Merge branch 'master' of git://www.denx.de/git/u-boot-imx

52 files changed, 1196 insertions, 52 deletions

diff --git a/README b/README
index 3547ead07a..676f41e7f0 100644
--- a/README
+++ b/README
@@ -4422,6 +4422,9 @@ to save the current settings.
 	  If defined, specified the chip address of the EEPROM device.
 	  The default address is zero.
 
+	- CONFIG_SYS_I2C_EEPROM_BUS:
+	  If defined, specified the i2c bus of the EEPROM device.
+
 	- CONFIG_SYS_EEPROM_PAGE_WRITE_BITS:
 	  If defined, the number of bits used to address bytes in a
 	  single page in the EEPROM device.  A 64 byte page, for example
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index bc55e5b1f5..8472d41565 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -465,6 +465,10 @@ config TARGET_WANDBOARD
 	bool "Support wandboard"
 	select CPU_V7
 
+config TARGET_WARP
+	bool "Support WaRP"
+	select CPU_V7
+
 config TARGET_TITANIUM
 	bool "Support titanium"
 	select CPU_V7
@@ -842,6 +846,7 @@ source "board/ttcontrol/vision2/Kconfig"
 source "board/udoo/Kconfig"
 source "board/vpac270/Kconfig"
 source "board/wandboard/Kconfig"
+source "board/warp/Kconfig"
 source "board/woodburn/Kconfig"
 source "board/xaeniax/Kconfig"
 source "board/xilinx/zynqmp/Kconfig"
diff --git a/arch/arm/cpu/arm1136/mx31/Makefile b/arch/arm/cpu/arm1136/mx31/Makefile
index 9670ed9382..dcbd57065b 100644
--- a/arch/arm/cpu/arm1136/mx31/Makefile
+++ b/arch/arm/cpu/arm1136/mx31/Makefile
@@ -8,3 +8,7 @@
 obj-y	+= generic.o
 obj-y	+= timer.o
 obj-y	+= devices.o
+
+ifndef CONFIG_SPL_BUILD
+obj-y  += relocate.o
+endif
diff --git a/arch/arm/cpu/arm1136/mx31/relocate.S b/arch/arm/cpu/arm1136/mx31/relocate.S
new file mode 100644
index 0000000000..1c556df71b
--- /dev/null
+++ b/arch/arm/cpu/arm1136/mx31/relocate.S
@@ -0,0 +1,23 @@
+/*
+ *  relocate - i.MX31-specific vector relocation
+ *
+ *  Copyright (c) 2013  Albert ARIBAUD <albert.u.boot@aribaud.net>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <linux/linkage.h>
+
+/*
+ * The i.MX31 SoC is very specific with respect to exceptions: it
+ * does not provide RAM at the high vectors address (0xFFFF0000),
+ * thus only the low address (0x00000000) is useable; but that is
+ * in ROM, so let's avoid relocating the vectors.
+ */
+	.section	.text.relocate_vectors,"ax",%progbits
+
+ENTRY(relocate_vectors)
+
+	bx	lr
+
+ENDPROC(relocate_vectors)
diff --git a/arch/arm/cpu/arm1136/mx35/Makefile b/arch/arm/cpu/arm1136/mx35/Makefile
index c533215c3a..796db9c7cc 100644
--- a/arch/arm/cpu/arm1136/mx35/Makefile
+++ b/arch/arm/cpu/arm1136/mx35/Makefile
@@ -10,3 +10,7 @@
 obj-y	+= generic.o
 obj-y	+= timer.o
 obj-y	+= mx35_sdram.o
+
+ifndef CONFIG_SPL_BUILD
+obj-y  += relocate.o
+endif
diff --git a/arch/arm/cpu/arm1136/mx35/relocate.S b/arch/arm/cpu/arm1136/mx35/relocate.S
new file mode 100644
index 0000000000..43003f8044
--- /dev/null
+++ b/arch/arm/cpu/arm1136/mx35/relocate.S
@@ -0,0 +1,23 @@
+/*
+ *  relocate - i.MX35-specific vector relocation
+ *
+ *  Copyright (c) 2013  Albert ARIBAUD <albert.u.boot@aribaud.net>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <linux/linkage.h>
+
+/*
+ * The i.MX35 SoC is very specific with respect to exceptions: it
+ * does not provide RAM at the high vectors address (0xFFFF0000),
+ * thus only the low address (0x00000000) is useable; but that is
+ * in ROM, so let's avoid relocating the vectors.
+ */
+	.section	.text.relocate_vectors,"ax",%progbits
+
+ENTRY(relocate_vectors)
+
+	bx	lr
+
+ENDPROC(relocate_vectors)
diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c
index e599a12b3a..ef029722b4 100644
--- a/arch/arm/cpu/armv7/mx6/soc.c
+++ b/arch/arm/cpu/armv7/mx6/soc.c
@@ -230,6 +230,11 @@ static void imx_set_wdog_powerdown(bool enable)
 	struct wdog_regs *wdog1 = (struct wdog_regs *)WDOG1_BASE_ADDR;
 	struct wdog_regs *wdog2 = (struct wdog_regs *)WDOG2_BASE_ADDR;
 
+#ifdef CONFIG_MX6SX
+	struct wdog_regs *wdog3 = (struct wdog_regs *)WDOG3_BASE_ADDR;
+	writew(enable, &wdog3->wmcr);
+#endif
+
 	/* Write to the PDE (Power Down Enable) bit */
 	writew(enable, &wdog1->wmcr);
 	writew(enable, &wdog2->wmcr);
@@ -255,6 +260,23 @@ static void clear_mmdc_ch_mask(void)
 	writel(0, &mxc_ccm->ccdr);
 }
 
+static void init_bandgap(void)
+{
+	struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
+	/*
+	 * Ensure the bandgap has stabilized.
+	 */
+	while (!(readl(&anatop->ana_misc0) & 0x80))
+		;
+	/*
+	 * For best noise performance of the analog blocks using the
+	 * outputs of the bandgap, the reftop_selfbiasoff bit should
+	 * be set.
+	 */
+	writel(BM_ANADIG_ANA_MISC0_REFTOP_SELBIASOFF, &anatop->ana_misc0_set);
+}
+
+
 #ifdef CONFIG_MX6SL
 static void set_preclk_from_osc(void)
 {
@@ -275,6 +297,13 @@ int arch_cpu_init(void)
 	clear_mmdc_ch_mask();
 
 	/*
+	 * Disable self-bias circuit in the analog bandap.
+	 * The self-bias circuit is used by the bandgap during startup.
+	 * This bit should be set after the bandgap has initialized.
+	 */
+	init_bandgap();
+
+	/*
 	 * When low freq boot is enabled, ROM will not set AHB
 	 * freq, so we need to ensure AHB freq is 132MHz in such
 	 * scenario.
diff --git a/arch/arm/imx-common/Makefile b/arch/arm/imx-common/Makefile
index 25a9d4ce12..606482f7a3 100644
--- a/arch/arm/imx-common/Makefile
+++ b/arch/arm/imx-common/Makefile
@@ -24,6 +24,7 @@ obj-$(CONFIG_IMX_VIDEO_SKIP) += video.o
 endif
 obj-$(CONFIG_CMD_BMODE) += cmd_bmode.o
 obj-$(CONFIG_CMD_HDMIDETECT) += cmd_hdmidet.o
+obj-$(CONFIG_CMD_DEKBLOB) += cmd_dek.o
 
 quiet_cmd_cpp_cfg = CFGS    $@
       cmd_cpp_cfg = $(CPP) $(cpp_flags) -x c -o $@ $<
diff --git a/arch/arm/imx-common/cmd_dek.c b/arch/arm/imx-common/cmd_dek.c
new file mode 100644
index 0000000000..d93d5fb240
--- /dev/null
+++ b/arch/arm/imx-common/cmd_dek.c
@@ -0,0 +1,91 @@
+/*
+ * Copyright 2008-2015 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * Command for encapsulating DEK blob
+ */
+
+#include <common.h>
+#include <command.h>
+#include <environment.h>
+#include <malloc.h>
+#include <asm/byteorder.h>
+#include <linux/compiler.h>
+#include <fsl_sec.h>
+#include <asm/arch/clock.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/**
+* blob_dek() - Encapsulate the DEK as a blob using CAM's Key
+* @src: - Address of data to be encapsulated
+* @dst: - Desination address of encapsulated data
+* @len: - Size of data to be encapsulated
+*
+* Returns zero on success,and negative on error.
+*/
+static int blob_encap_dek(const u8 *src, u8 *dst, u32 len)
+{
+	int ret = 0;
+	u32 jr_size = 4;
+
+	u32 out_jr_size = sec_in32(CONFIG_SYS_FSL_JR0_ADDR + 0x102c);
+	if (out_jr_size != jr_size) {
+		hab_caam_clock_enable(1);
+		sec_init();
+	}
+
+	if (!((len == 128) | (len == 192) | (len == 256))) {
+		debug("Invalid DEK size. Valid sizes are 128, 192 and 256b\n");
+		return -1;
+	}
+
+	len /= 8;
+	ret = blob_dek(src, dst, len);
+
+	return ret;
+}
+
+/**
+ * do_dek_blob() - Handle the "dek_blob" command-line command
+ * @cmdtp:  Command data struct pointer
+ * @flag:   Command flag
+ * @argc:   Command-line argument count
+ * @argv:   Array of command-line arguments
+ *
+ * Returns zero on success, CMD_RET_USAGE in case of misuse and negative
+ * on error.
+ */
+static int do_dek_blob(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
+{
+	uint32_t src_addr, dst_addr, len;
+	uint8_t *src_ptr, *dst_ptr;
+	int ret = 0;
+
+	if (argc != 4)
+		return CMD_RET_USAGE;
+
+	src_addr = simple_strtoul(argv[1], NULL, 16);
+	dst_addr = simple_strtoul(argv[2], NULL, 16);
+	len = simple_strtoul(argv[3], NULL, 10);
+
+	src_ptr = map_sysmem(src_addr, len/8);
+	dst_ptr = map_sysmem(dst_addr, BLOB_SIZE(len/8));
+
+	ret = blob_encap_dek(src_ptr, dst_ptr, len);
+
+	return ret;
+}
+
+/***************************************************/
+static char dek_blob_help_text[] =
+	"src dst len            - Encapsulate and create blob of data\n"
+	"                         $len bits long at address $src and\n"
+	"                         store the result at address $dst.\n";
+
+U_BOOT_CMD(
+	dek_blob, 4, 1, do_dek_blob,
+	"Data Encryption Key blob encapsulation",
+	dek_blob_help_text
+);
diff --git a/arch/arm/imx-common/cpu.c b/arch/arm/imx-common/cpu.c
index 28ccd29594..067d08f131 100644
--- a/arch/arm/imx-common/cpu.c
+++ b/arch/arm/imx-common/cpu.c
@@ -24,13 +24,16 @@
 #include <fsl_esdhc.h>
 #endif
 
-char *get_reset_cause(void)
+static u32 reset_cause = -1;
+
+static char *get_reset_cause(void)
 {
 	u32 cause;
 	struct src *src_regs = (struct src *)SRC_BASE_ADDR;
 
 	cause = readl(&src_regs->srsr);
 	writel(cause, &src_regs->srsr);
+	reset_cause = cause;
 
 	switch (cause) {
 	case 0x00001:
@@ -53,6 +56,11 @@ char *get_reset_cause(void)
 	}
 }
 
+u32 get_imx_reset_cause(void)
+{
+	return reset_cause;
+}
+
 #if defined(CONFIG_MX53) || defined(CONFIG_MX6)
 #if defined(CONFIG_MX53)
 #define MEMCTL_BASE	ESDCTL_BASE_ADDR
diff --git a/arch/arm/imx-common/timer.c b/arch/arm/imx-common/timer.c
index 65ef60bf2e..e522990453 100644
--- a/arch/arm/imx-common/timer.c
+++ b/arch/arm/imx-common/timer.c
@@ -176,3 +176,20 @@ ulong get_tbclk(void)
 {
 	return gpt_get_clk();
 }
+
+/*
+ * This function is intended for SHORT delays only.
+ * It will overflow at around 10 seconds @ 400MHz,
+ * or 20 seconds @ 200MHz.
+ */
+unsigned long usec2ticks(unsigned long usec)
+{
+	ulong ticks;
+
+	if (usec < 1000)
+		ticks = ((usec * (get_tbclk()/1000)) + 500) / 1000;
+	else
+		ticks = ((usec / 10) * (get_tbclk() / 100000));
+
+	return ticks;
+}
diff --git a/arch/arm/include/asm/arch-imx/cpu.h b/arch/arm/include/asm/arch-imx/cpu.h
index 254136e228..4715f4e894 100644
--- a/arch/arm/include/asm/arch-imx/cpu.h
+++ b/arch/arm/include/asm/arch-imx/cpu.h
@@ -17,3 +17,5 @@
 #define CS0_64M_CS1_64M				1
 #define CS0_64M_CS1_32M_CS2_32M			2
 #define CS0_32M_CS1_32M_CS2_32M_CS3_32M		3
+
+u32 get_imx_reset_cause(void);
diff --git a/arch/arm/include/asm/arch-mx5/sys_proto.h b/arch/arm/include/asm/arch-mx5/sys_proto.h
index ac7705b3b0..b06c77f65c 100644
--- a/arch/arm/include/asm/arch-mx5/sys_proto.h
+++ b/arch/arm/include/asm/arch-mx5/sys_proto.h
@@ -24,6 +24,5 @@ void set_chipselect_size(int const);
 int fecmxc_initialize(bd_t *bis);
 u32 get_ahb_clk(void);
 u32 get_periph_clk(void);
-char *get_reset_cause(void);
 
 #endif
diff --git a/arch/arm/include/asm/arch-mx6/crm_regs.h b/arch/arm/include/asm/arch-mx6/crm_regs.h
index 39f3c0707b..0592ce0171 100644
--- a/arch/arm/include/asm/arch-mx6/crm_regs.h
+++ b/arch/arm/include/asm/arch-mx6/crm_regs.h
@@ -1063,4 +1063,6 @@ struct mxc_ccm_reg {
 #define BF_ANADIG_PFD_528_PFD0_FRAC(v)  \
 	(((v) << 0) & BM_ANADIG_PFD_528_PFD0_FRAC)
 
+#define BM_ANADIG_ANA_MISC0_REFTOP_SELBIASOFF 0x00000008
+
 #endif /*__ARCH_ARM_MACH_MX6_CCM_REGS_H__ */
diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h
index ae88b6ecab..9a4ad8b559 100644
--- a/arch/arm/include/asm/arch-mx6/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx6/imx-regs.h
@@ -215,6 +215,10 @@
 #define AIPS2_OFF_BASE_ADDR         (ATZ2_BASE_ADDR + 0x80000)
 #define CAAM_BASE_ADDR              (ATZ2_BASE_ADDR)
 #define ARM_BASE_ADDR		    (ATZ2_BASE_ADDR + 0x40000)
+
+#define CONFIG_SYS_FSL_SEC_ADDR     CAAM_BASE_ADDR
+#define CONFIG_SYS_FSL_JR0_ADDR     (CAAM_BASE_ADDR + 0x1000)
+
 #define USB_PL301_BASE_ADDR         (AIPS2_OFF_BASE_ADDR + 0x0000)
 #define USB_BASE_ADDR               (AIPS2_OFF_BASE_ADDR + 0x4000)
 
diff --git a/arch/arm/include/asm/arch-mx6/mx6sl_pins.h b/arch/arm/include/asm/arch-mx6/mx6sl_pins.h
index 9ded3d851c..6ba1034b2e 100644
--- a/arch/arm/include/asm/arch-mx6/mx6sl_pins.h
+++ b/arch/arm/include/asm/arch-mx6/mx6sl_pins.h
@@ -31,7 +31,12 @@ enum {
 	MX6_PAD_SD2_DAT1__USDHC2_DAT1				= IOMUX_PAD(0x0568, 0x0260, 0, 0x0000, 0, 0),
 	MX6_PAD_SD2_DAT2__USDHC2_DAT2				= IOMUX_PAD(0x056C, 0x0264, 0, 0x0000, 0, 0),
 	MX6_PAD_SD2_DAT3__USDHC2_DAT3				= IOMUX_PAD(0x0570, 0x0268, 0, 0x0000, 0, 0),
+	MX6_PAD_SD2_DAT4__USDHC2_DAT4				= IOMUX_PAD(0X0574, 0X026C, 0, 0X0000, 0, 0),
+	MX6_PAD_SD2_DAT5__USDHC2_DAT5				= IOMUX_PAD(0X0578, 0X0270, 0, 0X0000, 0, 0),
+	MX6_PAD_SD2_DAT6__USDHC2_DAT6				= IOMUX_PAD(0X057C, 0X0274, 0, 0X0000, 0, 0),
+	MX6_PAD_SD2_DAT7__USDHC2_DAT7				= IOMUX_PAD(0X0580, 0X0278, 0, 0X0000, 0, 0),
 	MX6_PAD_SD2_DAT7__GPIO_5_0					= IOMUX_PAD(0x0580, 0x0278, 5, 0x0000, 0, 0),
+	MX6_PAD_SD2_RST__USDHC2_RST				= IOMUX_PAD(0x0584, 0x027C, 0, 0x0000, 0, 0),
 	MX6_PAD_SD3_CLK__USDHC3_CLK					= IOMUX_PAD(0x0588, 0x0280, 0, 0x0000, 0, 0),
 	MX6_PAD_SD3_CMD__USDHC3_CMD					= IOMUX_PAD(0x058C, 0x0284, 0, 0x0000, 0, 0),
 	MX6_PAD_SD3_DAT0__USDHC3_DAT0				= IOMUX_PAD(0x0590, 0x0288, 0, 0x0000, 0, 0),
@@ -58,5 +63,10 @@ enum {
 
 	MX6_PAD_KEY_COL4__USB_USBOTG1_PWR			= IOMUX_PAD(0x0484, 0x017C, 6, 0x0000, 0, 0),
 	MX6_PAD_KEY_COL5__USB_USBOTG2_PWR			= IOMUX_PAD(0x0488, 0x0180, 6, 0x0000, 0, 0),
+
+	MX6_PAD_I2C1_SDA__I2C1_SDA				= IOMUX_PAD(0x0450, 0x0160, 0x10, 0x0720, 2, 0),
+	MX6_PAD_I2C1_SDA__GPIO_3_13				= IOMUX_PAD(0x0450, 0x0160, 5, 0x0000, 0, 0),
+	MX6_PAD_I2C1_SCL__I2C1_SCL				= IOMUX_PAD(0x044C, 0x015C, 0x10, 0x071C, 2, 0),
+	MX6_PAD_I2C1_SCL__GPIO_3_12				= IOMUX_PAD(0x044C, 0x015C, 5, 0x0000, 0, 0),
 };
 #endif	/* __ASM_ARCH_MX6_MX6SL_PINS_H__ */
diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c
index e8ea256be0..d46b8db232 100644
--- a/board/boundary/nitrogen6x/nitrogen6x.c
+++ b/board/boundary/nitrogen6x/nitrogen6x.c
@@ -1018,5 +1018,6 @@ int misc_init_r(void)
 #ifdef CONFIG_CMD_BMODE
 	add_board_boot_modes(board_boot_modes);
 #endif
+	setenv_hex("reset_cause", get_imx_reset_cause());
 	return 0;
 }
diff --git a/board/freescale/common/pfuze.c b/board/freescale/common/pfuze.c
index 2cd1794429..4980bf7b00 100644
--- a/board/freescale/common/pfuze.c
+++ b/board/freescale/common/pfuze.c
@@ -5,9 +5,47 @@
  */
 
 #include <common.h>
+#include <errno.h>
 #include <power/pmic.h>
 #include <power/pfuze100_pmic.h>
 
+int pfuze_mode_init(struct pmic *p, u32 mode)
+{
+	unsigned char offset, i, switch_num;
+	u32 id, ret;
+
+	pmic_reg_read(p, PFUZE100_DEVICEID, &id);
+	id = id & 0xf;
+
+	if (id == 0) {
+		switch_num = 6;
+		offset = PFUZE100_SW1CMODE;
+	} else if (id == 1) {
+		switch_num = 4;
+		offset = PFUZE100_SW2MODE;
+	} else {
+		printf("Not supported, id=%d\n", id);
+		return -EINVAL;
+	}
+
+	ret = pmic_reg_write(p, PFUZE100_SW1ABMODE, mode);
+	if (ret < 0) {
+		printf("Set SW1AB mode error!\n");
+		return ret;
+	}
+
+	for (i = 0; i < switch_num - 1; i++) {
+		ret = pmic_reg_write(p, offset + i * SWITCH_SIZE, mode);
+		if (ret < 0) {
+			printf("Set switch 0x%x mode error!\n",
+			       offset + i * SWITCH_SIZE);
+			return ret;
+		}
+	}
+
+	return ret;
+}
+
 struct pmic *pfuze_common_init(unsigned char i2cbus)
 {
 	struct pmic *p;
diff --git a/board/freescale/common/pfuze.h b/board/freescale/common/pfuze.h
index 7a4126cca0..53cfc99225 100644
--- a/board/freescale/common/pfuze.h
+++ b/board/freescale/common/pfuze.h
@@ -8,5 +8,6 @@
 #define __PFUZE_BOARD_HELPER__
 
 struct pmic *pfuze_common_init(unsigned char i2cbus);
+int pfuze_mode_init(struct pmic *p, u32 mode);
 
 #endif
diff --git a/board/freescale/mx25pdk/mx25pdk.c b/board/freescale/mx25pdk/mx25pdk.c
index 71a395c226..01dac72e85 100644
--- a/board/freescale/mx25pdk/mx25pdk.c
+++ b/board/freescale/mx25pdk/mx25pdk.c
@@ -146,8 +146,8 @@ int board_late_init(void)
 	if (!p)
 		return -ENODEV;
 
-	/* Turn on Ethernet PHY supply */
-	pmic_reg_write(p, MC34704_GENERAL2_REG, ONOFFE);
+	/* Turn on Ethernet PHY and LCD supplies */
+	pmic_reg_write(p, MC34704_GENERAL2_REG, ONOFFE | ONOFFA);
 
 	return 0;
 }
diff --git a/board/freescale/mx53loco/mx53loco.c b/board/freescale/mx53loco/mx53loco.c
index efcf4b390d..9ece6ecd8b 100644
--- a/board/freescale/mx53loco/mx53loco.c
+++ b/board/freescale/mx53loco/mx53loco.c
@@ -366,22 +366,6 @@ int board_early_init_f(void)
 	return 0;
 }
 
-#if defined(CONFIG_DISPLAY_CPUINFO)
-int print_cpuinfo(void)
-{
-	u32 cpurev;
-
-	cpurev = get_cpu_rev();
-	printf("CPU:   Freescale i.MX%x family rev%d.%d at %d MHz\n",
-		(cpurev & 0xFF000) >> 12,
-		(cpurev & 0x000F0) >> 4,
-		(cpurev & 0x0000F) >> 0,
-		mxc_get_clock(MXC_ARM_CLK) / 1000000);
-	printf("Reset cause: %s\n", get_reset_cause());
-	return 0;
-}
-#endif
-
 /*
  * Do not overwrite the console
  * Use always serial for U-Boot console
diff --git a/board/freescale/mx6qsabreauto/mx6qsabreauto.c b/board/freescale/mx6qsabreauto/mx6qsabreauto.c
index a90360f2df..b76e4eb528 100644
--- a/board/freescale/mx6qsabreauto/mx6qsabreauto.c
+++ b/board/freescale/mx6qsabreauto/mx6qsabreauto.c
@@ -29,6 +29,7 @@
 #include <asm/arch/crm_regs.h>
 #include <pca953x.h>
 #include <power/pmic.h>
+#include <power/pfuze100_pmic.h>
 #include "../common/pfuze.h"
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -494,11 +495,16 @@ int board_spi_cs_gpio(unsigned bus, unsigned cs)
 int power_init_board(void)
 {
 	struct pmic *p;
+	unsigned int ret;
 
 	p = pfuze_common_init(I2C_PMIC);
 	if (!p)
 		return -ENODEV;
 
+	ret = pfuze_mode_init(p, APS_PFM);
+	if (ret < 0)
+		return ret;
+
 	return 0;
 }
 
diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c
index 2f7198d3bf..bb2dd9624b 100644
--- a/board/freescale/mx6sabresd/mx6sabresd.c
+++ b/board/freescale/mx6sabresd/mx6sabresd.c
@@ -631,12 +631,16 @@ int board_init(void)
 int power_init_board(void)
 {
 	struct pmic *p;
-	unsigned int reg;
+	unsigned int reg, ret;
 
 	p = pfuze_common_init(I2C_PMIC);
 	if (!p)
 		return -ENODEV;
 
+	ret = pfuze_mode_init(p, APS_PFM);
+	if (ret < 0)
+		return ret;
+
 	/* Increase VGEN3 from 2.5 to 2.8V */
 	pmic_reg_read(p, PFUZE100_VGEN3VOL, &reg);
 	reg &= ~LDO_VOL_MASK;
diff --git a/board/freescale/mx6slevk/mx6slevk.c b/board/freescale/mx6slevk/mx6slevk.c
index 838ea6c0f0..7c18c90bce 100644
--- a/board/freescale/mx6slevk/mx6slevk.c
+++ b/board/freescale/mx6slevk/mx6slevk.c
@@ -13,13 +13,18 @@
 #include <asm/arch/sys_proto.h>
 #include <asm/gpio.h>
 #include <asm/imx-common/iomux-v3.h>
+#include <asm/imx-common/mxc_i2c.h>
 #include <asm/imx-common/spi.h>
 #include <asm/io.h>
 #include <linux/sizes.h>
 #include <common.h>
 #include <fsl_esdhc.h>
+#include <i2c.h>
 #include <mmc.h>
 #include <netdev.h>
+#include <power/pmic.h>
+#include <power/pfuze100_pmic.h>
+#include "../common/pfuze.h"
 #include <usb.h>
 #include <usb/ehci-fsl.h>
 
@@ -40,6 +45,16 @@ DECLARE_GLOBAL_DATA_PTR;
 #define SPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_SPEED_MED | \
 		      PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
 
+#define I2C_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE |		\
+		      PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED |	\
+		      PAD_CTL_DSE_40ohm | PAD_CTL_HYS |		\
+		      PAD_CTL_ODE | PAD_CTL_SRE_FAST)
+
+#define OTGID_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE |		\
+			PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW |\
+			PAD_CTL_DSE_80ohm | PAD_CTL_HYS |	\
+			PAD_CTL_SRE_FAST)
+
 #define ETH_PHY_RESET	IMX_GPIO_NR(4, 21)
 
 int dram_init(void)
@@ -221,6 +236,34 @@ int board_mmc_init(bd_t *bis)
 	return 0;
 }
 
+#ifdef CONFIG_SYS_I2C_MXC
+#define PC	MUX_PAD_CTRL(I2C_PAD_CTRL)
+/* I2C1 for PMIC */
+struct i2c_pads_info i2c_pad_info1 = {
+	.sda = {
+		.i2c_mode = MX6_PAD_I2C1_SDA__I2C1_SDA | PC,
+		.gpio_mode = MX6_PAD_I2C1_SDA__GPIO_3_13 | PC,
+		.gp = IMX_GPIO_NR(3, 13),
+	},
+	.scl = {
+		.i2c_mode = MX6_PAD_I2C1_SCL__I2C1_SCL | PC,
+		.gpio_mode = MX6_PAD_I2C1_SCL__GPIO_3_12 | PC,
+		.gp = IMX_GPIO_NR(3, 12),
+	},
+};
+
+int power_init_board(void)
+{
+	struct pmic *p;
+
+	p = pfuze_common_init(I2C_PMIC);
+	if (!p)
+		return -ENODEV;
+
+	return pfuze_mode_init(p, APS_PFM);
+}
+#endif
+
 #ifdef CONFIG_FEC_MXC
 int board_eth_init(bd_t *bis)
 {
@@ -247,7 +290,7 @@ static int setup_fec(void)
 static iomux_v3_cfg_t const usb_otg_pads[] = {
 	/* OTG1 */
 	MX6_PAD_KEY_COL4__USB_USBOTG1_PWR | MUX_PAD_CTRL(NO_PAD_CTRL),
-	MX6_PAD_EPDC_PWRCOM__ANATOP_USBOTG1_ID | MUX_PAD_CTRL(NO_PAD_CTRL),
+	MX6_PAD_EPDC_PWRCOM__ANATOP_USBOTG1_ID | MUX_PAD_CTRL(OTGID_PAD_CTRL),
 	/* OTG2 */
 	MX6_PAD_KEY_COL5__USB_USBOTG2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL)
 };
@@ -297,6 +340,10 @@ int board_init(void)
 	/* address of boot parameters */
 	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
 
+#ifdef CONFIG_SYS_I2C_MXC
+	setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
+#endif
+
 #ifdef	CONFIG_FEC_MXC
 	setup_fec();
 #endif
diff --git a/board/freescale/mx6sxsabresd/mx6sxsabresd.c b/board/freescale/mx6sxsabresd/mx6sxsabresd.c
index a2c9aae32c..2ff960e3bb 100644
--- a/board/freescale/mx6sxsabresd/mx6sxsabresd.c
+++ b/board/freescale/mx6sxsabresd/mx6sxsabresd.c
@@ -199,12 +199,16 @@ static struct i2c_pads_info i2c_pad_info1 = {
 int power_init_board(void)
 {
 	struct pmic *p;
-	unsigned int reg;
+	unsigned int reg, ret;
 
 	p = pfuze_common_init(I2C_PMIC);
 	if (!p)
 		return -ENODEV;
 
+	ret = pfuze_mode_init(p, APS_PFM);
+	if (ret < 0)
+		return ret;
+
 	/* Enable power of VGEN5 3V3, needed for SD3 */
 	pmic_reg_read(p, PFUZE100_VGEN5VOL, &reg);
 	reg &= ~LDO_VOL_MASK;
diff --git a/board/tbs/tbs2910/tbs2910.c b/board/tbs/tbs2910/tbs2910.c
index dfa430e4ab..42b166d47e 100644
--- a/board/tbs/tbs2910/tbs2910.c
+++ b/board/tbs/tbs2910/tbs2910.c
@@ -326,21 +326,25 @@ static void setup_display(void)
 	reg &= ~BM_ANADIG_PLL_VIDEO_BYPASS;
 	writel(reg, &ccm->analog_pll_video);
 
-	/* select video pll for ldb_di0_clk */
-	reg = readl(&ccm->cs2cdr);
-	reg &= ~(MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK);
-	writel(reg, &ccm->cs2cdr);
+	/* gate ipu1_di0_clk */
+	reg = readl(&ccm->CCGR3);
+	reg &= ~MXC_CCM_CCGR3_LDB_DI0_MASK;
+	writel(reg, &ccm->CCGR3);
 
-	/* select ldb_di0_clk / 7 for ldb_di0_ipu_clk */
-	reg = readl(&ccm->cscmr2);
-	reg |= MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV;
-	writel(reg, &ccm->cscmr2);
-
-	/* select ldb_di0_ipu_clk for ipu1_di0_clk -> 65MHz pixclock */
+	/* select video_pll clock / 7  for ipu1_di0_clk -> 65MHz pixclock */
 	reg = readl(&ccm->chsccdr);
-	reg |= (CHSCCDR_CLK_SEL_LDB_DI0
-		<< MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET);
+	reg &= ~(MXC_CCM_CHSCCDR_IPU1_DI0_PRE_CLK_SEL_MASK |
+		 MXC_CCM_CHSCCDR_IPU1_DI0_PODF_MASK |
+		 MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_MASK);
+	reg |= (2 << MXC_CCM_CHSCCDR_IPU1_DI0_PRE_CLK_SEL_OFFSET) |
+	       (6 << MXC_CCM_CHSCCDR_IPU1_DI0_PODF_OFFSET) |
+	       (0 << MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET);
 	writel(reg, &ccm->chsccdr);
+
+	/* enable ipu1_di0_clk */
+	reg = readl(&ccm->CCGR3);
+	reg |= MXC_CCM_CCGR3_LDB_DI0_MASK;
+	writel(reg, &ccm->CCGR3);
 }
 #endif /* CONFIG_VIDEO_IPUV3 */
 
diff --git a/board/warp/Kconfig b/board/warp/Kconfig
new file mode 100644
index 0000000000..7b569ccb64
--- /dev/null
+++ b/board/warp/Kconfig
@@ -0,0 +1,12 @@
+if TARGET_WARP
+
+config SYS_BOARD
+	default "warp"
+
+config SYS_SOC
+	default "mx6"
+
+config SYS_CONFIG_NAME
+	default "warp"
+
+endif
diff --git a/board/warp/MAINTAINERS b/board/warp/MAINTAINERS
new file mode 100644
index 0000000000..ee2114d082
--- /dev/null
+++ b/board/warp/MAINTAINERS
@@ -0,0 +1,6 @@
+WaRP BOARD
+M:	Otavio Salvador <otavio@ossystems.com.br>
+S:	Maintained
+F:	board/warp/
+F:	include/configs/warp.h
+F:	configs/warp_defconfig
diff --git a/board/warp/Makefile b/board/warp/Makefile
new file mode 100644
index 0000000000..c555f87397
--- /dev/null
+++ b/board/warp/Makefile
@@ -0,0 +1,8 @@
+# Copyright (C) 2014 O.S. Systems Software LTDA.
+# Copyright (C) 2014 Kynetics LLC.
+# Copyright (C) 2014 Revolution Robotics, Inc.
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y  := warp.o
diff --git a/board/warp/warp.c b/board/warp/warp.c
new file mode 100644
index 0000000000..21ac5e7d74
--- /dev/null
+++ b/board/warp/warp.c
@@ -0,0 +1,119 @@
+/*
+ * Copyright (C) 2014, 2015 O.S. Systems Software LTDA.
+ * Copyright (C) 2014 Kynetics LLC.
+ * Copyright (C) 2014 Revolution Robotics, Inc.
+ *
+ * Author: Otavio Salvador <otavio@ossystems.com.br>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <asm/arch/clock.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/mx6-pins.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/gpio.h>
+#include <asm/imx-common/iomux-v3.h>
+#include <asm/io.h>
+#include <linux/sizes.h>
+#include <common.h>
+#include <watchdog.h>
+#include <fsl_esdhc.h>
+#include <mmc.h>
+#include <usb.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
+	PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
+	PAD_CTL_SRE_FAST  | PAD_CTL_HYS | \
+	PAD_CTL_LVE)
+
+#define USDHC_PAD_CTRL (PAD_CTL_PUS_22K_UP | \
+	PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \
+	PAD_CTL_SRE_FAST  | PAD_CTL_HYS | \
+	PAD_CTL_LVE)
+
+int dram_init(void)
+{
+	gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
+
+	return 0;
+}
+
+static void setup_iomux_uart(void)
+{
+	static iomux_v3_cfg_t const uart1_pads[] = {
+		MX6_PAD_UART1_TXD__UART1_TXD | MUX_PAD_CTRL(UART_PAD_CTRL),
+		MX6_PAD_UART1_RXD__UART1_RXD | MUX_PAD_CTRL(UART_PAD_CTRL),
+	};
+
+	imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
+}
+
+static struct fsl_esdhc_cfg usdhc_cfg[1] = {
+	{USDHC2_BASE_ADDR},
+};
+
+int board_mmc_getcd(struct mmc *mmc)
+{
+	return 1;	/* Assume boot SD always present */
+}
+
+int board_mmc_init(bd_t *bis)
+{
+	static iomux_v3_cfg_t const usdhc2_pads[] = {
+		MX6_PAD_SD2_CLK__USDHC2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+		MX6_PAD_SD2_CMD__USDHC2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+		MX6_PAD_SD2_RST__USDHC2_RST | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+		MX6_PAD_SD2_DAT0__USDHC2_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+		MX6_PAD_SD2_DAT1__USDHC2_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+		MX6_PAD_SD2_DAT2__USDHC2_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+		MX6_PAD_SD2_DAT3__USDHC2_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+		MX6_PAD_SD2_DAT4__USDHC2_DAT4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+		MX6_PAD_SD2_DAT5__USDHC2_DAT5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+		MX6_PAD_SD2_DAT6__USDHC2_DAT6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+		MX6_PAD_SD2_DAT7__USDHC2_DAT7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	};
+
+	imx_iomux_v3_setup_multiple_pads(usdhc2_pads, ARRAY_SIZE(usdhc2_pads));
+
+	usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
+	return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
+}
+
+int board_usb_phy_mode(int port)
+{
+	return USB_INIT_DEVICE;
+}
+
+int board_early_init_f(void)
+{
+	setup_iomux_uart();
+	return 0;
+}
+
+int board_init(void)
+{
+	/* address of boot parameters */
+	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+	return 0;
+}
+
+int board_late_init(void)
+{
+#ifdef CONFIG_HW_WATCHDOG
+	hw_watchdog_init();
+#endif
+
+	return 0;
+}
+
+int checkboard(void)
+{
+	puts("Board: WaRP Board\n");
+
+	return 0;
+}
diff --git a/common/cmd_eeprom.c b/common/cmd_eeprom.c
index 29f0f1f784..e9904cd698 100644
--- a/common/cmd_eeprom.c
+++ b/common/cmd_eeprom.c
@@ -161,6 +161,9 @@ int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt
 #if defined(CONFIG_SPI) && !defined(CONFIG_ENV_EEPROM_IS_ON_I2C)
 		spi_read (addr, alen, buffer, len);
 #else
+#if defined(CONFIG_SYS_I2C_EEPROM_BUS)
+		i2c_set_bus_num(CONFIG_SYS_I2C_EEPROM_BUS);
+#endif
 		if (i2c_read(addr[0], offset, alen - 1, buffer, len))
 			rcode = 1;
 #endif
@@ -339,6 +342,9 @@ int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cn
 		/* Write is enabled ... now write eeprom value.
 		 */
 #endif
+#if defined(CONFIG_SYS_I2C_EEPROM_BUS)
+		i2c_set_bus_num(CONFIG_SYS_I2C_EEPROM_BUS);
+#endif
 		if (i2c_write(addr[0], offset, alen - 1, buffer, len))
 			rcode = 1;
 
diff --git a/configs/warp_defconfig b/configs/warp_defconfig
new file mode 100644
index 0000000000..624a8affb3
--- /dev/null
+++ b/configs/warp_defconfig
@@ -0,0 +1,3 @@
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6slevk/imximage.cfg,MX6SL"
+CONFIG_ARM=y
+CONFIG_TARGET_WARP=y
diff --git a/doc/README.fsl-esdhc b/doc/README.fsl-esdhc
index b70f271d1a..619c6b2d07 100644
--- a/doc/README.fsl-esdhc
+++ b/doc/README.fsl-esdhc
@@ -1,5 +1,6 @@
 CONFIG_SYS_FSL_ESDHC_LE means ESDHC IP is in little-endian mode.
 CONFIG_SYS_FSL_ESDHC_BE means ESDHC IP is in big-endian mode.
+CONFIG_SYS_FSL_ESDHC_FORCE_VSELECT forces to run at 1.8V.
 
 Accessing ESDHC registers can be determined by ESDHC IP's endian
 mode or processor's endian mode.
diff --git a/doc/README.mxc_hab b/doc/README.mxc_hab
index 43e64a2797..e9340dd14c 100644
--- a/doc/README.mxc_hab
+++ b/doc/README.mxc_hab
@@ -46,3 +46,51 @@ cat u-boot.imx U-Boot_CSF_pad.bin > u-boot-signed.imx
 
 NOTE: U-Boot_CSF.bin needs to be padded to the value specified in
 the imximage.cfg file.
+
+Setup U-Boot Image for Encrypted Boot
+-------------------------------------
+An authenticated U-Boot image is used as starting point for
+Encrypted Boot. The image is encrypted by Freescale's Code
+Signing Tool (CST). The CST replaces only the image data of
+u-boot.imx with the encrypted data. The Initial Vector Table,
+DCD, and Boot data, remains in plaintext.
+
+The image data is encrypted with a Encryption Key (DEK).
+Therefore, this key is needed to decrypt the data during the
+booting process. The DEK is protected by wrapping it in a Blob,
+which needs to be appended to the U-Boot image and specified in
+the CSF file.
+
+The DEK blob is generated by an authenticated U-Boot image with
+the dek_blob cmd enabled. The image used for DEK blob generation
+needs to have the following configurations enabled:
+
+CONFIG_SECURE_BOOT
+CONFIG_SYS_FSL_SEC_COMPAT    4 /* HAB version */
+CONFIG_FSL_CAAM
+CONFIG_CMD_DEKBLOB
+
+Note: The encrypted boot feature is only supported by HABv4 or
+greater.
+
+The dek_blob command then can be used to generate the DEK blob of
+a DEK previously loaded in memory. The command is used as follows:
+
+dek_blob <DEK address> <Output Address> <Key Size in Bits>
+example: dek_blob 0x10800000 0x10801000 192
+
+The resulting DEK blob then is used to construct the encrypted
+U-Boot image. Note that the blob needs to be transferred back
+to the host.Then the following commands are used to construct
+the final image.
+
+objcopy -I binary -O binary --pad-to 0x2000 --gap-fill=0x00 \
+    U-Boot_CSF.bin U-Boot_CSF_pad.bin
+cat u-boot.imx U-Boot_CSF_pad.bin > u-boot-signed.imx
+objcopy -I binary -O binary --pad-to <blob_dst> --gap-fill=0x00 \
+    u-boot-signed.imx u-boot-signed-pad.bin
+cat u-boot-signed-pad.imx DEK_blob.bin > u-boot-encrypted.imx
+
+    NOTE: u-boot-signed.bin needs to be padded to the value
+    equivalent to the address in which the DEK blob is specified
+    in the CSF.
diff --git a/drivers/crypto/fsl/Makefile b/drivers/crypto/fsl/Makefile
index c0cf64229e..4aa91e4393 100644
--- a/drivers/crypto/fsl/Makefile
+++ b/drivers/crypto/fsl/Makefile
@@ -8,5 +8,5 @@
 
 obj-y += sec.o
 obj-$(CONFIG_FSL_CAAM) += jr.o fsl_hash.o jobdesc.o error.o
-obj-$(CONFIG_CMD_BLOB) += fsl_blob.o
+obj-$(CONFIG_CMD_BLOB)$(CONFIG_CMD_DEKBLOB) += fsl_blob.o
 obj-$(CONFIG_RSA_FREESCALE_EXP) += fsl_rsa.o
diff --git a/drivers/crypto/fsl/desc.h b/drivers/crypto/fsl/desc.h
index 504f2b07d0..18e2ec8d26 100644
--- a/drivers/crypto/fsl/desc.h
+++ b/drivers/crypto/fsl/desc.h
@@ -12,11 +12,18 @@
 #ifndef DESC_H
 #define DESC_H
 
+#define KEY_BLOB_SIZE		32
+#define MAC_SIZE			16
+
 /* Max size of any CAAM descriptor in 32-bit words, inclusive of header */
 #define MAX_CAAM_DESCSIZE	64
 
+/* Size of DEK Blob  descriptor, inclusive of header */
+#define DEK_BLOB_DESCSIZE	9
+
 /* Block size of any entity covered/uncovered with a KEK/TKEK */
 #define KEK_BLOCKSIZE		16
+
 /*
  * Supported descriptor command types as they show up
  * inside a descriptor command word.
@@ -273,6 +280,13 @@
 #define LDLEN_SET_OFIFO_OFFSET_MASK	(3 << LDLEN_SET_OFIFO_OFFSET_SHIFT)
 
 /*
+ * AAD Definitions
+ */
+#define AES_KEY_SHIFT		8
+#define LD_CCM_MODE		0x66
+#define KEY_AES_SRC		(0x55 << AES_KEY_SHIFT)
+
+/*
  * FIFO_LOAD/FIFO_STORE/SEQ_FIFO_LOAD/SEQ_FIFO_STORE
  * Command Constructs
  */
@@ -418,6 +432,7 @@
 #define OP_PCLID_MASK		(0xff << 16)
 
 /* Assuming OP_TYPE = OP_TYPE_UNI_PROTOCOL */
+#define OP_PCLID_SECMEM		0x08
 #define OP_PCLID_BLOB		(0x0d << OP_PCLID_SHIFT)
 #define OP_PCLID_SECRETKEY	(0x11 << OP_PCLID_SHIFT)
 #define OP_PCLID_PUBLICKEYPAIR	(0x14 << OP_PCLID_SHIFT)
diff --git a/drivers/crypto/fsl/fsl_blob.c b/drivers/crypto/fsl/fsl_blob.c
index 9923bcbfe9..8b25921272 100644
--- a/drivers/crypto/fsl/fsl_blob.c
+++ b/drivers/crypto/fsl/fsl_blob.c
@@ -7,6 +7,8 @@
 
 #include <common.h>
 #include <malloc.h>
+#include <fsl_sec.h>
+#include <asm-generic/errno.h>
 #include "jobdesc.h"
 #include "desc.h"
 #include "jr.h"
@@ -59,3 +61,53 @@ int blob_encap(u8 *key_mod, u8 *src, u8 *dst, u32 len)
 	free(desc);
 	return ret;
 }
+
+#ifdef CONFIG_CMD_DEKBLOB
+int blob_dek(const u8 *src, u8 *dst, u8 len)
+{
+	int ret, size, i = 0;
+	u32 *desc;
+
+	int out_sz =  WRP_HDR_SIZE + len + KEY_BLOB_SIZE + MAC_SIZE;
+
+	puts("\nEncapsulating provided DEK to form blob\n");
+	desc = memalign(ARCH_DMA_MINALIGN,
+			sizeof(uint32_t) * DEK_BLOB_DESCSIZE);
+	if (!desc) {
+		debug("Not enough memory for descriptor allocation\n");
+		return -ENOMEM;
+	}
+
+	ret = inline_cnstr_jobdesc_blob_dek(desc, src, dst, len);
+	if (ret) {
+		debug("Error in Job Descriptor Construction:  %d\n", ret);
+	} else {
+		size = roundup(sizeof(uint32_t) * DEK_BLOB_DESCSIZE,
+			      ARCH_DMA_MINALIGN);
+		flush_dcache_range((unsigned long)desc,
+				   (unsigned long)desc + size);
+		size = roundup(sizeof(uint8_t) * out_sz, ARCH_DMA_MINALIGN);
+		flush_dcache_range((unsigned long)dst,
+				   (unsigned long)dst + size);
+
+		ret = run_descriptor_jr(desc);
+	}
+
+	if (ret) {
+		debug("Error in Encapsulation %d\n", ret);
+	   goto err;
+	}
+
+	size = roundup(out_sz, ARCH_DMA_MINALIGN);
+	invalidate_dcache_range((unsigned long)dst, (unsigned long)dst+size);
+
+	puts("DEK Blob\n");
+	for (i = 0; i < out_sz; i++)
+		printf("%02X", ((uint8_t *)dst)[i]);
+	printf("\n");
+
+err:
+	free(desc);
+	return ret;
+}
+#endif
diff --git a/drivers/crypto/fsl/jobdesc.c b/drivers/crypto/fsl/jobdesc.c
index cc0dcede7b..5695bef6fd 100644
--- a/drivers/crypto/fsl/jobdesc.c
+++ b/drivers/crypto/fsl/jobdesc.c
@@ -9,12 +9,157 @@
  */
 
 #include <common.h>
+#include <fsl_sec.h>
 #include "desc_constr.h"
 #include "jobdesc.h"
 #include "rsa_caam.h"
 
-#define KEY_BLOB_SIZE			32
-#define MAC_SIZE			16
+#ifdef CONFIG_MX6
+/*!
+ * Secure memory run command
+ *
+ * @param   sec_mem_cmd  Secure memory command register
+ * @return  cmd_status  Secure memory command status register
+ */
+uint32_t secmem_set_cmd(uint32_t sec_mem_cmd)
+{
+	uint32_t temp_reg;
+
+	sec_out32(CAAM_SMCJR0, sec_mem_cmd);
+
+	do {
+		temp_reg = sec_in32(CAAM_SMCSJR0);
+	} while (temp_reg & CMD_COMPLETE);
+
+	return temp_reg;
+}
+
+/*!
+ * CAAM page allocation:
+ * Allocates a partition from secure memory, with the id
+ * equal to partion_num. This will de-allocate the page
+ * if it is already allocated. The partition will have
+ * full access permissions. The permissions are set before,
+ * running a job descriptor. A memory page of secure RAM
+ * is allocated for the partition.
+ *
+ * @param   page  Number of the page to allocate.
+ * @param   partition  Number of the partition to allocate.
+ * @return  0 on success, ERROR_IN_PAGE_ALLOC otherwise
+ */
+int caam_page_alloc(uint8_t page_num, uint8_t partition_num)
+{
+	uint32_t temp_reg;
+
+	/*
+	 * De-Allocate partition_num if already allocated to ARM core
+	 */
+	if (sec_in32(CAAM_SMPO_0) & PARTITION_OWNER(partition_num)) {
+		temp_reg = secmem_set_cmd(PARTITION(partition_num) |
+						CMD_PART_DEALLOC);
+		if (temp_reg & SMCSJR_AERR) {
+			printf("Error: De-allocation status 0x%X\n", temp_reg);
+			return ERROR_IN_PAGE_ALLOC;
+		}
+	}
+
+	/* set the access rights to allow full access */
+	sec_out32(CAAM_SMAG1JR0(partition_num), 0xF);
+	sec_out32(CAAM_SMAG2JR0(partition_num), 0xF);
+	sec_out32(CAAM_SMAPJR0(partition_num), 0xFF);
+
+	/* Now need to allocate partition_num of secure RAM. */
+	/* De-Allocate page_num by starting with a page inquiry command */
+	temp_reg = secmem_set_cmd(PAGE(page_num) | CMD_INQUIRY);
+
+	/* if the page is owned, de-allocate it */
+	if ((temp_reg & SMCSJR_PO) == PAGE_OWNED) {
+		temp_reg = secmem_set_cmd(PAGE(page_num) | CMD_PAGE_DEALLOC);
+		if (temp_reg & SMCSJR_AERR) {
+			printf("Error: Allocation status 0x%X\n", temp_reg);
+			return ERROR_IN_PAGE_ALLOC;
+		}
+	}
+
+	/* Allocate page_num to partition_num */
+	temp_reg = secmem_set_cmd(PAGE(page_num) | PARTITION(partition_num)
+						| CMD_PAGE_ALLOC);
+	if (temp_reg & SMCSJR_AERR) {
+		printf("Error: Allocation status 0x%X\n", temp_reg);
+		return ERROR_IN_PAGE_ALLOC;
+	}
+	/* page inquiry command to ensure that the page was allocated */
+	temp_reg = secmem_set_cmd(PAGE(page_num) | CMD_INQUIRY);
+
+	/* if the page is not owned => problem */
+	if ((temp_reg & SMCSJR_PO) != PAGE_OWNED) {
+		printf("Allocation of page %d in partition %d failed 0x%X\n",
+		       temp_reg, page_num, partition_num);
+
+		return ERROR_IN_PAGE_ALLOC;
+	}
+
+	return 0;
+}
+
+int inline_cnstr_jobdesc_blob_dek(uint32_t *desc, const uint8_t *plain_txt,
+				       uint8_t *dek_blob, uint32_t in_sz)
+{
+	uint32_t ret = 0;
+	u32 aad_w1, aad_w2;
+	/* output blob will have 32 bytes key blob in beginning and
+	 * 16 byte HMAC identifier at end of data blob */
+	uint32_t out_sz = in_sz + KEY_BLOB_SIZE + MAC_SIZE;
+	/* Setting HDR for blob */
+	uint8_t wrapped_key_hdr[8] = {HDR_TAG, 0x00, WRP_HDR_SIZE + out_sz,
+			     HDR_PAR, HAB_MOD, HAB_ALG, in_sz, HAB_FLG};
+
+	/* initialize the blob array */
+	memset(dek_blob, 0, out_sz + 8);
+	/* Copy the header into the DEK blob buffer */
+	memcpy(dek_blob, wrapped_key_hdr, sizeof(wrapped_key_hdr));
+
+	/* allocating secure memory */
+	ret = caam_page_alloc(PAGE_1, PARTITION_1);
+	if (ret)
+		return ret;
+
+	/* Write DEK to secure memory */
+	memcpy((uint32_t *)SEC_MEM_PAGE1, (uint32_t *)plain_txt, in_sz);
+
+	unsigned long start = (unsigned long)SEC_MEM_PAGE1 &
+				~(ARCH_DMA_MINALIGN - 1);
+	unsigned long end = ALIGN(start + 0x1000, ARCH_DMA_MINALIGN);
+	flush_dcache_range(start, end);
+
+	/* Now configure the access rights of the partition */
+	sec_out32(CAAM_SMAG1JR0(PARTITION_1), KS_G1); /* set group 1 */
+	sec_out32(CAAM_SMAG2JR0(PARTITION_1), 0);     /* clear group 2 */
+	sec_out32(CAAM_SMAPJR0(PARTITION_1), PERM);   /* set perm & locks */
+
+	/* construct aad for AES */
+	aad_w1 = (in_sz << OP_ALG_ALGSEL_SHIFT) | KEY_AES_SRC | LD_CCM_MODE;
+	aad_w2 = 0x0;
+
+	init_job_desc(desc, 0);
+
+	append_cmd(desc, CMD_LOAD | CLASS_2 | KEY_IMM | KEY_ENC |
+				(0x0c << LDST_OFFSET_SHIFT) | 0x08);
+
+	append_u32(desc, aad_w1);
+
+	append_u32(desc, aad_w2);
+
+	append_cmd_ptr(desc, (dma_addr_t)SEC_MEM_PAGE1, in_sz, CMD_SEQ_IN_PTR);
+
+	append_cmd_ptr(desc, (dma_addr_t)dek_blob + 8, out_sz, CMD_SEQ_OUT_PTR);
+
+	append_operation(desc, OP_TYPE_ENCAP_PROTOCOL | OP_PCLID_BLOB |
+						OP_PCLID_SECMEM);
+
+	return ret;
+}
+#endif
 
 void inline_cnstr_jobdesc_hash(uint32_t *desc,
 			  const uint8_t *msg, uint32_t msgsz, uint8_t *digest,
diff --git a/drivers/crypto/fsl/jobdesc.h b/drivers/crypto/fsl/jobdesc.h
index 84b3edd6e2..112404c74d 100644
--- a/drivers/crypto/fsl/jobdesc.h
+++ b/drivers/crypto/fsl/jobdesc.h
@@ -14,6 +14,20 @@
 
 #define KEY_IDNFR_SZ_BYTES		16
 
+#ifdef CONFIG_CMD_DEKBLOB
+/* inline_cnstr_jobdesc_blob_dek:
+ * Intializes and constructs the job descriptor for DEK encapsulation
+ * using the given parameters.
+ * @desc: reference to the job descriptor
+ * @plain_txt: reference to the DEK
+ * @enc_blob: reference where to store the blob
+ * @in_sz: size in bytes of the DEK
+ * @return: 0 on success, ECONSTRJDESC otherwise
+ */
+int inline_cnstr_jobdesc_blob_dek(uint32_t *desc, const uint8_t *plain_txt,
+				uint8_t *enc_blob, uint32_t in_sz);
+#endif
+
 void inline_cnstr_jobdesc_hash(uint32_t *desc,
 			  const uint8_t *msg, uint32_t msgsz, uint8_t *digest,
 			  u32 alg_type, uint32_t alg_size, int sg_tbl);
diff --git a/drivers/crypto/fsl/jr.c b/drivers/crypto/fsl/jr.c
index f9d4938834..f99d59480c 100644
--- a/drivers/crypto/fsl/jr.c
+++ b/drivers/crypto/fsl/jr.c
@@ -90,11 +90,13 @@ static int jr_init(void)
 	jr.liodn = DEFAULT_JR_LIODN;
 #endif
 	jr.size = JR_SIZE;
-	jr.input_ring = (dma_addr_t *)malloc(JR_SIZE * sizeof(dma_addr_t));
+	jr.input_ring = (dma_addr_t *)memalign(ARCH_DMA_MINALIGN,
+				JR_SIZE * sizeof(dma_addr_t));
 	if (!jr.input_ring)
 		return -1;
 	jr.output_ring =
-	    (struct op_ring *)malloc(JR_SIZE * sizeof(struct op_ring));
+	    (struct op_ring *)memalign(ARCH_DMA_MINALIGN,
+				JR_SIZE * sizeof(struct op_ring));
 	if (!jr.output_ring)
 		return -1;
 
@@ -163,13 +165,23 @@ static int jr_enqueue(uint32_t *desc_addr,
 	    CIRC_SPACE(jr.head, jr.tail, jr.size) <= 0)
 		return -1;
 
-	jr.input_ring[head] = desc_phys_addr;
 	jr.info[head].desc_phys_addr = desc_phys_addr;
 	jr.info[head].desc_addr = (uint32_t)desc_addr;
 	jr.info[head].callback = (void *)callback;
 	jr.info[head].arg = arg;
 	jr.info[head].op_done = 0;
 
+	unsigned long start = (unsigned long)&jr.info[head] &
+					~(ARCH_DMA_MINALIGN - 1);
+	unsigned long end = ALIGN(start + sizeof(struct jr_info),
+					ARCH_DMA_MINALIGN);
+	flush_dcache_range(start, end);
+
+	jr.input_ring[head] = desc_phys_addr;
+	start = (unsigned long)&jr.input_ring[head] & ~(ARCH_DMA_MINALIGN - 1);
+	end = ALIGN(start + sizeof(dma_addr_t), ARCH_DMA_MINALIGN);
+	flush_dcache_range(start, end);
+
 	jr.head = (head + 1) & (jr.size - 1);
 
 	sec_out32(&regs->irja, 1);
@@ -187,6 +199,13 @@ static int jr_dequeue(void)
 	void *arg = NULL;
 
 	while (sec_in32(&regs->orsf) && CIRC_CNT(jr.head, jr.tail, jr.size)) {
+		unsigned long start = (unsigned long)jr.output_ring &
+					~(ARCH_DMA_MINALIGN - 1);
+		unsigned long end = ALIGN(start +
+					  sizeof(struct op_ring)*JR_SIZE,
+					  ARCH_DMA_MINALIGN);
+		invalidate_dcache_range(start, end);
+
 		found = 0;
 
 		dma_addr_t op_desc = jr.output_ring[jr.tail].desc;
@@ -333,13 +352,17 @@ static int instantiate_rng(void)
 
 	memset(&op, 0, sizeof(struct result));
 
-	desc = malloc(sizeof(int) * 6);
+	desc = memalign(ARCH_DMA_MINALIGN, sizeof(uint32_t) * 6);
 	if (!desc) {
 		printf("cannot allocate RNG init descriptor memory\n");
 		return -1;
 	}
 
 	inline_cnstr_jobdesc_rng_instantiation(desc);
+	int size = roundup(sizeof(uint32_t) * 6, ARCH_DMA_MINALIGN);
+	flush_dcache_range((unsigned long)desc,
+			   (unsigned long)desc + size);
+
 	ret = run_descriptor_jr(desc);
 
 	if (ret)
diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index f5d2ccba15..c5e270dd57 100644
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -54,19 +54,21 @@ struct fsl_esdhc {
 	uint    fevt;		/* Force event register */
 	uint    admaes;		/* ADMA error status register */
 	uint    adsaddr;	/* ADMA system address register */
-	char    reserved2[160];	/* reserved */
+	char    reserved2[100];	/* reserved */
+	uint    vendorspec;	/* Vendor Specific register */
+	char    reserved3[59];	/* reserved */
 	uint    hostver;	/* Host controller version register */
-	char    reserved3[4];	/* reserved */
-	uint    dmaerraddr;	/* DMA error address register */
 	char    reserved4[4];	/* reserved */
-	uint    dmaerrattr;	/* DMA error attribute register */
+	uint    dmaerraddr;	/* DMA error address register */
 	char    reserved5[4];	/* reserved */
+	uint    dmaerrattr;	/* DMA error attribute register */
+	char    reserved6[4];	/* reserved */
 	uint    hostcapblt2;	/* Host controller capabilities register 2 */
-	char    reserved6[8];	/* reserved */
+	char    reserved7[8];	/* reserved */
 	uint    tcr;		/* Tuning control register */
-	char    reserved7[28];	/* reserved */
+	char    reserved8[28];	/* reserved */
 	uint    sddirctl;	/* SD direction control register */
-	char    reserved8[712];	/* reserved */
+	char    reserved9[712];	/* reserved */
 	uint    scr;		/* eSDHC control register */
 };
 
@@ -342,6 +344,15 @@ esdhc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
 		goto out;
 	}
 
+	/* Switch voltage to 1.8V if CMD11 succeeded */
+	if (cmd->cmdidx == SD_CMD_SWITCH_UHS18V) {
+		esdhc_setbits32(&regs->vendorspec, ESDHC_VENDORSPEC_VSELECT);
+
+		printf("Run CMD11 1.8V switch\n");
+		/* Sleep for 5 ms - max time for card to switch to 1.8V */
+		udelay(5000);
+	}
+
 	/* Workaround for ESDHC errata ENGcm03648 */
 	if (!data && (cmd->resp_type & MMC_RSP_BUSY)) {
 		int timeout = 2500;
@@ -414,6 +425,10 @@ out:
 			while ((esdhc_read32(&regs->sysctl) & SYSCTL_RSTD))
 				;
 		}
+
+		/* If this was CMD11, then notify that power cycle is needed */
+		if (cmd->cmdidx == SD_CMD_SWITCH_UHS18V)
+			printf("CMD11 to switch to 1.8V mode failed, card requires power cycle.\n");
 	}
 
 	esdhc_write32(&regs->irqstat, -1);
@@ -509,6 +524,10 @@ static int esdhc_init(struct mmc *mmc)
 	/* Set timout to the maximum value */
 	esdhc_clrsetbits32(&regs->sysctl, SYSCTL_TIMEOUT_MASK, 14 << 16);
 
+#ifdef CONFIG_SYS_FSL_ESDHC_FORCE_VSELECT
+	esdhc_setbits32(&regs->vendorspec, ESDHC_VENDORSPEC_VSELECT);
+#endif
+
 	return 0;
 }
 
diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h
index 42bc3c869f..8d8b93cca5 100644
--- a/include/configs/mx53loco.h
+++ b/include/configs/mx53loco.h
@@ -24,6 +24,8 @@
 
 #define CONFIG_SYS_GENERIC_BOARD
 
+#define CONFIG_DISPLAY_CPUINFO
+
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(10 * 1024 * 1024)
 
diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h
index 4aa8101524..f0e37f0ca6 100644
--- a/include/configs/mx6sabre_common.h
+++ b/include/configs/mx6sabre_common.h
@@ -53,6 +53,8 @@
 #define CONFIG_GENERIC_MMC
 #define CONFIG_BOUNCE_BUFFER
 #define CONFIG_CMD_EXT2
+#define CONFIG_CMD_EXT4
+#define CONFIG_CMD_EXT4_WRITE
 #define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
 
@@ -276,4 +278,18 @@
 #define CONFIG_IMX_HDMI
 #define CONFIG_IMX_VIDEO_SKIP
 
+#define CONFIG_CI_UDC
+#define CONFIG_USBD_HS
+#define CONFIG_USB_GADGET_DUALSPEED
+
+#define CONFIG_USB_GADGET
+#define CONFIG_CMD_USB_MASS_STORAGE
+#define CONFIG_USB_GADGET_MASS_STORAGE
+#define CONFIG_USBDOWNLOAD_GADGET
+#define CONFIG_USB_GADGET_VBUS_DRAW	2
+
+#define CONFIG_G_DNL_VENDOR_NUM		0x0525
+#define CONFIG_G_DNL_PRODUCT_NUM	0xa4a5
+#define CONFIG_G_DNL_MANUFACTURER	"FSL"
+
 #endif                         /* __MX6QSABRE_COMMON_CONFIG_H */
diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h
index c567d9dbb6..122141846e 100644
--- a/include/configs/mx6slevk.h
+++ b/include/configs/mx6slevk.h
@@ -48,6 +48,18 @@
 #define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
 
+/* I2C Configs */
+#define CONFIG_CMD_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_SPEED		  100000
+
+/* PMIC */
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_PFUZE100
+#define CONFIG_POWER_PFUZE100_I2C_ADDR	0x08
+
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_MII
diff --git a/include/configs/ot1200.h b/include/configs/ot1200.h
index c061e93534..3c60b4f12b 100644
--- a/include/configs/ot1200.h
+++ b/include/configs/ot1200.h
@@ -131,6 +131,16 @@
 #define CONFIG_PHYLIB
 #define CONFIG_PHY_SMSC
 
+#ifndef CONFIG_SPL
+#define CONFIG_CMD_EEPROM
+#define CONFIG_ENV_EEPROM_IS_ON_I2C
+#define CONFIG_SYS_I2C_EEPROM_BUS             1
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN        1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS     3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
+#define CONFIG_SYS_I2C_MULTI_EEPROMS
+#endif
+
 /* Miscellaneous commands */
 #define CONFIG_CMD_BMODE
 #define CONFIG_CMD_SETEXPR
diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h
index c097b98575..7089378c96 100644
--- a/include/configs/tbs2910.h
+++ b/include/configs/tbs2910.h
@@ -165,6 +165,19 @@
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 #define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_USB_STORAGE
+#define CONFIG_CMD_USB_MASS_STORAGE
+#ifdef CONFIG_CMD_USB_MASS_STORAGE
+#define CONFIG_CI_UDC
+#define CONFIG_USBD_HS
+#define CONFIG_USB_GADGET
+#define CONFIG_USB_GADGET_MASS_STORAGE
+#define CONFIG_USB_GADGET_DUALSPEED
+#define CONFIG_USB_GADGET_VBUS_DRAW	0
+#define CONFIG_USBDOWNLOAD_GADGET
+#define CONFIG_G_DNL_VENDOR_NUM		0x0525
+#define CONFIG_G_DNL_PRODUCT_NUM	0xa4a5
+#define CONFIG_G_DNL_MANUFACTURER	"TBS"
+#endif /* CONFIG_CMD_USB_MASS_STORAGE */
 #define CONFIG_USB_KEYBOARD
 #ifdef CONFIG_USB_KEYBOARD
 #define CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE
diff --git a/include/configs/warp.h b/include/configs/warp.h
new file mode 100644
index 0000000000..bcdd1125f9
--- /dev/null
+++ b/include/configs/warp.h
@@ -0,0 +1,228 @@
+/*
+ * Copyright (C) 2014 O.S. Systems Software LTDA.
+ * Copyright (C) 2014 Kynetics LLC.
+ * Copyright (C) 2014 Revolution Robotics, Inc.
+ *
+ * Author: Otavio Salvador <otavio@ossystems.com.br>
+ *
+ * Configuration settings for the WaRP Board
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/arch/imx-regs.h>
+#include <linux/sizes.h>
+#include "mx6_common.h"
+
+#define CONFIG_MX6
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_SYS_GENERIC_BOARD
+
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define CONFIG_REVISION_TAG
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN		(3 * SZ_1M)
+
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_LATE_INIT
+#define CONFIG_MXC_GPIO
+
+#define CONFIG_MXC_UART
+#define CONFIG_MXC_UART_BASE		UART1_IPS_BASE_ADDR
+
+/* MMC Configs */
+#define CONFIG_FSL_ESDHC
+#define CONFIG_FSL_USDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR	0
+#define CONFIG_SYS_FSL_ESDHC_FORCE_VSELECT
+
+#define CONFIG_MMC
+#define CONFIG_CMD_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_BOUNCE_BUFFER
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_EXT4
+#define CONFIG_CMD_EXT4_WRITE
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_CONS_INDEX		1
+#define CONFIG_BAUDRATE			115200
+
+/* FLASH and environment organization */
+#define CONFIG_SYS_NO_FLASH
+
+/* Command definition */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
+
+#define CONFIG_BOOTDELAY		3
+
+#define CONFIG_LOADADDR			0x82000000
+#define CONFIG_SYS_TEXT_BASE		0x87800000
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_CBSIZE		256
+
+/* Watchdog */
+#define CONFIG_HW_WATCHDOG
+#define CONFIG_IMX_WATCHDOG
+#define CONFIG_WATCHDOG_TIMEOUT_MSECS 30000 /* 30s */
+
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS		16
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+
+#define CONFIG_SYS_MEMTEST_START	0x80000000
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + SZ_256M)
+
+#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
+
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_STACKSIZE		SZ_128K
+
+/* Physical Memory Map */
+#define CONFIG_NR_DRAM_BANKS		1
+#define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
+#define PHYS_SDRAM_SIZE			SZ_512M
+
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
+#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
+#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+#define CONFIG_ENV_OFFSET		(6 * SZ_64K)
+#define CONFIG_ENV_SIZE			SZ_8K
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV		0
+
+/* VDD voltage 1.65 - 1.95 */
+#define CONFIG_SYS_SD_VOLTAGE		0x00000080
+
+#define CONFIG_OF_LIBFDT
+#define CONFIG_CMD_BOOTZ
+
+#ifndef CONFIG_SYS_DCACHE_OFF
+#define CONFIG_CMD_CACHE
+#endif
+
+/* USB Configs */
+#define CONFIG_CMD_USB
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_MX6
+#define CONFIG_USB_STORAGE
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CONFIG_MXC_USB_FLAGS		0
+#define CONFIG_USB_MAX_CONTROLLER_COUNT	1 /* Only OTG2 port enabled */
+#endif
+
+#define CONFIG_CI_UDC
+#define CONFIG_USBD_HS
+#define CONFIG_USB_GADGET_DUALSPEED
+
+#define CONFIG_USB_GADGET
+#define CONFIG_CMD_USB_MASS_STORAGE
+#define CONFIG_USB_GADGET_MASS_STORAGE
+#define CONFIG_USBDOWNLOAD_GADGET
+#define CONFIG_USB_GADGET_VBUS_DRAW	2
+
+#define CONFIG_G_DNL_VENDOR_NUM		0x0525
+#define CONFIG_G_DNL_PRODUCT_NUM	0xa4a5
+#define CONFIG_G_DNL_MANUFACTURER	"FSL"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"script=boot.scr\0" \
+	"image=zImage\0" \
+	"console=ttymxc0\0" \
+	"fdt_high=0xffffffff\0" \
+	"initrd_high=0xffffffff\0" \
+	"fdt_file=imx6sl-warp.dtb\0" \
+	"fdt_addr=0x88000000\0" \
+	"initrd_addr=0x83800000\0" \
+	"boot_fdt=try\0" \
+	"ip_dyn=yes\0" \
+	"mmcdev=0\0" \
+	"mmcpart=1\0" \
+	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
+	"mmcargs=setenv bootargs console=${console},${baudrate} " \
+		"root=${mmcroot}\0" \
+	"loadbootscript=" \
+		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+	"bootscript=echo Running bootscript from mmc ...; " \
+		"source\0" \
+	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
+	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
+	"mmcboot=echo Booting from mmc ...; " \
+		"run mmcargs; " \
+		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+			"if run loadfdt; then " \
+				"bootz ${loadaddr} - ${fdt_addr}; " \
+			"else " \
+				"if test ${boot_fdt} = try; then " \
+					"bootz; " \
+				"else " \
+					"echo WARN: Cannot load the DT; " \
+				"fi; " \
+			"fi; " \
+		"else " \
+			"bootz; " \
+		"fi;\0" \
+	"netargs=setenv bootargs console=${console},${baudrate} " \
+		"root=/dev/nfs " \
+	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
+		"netboot=echo Booting from net ...; " \
+		"run netargs; " \
+		"if test ${ip_dyn} = yes; then " \
+			"setenv get_cmd dhcp; " \
+		"else " \
+			"setenv get_cmd tftp; " \
+		"fi; " \
+		"${get_cmd} ${image}; " \
+		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
+			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
+				"bootz ${loadaddr} - ${fdt_addr}; " \
+			"else " \
+				"if test ${boot_fdt} = try; then " \
+					"bootz; " \
+				"else " \
+					"echo WARN: Cannot load the DT; " \
+				"fi; " \
+			"fi; " \
+		"else " \
+			"bootz; " \
+		"fi;\0"
+
+#define CONFIG_BOOTCOMMAND \
+	   "mmc dev ${mmcdev};" \
+	   "mmc dev ${mmcdev}; if mmc rescan; then " \
+		   "if run loadbootscript; then " \
+			   "run bootscript; " \
+		   "else " \
+			   "if run loadimage; then " \
+				   "run mmcboot; " \
+			   "else run netboot; " \
+			   "fi; " \
+		   "fi; " \
+	   "else run netboot; fi"
+
+#endif				/* __CONFIG_H */
diff --git a/include/fsl_esdhc.h b/include/fsl_esdhc.h
index 313fa1e312..57295b4bc0 100644
--- a/include/fsl_esdhc.h
+++ b/include/fsl_esdhc.h
@@ -155,6 +155,8 @@
 #define ESDHC_HOSTCAPBLT_DMAS	0x00400000
 #define ESDHC_HOSTCAPBLT_HSS	0x00200000
 
+#define ESDHC_VENDORSPEC_VSELECT 0x00000002 /* Use 1.8V */
+
 struct fsl_esdhc_cfg {
 	u32	esdhc_base;
 	u32	sdhc_clk;
diff --git a/include/fsl_sec.h b/include/fsl_sec.h
index b6e6f04a34..dbfae68ef4 100644
--- a/include/fsl_sec.h
+++ b/include/fsl_sec.h
@@ -135,7 +135,7 @@ typedef struct ccsr_sec {
 #define CONFIG_JRSTARTR_JR0		0x00000001
 
 struct jr_regs {
-#ifdef CONFIG_SYS_FSL_SEC_LE
+#if defined(CONFIG_SYS_FSL_SEC_LE) && !defined(CONFIG_MX6)
 	u32 irba_l;
 	u32 irba_h;
 #else
@@ -148,7 +148,7 @@ struct jr_regs {
 	u32 irsa;
 	u32 rsvd3;
 	u32 irja;
-#ifdef CONFIG_SYS_FSL_SEC_LE
+#if defined(CONFIG_SYS_FSL_SEC_LE) && !defined(CONFIG_MX6)
 	u32 orba_l;
 	u32 orba_h;
 #else
@@ -180,7 +180,7 @@ struct jr_regs {
  * related information
  */
 struct sg_entry {
-#ifdef CONFIG_SYS_FSL_SEC_LE
+#ifdef defined(CONFIG_SYS_FSL_SEC_LE) && !defined(CONFIG_MX6)
 	uint32_t addr_lo;	/* Memory Address - lo */
 	uint16_t addr_hi;	/* Memory Address of start of buffer - hi */
 	uint16_t reserved_zero;
@@ -201,7 +201,79 @@ struct sg_entry {
 #define SG_ENTRY_OFFSET_SHIFT	0
 };
 
+#ifdef CONFIG_MX6
+/* CAAM Job Ring 0 Registers */
+/* Secure Memory Partition Owner register */
+#define SMCSJR_PO		(3 << 6)
+/* JR Allocation Error */
+#define SMCSJR_AERR		(3 << 12)
+/* Secure memory partition 0 page 0 owner register */
+#define CAAM_SMPO_0		CONFIG_SYS_FSL_SEC_ADDR + 0x1FBC
+/* Secure memory command register */
+#define CAAM_SMCJR0		CONFIG_SYS_FSL_SEC_ADDR + 0x10f4
+/* Secure memory command status register */
+#define CAAM_SMCSJR0		CONFIG_SYS_FSL_SEC_ADDR + 0x10fc
+/* Secure memory access permissions register */
+#define CAAM_SMAPJR0(y)	(CONFIG_SYS_FSL_SEC_ADDR + 0x1104 + y*16)
+/* Secure memory access group 2 register */
+#define CAAM_SMAG2JR0(y)	(CONFIG_SYS_FSL_SEC_ADDR + 0x1108 + y*16)
+/* Secure memory access group 1 register */
+#define CAAM_SMAG1JR0(y)	(CONFIG_SYS_FSL_SEC_ADDR + 0x110C + y*16)
+
+/* Commands and macros for secure memory */
+#define CMD_PAGE_ALLOC		0x1
+#define CMD_PAGE_DEALLOC	0x2
+#define CMD_PART_DEALLOC	0x3
+#define CMD_INQUIRY		0x5
+#define CMD_COMPLETE		(3 << 14)
+#define PAGE_AVAILABLE		0
+#define PAGE_OWNED		(3 << 6)
+#define PAGE(x)			(x << 16)
+#define PARTITION(x)		(x << 8)
+#define PARTITION_OWNER(x)	(0x3 << (x*2))
+
+/* Address of secure 4kbyte pages */
+#define SEC_MEM_PAGE0		CAAM_ARB_BASE_ADDR
+#define SEC_MEM_PAGE1		(CAAM_ARB_BASE_ADDR + 0x1000)
+#define SEC_MEM_PAGE2		(CAAM_ARB_BASE_ADDR + 0x2000)
+#define SEC_MEM_PAGE3		(CAAM_ARB_BASE_ADDR + 0x3000)
+
+#define JR_MID			2               /* Matches ROM configuration */
+#define KS_G1			(1 << JR_MID)   /* CAAM only */
+#define PERM			0x0000B008      /* Clear on release, lock SMAP
+						 * lock SMAG group 1 Blob */
+
+#define BLOB_SIZE(x)       (x + 32 + 16) /* Blob buffer size */
+
+/* HAB WRAPPED KEY header */
+#define WRP_HDR_SIZE		0x08
+#define HDR_TAG			0x81
+#define HDR_PAR			0x41
+/* HAB WRAPPED KEY Data */
+#define HAB_MOD			0x66
+#define HAB_ALG			0x55
+#define HAB_FLG			0x00
+
+/* Partition and Page IDs */
+#define PARTITION_1	1
+#define PAGE_1			1
+
+#define ERROR_IN_PAGE_ALLOC	1
+#define ECONSTRJDESC   -1
+
+#endif
+
 int sec_init(void);
+
+/* blob_dek:
+ * Encapsulates the src in a secure blob and stores it dst
+ * @src: reference to the plaintext
+ * @dst: reference to the output adrress
+ * @len: size in bytes of src
+ * @return: 0 on success, error otherwise
+ */
+int blob_dek(const u8 *src, u8 *dst, u8 len);
+
 #endif
 
 #endif /* __FSL_SEC_H */
diff --git a/include/mc34704.h b/include/mc34704.h
index 53716e0398..482d51ab2f 100644
--- a/include/mc34704.h
+++ b/include/mc34704.h
@@ -40,6 +40,7 @@ enum {
 /* GENERAL2 register fields */
 #define ONOFFE		(1 << 0)
 #define ONOFFD		(1 << 1)
+#define ONOFFA		(1 << 3)
 #define ALLOFF		(1 << 4)
 
 #endif /* __MC34704_H__ */
diff --git a/include/mmc.h b/include/mmc.h
index 7d6feca5b4..2ad0f191c3 100644
--- a/include/mmc.h
+++ b/include/mmc.h
@@ -106,6 +106,7 @@
 #define SD_CMD_SEND_RELATIVE_ADDR	3
 #define SD_CMD_SWITCH_FUNC		6
 #define SD_CMD_SEND_IF_COND		8
+#define SD_CMD_SWITCH_UHS18V		11
 
 #define SD_CMD_APP_SET_BUS_WIDTH	6
 #define SD_CMD_ERASE_WR_BLK_START	32
diff --git a/include/power/pfuze100_pmic.h b/include/power/pfuze100_pmic.h
index d304658b9a..07199b4f89 100644
--- a/include/power/pfuze100_pmic.h
+++ b/include/power/pfuze100_pmic.h
@@ -232,5 +232,7 @@ enum {
 #define APS_PFM		0xc
 #define PWM_PFM		0xd
 
+#define SWITCH_SIZE	0x7
+
 int power_pfuze100_init(unsigned char bus);
 #endif