summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* Merge branch 'pci/misc' into nextBjorn Helgaas2013-02-151-1/+1
|\ | | | | | | | | * pci/misc: PCI: Fix PCI Express Capability accessors for PCI_EXP_FLAGS
| * PCI: Fix PCI Express Capability accessors for PCI_EXP_FLAGSAlex Williamson2013-02-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | PCI_EXP_FLAGS_TYPE is a mask, not an offset. Fix it. Previously, pcie_capability_read_word(..., PCI_EXP_FLAGS, ...) would fail. [bhelgaas: tweak changelog] Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v3.7+
* | Merge branch 'pci/jiang-pci_slot-kconfig' into nextBjorn Helgaas2013-02-154-16/+8
|\ \ | | | | | | | | | | | | * pci/jiang-pci_slot-kconfig: ACPI / PCI: Make pci_slot built-in only, not a module
| * | ACPI / PCI: Make pci_slot built-in only, not a moduleJiang Liu2013-02-154-16/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | As discussed in thread at https://patchwork.kernel.org/patch/1946851/, there's no value in supporting CONFIG_ACPI_PCI_SLOT=m any more. So change Kconfig and code to only support building pci_slot as built-in driver. Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* | | Merge branch 'pci/konstantin-runtime-pm' into nextBjorn Helgaas2013-02-122-3/+10
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | * pci/konstantin-runtime-pm: PCI/PM: Clear state_saved during suspend PCI: Use atomic_inc_return() rather than atomic_add_return() PCI: Catch attempts to disable already-disabled devices PCI: Disable Bus Master unconditionally in pci_device_shutdown()
| * | | PCI/PM: Clear state_saved during suspendRafael J. Wysocki2013-02-111-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch clears pci_dev->state_saved at the beginning of suspending. PCI config state may be saved long before that. Some drivers call pci_save_state() from the ->probe() callback to get snapshot of sane configuration space to use in the ->slot_reset() callback. Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> # add comment Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | | PCI: Use atomic_inc_return() rather than atomic_add_return()Bjorn Helgaas2013-02-111-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | No functional change; just use atomic_inc_return() rather than the general-purpose atomic_add_return(). Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | | PCI: Catch attempts to disable already-disabled devicesKonstantin Khlebnikov2013-02-111-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Warn when disabling a device that has already been disabled. [bhelgaas: message wording] Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
| * | | PCI: Disable Bus Master unconditionally in pci_device_shutdown()Konstantin Khlebnikov2013-02-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit b566a22c23 ("PCI: disable Bus Master on PCI device shutdown") used pci_disable_device(), but that doesn't disable Bus Mastering unconditionally; we allow nested enable/disable calls, and only the last disable call actually does anything. This uses pci_clear_master() to unconditionally clear the Bus Master bit. Matthew Garrett and Alan Cox said (see LKML link below) that clearing Bus Master for all PCI devices may lead to unpredictable consequences: some devices ignores this bit and continue DMA, some of them hang after that or crash the whole system. But we're already trying to clear Bus Master in general because of b566a22c23; this merely deals with the cases where drivers haven't shut down the device correctly. [bhelgaas: changelog] Link: https://lkml.org/lkml/2012/6/6/278 Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* | | | Merge branch 'pci/misc' into nextBjorn Helgaas2013-02-026-20/+37
|\ \ \ \ | | |_|/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * pci/misc: PCI: pciehp: Drop suspend/resume ENTRY messages PCI: Document MPS parameters pci=pcie_bus_safe, pci=pcie_bus_perf, etc PCI: Document hpiosize= and hpmemsize= resource reservation parameters PCI: Use PCI Express Capability accessor PCI: Introduce accessor to retrieve PCIe Capabilities Register PCI: Kill pci_is_reassigndev()
| * | | PCI: pciehp: Drop suspend/resume ENTRY messagesPaul Bolle2013-02-011-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In each suspend and resume cycle my laptop prints these messages at KERN_INFO level: pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY and pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY Drop these messages, that were probably used to debug the suspend and resume code, but now serve no purpose. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | | PCI: Document MPS parameters pci=pcie_bus_safe, pci=pcie_bus_perf, etcYijing Wang2013-01-311-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Document PCIe bus MPS parameters pcie_bus_tune_off, pcie_bus_safe, pcie_bus_peer2peer, pcie_bus_perf. These parameters were introduced by Jon Mason <jdmason@kudzu.us> at commit 5f39e6705 and commit b03e7495a8. [bhelgaas: mention hot-add for pcie_bus_peer2peer] Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | | PCI: Document hpiosize= and hpmemsize= resource reservation parametersYijing Wang2013-01-311-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Document PCI hotplug resource reservation parameters hpiosize and hpmemsize. These parameters override default hotplug I/O size (256 bytes) and default mem size (2M). Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | | PCI: Use PCI Express Capability accessorMyron Stowe2013-01-303-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Use PCI Express Capability access functions to simplify device Capabilities Register usages. Signed-off-by: Myron Stowe <myron.stowe@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | | PCI: Introduce accessor to retrieve PCIe Capabilities RegisterMyron Stowe2013-01-301-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Provide an accessor to retrieve the PCI Express device's Capabilities Register. Signed-off-by: Myron Stowe <myron.stowe@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | | PCI: Kill pci_is_reassigndev()Yinghai Lu2013-01-241-14/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | pci_reassigndev_resource_alignment() is the only user of pci_is_reassigndev(). If we just use pci_specified_resource_alignment() directly, we only need to call it once instead of twice, and we can get rid of pci_is_reassigndev() altogether. No functional change. [bhelgaas: changelog] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* | | | Merge branch 'pci/joe-aspm' into nextBjorn Helgaas2013-02-021-4/+4
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | * pci/joe-aspm: PCI/ASPM: Don't touch ASPM if forcibly disabled PCI/ASPM: Deallocate upstream link state even if device is not PCIe
| * | | | PCI/ASPM: Don't touch ASPM if forcibly disabledJoe Lawrence2013-02-011-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Don't allocate and track PCIe ASPM state when "pcie_aspm=off" is specified on the kernel command line. Based-on-patch-from: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by: Joe Lawrence <joe.lawrence@stratus.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: David Bulkow <david.bulkow@stratus.com> Acked-by: Myron Stowe <myron.stowe@redhat.com>
| * | | | PCI/ASPM: Deallocate upstream link state even if device is not PCIeMyron Stowe2013-02-011-4/+1
| | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On PCI bus hotplug removal, pcie_aspm_exit_link_state() can potentially skip parent devices that have link_state allocated. Instead of exiting early if a given device is not PCIe, check whether or not the device's parent has link_state allocated. This enables pcie_aspm_exit_link_state() to properly clean up parent link_state when the last function in a slot might not be PCIe. Reported-by: Joe Lawrence <joe.lawrence@stratus.com> Tested-by: Joe Lawrence <joe.lawrence@stratus.com> Signed-off-by: Myron Stowe <myron.stowe@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* | | | Merge branch 'pci/yinghai-root-bus-hotplug' into nextBjorn Helgaas2013-02-023-127/+17
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * pci/yinghai-root-bus-hotplug: PCI: acpiphp: Remove dead code for PCI host bridge hotplug PCI: acpiphp: Create companion ACPI devices before creating PCI devices PCI: Remove unused "rc" in virtfn_add_bus()
| * | | | PCI: acpiphp: Remove dead code for PCI host bridge hotplugJiang Liu2013-02-022-123/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 668192b678201d2fff27c "PCI: acpiphp: Move host bridge hotplug to pci_root.c" has moved PCI host bridge hotplug logic from acpiphp to pci_root, but there is still PCI host bridge hotplug related dead code left in acpiphp. So remove those dead code. Now companion ACPI devices are always created before corresponding PCI devices. And the ACPI event handle_hotplug_event_bridge() will be installed only if it has associated PCI device. So remove dead code to handle bridge hot-adding in function handle_hotplug_event_bridge(). Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | | | PCI: acpiphp: Create companion ACPI devices before creating PCI devicesJiang Liu2013-02-011-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With commit 4f535093cf8f6da8c "PCI: Put pci_dev in device tree as early as possible", companion ACPI devices should be created before creating corresponding PCI devices, otherwise it will break the ACPI PCI binding logic. Without this patch, the /sys/bus/pci/devices/.../firmware_node symlink is missing after hot-removing and hot-adding a device with acpiphp. Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | | | PCI: Remove unused "rc" in virtfn_add_bus()Yijing Wang2013-02-011-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Delete unused variable "rc" to fix build warning in drivers/pci/iov.c Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* | | | | Merge branch 'pci/yinghai-root-bus-hotplug' into nextBjorn Helgaas2013-01-2618-219/+274
|\ \ \ \ \ | |/ / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * pci/yinghai-root-bus-hotplug: PCI: Put pci_dev in device tree as early as possible PCI: Skip attaching driver in device_add() PCI: acpiphp: Keep driver loaded even if no slots found PCI/ACPI: Print info if host bridge notify handler installation fails PCI: acpiphp: Move host bridge hotplug to pci_root.c PCI/ACPI: acpiphp: Rename alloc_acpiphp_hp_work() to alloc_acpi_hp_work() PCI: Make device create/destroy logic symmetric PCI: Fix reference count leak in pci_dev_present() PCI: Set pci_dev dev_node early so IOAPIC irq_descs are allocated locally PCI: Add root bus children dev's res to fail list PCI: acpiphp: Add is_hotplug_bridge detection Conflicts: drivers/pci/pci.h
| * | | | PCI: Put pci_dev in device tree as early as possibleYinghai Lu2013-01-254-82/+41
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We want to put pci_dev structs in the device tree as soon as possible so for_each_pci_dev() iteration will not miss them, but driver attachment needs to be delayed until after pci_assign_unassigned_resources() to make sure all devices have resources assigned first. This patch moves device registering from pci_bus_add_devices() to pci_device_add(), which happens earlier, leaving driver attachment in pci_bus_add_devices(). It also removes unattached child bus handling in pci_bus_add_devices(). That's not needed because child bus via pci_add_new_bus() is already in parent bus children list. [bhelgaas: changelog] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
| * | | | PCI: Skip attaching driver in device_add()Yinghai Lu2013-01-253-1/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We want to add PCI devices to the device tree as early as possible but delay attaching drivers. device_add() adds a device to the device hierarchy and (via device_attach()) attaches a matching driver and calls its .probe() method. We want to separate adding the device to the hierarchy from attaching the driver. This patch does that by adding "match_driver" in struct pci_dev. When false, we return failure from pci_bus_match(), which makes device_attach() believe there's no matching driver. Later, we set "match_driver = true" and call device_attach() again, which now attaches the driver and calls its .probe() method. [bhelgaas: changelog, explicitly init dev->match_driver, fold device_attach() call into pci_bus_add_device()] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
| * | | | PCI: acpiphp: Keep driver loaded even if no slots foundYinghai Lu2013-01-253-44/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Could have root bus hot-added later and there may be slots that need acpiphp. The result returned by acpiphp_get_num_slots() is meaningless, because the bridge the slots are under may be added after this function has been called, so drop acpiphp_get_num_slots() and the code using it. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
| * | | | PCI/ACPI: Print info if host bridge notify handler installation failsTang Chen2013-01-251-3/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | acpi_install_notify_handler() could fail. So check the exit status and give a better debug info. Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
| * | | | PCI: acpiphp: Move host bridge hotplug to pci_root.cYinghai Lu2013-01-254-44/+143
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The acpiphp driver is confusing because it contains partial support for PCI host bridge hotplug as well as support for hotplug of PCI devices. This patch moves the host bridge hot-add support to pci_root.c and adds hot-remove support in pci_root.c. How to test it: if sci_emu patch is applied, find out root bus number to ACPI root name mapping from dmesg or /sys. To remove root bus: echo "\_SB.PCIB 3" > /sys/kernel/debug/acpi/sci_notify To add back root bus: echo "\_SB.PCIB 1" > /sys/kernel/debug/acpi/sci_notify Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
| * | | | PCI/ACPI: acpiphp: Rename alloc_acpiphp_hp_work() to alloc_acpi_hp_work()Yinghai Lu2013-01-254-40/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Will need to use it for PCI root bridge hotplug support, so rename *acpiphp* to *acpi* and move to osc.c. Also make kacpi_hotplug_wq static after that. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> CC: Len Brown <lenb@kernel.org> CC: linux-acpi@vger.kernel.org
| * | | | PCI: Make device create/destroy logic symmetricJiang Liu2013-01-252-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to device model documentation, the way to create/destroy PCI devices should be symmetric. The rule is to either use 1) device_register()/device_unregister() or 2) device_initialize()/device_add()/device_del()/put_device(). So change PCI core logic to follow the rule and get rid of the redundant pci_dev_get()/pci_dev_put() pair. Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
| * | | | PCI: Fix reference count leak in pci_dev_present()Jiang Liu2013-01-251-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Function pci_get_dev_by_id() takes a reference on the pci_dev returned, so pci_dev_present() should release the corresponding reference. Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
| * | | | PCI: Set pci_dev dev_node early so IOAPIC irq_descs are allocated locallyYinghai Lu2013-01-251-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Otherwise irq_desc for PCI bridge with hot-added IOAPIC may not be allocated on the local node. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
| * | | | PCI: Add root bus children dev's res to fail listYinghai Lu2013-01-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We can stop trying according to try_number now and do not need to use root_bus checking as stop sign. In extreme case we could need to reallocate resource for device just under root bus. For PCI root bus hot-add, we need to retry to assign resources to PCI devices just under pci root bus. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
| * | | | PCI: acpiphp: Add is_hotplug_bridge detectionYinghai Lu2013-01-251-1/+26
| | |_|/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When system support hotplug bridge with children hotplug slots, we need to make sure that parent bridge get preallocated resource so later when device is plugged into children slot, those children devices will get resource allocated. We do not meet this problem, because for PCIe hotplug card, when acpiphp is used, pci_scan_bridge will set that for us when detect hotplug bit in slot cap. Reported-and-tested-by: Jason Baron <jbaron@redhat.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Jason Baron <jbaron@redhat.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* | | | Merge branch 'pci/acpi-scan2' into nextBjorn Helgaas2013-01-268-126/+79
|\ \ \ \ | |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * pci/acpi-scan2: ACPI / scan: Drop acpi_bus_add() and use acpi_bus_scan() instead ACPI: update ej_event interface to take acpi_device ACPI / scan: Add second pass to acpi_bus_trim() ACPI / scan: Change the implementation of acpi_bus_trim() ACPI / scan: Drop the second argument of acpi_bus_trim() ACPI / scan: Drop the second argument of acpi_device_unregister() ACPI: Remove the ops field from struct acpi_device ACPI: remove unused acpi_op_bind and acpi_op_unbind ACPI / scan: Fix check of device_attach() return value.
| * | | Merge branch 'acpi-scan' of ↵Bjorn Helgaas2013-01-258-126/+79
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm into pci/acpi-scan2 * 'acpi-scan' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / scan: Drop acpi_bus_add() and use acpi_bus_scan() instead ACPI: update ej_event interface to take acpi_device ACPI / scan: Add second pass to acpi_bus_trim() ACPI / scan: Change the implementation of acpi_bus_trim() ACPI / scan: Drop the second argument of acpi_bus_trim() ACPI / scan: Drop the second argument of acpi_device_unregister() ACPI: Remove the ops field from struct acpi_device ACPI: remove unused acpi_op_bind and acpi_op_unbind ACPI / scan: Fix check of device_attach() return value.
| | * | | ACPI / scan: Drop acpi_bus_add() and use acpi_bus_scan() insteadRafael J. Wysocki2013-01-198-41/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The only difference between acpi_bus_scan() and acpi_bus_add() is the invocation of acpi_update_all_gpes() in the latter which in fact is unnecessary, because acpi_update_all_gpes() has already been called by acpi_scan_init() and the way it is implemented guarantees the next invocations of it to do nothing. For this reason, drop acpi_bus_add() and make all its callers use acpi_bus_scan() directly instead of it. Additionally, rearrange the code in acpi_scan_init() slightly to improve the visibility of the acpi_update_all_gpes() call in there. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Yinghai Lu <yinghai@kernel.org>
| | * | | ACPI: update ej_event interface to take acpi_deviceYinghai Lu2013-01-154-13/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Should use acpi_device pointer directly instead of use handle and get the device pointer again later. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
| | * | | ACPI / scan: Add second pass to acpi_bus_trim()Rafael J. Wysocki2013-01-151-16/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make acpi_bus_trim() work in analogy with acpi_bus_scan() and carry out two passes such that ACPI drivers will be detached from device nodes being removed in the first pass and the device nodes themselves will be removed in the second pass. For this purpose split the driver unregistration out of acpi_bus_remove() into a new routine, acpi_bus_device_detach(), that will be executed by acpi_bus_trim() in the additional first pass as a post-order callback. This is necessary, because some ACPI drivers' .remove() routines unregister struct device objects associated with the ACPI device nodes being removed and that needs to happen while the ACPI device nodes are still around (for example, in case they need to be used for power management or similar things at that time). Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Toshi Kani <toshi.kani@hp.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
| | * | | ACPI / scan: Change the implementation of acpi_bus_trim()Rafael J. Wysocki2013-01-151-49/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current acpi_bus_trim() implementation is not really straightforward and may be simplified significantly by using acpi_walk_namespace() with acpi_bus_remove() as a post-order callback. Observe that acpi_bus_remove(), as called by acpi_bus_trim(), cannot actually fail, because its first argument is guaranteed not to be NULL thanks to the acpi_bus_get_device() check in acpi_bus_trim(), so simply move the acpi_bus_get_device() check to acpi_bus_remove() and use acpi_walk_namespace() to execute it for every device under start->handle as a post-order callback. The, run it directly for start->handle itself. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Toshi Kani <toshi.kani@hp.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
| | * | | ACPI / scan: Drop the second argument of acpi_bus_trim()Rafael J. Wysocki2013-01-155-17/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All callers of acpi_bus_trim() pass 1 (true) as the second argument of it, so remove that argument entirely and change acpi_bus_trim() to always behave as though it were 1. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Toshi Kani <toshi.kani@hp.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
| | * | | ACPI / scan: Drop the second argument of acpi_device_unregister()Rafael J. Wysocki2013-01-151-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Drop the second argument of acpi_device_unregister(), type, which is not used by that function. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Toshi Kani <toshi.kani@hp.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
| | * | | ACPI: Remove the ops field from struct acpi_deviceRafael J. Wysocki2013-01-151-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ops field in struct acpi_device is not used anywhere, so remove it. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Toshi Kani <toshi.kani@hp.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
| | * | | ACPI: remove unused acpi_op_bind and acpi_op_unbindJiang Liu2013-01-141-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With commit f2a33cde55a03 "ACPI: Drop ACPI device .bind() and .unbind() callbacks", acpi_op_bind and acpi_op_unbind are not used any more. So remove them. Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
| | * | | ACPI / scan: Fix check of device_attach() return value.Mika Westerberg2013-01-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since device_attach() returns 1 on success (a driver has been bound to the device), the check against its return value in acpi_bus_device_attach() should modified to take that into accout. Make it so. [rjw: Subject and changelog.] Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* | | | | Merge branch 'pci/yijing-ari' into nextBjorn Helgaas2013-01-267-136/+109
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * pci/yijing-ari: PCI: shpchp: Iterate over all devices in slot, not functions 0-7 PCI: sgihp: Iterate over all devices in slot, not functions 0-7 PCI: cpcihp: Iterate over all devices in slot, not functions 0-7 PCI: pciehp: Iterate over all devices in slot, not functions 0-7 PCI: Consolidate "next-function" functions PCI: Rename pci_enable_ari() to pci_configure_ari() PCI: Enable ARI if dev and upstream bridge support it; disable otherwise
| * | | | | PCI: shpchp: Iterate over all devices in slot, not functions 0-7Yijing Wang2013-01-251-20/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Iterate through devices in a slot by using the upstream bridge's "bus->devices" list instead of assuming they are functions 0-7. It's possible there are several slots on the same pci_bus, so restrict it to only devices matching this slot's device number. ARI (which allows functions 0-255) is a PCIe-only feature, and this is a PCI hotplug driver, so we shouldn't find anything other than functions 0-7, but it's better to iterate the same way as other hotplug drivers. [bhelgaas: changelog, check PCI_SLOT, fix shpchp_unconfigure_device()] Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | | | | PCI: sgihp: Iterate over all devices in slot, not functions 0-7Yijing Wang2013-01-251-34/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Iterate through devices in a slot by using the upstream bridge's "bus->devices" list instead of assuming they are functions 0-7. It's possible there are several slots on the same pci_bus, so restrict it to only devices matching this slot's device number. ARI (which allows functions 0-255) is a PCIe-only feature, and this is a PCI hotplug driver, so we shouldn't find anything other than functions 0-7, but it's better to iterate the same way as other hotplug drivers. [bhelgaas: changelog, check PCI_SLOT, fix disable_slot()] Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
| * | | | | PCI: cpcihp: Iterate over all devices in slot, not functions 0-7Yijing Wang2013-01-251-18/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Iterate through devices in a slot by using the upstream bridge's "bus->devices" list instead of assuming they are functions 0-7. It's possible there are several slots on the same pci_bus, so restrict it to only devices matching this slot's device number. ARI (which allows functions 0-255) is a PCIe-only feature, and this is a PCI hotplug driver, so we shouldn't find anything other than functions 0-7, but it's better to iterate the same way as other hotplug drivers. [bhelgaas: changelog, check PCI_SLOT, fix cpci_unconfigure_slot()] Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
OpenPOWER on IntegriCloud