1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
|
/*
* opp2430_data.c - old-style "OPP" table for OMAP2430
*
* Copyright (C) 2005-2009 Texas Instruments, Inc.
* Copyright (C) 2004-2009 Nokia Corporation
*
* Richard Woodruff <r-woodruff2@ti.com>
*
* The OMAP2 processor can be run at several discrete 'PRCM configurations'.
* These configurations are characterized by voltage and speed for clocks.
* The device is only validated for certain combinations. One way to express
* these combinations is via the 'ratios' which the clocks operate with
* respect to each other. These ratio sets are for a given voltage/DPLL
* setting. All configurations can be described by a DPLL setting and a ratio.
*
* 2430 differs from 2420 in that there are no more phase synchronizers used.
* They both have a slightly different clock domain setup. 2420(iva1,dsp) vs
* 2430 (iva2.1, NOdsp, mdm)
*
* XXX Missing voltage data.
* XXX Missing 19.2MHz sys_clk rate sets.
*
* THe format described in this file is deprecated. Once a reasonable
* OPP API exists, the data in this file should be converted to use it.
*
* This is technically part of the OMAP2xxx clock code.
*/
#include <linux/kernel.h>
#include "opp2xxx.h"
#include "sdrc.h"
#include "clock.h"
/*
* Key dividers which make up a PRCM set. Ratios for a PRCM are mandated.
* xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,
* CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL,
* CM_CLKSEL2_PLL, CM_CLKSEL_MDM
*
* Filling in table based on 2430-SDPs variants available. There are
* quite a few more rate combinations which could be defined.
*
* When multiple values are defined the start up will try and choose
* the fastest one. If a 'fast' value is defined, then automatically,
* the /2 one should be included as it can be used. Generally having
* more than one fast set does not make sense, as static timings need
* to be changed to change the set. The exception is the bypass
* setting which is available for low power bypass.
*
* Note: This table needs to be sorted, fastest to slowest.
*/
const struct prcm_config omap2430_rate_table[] = {
/* PRCM #4 - ratio2 (ES2.1) - FAST */
{S13M, S798M, S399M, R2_CM_CLKSEL_MPU_VAL, /* 399MHz ARM */
R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL,
R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL,
MX_CLKSEL2_PLL_2x_VAL, R2_CM_CLKSEL_MDM_VAL,
SDRC_RFR_CTRL_133MHz,
RATE_IN_243X},
/* PRCM #2 - ratio1 (ES2) - FAST */
{S13M, S658M, S329M, R1_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */
R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL,
MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
SDRC_RFR_CTRL_165MHz,
RATE_IN_243X},
/* PRCM #5a - ratio1 - FAST */
{S13M, S532M, S266M, R1_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */
R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL,
MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
SDRC_RFR_CTRL_133MHz,
RATE_IN_243X},
/* PRCM #5b - ratio1 - FAST */
{S13M, S400M, S200M, R1_CM_CLKSEL_MPU_VAL, /* 200MHz ARM */
R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL,
MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
SDRC_RFR_CTRL_100MHz,
RATE_IN_243X},
/* PRCM #4 - ratio1 (ES2.1) - SLOW */
{S13M, S399M, S199M, R2_CM_CLKSEL_MPU_VAL, /* 200MHz ARM */
R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL,
R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL,
MX_CLKSEL2_PLL_1x_VAL, R2_CM_CLKSEL_MDM_VAL,
SDRC_RFR_CTRL_133MHz,
RATE_IN_243X},
/* PRCM #2 - ratio1 (ES2) - SLOW */
{S13M, S329M, S164M, R1_CM_CLKSEL_MPU_VAL, /* 165MHz ARM */
R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL,
MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
SDRC_RFR_CTRL_165MHz,
RATE_IN_243X},
/* PRCM #5a - ratio1 - SLOW */
{S13M, S266M, S133M, R1_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */
R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL,
MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
SDRC_RFR_CTRL_133MHz,
RATE_IN_243X},
/* PRCM #5b - ratio1 - SLOW*/
{S13M, S200M, S100M, R1_CM_CLKSEL_MPU_VAL, /* 100MHz ARM */
R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL,
MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
SDRC_RFR_CTRL_100MHz,
RATE_IN_243X},
/* PRCM-boot/bypass */
{S13M, S13M, S13M, RB_CM_CLKSEL_MPU_VAL, /* 13Mhz */
RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_13_VAL,
MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
SDRC_RFR_CTRL_BYPASS,
RATE_IN_243X},
/* PRCM-boot/bypass */
{S12M, S12M, S12M, RB_CM_CLKSEL_MPU_VAL, /* 12Mhz */
RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_12_VAL,
MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
SDRC_RFR_CTRL_BYPASS,
RATE_IN_243X},
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
};
|
