summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* staging: comedi: daqboard2000: add back subsystem_device checkH Hartley Sweeten2012-08-071-1/+2
| | | | | | | | | | | As mentioned by Ian Abbott, this driver originally checked the pci_dev subsystem_device in order to make sure that the pci_dev was compatible with this driver. The cleanup of the "find pci device" code removed this check. Add it back. Reported-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* staging: comedi: remove pci_is_enabled() testsH Hartley Sweeten2012-08-073-7/+0
| | | | | | | | | | | | | As mentioned by Ian Abbott, the comedi pci drivers that try to locate an unused pci device with the pci_is_enabled() test might actually skip over a perfectly good unused device. This test is also not consistent with the other comedi pci drivers. Remove the test from all the comedi pci drivers. Reported-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Linux 3.6-rc1Linus Torvalds2012-08-021-2/+2
|
* Merge branch 'for-linus-3.6' of git://dev.laptop.org/users/dilinger/linux-olpcLinus Torvalds2012-08-0213-164/+451
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull OLPC platform updates from Andres Salomon: "These move the OLPC Embedded Controller driver out of arch/x86/platform and into drivers/platform/olpc. OLPC machines are now ARM-based (which means lots of x86 and ARM changes), but are typically pretty self-contained.. so it makes more sense to go through a separate OLPC tree after getting the appropriate review/ACKs." * 'for-linus-3.6' of git://dev.laptop.org/users/dilinger/linux-olpc: x86: OLPC: move s/r-related EC cmds to EC driver Platform: OLPC: move global variables into priv struct Platform: OLPC: move debugfs support from x86 EC driver x86: OLPC: switch over to using new EC driver on x86 Platform: OLPC: add a suspended flag to the EC driver Platform: OLPC: turn EC driver into a platform_driver Platform: OLPC: allow EC cmd to be overridden, and create a workqueue to call it drivers: OLPC: update various drivers to include olpc-ec.h Platform: OLPC: add a stub to drivers/platform/ for the OLPC EC driver
| * x86: OLPC: move s/r-related EC cmds to EC driverAndres Salomon2012-07-312-22/+36
| | | | | | | | | | | | | | | | | | | | | | The new EC driver calls platform-specific suspend and resume hooks; run XO-1-specific EC commands from there, rather than deep in s/r code. If we attempt to run EC commands after the new EC driver has suspended, it is refused by the ec->suspended checks. Signed-off-by: Andres Salomon <dilinger@queued.net> Acked-by: Paul Fox <pgf@laptop.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
| * Platform: OLPC: move global variables into priv structAndres Salomon2012-07-311-20/+28
| | | | | | | | | | | | | | | | | | Populate olpc_ec_priv with variables that were previously global. This makes things a tad bit clearer, IMO. Signed-off-by: Andres Salomon <dilinger@queued.net> Acked-by: Paul Fox <pgf@laptop.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
| * Platform: OLPC: move debugfs support from x86 EC driverAndres Salomon2012-07-312-97/+117
| | | | | | | | | | | | | | | | | | | | | | | | There's nothing about the debugfs interface for the EC driver that is architecture-specific, so move it into the arch-independent driver. The code is mostly unchanged with the exception of renamed variables, coding style changes, and API updates. Signed-off-by: Andres Salomon <dilinger@queued.net> Acked-by: Paul Fox <pgf@laptop.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
| * x86: OLPC: switch over to using new EC driver on x86Andres Salomon2012-07-313-36/+27
| | | | | | | | | | | | | | | | | | | | | | This uses the new EC driver framework in drivers/platform/olpc. The XO-1 and XO-1.5-specific code is still in arch/x86, but the generic stuff (including a new workqueue; no more running EC commands with IRQs disabled!) can be shared with other architectures. Signed-off-by: Andres Salomon <dilinger@queued.net> Acked-by: Paul Fox <pgf@laptop.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
| * Platform: OLPC: add a suspended flag to the EC driverAndres Salomon2012-07-311-1/+45
| | | | | | | | | | | | | | | | | | | | | | | | | | A problem we've noticed on XO-1.75 is when we suspend in the middle of an EC command. Don't allow that. In the process, create a private object for the generic EC driver to use; we have a framework for passing around a struct, use that rather than a proliferation of global variables. Signed-off-by: Andres Salomon <dilinger@queued.net> Acked-by: Paul Fox <pgf@laptop.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
| * Platform: OLPC: turn EC driver into a platform_driverAndres Salomon2012-07-312-0/+54
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The 1.75-based OLPC EC driver already does this; let's do it for all EC drivers. This gives us nice suspend/resume hooks, amongst other things. We want to run the EC's suspend hooks later than other drivers (which may be setting wakeup masks or be running EC commands). We also want to run the EC's resume hooks earlier than other drivers (which may want to run EC commands). Signed-off-by: Andres Salomon <dilinger@queued.net> Acked-by: Paul Fox <pgf@laptop.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
| * Platform: OLPC: allow EC cmd to be overridden, and create a workqueue to call itAndres Salomon2012-07-312-2/+116
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This provides a new API allows different OLPC architectures to override the EC driver. x86 and ARM OLPC machines use completely different EC backends. The olpc_ec_cmd is synchronous, and waits for the workqueue to send the command to the EC. Multiple callers can run olpc_ec_cmd() at once, and they will by serialized and sleep while only one executes on the EC at a time. We don't provide an unregister function, as that doesn't make sense within the context of OLPC machines - there's only ever 1 EC, it's critical to functionality, and it certainly not hotpluggable. Signed-off-by: Andres Salomon <dilinger@queued.net> Acked-by: Paul Fox <pgf@laptop.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
| * drivers: OLPC: update various drivers to include olpc-ec.hAndres Salomon2012-07-319-3/+8
| | | | | | | | | | | | | | | | | | Switch over to using olpc-ec.h in multiple steps, so as not to break builds. This covers every driver that calls olpc_ec_cmd(). Signed-off-by: Andres Salomon <dilinger@queued.net> Acked-by: Paul Fox <pgf@laptop.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
| * Platform: OLPC: add a stub to drivers/platform/ for the OLPC EC driverAndres Salomon2012-07-316-18/+55
| | | | | | | | | | | | | | | | | | | | | | The OLPC EC driver has outgrown arch/x86/platform/. It's time to both share common code amongst different architectures, as well as move it out of arch/x86/. The XO-1.75 is ARM-based, and the EC driver shares a lot of code with the x86 code. Signed-off-by: Andres Salomon <dilinger@queued.net> Acked-by: Paul Fox <pgf@laptop.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
* | Merge tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2012-08-0243-569/+1387
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull arm-soc Marvell Orion device-tree updates from Olof Johansson: "This contains a set of device-tree conversions for Marvell Orion platforms that were staged early but took a few tries to get the branch into a format where it was suitable for us to pick up. Given that most people working on these platforms are hobbyists with limited time, we were a bit more flexible with merging it even though it came in late." * tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits) ARM: Kirkwood: Replace mrvl with marvell ARM: Kirkwood: Describe GoFlex Net LEDs and SATA in DT. ARM: Kirkwood: Describe Dreamplug LEDs in DT. ARM: Kirkwood: Describe iConnects LEDs in DT. ARM: Kirkwood: Describe iConnects temperature sensor in DT. ARM: Kirkwood: Describe IB62x0 LEDs in DT. ARM: Kirkwood: Describe IB62x0 gpio-keys in DT. ARM: Kirkwood: Describe DNS32? gpio-keys in DT. ARM: Kirkwood: Move common portions into a kirkwood-dnskw.dtsi ARM: Kirkwood: Replace DNS-320/DNS-325 leds with dt bindings ARM: Kirkwood: Describe DNS325 temperature sensor in DT. ARM: Kirkwood: Use DT to configure SATA device. ARM: kirkwood: use devicetree for SPI on dreamplug ARM: kirkwood: Add LS-XHL and LS-CHLv2 support ARM: Kirkwood: Initial DTS support for Kirkwood GoFlex Net ARM: Kirkwood: Add basic device tree support for QNAP TS219. ATA: sata_mv: Add device tree support ARM: Orion: DTify the watchdog timer. ARM: Orion: Add arch support needed for I2C via DT. ARM: kirkwood: use devicetree for orion-spi ... Conflicts: drivers/watchdog/orion_wdt.c
| * \ Merge branch 'marvell/dt' into late2/dtOlof Johansson2012-07-2965-646/+1915
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * marvell/dt: (41 commits) ARM: Kirkwood: Replace mrvl with marvell ARM: Kirkwood: Describe GoFlex Net LEDs and SATA in DT. ARM: Kirkwood: Describe Dreamplug LEDs in DT. ARM: Kirkwood: Describe iConnects LEDs in DT. ARM: Kirkwood: Describe iConnects temperature sensor in DT. ARM: Kirkwood: Describe IB62x0 LEDs in DT. ARM: Kirkwood: Describe IB62x0 gpio-keys in DT. ARM: Kirkwood: Describe DNS32? gpio-keys in DT. ARM: Kirkwood: Move common portions into a kirkwood-dnskw.dtsi ARM: Kirkwood: Replace DNS-320/DNS-325 leds with dt bindings ARM: Kirkwood: Describe DNS325 temperature sensor in DT. ARM: Kirkwood: Use DT to configure SATA device. ARM: kirkwood: use devicetree for SPI on dreamplug ARM: kirkwood: Add LS-XHL and LS-CHLv2 support ARM: Kirkwood: Initial DTS support for Kirkwood GoFlex Net ARM: Kirkwood: Add basic device tree support for QNAP TS219. ATA: sata_mv: Add device tree support ARM: Orion: DTify the watchdog timer. ARM: Orion: Add arch support needed for I2C via DT. ARM: kirkwood: use devicetree for orion-spi ...
| | * | ARM: Kirkwood: Replace mrvl with marvellAndrew Lunn2012-07-276-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | It has been decided to use marvell, not mrvl, in the compatibility property. Search & replace. Signed-off-by: Andrew Lunn <andrew@lunn.ch>
| | * | ARM: Kirkwood: Describe GoFlex Net LEDs and SATA in DT.Andrew Lunn2012-07-272-84/+50
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Josh Coombs <josh.coombs@gmail.com>
| | * | ARM: Kirkwood: Describe Dreamplug LEDs in DT.Andrew Lunn2012-07-272-34/+16
| | | | | | | | | | | | | | | | Signed-off-by: Andrew Lunn <andrew@lunn.ch>
| | * | ARM: Kirkwood: Describe iConnects LEDs in DT.Andrew Lunn2012-07-272-46/+34
| | | | | | | | | | | | | | | | Signed-off-by: Andrew Lunn <andrew@lunn.ch>
| | * | ARM: Kirkwood: Describe iConnects temperature sensor in DT.Andrew Lunn2012-07-272-10/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that we have I2C support in DT, describe the LM63 in the DT file for the iConnect. Signed-off-by: Andrew Lunn <andrew@lunn.ch>
| | * | ARM: Kirkwood: Describe IB62x0 LEDs in DT.Andrew Lunn2012-07-272-36/+17
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Simon Baatz <gmbnomis@gmail.com>
| | * | ARM: Kirkwood: Describe IB62x0 gpio-keys in DT.Andrew Lunn2012-07-272-31/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that the GPIO controllers have been converted over to DT, described the gpio-keys in DT. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Simon Baatz <gmbnomis@gmail.com>
| | * | ARM: Kirkwood: Describe DNS32? gpio-keys in DT.Jamie Lentin2012-07-272-37/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Move description of GPIO keys on both the DNS320 and DNS325 into DT. Signed-off-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
| | * | ARM: Kirkwood: Move common portions into a kirkwood-dnskw.dtsiJamie Lentin2012-07-273-82/+50
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A lot of device setup is shared between DNS-320 and DNS-325, move the definitions into a common include. Signed-off-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
| | * | ARM: Kirkwood: Replace DNS-320/DNS-325 leds with dt bindingsJamie Lentin2012-07-273-90/+50
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace code in board-dnskw with the equivalent devicetree bindings. Signed-off-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
| | * | ARM: Kirkwood: Describe DNS325 temperature sensor in DT.Andrew Lunn2012-07-272-13/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that we have I2C support in DT, describe the LM75 in the DT file for the DNS325. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jamie Lentin <jm@lentin.co.uk>
| | * | ARM: Kirkwood: Use DT to configure SATA device.Andrew Lunn2012-07-279-20/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert boards using DT, but the old way of configuring SATA to now use properties in there DT file. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Simon Baatz <gmbnomis@gmail.com>
| | * | ARM: kirkwood: use devicetree for SPI on dreamplugMichael Walle2012-07-272-41/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the device tree for the SPI driver and partition layout. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
| | * | ARM: kirkwood: Add LS-XHL and LS-CHLv2 supportMichael Walle2012-07-279-0/+291
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for Buffalo Linkstation LS-XHL and LS-CHLv2 using the device tree where possible. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
| | * | ARM: Kirkwood: Initial DTS support for Kirkwood GoFlex NetJosh Coombs2012-07-277-0/+224
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch supplies the necessary DTS and supporting files to boot up a Seagate GoFlex Net with 3.5.0-rc3. Signed-off-by: Joshua Coombs <josh.coombs@gmail.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
| | * | ARM: Kirkwood: Add basic device tree support for QNAP TS219.Andrew Lunn2012-07-279-0/+228
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The two different variants of QNAP TS devices, varying by SoC, put the GPIO keys on different GPIO lines. Hence we need two different DT board descriptions, which share the same board-ts219.c file. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Jason Cooper <jason@lakedaemon.net>
| | * | ATA: sata_mv: Add device tree supportAndrew Lunn2012-07-274-13/+53
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for instantiating this driver from device tree, and add the necassary DT information to the kirkwood.dtsi file. This is based on previous work by Michael Walle and Jason Cooper. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Josh Coombs <josh.coombs@gmail.com>
| | * | ARM: Orion: DTify the watchdog timer.Andrew Lunn2012-07-274-1/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add device tree support to the Orion watchdog timer, and enable its use in the kirkwood devices using device tree. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@googlemail.com> Tested-by: Simon Baatz <gmbnomis@gmail.com>
| | * | ARM: Orion: Add arch support needed for I2C via DT.Andrew Lunn2012-07-274-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MV64XXX I2C driver needs a clock in order to calculate the baud rate factors. So add an clk to the clk tree. Also add the base DT properties for kirkwood devices. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Conflicts: arch/arm/mach-kirkwood/common.c
| | * | ARM: kirkwood: use devicetree for orion-spiMichael Walle2012-07-272-1/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Populate the devices with auxdata to set the device names which are used by clkdev to lookup the clocks. Signed-off-by: Michael Walle <micheal@walle.cc> Signed-off-by: Andrew Lunn <andrew@lunn.ch> --- v2: Add interrupts properties, although not used.
| | * | ARM: Orion: DT support for IRQ and GPIO ControllersAndrew Lunn2012-07-2713-132/+307
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Both IRQ and GPIO controllers can now be represented in DT. The IRQ controllers are setup first, and then the GPIO controllers. Interrupts for GPIO lines are placed directly after the main interrupts in the interrupt space. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@googlemail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Josh Coombs <josh.coombs@gmail.com> Tested-by: Simon Baatz <gmbnomis@gmail.com>
| | * | Merge branch 'v3.5-rc7-fixes' into v3.5-rc7-dt-v3Andrew Lunn2012-07-2716-30/+98
| | |\ \ | | | | | | | | | | | | | | | | | | | | Merge in branch already pulled. Fulfils dependancies needed by this patchset.
| | * \ \ Merge tag 'spi-3.6' into v3.5-rc7-dt-v3Andrew Lunn2012-07-2713-47/+430
| | |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | spi: Updates for 3.6 Since Grant is even more specacularly busy than usual for the time being I've been collecting SPI patches for him for this release - probably things will revert back to Grant before the next release. There's nothing too exciting here, mostly it's simple driver specific stuff: - Add spi: to the modaliases of SPI devices to provide namespacing. - A driver for AD-FMCOMMS1-EBZ. - DT binding for Orion. - Fixes and cleanups for i.MX, PL0022, OMAP and bitbang drivers. There may be a few more fixes I've missed, people keep sending me new things.
* | | \ \ \ Merge tag 'pm2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds2012-08-023-47/+103
|\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull arm-soc cpuidle enablement for OMAP from Olof Johansson: "Coupled cpuidle was meant to merge for 3.5 through Len Brown's tree, but didn't go in because the pull request ended up rejected. So it just got merged, and we got this staged branch that enables the coupled cpuidle code on OMAP. With a stable git workflow from the other maintainer we could have staged this earlier, but that wasn't the case so we have had to merge it late. The alternative is to hold it off until 3.7 but given that the code is well-isolated to OMAP and they are eager to see it go in, I didn't push back hard in that direction." * tag 'pm2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: OMAP4: CPUidle: Open broadcast clock-event device. ARM: OMAP4: CPUidle: add synchronization for coupled idle states ARM: OMAP4: CPUidle: Use coupled cpuidle states to implement SMP cpuidle. ARM: OMAP: timer: allow gp timer clock-event to be used on both cpus
| * \ \ \ \ \ Merge branch 'for_3.6/pm/coupled-cpuidle' of ↵Olof Johansson2012-07-273-45/+101
| |\ \ \ \ \ \ | | |/ / / / / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into late2/pm * 'for_3.6/pm/coupled-cpuidle' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm: ARM: OMAP4: CPUidle: Open broadcast clock-event device. ARM: OMAP4: CPUidle: add synchronization for coupled idle states ARM: OMAP4: CPUidle: Use coupled cpuidle states to implement SMP cpuidle. ARM: OMAP: timer: allow gp timer clock-event to be used on both cpus
| | * | | | | ARM: OMAP4: CPUidle: Open broadcast clock-event device.Santosh Shilimkar2012-07-251-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | OMAP4 idle driver uses CLOCK_EVT_NOTIFY_BROADCAST_[ENTER/EXIT] for broadcast clock events. But _ENTER/_EXIT doesn't really open broadcast clock events and to explicitly setup the broadcast device, CLOCK_EVT_NOTIFY_BROADCAST_ON should be used. Add the missing CLOCK_EVT_NOTIFY_BROADCAST_ON clockevent notifications. This will setup the broadcast timer in either periodic/oneshot modes correctly. Recent clockevent infrastructure change 77b0d60 {leave the broadcast device in shutdown mode when not needed} exposed this bug leading to boot hangs in oneshot mode. Prior to this, periodic broadcast mode was also broken. This change fixes both the periodic/oneshot broadcast modes. Discussion thread : https://lkml.org/lkml/2012/4/9/13 Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
| | * | | | | ARM: OMAP4: CPUidle: add synchronization for coupled idle statesKevin Hilman2012-07-251-1/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With coupled idle states, a failure for any CPU to hit a low power state must be coordinated such that all CPUs abort. On OMAP4, when entering a coupled state, CPU0 has to wait for CPU1 to enter its low power state before it can enter its low power state. This is implemented by letting CPU0 wait for the CPU1 powerdomain to hit off. However, there are conditions where CPU1 might abort/fail and not hit off while CPU0 is waiting for it. For example, a CPU1 wakeup or a failed attempt to hit off due to hardware conditions. To avoid the deadlock where CPU0 would continually wait for CPU1 to hit off-mode, this patch adds a flag to signal when each CPU has come out of its low-power state. CPU0 then checks whether CPU1 has hit off *or* has already completed its attempt to hit off. If the latter, CPU0 must abort its attempt to hit a low-power state so the coupled state enter method can return. In addition, cpuidle_coupled_parallel_barrier() is used to ensure the clearing of the 'done' flag is synchronized on all CPUs. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
| | * | | | | ARM: OMAP4: CPUidle: Use coupled cpuidle states to implement SMP cpuidle.Santosh Shilimkar2012-07-252-46/+67
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | OMAP4 CPUDILE driver is converted mainly based on notes from the coupled cpuidle patch series. The changes include : - Register both CPUs and C-states to cpuidle driver. - Set struct cpuidle_device.coupled_cpus - Set struct cpuidle_device.safe_state to non coupled state. - Set CPUIDLE_FLAG_COUPLED in struct cpuidle_state.flags for each state that affects multiple cpus. - Separate ->enter hooks for coupled & simple idle. - CPU0 wait loop for CPU1 power transition. - CPU1 wakeup mechanism for the idle exit. - Enabling ARCH_NEEDS_CPU_IDLE_COUPLED for OMAP4. Thanks to Kevin Hilman and Colin Cross on the suggestions/fixes on the intermediate version of this patch. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
| | * | | | | ARM: OMAP: timer: allow gp timer clock-event to be used on both cpusSantosh Shilimkar2012-07-251-1/+3
| |/ / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For coupled cpuidle to work when both cpus are active, it needs a global timer that can handle events for both cpus. This timer is used as the broadcast clock-event when the per-cpu timer hardware stop in low power states. Set the cpumask of clockevent_gpt to all cpus, set the rating correctly, and set the irq to allow the clockevent core to determine the affinity of the timer. Signed-off-by: Colin Cross <ccross@android.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
* | | | | | Merge tag 'fixes-for-linus' of ↵Linus Torvalds2012-08-024-4/+6
|\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A few fixes for merge window fallout, and a bugfix for timer resume on PRIMA2." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: mmp: add missing irqs.h arm: mvebu: fix typo in .dtsi comment for Armada XP SoCs ARM: PRIMA2: delete redundant codes to restore LATCHED when timer resumes ARM: mxc: Include missing irqs.h header
| * | | | | | ARM: mmp: add missing irqs.hHaojian Zhuang2012-08-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | arch/arm/mach-mmp/gplugd.c:195:13: error: ‘MMP_NR_IRQS’ undeclared here (not in a function) make[1]: *** [arch/arm/mach-mmp/gplugd.o] Error 1 Include <mach/irqs.h> to fix this issue. Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net>
| * | | | | | arm: mvebu: fix typo in .dtsi comment for Armada XP SoCsThomas Petazzoni2012-08-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The comment was wrongly referring to Armada 370 while the file is related to Armada XP. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
| * | | | | | ARM: PRIMA2: delete redundant codes to restore LATCHED when timer resumesBarry Song2012-08-021-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The only way to write LATCHED registers to write LATCH_BIT to LATCH register, that will latch COUNTER into LATCHED.e.g. writel_relaxed(SIRFSOC_TIMER_LATCH_BIT, sirfsoc_timer_base + SIRFSOC_TIMER_LATCH); Writing values to LATCHED registers directly is useless at all. Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Olof Johansson <olof@lixom.net>
| * | | | | | ARM: mxc: Include missing irqs.h headerFabio Estevam2012-07-281-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Include irqs.h in order to fix the following build error: arch/arm/plat-mxc/tzic.c:195:11: error: 'FIQ_START' undeclared (first use in this function) Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Dirk Behme <dirk.behme@de.bosch.com> Signed-off-by: Olof Johansson <olof@lixom.net>
* | | | | | | Merge tag 'sh-for-linus' of git://github.com/pmundt/linux-shLinus Torvalds2012-08-0229-47/+419
|\ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull SuperH fixes from Paul Mundt. * tag 'sh-for-linus' of git://github.com/pmundt/linux-sh: (24 commits) sh: explicitly include sh_dma.h in setup-sh7722.c sh: ecovec: care CN5 VBUS if USB host mode sh: sh7724: fixup renesas_usbhs clock settings sh: intc: initial irqdomain support. sh: pfc: Fix up init ordering mess. serial: sh-sci: fix compilation breakage, when DMA is enabled dmaengine: shdma: restore partial transfer calculation sh: modify the sh_dmae_slave_config for RSPI in setup-sh7757 sh: Fix up recursive fault in oops with unset TTB. sh: pfc: Build fix for pinctrl_remove_gpio_range() changes. sh: select the fixed regulator driver on several boards sh: ecovec: switch MMC power control to regulators sh: add fixed voltage regulators to se7724 sh: add fixed voltage regulators to sdk7786 sh: add fixed voltage regulators to rsk sh: add fixed voltage regulators to migor sh: add fixed voltage regulators to kfr2r09 sh: add fixed voltage regulators to ap325rxa sh: add fixed voltage regulators to sh7757lcr sh: add fixed voltage regulators to sh2007 ...
OpenPOWER on IntegriCloud