diff options
Diffstat (limited to 'sound/usb/mixer.c')
| -rw-r--r-- | sound/usb/mixer.c | 109 |
1 files changed, 59 insertions, 50 deletions
diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c index 60f65ace7474..c5444e00f0c6 100644 --- a/sound/usb/mixer.c +++ b/sound/usb/mixer.c @@ -765,10 +765,60 @@ static void usb_mixer_elem_free(struct snd_kcontrol *kctl) * interface to ALSA control for feature/mixer units */ +/* volume control quirks */ +static void volume_control_quirks(struct usb_mixer_elem_info *cval, + struct snd_kcontrol *kctl) +{ + switch (cval->mixer->chip->usb_id) { + case USB_ID(0x0471, 0x0101): + case USB_ID(0x0471, 0x0104): + case USB_ID(0x0471, 0x0105): + case USB_ID(0x0672, 0x1041): + /* quirk for UDA1321/N101. + * note that detection between firmware 2.1.1.7 (N101) + * and later 2.1.1.21 is not very clear from datasheets. + * I hope that the min value is -15360 for newer firmware --jk + */ + if (!strcmp(kctl->id.name, "PCM Playback Volume") && + cval->min == -15616) { + snd_printk(KERN_INFO + "set volume quirk for UDA1321/N101 chip\n"); + cval->max = -256; + } + break; + + case USB_ID(0x046d, 0x09a4): + if (!strcmp(kctl->id.name, "Mic Capture Volume")) { + snd_printk(KERN_INFO + "set volume quirk for QuickCam E3500\n"); + cval->min = 6080; + cval->max = 8768; + cval->res = 192; + } + break; + + case USB_ID(0x046d, 0x0808): + case USB_ID(0x046d, 0x0809): + case USB_ID(0x046d, 0x0991): + /* Most audio usb devices lie about volume resolution. + * Most Logitech webcams have res = 384. + * Proboly there is some logitech magic behind this number --fishor + */ + if (!strcmp(kctl->id.name, "Mic Capture Volume")) { + snd_printk(KERN_INFO + "set resolution quirk: cval->res = 384\n"); + cval->res = 384; + } + break; + + } +} + /* * retrieve the minimum and maximum values for the specified control */ -static int get_min_max(struct usb_mixer_elem_info *cval, int default_min) +static int get_min_max_with_quirks(struct usb_mixer_elem_info *cval, + int default_min, struct snd_kcontrol *kctl) { /* for failsafe */ cval->min = default_min; @@ -844,6 +894,9 @@ static int get_min_max(struct usb_mixer_elem_info *cval, int default_min) cval->initialized = 1; } + if (kctl) + volume_control_quirks(cval, kctl); + /* USB descriptions contain the dB scale in 1/256 dB unit * while ALSA TLV contains in 1/100 dB unit */ @@ -864,6 +917,7 @@ static int get_min_max(struct usb_mixer_elem_info *cval, int default_min) return 0; } +#define get_min_max(cval, def) get_min_max_with_quirks(cval, def, NULL) /* get a feature/mixer unit info */ static int mixer_ctl_feature_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) @@ -882,7 +936,7 @@ static int mixer_ctl_feature_info(struct snd_kcontrol *kcontrol, struct snd_ctl_ uinfo->value.integer.max = 1; } else { if (!cval->initialized) { - get_min_max(cval, 0); + get_min_max_with_quirks(cval, 0, kcontrol); if (cval->initialized && cval->dBmin >= cval->dBmax) { kcontrol->vd[0].access &= ~(SNDRV_CTL_ELEM_ACCESS_TLV_READ | @@ -1045,9 +1099,6 @@ static void build_feature_ctl(struct mixer_build *state, void *raw_desc, cval->ch_readonly = readonly_mask; } - /* get min/max values */ - get_min_max(cval, 0); - /* if all channels in the mask are marked read-only, make the control * read-only. set_cur_mix_value() will check the mask again and won't * issue write commands to read-only channels. */ @@ -1069,6 +1120,9 @@ static void build_feature_ctl(struct mixer_build *state, void *raw_desc, len = snd_usb_copy_string_desc(state, nameid, kctl->id.name, sizeof(kctl->id.name)); + /* get min/max values */ + get_min_max_with_quirks(cval, 0, kctl); + switch (control) { case UAC_FU_MUTE: case UAC_FU_VOLUME: @@ -1118,51 +1172,6 @@ static void build_feature_ctl(struct mixer_build *state, void *raw_desc, break; } - /* volume control quirks */ - switch (state->chip->usb_id) { - case USB_ID(0x0471, 0x0101): - case USB_ID(0x0471, 0x0104): - case USB_ID(0x0471, 0x0105): - case USB_ID(0x0672, 0x1041): - /* quirk for UDA1321/N101. - * note that detection between firmware 2.1.1.7 (N101) - * and later 2.1.1.21 is not very clear from datasheets. - * I hope that the min value is -15360 for newer firmware --jk - */ - if (!strcmp(kctl->id.name, "PCM Playback Volume") && - cval->min == -15616) { - snd_printk(KERN_INFO - "set volume quirk for UDA1321/N101 chip\n"); - cval->max = -256; - } - break; - - case USB_ID(0x046d, 0x09a4): - if (!strcmp(kctl->id.name, "Mic Capture Volume")) { - snd_printk(KERN_INFO - "set volume quirk for QuickCam E3500\n"); - cval->min = 6080; - cval->max = 8768; - cval->res = 192; - } - break; - - case USB_ID(0x046d, 0x0808): - case USB_ID(0x046d, 0x0809): - case USB_ID(0x046d, 0x0991): - /* Most audio usb devices lie about volume resolution. - * Most Logitech webcams have res = 384. - * Proboly there is some logitech magic behind this number --fishor - */ - if (!strcmp(kctl->id.name, "Mic Capture Volume")) { - snd_printk(KERN_INFO - "set resolution quirk: cval->res = 384\n"); - cval->res = 384; - } - break; - - } - range = (cval->max - cval->min) / cval->res; /* Are there devices with volume range more than 255? I use a bit more * to be sure. 384 is a resolution magic number found on Logitech |
