Merge branch 'master' of git://git.denx.de/u-boot-ppc4xx

11 files changed, 867 insertions, 3 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index a5d5835d62..00e06b7c2c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -368,6 +368,7 @@ Stefan Roese <sr@denx.de>
 	ebony		PPC440GP
 	glacier		PPC460GT
 	haleakala	PPC405EXr
+	icon		PPC440SPe
 	katmai		PPC440SPe
 	kilauea		PPC405EX
 	lwmon5		PPC440EPx
diff --git a/MAKEALL b/MAKEALL
index 34bc4a171b..71ae6180e4 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -186,6 +186,7 @@ LIST_4xx="		\
 	ADCIOP		\
 	alpr		\
 	AP1000		\
+	APC405		\
 	AR405		\
 	arches		\
 	ASH405		\
@@ -223,6 +224,7 @@ LIST_4xx="		\
 	hcu5		\
 	HH405		\
 	HUB405		\
+	icon		\
 	intip		\
 	JSE		\
 	KAREF		\
diff --git a/Makefile b/Makefile
index 25e3b8c51c..5fcbbb24e0 100644
--- a/Makefile
+++ b/Makefile
@@ -1357,6 +1357,9 @@ HH405_config:	unconfig
 HUB405_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) powerpc ppc4xx hub405 esd
 
+icon_config:	unconfig
+	@$(MKCONFIG) $(@:_config=) powerpc ppc4xx icon mosaixtech
+
 # Compact-Center(codename intip) & DevCon-Center use different U-Boot images
 intip_config \
 devconcenter_config:	unconfig
diff --git a/board/korat/korat.c b/board/korat/korat.c
index d5260dc232..e5ec694702 100644
--- a/board/korat/korat.c
+++ b/board/korat/korat.c
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2007-2009
+ * (C) Copyright 2007-2010
  * Larry Johnson, lrj@acm.org
  *
  * (C) Copyright 2006-2007
@@ -417,7 +417,7 @@ int misc_init_r(void)
 		 * then connect the CompactFlash controller to the PowerPC USB
 		 * port.
 		 */
-		printf("Attaching CompactFalsh controller to PPC USB\n");
+		printf("Attaching CompactFlash controller to PPC USB\n");
 		out_8((u8 *) CONFIG_SYS_CPLD_BASE + 0x02,
 		      in_8((u8 *) CONFIG_SYS_CPLD_BASE + 0x02) | 0x10);
 	} else {
@@ -425,7 +425,7 @@ int misc_init_r(void)
 			printf("Warning: \"korat_usbcf\" is not set to a legal "
 			       "value (\"ppc\" or \"pci\")\n");
 
-		printf("Attaching CompactFalsh controller to PCI USB\n");
+		printf("Attaching CompactFlash controller to PCI USB\n");
 	}
 	if (act == NULL || strcmp(act, "hostdev") == 0) {
 		/* SDR Setting */
diff --git a/board/mosaixtech/icon/Makefile b/board/mosaixtech/icon/Makefile
new file mode 100644
index 0000000000..dad0457f6b
--- /dev/null
+++ b/board/mosaixtech/icon/Makefile
@@ -0,0 +1,53 @@
+#
+# (C) Copyright 2009-2010
+# Stefan Roese, DENX Software Engineering, sr@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS-y	:= $(BOARD).o
+COBJS-$(CONFIG_CMD_CHIP_CONFIG) += chip_config.o
+SOBJS	= init.o
+
+COBJS   := $(COBJS-y)
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/mosaixtech/icon/chip_config.c b/board/mosaixtech/icon/chip_config.c
new file mode 100644
index 0000000000..b9dd447245
--- /dev/null
+++ b/board/mosaixtech/icon/chip_config.c
@@ -0,0 +1,55 @@
+/*
+ * (C) Copyright 2009-2010
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <asm/ppc4xx_config.h>
+
+struct ppc4xx_config ppc4xx_config_val[] = {
+	{
+		"400-133", "CPU: 400 PLB: 133 OPB:  66 EBC:  66",
+		{ 0x86, 0x78, 0xc2, 0xc6, 0x05, 0xa5, 0x04, 0xe1 }
+	},
+	{
+		"500-166", "CPU: 500 PLB: 166 OPB:  83 EBC:  83",
+		{ 0x87, 0x78, 0xf2, 0xc6, 0x05, 0xa5, 0x04, 0xe1 }
+	},
+	{
+		"533-133", "CPU: 533 PLB: 133 OPB:  66 EBC:  66",
+		{ 0x87, 0x79, 0x02, 0x52, 0x05, 0xa5, 0x04, 0xe1 }
+	},
+	{
+		"667-133", "CPU: 667 PLB: 133 OPB:  66 EBC:  66",
+		{ 0x87, 0x79, 0x42, 0x56, 0x05, 0xa5, 0x04, 0xe1 }
+	},
+	{
+		"667-166", "CPU: 667 PLB: 166 OPB:  83 EBC:  83",
+		{ 0x87, 0x79, 0x42, 0x06, 0x05, 0xa5, 0x04, 0xe1 }
+	},
+	{
+		"800-160", "CPU: 800 PLB: 160 OPB:  53 EBC:  17",
+		{ 0x86, 0x79, 0x81, 0xa7, 0x07, 0xa5, 0x04, 0xe1 }
+	},
+};
+
+int ppc4xx_config_count = ARRAY_SIZE(ppc4xx_config_val);
diff --git a/board/mosaixtech/icon/config.mk b/board/mosaixtech/icon/config.mk
new file mode 100644
index 0000000000..b2748cecce
--- /dev/null
+++ b/board/mosaixtech/icon/config.mk
@@ -0,0 +1,34 @@
+#
+# (C) Copyright 2009-2010
+# Stefan Roese, DENX Software Engineering, sr@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+TEXT_BASE = 0xFFFA0000
+
+PLATFORM_CPPFLAGS += -DCONFIG_440=1
+
+ifeq ($(debug),1)
+PLATFORM_CPPFLAGS += -DDEBUG
+endif
+
+ifeq ($(dbcr),1)
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
+endif
diff --git a/board/mosaixtech/icon/icon.c b/board/mosaixtech/icon/icon.c
new file mode 100644
index 0000000000..fbace9efe9
--- /dev/null
+++ b/board/mosaixtech/icon/icon.c
@@ -0,0 +1,319 @@
+/*
+ * (C) Copyright 2009-2010
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <i2c.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <netdev.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+#include <asm/4xx_pcie.h>
+#include <asm/errno.h>
+#include <asm/mmu.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_early_init_f(void)
+{
+	unsigned long mfr;
+
+	/*
+	 * Interrupt controller setup for the ICON 440SPe board.
+	 *
+	 *--------------------------------------------------------------------
+	 * IRQ    | Source                            | Pol.  | Sensi.| Crit.
+	 *--------+-----------------------------------+-------+-------+-------
+	 * IRQ 00 | UART0                             | High  | Level | Non
+	 * IRQ 01 | UART1                             | High  | Level | Non
+	 * IRQ 02 | IIC0                              | High  | Level | Non
+	 * IRQ 03 | IIC1                              | High  | Level | Non
+	 * IRQ 04 | PCI0X0 MSG IN                     | High  | Level | Non
+	 * IRQ 05 | PCI0X0 CMD Write                  | High  | Level | Non
+	 * IRQ 06 | PCI0X0 Power Mgt                  | High  | Level | Non
+	 * IRQ 07 | PCI0X0 VPD Access                 | Rising| Edge  | Non
+	 * IRQ 08 | PCI0X0 MSI level 0                | High  | Lvl/ed| Non
+	 * IRQ 09 | External IRQ 15 - (PCI-Express)   | pgm H | Pgm   | Non
+	 * IRQ 10 | UIC2 Non-critical Int.            | NA    | NA    | Non
+	 * IRQ 11 | UIC2 Critical Interrupt           | NA    | NA    | Crit
+	 * IRQ 12 | PCI Express MSI Level 0           | Rising| Edge  | Non
+	 * IRQ 13 | PCI Express MSI Level 1           | Rising| Edge  | Non
+	 * IRQ 14 | PCI Express MSI Level 2           | Rising| Edge  | Non
+	 * IRQ 15 | PCI Express MSI Level 3           | Rising| Edge  | Non
+	 * IRQ 16 | UIC3 Non-critical Int.            | NA    | NA    | Non
+	 * IRQ 17 | UIC3 Critical Interrupt           | NA    | NA    | Crit
+	 * IRQ 18 | External IRQ 14 - (PCI-Express)   | Pgm   | Pgm   | Non
+	 * IRQ 19 | DMA Channel 0 FIFO Full           | High  | Level | Non
+	 * IRQ 20 | DMA Channel 0 Stat FIFO           | High  | Level | Non
+	 * IRQ 21 | DMA Channel 1 FIFO Full           | High  | Level | Non
+	 * IRQ 22 | DMA Channel 1 Stat FIFO           | High  | Level | Non
+	 * IRQ 23 | I2O Inbound Doorbell              | High  | Level | Non
+	 * IRQ 24 | Inbound Post List FIFO Not Empt   | High  | Level | Non
+	 * IRQ 25 | I2O Region 0 LL PLB Write         | High  | Level | Non
+	 * IRQ 26 | I2O Region 1 LL PLB Write         | High  | Level | Non
+	 * IRQ 27 | I2O Region 0 HB PLB Write         | High  | Level | Non
+	 * IRQ 28 | I2O Region 1 HB PLB Write         | High  | Level | Non
+	 * IRQ 29 | GPT Down Count Timer              | Rising| Edge  | Non
+	 * IRQ 30 | UIC1 Non-critical Int.            | NA    | NA    | Non
+	 * IRQ 31 | UIC1 Critical Interrupt           | NA    | NA    | Crit.
+	 *--------------------------------------------------------------------
+	 * IRQ 32 | Ext. IRQ 13 - (PCI-Express)       |pgm (H)|pgm/Lvl| Non
+	 * IRQ 33 | MAL Serr                          | High  | Level | Non
+	 * IRQ 34 | MAL Txde                          | High  | Level | Non
+	 * IRQ 35 | MAL Rxde                          | High  | Level | Non
+	 * IRQ 36 | DMC CE or DMC UE                  | High  | Level | Non
+	 * IRQ 37 | EBC or UART2                      | High  |Lvl Edg| Non
+	 * IRQ 38 | MAL TX EOB                        | High  | Level | Non
+	 * IRQ 39 | MAL RX EOB                        | High  | Level | Non
+	 * IRQ 40 | PCIX0 MSI Level 1                 | High  |Lvl Edg| Non
+	 * IRQ 41 | PCIX0 MSI level 2                 | High  |Lvl Edg| Non
+	 * IRQ 42 | PCIX0 MSI level 3                 | High  |Lvl Edg| Non
+	 * IRQ 43 | L2 Cache                          | Risin | Edge  | Non
+	 * IRQ 44 | GPT Compare Timer 0               | Risin | Edge  | Non
+	 * IRQ 45 | GPT Compare Timer 1               | Risin | Edge  | Non
+	 * IRQ 46 | GPT Compare Timer 2               | Risin | Edge  | Non
+	 * IRQ 47 | GPT Compare Timer 3               | Risin | Edge  | Non
+	 * IRQ 48 | GPT Compare Timer 4               | Risin | Edge  | Non
+	 * IRQ 49 | Ext. IRQ 12 - PCI-X               |pgm/Fal|pgm/Lvl| Non
+	 * IRQ 50 | Ext. IRQ 11 -                     |pgm (H)|pgm/Lvl| Non
+	 * IRQ 51 | Ext. IRQ 10 -                     |pgm (H)|pgm/Lvl| Non
+	 * IRQ 52 | Ext. IRQ 9                        |pgm (H)|pgm/Lvl| Non
+	 * IRQ 53 | Ext. IRQ 8                        |pgm (H)|pgm/Lvl| Non
+	 * IRQ 54 | DMA Error                         | High  | Level | Non
+	 * IRQ 55 | DMA I2O Error                     | High  | Level | Non
+	 * IRQ 56 | Serial ROM                        | High  | Level | Non
+	 * IRQ 57 | PCIX0 Error                       | High  | Edge  | Non
+	 * IRQ 58 | Ext. IRQ 7-                       |pgm (H)|pgm/Lvl| Non
+	 * IRQ 59 | Ext. IRQ 6-                       |pgm (H)|pgm/Lvl| Non
+	 * IRQ 60 | EMAC0 Interrupt                   | High  | Level | Non
+	 * IRQ 61 | EMAC0 Wake-up                     | High  | Level | Non
+	 * IRQ 62 | Reserved                          | High  | Level | Non
+	 * IRQ 63 | XOR                               | High  | Level | Non
+	 *--------------------------------------------------------------------
+	 * IRQ 64 | PE0 AL                            | High  | Level | Non
+	 * IRQ 65 | PE0 VPD Access                    | Risin | Edge  | Non
+	 * IRQ 66 | PE0 Hot Reset Request             | Risin | Edge  | Non
+	 * IRQ 67 | PE0 Hot Reset Request             | Falli | Edge  | Non
+	 * IRQ 68 | PE0 TCR                           | High  | Level | Non
+	 * IRQ 69 | PE0 BusMaster VCO                 | Falli | Edge  | Non
+	 * IRQ 70 | PE0 DCR Error                     | High  | Level | Non
+	 * IRQ 71 | Reserved                          | N/A   | N/A   | Non
+	 * IRQ 72 | PE1 AL                            | High  | Level | Non
+	 * IRQ 73 | PE1 VPD Access                    | Risin | Edge  | Non
+	 * IRQ 74 | PE1 Hot Reset Request             | Risin | Edge  | Non
+	 * IRQ 75 | PE1 Hot Reset Request             | Falli | Edge  | Non
+	 * IRQ 76 | PE1 TCR                           | High  | Level | Non
+	 * IRQ 77 | PE1 BusMaster VCO                 | Falli | Edge  | Non
+	 * IRQ 78 | PE1 DCR Error                     | High  | Level | Non
+	 * IRQ 79 | Reserved                          | N/A   | N/A   | Non
+	 * IRQ 80 | PE2 AL                            | High  | Level | Non
+	 * IRQ 81 | PE2 VPD Access                    | Risin | Edge  | Non
+	 * IRQ 82 | PE2 Hot Reset Request             | Risin | Edge  | Non
+	 * IRQ 83 | PE2 Hot Reset Request             | Falli | Edge  | Non
+	 * IRQ 84 | PE2 TCR                           | High  | Level | Non
+	 * IRQ 85 | PE2 BusMaster VCO                 | Falli | Edge  | Non
+	 * IRQ 86 | PE2 DCR Error                     | High  | Level | Non
+	 * IRQ 87 | Reserved                          | N/A   | N/A   | Non
+	 * IRQ 88 | External IRQ(5)                   | Progr | Progr | Non
+	 * IRQ 89 | External IRQ 4 - Ethernet         | Progr | Progr | Non
+	 * IRQ 90 | External IRQ 3 - PCI-X            | Progr | Progr | Non
+	 * IRQ 91 | External IRQ 2 - PCI-X            | Progr | Progr | Non
+	 * IRQ 92 | External IRQ 1 - PCI-X            | Progr | Progr | Non
+	 * IRQ 93 | External IRQ 0 - PCI-X            | Progr | Progr | Non
+	 * IRQ 94 | Reserved                          | N/A   | N/A   | Non
+	 * IRQ 95 | Reserved                          | N/A   | N/A   | Non
+	 *--------------------------------------------------------------------
+	 * IRQ 96 | PE0 INTA                          | High  | Level | Non
+	 * IRQ 97 | PE0 INTB                          | High  | Level | Non
+	 * IRQ 98 | PE0 INTC                          | High  | Level | Non
+	 * IRQ 99 | PE0 INTD                          | High  | Level | Non
+	 * IRQ 100| PE1 INTA                          | High  | Level | Non
+	 * IRQ 101| PE1 INTB                          | High  | Level | Non
+	 * IRQ 102| PE1 INTC                          | High  | Level | Non
+	 * IRQ 103| PE1 INTD                          | High  | Level | Non
+	 * IRQ 104| PE2 INTA                          | High  | Level | Non
+	 * IRQ 105| PE2 INTB                          | High  | Level | Non
+	 * IRQ 106| PE2 INTC                          | High  | Level | Non
+	 * IRQ 107| PE2 INTD                          | Risin | Edge  | Non
+	 * IRQ 108| PCI Express MSI Level 4           | Risin | Edge  | Non
+	 * IRQ 109| PCI Express MSI Level 5           | Risin | Edge  | Non
+	 * IRQ 110| PCI Express MSI Level 6           | Risin | Edge  | Non
+	 * IRQ 111| PCI Express MSI Level 7           | Risin | Edge  | Non
+	 * IRQ 116| PCI Express MSI Level 12          | Risin | Edge  | Non
+	 * IRQ 112| PCI Express MSI Level 8           | Risin | Edge  | Non
+	 * IRQ 113| PCI Express MSI Level 9           | Risin | Edge  | Non
+	 * IRQ 114| PCI Express MSI Level 10          | Risin | Edge  | Non
+	 * IRQ 115| PCI Express MSI Level 11          | Risin | Edge  | Non
+	 * IRQ 117| PCI Express MSI Level 13          | Risin | Edge  | Non
+	 * IRQ 118| PCI Express MSI Level 14          | Risin | Edge  | Non
+	 * IRQ 119| PCI Express MSI Level 15          | Risin | Edge  | Non
+	 * IRQ 120| PCI Express MSI Level 16          | Risin | Edge  | Non
+	 * IRQ 121| PCI Express MSI Level 17          | Risin | Edge  | Non
+	 * IRQ 122| PCI Express MSI Level 18          | Risin | Edge  | Non
+	 * IRQ 123| PCI Express MSI Level 19          | Risin | Edge  | Non
+	 * IRQ 124| PCI Express MSI Level 20          | Risin | Edge  | Non
+	 * IRQ 125| PCI Express MSI Level 21          | Risin | Edge  | Non
+	 * IRQ 126| PCI Express MSI Level 22          | Risin | Edge  | Non
+	 * IRQ 127| PCI Express MSI Level 23          | Risin | Edge  | Non
+	 */
+
+	/*
+	 * Put UICs in PowerPC 440SPe mode.
+	 * Initialise UIC registers. Clear all interrupts. Disable all
+	 * interrupts. Set critical interrupt values. Set interrupt polarities.
+	 * Set interrupt trigger levels. Make bit 0 High priority. Clear all
+	 * interrupts again.
+	 */
+	mtdcr(UIC3SR, 0xffffffff);	/* Clear all interrupts */
+	mtdcr(UIC3ER, 0x00000000);	/* disable all interrupts */
+	mtdcr(UIC3CR, 0x00000000);	/* Set Critical / Non Critical IRQs */
+	mtdcr(UIC3PR, 0xffffffff);	/* Set Interrupt Polarities*/
+	mtdcr(UIC3TR, 0x001fffff);	/* Set Interrupt Trigger Levels */
+	mtdcr(UIC3VR, 0x00000001);	/* Set Vect base=0,INT31 Highest prio */
+	mtdcr(UIC3SR, 0x00000000);	/* clear all  interrupts*/
+	mtdcr(UIC3SR, 0xffffffff);	/* clear all  interrupts*/
+
+	mtdcr(UIC2SR, 0xffffffff);	/* Clear all interrupts */
+	mtdcr(UIC2ER, 0x00000000);	/* disable all interrupts*/
+	mtdcr(UIC2CR, 0x00000000);	/* Set Critical / Non Critical IRQs */
+	mtdcr(UIC2PR, 0xebebebff);	/* Set Interrupt Polarities*/
+	mtdcr(UIC2TR, 0x74747400);	/* Set Interrupt Trigger Levels */
+	mtdcr(UIC2VR, 0x00000001);	/* Set Vect base=0,INT31 Highest prio */
+	mtdcr(UIC2SR, 0x00000000);	/* clear all interrupts */
+	mtdcr(UIC2SR, 0xffffffff);	/* clear all interrupts */
+
+	mtdcr(UIC1SR, 0xffffffff);	/* Clear all interrupts*/
+	mtdcr(UIC1ER, 0x00000000);	/* disable all interrupts*/
+	mtdcr(UIC1CR, 0x00000000);	/* Set Critical / Non Critical IRQs */
+	mtdcr(UIC1PR, 0xffffffff);	/* Set Interrupt Polarities */
+	mtdcr(UIC1TR, 0x001f8040);	/* Set Interrupt Trigger Levels*/
+	mtdcr(UIC1VR, 0x00000001);	/* Set Vect base=0,INT31 Highest prio */
+	mtdcr(UIC1SR, 0x00000000);	/* clear all interrupts*/
+	mtdcr(UIC1SR, 0xffffffff);	/* clear all interrupts*/
+
+	mtdcr(UIC0SR, 0xffffffff);	/* Clear all interrupts */
+	mtdcr(UIC0ER, 0x00000000);	/* disable all int. excepted cascade */
+	mtdcr(UIC0CR, 0x00104001);	/* Set Critical / Non Critical IRQs */
+	mtdcr(UIC0PR, 0xffffffff);	/* Set Interrupt Polarities*/
+	mtdcr(UIC0TR, 0x010f0004);	/* Set Interrupt Trigger Levels */
+	mtdcr(UIC0VR, 0x00000001);	/* Set Vect base=0,INT31 Highest prio */
+	mtdcr(UIC0SR, 0x00000000);	/* clear all interrupts*/
+	mtdcr(UIC0SR, 0xffffffff);	/* clear all interrupts*/
+
+	mfsdr(SDR0_MFR, mfr);
+	mfr |= SDR0_MFR_FIXD;		/* Workaround for PCI/DMA */
+	mtsdr(SDR0_MFR, mfr);
+
+	mtsdr(SDR0_PFC0, CONFIG_SYS_PFC0);
+
+	out_be32((void *)GPIO0_OR, CONFIG_SYS_GPIO_OR);
+	out_be32((void *)GPIO0_ODR, CONFIG_SYS_GPIO_ODR);
+	out_be32((void *)GPIO0_TCR, CONFIG_SYS_GPIO_TCR);
+
+	return 0;
+}
+
+int board_early_init_r(void)
+{
+	/*
+	 * ICON has 64MBytes of NOR FLASH (Spansion 29GL512), but the
+	 * boot EBC mapping only supports a maximum of 16MBytes
+	 * (4.ff00.0000 - 4.ffff.ffff).
+	 * To solve this problem, the FLASH has to get remapped to another
+	 * EBC address which accepts bigger regions:
+	 *
+	 * 0xfc00.0000 -> 4.ec00.0000
+	 */
+
+	/* Remap the NOR FLASH to 0xec00.0000 ... 0xefff.ffff */
+	mtebc(PB0CR, CONFIG_SYS_FLASH_BASE_PHYS_L | 0xda000);
+
+	/* Remove TLB entry of boot EBC mapping */
+	remove_tlb(CONFIG_SYS_BOOT_BASE_ADDR, 16 << 20);
+
+	/* Add TLB entry for 0xfc00.0000 -> 0x4.ec00.0000 */
+	program_tlb(CONFIG_SYS_FLASH_BASE_PHYS, CONFIG_SYS_FLASH_BASE,
+		    CONFIG_SYS_FLASH_SIZE, TLB_WORD2_I_ENABLE);
+
+	/*
+	 * Now accessing of the whole 64Mbytes of NOR FLASH at virtual address
+	 * 0xfc00.0000 is possible
+	 */
+
+	/*
+	 * Clear potential errors resulting from auto-calibration.
+	 * If not done, then we could get an interrupt later on when
+	 * exceptions are enabled.
+	 */
+	set_mcsr(get_mcsr());
+
+	return 0;
+}
+
+int checkboard(void)
+{
+	char *s = getenv("serial#");
+
+	printf("Board: ICON");
+	if (s != NULL) {
+		puts(", serial# ");
+		puts(s);
+	}
+	putc('\n');
+
+	return 0;
+}
+
+/*
+ * Override the default functions in cpu/ppc4xx/44x_spd_ddr2.c with
+ * board specific values.
+ *
+ * Tested successfully with the following SODIMM:
+ * Crucial CT6464AC667.4FE - 512MB SO-DIMM (single rank)
+ *
+ * Tests with Micron MT4HTF6464HZ-667H1 showed problems in "cold" state,
+ * directly after power-up. Only after running for more than 10 minutes
+ * real stable auto-calibration windows could be found.
+ */
+u32 ddr_wrdtr(u32 default_val)
+{
+	return SDRAM_WRDTR_LLWP_1_CYC | SDRAM_WRDTR_WTR_90_DEG_ADV;
+}
+
+u32 ddr_clktr(u32 default_val)
+{
+	return SDRAM_CLKTR_CLKP_180_DEG_ADV;
+}
+
+/*
+ * Override the weak default implementation and return the
+ * last PCIe slot number (max number - 1).
+ */
+int board_pcie_last(void)
+{
+	/* Only 2 PCIe ports used on ICON, so the last one is 1 */
+	return 1;
+}
diff --git a/board/mosaixtech/icon/init.S b/board/mosaixtech/icon/init.S
new file mode 100644
index 0000000000..70ed6ce13b
--- /dev/null
+++ b/board/mosaixtech/icon/init.S
@@ -0,0 +1,88 @@
+/*
+ * (C) Copyright 2009-2010
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <ppc_asm.tmpl>
+#include <config.h>
+#include <asm/mmu.h>
+
+/*
+ * TLB TABLE
+ *
+ * This table is used by the cpu boot code to setup the initial tlb
+ * entries. Rather than make broad assumptions in the cpu source tree,
+ * this table lets each board set things up however they like.
+ *
+ *  Pointer to the table is returned in r1
+ *
+ */
+
+	.section .bootpg,"ax"
+
+	.globl tlbtab
+tlbtab:
+	tlbtab_start
+
+	/*
+	 * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to
+	 * use the speed up boot process. It is patched after relocation to
+	 * enable SA_I.
+	 */
+	tlbentry(CONFIG_SYS_BOOT_BASE_ADDR, SZ_16M, CONFIG_SYS_BOOT_BASE_ADDR,
+		 4, AC_RWX | SA_G) /* TLB 0 */
+
+	/*
+	 * TLB entries for SDRAM are not needed on this platform.
+	 * They are dynamically generated in the SPD DDR(2) detection
+	 * routine.
+	 */
+
+	tlbentry(CONFIG_SYS_ISRAM_BASE, SZ_256K, 0x00000000, 4,
+		 AC_RWX | SA_I)
+
+	tlbentry(CONFIG_SYS_PERIPHERAL_BASE, SZ_4K, 0xF0000000, 4,
+		 AC_RW | SA_IG)
+
+	tlbentry(CONFIG_SYS_ACE_BASE, SZ_1K,
+		 CONFIG_SYS_ACE_BASE_PHYS_L, CONFIG_SYS_ACE_BASE_PHYS_H,
+		 AC_RW | SA_IG)
+
+	tlbentry(CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 0xC,
+		 AC_RW | SA_IG)
+	tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC,
+		 AC_RW | SA_IG)
+	tlbentry(CONFIG_SYS_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD,
+		 AC_RW | SA_IG)
+
+	tlbentry(CONFIG_SYS_PCIE0_CFGBASE, SZ_16M, 0x00000000, 0xD,
+		 AC_RW | SA_IG)
+	tlbentry(CONFIG_SYS_PCIE1_CFGBASE, SZ_16M, 0x20000000, 0xD,
+		 AC_RW | SA_IG)
+	tlbentry(CONFIG_SYS_PCIE2_CFGBASE, SZ_16M, 0x40000000, 0xD,
+		 AC_RW | SA_IG)
+	tlbentry(CONFIG_SYS_PCIE0_XCFGBASE, SZ_1K, 0x10000000, 0xD,
+		 AC_RW | SA_IG)
+	tlbentry(CONFIG_SYS_PCIE1_XCFGBASE, SZ_1K, 0x30000000, 0xD,
+		 AC_RW | SA_IG)
+	tlbentry(CONFIG_SYS_PCIE2_XCFGBASE, SZ_1K, 0x50000000, 0xD,
+		 AC_RW | SA_IG)
+	tlbtab_end
diff --git a/include/configs/APC405.h b/include/configs/APC405.h
index 41eaaabfcd..20849bc685 100644
--- a/include/configs/APC405.h
+++ b/include/configs/APC405.h
@@ -304,6 +304,7 @@ extern int flash_banks;
  * I2C EEPROM (CAT24WC16) for environment
  */
 #define CONFIG_HARD_I2C			/* I2c with hardware support */
+#define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
 #define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed and slave address */
 #define CONFIG_SYS_I2C_SLAVE		0x7F
 
diff --git a/include/configs/icon.h b/include/configs/icon.h
new file mode 100644
index 0000000000..3a57d695f9
--- /dev/null
+++ b/include/configs/icon.h
@@ -0,0 +1,308 @@
+/*
+ * (C) Copyright 2009-2010
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * icon.h - configuration for Mosaixtech ICON (440SPe)
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_ICON		1		/* Board is icon	*/
+#define CONFIG_4xx		1		/* ... PPC4xx family	*/
+#define CONFIG_440		1		/* ... PPC440 family	*/
+#define CONFIG_440SPE		1		/* Specifc SPe support	*/
+#define CONFIG_SYS_CLK_FREQ	33333333	/* external freq to pll	*/
+#define CONFIG_SYS_4xx_RESET_TYPE 0x2	/* use chip reset on this board	*/
+
+/*
+ * Include common defines/options for all AMCC eval boards
+ */
+#define CONFIG_HOSTNAME		icon
+#include "amcc-common.h"
+
+#define CONFIG_BOARD_EARLY_INIT_F	/* Call board_pre_init	*/
+#define CONFIG_BOARD_EARLY_INIT_R	/* Call board_early_init_r */
+
+/*
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ */
+#define CONFIG_SYS_FLASH_BASE	0xfc000000	/* later mapped to this addr */
+#define CONFIG_SYS_PERIPHERAL_BASE 0xa0000000	/* internal peripherals	*/
+#define CONFIG_SYS_ISRAM_BASE	0x90000000	/* internal SRAM	*/
+
+#define CONFIG_SYS_PCI_MEMBASE	0x80000000	/* mapped PCI memory	*/
+#define CONFIG_SYS_PCI_BASE	0xd0000000	/* internal PCI regs	*/
+#define CONFIG_SYS_PCI_TARGBASE	CONFIG_SYS_PCI_MEMBASE
+
+#define CONFIG_SYS_PCIE_MEMBASE	0xb0000000	/* mapped PCIe memory	*/
+#define CONFIG_SYS_PCIE_MEMSIZE	0x08000000	/* incr for PCIe port */
+#define CONFIG_SYS_PCIE_BASE	0xe0000000	/* PCIe UTL regs */
+
+#define CONFIG_SYS_PCIE0_CFGBASE	0xc0000000
+#define CONFIG_SYS_PCIE1_CFGBASE	0xc1000000
+#define CONFIG_SYS_PCIE2_CFGBASE	0xc2000000
+#define CONFIG_SYS_PCIE0_XCFGBASE	0xc3000000
+#define CONFIG_SYS_PCIE1_XCFGBASE	0xc3001000
+#define CONFIG_SYS_PCIE2_XCFGBASE	0xc3002000
+
+/* base address of inbound PCIe window */
+#define CONFIG_SYS_PCIE_INBOUND_BASE	0x0000000000000000ULL
+
+/* System RAM mapped to PCI space */
+#define CONFIG_PCI_SYS_MEM_BUS	CONFIG_SYS_SDRAM_BASE
+#define CONFIG_PCI_SYS_MEM_PHYS	CONFIG_SYS_SDRAM_BASE
+#define CONFIG_PCI_SYS_MEM_SIZE	(1024 * 1024 * 1024)
+
+#define CONFIG_SYS_ACE_BASE		0xfb000000	/* Xilinx ACE CF */
+#define CONFIG_SYS_ACE_BASE_PHYS_H	0x4
+#define CONFIG_SYS_ACE_BASE_PHYS_L	0xfe000000
+
+#define CONFIG_SYS_FLASH_SIZE		(64 << 20)
+#define CONFIG_SYS_BOOT_BASE_ADDR	0xFF000000	/* EBC Boot Space */
+#define CONFIG_SYS_FLASH_BASE_PHYS_H	0x4
+#define CONFIG_SYS_FLASH_BASE_PHYS_L	0xEC000000
+#define CONFIG_SYS_FLASH_BASE_PHYS	(((u64)CONFIG_SYS_FLASH_BASE_PHYS_H << 32) | \
+					 (u64)CONFIG_SYS_FLASH_BASE_PHYS_L)
+
+/*
+ * Initial RAM & stack pointer (placed in internal SRAM)
+ */
+#define CONFIG_SYS_TEMP_STACK_OCM	1
+#define CONFIG_SYS_OCM_DATA_ADDR	CONFIG_SYS_ISRAM_BASE
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_ISRAM_BASE	/* Init RAM */
+#define CONFIG_SYS_INIT_RAM_END		0x2000		/* end used area */
+#define CONFIG_SYS_GBL_DATA_SIZE	128		/* sizeof init data */
+
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - \
+					 CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_POST_WORD_ADDR	(CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_POST_WORD_ADDR
+
+/*
+ * Serial Port
+ */
+#undef CONFIG_UART1_CONSOLE
+#undef CONFIG_SYS_EXT_SERIAL_CLOCK
+
+/*
+ * DDR2 SDRAM
+ */
+#define CONFIG_SPD_EEPROM		/* Use SPD EEPROM for setup	*/
+#define SPD_EEPROM_ADDRESS	{ 0x51 } /* SPD I2C SPD addresses	*/
+#define CONFIG_DDR_ECC			/* with ECC support		*/
+#define CONFIG_DDR_RQDC_FIXED	0x80000038 /* fixed value for RQDC	*/
+
+/*
+ * I2C
+ */
+#define CONFIG_SYS_I2C_SPEED	100000	/* I2C speed and slave address	*/
+
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_SPD_BUS_NUM	0	/* The I2C bus for SPD		*/
+
+#define CONFIG_SYS_I2C_MULTI_EEPROMS
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
+
+/* I2C bootstrap EEPROM */
+#define CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR	0x50
+#define CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET	0
+#define CONFIG_4xx_CONFIG_BLOCKSIZE		8
+
+/* I2C RTC */
+#define CONFIG_RTC_M41T11
+#define CONFIG_SYS_RTC_BUS_NUM	1	/* The I2C bus for RTC		*/
+#define CONFIG_SYS_I2C_RTC_ADDR	0x68
+#define CONFIG_SYS_M41T11_BASE_YEAR 1900 /* play along with linux	*/
+
+/*
+ * Environment
+ */
+#define	CONFIG_ENV_IS_IN_FLASH	1	/* Environment uses flash	*/
+
+/*
+ * Default environment variables
+ */
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+	CONFIG_AMCC_DEF_ENV						\
+	CONFIG_AMCC_DEF_ENV_POWERPC					\
+	CONFIG_AMCC_DEF_ENV_NOR_UPD					\
+	"kernel_addr=fc000000\0"					\
+	"fdt_addr=fc1e0000\0"						\
+	"ramdisk_addr=fc200000\0"					\
+	"pciconfighost=1\0"						\
+	"pcie_mode=RP:RP:RP\0"						\
+	""
+
+/*
+ * Commands additional to the ones defined in amcc-common.h
+ */
+#define CONFIG_CMD_CHIP_CONFIG
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_SNTP
+
+#define	CONFIG_IBM_EMAC4_V4		/* 440SPe has this EMAC version	*/
+#define CONFIG_PHY_ADDR		1	/* PHY address, See schematics	*/
+#define CONFIG_HAS_ETH0
+#define CONFIG_PHY_RESET		/* reset phy upon startup	*/
+#define CONFIG_PHY_RESET_DELAY	1000
+#define CONFIG_CIS8201_PHY		/* Enable RGMII mode for Cicada phy */
+#define CONFIG_PHY_GIGE			/* Include GbE speed/duplex det. */
+
+/*
+ * FLASH related
+ */
+#define CONFIG_SYS_FLASH_CFI		/* The flash is CFI compatible	*/
+#define CONFIG_FLASH_CFI_DRIVER		/* Use common CFI driver	*/
+#define CONFIG_SYS_FLASH_CFI_AMD_RESET	/* Use AMD (Spansion) reset cmd */
+#define CONFIG_SYS_CFI_FLASH_STATUS_POLL /* use status poll method	*/
+
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of banks	*/
+#define CONFIG_SYS_MAX_FLASH_SECT	512	/* max number of sectors*/
+
+#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* TO for Flash Erase (ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* TO for Flash Write (ms) */
+
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	/* use buffered writes	*/
+#define CONFIG_SYS_FLASH_EMPTY_INFO		/* 'E' for empty sector */
+
+#define CONFIG_ENV_SECT_SIZE	0x20000	/* size of one complete sector	*/
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
+#define	CONFIG_ENV_SIZE		0x4000	/* Total Size of Env Sector	*/
+
+/* Address and size of Redundant Environment Sector	*/
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR - CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
+
+/*
+ * PCI stuff
+ */
+/* General PCI */
+#define CONFIG_PCI			/* include pci support		*/
+#define CONFIG_PCI_PNP			/* do pci plug-and-play		*/
+#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup	*/
+#define CONFIG_PCI_CONFIG_HOST_BRIDGE
+#define CONFIG_PCI_BOOTDELAY	1000	/* enable pci bootdelay variable*/
+
+/* Board-specific PCI */
+#define CONFIG_SYS_PCI_TARGET_INIT	/* let board init pci target    */
+#undef	CONFIG_SYS_PCI_MASTER_INIT
+
+#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1014	/* IBM			*/
+#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe	/* Whatever		*/
+
+/*
+ * Xilinx System ACE support
+ */
+#define CONFIG_SYSTEMACE		/* Enable SystemACE support	*/
+#define CONFIG_SYS_SYSTEMACE_WIDTH	16	/* Data bus width is 16	*/
+#define CONFIG_SYS_SYSTEMACE_BASE	CONFIG_SYS_ACE_BASE
+#define CONFIG_DOS_PARTITION
+
+/*
+ * External Bus Controller (EBC) Setup
+ */
+
+/* Memory Bank 0 (Flash) initialization					*/
+#define CONFIG_SYS_EBC_PB0AP	(EBC_BXAP_BME_DISABLED      |		\
+				 EBC_BXAP_TWT_ENCODE(7)     |		\
+				 EBC_BXAP_BCE_DISABLE       |		\
+				 EBC_BXAP_BCT_2TRANS        |		\
+				 EBC_BXAP_CSN_ENCODE(0)     |		\
+				 EBC_BXAP_OEN_ENCODE(0)     |		\
+				 EBC_BXAP_WBN_ENCODE(0)     |		\
+				 EBC_BXAP_WBF_ENCODE(0)     |		\
+				 EBC_BXAP_TH_ENCODE(0)      |		\
+				 EBC_BXAP_RE_DISABLED       |		\
+				 EBC_BXAP_SOR_DELAYED       |		\
+				 EBC_BXAP_BEM_WRITEONLY     |		\
+				 EBC_BXAP_PEN_DISABLED)
+#define CONFIG_SYS_EBC_PB0CR	(EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FLASH_BASE) | \
+				 EBC_BXCR_BS_64MB                    |	\
+				 EBC_BXCR_BU_RW                      |	\
+				 EBC_BXCR_BW_16BIT)
+
+/* Memory Bank 1 (Xilinx System ACE controller) initialization		*/
+#define CONFIG_SYS_EBC_PB1AP	(EBC_BXAP_BME_DISABLED      |		\
+				 EBC_BXAP_TWT_ENCODE(4)     |		\
+				 EBC_BXAP_BCE_DISABLE       |		\
+				 EBC_BXAP_BCT_2TRANS        |		\
+				 EBC_BXAP_CSN_ENCODE(0)     |		\
+				 EBC_BXAP_OEN_ENCODE(0)     |		\
+				 EBC_BXAP_WBN_ENCODE(0)     |		\
+				 EBC_BXAP_WBF_ENCODE(0)     |		\
+				 EBC_BXAP_TH_ENCODE(0)      |		\
+				 EBC_BXAP_RE_DISABLED       |		\
+				 EBC_BXAP_SOR_NONDELAYED    |		\
+				 EBC_BXAP_BEM_WRITEONLY     |		\
+				 EBC_BXAP_PEN_DISABLED)
+#define CONFIG_SYS_EBC_PB1CR	(EBC_BXCR_BAS_ENCODE(CONFIG_SYS_ACE_BASE_PHYS_L) | \
+				 EBC_BXCR_BS_1MB                    |	\
+				 EBC_BXCR_BU_RW                     |	\
+				 EBC_BXCR_BW_16BIT)
+
+/*
+ * Initialize EBC CONFIG -
+ * Keep the Default value, but the bit PDT which has to be set to 1 ?TBC
+ * default value : 0x07C00000 - 0 0 000 1 1 1 1 1 0000 0 00000 000000000000
+ */
+#define CONFIG_SYS_EBC_CFG	(EBC_CFG_LE_UNLOCK    |	\
+				 EBC_CFG_PTD_ENABLE   |	\
+				 EBC_CFG_RTC_16PERCLK | \
+				 EBC_CFG_ATC_PREVIOUS | \
+				 EBC_CFG_DTC_PREVIOUS | \
+				 EBC_CFG_CTC_PREVIOUS | \
+				 EBC_CFG_OEO_PREVIOUS | \
+				 EBC_CFG_EMC_DEFAULT  |	\
+				 EBC_CFG_PME_DISABLE  |	\
+				 EBC_CFG_PR_16)
+
+/*
+ * GPIO Setup
+ */
+#define CONFIG_SYS_GPIO_PCIE_PRESENT0	17
+#define CONFIG_SYS_GPIO_PCIE_PRESENT1	21
+#define CONFIG_SYS_GPIO_PCIE_PRESENT2	23
+#define CONFIG_SYS_GPIO_RS232_FORCEOFF	30
+
+#define CONFIG_SYS_PFC0		(GPIO_VAL(CONFIG_SYS_GPIO_PCIE_PRESENT0) | \
+				 GPIO_VAL(CONFIG_SYS_GPIO_PCIE_PRESENT1) | \
+				 GPIO_VAL(CONFIG_SYS_GPIO_PCIE_PRESENT2) | \
+				 GPIO_VAL(CONFIG_SYS_GPIO_RS232_FORCEOFF))
+#define CONFIG_SYS_GPIO_OR	GPIO_VAL(CONFIG_SYS_GPIO_RS232_FORCEOFF)
+#define CONFIG_SYS_GPIO_TCR	GPIO_VAL(CONFIG_SYS_GPIO_RS232_FORCEOFF)
+#define CONFIG_SYS_GPIO_ODR	0
+
+#endif	/* __CONFIG_H */