summaryrefslogtreecommitdiffstats
path: root/sound/soc/codecs/wm8994.c
diff options
context:
space:
mode:
Diffstat (limited to 'sound/soc/codecs/wm8994.c')
-rw-r--r--sound/soc/codecs/wm8994.c43
1 files changed, 29 insertions, 14 deletions
diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c
index 6b73efd26991..9c982e47eb99 100644
--- a/sound/soc/codecs/wm8994.c
+++ b/sound/soc/codecs/wm8994.c
@@ -56,7 +56,7 @@ static int wm8994_retune_mobile_base[] = {
static int wm8994_readable(struct snd_soc_codec *codec, unsigned int reg)
{
struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec);
- struct wm8994 *control = wm8994->control_data;
+ struct wm8994 *control = codec->control_data;
switch (reg) {
case WM8994_GPIO_1:
@@ -3030,19 +3030,34 @@ static irqreturn_t wm8958_mic_irq(int irq, void *data)
{
struct wm8994_priv *wm8994 = data;
struct snd_soc_codec *codec = wm8994->codec;
- int reg;
+ int reg, count;
- reg = snd_soc_read(codec, WM8958_MIC_DETECT_3);
- if (reg < 0) {
- dev_err(codec->dev, "Failed to read mic detect status: %d\n",
- reg);
- return IRQ_NONE;
- }
+ /* We may occasionally read a detection without an impedence
+ * range being provided - if that happens loop again.
+ */
+ count = 10;
+ do {
+ reg = snd_soc_read(codec, WM8958_MIC_DETECT_3);
+ if (reg < 0) {
+ dev_err(codec->dev,
+ "Failed to read mic detect status: %d\n",
+ reg);
+ return IRQ_NONE;
+ }
- if (!(reg & WM8958_MICD_VALID)) {
- dev_dbg(codec->dev, "Mic detect data not valid\n");
- goto out;
- }
+ if (!(reg & WM8958_MICD_VALID)) {
+ dev_dbg(codec->dev, "Mic detect data not valid\n");
+ goto out;
+ }
+
+ if (!(reg & WM8958_MICD_STS) || (reg & WM8958_MICD_LVL_MASK))
+ break;
+
+ msleep(1);
+ } while (count--);
+
+ if (count == 0)
+ dev_warn(codec->dev, "No impedence range reported for jack\n");
#ifndef CONFIG_SND_SOC_WM8994_MODULE
trace_snd_soc_jack_irq(dev_name(codec->dev));
@@ -3180,9 +3195,9 @@ static int wm8994_codec_probe(struct snd_soc_codec *codec)
wm8994_request_irq(codec->control_data, WM8994_IRQ_FIFOS_ERR,
wm8994_fifo_error, "FIFO error", codec);
- wm8994_request_irq(wm8994->control_data, WM8994_IRQ_TEMP_WARN,
+ wm8994_request_irq(codec->control_data, WM8994_IRQ_TEMP_WARN,
wm8994_temp_warn, "Thermal warning", codec);
- wm8994_request_irq(wm8994->control_data, WM8994_IRQ_TEMP_SHUT,
+ wm8994_request_irq(codec->control_data, WM8994_IRQ_TEMP_SHUT,
wm8994_temp_shut, "Thermal shutdown", codec);
ret = wm8994_request_irq(codec->control_data, WM8994_IRQ_DCS_DONE,
OpenPOWER on IntegriCloud