powerpc: keymile: Add a check for the PIGGY debug board

Check the presence of the PIGGY on the keymile boards mgcoge,
mgsuvd and kmeter1. If the PIGGY is not present, dont register
this Ethernet device.

Signed-off-by: Heiko Schocher <hs@denx.de>
Acked-by: Ben Warren <biggerbadderben@gmail.com>

9 files changed, 92 insertions, 10 deletions

diff --git a/board/keymile/common/common.c b/board/keymile/common/common.c
index a4cf24cf72..1338950814 100644
--- a/board/keymile/common/common.c
+++ b/board/keymile/common/common.c
@@ -22,10 +22,14 @@
  */
 
 #include <common.h>
+#if defined(CONFIG_MGCOGE)
 #include <mpc8260.h>
+#endif
 #include <ioports.h>
 #include <malloc.h>
 #include <hush.h>
+#include <net.h>
+#include <asm/io.h>
 
 #if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
 #include <libfdt.h>
@@ -33,8 +37,6 @@
 
 #if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
 #include <i2c.h>
-#endif
-#include <asm/io.h>
 
 extern int i2c_soft_read_pin (void);
 
@@ -495,6 +497,7 @@ void i2c_init_board(void)
 #endif
 }
 #endif
+#endif
 
 #if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
 int fdt_set_node_and_value (void *blob,
@@ -521,3 +524,19 @@ int fdt_set_node_and_value (void *blob,
 	return ret;
 }
 #endif
+
+int ethernet_present (void)
+{
+	return (in_8((u8 *)CONFIG_SYS_PIGGY_BASE + CONFIG_SYS_SLOT_ID_OFF) & 0x80);
+}
+
+int board_eth_init (bd_t *bis)
+{
+#ifdef CONFIG_KEYMILE_HDLC_ENET
+	(void)keymile_hdlc_enet_initialize (bis);
+#endif
+	if (ethernet_present ()) {
+		return -1;
+	}
+	return 0;
+}
diff --git a/board/keymile/common/common.h b/board/keymile/common/common.h
new file mode 100644
index 0000000000..d3d681424f
--- /dev/null
+++ b/board/keymile/common/common.h
@@ -0,0 +1,20 @@
+/*
+ * (C) Copyright 2008
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#ifndef __KEYMILE_COMMON_H
+#define __KEYMILE_COMMON_H
+
+int ethernet_present (void);
+int ivm_read_eeprom (void);
+
+#ifdef CONFIG_KEYMILE_HDLC_ENET
+int keymile_hdlc_enet_initialize (bd_t *bis);
+#endif
+#endif /* __KEYMILE_COMMON_H */
diff --git a/board/keymile/kmeter1/Makefile b/board/keymile/kmeter1/Makefile
index 88b79f3f0f..12a1518ff1 100644
--- a/board/keymile/kmeter1/Makefile
+++ b/board/keymile/kmeter1/Makefile
@@ -22,12 +22,14 @@
 #
 
 include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS-y += $(BOARD).o
+COBJS	+= $(BOARD).o ../common/common.o
 
-COBJS	:= $(COBJS-y)
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
 SOBJS	:= $(addprefix $(obj),$(SOBJS))
diff --git a/board/keymile/kmeter1/kmeter1.c b/board/keymile/kmeter1/kmeter1.c
index f9a59a6443..f04a57a9cc 100644
--- a/board/keymile/kmeter1/kmeter1.c
+++ b/board/keymile/kmeter1/kmeter1.c
@@ -27,6 +27,8 @@
 #include <pci.h>
 #include <libfdt.h>
 
+#include "../common/common.h"
+
 const qe_iop_conf_t qe_iop_conf_tab[] = {
 	/* port pin dir open_drain assign */
 
@@ -141,7 +143,10 @@ phys_size_t initdram (int board_type)
 
 int checkboard (void)
 {
-	puts ("Board: Keymile kmeter1\n");
+	puts ("Board: Keymile kmeter1");
+	if (ethernet_present ())
+		puts (" with PIGGY.");
+	puts ("\n");
 	return 0;
 }
 
diff --git a/board/keymile/mgcoge/mgcoge.c b/board/keymile/mgcoge/mgcoge.c
index 3683417f5c..5c50739644 100644
--- a/board/keymile/mgcoge/mgcoge.c
+++ b/board/keymile/mgcoge/mgcoge.c
@@ -25,6 +25,7 @@
 #include <mpc8260.h>
 #include <ioports.h>
 #include <malloc.h>
+#include <net.h>
 #include <asm/io.h>
 
 #if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
@@ -35,7 +36,8 @@
 #include <i2c.h>
 #endif
 
-extern int ivm_read_eeprom (void);
+#include "../common/common.h"
+
 /*
  * I/O Port configuration table
  *
@@ -285,8 +287,10 @@ phys_size_t initdram (int board_type)
 
 int checkboard(void)
 {
-	puts ("Board: mgcoge\n");
-
+	puts ("Board: Keymile mgcoge");
+	if (ethernet_present ())
+		puts (" with PIGGY.");
+	puts ("\n");
 	return 0;
 }
 
diff --git a/board/keymile/mgsuvd/mgsuvd.c b/board/keymile/mgsuvd/mgsuvd.c
index 3726acf4a1..02baf622ee 100644
--- a/board/keymile/mgsuvd/mgsuvd.c
+++ b/board/keymile/mgsuvd/mgsuvd.c
@@ -22,13 +22,14 @@
  */
 #include <common.h>
 #include <mpc8xx.h>
+#include <net.h>
 #include <asm/io.h>
 
 #if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
 #include <libfdt.h>
 #endif
 
-extern int ivm_read_eeprom (void);
+#include "../common/common.h"
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -60,7 +61,10 @@ const uint sdram_table[] =
 
 int checkboard (void)
 {
-	puts ("Board: Keymile mgsuvd\n");
+	puts ("Board: Keymile mgsuvd");
+	if (ethernet_present ())
+		puts (" with PIGGY.");
+	puts ("\n");
 	return (0);
 }
 
diff --git a/include/configs/kmeter1.h b/include/configs/kmeter1.h
index e105c3bd2a..7a63a4189f 100644
--- a/include/configs/kmeter1.h
+++ b/include/configs/kmeter1.h
@@ -314,6 +314,15 @@
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
 
 /*
+ * How to get access to the slot ID.  Put this here to make it easy
+ * to modify in a centralized location.  This is used in the HDLC
+ * driver to set the MAC.
+*/
+#define CONFIG_SYS_SLOT_ID_BASE		CONFIG_SYS_PIGGY_BASE
+#define CONFIG_SYS_SLOT_ID_OFF		(0x07)	/* register offset */
+#define CONFIG_SYS_SLOT_ID_MASK		(0x3f)	/* mask for slot ID bits */
+
+/*
  * BOOTP options
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
diff --git a/include/configs/mgcoge.h b/include/configs/mgcoge.h
index dc9b311d43..31428ea09f 100644
--- a/include/configs/mgcoge.h
+++ b/include/configs/mgcoge.h
@@ -400,4 +400,14 @@
 #define OF_TBCLK		(bd->bi_busfreq / 4)
 #define OF_STDOUT_PATH		"/soc/cpm/serial@11a90"
 
+/*
+ * How to get access to the slot ID.  Put this here to make it easy
+ * to modify in a centralized location.  This is used in the HDLC
+ * driver to set the MAC.
+*/
+#define CONFIG_SYS_SLOT_ID_BASE		CONFIG_SYS_PIGGY_BASE
+#define CONFIG_SYS_SLOT_ID_OFF		(0x07)	/* register offset */
+#define CONFIG_SYS_SLOT_ID_MASK		(0x3f)	/* mask for slot ID bits */
+
+
 #endif /* __CONFIG_H */
diff --git a/include/configs/mgsuvd.h b/include/configs/mgsuvd.h
index fca2e55134..b862130ae6 100644
--- a/include/configs/mgsuvd.h
+++ b/include/configs/mgsuvd.h
@@ -211,6 +211,15 @@
 #define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET+CONFIG_ENV_SECT_SIZE)
 #define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 
+/*
+ * How to get access to the slot ID.  Put this here to make it easy
+ * to modify in a centralized location.  This is used in the HDLC
+ * driver to set the MAC.
+*/
+#define CONFIG_SYS_SLOT_ID_BASE		CONFIG_SYS_PIGGY_BASE
+#define CONFIG_SYS_SLOT_ID_OFF		(0x07)	/* register offset */
+#define CONFIG_SYS_SLOT_ID_MASK		(0x3f)	/* mask for slot ID bits */
+
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */