1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
|
/*
* cx231xx IR glue driver
*
* Copyright (C) 2010 Mauro Carvalho Chehab
*
* Polaris (cx231xx) has its support for IR's with a design close to MCE.
* however, a few designs are using an external I2C chip for IR, instead
* of using the one provided by the chip.
* This driver provides support for those extra devices
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation version 2.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*/
#include "cx231xx.h"
#include <linux/slab.h>
#include <linux/bitrev.h>
#define MODULE_NAME "cx231xx-input"
static int get_key_isdbt(struct IR_i2c *ir, enum rc_type *protocol,
u32 *pscancode, u8 *toggle)
{
int rc;
u8 cmd, scancode;
dev_dbg(&ir->rc->input_dev->dev, "%s\n", __func__);
/* poll IR chip */
rc = i2c_master_recv(ir->c, &cmd, 1);
if (rc < 0)
return rc;
if (rc != 1)
return -EIO;
/* it seems that 0xFE indicates that a button is still hold
down, while 0xff indicates that no button is hold
down. 0xfe sequences are sometimes interrupted by 0xFF */
if (cmd == 0xff)
return 0;
scancode = bitrev8(cmd);
dev_dbg(&ir->rc->input_dev->dev, "cmd %02x, scan = %02x\n",
cmd, scancode);
*protocol = RC_TYPE_OTHER;
*pscancode = scancode;
*toggle = 0;
return 1;
}
int cx231xx_ir_init(struct cx231xx *dev)
{
struct i2c_board_info info;
u8 ir_i2c_bus;
dev_dbg(dev->dev, "%s\n", __func__);
/* Only initialize if a rc keycode map is defined */
if (!cx231xx_boards[dev->model].rc_map_name)
return -ENODEV;
request_module("ir-kbd-i2c");
memset(&info, 0, sizeof(struct i2c_board_info));
memset(&dev->init_data, 0, sizeof(dev->init_data));
dev->init_data.rc_dev = rc_allocate_device();
if (!dev->init_data.rc_dev)
return -ENOMEM;
dev->init_data.name = cx231xx_boards[dev->model].name;
strlcpy(info.type, "ir_video", I2C_NAME_SIZE);
info.platform_data = &dev->init_data;
/*
* Board-dependent values
*
* For now, there's just one type of hardware design using
* an i2c device.
*/
dev->init_data.get_key = get_key_isdbt;
dev->init_data.ir_codes = cx231xx_boards[dev->model].rc_map_name;
/* The i2c micro-controller only outputs the cmd part of NEC protocol */
dev->init_data.rc_dev->scancode_mask = 0xff;
dev->init_data.rc_dev->driver_name = "cx231xx";
dev->init_data.type = RC_BIT_NEC;
info.addr = 0x30;
/* Load and bind ir-kbd-i2c */
ir_i2c_bus = cx231xx_boards[dev->model].ir_i2c_master;
dev_dbg(dev->dev, "Trying to bind ir at bus %d, addr 0x%02x\n",
ir_i2c_bus, info.addr);
dev->ir_i2c_client = i2c_new_device(
cx231xx_get_i2c_adap(dev, ir_i2c_bus), &info);
return 0;
}
void cx231xx_ir_exit(struct cx231xx *dev)
{
if (dev->ir_i2c_client)
i2c_unregister_device(dev->ir_i2c_client);
dev->ir_i2c_client = NULL;
}
|
