defined (CONFIG_440)
 
-#if defined(CONFIG_440SP)
+#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
 /*
  * Hack: On 440SP all enet irq sources are located on UIC1
  * Needs some cleanup. --sr
@@ -1367,21 +1402,20 @@ int ppc_4xx_eth_initialize (bd_t * bis)
 #endif
 	/* set phy num and mode */
 	bis->bi_phynum[0] = CONFIG_PHY_ADDR;
+	bis->bi_phymode[0] = 0;
+
 #if defined(CONFIG_PHY1_ADDR)
 	bis->bi_phynum[1] = CONFIG_PHY1_ADDR;
+	bis->bi_phymode[1] = 0;
 #endif
 #if defined(CONFIG_440GX)
 	bis->bi_phynum[2] = CONFIG_PHY2_ADDR;
 	bis->bi_phynum[3] = CONFIG_PHY3_ADDR;
-	bis->bi_phymode[0] = 0;
-	bis->bi_phymode[1] = 0;
 	bis->bi_phymode[2] = 2;
 	bis->bi_phymode[3] = 2;
 
-#if defined (CONFIG_440GX)
 	ppc_4xx_eth_setup_bridge(0, bis);
 #endif
-#endif
 
 	for (eth_num = 0; eth_num < LAST_EMAC_NUM; eth_num++) {
 
@@ -1478,9 +1512,15 @@ int ppc_4xx_eth_initialize (bd_t * bis)
 
 		if (0 == virgin) {
 			/* set the MAL IER ??? names may change with new spec ??? */
+#if defined(CONFIG_440SPE)
+			mal_ier =
+				MAL_IER_PT | MAL_IER_PRE | MAL_IER_PWE |
+				MAL_IER_DE | MAL_IER_OTE | MAL_IER_OE | MAL_IER_PE ;
+#else
 			mal_ier =
 				MAL_IER_DE | MAL_IER_NE | MAL_IER_TE |
 				MAL_IER_OPBE | MAL_IER_PLBE;
+#endif
 			mtdcr (malesr, 0xffffffff);	/* clear pending interrupts */
 			mtdcr (maltxdeir, 0xffffffff);	/* clear pending interrupts */
 			mtdcr (malrxdeir, 0xffffffff);	/* clear pending interrupts */
@@ -1510,11 +1550,13 @@ int ppc_4xx_eth_initialize (bd_t * bis)
 #else
 		emac0_dev = dev;
 #endif
+
+#if defined(CONFIG_NET_MULTI)
 #if defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII)
 		miiphy_register (dev->name,
 				 emac4xx_miiphy_read, emac4xx_miiphy_write);
 #endif
-
+#endif
 	}			/* end for each supported device */
 	return (1);
 }
diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c
index d9b5d32c90..71303bcc49 100644
--- a/cpu/ppc4xx/cpu.c
+++ b/cpu/ppc4xx/cpu.c
@@ -82,7 +82,9 @@ int pci_arbiter_enabled(void)
 	return (mfdcr(cpc0_strp1) & CPC0_STRP1_PAE_MASK);
 #endif
 
-#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SP)
+#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || \
+     defined(CONFIG_440GR) || defined(CONFIG_440SP) || \
+     defined(CONFIG_440SPE)
 	unsigned long val;
 
 	mfsdr(sdr_sdstp1, val);
@@ -91,8 +93,8 @@ int pci_arbiter_enabled(void)
 }
 #endif
 
-#if defined(CONFIG_405EP)|| defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
-	defined(CONFIG_440GX) || defined(CONFIG_440SP)
+#if defined(CONFIG_405EP) || defined(CONFIG_440EP) || defined(CONFIG_440GR) ||  \
+     defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
 
 #define I2C_BOOTROM
 
@@ -102,7 +104,9 @@ int i2c_bootrom_enabled(void)
 	return (mfdcr(cpc0_boot) & CPC0_BOOT_SEP);
 #endif
 
-#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SP)
+#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || \
+     defined(CONFIG_440GR) || defined(CONFIG_440SP) || \
+	defined(CONFIG_440SPE)
 	unsigned long val;
 
 	mfsdr(sdr_sdcs, val);
@@ -248,6 +252,14 @@ int checkcpu (void)
 		puts("SP Rev. B");
 		break;
 
+	case PVR_440SPe_RA:
+		puts("SPe Rev. A");
+		break;
+
+	case PVR_440SPe_RB:
+		puts("SPe Rev. B");
+		break;
+
 	default:
 		printf (" UNKNOWN (PVR=%08x)", pvr);
 		break;
diff --git a/cpu/ppc4xx/interrupts.c b/cpu/ppc4xx/interrupts.c
index 3aae4ce8b9..886f405156 100644
--- a/cpu/ppc4xx/interrupts.c
+++ b/cpu/ppc4xx/interrupts.c
@@ -50,18 +50,22 @@ struct	irq_action {
 };
 
 static struct irq_action irq_vecs[32];
+void uic0_interrupt( void * parms); /* UIC0 handler */
 
 #if defined(CONFIG_440)
 static struct irq_action irq_vecs1[32]; /* For UIC1 */
 
 void uic1_interrupt( void * parms); /* UIC1 handler */
 
-#if defined(CONFIG_440GX)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE)
 static struct irq_action irq_vecs2[32]; /* For UIC2 */
-
-void uic0_interrupt( void * parms); /* UIC0 handler */
 void uic2_interrupt( void * parms); /* UIC2 handler */
-#endif /* CONFIG_440GX */
+#endif /* CONFIG_440GX CONFIG_440SPE */
+
+#if defined(CONFIG_440SPE)
+static struct irq_action irq_vecs3[32]; /* For UIC3 */
+void uic3_interrupt( void * parms); /* UIC3 handler */
+#endif /* CONFIG_440SPE */
 
 #endif /* CONFIG_440 */
 
@@ -115,11 +119,16 @@ int interrupt_init_cpu (unsigned *decrementer_count)
 		irq_vecs1[vec].handler = NULL;
 		irq_vecs1[vec].arg = NULL;
 		irq_vecs1[vec].count = 0;
-#if defined(CONFIG_440GX)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE)
 		irq_vecs2[vec].handler = NULL;
 		irq_vecs2[vec].arg = NULL;
 		irq_vecs2[vec].count = 0;
 #endif /* CONFIG_440GX */
+#if defined(CONFIG_440SPE)
+		irq_vecs3[vec].handler = NULL;
+		irq_vecs3[vec].arg = NULL;
+		irq_vecs3[vec].count = 0;
+#endif /* CONFIG_440SPE */
 #endif
 	}
 
@@ -221,6 +230,34 @@ void external_interrupt(struct pt_regs *regs)
 
 } /* external_interrupt CONFIG_440GX */
 
+#elif defined(CONFIG_440SPE)
+void external_interrupt(struct pt_regs *regs)
+{
+	ulong uic_msr;
+
+	/*
+	 * Read masked interrupt status register to determine interrupt source
+	 */
+	/* 440 SPe uses base uic register */
+	uic_msr = mfdcr(uic0msr);
+
+	if ( (UICB0_UIC1CI & uic_msr) || (UICB0_UIC1NCI & uic_msr) )
+		uic1_interrupt(0);
+
+	if ( (UICB0_UIC2CI & uic_msr) || (UICB0_UIC2NCI & uic_msr) )
+		uic2_interrupt(0);
+
+	if ( (UICB0_UIC3CI & uic_msr) || (UICB0_UIC3NCI & uic_msr) )
+		uic3_interrupt(0);
+
+	if (uic_msr & ~(UICB0_ALL))
+		uic0_interrupt(0);
+
+	mtdcr(uic0sr, uic_msr);
+
+	return;
+} /* external_interrupt CONFIG_440SPE */
+
 #else
 
 void external_interrupt(struct pt_regs *regs)
@@ -266,7 +303,7 @@ void external_interrupt(struct pt_regs *regs)
 }
 #endif
 
-#if defined(CONFIG_440GX)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE)
 /* Handler for UIC0 interrupt */
 void uic0_interrupt( void * parms)
 {
@@ -357,8 +394,8 @@ void uic1_interrupt( void * parms)
 }
 #endif /* defined(CONFIG_440) */
 
-#if defined(CONFIG_440GX)
-/* Handler for UIC1 interrupt */
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE)
+/* Handler for UIC2 interrupt */
 void uic2_interrupt( void * parms)
 {
 	ulong uic2_msr;
@@ -384,7 +421,7 @@ void uic2_interrupt( void * parms)
 				(*irq_vecs2[vec].handler)(irq_vecs2[vec].arg);
 			} else {
 				mtdcr(uic2er, mfdcr(uic2er) & ~(0x80000000 >> vec));
-				printf ("Masking bogus interrupt vector (uic1) 0x%x\n", vec);
+				printf ("Masking bogus interrupt vector (uic2) 0x%x\n", vec);
 			}
 
 			/*
@@ -402,6 +439,51 @@ void uic2_interrupt( void * parms)
 }
 #endif /* defined(CONFIG_440GX) */
 
+#if defined(CONFIG_440SPE)
+/* Handler for UIC3 interrupt */
+void uic3_interrupt( void * parms)
+{
+	ulong uic3_msr;
+	ulong msr_shift;
+	int vec;
+
+	/*
+	 * Read masked interrupt status register to determine interrupt source
+	 */
+	uic3_msr = mfdcr(uic3msr);
+	msr_shift = uic3_msr;
+	vec = 0;
+
+	while (msr_shift != 0) {
+		if (msr_shift & 0x80000000) {
+			/*
+			 * Increment irq counter (for debug purpose only)
+			 */
+			irq_vecs3[vec].count++;
+
+			if (irq_vecs3[vec].handler != NULL) {
+				/* call isr */
+				(*irq_vecs3[vec].handler)(irq_vecs3[vec].arg);
+			} else {
+				mtdcr(uic3er, mfdcr(uic3er) & ~(0x80000000 >> vec));
+				printf ("Masking bogus interrupt vector (uic3) 0x%x\n", vec);
+			}
+
+			/*
+			 * After servicing the interrupt, we have to remove the status indicator.
+			 */
+			mtdcr(uic3sr, (0x80000000 >> vec));
+		}
+
+		/*
+		 * Shift msr to next position and increment vector
+		 */
+		msr_shift <<= 1;
+		vec++;
+	}
+}
+#endif /* defined(CONFIG_440SPE) */
+
 /****************************************************************************/
 
 /*
@@ -414,7 +496,7 @@ void irq_install_handler (int vec, interrupt_handler_t * handler, void *arg)
 	int i = vec;
 
 #if defined(CONFIG_440)
-#if defined(CONFIG_440GX)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE)
 	if ((vec > 31) && (vec < 64)) {
 		i = vec - 32;
 		irqa = irq_vecs1;
@@ -441,7 +523,7 @@ void irq_install_handler (int vec, interrupt_handler_t * handler, void *arg)
 	irqa[i].arg = arg;
 
 #if defined(CONFIG_440)
-#if defined(CONFIG_440GX)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE)
 	if ((vec > 31) && (vec < 64))
 		mtdcr (uic1er, mfdcr (uic1er) | (0x80000000 >> i));
 	else if (vec > 63)
@@ -464,7 +546,7 @@ void irq_free_handler (int vec)
 	int i = vec;
 
 #if defined(CONFIG_440)
-#if defined(CONFIG_440GX)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE)
 	if ((vec > 31) && (vec < 64)) {
 		irqa = irq_vecs1;
 		i = vec - 32;
@@ -485,7 +567,7 @@ void irq_free_handler (int vec)
 #endif
 
 #if defined(CONFIG_440)
-#if defined(CONFIG_440GX)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE)
 	if ((vec > 31) && (vec < 64))
 		mtdcr (uic1er, mfdcr (uic1er) & ~(0x80000000 >> i));
 	else if (vec > 63)
@@ -553,7 +635,7 @@ do_irqinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	printf("\n");
 #endif
 
-#if defined(CONFIG_440GX)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE)
 	printf ("\nUIC 2\n");
 	printf ("Nr  Routine   Arg       Count\n");
 
@@ -566,6 +648,19 @@ do_irqinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	printf("\n");
 #endif
 
+#if defined(CONFIG_440SPE)
+	printf ("\nUIC 3\n");
+	printf ("Nr  Routine   Arg       Count\n");
+
+	for (vec=0; vec<32; vec++) {
+		if (irq_vecs3[vec].handler != NULL)
+			printf ("%02d  %08lx  %08lx  %d\n",
+					vec+63, (ulong)irq_vecs3[vec].handler,
+					(ulong)irq_vecs3[vec].arg, irq_vecs3[vec].count);
+	}
+	printf("\n");
+#endif
+
 	return 0;
 }
 #endif  /* CONFIG_COMMANDS & CFG_CMD_IRQ */
diff --git a/cpu/ppc4xx/miiphy.c b/cpu/ppc4xx/miiphy.c
index f26f2a203a..aa580ed48f 100644
--- a/cpu/ppc4xx/miiphy.c
+++ b/cpu/ppc4xx/miiphy.c
@@ -50,7 +50,7 @@
 #include <405_mal.h>
 #include <miiphy.h>
 
-
+#undef ET_DEBUG
 /***********************************************************/
 /* Dump out to the screen PHY regs			   */
 /***********************************************************/
@@ -90,6 +90,10 @@ int phy_setup_aneg (char *devname, unsigned char addr)
 		PHY_ANLPAR_10);
 	miiphy_write (devname, addr, PHY_ANAR, adv);
 
+	miiphy_read (devname, addr, PHY_1000BTCR, &adv);
+	adv |= (0x0300);
+	miiphy_write (devname, addr, PHY_1000BTCR, adv);
+
 	/* Start/Restart aneg */
 	miiphy_read (devname, addr, PHY_BMCR, &ctl);
 	ctl |= (PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
@@ -104,7 +108,7 @@ int phy_setup_aneg (char *devname, unsigned char addr)
 /***********************************************************/
 unsigned int miiphy_getemac_offset (void)
 {
-#if (defined(CONFIG_440) && !defined(CONFIG_440SP)) && defined(CONFIG_NET_MULTI)
+#if (defined(CONFIG_440) && !defined(CONFIG_440SP) && !defined(CONFIG_440SPE)) && defined(CONFIG_NET_MULTI)
 	unsigned long zmii;
 	unsigned long eoffset;
 
@@ -155,10 +159,12 @@ int emac4xx_miiphy_read (char *devname, unsigned char addr,
 	i = 0;
 
 	/* see if it is ready for  sec */
-	while ((in32 (EMAC_STACR + emac_reg) & EMAC_STACR_OC) == 0) {
+	while ((in32 (EMAC_STACR + emac_reg) & EMAC_STACR_OC) == EMAC_STACR_OC_MASK) {
 		udelay (7);
 		if (i > 5) {
-#if 0
+#ifdef ET_DEBUG
+			sta_reg = in32 (EMAC_STACR + emac_reg);
+			printf ("read : EMAC_STACR=0x%0x\n", sta_reg);	/* test-only */
 			printf ("read err 1\n");
 #endif
 			return -1;
@@ -167,31 +173,41 @@ int emac4xx_miiphy_read (char *devname, unsigned char addr,
 	}
 	sta_reg = reg;		/* reg address */
 	/* set clock (50Mhz) and read flags */
-#if defined(CONFIG_440GX)
-	sta_reg |= EMAC_STACR_READ;
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE)
+#if defined(CONFIG_IBM_EMAC4_V4)      /* EMAC4 V4 changed bit setting */
+		sta_reg = (sta_reg & ~EMAC_STACR_OP_MASK) | EMAC_STACR_READ;
+#else
+		sta_reg |= EMAC_STACR_READ;
+#endif
 #else
 	sta_reg = (sta_reg | EMAC_STACR_READ) & ~EMAC_STACR_CLK_100MHZ;
 #endif
 
-#if defined(CONFIG_PHY_CLK_FREQ) && !defined(CONFIG_440GX)
+#if defined(CONFIG_PHY_CLK_FREQ) && !defined(CONFIG_440GX) && !defined(CONFIG__440SP) && !defined(CONFIG__440SPE)
 	sta_reg = sta_reg | CONFIG_PHY_CLK_FREQ;
 #endif
 	sta_reg = sta_reg | (addr << 5);	/* Phy address */
-
+	sta_reg = sta_reg | EMAC_STACR_OC_MASK;	/* new IBM emac v4 */
 	out32 (EMAC_STACR + emac_reg, sta_reg);
-#if 0				/* test-only */
+#ifdef ET_DEBUG
 	printf ("a2: write: EMAC_STACR=0x%0x\n", sta_reg);	/* test-only */
 #endif
 
 	sta_reg = in32 (EMAC_STACR + emac_reg);
+#ifdef ET_DEBUG
+		printf ("a21: read : EMAC_STACR=0x%0x\n", sta_reg);	/* test-only */
+#endif
 	i = 0;
-	while ((sta_reg & EMAC_STACR_OC) == 0) {
+	while ((sta_reg & EMAC_STACR_OC) == EMAC_STACR_OC_MASK) {
 		udelay (7);
 		if (i > 5) {
 			return -1;
 		}
 		i++;
 		sta_reg = in32 (EMAC_STACR + emac_reg);
+#ifdef ET_DEBUG
+		printf ("a22: read : EMAC_STACR=0x%0x\n", sta_reg);	/* test-only */
+#endif
 	}
 	if ((sta_reg & EMAC_STACR_PHYE) != 0) {
 		return -1;
@@ -219,7 +235,7 @@ int emac4xx_miiphy_write (char *devname, unsigned char addr,
 	/* see if it is ready for 1000 nsec */
 	i = 0;
 
-	while ((in32 (EMAC_STACR + emac_reg) & EMAC_STACR_OC) == 0) {
+	while ((in32 (EMAC_STACR + emac_reg) & EMAC_STACR_OC) == EMAC_STACR_OC_MASK) {
 		if (i > 5)
 			return -1;
 		udelay (7);
@@ -228,16 +244,21 @@ int emac4xx_miiphy_write (char *devname, unsigned char addr,
 	sta_reg = 0;
 	sta_reg = reg;		/* reg address */
 	/* set clock (50Mhz) and read flags */
-#if defined(CONFIG_440GX)
-	sta_reg |= EMAC_STACR_WRITE;
+#if defined(CONFIG_440GX) || defined(CONFIG_440SPE)
+#if defined(CONFIG_IBM_EMAC4_V4)      /* EMAC4 V4 changed bit setting */
+		sta_reg = (sta_reg & ~EMAC_STACR_OP_MASK) | EMAC_STACR_WRITE;
+#else
+		sta_reg |= EMAC_STACR_WRITE;
+#endif
 #else
 	sta_reg = (sta_reg | EMAC_STACR_WRITE) & ~EMAC_STACR_CLK_100MHZ;
 #endif
 
-#if defined(CONFIG_PHY_CLK_FREQ) && !defined(CONFIG_440GX)
+#if defined(CONFIG_PHY_CLK_FREQ) && !defined(CONFIG_440GX) && !defined(CONFIG__440SP) && !defined(CONFIG__440SPE)
 	sta_reg = sta_reg | CONFIG_PHY_CLK_FREQ;	/* Set clock frequency (PLB freq. dependend) */
 #endif
-	sta_reg = sta_reg | ((unsigned long) addr << 5);	/* Phy address */
+	sta_reg = sta_reg | ((unsigned long) addr << 5);/* Phy address */
+	sta_reg = sta_reg | EMAC_STACR_OC_MASK;		/* new IBM emac v4 */
 	memcpy (&sta_reg, &value, 2);	/* put in data */
 
 	out32 (EMAC_STACR + emac_reg, sta_reg);
@@ -245,12 +266,18 @@ int emac4xx_miiphy_write (char *devname, unsigned char addr,
 	/* wait for completion */
 	i = 0;
 	sta_reg = in32 (EMAC_STACR + emac_reg);
-	while ((sta_reg & EMAC_STACR_OC) == 0) {
+#ifdef ET_DEBUG
+		printf ("a31: read : EMAC_STACR=0x%0x\n", sta_reg);	/* test-only */
+#endif
+	while ((sta_reg & EMAC_STACR_OC) == EMAC_STACR_OC_MASK) {
 		udelay (7);
 		if (i > 5)
 			return -1;
 		i++;
 		sta_reg = in32 (EMAC_STACR + emac_reg);
+#ifdef ET_DEBUG
+		printf ("a32: read : EMAC_STACR=0x%0x\n", sta_reg);	/* test-only */
+#endif
 	}
 
 	if ((sta_reg & EMAC_STACR_PHYE) != 0)
diff --git a/cpu/ppc4xx/sdram.c b/cpu/ppc4xx/sdram.c
index e31d59d80e..faeea5c91e 100644
--- a/cpu/ppc4xx/sdram.c
+++ b/cpu/ppc4xx/sdram.c
@@ -379,7 +379,7 @@ long int initdram(int board_type)
 		/*
 		 * Enable the controller, then wait for DCEN to complete
 		 */
-		mtsdram(mem_cfg0, 0x86000000);	/* DCEN=1, PMUD=1, 64-bit	*/
+		mtsdram(mem_cfg0, 0x82000000);	/* DCEN=1, PMUD=0, 64-bit	*/
 		udelay(10000);
 
 		if (get_ram_size(0, mb0cf[i].size) == mb0cf[i].size) {
diff --git a/cpu/ppc4xx/serial.c b/cpu/ppc4xx/serial.c
index 83c947998e..ad3ca6e819 100644
--- a/cpu/ppc4xx/serial.c
+++ b/cpu/ppc4xx/serial.c
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000
+ * (C) Copyright 2000-2006
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -275,11 +275,11 @@ int serial_tstc ()
 #define UART1_BASE  CFG_PERIPHERAL_BASE + 0x00000300
 #endif
 
-#if defined(CONFIG_440SP)
+#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
 #define UART2_BASE  CFG_PERIPHERAL_BASE + 0x00000600
 #endif
 
-#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SP)
+#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
 #define CR0_MASK        0xdfffffff
 #define CR0_EXTCLK_ENA  0x00800000
 #define CR0_UDIV_POS    0
@@ -309,14 +309,18 @@ int serial_tstc ()
 #if defined(CONFIG_UART1_CONSOLE)
 #define ACTING_UART0_BASE	UART1_BASE
 #define ACTING_UART1_BASE	UART0_BASE
-#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SP)
+#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || \
+	defined(CONFIG_440GR) || defined(CONFIG_440SP) || \
+	defined(CONFIG_440SPE)
 #define UART0_SDR           sdr_uart1
 #define UART1_SDR           sdr_uart0
 #endif /* CONFIG_440GX */
 #else
 #define ACTING_UART0_BASE	UART0_BASE
 #define ACTING_UART1_BASE	UART1_BASE
-#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SP)
+#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || \
+	defined(CONFIG_440GR) || defined(CONFIG_440SP) || \
+	defined(CONFIG_440SPE)
 #define UART0_SDR           sdr_uart0
 #define UART1_SDR           sdr_uart1
 #endif /* CONFIG_440GX */
@@ -437,7 +441,8 @@ int serial_init(void)
 	unsigned long tmp;
 #endif
 
-#if defined(CONFIG_440GX) || defined(CONFIG_440SP)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || \
+	defined(CONFIG_440SPE)
 #if defined(CONFIG_SERIAL_MULTI)
 	if (UART0_BASE == dev_base) {
 		mfsdr(UART0_SDR,reg);
@@ -466,7 +471,9 @@ int serial_init(void)
 	serial_divs (gd->baudrate, &udiv, &bdiv);
 #endif
 
-#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SP)
+#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || \
+	defined(CONFIG_440GR) || defined(CONFIG_440SP) || \
+	defined(CONFIG_440SPE)
 	reg |= udiv << CR0_UDIV_POS;	/* set the UART divisor */
 #if defined(CONFIG_SERIAL_MULTI)
 	if (UART0_BASE == dev_base) {
@@ -607,8 +614,28 @@ void serial_setbrg (void)
 #else
 	udiv = ((mfdcr (cntrl0) & 0x3e) >> 1) + 1;
 #endif /* CONFIG_405EP */
+
+#if !defined(CFG_EXT_SERIAL_CLOCK) && \
+	( defined(CONFIG_440GX) || defined(CONFIG_440EP) || \
+	  defined(CONFIG_440GR) || defined(CONFIG_440SP) || \
+	  defined(CONFIG_440SPE) )
+	serial_divs (gd->baudrate, &udiv, &bdiv);
+	tmp = udiv << CR0_UDIV_POS;		/* set the UART divisor */
+#if defined(CONFIG_SERIAL_MULTI)
+	if (UART0_BASE == dev_base) {
+		mtsdr (UART0_SDR, tmp);
+	} else {
+		mtsdr (UART1_SDR, tmp);
+	}
+#else
+	mtsdr (UART0_SDR, tmp);
+#endif
+
+#else
+
 	tmp = gd->baudrate * udiv * 16;
 	bdiv = (clk + tmp / 2) / tmp;
+#endif /* !defined(CFG_EXT_SERIAL_CLOCK) && (...) */
 
 #if defined(CONFIG_SERIAL_MULTI)
 	out8 (dev_base + UART_LCR, 0x80);	/* set DLAB bit */
diff --git a/cpu/ppc4xx/spd_sdram.c b/cpu/ppc4xx/spd_sdram.c
index ebd5f3998f..c24456bea8 100644
--- a/cpu/ppc4xx/spd_sdram.c
+++ b/cpu/ppc4xx/spd_sdram.c
@@ -745,7 +745,7 @@ long int spd_sdram(void) {
 	 */
 	check_volt_type(dimm_populated, iic0_dimm_addr, num_dimm_banks);
 
-#if defined(CONFIG_440GX)
+#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SP)
 	/*
 	 * Soft-reset SDRAM controller.
 	 */
@@ -1007,9 +1007,9 @@ void program_cfg0(unsigned long* dimm_populated,
 	}
 
 	/*
-	 * program Page Management Unit
+	 * program Page Management Unit (0 == enabled)
 	 */
-	cfg0 |= SDRAM_CFG0_PMUD;
+	cfg0 &= ~SDRAM_CFG0_PMUD;
 
 	/*
 	 * program Memory Controller Options 0
diff --git a/cpu/ppc4xx/speed.c b/cpu/ppc4xx/speed.c
index 02b43832f2..e552c03473 100644
--- a/cpu/ppc4xx/speed.c
+++ b/cpu/ppc4xx/speed.c
@@ -29,7 +29,11 @@
 DECLARE_GLOBAL_DATA_PTR;
 
 #define ONE_BILLION        1000000000
-
+#ifdef DEBUG
+#define DEBUGF(fmt,args...) printf(fmt ,##args)
+#else
+#define DEBUGF(fmt,args...)
+#endif
 
 #if defined(CONFIG_405GP) || defined(CONFIG_405CR)
 
@@ -283,7 +287,7 @@ ulong get_PCI_freq (void)
 	return sys_info.freqPCI;
 }
 
-#elif !defined(CONFIG_440GX) && !defined(CONFIG_440SP)
+#elif !defined(CONFIG_440GX) && !defined(CONFIG_440SP) && !defined(CONFIG_440SPE)
 void get_sys_info (sys_info_t * sysInfo)
 {
 	unsigned long strp0;
@@ -326,6 +330,26 @@ void get_sys_info (sys_info_t * sysInfo)
 	unsigned long m;
 	unsigned long prbdv0;
 
+#if defined(CONFIG_440SPE)
+	unsigned long sys_freq;
+	unsigned long sys_per=0;
+	unsigned long msr;
+	unsigned long pci_clock_per;
+	unsigned long sdr_ddrpll;
+
+	/*-------------------------------------------------------------------------+
+	 | Get the system clock period.
+	 +-------------------------------------------------------------------------*/
+	sys_per = determine_sysper();
+
+	msr = (mfmsr () & ~(MSR_EE));	/* disable interrupts */
+
+	/*-------------------------------------------------------------------------+
+	 | Calculate the system clock speed from the period.
+	 +-------------------------------------------------------------------------*/
+	sys_freq=(ONE_BILLION/sys_per)*1000;
+#endif
+
 	/* Extract configured divisors */
 	mfsdr( sdr_sdstp0,strp0 );
 	mfsdr( sdr_sdstp1,strp1 );
@@ -360,12 +384,238 @@ void get_sys_info (sys_info_t * sysInfo)
 		m = sysInfo->pllExtBusDiv * sysInfo->pllOpbDiv * sysInfo->pllFwdDivB;
 
 	/* Now calculate the individual clocks */
+#if defined(CONFIG_440SPE)
+	sysInfo->freqVCOMhz = (m * sys_freq) ;
+#else
 	sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m>>1);
+#endif
 	sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
 	sysInfo->freqPLB = sysInfo->freqVCOMhz/sysInfo->pllFwdDivB/prbdv0;
 	sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
 	sysInfo->freqEPB = sysInfo->freqOPB/sysInfo->pllExtBusDiv;
 
+#if defined(CONFIG_440SPE)
+	/* Determine PCI Clock Period */
+	pci_clock_per = determine_pci_clock_per();
+	sysInfo->freqPCI = (ONE_BILLION/pci_clock_per) * 1000;
+	mfsdr(sdr_ddr0, sdr_ddrpll);
+	sysInfo->freqDDR = ((sysInfo->freqPLB) * SDR0_DDR0_DDRM_DECODE(sdr_ddrpll));
+#endif
+
+
+}
+
+#endif
+
+#if defined(CONFIG_440SPE)
+unsigned long determine_sysper(void)
+{
+	unsigned int fpga_clocking_reg;
+	unsigned int master_clock_selection;
+	unsigned long master_clock_per = 0;
+	unsigned long fb_div_selection;
+	unsigned int vco_div_reg_value;
+	unsigned long vco_div_selection;
+	unsigned long sys_per = 0;
+	int extClkVal;
+
+	/*-------------------------------------------------------------------------+
+	 | Read FPGA reg 0 and reg 1 to get FPGA reg information
+	 +-------------------------------------------------------------------------*/
+	fpga_clocking_reg = in16(FPGA_REG16);
+
+
+	/* Determine Master Clock Source Selection */
+	master_clock_selection = fpga_clocking_reg & FPGA_REG16_MASTER_CLK_MASK;
+
+	switch(master_clock_selection) {
+		case FPGA_REG16_MASTER_CLK_66_66:
+			master_clock_per = PERIOD_66_66MHZ;
+			break;
+		case FPGA_REG16_MASTER_CLK_50:
+			master_clock_per = PERIOD_50_00MHZ;
+			break;
+		case FPGA_REG16_MASTER_CLK_33_33:
+			master_clock_per = PERIOD_33_33MHZ;
+			break;
+		case FPGA_REG16_MASTER_CLK_25:
+			master_clock_per = PERIOD_25_00MHZ;
+			break;
+		case FPGA_REG16_MASTER_CLK_EXT:
+			if ((extClkVal==EXTCLK_33_33)
+					&& (extClkVal==EXTCLK_50)
+					&& (extClkVal==EXTCLK_66_66)
+					&& (extClkVal==EXTCLK_83)) {
+				/* calculate master clock period from external clock value */
+				master_clock_per=(ONE_BILLION/extClkVal) * 1000;
+			} else {
+				/* Unsupported */
+				DEBUGF ("%s[%d] *** master clock selection failed ***\n", __FUNCTION__,__LINE__);
+				hang();
+			}
+			break;
+		default:
+			/* Unsupported */
+			DEBUGF ("%s[%d] *** master clock selection failed ***\n", __FUNCTION__,__LINE__);
+			hang();
+			break;
+	}
+
+	/* Determine FB divisors values */
+	if ((fpga_clocking_reg & FPGA_REG16_FB1_DIV_MASK) == FPGA_REG16_FB1_DIV_LOW) {
+		if ((fpga_clocking_reg & FPGA_REG16_FB2_DIV_MASK) == FPGA_REG16_FB2_DIV_LOW)
+			fb_div_selection = FPGA_FB_DIV_6;
+		else
+			fb_div_selection = FPGA_FB_DIV_12;
+	} else {
+		if ((fpga_clocking_reg & FPGA_REG16_FB2_DIV_MASK) == FPGA_REG16_FB2_DIV_LOW)
+			fb_div_selection = FPGA_FB_DIV_10;
+		else
+			fb_div_selection = FPGA_FB_DIV_20;
+	}
+
+	/* Determine VCO divisors values */
+	vco_div_reg_value = fpga_clocking_reg & FPGA_REG16_VCO_DIV_MASK;
+
+	switch(vco_div_reg_value) {
+		case FPGA_REG16_VCO_DIV_4:
+			vco_div_selection = FPGA_VCO_DIV_4;
+			break;
+		case FPGA_REG16_VCO_DIV_6:
+			vco_div_selection = FPGA_VCO_DIV_6;
+			break;
+		case FPGA_REG16_VCO_DIV_8:
+			vco_div_selection = FPGA_VCO_DIV_8;
+			break;
+		case FPGA_REG16_VCO_DIV_10:
+		default:
+			vco_div_selection = FPGA_VCO_DIV_10;
+			break;
+	}
+
+	if (master_clock_selection == FPGA_REG16_MASTER_CLK_EXT) {
+		switch(master_clock_per) {
+			case PERIOD_25_00MHZ:
+				if (fb_div_selection == FPGA_FB_DIV_12) {
+					if (vco_div_selection == FPGA_VCO_DIV_4)
+						sys_per = PERIOD_75_00MHZ;
+					if (vco_div_selection == FPGA_VCO_DIV_6)
+						sys_per = PERIOD_50_00MHZ;
+				}
+				break;
+			case PERIOD_33_33MHZ:
+				if (fb_div_selection == FPGA_FB_DIV_6) {
+					if (vco_div_selection == FPGA_VCO_DIV_4)
+						sys_per = PERIOD_50_00MHZ;
+					if (vco_div_selection == FPGA_VCO_DIV_6)
+						sys_per = PERIOD_33_33MHZ;
+				}
+				if (fb_div_selection == FPGA_FB_DIV_10) {
+					if (vco_div_selection == FPGA_VCO_DIV_4)
+						sys_per = PERIOD_83_33MHZ;
+					if (vco_div_selection == FPGA_VCO_DIV_10)
+						sys_per = PERIOD_33_33MHZ;
+				}
+				if (fb_div_selection == FPGA_FB_DIV_12) {
+					if (vco_div_selection == FPGA_VCO_DIV_4)
+						sys_per = PERIOD_100_00MHZ;
+					if (vco_div_selection == FPGA_VCO_DIV_6)
+						sys_per = PERIOD_66_66MHZ;
+					if (vco_div_selection == FPGA_VCO_DIV_8)
+						sys_per = PERIOD_50_00MHZ;
+				}
+				break;
+			case PERIOD_50_00MHZ:
+				if (fb_div_selection == FPGA_FB_DIV_6) {
+					if (vco_div_selection == FPGA_VCO_DIV_4)
+						sys_per = PERIOD_75_00MHZ;
+					if (vco_div_selection == FPGA_VCO_DIV_6)
+						sys_per = PERIOD_50_00MHZ;
+				}
+				if (fb_div_selection == FPGA_FB_DIV_10) {
+					if (vco_div_selection == FPGA_VCO_DIV_6)
+						sys_per = PERIOD_83_33MHZ;
+					if (vco_div_selection == FPGA_VCO_DIV_10)
+						sys_per = PERIOD_50_00MHZ;
+				}
+				if (fb_div_selection == FPGA_FB_DIV_12) {
+					if (vco_div_selection == FPGA_VCO_DIV_6)
+						sys_per = PERIOD_100_00MHZ;
+					if (vco_div_selection == FPGA_VCO_DIV_8)
+						sys_per = PERIOD_75_00MHZ;
+				}
+				break;
+			case PERIOD_66_66MHZ:
+				if (fb_div_selection == FPGA_FB_DIV_6) {
+					if (vco_div_selection == FPGA_VCO_DIV_4)
+						sys_per = PERIOD_100_00MHZ;
+					if (vco_div_selection == FPGA_VCO_DIV_6)
+						sys_per = PERIOD_66_66MHZ;
+					if (vco_div_selection == FPGA_VCO_DIV_8)
+						sys_per = PERIOD_50_00MHZ;
+				}
+				if (fb_div_selection == FPGA_FB_DIV_10) {
+					if (vco_div_selection == FPGA_VCO_DIV_8)
+						sys_per = PERIOD_83_33MHZ;
+					if (vco_div_selection == FPGA_VCO_DIV_10)
+						sys_per = PERIOD_66_66MHZ;
+				}
+				if (fb_div_selection == FPGA_FB_DIV_12) {
+					if (vco_div_selection == FPGA_VCO_DIV_8)
+						sys_per = PERIOD_100_00MHZ;
+				}
+				break;
+			default:
+				break;
+		}
+
+		if (sys_per == 0) {
+			/* Other combinations are not supported */
+			DEBUGF ("%s[%d] *** sys period compute failed ***\n", __FUNCTION__,__LINE__);
+			hang();
+		}
+	} else {
+		/* calcul system clock without cheking */
+		/* if engineering option clock no check is selected */
+		/* sys_per = master_clock_per * vco_div_selection / fb_div_selection */
+		sys_per = (master_clock_per/fb_div_selection) * vco_div_selection;
+	}
+
+	return(sys_per);
+
+}
+
+/*-------------------------------------------------------------------------+
+| determine_pci_clock_per.
++-------------------------------------------------------------------------*/
+unsigned long determine_pci_clock_per(void)
+{
+	unsigned long pci_clock_selection,  pci_period;
+
+	/*-------------------------------------------------------------------------+
+	 | Read FPGA reg 6 to get PCI 0 FPGA reg information
+	 +-------------------------------------------------------------------------*/
+	pci_clock_selection = in16(FPGA_REG16);	/* was reg6 averifier */
+
+
+	pci_clock_selection = pci_clock_selection & FPGA_REG16_PCI0_CLK_MASK;
+
+	switch (pci_clock_selection) {
+		case FPGA_REG16_PCI0_CLK_133_33:
+			pci_period = PERIOD_133_33MHZ;
+			break;
+		case FPGA_REG16_PCI0_CLK_100:
+			pci_period = PERIOD_100_00MHZ;
+			break;
+		case FPGA_REG16_PCI0_CLK_66_66:
+			pci_period = PERIOD_66_66MHZ;
+			break;
+		default:
+			pci_period = PERIOD_33_33MHZ;;
+			break;
+	}
+
+	return(pci_period);
 }
 #endif
 
diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S
index 647088f721..699fa7fd75 100644
--- a/cpu/ppc4xx/start.S
+++ b/cpu/ppc4xx/start.S
@@ -155,6 +155,11 @@
 
 /**************************************************************************/
 _start_440:
+	/*----------------------------------------------------------------+
+	| Core bug fix.  Clear the esr
+	+-----------------------------------------------------------------*/
+	li	r0,0
+	mtspr	esr,r0
 	/*----------------------------------------------------------------*/
 	/* Clear and set up some registers. */
 	/*----------------------------------------------------------------*/
@@ -166,7 +171,7 @@ _start_440:
 	mtspr	srr1,r0
 	mtspr	csrr0,r0
 	mtspr	csrr1,r0
-#if defined(CONFIG_440GX) || defined(CONFIG_440SP) /* NOTE: 440GX adds machine check status regs */
+#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)  /* NOTE: 440GX adds machine check status regs */
 	mtspr	mcsrr0,r0
 	mtspr	mcsrr1,r0
 	mfspr	r1, mcsr
@@ -200,6 +205,31 @@ _start_440:
 	ori	r1,r1,0x6000	/* cache touch */
 	mtspr	ccr0,r1
 
+#if defined (CONFIG_440SPE)
+	/*----------------------------------------------------------------+
+	| Initialize Core Configuration Reg1.
+	| a. ICDPEI: Record even parity. Normal operation.
+	| b. ICTPEI: Record even parity. Normal operation.
+	| c. DCTPEI: Record even parity. Normal operation.
+	| d. DCDPEI: Record even parity. Normal operation.
+	| e. DCUPEI: Record even parity. Normal operation.
+	| f. DCMPEI: Record even parity. Normal operation.
+	| g. FCOM:   Normal operation
+	| h. MMUPEI: Record even parity. Normal operation.
+	| i. FFF:    Flush only as much data as necessary.
+	| j. TCS:    Timebase increments from CPU clock.
+	+-----------------------------------------------------------------*/
+	li	r0,0
+	mtspr	ccr1, r0
+
+	/*----------------------------------------------------------------+
+	| Reset the timebase.
+	| The previous write to CCR1 sets the timebase source.
+	+-----------------------------------------------------------------*/
+	mtspr	tbl, r0
+	mtspr	tbu, r0
+#endif
+
 	/*----------------------------------------------------------------*/
 	/* Setup interrupt vectors */
 	/*----------------------------------------------------------------*/
@@ -261,15 +291,26 @@ _start_440:
 	mtspr	ivlim,r1
 	mtspr	dvlim,r1
 
+	/*----------------------------------------------------------------+
+	|Initialize MMUCR[STID] = 0.
+	+-----------------------------------------------------------------*/
+	mfspr	r0,mmucr
+	addis	r1,0,0xFFFF
+	ori	r1,r1,0xFF00
+	and	r0,r0,r1
+	mtspr	mmucr,r0
+
 	/*----------------------------------------------------------------*/
 	/* Clear all TLB entries -- TID = 0, TS = 0 */
 	/*----------------------------------------------------------------*/
-	mtspr	mmucr,r0
+	addis	r0,0,0x0000
 	li	r1,0x003f	/* 64 TLB entries */
 	mtctr	r1
-0:	tlbwe	r0,r1,0x0000	/* Invalidate all entries (V=0)*/
+rsttlb:	tlbwe	r0,r1,0x0000	/* Invalidate all entries (V=0)*/
+	tlbwe	r0,r1,0x0001
+	tlbwe	r0,r1,0x0002
 	subi	r1,r1,0x0001
-	bdnz	0b
+	bdnz	rsttlb
 
 	/*----------------------------------------------------------------*/
 	/* TLB entry setup -- step thru tlbtab */
@@ -377,7 +418,7 @@ _start:
 	addi	r3,r3,32
 	bdnz	..d_ag
 #else
-#if defined (CONFIG_440GX) || defined(CONFIG_440SP)
+#if defined (CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
 	mtdcr	l2_cache_cfg,r0		/* Ensure L2 Cache is off */
 #endif
 	mtdcr	isram0_sb1cr,r0		/* Disable bank 1 */
@@ -404,6 +445,19 @@ _start:
 	lis	r1, 0x8003
 	ori	r1,r1, 0x0980		/* fourth 64k */
 	mtdcr	isram0_sb3cr,r1
+#elif defined(CONFIG_440SPE)
+	lis	r1,0x0000		/* BAS = 0000_0000 */
+	ori	r1,r1,0x0984		/* first 64k */
+	mtdcr	isram0_sb0cr,r1
+	lis	r1,0x0001
+	ori	r1,r1,0x0984		/* second 64k */
+	mtdcr	isram0_sb1cr,r1
+	lis	r1, 0x0002
+	ori	r1,r1, 0x0984		/* third 64k */
+	mtdcr	isram0_sb2cr,r1
+	lis	r1, 0x0003
+	ori	r1,r1, 0x0984		/* fourth 64k */
+	mtdcr	isram0_sb3cr,r1
 #else
 	ori	r1,r1,0x0380		/* 8k rw */
 	mtdcr	isram0_sb0cr,r1
@@ -1197,7 +1251,7 @@ ppcSync:
  */
 	.globl	relocate_code
 relocate_code:
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SPE)
 	/*
 	 * On some 440er platforms the cache is enabled in the first TLB (Boot-CS)
 	 * to speed up the boot process. Now this cache needs to be disabled.
@@ -1412,7 +1466,7 @@ trap_init:
 	cmplw	0, r7, r8
 	blt	4b
 
-#if !defined(CONFIG_440_GX)
+#if !defined(CONFIG_440GX) && !defined(CONFIG_440SPE)
 	addi	r7,r0,0x1000		/* set ME bit (Machine Exceptions) */
 	oris	r7,r7,0x0002		/* set CE bit (Critical Exceptions) */
 	mtmsr	r7			/* change MSR */
diff --git a/cpu/ppc4xx/vecnum.h b/cpu/ppc4xx/vecnum.h
index cbfe41db9c..93cef026a3 100644
--- a/cpu/ppc4xx/vecnum.h
+++ b/cpu/ppc4xx/vecnum.h
@@ -31,7 +31,48 @@
 #ifndef _VECNUMS_H_
 #define _VECNUMS_H_
 
-#if defined(CONFIG_440SP)
+#if defined(CONFIG_440SPE)
+/* UIC 0 */
+#define VECNUM_U0           0           /* UART0                        */
+#define VECNUM_U1           1           /* UART1                        */
+#define VECNUM_IIC0         2           /* IIC0                         */
+#define VECNUM_IIC1         3           /* IIC1                         */
+#define VECNUM_PIM          4           /* PCI inbound message          */
+#define VECNUM_PCRW         5           /* PCI command reg write        */
+#define VECNUM_PPM          6           /* PCI power management         */
+#define VECNUM_MSI0         7           /* PCI MSI level 0              */
+#define VECNUM_MSI1         8           /* PCI MSI level 0              */
+#define VECNUM_MSI2         9           /* PCI MSI level 0              */
+#define VECNUM_D0           12          /* DMA channel 0                */
+#define VECNUM_D1           13          /* DMA channel 1                */
+#define VECNUM_D2           14          /* DMA channel 2                */
+#define VECNUM_D3           15          /* DMA channel 3                */
+#define VECNUM_UIC1NC       30          /* UIC1 non-critical interrupt  */
+#define VECNUM_UIC1C        31          /* UIC1 critical interrupt      */
+
+/* UIC 1 */
+#define VECNUM_MS           (32 + 1 )   /* MAL SERR                     */
+#define VECNUM_TXDE         (32 + 2 )   /* MAL TXDE                     */
+#define VECNUM_RXDE         (32 + 3 )   /* MAL RXDE                     */
+#define VECNUM_MTE          (32 + 6 )   /* MAL Tx EOB                   */
+#define VECNUM_MRE          (32 + 7 )   /* MAL Rx EOB                   */
+#define VECNUM_CT0          (32 + 12 )  /* GPT compare timer 0          */
+#define VECNUM_CT1          (32 + 13 )  /* GPT compare timer 1          */
+#define VECNUM_CT2          (32 + 14 )  /* GPT compare timer 2          */
+#define VECNUM_CT3          (32 + 15 )  /* GPT compare timer 3          */
+#define VECNUM_CT4          (32 + 16 )  /* GPT compare timer 4          */
+#define VECNUM_ETH0         (32 + 28)   /* Ethernet interrupt status    */
+#define VECNUM_EWU0         (32 + 29)   /* Emac  wakeup                 */
+
+/* UIC 2 */
+#define VECNUM_EIR5         (62 + 24)   /* External interrupt 5         */
+#define VECNUM_EIR4         (62 + 25)   /* External interrupt 4         */
+#define VECNUM_EIR3         (62 + 26)   /* External interrupt 3         */
+#define VECNUM_EIR2         (62 + 27)   /* External interrupt 2         */
+#define VECNUM_EIR1         (62 + 28)   /* External interrupt 1         */
+#define VECNUM_EIR0         (62 + 29)   /* External interrupt 0         */
+
+#elif defined(CONFIG_440SP)
 
 /* UIC 0 */
 #define VECNUM_U0           0           /* UART0                        */
diff --git a/doc/README.440-DDR-performance b/doc/README.440-DDR-performance
new file mode 100644
index 0000000000..17bc74764b
--- /dev/null
+++ b/doc/README.440-DDR-performance
@@ -0,0 +1,90 @@
+AMCC suggested to set the PMU bit to 0 for best performace on the
+PPC440 DDR controller. The 440er common DDR setup files (sdram.c &
+spd_sdram.c) are changed accordingly. So all 440er boards using
+these setup routines will automatically receive this performance
+increase.
+
+Please see below some benchmarks done by AMCC to demonstrate this
+performance changes:
+
+
+----------------------------------------
+SDRAM0_CFG0[PMU] = 1 (U-boot default for Bamboo, Yosemite and Yellowstone)
+----------------------------------------
+Stream benchmark results
+-------------------------------------------------------------
+This system uses 8 bytes per DOUBLE PRECISION word.
+-------------------------------------------------------------
+Array size = 2000000, Offset = 0
+Total memory required = 45.8 MB.
+Each test is run 10 times, but only
+the *best* time for each is used.
+-------------------------------------------------------------
+Your clock granularity/precision appears to be 1 microseconds.
+Each test below will take on the order of 112345 microseconds.
+   (= 112345 clock ticks)
+Increase the size of the arrays if this shows that you are not getting
+at least 20 clock ticks per test.
+-------------------------------------------------------------
+WARNING -- The above is only a rough guideline.
+For best results, please be sure you know the precision of your system
+timer.
+-------------------------------------------------------------
+Function      Rate (MB/s)   RMS time     Min time     Max time
+Copy:         256.7683       0.1248       0.1246       0.1250
+Scale:        246.0157       0.1302       0.1301       0.1302
+Add:          255.0316       0.1883       0.1882       0.1885
+Triad:        253.1245       0.1897       0.1896       0.1899
+
+
+TTCP Benchmark Results
+ttcp-t: socket
+ttcp-t: connect
+ttcp-t: buflen=8192, nbuf=2048, align=16384/0, port=5000  tcp  ->
+localhost
+ttcp-t: 16777216 bytes in 0.28 real seconds = 454.29 Mbit/sec +++
+ttcp-t: 2048 I/O calls, msec/call = 0.14, calls/sec = 7268.57
+ttcp-t: 0.0user 0.1sys 0:00real 60% 0i+0d 0maxrss 0+2pf 3+1506csw
+
+----------------------------------------
+SDRAM0_CFG0[PMU] = 0 (Suggested modification)
+Setting PMU = 0 provides a noticeable performance improvement *2% to
+5% improvement in memory performance.
+*Improves the Mbit/sec for TTCP benchmark by almost 76%.
+----------------------------------------
+Stream benchmark results
+-------------------------------------------------------------
+This system uses 8 bytes per DOUBLE PRECISION word.
+-------------------------------------------------------------
+Array size = 2000000, Offset = 0
+Total memory required = 45.8 MB.
+Each test is run 10 times, but only
+the *best* time for each is used.
+-------------------------------------------------------------
+Your clock granularity/precision appears to be 1 microseconds.
+Each test below will take on the order of 120066 microseconds.
+   (= 120066 clock ticks)
+Increase the size of the arrays if this shows that you are not getting
+at least 20 clock ticks per test.
+-------------------------------------------------------------
+WARNING -- The above is only a rough guideline.
+For best results, please be sure you know the precision of your system
+timer.
+-------------------------------------------------------------
+Function      Rate (MB/s)   RMS time     Min time     Max time
+Copy:         262.5167       0.1221       0.1219       0.1223
+Scale:        258.4856       0.1238       0.1238       0.1240
+Add:          262.5404       0.1829       0.1828       0.1831
+Triad:        266.8594       0.1800       0.1799       0.1802
+
+TTCP Benchmark Results
+ttcp-t: socket
+ttcp-t: connect
+ttcp-t: buflen=8192, nbuf=2048, align=16384/0, port=5000  tcp  ->
+localhost
+ttcp-t: 16777216 bytes in 0.16 real seconds = 804.06 Mbit/sec +++
+ttcp-t: 2048 I/O calls, msec/call = 0.08, calls/sec = 12864.89
+ttcp-t: 0.0user 0.0sys 0:00real 46% 0i+0d 0maxrss 0+2pf 120+1csw
+
+
+2006-07-28, Stefan Roese <sr@denx.de>
diff --git a/doc/README.bamboo b/doc/README.bamboo
new file mode 100644
index 0000000000..b50be01ab7
--- /dev/null
+++ b/doc/README.bamboo
@@ -0,0 +1,15 @@
+The configuration for the AMCC 440EP eval board "Bamboo" was changed
+to only use 384 kbytes of FLASH for the U-Boot image. This way the
+redundant environment can be saved in the remaining 2 sectors of the
+same flash chip.
+
+Caution: With an upgrade from an earlier U-Boot version the current
+environment will be erased since the environment is now saved in
+different sectors. By using the following command the environment can
+be saved after upgrading the U-Boot image and *before* resetting the
+board:
+
+setenv recover_env 'prot off FFF80000 FFF9FFFF;era FFF80000 FFF9FFFF;' \
+	'cp.b FFF60000 FFF80000 20000'
+
+2006-07-27, Stefan Roese <sr@denx.de>
diff --git a/doc/README.m68k b/doc/README.m68k
index d5accdd2d6..6dea2b567a 100644
--- a/doc/README.m68k
+++ b/doc/README.m68k
@@ -1,7 +1,12 @@
 
 U-Boot for Motorola M68K
 
-Last Update: January 12, 2004
+====================================================================
+History
+
+August 08,2005; 	Jens Scharsig <esw@bus-elektronik.de>
+			MCF5282 implementation without preloader
+January 12, 2004; 	<josef.baumgartner@telex.de>
 ====================================================================
 
 This file contains status information for the port of U-Boot to the
@@ -33,16 +38,8 @@ CPU specific code is located in: cpu/mcf52x2
 -----------------------------
 CPU specific code is located in: cpu/mcf52x2
 
-At the moment the code isn't fully implemented and still needs a pre-loader!
-The preloader must initialize the processor and then start u-boot. The board
-must be configured for a pre-loader (see 4.1)
-
-For the preloader, please see
-http://mailman.uclinux.org/pipermail/uclinux-dev/2003-December/023384.html
-
-U-boot is configured to run at 0x20000 at default. This can be configured by
-change TEXT_BASE in board/m5282evb/config.mk and CFG_MONITOR_BASE in
-include/configs/M5282EVB.h.
+The MCF5282 Port no longer needs a preloader and can place in external or
+internal FLASH.
 
 
 3. SUPPORTED BOARDs
@@ -67,6 +64,27 @@ Board specific code is located in: board/m5282evb
 
 To configure the board, type: make M5272C3_config
 
+At the moment the code isn't fully implemented and still needs a pre-loader!
+The preloader must initialize the processor and then start u-boot. The board
+must be configured for a pre-loader (see 4.1)
+
+For the preloader, please see
+http://mailman.uclinux.org/pipermail/uclinux-dev/2003-December/023384.html
+
+U-boot is configured to run at 0x20000 at default. This can be configured by
+change TEXT_BASE in board/m5282evb/config.mk and CFG_MONITOR_BASE in
+include/configs/M5282EVB.h.
+
+3.2 BuS EB+MCF-EV123
+---------------------
+
+Board specific code is located in: board/bus/EB+MCF-EV123
+
+To configure the board, type:
+
+make EB+MCF-EV123_config 		for external FLASH
+make EB+MCF-EV123_internal_config 	for internal FLASH
+
 
 4. CONFIGURATION OPTIONS/SETTINGS
 ----------------------------------
@@ -80,7 +98,6 @@ be compiled in. The start address of u-boot must be adjusted in
 the boards config header file (CFG_MONITOR_BASE) and Makefile
 (TEXT_BASE) to the load address.
 
-
 4.1 MCF5272 specific Options/Settings
 -------------------------------------
 
@@ -123,14 +140,27 @@ CFG_INT_FLASH_BASE
 CFG_ENET_BD_BASE
 		-- defines the base addres of the FEC buffer descriptors
 
+CFG_MFD
+		-- defines the PLL Multiplication Factor Devider
+		   (see table 9-4 of MCF user manual)
+CFG_RFD		-- defines the PLL Reduce Frecuency Devider
+		   (see table 9-4 of MCF user manual)
+
+CFG_CSx_BASE	-- defines the base address of chip select x
+CFG_CSx_SIZE	-- defines the memory size (address range) of chip select x
+CFG_CSx_WIDTH	-- defines the bus with of chip select x
+CFG_CSx_RO 	-- if set to 0 chip select x is read/wirte
+			else chipselct is read only
+CFG_CSx_WS	-- defines the number of wait states  of chip select x
+
+CFG_PxDDR	-- defines the contents of the Data Direction Registers
+CFG_PxDAT	-- defines the contents of the Data Registers
+CFG_PXCNT	-- defines the contents of the Port Configuration Registers
+
+CFG_PxPAR	-- defines the function of ports
+
 
 5. COMPILER
 -----------
 To create U-Boot the gcc-2.95.3 compiler set (m68k-elf-20030314) from uClinux.org was used.
 You can download it from: http://www.uclinux.org/pub/uClinux/m68k-elf-tools/
-
-
-Regards,
-
-Josef
-<josef.baumgartner@telex.de>
diff --git a/doc/README.serial_multi b/doc/README.serial_multi
index a8d48fc4d9..40f78159f5 100644
--- a/doc/README.serial_multi
+++ b/doc/README.serial_multi
@@ -52,3 +52,29 @@ PPC4XX Specific
 	setenv stdout serial0
 	setenv stderr serial0
 	setenv stdin serial0
+
+MPC5xxx Specific
+================
+
+Up to two PSCs can be used as console.
+
+Support for hardware handshake has not been implemented yet.
+
+*) The first (default) console port is defined by:
+	#define CONFIG_PSC_CONSOLE <PSC number>
+
+*) The second (alternative) console port is defined by:
+	#define CONFIG_PSC_CONSOLE2 <PSC number>
+
+*) Commands to switch to the second console:
+	setenv stdout serial1
+	setenv stderr serial1
+	setenv stdin serial1
+
+*) Commands to switch to the first console:
+	setenv stdout serial0
+	setenv stderr serial0
+	setenv stdin serial0
+
+*) If a file descriptor is set to "serial" then the
+   current serial device will be used.
diff --git a/drivers/Makefile b/drivers/Makefile
index e6176ed86a..9be95c7bb8 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -31,7 +31,7 @@ OBJS	= 3c589.o 5701rls.o ali512x.o \
 	  bcm570x.o bcm570x_autoneg.o cfb_console.o cfi_flash.o \
 	  cs8900.o ct69000.o dataflash.o dc2114x.o dm9000x.o \
 	  e1000.o eepro100.o \
-	  i8042.o i82365.o inca-ip_sw.o keyboard.o \
+	  i8042.o inca-ip_sw.o keyboard.o \
 	  lan91c96.o \
 	  natsemi.o ne2000.o netarm_eth.o netconsole.o \
 	  ns16550.o ns8382x.o ns87308.o ns7520_eth.o omap1510_i2c.o \
@@ -48,7 +48,9 @@ OBJS	= 3c589.o 5701rls.o ali512x.o \
 	  ti_pci1410a.o tigon3.o tsec.o \
 	  usbdcore.o usbdcore_ep0.o usbdcore_omap1510.o usbtty.o \
 	  videomodes.o w83c553f.o \
-	  ks8695eth.o
+	  ks8695eth.o \
+	  pxa_pcmcia.o mpc8xx_pcmcia.o tqm8xx_pcmcia.o	\
+	  rpx_pcmcia.o
 
 all:	$(LIB)
 
diff --git a/drivers/keyboard.c b/drivers/keyboard.c
index 1579095558..9975202d7a 100644
--- a/drivers/keyboard.c
+++ b/drivers/keyboard.c
@@ -33,7 +33,7 @@
 
 #define	KBD_BUFFER_LEN		0x20  /* size of the keyboardbuffer */
 
-#ifdef CONFIG_MPC5xxx
+#if defined(CONFIG_MPC5xxx) || defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || defined(CONFIG_MPC8555)
 int ps2ser_check(void);
 #endif
 
@@ -75,7 +75,7 @@ static void kbd_put_queue(char data)
 /* test if a character is in the queue */
 static int kbd_testc(void)
 {
-#ifdef CONFIG_MPC5xxx
+#if defined(CONFIG_MPC5xxx) || defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || defined(CONFIG_MPC8555)
 	/* no ISR is used, so received chars must be polled */
 	ps2ser_check();
 #endif
@@ -90,7 +90,7 @@ static int kbd_getc(void)
 {
 	char c;
 	while(in_pointer==out_pointer) {
-#ifdef CONFIG_MPC5xxx
+#if defined(CONFIG_MPC5xxx) || defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || defined(CONFIG_MPC8555)
 	/* no ISR is used, so received chars must be polled */
 	ps2ser_check();
 #endif
diff --git a/drivers/mpc8xx_pcmcia.c b/drivers/mpc8xx_pcmcia.c
new file mode 100644
index 0000000000..399a719e56
--- /dev/null
+++ b/drivers/mpc8xx_pcmcia.c
@@ -0,0 +1,304 @@
+#include <common.h>
+#if defined(CONFIG_8xx)
+#include <mpc8xx.h>
+#endif
+#include <pcmcia.h>
+
+#undef	CONFIG_PCMCIA
+
+#if	(CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+#define	CONFIG_PCMCIA
+#endif
+
+#if	(CONFIG_COMMANDS & CFG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD)
+#define	CONFIG_PCMCIA
+#endif
+
+#if defined(CONFIG_8xx)	&& defined(CONFIG_PCMCIA)
+
+#if	defined(CONFIG_IDE_8xx_PCCARD)
+extern int check_ide_device (int slot);
+#endif
+
+extern int pcmcia_hardware_enable (int slot);
+extern int pcmcia_voltage_set(int slot, int vcc, int vpp);
+
+#if	(CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+extern int pcmcia_hardware_disable(int slot);
+#endif
+
+static u_int m8xx_get_graycode(u_int size);
+#if 0 /* Disabled */
+static u_int m8xx_get_speed(u_int ns, u_int is_io);
+#endif
+
+/* look up table for pgcrx registers */
+u_int *pcmcia_pgcrx[2] = {
+	&((immap_t *)CFG_IMMR)->im_pcmcia.pcmc_pgcra,
+	&((immap_t *)CFG_IMMR)->im_pcmcia.pcmc_pgcrb,
+};
+
+/*
+ * Search this table to see if the windowsize is
+ * supported...
+ */
+
+#define M8XX_SIZES_NO 32
+
+static const u_int m8xx_size_to_gray[M8XX_SIZES_NO] =
+{ 0x00000001, 0x00000002, 0x00000008, 0x00000004,
+  0x00000080, 0x00000040, 0x00000010, 0x00000020,
+  0x00008000, 0x00004000, 0x00001000, 0x00002000,
+  0x00000100, 0x00000200, 0x00000800, 0x00000400,
+
+  0x0fffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+  0x01000000, 0x02000000, 0xffffffff, 0x04000000,
+  0x00010000, 0x00020000, 0x00080000, 0x00040000,
+  0x00800000, 0x00400000, 0x00100000, 0x00200000 };
+
+
+/* -------------------------------------------------------------------- */
+
+#ifdef	CONFIG_HMI10
+#define	HMI10_FRAM_TIMING	(	PCMCIA_SHT(2)	\
+ 				|	PCMCIA_SST(2)	\
+ 				|	PCMCIA_SL(4))
+#endif
+
+#if	defined(CONFIG_LWMON) || defined(CONFIG_NSCU)
+#define	CFG_PCMCIA_TIMING	(	PCMCIA_SHT(9)	\
+ 				|	PCMCIA_SST(3)	\
+ 				|	PCMCIA_SL(12))
+#else
+#define	CFG_PCMCIA_TIMING	(	PCMCIA_SHT(2)	\
+ 				|	PCMCIA_SST(4)	\
+ 				|	PCMCIA_SL(9))
+#endif
+
+/* -------------------------------------------------------------------- */
+
+int pcmcia_on (void)
+{
+	u_long reg, base;
+	pcmcia_win_t *win;
+	u_int slotbit;
+	u_int rc, slot;
+	int i;
+
+	debug ("Enable PCMCIA " PCMCIA_SLOT_MSG "\n");
+
+	/* intialize the fixed memory windows */
+	win = (pcmcia_win_t *)(&((immap_t *)CFG_IMMR)->im_pcmcia.pcmc_pbr0);
+	base = CFG_PCMCIA_MEM_ADDR;
+
+	if((reg = m8xx_get_graycode(CFG_PCMCIA_MEM_SIZE)) == -1) {
+		printf ("Cannot set window size to 0x%08x\n",
+			CFG_PCMCIA_MEM_SIZE);
+		return (1);
+	}
+
+	slotbit = PCMCIA_SLOT_x;
+	for (i=0; i<PCMCIA_MEM_WIN_NO; ++i) {
+		win->br = base;
+
+#if	(PCMCIA_SOCKETS_NO == 2)
+		if (i == 4) /* Another slot starting from win 4 */
+			slotbit = (slotbit ? PCMCIA_PSLOT_A : PCMCIA_PSLOT_B);
+#endif
+		switch (i) {
+#ifdef	CONFIG_IDE_8xx_PCCARD
+		case 4:
+#ifdef	CONFIG_HMI10
+		{	/* map FRAM area */
+			win->or = (	PCMCIA_BSIZE_256K
+				|	PCMCIA_PPS_8
+				|	PCMCIA_PRS_ATTR
+				|	slotbit
+				|	PCMCIA_PV
+				|	HMI10_FRAM_TIMING );
+			break;
+		}
+#endif
+		case 0:	{	/* map attribute memory */
+			win->or = (	PCMCIA_BSIZE_64M
+				|	PCMCIA_PPS_8
+				|	PCMCIA_PRS_ATTR
+				|	slotbit
+				|	PCMCIA_PV
+				|	CFG_PCMCIA_TIMING );
+			break;
+		}
+		case 5:
+		case 1: {	/* map I/O window for data reg */
+			win->or = (	PCMCIA_BSIZE_1K
+				|	PCMCIA_PPS_16
+				|	PCMCIA_PRS_IO
+				|	slotbit
+				|	PCMCIA_PV
+				|	CFG_PCMCIA_TIMING );
+			break;
+		}
+		case 6:
+		case 2: {	/* map I/O window for cmd/ctrl reg block */
+			win->or = (	PCMCIA_BSIZE_1K
+				|	PCMCIA_PPS_8
+				|	PCMCIA_PRS_IO
+				|	slotbit
+				|	PCMCIA_PV
+				|	CFG_PCMCIA_TIMING );
+			break;
+		}
+#endif	/* CONFIG_IDE_8xx_PCCARD */
+#ifdef	CONFIG_HMI10
+		case 3: {	/* map I/O window for 4xUART data/ctrl */
+			win->br += 0x40000;
+			win->or = (	PCMCIA_BSIZE_256K
+				|	PCMCIA_PPS_8
+				|	PCMCIA_PRS_IO
+				|	slotbit
+				|	PCMCIA_PV
+				|	CFG_PCMCIA_TIMING );
+			break;
+		}
+#endif	/* CONFIG_HMI10 */
+		default:	/* set to not valid */
+			win->or = 0;
+			break;
+		}
+
+		debug ("MemWin %d: PBR 0x%08lX  POR %08lX\n",
+		       i, win->br, win->or);
+		base += CFG_PCMCIA_MEM_SIZE;
+		++win;
+	}
+
+	for (i=0, rc=0, slot=_slot_; i<PCMCIA_SOCKETS_NO; i++, slot = !slot) {
+		/* turn off voltage */
+		if ((rc = pcmcia_voltage_set(slot, 0, 0)))
+			continue;
+
+		/* Enable external hardware */
+		if ((rc = pcmcia_hardware_enable(slot)))
+			continue;
+
+#ifdef	CONFIG_IDE_8xx_PCCARD
+		if ((rc = check_ide_device(i)))
+			continue;
+#endif
+	}
+	return rc;
+}
+
+#if	(CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+int pcmcia_off (void)
+{
+	int i;
+	pcmcia_win_t *win;
+
+	printf ("Disable PCMCIA " PCMCIA_SLOT_MSG "\n");
+
+	/* clear interrupt state, and disable interrupts */
+	((immap_t *)CFG_IMMR)->im_pcmcia.pcmc_pscr =  PCMCIA_MASK(_slot_);
+	((immap_t *)CFG_IMMR)->im_pcmcia.pcmc_per &= ~PCMCIA_MASK(_slot_);
+
+	/* turn off interrupt and disable CxOE */
+	PCMCIA_PGCRX(_slot_) = __MY_PCMCIA_GCRX_CXOE;
+
+	/* turn off memory windows */
+	win = (pcmcia_win_t *)(&((immap_t *)CFG_IMMR)->im_pcmcia.pcmc_pbr0);
+
+	for (i=0; i<PCMCIA_MEM_WIN_NO; ++i) {
+		/* disable memory window */
+		win->or = 0;
+		++win;
+	}
+
+	/* turn off voltage */
+	pcmcia_voltage_set(_slot_, 0, 0);
+
+	/* disable external hardware */
+	printf ("Shutdown and Poweroff " PCMCIA_SLOT_MSG "\n");
+	pcmcia_hardware_disable(_slot_);
+	return 0;
+}
+#endif	/* CFG_CMD_PCMCIA */
+
+
+static u_int m8xx_get_graycode(u_int size)
+{
+	u_int k;
+
+	for (k = 0; k < M8XX_SIZES_NO; k++) {
+		if(m8xx_size_to_gray[k] == size)
+			break;
+	}
+
+	if((k == M8XX_SIZES_NO) || (m8xx_size_to_gray[k] == -1))
+		k = -1;
+
+	return k;
+}
+
+#if	0
+
+#if	defined(CONFIG_RPXCLASSIC) || defined(CONFIG_RPXLITE)
+
+/* The RPX boards seems to have it's bus monitor timeout set to 6*8 clocks.
+ * SYPCR is write once only, therefore must the slowest memory be faster
+ * than the bus monitor or we will get a machine check due to the bus timeout.
+ */
+#undef	PCMCIA_BMT_LIMIT
+#define	PCMCIA_BMT_LIMIT (6*8)
+#endif
+
+static u_int m8xx_get_speed(u_int ns, u_int is_io)
+{
+	u_int reg, clocks, psst, psl, psht;
+
+	if(!ns) {
+
+		/*
+		* We get called with IO maps setup to 0ns
+		* if not specified by the user.
+		* They should be 255ns.
+		*/
+
+		if(is_io)
+			ns = 255;
+		else
+			ns = 100;  /* fast memory if 0 */
+	}
+
+	/*
+	* In PSST, PSL, PSHT fields we tell the controller
+	* timing parameters in CLKOUT clock cycles.
+	* CLKOUT is the same as GCLK2_50.
+	*/
+
+	/* how we want to adjust the timing - in percent */
+
+#define ADJ 180 /* 80 % longer accesstime - to be sure */
+
+	clocks = ((M8XX_BUSFREQ / 1000) * ns) / 1000;
+	clocks = (clocks * ADJ) / (100*1000);
+
+	if(clocks >= PCMCIA_BMT_LIMIT) {
+		DEBUG(0, "Max access time limit reached\n");
+		clocks = PCMCIA_BMT_LIMIT-1;
+	}
+
+	psst = clocks / 7;          /* setup time */
+	psht = clocks / 7;          /* hold time */
+	psl  = (clocks * 5) / 7;    /* strobe length */
+
+	psst += clocks - (psst + psht + psl);
+
+	reg =  psst << 12;
+	reg |= psl  << 7;
+	reg |= psht << 16;
+
+	return reg;
+}
+#endif	/* 0 */
+
+#endif	/* CONFIG_8xx && CONFIG_PCMCIA */
diff --git a/drivers/pci.c b/drivers/pci.c
index 3c24b99c37..050582f782 100644
--- a/drivers/pci.c
+++ b/drivers/pci.c
@@ -163,7 +163,7 @@ pci_dev_t pci_find_devices(struct pci_device_id *ids, int index)
 		for (bus = hose->first_busno; bus <= hose->last_busno; bus++)
 #endif
 			for (bdf = PCI_BDF(bus,0,0);
-#ifdef CONFIG_ELPPC
+#if defined(CONFIG_ELPPC) || defined(CONFIG_PPMC7XX)
 			     bdf < PCI_BDF(bus,PCI_MAX_PCI_DEVICES-1,PCI_MAX_PCI_FUNCTIONS-1);
 #else
 			     bdf < PCI_BDF(bus+1,0,0);
diff --git a/drivers/pci_indirect.c b/drivers/pci_indirect.c
index f0c4a1ccf4..d7be0810f5 100644
--- a/drivers/pci_indirect.c
+++ b/drivers/pci_indirect.c
@@ -60,7 +60,7 @@ indirect_##rw##_config_##size(struct pci_controller *hose,               \
 	cfg_##rw(val, hose->cfg_data + (offset & mask), type, op);       \
 	return 0;                                                        \
 }
-#elif defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
+#elif defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SPE)
 #define INDIRECT_PCI_OP(rw, size, type, op, mask)			 \
 static int								 \
 indirect_##rw##_config_##size(struct pci_controller *hose, 		 \
diff --git a/drivers/ps2ser.c b/drivers/ps2ser.c
index 724fa40582..4e304f7407 100644
--- a/drivers/ps2ser.c
+++ b/drivers/ps2ser.c
@@ -20,6 +20,9 @@
 #include <asm/io.h>
 #include <asm/atomic.h>
 #include <ps2mult.h>
+#if defined(CFG_NS16550) || defined(CONFIG_MPC85xx)
+#include <ns16550.h>
+#endif
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -45,13 +48,24 @@ DECLARE_GLOBAL_DATA_PTR;
 #else
 #error CONFIG_PS2SERIAL must be in 1 ... 6
 #endif
-#endif /* CONFIG_MPC5xxx */
+
+#elif defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || defined(CONFIG_MPC8555)
+
+#if CONFIG_PS2SERIAL == 1
+#define COM_BASE (CFG_CCSRBAR+0x4500)
+#elif CONFIG_PS2SERIAL == 2
+#define COM_BASE (CFG_CCSRBAR+0x4600)
+#else
+#error CONFIG_PS2SERIAL must be in 1 ... 2
+#endif
+
+#endif /* CONFIG_MPC5xxx / CONFIG_MPC8540 / other */
 
 static int	ps2ser_getc_hw(void);
 static void	ps2ser_interrupt(void *dev_id);
 
 extern struct	serial_state rs_table[]; /* in serial.c */
-#ifndef CONFIG_MPC5xxx
+#if !defined(CONFIG_MPC5xxx) && !defined(CONFIG_MPC8540) && !defined(CONFIG_MPC8541) && !defined(CONFIG_MPC8555)
 static struct	serial_state *state;
 #endif
 
@@ -106,7 +120,23 @@ int ps2ser_init(void)
 	return (0);
 }
 
-#else /* !CONFIG_MPC5xxx */
+#elif defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || defined(CONFIG_MPC8555)
+int ps2ser_init(void)
+{
+	NS16550_t com_port = (NS16550_t)COM_BASE;
+
+	com_port->ier = 0x00;
+	com_port->lcr = LCR_BKSE | LCR_8N1;
+	com_port->dll = (CFG_NS16550_CLK / 16 / PS2SER_BAUD) & 0xff;
+	com_port->dlm = ((CFG_NS16550_CLK / 16 / PS2SER_BAUD) >> 8) & 0xff;
+	com_port->lcr = LCR_8N1;
+	com_port->mcr = (MCR_DTR | MCR_RTS);
+	com_port->fcr = (FCR_FIFO_EN | FCR_RXSR | FCR_TXSR);
+
+	return (0);
+}
+
+#else /* !CONFIG_MPC5xxx && !CONFIG_MPC8540 / other */
 
 static inline unsigned int ps2ser_in(int offset)
 {
@@ -150,12 +180,14 @@ int ps2ser_init(void)
 
 	return 0;
 }
-#endif /* CONFIG_MPC5xxx */
+#endif /* CONFIG_MPC5xxx / CONFIG_MPC8540 / other */
 
 void ps2ser_putc(int chr)
 {
 #ifdef CONFIG_MPC5xxx
 	volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
+#elif defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || defined(CONFIG_MPC8555)
+	NS16550_t com_port = (NS16550_t)COM_BASE;
 #endif
 #ifdef DEBUG
 	printf(">>>> 0x%02x\n", chr);
@@ -165,6 +197,9 @@ void ps2ser_putc(int chr)
 	while (!(psc->psc_status & PSC_SR_TXRDY));
 
 	psc->psc_buffer_8 = chr;
+#elif defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || defined(CONFIG_MPC8555)
+	while ((com_port->lsr & LSR_THRE) == 0);
+	com_port->thr = chr;
 #else
 	while (!(ps2ser_in(UART_LSR) & UART_LSR_THRE));
 
@@ -176,6 +211,8 @@ static int ps2ser_getc_hw(void)
 {
 #ifdef CONFIG_MPC5xxx
 	volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
+#elif defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || defined(CONFIG_MPC8555)
+	NS16550_t com_port = (NS16550_t)COM_BASE;
 #endif
 	int res = -1;
 
@@ -183,6 +220,10 @@ static int ps2ser_getc_hw(void)
 	if (psc->psc_status & PSC_SR_RXRDY) {
 		res = (psc->psc_buffer_8);
 	}
+#elif defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || defined(CONFIG_MPC8555)
+	if (com_port->lsr & LSR_DR) {
+		res = com_port->rbr;
+	}
 #else
 	if (ps2ser_in(UART_LSR) & UART_LSR_DR) {
 		res = (ps2ser_in(UART_RX));
@@ -238,6 +279,8 @@ static void ps2ser_interrupt(void *dev_id)
 {
 #ifdef CONFIG_MPC5xxx
 	volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
+#elif defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || defined(CONFIG_MPC8555)
+	NS16550_t com_port = (NS16550_t)COM_BASE;
 #endif
 	int chr;
 	int status;
@@ -246,6 +289,8 @@ static void ps2ser_interrupt(void *dev_id)
 		chr = ps2ser_getc_hw();
 #ifdef CONFIG_MPC5xxx
 		status = psc->psc_status;
+#elif defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || defined(CONFIG_MPC8555)
+		status = com_port->lsr;
 #else
 		status = ps2ser_in(UART_IIR);
 #endif
@@ -260,6 +305,8 @@ static void ps2ser_interrupt(void *dev_id)
 		}
 #ifdef CONFIG_MPC5xxx
 	} while (status & PSC_SR_RXRDY);
+#elif defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || defined(CONFIG_MPC8555)
+	} while (status & LSR_DR);
 #else
 	} while (status & UART_IIR_RDI);
 #endif
diff --git a/drivers/pxa_pcmcia.c b/drivers/pxa_pcmcia.c
new file mode 100644
index 0000000000..d9d38bbfcd
--- /dev/null
+++ b/drivers/pxa_pcmcia.c
@@ -0,0 +1,95 @@
+#include <common.h>
+#include <config.h>
+
+#ifdef CONFIG_PXA_PCMCIA
+
+#include <pcmcia.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/io.h>
+
+static inline void msWait(unsigned msVal)
+{
+	udelay(msVal*1000);
+}
+
+int pcmcia_on (void)
+{
+	unsigned int reg_arr[] = {
+		0x48000028, CFG_MCMEM0_VAL,
+		0x4800002c, CFG_MCMEM1_VAL,
+		0x48000030, CFG_MCATT0_VAL,
+		0x48000034, CFG_MCATT1_VAL,
+		0x48000038, CFG_MCIO0_VAL,
+		0x4800003c, CFG_MCIO1_VAL,
+
+		0, 0
+	};
+	int i, rc;
+
+#ifdef CONFIG_EXADRON1
+	int cardDetect;
+	volatile unsigned int *v_pBCRReg =
+			(volatile unsigned int *) 0x08000000;
+#endif
+
+	debug ("%s\n", __FUNCTION__);
+
+	i = 0;
+	while (reg_arr[i])
+		*((volatile unsigned int *) reg_arr[i++]) |= reg_arr[i++];
+	udelay (1000);
+
+	debug ("%s: programmed mem controller \n", __FUNCTION__);
+
+#ifdef CONFIG_EXADRON1
+
+/*define useful BCR masks */
+#define BCR_CF_INIT_VAL  		    0x00007230
+#define BCR_CF_PWRON_BUSOFF_RESETOFF_VAL    0x00007231
+#define BCR_CF_PWRON_BUSOFF_RESETON_VAL     0x00007233
+#define BCR_CF_PWRON_BUSON_RESETON_VAL      0x00007213
+#define BCR_CF_PWRON_BUSON_RESETOFF_VAL     0x00007211
+
+	/* we see from the GPIO bit if the card is present */
+	cardDetect = !(GPLR0 & GPIO_bit (14));
+
+	if (cardDetect) {
+		printf ("No PCMCIA card found!\n");
+	}
+
+	/* reset the card via the BCR line */
+	*v_pBCRReg = (unsigned) BCR_CF_INIT_VAL;
+	msWait (500);
+
+	*v_pBCRReg = (unsigned) BCR_CF_PWRON_BUSOFF_RESETOFF_VAL;
+	msWait (500);
+
+	*v_pBCRReg = (unsigned) BCR_CF_PWRON_BUSOFF_RESETON_VAL;
+	msWait (500);
+
+	*v_pBCRReg = (unsigned) BCR_CF_PWRON_BUSON_RESETON_VAL;
+	msWait (500);
+
+	*v_pBCRReg = (unsigned) BCR_CF_PWRON_BUSON_RESETOFF_VAL;
+	msWait (1500);
+
+	/* enable address bus */
+	GPCR1 = 0x01;
+	/* and the first CF slot */
+	MECR = 0x00000002;
+
+#endif /* EXADRON 1 */
+
+	rc = check_ide_device (0);	/* use just slot 0 */
+
+	return rc;
+}
+
+#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+int pcmcia_off (void)
+{
+	return 0;
+}
+#endif
+
+#endif /* CONFIG_PXA_PCMCIA */
diff --git a/drivers/rpx_pcmcia.c b/drivers/rpx_pcmcia.c
new file mode 100644
index 0000000000..2a0a9e05a2
--- /dev/null
+++ b/drivers/rpx_pcmcia.c
@@ -0,0 +1,73 @@
+/* -------------------------------------------------------------------- */
+/* RPX Boards from Embedded Planet					*/
+/* -------------------------------------------------------------------- */
+#include <common.h>
+#ifdef CONFIG_8xx
+#include <mpc8xx.h>
+#endif
+#include <pcmcia.h>
+
+#undef	CONFIG_PCMCIA
+
+#if	CONFIG_COMMANDS & CFG_CMD_PCMCIA
+#define	CONFIG_PCMCIA
+#endif
+
+#if	(CONFIG_COMMANDS & CFG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD)
+#define	CONFIG_PCMCIA
+#endif
+
+#if	defined(CONFIG_PCMCIA)	\
+	&& (defined(CONFIG_RPXCLASSIC) || defined(CONFIG_RPXLITE))
+
+#define	PCMCIA_BOARD_MSG	"RPX CLASSIC or RPX LITE"
+
+int pcmcia_voltage_set(int slot, int vcc, int vpp)
+{
+	u_long reg = 0;
+
+	switch(vcc) {
+		case 0: break;
+		case 33: reg |= BCSR1_PCVCTL4; break;
+		case 50: reg |= BCSR1_PCVCTL5; break;
+		default: return 1;
+	}
+
+	switch(vpp) {
+		case 0: break;
+		case 33:
+		case 50:
+			if(vcc == vpp)
+				reg |= BCSR1_PCVCTL6;
+			else
+				return 1;
+			break;
+		case 120:
+			reg |= BCSR1_PCVCTL7;
+			default: return 1;
+	}
+
+	/* first, turn off all power */
+	*((uint *)RPX_CSR_ADDR) &= ~(BCSR1_PCVCTL4 | BCSR1_PCVCTL5
+			| BCSR1_PCVCTL6 | BCSR1_PCVCTL7);
+
+	/* enable new powersettings */
+	*((uint *)RPX_CSR_ADDR) |= reg;
+
+	return 0;
+}
+
+int pcmcia_hardware_enable (int slot)
+{
+	return 0;	/* No hardware to enable */
+}
+
+#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+static int pcmcia_hardware_disable(int slot)
+{
+	return 0;	/* No hardware to disable */
+}
+#endif	/* CONFIG_COMMANDS & CFG_CMD_PCMCIA */
+
+
+#endif	/* CONFIG_PCMCIA && (CONFIG_RPXCLASSIC || CONFIG_RPXLITE) */
diff --git a/drivers/s3c4510b_eth.c b/drivers/s3c4510b_eth.c
index 0274dd2f99..48901aa12f 100644
--- a/drivers/s3c4510b_eth.c
+++ b/drivers/s3c4510b_eth.c
@@ -175,7 +175,7 @@ s32 eth_send(volatile void *packet, s32 length)
 	}
 
 	/* copy user data into frame data pointer */
-	memcpy((void *)eth->m_curTX_FD->m_frameDataPtr.bf.dataPtr,
+	memcpy((void *)(eth->m_curTX_FD->m_frameDataPtr.bf.dataPtr),
 	       (void *)packet,
 	       length);
 
diff --git a/drivers/tqm8xx_pcmcia.c b/drivers/tqm8xx_pcmcia.c
new file mode 100644
index 0000000000..a0f53cd684
--- /dev/null
+++ b/drivers/tqm8xx_pcmcia.c
@@ -0,0 +1,330 @@
+/* -------------------------------------------------------------------- */
+/* TQM8xxL Boards by TQ Components					*/
+/* SC8xx   Boards by SinoVee Microsystems				*/
+/* -------------------------------------------------------------------- */
+#include <common.h>
+#ifdef CONFIG_8xx
+#include <mpc8xx.h>
+#endif
+#include <pcmcia.h>
+
+#undef	CONFIG_PCMCIA
+
+#if	(CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+#define	CONFIG_PCMCIA
+#endif
+
+#if	(CONFIG_COMMANDS & CFG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD)
+#define	CONFIG_PCMCIA
+#endif
+
+#if	defined(CONFIG_PCMCIA)	\
+	&& (defined(CONFIG_TQM8xxL) || defined(CONFIG_SVM_SC8xx))
+
+#if	defined(CONFIG_VIRTLAB2)
+#define	PCMCIA_BOARD_MSG	"Virtlab2"
+#elif	defined(CONFIG_TQM8xxL)
+#define	PCMCIA_BOARD_MSG	"TQM8xxL"
+#elif	defined(CONFIG_SVM_SC8xx)
+#define	PCMCIA_BOARD_MSG	"SC8xx"
+#endif
+
+#if	defined(CONFIG_NSCU)
+
+#define	power_config(slot)	do {} while (0)
+#define	power_off(slot)		do {} while (0)
+#define	power_on_5_0(slot)	do {} while (0)
+#define	power_on_3_3(slot)	do {} while (0)
+
+#elif	defined(CONFIG_HMI10)
+
+static inline void power_config(int slot)
+{
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	/*
+	 * Configure Port B  pins for
+	 * 5 Volts Enable and 3 Volts enable
+	*/
+	immap->im_cpm.cp_pbpar &= ~(0x00000300);
+}
+
+static inline void power_off(int slot)
+{
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	/* remove all power */
+	immap->im_cpm.cp_pbdat |= 0x00000300;
+}
+
+static inline void power_on_5_0(int slot)
+{
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	immap->im_cpm.cp_pbdat &= ~(0x0000100);
+	immap->im_cpm.cp_pbdir |= 0x00000300;
+}
+
+static inline void power_on_3_3(int slot)
+{
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	immap->im_cpm.cp_pbdat &= ~(0x0000200);
+	immap->im_cpm.cp_pbdir |= 0x00000300;
+}
+
+#elif	defined(CONFIG_VIRTLAB2)
+
+#define	power_config(slot)	do {} while (0)
+static inline void power_off(int slot)
+{
+	volatile unsigned char	*powerctl =
+			(volatile unsigned char *)PCMCIA_CTRL;
+	*powerctl = 0;
+}
+
+static inline void power_on_5_0(int slot)
+{
+	volatile unsigned char	*powerctl =
+			(volatile unsigned char *)PCMCIA_CTRL;
+			*powerctl = 2;	/* Enable 5V Vccout */
+}
+
+static inline void power_on_3_3(int slot)
+{
+	volatile unsigned char	*powerctl =
+			(volatile unsigned char *)PCMCIA_CTRL;
+			*powerctl = 1;	/* Enable 3.3V Vccout */
+}
+
+#else
+
+static inline void power_config(int slot)
+{
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	/*
+	* Configure Port C pins for
+	* 5 Volts Enable and 3 Volts enable
+	*/
+	immap->im_ioport.iop_pcpar &= ~(0x0002 | 0x0004);
+	immap->im_ioport.iop_pcso  &= ~(0x0002 | 0x0004);
+}
+
+static inline void power_off(int slot)
+{
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	immap->im_ioport.iop_pcdat &= ~(0x0002 | 0x0004);
+}
+
+static inline void power_on_5_0(int slot)
+{
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	immap->im_ioport.iop_pcdat |= 0x0004;
+	immap->im_ioport.iop_pcdir |= (0x0002 | 0x0004);
+}
+
+static inline void power_on_3_3(int slot)
+{
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	immap->im_ioport.iop_pcdat |= 0x0002;
+	immap->im_ioport.iop_pcdir |= (0x0002 | 0x0004);
+}
+
+#endif
+
+#ifdef	CONFIG_HMI10
+static inline int check_card_is_absent(int slot)
+{
+	volatile pcmconf8xx_t *pcmp =
+		(pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+	return pcmp->pcmc_pipr & (0x10000000 >> (slot << 4));
+}
+#else
+static inline int check_card_is_absent(int slot)
+{
+	volatile pcmconf8xx_t *pcmp =
+		(pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+	return pcmp->pcmc_pipr & (0x18000000 >> (slot << 4));
+}
+#endif
+
+#ifdef	NSCU_OE_INV
+#define	NSCU_GCRX_CXOE	0
+#else
+#define	NSCU_GCRX_CXOE	__MY_PCMCIA_GCRX_CXOE
+#endif
+
+int pcmcia_hardware_enable(int slot)
+{
+	volatile pcmconf8xx_t *pcmp =
+		(pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+	volatile sysconf8xx_t *sysp =
+		(sysconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_siu_conf));
+	uint reg, mask;
+
+	debug ("hardware_enable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
+
+	udelay(10000);
+
+	/*
+	* Configure SIUMCR to enable PCMCIA port B
+	* (VFLS[0:1] are not used for debugging, we connect FRZ# instead)
+	*/
+	sysp->sc_siumcr &= ~SIUMCR_DBGC11;	/* set DBGC to 00 */
+
+	/* clear interrupt state, and disable interrupts */
+	pcmp->pcmc_pscr =  PCMCIA_MASK(slot);
+	pcmp->pcmc_per &= ~PCMCIA_MASK(slot);
+
+	/*
+	* Disable interrupts, DMA, and PCMCIA buffers
+	* (isolate the interface) and assert RESET signal
+	*/
+	debug ("Disable PCMCIA buffers and assert RESET\n");
+	reg  = 0;
+	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg |= NSCU_GCRX_CXOE;
+
+	PCMCIA_PGCRX(slot) = reg;
+	udelay(500);
+
+	power_config(slot);
+	power_off(slot);
+
+	/*
+	 * Make sure there is a card in the slot, then configure the interface.
+	*/
+	udelay(10000);
+	debug ("[%d] %s: PIPR(%p)=0x%x\n", __LINE__,__FUNCTION__,
+	       &(pcmp->pcmc_pipr),pcmp->pcmc_pipr);
+
+	if (check_card_is_absent(slot)) {
+		printf ("   No Card found\n");
+		return (1);
+	}
+
+	/*
+	* Power On.
+	*/
+	mask = PCMCIA_VS1(slot) | PCMCIA_VS2(slot);
+	reg  = pcmp->pcmc_pipr;
+	debug ("PIPR: 0x%x ==> VS1=o%s, VS2=o%s\n",
+	       reg,
+	       (reg&PCMCIA_VS1(slot))?"n":"ff",
+	       (reg&PCMCIA_VS2(slot))?"n":"ff");
+
+	if ((reg & mask) == mask) {
+		power_on_5_0(slot);
+		puts (" 5.0V card found: ");
+	} else {
+		power_on_3_3(slot);
+		puts (" 3.3V card found: ");
+	}
+
+#if 0
+	/*  VCC switch error flag, PCMCIA slot INPACK_ pin */
+	cp->cp_pbdir &= ~(0x0020 | 0x0010);
+	cp->cp_pbpar &= ~(0x0020 | 0x0010);
+	udelay(500000);
+#endif
+
+	udelay(1000);
+	debug ("Enable PCMCIA buffers and stop RESET\n");
+	reg  =  PCMCIA_PGCRX(slot);
+	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	reg &= ~NSCU_GCRX_CXOE;
+
+	PCMCIA_PGCRX(slot) = reg;
+
+	udelay(250000);	/* some cards need >150 ms to come up :-( */
+
+	debug ("# hardware_enable done\n");
+
+	return (0);
+}
+
+
+#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+int pcmcia_hardware_disable(int slot)
+{
+	u_long reg;
+
+	debug ("hardware_disable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
+
+
+	/* remove all power */
+	power_off(slot);
+
+	debug ("Disable PCMCIA buffers and assert RESET\n");
+	reg  = 0;
+	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg |= NSCU_GCRX_CXOE;			/* active low  */
+
+	PCMCIA_PGCRX(slot) = reg;
+
+	udelay(10000);
+
+	return (0);
+}
+#endif	/* CFG_CMD_PCMCIA */
+
+int pcmcia_voltage_set(int slot, int vcc, int vpp)
+{
+#ifndef CONFIG_NSCU
+	u_long reg;
+# ifdef DEBUG
+	volatile pcmconf8xx_t *pcmp =
+		(pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+# endif
+
+	debug ("voltage_set: " PCMCIA_BOARD_MSG
+		" Slot %c, Vcc=%d.%d, Vpp=%d.%d\n",
+		'A'+slot, vcc/10, vcc%10, vpp/10, vcc%10);
+
+	/*
+	* Disable PCMCIA buffers (isolate the interface)
+	* and assert RESET signal
+	*/
+	debug ("Disable PCMCIA buffers and assert RESET\n");
+	reg  = PCMCIA_PGCRX(slot);
+	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg &= ~__MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	reg |= NSCU_GCRX_CXOE;			/* active low  */
+
+	PCMCIA_PGCRX(slot) = reg;
+	udelay(500);
+
+	debug ("PCMCIA power OFF\n");
+	power_config(slot);
+	power_off(slot);
+
+	switch(vcc) {
+		case  0: 			break;
+		case 33: power_on_3_3(slot);	break;
+		case 50: power_on_5_0(slot);	break;
+		default: 			goto done;
+	}
+
+	/* Checking supported voltages */
+
+	debug("PIPR: 0x%x --> %s\n", pcmp->pcmc_pipr,
+	       (pcmp->pcmc_pipr & 0x00008000) ? "only 5 V" : "can do 3.3V");
+
+	if (vcc)
+		debug("PCMCIA powered at %sV\n", (vcc == 50) ? "5.0" : "3.3");
+	else
+		debug("PCMCIA powered down\n");
+
+done:
+	debug("Enable PCMCIA buffers and stop RESET\n");
+	reg  =  PCMCIA_PGCRX(slot);
+	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
+	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
+	reg &= ~NSCU_GCRX_CXOE;			/* active low  */
+
+	PCMCIA_PGCRX(slot) = reg;
+	udelay(500);
+
+	debug("voltage_set: " PCMCIA_BOARD_MSG " Slot %c, DONE\n", slot+'A');
+#endif	/* CONFIG_NSCU */
+	return (0);
+}
+
+#endif	/* CONFIG_PCMCIA && (CONFIG_TQM8xxL || CONFIG_SVM_SC8xx) */
diff --git a/examples/Makefile b/examples/Makefile
index fee26741d0..a342d75062 100644
--- a/examples/Makefile
+++ b/examples/Makefile
@@ -42,7 +42,7 @@ LOAD_ADDR = 0x00800000 -L $(gcclibdir)/m32 -T nios.lds
 endif
 
 ifeq ($(ARCH),nios2)
-LOAD_ADDR = 0x00800000 -L $(gcclibdir) -T nios2.lds
+LOAD_ADDR = 0x02000000 -L $(gcclibdir) -T nios2.lds
 endif
 
 ifeq ($(ARCH),m68k)
diff --git a/examples/stubs.c b/examples/stubs.c
index 250a9af6e5..1caa575747 100644
--- a/examples/stubs.c
+++ b/examples/stubs.c
@@ -92,7 +92,7 @@ gd_t *global_data;
 #x ":\n"				\
 "	movhi	r8, %%hi(%0)\n"		\
 "	ori	r8, r0, %%lo(%0)\n"	\
-"	add	r8, r0, r15\n"		\
+"	add	r8, r8, r15\n"		\
 "	ldw	r8, 0(r8)\n"		\
 "	ldw	r8, %1(r8)\n"		\
 "	jmp	r8\n"			\
diff --git a/include/405_mal.h b/include/405_mal.h
index 69d20c98ff..0598586953 100644
--- a/include/405_mal.h
+++ b/include/405_mal.h
@@ -92,11 +92,21 @@
 #define MAL_ESR_PBEI	  0x00000001
       /* ^^			 ^^   */
       /* Mal IER		      */
+#ifdef CONFIG_440SPE
+#define MAL_IER_PT	  0x00000080
+#define MAL_IER_PRE	  0x00000040
+#define MAL_IER_PWE	  0x00000020
+#define MAL_IER_DE	  0x00000010
+#define MAL_IER_OTE	  0x00000004
+#define MAL_IER_OE	  0x00000002
+#define MAL_IER_PE	  0x00000001
+#else
 #define MAL_IER_DE	  0x00000010
 #define MAL_IER_NE	  0x00000008
 #define MAL_IER_TE	  0x00000004
 #define MAL_IER_OPBE	  0x00000002
 #define MAL_IER_PLBE	  0x00000001
+#endif
 
 /* MAL Channel Active Set and Reset Registers */
 #define MAL_TXRX_CASR	(0x80000000)
diff --git a/include/asm-m68k/immap_5282.h b/include/asm-m68k/immap_5282.h
index f2b77db871..6553b08696 100644
--- a/include/asm-m68k/immap_5282.h
+++ b/include/asm-m68k/immap_5282.h
@@ -13,7 +13,7 @@
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
@@ -25,39 +25,61 @@
 #ifndef __IMMAP_5282__
 #define __IMMAP_5282__
 
+struct sys_ctrl {
+	uint ipsbar;
+	char res1[4];
+	uint rambar;
+	char res2[4];
+	uchar crsr;
+	uchar cwcr;
+	uchar lpicr;
+	uchar cwsr;
+	uint dmareqc;
+	char res3[4];
+	uint mpark;
+
+    /* TODO: finish these */
+};
 
 /* Fast ethernet controller registers
  */
 typedef struct fec {
-	uint	fec_ecntrl;		/* ethernet control register		*/
-	uint	fec_ievent;		/* interrupt event register		*/
-	uint	fec_imask;		/* interrupt mask register		*/
-	uint	fec_ivec;		/* interrupt level and vector status	*/
-	uint	fec_r_des_active;	/* Rx ring updated flag			*/
-	uint	fec_x_des_active;	/* Tx ring updated flag			*/
-	uint	res3[10];		/* reserved				*/
-	uint	fec_mii_data;		/* MII data register			*/
-	uint	fec_mii_speed;		/* MII speed control register		*/
-	uint	res4[17];		/* reserved				*/
-	uint	fec_r_bound;		/* end of RAM (read-only)		*/
-	uint	fec_r_fstart;		/* Rx FIFO start address		*/
-	uint	res5[6];		/* reserved				*/
-	uint	fec_x_fstart;		/* Tx FIFO start address		*/
-	uint	res7[21];		/* reserved				*/
-	uint	fec_r_cntrl;		/* Rx control register			*/
-	uint	fec_r_hash;		/* Rx hash register			*/
-	uint	res8[14];		/* reserved				*/
-	uint	fec_x_cntrl;		/* Tx control register			*/
-	uint	res9[0x9e];		/* reserved				*/
-	uint	fec_addr_low;		/* lower 32 bits of station address	*/
-	uint	fec_addr_high;		/* upper 16 bits of station address	*/
-	uint	fec_hash_table_high;	/* upper 32-bits of hash table		*/
-	uint	fec_hash_table_low;	/* lower 32-bits of hash table		*/
-	uint	fec_r_des_start;	/* beginning of Rx descriptor ring	*/
-	uint	fec_x_des_start;	/* beginning of Tx descriptor ring	*/
-	uint	fec_r_buff_size;	/* Rx buffer size			*/
-	uint	res2[9];		/* reserved				*/
-	uchar	fec_fifo[960];		/* fifo RAM				*/
+	uint	res1;		/* reserved			1000*/
+	uint	fec_ievent;	/* interrupt event register	1004*/	/* EIR */
+	uint	fec_imask;	/* interrupt mask register	1008*/	/* EIMR */
+	uint	res2;		/* reserved			100c*/
+	uint	fec_r_des_active;    /* Rx ring updated flag	1010*/	/* RDAR */
+	uint	fec_x_des_active;    /* Tx ring updated flag	1014*/	/* XDAR */
+	uint	res3[3];	/* reserved			1018*/
+	uint	fec_ecntrl;	/* ethernet control register	1024*/	/* ECR */
+	uint	res4[6];	/* reserved			1028*/
+	uint	fec_mii_data;	/* MII data register		1040*/	/* MDATA */
+	uint	fec_mii_speed;	/* MII speed control register	1044*/	/* MSCR */
+				      /*1044*/
+	uint	res5[7];	/* reserved			1048*/
+	uint	fec_mibc;	/* MIB Control/Status register	1064*/ /* MIBC */
+	uint	res6[7];	/* reserved			1068*/
+	uint	fec_r_cntrl;	/* Rx control register		1084*/	/* RCR */
+	uint	res7[15];	/* reserved			1088*/
+	uint	fec_x_cntrl;	/* Tx control register		10C4*/	/* TCR */
+	uint	res8[7];	/* reserved			10C8*/
+	uint	fec_addr_low;	/* lower 32 bits of station address */	/* PALR */
+	uint	fec_addr_high;	/* upper 16 bits of station address  */ /* PAUR */
+	uint	fec_opd;	/* opcode + pause duration	10EC*/	/* OPD */
+	uint	res9[10];	/* reserved			10F0*/
+	uint	fec_ihash_table_high;	/* upper 32-bits of individual hash */ /* IAUR */
+	uint	fec_ihash_table_low;	/* lower 32-bits of individual hash */ /* IALR */
+	uint	fec_ghash_table_high;	/* upper 32-bits of group hash	*/ /* GAUR */
+	uint	fec_ghash_table_low;	/* lower 32-bits of group hash	*/ /* GALR */
+	uint	res10[7];	/* reserved			1128*/
+	uint	fec_tfwr;	/* Transmit FIFO watermark	1144*/	/* TFWR */
+	uint	res11;		/* reserved			1148*/
+	uint	fec_r_bound;	/* FIFO Receive Bound Register = end of */ /* FRBR */
+	uint	fec_r_fstart;	/* FIFO Receive FIfo Start Registers =	*/ /* FRSR */
+	uint	res12[11];	/* reserved			1154*/
+	uint	fec_r_des_start;/* beginning of Rx descriptor ring    1180*/ /* ERDSR */
+	uint	fec_x_des_start;/* beginning of Tx descriptor ring    1184*/ /* ETDSR */
+	uint	fec_r_buff_size;/* Rx buffer size		1188*/	/* EMRBR */
 } fec_t;
 
 #endif /* __IMMAP_5282__ */
diff --git a/include/asm-m68k/m5282.h b/include/asm-m68k/m5282.h
index 073b0bc790..e5058a46aa 100644
--- a/include/asm-m68k/m5282.h
+++ b/include/asm-m68k/m5282.h
@@ -1,9 +1,6 @@
 /*
  * mcf5282.h -- Definitions for Motorola Coldfire 5282
  *
- * Based on mcf5282sim.h of uCLinux distribution:
- *      (C) Copyright 1999, Greg Ungerer (gerg@snapgear.com)
- *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
@@ -34,27 +31,515 @@
 
 #define INT_RAM_SIZE	65536
 
+/* General Purpose I/O Module GPIO */
 
-/*
- *	Define the 5282 SIM register set addresses.
- */
-#define	MCFICM_INTC0		0x0c00		/* Base for Interrupt Ctrl 0 */
-#define	MCFICM_INTC1		0x0d00		/* Base for Interrupt Ctrl 0 */
-#define	MCFINTC_IPRH		0x00		/* Interrupt pending 32-63 */
-#define	MCFINTC_IPRL		0x04		/* Interrupt pending 1-31 */
-#define	MCFINTC_IMRH		0x08		/* Interrupt mask 32-63 */
-#define	MCFINTC_IMRL		0x0c		/* Interrupt mask 1-31 */
-#define	MCFINTC_INTFRCH		0x10		/* Interrupt force 32-63 */
-#define	MCFINTC_INTFRCL		0x14		/* Interrupt force 1-31 */
-#define	MCFINTC_IRLR		0x18		/* */
-#define	MCFINTC_IACKL		0x19		/* */
-#define	MCFINTC_ICR0		0x40		/* Base ICR register */
-
-#define	MCFINT_UART0		13		/* Interrupt number for UART0 */
-#define	MCFINT_PIT1		55		/* Interrupt number for PIT1 */
-
-#define	MCF5282_GPIO_PUAPAR	0x10005C
+#define MCFGPIO_PORTA		(*(vu_char *) (CFG_MBAR+0x100000))
+#define MCFGPIO_PORTB		(*(vu_char *) (CFG_MBAR+0x100001))
+#define MCFGPIO_PORTC		(*(vu_char *) (CFG_MBAR+0x100002))
+#define MCFGPIO_PORTD		(*(vu_char *) (CFG_MBAR+0x100003))
+#define MCFGPIO_PORTE		(*(vu_char *) (CFG_MBAR+0x100004))
+#define MCFGPIO_PORTF		(*(vu_char *) (CFG_MBAR+0x100005))
+#define MCFGPIO_PORTG		(*(vu_char *) (CFG_MBAR+0x100006))
+#define MCFGPIO_PORTH		(*(vu_char *) (CFG_MBAR+0x100007))
+#define MCFGPIO_PORTJ		(*(vu_char *) (CFG_MBAR+0x100008))
+#define MCFGPIO_PORTDD		(*(vu_char *) (CFG_MBAR+0x100009))
+#define MCFGPIO_PORTEH		(*(vu_char *) (CFG_MBAR+0x10000A))
+#define MCFGPIO_PORTEL		(*(vu_char *) (CFG_MBAR+0x10000B))
+#define MCFGPIO_PORTAS		(*(vu_char *) (CFG_MBAR+0x10000C))
+#define MCFGPIO_PORTQS		(*(vu_char *) (CFG_MBAR+0x10000D))
+#define MCFGPIO_PORTSD		(*(vu_char *) (CFG_MBAR+0x10000E))
+#define MCFGPIO_PORTTC		(*(vu_char *) (CFG_MBAR+0x10000F))
+#define MCFGPIO_PORTTD		(*(vu_char *) (CFG_MBAR+0x100010))
+#define MCFGPIO_PORTUA		(*(vu_char *) (CFG_MBAR+0x100011))
+
+#define MCFGPIO_DDRA		(*(vu_char *) (CFG_MBAR+0x100014))
+#define MCFGPIO_DDRB		(*(vu_char *) (CFG_MBAR+0x100015))
+#define MCFGPIO_DDRC		(*(vu_char *) (CFG_MBAR+0x100016))
+#define MCFGPIO_DDRD		(*(vu_char *) (CFG_MBAR+0x100017))
+#define MCFGPIO_DDRE		(*(vu_char *) (CFG_MBAR+0x100018))
+#define MCFGPIO_DDRF		(*(vu_char *) (CFG_MBAR+0x100019))
+#define MCFGPIO_DDRG		(*(vu_char *) (CFG_MBAR+0x10001A))
+#define MCFGPIO_DDRH		(*(vu_char *) (CFG_MBAR+0x10001B))
+#define MCFGPIO_DDRJ		(*(vu_char *) (CFG_MBAR+0x10001C))
+#define MCFGPIO_DDRDD		(*(vu_char *) (CFG_MBAR+0x10001D))
+#define MCFGPIO_DDREH		(*(vu_char *) (CFG_MBAR+0x10001E))
+#define MCFGPIO_DDREL		(*(vu_char *) (CFG_MBAR+0x10001F))
+#define MCFGPIO_DDRAS		(*(vu_char *) (CFG_MBAR+0x100020))
+#define MCFGPIO_DDRQS		(*(vu_char *) (CFG_MBAR+0x100021))
+#define MCFGPIO_DDRSD		(*(vu_char *) (CFG_MBAR+0x100022))
+#define MCFGPIO_DDRTC		(*(vu_char *) (CFG_MBAR+0x100023))
+#define MCFGPIO_DDRTD		(*(vu_char *) (CFG_MBAR+0x100024))
+#define MCFGPIO_DDRUA		(*(vu_char *) (CFG_MBAR+0x100025))
+
+#define MCFGPIO_PORTAP		(*(vu_char *) (CFG_MBAR+0x100028))
+#define MCFGPIO_PORTBP		(*(vu_char *) (CFG_MBAR+0x100029))
+#define MCFGPIO_PORTCP		(*(vu_char *) (CFG_MBAR+0x10002A))
+#define MCFGPIO_PORTDP		(*(vu_char *) (CFG_MBAR+0x10002B))
+#define MCFGPIO_PORTEP		(*(vu_char *) (CFG_MBAR+0x10002C))
+#define MCFGPIO_PORTFP		(*(vu_char *) (CFG_MBAR+0x10002D))
+#define MCFGPIO_PORTGP		(*(vu_char *) (CFG_MBAR+0x10002E))
+#define MCFGPIO_PORTHP		(*(vu_char *) (CFG_MBAR+0x10002F))
+#define MCFGPIO_PORTJP		(*(vu_char *) (CFG_MBAR+0x100030))
+#define MCFGPIO_PORTDDP		(*(vu_char *) (CFG_MBAR+0x100031))
+#define MCFGPIO_PORTEHP		(*(vu_char *) (CFG_MBAR+0x100032))
+#define MCFGPIO_PORTELP		(*(vu_char *) (CFG_MBAR+0x100033))
+#define MCFGPIO_PORTASP		(*(vu_char *) (CFG_MBAR+0x100034))
+#define MCFGPIO_PORTQSP		(*(vu_char *) (CFG_MBAR+0x100035))
+#define MCFGPIO_PORTSDP		(*(vu_char *) (CFG_MBAR+0x100036))
+#define MCFGPIO_PORTTCP		(*(vu_char *) (CFG_MBAR+0x100037))
+#define MCFGPIO_PORTTDP		(*(vu_char *) (CFG_MBAR+0x100038))
+#define MCFGPIO_PORTUAP		(*(vu_char *) (CFG_MBAR+0x100039))
+
+#define MCFGPIO_SETA		(*(vu_char *) (CFG_MBAR+0x100028))
+#define MCFGPIO_SETB		(*(vu_char *) (CFG_MBAR+0x100029))
+#define MCFGPIO_SETC		(*(vu_char *) (CFG_MBAR+0x10002A))
+#define MCFGPIO_SETD		(*(vu_char *) (CFG_MBAR+0x10002B))
+#define MCFGPIO_SETE		(*(vu_char *) (CFG_MBAR+0x10002C))
+#define MCFGPIO_SETF		(*(vu_char *) (CFG_MBAR+0x10002D))
+#define MCFGPIO_SETG   		(*(vu_char *) (CFG_MBAR+0x10002E))
+#define MCFGPIO_SETH   		(*(vu_char *) (CFG_MBAR+0x10002F))
+#define MCFGPIO_SETJ   		(*(vu_char *) (CFG_MBAR+0x100030))
+#define MCFGPIO_SETDD  		(*(vu_char *) (CFG_MBAR+0x100031))
+#define MCFGPIO_SETEH  		(*(vu_char *) (CFG_MBAR+0x100032))
+#define MCFGPIO_SETEL  		(*(vu_char *) (CFG_MBAR+0x100033))
+#define MCFGPIO_SETAS  		(*(vu_char *) (CFG_MBAR+0x100034))
+#define MCFGPIO_SETQS  		(*(vu_char *) (CFG_MBAR+0x100035))
+#define MCFGPIO_SETSD  		(*(vu_char *) (CFG_MBAR+0x100036))
+#define MCFGPIO_SETTC  		(*(vu_char *) (CFG_MBAR+0x100037))
+#define MCFGPIO_SETTD  		(*(vu_char *) (CFG_MBAR+0x100038))
+#define MCFGPIO_SETUA  		(*(vu_char *) (CFG_MBAR+0x100039))
+
+#define MCFGPIO_CLRA  		(*(vu_char *) (CFG_MBAR+0x10003C))
+#define MCFGPIO_CLRB  		(*(vu_char *) (CFG_MBAR+0x10003D))
+#define MCFGPIO_CLRC  		(*(vu_char *) (CFG_MBAR+0x10003E))
+#define MCFGPIO_CLRD  		(*(vu_char *) (CFG_MBAR+0x10003F))
+#define MCFGPIO_CLRE  		(*(vu_char *) (CFG_MBAR+0x100040))
+#define MCFGPIO_CLRF  		(*(vu_char *) (CFG_MBAR+0x100041))
+#define MCFGPIO_CLRG  		(*(vu_char *) (CFG_MBAR+0x100042))
+#define MCFGPIO_CLRH  		(*(vu_char *) (CFG_MBAR+0x100043))
+#define MCFGPIO_CLRJ  		(*(vu_char *) (CFG_MBAR+0x100044))
+#define MCFGPIO_CLRDD  		(*(vu_char *) (CFG_MBAR+0x100045))
+#define MCFGPIO_CLREH  		(*(vu_char *) (CFG_MBAR+0x100046))
+#define MCFGPIO_CLREL  		(*(vu_char *) (CFG_MBAR+0x100047))
+#define MCFGPIO_CLRAS  		(*(vu_char *) (CFG_MBAR+0x100048))
+#define MCFGPIO_CLRQS  		(*(vu_char *) (CFG_MBAR+0x100049))
+#define MCFGPIO_CLRSD  		(*(vu_char *) (CFG_MBAR+0x10004A))
+#define MCFGPIO_CLRTC  		(*(vu_char *) (CFG_MBAR+0x10004B))
+#define MCFGPIO_CLRTD  		(*(vu_char *) (CFG_MBAR+0x10004C))
+#define MCFGPIO_CLRUA  		(*(vu_char *) (CFG_MBAR+0x10004D))
+
+#define MCFGPIO_PBCDPAR  	(*(vu_char *) (CFG_MBAR+0x100050))
+#define MCFGPIO_PFPAR  		(*(vu_char *) (CFG_MBAR+0x100051))
+#define MCFGPIO_PEPAR  		(*(vu_short *)(CFG_MBAR+0x100052))
+#define MCFGPIO_PJPAR  		(*(vu_char *) (CFG_MBAR+0x100054))
+#define MCFGPIO_PSDPAR  	(*(vu_char *) (CFG_MBAR+0x100055))
+#define MCFGPIO_PASPAR  	(*(vu_short *)(CFG_MBAR+0x100056))
+#define MCFGPIO_PEHLPAR  	(*(vu_char *) (CFG_MBAR+0x100058))
+#define MCFGPIO_PQSPAR  	(*(vu_char *) (CFG_MBAR+0x100059))
+#define MCFGPIO_PTCPAR  	(*(vu_char *) (CFG_MBAR+0x10005A))
+#define MCFGPIO_PTDPAR  	(*(vu_char *) (CFG_MBAR+0x10005B))
+#define MCFGPIO_PUAPAR  	(*(vu_char *) (CFG_MBAR+0x10005C))
+
+/* Bit level definitions and macros */
+#define MCFGPIO_PORT7			(0x80)
+#define MCFGPIO_PORT6			(0x40)
+#define MCFGPIO_PORT5			(0x20)
+#define MCFGPIO_PORT4			(0x10)
+#define MCFGPIO_PORT3			(0x08)
+#define MCFGPIO_PORT2			(0x04)
+#define MCFGPIO_PORT1			(0x02)
+#define MCFGPIO_PORT0			(0x01)
+#define MCFGPIO_PORT(x)			(0x01<<x)
+
+#define MCFGPIO_DDR7			(0x80)
+#define MCFGPIO_DDR6			(0x40)
+#define MCFGPIO_DDR5			(0x20)
+#define MCFGPIO_DDR4			(0x10)
+#define MCFGPIO_DDR3			(0x08)
+#define MCFGPIO_DDR2			(0x04)
+#define MCFGPIO_DDR1			(0x02)
+#define MCFGPIO_DDR0			(0x01)
+#define MCFGPIO_DDR(x)			(0x01<<x)
+
+#define MCFGPIO_Px7			(0x80)
+#define MCFGPIO_Px6			(0x40)
+#define MCFGPIO_Px5			(0x20)
+#define MCFGPIO_Px4			(0x10)
+#define MCFGPIO_Px3			(0x08)
+#define MCFGPIO_Px2			(0x04)
+#define MCFGPIO_Px1			(0x02)
+#define MCFGPIO_Px0			(0x01)
+#define MCFGPIO_Px(x)			(0x01<<x)
+
+
+#define MCFGPIO_PBCDPAR_PBPA		(0x80)
+#define MCFGPIO_PBCDPAR_PCDPA		(0x40)
+
+#define MCFGPIO_PEPAR_PEPA7		(0x4000)
+#define MCFGPIO_PEPAR_PEPA6		(0x1000)
+#define MCFGPIO_PEPAR_PEPA5		(0x0400)
+#define MCFGPIO_PEPAR_PEPA4		(0x0100)
+#define MCFGPIO_PEPAR_PEPA3		(0x0040)
+#define MCFGPIO_PEPAR_PEPA2		(0x0010)
+#define MCFGPIO_PEPAR_PEPA1(x)		(((x)&0x3)<<2)
+#define MCFGPIO_PEPAR_PEPA0(x)		(((x)&0x3))
+
+#define MCFGPIO_PFPAR_PFPA7		(0x80)
+#define MCFGPIO_PFPAR_PFPA6		(0x40)
+#define MCFGPIO_PFPAR_PFPA5		(0x20)
+
+#define MCFGPIO_PJPAR_PJPA7		(0x80)
+#define MCFGPIO_PJPAR_PJPA6		(0x40)
+#define MCFGPIO_PJPAR_PJPA5		(0x20)
+#define MCFGPIO_PJPAR_PJPA4		(0x10)
+#define MCFGPIO_PJPAR_PJPA3		(0x08)
+#define MCFGPIO_PJPAR_PJPA2		(0x04)
+#define MCFGPIO_PJPAR_PJPA1		(0x02)
+#define MCFGPIO_PJPAR_PJPA0		(0x01)
+#define MCFGPIO_PJPAR_PJPA(x)		(0x01<<x)
+
+#define MCFGPIO_PSDPAR_PSDPA		(0x80)
+
+#define MCFGPIO_PASPAR_PASPA5(x)	(((x)&0x3)<<10)
+#define MCFGPIO_PASPAR_PASPA4(x)	(((x)&0x3)<<8)
+#define MCFGPIO_PASPAR_PASPA3(x)	(((x)&0x3)<<6)
+#define MCFGPIO_PASPAR_PASPA2(x)	(((x)&0x3)<<4)
+#define MCFGPIO_PASPAR_PASPA1(x)	(((x)&0x3)<<2)
+#define MCFGPIO_PASPAR_PASPA0(x)	(((x)&0x3))
+
+#define MCFGPIO_PEHLPAR_PEHPA		(0x80)
+#define MCFGPIO_PEHLPAR_PELPA		(0x40)
+
+#define MCFGPIO_PQSPAR_PQSPA6		(0x40)
+#define MCFGPIO_PQSPAR_PQSPA5		(0x20)
+#define MCFGPIO_PQSPAR_PQSPA4		(0x10)
+#define MCFGPIO_PQSPAR_PQSPA3		(0x08)
+#define MCFGPIO_PQSPAR_PQSPA2		(0x04)
+#define MCFGPIO_PQSPAR_PQSPA1		(0x02)
+#define MCFGPIO_PQSPAR_PQSPA0		(0x01)
+#define MCFGPIO_PQSPAR_PQSPA(x)		(0x01<<x)
+
+#define MCFGPIO_PTCPAR_PTCPA3(x)	(((x)&0x3)<<6)
+#define MCFGPIO_PTCPAR_PTCPA2(x)	(((x)&0x3)<<4)
+#define MCFGPIO_PTCPAR_PTCPA1(x)	(((x)&0x3)<<2)
+#define MCFGPIO_PTCPAR_PTCPA0(x)	(((x)&0x3))
+
+#define MCFGPIO_PTDPAR_PTDPA3(x)	(((x)&0x3)<<6)
+#define MCFGPIO_PTDPAR_PTDPA2(x)	(((x)&0x3)<<4)
+#define MCFGPIO_PTDPAR_PTDPA1(x)	(((x)&0x3)<<2)
+#define MCFGPIO_PTDPAR_PTDPA0(x)	(((x)&0x3))
+
+#define MCFGPIO_PUAPAR_PUAPA3		(0x08)
+#define MCFGPIO_PUAPAR_PUAPA2		(0x04)
+#define MCFGPIO_PUAPAR_PUAPA1		(0x02)
+#define MCFGPIO_PUAPAR_PUAPA0		(0x01)
+
+/* System Conrol Module SCM */
+
+#define MCFSCM_RAMBAR           (*(vu_long *) (CFG_MBAR+0x00000008))
+#define MCFSCM_CRSR		(*(vu_char *) (CFG_MBAR+0x00000010))
+#define MCFSCM_CWCR		(*(vu_char *) (CFG_MBAR+0x00000011))
+#define MCFSCM_LPICR		(*(vu_char *) (CFG_MBAR+0x00000012))
+#define MCFSCM_CWSR		(*(vu_char *) (CFG_MBAR+0x00000013))
+
+#define MCFSCM_MPARK		(*(vu_long *) (CFG_MBAR+0x0000001C))
+#define MCFSCM_MPR		(*(vu_char *) (CFG_MBAR+0x00000020))
+#define MCFSCM_PACR0		(*(vu_char *) (CFG_MBAR+0x00000024))
+#define MCFSCM_PACR1		(*(vu_char *) (CFG_MBAR+0x00000025))
+#define MCFSCM_PACR2		(*(vu_char *) (CFG_MBAR+0x00000026))
+#define MCFSCM_PACR3		(*(vu_char *) (CFG_MBAR+0x00000027))
+#define MCFSCM_PACR4		(*(vu_char *) (CFG_MBAR+0x00000028))
+#define MCFSCM_PACR5		(*(vu_char *) (CFG_MBAR+0x0000002A))
+#define MCFSCM_PACR6		(*(vu_char *) (CFG_MBAR+0x0000002B))
+#define MCFSCM_PACR7		(*(vu_char *) (CFG_MBAR+0x0000002C))
+#define MCFSCM_PACR8		(*(vu_char *) (CFG_MBAR+0x0000002E))
+#define MCFSCM_GPACR0		(*(vu_char *) (CFG_MBAR+0x00000030))
+#define MCFSCM_GPACR1		(*(vu_char *) (CFG_MBAR+0x00000031))
+
+
+#define MCFSCM_CRSR_EXT		(0x80)
+#define MCFSCM_CRSR_CWDR	(0x20)
+#define MCFSCM_RAMBAR_BA(x)     ((x)&0xFFFF0000)
+#define MCFSCM_RAMBAR_BDE       (0x00000200)
+
+/* Reset Controller Module RCM */
+
+#define MCFRESET_RCR		(*(vu_char *) (CFG_MBAR+0x00110000))
+#define MCFRESET_RSR		(*(vu_char *) (CFG_MBAR+0x00110001))
+
+#define MCFRESET_RCR_SOFTRST    (0x80)
+#define MCFRESET_RCR_FRCRSTOUT  (0x40)
+#define MCFRESET_RCR_LVDF       (0x10)
+#define MCFRESET_RCR_LVDIE      (0x08)
+#define MCFRESET_RCR_LVDRE      (0x04)
+#define MCFRESET_RCR_LVDE       (0x01)
+
+#define MCFRESET_RSR_LVD        (0x40)
+#define MCFRESET_RSR_SOFT       (0x20)
+#define MCFRESET_RSR_WDR        (0x10)
+#define MCFRESET_RSR_POR        (0x08)
+#define MCFRESET_RSR_EXT        (0x04)
+#define MCFRESET_RSR_LOC        (0x02)
+#define MCFRESET_RSR_LOL        (0x01)
+#define MCFRESET_RSR_ALL        (0x7F)
+#define MCFRESET_RCR_SOFTRST    (0x80)
+#define MCFRESET_RCR_FRCRSTOUT  (0x40)
+
+/* Chip Configuration Module CCM */
+
+#define MCFCCM_CCR		(*(vu_short *)(CFG_MBAR+0x00110004))
+#define MCFCCM_RCON		(*(vu_short *)(CFG_MBAR+0x00110008))
+#define MCFCCM_CIR		(*(vu_short *)(CFG_MBAR+0x0011000A))
+
+
+/* Bit level definitions and macros */
+#define MCFCCM_CCR_LOAD			(0x8000)
+#define MCFCCM_CCR_MODE(x) 		(((x)&0x0007)<<8)
+#define MCFCCM_CCR_SZEN    		(0x0040)
+#define MCFCCM_CCR_PSTEN   		(0x0020)
+#define MCFCCM_CCR_BME			(0x0008)
+#define MCFCCM_CCR_BMT(x)  		(((x)&0x0007))
+
+#define MCFCCM_CIR_PIN_MASK		(0xFF00)
+#define MCFCCM_CIR_PRN_MASK		(0x00FF)
+
+/* Clock Module */
+
+#define MCFCLOCK_SYNCR          (*(vu_short *)(CFG_MBAR+0x120000))
+#define MCFCLOCK_SYNSR          (*(vu_char *) (CFG_MBAR+0x120002))
+
+#define MCFCLOCK_SYNCR_MFD(x)   (((x)&0x0007)<<12)
+#define MCFCLOCK_SYNCR_RFD(x)   (((x)&0x0007)<<8)
+#define MCFCLOCK_SYNSR_LOCK     0x08
+
+#define MCFSDRAMC_DCR		(*(vu_short *)(CFG_MBAR+0x00000040))
+#define MCFSDRAMC_DACR0		(*(vu_long *) (CFG_MBAR+0x00000048))
+#define MCFSDRAMC_DMR0		(*(vu_long *) (CFG_MBAR+0x0000004c))
+#define MCFSDRAMC_DACR1		(*(vu_long *) (CFG_MBAR+0x00000050))
+#define MCFSDRAMC_DMR1		(*(vu_long *) (CFG_MBAR+0x00000054))
+
+#define MCFSDRAMC_DCR_NAM	(0x2000)
+#define MCFSDRAMC_DCR_COC	(0x1000)
+#define MCFSDRAMC_DCR_IS	(0x0800)
+#define MCFSDRAMC_DCR_RTIM_3	(0x0000)
+#define MCFSDRAMC_DCR_RTIM_6	(0x0200)
+#define MCFSDRAMC_DCR_RTIM_9	(0x0400)
+#define MCFSDRAMC_DCR_RC(x)	((x)&0x01FF)
+
+#define MCFSDRAMC_DACR_BASE(x)	((x)&0xFFFC0000)
+#define MCFSDRAMC_DACR_RE	(0x00008000)
+#define MCFSDRAMC_DACR_CASL(x)	(((x)&0x03)<<12)
+#define MCFSDRAMC_DACR_CBM(x)	(((x)&0x07)<<8)
+#define MCFSDRAMC_DACR_PS_32	(0x00000000)
+#define MCFSDRAMC_DACR_PS_16	(0x00000020)
+#define MCFSDRAMC_DACR_PS_8	(0x00000010)
+#define MCFSDRAMC_DACR_IP	(0x00000008)
+#define MCFSDRAMC_DACR_IMRS	(0x00000040)
+
+#define MCFSDRAMC_DMR_BAM_16M	(0x00FC0000)
+#define MCFSDRAMC_DMR_WP        (0x00000100)
+#define MCFSDRAMC_DMR_CI        (0x00000040)
+#define MCFSDRAMC_DMR_AM        (0x00000020)
+#define MCFSDRAMC_DMR_SC        (0x00000010)
+#define MCFSDRAMC_DMR_SD        (0x00000008)
+#define MCFSDRAMC_DMR_UC        (0x00000004)
+#define MCFSDRAMC_DMR_UD        (0x00000002)
+#define MCFSDRAMC_DMR_V         (0x00000001)
+
+#define MCFWTM_WCR              (*(vu_short *)(CFG_MBAR+0x00140000))
+#define MCFWTM_WMR              (*(vu_short *)(CFG_MBAR+0x00140002))
+#define MCFWTM_WCNTR            (*(vu_short *)(CFG_MBAR+0x00140004))
+#define MCFWTM_WSR              (*(vu_short *)(CFG_MBAR+0x00140006))
+
+/*  Chip SELECT Module CSM */
+#define MCFCSM_CSAR0		(*(vu_short *)(CFG_MBAR+0x00000080))
+#define MCFCSM_CSMR0		(*(vu_long *) (CFG_MBAR+0x00000084))
+#define MCFCSM_CSCR0		(*(vu_short *)(CFG_MBAR+0x0000008a))
+#define MCFCSM_CSAR1		(*(vu_short *)(CFG_MBAR+0x0000008C))
+#define MCFCSM_CSMR1		(*(vu_long *) (CFG_MBAR+0x00000090))
+#define MCFCSM_CSCR1		(*(vu_short *)(CFG_MBAR+0x00000096))
+#define MCFCSM_CSAR2		(*(vu_short *)(CFG_MBAR+0x00000098))
+#define MCFCSM_CSMR2		(*(vu_long *) (CFG_MBAR+0x0000009C))
+#define MCFCSM_CSCR2		(*(vu_short *)(CFG_MBAR+0x000000A2))
+#define MCFCSM_CSAR3		(*(vu_short *)(CFG_MBAR+0x000000A4))
+#define MCFCSM_CSMR3		(*(vu_long *) (CFG_MBAR+0x000000A8))
+#define MCFCSM_CSCR3		(*(vu_short *)(CFG_MBAR+0x000000AE))
+
+#define MCFCSM_CSMR_BAM(x)	((x) & 0xFFFF0000)
+#define MCFCSM_CSMR_WP		(1<<8)
+#define MCFCSM_CSMR_V		(0x01)
+#define MCFCSM_CSCR_WS(x)	((x & 0x0F)<<10)
+#define MCFCSM_CSCR_AA		(0x0100)
+#define MCFCSM_CSCR_PS_32	(0x0000)
+#define MCFCSM_CSCR_PS_8	(0x0040)
+#define MCFCSM_CSCR_PS_16	(0x0080)
+
+/*********************************************************************
+*
+* General Purpose Timer (GPT) Module
+*
+*********************************************************************/
+
+#define MCFGPTA_GPTIOS		(*(vu_char *)(CFG_MBAR+0x1A0000))
+#define MCFGPTA_GPTCFORC	(*(vu_char *)(CFG_MBAR+0x1A0001))
+#define MCFGPTA_GPTOC3M		(*(vu_char *)(CFG_MBAR+0x1A0002))
+#define MCFGPTA_GPTOC3D		(*(vu_char *)(CFG_MBAR+0x1A0003))
+#define MCFGPTA_GPTCNT		(*(vu_short *)(CFG_MBAR+0x1A0004))
+#define MCFGPTA_GPTSCR1		(*(vu_char *)(CFG_MBAR+0x1A0006))
+#define MCFGPTA_GPTTOV		(*(vu_char *)(CFG_MBAR+0x1A0008))
+#define MCFGPTA_GPTCTL1		(*(vu_char *)(CFG_MBAR+0x1A0009))
+#define MCFGPTA_GPTCTL2		(*(vu_char *)(CFG_MBAR+0x1A000B))
+#define MCFGPTA_GPTIE		(*(vu_char *)(CFG_MBAR+0x1A000C))
+#define MCFGPTA_GPTSCR2		(*(vu_char *)(CFG_MBAR+0x1A000D))
+#define MCFGPTA_GPTFLG1		(*(vu_char *)(CFG_MBAR+0x1A000E))
+#define MCFGPTA_GPTFLG2		(*(vu_char *)(CFG_MBAR+0x1A000F))
+#define MCFGPTA_GPTC0		(*(vu_short *)(CFG_MBAR+0x1A0010))
+#define MCFGPTA_GPTC1		(*(vu_short *)(CFG_MBAR+0x1A0012))
+#define MCFGPTA_GPTC2		(*(vu_short *)(CFG_MBAR+0x1A0014))
+#define MCFGPTA_GPTC3		(*(vu_short *)(CFG_MBAR+0x1A0016))
+#define MCFGPTA_GPTPACTL	(*(vu_char *)(CFG_MBAR+0x1A0018))
+#define MCFGPTA_GPTPAFLG	(*(vu_char *)(CFG_MBAR+0x1A0019))
+#define MCFGPTA_GPTPACNT	(*(vu_short *)(CFG_MBAR+0x1A001A))
+#define MCFGPTA_GPTPORT		(*(vu_char *)(CFG_MBAR+0x1A001D))
+#define MCFGPTA_GPTDDR		(*(vu_char *)(CFG_MBAR+0x1A001E))
+
+
+#define MCFGPTB_GPTIOS		(*(vu_char *)(CFG_MBAR+0x1B0000))
+#define MCFGPTB_GPTCFORC	(*(vu_char *)(CFG_MBAR+0x1B0001))
+#define MCFGPTB_GPTOC3M		(*(vu_char *)(CFG_MBAR+0x1B0002))
+#define MCFGPTB_GPTOC3D		(*(vu_char *)(CFG_MBAR+0x1B0003))
+#define MCFGPTB_GPTCNT		(*(vu_short *)(CFG_MBAR+0x1B0004))
+#define MCFGPTB_GPTSCR1		(*(vu_char *)(CFG_MBAR+0x1B0006))
+#define MCFGPTB_GPTTOV		(*(vu_char *)(CFG_MBAR+0x1B0008))
+#define MCFGPTB_GPTCTL1		(*(vu_char *)(CFG_MBAR+0x1B0009))
+#define MCFGPTB_GPTCTL2		(*(vu_char *)(CFG_MBAR+0x1B000B))
+#define MCFGPTB_GPTIE		(*(vu_char *)(CFG_MBAR+0x1B000C))
+#define MCFGPTB_GPTSCR2		(*(vu_char *)(CFG_MBAR+0x1B000D))
+#define MCFGPTB_GPTFLG1		(*(vu_char *)(CFG_MBAR+0x1B000E))
+#define MCFGPTB_GPTFLG2		(*(vu_char *)(CFG_MBAR+0x1B000F))
+#define MCFGPTB_GPTC0		(*(vu_short *)(CFG_MBAR+0x1B0010))
+#define MCFGPTB_GPTC1		(*(vu_short *)(CFG_MBAR+0x1B0012))
+#define MCFGPTB_GPTC2		(*(vu_short *)(CFG_MBAR+0x1B0014))
+#define MCFGPTB_GPTC3		(*(vu_short *)(CFG_MBAR+0x1B0016))
+#define MCFGPTB_GPTPACTL	(*(vu_char *)(CFG_MBAR+0x1B0018))
+#define MCFGPTB_GPTPAFLG	(*(vu_char *)(CFG_MBAR+0x1B0019))
+#define MCFGPTB_GPTPACNT	(*(vu_short *)(CFG_MBAR+0x1B001A))
+#define MCFGPTB_GPTPORT		(*(vu_char *)(CFG_MBAR+0x1B001D))
+#define MCFGPTB_GPTDDR		(*(vu_char *)(CFG_MBAR+0x1B001E))
+
+/* Bit level definitions and macros */
+#define MCFGPT_GPTIOS_IOS3		(0x08)
+#define MCFGPT_GPTIOS_IOS2		(0x04)
+#define MCFGPT_GPTIOS_IOS1		(0x02)
+#define MCFGPT_GPTIOS_IOS0		(0x01)
+
+#define MCFGPT_GPTCFORC_FOC3		(0x08)
+#define MCFGPT_GPTCFORC_FOC2		(0x04)
+#define MCFGPT_GPTCFORC_FOC1		(0x02)
+#define MCFGPT_GPTCFORC_FOC0		(0x01)
+
+#define MCFGPT_GPTOC3M_OC3M3		(0x08)
+#define MCFGPT_GPTOC3M_OC3M2		(0x04)
+#define MCFGPT_GPTOC3M_OC3M1		(0x02)
+#define MCFGPT_GPTOC3M_OC3M0		(0x01)
+
+#define MCFGPT_GPTOC3M_OC3D(x)		(((x)&0x04))
+
+#define MCFGPT_GPTSCR1_GPTEN		(0x80)
+#define MCFGPT_GPTSCR1_TFFCA		(0x10)
+
+#define MCFGPT_GPTTOV3			(0x08)
+#define MCFGPT_GPTTOV2			(0x04)
+#define MCFGPT_GPTTOV1			(0x02)
+#define MCFGPT_GPTTOV0			(0x01)
+
+#define MCFGPT_GPTCTL_OMOL3(x)		(((x)&0x03)<<6)
+#define MCFGPT_GPTCTL_OMOL2(x)		(((x)&0x03)<<4)
+#define MCFGPT_GPTCTL_OMOL1(x)		(((x)&0x03)<<2)
+#define MCFGPT_GPTCTL_OMOL0(x)		(((x)&0x03))
+
+#define MCFGPT_GPTCTL2_EDG3(x)		(((x)&0x03)<<6)
+#define MCFGPT_GPTCTL2_EDG2(x)		(((x)&0x03)<<4)
+#define MCFGPT_GPTCTL2_EDG1(x)		(((x)&0x03)<<2)
+#define MCFGPT_GPTCTL2_EDG0(x)		(((x)&0x03))
+
+#define MCFGPT_GPTIE_C3I		(0x08)
+#define MCFGPT_GPTIE_C2I		(0x04)
+#define MCFGPT_GPTIE_C1I		(0x02)
+#define MCFGPT_GPTIE_C0I		(0x01)
+
+#define MCFGPT_GPTSCR2_TOI 		(0x80)
+#define MCFGPT_GPTSCR2_PUPT		(0x20)
+#define MCFGPT_GPTSCR2_RDPT		(0x10)
+#define MCFGPT_GPTSCR2_TCRE		(0x08)
+#define MCFGPT_GPTSCR2_PR(x)		(((x)&0x07))
+
+#define MCFGPT_GPTFLG1_C3F		(0x08)
+#define MCFGPT_GPTFLG1_C2F		(0x04)
+#define MCFGPT_GPTFLG1_C1F		(0x02)
+#define MCFGPT_GPTFLG1_C0F		(0x01)
+
+#define MCFGPT_GPTFLG2_TOF		(0x80)
+#define MCFGPT_GPTFLG2_C3F		(0x08)
+#define MCFGPT_GPTFLG2_C2F		(0x04)
+#define MCFGPT_GPTFLG2_C1F		(0x02)
+#define MCFGPT_GPTFLG2_C0F		(0x01)
+
+#define MCFGPT_GPTPACTL_PAE		(0x40)
+#define MCFGPT_GPTPACTL_PAMOD		(0x20)
+#define MCFGPT_GPTPACTL_PEDGE		(0x10)
+#define MCFGPT_GPTPACTL_CLK_PACLK	(0x04)
+#define MCFGPT_GPTPACTL_CLK_PACLK256	(0x08)
+#define MCFGPT_GPTPACTL_CLK_PACLK65536	(0x0C)
+#define MCFGPT_GPTPACTL_CLK(x)		(((x)&0x03)<<2)
+#define MCFGPT_GPTPACTL_PAOVI		(0x02)
+#define MCFGPT_GPTPACTL_PAI		(0x01)
+
+#define MCFGPT_GPTPAFLG_PAOVF		(0x02)
+#define MCFGPT_GPTPAFLG_PAIF		(0x01)
+
+#define MCFGPT_GPTPORT_PORTT3		(0x08)
+#define MCFGPT_GPTPORT_PORTT2		(0x04)
+#define MCFGPT_GPTPORT_PORTT1		(0x02)
+#define MCFGPT_GPTPORT_PORTT0		(0x01)
+
+#define MCFGPT_GPTDDR_DDRT3		(0x08)
+#define MCFGPT_GPTDDR_DDRT2		(0x04)
+#define MCFGPT_GPTDDR_DDRT1		(0x02)
+#define MCFGPT_GPTDDR_DDRT0		(0x01)
+
+/* Coldfire Flash Module CFM */
+
+#define MCFCFM_MCR			(*(vu_short *)(CFG_MBAR+0x1D0000))
+#define MCFCFM_MCR_LOCK			(0x0400)
+#define MCFCFM_MCR_PVIE			(0x0200)
+#define MCFCFM_MCR_AEIE			(0x0100)
+#define MCFCFM_MCR_CBEIE		(0x0080)
+#define MCFCFM_MCR_CCIE			(0x0040)
+#define MCFCFM_MCR_KEYACC		(0x0020)
+
+#define MCFCFM_CLKD			(*(vu_char *)(CFG_MBAR+0x1D0002))
+
+#define MCFCFM_SEC			(*(vu_long*) (CFG_MBAR+0x1D0008))
+#define MCFCFM_SEC_KEYEN		(0x80000000)
+#define MCFCFM_SEC_SECSTAT		(0x40000000)
+
+#define MCFCFM_PROT			(*(vu_long*) (CFG_MBAR+0x1D0010))
+#define MCFCFM_SACC			(*(vu_long*) (CFG_MBAR+0x1D0014))
+#define MCFCFM_DACC			(*(vu_long*) (CFG_MBAR+0x1D0018))
+#define MCFCFM_USTAT			(*(vu_char*) (CFG_MBAR+0x1D0020))
+#define MCFCFM_USTAT_CBEIF		0x80
+#define MCFCFM_USTAT_CCIF		0x40
+#define MCFCFM_USTAT_PVIOL		0x20
+#define MCFCFM_USTAT_ACCERR		0x10
+#define MCFCFM_USTAT_BLANK		0x04
 
+#define MCFCFM_CMD			(*(vu_char*) (CFG_MBAR+0x1D0024))
+#define MCFCFM_CMD_ERSVER		0x05
+#define MCFCFM_CMD_PGERSVER		0x06
+#define MCFCFM_CMD_PGM			0x20
+#define MCFCFM_CMD_PGERS		0x40
+#define MCFCFM_CMD_MASERS		0x41
 
 /****************************************************************************/
 #endif	/* m5282_h */
diff --git a/include/asm-mips/au1x00.h b/include/asm-mips/au1x00.h
index 4e19dc4da2..a4e9947d93 100644
--- a/include/asm-mips/au1x00.h
+++ b/include/asm-mips/au1x00.h
@@ -119,6 +119,11 @@ static __inline__ int au_ffs(int x)
 	return __ilog2(x & -x) + 1;
 }
 
+#define gpio_set(Value)      outl(Value, SYS_OUTPUTSET)
+#define gpio_clear(Value)    outl(Value, SYS_OUTPUTCLR)
+#define gpio_read()          inl(SYS_PINSTATERD)
+#define gpio_tristate(Value) outl(Value, SYS_TRIOUTCLR)
+
 #endif /* !ASSEMBLY */
 
 #ifdef CONFIG_PM
diff --git a/include/asm-nios2/io.h b/include/asm-nios2/io.h
index b16a98865a..0fab53bf0e 100644
--- a/include/asm-nios2/io.h
+++ b/include/asm-nios2/io.h
@@ -39,12 +39,13 @@ extern unsigned inl (unsigned port);
 #define readl(addr)\
 	({unsigned long val;\
 	 asm volatile( "ldwio %0, 0(%1)" :"=r"(val) : "r" (addr)); val;})
+
 #define writeb(addr,val)\
-	asm volatile ("stbio %0, 0(%1)" : : "r" (addr), "r" (val))
+	asm volatile ("stbio %1, 0(%0)" : : "r" (addr), "r" (val))
 #define writew(addr,val)\
-	asm volatile ("sthio %0, 0(%1)" : : "r" (addr), "r" (val))
+	asm volatile ("sthio %1, 0(%0)" : : "r" (addr), "r" (val))
 #define writel(addr,val)\
-	asm volatile ("stwio %0, 0(%1)" : : "r" (addr), "r" (val))
+	asm volatile ("stwio %1, 0(%0)" : : "r" (addr), "r" (val))
 
 #define inb(addr)	readb(addr)
 #define inw(addr)	readw(addr)
diff --git a/include/asm-ppc/mmu.h b/include/asm-ppc/mmu.h
index 612b5df487..11de3b0879 100644
--- a/include/asm-ppc/mmu.h
+++ b/include/asm-ppc/mmu.h
@@ -483,4 +483,45 @@ extern int write_bat(ppc_bat_t bat, unsigned long upper, unsigned long lower);
 #define LAWAR_SIZE_16G         (LAWAR_SIZE_BASE+23)
 #define LAWAR_SIZE_32G         (LAWAR_SIZE_BASE+24)
 
+#ifdef CONFIG_440SPE
+/*----------------------------------------------------------------------------+
+| Following instructions are not available in Book E mode of the GNU assembler.
++----------------------------------------------------------------------------*/
+#define DCCCI(ra,rb)			.long 0x7c000000|\
+					(ra<<16)|(rb<<11)|(454<<1)
+
+#define ICCCI(ra,rb)			.long 0x7c000000|\
+					(ra<<16)|(rb<<11)|(966<<1)
+
+#define DCREAD(rt,ra,rb)		.long 0x7c000000|\
+					(rt<<21)|(ra<<16)|(rb<<11)|(486<<1)
+
+#define ICREAD(ra,rb)			.long 0x7c000000|\
+					(ra<<16)|(rb<<11)|(998<<1)
+
+#define TLBSX(rt,ra,rb)			.long 0x7c000000|\
+					(rt<<21)|(ra<<16)|(rb<<11)|(914<<1)
+
+#define TLBWE(rs,ra,ws)			.long 0x7c000000|\
+					(rs<<21)|(ra<<16)|(ws<<11)|(978<<1)
+
+#define TLBRE(rt,ra,ws)			.long 0x7c000000|\
+					(rt<<21)|(ra<<16)|(ws<<11)|(946<<1)
+
+#define TLBSXDOT(rt,ra,rb)		.long 0x7c000001|\
+					(rt<<21)|(ra<<16)|(rb<<11)|(914<<1)
+
+#define MSYNC				.long 0x7c000000|\
+					(598<<1)
+
+#define MBAR_INST 				.long 0x7c000000|\
+					(854<<1)
+
+/*----------------------------------------------------------------------------+
+| Following instruction is not available in PPC405 mode of the GNU assembler.
++----------------------------------------------------------------------------*/
+#define TLBRE(rt,ra,ws)			.long 0x7c000000|\
+					(rt<<21)|(ra<<16)|(ws<<11)|(946<<1)
+
+#endif
 #endif /* _PPC_MMU_H_ */
diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h
index 3ba0bdf657..14b92825cd 100644
--- a/include/asm-ppc/processor.h
+++ b/include/asm-ppc/processor.h
@@ -745,6 +745,8 @@
 #define PVR_405EP_RB	0x51210950
 #define PVR_440SP_RA	0x53221850
 #define PVR_440SP_RB	0x53221891
+#define PVR_440SPe_RA	0x53421890
+#define PVR_440SPe_RB	0x53421891
 #define PVR_601		0x00010000
 #define PVR_602		0x00050000
 #define PVR_603		0x00030000
diff --git a/include/bmp_logo.h b/include/bmp_logo.h
deleted file mode 100644
index 9c924b8592..0000000000
--- a/include/bmp_logo.h
+++ /dev/null
@@ -1,1948 +0,0 @@
-/*
- * Automatically generated by "tools/bmp_logo"
- *
- * DO NOT EDIT
- *
- */
-
-
-#ifndef __BMP_LOGO_H__
-#define __BMP_LOGO_H__
-
-#define BMP_LOGO_WIDTH		160
-#define BMP_LOGO_HEIGHT		96
-#define BMP_LOGO_COLORS		31
-#define BMP_LOGO_OFFSET		16
-
-unsigned short bmp_logo_palette[] = {
-	0x0343,  0x0454,  0x0565,  0x0565,  0x0676,  0x0787,  0x0898,  0x0999,
-	0x0AAA,  0x0ABA,  0x0BCB,  0x0CCC,  0x0DDD,  0x0EEE,  0x0FFF,  0x0FB3,
-	0x0FB4,  0x0FC4,  0x0FC5,  0x0FC6,  0x0FD7,  0x0FD8,  0x0FD9,  0x0FDA,
-	0x0FEA,  0x0FEB,  0x0FEC,  0x0FFD,  0x0FFE,  0x0FFF,  0x0FFF,
-};
-
-unsigned char bmp_logo_bitmap[] = {
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x1B,
-	0x1B, 0x1B, 0x1B, 0x1B, 0x1B, 0x1B, 0x1B, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x1B, 0x11, 0x10, 0x10, 0x10, 0x10,
-	0x14, 0x1E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x1B, 0x14, 0x10, 0x10, 0x10, 0x10, 0x10, 0x17,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x1B, 0x14, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x14, 0x1C, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2A, 0x1F,
-	0x1F, 0x22, 0x2A, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x29, 0x1F, 0x1F, 0x1F,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x14,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x18, 0x2E, 0x2E, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x18, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x12, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x19,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x18, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2A, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x2D, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x28, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x1C, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x19, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x12, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2A, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x1B, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x18,
-	0x2E, 0x2E, 0x2E, 0x16, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2A, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x18, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x16, 0x2E, 0x17, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2A, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x19, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2A, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x2B, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2D, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x16, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2A, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x28, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x20, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2A, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x22, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x22, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x14, 0x17, 0x15, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x17, 0x1B, 0x2E, 0x1A, 0x14, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x17, 0x1B, 0x2E, 0x1B,
-	0x14, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x1B, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2D, 0x29,
-	0x23, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x23, 0x2A,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x14, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x14, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x1B, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x15, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x17, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x12, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x19, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2B, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x24, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x12, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x14, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x1B, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x1E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x1A, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x1C, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x16, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10,
-	0x10, 0x10, 0x11, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x11, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x1E, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x1E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x2E, 0x2E, 0x2E, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x1A, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x2E, 0x2E, 0x2E, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x10, 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2B, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x28, 0x2E, 0x2A, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x29, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x1E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x10, 0x19, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x1E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x2E, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x11, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x21, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x2E, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x12, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x17,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x2E, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x1D, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x17,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x14, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x1B, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x2A, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x14, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x17,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x1B, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x1B, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x23, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x17, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x17,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x17, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x20, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x22, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x18, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x17,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x17, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x23, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x17, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x17,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x17, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x23, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x17,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x17, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x2A, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x17,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x17, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x2E, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x1E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x17, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x21, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x2E, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x2D, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x1E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x12, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x17, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x2E, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x1D, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x18, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x1D, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x17, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x22, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x2E, 0x2E, 0x2E, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x20, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x16, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x17, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2D, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x2E, 0x2E, 0x2E, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x1D, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x1C, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x17, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x2E, 0x2E, 0x2E, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x1C, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x1E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x16, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x17, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x11, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x1E, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x17, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x16, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x17, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x2D, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x21, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x24, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x1D, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x14, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x11, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x18,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x17, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x15, 0x2E, 0x2E, 0x2E, 0x19,
-	0x12, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x11, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x1E, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x1B, 0x2E, 0x2E, 0x1B, 0x16, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x19, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x17, 0x2E, 0x2E, 0x2E, 0x2E, 0x2D, 0x26,
-	0x22, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x22, 0x27,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x13, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x16, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x19, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x17, 0x2E, 0x2E, 0x2E, 0x2E, 0x2A, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x2D, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2D, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x12, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x1C, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x17, 0x2E, 0x2E, 0x2E, 0x2E, 0x2A, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x2A, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x20, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x13, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x17, 0x2E, 0x2E, 0x2E, 0x2E, 0x2A, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x2C, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2D, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x11, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x1C, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x1C,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x17, 0x2E, 0x2E, 0x2E, 0x2E, 0x2A, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x11, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x12, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x1E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x17, 0x2E, 0x2E, 0x2E, 0x2E, 0x2A, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x1F, 0x2A, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2B, 0x1F, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x13, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x1B,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x1D, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x12, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x17, 0x2E, 0x2E, 0x2E, 0x2E, 0x2A, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x20,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x1A, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x11, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x15, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x17, 0x2E, 0x2E, 0x2E, 0x2E, 0x2A, 0x1F,
-	0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x2D, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x29, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x17, 0x14, 0x10, 0x11, 0x14,
-	0x1A, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x1B, 0x17, 0x17, 0x1A, 0x1B, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2B, 0x26,
-	0x2A, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2A, 0x26,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10,
-	0x10, 0x17, 0x1B, 0x1B, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x16, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x17, 0x10,
-	0x1E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x12, 0x10, 0x10, 0x14, 0x14, 0x10,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x16,
-	0x10, 0x10, 0x14, 0x14, 0x10, 0x10, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x17, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x12, 0x10, 0x1B, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x17, 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10,
-	0x10, 0x13, 0x14, 0x13, 0x10, 0x10, 0x1C, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x1B, 0x10, 0x2E,
-	0x10, 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x18, 0x10, 0x10, 0x17, 0x14, 0x10, 0x10, 0x2E,
-	0x2E, 0x2E, 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x16, 0x10,
-	0x16, 0x2E, 0x2E, 0x2E, 0x2E, 0x16, 0x10, 0x11,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x10, 0x19, 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x1B, 0x10, 0x10,
-	0x1D, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x12,
-	0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10,
-	0x2E, 0x2E, 0x10, 0x10, 0x19, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x15,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x1B, 0x10, 0x2E, 0x2E, 0x2E, 0x10,
-	0x10, 0x2E, 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x10,
-	0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x1B, 0x10, 0x10,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x15, 0x10, 0x10, 0x10,
-	0x1D, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x1B,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x14, 0x10,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E, 0x2E, 0x10,
-	0x19, 0x2E, 0x2E, 0x10, 0x10, 0x2E, 0x2E, 0x10,
-	0x1B, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x1E,
-	0x10, 0x10, 0x10, 0x17, 0x17, 0x10, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x1B, 0x10, 0x1B,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10,
-	0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10,
-	0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x16, 0x10, 0x1E, 0x12, 0x10,
-	0x2E, 0x2E, 0x2E, 0x18, 0x10, 0x2E, 0x17, 0x10,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x16, 0x10,
-	0x1C, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x1B, 0x10, 0x1B,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10,
-	0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10,
-	0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x15, 0x10,
-	0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x17,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x14, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x1B, 0x10, 0x1B,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x14,
-	0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x1E,
-	0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10, 0x11, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x17, 0x10, 0x10, 0x10, 0x10, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x13, 0x10, 0x10, 0x10, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x17, 0x10, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x17,
-	0x10, 0x10, 0x10, 0x18, 0x2E, 0x10, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x1B, 0x10, 0x1B,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x17, 0x10, 0x10, 0x10, 0x10, 0x10, 0x19,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x17, 0x17, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x17, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x13, 0x10, 0x1A, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x1E, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x19, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x10, 0x10, 0x2E, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x19, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10,
-	0x2E, 0x10, 0x10, 0x10, 0x10, 0x10, 0x1C, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x16, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x15, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10,
-	0x2E, 0x10, 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x17, 0x10, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x17, 0x10, 0x2E, 0x17,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x2E, 0x2E, 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x1E, 0x10, 0x12, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x10, 0x10, 0x10, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x12,
-	0x11, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10,
-	0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x1C, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x1A, 0x10,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10,
-	0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x17, 0x10, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x17, 0x10, 0x10, 0x1C,
-	0x2E, 0x2E, 0x2E, 0x1B, 0x10, 0x16, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x16, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x17, 0x10, 0x1A, 0x2E,
-	0x2E, 0x1D, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x14, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x1E, 0x10, 0x19, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x1A, 0x10, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x13,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10,
-	0x17, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x17, 0x10, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x17, 0x10, 0x13, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E,
-	0x2E, 0x17, 0x10, 0x1C, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x14, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x10, 0x11, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x14,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x17, 0x10, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x17, 0x10, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x17, 0x10, 0x18,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E, 0x2E,
-	0x2E, 0x1D, 0x10, 0x15, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x14, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x19, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x17, 0x10, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x17, 0x10, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x17, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x14, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x10, 0x10, 0x19, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x14, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10,
-	0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x1A, 0x10,
-	0x14, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x17, 0x10, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x17, 0x10, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x1B, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x1C, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x14, 0x10, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x1A, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x1C, 0x10, 0x10, 0x10, 0x10, 0x10, 0x13, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x13, 0x10, 0x10, 0x10, 0x10, 0x10, 0x16, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x17, 0x10, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x17, 0x10, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x13, 0x10,
-	0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x11, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x1E, 0x10, 0x16, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x10, 0x10, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x1A, 0x10, 0x19, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x11, 0x10, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x10, 0x10, 0x10, 0x11, 0x14,
-	0x10, 0x10, 0x10, 0x17, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x2E,
-	0x2E, 0x2E, 0x2E, 0x2E, 0x2E, 0x16, 0x10, 0x10,
-	0x10, 0x14, 0x13, 0x10, 0x10, 0x10, 0x2E, 0x2E,
-
-};
-
-#endif /* __BMP_LOGO_H__ */
diff --git a/include/common.h b/include/common.h
index 7e54da93bf..9da66b8c27 100644
--- a/include/common.h
+++ b/include/common.h
@@ -120,12 +120,13 @@ typedef void (interrupt_handler_t)(void *);
 
 /*
  * enable common handling for all TQM8xxL/M boards:
- * - CONFIG_TQM8xxM will be defined for all TQM8xxM boards
+ * - CONFIG_TQM8xxM will be defined for all TQM8xxM and TQM885D boards
  * - CONFIG_TQM8xxL will be defined for all TQM8xxL _and_ TQM8xxM boards
  */
 #if defined(CONFIG_TQM823M) || defined(CONFIG_TQM850M) || \
     defined(CONFIG_TQM855M) || defined(CONFIG_TQM860M) || \
-    defined(CONFIG_TQM862M) || defined(CONFIG_TQM866M)
+    defined(CONFIG_TQM862M) || defined(CONFIG_TQM866M) || \
+    defined(CONFIG_TQM885D)
 # ifndef CONFIG_TQM8xxM
 #  define CONFIG_TQM8xxM
 # endif
@@ -470,6 +471,10 @@ void   get_sys_info  ( sys_info_t * );
 #if defined(CONFIG_4xx) || defined(CONFIG_IOP480)
 #  if defined(CONFIG_440)
     typedef PPC440_SYS_INFO sys_info_t;
+#	if defined(CONFIG_440SPE)
+	 unsigned long determine_sysper(void);
+	 unsigned long determine_pci_clock_per(void);
+#	endif
 #  else
     typedef PPC405_SYS_INFO sys_info_t;
 #  endif
diff --git a/include/commproc.h b/include/commproc.h
index 061468e752..12400e3edd 100644
--- a/include/commproc.h
+++ b/include/commproc.h
@@ -1405,15 +1405,16 @@ typedef struct scc_enet {
 
 #endif	/* CONFIG_SXNI855T */
 
-/***  MVS1, TQM823L/M, TQM850L/M, ETX094, R360MPI  *******************/
+/***  MVS1, TQM823L/M, TQM850L/M, TQM885D, ETX094, R360MPI  **********/
 
 #if (defined(CONFIG_MVS) && CONFIG_MVS < 2) || \
     defined(CONFIG_R360MPI) || defined(CONFIG_RBC823)  || \
     defined(CONFIG_TQM823L) || defined(CONFIG_TQM823M) || \
     defined(CONFIG_TQM850L) || defined(CONFIG_TQM850M) || \
-    defined(CONFIG_ETX094)  || defined(CONFIG_RRVISION)|| \
-    defined(CONFIG_VIRTLAB2)||				  \
+    defined(CONFIG_TQM885D) || defined(CONFIG_ETX094)  || \
+    defined(CONFIG_RRVISION)|| defined(CONFIG_VIRTLAB2)|| \
    (defined(CONFIG_LANTEC) && CONFIG_LANTEC < 2)
+
 /* Bits in parallel I/O port registers that have to be set/cleared
  * to configure the pins for SCC2 use.
  */
@@ -1438,6 +1439,11 @@ typedef struct scc_enet {
  */
 #define SICR_ENET_MASK	((uint)0x0000ff00)
 #define SICR_ENET_CLKRT	((uint)0x00002600)
+
+# ifdef CONFIG_FEC_ENET		/* Use FEC for Fast Ethernet */
+#define FEC_ENET
+# endif	/* CONFIG_FEC_ENET */
+
 #endif	/* CONFIG_MVS v1, CONFIG_TQM823L/M, CONFIG_TQM850L/M, etc. */
 
 /***  TQM855L/M, TQM860L/M, TQM862L/M, TQM866L/M  *********************/
diff --git a/include/configs/CPU87.h b/include/configs/CPU87.h
index 9a98e5c191..7a1dada2db 100644
--- a/include/configs/CPU87.h
+++ b/include/configs/CPU87.h
@@ -455,7 +455,7 @@
 #define CFG_MIN_AM_MASK 0xC0000000
 
 /*
- * we use the same values for 32 MB and 128 MB SDRAM
+ * we use the same values for 32 MB, 128 MB and 256 MB SDRAM
  * refresh rate = 7.68 uS (100 MHz Bus Clock)
  */
 
@@ -510,6 +510,24 @@
 			 PSDMR_WRC_1C			|\
 			 PSDMR_CL_2)
 
+	/* SDRAM initialization values for 10-column chips
+	 */
+#define CFG_OR2_10COL	(CFG_MIN_AM_MASK		|\
+			 ORxS_BPD_4			|\
+			 ORxS_ROWST_PBI1_A4		|\
+			 ORxS_NUMR_13)
+
+#define CFG_PSDMR_10COL	(PSDMR_PBI			|\
+			 PSDMR_SDAM_A17_IS_A5		|\
+			 PSDMR_BSMA_A13_A15		|\
+			 PSDMR_SDA10_PBI1_A6		|\
+			 PSDMR_RFRC_7_CLK		|\
+			 PSDMR_PRETOACT_2W		|\
+			 PSDMR_ACTTORW_2W		|\
+			 PSDMR_LDOTOPRE_1C		|\
+			 PSDMR_WRC_1C			|\
+			 PSDMR_CL_2)
+			 
 /*
  * Init Memory Controller:
  *
@@ -588,9 +606,9 @@
 			 BRx_MS_SDRAM_P			|\
 			 BRx_V)
 
-#define CFG_OR2_PRELIM	 CFG_OR2_9COL
+#define CFG_OR2_PRELIM	 CFG_OR2_8COL
 
-#define CFG_PSDMR	 CFG_PSDMR_9COL
+#define CFG_PSDMR	 CFG_PSDMR_8COL
 #endif /* CFG_RAMBOOT */
 
 /* Bank 3 - Dual Ported SRAM
diff --git a/include/configs/EB+MCF-EV123.h b/include/configs/EB+MCF-EV123.h
new file mode 100644
index 0000000000..720b335b09
--- /dev/null
+++ b/include/configs/EB+MCF-EV123.h
@@ -0,0 +1,223 @@
+/*
+ * Configuation settings for the BuS EB+MCF-EV123 boards.
+ *
+ * (C) Copyright 2005 BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _CONFIG_EB_MCF_EV123_H_
+#define _CONFIG_EB_MCF_EV123_H_
+
+#define  CONFIG_EB_MCF_EV123
+
+#undef DEBUG
+#undef CFG_HALT_BEFOR_RAM_JUMP
+#undef ET_DEBUG
+
+/*
+ * High Level Configuration Options (easy to change)
+ */
+
+#define	CONFIG_MCF52x2			/* define processor family */
+#define CONFIG_M5282			/* define processor type */
+
+#define CONFIG_MISC_INIT_R
+
+#define FEC_ENET
+#define CONFIG_ETHADDR 00:CF:52:82:EB:01
+
+#define CONFIG_BAUDRATE 9600
+#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
+
+#undef	CONFIG_MONITOR_IS_IN_RAM	/* define if monitor is started from a pre-loader */
+
+#define CONFIG_BOOTCOMMAND "printenv"
+
+/* Configuration for environment
+ * Environment is embedded in u-boot in the second sector of the flash
+ */
+#ifndef CONFIG_MONITOR_IS_IN_RAM
+#define CFG_ENV_ADDR		0xF003C000	/* End of 256K */
+#define CFG_ENV_SECT_SIZE	0x4000
+#define CFG_ENV_IS_IN_FLASH	1
+/*
+#define CFG_ENV_IS_EMBEDDED	1
+#define CFG_ENV_ADDR_REDUND		0xF0018000
+#define CFG_ENV_SECT_SIZE_REDUND	0x4000
+*/
+#else
+#define CFG_ENV_ADDR		0xFFE04000
+#define CFG_ENV_SECT_SIZE	0x2000
+#define CFG_ENV_IS_IN_FLASH	1
+#endif
+
+/*#define CONFIG_COMMANDS  ( CONFIG_CMD_DFL & ~(CFG_CMD_LOADS | CFG_CMD_LOADB) ) */
+#define CONFIG_COMMANDS  ( CONFIG_CMD_DFL & ~(CFG_CMD_LOADB))
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#define CONFIG_BOOTDELAY	5
+#define CFG_PROMPT		"\nEV123 U-Boot> "
+#define	CFG_LONGHELP				/* undef to save memory		*/
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define	CFG_CBSIZE		1024		/* Console I/O Buffer Size	*/
+#else
+#define	CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
+#endif
+#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define	CFG_MAXARGS		16		/* max number of command args	*/
+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+
+#define CFG_LOAD_ADDR		0x20000
+
+#define CFG_MEMTEST_START	0x100000
+#define CFG_MEMTEST_END		0x400000
+/*#define CFG_DRAM_TEST		1 */
+#undef CFG_DRAM_TEST
+
+/* Clock and PLL Configuration */
+#define CFG_HZ			10000000
+#define	CFG_CLK			58982400       /* 9,8304MHz * 6 */
+
+/* PLL Configuration: Ext Clock * 6 (see table 9-4 of MCF user manual) */
+
+#define CFG_MFD			0x01	/* PLL Multiplication Factor Devider */
+#define CFG_RFD			0x00	/* PLL Reduce Frecuency Devider */
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+#define	CFG_MBAR		0x40000000
+
+#define	CFG_DISCOVER_PHY
+/* #define	CFG_ENET_BD_BASE	0x380000 */
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CFG_INIT_RAM_ADDR       0x20000000
+#define CFG_INIT_RAM_END	0x10000		/* End of used area in internal SRAM	*/
+#define CFG_GBL_DATA_SIZE	64      	/* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE1		0x00000000
+#define	CFG_SDRAM_SIZE1		16		/* SDRAM size in MB */
+
+/*
+#define CFG_SDRAM_BASE0		CFG_SDRAM_BASE1+CFG_SDRAM_SIZE1*1024*1024
+#define	CFG_SDRAM_SIZE0		16	*/	/* SDRAM size in MB */
+
+#define CFG_SDRAM_BASE		CFG_SDRAM_BASE1
+#define	CFG_SDRAM_SIZE		CFG_SDRAM_SIZE1
+
+#define CFG_FLASH_BASE		0xFFE00000
+#define	CFG_INT_FLASH_BASE	0xF0000000
+
+/* If M5282 port is fully implemented the monitor base will be behind
+ * the vector table. */
+#if (TEXT_BASE !=  CFG_INT_FLASH_BASE)
+#define CFG_MONITOR_BASE	(TEXT_BASE + 0x400)
+#else
+#define CFG_MONITOR_BASE	(TEXT_BASE + 0x418) /* 24 Byte for CFM-Config */
+#endif
+
+#define CFG_MONITOR_LEN		0x20000
+#define CFG_MALLOC_LEN		(256 << 10)
+#define CFG_BOOTPARAMS_LEN	64*1024
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization ??
+ */
+#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define	CFG_MAX_FLASH_SECT	35
+#define	CFG_MAX_FLASH_BANKS	2
+#define	CFG_FLASH_ERASE_TOUT	10000000
+#define	CFG_FLASH_PROTECTION
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE	16
+
+/*-----------------------------------------------------------------------
+ * Memory bank definitions
+ */
+
+#define CFG_CS0_BASE		CFG_FLASH_BASE
+#define CFG_CS0_SIZE		2*1024*1024
+#define CFG_CS0_WIDTH		16
+#define CFG_CS0_RO 		0
+#define CFG_CS0_WS		6
+
+#define CFG_CS3_BASE		0xE0000000
+#define CFG_CS3_SIZE		1*1024*1024
+#define CFG_CS3_WIDTH		16
+#define CFG_CS3_RO 		0
+#define CFG_CS3_WS		6
+
+/*-----------------------------------------------------------------------
+ * Port configuration
+ */
+#define CFG_PACNT		0x0000000	/* Port A D[31:24] */
+#define CFG_PADDR		0x0000000
+#define CFG_PADAT		0x0000000
+
+#define CFG_PBCNT		0x0000000	/* Port B D[23:16] */
+#define CFG_PBDDR		0x0000000
+#define CFG_PBDAT		0x0000000
+
+#define CFG_PCCNT		0x0000000	/* Port C D[15:08] */
+#define CFG_PCDDR		0x0000000
+#define CFG_PCDAT		0x0000000
+
+#define CFG_PDCNT		0x0000000	/* Port D D[07:00] */
+#define CFG_PCDDR		0x0000000
+#define CFG_PCDAT		0x0000000
+
+#define CFG_PEHLPAR		0xC0
+#define CFG_PUAPAR		0x0F		/* UA0..UA3 = Uart 0 +1 */
+#define CFG_DDRUA		0x05
+#define CFG_PJPAR 		0xFF;
+
+/*-----------------------------------------------------------------------
+ * CCM configuration
+ */
+
+#define	CFG_CCM_SIZ		0
+
+/*---------------------------------------------------------------------*/
+#endif	/* _CONFIG_M5282EVB_H */
+/*---------------------------------------------------------------------*/
diff --git a/include/configs/EP1C20.h b/include/configs/EP1C20.h
new file mode 100644
index 0000000000..5507f352b9
--- /dev/null
+++ b/include/configs/EP1C20.h
@@ -0,0 +1,199 @@
+/*
+ * (C) Copyright 2005, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*------------------------------------------------------------------------
+ * BOARD/CPU
+ *----------------------------------------------------------------------*/
+#define CONFIG_EP1C20		1		/* EP1C20 board		*/
+#define CONFIG_SYS_CLK_FREQ	50000000	/* 50 MHz core clk	*/
+
+#define CFG_RESET_ADDR		0x00000000	/* Hard-reset address	*/
+#define CFG_EXCEPTION_ADDR	0x01000020	/* Exception entry point*/
+#define CFG_NIOS_SYSID_BASE	0x021208b8	/* System id address	*/
+#define CONFIG_BOARD_EARLY_INIT_F 1	/* enable early board-spec. init*/
+
+/*------------------------------------------------------------------------
+ * CACHE -- the following will support II/s and II/f. The II/s does not
+ * have dcache, so the cache instructions will behave as NOPs.
+ *----------------------------------------------------------------------*/
+#define CFG_ICACHE_SIZE		4096		/* 4 KByte total	*/
+#define CFG_ICACHELINE_SIZE	32		/* 32 bytes/line	*/
+#define CFG_DCACHE_SIZE		2048		/* 2 KByte (II/f)	*/
+#define CFG_DCACHELINE_SIZE	4		/* 4 bytes/line (II/f)	*/
+
+/*------------------------------------------------------------------------
+ * MEMORY BASE ADDRESSES
+ *----------------------------------------------------------------------*/
+#define CFG_FLASH_BASE		0x00000000	/* FLASH base addr	*/
+#define CFG_FLASH_SIZE		0x00800000	/* 8 MByte		*/
+#define CFG_SDRAM_BASE		0x01000000	/* SDRAM base addr	*/
+#define CFG_SDRAM_SIZE		0x01000000	/* 16 MByte		*/
+#define CFG_SRAM_BASE		0x02000000	/* SRAM base addr	*/
+#define CFG_SRAM_SIZE		0x00100000	/* 1 MB (only 1M mapped)*/
+
+/*------------------------------------------------------------------------
+ * MEMORY ORGANIZATION
+ *	-Monitor at top.
+ *	-The heap is placed below the monitor.
+ *	-Global data is placed below the heap.
+ *	-The stack is placed below global data (&grows down).
+ *----------------------------------------------------------------------*/
+#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 128k		*/
+#define CFG_GBL_DATA_SIZE	128		/* Global data size rsvd*/
+#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128*1024)
+
+#define CFG_MONITOR_BASE	TEXT_BASE
+#define CFG_MALLOC_BASE		(CFG_MONITOR_BASE - CFG_MALLOC_LEN)
+#define CFG_GBL_DATA_OFFSET	(CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP		CFG_GBL_DATA_OFFSET
+
+/*------------------------------------------------------------------------
+ * FLASH (AM29LV065D)
+ *----------------------------------------------------------------------*/
+#define CFG_MAX_FLASH_SECT	128		/* Max # sects per bank */
+#define CFG_MAX_FLASH_BANKS	1		/* Max # of flash banks */
+#define CFG_FLASH_ERASE_TOUT	8000		/* Erase timeout (msec) */
+#define CFG_FLASH_WRITE_TOUT	100		/* Write timeout (msec) */
+#define CFG_FLASH_WORD_SIZE	unsigned char	/* flash word size	*/
+
+/*------------------------------------------------------------------------
+ * ENVIRONMENT -- Put environment in sector CFG_MONITOR_LEN above
+ * CFG_RESET_ADDR, since we assume the monitor is stored at the
+ * reset address, no? This will keep the environment in user region
+ * of flash. NOTE: the monitor length must be multiple of sector size
+ * (which is common practice).
+ *----------------------------------------------------------------------*/
+#define CFG_ENV_IS_IN_FLASH	1		/* Environment in flash */
+#define CFG_ENV_SIZE		(64 * 1024)	/* 64 KByte (1 sector)	*/
+#define CONFIG_ENV_OVERWRITE			/* Serial change Ok	*/
+#define CFG_ENV_ADDR	(CFG_RESET_ADDR + CFG_MONITOR_LEN)
+
+/*------------------------------------------------------------------------
+ * CONSOLE
+ *----------------------------------------------------------------------*/
+#if defined(CONFIG_CONSOLE_JTAG)
+#define CFG_NIOS_CONSOLE	0x021208b0	/* JTAG UART base addr	*/
+#else
+#define CFG_NIOS_CONSOLE	0x02120840	/* UART base addr	*/
+#endif
+
+#define CFG_NIOS_FIXEDBAUD	1		/* Baudrate is fixed	*/
+#define CONFIG_BAUDRATE		115200		/* Initial baudrate	*/
+#define CFG_BAUDRATE_TABLE	{115200}	/* It's fixed ;-)	*/
+
+#define CFG_CONSOLE_INFO_QUIET	1		/* Suppress console info*/
+
+/*------------------------------------------------------------------------
+ * EPCS Device -- wne CFG_NIOS_EPCSBASE is defined code/commands for
+ * epcs device access is enabled. The base address is the epcs
+ * _register_ base address, NOT THE ADDRESS OF THE MEMORY BLOCK.
+ * The register base is currently at offset 0x600 from the memory base.
+ *----------------------------------------------------------------------*/
+#define CFG_NIOS_EPCSBASE	0x02100200	/* EPCS register base	*/
+
+/*------------------------------------------------------------------------
+ * DEBUG
+ *----------------------------------------------------------------------*/
+#undef CONFIG_ROM_STUBS				/* Stubs not in ROM	*/
+
+/*------------------------------------------------------------------------
+ * TIMEBASE --
+ *
+ * The high res timer defaults to 1 msec. Since it includes the period
+ * registers, we can slow it down to 10 msec using TMRCNT. If the default
+ * period is acceptable, TMRCNT can be left undefined.
+ *----------------------------------------------------------------------*/
+#define CFG_NIOS_TMRBASE	0x02120820	/* Tick timer base addr */
+#define CFG_NIOS_TMRIRQ		3		/* Timer IRQ num	*/
+#define CFG_NIOS_TMRMS		10		/* 10 msec per tick	*/
+#define CFG_NIOS_TMRCNT (CFG_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000))
+#define CFG_HZ		(CONFIG_SYS_CLK_FREQ/(CFG_NIOS_TMRCNT + 1))
+
+/*------------------------------------------------------------------------
+ * STATUS LED -- Provides a simple blinking led. For Nios2 each board
+ * must implement its own led routines -- leds are, after all,
+ * board-specific, no?
+ *----------------------------------------------------------------------*/
+#define CFG_LEDPIO_ADDR		0x02120870	/* LED PIO base addr	*/
+#define CONFIG_STATUS_LED			/* Enable status driver */
+
+#define STATUS_LED_BIT		1		/* Bit-0 on PIO		*/
+#define STATUS_LED_STATE	1		/* Blinking		*/
+#define STATUS_LED_PERIOD	(500/CFG_NIOS_TMRMS) /* Every 500 msec	*/
+
+/*------------------------------------------------------------------------
+ * ETHERNET -- The header file for the SMC91111 driver hurts my eyes ...
+ * and really doesn't need any additional clutter. So I choose the lazy
+ * way out to avoid changes there -- define the base address to ensure
+ * cache bypass so there's no need to monkey with inx/outx macros.
+ *----------------------------------------------------------------------*/
+#define CONFIG_SMC91111_BASE	0x82110300	/* Base addr (bypass)	*/
+#define CONFIG_DRIVER_SMC91111			/* Using SMC91c111	*/
+#undef	CONFIG_SMC91111_EXT_PHY			/* Internal PHY		*/
+#define CONFIG_SMC_USE_32_BIT			/* 32-bit interface	*/
+
+#define CONFIG_ETHADDR		08:00:3e:26:0a:5b
+#define CONFIG_NETMASK		255.255.255.0
+#define CONFIG_IPADDR		192.168.2.21
+#define CONFIG_SERVERIP		192.168.2.16
+
+/*------------------------------------------------------------------------
+ * COMMANDS
+ *----------------------------------------------------------------------*/
+#define CONFIG_COMMANDS		(CFG_CMD_BDI	| \
+				 CFG_CMD_DHCP	| \
+				 CFG_CMD_ECHO	| \
+				 CFG_CMD_ENV	| \
+				 CFG_CMD_FLASH	| \
+				 CFG_CMD_IMI	| \
+				 CFG_CMD_IRQ	| \
+				 CFG_CMD_LOADS	| \
+				 CFG_CMD_LOADB	| \
+				 CFG_CMD_MEMORY | \
+				 CFG_CMD_MISC	| \
+				 CFG_CMD_NET	| \
+				 CFG_CMD_PING	| \
+				 CFG_CMD_RUN	| \
+				 CFG_CMD_SAVES	)
+#include <cmd_confdefs.h>
+
+/*------------------------------------------------------------------------
+ * MISC
+ *----------------------------------------------------------------------*/
+#define CFG_LONGHELP				/* Provide extended help*/
+#define CFG_PROMPT		"==> "		/* Command prompt	*/
+#define CFG_CBSIZE		256		/* Console I/O buf size */
+#define CFG_MAXARGS		16		/* Max command args	*/
+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot arg buf size	*/
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print buf size */
+#define CFG_LOAD_ADDR		CFG_SDRAM_BASE	/* Default load address */
+#define CFG_MEMTEST_START	CFG_SDRAM_BASE	/* Start addr for test	*/
+#define CFG_MEMTEST_END		CFG_INIT_SP - 0x00020000
+
+#define CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2	"> "
+
+#endif	/* __CONFIG_H */
diff --git a/include/configs/EP1S10.h b/include/configs/EP1S10.h
new file mode 100644
index 0000000000..6eca9f23dc
--- /dev/null
+++ b/include/configs/EP1S10.h
@@ -0,0 +1,193 @@
+/*
+ * (C) Copyright 2005, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*------------------------------------------------------------------------
+ * BOARD/CPU
+ *----------------------------------------------------------------------*/
+#define CONFIG_EP1S10		1		/* EP1S10 board		*/
+#define CONFIG_SYS_CLK_FREQ	50000000	/* 50 MHz core clk	*/
+
+#define CFG_RESET_ADDR		0x00000000	/* Hard-reset address	*/
+#define CFG_EXCEPTION_ADDR	0x01000020	/* Exception entry point*/
+#define CFG_NIOS_SYSID_BASE	0x021208b8	/* System id address	*/
+
+/*------------------------------------------------------------------------
+ * CACHE -- the following will support II/s and II/f. The II/s does not
+ * have dcache, so the cache instructions will behave as NOPs.
+ *----------------------------------------------------------------------*/
+#define CFG_ICACHE_SIZE		4096		/* 4 KByte total	*/
+#define CFG_ICACHELINE_SIZE	32		/* 32 bytes/line	*/
+#define CFG_DCACHE_SIZE		2048		/* 2 KByte (II/f)	*/
+#define CFG_DCACHELINE_SIZE	4		/* 4 bytes/line (II/f)	*/
+
+/*------------------------------------------------------------------------
+ * MEMORY BASE ADDRESSES
+ *----------------------------------------------------------------------*/
+#define CFG_FLASH_BASE		0x00000000	/* FLASH base addr	*/
+#define CFG_FLASH_SIZE		0x00800000	/* 8 MByte		*/
+#define CFG_SDRAM_BASE		0x01000000	/* SDRAM base addr	*/
+#define CFG_SDRAM_SIZE		0x01000000	/* 16 MByte		*/
+#define CFG_SRAM_BASE		0x02000000	/* SRAM base addr	*/
+#define CFG_SRAM_SIZE		0x00100000	/* 1 MB			*/
+
+/*------------------------------------------------------------------------
+ * MEMORY ORGANIZATION
+ *	-Monitor at top.
+ *	-The heap is placed below the monitor.
+ *	-Global data is placed below the heap.
+ *	-The stack is placed below global data (&grows down).
+ *----------------------------------------------------------------------*/
+#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256k		*/
+#define CFG_GBL_DATA_SIZE	128		/* Global data size rsvd*/
+#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 256*1024) /* 256k heap */
+
+#define CFG_MONITOR_BASE	TEXT_BASE
+#define CFG_MALLOC_BASE		(CFG_MONITOR_BASE - CFG_MALLOC_LEN)
+#define CFG_GBL_DATA_OFFSET	(CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP		CFG_GBL_DATA_OFFSET
+
+/*------------------------------------------------------------------------
+ * FLASH (AM29LV065D)
+ *----------------------------------------------------------------------*/
+#define CFG_MAX_FLASH_SECT	128		/* Max # sects per bank */
+#define CFG_MAX_FLASH_BANKS	1		/* Max # of flash banks */
+#define CFG_FLASH_ERASE_TOUT	8000		/* Erase timeout (msec) */
+#define CFG_FLASH_WRITE_TOUT	100		/* Write timeout (msec) */
+
+/*------------------------------------------------------------------------
+ * ENVIRONMENT -- Put environment in sector CFG_MONITOR_LEN above
+ * CFG_FLASH_BASE, since we assume that u-boot is stored at the bottom
+ * of flash memory. This will keep the environment in user region
+ * of flash. NOTE: the monitor length must be multiple of sector size
+ * (which is common practice).
+ *----------------------------------------------------------------------*/
+#define CFG_ENV_IS_IN_FLASH	1		/* Environment in flash */
+#define CFG_ENV_SIZE		(64 * 1024)	/* 64 KByte (1 sector)	*/
+#define CONFIG_ENV_OVERWRITE			/* Serial change Ok	*/
+#define CFG_ENV_ADDR	(CFG_FLASH_BASE + CFG_MONITOR_LEN)
+
+/*------------------------------------------------------------------------
+ * CONSOLE
+ *----------------------------------------------------------------------*/
+#if defined(CONFIG_CONSOLE_JTAG)
+#define CFG_NIOS_CONSOLE	0x021208b0	/* JTAG UART base addr	*/
+#else
+#define CFG_NIOS_CONSOLE	0x02120840	/* UART base addr	*/
+#endif
+
+#define CFG_NIOS_FIXEDBAUD	1		/* Baudrate is fixed	*/
+#define CONFIG_BAUDRATE		115200		/* Initial baudrate	*/
+#define CFG_BAUDRATE_TABLE	{115200}	/* It's fixed ;-)	*/
+
+#define CFG_CONSOLE_INFO_QUIET	1		/* Suppress console info*/
+
+/*------------------------------------------------------------------------
+ * EPCS Device -- None for stratix.
+ *----------------------------------------------------------------------*/
+#undef CFG_NIOS_EPCSBASE
+
+/*------------------------------------------------------------------------
+ * DEBUG
+ *----------------------------------------------------------------------*/
+#undef CONFIG_ROM_STUBS				/* Stubs not in ROM	*/
+
+/*------------------------------------------------------------------------
+ * TIMEBASE --
+ *
+ * The high res timer defaults to 1 msec. Since it includes the period
+ * registers, we can slow it down to 10 msec using TMRCNT. If the default
+ * period is acceptable, TMRCNT can be left undefined.
+ *----------------------------------------------------------------------*/
+#define CFG_NIOS_TMRBASE	0x02120820	/* Tick timer base addr */
+#define CFG_NIOS_TMRIRQ		3		/* Timer IRQ num	*/
+#define CFG_NIOS_TMRMS		10		/* 10 msec per tick	*/
+#define CFG_NIOS_TMRCNT (CFG_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000))
+#define CFG_HZ		(CONFIG_SYS_CLK_FREQ/(CFG_NIOS_TMRCNT + 1))
+
+/*------------------------------------------------------------------------
+ * STATUS LED -- Provides a simple blinking led. For Nios2 each board
+ * must implement its own led routines -- since leds are board-specific.
+ *----------------------------------------------------------------------*/
+#define CFG_LEDPIO_ADDR		0x02120870	/* LED PIO base addr	*/
+#define CONFIG_STATUS_LED			/* Enable status driver */
+
+#define STATUS_LED_BIT		1		/* Bit-0 on PIO		*/
+#define STATUS_LED_STATE	1		/* Blinking		*/
+#define STATUS_LED_PERIOD	(500/CFG_NIOS_TMRMS) /* Every 500 msec	*/
+
+/*------------------------------------------------------------------------
+ * ETHERNET -- The header file for the SMC91111 driver hurts my eyes ...
+ * and really doesn't need any additional clutter. So I choose the lazy
+ * way out to avoid changes there -- define the base address to ensure
+ * cache bypass so there's no need to monkey with inx/outx macros.
+ *----------------------------------------------------------------------*/
+#define CONFIG_SMC91111_BASE	0x82110300	/* Base addr (bypass)	*/
+#define CONFIG_DRIVER_SMC91111			/* Using SMC91c111	*/
+#undef	CONFIG_SMC91111_EXT_PHY			/* Internal PHY		*/
+#define CONFIG_SMC_USE_32_BIT			/* 32-bit interface	*/
+
+#define CONFIG_ETHADDR		08:00:3e:26:0a:5b
+#define CONFIG_NETMASK		255.255.255.0
+#define CONFIG_IPADDR		192.168.2.21
+#define CONFIG_SERVERIP		192.168.2.16
+
+/*------------------------------------------------------------------------
+ * COMMANDS
+ *----------------------------------------------------------------------*/
+#define CONFIG_COMMANDS		(CFG_CMD_BDI	| \
+				 CFG_CMD_DHCP	| \
+				 CFG_CMD_ECHO	| \
+				 CFG_CMD_ENV	| \
+				 CFG_CMD_FLASH	| \
+				 CFG_CMD_IMI	| \
+				 CFG_CMD_IRQ	| \
+				 CFG_CMD_LOADS	| \
+				 CFG_CMD_LOADB	| \
+				 CFG_CMD_MEMORY | \
+				 CFG_CMD_MISC	| \
+				 CFG_CMD_NET	| \
+				 CFG_CMD_PING	| \
+				 CFG_CMD_RUN	| \
+				 CFG_CMD_SAVES	)
+#include <cmd_confdefs.h>
+
+/*------------------------------------------------------------------------
+ * MISC
+ *----------------------------------------------------------------------*/
+#define CFG_LONGHELP				/* Provide extended help*/
+#define CFG_PROMPT		"==> "		/* Command prompt	*/
+#define CFG_CBSIZE		256		/* Console I/O buf size */
+#define CFG_MAXARGS		16		/* Max command args	*/
+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot arg buf size	*/
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print buf size */
+#define CFG_LOAD_ADDR		CFG_SDRAM_BASE	/* Default load address */
+#define CFG_MEMTEST_START	CFG_SDRAM_BASE	/* Start addr for test	*/
+#define CFG_MEMTEST_END		CFG_INIT_SP - 0x00020000
+
+#define CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2	"> "
+
+#endif	/* __CONFIG_H */
diff --git a/include/configs/EP1S40.h b/include/configs/EP1S40.h
new file mode 100644
index 0000000000..976e79acb6
--- /dev/null
+++ b/include/configs/EP1S40.h
@@ -0,0 +1,193 @@
+/*
+ * (C) Copyright 2005, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*------------------------------------------------------------------------
+ * BOARD/CPU
+ *----------------------------------------------------------------------*/
+#define CONFIG_EP1S40		1		/* EP1S40 board		*/
+#define CONFIG_SYS_CLK_FREQ	50000000	/* 50 MHz core clk	*/
+
+#define CFG_RESET_ADDR		0x00000000	/* Hard-reset address	*/
+#define CFG_EXCEPTION_ADDR	0x01000020	/* Exception entry point*/
+#define CFG_NIOS_SYSID_BASE	0x021208b8	/* System id address	*/
+
+/*------------------------------------------------------------------------
+ * CACHE -- the following will support II/s and II/f. The II/s does not
+ * have dcache, so the cache instructions will behave as NOPs.
+ *----------------------------------------------------------------------*/
+#define CFG_ICACHE_SIZE		4096		/* 4 KByte total	*/
+#define CFG_ICACHELINE_SIZE	32		/* 32 bytes/line	*/
+#define CFG_DCACHE_SIZE		2048		/* 2 KByte (II/f)	*/
+#define CFG_DCACHELINE_SIZE	4		/* 4 bytes/line (II/f)	*/
+
+/*------------------------------------------------------------------------
+ * MEMORY BASE ADDRESSES
+ *----------------------------------------------------------------------*/
+#define CFG_FLASH_BASE		0x00000000	/* FLASH base addr	*/
+#define CFG_FLASH_SIZE		0x00800000	/* 8 MByte		*/
+#define CFG_SDRAM_BASE		0x01000000	/* SDRAM base addr	*/
+#define CFG_SDRAM_SIZE		0x01000000	/* 16 MByte		*/
+#define CFG_SRAM_BASE		0x02000000	/* SRAM base addr	*/
+#define CFG_SRAM_SIZE		0x00100000	/* 1 MB			*/
+
+/*------------------------------------------------------------------------
+ * MEMORY ORGANIZATION
+ *	-Monitor at top.
+ *	-The heap is placed below the monitor.
+ *	-Global data is placed below the heap.
+ *	-The stack is placed below global data (&grows down).
+ *----------------------------------------------------------------------*/
+#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256k		*/
+#define CFG_GBL_DATA_SIZE	128		/* Global data size rsvd*/
+#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 256*1024) /* 256k heap */
+
+#define CFG_MONITOR_BASE	TEXT_BASE
+#define CFG_MALLOC_BASE		(CFG_MONITOR_BASE - CFG_MALLOC_LEN)
+#define CFG_GBL_DATA_OFFSET	(CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP		CFG_GBL_DATA_OFFSET
+
+/*------------------------------------------------------------------------
+ * FLASH (AM29LV065D)
+ *----------------------------------------------------------------------*/
+#define CFG_MAX_FLASH_SECT	128		/* Max # sects per bank */
+#define CFG_MAX_FLASH_BANKS	1		/* Max # of flash banks */
+#define CFG_FLASH_ERASE_TOUT	8000		/* Erase timeout (msec) */
+#define CFG_FLASH_WRITE_TOUT	100		/* Write timeout (msec) */
+
+/*------------------------------------------------------------------------
+ * ENVIRONMENT -- Put environment in sector CFG_MONITOR_LEN above
+ * CFG_FLASH_BASE, since we assume that u-boot is stored at the bottom
+ * of flash memory. This will keep the environment in user region
+ * of flash. NOTE: the monitor length must be multiple of sector size
+ * (which is common practice).
+ *----------------------------------------------------------------------*/
+#define CFG_ENV_IS_IN_FLASH	1		/* Environment in flash */
+#define CFG_ENV_SIZE		(64 * 1024)	/* 64 KByte (1 sector)	*/
+#define CONFIG_ENV_OVERWRITE			/* Serial change Ok	*/
+#define CFG_ENV_ADDR	(CFG_FLASH_BASE + CFG_MONITOR_LEN)
+
+/*------------------------------------------------------------------------
+ * CONSOLE
+ *----------------------------------------------------------------------*/
+#if defined(CONFIG_CONSOLE_JTAG)
+#define CFG_NIOS_CONSOLE	0x021208b0	/* JTAG UART base addr	*/
+#else
+#define CFG_NIOS_CONSOLE	0x02120840	/* UART base addr	*/
+#endif
+
+#define CFG_NIOS_FIXEDBAUD	1		/* Baudrate is fixed	*/
+#define CONFIG_BAUDRATE		115200		/* Initial baudrate	*/
+#define CFG_BAUDRATE_TABLE	{115200}	/* It's fixed ;-)	*/
+
+#define CFG_CONSOLE_INFO_QUIET	1		/* Suppress console info*/
+
+/*------------------------------------------------------------------------
+ * EPCS Device -- None for stratix.
+ *----------------------------------------------------------------------*/
+#undef CFG_NIOS_EPCSBASE
+
+/*------------------------------------------------------------------------
+ * DEBUG
+ *----------------------------------------------------------------------*/
+#undef CONFIG_ROM_STUBS				/* Stubs not in ROM	*/
+
+/*------------------------------------------------------------------------
+ * TIMEBASE --
+ *
+ * The high res timer defaults to 1 msec. Since it includes the period
+ * registers, we can slow it down to 10 msec using TMRCNT. If the default
+ * period is acceptable, TMRCNT can be left undefined.
+ *----------------------------------------------------------------------*/
+#define CFG_NIOS_TMRBASE	0x02120820	/* Tick timer base addr */
+#define CFG_NIOS_TMRIRQ		3		/* Timer IRQ num	*/
+#define CFG_NIOS_TMRMS		10		/* 10 msec per tick	*/
+#define CFG_NIOS_TMRCNT (CFG_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000))
+#define CFG_HZ		(CONFIG_SYS_CLK_FREQ/(CFG_NIOS_TMRCNT + 1))
+
+/*------------------------------------------------------------------------
+ * STATUS LED -- Provides a simple blinking led. For Nios2 each board
+ * must implement its own led routines -- since leds are board-specific.
+ *----------------------------------------------------------------------*/
+#define CFG_LEDPIO_ADDR		0x02120870	/* LED PIO base addr	*/
+#define CONFIG_STATUS_LED			/* Enable status driver */
+
+#define STATUS_LED_BIT		1		/* Bit-0 on PIO		*/
+#define STATUS_LED_STATE	1		/* Blinking		*/
+#define STATUS_LED_PERIOD	(500/CFG_NIOS_TMRMS) /* Every 500 msec	*/
+
+/*------------------------------------------------------------------------
+ * ETHERNET -- The header file for the SMC91111 driver hurts my eyes ...
+ * and really doesn't need any additional clutter. So I choose the lazy
+ * way out to avoid changes there -- define the base address to ensure
+ * cache bypass so there's no need to monkey with inx/outx macros.
+ *----------------------------------------------------------------------*/
+#define CONFIG_SMC91111_BASE	0x82110300	/* Base addr (bypass)	*/
+#define CONFIG_DRIVER_SMC91111			/* Using SMC91c111	*/
+#undef	CONFIG_SMC91111_EXT_PHY			/* Internal PHY		*/
+#define CONFIG_SMC_USE_32_BIT			/* 32-bit interface	*/
+
+#define CONFIG_ETHADDR		08:00:3e:26:0a:5b
+#define CONFIG_NETMASK		255.255.255.0
+#define CONFIG_IPADDR		192.168.2.21
+#define CONFIG_SERVERIP		192.168.2.16
+
+/*------------------------------------------------------------------------
+ * COMMANDS
+ *----------------------------------------------------------------------*/
+#define CONFIG_COMMANDS		(CFG_CMD_BDI	| \
+				 CFG_CMD_DHCP	| \
+				 CFG_CMD_ECHO	| \
+				 CFG_CMD_ENV	| \
+				 CFG_CMD_FLASH	| \
+				 CFG_CMD_IMI	| \
+				 CFG_CMD_IRQ	| \
+				 CFG_CMD_LOADS	| \
+				 CFG_CMD_LOADB	| \
+				 CFG_CMD_MEMORY | \
+				 CFG_CMD_MISC	| \
+				 CFG_CMD_NET	| \
+				 CFG_CMD_PING	| \
+				 CFG_CMD_RUN	| \
+				 CFG_CMD_SAVES	)
+#include <cmd_confdefs.h>
+
+/*------------------------------------------------------------------------
+ * MISC
+ *----------------------------------------------------------------------*/
+#define CFG_LONGHELP				/* Provide extended help*/
+#define CFG_PROMPT		"==> "		/* Command prompt	*/
+#define CFG_CBSIZE		256		/* Console I/O buf size */
+#define CFG_MAXARGS		16		/* Max command args	*/
+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot arg buf size	*/
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print buf size */
+#define CFG_LOAD_ADDR		CFG_SDRAM_BASE	/* Default load address */
+#define CFG_MEMTEST_START	CFG_SDRAM_BASE	/* Start addr for test	*/
+#define CFG_MEMTEST_END		CFG_INIT_SP - 0x00020000
+
+#define CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2	"> "
+
+#endif	/* __CONFIG_H */
diff --git a/include/configs/PK1C20.h b/include/configs/PK1C20.h
index 91e95186a2..83a7ec27b4 100644
--- a/include/configs/PK1C20.h
+++ b/include/configs/PK1C20.h
@@ -32,7 +32,7 @@
 
 #define CFG_RESET_ADDR		0x00000000	/* Hard-reset address	*/
 #define CFG_EXCEPTION_ADDR	0x01000020	/* Exception entry point*/
-#define CFG_NIOS_SYSID_BASE	0x00920828	/* System id address	*/
+#define CFG_NIOS_SYSID_BASE	0x021208b8	/* System id address	*/
 #define CONFIG_BOARD_EARLY_INIT_F 1	/* enable early board-spec. init*/
 
 /*------------------------------------------------------------------------
@@ -51,7 +51,7 @@
 #define CFG_FLASH_SIZE		0x00800000	/* 8 MByte		*/
 #define CFG_SDRAM_BASE		0x01000000	/* SDRAM base addr	*/
 #define CFG_SDRAM_SIZE		0x01000000	/* 16 MByte		*/
-#define CFG_SRAM_BASE		0x00800000	/* SRAM base addr	*/
+#define CFG_SRAM_BASE		0x02000000	/* SRAM base addr	*/
 #define CFG_SRAM_SIZE		0x00100000	/* 1 MB (only 1M mapped)*/
 
 /*------------------------------------------------------------------------
@@ -61,7 +61,7 @@
  *	-Global data is placed below the heap.
  *	-The stack is placed below global data (&grows down).
  *----------------------------------------------------------------------*/
-#define CFG_MONITOR_LEN		(128 * 1024)	/* Reserve 128k		*/
+#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 128k		*/
 #define CFG_GBL_DATA_SIZE	128		/* Global data size rsvd*/
 #define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128*1024)
 
@@ -95,9 +95,9 @@
  * CONSOLE
  *----------------------------------------------------------------------*/
 #if defined(CONFIG_CONSOLE_JTAG)
-#define CFG_NIOS_CONSOLE	0x00920820	/* JTAG UART base addr	*/
+#define CFG_NIOS_CONSOLE	0x021208b0	/* JTAG UART base addr	*/
 #else
-#define CFG_NIOS_CONSOLE	0x009208a0	/* UART base addr	*/
+#define CFG_NIOS_CONSOLE	0x02120840	/* UART base addr	*/
 #endif
 
 #define CFG_NIOS_FIXEDBAUD	1		/* Baudrate is fixed	*/
@@ -110,9 +110,9 @@
  * EPCS Device -- wne CFG_NIOS_EPCSBASE is defined code/commands for
  * epcs device access is enabled. The base address is the epcs
  * _register_ base address, NOT THE ADDRESS OF THE MEMORY BLOCK.
- * The register base is currently at offset 0x400 from the memory base.
+ * The register base is currently at offset 0x600 from the memory base.
  *----------------------------------------------------------------------*/
-#define CFG_NIOS_EPCSBASE	0x00900400	/* EPCS register base	*/
+#define CFG_NIOS_EPCSBASE	0x02100200	/* EPCS register base	*/
 
 /*------------------------------------------------------------------------
  * DEBUG
@@ -126,7 +126,7 @@
  * registers, we can slow it down to 10 msec using TMRCNT. If the default
  * period is acceptable, TMRCNT can be left undefined.
  *----------------------------------------------------------------------*/
-#define CFG_NIOS_TMRBASE	0x00920860	/* Tick timer base addr */
+#define CFG_NIOS_TMRBASE	0x02120820	/* Tick timer base addr */
 #define CFG_NIOS_TMRIRQ		3		/* Timer IRQ num	*/
 #define CFG_NIOS_TMRMS		10		/* 10 msec per tick	*/
 #define CFG_NIOS_TMRCNT (CFG_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000))
@@ -137,7 +137,7 @@
  * must implement its own led routines -- leds are, after all,
  * board-specific, no?
  *----------------------------------------------------------------------*/
-#define CFG_LEDPIO_ADDR		0x00920840	/* LED PIO base addr	*/
+#define CFG_LEDPIO_ADDR		0x02120870	/* LED PIO base addr	*/
 #define CONFIG_STATUS_LED			/* Enable status driver */
 
 #define STATUS_LED_BIT		1		/* Bit-0 on PIO		*/
@@ -150,7 +150,7 @@
  * way out to avoid changes there -- define the base address to ensure
  * cache bypass so there's no need to monkey with inx/outx macros.
  *----------------------------------------------------------------------*/
-#define CONFIG_SMC91111_BASE	0x80910300	/* Base addr (bypass)	*/
+#define CONFIG_SMC91111_BASE	0x82110300	/* Base addr (bypass)	*/
 #define CONFIG_DRIVER_SMC91111			/* Using SMC91c111	*/
 #undef	CONFIG_SMC91111_EXT_PHY			/* Internal PHY		*/
 #define CONFIG_SMC_USE_32_BIT			/* 32-bit interface	*/
diff --git a/include/configs/TB5200.h b/include/configs/TB5200.h
new file mode 100644
index 0000000000..8a6e5a61b7
--- /dev/null
+++ b/include/configs/TB5200.h
@@ -0,0 +1,507 @@
+/*
+ * (C) Copyright 2003-2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2004-2006
+ * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MPC5xxx		1	/* This is an MPC5xxx CPU */
+#define CONFIG_MPC5200		1	/* (more precisely an MPC5200 CPU) */
+#define CONFIG_TQM5200		1	/* ... on TQM5200 module */
+#define CONFIG_TB5200		1	/* ... on a TB5200 base board */
+
+#define CFG_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz */
+
+#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
+#define BOOTFLAG_WARM		0x02	/* Software reboot	     */
+
+#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#endif
+
+/*
+ * Serial console configuration
+ */
+#define CONFIG_PSC_CONSOLE	1	/* default console is on PSC1 */
+#define CONFIG_SERIAL_MULTI	1	/* support multiple consoles */
+#define CONFIG_PSC_CONSOLE2	6	/* second console is on PSC6 */
+#define CONFIG_BAUDRATE		115200	/* ... at 115200 bps */
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+
+/*
+ * Video console
+ */
+#if 1
+#define CONFIG_VIDEO
+#define CONFIG_VIDEO_SM501
+#define CONFIG_VIDEO_SM501_32BPP
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_CONSOLE_EXTRA_INFO
+#define CONFIG_VIDEO_SW_CURSOR
+#define CONFIG_SPLASH_SCREEN
+#define CFG_CONSOLE_IS_IN_ENV
+#endif
+
+#ifdef CONFIG_VIDEO
+#define ADD_BMP_CMD		CFG_CMD_BMP
+#else
+#define ADD_BMP_CMD		0
+#endif
+
+/* Partitions */
+#define CONFIG_MAC_PARTITION
+#define CONFIG_DOS_PARTITION
+#define CONFIG_ISO_PARTITION
+
+/* USB */
+#define CONFIG_USB_OHCI
+#define ADD_USB_CMD		CFG_CMD_USB | CFG_CMD_FAT
+#define CONFIG_USB_STORAGE
+
+/* POST support */
+#define CONFIG_POST		(CFG_POST_MEMORY   | \
+				 CFG_POST_CPU	   | \
+				 CFG_POST_I2C)
+
+#ifdef CONFIG_POST
+#define CFG_CMD_POST_DIAG CFG_CMD_DIAG
+/* preserve space for the post_word at end of on-chip SRAM */
+#define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4
+#else
+#define CFG_CMD_POST_DIAG 0
+#endif
+
+/* IDE */
+#define ADD_IDE_CMD		(CFG_CMD_IDE | CFG_CMD_FAT | CFG_CMD_EXT2)
+
+/*
+ * Supported commands
+ */
+#define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
+				ADD_BMP_CMD	| \
+				ADD_IDE_CMD	| \
+				ADD_PCI_CMD	| \
+				ADD_USB_CMD	| \
+				CFG_CMD_ASKENV	| \
+				CFG_CMD_DATE	| \
+				CFG_CMD_DHCP	| \
+				CFG_CMD_ECHO	| \
+				CFG_CMD_EEPROM	| \
+				CFG_CMD_I2C	| \
+				CFG_CMD_JFFS2	| \
+				CFG_CMD_MII	| \
+				CFG_CMD_NFS	| \
+				CFG_CMD_PING	| \
+				CFG_CMD_POST_DIAG | \
+				CFG_CMD_REGINFO | \
+				CFG_CMD_SNTP	| \
+				CFG_CMD_BSP)
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#define	CONFIG_TIMESTAMP		/* display image timestamps */
+
+#if (TEXT_BASE == 0xFC000000)		/* Boot low */
+#   define CFG_LOWBOOT		1
+#endif
+
+/*
+ * Autobooting
+ */
+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds */
+
+#define CONFIG_PREBOOT	"echo;" \
+	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+	"echo"
+
+#undef	CONFIG_BOOTARGS
+
+#if defined(CONFIG_TQM5200_B)
+#define CONFIG_EXTRA_ENV_SETTINGS					\
+	"netdev=eth0\0"							\
+	"rootpath=/opt/eldk/ppc_6xx\0"					\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=${serverip}:${rootpath}\0"			\
+	"addip=setenv bootargs ${bootargs} "				\
+		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
+		":${hostname}:${netdev}:off panic=1\0"			\
+	"flash_self=run ramargs addip;"					\
+		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
+	"flash_nfs=run nfsargs addip;"					\
+		"bootm ${kernel_addr}\0"				\
+	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
+	"bootfile=/tftpboot/tqm5200/uImage\0"				\
+	"load=tftp 200000 ${u-boot}\0"					\
+	"u-boot=/tftpboot/tqm5200/u-boot.bin\0"				\
+	"update=protect off FC000000 FC07FFFF;"				\
+		"erase FC000000 FC07FFFF;"				\
+		"cp.b 200000 FC000000 ${filesize};"			\
+		"protect on FC000000 FC07FFFF\0"			\
+	""
+#else
+#define CONFIG_EXTRA_ENV_SETTINGS					\
+	"netdev=eth0\0"							\
+	"rootpath=/opt/eldk/ppc_6xx\0"					\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=${serverip}:${rootpath}\0"			\
+	"addip=setenv bootargs ${bootargs} "				\
+		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
+		":${hostname}:${netdev}:off panic=1\0"			\
+	"flash_self=run ramargs addip;"					\
+		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
+	"flash_nfs=run nfsargs addip;"					\
+		"bootm ${kernel_addr}\0"				\
+	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
+	"bootfile=/tftpboot/tqm5200/uImage\0"				\
+	"load=tftp 200000 $(u-boot)\0"					\
+	"u-boot=/tftpboot/tqm5200/u-boot.bin\0"				\
+	"update=protect off FC000000 FC05FFFF;"				\
+		"erase FC000000 FC05FFFF;"				\
+		"cp.b 200000 FC000000 ${filesize};"			\
+		"protect on FC000000 FC05FFFF\0"			\
+	""
+#endif /* CONFIG_TQM5200_B */
+
+#define CONFIG_BOOTCOMMAND	"run net_nfs"
+
+/*
+ * IPB Bus clocking configuration.
+ */
+#define CFG_IPBSPEED_133		/* define for 133MHz speed */
+
+#if defined(CFG_IPBSPEED_133)
+/*
+ * PCI Bus clocking configuration
+ *
+ * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
+ * CFG_IPBSPEED_133 is defined. This is because a PCI Clock of 66 MHz yet hasn't
+ * been tested with a IPB Bus Clock of 66 MHz.
+ */
+#define CFG_PCISPEED_66			/* define for 66MHz speed */
+#endif
+
+/*
+ * I2C configuration
+ */
+#define CONFIG_HARD_I2C		1	/* I2C with hardware support */
+#define CFG_I2C_MODULE		2	/* Select I2C module #2 */
+
+/*
+ * I2C clock frequency
+ *
+ * Please notice, that the resulting clock frequency could differ from the
+ * configured value. This is because the I2C clock is derived from system
+ * clock over a frequency divider with only a few divider values. U-boot
+ * calculates the best approximation for CFG_I2C_SPEED. However the calculated
+ * approximation allways lies below the configured value, never above.
+ */
+#define CFG_I2C_SPEED		100000 /* 100 kHz */
+#define CFG_I2C_SLAVE		0x7F
+
+/*
+ * EEPROM configuration for onboard EEPROM M24C32 (M24C64 should work
+ * also). For other EEPROMs configuration should be verified. On Mini-FAP the
+ * EEPROM (24C64) is on the same I2C address (but on other I2C bus), so the
+ * same configuration could be used.
+ */
+#define CFG_I2C_EEPROM_ADDR		0x50	/* 1010000x */
+#define CFG_I2C_EEPROM_ADDR_LEN		2
+#define CFG_EEPROM_PAGE_WRITE_BITS	5	/* =32 Bytes per write */
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	20
+
+/* List of I2C addresses to be verified by POST */
+#undef I2C_ADDR_LIST
+#define I2C_ADDR_LIST	{	CFG_I2C_EEPROM_ADDR,	\
+				CFG_I2C_RTC_ADDR,	\
+				CFG_I2C_SLAVE }
+
+/*
+ * Flash configuration
+ */
+#define CFG_FLASH_BASE		TEXT_BASE /* 0xFC000000 */
+
+/* use CFI flash driver */
+#define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER	1	/* Use the common driver */
+#define CFG_FLASH_BANKS_LIST	{ CFG_BOOTCS_START }
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_SIZE		0x04000000 /* 64 MByte */
+#define CFG_MAX_FLASH_SECT	512	/* max num of sects on one chip */
+#define CFG_FLASH_USE_BUFFER_WRITE	1
+
+#if !defined(CFG_LOWBOOT)
+#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x00760000 + 0x00800000)
+#else	/* CFG_LOWBOOT */
+#if defined(CONFIG_TQM5200_B)
+#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x00080000)
+#else
+#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x00060000)
+#endif /* CONFIG_TQM5200_B */
+#endif	/* CFG_LOWBOOT */
+#define CFG_MAX_FLASH_BANKS	1	/* max num of flash banks
+					   (= chip selects) */
+
+/* Dynamic MTD partition support */
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=TQM5200-0"
+#if defined(CONFIG_TQM5200_B)
+#define MTDPARTS_DEFAULT	"mtdparts=TQM5200-0:768k(firmware),"	\
+						"1280k(kernel),"	\
+						"2m(initrd),"		\
+						"4m(small-fs),"		\
+						"16m(big-fs),"		\
+						"8m(misc)"
+#else
+#define MTDPARTS_DEFAULT	"mtdparts=TQM5200-0:640k(firmware),"	\
+						"1408k(kernel),"	\
+						"2m(initrd),"		\
+						"4m(small-fs),"		\
+						"16m(big-fs),"		\
+						"8m(misc)"
+#endif /* CONFIG_TQM5200_B */
+
+/*
+ * Environment settings
+ */
+#define CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_SIZE		0x10000
+#if defined(CONFIG_TQM5200_B)
+#define CFG_ENV_SECT_SIZE	0x40000
+#else
+#define CFG_ENV_SECT_SIZE	0x20000
+#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#endif /* CONFIG_TQM5200_B */
+
+/*
+ * Memory map
+ */
+#define CFG_MBAR		0xF0000000
+#define CFG_SDRAM_BASE		0x00000000
+#define CFG_DEFAULT_MBAR	0x80000000
+
+/* Use ON-Chip SRAM until RAM will be available */
+#define CFG_INIT_RAM_ADDR	MPC5XXX_SRAM
+#ifdef CONFIG_POST
+/* preserve space for the post_word at end of on-chip SRAM */
+#define CFG_INIT_RAM_END	MPC5XXX_SRAM_POST_SIZE
+#else
+#define CFG_INIT_RAM_END	MPC5XXX_SRAM_SIZE
+#endif
+
+
+#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_BASE	TEXT_BASE
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#   define CFG_RAMBOOT		1
+#endif
+
+#if defined(CONFIG_TQM5200_B)
+#define CFG_MONITOR_LEN		(512 << 10)	/* Reserve 512 kB for Monitor	*/
+#else
+#define CFG_MONITOR_LEN		(384 << 10)	/* Reserve 384 kB for Monitor	*/
+#endif /* CONFIG_TQM5200_B */
+#define CFG_MALLOC_LEN		(256 << 10)	/* Reserve 256 kB for malloc()	*/
+#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+
+/*
+ * Ethernet configuration
+ */
+#define CONFIG_MPC5xxx_FEC	1
+/*
+ * Define CONFIG_FEC_10MBIT to force FEC at 10Mb
+ */
+/* #define CONFIG_FEC_10MBIT 1 */
+#define CONFIG_PHY_ADDR		0x00
+
+/*
+ * GPIO configuration
+ *
+ * use pin gpio_wkup_6 as second SDRAM chip select (mem_cs1):
+ *	Bit 0 (mask: 0x80000000): 1
+ * use ALT CAN position: Bits 2-3 (mask: 0x30000000):
+ *	00 -> No Alternatives, CAN1/2 on PSC2 according to PSC2 setting.
+ *	01 -> CAN1 on I2C1, CAN2 on Tmr0/1.
+ *	      Use for REV200 STK52XX boards. Do not use with REV100 modules
+ *	      (because, there I2C1 is used as I2C bus)
+ * use PSC1 as UART: Bits 28-31 (mask: 0x00000007): 0100
+ * use PSC2 as CAN: Bits 25:27 (mask: 0x00000030)
+ *	000 -> All PSC2 pins are GIOPs
+ *	001 -> CAN1/2 on PSC2 pins
+ *	       Use for REV100 STK52xx boards
+ * use PSC3: Bits 20:23 (mask: 0x00000300):
+ *      0001 -> USB2
+ *      0000 -> GPIO
+ * use PSC6:
+ *   on STK52xx:
+ *	use as UART. Pins PSC6_0 to PSC6_3 are used.
+ *	Bits 9:11 (mask: 0x00700000):
+ *	   101 -> PSC6 : Extended POST test is not available
+ *   on MINI-FAP and TQM5200_IB:
+ *	use PSC6_0 to PSC6_3 as GPIO: Bits 9:11 (mask: 0x00700000):
+ *	   000 -> PSC6 could not be used as UART, CODEC or IrDA
+ *   GPIO on PSC6_3 is used in post_hotkeys_pressed() to enable extended POST
+ *   tests.
+ */
+#define CFG_GPS_PORT_CONFIG	0x81500114
+
+/*
+ * RTC configuration
+ */
+#define CONFIG_RTC_M41T11	1
+#define CFG_I2C_RTC_ADDR	0x68
+#define CFG_M41T11_BASE_YEAR	1900    /* because Linux uses the same base
+					   year */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP			/* undef to save memory	    */
+#define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
+#else
+#define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS		16	/* max number of command args	*/
+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+
+/* Enable an alternate, more extensive memory test */
+#define CFG_ALT_MEMTEST
+
+#define CFG_MEMTEST_START	0x00100000	/* memtest works on */
+#define CFG_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
+
+#define CFG_LOAD_ADDR		0x100000	/* default load address */
+
+#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+
+/*
+ * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined,
+ * which is normally part of the default commands (CFV_CMD_DFL)
+ */
+#define CONFIG_LOOPW
+
+/*
+ * Various low-level settings
+ */
+#if defined(CONFIG_MPC5200)
+#define CFG_HID0_INIT		HID0_ICE | HID0_ICFI
+#define CFG_HID0_FINAL		HID0_ICE
+#else
+#define CFG_HID0_INIT		0
+#define CFG_HID0_FINAL		0
+#endif
+
+#define CFG_BOOTCS_START	CFG_FLASH_BASE
+#define CFG_BOOTCS_SIZE		CFG_FLASH_SIZE
+#ifdef CFG_PCISPEED_66
+#define CFG_BOOTCS_CFG		0x0008DF30 /* for pci_clk  = 66 MHz */
+#else
+#define CFG_BOOTCS_CFG		0x0004DF30 /* for pci_clk = 33 MHz */
+#endif
+#define CFG_CS0_START		CFG_FLASH_BASE
+#define CFG_CS0_SIZE		CFG_FLASH_SIZE
+
+#define CONFIG_LAST_STAGE_INIT
+
+/*
+ * SRAM - Do not map below 2 GB in address space, because this area is used
+ * for SDRAM autosizing.
+ */
+#define CFG_CS2_START		0xE5000000
+#define CFG_CS2_SIZE		0x100000	/* 1 MByte */
+#define CFG_CS2_CFG		0x0004D930
+
+/*
+ * Grafic controller - Do not map below 2 GB in address space, because this
+ * area is used for SDRAM autosizing.
+ */
+#define SM501_FB_BASE		0xE0000000
+#define CFG_CS1_START		(SM501_FB_BASE)
+#define CFG_CS1_SIZE		0x4000000	/* 64 MByte */
+#define CFG_CS1_CFG		0x8F48FF70
+#define SM501_MMIO_BASE		CFG_CS1_START + 0x03E00000
+
+#define CFG_CS_BURST		0x00000000
+#define CFG_CS_DEADCYCLE	0x33333311	/* 1 dead cycle for flash and SM501 */
+
+#define CFG_RESET_ADDRESS	0xff000000
+
+/*-----------------------------------------------------------------------
+ * USB stuff
+ *-----------------------------------------------------------------------
+ */
+#define CONFIG_USB_CLOCK	0x0001BBBB
+#define CONFIG_USB_CONFIG	0x00001000
+
+/*-----------------------------------------------------------------------
+ * IDE/ATA stuff Supports IDE harddisk
+ *-----------------------------------------------------------------------
+ */
+
+#undef	CONFIG_IDE_8xx_PCCARD		/* Use IDE with PC Card Adapter */
+
+#undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE	 not supported	*/
+#undef	CONFIG_IDE_LED			/* LED	 for ide not supported	*/
+
+#define CONFIG_IDE_RESET		/* reset for ide supported	*/
+#define CONFIG_IDE_PREINIT
+
+#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CFG_IDE_MAXDEVICE	2	/* max. 2 drives per IDE bus	*/
+
+#define CFG_ATA_IDE0_OFFSET	0x0000
+
+#define CFG_ATA_BASE_ADDR	MPC5XXX_ATA
+
+/* Offset for data I/O			*/
+#define CFG_ATA_DATA_OFFSET	(0x0060)
+
+/* Offset for normal register accesses	*/
+#define CFG_ATA_REG_OFFSET	(CFG_ATA_DATA_OFFSET)
+
+/* Offset for alternate registers	*/
+#define CFG_ATA_ALT_OFFSET	(0x005C)
+
+/* Interval between registers						     */
+#define CFG_ATA_STRIDE		4
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index 6020998ae2..be83b67672 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -2,7 +2,7 @@
  * (C) Copyright 2003-2005
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
- * (C) Copyright 2004-2005
+ * (C) Copyright 2004-2006
  * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de
  *
  * See file CREDITS for list of people who contributed to this
@@ -32,28 +32,30 @@
  * (easy to change)
  */
 
-#define CONFIG_MPC5xxx		1	/* This is an MPC5xxx CPU */
-#define CONFIG_MPC5200		1	/* (more precisely an MPC5200 CPU) */
-#define CONFIG_TQM5200		1	/* ... on TQM5200 module */
-#undef CONFIG_TQM5200_REV100		/*  define for revision 100 modules */
-#define CONFIG_STK52XX		1	/* ... on a STK52XX base board */
-#define CONFIG_STK52XX_REV100	1	/*  define for revision 100 baseboards */
+#define CONFIG_MPC5xxx		1	/* This is an MPC5xxx CPU		*/
+#define CONFIG_MPC5200		1	/* (more precisely an MPC5200 CPU)	*/
+#define CONFIG_TQM5200		1	/* ... on TQM5200 module		*/
+#undef CONFIG_TQM5200_REV100		/*  define for revision 100 modules	*/
 
-#define CFG_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz */
+#ifndef CONFIG_CAM5200			/* On a Cameron board or ...		*/
+#define CONFIG_STK52XX		1	/* ... on a STK52XX board		*/
+#endif
+
+#define CFG_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz		*/
 
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
-#define BOOTFLAG_WARM		0x02	/* Software reboot	     */
+#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH 	*/
+#define BOOTFLAG_WARM		0x02	/* Software reboot			*/
 
-#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
+#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs			*/
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
 #endif
 
 /*
  * Serial console configuration
  */
-#define CONFIG_PSC_CONSOLE	1	/* console is on PSC1 */
-#define CONFIG_BAUDRATE		115200	/* ... at 115200 bps */
+#define CONFIG_PSC_CONSOLE	1	/* console is on PSC1			*/
+#define CONFIG_BAUDRATE		115200	/* ... at 115200 bps			*/
 #define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 #ifdef CONFIG_STK52XX
@@ -83,7 +85,7 @@
 #define CONFIG_PCI_IO_SIZE	0x01000000
 
 #define CONFIG_NET_MULTI	1
-#define CONFIG_EEPRO100
+#define CONFIG_EEPRO100		1
 #define CFG_RX_ETH_BUFFER	8  /* use 8 rx buffer on eepro100  */
 #define CONFIG_NS8382X		1
 #endif	/* CONFIG_STK52XX */
@@ -97,7 +99,7 @@
 /*
  * Video console
  */
-#if 1
+#ifndef CONFIG_TQM5200S		/* No graphics controller on TQM5200S */
 #define CONFIG_VIDEO
 #define CONFIG_VIDEO_SM501
 #define CONFIG_VIDEO_SM501_32BPP
@@ -130,10 +132,12 @@
 #define ADD_USB_CMD		0
 #endif
 
+#ifndef CONFIG_CAM5200
 /* POST support */
 #define CONFIG_POST		(CFG_POST_MEMORY   | \
 				 CFG_POST_CPU	   | \
 				 CFG_POST_I2C)
+#endif
 
 #ifdef CONFIG_POST
 #define CFG_CMD_POST_DIAG CFG_CMD_DIAG
@@ -177,8 +181,8 @@
 
 #define	CONFIG_TIMESTAMP		/* display image timestamps */
 
-#if (TEXT_BASE == 0xFC000000)		/* Boot low */
-#   define CFG_LOWBOOT		1
+#if (TEXT_BASE != 0xFFF00000)
+#   define CFG_LOWBOOT		1	/* Boot low */
 #endif
 
 /*
@@ -187,20 +191,42 @@
 #define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds */
 
 #define CONFIG_PREBOOT	"echo;" \
-	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+	"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
 	"echo"
 
 #undef	CONFIG_BOOTARGS
 
-#if defined (CONFIG_TQM5200_AA)
-# define CONFIG_U_BOOT_SUFFIX	"-AA\0"
-#elif defined (CONFIG_TQM5200_AB)
-# define CONFIG_U_BOOT_SUFFIX	"-AB\0"
-#elif defined (CONFIG_TQM5200_AC)
-# define CONFIG_U_BOOT_SUFFIX	"-AC\0"
+#ifdef CONFIG_STK52XX
+# if defined(CONFIG_TQM5200_B)
+#  if defined(CFG_LOWBOOT)
+#   define ENV_UPDT							\
+	"update=protect off FC000000 FC07FFFF;"				\
+		"erase FC000000 FC07FFFF;"				\
+		"cp.b 200000 FC000000 ${filesize};"			\
+		"protect on FC000000 FC07FFFF\0"
+#  else	/* highboot */
+#   define ENV_UPDT							\
+	"update=protect off FFF00000 FFF7FFFF;"				\
+		"erase FFF00000 FFF7FFFF;"				\
+		"cp.b 200000 FFF00000 ${filesize};"			\
+		"protect on FFF00000 FFF7FFFF\0"
+#  endif /* CFG_LOWBOOT */
+# else	/* !CONFIG_TQM5200_B */
+#  define ENV_UPDT							\
+	"update=protect off FC000000 FC05FFFF;"				\
+		"erase FC000000 FC05FFFF;"				\
+		"cp.b 200000 FC000000 ${filesize};"			\
+		"protect on FC000000 FC05FFFF\0"
+# endif /* CONFIG_TQM5200_B */
+#elif defined (CONFIG_CAM5200)
+#   define ENV_UPDT							\
+	"update=protect off FC000000 FC03FFFF;"				\
+		"erase FC000000 FC03FFFF;"				\
+		"cp.b 200000 FC000000 ${filesize};"			\
+		"protect on FC000000 FC03FFFF\0"
 #else
-# define CONFIG_U_BOOT_SUFFIX	"\0"
-#endif
+# error "Unknown Carrier Board"
+#endif	/* CONFIG_STK52XX */
 
 #define CONFIG_EXTRA_ENV_SETTINGS					\
 	"netdev=eth0\0"							\
@@ -211,18 +237,18 @@
 	"addip=setenv bootargs ${bootargs} "				\
 		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
 		":${hostname}:${netdev}:off panic=1\0"			\
-	"flash_self=run ramargs addip;"					\
+	"addcons=setenv bootargs ${bootargs} "				\
+		"console=ttyS0,${baudrate}\0"				\
+	"flash_self=run ramargs addip addcons;"				\
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
-	"flash_nfs=run nfsargs addip;"					\
+	"flash_nfs=run nfsargs addip addcons;"				\
 		"bootm ${kernel_addr}\0"				\
-	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
+	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addcons;"	\
+		"bootm\0"						\
 	"bootfile=/tftpboot/tqm5200/uImage\0"				\
+	"u-boot=/tftpboot/tqm5200/u-boot.bin\0"				\
 	"load=tftp 200000 ${u-boot}\0"					\
-	"u-boot=/tftpboot/tqm5200/u-boot.bin"	CONFIG_U_BOOT_SUFFIX	\
-	"update=protect off FC000000 FC05FFFF;"				\
-		"erase FC000000 FC05FFFF;"				\
-		"cp.b 200000 FC000000 ${filesize};"			\
-		"protect on FC000000 FC05FFFF\0"			\
+	ENV_UPDT							\
 	""
 
 #define CONFIG_BOOTCOMMAND	"run net_nfs"
@@ -284,13 +310,6 @@
 #endif
 
 /* List of I2C addresses to be verified by POST */
-#if defined (CONFIG_TQM5200_AA) || defined (CONFIG_TQM5200_AB)
-#define I2C_ADDR_LIST	{	CFG_I2C_EEPROM_ADDR,	\
-				CFG_I2C_SLAVE }
-#elif defined (CONFIG_TQM5200_AC)
-#define I2C_ADDR_LIST	{	CFG_I2C_SLAVE }
-#endif
-
 #if defined (CONFIG_MINIFAP)
 #undef I2C_ADDR_LIST
 #define I2C_ADDR_LIST	{	CFG_I2C_EEPROM_ADDR,	\
@@ -301,45 +320,80 @@
 /*
  * Flash configuration
  */
-#define CFG_FLASH_BASE		TEXT_BASE /* 0xFC000000 */
+#define CFG_FLASH_BASE		0xFC000000
 
-/* use CFI flash driver if no module variant is spezified */
+/* use CFI flash driver */
 #define CFG_FLASH_CFI		1	/* Flash is CFI conformant */
 #define CFG_FLASH_CFI_DRIVER	1	/* Use the common driver */
 #define CFG_FLASH_BANKS_LIST	{ CFG_BOOTCS_START }
 #define CFG_FLASH_EMPTY_INFO
 #define CFG_FLASH_SIZE		0x04000000 /* 64 MByte */
 #define CFG_MAX_FLASH_SECT	512	/* max num of sects on one chip */
-#undef CFG_FLASH_USE_BUFFER_WRITE	/* not supported yet for AMD */
+#define CFG_FLASH_USE_BUFFER_WRITE	1
+
+#if defined (CONFIG_CAM5200)
+# define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x00040000)
+#elif defined(CONFIG_TQM5200_B)
+# define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x00080000)
+#else
+# define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x00060000)
+#endif
 
-#if !defined(CFG_LOWBOOT)
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x00760000 + 0x00800000)
-#else	/* CFG_LOWBOOT */
-#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x00060000)
-#endif	/* CFG_LOWBOOT */
 #define CFG_MAX_FLASH_BANKS	1	/* max num of flash banks
 					   (= chip selects) */
-#define CFG_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)	*/
-#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)	*/
 
 /* Dynamic MTD partition support */
 #define CONFIG_JFFS2_CMDLINE
 #define MTDIDS_DEFAULT		"nor0=TQM5200-0"
-#define MTDPARTS_DEFAULT	"mtdparts=TQM5200-0:640k(firmware),"	\
+
+#ifdef CONFIG_STK52XX
+# if defined(CONFIG_TQM5200_B)
+#  if defined(CFG_LOWBOOT)
+#   define MTDPARTS_DEFAULT	"mtdparts=TQM5200-0:1m(firmware),"	\
+						"1536k(kernel),"	\
+						"3584k(small-fs),"	\
+						"2m(initrd),"		\
+						"8m(misc),"		\
+						"16m(big-fs)"
+#  else	/* highboot */
+#   define MTDPARTS_DEFAULT	"mtdparts=TQM5200-0:2560k(kernel),"	\
+						"3584k(small-fs),"	\
+						"2m(initrd),"		\
+						"8m(misc),"		\
+						"15m(big-fs),"		\
+						"1m(firmware)"
+#  endif /* CFG_LOWBOOT */
+# else	/* !CONFIG_TQM5200_B */
+#   define MTDPARTS_DEFAULT	"mtdparts=TQM5200-0:640k(firmware),"	\
 						"1408k(kernel),"	\
 						"2m(initrd),"		\
 						"4m(small-fs),"		\
-						"16m(big-fs),"		\
-						"8m(misc)"
+						"8m(misc),"		\
+						"16m(big-fs)"
+# endif /* CONFIG_TQM5200_B */
+#elif defined (CONFIG_CAM5200)
+#   define MTDPARTS_DEFAULT	"mtdparts=TQM5200-0:768k(firmware),"	\
+						"1792k(kernel),"	\
+						"3584k(small-fs),"	\
+						"2m(initrd),"		\
+						"8m(misc),"		\
+						"16m(big-fs)"
+#else
+# error "Unknown Carrier Board"
+#endif	/* CONFIG_STK52XX */
 
 /*
  * Environment settings
  */
 #define CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_SIZE		0x10000
+#define CFG_ENV_SIZE		0x4000	/* 16 k - keep small for fast booting */
+#if defined(CONFIG_TQM5200_B)
+#define CFG_ENV_SECT_SIZE	0x40000
+#else
 #define CFG_ENV_SECT_SIZE	0x20000
+#endif /* CONFIG_TQM5200_B */
 #define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
-#define	CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
 
 /*
  * Memory map
@@ -367,8 +421,15 @@
 #   define CFG_RAMBOOT		1
 #endif
 
-#define CFG_MONITOR_LEN		(384 << 10)	/* Reserve 384 kB for Monitor	*/
-#define CFG_MALLOC_LEN		(256 << 10)	/* Reserve 256 kB for malloc()	*/
+#if defined (CONFIG_CAM5200)
+# define CFG_MONITOR_LEN	(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#elif defined(CONFIG_TQM5200_B)
+# define CFG_MONITOR_LEN	(512 << 10)	/* Reserve 512 kB for Monitor	*/
+#else
+# define CFG_MONITOR_LEN	(384 << 10)	/* Reserve 384 kB for Monitor	*/
+#endif
+
+#define CFG_MALLOC_LEN		(1024 << 10)	/* Reserve 1024 kB for malloc()	*/
 #define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
 
 /*
@@ -429,6 +490,8 @@
 #if defined (CONFIG_STK52XX) && !defined (CONFIG_STK52XX_REV100)
 # define CONFIG_RTC_M41T11 1
 # define CFG_I2C_RTC_ADDR 0x68
+# define CFG_M41T11_BASE_YEAR	1900    /* because Linux uses the same base
+					   year */
 #else
 # define CONFIG_RTC_MPC5200	1	/* use internal MPC5200 RTC */
 #endif
@@ -438,6 +501,10 @@
  */
 #define CFG_LONGHELP			/* undef to save memory	    */
 #define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
+
+#define	CFG_HUSH_PARSER		1	/* use "hush" command parser	*/
+#define	CFG_PROMPT_HUSH_PS2	"> "
+
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
 #define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
 #else
@@ -484,37 +551,25 @@
 #define CFG_CS0_START		CFG_FLASH_BASE
 #define CFG_CS0_SIZE		CFG_FLASH_SIZE
 
-/* automatic configuration of chip selects */
-#ifdef CONFIG_CS_AUTOCONF
 #define CONFIG_LAST_STAGE_INIT
-#endif
 
 /*
  * SRAM - Do not map below 2 GB in address space, because this area is used
  * for SDRAM autosizing.
  */
-#if defined CONFIG_TQM5200_AB || defined (CONFIG_CS_AUTOCONF)
 #define CFG_CS2_START		0xE5000000
-#ifdef CONFIG_TQM5200_AB
-#define CFG_CS2_SIZE		0x80000		/* 512 kByte */
-#else  /* CONFIG_CS_AUTOCONF */
 #define CFG_CS2_SIZE		0x100000	/* 1 MByte */
-#endif
 #define CFG_CS2_CFG		0x0004D930
-#endif
 
 /*
  * Grafic controller - Do not map below 2 GB in address space, because this
  * area is used for SDRAM autosizing.
  */
-#if defined (CONFIG_TQM5200_AB) || defined (CONFIG_TQM5200_AC) || \
-    defined (CONFIG_CS_AUTOCONF)
 #define SM501_FB_BASE		0xE0000000
 #define CFG_CS1_START		(SM501_FB_BASE)
 #define CFG_CS1_SIZE		0x4000000	/* 64 MByte */
 #define CFG_CS1_CFG		0x8F48FF70
 #define SM501_MMIO_BASE		CFG_CS1_START + 0x03E00000
-#endif
 
 #define CFG_CS_BURST		0x00000000
 #define CFG_CS_DEADCYCLE	0x33333311	/* 1 dead cycle for flash and SM501 */
diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h
index 18197f234d..780f27433e 100644
--- a/include/configs/TQM85xx.h
+++ b/include/configs/TQM85xx.h
@@ -158,7 +158,7 @@
 #undef  CONFIG_CONS_NONE        /* define if console on something else */
 #define CONFIG_CONS_INDEX       1  /* which serial channel for console */
 
-#else
+#else	/* ! TQM8560 */
 
 #define CONFIG_CONS_INDEX     1
 #undef	CONFIG_SERIAL_SOFTWARE_FIFO
@@ -170,6 +170,15 @@
 #define CFG_NS16550_COM1	(CFG_CCSRBAR+0x4500)
 #define CFG_NS16550_COM2	(CFG_CCSRBAR+0x4600)
 
+/* PS/2 Keyboard */
+#if !defined(CONFIG_TQM8560)
+#define CONFIG_PS2KBD			/* AT-PS/2 Keyboard		*/
+#define CONFIG_PS2MULT			/* .. on PS/2 Multiplexer	*/
+#define CONFIG_PS2SERIAL	2	/* .. on DUART2			*/
+#define CONFIG_PS2MULT_DELAY	(CFG_HZ/2)	/* Initial delay	*/
+#define CONFIG_BOARD_EARLY_INIT_R	1
+#endif /* !CONFIG_TQM8560 */
+
 #endif /* CONFIG_TQM8560 */
 
 #define CONFIG_BAUDRATE         115200
diff --git a/include/configs/TQM885D.h b/include/configs/TQM885D.h
new file mode 100644
index 0000000000..ede4e3b9b3
--- /dev/null
+++ b/include/configs/TQM885D.h
@@ -0,0 +1,492 @@
+/*
+ * (C) Copyright 2000-2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2006
+ * Martin Krause, TQ-Systems GmBH, martin.krause@tqs.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MPC885		1	/* This is a MPC885 CPU		*/
+#define CONFIG_TQM885D		1	/* ...on a TQM88D module	*/
+
+#define CONFIG_8xx_OSCLK		10000000	/*  10 MHz - PLL input clock	*/
+#define CFG_8xx_CPUCLK_MIN		15000000	/*  15 MHz - CPU minimum clock	*/
+#define CFG_8xx_CPUCLK_MAX		133000000	/* 133 MHz - CPU maximum clock	*/
+#define CONFIG_8xx_CPUCLK_DEFAULT	66000000	/*  50 MHz - CPU default clock	*/
+						/* (it will be used if there is no	*/
+						/* 'cpuclk' variable with valid value)	*/
+
+#define CFG_MEASURE_CPUCLK			/* Measure real cpu clock	*/
+						/* (function measure_gclk()	*/
+						/* will be called)		*/
+#ifdef CFG_MEASURE_CPUCLK
+#define CFG_8XX_XIN		10000000	/* measure_gclk() needs this	*/
+#endif
+
+#define CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/
+
+#define CONFIG_BAUDRATE		115200	/* console baudrate = 115kbps	*/
+
+#define CONFIG_BOOTCOUNT_LIMIT
+
+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
+
+#define CONFIG_BOARD_TYPES	1	/* support board types		*/
+
+#define CONFIG_PREBOOT	"echo;" \
+	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+	"echo"
+
+#undef	CONFIG_BOOTARGS
+
+#define CONFIG_EXTRA_ENV_SETTINGS					\
+	"netdev=eth0\0"							\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=${serverip}:${rootpath}\0"			\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"addip=setenv bootargs ${bootargs} "				\
+		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
+		":${hostname}:${netdev}:off panic=1\0"			\
+	"flash_nfs=run nfsargs addip;"					\
+		"bootm ${kernel_addr}\0"				\
+	"flash_self=run ramargs addip;"					\
+		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
+	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
+	"rootpath=/opt/eldk/ppc_8xx\0"					\
+	"bootfile=/tftpboot/TQM866M/uImage\0"				\
+	"kernel_addr=40080000\0"					\
+	"ramdisk_addr=40180000\0"					\
+	""
+#define CONFIG_BOOTCOMMAND	"run flash_self"
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
+#undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+
+#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
+
+#define CONFIG_STATUS_LED	1	/* Status LED enabled		*/
+
+#undef	CONFIG_CAN_DRIVER		/* CAN Driver support disabled	*/
+
+/* enable I2C and select the hardware/software driver */
+#undef	CONFIG_HARD_I2C			/* I2C with hardware support	*/
+#define CONFIG_SOFT_I2C		1	/* I2C bit-banged		*/
+
+#define CFG_I2C_SPEED		93000	/* 93 kHz is supposed to work	*/
+#define CFG_I2C_SLAVE		0xFE
+
+#ifdef CONFIG_SOFT_I2C
+/*
+ * Software (bit-bang) I2C driver configuration
+ */
+#define PB_SCL		0x00000020	/* PB 26 */
+#define PB_SDA		0x00000010	/* PB 27 */
+
+#define I2C_INIT	(immr->im_cpm.cp_pbdir |=  PB_SCL)
+#define I2C_ACTIVE	(immr->im_cpm.cp_pbdir |=  PB_SDA)
+#define I2C_TRISTATE	(immr->im_cpm.cp_pbdir &= ~PB_SDA)
+#define I2C_READ	((immr->im_cpm.cp_pbdat & PB_SDA) != 0)
+#define I2C_SDA(bit)	if(bit) immr->im_cpm.cp_pbdat |=  PB_SDA; \
+			else	immr->im_cpm.cp_pbdat &= ~PB_SDA
+#define I2C_SCL(bit)	if(bit) immr->im_cpm.cp_pbdat |=  PB_SCL; \
+			else	immr->im_cpm.cp_pbdat &= ~PB_SCL
+#define I2C_DELAY	udelay(2)	/* 1/4 I2C clock duration */
+#endif	/* CONFIG_SOFT_I2C */
+
+#define CFG_I2C_EEPROM_ADDR	0x50		/* EEPROM AT24C??	*/
+#define CFG_I2C_EEPROM_ADDR_LEN 2		/* two byte address	*/
+#define CFG_EEPROM_PAGE_WRITE_BITS	4
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10	/* and takes up to 10 msec */
+
+# define CONFIG_RTC_DS1337 1
+# define CFG_I2C_RTC_ADDR 0x68
+
+#define CONFIG_BOOTP_MASK	(CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+
+#define CONFIG_MAC_PARTITION
+#define CONFIG_DOS_PARTITION
+
+#undef CONFIG_RTC_MPC8xx		/* MPC866 does not support RTC	*/
+
+#define	CONFIG_TIMESTAMP		/* but print image timestmps	*/
+
+#define CONFIG_COMMANDS	      ( CONFIG_CMD_DFL	| \
+				CFG_CMD_ASKENV	| \
+				CFG_CMD_DATE	| \
+				CFG_CMD_DHCP	| \
+				CFG_CMD_EEPROM	| \
+				CFG_CMD_I2C	| \
+				CFG_CMD_IDE	| \
+				CFG_CMD_MII	| \
+				CFG_CMD_NFS	| \
+				CFG_CMD_PING )
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP			/* undef to save memory		*/
+#define CFG_PROMPT		"=> "	/* Monitor Command Prompt	*/
+
+#if 0
+#define CFG_HUSH_PARSER		1	/* use "hush" command parser	*/
+#endif
+#ifdef	CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2	"> "
+#endif
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE		1024	/* Console I/O Buffer Size	*/
+#else
+#define CFG_CBSIZE		256	/* Console I/O Buffer Size	*/
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS		16	/* max number of command args	*/
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+
+#define CFG_MEMTEST_START	0x0100000	/* memtest works on	*/
+#define CFG_MEMTEST_END		0x0300000	/* 1 ... 3 MB in DRAM	*/
+#define CFG_ALT_MEMTEST				/* alternate, more extensive
+						   memory test.*/
+
+#define CFG_LOAD_ADDR		0x100000	/* default load address */
+
+#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+/*
+ * Enable loopw commando. This has only effect, if CFG_CMD_MEM is defined,
+ * which is normally part of the default commands (CFV_CMD_DFL)
+ */
+#define CONFIG_LOOPW
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+/*-----------------------------------------------------------------------
+ * Internal Memory Mapped Register
+ */
+#define CFG_IMMR		0xFFF00000
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CFG_INIT_RAM_ADDR	CFG_IMMR
+#define CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE		0x00000000
+#define CFG_FLASH_BASE		0x40000000
+#define CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
+#define CFG_MONITOR_BASE	CFG_FLASH_BASE
+#define CFG_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
+#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
+
+#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+
+#define CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_OFFSET		0x40000 /*   Offset   of Environment Sector	*/
+#define CFG_ENV_SIZE		0x08000 /* Total Size of Environment Sector	*/
+#define CFG_ENV_SECT_SIZE	0x20000 /* Total Size of Environment Sector	*/
+
+/* Address and size of Redundant Environment Sector	*/
+#define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+
+/*-----------------------------------------------------------------------
+ * Hardware Information Block
+ */
+#define CFG_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
+#define CFG_HWINFO_SIZE		0x00000040	/* size	  of HW Info block */
+#define CFG_HWINFO_MAGIC	0x54514D38	/* 'TQM8' */
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+#endif
+
+/*-----------------------------------------------------------------------
+ * SYPCR - System Protection Control				11-9
+ * SYPCR can only be written once after reset!
+ *-----------------------------------------------------------------------
+ * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
+ */
+#if defined(CONFIG_WATCHDOG)
+#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
+#else
+#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#endif
+
+/*-----------------------------------------------------------------------
+ * SIUMCR - SIU Module Configuration				11-6
+ *-----------------------------------------------------------------------
+ * PCMCIA config., multi-function pin tri-state
+ */
+#ifndef CONFIG_CAN_DRIVER
+#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#else	/* we must activate GPL5 in the SIUMCR for CAN */
+#define CFG_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#endif	/* CONFIG_CAN_DRIVER */
+
+/*-----------------------------------------------------------------------
+ * TBSCR - Time Base Status and Control				11-26
+ *-----------------------------------------------------------------------
+ * Clear Reference Interrupt Status, Timebase freezing enabled
+ */
+#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+
+/*-----------------------------------------------------------------------
+ * PISCR - Periodic Interrupt Status and Control		11-31
+ *-----------------------------------------------------------------------
+ * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
+ */
+#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+
+/*-----------------------------------------------------------------------
+ * SCCR - System Clock and reset Control Register		15-27
+ *-----------------------------------------------------------------------
+ * Set clock output, timebase and RTC source and divider,
+ * power management and some other internal clocks
+ */
+#define SCCR_MASK	SCCR_EBDF11
+#define CFG_SCCR	(SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
+			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
+			 SCCR_DFALCD00)
+
+/*-----------------------------------------------------------------------
+ * PCMCIA stuff
+ *-----------------------------------------------------------------------
+ *
+ */
+#define CFG_PCMCIA_MEM_ADDR	(0xE0000000)
+#define CFG_PCMCIA_MEM_SIZE	( 64 << 20 )
+#define CFG_PCMCIA_DMA_ADDR	(0xE4000000)
+#define CFG_PCMCIA_DMA_SIZE	( 64 << 20 )
+#define CFG_PCMCIA_ATTRB_ADDR	(0xE8000000)
+#define CFG_PCMCIA_ATTRB_SIZE	( 64 << 20 )
+#define CFG_PCMCIA_IO_ADDR	(0xEC000000)
+#define CFG_PCMCIA_IO_SIZE	( 64 << 20 )
+
+/*-----------------------------------------------------------------------
+ * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
+ *-----------------------------------------------------------------------
+ */
+
+#define CONFIG_IDE_8xx_PCCARD	1	/* Use IDE with PC Card Adapter */
+
+#undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE	 not supported	*/
+#undef	CONFIG_IDE_LED			/* LED	 for ide not supported	*/
+#undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
+
+#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
+
+#define CFG_ATA_IDE0_OFFSET	0x0000
+
+#define CFG_ATA_BASE_ADDR	CFG_PCMCIA_MEM_ADDR
+
+/* Offset for data I/O			*/
+#define CFG_ATA_DATA_OFFSET	(CFG_PCMCIA_MEM_SIZE + 0x320)
+
+/* Offset for normal register accesses	*/
+#define CFG_ATA_REG_OFFSET	(2 * CFG_PCMCIA_MEM_SIZE + 0x320)
+
+/* Offset for alternate registers	*/
+#define CFG_ATA_ALT_OFFSET	0x0100
+
+/*-----------------------------------------------------------------------
+ *
+ *-----------------------------------------------------------------------
+ *
+ */
+#define CFG_DER 0
+
+/*
+ * Init Memory Controller:
+ *
+ * BR0/1 and OR0/1 (FLASH)
+ */
+
+#define FLASH_BASE0_PRELIM	0x40000000	/* FLASH bank #0	*/
+#define FLASH_BASE1_PRELIM	0x60000000	/* FLASH bank #0	*/
+
+/* used to re-map FLASH both when starting from SRAM or FLASH:
+ * restrict access enough to keep SRAM working (if any)
+ * but not too much to meddle with FLASH accesses
+ */
+#define CFG_REMAP_OR_AM		0x80000000	/* OR addr mask */
+#define CFG_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
+
+/*
+ * FLASH timing: Default value of OR0 after reset
+ */
+#define CFG_OR_TIMING_FLASH	(OR_CSNT_SAM | OR_ACS_MSK | OR_BI | \
+				 OR_SCY_6_CLK | OR_TRLX)
+
+#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
+#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
+#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
+
+#define CFG_OR1_REMAP	CFG_OR0_REMAP
+#define CFG_OR1_PRELIM	CFG_OR0_PRELIM
+#define CFG_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
+
+/*
+ * BR2/3 and OR2/3 (SDRAM)
+ *
+ */
+#define SDRAM_BASE2_PRELIM	0x00000000	/* SDRAM bank #0	*/
+#define SDRAM_BASE3_PRELIM	0x20000000	/* SDRAM bank #1	*/
+#define SDRAM_MAX_SIZE		(256 << 20)	/* max 256 MB per bank	*/
+
+/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
+#define CFG_OR_TIMING_SDRAM	0x00000A00
+
+#define CFG_OR2_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM )
+#define CFG_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+
+#ifndef CONFIG_CAN_DRIVER
+#define CFG_OR3_PRELIM	CFG_OR2_PRELIM
+#define CFG_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#else	/* CAN uses CS3#, so we can have only one SDRAM bank anyway */
+#define CFG_CAN_BASE		0xC0000000	/* CAN mapped at 0xC0000000	*/
+#define CFG_CAN_OR_AM		0xFFFF8000	/* 32 kB address mask		*/
+#define CFG_OR3_CAN		(CFG_CAN_OR_AM | OR_G5LA | OR_BI)
+#define CFG_BR3_CAN		((CFG_CAN_BASE & BR_BA_MSK) | \
+					BR_PS_8 | BR_MS_UPMB | BR_V )
+#endif	/* CONFIG_CAN_DRIVER */
+
+/*
+ * 4096	Rows from SDRAM example configuration
+ * 1000	factor s -> ms
+ * 64	PTP (pre-divider from MPTPR) from SDRAM example configuration
+ * 4	Number of refresh cycles per period
+ * 64	Refresh cycle in ms per number of rows
+ */
+#define CFG_PTA_PER_CLK	((4096 * 64 * 1000) / (4 * 64))
+
+/*
+ * Memory Periodic Timer Prescaler
+ * Periodic timer for refresh, start with refresh rate for 40 MHz clock
+ * (CFG_8xx_CPUCLK_MIN / CFG_PTA_PER_CLK)
+ */
+#define CFG_MAMR_PTA		39
+
+/*
+ * For 16 MBit, refresh rates could be 31.3 us
+ * (= 64 ms / 2K = 125 / quad bursts).
+ * For a simpler initialization, 15.6 us is used instead.
+ *
+ * #define CFG_MPTPR_2BK_2K	MPTPR_PTP_DIV32		for 2 banks
+ * #define CFG_MPTPR_1BK_2K	MPTPR_PTP_DIV64		for 1 bank
+ */
+#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
+#define CFG_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
+
+/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
+#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
+#define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
+
+/*
+ * MAMR settings for SDRAM
+ */
+
+/* 8 column SDRAM */
+#define CFG_MAMR_8COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
+			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
+/* 9 column SDRAM */
+#define CFG_MAMR_9COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
+			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
+/* 10 column SDRAM */
+#define CFG_MAMR_10COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
+			 MAMR_AMA_TYPE_2 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A9  |	\
+			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
+#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
+
+/*
+ * Network configuration
+ */
+#define CONFIG_SCC2_ENET		/* enable ethernet on SCC2 */
+#define CONFIG_FEC_ENET			/* enable ethernet on FEC */
+#define CONFIG_ETHER_ON_FEC1		/* ... for FEC1 */
+#define CONFIG_ETHER_ON_FEC2		/* ... for FEC2 */
+
+#if (CONFIG_COMMANDS & CFG_CMD_MII)
+#define CFG_DISCOVER_PHY
+#endif
+
+#define CONFIG_NET_RETRY_COUNT 1	/* reduce max. timeout before
+					   switching to another netwok (if the
+					   tried network is unreachable) */
+
+#define CONFIG_ETHPRIME		"SCC ETHERNET"
+
+#endif	/* __CONFIG_H */
diff --git a/include/configs/aev.h b/include/configs/aev.h
index aa6bc91b20..8d9f0a1661 100644
--- a/include/configs/aev.h
+++ b/include/configs/aev.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2003-2005
+ * (C) Copyright 2003-2006
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * (C) Copyright 2004-2005
@@ -370,10 +370,7 @@
 #define CFG_CS0_START		CFG_FLASH_BASE
 #define CFG_CS0_SIZE		CFG_FLASH_SIZE
 
-/* automatic configuration of chip selects */
-#ifdef CONFIG_CS_AUTOCONF
 #define CONFIG_LAST_STAGE_INIT
-#endif
 
 /*
  * SRAM - Do not map below 2 GB in address space, because this area is used
diff --git a/include/configs/bamboo.h b/include/configs/bamboo.h
index 6d3282150d..2c1c31927c 100644
--- a/include/configs/bamboo.h
+++ b/include/configs/bamboo.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2005
+ * (C) Copyright 2005-2006
  * Stefan Roese, DENX Software Engineering, sr@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -49,7 +49,7 @@
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  *----------------------------------------------------------------------*/
-#define CFG_MONITOR_LEN		(512 * 1024)	/* Reserve 512 kB for Monitor	*/
+#define CFG_MONITOR_LEN		(384 * 1024)	/* Reserve 384 kB for Monitor	*/
 #define CFG_MALLOC_LEN		(256 * 1024)	/* Reserve 256 kB for malloc()	*/
 #define CFG_MONITOR_BASE	(-CFG_MONITOR_LEN)
 #define CFG_SDRAM_BASE	        0x00000000	    /* _must_ be 0	*/
@@ -257,8 +257,8 @@
 	"kernel_addr=fff00000\0"					\
 	"ramdisk_addr=fff10000\0"					\
 	"load=tftp 100000 /tftpboot/bamboo/u-boot.bin\0"		\
-	"update=protect off fff80000 ffffffff;era fff80000 ffffffff;"	\
-		"cp.b 100000 fff80000 80000;"			        \
+	"update=protect off fffa0000 ffffffff;era fffa0000 ffffffff;"	\
+		"cp.b 100000 fffa0000 60000;"			        \
 		"setenv filesize;saveenv\0"				\
 	"upd=run load;run update\0"					\
 	""
@@ -358,6 +358,14 @@
 
 #define CFG_HZ		        1000	/* decrementer freq: 1 ms ticks */
 
+#define CONFIG_CMDLINE_EDITING
+
+#ifdef CONFIG_CMDLINE_EDITING
+#undef CONFIG_AUTO_COMPLETE
+#else
+#define CONFIG_AUTO_COMPLETE
+#endif
+
 /*-----------------------------------------------------------------------
  * PCI stuff
  *-----------------------------------------------------------------------
diff --git a/include/configs/cmc_pu2.h b/include/configs/cmc_pu2.h
index 46280f7e32..572a70f120 100644
--- a/include/configs/cmc_pu2.h
+++ b/include/configs/cmc_pu2.h
@@ -108,7 +108,7 @@
 /* still about 20 kB free with this defined */
 #define CFG_LONGHELP
 
-#define CONFIG_BOOTDELAY      3
+#define CONFIG_BOOTDELAY      1
 
 #ifdef CONFIG_HARD_I2C
 #define CONFIG_COMMANDS		\
@@ -206,15 +206,6 @@ struct bd_info_ext {
 #error CONFIG_USE_IRQ not supported
 #endif
 
-#define CFG_DEVICE_NULLDEV	 1	/* enble null device		*/
-#define CONFIG_SILENT_CONSOLE	 1	/* enable silent startup	*/
-
-#define CONFIG_AUTOBOOT_KEYED
-#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n"
-#define CONFIG_AUTOBOOT_STOP_STR "R"	/* default password */
-
-#define CONFIG_VERSION_VARIABLE	1       /* include version env variable */
-
 #define	CONFIG_EXTRA_ENV_SETTINGS	\
 	"net_nfs=tftp ${loadaddr} ${bootfile};run nfsargs addip addcons " \
 		"addmtd;bootm\0" \
diff --git a/include/configs/gth2.h b/include/configs/gth2.h
new file mode 100644
index 0000000000..a49ed3bae3
--- /dev/null
+++ b/include/configs/gth2.h
@@ -0,0 +1,195 @@
+/*
+ * (C) Copyright 2005
+ * Thomas.Lange@corelatus.se
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * This file contains the configuration parameters for the gth2 board.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_MIPS32		1  /* MIPS32 CPU core	*/
+#define CONFIG_GTH2		1
+#define CONFIG_AU1X00		1  /* alchemy series cpu */
+
+#define CONFIG_AU1000		1
+
+#define CONFIG_MISC_INIT_R	1
+
+#define CONFIG_ETHADDR		DE:AD:BE:EF:01:02    /* Ethernet address */
+
+#define CONFIG_BOOTDELAY	1	/* autoboot after 1 seconds	*/
+
+#define CONFIG_ENV_OVERWRITE 1 /* Allow change of ethernet address */
+
+#define CONFIG_BOOT_RETRY_TIME 5 /* Retry boot in 5 secs */
+
+#define CONFIG_RESET_TO_RETRY 1 /* If timeout waiting for command, perform a reset */
+
+#define CONFIG_BAUDRATE		115200
+
+/* valid baudrates */
+#define CFG_BAUDRATE_TABLE	{ 115200 }
+
+/* Only interrupt boot if space is pressed */
+/* If a long serial cable is connected but */
+/* other end is dead, garbage will be read */
+#define CONFIG_AUTOBOOT_KEYED 1
+#define CONFIG_AUTOBOOT_PROMPT "Press space to abort autoboot in %d second\n"
+#define CONFIG_AUTOBOOT_DELAY_STR "d"
+#define CONFIG_AUTOBOOT_STOP_STR " "
+
+#define CONFIG_TIMESTAMP		/* Print image info with timestamp */
+#define CONFIG_BOOTARGS "panic=1"
+
+#define CONFIG_EXTRA_ENV_SETTINGS					\
+	"addmisc=setenv bootargs $(bootargs) "				\
+		"ethaddr=$(ethaddr) \0"					\
+	"netboot=bootp;run addmisc;bootm\0"				\
+		""
+
+/* Boot from Compact flash partition 2 as default */
+#define CONFIG_BOOTCOMMAND	"ide reset;disk 0x81000000 0:2;run addmisc;bootm"
+
+#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_IDE | CFG_CMD_DHCP ) & \
+ ~(CFG_CMD_ENV | CFG_CMD_FAT | CFG_CMD_FLASH | CFG_CMD_FPGA | \
+   CFG_CMD_MII | CFG_CMD_LOADS	| CFG_CMD_LOADB | CFG_CMD_ELF | \
+   CFG_CMD_BDI | CFG_CMD_BEDBUG | CFG_CMD_NFS | CFG_CMD_AUTOSCRIPT ))
+
+#include <cmd_confdefs.h>
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP				/* undef to save memory	     */
+#define CFG_PROMPT		"GTH2 # "	/* Monitor Command Prompt    */
+#define CFG_CBSIZE		256		/* Console I/O Buffer Size   */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)  /* Print Buffer Size */
+#define CFG_MAXARGS		16		/* max number of command args*/
+
+#define CFG_MALLOC_LEN		128*1024
+
+#define CFG_BOOTPARAMS_LEN	128*1024
+
+#define CFG_MHZ			500
+
+#define CFG_HZ			(CFG_MHZ * 1000000) /* FIXME causes overflow in net.c */
+
+#define CFG_SDRAM_BASE		0x80000000     /* Cached addr */
+
+#define CFG_LOAD_ADDR		0x81000000     /* default load address	*/
+
+#define CFG_MEMTEST_START	0x80100000
+#define CFG_MEMTEST_END		0x83000000
+
+#define CONFIG_HW_WATCHDOG	1
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+#define CFG_MAX_FLASH_BANKS	2	/* max number of memory banks */
+#define CFG_MAX_FLASH_SECT	(128)	/* max number of sectors on one chip */
+
+#define PHYS_FLASH		0xbfc00000 /* Flash Bank #1 */
+
+/* The following #defines are needed to get flash environment right */
+#define CFG_MONITOR_BASE	TEXT_BASE
+#define CFG_MONITOR_LEN		(192 << 10)
+
+#define CFG_INIT_SP_OFFSET	0x400000
+
+/* We boot from this flash, selected with dip switch */
+#define CFG_FLASH_BASE		PHYS_FLASH
+
+/* timeout values are in ticks */
+#define CFG_FLASH_ERASE_TOUT	(2 * CFG_HZ) /* Timeout for Flash Erase */
+#define CFG_FLASH_WRITE_TOUT	(2 * CFG_HZ) /* Timeout for Flash Write */
+
+#define CFG_ENV_IS_NOWHERE	1
+
+/* Address and size of Primary Environment Sector	*/
+#define CFG_ENV_ADDR		0xB0030000
+#define CFG_ENV_SIZE		0x10000
+
+#define CONFIG_FLASH_16BIT
+
+#define CONFIG_NR_DRAM_BANKS	2
+
+#define CONFIG_NET_MULTI
+
+#define CONFIG_MEMSIZE_IN_BYTES
+
+/*---ATA PCMCIA ------------------------------------*/
+#define CFG_PCMCIA_MEM_SIZE 0x4000000 /* Offset to slot 1 FIXME!!! */
+
+#define CFG_PCMCIA_MEM_ADDR  0x20000000
+#define CFG_PCMCIA_IO_BASE   0x28000000
+#define CFG_PCMCIA_ATTR_BASE 0x30000000
+
+#define CONFIG_PCMCIA_SLOT_A
+
+#define CONFIG_ATAPI 1
+#define CONFIG_MAC_PARTITION 1
+
+/* We run CF in "true ide" mode or a harddrive via pcmcia */
+#define CONFIG_IDE_PCMCIA 1
+
+/* We only support one slot for now */
+#define CFG_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CFG_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
+
+#undef	CONFIG_IDE_LED			/* LED	 for ide not supported	*/
+#undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
+
+#define CFG_ATA_IDE0_OFFSET	0
+
+#define CFG_ATA_BASE_ADDR	CFG_PCMCIA_IO_BASE
+
+/* Offset for data I/O			*/
+#define CFG_ATA_DATA_OFFSET	0
+
+/* Offset for normal register accesses	*/
+#define CFG_ATA_REG_OFFSET	0
+
+/* Offset for alternate registers	*/
+#define CFG_ATA_ALT_OFFSET	0x0200
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_DCACHE_SIZE		16384
+#define CFG_ICACHE_SIZE		16384
+#define CFG_CACHELINE_SIZE	32
+
+#define GPIO_CACONFIG  (1<<0)
+#define GPIO_DPACONFIG (1<<6)
+#define GPIO_ERESET    (1<<11)
+#define GPIO_EEDQ      (1<<17)
+#define GPIO_WDI       (1<<18)
+#define GPIO_RJ1LY     (1<<22)
+#define GPIO_RJ1LG     (1<<23)
+#define GPIO_LEDCLK    (1<<29)
+#define GPIO_LEDD      (1<<30)
+#define GPIO_CPU_LED   (1<<31)
+
+#endif	/* __CONFIG_H */
diff --git a/include/configs/kvme080.h b/include/configs/kvme080.h
new file mode 100644
index 0000000000..61cf70576d
--- /dev/null
+++ b/include/configs/kvme080.h
@@ -0,0 +1,262 @@
+/*
+ * (C) Copyright 2005
+ * Sangmoon Kim, dogoil@etinsys.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_MPC824X		1
+#define CONFIG_MPC8245		1
+#define CONFIG_KVME080		1
+
+#define CONFIG_CONS_INDEX	1
+
+#define CONFIG_BAUDRATE		115200
+
+#define CONFIG_BOOTDELAY	5
+
+#define CONFIG_IPADDR		192.168.0.2
+#define CONFIG_NETMASK		255.255.255.0
+#define CONFIG_SERVERIP		192.168.0.1
+
+#define CONFIG_BOOTARGS \
+	"console=ttyS0,115200 " \
+	"root=/dev/nfs rw nfsroot=192.168.0.1:/opt/eldk/ppc_82xx " \
+	"ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:" \
+	"kvme080:eth0:none " \
+	"mtdparts=phys_mapped_flash:12m(root),-(kernel)"
+
+#define CONFIG_BOOTCOMMAND \
+	"tftp 800000 kvme080/uImage; " \
+	"bootm 800000"
+
+#define CONFIG_LOADADDR		800000
+
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_EARLY_INIT_R
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_LOADS_ECHO	1
+#undef	CFG_LOADS_BAUD_CHANGE
+
+#undef	CONFIG_WATCHDOG
+
+#define CONFIG_BOOTP_MASK	(CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+
+#define CONFIG_MAC_PARTITION
+#define CONFIG_DOS_PARTITION
+
+#define CONFIG_RTC_DS164x
+
+#define CONFIG_COMMANDS		( CONFIG_CMD_DFL	| \
+				  CFG_CMD_ASKENV	| \
+				  CFG_CMD_CACHE		| \
+				  CFG_CMD_DATE		| \
+				  CFG_CMD_DHCP		| \
+				  CFG_CMD_DIAG		| \
+				  CFG_CMD_EEPROM	| \
+				  CFG_CMD_ELF		| \
+				  CFG_CMD_I2C		| \
+				  CFG_CMD_JFFS2		| \
+				  CFG_CMD_NFS		| \
+				  CFG_CMD_PCI		| \
+				  CFG_CMD_PING		| \
+				  CFG_CMD_SDRAM		| \
+				  CFG_CMD_SNTP)
+
+#define CONFIG_NETCONSOLE
+
+#include <cmd_confdefs.h>
+
+#define CFG_LONGHELP
+#define CFG_PROMPT		"=> "
+#define CFG_CBSIZE		256
+#define CFG_PBSIZE		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16)
+#define CFG_MAXARGS		16
+#define CFG_BARGSIZE		CFG_CBSIZE
+
+#define CFG_MEMTEST_START	0x00400000
+#define CFG_MEMTEST_END		0x07C00000
+
+#define CFG_LOAD_ADDR		0x00100000
+#define CFG_HZ			1000
+
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+#define CFG_INIT_RAM_ADDR	0x40000000
+#define CFG_INIT_RAM_END	0x1000
+#define CFG_GBL_DATA_SIZE	128
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+
+#define CFG_SDRAM_BASE		0x00000000
+#define CFG_FLASH_BASE		0x7C000000
+#define CFG_EUMB_ADDR		0xFC000000
+#define CFG_NVRAM_BASE_ADDR	0xFF000000
+#define CFG_NS16550_COM1	0xFF080000
+#define CFG_NS16550_COM2	0xFF080010
+#define CFG_NS16550_COM3	0xFF080020
+#define CFG_NS16550_COM4	0xFF080030
+#define CFG_RESET_ADDRESS	0xFFF00100
+
+#define CFG_MAX_RAM_SIZE	0x20000000
+#define CFG_FLASH_SIZE		(16 * 1024 * 1024)
+#define CFG_NVRAM_SIZE		0x7FFF8
+
+#define CONFIG_VERY_BIG_RAM
+
+#define CFG_MONITOR_LEN		0x00040000
+#define CFG_MONITOR_BASE	TEXT_BASE
+#define CFG_MALLOC_LEN		(512 << 10)
+
+#define CFG_BOOTMAPSZ		(8 << 20)
+
+#define CFG_FLASH_CFI
+#define CFG_FLASH_CFI_DRIVER
+#define CFG_FLASH_USE_BUFFER_WRITE
+#define CFG_FLASH_PROTECTION
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_FLASH_PROTECT_CLEAR
+
+#define CFG_MAX_FLASH_BANKS	1
+#define CFG_MAX_FLASH_SECT	256
+
+#define CFG_FLASH_ERASE_TOUT	120000
+#define CFG_FLASH_WRITE_TOUT	500
+
+#define CFG_JFFS2_FIRST_BANK	0
+#define CFG_JFFS2_NUM_BANKS	1
+
+#define CFG_ENV_IS_IN_NVRAM	1
+#define CONFIG_ENV_OVERWRITE	1
+#define CFG_NVRAM_ACCESS_ROUTINE
+#define CFG_ENV_ADDR		CFG_NVRAM_BASE_ADDR
+#define CFG_ENV_SIZE		0x400
+#define CFG_ENV_OFFSET		0
+
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE	1
+#define CFG_NS16550_CLK		14745600
+
+#define CONFIG_PCI
+#define CONFIG_PCI_PNP
+
+#define CONFIG_NET_MULTI
+#define CONFIG_EEPRO100
+#define CONFIG_EEPRO100_SROM_WRITE
+
+#define CFG_RX_ETH_BUFFER	8
+
+#define CONFIG_HARD_I2C		1
+#define CFG_I2C_SPEED		400000
+#define CFG_I2C_SLAVE		0x7F
+
+#define CFG_I2C_EEPROM_ADDR		0x57
+#define CFG_I2C_EEPROM_ADDR_LEN		1
+#define CFG_EEPROM_PAGE_WRITE_BITS	3
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10
+
+#define CONFIG_SYS_CLK_FREQ	33333333
+
+#define CFG_CACHELINE_SIZE	32
+#if CONFIG_COMMANDS & CFG_CMD_KGDB
+#  define CFG_CACHELINE_SHIFT	5
+#endif
+
+#define CFG_DLL_EXTEND		0x00
+#define CFG_PCI_HOLD_DEL	0x20
+
+#define CFG_ROMNAL		15
+#define CFG_ROMFAL		31
+
+#define CFG_REFINT		430
+
+#define CFG_DBUS_SIZE2		1
+
+#define CFG_BSTOPRE		121
+#define CFG_REFREC		8
+#define CFG_RDLAT		4
+#define CFG_PRETOACT		3
+#define CFG_ACTTOPRE		5
+#define CFG_ACTORW		3
+#define CFG_SDMODE_CAS_LAT	3
+#define CFG_SDMODE_WRAP		0
+
+#define CFG_REGISTERD_TYPE_BUFFER	1
+#define CFG_EXTROM			1
+#define CFG_REGDIMM			0
+
+#define CFG_BANK0_START		0x00000000
+#define CFG_BANK0_END		(0x4000000 - 1)
+#define CFG_BANK0_ENABLE	1
+#define CFG_BANK1_START		0x04000000
+#define CFG_BANK1_END		(0x8000000 - 1)
+#define CFG_BANK1_ENABLE	1
+#define CFG_BANK2_START		0x3ff00000
+#define CFG_BANK2_END		0x3fffffff
+#define CFG_BANK2_ENABLE	0
+#define CFG_BANK3_START		0x3ff00000
+#define CFG_BANK3_END		0x3fffffff
+#define CFG_BANK3_ENABLE	0
+#define CFG_BANK4_START		0x00000000
+#define CFG_BANK4_END		0x00000000
+#define CFG_BANK4_ENABLE	0
+#define CFG_BANK5_START		0x00000000
+#define CFG_BANK5_END		0x00000000
+#define CFG_BANK5_ENABLE	0
+#define CFG_BANK6_START		0x00000000
+#define CFG_BANK6_END		0x00000000
+#define CFG_BANK6_ENABLE	0
+#define CFG_BANK7_START		0x00000000
+#define CFG_BANK7_END		0x00000000
+#define CFG_BANK7_ENABLE	0
+
+#define CFG_BANK_ENABLE		0x03
+
+#define CFG_ODCR		0x75
+#define CFG_PGMAX		0x32
+
+#define CFG_IBAT0L	(CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT0U	(CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CFG_IBAT1L	(CFG_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT1U	(CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+
+#define CFG_IBAT2L	(0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CFG_IBAT2U	(0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CFG_IBAT3L	(0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CFG_IBAT3U	(0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CFG_DBAT0L	CFG_IBAT0L
+#define CFG_DBAT0U	CFG_IBAT0U
+#define CFG_DBAT1L	CFG_IBAT1L
+#define CFG_DBAT1U	CFG_IBAT1U
+#define CFG_DBAT2L	CFG_IBAT2L
+#define CFG_DBAT2U	CFG_IBAT2U
+#define CFG_DBAT3L	CFG_IBAT3L
+#define CFG_DBAT3U	CFG_IBAT3U
+
+#define BOOTFLAG_COLD	0x01
+#define BOOTFLAG_WARM	0x02
+
+#endif	/* __CONFIG_H */
diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h
index d8d63a112c..ce33b85c96 100644
--- a/include/configs/mcc200.h
+++ b/include/configs/mcc200.h
@@ -47,8 +47,22 @@
 
 /*
  * Serial console configuration
+ *
+ *  To select console on the one of 8 external UARTs,
+ * define CONFIG_QUART_CONSOLE as 1, 2, 3, or 4 for the first Quad UART,
+ * or as 5, 6, 7, or 8 for the second Quad UART.
+ *
+ *  CONFIG_PSC_CONSOLE must be undefined in this case.
+ */
+/* #define CONFIG_QUART_CONSOLE	1	*/ /* console is on UART1 of QUART1	*/
+/*
+ *  To select console on PSC1, define CONFIG_PSC_CONSOLE as 1
+ * and undefine CONFIG_QUART_CONSOLE.
  */
 #define CONFIG_PSC_CONSOLE	1	/* console is on PSC1			*/
+#if defined(CONFIG_QUART_CONSOLE) && defined(CONFIG_PSC_CONSOLE)
+#error "Select only one console device!"
+#endif
 #define CONFIG_BAUDRATE		115200
 #define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
@@ -256,11 +270,59 @@
 #define CFG_CS2_SIZE		0x00001000
 #define CFG_CS2_CFG		0x1d300
 
+/* Second Quad UART @0x80010000 */
+#define CFG_CS1_START		0x80010000
+#define CFG_CS1_SIZE		0x00001000
+#define CFG_CS1_CFG		0x1d300
+
+/*
+ *  Select one of quarts as a default
+ * console. If undefined - PSC console
+ * wil be default
+ */
 #define CFG_CS_BURST		0x00000000
 #define CFG_CS_DEADCYCLE	0x33333333
 
 #define CFG_RESET_ADDRESS	0xff000000
 
+/*
+ * QUART Expanders support
+ */
+#if defined(CONFIG_QUART_CONSOLE)
+/*
+ * We'll use NS16550 chip routines,
+ */
+#define CFG_NS16550		1
+#define CFG_NS16550_SERIAL	1
+#define CONFIG_CONS_INDEX	1
+/*
+ *  To achieve necessary offset on SC16C554
+ * A0-A2 (register select) pins with NS16550
+ * functions (in struct NS16550), REG_SIZE
+ * should be 4, because A0-A2 pins are connected
+ * to DA2-DA4 address bus lines.
+ */
+#define CFG_NS16550_REG_SIZE	4
+/*
+ * LocalPlus Bus already inited in cpu_init_f(),
+ * so can work with QUART's chip selects.
+ * One of four SC16C554 UARTs is selected with
+ * A3-A4 (DA5-DA6) lines.
+ */
+#if (CONFIG_QUART_CONSOLE > 0) && (CONFIG_QUART_CONSOLE < 5)
+#define CFG_NS16550_COM1	(CFG_CS2_START | (CONFIG_QUART_CONSOLE - 1)<<5)
+#elif (CONFIG_QUART_CONSOLE > 4) && (CONFIG_QUART_CONSOLE < 9)
+#define CFG_NS16550_COM1	(CFG_CS1_START | (CONFIG_QUART_CONSOLE - 5)<<5)
+#elif
+#error "Wrong QUART expander number."
+#endif
+
+/*
+ * SC16C554 chip's external crystal oscillator frequency
+ * is 7.3728 MHz
+ */
+#define CFG_NS16550_CLK		7372800
+#endif /* CONFIG_QUART_CONSOLE */
 /*-----------------------------------------------------------------------
  * USB stuff
  *-----------------------------------------------------------------------
diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h
index 64bbca301e..50c1c4fd4c 100644
--- a/include/configs/pcs440ep.h
+++ b/include/configs/pcs440ep.h
@@ -116,18 +116,17 @@
  *----------------------------------------------------------------------*/
 #define CONFIG_SPD_EEPROM               /* Use SPD EEPROM for setup             */
 #undef CONFIG_DDR_ECC			/* don't use ECC			*/
-#define SPD_EEPROM_ADDRESS      {0x50, 0x51}
+#define SPD_EEPROM_ADDRESS      {0x50}
 
 /*-----------------------------------------------------------------------
  * I2C
  *----------------------------------------------------------------------*/
 #define CONFIG_HARD_I2C		1	    /* I2C with hardware support	*/
 #undef	CONFIG_SOFT_I2C			    /* I2C bit-banged		*/
-#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CFG_I2C_SPEED		100000	/* I2C speed and slave address	*/
 #define CFG_I2C_SLAVE		0x7F
 
-#define CFG_I2C_MULTI_EEPROMS
-#define CFG_I2C_EEPROM_ADDR	(0xa8>>1)
+#define CFG_I2C_EEPROM_ADDR	(0xa4>>1)
 #define CFG_I2C_EEPROM_ADDR_LEN 1
 #define CFG_EEPROM_PAGE_WRITE_ENABLE
 #define CFG_EEPROM_PAGE_WRITE_BITS 3
@@ -211,6 +210,7 @@
 				CFG_CMD_ASKENV	| \
 				CFG_CMD_DHCP	| \
 				CFG_CMD_DIAG	| \
+				CFG_CMD_EEPROM	| \
 				CFG_CMD_ELF	| \
 				CFG_CMD_I2C	| \
 				CFG_CMD_IRQ	| \
diff --git a/include/configs/ppmc7xx.h b/include/configs/ppmc7xx.h
new file mode 100644
index 0000000000..072b9dd5b4
--- /dev/null
+++ b/include/configs/ppmc7xx.h
@@ -0,0 +1,419 @@
+/*
+ * ppmc7xx.h
+ * ---------
+ *
+ * Wind River PPMC 7xx/74xx board configuration file.
+ *
+ * By Richard Danter (richard.danter@windriver.com)
+ * Copyright (C) 2005 Wind River Systems
+ */
+
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_PPMC7XX
+
+
+/*===================================================================
+ *
+ * User configurable settings - Modify to your preference
+ *
+ *===================================================================
+ */
+
+/*
+ * Debug
+ *
+ * DEBUG			- Define this is you want extra debug info
+ * GTREGREAD			- Required to build with debug
+ * do_bdinfo			- Required to build with debug
+ */
+
+#undef	DEBUG
+#define	GTREGREAD(x)			0xFFFFFFFF
+#define	do_bdinfo(a,b,c,d)
+
+
+/*
+ * CPU type
+ *
+ * CONFIG_7xx			- We have a 750 or 755 CPU
+ * CONFIG_74xx			- We have a 7400 CPU
+ * CONFIG_ALTIVEC		- We have altivec enabled CPU (only 7400)
+ * CONFIG_BUS_CLK		- System bus clock in Hz
+ */
+
+#define	CONFIG_7xx
+#undef	CONFIG_74xx
+#undef	CONFIG_ALTIVEC
+#define CONFIG_BUS_CLK			66000000
+
+
+/*
+ * Monitor configuration
+ *
+ * CONFIG_COMMANDS		- List of command sets to include in shell
+ *
+ * The following command sets have been tested and known to work:
+ *
+ * CFG_CMD_CACHE		- Cache control commands
+ * CFG_CMD_MEMORY		- Memory display, change and test commands
+ * CFG_CMD_FLASH		- Erase and program flash
+ * CFG_CMD_ENV			- Environment commands
+ * CFG_CMD_RUN			- Run commands stored in env vars
+ * CFG_CMD_ELF			- Load ELF files
+ * CFG_CMD_NET			- Networking/file download commands
+ * CFG_CMD_PING			- ICMP Echo Request command
+ * CFG_CMD_PCI			- PCI Bus scanning command
+ */
+
+#define CONFIG_COMMANDS		( (CFG_CMD_DFL & ~(CFG_CMD_KGDB)) |	\
+						   CFG_CMD_FLASH |	\
+						   CFG_CMD_ENV |	\
+						   CFG_CMD_RUN |	\
+						   CFG_CMD_ELF |	\
+						   CFG_CMD_NET |	\
+						   CFG_CMD_PING |	\
+						   CFG_CMD_PCI)
+
+
+/*
+ * Serial configuration
+ *
+ * CONFIG_CONS_INDEX		- Serial console port number (COM1)
+ * CONFIG_BAUDRATE			- Serial speed
+ */
+
+#define CONFIG_CONS_INDEX		1
+#define CONFIG_BAUDRATE			9600
+
+
+/*
+ * PCI config
+ *
+ * CONFIG_PCI				- Enable PCI bus
+ * CONFIG_PCI_PNP			- Enable Plug & Play support
+ * CONFIG_PCI_SCAN_SHOW		- Enable display of devices at startup
+ */
+
+#define	CONFIG_PCI
+#define	CONFIG_PCI_PNP
+#undef	CONFIG_PCI_SCAN_SHOW
+
+
+/*
+ * Network config
+ *
+ * CONFIG_NET_MULTI			- Support for multiple network interfaces
+ * CONFIG_EEPRO100			- Intel 8255x Ethernet Controller
+ * CONFIG_EEPRO100_SROM_WRITE - Enable writing to network card ROM
+ */
+
+#define	CONFIG_NET_MULTI
+#define	CONFIG_EEPRO100
+#define	CONFIG_EEPRO100_SROM_WRITE
+
+
+/*
+ * Enable extra init functions
+ *
+ * CONFIG_MISC_INIT_F		- Call pre-relocation init functions
+ * CONFIG_MISC_INIT_R		- Call post relocation init functions
+ */
+
+#undef	CONFIG_MISC_INIT_F
+#define CONFIG_MISC_INIT_R
+
+
+/*
+ * Boot config
+ *
+ * CONFIG_BOOTCOMMAND		- Command(s) to execute to auto-boot
+ * CONFIG_BOOTDELAY			- How long to wait before auto-boot (in sec)
+ */
+
+#define CONFIG_BOOTCOMMAND		\
+	"bootp;" \
+	"setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \
+	"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off;" \
+	"bootm"
+#define CONFIG_BOOTDELAY		5
+
+
+/*===================================================================
+ *
+ * Board configuration settings - You should not need to modify these
+ *
+ *===================================================================
+ */
+
+
+#include <cmd_confdefs.h>
+
+
+/*
+ * Memory map
+ *
+ * This board runs in a standard CHRP (Map-B) configuration.
+ *
+ *	Type		Start		End			Size	Width	Chip Sel
+ *	----------- ----------- ----------- ------- ------- --------
+ *	SDRAM		0x00000000	0x04000000	64MB	64b		SDRAMCS0
+ *	User LED's	0x78000000						RCS3
+ *	UART		0x7C000000						RCS2
+ *	Mailbox		0xFF000000						RCS1
+ *	Flash		0xFFC00000	0xFFFFFFFF	4MB	64b		RCS0
+ *
+ * Flash sectors are laid out as follows.
+ *
+ *	Sector	Start		End			Size	Comments
+ *	------- ----------- ----------- ------- -----------
+ *	 0		0xFFC00000	0xFFC3FFFF	256KB
+ *   1		0xFFC40000	0xFFC7FFFF	256KB
+ *	 2		0xFFC80000	0xFFCBFFFF	256KB
+ *	 3		0xFFCC0000	0xFFCFFFFF	256KB
+ *	 4		0xFFD00000	0xFFD3FFFF	256KB
+ *	 5		0xFFD40000	0xFFD7FFFF	256KB
+ *	 6		0xFFD80000	0xFFDBFFFF	256KB
+ *	 7		0xFFDC0000	0xFFDFFFFF	256KB
+ *   8		0xFFE00000	0xFFE3FFFF	256KB
+ *	 9		0xFFE40000	0xFFE7FFFF	256KB
+ *  10		0xFFE80000	0xFFEBFFFF	256KB
+ *  11		0xFFEC0000	0xFFEFFFFF	256KB
+ *  12		0xFFF00000	0xFFF3FFFF	256KB	U-Boot code here
+ *  13		0xFFF40000	0xFFF7FFFF	256KB
+ *  14		0xFFF80000	0xFFFBFFFF	256KB
+ *  15		0xFFFC0000	0xFFFDFFFF	128KB
+ *  16		0xFFFE0000	0xFFFE7FFF	 32KB	U-Boot env vars here
+ *  17		0xFFFE8000	0xFFFEFFFF	 32KB	U-Boot backup copy of env vars here
+ *  18		0xFFFF0000	0xFFFFFFFF	 64KB
+ */
+
+
+/*
+ * SDRAM config - see memory map details above.
+ *
+ * CFG_SDRAM_BASE			- Start address of SDRAM, this _must_ be zero!
+ * CFG_SDRAM_SIZE			- Total size of contiguous SDRAM bank(s)
+ */
+
+#define CFG_SDRAM_BASE			0x00000000
+#define CFG_SDRAM_SIZE			0x04000000
+
+
+/*
+ * Flash config - see memory map details above.
+ *
+ * CFG_FLASH_BASE			- Start address of flash memory
+ * CFG_FLASH_SIZE			- Total size of contiguous flash mem
+ * CFG_FLASH_ERASE_TOUT		- Erase timeout in ms
+ * CFG_FLASH_WRITE_TOUT		- Write timeout in ms
+ * CFG_MAX_FLASH_BANKS		- Number of banks of flash on board
+ * CFG_MAX_FLASH_SECT		- Number of sectors in a bank
+ */
+
+#define CFG_FLASH_BASE			0xFFC00000
+#define CFG_FLASH_SIZE			0x00400000
+#define CFG_FLASH_ERASE_TOUT	250000
+#define CFG_FLASH_WRITE_TOUT	5000
+#define CFG_MAX_FLASH_BANKS		1
+#define CFG_MAX_FLASH_SECT		19
+
+
+/*
+ * Monitor config - see memory map details above
+ *
+ * CFG_MONITOR_BASE			- Base address of monitor code
+ * CFG_MALLOC_LEN			- Size of malloc pool (128KB)
+ */
+
+#define CFG_MONITOR_BASE		TEXT_BASE
+#define CFG_MALLOC_LEN			0x20000
+
+
+/*
+ * Command shell settings
+ *
+ * CFG_BARGSIZE			- Boot Argument buffer size
+ * CFG_BOOTMAPSZ		- Size of app's mapped RAM at boot (Linux=8MB)
+ * CFG_CBSIZE			- Console Buffer (input) size
+ * CFG_LOAD_ADDR		- Default load address
+ * CFG_LONGHELP			- Provide more detailed help
+ * CFG_MAXARGS			- Number of args accepted by monitor commands
+ * CFG_MEMTEST_START		- Start address of test to run on RAM
+ * CFG_MEMTEST_END		- End address of RAM test
+ * CFG_PBSIZE			- Print Buffer (output) size
+ * CFG_PROMPT			- Prompt string
+ */
+
+#define CFG_BARGSIZE			1024
+#define CFG_BOOTMAPSZ			0x800000
+#define CFG_CBSIZE			1024
+#define CFG_LOAD_ADDR			0x100000
+#define CFG_LONGHELP
+#define CFG_MAXARGS			16
+#define CFG_MEMTEST_START		0x00040000
+#define CFG_MEMTEST_END			0x00040100
+#define CFG_PBSIZE			1024
+#define CFG_PROMPT			"=> "
+
+
+/*
+ * Environment config - see memory map details above
+ *
+ * CFG_ENV_IS_IN_FLASH		- The env variables are stored in flash
+ * CFG_ENV_ADDR			- Address of the sector containing env vars
+ * CFG_ENV_SIZE			- Ammount of RAM for env vars (used to save RAM, 4KB)
+ * CFG_ENV_SECT_SIZE		- Size of sector containing env vars (32KB)
+ */
+
+#define CFG_ENV_IS_IN_FLASH		1
+#define CFG_ENV_ADDR			0xFFFE0000
+#define CFG_ENV_SIZE			0x1000
+#define CFG_ENV_ADDR_REDUND		0xFFFE8000
+#define CFG_ENV_SIZE_REDUND		0x1000
+#define CFG_ENV_SECT_SIZE		0x8000
+
+
+/*
+ * Initial RAM config
+ *
+ * Since the main system RAM is initialised very early, we place the INIT_RAM
+ * in the main system RAM just above the exception vectors. The contents are
+ * copied to top of RAM by the init code.
+ *
+ * CFG_INIT_RAM_ADDR		- Address of Init RAM, above exception vect
+ * CFG_INIT_RAM_END			- Size of Init RAM
+ * CFG_GBL_DATA_SIZE		- Ammount of RAM to reserve for global data
+ * CFG_GBL_DATA_OFFSET		- Start of global data, top of stack
+ */
+
+#define CFG_INIT_RAM_ADDR		(CFG_SDRAM_BASE + 0x4000)
+#define CFG_INIT_RAM_END		0x4000
+#define CFG_GBL_DATA_SIZE		128
+#define CFG_GBL_DATA_OFFSET		(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+
+
+/*
+ * Initial BAT config
+ *
+ * BAT0	- System SDRAM
+ * BAT1 - LED's and Serial Port
+ * BAT2 - PCI Memory
+ * BAT3 - PCI I/O including Flash Memory
+ */
+
+#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_64M | BATU_VS | BATU_VP)
+#define CFG_DBAT0L CFG_IBAT0L
+#define CFG_DBAT0U CFG_IBAT0U
+
+#define CFG_IBAT1L (0x70000000 | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CFG_IBAT1U (0x70000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT1L (0x70000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_DBAT1U (0x70000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CFG_IBAT2L (0x80000000 | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CFG_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT2L (0x80000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_DBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CFG_IBAT3L (0xF0000000 | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CFG_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT3L (0xF0000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_DBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+
+/*
+ * Cache config
+ *
+ * CFG_CACHELINE_SIZE		- Size of a cache line (CPU specific)
+ * CFG_L2					- L2 cache enabled if defined
+ * L2_INIT					- L2 cache init flags
+ * L2_ENABLE				- L2 cache enable flags
+ */
+
+#define CFG_CACHELINE_SIZE		32
+#undef	CFG_L2
+#define L2_INIT					0
+#define L2_ENABLE				0
+
+
+/*
+ * Clocks config
+ *
+ * CFG_BUS_HZ				- Bus clock frequency in Hz
+ * CFG_BUS_CLK				- As above (?)
+ * CFG_HZ					- Decrementer freq in Hz
+ */
+
+#define CFG_BUS_HZ				CONFIG_BUS_CLK
+#define CFG_BUS_CLK				CONFIG_BUS_CLK
+#define CFG_HZ					1000
+
+
+/*
+ * Serial port config
+ *
+ * CFG_BAUDRATE_TABLE		- List of valid baud rates
+ * CFG_NS16550				- Include the NS16550 driver
+ * CFG_NS16550_SERIAL		- Include the serial (wrapper) driver
+ * CFG_NS16550_CLK			- Frequency of reference clock
+ * CFG_NS16550_REG_SIZE		- 64-bit accesses to 8-bit port
+ * CFG_NS16550_COM1			- Base address of 1st serial port
+ */
+
+#define CFG_BAUDRATE_TABLE		{ 9600, 19200, 38400, 57600, 115200 }
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_CLK			3686400
+#define CFG_NS16550_REG_SIZE	-8
+#define CFG_NS16550_COM1		0x7C000000
+
+
+/*
+ * PCI Config - Address Map B (CHRP)
+ */
+
+#define CFG_PCI_MEMORY_BUS      0x00000000
+#define CFG_PCI_MEMORY_PHYS     0x00000000
+#define CFG_PCI_MEMORY_SIZE     0x40000000
+#define CFG_PCI_MEM_BUS         0x80000000
+#define CFG_PCI_MEM_PHYS        0x80000000
+#define CFG_PCI_MEM_SIZE        0x7D000000
+#define CFG_ISA_MEM_BUS         0x00000000
+#define CFG_ISA_MEM_PHYS        0xFD000000
+#define CFG_ISA_MEM_SIZE        0x01000000
+#define CFG_PCI_IO_BUS          0x00800000
+#define CFG_PCI_IO_PHYS         0xFE800000
+#define CFG_PCI_IO_SIZE         0x00400000
+#define CFG_ISA_IO_BUS          0x00000000
+#define CFG_ISA_IO_PHYS         0xFE000000
+#define CFG_ISA_IO_SIZE         0x00800000
+#define CFG_ISA_IO_BASE_ADDRESS CFG_ISA_IO_PHYS
+#define CFG_ISA_IO              CFG_ISA_IO_PHYS
+#define CFG_60X_PCI_IO_OFFSET   CFG_ISA_IO_PHYS
+
+
+/*
+ * Extra init functions
+ *
+ * CFG_BOARD_ASM_INIT		- Call assembly init code
+ */
+
+#define CFG_BOARD_ASM_INIT
+
+
+/*
+ * Boot flags
+ *
+ * BOOTFLAG_COLD			- Indicates a power-on boot
+ * BOOTFLAG_WARM			- Indicates a software reset
+ */
+
+#define BOOTFLAG_COLD			0x01
+#define BOOTFLAG_WARM			0x02
+
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/sbc2410x.h b/include/configs/sbc2410x.h
new file mode 100644
index 0000000000..866f7b0426
--- /dev/null
+++ b/include/configs/sbc2410x.h
@@ -0,0 +1,239 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ * Gary Jennejohn <gj@denx.de>
+ * David Mueller <d.mueller@elsoft.ch>
+ *
+ * Modified for the friendly-arm SBC-2410X by
+ * (C) Copyright 2005
+ * JinHua Luo, GuangDong Linux Center, <luo.jinhua@gd-linux.com>
+ *
+ * Configuation settings for the friendly-arm SBC-2410X board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * If we are developing, we might want to start armboot from ram
+ * so we MUST NOT initialize critical regs like mem-timing ...
+ */
+#undef CONFIG_SKIP_LOWLEVEL_INIT	/* undef for developing */
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_ARM920T		1	/* This is an ARM920T Core	*/
+#define	CONFIG_S3C2410		1	/* in a SAMSUNG S3C2410 SoC     */
+#define CONFIG_SBC2410X		1	/* on a friendly-arm SBC-2410X Board  */
+
+/* input clock of PLL */
+#define CONFIG_SYS_CLK_FREQ	12000000/* the SBC2410X has 12MHz input clock */
+
+
+#define USE_920T_MMU		1
+#undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff */
+
+/*
+ * Size of malloc() pool
+ */
+#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128*1024)
+#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_DRIVER_CS8900	1	/* we have a CS8900 on-board */
+#define CS8900_BASE		0x19000300
+#define CS8900_BUS16		1 /* the Linux driver does accesses as shorts */
+
+/*
+ * select serial console configuration
+ */
+#define CONFIG_SERIAL1          1	/* we use SERIAL 1 on SBC2410X */
+
+/************************************************************
+ * RTC
+ ************************************************************/
+#define	CONFIG_RTC_S3C24X0	1
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_BAUDRATE		115200
+
+/***********************************************************
+ * Command definition
+ ***********************************************************/
+#define CONFIG_COMMANDS \
+			(CONFIG_CMD_DFL	 | \
+			CFG_CMD_CACHE	 | \
+			/*CFG_CMD_NAND	 |*/ \
+			/*CFG_CMD_EEPROM |*/ \
+			/*CFG_CMD_I2C	 |*/ \
+			/*CFG_CMD_USB	 |*/ \
+			CFG_CMD_REGINFO  | \
+			CFG_CMD_DATE	 | \
+			CFG_CMD_PING     | \
+			CFG_CMD_DHCP     | \
+			CFG_CMD_ELF)
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#define CONFIG_BOOTDELAY	3
+#define CONFIG_BOOTARGS    	"console=ttySAC0 root=/dev/nfs nfsroot=192.168.0.1:/friendly-arm/rootfs_netserv ip=192.168.0.69:192.168.0.1:192.168.0.1:255.255.255.0:debian:eth0:off"
+#define CONFIG_ETHADDR	        08:00:3e:26:0a:5b
+#define CONFIG_NETMASK          255.255.255.0
+#define CONFIG_IPADDR		192.168.0.69
+#define CONFIG_SERVERIP		192.168.0.1
+/*#define CONFIG_BOOTFILE	"elinos-lart" */
+#define CONFIG_BOOTCOMMAND	"dhcp; bootm"
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	115200		/* speed to run kgdb serial port */
+/* what's this ? it's not used anywhere */
+#define CONFIG_KGDB_SER_INDEX	1		/* which serial port to use */
+#endif
+
+/*
+ * Miscellaneous configurable options
+ */
+#define	CFG_LONGHELP				/* undef to save memory		*/
+#define	CFG_PROMPT		"[ ~ljh@GDLC ]# "	/* Monitor Command Prompt	*/
+#define	CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define	CFG_MAXARGS		16		/* max number of command args	*/
+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+
+#define CFG_MEMTEST_START	0x30000000	/* memtest works on	*/
+#define CFG_MEMTEST_END		0x33F00000	/* 63 MB in DRAM	*/
+
+#undef  CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+
+#define	CFG_LOAD_ADDR		0x33000000	/* default load address	*/
+
+/* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */
+/* it to wrap 100 times (total 1562500) to get 1 sec. */
+#define	CFG_HZ			1562500
+
+/* valid baudrates */
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ	(4*1024)	/* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ	(4*1024)	/* FIQ stack */
+#endif
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS	1	   /* we have 1 bank of DRAM */
+#define PHYS_SDRAM_1		0x30000000 /* SDRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE	0x04000000 /* 64 MB */
+
+#define PHYS_FLASH_1		0x00000000 /* Flash Bank #1 */
+
+#define CFG_FLASH_BASE		PHYS_FLASH_1
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+/* #define CONFIG_AMD_LV400	1	/\* uncomment this if you have a LV400 flash *\/ */
+
+#define CONFIG_AMD_LV800	1	/* uncomment this if you have a LV800 flash */
+
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks */
+
+#ifdef CONFIG_AMD_LV800
+#define PHYS_FLASH_SIZE		0x00100000 /* 1MB */
+#define CFG_MAX_FLASH_SECT	(19)	/* max number of sectors on one chip */
+#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x0F0000) /* addr of environment */
+#endif
+
+#ifdef CONFIG_AMD_LV400
+#define PHYS_FLASH_SIZE		0x00080000 /* 512KB */
+#define CFG_MAX_FLASH_SECT	(11)	/* max number of sectors on one chip */
+#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x070000) /* addr of environment */
+#endif
+
+/* timeout values are in ticks */
+#define CFG_FLASH_ERASE_TOUT	(5*CFG_HZ) /* Timeout for Flash Erase */
+#define CFG_FLASH_WRITE_TOUT	(5*CFG_HZ) /* Timeout for Flash Write */
+
+#define	CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_SIZE		0x10000	/* Total Size of Environment Sector */
+
+/*-----------------------------------------------------------------------
+ * NAND flash settings
+ */
+#if (CONFIG_COMMANDS & CFG_CMD_NAND)
+#define CFG_MAX_NAND_DEVICE	1	/* Max number of NAND devices		*/
+#define SECTORSIZE 512
+
+#define ADDR_COLUMN 1
+#define ADDR_PAGE 2
+#define ADDR_COLUMN_PAGE 3
+
+#define NAND_ChipID_UNKNOWN 	0x00
+#define NAND_MAX_FLOORS 1
+#define NAND_MAX_CHIPS 1
+
+#define NAND_WAIT_READY(nand)	NF_WaitRB()
+#define NAND_DISABLE_CE(nand)	NF_SetCE(NFCE_HIGH)
+#define NAND_ENABLE_CE(nand)	NF_SetCE(NFCE_LOW)
+#define WRITE_NAND_COMMAND(d, adr)	NF_Cmd(d)
+#define WRITE_NAND_COMMANDW(d, adr)	NF_CmdW(d)
+#define WRITE_NAND_ADDRESS(d, adr)	NF_Addr(d)
+#define WRITE_NAND(d, adr)		NF_Write(d)
+#define READ_NAND(adr)			NF_Read()
+/* the following functions are NOP's because S3C24X0 handles this in hardware */
+#define NAND_CTL_CLRALE(nandptr)
+#define NAND_CTL_SETALE(nandptr)
+#define NAND_CTL_CLRCLE(nandptr)
+#define NAND_CTL_SETCLE(nandptr)
+/* #undef CONFIG_MTD_NAND_VERIFY_WRITE */
+#endif	/* CONFIG_COMMANDS & CFG_CMD_NAND */
+
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define CONFIG_CMDLINE_TAG
+
+#define CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2   "> "
+
+#define CONFIG_CMDLINE_EDITING
+
+#ifdef CONFIG_CMDLINE_EDITING
+#undef CONFIG_AUTO_COMPLETE
+#else
+#define CONFIG_AUTO_COMPLETE
+#endif
+
+#endif	/* __CONFIG_H */
diff --git a/include/configs/spc1920.h b/include/configs/spc1920.h
new file mode 100644
index 0000000000..9d3609a67d
--- /dev/null
+++ b/include/configs/spc1920.h
@@ -0,0 +1,362 @@
+/*
+ * (C) Copyright 2006
+ * Markus Klotzbuecher, DENX Software Engineering, mk@denx.de
+ *
+ * Configuation settings for the SPC1920 board.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __H
+#define __CONFIG_H
+
+#define CONFIG_SPC1920			1	/* SPC1920 board */
+#define CONFIG_MPC885			1	/* MPC885 CPU */
+
+#define	CONFIG_8xx_CONS_SMC1		/* Console is on SMC1 */
+#undef	CONFIG_8xx_CONS_SMC2
+#undef	CONFIG_8xx_CONS_NONE
+
+#define CONFIG_MII
+/* #define MII_DEBUG */
+/* #define CONFIG_FEC_ENET */
+#undef CONFIG_ETHER_ON_FEC1
+#define CONFIG_ETHER_ON_FEC2
+#define FEC_ENET
+/* #define CONFIG_FEC2_PHY_NORXERR */
+/* #define CFG_DISCOVER_PHY */
+/* #define CONFIG_PHY_ADDR		0x1 */
+#define CONFIG_FEC2_PHY		1
+
+#define CONFIG_BAUDRATE		19200
+
+/* use PLD CLK4 instead of brg */
+#undef CFG_SPC1920_SMC1_CLK4
+
+#define CONFIG_8xx_OSCLK		10000000 /* 10 MHz oscillator on EXTCLK  */
+#define CONFIG_8xx_CPUCLK_DEFAULT	50000000
+#define CFG_8xx_CPUCLK_MIN		40000000
+#define CFG_8xx_CPUCLK_MAX		133000000
+
+#define CFG_RESET_ADDRESS		0xf8000000
+
+#define CONFIG_BOARD_EARLY_INIT_F
+
+
+#if 1
+#define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
+#else
+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
+#endif
+
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_NFSBOOTCOMMAND							\
+    "dhcp;"									\
+    "setenv bootargs root=/dev/nfs rw nfsroot=$rootpath "			\
+    "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:eth0:off;"		\
+    "bootm"
+
+#define CONFIG_BOOTCOMMAND							\
+    "setenv bootargs root=/dev/mtdblock2 rw mtdparts=phys:1280K(ROM)ro,-(root) "\
+    "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:eth0:off;"		\
+    "bootm fe080000"
+
+#undef CONFIG_BOOTARGS
+
+#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
+#define CONFIG_BZIP2	 /* include support for bzip2 compressed images */
+
+#ifndef CONFIG_COMMANDS
+#define CONFIG_COMMANDS	(CONFIG_CMD_DFL   \
+			 | CFG_CMD_ASKENV \
+			 | CFG_CMD_ECHO   \
+			 | CFG_CMD_IMMAP  \
+			 | CFG_CMD_JFFS2 \
+			 | CFG_CMD_PING \
+			 | CFG_CMD_DHCP \
+			 | CFG_CMD_IMMAP \
+			 | CFG_CMD_MII)
+			/* & ~( CFG_CMD_NET)) */
+
+
+#endif /* !CONFIG_COMMANDS */
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Miscellaneous configurable options
+ */
+#define	CFG_LONGHELP				/* undef to save memory		*/
+#define	CFG_PROMPT		"=>"		/* Monitor Command Prompt	*/
+#define CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2	"> "
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define	CFG_CBSIZE		1024		/* Console I/O Buffer Size	*/
+#else
+#define	CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
+#endif
+
+#define	CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) /* Print Buffer Size	*/
+#define	CFG_MAXARGS		16		/* max number of command args	*/
+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+
+#define CFG_LOAD_ADDR		0x00100000
+
+#define	CFG_HZ		        1000	/* decrementer freq: 1 ms ticks */
+
+#define CFG_BAUDRATE_TABLE	{ 2400, 4800, 9600, 19200 }
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+
+/*-----------------------------------------------------------------------
+ * Internal Memory Mapped Register
+ */
+#define CFG_IMMR		0xF0000000
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CFG_INIT_RAM_ADDR	CFG_IMMR
+#define	CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define	CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
+
+#define CFG_MONITOR_BASE	TEXT_BASE
+#define	CFG_MONITOR_LEN		(256 << 10)	/* Reserve 256 KB for monitor	*/
+
+#ifdef CONFIG_BZIP2
+#define	CFG_MALLOC_LEN		(2500 << 10)	/* Reserve ~2.5 MB for malloc()	*/
+#else
+#define	CFG_MALLOC_LEN		(384 << 10)	/* Reserve 384 kB for malloc()	*/
+#endif /* CONFIG_BZIP2 */
+
+#define	CFG_ALLOC_DPRAM		1	/* use allocation routines	*/
+
+/*
+ * Flash
+ */
+/*-----------------------------------------------------------------------
+ * Flash organisation
+ */
+#define CFG_FLASH_BASE          0xFE000000
+#define CFG_FLASH_CFI                           /* The flash is CFI compatible  */
+#define CFG_FLASH_CFI_DRIVER                    /* Use common CFI driver        */
+#define CFG_MAX_FLASH_BANKS     1               /* Max number of flash banks    */
+#define CFG_MAX_FLASH_SECT      128             /* Max num of sects on one chip */
+
+/* Environment is in flash */
+#define CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_SECT_SIZE       0x40000         /* We use one complete sector   */
+#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+
+#define CONFIG_ENV_OVERWRITE
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
+#define CFG_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
+
+/*-----------------------------------------------------------------------
+ * I2C configuration
+ */
+#if (CONFIG_COMMANDS & CFG_CMD_I2C)
+#define CONFIG_HARD_I2C		1	/* I2C with hardware support */
+#define CFG_I2C_SPEED		400000	/* I2C speed and slave address defaults */
+#define CFG_I2C_SLAVE		0x7F
+#endif
+
+/*-----------------------------------------------------------------------
+ * SYPCR - System Protection Control				11-9
+ * SYPCR can only be written once after reset!
+ *-----------------------------------------------------------------------
+ * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
+ */
+#if defined(CONFIG_WATCHDOG)
+#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
+#else
+#define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#endif
+
+/*-----------------------------------------------------------------------
+ * SIUMCR - SIU Module Configuration				11-6
+ *-----------------------------------------------------------------------
+ * PCMCIA config., multi-function pin tri-state
+ */
+#define CFG_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+
+/*-----------------------------------------------------------------------
+ * TBSCR - Time Base Status and Control				11-26
+ *-----------------------------------------------------------------------
+ * Clear Reference Interrupt Status, Timebase freezing enabled
+ */
+#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBE)
+
+/*-----------------------------------------------------------------------
+ * PISCR - Periodic Interrupt Status and Control		11-31
+ *-----------------------------------------------------------------------
+ * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
+ */
+#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+
+/*-----------------------------------------------------------------------
+ * SCCR - System Clock and reset Control Register		15-27
+ *-----------------------------------------------------------------------
+ * Set clock output, timebase and RTC source and divider,
+ * power management and some other internal clocks
+ */
+#define SCCR_MASK	SCCR_EBDF11
+/* #define CFG_SCCR	SCCR_TBS */
+#define CFG_SCCR	(SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
+			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
+			 SCCR_DFALCD00)
+
+/*-----------------------------------------------------------------------
+ * DER - Debug Enable Register
+ *-----------------------------------------------------------------------
+ * Set to zero to prevent the processor from entering debug mode
+ */
+#define CFG_DER		 0
+
+
+/* Because of the way the 860 starts up and assigns CS0 the entire
+ * address space, we have to set the memory controller differently.
+ * Normally, you write the option register first, and then enable the
+ * chip select by writing the base register.  For CS0, you must write
+ * the base register first, followed by the option register.
+ */
+
+
+/*
+ * Init Memory Controller:
+ */
+
+/* BR0 and OR0 (FLASH) */
+#define FLASH_BASE0_PRELIM	CFG_FLASH_BASE	/* FLASH bank #0 */
+
+
+/* used to re-map FLASH both when starting from SRAM or FLASH:
+ * restrict access enough to keep SRAM working (if any)
+ * but not too much to meddle with FLASH accesses
+ */
+#define CFG_REMAP_OR_AM		0x80000000	/* OR addr mask */
+#define CFG_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
+
+/*
+ * FLASH timing:
+ */
+#define CFG_OR_TIMING_FLASH	(OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
+				 OR_SCY_3_CLK | OR_EHTR | OR_BI)
+
+#define CFG_OR0_REMAP	(CFG_REMAP_OR_AM  | CFG_OR_TIMING_FLASH)
+#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
+#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
+
+
+/*
+ * SDRAM CS1 UPMB
+ */
+#define	CFG_SDRAM_BASE	0x00000000
+#define CFG_SDRAM_BASE_PRELIM CFG_SDRAM_BASE
+#define SDRAM_MAX_SIZE	0x4000000 /* max 64 MB */
+
+#define CFG_PRELIM_OR1_AM	0xF0000000
+/* #define CFG_OR1_TIMING  OR_CSNT_SAM/\*  | OR_G5LS /\\* *\\/ *\/ */
+#define SDRAM_TIMING	OR_SCY_0_CLK	/* SDRAM-Timing */
+
+#define CFG_OR1_PRELIM	(CFG_PRELIM_OR1_AM | OR_CSNT_SAM | OR_G5LS | SDRAM_TIMING)
+#define CFG_BR1_PRELIM  ((CFG_SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_V)
+
+/* #define CFG_OR1_FINAL   ((CFG_OR1_AM & OR_AM_MSK) | CFG_OR1_TIMING) */
+/* #define CFG_BR1_FINAL   ((CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMB | BR_V) */
+
+#define CFG_PTB_PER_CLK	((4096 * 16 * 1000) / (4 * 64))
+#define CFG_PTA_PER_CLK 195
+#define CFG_MBMR_PTB	195
+#define CFG_MPTPR	MPTPR_PTP_DIV16
+#define CFG_MAR		0x88
+
+#define CFG_MBMR_8COL  ((CFG_MBMR_PTB << MBMR_PTB_SHIFT) | \
+			MBMR_AMB_TYPE_0 | \
+			MBMR_G0CLB_A10 | \
+			MBMR_DSB_1_CYCL | \
+			MBMR_RLFB_1X | \
+			MBMR_WLFB_1X | \
+			MBMR_TLFB_4X) /* 0x04804114 */ /* 0x10802114 */
+
+#define CFG_MBMR_9COL  ((CFG_MBMR_PTB << MBMR_PTB_SHIFT) | \
+			MBMR_AMB_TYPE_1 | \
+			MBMR_G0CLB_A10 | \
+			MBMR_DSB_1_CYCL | \
+			MBMR_RLFB_1X | \
+			MBMR_WLFB_1X | \
+			MBMR_TLFB_4X) /* 0x04804114 */ /* 0x10802114 */
+
+
+/* PLD CS5 */
+#define CFG_SPC1920_PLD_BASE	0x80000000
+#define CFG_PRELIM_OR5_AM	0xffff8000
+
+#define CFG_OR5_PRELIM		(CFG_PRELIM_OR5_AM | \
+					OR_CSNT_SAM | \
+					OR_ACS_DIV1 | \
+					OR_BI | \
+					OR_SCY_0_CLK | \
+					OR_TRLX)
+
+#define CFG_BR5_PRELIM ((CFG_SPC1920_PLD_BASE & BR_BA_MSK) | BR_PS_8 | BR_V);
+
+/* #define CFG_PLD_BASE   0x30000000 */
+/* #define CFG_OR5_PRELIM 0xffff1110 */
+/* #define CFG_BR5_PRELIM 0x30000401 */
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define	BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
+#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
+
+/* Machine type
+*/
+#define _MACH_8xx (_MACH_fads)
+
+#endif	/* __CONFIG_H */
diff --git a/include/configs/spieval.h b/include/configs/spieval.h
index 96cb6e4c7a..f40dde2ac8 100644
--- a/include/configs/spieval.h
+++ b/include/configs/spieval.h
@@ -191,16 +191,6 @@
 
 #undef	CONFIG_BOOTARGS
 
-#if defined (CONFIG_TQM5200_AA)
-# define CONFIG_U_BOOT_SUFFIX	"-AA\0"
-#elif defined (CONFIG_TQM5200_AB)
-# define CONFIG_U_BOOT_SUFFIX	"-AB\0"
-#elif defined (CONFIG_TQM5200_AC)
-# define CONFIG_U_BOOT_SUFFIX	"-AC\0"
-#else
-# define CONFIG_U_BOOT_SUFFIX	"\0"
-#endif
-
 #define CONFIG_EXTRA_ENV_SETTINGS					\
 	"netdev=eth0\0"							\
 	"rootpath=/opt/eldk/ppc_6xx\0"					\
@@ -217,7 +207,7 @@
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
 	"bootfile=/tftpboot/tqm5200/uImage\0"				\
 	"load=tftp 200000 ${u-boot}\0"					\
-	"u-boot=/tftpboot/tqm5200/u-boot.bin"	CONFIG_U_BOOT_SUFFIX	\
+	"u-boot=/tftpboot/tqm5200/u-boot.bin\0"				\
 	"update=protect off FC000000 FC05FFFF;"				\
 		"erase FC000000 FC05FFFF;"				\
 		"cp.b 200000 FC000000 ${filesize};"			\
@@ -283,13 +273,6 @@
 #endif
 
 /* List of I2C addresses to be verified by POST */
-#if defined (CONFIG_TQM5200_AA) || defined (CONFIG_TQM5200_AB)
-#define I2C_ADDR_LIST	{	CFG_I2C_EEPROM_ADDR,	\
-				CFG_I2C_SLAVE }
-#elif defined (CONFIG_TQM5200_AC)
-#define I2C_ADDR_LIST	{	CFG_I2C_SLAVE }
-#endif
-
 #if defined (CONFIG_MINIFAP)
 #undef I2C_ADDR_LIST
 #define I2C_ADDR_LIST	{	CFG_I2C_EEPROM_ADDR,	\
@@ -469,37 +452,25 @@
 #define CFG_CS0_START		CFG_FLASH_BASE
 #define CFG_CS0_SIZE		CFG_FLASH_SIZE
 
-/* automatic configuration of chip selects */
-#ifdef CONFIG_CS_AUTOCONF
 #define CONFIG_LAST_STAGE_INIT
-#endif
 
 /*
  * SRAM - Do not map below 2 GB in address space, because this area is used
  * for SDRAM autosizing.
  */
-#if defined CONFIG_TQM5200_AB || defined (CONFIG_CS_AUTOCONF)
 #define CFG_CS2_START		0xE5000000
-#ifdef CONFIG_TQM5200_AB
-#define CFG_CS2_SIZE		0x80000		/* 512 kByte */
-#else  /* CONFIG_CS_AUTOCONF */
 #define CFG_CS2_SIZE		0x100000	/* 1 MByte */
-#endif
 #define CFG_CS2_CFG		0x0004D930
-#endif
 
 /*
  * Grafic controller - Do not map below 2 GB in address space, because this
  * area is used for SDRAM autosizing.
  */
-#if defined (CONFIG_TQM5200_AB) || defined (CONFIG_TQM5200_AC) || \
-    defined (CONFIG_CS_AUTOCONF)
 #define SM501_FB_BASE		0xE0000000
 #define CFG_CS1_START		(SM501_FB_BASE)
 #define CFG_CS1_SIZE		0x4000000	/* 64 MByte */
 #define CFG_CS1_CFG		0x8F48FF70
 #define SM501_MMIO_BASE		CFG_CS1_START + 0x03E00000
-#endif
 
 #define CFG_CS_BURST		0x00000000
 #define CFG_CS_DEADCYCLE	0x33333311	/* 1 dead cycle for flash and SM501 */
diff --git a/include/configs/trab.h b/include/configs/trab.h
index 85ee756e05..a2dc8e7bff 100644
--- a/include/configs/trab.h
+++ b/include/configs/trab.h
@@ -160,7 +160,6 @@
 				CFG_CMD_DATE			| \
 				CFG_CMD_DHCP			| \
 				CFG_CMD_FAT			| \
-				CFG_CMD_JFFS2			| \
 				CFG_CMD_NFS			| \
 				CFG_CMD_SNTP			| \
 				CFG_CMD_USB	)
@@ -174,7 +173,6 @@
 				CFG_CMD_DATE			| \
 				CFG_CMD_DHCP			| \
 				CFG_CMD_FAT			| \
-				CFG_CMD_JFFS2			| \
 				CFG_CMD_NFS			| \
 				CFG_CMD_SNTP			| \
 				CFG_CMD_USB	)
@@ -384,10 +382,10 @@
 #define MTDIDS_DEFAULT		"nor0=0"
 
 /* production flash layout */
-#define MTDPARTS_DEFAULT	"mtdparts=0:32k(Firmware1)ro,"		\
+#define MTDPARTS_DEFAULT	"mtdparts=0:16k(Firmware1)ro,"		\
 						"16k(Env1),"		\
 						"16k(Env2),"		\
-						"320k(Firmware2)ro,"	\
+						"336k(Firmware2)ro,"	\
 						"896k(Kernel),"		\
 						"5376k(Root-FS),"	\
 						"1408k(JFFS2),"		\
@@ -404,7 +402,7 @@
 #endif
 
 /* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT	(2*CFG_HZ) /* Timeout for Flash Erase */
+#define CFG_FLASH_ERASE_TOUT	(15*CFG_HZ) /* Timeout for Flash Erase */
 #define CFG_FLASH_WRITE_TOUT	(2*CFG_HZ) /* Timeout for Flash Write */
 
 #define	CFG_ENV_IS_IN_FLASH	1
diff --git a/include/configs/voiceblue.h b/include/configs/voiceblue.h
index c5ee78ff4d..4e97b01aa1 100644
--- a/include/configs/voiceblue.h
+++ b/include/configs/voiceblue.h
@@ -47,6 +47,8 @@
 #define CONFIG_SETUP_MEMORY_TAGS	1
 #define CONFIG_INITRD_TAG		1
 
+#define CONFIG_VERSION_VARIABLE	1       /* include version env variable */
+
 /*
  * Physical Memory Map
  */
@@ -94,7 +96,6 @@
 
 #define CONFIG_ENV_OVERWRITE
 
-#define CFG_JFFS_CUSTOM_PART	/* see board/voiceblue/jffs2parts.c */
 #endif
 
 /*
@@ -104,9 +105,11 @@
 #ifdef VOICEBLUE_SMALL_FLASH
 #define CFG_MALLOC_LEN		(SZ_64K - CFG_GBL_DATA_SIZE)
 #define CONFIG_STACKSIZE	SZ_8K
+#define PHYS_SDRAM_1_RESERVED	0
 #else
 #define CFG_MALLOC_LEN		SZ_4M
 #define CONFIG_STACKSIZE	SZ_1M
+#define PHYS_SDRAM_1_RESERVED	(CFG_MONITOR_LEN + CFG_MALLOC_LEN + CONFIG_STACKSIZE)
 #endif
 
 /*
@@ -174,6 +177,7 @@
 #define CONFIG_BOOTCOMMAND	"run nboot"
 #define CONFIG_PREBOOT		"run setup"
 #define	CONFIG_EXTRA_ENV_SETTINGS				\
+	"silent=1\0"						\
 	"ospart=0\0"						\
 	"swapos=no\0"						\
 	"setpart="						\
@@ -185,15 +189,37 @@
 	"fi\0"							\
 	"setup=setenv bootargs console=ttyS0,$baudrate "	\
 		"mtdparts=$mtdparts\0"				\
-	"nfsargs=run setpart; setenv bootargs $bootargs "	\
-		"root=/dev/nfs ip=dhcp\0"			\
+	"nfsargs=setenv bootargs $bootargs "			\
+		"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off " \
+		"nfsroot=$rootpath root=/dev/nfs\0"		\
 	"flashargs=run setpart; setenv bootargs $bootargs "	\
 		"root=/dev/mtdblock$partition ro "		\
 		"rootfstype=jffs2\0"				\
-	"nboot=run nfsargs; bootp; tftp; bootm\0"		\
-	"fboot=run flashargs; fsload /boot/uImage; bootm\0"
+	"initrdargs=setenv bootargs $bootargs "			\
+		"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off\0" \
+	"fboot=run flashargs; fsload /boot/uImage; bootm\0"	\
+	"iboot=bootp; run initrdargs; tftp; bootm\0"		\
+	"nboot=bootp; run nfsargs; tftp; bootm\0"
 #endif
 
+#ifndef VOICEBLUE_SMALL_FLASH
+#define CONFIG_SILENT_CONSOLE		1	/* enable silent startup */
+
+#if 1	/* feel free to disable for development */
+#define CONFIG_AUTOBOOT_KEYED		/* Enable password protection	*/
+#define CONFIG_AUTOBOOT_PROMPT	"\nVoiceBlue Enterprise - booting...\n"
+#define CONFIG_AUTOBOOT_DELAY_STR	"."	/* 1st "password"	*/
+#endif
+
+/*
+ * JFFS2 partitions (mtdparts command line support)
+ */
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=omapflash.0"
+#define MTDPARTS_DEFAULT	"mtdparts=omapflash.0:128k(uboot),64k(env),64k(r_env),16256k(data1),-(data2)"
+
+#endif	/* VOICEBLUE_SMALL_FLASH */
+
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>
 
@@ -213,7 +239,7 @@
 #define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
 
 #define CFG_MEMTEST_START	PHYS_SDRAM_1
-#define CFG_MEMTEST_END		PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE
+#define CFG_MEMTEST_END		PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE - PHYS_SDRAM_1_RESERVED
 
 #undef	CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
 
@@ -247,22 +273,4 @@
 
 #define VOICEBLUE_LED_REG	0x04030000
 
-/*
- * JFFS2 partitions
- *
- */
-/* No command line, one static partition */
-#undef CONFIG_JFFS2_CMDLINE
-#define CONFIG_JFFS2_DEV		"nor0"
-#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
-#define CONFIG_JFFS2_PART_OFFSET	0x00040000
-
-/* mtdparts command line support */
-/* Note: fake mtd_id used, no linux mtd map file */
-/*
-#define CONFIG_JFFS2_CMDLINE
-#define MTDIDS_DEFAULT		"nor0=voiceblue-0"
-#define MTDPARTS_DEFAULT	"mtdparts=voiceblue-0:128k(uboot),64k(env),64k(renv),-(jffs2)"
-*/
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/xm250.h b/include/configs/xm250.h
index 952f73b43d..825bfd14e9 100644
--- a/include/configs/xm250.h
+++ b/include/configs/xm250.h
@@ -119,9 +119,9 @@
 /*
  * Definitions related to passing arguments to kernel.
  */
-#define CONFIG_CMDLINE_TAG	     1	 /* send commandline to Kernel		*/
-#define CONFIG_SETUP_MEMORY_TAGS     1	 /* send memory definition to kernel	*/
-#undef	CONFIG_INITRD_TAG		 /* do not send initrd params		*/
+#define CONFIG_CMDLINE_TAG	 1	 /* send commandline to Kernel		*/
+#define CONFIG_SETUP_MEMORY_TAGS 1	 /* send memory definition to kernel	*/
+#define	CONFIG_INITRD_TAG	 1	 /* do not send initrd params		*/
 #undef	CONFIG_VFD			 /* do not send framebuffer setup	*/
 
 /*
diff --git a/include/configs/yucca.h b/include/configs/yucca.h
new file mode 100644
index 0000000000..0e58e7e102
--- /dev/null
+++ b/include/configs/yucca.h
@@ -0,0 +1,526 @@
+/*
+ * (C) Copyright 2004 Paul Reynolds <PaulReynolds@lhsolutions.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/************************************************************************
+ * 1 january 2005	Alain Saurel <asaurel@amcc.com>
+ * Adapted to current Das U-Boot source
+ ***********************************************************************/
+/************************************************************************
+ * yucca.h - configuration for AMCC 440SPe Ref (yucca)
+ ***********************************************************************/
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define DEBUG
+#undef DEBUG
+
+/*-----------------------------------------------------------------------
+ * High Level Configuration Options
+ *----------------------------------------------------------------------*/
+#define CONFIG_4xx			1	/* ... PPC4xx family	*/
+#define CONFIG_440			1	/* ... PPC440 family	*/
+#define CONFIG_440SPE			1	/* Specifc SPe support	*/
+#define CONFIG_BOARD_EARLY_INIT_F	1	/* Call board_pre_init	*/
+#undef	CFG_DRAM_TEST				/* Disable-takes long time */
+#define CONFIG_SYS_CLK_FREQ	33333333	/* external freq to pll	*/
+#define EXTCLK_33_33		33333333
+#define EXTCLK_66_66		66666666
+#define EXTCLK_50		50000000
+#define EXTCLK_83		83333333
+
+#define	CONFIG_IBM_EMAC4_V4		1
+#define	CONFIG_MISC_INIT_F		1	/* Use misc_init_f()	*/
+#undef  CONFIG_SHOW_BOOT_PROGRESS
+#undef  CONFIG_STRESS
+#undef  ENABLE_ECC
+/*-----------------------------------------------------------------------
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ *----------------------------------------------------------------------*/
+#define CFG_SDRAM_BASE		0x00000000	/* _must_ be 0		*/
+#define CFG_FLASH_BASE		0xfff00000	/* start of FLASH	*/
+#define CFG_MONITOR_BASE	0xfffb0000	/* start of monitor	*/
+#define CFG_PERIPHERAL_BASE	0xa0000000	/* internal peripherals	*/
+#define CFG_ISRAM_BASE		0x90000000	/* internal SRAM	*/
+
+#define CFG_PCI_MEMBASE		0x80000000	/* mapped pci memory	*/
+#define CFG_PCI_MEMBASE1	0x90000000	/* mapped pci memory	*/
+#define CFG_PCI_MEMBASE2	0xa0000000	/* mapped pci memory	*/
+#define CFG_PCI_MEMBASE3	0xb0000000	/* mapped pci memory	*/
+
+#define CFG_PCI_BASE		0xd0000000	/* internal PCI regs	*/
+#define CFG_PCI_TARGBASE	0x80000000	/*PCIaddr mapped to CFG_PCI_MEMBASE*/
+
+/* #define CFG_PCI_BASE_IO	0xB8000000 */	/* internal PCI I-O	*/
+/* #define CFG_PCI_BASE_REGS	0xBEC00000 */	/* internal PCI regs	*/
+/* #define CFG_PCI_BASE_CYCLE	0xBED00000 */	/* internal PCI regs	*/
+
+/* System RAM mapped to PCI space */
+#define CONFIG_PCI_SYS_MEM_BUS	CFG_SDRAM_BASE
+#define CONFIG_PCI_SYS_MEM_PHYS	CFG_SDRAM_BASE
+#define CONFIG_PCI_SYS_MEM_SIZE	(1024 * 1024 * 1024)
+
+#define CFG_FPGA_BASE		0xe2000000	/* epld			*/
+#define CFG_OPER_FLASH		0xe7000000	/* SRAM - OPER Flash	*/
+
+/* #define CFG_NVRAM_BASE_ADDR 0x08000000 */
+/*-----------------------------------------------------------------------
+ * Initial RAM & stack pointer (placed in internal SRAM)
+ *----------------------------------------------------------------------*/
+#define CFG_TEMP_STACK_OCM	1
+#define CFG_OCM_DATA_ADDR	CFG_ISRAM_BASE
+#define CFG_INIT_RAM_ADDR	CFG_ISRAM_BASE	/* Initial RAM address	*/
+#define CFG_INIT_RAM_END	0x2000		/* End of used area in RAM */
+#define CFG_GBL_DATA_SIZE	128		/* num bytes initial data */
+
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_POST_WORD_ADDR	(CFG_GBL_DATA_OFFSET - 0x4)
+#define CFG_INIT_SP_OFFSET	CFG_POST_WORD_ADDR
+
+#define CFG_MONITOR_LEN		(320 * 1024)	/* Reserve 320 kB for Mon */
+#define CFG_MALLOC_LEN		(512 * 1024)	/* Reserve 512 kB for malloc */
+
+/*-----------------------------------------------------------------------
+ * Serial Port
+ *----------------------------------------------------------------------*/
+#define CONFIG_SERIAL_MULTI	1
+#undef CONFIG_UART1_CONSOLE
+
+#undef	CONFIG_SERIAL_SOFTWARE_FIFO
+#undef CFG_EXT_SERIAL_CLOCK
+/* #define CFG_EXT_SERIAL_CLOCK	(1843200 * 6) */ /* Ext clk @ 11.059 MHz */
+
+#define CONFIG_BAUDRATE		115200
+
+#define CFG_BAUDRATE_TABLE  \
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+/*-----------------------------------------------------------------------
+ * DDR SDRAM
+ *----------------------------------------------------------------------*/
+#undef CONFIG_SPD_EEPROM		/* Use SPD EEPROM for setup	*/
+#define SPD_EEPROM_ADDRESS {0x53, 0x52}	/* SPD i2c spd addresses	*/
+#define IIC0_DIMM0_ADDR		0x53
+#define IIC0_DIMM1_ADDR		0x52
+
+/*-----------------------------------------------------------------------
+ * I2C
+ *----------------------------------------------------------------------*/
+#define CONFIG_HARD_I2C		1	/* I2C with hardware support	*/
+#undef	CONFIG_SOFT_I2C			/* I2C bit-banged		*/
+#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CFG_I2C_SLAVE		0x7F
+
+#define IIC0_BOOTPROM_ADDR	0x50
+#define IIC0_ALT_BOOTPROM_ADDR	0x54
+
+/* Don't probe these addrs */
+#define CFG_I2C_NOPROBES	{0x50, 0x52, 0x53, 0x54}
+
+/* #if (CONFIG_COMMANDS & CFG_CMD_EEPROM) */
+/* #define CFG_I2C_EEPROM_ADDR	0x50 */	/* I2C boot EEPROM		*/
+#define CFG_I2C_EEPROM_ADDR_LEN	2	/* Bytes of address		*/
+/* #endif */
+
+/*-----------------------------------------------------------------------
+ * Environment
+ *----------------------------------------------------------------------*/
+/* #define CFG_NVRAM_SIZE	(0x2000 - 8) */	/* NVRAM size(8k)- RTC regs */
+
+#undef  CFG_ENV_IS_IN_NVRAM		/* ... not in NVRAM		*/
+#define	CFG_ENV_IS_IN_FLASH	1	/* Environment uses flash	*/
+#undef	CFG_ENV_IS_IN_EEPROM		/* ... not in EEPROM		*/
+#define CONFIG_ENV_OVERWRITE	1
+
+#define CONFIG_PREBOOT	"echo;"	\
+	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+	"echo"
+
+#undef	CONFIG_BOOTARGS
+
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+	"netdev=eth0\0"							\
+	"hostname=yucca\0"						\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=${serverip}:${rootpath}\0"			\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"addip=setenv bootargs ${bootargs} "				\
+		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
+		":${hostname}:${netdev}:off panic=1\0"			\
+	"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
+	"flash_nfs=run nfsargs addip addtty;"				\
+		"bootm ${kernel_addr}\0"				\
+	"flash_self=run ramargs addip addtty;"				\
+		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
+	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"     \
+		"bootm\0"						\
+	"rootpath=/opt/eldk/ppc_4xx\0"				\
+	"bootfile=yucca/uImage\0"					\
+	"kernel_addr=E7F10000\0"					\
+	"ramdisk_addr=E7F20000\0"					\
+	"load=tftp 100000 yuca/u-boot.bin\0"				\
+	"update=protect off 2:4-7;era 2:4-7;"				\
+		"cp.b ${fileaddr} FFFB0000 ${filesize};"		\
+		"setenv filesize;saveenv\0"				\
+	"upd=run load;run update\0"					\
+	""
+#define CONFIG_BOOTCOMMAND	"run flash_self"
+
+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
+#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+
+#define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
+				CFG_CMD_ASKENV	| \
+				CFG_CMD_EEPROM	| \
+				CFG_CMD_DHCP	| \
+				CFG_CMD_DIAG	| \
+				CFG_CMD_ELF	| \
+				CFG_CMD_I2C	| \
+				CFG_CMD_IRQ	| \
+				CFG_CMD_MII	| \
+				CFG_CMD_NET	| \
+				CFG_CMD_NFS	| \
+				CFG_CMD_PCI	| \
+				CFG_CMD_PING	| \
+				CFG_CMD_REGINFO	| \
+				CFG_CMD_SDRAM	)
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#define CONFIG_MII		1	/* MII PHY management		*/
+#undef CONFIG_NET_MULTI
+#define CONFIG_PHY_ADDR		1	/* PHY address, See schematics	*/
+#define CONFIG_HAS_ETH0
+#define CONFIG_PHY_RESET        1	/* reset phy upon startup	*/
+#define CONFIG_PHY_RESET_DELAY	1000
+#define CONFIG_CIS8201_PHY	1	/* Enable 'special' RGMII mode for Cicada phy */
+#define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
+#define CFG_RX_ETH_BUFFER	32	/* Number of ethernet rx buffers & descriptors */
+
+#undef CONFIG_WATCHDOG			/* watchdog disabled		*/
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP				/* undef to save memory		*/
+#define CFG_PROMPT		"=> "		/* Monitor Command Prompt	*/
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE		1024		/* Console I/O Buffer Size	*/
+#else
+#define CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
+#endif
+#define CFG_PBSIZE		(CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS		16		/* max number of command args	*/
+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+
+#define CFG_MEMTEST_START	0x0400000	/* memtest works on		*/
+#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM		*/
+
+#define CFG_LOAD_ADDR		0x100000	/* default load address		*/
+#define CFG_EXTBDINFO		1		/* To use extended board_into (bd_t) */
+
+#define CFG_HZ			1000		/* decrementer freq: 1 ms ticks */
+
+/*-----------------------------------------------------------------------
+ * FLASH related
+ *----------------------------------------------------------------------*/
+#define CFG_MAX_FLASH_BANKS	3	/* number of banks		*/
+#define CFG_MAX_FLASH_SECT	256	/* sectors per device		*/
+
+#undef	CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms) */
+
+#define CFG_FLASH_ADDR0		0x5555
+#define CFG_FLASH_ADDR1		0x2aaa
+#define CFG_FLASH_WORD_SIZE	unsigned char
+
+#define CFG_FLASH_2ND_16BIT_DEV	1	/* evb440SPe has 8 and 16bit device */
+#define CFG_FLASH_2ND_ADDR	0xe7c00000 /* evb440SPe has 8 and 16bit device*/
+
+#ifdef CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_SECT_SIZE	0x10000	/* size of one complete sector	*/
+#define CFG_ENV_ADDR		0xfffa0000
+/* #define CFG_ENV_ADDR		(CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE) */
+#define CFG_ENV_SIZE		0x10000	/* Size of Environment vars	*/
+#endif /* CFG_ENV_IS_IN_FLASH */
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *-----------------------------------------------------------------------
+ */
+/* General PCI */
+#define CONFIG_PCI			/* include pci support		*/
+#define CONFIG_PCI_PNP		1	/* do pci plug-and-play		*/
+#define CONFIG_PCI_SCAN_SHOW	1	/* show pci devices on startup	*/
+#undef CONFIG_PCI_CONFIG_HOST_BRIDGE
+
+/* Board-specific PCI */
+#define CFG_PCI_PRE_INIT	1	/* enable board pci_pre_init()	*/
+#define CFG_PCI_TARGET_INIT		/* let board init pci target    */
+#undef	CFG_PCI_MASTER_INIT
+
+#define CFG_PCI_SUBSYS_VENDORID 0x1014	/* IBM				*/
+#define CFG_PCI_SUBSYS_DEVICEID 0xcafe	/* Whatever			*/
+/* #define CFG_PCI_SUBSYS_ID	CFG_PCI_SUBSYS_DEVICEID */
+
+/*
+ *  NETWORK Support (PCI):
+ */
+/* Support for Intel 82557/82559/82559ER chips. */
+#define CONFIG_EEPRO100
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ		(8 << 20)	/*Initial Memory map for Linux*/
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_DCACHE_SIZE		8192	/* For AMCC 405 CPUs		*/
+#define CFG_CACHELINE_SIZE	32	/* ...				*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM	0x02		/* Software reboot */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
+#endif
+
+/* FB Divisor selection */
+#define FPGA_FB_DIV_6		6
+#define FPGA_FB_DIV_10		10
+#define FPGA_FB_DIV_12		12
+#define FPGA_FB_DIV_20		20
+
+/* VCO Divisor selection */
+#define	FPGA_VCO_DIV_4		4
+#define	FPGA_VCO_DIV_6		6
+#define	FPGA_VCO_DIV_8		8
+#define	FPGA_VCO_DIV_10		10
+
+/*----------------------------------------------------------------------------+
+| FPGA registers and bit definitions
++----------------------------------------------------------------------------*/
+/* PowerPC 440SPe Board FPGA is reached with physical address 0x1 E2000000. */
+/* TLB initialization makes it correspond to logical address 0xE2000000. */
+/* => Done init_chip.s in bootlib */
+#define FPGA_REG_BASE_ADDR	0xE2000000
+#define FPGA_GPIO_BASE_ADDR	0xE2010000
+#define FPGA_INT_BASE_ADDR	0xE2020000
+
+/*----------------------------------------------------------------------------+
+| Display
++----------------------------------------------------------------------------*/
+#define PPC440SPE_DISPLAY	FPGA_REG_BASE_ADDR
+
+#define PPC440SPE_DISPLAY_D8	(FPGA_REG_BASE_ADDR+0x06)
+#define PPC440SPE_DISPLAY_D4	(FPGA_REG_BASE_ADDR+0x04)
+#define PPC440SPE_DISPLAY_D2	(FPGA_REG_BASE_ADDR+0x02)
+#define PPC440SPE_DISPLAY_D1	(FPGA_REG_BASE_ADDR+0x00)
+/*define   WRITE_DISPLAY_DIGIT(n) IOREG8(FPGA_REG_BASE_ADDR + (2*n))*/
+/*#define   IOREG8(addr) *((volatile unsigned char *)(addr))*/
+
+/*----------------------------------------------------------------------------+
+| ethernet/reset/boot Register 1
++----------------------------------------------------------------------------*/
+#define FPGA_REG10	(FPGA_REG_BASE_ADDR+0x10)
+
+#define FPGA_REG10_10MHZ_ENABLE		0x8000
+#define FPGA_REG10_100MHZ_ENABLE	0x4000
+#define FPGA_REG10_GIGABIT_ENABLE	0x2000
+#define FPGA_REG10_FULL_DUPLEX		0x1000	/* force Full Duplex*/
+#define FPGA_REG10_RESET_ETH		0x0800
+#define FPGA_REG10_AUTO_NEG_DIS		0x0400
+#define FPGA_REG10_INTP_ETH		0x0200
+
+#define FPGA_REG10_RESET_HISR		0x0080
+#define FPGA_REG10_ENABLE_DISPLAY	0x0040
+#define FPGA_REG10_RESET_SDRAM		0x0020
+#define FPGA_REG10_OPER_BOOT		0x0010
+#define FPGA_REG10_SRAM_BOOT		0x0008
+#define FPGA_REG10_SMALL_BOOT		0x0004
+#define FPGA_REG10_FORCE_COLA		0x0002
+#define FPGA_REG10_COLA_MANUAL		0x0001
+
+#define FPGA_REG10_SDRAM_ENABLE		0x0020
+
+#define FPGA_REG10_ENET_ENCODE2(n) ((((unsigned long)(n))&0x0F)<<4) /*from ocotea ?*/
+#define FPGA_REG10_ENET_DECODE2(n) ((((unsigned long)(n))>>4)&0x0F) /*from ocotea ?*/
+
+/*----------------------------------------------------------------------------+
+| MUX control
++----------------------------------------------------------------------------*/
+#define FPGA_REG12	(FPGA_REG_BASE_ADDR+0x12)
+
+#define FPGA_REG12_EBC_CTL		0x8000
+#define FPGA_REG12_UART1_CTS_RTS	0x4000
+#define FPGA_REG12_UART0_RX_ENABLE	0x2000
+#define FPGA_REG12_UART1_RX_ENABLE	0x1000
+#define FPGA_REG12_UART2_RX_ENABLE	0x0800
+#define FPGA_REG12_EBC_OUT_ENABLE	0x0400
+#define FPGA_REG12_GPIO0_OUT_ENABLE	0x0200
+#define FPGA_REG12_GPIO1_OUT_ENABLE	0x0100
+#define FPGA_REG12_GPIO_SELECT		0x0010
+#define FPGA_REG12_GPIO_CHREG		0x0008
+#define FPGA_REG12_GPIO_CLK_CHREG	0x0004
+#define FPGA_REG12_GPIO_OETRI		0x0002
+#define FPGA_REG12_EBC_ERROR		0x0001
+
+/*----------------------------------------------------------------------------+
+| PCI Clock control
++----------------------------------------------------------------------------*/
+#define FPGA_REG16	(FPGA_REG_BASE_ADDR+0x16)
+
+#define FPGA_REG16_PCI_CLK_CTL0		0x8000
+#define FPGA_REG16_PCI_CLK_CTL1		0x4000
+#define FPGA_REG16_PCI_CLK_CTL2		0x2000
+#define FPGA_REG16_PCI_CLK_CTL3		0x1000
+#define FPGA_REG16_PCI_CLK_CTL4		0x0800
+#define FPGA_REG16_PCI_CLK_CTL5		0x0400
+#define FPGA_REG16_PCI_CLK_CTL6		0x0200
+#define FPGA_REG16_PCI_CLK_CTL7		0x0100
+#define FPGA_REG16_PCI_CLK_CTL8		0x0080
+#define FPGA_REG16_PCI_CLK_CTL9		0x0040
+#define FPGA_REG16_PCI_EXT_ARB0		0x0020
+#define FPGA_REG16_PCI_MODE_1		0x0010
+#define FPGA_REG16_PCI_TARGET_MODE	0x0008
+#define FPGA_REG16_PCI_INTP_MODE	0x0004
+
+/* FB1 Divisor selection */
+#define FPGA_REG16_FB2_DIV_MASK		0x1000
+#define FPGA_REG16_FB2_DIV_LOW		0x0000
+#define FPGA_REG16_FB2_DIV_HIGH		0x1000
+/* FB2 Divisor selection */
+/* S3 switch on Board */
+#define FPGA_REG16_FB1_DIV_MASK		0x2000
+#define FPGA_REG16_FB1_DIV_LOW		0x0000
+#define FPGA_REG16_FB1_DIV_HIGH		0x2000
+/* PCI0 Clock Selection */
+/* S3 switch on Board */
+#define FPGA_REG16_PCI0_CLK_MASK	0x0c00
+#define FPGA_REG16_PCI0_CLK_33_33	0x0000
+#define FPGA_REG16_PCI0_CLK_66_66	0x0800
+#define FPGA_REG16_PCI0_CLK_100		0x0400
+#define FPGA_REG16_PCI0_CLK_133_33	0x0c00
+/* VCO Divisor selection */
+/* S3 switch on Board */
+#define FPGA_REG16_VCO_DIV_MASK		0xc000
+#define FPGA_REG16_VCO_DIV_4		0x0000
+#define FPGA_REG16_VCO_DIV_8		0x4000
+#define FPGA_REG16_VCO_DIV_6		0x8000
+#define FPGA_REG16_VCO_DIV_10		0xc000
+/* Master Clock Selection */
+/* S3, S4 switches on Board */
+#define FPGA_REG16_MASTER_CLK_MASK	0x01c0
+#define FPGA_REG16_MASTER_CLK_EXT	0x0000
+#define FPGA_REG16_MASTER_CLK_66_66	0x0040
+#define FPGA_REG16_MASTER_CLK_50	0x0080
+#define FPGA_REG16_MASTER_CLK_33_33	0x00c0
+#define FPGA_REG16_MASTER_CLK_25	0x0100
+
+/*----------------------------------------------------------------------------+
+| PCI Miscellaneous
++----------------------------------------------------------------------------*/
+#define FPGA_REG18	(FPGA_REG_BASE_ADDR+0x18)
+
+#define FPGA_REG18_PCI_PRSNT1		0x8000
+#define FPGA_REG18_PCI_PRSNT2		0x4000
+#define FPGA_REG18_PCI_INTA		0x2000
+#define FPGA_REG18_PCI_SLOT0_INTP	0x1000
+#define FPGA_REG18_PCI_SLOT1_INTP	0x0800
+#define FPGA_REG18_PCI_SLOT2_INTP	0x0400
+#define FPGA_REG18_PCI_SLOT3_INTP	0x0200
+#define FPGA_REG18_PCI_PCI0_VC		0x0100
+#define FPGA_REG18_PCI_PCI0_VTH1	0x0080
+#define FPGA_REG18_PCI_PCI0_VTH2	0x0040
+#define FPGA_REG18_PCI_PCI0_VTH3	0x0020
+
+/*----------------------------------------------------------------------------+
+| PCIe Miscellaneous
++----------------------------------------------------------------------------*/
+#define FPGA_REG1A	(FPGA_REG_BASE_ADDR+0x1A)
+
+#define FPGA_REG1A_PE0_GLED		0x8000
+#define FPGA_REG1A_PE1_GLED		0x4000
+#define FPGA_REG1A_PE2_GLED		0x2000
+#define FPGA_REG1A_PE0_YLED		0x1000
+#define FPGA_REG1A_PE1_YLED		0x0800
+#define FPGA_REG1A_PE2_YLED		0x0400
+#define FPGA_REG1A_PE0_PWRON		0x0200
+#define FPGA_REG1A_PE1_PWRON		0x0100
+#define FPGA_REG1A_PE2_PWRON		0x0080
+#define FPGA_REG1A_PE0_REFCLK_ENABLE	0x0040
+#define FPGA_REG1A_PE1_REFCLK_ENABLE	0x0020
+#define FPGA_REG1A_PE2_REFCLK_ENABLE	0x0010
+#define FPGA_REG1A_PE_SPREAD0		0x0008
+#define FPGA_REG1A_PE_SPREAD1		0x0004
+#define FPGA_REG1A_PE_SELSOURCE_0	0x0002
+#define FPGA_REG1A_PE_SELSOURCE_1	0x0001
+
+/*----------------------------------------------------------------------------+
+| PCIe Miscellaneous
++----------------------------------------------------------------------------*/
+#define FPGA_REG1C	(FPGA_REG_BASE_ADDR+0x1C)
+
+#define FPGA_REG1C_PE0_ROOTPOINT	0x8000
+#define FPGA_REG1C_PE1_ENDPOINT		0x4000
+#define FPGA_REG1C_PE2_ENDPOINT		0x2000
+#define FPGA_REG1C_PE0_PRSNT		0x1000
+#define FPGA_REG1C_PE1_PRSNT		0x0800
+#define FPGA_REG1C_PE2_PRSNT		0x0400
+#define FPGA_REG1C_PE0_WAKE		0x0080
+#define FPGA_REG1C_PE1_WAKE		0x0040
+#define FPGA_REG1C_PE2_WAKE		0x0020
+#define FPGA_REG1C_PE0_PERST		0x0010
+#define FPGA_REG1C_PE1_PERST		0x0080
+#define FPGA_REG1C_PE2_PERST		0x0040
+
+/*----------------------------------------------------------------------------+
+| Defines
++----------------------------------------------------------------------------*/
+#define PERIOD_133_33MHZ	7500	/* 7,5ns */
+#define PERIOD_100_00MHZ	10000	/* 10ns */
+#define PERIOD_83_33MHZ		12000	/* 12ns */
+#define PERIOD_75_00MHZ		13333	/* 13,333ns */
+#define PERIOD_66_66MHZ		15000	/* 15ns */
+#define PERIOD_50_00MHZ		20000	/* 20ns */
+#define PERIOD_33_33MHZ		30000	/* 30ns */
+#define PERIOD_25_00MHZ		40000	/* 40ns */
+
+/*---------------------------------------------------------------------------*/
+
+#endif	/* __CONFIG_H */
diff --git a/include/galileo/core.h b/include/galileo/core.h
index 0735d075b3..49f4dd2d21 100644
--- a/include/galileo/core.h
+++ b/include/galileo/core.h
@@ -110,7 +110,10 @@ extern unsigned int INTERNAL_REG_BASE_ADDR;
 #define _1G             0x40000000
 #define _2G             0x80000000
 
+#ifndef	BOOL_WAS_DEFINED
+#define BOOL_WAS_DEFINED
 typedef enum _bool{false,true} bool;
+#endif
 
 /* Little to Big endian conversion macros */
 
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index a5227188d4..4b485643a1 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -2,7 +2,7 @@
  *  linux/include/linux/mtd/nand.h
  *
  *  Copyright (c) 2000 David Woodhouse <dwmw2@mvhi.com>
- *                     Steven J. Hill <sjhill@realitydiluted.com>
+ *		       Steven J. Hill <sjhill@realitydiluted.com>
  *		       Thomas Gleixner <tglx@linutronix.de>
  *
  * $Id: nand.h,v 1.68 2004/11/12 10:40:37 gleixner Exp $
@@ -15,15 +15,15 @@
  *   Contains standard defines and IDs for NAND flash devices
  *
  *  Changelog:
- *   01-31-2000 DMW     Created
- *   09-18-2000 SJH     Moved structure out of the Disk-On-Chip drivers
+ *   01-31-2000 DMW	Created
+ *   09-18-2000 SJH	Moved structure out of the Disk-On-Chip drivers
  *			so it can be used by other NAND flash device
  *			drivers. I also changed the copyright since none
  *			of the original contents of this file are specific
  *			to DoC devices. David can whack me with a baseball
  *			bat later if I did something naughty.
- *   10-11-2000 SJH     Added private NAND flash structure for driver
- *   10-24-2000 SJH     Added prototype for 'nand_scan' function
+ *   10-11-2000 SJH	Added private NAND flash structure for driver
+ *   10-24-2000 SJH	Added prototype for 'nand_scan' function
  *   10-29-2001 TG	changed nand_chip structure to support
  *			hardwarespecific function for accessing control lines
  *   02-21-2002 TG	added support for different read/write adress and
@@ -36,7 +36,7 @@
  *			CONFIG_MTD_NAND_ECC_JFFS2 is not set
  *   08-10-2002 TG	extensions to nand_chip structure to support HW-ECC
  *
- *   08-29-2002 tglx 	nand_chip structure: data_poi for selecting
+ *   08-29-2002 tglx	nand_chip structure: data_poi for selecting
  *			internal / fs-driver buffer
  *			support for 6byte/512byte hardware ECC
  *			read_ecc, write_ecc extended for different oob-layout
@@ -45,8 +45,8 @@
  *  11-25-2002 tglx	Added Manufacturer code FUJITSU, NATIONAL
  *			Split manufacturer and device ID structures
  *
- *  02-08-2004 tglx 	added option field to nand structure for chip anomalities
- *  05-25-2004 tglx 	added bad block table support, ST-MICRO manufacturer id
+ *  02-08-2004 tglx	added option field to nand structure for chip anomalities
+ *  05-25-2004 tglx	added bad block table support, ST-MICRO manufacturer id
  *			update of nand_chip structure description
  */
 #ifndef __LINUX_MTD_NAND_H
@@ -75,7 +75,7 @@ extern int nand_read_raw (struct mtd_info *mtd, uint8_t *buf, loff_t from, size_
  * Constants for hardware specific CLE/ALE/NCE function
 */
 /* Select the chip by setting nCE to low */
-#define NAND_CTL_SETNCE 	1
+#define NAND_CTL_SETNCE		1
 /* Deselect the chip by setting nCE to high */
 #define NAND_CTL_CLRNCE		2
 /* Select the command latch by setting CLE to high */
@@ -215,7 +215,7 @@ struct nand_chip;
 #if 0
 /**
  * struct nand_hw_control - Control structure for hardware controller (e.g ECC generator) shared among independend devices
- * @lock:               protection lock
+ * @lock:		protection lock
  * @active:		the mtd device which holds the controller currently
  */
 struct nand_hw_control {
@@ -244,20 +244,20 @@ struct nand_hw_control {
  *			is read from the chip status register
  * @cmdfunc:		[REPLACEABLE] hardwarespecific function for writing commands to the chip
  * @waitfunc:		[REPLACEABLE] hardwarespecific function for wait on ready
- * @calculate_ecc: 	[REPLACEABLE] function for ecc calculation or readback from ecc hardware
+ * @calculate_ecc:	[REPLACEABLE] function for ecc calculation or readback from ecc hardware
  * @correct_data:	[REPLACEABLE] function for ecc correction, matching to ecc generator (sw/hw)
  * @enable_hwecc:	[BOARDSPECIFIC] function to enable (reset) hardware ecc generator. Must only
  *			be provided if a hardware ECC is available
  * @erase_cmd:		[INTERN] erase command write function, selectable due to AND support
  * @scan_bbt:		[REPLACEABLE] function to scan bad block table
  * @eccmode:		[BOARDSPECIFIC] mode of ecc, see defines
- * @eccsize: 		[INTERN] databytes used per ecc-calculation
- * @eccbytes: 		[INTERN] number of ecc bytes per ecc-calculation step
+ * @eccsize:		[INTERN] databytes used per ecc-calculation
+ * @eccbytes:		[INTERN] number of ecc bytes per ecc-calculation step
  * @eccsteps:		[INTERN] number of ecc calculation steps per page
  * @chip_delay:		[BOARDSPECIFIC] chip dependent delay for transfering data from array to read regs (tR)
  * @chip_lock:		[INTERN] spinlock used to protect access to this structure and the chip
  * @wq:			[INTERN] wait queue to sleep on if a NAND operation is in progress
- * @state: 		[INTERN] the current state of the NAND device
+ * @state:		[INTERN] the current state of the NAND device
  * @page_shift:		[INTERN] number of address bits in a page (column address bits)
  * @phys_erase_shift:	[INTERN] number of address bits in a physical eraseblock
  * @bbt_erase_shift:	[INTERN] number of address bits in a bbt entry
@@ -284,7 +284,7 @@ struct nand_hw_control {
 
 struct nand_chip {
 	void  __iomem	*IO_ADDR_R;
-	void  __iomem 	*IO_ADDR_W;
+	void  __iomem	*IO_ADDR_W;
 
 	u_char		(*read_byte)(struct mtd_info *mtd);
 	void		(*write_byte)(struct mtd_info *mtd, u_char byte);
@@ -297,12 +297,12 @@ struct nand_chip {
 	void		(*select_chip)(struct mtd_info *mtd, int chip);
 	int		(*block_bad)(struct mtd_info *mtd, loff_t ofs, int getchip);
 	int		(*block_markbad)(struct mtd_info *mtd, loff_t ofs);
-	void 		(*hwcontrol)(struct mtd_info *mtd, int cmd);
-	int  		(*dev_ready)(struct mtd_info *mtd);
-	void 		(*cmdfunc)(struct mtd_info *mtd, unsigned command, int column, int page_addr);
-	int 		(*waitfunc)(struct mtd_info *mtd, struct nand_chip *this, int state);
+	void		(*hwcontrol)(struct mtd_info *mtd, int cmd);
+	int		(*dev_ready)(struct mtd_info *mtd);
+	void		(*cmdfunc)(struct mtd_info *mtd, unsigned command, int column, int page_addr);
+	int		(*waitfunc)(struct mtd_info *mtd, struct nand_chip *this, int state);
 	int		(*calculate_ecc)(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code);
-	int 		(*correct_data)(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc);
+	int		(*correct_data)(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc);
 	void		(*enable_hwecc)(struct mtd_info *mtd, int mode);
 	void		(*erase_cmd)(struct mtd_info *mtd, int page);
 	int		(*scan_bbt)(struct mtd_info *mtd);
@@ -310,17 +310,17 @@ struct nand_chip {
 	int		eccsize;
 	int		eccbytes;
 	int		eccsteps;
-	int 		chip_delay;
+	int		chip_delay;
 #if 0
 	spinlock_t	chip_lock;
 	wait_queue_head_t wq;
-	nand_state_t 	state;
+	nand_state_t	state;
 #endif
-	int 		page_shift;
+	int		page_shift;
 	int		phys_erase_shift;
 	int		bbt_erase_shift;
 	int		chip_shift;
-	u_char 		*data_buf;
+	u_char		*data_buf;
 	u_char		*oob_buf;
 	int		oobdirty;
 	u_char		*data_poi;
@@ -335,7 +335,7 @@ struct nand_chip {
 	struct nand_bbt_descr	*bbt_td;
 	struct nand_bbt_descr	*bbt_md;
 	struct nand_bbt_descr	*badblock_pattern;
-	struct nand_hw_control  *controller;
+	struct nand_hw_control	*controller;
 	void		*priv;
 };
 
@@ -352,14 +352,14 @@ struct nand_chip {
 /**
  * struct nand_flash_dev - NAND Flash Device ID Structure
  *
- * @name:  	Identify the device type
- * @id:   	device ID code
- * @pagesize:  	Pagesize in bytes. Either 256 or 512 or 0
+ * @name:	Identify the device type
+ * @id:		device ID code
+ * @pagesize:	Pagesize in bytes. Either 256 or 512 or 0
  *		If the pagesize is 0, then the real pagesize
  *		and the eraseize are determined from the
  *		extended id bytes in the chip
- * @erasesize: 	Size of an erase block in the flash device.
- * @chipsize:  	Total chipsize in Mega Bytes
+ * @erasesize:	Size of an erase block in the flash device.
+ * @chipsize:	Total chipsize in Mega Bytes
  * @options:	Bitfield to store chip relevant options
  */
 struct nand_flash_dev {
@@ -374,7 +374,7 @@ struct nand_flash_dev {
 /**
  * struct nand_manufacturers - NAND Flash Manufacturer ID Structure
  * @name:	Manufacturer name
- * @id: 	manufacturer ID code of device.
+ * @id:		manufacturer ID code of device.
 */
 struct nand_manufacturers {
 	int id;
@@ -398,7 +398,7 @@ extern struct nand_manufacturers nand_manuf_ids[];
  *		blocks is reserved at the end of the device where the tables are
  *		written.
  * @reserved_block_code: if non-0, this pattern denotes a reserved (rather than
- *              bad) block in the stored bbt
+ *		bad) block in the stored bbt
  * @pattern:	pattern to identify bad block table or factory marked good /
  *		bad blocks, can be NULL, if len = 0
  *
@@ -412,11 +412,11 @@ struct nand_bbt_descr {
 	int	pages[NAND_MAX_CHIPS];
 	int	offs;
 	int	veroffs;
-	uint8_t	version[NAND_MAX_CHIPS];
+	uint8_t version[NAND_MAX_CHIPS];
 	int	len;
-	int 	maxblocks;
+	int	maxblocks;
 	int	reserved_block_code;
-	uint8_t	*pattern;
+	uint8_t *pattern;
 };
 
 /* Options for the bad block table descriptors */
@@ -428,7 +428,7 @@ struct nand_bbt_descr {
 #define NAND_BBT_4BIT		0x00000004
 #define NAND_BBT_8BIT		0x00000008
 /* The bad block table is in the last good block of the device */
-#define	NAND_BBT_LASTBLOCK	0x00000010
+#define NAND_BBT_LASTBLOCK	0x00000010
 /* The bbt is at the given page, else we must scan for the bbt */
 #define NAND_BBT_ABSPAGE	0x00000020
 /* The bbt is at the given page, else we must scan for the bbt */
@@ -451,7 +451,7 @@ struct nand_bbt_descr {
 #define NAND_BBT_SCAN2NDPAGE	0x00004000
 
 /* The maximum number of blocks to scan for a bbt */
-#define NAND_BBT_SCAN_MAXBLOCKS	4
+#define NAND_BBT_SCAN_MAXBLOCKS 4
 
 extern int nand_scan_bbt (struct mtd_info *mtd, struct nand_bbt_descr *bd);
 extern int nand_update_bbt (struct mtd_info *mtd, loff_t offs);
diff --git a/include/nios2-epcs.h b/include/nios2-epcs.h
index 2c9522cfd8..20e0c87c89 100644
--- a/include/nios2-epcs.h
+++ b/include/nios2-epcs.h
@@ -38,6 +38,11 @@ typedef struct epcs_devinfo_t {
 	unsigned char   prot_mask;	/* Protection mask */
 }epcs_devinfo_t;
 
+/* Resets the epcs controller -- to prevent (potential) soft-reset
+ * problems when booting from the epcs controller
+ */
+extern int epcs_reset (void);
+
 /* Returns the devinfo struct if EPCS device is found;
  * NULL otherwise.
  */
diff --git a/include/ns16550.h b/include/ns16550.h
index d987a8b7ed..34888a1028 100644
--- a/include/ns16550.h
+++ b/include/ns16550.h
@@ -7,6 +7,9 @@
  * added prototypes for ns16550.c
  * reduced no of com ports to 2
  * modifications (c) Rob Taylor, Flying Pig Systems. 2000.
+ *
+ * added support for port on 64-bit bus
+ * by Richard Danter (richard.danter@windriver.com), (C) 2005 Wind River Systems
  */
 
 #if (CFG_NS16550_REG_SIZE == 1)
@@ -82,6 +85,25 @@ struct NS16550 {
 	int pad10:24;
 #endif
 } __attribute__ ((packed));
+#elif (CFG_NS16550_REG_SIZE == -8)
+struct NS16550 {
+	unsigned char rbr;		/* 0 */
+	unsigned char pad0[7];
+	unsigned char ier;		/* 1 */
+	unsigned char pad1[7];
+	unsigned char fcr;		/* 2 */
+	unsigned char pad2[7];
+	unsigned char lcr;		/* 3 */
+	unsigned char pad3[7];
+	unsigned char mcr;		/* 4 */
+	unsigned char pad4[7];
+	unsigned char lsr;		/* 5 */
+	unsigned char pad5[7];
+	unsigned char msr;		/* 6 */
+	unsigned char pad6[7];
+	unsigned char scr;		/* 7 */
+	unsigned char pad7[7];
+} __attribute__ ((packed));
 #else
 #error "Please define NS16550 registers size."
 #endif
diff --git a/include/pcmcia.h b/include/pcmcia.h
index 43d4510ed2..8f564da9b8 100644
--- a/include/pcmcia.h
+++ b/include/pcmcia.h
@@ -308,4 +308,14 @@ typedef struct {
 
 #endif	/* CFG_CMD_PCMCIA || CFG_CMD_IDE && (CONFIG_IDE_8xx_PCCARD || CONFIG_IDE_8xx_DIRECT) */
 
+#ifdef	CONFIG_8xx
+extern u_int *pcmcia_pgcrx[];
+#define	PCMCIA_PGCRX(slot)	(*pcmcia_pgcrx[slot])
+#endif
+
+#if	(CONFIG_COMMANDS & CFG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD) \
+	|| defined(CONFIG_PXA_PCMCIA)
+extern int check_ide_device(int slot);
+#endif
+
 #endif /* _PCMCIA_H */
diff --git a/include/ppc440.h b/include/ppc440.h
index 53f14b5080..d5a9f66a41 100644
--- a/include/ppc440.h
+++ b/include/ppc440.h
@@ -25,6 +25,8 @@
 /*--------------------------------------------------------------------- */
 /* Special Purpose Registers						*/
 /*--------------------------------------------------------------------- */
+#define	 xer_reg 0x001
+#define	 lr_reg	0x008
 #define	 dec	0x016	/* decrementer */
 #define	 srr0	0x01a	/* save/restore register 0 */
 #define	 srr1	0x01b	/* save/restore register 1 */
@@ -37,6 +39,8 @@
 #define	 ivpr	0x03f	/* interrupt prefix register */
 #define	 usprg0 0x100	/* user special purpose register general 0 */
 #define	 usprg1 0x110	/* user special purpose register general 1 */
+#define	 tblr	0x10c	/* time base lower, read only */
+#define	 tbur	0x10d	/* time base upper, read only */
 #define	 sprg1	0x111	/* special purpose register general 1 */
 #define	 sprg2	0x112	/* special purpose register general 2 */
 #define	 sprg3	0x113	/* special purpose register general 3 */
@@ -78,7 +82,7 @@
 #define	 ivor13 0x19d	/* interrupt vector offset register 13 */
 #define	 ivor14 0x19e	/* interrupt vector offset register 14 */
 #define	 ivor15 0x19f	/* interrupt vector offset register 15 */
-#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SP)
+#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
 #define	 mcsrr0 0x23a	/* machine check save/restore register 0 */
 #define	 mcsrr1 0x23b	/* mahcine check save/restore register 1 */
 #define	 mcsr	0x23c	/* machine check status register */
@@ -167,12 +171,10 @@
 #define sdr_malrbl	0x02a0
 #define sdr_maltbs	0x02c0
 #define sdr_malrbs	0x02e0
-#define sdr_pci0        0x0300
-#define sdr_usb0        0x0320
+#define sdr_pci0	0x0300
+#define sdr_usb0	0x0320
 #define sdr_cust0	0x4000
-#define sdr_sdstp2	0x4001
 #define sdr_cust1	0x4002
-#define sdr_sdstp3	0x4003
 #define sdr_pfc0	0x4100	/* Pin Function 0 */
 #define sdr_pfc1	0x4101	/* Pin Function 1 */
 #define sdr_plbtr	0x4200
@@ -212,6 +214,551 @@
 #define mem_dlycal	0x0084	/* delay line calibration register	    */
 #define mem_eccesr	0x0098	/* ECC error status			    */
 
+#ifdef CONFIG_440GX
+#define sdr_amp		0x0240
+#define sdr_xpllc	0x01c1
+#define sdr_xplld	0x01c2
+#define sdr_xcr		0x01c0
+#define sdr_sdstp2	0x4001
+#define sdr_sdstp3	0x4003
+#endif	/* CONFIG_440GX */
+
+#ifdef CONFIG_440SPE
+#undef sdr_sdstp2
+#define sdr_sdstp2	0x0022
+#undef sdr_sdstp3
+#define sdr_sdstp3	0x0023
+#define sdr_ddr0	0x00E1
+#define sdr_uart2	0x0122
+#define sdr_xcr0	0x01c0
+/* #define sdr_xcr1	0x01c3	only one PCIX - SG */
+/* #define sdr_xcr2	0x01c6	only one PCIX - SG */
+#define sdr_xpllc0	0x01c1
+#define sdr_xplld0	0x01c2
+#define sdr_xpllc1	0x01c4	/*notRCW  - SG */
+#define sdr_xplld1	0x01c5	/*notRCW  - SG */
+#define sdr_xpllc2	0x01c7	/*notRCW  - SG */
+#define sdr_xplld2	0x01c8	/*notRCW  - SG */
+#define sdr_amp0	0x0240
+#define sdr_amp1	0x0241
+#define sdr_cust2	0x4004
+#define sdr_cust3	0x4006
+#define sdr_sdstp4	0x4001
+#define sdr_sdstp5	0x4003
+#define sdr_sdstp6	0x4005
+#define sdr_sdstp7	0x4007
+
+/*----------------------------------------------------------------------------+
+| Core Configuration/MMU configuration for 440 (CCR1 for 440x5 only).
++----------------------------------------------------------------------------*/
+#define CCR0_PRE		0x40000000
+#define CCR0_CRPE		0x08000000
+#define CCR0_DSTG		0x00200000
+#define CCR0_DAPUIB		0x00100000
+#define CCR0_DTB		0x00008000
+#define CCR0_GICBT		0x00004000
+#define CCR0_GDCBT		0x00002000
+#define CCR0_FLSTA		0x00000100
+#define CCR0_ICSLC_MASK		0x0000000C
+#define CCR0_ICSLT_MASK		0x00000003
+#define CCR1_TCS_MASK		0x00000080
+#define CCR1_TCS_INTCLK		0x00000000
+#define CCR1_TCS_EXTCLK		0x00000080
+#define MMUCR_SEOA		0x01000000
+#define MMUCR_U1TE		0x00400000
+#define MMUCR_U2SWOAE		0x00200000
+#define MMUCR_DULXE		0x00800000
+#define MMUCR_IULXE		0x00400000
+#define MMUCR_STS		0x00100000
+#define MMUCR_STID_MASK		0x000000FF
+
+#define SDR0_CFGADDR		0x00E
+#define SDR0_CFGDATA		0x00F
+
+/******************************************************************************
+ * PCI express defines
+ ******************************************************************************/
+#define SDR0_PE0UTLSET1		0x00000300	/* PE0 Upper transaction layer conf setting */
+#define SDR0_PE0UTLSET2		0x00000301	/* PE0 Upper transaction layer conf setting 2 */
+#define SDR0_PE0DLPSET		0x00000302	/* PE0 Data link & logical physical configuration */
+#define SDR0_PE0LOOP		0x00000303	/* PE0 Loopback interface status */
+#define SDR0_PE0RCSSET		0x00000304	/* PE0 Reset, clock & shutdown setting */
+#define SDR0_PE0RCSSTS		0x00000305	/* PE0 Reset, clock & shutdown status */
+#define SDR0_PE0HSSSET1L0	0x00000306	/* PE0 HSS Control Setting 1: Lane 0 */
+#define SDR0_PE0HSSSET2L0	0x00000307	/* PE0 HSS Control Setting 2: Lane 0 */
+#define SDR0_PE0HSSSTSL0	0x00000308	/* PE0 HSS Control Status : Lane 0 */
+#define SDR0_PE0HSSSET1L1	0x00000309	/* PE0 HSS Control Setting 1: Lane 1 */
+#define SDR0_PE0HSSSET2L1	0x0000030A	/* PE0 HSS Control Setting 2: Lane 1 */
+#define SDR0_PE0HSSSTSL1	0x0000030B	/* PE0 HSS Control Status : Lane 1 */
+#define SDR0_PE0HSSSET1L2	0x0000030C	/* PE0 HSS Control Setting 1: Lane 2 */
+#define SDR0_PE0HSSSET2L2	0x0000030D	/* PE0 HSS Control Setting 2: Lane 2 */
+#define SDR0_PE0HSSSTSL2	0x0000030E	/* PE0 HSS Control Status : Lane 2 */
+#define SDR0_PE0HSSSET1L3	0x0000030F	/* PE0 HSS Control Setting 1: Lane 3 */
+#define SDR0_PE0HSSSET2L3	0x00000310	/* PE0 HSS Control Setting 2: Lane 3 */
+#define SDR0_PE0HSSSTSL3	0x00000311	/* PE0 HSS Control Status : Lane 3 */
+#define SDR0_PE0HSSSET1L4	0x00000312	/* PE0 HSS Control Setting 1: Lane 4 */
+#define SDR0_PE0HSSSET2L4	0x00000313	/* PE0 HSS Control Setting 2: Lane 4 */
+#define SDR0_PE0HSSSTSL4	0x00000314	/* PE0 HSS Control Status : Lane 4 */
+#define SDR0_PE0HSSSET1L5	0x00000315	/* PE0 HSS Control Setting 1: Lane 5 */
+#define SDR0_PE0HSSSET2L5	0x00000316	/* PE0 HSS Control Setting 2: Lane 5 */
+#define SDR0_PE0HSSSTSL5	0x00000317	/* PE0 HSS Control Status : Lane 5 */
+#define SDR0_PE0HSSSET1L6	0x00000318	/* PE0 HSS Control Setting 1: Lane 6 */
+#define SDR0_PE0HSSSET2L6	0x00000319	/* PE0 HSS Control Setting 2: Lane 6 */
+#define SDR0_PE0HSSSTSL6	0x0000031A	/* PE0 HSS Control Status : Lane 6 */
+#define SDR0_PE0HSSSET1L7	0x0000031B	/* PE0 HSS Control Setting 1: Lane 7 */
+#define SDR0_PE0HSSSET2L7	0x0000031C	/* PE0 HSS Control Setting 2: Lane 7 */
+#define SDR0_PE0HSSSTSL7	0x0000031D	/* PE0 HSS Control Status : Lane 7 */
+#define SDR0_PE0HSSSEREN	0x0000031E	/* PE0 Serdes Transmitter Enable */
+#define SDR0_PE0LANEABCD	0x0000031F	/* PE0 Lanes ABCD affectation */
+#define SDR0_PE0LANEEFGH	0x00000320	/* PE0 Lanes EFGH affectation */
+
+#define SDR0_PE1UTLSET1		0x00000340	/* PE1 Upper transaction layer conf setting */
+#define SDR0_PE1UTLSET2		0x00000341	/* PE1 Upper transaction layer conf setting 2 */
+#define SDR0_PE1DLPSET		0x00000342	/* PE1 Data link & logical physical configuration */
+#define SDR0_PE1LOOP		0x00000343	/* PE1 Loopback interface status */
+#define SDR0_PE1RCSSET		0x00000344	/* PE1 Reset, clock & shutdown setting */
+#define SDR0_PE1RCSSTS		0x00000345	/* PE1 Reset, clock & shutdown status */
+#define SDR0_PE1HSSSET1L0	0x00000346	/* PE1 HSS Control Setting 1: Lane 0 */
+#define SDR0_PE1HSSSET2L0	0x00000347	/* PE1 HSS Control Setting 2: Lane 0 */
+#define SDR0_PE1HSSSTSL0	0x00000348	/* PE1 HSS Control Status : Lane 0 */
+#define SDR0_PE1HSSSET1L1	0x00000349	/* PE1 HSS Control Setting 1: Lane 1 */
+#define SDR0_PE1HSSSET2L1	0x0000034A	/* PE1 HSS Control Setting 2: Lane 1 */
+#define SDR0_PE1HSSSTSL1	0x0000034B	/* PE1 HSS Control Status : Lane 1 */
+#define SDR0_PE1HSSSET1L2	0x0000034C	/* PE1 HSS Control Setting 1: Lane 2 */
+#define SDR0_PE1HSSSET2L2	0x0000034D	/* PE1 HSS Control Setting 2: Lane 2 */
+#define SDR0_PE1HSSSTSL2	0x0000034E	/* PE1 HSS Control Status : Lane 2 */
+#define SDR0_PE1HSSSET1L3	0x0000034F	/* PE1 HSS Control Setting 1: Lane 3 */
+#define SDR0_PE1HSSSET2L3	0x00000350	/* PE1 HSS Control Setting 2: Lane 3 */
+#define SDR0_PE1HSSSTSL3	0x00000351	/* PE1 HSS Control Status : Lane 3 */
+#define SDR0_PE1HSSSEREN	0x00000352	/* PE1 Serdes Transmitter Enable */
+#define SDR0_PE1LANEABCD	0x00000353	/* PE1 Lanes ABCD affectation */
+#define SDR0_PE2UTLSET1		0x00000370	/* PE2 Upper transaction layer conf setting */
+#define SDR0_PE2UTLSET2		0x00000371	/* PE2 Upper transaction layer conf setting 2 */
+#define SDR0_PE2DLPSET		0x00000372	/* PE2 Data link & logical physical configuration */
+#define SDR0_PE2LOOP		0x00000373	/* PE2 Loopback interface status */
+#define SDR0_PE2RCSSET		0x00000374	/* PE2 Reset, clock & shutdown setting */
+#define SDR0_PE2RCSSTS		0x00000375	/* PE2 Reset, clock & shutdown status */
+#define SDR0_PE2HSSSET1L0	0x00000376	/* PE2 HSS Control Setting 1: Lane 0 */
+#define SDR0_PE2HSSSET2L0	0x00000377	/* PE2 HSS Control Setting 2: Lane 0 */
+#define SDR0_PE2HSSSTSL0	0x00000378	/* PE2 HSS Control Status : Lane 0 */
+#define SDR0_PE2HSSSET1L1	0x00000379	/* PE2 HSS Control Setting 1: Lane 1 */
+#define SDR0_PE2HSSSET2L1	0x0000037A	/* PE2 HSS Control Setting 2: Lane 1 */
+#define SDR0_PE2HSSSTSL1	0x0000037B	/* PE2 HSS Control Status : Lane 1 */
+#define SDR0_PE2HSSSET1L2	0x0000037C	/* PE2 HSS Control Setting 1: Lane 2 */
+#define SDR0_PE2HSSSET2L2	0x0000037D	/* PE2 HSS Control Setting 2: Lane 2 */
+#define SDR0_PE2HSSSTSL2	0x0000037E	/* PE2 HSS Control Status : Lane 2 */
+#define SDR0_PE2HSSSET1L3	0x0000037F	/* PE2 HSS Control Setting 1: Lane 3 */
+#define SDR0_PE2HSSSET2L3	0x00000380	/* PE2 HSS Control Setting 2: Lane 3 */
+#define SDR0_PE2HSSSTSL3	0x00000381	/* PE2 HSS Control Status : Lane 3 */
+#define SDR0_PE2HSSSEREN	0x00000382	/* PE2 Serdes Transmitter Enable */
+#define SDR0_PE2LANEABCD	0x00000383	/* PE2 Lanes ABCD affectation */
+#define SDR0_PEGPLLSET1		0x000003A0	/* PE Pll LC Tank Setting1 */
+#define SDR0_PEGPLLSET2		0x000003A1	/* PE Pll LC Tank Setting2 */
+#define SDR0_PEGPLLSTS		0x000003A2	/* PE Pll LC Tank Status */
+
+/*----------------------------------------------------------------------------+
+| SDRAM Controller
++----------------------------------------------------------------------------*/
+/*-----------------------------------------------------------------------------+
+| SDRAM DLYCAL Options
++-----------------------------------------------------------------------------*/
+#define SDRAM_DLYCAL_DLCV_MASK		0x000003FC
+#define SDRAM_DLYCAL_DLCV_ENCODE(x)	(((x)<<2) & SDRAM_DLYCAL_DLCV_MASK)
+#define SDRAM_DLYCAL_DLCV_DECODE(x)	(((x) & SDRAM_DLYCAL_DLCV_MASK)>>2)
+
+/*----------------------------------------------------------------------------+
+| Memory queue defines
++----------------------------------------------------------------------------*/
+/* A REVOIR versus RWC  - SG*/
+#define SDRAMQ_DCR_BASE	0x040
+
+#define SDRAM_R0BAS	(SDRAMQ_DCR_BASE+0x0)	/* rank 0 base address & size  */
+#define SDRAM_R1BAS	(SDRAMQ_DCR_BASE+0x1)	/* rank 1 base address & size  */
+#define SDRAM_R2BAS	(SDRAMQ_DCR_BASE+0x2)	/* rank 2 base address & size  */
+#define SDRAM_R3BAS	(SDRAMQ_DCR_BASE+0x3)	/* rank 3 base address & size  */
+#define SDRAM_CONF1HB	(SDRAMQ_DCR_BASE+0x5)	/* configuration 1 HB          */
+#define SDRAM_ERRSTATHB	(SDRAMQ_DCR_BASE+0x7)	/* error status HB             */
+#define SDRAM_ERRADDUHB	(SDRAMQ_DCR_BASE+0x8)	/* error address upper 32 HB   */
+#define SDRAM_ERRADDLHB	(SDRAMQ_DCR_BASE+0x9)	/* error address lower 32 HB   */
+#define SDRAM_PLBADDULL	(SDRAMQ_DCR_BASE+0xA)	/* PLB base address upper 32 LL */
+#define SDRAM_CONF1LL	(SDRAMQ_DCR_BASE+0xB)	/* configuration 1 LL          */
+#define SDRAM_ERRSTATLL	(SDRAMQ_DCR_BASE+0xC)	/* error status LL             */
+#define SDRAM_ERRADDULL	(SDRAMQ_DCR_BASE+0xD)	/* error address upper 32 LL   */
+#define SDRAM_ERRADDLLL	(SDRAMQ_DCR_BASE+0xE)	/* error address lower 32 LL   */
+#define SDRAM_CONFPATHB	(SDRAMQ_DCR_BASE+0xF)	/* configuration between paths */
+#define SDRAM_PLBADDUHB	(SDRAMQ_DCR_BASE+0x10)	/* PLB base address upper 32 LL */
+
+/*-----------------------------------------------------------------------------+
+|  Memory Bank 0-7 configuration
++-----------------------------------------------------------------------------*/
+#define SDRAM_RXBAS_SDBA_MASK		0xFF800000	/* Base address	*/
+#define SDRAM_RXBAS_SDBA_ENCODE(n)	((((unsigned long)(n))&0xFFE00000)>>2)
+#define SDRAM_RXBAS_SDBA_DECODE(n)	((((unsigned long)(n))&0xFFE00000)<<2)
+#define SDRAM_RXBAS_SDSZ_MASK		0x0000FFC0	/* Size		*/
+#define SDRAM_RXBAS_SDSZ_ENCODE(n)	((((unsigned long)(n))&0x3FF)<<6)
+#define SDRAM_RXBAS_SDSZ_DECODE(n)	((((unsigned long)(n))>>6)&0x3FF)
+#define SDRAM_RXBAS_SDSZ_0		0x00000000	/*   0M		*/
+#define SDRAM_RXBAS_SDSZ_8		0x0000FFC0	/*   8M		*/
+#define SDRAM_RXBAS_SDSZ_16		0x0000FF80	/*  16M		*/
+#define SDRAM_RXBAS_SDSZ_32		0x0000FF00	/*  32M		*/
+#define SDRAM_RXBAS_SDSZ_64		0x0000FE00	/*  64M		*/
+#define SDRAM_RXBAS_SDSZ_128		0x0000FC00	/* 128M		*/
+#define SDRAM_RXBAS_SDSZ_256		0x0000F800	/* 256M		*/
+#define SDRAM_RXBAS_SDSZ_512		0x0000F000	/* 512M		*/
+#define SDRAM_RXBAS_SDSZ_1024		0x0000E000	/* 1024M	*/
+#define SDRAM_RXBAS_SDSZ_2048		0x0000C000	/* 2048M	*/
+#define SDRAM_RXBAS_SDSZ_4096		0x00008000	/* 4096M	*/
+
+/*----------------------------------------------------------------------------+
+| Memory controller defines
++----------------------------------------------------------------------------*/
+#define SDRAMC_DCR_BASE	0x010
+#define SDRAMC_CFGADDR	(SDRAMC_DCR_BASE+0x0)   /* Memory configuration add  */
+#define SDRAMC_CFGDATA	(SDRAMC_DCR_BASE+0x1)   /* Memory configuration data */
+
+/* A REVOIR versus specs 4 bank  - SG*/
+#define SDRAM_MCSTAT	0x14	/* memory controller status                  */
+#define SDRAM_MCOPT1	0x20	/* memory controller options 1               */
+#define SDRAM_MCOPT2	0x21	/* memory controller options 2               */
+#define SDRAM_MODT0	0x22	/* on die termination for bank 0             */
+#define SDRAM_MODT1	0x23	/* on die termination for bank 1             */
+#define SDRAM_MODT2	0x24	/* on die termination for bank 2             */
+#define SDRAM_MODT3	0x25	/* on die termination for bank 3             */
+#define SDRAM_CODT	0x26	/* on die termination for controller         */
+#define SDRAM_VVPR	0x27	/* variable VRef programmming                */
+#define SDRAM_OPARS	0x28	/* on chip driver control setup              */
+#define SDRAM_OPART	0x29	/* on chip driver control trigger            */
+#define SDRAM_RTR	0x30	/* refresh timer                             */
+#define SDRAM_PMIT	0x34	/* power management idle timer               */
+#define SDRAM_MB0CF	0x40	/* memory bank 0 configuration               */
+#define SDRAM_MB1CF	0x44	/* memory bank 1 configuration               */
+#define SDRAM_MB2CF	0x48
+#define SDRAM_MB3CF	0x4C
+#define SDRAM_INITPLR0	0x50	/* manual initialization control             */
+#define SDRAM_INITPLR1	0x51	/* manual initialization control             */
+#define SDRAM_INITPLR2	0x52	/* manual initialization control             */
+#define SDRAM_INITPLR3	0x53	/* manual initialization control             */
+#define SDRAM_INITPLR4	0x54	/* manual initialization control             */
+#define SDRAM_INITPLR5	0x55	/* manual initialization control             */
+#define SDRAM_INITPLR6	0x56	/* manual initialization control             */
+#define SDRAM_INITPLR7	0x57	/* manual initialization control             */
+#define SDRAM_INITPLR8	0x58	/* manual initialization control             */
+#define SDRAM_INITPLR9	0x59	/* manual initialization control             */
+#define SDRAM_INITPLR10	0x5a	/* manual initialization control             */
+#define SDRAM_INITPLR11	0x5b	/* manual initialization control             */
+#define SDRAM_INITPLR12	0x5c	/* manual initialization control             */
+#define SDRAM_INITPLR13	0x5d	/* manual initialization control             */
+#define SDRAM_INITPLR14	0x5e	/* manual initialization control             */
+#define SDRAM_INITPLR15	0x5f	/* manual initialization control             */
+#define SDRAM_RQDC	0x70	/* read DQS delay control                    */
+#define SDRAM_RFDC	0x74	/* read feedback delay control               */
+#define SDRAM_RDCC	0x78	/* read data capture control                 */
+#define SDRAM_DLCR	0x7A	/* delay line calibration                    */
+#define SDRAM_CLKTR	0x80	/* DDR clock timing                          */
+#define SDRAM_WRDTR	0x81	/* write data, DQS, DM clock, timing         */
+#define SDRAM_SDTR1	0x85	/* DDR SDRAM timing 1                        */
+#define SDRAM_SDTR2	0x86	/* DDR SDRAM timing 2                        */
+#define SDRAM_SDTR3	0x87	/* DDR SDRAM timing 3                        */
+#define SDRAM_MMODE	0x88	/* memory mode                               */
+#define SDRAM_MEMODE	0x89	/* memory extended mode                      */
+#define SDRAM_ECCCR	0x98	/* ECC error status                          */
+#define SDRAM_CID	0xA4	/* core ID                                   */
+#define SDRAM_RID	0xA8	/* revision ID                               */
+
+/*-----------------------------------------------------------------------------+
+|  Memory Controller Status
++-----------------------------------------------------------------------------*/
+#define SDRAM_MCSTAT_MIC_MASK		0x80000000	/* Memory init status mask	*/
+#define SDRAM_MCSTAT_MIC_NOTCOMP	0x00000000	/* Mem init not complete	*/
+#define SDRAM_MCSTAT_MIC_COMP		0x80000000	/* Mem init complete		*/
+#define SDRAM_MCSTAT_SRMS_MASK		0x80000000	/* Mem self refresh stat mask	*/
+#define SDRAM_MCSTAT_SRMS_NOT_SF	0x00000000	/* Mem not in self refresh	*/
+#define SDRAM_MCSTAT_SRMS_SF		0x80000000	/* Mem in self refresh		*/
+
+/*-----------------------------------------------------------------------------+
+|  Memory Controller Options 1
++-----------------------------------------------------------------------------*/
+#define SDRAM_MCOPT1_MCHK_MASK		0x30000000 /* Memory data err check mask*/
+#define SDRAM_MCOPT1_MCHK_NON		0x00000000 /* No ECC generation		*/
+#define SDRAM_MCOPT1_MCHK_GEN		0x20000000 /* ECC generation		*/
+#define SDRAM_MCOPT1_MCHK_CHK		0x10000000 /* ECC generation and check	*/
+#define SDRAM_MCOPT1_MCHK_CHK_REP	0x30000000 /* ECC generation, chk, report*/
+#define SDRAM_MCOPT1_MCHK_CHK_DECODE(n)	((((unsigned long)(n))>>28)&0x3)
+#define SDRAM_MCOPT1_RDEN_MASK		0x08000000 /* Registered DIMM mask	*/
+#define SDRAM_MCOPT1_RDEN		0x08000000 /* Registered DIMM enable	*/
+#define SDRAM_MCOPT1_PMU_MASK		0x06000000 /* Page management unit mask	*/
+#define SDRAM_MCOPT1_PMU_CLOSE		0x00000000 /* PMU Close			*/
+#define SDRAM_MCOPT1_PMU_OPEN		0x04000000 /* PMU Open			*/
+#define SDRAM_MCOPT1_PMU_AUTOCLOSE	0x02000000 /* PMU AutoClose		*/
+#define SDRAM_MCOPT1_DMWD_MASK		0x01000000 /* DRAM width mask		*/
+#define SDRAM_MCOPT1_DMWD_32		0x00000000 /* 32 bits			*/
+#define SDRAM_MCOPT1_DMWD_64		0x01000000 /* 64 bits			*/
+#define SDRAM_MCOPT1_UIOS_MASK		0x00C00000 /* Unused IO State		*/
+#define SDRAM_MCOPT1_BCNT_MASK		0x00200000 /* Bank count		*/
+#define SDRAM_MCOPT1_4_BANKS		0x00000000 /* 4 Banks			*/
+#define SDRAM_MCOPT1_8_BANKS		0x00200000 /* 8 Banks			*/
+#define SDRAM_MCOPT1_DDR_TYPE_MASK	0x00100000 /* DDR Memory Type mask	*/
+#define SDRAM_MCOPT1_DDR1_TYPE		0x00000000 /* DDR1 Memory Type		*/
+#define SDRAM_MCOPT1_DDR2_TYPE		0x00100000 /* DDR2 Memory Type		*/
+#define SDRAM_MCOPT1_QDEP		0x00020000 /* 4 commands deep		*/
+#define SDRAM_MCOPT1_RWOO_MASK		0x00008000 /* Out of Order Read mask	*/
+#define SDRAM_MCOPT1_RWOO_DISABLED	0x00000000 /* disabled			*/
+#define SDRAM_MCOPT1_RWOO_ENABLED	0x00008000 /* enabled			*/
+#define SDRAM_MCOPT1_WOOO_MASK		0x00004000 /* Out of Order Write mask	*/
+#define SDRAM_MCOPT1_WOOO_DISABLED	0x00000000 /* disabled			*/
+#define SDRAM_MCOPT1_WOOO_ENABLED	0x00004000 /* enabled			*/
+#define SDRAM_MCOPT1_DCOO_MASK		0x00002000 /* All Out of Order mask	*/
+#define SDRAM_MCOPT1_DCOO_DISABLED	0x00002000 /* disabled			*/
+#define SDRAM_MCOPT1_DCOO_ENABLED	0x00000000 /* enabled			*/
+#define SDRAM_MCOPT1_DREF_MASK		0x00001000 /* Deferred refresh mask	*/
+#define SDRAM_MCOPT1_DREF_NORMAL	0x00000000 /* normal refresh		*/
+#define SDRAM_MCOPT1_DREF_DEFER_4	0x00001000 /* defer up to 4 refresh cmd	*/
+
+/*-----------------------------------------------------------------------------+
+|  Memory Controller Options 2
++-----------------------------------------------------------------------------*/
+#define SDRAM_MCOPT2_SREN_MASK		0x80000000 /* Self Test mask		*/
+#define SDRAM_MCOPT2_SREN_EXIT		0x00000000 /* Self Test exit		*/
+#define SDRAM_MCOPT2_SREN_ENTER		0x80000000 /* Self Test enter		*/
+#define SDRAM_MCOPT2_PMEN_MASK		0x40000000 /* Power Management mask	*/
+#define SDRAM_MCOPT2_PMEN_DISABLE	0x00000000 /* disable			*/
+#define SDRAM_MCOPT2_PMEN_ENABLE	0x40000000 /* enable			*/
+#define SDRAM_MCOPT2_IPTR_MASK		0x20000000 /* Init Trigger Reg mask	*/
+#define SDRAM_MCOPT2_IPTR_IDLE		0x00000000 /* idle			*/
+#define SDRAM_MCOPT2_IPTR_EXECUTE	0x20000000 /* execute preloaded init	*/
+#define SDRAM_MCOPT2_XSRP_MASK		0x10000000 /* Exit Self Refresh Prevent	*/
+#define SDRAM_MCOPT2_XSRP_ALLOW		0x00000000 /* allow self refresh exit	*/
+#define SDRAM_MCOPT2_XSRP_PREVENT	0x10000000 /* prevent self refresh exit	*/
+#define SDRAM_MCOPT2_DCEN_MASK		0x08000000 /* SDRAM Controller Enable	*/
+#define SDRAM_MCOPT2_DCEN_DISABLE	0x00000000 /* SDRAM Controller Enable	*/
+#define SDRAM_MCOPT2_DCEN_ENABLE	0x08000000 /* SDRAM Controller Enable	*/
+#define SDRAM_MCOPT2_ISIE_MASK		0x04000000 /* Init Seq Interruptable mas*/
+#define SDRAM_MCOPT2_ISIE_DISABLE	0x00000000 /* disable			*/
+#define SDRAM_MCOPT2_ISIE_ENABLE	0x04000000 /* enable			*/
+
+/*-----------------------------------------------------------------------------+
+|  SDRAM Refresh Timer Register
++-----------------------------------------------------------------------------*/
+#define SDRAM_RTR_RINT_MASK		0xFFF80000
+#define SDRAM_RTR_RINT_ENCODE(n)	((((unsigned long)(n))&0xFFF8)<<16)
+#define SDRAM_RTR_RINT_DECODE(n)	((((unsigned long)(n))>>16)&0xFFF8)
+
+/*-----------------------------------------------------------------------------+
+|  SDRAM Read DQS Delay Control Register
++-----------------------------------------------------------------------------*/
+#define SDRAM_RQDC_RQDE_MASK		0x80000000
+#define SDRAM_RQDC_RQDE_DISABLE		0x00000000
+#define SDRAM_RQDC_RQDE_ENABLE		0x80000000
+#define SDRAM_RQDC_RQFD_MASK		0x000001FF
+#define SDRAM_RQDC_RQFD_ENCODE(n)	((((unsigned long)(n))&0x1FF)<<0)
+
+#define SDRAM_RQDC_RQFD_MAX		0x1FF
+
+/*-----------------------------------------------------------------------------+
+|  SDRAM Read Data Capture Control Register
++-----------------------------------------------------------------------------*/
+#define SDRAM_RDCC_RDSS_MASK		0xC0000000
+#define SDRAM_RDCC_RDSS_T1		0x00000000
+#define SDRAM_RDCC_RDSS_T2		0x40000000
+#define SDRAM_RDCC_RDSS_T3		0x80000000
+#define SDRAM_RDCC_RDSS_T4		0xC0000000
+#define SDRAM_RDCC_RSAE_MASK		0x00000001
+#define SDRAM_RDCC_RSAE_DISABLE		0x00000001
+#define SDRAM_RDCC_RSAE_ENABLE		0x00000000
+
+/*-----------------------------------------------------------------------------+
+|  SDRAM Read Feedback Delay Control Register
++-----------------------------------------------------------------------------*/
+#define SDRAM_RFDC_ARSE_MASK		0x80000000
+#define SDRAM_RFDC_ARSE_DISABLE		0x80000000
+#define SDRAM_RFDC_ARSE_ENABLE		0x00000000
+#define SDRAM_RFDC_RFOS_MASK		0x007F0000
+#define SDRAM_RFDC_RFOS_ENCODE(n)	((((unsigned long)(n))&0x7F)<<16)
+#define SDRAM_RFDC_RFFD_MASK		0x000003FF
+#define SDRAM_RFDC_RFFD_ENCODE(n)	((((unsigned long)(n))&0x3FF)<<0)
+
+#define SDRAM_RFDC_RFFD_MAX		0x7FF
+
+/*-----------------------------------------------------------------------------+
+|  SDRAM Delay Line Calibration Register
++-----------------------------------------------------------------------------*/
+#define SDRAM_DLCR_DCLM_MASK		0x80000000
+#define SDRAM_DLCR_DCLM_MANUEL		0x80000000
+#define SDRAM_DLCR_DCLM_AUTO		0x00000000
+#define SDRAM_DLCR_DLCR_MASK		0x08000000
+#define SDRAM_DLCR_DLCR_CALIBRATE	0x08000000
+#define SDRAM_DLCR_DLCR_IDLE		0x00000000
+#define SDRAM_DLCR_DLCS_MASK		0x07000000
+#define SDRAM_DLCR_DLCS_NOT_RUN		0x00000000
+#define SDRAM_DLCR_DLCS_IN_PROGRESS	0x01000000
+#define SDRAM_DLCR_DLCS_COMPLETE	0x02000000
+#define SDRAM_DLCR_DLCS_CONT_DONE	0x03000000
+#define SDRAM_DLCR_DLCS_ERROR		0x04000000
+#define SDRAM_DLCR_DLCV_MASK		0x000001FF
+#define SDRAM_DLCR_DLCV_ENCODE(n)	((((unsigned long)(n))&0x1FF)<<0)
+#define SDRAM_DLCR_DLCV_DECODE(n)	((((unsigned long)(n))>>0)&0x1FF)
+
+/*-----------------------------------------------------------------------------+
+|  SDRAM Controller On Die Termination Register
++-----------------------------------------------------------------------------*/
+#define SDRAM_CODT_ODT_ON			0x80000000
+#define SDRAM_CODT_ODT_OFF			0x00000000
+#define SDRAM_CODT_DQS_VOLTAGE_DDR_MASK		0x00000020
+#define SDRAM_CODT_DQS_2_5_V_DDR1		0x00000000
+#define SDRAM_CODT_DQS_1_8_V_DDR2		0x00000020
+#define SDRAM_CODT_DQS_MASK			0x00000010
+#define SDRAM_CODT_DQS_DIFFERENTIAL		0x00000000
+#define SDRAM_CODT_DQS_SINGLE_END		0x00000010
+#define SDRAM_CODT_CKSE_DIFFERENTIAL		0x00000000
+#define SDRAM_CODT_CKSE_SINGLE_END		0x00000008
+#define SDRAM_CODT_FEEBBACK_RCV_SINGLE_END	0x00000004
+#define SDRAM_CODT_FEEBBACK_DRV_SINGLE_END	0x00000002
+#define SDRAM_CODT_IO_HIZ  			0x00000000
+#define SDRAM_CODT_IO_NMODE  			0x00000001
+
+/*-----------------------------------------------------------------------------+
+|  SDRAM Mode Register
++-----------------------------------------------------------------------------*/
+#define SDRAM_MMODE_WR_MASK		0x00000E00
+#define SDRAM_MMODE_WR_DDR1		0x00000000
+#define SDRAM_MMODE_WR_DDR2_3_CYC	0x00000400
+#define SDRAM_MMODE_WR_DDR2_4_CYC	0x00000600
+#define SDRAM_MMODE_WR_DDR2_5_CYC	0x00000800
+#define SDRAM_MMODE_WR_DDR2_6_CYC	0x00000A00
+#define SDRAM_MMODE_DCL_MASK		0x00000070
+#define SDRAM_MMODE_DCL_DDR1_2_0_CLK	0x00000020
+#define SDRAM_MMODE_DCL_DDR1_2_5_CLK	0x00000060
+#define SDRAM_MMODE_DCL_DDR1_3_0_CLK	0x00000030
+#define SDRAM_MMODE_DCL_DDR2_2_0_CLK	0x00000020
+#define SDRAM_MMODE_DCL_DDR2_3_0_CLK	0x00000030
+#define SDRAM_MMODE_DCL_DDR2_4_0_CLK	0x00000040
+#define SDRAM_MMODE_DCL_DDR2_5_0_CLK	0x00000050
+#define SDRAM_MMODE_DCL_DDR2_6_0_CLK	0x00000060
+#define SDRAM_MMODE_DCL_DDR2_7_0_CLK	0x00000070
+
+/*-----------------------------------------------------------------------------+
+|  SDRAM Extended Mode Register
++-----------------------------------------------------------------------------*/
+#define SDRAM_MEMODE_DIC_MASK		0x00000002
+#define SDRAM_MEMODE_DIC_NORMAL		0x00000000
+#define SDRAM_MEMODE_DIC_WEAK		0x00000002
+#define SDRAM_MEMODE_DLL_MASK		0x00000001
+#define SDRAM_MEMODE_DLL_DISABLE	0x00000001
+#define SDRAM_MEMODE_DLL_ENABLE		0x00000000
+#define SDRAM_MEMODE_RTT_MASK		0x00000044
+#define SDRAM_MEMODE_RTT_DISABLED	0x00000000
+#define SDRAM_MEMODE_RTT_75OHM		0x00000004
+#define SDRAM_MEMODE_RTT_150OHM		0x00000040
+#define SDRAM_MEMODE_DQS_MASK		0x00000400
+#define SDRAM_MEMODE_DQS_DISABLE	0x00000400
+#define SDRAM_MEMODE_DQS_ENABLE		0x00000000
+
+/*-----------------------------------------------------------------------------+
+|  SDRAM Clock Timing Register
++-----------------------------------------------------------------------------*/
+#define SDRAM_CLKTR_CLKP_MASK		0xC0000000
+#define SDRAM_CLKTR_CLKP_0_DEG		0x00000000
+#define SDRAM_CLKTR_CLKP_180_DEG_ADV	0x80000000
+
+/*-----------------------------------------------------------------------------+
+|  SDRAM Write Timing Register
++-----------------------------------------------------------------------------*/
+#define SDRAM_WRDTR_LLWP_MASK		0x10000000
+#define SDRAM_WRDTR_LLWP_DIS		0x10000000
+#define SDRAM_WRDTR_LLWP_1_CYC		0x00000000
+#define SDRAM_WRDTR_WTR_MASK		0x0E000000
+#define SDRAM_WRDTR_WTR_0_DEG		0x06000000
+#define SDRAM_WRDTR_WTR_180_DEG_ADV	0x02000000
+#define SDRAM_WRDTR_WTR_270_DEG_ADV	0x00000000
+
+/*-----------------------------------------------------------------------------+
+|  SDRAM SDTR1 Options
++-----------------------------------------------------------------------------*/
+#define SDRAM_SDTR1_LDOF_MASK		0x80000000
+#define SDRAM_SDTR1_LDOF_1_CLK		0x00000000
+#define SDRAM_SDTR1_LDOF_2_CLK		0x80000000
+#define SDRAM_SDTR1_RTW_MASK		0x00F00000
+#define SDRAM_SDTR1_RTW_2_CLK		0x00200000
+#define SDRAM_SDTR1_RTW_3_CLK		0x00300000
+#define SDRAM_SDTR1_WTWO_MASK		0x000F0000
+#define SDRAM_SDTR1_WTWO_0_CLK		0x00000000
+#define SDRAM_SDTR1_WTWO_1_CLK		0x00010000
+#define SDRAM_SDTR1_RTRO_MASK		0x0000F000
+#define SDRAM_SDTR1_RTRO_1_CLK		0x00001000
+#define SDRAM_SDTR1_RTRO_2_CLK		0x00002000
+
+/*-----------------------------------------------------------------------------+
+|  SDRAM SDTR2 Options
++-----------------------------------------------------------------------------*/
+#define SDRAM_SDTR2_RCD_MASK		0xF0000000
+#define SDRAM_SDTR2_RCD_1_CLK		0x10000000
+#define SDRAM_SDTR2_RCD_2_CLK		0x20000000
+#define SDRAM_SDTR2_RCD_3_CLK		0x30000000
+#define SDRAM_SDTR2_RCD_4_CLK		0x40000000
+#define SDRAM_SDTR2_RCD_5_CLK		0x50000000
+#define SDRAM_SDTR2_WTR_MASK		0x0F000000
+#define SDRAM_SDTR2_WTR_1_CLK		0x01000000
+#define SDRAM_SDTR2_WTR_2_CLK		0x02000000
+#define SDRAM_SDTR2_WTR_3_CLK		0x03000000
+#define SDRAM_SDTR2_WTR_4_CLK		0x04000000
+#define SDRAM_SDTR3_WTR_ENCODE(n)	((((unsigned long)(n))&0xF)<<24)
+#define SDRAM_SDTR2_XSNR_MASK		0x00FF0000
+#define SDRAM_SDTR2_XSNR_8_CLK		0x00080000
+#define SDRAM_SDTR2_XSNR_16_CLK		0x00100000
+#define SDRAM_SDTR2_XSNR_32_CLK		0x00200000
+#define SDRAM_SDTR2_XSNR_64_CLK		0x00400000
+#define SDRAM_SDTR2_WPC_MASK		0x0000F000
+#define SDRAM_SDTR2_WPC_2_CLK		0x00002000
+#define SDRAM_SDTR2_WPC_3_CLK		0x00003000
+#define SDRAM_SDTR2_WPC_4_CLK		0x00004000
+#define SDRAM_SDTR2_WPC_5_CLK		0x00005000
+#define SDRAM_SDTR2_WPC_6_CLK		0x00006000
+#define SDRAM_SDTR3_WPC_ENCODE(n)	((((unsigned long)(n))&0xF)<<12)
+#define SDRAM_SDTR2_RPC_MASK		0x00000F00
+#define SDRAM_SDTR2_RPC_2_CLK		0x00000200
+#define SDRAM_SDTR2_RPC_3_CLK		0x00000300
+#define SDRAM_SDTR2_RPC_4_CLK		0x00000400
+#define SDRAM_SDTR2_RP_MASK		0x000000F0
+#define SDRAM_SDTR2_RP_3_CLK		0x00000030
+#define SDRAM_SDTR2_RP_4_CLK		0x00000040
+#define SDRAM_SDTR2_RP_5_CLK		0x00000050
+#define SDRAM_SDTR2_RP_6_CLK		0x00000060
+#define SDRAM_SDTR2_RP_7_CLK		0x00000070
+#define SDRAM_SDTR2_RRD_MASK		0x0000000F
+#define SDRAM_SDTR2_RRD_2_CLK		0x00000002
+#define SDRAM_SDTR2_RRD_3_CLK		0x00000003
+
+/*-----------------------------------------------------------------------------+
+|  SDRAM SDTR3 Options
++-----------------------------------------------------------------------------*/
+#define SDRAM_SDTR3_RAS_MASK		0x1F000000
+#define SDRAM_SDTR3_RAS_ENCODE(n)	((((unsigned long)(n))&0x1F)<<24)
+#define SDRAM_SDTR3_RC_MASK		0x001F0000
+#define SDRAM_SDTR3_RC_ENCODE(n)	((((unsigned long)(n))&0x1F)<<16)
+#define SDRAM_SDTR3_XCS_MASK		0x00001F00
+#define SDRAM_SDTR3_XCS			0x00000D00
+#define SDRAM_SDTR3_RFC_MASK		0x0000003F
+#define SDRAM_SDTR3_RFC_ENCODE(n)	((((unsigned long)(n))&0x3F)<<0)
+
+/*-----------------------------------------------------------------------------+
+|  Memory Bank 0-1 configuration
++-----------------------------------------------------------------------------*/
+#define SDRAM_BXCF_M_AM_MASK		0x00000F00	/* Addressing mode	*/
+#define SDRAM_BXCF_M_AM_0		0x00000000	/*   Mode 0		*/
+#define SDRAM_BXCF_M_AM_1		0x00000100	/*   Mode 1		*/
+#define SDRAM_BXCF_M_AM_2		0x00000200	/*   Mode 2		*/
+#define SDRAM_BXCF_M_AM_3		0x00000300	/*   Mode 3		*/
+#define SDRAM_BXCF_M_AM_4		0x00000400	/*   Mode 4		*/
+#define SDRAM_BXCF_M_AM_5		0x00000500	/*   Mode 5		*/
+#define SDRAM_BXCF_M_AM_6		0x00000600	/*   Mode 6		*/
+#define SDRAM_BXCF_M_AM_7		0x00000700	/*   Mode 7		*/
+#define SDRAM_BXCF_M_AM_8		0x00000800	/*   Mode 8		*/
+#define SDRAM_BXCF_M_AM_9		0x00000900	/*   Mode 9		*/
+#define SDRAM_BXCF_M_BE_MASK		0x00000001	/* Memory Bank Enable	*/
+#define SDRAM_BXCF_M_BE_DISABLE		0x00000000	/* Memory Bank Enable	*/
+#define SDRAM_BXCF_M_BE_ENABLE		0x00000001	/* Memory Bank Enable	*/
+#endif /* CONFIG_440SPE */
+
 /*-----------------------------------------------------------------------------
  | External Bus Controller
  +----------------------------------------------------------------------------*/
@@ -503,7 +1050,7 @@
 /*-----------------------------------------------------------------------------
  | L2 Cache
  +----------------------------------------------------------------------------*/
-#if defined (CONFIG_440GX) || defined(CONFIG_440SP)
+#if defined (CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
 #define L2_CACHE_BASE	0x030
 #define l2_cache_cfg	(L2_CACHE_BASE+0x00)	/* L2 Cache Config	*/
 #define l2_cache_cmd	(L2_CACHE_BASE+0x01)	/* L2 Cache Command	*/
@@ -526,7 +1073,7 @@
  | Clocking, Power Management and Chip Control
  +----------------------------------------------------------------------------*/
 #define CNTRL_DCR_BASE 0x0b0
-#if defined(CONFIG_440GX) || defined(CONFIG_440SP)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
 #define cpc0_er		(CNTRL_DCR_BASE+0x00)	/* CPM enable register		*/
 #define cpc0_fr		(CNTRL_DCR_BASE+0x01)	/* CPM force register		*/
 #define cpc0_sr		(CNTRL_DCR_BASE+0x02)	/* CPM status register		*/
@@ -574,6 +1121,30 @@
 #define uic1vr	(UIC1_DCR_BASE+0x7)   /* UIC1 vector			   */
 #define uic1vcr (UIC1_DCR_BASE+0x8)   /* UIC1 vector configuration	   */
 
+#if defined(CONFIG_440SPE)
+#define UIC2_DCR_BASE 0xe0
+#define uic2sr	(UIC0_DCR_BASE+0x0)   /* UIC2 status-Read Clear		*/
+#define uic2srs	(UIC0_DCR_BASE+0x1)   /* UIC2 status-Read Set */
+#define uic2er	(UIC0_DCR_BASE+0x2)   /* UIC2 enable			*/
+#define uic2cr	(UIC0_DCR_BASE+0x3)   /* UIC2 critical			*/
+#define uic2pr	(UIC0_DCR_BASE+0x4)   /* UIC2 polarity			*/
+#define uic2tr	(UIC0_DCR_BASE+0x5)   /* UIC2 triggering		*/
+#define uic2msr (UIC0_DCR_BASE+0x6)   /* UIC2 masked status		*/
+#define uic2vr	(UIC0_DCR_BASE+0x7)   /* UIC2 vector			*/
+#define uic2vcr (UIC0_DCR_BASE+0x8)   /* UIC2 vector configuration	*/
+
+#define UIC3_DCR_BASE 0xf0
+#define uic3sr	(UIC1_DCR_BASE+0x0)   /* UIC3 status-Read Clear		*/
+#define uic3srs	(UIC0_DCR_BASE+0x1)   /* UIC3 status-Read Set */
+#define uic3er	(UIC1_DCR_BASE+0x2)   /* UIC3 enable			*/
+#define uic3cr	(UIC1_DCR_BASE+0x3)   /* UIC3 critical			*/
+#define uic3pr	(UIC1_DCR_BASE+0x4)   /* UIC3 polarity			*/
+#define uic3tr	(UIC1_DCR_BASE+0x5)   /* UIC3 triggering		*/
+#define uic3msr (UIC1_DCR_BASE+0x6)   /* UIC3 masked status		*/
+#define uic3vr	(UIC1_DCR_BASE+0x7)   /* UIC3 vector			*/
+#define uic3vcr (UIC1_DCR_BASE+0x8)   /* UIC3 vector configuration	*/
+#endif /* CONFIG_440SPE */
+
 #if defined(CONFIG_440GX)
 #define UIC2_DCR_BASE 0x210
 #define uic2sr	(UIC2_DCR_BASE+0x0)   /* UIC2 status			   */
@@ -607,6 +1178,103 @@
 #define uicvr  uic0vr
 #define uicvcr uic0vcr
 
+#if defined(CONFIG_440SPE)
+/*----------------------------------------------------------------------------+
+| Clock / Power-on-reset DCR's.
++----------------------------------------------------------------------------*/
+#define CPR0_CFGADDR			0x00C
+#define CPR0_CFGDATA			0x00D
+
+#define CPR0_CLKUPD			0x20
+#define CPR0_CLKUPD_BSY_MASK		0x80000000
+#define CPR0_CLKUPD_BSY_COMPLETED	0x00000000
+#define CPR0_CLKUPD_BSY_BUSY		0x80000000
+#define CPR0_CLKUPD_CUI_MASK		0x80000000
+#define CPR0_CLKUPD_CUI_DISABLE		0x00000000
+#define CPR0_CLKUPD_CUI_ENABLE		0x80000000
+#define CPR0_CLKUPD_CUD_MASK		0x40000000
+#define CPR0_CLKUPD_CUD_DISABLE		0x00000000
+#define CPR0_CLKUPD_CUD_ENABLE		0x40000000
+
+#define CPR0_PLLC			0x40
+#define CPR0_PLLC_RST_MASK		0x80000000
+#define CPR0_PLLC_RST_PLLLOCKED		0x00000000
+#define CPR0_PLLC_RST_PLLRESET		0x80000000
+#define CPR0_PLLC_ENG_MASK		0x40000000
+#define CPR0_PLLC_ENG_DISABLE		0x00000000
+#define CPR0_PLLC_ENG_ENABLE		0x40000000
+#define CPR0_PLLC_ENG_ENCODE(n)		((((unsigned long)(n))&0x01)<<30)
+#define CPR0_PLLC_ENG_DECODE(n)		((((unsigned long)(n))>>30)&0x01)
+#define CPR0_PLLC_SRC_MASK		0x20000000
+#define CPR0_PLLC_SRC_PLLOUTA		0x00000000
+#define CPR0_PLLC_SRC_PLLOUTB		0x20000000
+#define CPR0_PLLC_SRC_ENCODE(n)		((((unsigned long)(n))&0x01)<<29)
+#define CPR0_PLLC_SRC_DECODE(n)		((((unsigned long)(n))>>29)&0x01)
+#define CPR0_PLLC_SEL_MASK		0x07000000
+#define CPR0_PLLC_SEL_PLLOUT		0x00000000
+#define CPR0_PLLC_SEL_CPU		0x01000000
+#define CPR0_PLLC_SEL_EBC		0x05000000
+#define CPR0_PLLC_SEL_ENCODE(n)		((((unsigned long)(n))&0x07)<<24)
+#define CPR0_PLLC_SEL_DECODE(n)		((((unsigned long)(n))>>24)&0x07)
+#define CPR0_PLLC_TUNE_MASK		0x000003FF
+#define CPR0_PLLC_TUNE_ENCODE(n)	((((unsigned long)(n))&0x3FF)<<0)
+#define CPR0_PLLC_TUNE_DECODE(n)	((((unsigned long)(n))>>0)&0x3FF)
+
+#define CPR0_PLLD			0x60
+#define CPR0_PLLD_FBDV_MASK		0x1F000000
+#define CPR0_PLLD_FBDV_ENCODE(n)	((((unsigned long)(n))&0x1F)<<24)
+#define CPR0_PLLD_FBDV_DECODE(n)	((((((unsigned long)(n))>>24)-1)&0x1F)+1)
+#define CPR0_PLLD_FWDVA_MASK		0x000F0000
+#define CPR0_PLLD_FWDVA_ENCODE(n)	((((unsigned long)(n))&0x0F)<<16)
+#define CPR0_PLLD_FWDVA_DECODE(n)	((((((unsigned long)(n))>>16)-1)&0x0F)+1)
+#define CPR0_PLLD_FWDVB_MASK		0x00000700
+#define CPR0_PLLD_FWDVB_ENCODE(n)	((((unsigned long)(n))&0x07)<<8)
+#define CPR0_PLLD_FWDVB_DECODE(n)	((((((unsigned long)(n))>>8)-1)&0x07)+1)
+#define CPR0_PLLD_LFBDV_MASK		0x0000003F
+#define CPR0_PLLD_LFBDV_ENCODE(n)	((((unsigned long)(n))&0x3F)<<0)
+#define CPR0_PLLD_LFBDV_DECODE(n)	((((((unsigned long)(n))>>0)-1)&0x3F)+1)
+
+#define CPR0_PRIMAD			0x80
+#define CPR0_PRIMAD_PRADV0_MASK		0x07000000
+#define CPR0_PRIMAD_PRADV0_ENCODE(n)	((((unsigned long)(n))&0x07)<<24)
+#define CPR0_PRIMAD_PRADV0_DECODE(n)	((((((unsigned long)(n))>>24)-1)&0x07)+1)
+
+#define CPR0_PRIMBD			0xA0
+#define CPR0_PRIMBD_PRBDV0_MASK		0x07000000
+#define CPR0_PRIMBD_PRBDV0_ENCODE(n)	((((unsigned long)(n))&0x07)<<24)
+#define CPR0_PRIMBD_PRBDV0_DECODE(n)	((((((unsigned long)(n))>>24)-1)&0x07)+1)
+
+#define CPR0_OPBD			0xC0
+#define CPR0_OPBD_OPBDV0_MASK		0x03000000
+#define CPR0_OPBD_OPBDV0_ENCODE(n)	((((unsigned long)(n))&0x03)<<24)
+#define CPR0_OPBD_OPBDV0_DECODE(n)	((((((unsigned long)(n))>>24)-1)&0x03)+1)
+
+#define CPR0_PERD			0xE0
+#define CPR0_PERD_PERDV0_MASK		0x03000000
+#define CPR0_PERD_PERDV0_ENCODE(n)	((((unsigned long)(n))&0x03)<<24)
+#define CPR0_PERD_PERDV0_DECODE(n)	((((((unsigned long)(n))>>24)-1)&0x03)+1)
+
+#define CPR0_MALD			0x100
+#define CPR0_MALD_MALDV0_MASK		0x03000000
+#define CPR0_MALD_MALDV0_ENCODE(n)	((((unsigned long)(n))&0x03)<<24)
+#define CPR0_MALD_MALDV0_DECODE(n)	((((((unsigned long)(n))>>24)-1)&0x03)+1)
+
+#define CPR0_ICFG			0x140
+#define CPR0_ICFG_RLI_MASK		0x80000000
+#define CPR0_ICFG_RLI_RESETCPR		0x00000000
+#define CPR0_ICFG_RLI_PRESERVECPR	0x80000000
+#define CPR0_ICFG_ICS_MASK		0x00000007
+#define CPR0_ICFG_ICS_ENCODE(n)		((((unsigned long)(n))&0x3F)<<0)
+#define CPR0_ICFG_ICS_DECODE(n)		((((((unsigned long)(n))>>0)-1)&0x3F)+1)
+
+/************************/
+/* IIC defines          */
+/************************/
+#define IIC0_MMIO_BASE 0xA0000400
+#define IIC1_MMIO_BASE 0xA0000500
+
+#endif /* CONFIG_440SP */
+
 /*-----------------------------------------------------------------------------
  | DMA
  +----------------------------------------------------------------------------*/
@@ -722,7 +1390,7 @@
 #define UIC_GPTCT	0x00000004	/* GPT count timer		    */
 #define UIC_UIC1NC	0x00000002	/* UIC1 non-critical interrupt	    */
 #define UIC_UIC1C	0x00000001	/* UIC1 critical interrupt	    */
-#else  /* CONFIG_440SP */
+#elif defined(CONFIG_440GX) || defined(CONFIG_440EP)
 #define UIC_U0		0x80000000	/* UART 0			    */
 #define UIC_U1		0x40000000	/* UART 1			    */
 #define UIC_IIC0	0x20000000	/* IIC				    */
@@ -755,7 +1423,40 @@
 #define UIC_EIR6	0x00000004	/* External interrupt 6		    */
 #define UIC_UIC1NC	0x00000002	/* UIC1 non-critical interrupt	    */
 #define UIC_UIC1C	0x00000001	/* UIC1 critical interrupt	    */
-#endif /* CONFIG_440SP */
+#elif !defined(CONFIG_440SPE)
+#define UIC_U0		0x80000000	/* UART 0			    */
+#define UIC_U1		0x40000000	/* UART 1			    */
+#define UIC_IIC0	0x20000000	/* IIC				    */
+#define UIC_IIC1	0x10000000	/* IIC				    */
+#define UIC_PIM		0x08000000	/* PCI inbound message		    */
+#define UIC_PCRW	0x04000000	/* PCI command register write	    */
+#define UIC_PPM		0x02000000	/* PCI power management		    */
+#define UIC_MSI0	0x01000000	/* PCI MSI level 0		    */
+#define UIC_MSI1	0x00800000	/* PCI MSI level 1		    */
+#define UIC_MSI2	0x00400000	/* PCI MSI level 2		    */
+#define UIC_MTE		0x00200000	/* MAL TXEOB			    */
+#define UIC_MRE		0x00100000	/* MAL RXEOB			    */
+#define UIC_D0		0x00080000	/* DMA channel 0		    */
+#define UIC_D1		0x00040000	/* DMA channel 1		    */
+#define UIC_D2		0x00020000	/* DMA channel 2		    */
+#define UIC_D3		0x00010000	/* DMA channel 3		    */
+#define UIC_RSVD0	0x00008000	/* Reserved			    */
+#define UIC_RSVD1	0x00004000	/* Reserved			    */
+#define UIC_CT0		0x00002000	/* GPT compare timer 0		    */
+#define UIC_CT1		0x00001000	/* GPT compare timer 1		    */
+#define UIC_CT2		0x00000800	/* GPT compare timer 2		    */
+#define UIC_CT3		0x00000400	/* GPT compare timer 3		    */
+#define UIC_CT4		0x00000200	/* GPT compare timer 4		    */
+#define UIC_EIR0	0x00000100	/* External interrupt 0		    */
+#define UIC_EIR1	0x00000080	/* External interrupt 1		    */
+#define UIC_EIR2	0x00000040	/* External interrupt 2		    */
+#define UIC_EIR3	0x00000020	/* External interrupt 3		    */
+#define UIC_EIR4	0x00000010	/* External interrupt 4		    */
+#define UIC_EIR5	0x00000008	/* External interrupt 5		    */
+#define UIC_EIR6	0x00000004	/* External interrupt 6		    */
+#define UIC_UIC1NC	0x00000002	/* UIC1 non-critical interrupt	    */
+#define UIC_UIC1C	0x00000001	/* UIC1 critical interrupt	    */
+#endif /* CONFIG_440GX */
 
 /* For compatibility with 405 code */
 #define UIC_MAL_TXEOB	UIC_MTE
@@ -797,7 +1498,40 @@
 #define UIC_EWU0	0x00000004	/* Ethernet 0 wakeup		    */
 #define UIC_ETH1	0x00000002	/* Reserved			    */
 #define UIC_XOR		0x00000001	/* XOR				    */
-#else /* CONFIG_440SP */
+#elif defined(CONFIG_440GX) || defined(CONFIG_440EP)
+#define UIC_MS		0x80000000	/* MAL SERR			    */
+#define UIC_MTDE	0x40000000	/* MAL TXDE			    */
+#define UIC_MRDE	0x20000000	/* MAL RXDE			    */
+#define UIC_DEUE	0x10000000	/* DDR SDRAM ECC uncorrectible error*/
+#define UIC_DECE	0x08000000	/* DDR SDRAM correctible error	    */
+#define UIC_EBCO	0x04000000	/* EBCO interrupt status	    */
+#define UIC_EBMI	0x02000000	/* EBMI interrupt status	    */
+#define UIC_OPB		0x01000000	/* OPB to PLB bridge interrupt stat */
+#define UIC_MSI3	0x00800000	/* PCI MSI level 3		    */
+#define UIC_MSI4	0x00400000	/* PCI MSI level 4		    */
+#define UIC_MSI5	0x00200000	/* PCI MSI level 5		    */
+#define UIC_MSI6	0x00100000	/* PCI MSI level 6		    */
+#define UIC_MSI7	0x00080000	/* PCI MSI level 7		    */
+#define UIC_MSI8	0x00040000	/* PCI MSI level 8		    */
+#define UIC_MSI9	0x00020000	/* PCI MSI level 9		    */
+#define UIC_MSI10	0x00010000	/* PCI MSI level 10		    */
+#define UIC_MSI11	0x00008000	/* PCI MSI level 11		    */
+#define UIC_PPMI	0x00004000	/* PPM interrupt status		    */
+#define UIC_EIR7	0x00002000	/* External interrupt 7		    */
+#define UIC_EIR8	0x00001000	/* External interrupt 8		    */
+#define UIC_EIR9	0x00000800	/* External interrupt 9		    */
+#define UIC_EIR10	0x00000400	/* External interrupt 10	    */
+#define UIC_EIR11	0x00000200	/* External interrupt 11	    */
+#define UIC_EIR12	0x00000100	/* External interrupt 12	    */
+#define UIC_SRE		0x00000080	/* Serial ROM error		    */
+#define UIC_RSVD2	0x00000040	/* Reserved			    */
+#define UIC_RSVD3	0x00000020	/* Reserved			    */
+#define UIC_PAE		0x00000010	/* PCI asynchronous error	    */
+#define UIC_ETH0	0x00000008	/* Ethernet 0			    */
+#define UIC_EWU0	0x00000004	/* Ethernet 0 wakeup		    */
+#define UIC_ETH1	0x00000002	/* Ethernet 1			    */
+#define UIC_EWU1	0x00000001	/* Ethernet 1 wakeup		    */
+#elif !defined(CONFIG_440SPE)
 #define UIC_MS		0x80000000	/* MAL SERR			    */
 #define UIC_MTDE	0x40000000	/* MAL TXDE			    */
 #define UIC_MRDE	0x20000000	/* MAL RXDE			    */
@@ -890,6 +1624,117 @@
 #define UICB0_ALL		(UICB0_UIC0CI | UICB0_UIC0NCI | UICB0_UIC1CI | \
 						 UICB0_UIC1NCI | UICB0_UIC2CI | UICB0_UIC2NCI)
 #endif /* CONFIG_440GX */
+/*---------------------------------------------------------------------------+
+|  Universal interrupt controller interrupts
++---------------------------------------------------------------------------*/
+#if defined(CONFIG_440SPE)
+/*#define UICB0_UIC0CI	0x80000000*/	/* UIC0 Critical Interrupt	    */
+/*#define UICB0_UIC0NCI	0x40000000*/	/* UIC0 Noncritical Interrupt	    */
+#define UICB0_UIC1CI	0x00000002	/* UIC1 Critical Interrupt	    */
+#define UICB0_UIC1NCI	0x00000001	/* UIC1 Noncritical Interrupt	    */
+#define UICB0_UIC2CI	0x00200000	/* UIC2 Critical Interrupt	    */
+#define UICB0_UIC2NCI	0x00100000	/* UIC2 Noncritical Interrupt	    */
+#define UICB0_UIC3CI	0x00008000	/* UIC3 Critical Interrupt	    */
+#define UICB0_UIC3NCI	0x00004000	/* UIC3 Noncritical Interrupt	    */
+
+#define UICB0_ALL		(UICB0_UIC1CI | UICB0_UIC1NCI | UICB0_UIC2CI | \
+						 UICB0_UIC2NCI | UICB0_UIC3CI | UICB0_UIC3NCI)
+/*---------------------------------------------------------------------------+
+|  Universal interrupt controller 0 interrupts (UIC0)
++---------------------------------------------------------------------------*/
+#define UIC_U0		0x80000000	/* UART 0			    */
+#define UIC_U1		0x40000000	/* UART 1			    */
+#define UIC_IIC0	0x20000000	/* IIC				    */
+#define UIC_IIC1	0x10000000	/* IIC				    */
+#define UIC_PIM		0x08000000	/* PCI inbound message		    */
+#define UIC_PCRW	0x04000000	/* PCI command register write	    */
+#define UIC_PPM		0x02000000	/* PCI power management		    */
+#define UIC_PVPDA	0x01000000	/* PCIx 0 vpd access		    */
+#define UIC_MSI0	0x00800000	/* PCIx MSI level 0		    */
+#define UIC_EIR15	0x00400000	/* External intp 15		    */
+#define UIC_PEMSI0	0x00080000	/* PCIe MSI level 0		    */
+#define UIC_PEMSI1	0x00040000	/* PCIe MSI level 1		    */
+#define UIC_PEMSI2	0x00020000	/* PCIe MSI level 2		    */
+#define UIC_PEMSI3	0x00010000	/* PCIe MSI level 3		    */
+#define UIC_EIR14	0x00002000	/* External interrupt 14	    */
+#define UIC_D0CPFF	0x00001000	/* DMA0 cp fifo full		    */
+#define UIC_D0CSNS	0x00000800	/* DMA0 cs fifo needs service	    */
+#define UIC_D1CPFF	0x00000400	/* DMA1 cp fifo full		    */
+#define UIC_D1CSNS	0x00000200	/* DMA1 cs fifo needs service	    */
+#define UIC_I2OID	0x00000100	/* I2O inbound door bell	    */
+#define UIC_I2OLNE	0x00000080	/* I2O Inbound Post List FIFO Not Empty */
+#define UIC_I20R0LL	0x00000040	/* I2O Region 0 Low Latency PLB Write */
+#define UIC_I2OR1LL	0x00000020	/* I2O Region 1 Low Latency PLB Write */
+#define UIC_I20R0HB	0x00000010	/* I2O Region 0 High Bandwidth PLB Write */
+#define UIC_I2OR1HB	0x00000008	/* I2O Region 1 High Bandwidth PLB Write */
+#define UIC_CPTCNT	0x00000004	/* GPT Count Timer		    */
+/*---------------------------------------------------------------------------+
+|  Universal interrupt controller 1 interrupts (UIC1)
++---------------------------------------------------------------------------*/
+#define UIC_EIR13	0x80000000	/* externei intp 13		    */
+#define UIC_MS		0x40000000	/* MAL SERR			    */
+#define UIC_MTDE	0x20000000	/* MAL TXDE			    */
+#define UIC_MRDE	0x10000000	/* MAL RXDE			    */
+#define UIC_DEUE	0x08000000	/* DDR SDRAM ECC correct/uncorrectable error */
+#define UIC_EBCO	0x04000000	/* EBCO interrupt status	    */
+#define UIC_MTE		0x02000000	/* MAL TXEOB			    */
+#define UIC_MRE		0x01000000	/* MAL RXEOB			    */
+#define UIC_MSI1	0x00800000	/* PCI MSI level 1		    */
+#define UIC_MSI2	0x00400000	/* PCI MSI level 2		    */
+#define UIC_MSI3	0x00200000	/* PCI MSI level 3		    */
+#define UIC_L2C		0x00100000	/* L2 cache			    */
+#define UIC_CT0		0x00080000	/* GPT compare timer 0		    */
+#define UIC_CT1		0x00040000	/* GPT compare timer 1		    */
+#define UIC_CT2		0x00020000	/* GPT compare timer 2		    */
+#define UIC_CT3		0x00010000	/* GPT compare timer 3		    */
+#define UIC_CT4		0x00008000	/* GPT compare timer 4		    */
+#define UIC_EIR12	0x00004000	/* External interrupt 12	    */
+#define UIC_EIR11	0x00002000	/* External interrupt 11	    */
+#define UIC_EIR10	0x00001000	/* External interrupt 10	    */
+#define UIC_EIR9	0x00000800	/* External interrupt 9		    */
+#define UIC_EIR8	0x00000400	/* External interrupt 8		    */
+#define UIC_DMAE	0x00000200	/* dma error			    */
+#define UIC_I2OE	0x00000100	/* i2o error			    */
+#define UIC_SRE		0x00000080	/* Serial ROM error		    */
+#define UIC_PCIXAE	0x00000040	/* Pcix0 async error		    */
+#define UIC_EIR7	0x00000020	/* External interrupt 7		    */
+#define UIC_EIR6	0x00000010	/* External interrupt 6		    */
+#define UIC_ETH0	0x00000008	/* Ethernet 0			    */
+#define UIC_EWU0	0x00000004	/* Ethernet 0 wakeup		    */
+#define UIC_ETH1	0x00000002	/* reserved			    */
+#define UIC_XOR		0x00000001	/* xor				    */
+
+/*---------------------------------------------------------------------------+
+|  Universal interrupt controller 2 interrupts (UIC2)
++---------------------------------------------------------------------------*/
+#define UIC_PEOAL	0x80000000	/* PE0  AL			    */
+#define UIC_PEOVA	0x40000000	/* PE0  VPD access		    */
+#define UIC_PEOHRR	0x20000000	/* PE0 Host reset request rising    */
+#define UIC_PE0HRF	0x10000000	/* PE0 Host reset request falling   */
+#define UIC_PE0TCR	0x08000000	/* PE0 TCR			    */
+#define UIC_PE0BVCO	0x04000000	/* PE0 Busmaster VCO		    */
+#define UIC_PE0DCRE	0x02000000	/* PE0 DCR error		    */
+#define UIC_PE1AL	0x00800000	/* PE1  AL			    */
+#define UIC_PE1VA	0x00400000	/* PE1  VPD access		    */
+#define UIC_PE1HRR	0x00200000	/* PE1 Host reset request rising    */
+#define UIC_PE1HRF	0x00100000	/* PE1 Host reset request falling   */
+#define UIC_PE1TCR	0x00080000	/* PE1 TCR			    */
+#define UIC_PE1BVCO	0x00040000	/* PE1 Busmaster VCO		    */
+#define UIC_PE1DCRE	0x00020000	/* PE1 DCR error		    */
+#define UIC_PE2AL	0x00008000	/* PE2  AL			    */
+#define UIC_PE2VA	0x00004000	/* PE2  VPD access		    */
+#define UIC_PE2HRR	0x00002000	/* PE2 Host reset request rising    */
+#define UIC_PE2HRF	0x00001000	/* PE2 Host reset request falling   */
+#define UIC_PE2TCR	0x00000800	/* PE2 TCR			    */
+#define UIC_PE2BVCO	0x00000400	/* PE2 Busmaster VCO		    */
+#define UIC_PE2DCRE	0x00000200	/* PE2 DCR error		    */
+#define UIC_EIR5	0x00000080	/* External interrupt 5		    */
+#define UIC_EIR4	0x00000040	/* External interrupt 4		    */
+#define UIC_EIR3	0x00000020	/* External interrupt 3		    */
+#define UIC_EIR2	0x00000010	/* External interrupt 2		    */
+#define UIC_EIR1	0x00000008	/* External interrupt 1		    */
+#define UIC_EIR0	0x00000004	/* External interrupt 0		    */
+#endif /* CONFIG_440SPE */
 
 /*-----------------------------------------------------------------------------+
 |  External Bus Controller Bit Settings
@@ -981,6 +1826,432 @@
 /*-----------------------------------------------------------------------------+
 |  SDR0 Bit Settings
 +-----------------------------------------------------------------------------*/
+#if defined(CONFIG_440SPE)
+#define SDR0_CP440			0x0180
+#define SDR0_CP440_ERPN_MASK		0x30000000
+#define SDR0_CP440_ERPN_MASK_HI		0x3000
+#define SDR0_CP440_ERPN_MASK_LO		0x0000
+#define SDR0_CP440_ERPN_EBC		0x10000000
+#define SDR0_CP440_ERPN_EBC_HI		0x1000
+#define SDR0_CP440_ERPN_EBC_LO		0x0000
+#define SDR0_CP440_ERPN_PCI		0x20000000
+#define SDR0_CP440_ERPN_PCI_HI		0x2000
+#define SDR0_CP440_ERPN_PCI_LO		0x0000
+#define SDR0_CP440_ERPN_ENCODE(n)	((((unsigned long)(n))&0x03)<<28)
+#define SDR0_CP440_ERPN_DECODE(n)	((((unsigned long)(n))>>28)&0x03)
+#define SDR0_CP440_NTO1_MASK		0x00000002
+#define SDR0_CP440_NTO1_NTOP		0x00000000
+#define SDR0_CP440_NTO1_NTO1		0x00000002
+#define SDR0_CP440_NTO1_ENCODE(n)	((((unsigned long)(n))&0x01)<<1)
+#define SDR0_CP440_NTO1_DECODE(n)	((((unsigned long)(n))>>1)&0x01)
+#define SDR0_CFGADDR			0x00E	/*already defined line 277 */
+#define SDR0_CFGDATA			0x00F
+
+
+#define SDR0_SDSTP0			0x0020
+#define SDR0_SDSTP0_ENG_MASK		0x80000000
+#define SDR0_SDSTP0_ENG_PLLDIS		0x00000000
+#define SDR0_SDSTP0_ENG_PLLENAB		0x80000000
+#define SDR0_SDSTP0_ENG_ENCODE(n)	((((unsigned long)(n))&0x01)<<31)
+#define SDR0_SDSTP0_ENG_DECODE(n)	((((unsigned long)(n))>>31)&0x01)
+#define SDR0_SDSTP0_SRC_MASK		0x40000000
+#define SDR0_SDSTP0_SRC_PLLOUTA		0x00000000
+#define SDR0_SDSTP0_SRC_PLLOUTB		0x40000000
+#define SDR0_SDSTP0_SRC_ENCODE(n)	((((unsigned long)(n))&0x01)<<30)
+#define SDR0_SDSTP0_SRC_DECODE(n)	((((unsigned long)(n))>>30)&0x01)
+#define SDR0_SDSTP0_SEL_MASK		0x38000000
+#define SDR0_SDSTP0_SEL_PLLOUT		0x00000000
+#define SDR0_SDSTP0_SEL_CPU		0x08000000
+#define SDR0_SDSTP0_SEL_EBC		0x28000000
+#define SDR0_SDSTP0_SEL_ENCODE(n)	((((unsigned long)(n))&0x07)<<27)
+#define SDR0_SDSTP0_SEL_DECODE(n)	((((unsigned long)(n))>>27)&0x07)
+#define SDR0_SDSTP0_TUNE_MASK		0x07FE0000
+#define SDR0_SDSTP0_TUNE_ENCODE(n)	((((unsigned long)(n))&0x3FF)<<17)
+#define SDR0_SDSTP0_TUNE_DECODE(n)	((((unsigned long)(n))>>17)&0x3FF)
+#define SDR0_SDSTP0_FBDV_MASK		0x0001F000
+#define SDR0_SDSTP0_FBDV_ENCODE(n)	((((unsigned long)(n))&0x1F)<<12)
+#define SDR0_SDSTP0_FBDV_DECODE(n)	((((((unsigned long)(n))>>12)-1)&0x1F)+1)
+#define SDR0_SDSTP0_FWDVA_MASK		0x00000F00
+#define SDR0_SDSTP0_FWDVA_ENCODE(n)	((((unsigned long)(n))&0x0F)<<8)
+#define SDR0_SDSTP0_FWDVA_DECODE(n)	((((((unsigned long)(n))>>8)-1)&0x0F)+1)
+#define SDR0_SDSTP0_FWDVB_MASK		0x000000E0
+#define SDR0_SDSTP0_FWDVB_ENCODE(n)	((((unsigned long)(n))&0x07)<<5)
+#define SDR0_SDSTP0_FWDVB_DECODE(n)	((((((unsigned long)(n))>>5)-1)&0x07)+1)
+#define SDR0_SDSTP0_PRBDV0_MASK		0x0000001C
+#define SDR0_SDSTP0_PRBDV0_ENCODE(n)	((((unsigned long)(n))&0x07)<<2)
+#define SDR0_SDSTP0_PRBDV0_DECODE(n)	((((((unsigned long)(n))>>2)-1)&0x07)+1)
+#define SDR0_SDSTP0_OPBDV0_MASK		0x00000003
+#define SDR0_SDSTP0_OPBDV0_ENCODE(n)	((((unsigned long)(n))&0x03)<<0)
+#define SDR0_SDSTP0_OPBDV0_DECODE(n)	((((((unsigned long)(n))>>0)-1)&0x03)+1)
+
+
+#define SDR0_SDSTP1			0x0021
+#define SDR0_SDSTP1_LFBDV_MASK		0xFC000000
+#define SDR0_SDSTP1_LFBDV_ENCODE(n)	((((unsigned long)(n))&0x3F)<<26)
+#define SDR0_SDSTP1_LFBDV_DECODE(n)	((((unsigned long)(n))>>26)&0x3F)
+#define SDR0_SDSTP1_PERDV0_MASK		0x03000000
+#define SDR0_SDSTP1_PERDV0_ENCODE(n)	((((unsigned long)(n))&0x03)<<24)
+#define SDR0_SDSTP1_PERDV0_DECODE(n)	((((unsigned long)(n))>>24)&0x03)
+#define SDR0_SDSTP1_MALDV0_MASK		0x00C00000
+#define SDR0_SDSTP1_MALDV0_ENCODE(n)	((((unsigned long)(n))&0x03)<<22)
+#define SDR0_SDSTP1_MALDV0_DECODE(n)	((((unsigned long)(n))>>22)&0x03)
+#define SDR0_SDSTP1_DDR_MODE_MASK	0x00300000
+#define SDR0_SDSTP1_DDR1_MODE		0x00100000
+#define SDR0_SDSTP1_DDR2_MODE		0x00200000
+#define SDR0_SDSTP1_DDR_ENCODE(n)	((((unsigned long)(n))&0x03)<<20)
+#define SDR0_SDSTP1_DDR_DECODE(n)	((((unsigned long)(n))>>20)&0x03)
+#define SDR0_SDSTP1_ERPN_MASK		0x00080000
+#define SDR0_SDSTP1_ERPN_EBC		0x00000000
+#define SDR0_SDSTP1_ERPN_PCI		0x00080000
+#define SDR0_SDSTP1_PAE_MASK		0x00040000
+#define SDR0_SDSTP1_PAE_DISABLE		0x00000000
+#define SDR0_SDSTP1_PAE_ENABLE		0x00040000
+#define SDR0_SDSTP1_PAE_ENCODE(n)	((((unsigned long)(n))&0x01)<<18)
+#define SDR0_SDSTP1_PAE_DECODE(n)	((((unsigned long)(n))>>18)&0x01)
+#define SDR0_SDSTP1_PHCE_MASK		0x00020000
+#define SDR0_SDSTP1_PHCE_DISABLE	0x00000000
+#define SDR0_SDSTP1_PHCE_ENABLE		0x00020000
+#define SDR0_SDSTP1_PHCE_ENCODE(n)	((((unsigned long)(n))&0x01)<<17)
+#define SDR0_SDSTP1_PHCE_DECODE(n)	((((unsigned long)(n))>>17)&0x01)
+#define SDR0_SDSTP1_PISE_MASK		0x00010000
+#define SDR0_SDSTP1_PISE_DISABLE	0x00000000
+#define SDR0_SDSTP1_PISE_ENABLE		0x00001000
+#define SDR0_SDSTP1_PISE_ENCODE(n)	((((unsigned long)(n))&0x01)<<16)
+#define SDR0_SDSTP1_PISE_DECODE(n)	((((unsigned long)(n))>>16)&0x01)
+#define SDR0_SDSTP1_PCWE_MASK		0x00008000
+#define SDR0_SDSTP1_PCWE_DISABLE	0x00000000
+#define SDR0_SDSTP1_PCWE_ENABLE		0x00008000
+#define SDR0_SDSTP1_PCWE_ENCODE(n)	((((unsigned long)(n))&0x01)<<15)
+#define SDR0_SDSTP1_PCWE_DECODE(n)	((((unsigned long)(n))>>15)&0x01)
+#define SDR0_SDSTP1_PPIM_MASK		0x00007800
+#define SDR0_SDSTP1_PPIM_ENCODE(n)	((((unsigned long)(n))&0x0F)<<11)
+#define SDR0_SDSTP1_PPIM_DECODE(n)	((((unsigned long)(n))>>11)&0x0F)
+#define SDR0_SDSTP1_PR64E_MASK		0x00000400
+#define SDR0_SDSTP1_PR64E_DISABLE	0x00000000
+#define SDR0_SDSTP1_PR64E_ENABLE	0x00000400
+#define SDR0_SDSTP1_PR64E_ENCODE(n)	((((unsigned long)(n))&0x01)<<10)
+#define SDR0_SDSTP1_PR64E_DECODE(n)	((((unsigned long)(n))>>10)&0x01)
+#define SDR0_SDSTP1_PXFS_MASK		0x00000300
+#define SDR0_SDSTP1_PXFS_100_133	0x00000000
+#define SDR0_SDSTP1_PXFS_66_100		0x00000100
+#define SDR0_SDSTP1_PXFS_50_66		0x00000200
+#define SDR0_SDSTP1_PXFS_0_50		0x00000300
+#define SDR0_SDSTP1_PXFS_ENCODE(n)	((((unsigned long)(n))&0x03)<<8)
+#define SDR0_SDSTP1_PXFS_DECODE(n)	((((unsigned long)(n))>>8)&0x03)
+#define SDR0_SDSTP1_EBCW_MASK		0x00000080 /* SOP */
+#define SDR0_SDSTP1_EBCW_8_BITS		0x00000000 /* SOP */
+#define SDR0_SDSTP1_EBCW_16_BITS	0x00000080 /* SOP */
+#define SDR0_SDSTP1_DBGEN_MASK		0x00000030 /* $218C */
+#define SDR0_SDSTP1_DBGEN_FUNC		0x00000000
+#define SDR0_SDSTP1_DBGEN_TRACE		0x00000010
+#define SDR0_SDSTP1_DBGEN_ENCODE(n)	((((unsigned long)(n))&0x03)<<4) /* $218C */
+#define SDR0_SDSTP1_DBGEN_DECODE(n)	((((unsigned long)(n))>>4)&0x03) /* $218C */
+#define SDR0_SDSTP1_ETH_MASK		0x00000004
+#define SDR0_SDSTP1_ETH_10_100		0x00000000
+#define SDR0_SDSTP1_ETH_GIGA		0x00000004
+#define SDR0_SDSTP1_ETH_ENCODE(n)	((((unsigned long)(n))&0x01)<<2)
+#define SDR0_SDSTP1_ETH_DECODE(n)	((((unsigned long)(n))>>2)&0x01)
+#define SDR0_SDSTP1_NTO1_MASK		0x00000001
+#define SDR0_SDSTP1_NTO1_DISABLE	0x00000000
+#define SDR0_SDSTP1_NTO1_ENABLE		0x00000001
+#define SDR0_SDSTP1_NTO1_ENCODE(n)	((((unsigned long)(n))&0x01)<<0)
+#define SDR0_SDSTP1_NTO1_DECODE(n)	((((unsigned long)(n))>>0)&0x01)
+
+#define SDR0_SDSTP2			0x0022
+#define SDR0_SDSTP2_P1AE_MASK		0x80000000
+#define SDR0_SDSTP2_P1AE_DISABLE	0x00000000
+#define SDR0_SDSTP2_P1AE_ENABLE		0x80000000
+#define SDR0_SDSTP2_P1AE_ENCODE(n)	((((unsigned long)(n))&0x01)<<31)
+#define SDR0_SDSTP2_P1AE_DECODE(n)	((((unsigned long)(n))>>31)&0x01)
+#define SDR0_SDSTP2_P1HCE_MASK		0x40000000
+#define SDR0_SDSTP2_P1HCE_DISABLE	0x00000000
+#define SDR0_SDSTP2_P1HCE_ENABLE	0x40000000
+#define SDR0_SDSTP2_P1HCE_ENCODE(n)	((((unsigned long)(n))&0x01)<<30)
+#define SDR0_SDSTP2_P1HCE_DECODE(n)	((((unsigned long)(n))>>30)&0x01)
+#define SDR0_SDSTP2_P1ISE_MASK		0x20000000
+#define SDR0_SDSTP2_P1ISE_DISABLE	0x00000000
+#define SDR0_SDSTP2_P1ISE_ENABLE	0x20000000
+#define SDR0_SDSTP2_P1ISE_ENCODE(n)	((((unsigned long)(n))&0x01)<<29)
+#define SDR0_SDSTP2_P1ISE_DECODE(n)	((((unsigned long)(n))>>29)&0x01)
+#define SDR0_SDSTP2_P1CWE_MASK		0x10000000
+#define SDR0_SDSTP2_P1CWE_DISABLE	0x00000000
+#define SDR0_SDSTP2_P1CWE_ENABLE	0x10000000
+#define SDR0_SDSTP2_P1CWE_ENCODE(n)	((((unsigned long)(n))&0x01)<<28)
+#define SDR0_SDSTP2_P1CWE_DECODE(n)	((((unsigned long)(n))>>28)&0x01)
+#define SDR0_SDSTP2_P1PIM_MASK		0x0F000000
+#define SDR0_SDSTP2_P1PIM_ENCODE(n)	((((unsigned long)(n))&0x0F)<<24)
+#define SDR0_SDSTP2_P1PIM_DECODE(n)	((((unsigned long)(n))>>24)&0x0F)
+#define SDR0_SDSTP2_P1R64E_MASK		0x00800000
+#define SDR0_SDSTP2_P1R64E_DISABLE	0x00000000
+#define SDR0_SDSTP2_P1R64E_ENABLE	0x00800000
+#define SDR0_SDSTP2_P1R64E_ENCODE(n)	((((unsigned long)(n))&0x01)<<23)
+#define SDR0_SDSTP2_P1R64E_DECODE(n)	((((unsigned long)(n))>>23)&0x01)
+#define SDR0_SDSTP2_P1XFS_MASK		0x00600000
+#define SDR0_SDSTP2_P1XFS_100_133	0x00000000
+#define SDR0_SDSTP2_P1XFS_66_100	0x00200000
+#define SDR0_SDSTP2_P1XFS_50_66		0x00400000
+#define SDR0_SDSTP2_P1XFS_0_50		0x00600000
+#define SDR0_SDSTP2_P1XFS_ENCODE(n)	((((unsigned long)(n))&0x03)<<21)
+#define SDR0_SDSTP2_P1XFS_DECODE(n)	((((unsigned long)(n))>>21)&0x03)
+#define SDR0_SDSTP2_P2AE_MASK		0x00040000
+#define SDR0_SDSTP2_P2AE_DISABLE	0x00000000
+#define SDR0_SDSTP2_P2AE_ENABLE		0x00040000
+#define SDR0_SDSTP2_P2AE_ENCODE(n)	((((unsigned long)(n))&0x01)<<18)
+#define SDR0_SDSTP2_P2AE_DECODE(n)	((((unsigned long)(n))>>18)&0x01)
+#define SDR0_SDSTP2_P2HCE_MASK		0x00020000
+#define SDR0_SDSTP2_P2HCE_DISABLE	0x00000000
+#define SDR0_SDSTP2_P2HCE_ENABLE	0x00020000
+#define SDR0_SDSTP2_P2HCE_ENCODE(n)	((((unsigned long)(n))&0x01)<<17)
+#define SDR0_SDSTP2_P2HCE_DECODE(n)	((((unsigned long)(n))>>17)&0x01)
+#define SDR0_SDSTP2_P2ISE_MASK		0x00010000
+#define SDR0_SDSTP2_P2ISE_DISABLE	0x00000000
+#define SDR0_SDSTP2_P2ISE_ENABLE	0x00010000
+#define SDR0_SDSTP2_P2ISE_ENCODE(n)	((((unsigned long)(n))&0x01)<<16)
+#define SDR0_SDSTP2_P2ISE_DECODE(n)	((((unsigned long)(n))>>16)&0x01)
+#define SDR0_SDSTP2_P2CWE_MASK		0x00008000
+#define SDR0_SDSTP2_P2CWE_DISABLE	0x00000000
+#define SDR0_SDSTP2_P2CWE_ENABLE	0x00008000
+#define SDR0_SDSTP2_P2CWE_ENCODE(n)	((((unsigned long)(n))&0x01)<<15)
+#define SDR0_SDSTP2_P2CWE_DECODE(n)	((((unsigned long)(n))>>15)&0x01)
+#define SDR0_SDSTP2_P2PIM_MASK		0x00007800
+#define SDR0_SDSTP2_P2PIM_ENCODE(n)	((((unsigned long)(n))&0x0F)<<11)
+#define SDR0_SDSTP2_P2PIM_DECODE(n)	((((unsigned long)(n))>>11)&0x0F)
+#define SDR0_SDSTP2_P2XFS_MASK		0x00000300
+#define SDR0_SDSTP2_P2XFS_100_133	0x00000000
+#define SDR0_SDSTP2_P2XFS_66_100	0x00000100
+#define SDR0_SDSTP2_P2XFS_50_66		0x00000200
+#define SDR0_SDSTP2_P2XFS_0_50		0x00000100
+#define SDR0_SDSTP2_P2XFS_ENCODE(n)	((((unsigned long)(n))&0x03)<<8)
+#define SDR0_SDSTP2_P2XFS_DECODE(n)	((((unsigned long)(n))>>8)&0x03)
+
+#define SDR0_SDSTP3			0x0023
+
+#define SDR0_PINSTP			0x0040
+#define SDR0_PINSTP_BOOTSTRAP_MASK	0xC0000000  /* Strap Bits */
+#define SDR0_PINSTP_BOOTSTRAP_SETTINGS0	0x00000000  /* Default strap settings 0 (EBC boot) */
+#define SDR0_PINSTP_BOOTSTRAP_SETTINGS1	0x40000000  /* Default strap settings 1 (PCI boot) */
+#define SDR0_PINSTP_BOOTSTRAP_IIC_54_EN	0x80000000  /* Serial Device Enabled - Addr = 0x54 */
+#define SDR0_PINSTP_BOOTSTRAP_IIC_50_EN	0xC0000000  /* Serial Device Enabled - Addr = 0x50 */
+#define SDR0_SDCS			0x0060
+#define SDR0_ECID0			0x0080
+#define SDR0_ECID1			0x0081
+#define SDR0_ECID2			0x0082
+#define SDR0_JTAG			0x00C0
+
+#define SDR0_DDR0			0x00E1
+#define SDR0_DDR0_DPLLRST		0x80000000
+#define SDR0_DDR0_DDRM_MASK		0x60000000
+#define SDR0_DDR0_DDRM_DDR1		0x20000000
+#define SDR0_DDR0_DDRM_DDR2		0x40000000
+#define SDR0_DDR0_DDRM_ENCODE(n)	((((unsigned long)(n))&0x03)<<29)
+#define SDR0_DDR0_DDRM_DECODE(n)	((((unsigned long)(n))>>29)&0x03)
+#define SDR0_DDR0_TUNE_ENCODE(n)	((((unsigned long)(n))&0x2FF)<<0)
+#define SDR0_DDR0_TUNE_DECODE(n)	((((unsigned long)(n))>>0)&0x2FF)
+
+#define SDR0_UART0			0x0120
+#define SDR0_UART1			0x0121
+#define SDR0_UART2			0x0122
+#define SDR0_UARTX_UXICS_MASK		0xF0000000
+#define SDR0_UARTX_UXICS_PLB		0x20000000
+#define SDR0_UARTX_UXEC_MASK		0x00800000
+#define SDR0_UARTX_UXEC_INT		0x00000000
+#define SDR0_UARTX_UXEC_EXT		0x00800000
+#define SDR0_UARTX_UXDIV_MASK		0x000000FF
+#define SDR0_UARTX_UXDIV_ENCODE(n)	((((unsigned long)(n))&0xFF)<<0)
+#define SDR0_UARTX_UXDIV_DECODE(n)	((((((unsigned long)(n))>>0)-1)&0xFF)+1)
+
+#define SDR0_CP440			0x0180
+#define SDR0_CP440_ERPN_MASK		0x30000000
+#define SDR0_CP440_ERPN_MASK_HI		0x3000
+#define SDR0_CP440_ERPN_MASK_LO		0x0000
+#define SDR0_CP440_ERPN_EBC		0x10000000
+#define SDR0_CP440_ERPN_EBC_HI		0x1000
+#define SDR0_CP440_ERPN_EBC_LO		0x0000
+#define SDR0_CP440_ERPN_PCI		0x20000000
+#define SDR0_CP440_ERPN_PCI_HI		0x2000
+#define SDR0_CP440_ERPN_PCI_LO		0x0000
+#define SDR0_CP440_ERPN_ENCODE(n)	((((unsigned long)(n))&0x03)<<28)
+#define SDR0_CP440_ERPN_DECODE(n)	((((unsigned long)(n))>>28)&0x03)
+#define SDR0_CP440_NTO1_MASK		0x00000002
+#define SDR0_CP440_NTO1_NTOP		0x00000000
+#define SDR0_CP440_NTO1_NTO1		0x00000002
+#define SDR0_CP440_NTO1_ENCODE(n)	((((unsigned long)(n))&0x01)<<1)
+#define SDR0_CP440_NTO1_DECODE(n)	((((unsigned long)(n))>>1)&0x01)
+
+#define SDR0_XCR0			0x01C0
+#define SDR0_XCR1			0x01C3
+#define SDR0_XCR2			0x01C6
+#define SDR0_XCRn_PAE_MASK		0x80000000
+#define SDR0_XCRn_PAE_DISABLE		0x00000000
+#define SDR0_XCRn_PAE_ENABLE		0x80000000
+#define SDR0_XCRn_PAE_ENCODE(n)		((((unsigned long)(n))&0x01)<<31)
+#define SDR0_XCRn_PAE_DECODE(n)		((((unsigned long)(n))>>31)&0x01)
+#define SDR0_XCRn_PHCE_MASK		0x40000000
+#define SDR0_XCRn_PHCE_DISABLE		0x00000000
+#define SDR0_XCRn_PHCE_ENABLE		0x40000000
+#define SDR0_XCRn_PHCE_ENCODE(n)	((((unsigned long)(n))&0x01)<<30)
+#define SDR0_XCRn_PHCE_DECODE(n)	((((unsigned long)(n))>>30)&0x01)
+#define SDR0_XCRn_PISE_MASK		0x20000000
+#define SDR0_XCRn_PISE_DISABLE		0x00000000
+#define SDR0_XCRn_PISE_ENABLE		0x20000000
+#define SDR0_XCRn_PISE_ENCODE(n)	((((unsigned long)(n))&0x01)<<29)
+#define SDR0_XCRn_PISE_DECODE(n)	((((unsigned long)(n))>>29)&0x01)
+#define SDR0_XCRn_PCWE_MASK		0x10000000
+#define SDR0_XCRn_PCWE_DISABLE		0x00000000
+#define SDR0_XCRn_PCWE_ENABLE		0x10000000
+#define SDR0_XCRn_PCWE_ENCODE(n)	((((unsigned long)(n))&0x01)<<28)
+#define SDR0_XCRn_PCWE_DECODE(n)	((((unsigned long)(n))>>28)&0x01)
+#define SDR0_XCRn_PPIM_MASK		0x0F000000
+#define SDR0_XCRn_PPIM_ENCODE(n)	((((unsigned long)(n))&0x0F)<<24)
+#define SDR0_XCRn_PPIM_DECODE(n)	((((unsigned long)(n))>>24)&0x0F)
+#define SDR0_XCRn_PR64E_MASK		0x00800000
+#define SDR0_XCRn_PR64E_DISABLE		0x00000000
+#define SDR0_XCRn_PR64E_ENABLE		0x00800000
+#define SDR0_XCRn_PR64E_ENCODE(n)	((((unsigned long)(n))&0x01)<<23)
+#define SDR0_XCRn_PR64E_DECODE(n)	((((unsigned long)(n))>>23)&0x01)
+#define SDR0_XCRn_PXFS_MASK		0x00600000
+#define SDR0_XCRn_PXFS_100_133		0x00000000
+#define SDR0_XCRn_PXFS_66_100		0x00200000
+#define SDR0_XCRn_PXFS_50_66		0x00400000
+#define SDR0_XCRn_PXFS_0_33		0x00600000
+#define SDR0_XCRn_PXFS_ENCODE(n)	((((unsigned long)(n))&0x03)<<21)
+#define SDR0_XCRn_PXFS_DECODE(n)	((((unsigned long)(n))>>21)&0x03)
+
+#define SDR0_XPLLC0			0x01C1
+#define SDR0_XPLLD0			0x01C2
+#define SDR0_XPLLC1			0x01C4
+#define SDR0_XPLLD1			0x01C5
+#define SDR0_XPLLC2			0x01C7
+#define SDR0_XPLLD2			0x01C8
+#define SDR0_SRST			0x0200
+#define SDR0_SLPIPE			0x0220
+
+#define SDR0_AMP0			0x0240
+#define SDR0_AMP0_PRIORITY		0xFFFF0000
+#define SDR0_AMP0_ALTERNATE_PRIORITY	0x0000FF00
+#define SDR0_AMP0_RESERVED_BITS_MASK	0x000000FF
+
+#define SDR0_AMP1			0x0241
+#define SDR0_AMP1_PRIORITY		0xFC000000
+#define SDR0_AMP1_ALTERNATE_PRIORITY	0x0000E000
+#define SDR0_AMP1_RESERVED_BITS_MASK	0x03FF1FFF
+
+#define SDR0_MIRQ0			0x0260
+#define SDR0_MIRQ1			0x0261
+#define SDR0_MALTBL			0x0280
+#define SDR0_MALRBL			0x02A0
+#define SDR0_MALTBS			0x02C0
+#define SDR0_MALRBS			0x02E0
+
+/* Reserved for Customer Use */
+#define SDR0_CUST0			0x4000
+#define SDR0_CUST0_AUTONEG_MASK		0x8000000
+#define SDR0_CUST0_NO_AUTONEG		0x0000000
+#define SDR0_CUST0_AUTONEG		0x8000000
+#define SDR0_CUST0_ETH_FORCE_MASK	0x6000000
+#define SDR0_CUST0_ETH_FORCE_10MHZ	0x0000000
+#define SDR0_CUST0_ETH_FORCE_100MHZ	0x2000000
+#define SDR0_CUST0_ETH_FORCE_1000MHZ	0x4000000
+#define SDR0_CUST0_ETH_DUPLEX_MASK	0x1000000
+#define SDR0_CUST0_ETH_HALF_DUPLEX	0x0000000
+#define SDR0_CUST0_ETH_FULL_DUPLEX	0x1000000
+
+#define SDR0_SDSTP4			0x4001
+#define SDR0_CUST1			0x4002
+#define SDR0_SDSTP5			0x4003
+#define SDR0_CUST2			0x4004
+#define SDR0_SDSTP6			0x4005
+#define SDR0_CUST3			0x4006
+#define SDR0_SDSTP7			0x4007
+
+#define SDR0_PFC0			0x4100
+#define SDR0_PFC0_GPIO_0		0x80000000
+#define SDR0_PFC0_PCIX0REQ2_N		0x00000000
+#define SDR0_PFC0_GPIO_1		0x40000000
+#define SDR0_PFC0_PCIX0REQ3_N		0x00000000
+#define SDR0_PFC0_GPIO_2		0x20000000
+#define SDR0_PFC0_PCIX0GNT2_N		0x00000000
+#define SDR0_PFC0_GPIO_3		0x10000000
+#define SDR0_PFC0_PCIX0GNT3_N		0x00000000
+#define SDR0_PFC0_GPIO_4		0x08000000
+#define SDR0_PFC0_PCIX1REQ2_N		0x00000000
+#define SDR0_PFC0_GPIO_5		0x04000000
+#define SDR0_PFC0_PCIX1REQ3_N		0x00000000
+#define SDR0_PFC0_GPIO_6		0x02000000
+#define SDR0_PFC0_PCIX1GNT2_N		0x00000000
+#define SDR0_PFC0_GPIO_7		0x01000000
+#define SDR0_PFC0_PCIX1GNT3_N		0x00000000
+#define SDR0_PFC0_GPIO_8		0x00800000
+#define SDR0_PFC0_PERREADY		0x00000000
+#define SDR0_PFC0_GPIO_9		0x00400000
+#define SDR0_PFC0_PERCS1_N		0x00000000
+#define SDR0_PFC0_GPIO_10		0x00200000
+#define SDR0_PFC0_PERCS2_N		0x00000000
+#define SDR0_PFC0_GPIO_11		0x00100000
+#define SDR0_PFC0_IRQ0			0x00000000
+#define SDR0_PFC0_GPIO_12		0x00080000
+#define SDR0_PFC0_IRQ1			0x00000000
+#define SDR0_PFC0_GPIO_13		0x00040000
+#define SDR0_PFC0_IRQ2			0x00000000
+#define SDR0_PFC0_GPIO_14		0x00020000
+#define SDR0_PFC0_IRQ3			0x00000000
+#define SDR0_PFC0_GPIO_15		0x00010000
+#define SDR0_PFC0_IRQ4			0x00000000
+#define SDR0_PFC0_GPIO_16		0x00008000
+#define SDR0_PFC0_IRQ5			0x00000000
+#define SDR0_PFC0_GPIO_17		0x00004000
+#define SDR0_PFC0_PERBE0_N		0x00000000
+#define SDR0_PFC0_GPIO_18		0x00002000
+#define SDR0_PFC0_PCI0GNT0_N		0x00000000
+#define SDR0_PFC0_GPIO_19		0x00001000
+#define SDR0_PFC0_PCI0GNT1_N		0x00000000
+#define SDR0_PFC0_GPIO_20		0x00000800
+#define SDR0_PFC0_PCI0REQ0_N		0x00000000
+#define SDR0_PFC0_GPIO_21		0x00000400
+#define SDR0_PFC0_PCI0REQ1_N		0x00000000
+#define SDR0_PFC0_GPIO_22		0x00000200
+#define SDR0_PFC0_PCI1GNT0_N		0x00000000
+#define SDR0_PFC0_GPIO_23		0x00000100
+#define SDR0_PFC0_PCI1GNT1_N		0x00000000
+#define SDR0_PFC0_GPIO_24		0x00000080
+#define SDR0_PFC0_PCI1REQ0_N		0x00000000
+#define SDR0_PFC0_GPIO_25		0x00000040
+#define SDR0_PFC0_PCI1REQ1_N		0x00000000
+#define SDR0_PFC0_GPIO_26		0x00000020
+#define SDR0_PFC0_PCI2GNT0_N		0x00000000
+#define SDR0_PFC0_GPIO_27		0x00000010
+#define SDR0_PFC0_PCI2GNT1_N		0x00000000
+#define SDR0_PFC0_GPIO_28		0x00000008
+#define SDR0_PFC0_PCI2REQ0_N		0x00000000
+#define SDR0_PFC0_GPIO_29		0x00000004
+#define SDR0_PFC0_PCI2REQ1_N		0x00000000
+#define SDR0_PFC0_GPIO_30		0x00000002
+#define SDR0_PFC0_UART1RX		0x00000000
+#define SDR0_PFC0_GPIO_31		0x00000001
+#define SDR0_PFC0_UART1TX		0x00000000
+
+#define SDR0_PFC1			0x4101
+#define SDR0_PFC1_UART1_CTS_RTS_MASK	0x02000000
+#define SDR0_PFC1_UART1_DSR_DTR		0x00000000
+#define SDR0_PFC1_UART1_CTS_RTS		0x02000000
+#define SDR0_PFC1_UART2_IN_SERVICE_MASK	0x01000000
+#define SDR0_PFC1_UART2_NOT_IN_SERVICE	0x00000000
+#define SDR0_PFC1_UART2_IN_SERVICE	0x01000000
+#define SDR0_PFC1_ETH_GIGA_MASK		0x00200000
+#define SDR0_PFC1_ETH_10_100		0x00000000
+#define SDR0_PFC1_ETH_GIGA		0x00200000
+#define SDR0_PFC1_ETH_GIGA_ENCODE(n)	((((unsigned long)(n))&0x1)<<21)
+#define SDR0_PFC1_ETH_GIGA_DECODE(n)	((((unsigned long)(n))>>21)&0x01)
+#define SDR0_PFC1_CPU_TRACE_MASK	0x00180000   /* $218C */
+#define SDR0_PFC1_CPU_NO_TRACE		0x00000000
+#define SDR0_PFC1_CPU_TRACE		0x00080000
+#define SDR0_PFC1_CPU_TRACE_ENCODE(n)	((((unsigned long)(n))&0x3)<<19)     /* $218C */
+#define SDR0_PFC1_CPU_TRACE_DECODE(n)	((((unsigned long)(n))>>19)&0x03)    /* $218C */
+
+#define SDR0_MFR			0x4300
+#endif	/* CONFIG_440SPE	*/
+
+
 #define SDR0_SDCS_SDD			(0x80000000 >> 31)
 
 #if defined(CONFIG_440GP)
@@ -1159,7 +2430,7 @@
 /*-----------------------------------------------------------------------------+
 |  Clocking
 +-----------------------------------------------------------------------------*/
-#if !defined (CONFIG_440GX) && !defined(CONFIG_440EP) && !defined(CONFIG_440GR) && !defined(CONFIG_440SP)
+#if !defined (CONFIG_440GX) && !defined(CONFIG_440EP) && !defined(CONFIG_440GR) && !defined(CONFIG_440SP) && !defined(CONFIG_440SPE)
 #define PLLSYS0_TUNE_MASK	0xffc00000	/* PLL TUNE bits	    */
 #define PLLSYS0_FB_DIV_MASK	0x003c0000	/* Feedback divisor	    */
 #define PLLSYS0_FWD_DIV_A_MASK	0x00038000	/* Forward divisor A	    */
@@ -1498,6 +2769,9 @@ typedef struct {
 	unsigned long freqOPB;
 	unsigned long freqEPB;
 	unsigned long freqPCI;
+#ifdef CONFIG_440SPE
+	unsigned long freqDDR;
+#endif
 	unsigned long pciIntArbEn;            /* Internal PCI arbiter is enabled */
 	unsigned long pciClkSync;             /* PCI clock is synchronous        */
 } PPC440_SYS_INFO;
diff --git a/include/ppc4xx_enet.h b/include/ppc4xx_enet.h
index d6d33b6957..ec2e3629bb 100644
--- a/include/ppc4xx_enet.h
+++ b/include/ppc4xx_enet.h
@@ -133,12 +133,21 @@ typedef struct emac_4xx_hw_st {
 #define EMAC_NUM_DEV	    4
 #elif (defined(CONFIG_440) || defined(CONFIG_405EP)) &&	\
 	defined(CONFIG_NET_MULTI) &&			\
-	!defined(CONFIG_440SP)
+	!defined(CONFIG_440SP) && !defined(CONFIG_440SPE)
 #define EMAC_NUM_DEV	    2
 #else
 #define EMAC_NUM_DEV	    1
 #endif
 
+#ifdef CONFIG_IBM_EMAC4_V4	/* EMAC4 V4 changed bit setting */
+#define EMAC_STACR_OC_MASK	(0x00008000)
+#else
+#define EMAC_STACR_OC_MASK	(0x00000000)
+#endif
+
+#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
+#define SDR0_PFC1_EM_1000	(0x00200000)
+#endif
 
 /*ZMII Bridge Register addresses */
 #if defined(CONFIG_440EP) || defined(CONFIG_440GR)
@@ -323,7 +332,7 @@ typedef struct emac_4xx_hw_st {
 #define EMAC_M0_WKE			    (0x04000000)
 
 /* on 440GX EMAC_MR1 has a different layout! */
-#if defined(CONFIG_440GX) || defined(CONFIG_440SP)
+#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
 /* MODE Reg 1 */
 #define EMAC_M1_FDE		(0x80000000)
 #define EMAC_M1_ILE		(0x40000000)
@@ -424,8 +433,21 @@ typedef struct emac_4xx_hw_st {
 /* STA CONTROL REG */
 #define EMAC_STACR_OC			(0x00008000)
 #define EMAC_STACR_PHYE			(0x00004000)
+
+#ifdef CONFIG_IBM_EMAC4_V4	/* EMAC4 V4 changed bit setting */
+#define EMAC_STACR_INDIRECT_MODE	(0x00002000)
+#define EMAC_STACR_WRITE		(0x00000800) /* $BUC */
+#define EMAC_STACR_READ			(0x00001000) /* $BUC */
+#define EMAC_STACR_OP_MASK		(0x00001800)
+#define EMAC_STACR_MDIO_ADDR		(0x00000000)
+#define EMAC_STACR_MDIO_WRITE		(0x00000800)
+#define EMAC_STACR_MDIO_READ		(0x00001800)
+#define EMAC_STACR_MDIO_READ_INC	(0x00001000)
+#else
 #define EMAC_STACR_WRITE		(0x00002000)
 #define EMAC_STACR_READ			(0x00001000)
+#endif
+
 #define EMAC_STACR_CLK_83MHZ	(0x00000800)  /* 0's for 50Mhz */
 #define EMAC_STACR_CLK_66MHZ	(0x00000400)
 #define EMAC_STACR_CLK_100MHZ	(0x00000C00)
diff --git a/include/s3c2400.h b/include/s3c2400.h
index bc1f1e94bf..4fdc62ec11 100644
--- a/include/s3c2400.h
+++ b/include/s3c2400.h
@@ -63,71 +63,71 @@ typedef enum {
 #include <s3c24x0.h>
 
 
-static inline S3C24X0_MEMCTL * const S3C24X0_GetBase_MEMCTL(void)
+static inline S3C24X0_MEMCTL * S3C24X0_GetBase_MEMCTL(void)
 {
 	return (S3C24X0_MEMCTL * const)S3C24X0_MEMCTL_BASE;
 }
-static inline S3C24X0_USB_HOST * const S3C24X0_GetBase_USB_HOST(void)
+static inline S3C24X0_USB_HOST * S3C24X0_GetBase_USB_HOST(void)
 {
 	return (S3C24X0_USB_HOST * const)S3C24X0_USB_HOST_BASE;
 }
-static inline S3C24X0_INTERRUPT * const S3C24X0_GetBase_INTERRUPT(void)
+static inline S3C24X0_INTERRUPT * S3C24X0_GetBase_INTERRUPT(void)
 {
 	return (S3C24X0_INTERRUPT * const)S3C24X0_INTERRUPT_BASE;
 }
-static inline S3C24X0_DMAS * const S3C24X0_GetBase_DMAS(void)
+static inline S3C24X0_DMAS * S3C24X0_GetBase_DMAS(void)
 {
 	return (S3C24X0_DMAS * const)S3C24X0_DMA_BASE;
 }
-static inline S3C24X0_CLOCK_POWER * const S3C24X0_GetBase_CLOCK_POWER(void)
+static inline S3C24X0_CLOCK_POWER * S3C24X0_GetBase_CLOCK_POWER(void)
 {
 	return (S3C24X0_CLOCK_POWER * const)S3C24X0_CLOCK_POWER_BASE;
 }
-static inline S3C24X0_LCD * const S3C24X0_GetBase_LCD(void)
+static inline S3C24X0_LCD * S3C24X0_GetBase_LCD(void)
 {
 	return (S3C24X0_LCD * const)S3C24X0_LCD_BASE;
 }
-static inline S3C24X0_UART * const S3C24X0_GetBase_UART(S3C24X0_UARTS_NR nr)
+static inline S3C24X0_UART * S3C24X0_GetBase_UART(S3C24X0_UARTS_NR nr)
 {
 	return (S3C24X0_UART * const)(S3C24X0_UART_BASE + (nr * 0x4000));
 }
-static inline S3C24X0_TIMERS * const S3C24X0_GetBase_TIMERS(void)
+static inline S3C24X0_TIMERS * S3C24X0_GetBase_TIMERS(void)
 {
 	return (S3C24X0_TIMERS * const)S3C24X0_TIMER_BASE;
 }
-static inline S3C24X0_USB_DEVICE * const S3C24X0_GetBase_USB_DEVICE(void)
+static inline S3C24X0_USB_DEVICE * S3C24X0_GetBase_USB_DEVICE(void)
 {
 	return (S3C24X0_USB_DEVICE * const)S3C24X0_USB_DEVICE_BASE;
 }
-static inline S3C24X0_WATCHDOG * const S3C24X0_GetBase_WATCHDOG(void)
+static inline S3C24X0_WATCHDOG * S3C24X0_GetBase_WATCHDOG(void)
 {
 	return (S3C24X0_WATCHDOG * const)S3C24X0_WATCHDOG_BASE;
 }
-static inline S3C24X0_I2C * const S3C24X0_GetBase_I2C(void)
+static inline S3C24X0_I2C * S3C24X0_GetBase_I2C(void)
 {
 	return (S3C24X0_I2C * const)S3C24X0_I2C_BASE;
 }
-static inline S3C24X0_I2S * const S3C24X0_GetBase_I2S(void)
+static inline S3C24X0_I2S * S3C24X0_GetBase_I2S(void)
 {
 	return (S3C24X0_I2S * const)S3C24X0_I2S_BASE;
 }
-static inline S3C24X0_GPIO * const S3C24X0_GetBase_GPIO(void)
+static inline S3C24X0_GPIO * S3C24X0_GetBase_GPIO(void)
 {
 	return (S3C24X0_GPIO * const)S3C24X0_GPIO_BASE;
 }
-static inline S3C24X0_RTC * const S3C24X0_GetBase_RTC(void)
+static inline S3C24X0_RTC * S3C24X0_GetBase_RTC(void)
 {
 	return (S3C24X0_RTC * const)S3C24X0_RTC_BASE;
 }
-static inline S3C2400_ADC * const S3C2400_GetBase_ADC(void)
+static inline S3C2400_ADC * S3C2400_GetBase_ADC(void)
 {
 	return (S3C2400_ADC * const)S3C24X0_ADC_BASE;
 }
-static inline S3C24X0_SPI * const S3C24X0_GetBase_SPI(void)
+static inline S3C24X0_SPI * S3C24X0_GetBase_SPI(void)
 {
 	return (S3C24X0_SPI * const)S3C24X0_SPI_BASE;
 }
-static inline S3C2400_MMC * const S3C2400_GetBase_MMC(void)
+static inline S3C2400_MMC * S3C2400_GetBase_MMC(void)
 {
 	return (S3C2400_MMC * const)S3C2400_MMC_BASE;
 }
diff --git a/include/serial.h b/include/serial.h
index c8abb72e1f..8c7b1c26c1 100644
--- a/include/serial.h
+++ b/include/serial.h
@@ -23,7 +23,7 @@ extern struct serial_device serial_scc_device;
 extern struct serial_device * default_serial_console (void);
 
 #if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_440) \
-   || defined(CONFIG_405EP)
+   || defined(CONFIG_405EP) || defined(CONFIG_MPC5xxx)
 extern struct serial_device serial0_device;
 extern struct serial_device serial1_device;
 #endif
diff --git a/include/usb.h b/include/usb.h
index 39d7f23cc7..bf71554041 100644
--- a/include/usb.h
+++ b/include/usb.h
@@ -108,6 +108,7 @@ struct usb_interface_descriptor {
 	unsigned char  iInterface;
 
 	unsigned char  no_of_ep;
+	unsigned char  num_altsetting;
 	unsigned char  act_altsetting;
 	struct usb_endpoint_descriptor ep_desc[USB_MAXENDPOINTS];
 } __attribute__ ((packed));
diff --git a/include/xyzModem.h b/include/xyzModem.h
index 4ec10b5a37..f437bbd0bd 100644
--- a/include/xyzModem.h
+++ b/include/xyzModem.h
@@ -97,7 +97,10 @@ typedef struct {
 #endif
 } connection_info_t;
 
+#ifndef	BOOL_WAS_DEFINED
+#define BOOL_WAS_DEFINED
 typedef unsigned int bool;
+#endif
 
 #define false 0
 #define true 1
diff --git a/lib_i386/i386_linux.c b/lib_i386/i386_linux.c
index e5d8eea4b8..b4a6f5a3cd 100644
--- a/lib_i386/i386_linux.c
+++ b/lib_i386/i386_linux.c
@@ -151,6 +151,12 @@ void do_bootm_linux(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[],
 		initrd_end = 0;
 	}
 
+	/* if multi-part image, we need to advance base ptr */
+	if ((hdr->ih_type==IH_TYPE_MULTI) && (len_ptr[1])) {
+		int i;
+		for (i=0, addr+=sizeof(int); len_ptr[i++]; addr+=sizeof(int));
+	}
+
 	base_ptr = load_zimage((void*)addr + sizeof(image_header_t), ntohl(hdr->ih_size),
 			       initrd_start, initrd_end-initrd_start, 0);
 
diff --git a/lib_nios2/board.c b/lib_nios2/board.c
index cd23037771..7ffb3f019b 100644
--- a/lib_nios2/board.c
+++ b/lib_nios2/board.c
@@ -31,6 +31,9 @@
 #ifdef CONFIG_STATUS_LED
 #include <status_led.h>
 #endif
+#if defined(CFG_NIOS_EPCSBASE)
+#include <nios2-epcs.h>
+#endif
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -93,6 +96,9 @@ init_fnc_t *init_sequence[] = {
 #if defined(CONFIG_BOARD_EARLY_INIT_F)
 	board_early_init_f,	/* Call board-specific init code early.*/
 #endif
+#if defined(CFG_NIOS_EPCSBASE)
+	epcs_reset,
+#endif
 
 	env_init,
 	serial_init,
@@ -165,6 +171,10 @@ void board_init (void)
 	WATCHDOG_RESET ();
 	interrupt_init ();
 
+#if defined(CONFIG_BOARD_LATE_INIT)
+	board_late_init ();
+#endif
+
 	/* main_loop */
 	for (;;) {
 		WATCHDOG_RESET ();
diff --git a/lib_ppc/board.c b/lib_ppc/board.c
index 2c29f467ec..039053aabd 100644
--- a/lib_ppc/board.c
+++ b/lib_ppc/board.c
@@ -270,7 +270,8 @@ init_fnc_t *init_sequence[] = {
 
 #if !defined(CONFIG_8xx_CPUCLK_DEFAULT)
 	get_clocks,		/* get CPU and bus clocks (etc.) */
-#if defined(CONFIG_TQM8xxL) && !defined(CONFIG_TQM866M)
+#if defined(CONFIG_TQM8xxL) && !defined(CONFIG_TQM866M) \
+    && !defined(CONFIG_TQM885D)
 	adjust_sdram_tbs_8xx,
 #endif
 	init_timebase,
@@ -610,6 +611,11 @@ void board_init_r (gd_t *id, ulong dest_addr)
 	bd = gd->bd;
 
 	gd->flags |= GD_FLG_RELOC;	/* tell others: relocation done */
+	gd->reloc_off = dest_addr - CFG_MONITOR_BASE;
+
+#ifdef CONFIG_SERIAL_MULTI
+	serial_initialize();
+#endif
 
 	debug ("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
 
@@ -619,14 +625,8 @@ void board_init_r (gd_t *id, ulong dest_addr)
 	board_early_init_r ();
 #endif
 
-	gd->reloc_off = dest_addr - CFG_MONITOR_BASE;
-
 	monitor_flash_len = (ulong)&__init_end - dest_addr;
 
-#ifdef CONFIG_SERIAL_MULTI
-	serial_initialize();
-#endif
-
 	/*
 	 * We have to relocate the command table manually
 	 */
diff --git a/mkconfig b/mkconfig
index 54775d31df..4fe6e448be 100755
--- a/mkconfig
+++ b/mkconfig
@@ -9,19 +9,23 @@
 #
 
 APPEND=no	# Default: Create new config file
+BOARD_NAME=""	# Name to print in make output
 
 while [ $# -gt 0 ] ; do
 	case "$1" in
 	--) shift ; break ;;
 	-a) shift ; APPEND=yes ;;
+	-n) shift ; BOARD_NAME="${1%%_config}" ; shift ;;
 	*)  break ;;
 	esac
 done
 
+[ "${BOARD_NAME}" ] || BOARD_NAME="$1"
+
 [ $# -lt 4 ] && exit 1
 [ $# -gt 6 ] && exit 1
 
-echo "Configuring for $1 board..."
+echo "Configuring for ${BOARD_NAME} board..."
 
 cd ./include
 
diff --git a/nios2_config.mk b/nios2_config.mk
index 03253a364f..3f23b56c93 100644
--- a/nios2_config.mk
+++ b/nios2_config.mk
@@ -23,4 +23,4 @@
 #
 
 PLATFORM_CPPFLAGS += -DCONFIG_NIOS2 -D__NIOS2__
-PLATFORM_CPPFLAGS += -ffixed-r15
+PLATFORM_CPPFLAGS += -ffixed-r15 -G0