1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
|
/*
* Copyright 2012 Markus Pargmann, Pengutronix
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#include "imx27-phytec-phycard-s-som.dts"
/ {
model = "Phytec pca100 rapid development kit";
compatible = "phytec,imx27-pca100-rdk", "phytec,imx27-pca100", "fsl,imx27";
display: display {
model = "Primeview-PD050VL1";
native-mode = <&timing0>;
bits-per-pixel = <16>; /* non-standard but required */
fsl,pcr = <0xf0c88080>; /* non-standard but required */
display-timings {
timing0: 640x480 {
hactive = <640>;
vactive = <480>;
hback-porch = <112>;
hfront-porch = <36>;
hsync-len = <32>;
vback-porch = <33>;
vfront-porch = <33>;
vsync-len = <2>;
clock-frequency = <25000000>;
};
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_3v3: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
};
};
&fb {
display = <&display>;
status = "okay";
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
rtc@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
};
adc@64 {
compatible = "maxim,max1037";
vcc-supply = <®_3v3>;
reg = <0x64>;
};
};
&iomuxc {
imx27-phycard-s-rdk {
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
>;
};
pinctrl_owire1: owire1grp {
fsl,pins = <
MX27_PAD_RTCK__OWIRE 0x0
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX27_PAD_UART1_TXD__UART1_TXD 0x0
MX27_PAD_UART1_RXD__UART1_RXD 0x0
MX27_PAD_UART1_CTS__UART1_CTS 0x0
MX27_PAD_UART1_RTS__UART1_RTS 0x0
>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <
MX27_PAD_UART2_TXD__UART2_TXD 0x0
MX27_PAD_UART2_RXD__UART2_RXD 0x0
MX27_PAD_UART2_CTS__UART2_CTS 0x0
MX27_PAD_UART2_RTS__UART2_RTS 0x0
>;
};
pinctrl_uart3: uart3grp {
fsl,pins = <
MX27_PAD_UART3_TXD__UART3_TXD 0x0
MX27_PAD_UART3_RXD__UART3_RXD 0x0
MX27_PAD_UART3_CTS__UART3_CTS 0x0
MX27_PAD_UART3_RTS__UART3_RTS 0x0
>;
};
};
};
&owire {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_owire1>;
status = "okay";
};
&sdhci2 {
cd-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&uart1 {
fsl,uart-has-rtscts;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
&uart2 {
fsl,uart-has-rtscts;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
status = "okay";
};
&uart3 {
fsl,uart-has-rtscts;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
status = "okay";
};
|
