summaryrefslogtreecommitdiffstats
path: root/include/asm-v850
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-v850')
-rw-r--r--include/asm-v850/Kbuild1
-rw-r--r--include/asm-v850/a.out.h21
-rw-r--r--include/asm-v850/anna.h137
-rw-r--r--include/asm-v850/as85ep1.h152
-rw-r--r--include/asm-v850/asm.h32
-rw-r--r--include/asm-v850/atomic.h131
-rw-r--r--include/asm-v850/auxvec.h4
-rw-r--r--include/asm-v850/bitops.h161
-rw-r--r--include/asm-v850/bug.h25
-rw-r--r--include/asm-v850/bugs.h16
-rw-r--r--include/asm-v850/byteorder.h48
-rw-r--r--include/asm-v850/cache.h26
-rw-r--r--include/asm-v850/cacheflush.h70
-rw-r--r--include/asm-v850/checksum.h112
-rw-r--r--include/asm-v850/clinkage.h26
-rw-r--r--include/asm-v850/cputime.h6
-rw-r--r--include/asm-v850/current.h47
-rw-r--r--include/asm-v850/delay.h47
-rw-r--r--include/asm-v850/device.h7
-rw-r--r--include/asm-v850/div64.h1
-rw-r--r--include/asm-v850/dma-mapping.h11
-rw-r--r--include/asm-v850/dma.h18
-rw-r--r--include/asm-v850/elf.h99
-rw-r--r--include/asm-v850/emergency-restart.h6
-rw-r--r--include/asm-v850/entry.h113
-rw-r--r--include/asm-v850/errno.h6
-rw-r--r--include/asm-v850/fb.h12
-rw-r--r--include/asm-v850/fcntl.h11
-rw-r--r--include/asm-v850/flat.h133
-rw-r--r--include/asm-v850/fpga85e2c.h82
-rw-r--r--include/asm-v850/futex.h6
-rw-r--r--include/asm-v850/gbus_int.h97
-rw-r--r--include/asm-v850/hardirq.h28
-rw-r--r--include/asm-v850/highres_timer.h44
-rw-r--r--include/asm-v850/hw_irq.h4
-rw-r--r--include/asm-v850/io.h142
-rw-r--r--include/asm-v850/ioctl.h1
-rw-r--r--include/asm-v850/ioctls.h84
-rw-r--r--include/asm-v850/ipcbuf.h29
-rw-r--r--include/asm-v850/irq.h55
-rw-r--r--include/asm-v850/irq_regs.h1
-rw-r--r--include/asm-v850/kdebug.h1
-rw-r--r--include/asm-v850/kmap_types.h19
-rw-r--r--include/asm-v850/kvm.h6
-rw-r--r--include/asm-v850/linkage.h8
-rw-r--r--include/asm-v850/local.h6
-rw-r--r--include/asm-v850/ma.h101
-rw-r--r--include/asm-v850/ma1.h50
-rw-r--r--include/asm-v850/machdep.h60
-rw-r--r--include/asm-v850/macrology.h17
-rw-r--r--include/asm-v850/me2.h182
-rw-r--r--include/asm-v850/mman.h15
-rw-r--r--include/asm-v850/mmu.h11
-rw-r--r--include/asm-v850/mmu_context.h13
-rw-r--r--include/asm-v850/module.h62
-rw-r--r--include/asm-v850/msgbuf.h31
-rw-r--r--include/asm-v850/mutex.h9
-rw-r--r--include/asm-v850/namei.h17
-rw-r--r--include/asm-v850/page.h128
-rw-r--r--include/asm-v850/param.h33
-rw-r--r--include/asm-v850/pci.h119
-rw-r--r--include/asm-v850/percpu.h14
-rw-r--r--include/asm-v850/pgalloc.h22
-rw-r--r--include/asm-v850/pgtable.h59
-rw-r--r--include/asm-v850/poll.h9
-rw-r--r--include/asm-v850/posix_types.h72
-rw-r--r--include/asm-v850/processor.h120
-rw-r--r--include/asm-v850/ptrace.h121
-rw-r--r--include/asm-v850/resource.h6
-rw-r--r--include/asm-v850/rte_cb.h78
-rw-r--r--include/asm-v850/rte_ma1_cb.h128
-rw-r--r--include/asm-v850/rte_mb_a_pci.h56
-rw-r--r--include/asm-v850/rte_me2_cb.h202
-rw-r--r--include/asm-v850/rte_nb85e_cb.h111
-rw-r--r--include/asm-v850/scatterlist.h31
-rw-r--r--include/asm-v850/sections.h6
-rw-r--r--include/asm-v850/segment.h36
-rw-r--r--include/asm-v850/semaphore.h1
-rw-r--r--include/asm-v850/sembuf.h25
-rw-r--r--include/asm-v850/serial.h56
-rw-r--r--include/asm-v850/setup.h6
-rw-r--r--include/asm-v850/shmbuf.h42
-rw-r--r--include/asm-v850/shmparam.h6
-rw-r--r--include/asm-v850/sigcontext.h25
-rw-r--r--include/asm-v850/siginfo.h6
-rw-r--r--include/asm-v850/signal.h168
-rw-r--r--include/asm-v850/sim.h47
-rw-r--r--include/asm-v850/sim85e2.h69
-rw-r--r--include/asm-v850/sim85e2c.h26
-rw-r--r--include/asm-v850/sim85e2s.h28
-rw-r--r--include/asm-v850/simsyscall.h99
-rw-r--r--include/asm-v850/socket.h57
-rw-r--r--include/asm-v850/sockios.h13
-rw-r--r--include/asm-v850/stat.h73
-rw-r--r--include/asm-v850/statfs.h6
-rw-r--r--include/asm-v850/string.h25
-rw-r--r--include/asm-v850/system.h123
-rw-r--r--include/asm-v850/teg.h101
-rw-r--r--include/asm-v850/termbits.h200
-rw-r--r--include/asm-v850/termios.h90
-rw-r--r--include/asm-v850/thread_info.h129
-rw-r--r--include/asm-v850/timex.h18
-rw-r--r--include/asm-v850/tlb.h21
-rw-r--r--include/asm-v850/tlbflush.h64
-rw-r--r--include/asm-v850/topology.h6
-rw-r--r--include/asm-v850/types.h36
-rw-r--r--include/asm-v850/uaccess.h159
-rw-r--r--include/asm-v850/ucontext.h14
-rw-r--r--include/asm-v850/unaligned.h22
-rw-r--r--include/asm-v850/unistd.h244
-rw-r--r--include/asm-v850/user.h52
-rw-r--r--include/asm-v850/v850e.h21
-rw-r--r--include/asm-v850/v850e2.h69
-rw-r--r--include/asm-v850/v850e2_cache.h75
-rw-r--r--include/asm-v850/v850e_cache.h48
-rw-r--r--include/asm-v850/v850e_intc.h133
-rw-r--r--include/asm-v850/v850e_timer_c.h48
-rw-r--r--include/asm-v850/v850e_timer_d.h62
-rw-r--r--include/asm-v850/v850e_uart.h76
-rw-r--r--include/asm-v850/v850e_uarta.h278
-rw-r--r--include/asm-v850/v850e_uartb.h262
-rw-r--r--include/asm-v850/v850e_utils.h35
122 files changed, 0 insertions, 7175 deletions
diff --git a/include/asm-v850/Kbuild b/include/asm-v850/Kbuild
deleted file mode 100644
index c68e1680da01..000000000000
--- a/include/asm-v850/Kbuild
+++ /dev/null
@@ -1 +0,0 @@
-include include/asm-generic/Kbuild.asm
diff --git a/include/asm-v850/a.out.h b/include/asm-v850/a.out.h
deleted file mode 100644
index e9439a0708f6..000000000000
--- a/include/asm-v850/a.out.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#ifndef __V850_A_OUT_H__
-#define __V850_A_OUT_H__
-
-struct exec
-{
- unsigned long a_info; /* Use macros N_MAGIC, etc for access */
- unsigned a_text; /* length of text, in bytes */
- unsigned a_data; /* length of data, in bytes */
- unsigned a_bss; /* length of uninitialized data area for file, in bytes */
- unsigned a_syms; /* length of symbol table data in file, in bytes */
- unsigned a_entry; /* start address */
- unsigned a_trsize; /* length of relocation info for text, in bytes */
- unsigned a_drsize; /* length of relocation info for data, in bytes */
-};
-
-#define N_TRSIZE(a) ((a).a_trsize)
-#define N_DRSIZE(a) ((a).a_drsize)
-#define N_SYMSIZE(a) ((a).a_syms)
-
-
-#endif /* __V850_A_OUT_H__ */
diff --git a/include/asm-v850/anna.h b/include/asm-v850/anna.h
deleted file mode 100644
index cd5eaee103b0..000000000000
--- a/include/asm-v850/anna.h
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * include/asm-v850/anna.h -- Anna V850E2 evaluation cpu chip/board
- *
- * Copyright (C) 2001,02,03 NEC Electronics Corporation
- * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_ANNA_H__
-#define __V850_ANNA_H__
-
-#include <asm/v850e2.h> /* Based on V850E2 core. */
-
-
-#define CPU_MODEL "v850e2/anna"
-#define CPU_MODEL_LONG "NEC V850E2/Anna"
-#define PLATFORM "anna"
-#define PLATFORM_LONG "NEC/Midas lab V850E2/Anna evaluation board"
-
-#define CPU_CLOCK_FREQ 200000000 /* 200MHz */
-#define SYS_CLOCK_FREQ 33300000 /* 33.3MHz */
-
-
-/* 1MB of static RAM. This memory is mirrored 64 times. */
-#define SRAM_ADDR 0x04000000
-#define SRAM_SIZE 0x00100000 /* 1MB */
-/* 64MB of DRAM. */
-#define SDRAM_ADDR 0x08000000
-#define SDRAM_SIZE 0x04000000 /* 64MB */
-
-
-/* For <asm/page.h> */
-#define PAGE_OFFSET SRAM_ADDR
-
-/* We use on-chip RAM, for a few miscellaneous variables that must be
- accessible using a load instruction relative to R0. The Anna chip has
- 128K of `dLB' ram nominally located at 0xFFF00000, but it's mirrored
- every 128K, so we can use the `last mirror' (except for the portion at
- the top which is overridden by I/O space). In addition, the early
- sample chip we're using has lots of memory errors in the dLB ram, so we
- use a specially chosen location that has at least 20 bytes of contiguous
- valid memory (xxxF0020 - xxxF003F). */
-#define R0_RAM_ADDR 0xFFFF8020
-
-
-/* Anna specific control registers. */
-#define ANNA_ILBEN_ADDR 0xFFFFF7F2
-#define ANNA_ILBEN (*(volatile u16 *)ANNA_ILBEN_ADDR)
-
-
-/* I/O port P0-P3. */
-/* Direct I/O. Bits 0-7 are pins Pn0-Pn7. */
-#define ANNA_PORT_IO_ADDR(n) (0xFFFFF400 + (n) * 2)
-#define ANNA_PORT_IO(n) (*(volatile u8 *)ANNA_PORT_IO_ADDR(n))
-/* Port mode (for direct I/O, 0 = output, 1 = input). */
-#define ANNA_PORT_PM_ADDR(n) (0xFFFFF410 + (n) * 2)
-#define ANNA_PORT_PM(n) (*(volatile u8 *)ANNA_PORT_PM_ADDR(n))
-
-
-/* Hardware-specific interrupt numbers (in the kernel IRQ namespace). */
-#define IRQ_INTP(n) (n) /* Pnnn (pin) interrupts 0-15 */
-#define IRQ_INTP_NUM 16
-#define IRQ_INTOV(n) (0x10 + (n)) /* 0-2 */
-#define IRQ_INTOV_NUM 2
-#define IRQ_INTCCC(n) (0x12 + (n))
-#define IRQ_INTCCC_NUM 4
-#define IRQ_INTCMD(n) (0x16 + (n)) /* interval timer interrupts 0-5 */
-#define IRQ_INTCMD_NUM 6
-#define IRQ_INTDMA(n) (0x1C + (n)) /* DMA interrupts 0-3 */
-#define IRQ_INTDMA_NUM 4
-#define IRQ_INTDMXER 0x20
-#define IRQ_INTSRE(n) (0x21 + (n)*3) /* UART 0-1 reception error */
-#define IRQ_INTSRE_NUM 2
-#define IRQ_INTSR(n) (0x22 + (n)*3) /* UART 0-1 reception completion */
-#define IRQ_INTSR_NUM 2
-#define IRQ_INTST(n) (0x23 + (n)*3) /* UART 0-1 transmission completion */
-#define IRQ_INTST_NUM 2
-
-#define NUM_CPU_IRQS 64
-
-#ifndef __ASSEMBLY__
-/* Initialize chip interrupts. */
-extern void anna_init_irqs (void);
-#endif
-
-
-/* Anna UART details (basically the same as the V850E/MA1, but 2 channels). */
-#define V850E_UART_NUM_CHANNELS 2
-#define V850E_UART_BASE_FREQ (SYS_CLOCK_FREQ / 2)
-#define V850E_UART_CHIP_NAME "V850E2/NA85E2A"
-
-/* This is the UART channel that's actually connected on the board. */
-#define V850E_UART_CONSOLE_CHANNEL 1
-
-/* This is a function that gets called before configuring the UART. */
-#define V850E_UART_PRE_CONFIGURE anna_uart_pre_configure
-#ifndef __ASSEMBLY__
-extern void anna_uart_pre_configure (unsigned chan,
- unsigned cflags, unsigned baud);
-#endif
-
-/* This board supports RTS/CTS for the on-chip UART, but only for channel 1. */
-
-/* CTS for UART channel 1 is pin P37 (bit 7 of port 3). */
-#define V850E_UART_CTS(chan) ((chan) == 1 ? !(ANNA_PORT_IO(3) & 0x80) : 1)
-/* RTS for UART channel 1 is pin P07 (bit 7 of port 0). */
-#define V850E_UART_SET_RTS(chan, val) \
- do { \
- if (chan == 1) { \
- unsigned old = ANNA_PORT_IO(0); \
- if (val) \
- ANNA_PORT_IO(0) = old & ~0x80; \
- else \
- ANNA_PORT_IO(0) = old | 0x80; \
- } \
- } while (0)
-
-
-/* Timer C details. */
-#define V850E_TIMER_C_BASE_ADDR 0xFFFFF600
-
-/* Timer D details (the Anna actually has 5 of these; should change later). */
-#define V850E_TIMER_D_BASE_ADDR 0xFFFFF540
-#define V850E_TIMER_D_TMD_BASE_ADDR (V850E_TIMER_D_BASE_ADDR + 0x0)
-#define V850E_TIMER_D_CMD_BASE_ADDR (V850E_TIMER_D_BASE_ADDR + 0x2)
-#define V850E_TIMER_D_TMCD_BASE_ADDR (V850E_TIMER_D_BASE_ADDR + 0x4)
-
-#define V850E_TIMER_D_BASE_FREQ SYS_CLOCK_FREQ
-#define V850E_TIMER_D_TMCD_CS_MIN 1 /* min 2^1 divider */
-
-
-#endif /* __V850_ANNA_H__ */
diff --git a/include/asm-v850/as85ep1.h b/include/asm-v850/as85ep1.h
deleted file mode 100644
index 5a5ca9073d09..000000000000
--- a/include/asm-v850/as85ep1.h
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- * include/asm-v850/as85ep1.h -- AS85EP1 evaluation CPU chip/board
- *
- * Copyright (C) 2001,02,03 NEC Electronics Corporation
- * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_AS85EP1_H__
-#define __V850_AS85EP1_H__
-
-#include <asm/v850e.h>
-
-
-#define CPU_MODEL "as85ep1"
-#define CPU_MODEL_LONG "NEC V850E/AS85EP1"
-#define PLATFORM "AS85EP1"
-#define PLATFORM_LONG "NEC V850E/AS85EP1 evaluation board"
-
-#define CPU_CLOCK_FREQ 96000000 /* 96MHz */
-#define SYS_CLOCK_FREQ CPU_CLOCK_FREQ
-
-
-/* 1MB of static RAM. */
-#define SRAM_ADDR 0x00400000
-#define SRAM_SIZE 0x00100000 /* 1MB */
-/* About 58MB of DRAM. This can actually be at one of two positions,
- determined by jump JP3; we have to use the first position because the
- second is partially out of processor instruction addressing range
- (though in the second position there's actually 64MB available). */
-#define SDRAM_ADDR 0x00600000
-#define SDRAM_SIZE 0x039F8000 /* approx 58MB */
-
-/* For <asm/page.h> */
-#define PAGE_OFFSET SRAM_ADDR
-
-/* We use on-chip RAM, for a few miscellaneous variables that must be
- accessible using a load instruction relative to R0. The AS85EP1 chip
- 16K of internal RAM located slightly before I/O space. */
-#define R0_RAM_ADDR 0xFFFF8000
-
-
-/* AS85EP1 specific control registers. */
-#define AS85EP1_CSC_ADDR(n) (0xFFFFF060 + (n) * 2)
-#define AS85EP1_CSC(n) (*(volatile u16 *)AS85EP1_CSC_ADDR(n))
-#define AS85EP1_BSC_ADDR 0xFFFFF066
-#define AS85EP1_BSC (*(volatile u16 *)AS85EP1_BSC_ADDR)
-#define AS85EP1_BCT_ADDR(n) (0xFFFFF480 + (n) * 2)
-#define AS85EP1_BCT(n) (*(volatile u16 *)AS85EP1_BCT_ADDR(n))
-#define AS85EP1_DWC_ADDR(n) (0xFFFFF484 + (n) * 2)
-#define AS85EP1_DWC(n) (*(volatile u16 *)AS85EP1_DWC_ADDR(n))
-#define AS85EP1_BCC_ADDR 0xFFFFF488
-#define AS85EP1_BCC (*(volatile u16 *)AS85EP1_BCC_ADDR)
-#define AS85EP1_ASC_ADDR 0xFFFFF48A
-#define AS85EP1_ASC (*(volatile u16 *)AS85EP1_ASC_ADDR)
-#define AS85EP1_BCP_ADDR 0xFFFFF48C
-#define AS85EP1_BCP (*(volatile u16 *)AS85EP1_BCP_ADDR)
-#define AS85EP1_LBS_ADDR 0xFFFFF48E
-#define AS85EP1_LBS (*(volatile u16 *)AS85EP1_LBS_ADDR)
-#define AS85EP1_BMC_ADDR 0xFFFFF498
-#define AS85EP1_BMC (*(volatile u16 *)AS85EP1_BMC_ADDR)
-#define AS85EP1_PRC_ADDR 0xFFFFF49A
-#define AS85EP1_PRC (*(volatile u16 *)AS85EP1_PRC_ADDR)
-#define AS85EP1_SCR_ADDR(n) (0xFFFFF4A0 + (n) * 4)
-#define AS85EP1_SCR(n) (*(volatile u16 *)AS85EP1_SCR_ADDR(n))
-#define AS85EP1_RFS_ADDR(n) (0xFFFFF4A2 + (n) * 4)
-#define AS85EP1_RFS(n) (*(volatile u16 *)AS85EP1_RFS_ADDR(n))
-#define AS85EP1_IRAMM_ADDR 0xFFFFF80A
-#define AS85EP1_IRAMM (*(volatile u8 *)AS85EP1_IRAMM_ADDR)
-
-
-
-/* I/O port P0-P13. */
-/* Direct I/O. Bits 0-7 are pins Pn0-Pn7. */
-#define AS85EP1_PORT_IO_ADDR(n) (0xFFFFF400 + (n) * 2)
-#define AS85EP1_PORT_IO(n) (*(volatile u8 *)AS85EP1_PORT_IO_ADDR(n))
-/* Port mode (for direct I/O, 0 = output, 1 = input). */
-#define AS85EP1_PORT_PM_ADDR(n) (0xFFFFF420 + (n) * 2)
-#define AS85EP1_PORT_PM(n) (*(volatile u8 *)AS85EP1_PORT_PM_ADDR(n))
-/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode). */
-#define AS85EP1_PORT_PMC_ADDR(n) (0xFFFFF440 + (n) * 2)
-#define AS85EP1_PORT_PMC(n) (*(volatile u8 *)AS85EP1_PORT_PMC_ADDR(n))
-
-
-/* Hardware-specific interrupt numbers (in the kernel IRQ namespace). */
-#define IRQ_INTCCC(n) (0x0C + (n))
-#define IRQ_INTCCC_NUM 8
-#define IRQ_INTCMD(n) (0x14 + (n)) /* interval timer interrupts 0-5 */
-#define IRQ_INTCMD_NUM 6
-#define IRQ_INTSRE(n) (0x1E + (n)*3) /* UART 0-1 reception error */
-#define IRQ_INTSRE_NUM 2
-#define IRQ_INTSR(n) (0x1F + (n)*3) /* UART 0-1 reception completion */
-#define IRQ_INTSR_NUM 2
-#define IRQ_INTST(n) (0x20 + (n)*3) /* UART 0-1 transmission completion */
-#define IRQ_INTST_NUM 2
-
-#define NUM_CPU_IRQS 64
-
-#ifndef __ASSEMBLY__
-/* Initialize chip interrupts. */
-extern void as85ep1_init_irqs (void);
-#endif
-
-
-/* AS85EP1 UART details (basically the same as the V850E/MA1, but 2 channels). */
-#define V850E_UART_NUM_CHANNELS 2
-#define V850E_UART_BASE_FREQ (SYS_CLOCK_FREQ / 4)
-#define V850E_UART_CHIP_NAME "V850E/NA85E"
-
-/* This is a function that gets called before configuring the UART. */
-#define V850E_UART_PRE_CONFIGURE as85ep1_uart_pre_configure
-#ifndef __ASSEMBLY__
-extern void as85ep1_uart_pre_configure (unsigned chan,
- unsigned cflags, unsigned baud);
-#endif
-
-/* This board supports RTS/CTS for the on-chip UART, but only for channel 1. */
-
-/* CTS for UART channel 1 is pin P54 (bit 4 of port 5). */
-#define V850E_UART_CTS(chan) ((chan) == 1 ? !(AS85EP1_PORT_IO(5) & 0x10) : 1)
-/* RTS for UART channel 1 is pin P53 (bit 3 of port 5). */
-#define V850E_UART_SET_RTS(chan, val) \
- do { \
- if (chan == 1) { \
- unsigned old = AS85EP1_PORT_IO(5); \
- if (val) \
- AS85EP1_PORT_IO(5) = old & ~0x8; \
- else \
- AS85EP1_PORT_IO(5) = old | 0x8; \
- } \
- } while (0)
-
-
-/* Timer C details. */
-#define V850E_TIMER_C_BASE_ADDR 0xFFFFF600
-
-/* Timer D details (the AS85EP1 actually has 5 of these; should change later). */
-#define V850E_TIMER_D_BASE_ADDR 0xFFFFF540
-#define V850E_TIMER_D_TMD_BASE_ADDR (V850E_TIMER_D_BASE_ADDR + 0x0)
-#define V850E_TIMER_D_CMD_BASE_ADDR (V850E_TIMER_D_BASE_ADDR + 0x2)
-#define V850E_TIMER_D_TMCD_BASE_ADDR (V850E_TIMER_D_BASE_ADDR + 0x4)
-
-#define V850E_TIMER_D_BASE_FREQ SYS_CLOCK_FREQ
-#define V850E_TIMER_D_TMCD_CS_MIN 2 /* min 2^2 divider */
-
-
-#endif /* __V850_AS85EP1_H__ */
diff --git a/include/asm-v850/asm.h b/include/asm-v850/asm.h
deleted file mode 100644
index bf1e785a5dde..000000000000
--- a/include/asm-v850/asm.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * include/asm-v850/asm.h -- Macros for writing assembly code
- *
- * Copyright (C) 2001,02,03 NEC Electronics Corporation
- * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#define G_ENTRY(name) \
- .balign 4; \
- .globl name; \
- .type name,@function; \
- name
-#define G_DATA(name) \
- .globl name; \
- .type name,@object; \
- name
-#define END(name) \
- .size name,.-name
-
-#define L_ENTRY(name) \
- .balign 4; \
- .type name,@function; \
- name
-#define L_DATA(name) \
- .type name,@object; \
- name
diff --git a/include/asm-v850/atomic.h b/include/asm-v850/atomic.h
deleted file mode 100644
index e4e57de08f73..000000000000
--- a/include/asm-v850/atomic.h
+++ /dev/null
@@ -1,131 +0,0 @@
-/*
- * include/asm-v850/atomic.h -- Atomic operations
- *
- * Copyright (C) 2001,02 NEC Corporation
- * Copyright (C) 2001,02 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_ATOMIC_H__
-#define __V850_ATOMIC_H__
-
-
-#include <asm/system.h>
-
-#ifdef CONFIG_SMP
-#error SMP not supported
-#endif
-
-typedef struct { int counter; } atomic_t;
-
-#define ATOMIC_INIT(i) { (i) }
-
-#ifdef __KERNEL__
-
-#define atomic_read(v) ((v)->counter)
-#define atomic_set(v,i) (((v)->counter) = (i))
-
-static inline int atomic_add_return (int i, volatile atomic_t *v)
-{
- unsigned long flags;
- int res;
-
- local_irq_save (flags);
- res = v->counter + i;
- v->counter = res;
- local_irq_restore (flags);
-
- return res;
-}
-
-static __inline__ int atomic_sub_return (int i, volatile atomic_t *v)
-{
- unsigned long flags;
- int res;
-
- local_irq_save (flags);
- res = v->counter - i;
- v->counter = res;
- local_irq_restore (flags);
-
- return res;
-}
-
-static __inline__ void atomic_clear_mask (unsigned long mask, unsigned long *addr)
-{
- unsigned long flags;
-
- local_irq_save (flags);
- *addr &= ~mask;
- local_irq_restore (flags);
-}
-
-#endif
-
-#define atomic_add(i, v) atomic_add_return ((i), (v))
-#define atomic_sub(i, v) atomic_sub_return ((i), (v))
-
-#define atomic_dec_return(v) atomic_sub_return (1, (v))
-#define atomic_inc_return(v) atomic_add_return (1, (v))
-#define atomic_inc(v) atomic_inc_return (v)
-#define atomic_dec(v) atomic_dec_return (v)
-
-/*
- * atomic_inc_and_test - increment and test
- * @v: pointer of type atomic_t
- *
- * Atomically increments @v by 1
- * and returns true if the result is zero, or false for all
- * other cases.
- */
-#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0)
-
-#define atomic_sub_and_test(i,v) (atomic_sub_return ((i), (v)) == 0)
-#define atomic_dec_and_test(v) (atomic_sub_return (1, (v)) == 0)
-#define atomic_add_negative(i,v) (atomic_add_return ((i), (v)) < 0)
-
-static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
-{
- int ret;
- unsigned long flags;
-
- local_irq_save(flags);
- ret = v->counter;
- if (likely(ret == old))
- v->counter = new;
- local_irq_restore(flags);
-
- return ret;
-}
-
-#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
-
-static inline int atomic_add_unless(atomic_t *v, int a, int u)
-{
- int ret;
- unsigned long flags;
-
- local_irq_save(flags);
- ret = v->counter;
- if (ret != u)
- v->counter += a;
- local_irq_restore(flags);
-
- return ret != u;
-}
-
-#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
-
-/* Atomic operations are already serializing on ARM */
-#define smp_mb__before_atomic_dec() barrier()
-#define smp_mb__after_atomic_dec() barrier()
-#define smp_mb__before_atomic_inc() barrier()
-#define smp_mb__after_atomic_inc() barrier()
-
-#include <asm-generic/atomic.h>
-#endif /* __V850_ATOMIC_H__ */
diff --git a/include/asm-v850/auxvec.h b/include/asm-v850/auxvec.h
deleted file mode 100644
index f493232d0224..000000000000
--- a/include/asm-v850/auxvec.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef __V850_AUXVEC_H__
-#define __V850_AUXVEC_H__
-
-#endif /* __V850_AUXVEC_H__ */
diff --git a/include/asm-v850/bitops.h b/include/asm-v850/bitops.h
deleted file mode 100644
index f82f5b4a56e0..000000000000
--- a/include/asm-v850/bitops.h
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
- * include/asm-v850/bitops.h -- Bit operations
- *
- * Copyright (C) 2001,02,03,04,05 NEC Electronics Corporation
- * Copyright (C) 2001,02,03,04,05 Miles Bader <miles@gnu.org>
- * Copyright (C) 1992 Linus Torvalds.
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- */
-
-#ifndef __V850_BITOPS_H__
-#define __V850_BITOPS_H__
-
-#ifndef _LINUX_BITOPS_H
-#error only <linux/bitops.h> can be included directly
-#endif
-
-#include <linux/compiler.h> /* unlikely */
-#include <asm/byteorder.h> /* swab32 */
-#include <asm/system.h> /* interrupt enable/disable */
-
-
-#ifdef __KERNEL__
-
-#include <asm-generic/bitops/ffz.h>
-
-/*
- * The __ functions are not atomic
- */
-
-/* In the following constant-bit-op macros, a "g" constraint is used when
- we really need an integer ("i" constraint). This is to avoid
- warnings/errors from the compiler in the case where the associated
- operand _isn't_ an integer, and shouldn't produce bogus assembly because
- use of that form is protected by a guard statement that checks for
- constants, and should otherwise be removed by the optimizer. This
- _usually_ works -- however, __builtin_constant_p returns true for a
- variable with a known constant value too, and unfortunately gcc will
- happily put the variable in a register and use the register for the "g"
- constraint'd asm operand. To avoid the latter problem, we add a
- constant offset to the operand and subtract it back in the asm code;
- forcing gcc to do arithmetic on the value is usually enough to get it
- to use a real constant value. This is horrible, and ultimately
- unreliable too, but it seems to work for now (hopefully gcc will offer
- us more control in the future, so we can do a better job). */
-
-#define __const_bit_op(op, nr, addr) \
- ({ __asm__ (op " (%0 - 0x123), %1" \
- :: "g" (((nr) & 0x7) + 0x123), \
- "m" (*((char *)(addr) + ((nr) >> 3))) \
- : "memory"); })
-#define __var_bit_op(op, nr, addr) \
- ({ int __nr = (nr); \
- __asm__ (op " %0, [%1]" \
- :: "r" (__nr & 0x7), \
- "r" ((char *)(addr) + (__nr >> 3)) \
- : "memory"); })
-#define __bit_op(op, nr, addr) \
- ((__builtin_constant_p (nr) && (unsigned)(nr) <= 0x7FFFF) \
- ? __const_bit_op (op, nr, addr) \
- : __var_bit_op (op, nr, addr))
-
-#define __set_bit(nr, addr) __bit_op ("set1", nr, addr)
-#define __clear_bit(nr, addr) __bit_op ("clr1", nr, addr)
-#define __change_bit(nr, addr) __bit_op ("not1", nr, addr)
-
-/* The bit instructions used by `non-atomic' variants are actually atomic. */
-#define set_bit __set_bit
-#define clear_bit __clear_bit
-#define change_bit __change_bit
-
-
-#define __const_tns_bit_op(op, nr, addr) \
- ({ int __tns_res; \
- __asm__ __volatile__ ( \
- "tst1 (%1 - 0x123), %2; setf nz, %0; " op " (%1 - 0x123), %2" \
- : "=&r" (__tns_res) \
- : "g" (((nr) & 0x7) + 0x123), \
- "m" (*((char *)(addr) + ((nr) >> 3))) \
- : "memory"); \
- __tns_res; \
- })
-#define __var_tns_bit_op(op, nr, addr) \
- ({ int __nr = (nr); \
- int __tns_res; \
- __asm__ __volatile__ ( \
- "tst1 %1, [%2]; setf nz, %0; " op " %1, [%2]" \
- : "=&r" (__tns_res) \
- : "r" (__nr & 0x7), \
- "r" ((char *)(addr) + (__nr >> 3)) \
- : "memory"); \
- __tns_res; \
- })
-#define __tns_bit_op(op, nr, addr) \
- ((__builtin_constant_p (nr) && (unsigned)(nr) <= 0x7FFFF) \
- ? __const_tns_bit_op (op, nr, addr) \
- : __var_tns_bit_op (op, nr, addr))
-#define __tns_atomic_bit_op(op, nr, addr) \
- ({ int __tns_atomic_res, __tns_atomic_flags; \
- local_irq_save (__tns_atomic_flags); \
- __tns_atomic_res = __tns_bit_op (op, nr, addr); \
- local_irq_restore (__tns_atomic_flags); \
- __tns_atomic_res; \
- })
-
-#define __test_and_set_bit(nr, addr) __tns_bit_op ("set1", nr, addr)
-#define test_and_set_bit(nr, addr) __tns_atomic_bit_op ("set1", nr, addr)
-
-#define __test_and_clear_bit(nr, addr) __tns_bit_op ("clr1", nr, addr)
-#define test_and_clear_bit(nr, addr) __tns_atomic_bit_op ("clr1", nr, addr)
-
-#define __test_and_change_bit(nr, addr) __tns_bit_op ("not1", nr, addr)
-#define test_and_change_bit(nr, addr) __tns_atomic_bit_op ("not1", nr, addr)
-
-
-#define __const_test_bit(nr, addr) \
- ({ int __test_bit_res; \
- __asm__ __volatile__ ("tst1 (%1 - 0x123), %2; setf nz, %0" \
- : "=r" (__test_bit_res) \
- : "g" (((nr) & 0x7) + 0x123), \
- "m" (*((const char *)(addr) + ((nr) >> 3)))); \
- __test_bit_res; \
- })
-static inline int __test_bit (int nr, const void *addr)
-{
- int res;
- __asm__ __volatile__ ("tst1 %1, [%2]; setf nz, %0"
- : "=r" (res)
- : "r" (nr & 0x7), "r" (addr + (nr >> 3)));
- return res;
-}
-#define test_bit(nr,addr) \
- ((__builtin_constant_p (nr) && (unsigned)(nr) <= 0x7FFFF) \
- ? __const_test_bit ((nr), (addr)) \
- : __test_bit ((nr), (addr)))
-
-
-/* clear_bit doesn't provide any barrier for the compiler. */
-#define smp_mb__before_clear_bit() barrier ()
-#define smp_mb__after_clear_bit() barrier ()
-
-#include <asm-generic/bitops/ffs.h>
-#include <asm-generic/bitops/fls.h>
-#include <asm-generic/bitops/fls64.h>
-#include <asm-generic/bitops/__ffs.h>
-#include <asm-generic/bitops/find.h>
-#include <asm-generic/bitops/sched.h>
-#include <asm-generic/bitops/hweight.h>
-#include <asm-generic/bitops/lock.h>
-
-#include <asm-generic/bitops/ext2-non-atomic.h>
-#define ext2_set_bit_atomic(l,n,a) test_and_set_bit(n,a)
-#define ext2_clear_bit_atomic(l,n,a) test_and_clear_bit(n,a)
-
-#include <asm-generic/bitops/minix.h>
-
-#endif /* __KERNEL__ */
-
-#endif /* __V850_BITOPS_H__ */
diff --git a/include/asm-v850/bug.h b/include/asm-v850/bug.h
deleted file mode 100644
index b0ed2d35f3e8..000000000000
--- a/include/asm-v850/bug.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * include/asm-v850/bug.h -- Bug reporting
- *
- * Copyright (C) 2003 NEC Electronics Corporation
- * Copyright (C) 2003 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_BUG_H__
-#define __V850_BUG_H__
-
-#ifdef CONFIG_BUG
-extern void __bug (void) __attribute__ ((noreturn));
-#define BUG() __bug()
-#define HAVE_ARCH_BUG
-#endif
-
-#include <asm-generic/bug.h>
-
-#endif /* __V850_BUG_H__ */
diff --git a/include/asm-v850/bugs.h b/include/asm-v850/bugs.h
deleted file mode 100644
index 71110a65c1d7..000000000000
--- a/include/asm-v850/bugs.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * include/asm-v850e/bugs.h
- *
- * Copyright (C) 1994 Linus Torvalds
- */
-
-/*
- * This is included by init/main.c to check for architecture-dependent bugs.
- *
- * Needs:
- * void check_bugs(void);
- */
-
-static void check_bugs(void)
-{
-}
diff --git a/include/asm-v850/byteorder.h b/include/asm-v850/byteorder.h
deleted file mode 100644
index a6f07530050e..000000000000
--- a/include/asm-v850/byteorder.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * include/asm-v850/byteorder.h -- Endian id and conversion ops
- *
- * Copyright (C) 2001 NEC Corporation
- * Copyright (C) 2001 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_BYTEORDER_H__
-#define __V850_BYTEORDER_H__
-
-#include <asm/types.h>
-#include <linux/compiler.h>
-
-#ifdef __GNUC__
-
-static __inline__ __attribute_const__ __u32 ___arch__swab32 (__u32 word)
-{
- __u32 res;
- __asm__ ("bsw %1, %0" : "=r" (res) : "r" (word));
- return res;
-}
-
-static __inline__ __attribute_const__ __u16 ___arch__swab16 (__u16 half_word)
-{
- __u16 res;
- __asm__ ("bsh %1, %0" : "=r" (res) : "r" (half_word));
- return res;
-}
-
-#define __arch__swab32(x) ___arch__swab32(x)
-#define __arch__swab16(x) ___arch__swab16(x)
-
-#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
-# define __BYTEORDER_HAS_U64__
-# define __SWAB_64_THRU_32__
-#endif
-
-#endif /* __GNUC__ */
-
-#include <linux/byteorder/little_endian.h>
-
-#endif /* __V850_BYTEORDER_H__ */
diff --git a/include/asm-v850/cache.h b/include/asm-v850/cache.h
deleted file mode 100644
index 8832c7ea3242..000000000000
--- a/include/asm-v850/cache.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * include/asm-v850/cache.h -- Cache operations
- *
- * Copyright (C) 2001,05 NEC Corporation
- * Copyright (C) 2001,05 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_CACHE_H__
-#define __V850_CACHE_H__
-
-/* All cache operations are machine-dependent. */
-#include <asm/machdep.h>
-
-#ifndef L1_CACHE_BYTES
-/* This processor has no cache, so just choose an arbitrary value. */
-#define L1_CACHE_BYTES 16
-#define L1_CACHE_SHIFT 4
-#endif
-
-#endif /* __V850_CACHE_H__ */
diff --git a/include/asm-v850/cacheflush.h b/include/asm-v850/cacheflush.h
deleted file mode 100644
index 9ece05a202ef..000000000000
--- a/include/asm-v850/cacheflush.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * include/asm-v850/cacheflush.h
- *
- * Copyright (C) 2001,02,03 NEC Electronics Corporation
- * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_CACHEFLUSH_H__
-#define __V850_CACHEFLUSH_H__
-
-/* Somebody depends on this; sigh... */
-#include <linux/mm.h>
-
-#include <asm/machdep.h>
-
-
-/* The following are all used by the kernel in ways that only affect
- systems with MMUs, so we don't need them. */
-#define flush_cache_all() ((void)0)
-#define flush_cache_mm(mm) ((void)0)
-#define flush_cache_dup_mm(mm) ((void)0)
-#define flush_cache_range(vma, start, end) ((void)0)
-#define flush_cache_page(vma, vmaddr, pfn) ((void)0)
-#define flush_dcache_page(page) ((void)0)
-#define flush_dcache_mmap_lock(mapping) ((void)0)
-#define flush_dcache_mmap_unlock(mapping) ((void)0)
-#define flush_cache_vmap(start, end) ((void)0)
-#define flush_cache_vunmap(start, end) ((void)0)
-
-#ifdef CONFIG_NO_CACHE
-
-/* Some systems have no cache at all, in which case we don't need these
- either. */
-#define flush_icache() ((void)0)
-#define flush_icache_range(start, end) ((void)0)
-#define flush_icache_page(vma,pg) ((void)0)
-#define flush_icache_user_range(vma,pg,adr,len) ((void)0)
-#define flush_cache_sigtramp(vaddr) ((void)0)
-
-#else /* !CONFIG_NO_CACHE */
-
-struct page;
-struct mm_struct;
-struct vm_area_struct;
-
-/* Otherwise, somebody had better define them. */
-extern void flush_icache (void);
-extern void flush_icache_range (unsigned long start, unsigned long end);
-extern void flush_icache_page (struct vm_area_struct *vma, struct page *page);
-extern void flush_icache_user_range (struct vm_area_struct *vma,
- struct page *page,
- unsigned long adr, int len);
-extern void flush_cache_sigtramp (unsigned long addr);
-
-#endif /* CONFIG_NO_CACHE */
-
-#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
-do { memcpy(dst, src, len); \
- flush_icache_user_range(vma, page, vaddr, len); \
-} while (0)
-#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
- memcpy(dst, src, len)
-
-#endif /* __V850_CACHEFLUSH_H__ */
diff --git a/include/asm-v850/checksum.h b/include/asm-v850/checksum.h
deleted file mode 100644
index d1dddd938262..000000000000
--- a/include/asm-v850/checksum.h
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * include/asm-v850/checksum.h -- Checksum ops
- *
- * Copyright (C) 2001,2005 NEC Corporation
- * Copyright (C) 2001,2005 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_CHECKSUM_H__
-#define __V850_CHECKSUM_H__
-
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * returns a 32-bit number suitable for feeding into itself
- * or csum_tcpudp_magic
- *
- * this function must be called with even lengths, except
- * for the last fragment, which may be odd
- *
- * it's best to have buff aligned on a 32-bit boundary
- */
-extern __wsum csum_partial(const void *buff, int len, __wsum sum);
-
-/*
- * the same as csum_partial, but copies from src while it
- * checksums
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-extern __wsum csum_partial_copy_nocheck(const void *src,
- void *dst, int len, __wsum sum);
-
-
-/*
- * the same as csum_partial_copy, but copies from user space.
- *
- * here even more important to align src and dst on a 32-bit (or even
- * better 64-bit) boundary
- */
-extern __wsum csum_partial_copy_from_user (const void *src,
- void *dst,
- int len, __wsum sum,
- int *csum_err);
-
-__sum16 ip_fast_csum(const void *iph, unsigned int ihl);
-
-/*
- * Fold a partial checksum
- */
-static inline __sum16 csum_fold (__wsum sum)
-{
- unsigned int result;
- /*
- %0 %1
- hsw %1, %0 H L L H
- add %1, %0 H L H+L+C H+L
- */
- asm ("hsw %1, %0; add %1, %0" : "=&r" (result) : "r" (sum));
- return (__force __sum16)(~result >> 16);
-}
-
-
-/*
- * computes the checksum of the TCP/UDP pseudo-header
- * returns a 16-bit checksum, already complemented
- */
-static inline __wsum
-csum_tcpudp_nofold (__be32 saddr, __be32 daddr,
- unsigned short len,
- unsigned short proto, __wsum sum)
-{
- int __carry;
- __asm__ ("add %2, %0;"
- "setf c, %1;"
- "add %1, %0;"
- "add %3, %0;"
- "setf c, %1;"
- "add %1, %0;"
- "add %4, %0;"
- "setf c, %1;"
- "add %1, %0"
- : "=&r" (sum), "=&r" (__carry)
- : "r" (daddr), "r" (saddr),
- "r" ((len + proto) << 8),
- "0" (sum));
- return sum;
-}
-
-static inline __sum16
-csum_tcpudp_magic (__be32 saddr, __be32 daddr,
- unsigned short len,
- unsigned short proto, __wsum sum)
-{
- return csum_fold (csum_tcpudp_nofold (saddr, daddr, len, proto, sum));
-}
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-extern __sum16 ip_compute_csum(const void *buff, int len);
-
-
-#endif /* __V850_CHECKSUM_H__ */
diff --git a/include/asm-v850/clinkage.h b/include/asm-v850/clinkage.h
deleted file mode 100644
index c389691d6f86..000000000000
--- a/include/asm-v850/clinkage.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * include/asm-v850/clinkage.h -- Macros to reflect C symbol-naming conventions
- *
- * Copyright (C) 2001,02 NEC Corporatione
- * Copyright (C) 2001,02 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_CLINKAGE_H__
-#define __V850_CLINKAGE_H__
-
-#include <asm/macrology.h>
-#include <asm/asm.h>
-
-#define C_SYMBOL_NAME(name) macrology_paste(_, name)
-#define C_SYMBOL_STRING(name) macrology_stringify(C_SYMBOL_NAME(name))
-#define C_ENTRY(name) G_ENTRY(C_SYMBOL_NAME(name))
-#define C_DATA(name) G_DATA(C_SYMBOL_NAME(name))
-#define C_END(name) END(C_SYMBOL_NAME(name))
-
-#endif /* __V850_CLINKAGE_H__ */
diff --git a/include/asm-v850/cputime.h b/include/asm-v850/cputime.h
deleted file mode 100644
index 7c799c33b8a9..000000000000
--- a/include/asm-v850/cputime.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __V850_CPUTIME_H
-#define __V850_CPUTIME_H
-
-#include <asm-generic/cputime.h>
-
-#endif /* __V850_CPUTIME_H */
diff --git a/include/asm-v850/current.h b/include/asm-v850/current.h
deleted file mode 100644
index 30aae5673770..000000000000
--- a/include/asm-v850/current.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * include/asm-v850/current.h -- Current task
- *
- * Copyright (C) 2001,02 NEC Corporation
- * Copyright (C) 2001,02 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_CURRENT_H__
-#define __V850_CURRENT_H__
-
-#ifndef __ASSEMBLY__ /* <linux/thread_info.h> is not asm-safe. */
-#include <linux/thread_info.h>
-#endif
-
-#include <asm/macrology.h>
-
-
-/* Register used to hold the current task pointer while in the kernel.
- Any `call clobbered' register without a special meaning should be OK,
- but check asm/v850/kernel/entry.S to be sure. */
-#define CURRENT_TASK_REGNUM 16
-#define CURRENT_TASK macrology_paste (r, CURRENT_TASK_REGNUM)
-
-
-#ifdef __ASSEMBLY__
-
-/* Put a pointer to the current task structure into REG. */
-#define GET_CURRENT_TASK(reg) \
- GET_CURRENT_THREAD(reg); \
- ld.w TI_TASK[reg], reg
-
-#else /* !__ASSEMBLY__ */
-
-/* A pointer to the current task. */
-register struct task_struct *current \
- __asm__ (macrology_stringify (CURRENT_TASK));
-
-#endif /* __ASSEMBLY__ */
-
-
-#endif /* _V850_CURRENT_H */
diff --git a/include/asm-v850/delay.h b/include/asm-v850/delay.h
deleted file mode 100644
index 6d028e6b2354..000000000000
--- a/include/asm-v850/delay.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * include/asm-v850/delay.h -- Delay routines, using a pre-computed
- * "loops_per_second" value
- *
- * Copyright (C) 2001,03 NEC Corporation
- * Copyright (C) 2001,03 Miles Bader <miles@gnu.org>
- * Copyright (C) 1994 Hamish Macdonald
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- */
-
-#ifndef __V850_DELAY_H__
-#define __V850_DELAY_H__
-
-#include <asm/param.h>
-
-static inline void __delay(unsigned long loops)
-{
- if (loops)
- __asm__ __volatile__ ("1: add -1, %0; bnz 1b"
- : "=r" (loops) : "0" (loops));
-}
-
-/*
- * Use only for very small delays ( < 1 msec). Should probably use a
- * lookup table, really, as the multiplications take much too long with
- * short delays. This is a "reasonable" implementation, though (and the
- * first constant multiplications gets optimized away if the delay is
- * a constant)
- */
-
-extern unsigned long loops_per_jiffy;
-
-static inline void udelay(unsigned long usecs)
-{
- register unsigned long full_loops, part_loops;
-
- full_loops = ((usecs * HZ) / 1000000) * loops_per_jiffy;
- usecs %= (1000000 / HZ);
- part_loops = (usecs * HZ * loops_per_jiffy) / 1000000;
-
- __delay(full_loops + part_loops);
-}
-
-#endif /* __V850_DELAY_H__ */
diff --git a/include/asm-v850/device.h b/include/asm-v850/device.h
deleted file mode 100644
index d8f9872b0e2d..000000000000
--- a/include/asm-v850/device.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/*
- * Arch specific extensions to struct device
- *
- * This file is released under the GPLv2
- */
-#include <asm-generic/device.h>
-
diff --git a/include/asm-v850/div64.h b/include/asm-v850/div64.h
deleted file mode 100644
index 6cd978cefb28..000000000000
--- a/include/asm-v850/div64.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/div64.h>
diff --git a/include/asm-v850/dma-mapping.h b/include/asm-v850/dma-mapping.h
deleted file mode 100644
index 1cc42c603a1b..000000000000
--- a/include/asm-v850/dma-mapping.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef __V850_DMA_MAPPING_H__
-#define __V850_DMA_MAPPING_H__
-
-
-#ifdef CONFIG_PCI
-#include <asm-generic/dma-mapping.h>
-#else
-#include <asm-generic/dma-mapping-broken.h>
-#endif
-
-#endif /* __V850_DMA_MAPPING_H__ */
diff --git a/include/asm-v850/dma.h b/include/asm-v850/dma.h
deleted file mode 100644
index 2369849e2d0a..000000000000
--- a/include/asm-v850/dma.h
+++ /dev/null
@@ -1,18 +0,0 @@
-#ifndef __V850_DMA_H__
-#define __V850_DMA_H__
-
-/* What should this be? */
-#define MAX_DMA_ADDRESS 0xFFFFFFFF
-
-/* reserve a DMA channel */
-extern int request_dma (unsigned int dmanr, const char * device_id);
-/* release it again */
-extern void free_dma (unsigned int dmanr);
-
-#ifdef CONFIG_PCI
-extern int isa_dma_bridge_buggy;
-#else
-#define isa_dma_bridge_buggy (0)
-#endif
-
-#endif /* __V850_DMA_H__ */
diff --git a/include/asm-v850/elf.h b/include/asm-v850/elf.h
deleted file mode 100644
index 28f5b176ff1a..000000000000
--- a/include/asm-v850/elf.h
+++ /dev/null
@@ -1,99 +0,0 @@
-#ifndef __V850_ELF_H__
-#define __V850_ELF_H__
-
-/*
- * ELF register definitions..
- */
-
-#include <asm/ptrace.h>
-#include <asm/user.h>
-#include <asm/byteorder.h>
-
-typedef unsigned long elf_greg_t;
-
-#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t))
-typedef elf_greg_t elf_gregset_t[ELF_NGREG];
-
-typedef struct user_fpu_struct elf_fpregset_t;
-
-/*
- * This is used to ensure we don't load something for the wrong architecture.
- */
-#define elf_check_arch(x) \
- ((x)->e_machine == EM_V850 || (x)->e_machine == EM_CYGNUS_V850)
-
-
-/* v850 relocation types. */
-#define R_V850_NONE 0
-#define R_V850_9_PCREL 1
-#define R_V850_22_PCREL 2
-#define R_V850_HI16_S 3
-#define R_V850_HI16 4
-#define R_V850_LO16 5
-#define R_V850_32 6
-#define R_V850_16 7
-#define R_V850_8 8
-#define R_V850_SDA_16_16_OFFSET 9 /* For ld.b, st.b, set1, clr1,
- not1, tst1, movea, movhi */
-#define R_V850_SDA_15_16_OFFSET 10 /* For ld.w, ld.h, ld.hu, st.w, st.h */
-#define R_V850_ZDA_16_16_OFFSET 11 /* For ld.b, st.b, set1, clr1,
- not1, tst1, movea, movhi */
-#define R_V850_ZDA_15_16_OFFSET 12 /* For ld.w, ld.h, ld.hu, st.w, st.h */
-#define R_V850_TDA_6_8_OFFSET 13 /* For sst.w, sld.w */
-#define R_V850_TDA_7_8_OFFSET 14 /* For sst.h, sld.h */
-#define R_V850_TDA_7_7_OFFSET 15 /* For sst.b, sld.b */
-#define R_V850_TDA_16_16_OFFSET 16 /* For set1, clr1, not1, tst1,
- movea, movhi */
-#define R_V850_NUM 17
-
-
-/*
- * These are used to set parameters in the core dumps.
- */
-#define ELF_CLASS ELFCLASS32
-#ifdef __LITTLE_ENDIAN__
-#define ELF_DATA ELFDATA2LSB
-#else
-#define ELF_DATA ELFDATA2MSB
-#endif
-#define ELF_ARCH EM_V850
-
-#define USE_ELF_CORE_DUMP
-#define ELF_EXEC_PAGESIZE 4096
-
-
-#define ELF_CORE_COPY_REGS(_dest,_regs) \
- memcpy((char *) &_dest, (char *) _regs, \
- sizeof(struct pt_regs));
-
-/* This yields a mask that user programs can use to figure out what
- instruction set this CPU supports. This could be done in user space,
- but it's not easy, and we've already done it here. */
-
-#define ELF_HWCAP (0)
-
-/* This yields a string that ld.so will use to load implementation
- specific libraries for optimization. This is more specific in
- intent than poking at uname or /proc/cpuinfo.
-
- For the moment, we have only optimizations for the Intel generations,
- but that could change... */
-
-#define ELF_PLATFORM (NULL)
-
-#define ELF_PLAT_INIT(_r, load_addr) \
- do { \
- _r->gpr[0] = _r->gpr[1] = _r->gpr[2] = _r->gpr[3] = \
- _r->gpr[4] = _r->gpr[5] = _r->gpr[6] = _r->gpr[7] = \
- _r->gpr[8] = _r->gpr[9] = _r->gpr[10] = _r->gpr[11] = \
- _r->gpr[12] = _r->gpr[13] = _r->gpr[14] = _r->gpr[15] = \
- _r->gpr[16] = _r->gpr[17] = _r->gpr[18] = _r->gpr[19] = \
- _r->gpr[20] = _r->gpr[21] = _r->gpr[22] = _r->gpr[23] = \
- _r->gpr[24] = _r->gpr[25] = _r->gpr[26] = _r->gpr[27] = \
- _r->gpr[28] = _r->gpr[29] = _r->gpr[30] = _r->gpr[31] = \
- 0; \
- } while (0)
-
-#define SET_PERSONALITY(ex, ibcs2) set_personality(PER_LINUX_32BIT)
-
-#endif /* __V850_ELF_H__ */
diff --git a/include/asm-v850/emergency-restart.h b/include/asm-v850/emergency-restart.h
deleted file mode 100644
index 108d8c48e42e..000000000000
--- a/include/asm-v850/emergency-restart.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_EMERGENCY_RESTART_H
-#define _ASM_EMERGENCY_RESTART_H
-
-#include <asm-generic/emergency-restart.h>
-
-#endif /* _ASM_EMERGENCY_RESTART_H */
diff --git a/include/asm-v850/entry.h b/include/asm-v850/entry.h
deleted file mode 100644
index d9df8ac48584..000000000000
--- a/include/asm-v850/entry.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * include/asm-v850/entry.h -- Definitions used by low-level trap handlers
- *
- * Copyright (C) 2001,02,03 NEC Electronics Corporation
- * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_ENTRY_H__
-#define __V850_ENTRY_H__
-
-
-#include <asm/ptrace.h>
-#include <asm/machdep.h>
-
-
-/* These are special variables using by the kernel trap/interrupt code
- to save registers in, at a time when there are no spare registers we
- can use to do so, and we can't depend on the value of the stack
- pointer. This means that they must be within a signed 16-bit
- displacement of 0x00000000. */
-
-#define KERNEL_VAR_SPACE_ADDR R0_RAM_ADDR
-
-#ifdef __ASSEMBLY__
-#define KERNEL_VAR(addr) addr[r0]
-#else
-#define KERNEL_VAR(addr) (*(volatile unsigned long *)(addr))
-#endif
-
-/* Kernel stack pointer, 4 bytes. */
-#define KSP_ADDR (KERNEL_VAR_SPACE_ADDR + 0)
-#define KSP KERNEL_VAR (KSP_ADDR)
-/* 1 if in kernel-mode, 0 if in user mode, 1 byte. */
-#define KM_ADDR (KERNEL_VAR_SPACE_ADDR + 4)
-#define KM KERNEL_VAR (KM_ADDR)
-/* Temporary storage for interrupt handlers, 4 bytes. */
-#define INT_SCRATCH_ADDR (KERNEL_VAR_SPACE_ADDR + 8)
-#define INT_SCRATCH KERNEL_VAR (INT_SCRATCH_ADDR)
-/* Where the stack-pointer is saved when jumping to various sorts of
- interrupt handlers. ENTRY_SP is used by everything except NMIs,
- which have their own location. Higher-priority NMIs can clobber the
- value written by a lower priority NMI, since they can't be disabled,
- but that's OK, because only NMI0 (the lowest-priority one) is allowed
- to return. */
-#define ENTRY_SP_ADDR (KERNEL_VAR_SPACE_ADDR + 12)
-#define ENTRY_SP KERNEL_VAR (ENTRY_SP_ADDR)
-#define NMI_ENTRY_SP_ADDR (KERNEL_VAR_SPACE_ADDR + 16)
-#define NMI_ENTRY_SP KERNEL_VAR (NMI_ENTRY_SP_ADDR)
-
-#ifdef CONFIG_RESET_GUARD
-/* Used to detect unexpected resets (since the v850 has no MMU, any call
- through a null pointer will jump to the reset vector). We detect
- such resets by checking for a magic value, RESET_GUARD_ACTIVE, in
- this location. Properly resetting the machine stores zero there, so
- it shouldn't trigger the guard; the power-on value is uncertain, but
- it's unlikely to be RESET_GUARD_ACTIVE. */
-#define RESET_GUARD_ADDR (KERNEL_VAR_SPACE_ADDR + 28)
-#define RESET_GUARD KERNEL_VAR (RESET_GUARD_ADDR)
-#define RESET_GUARD_ACTIVE 0xFAB4BEEF
-#endif /* CONFIG_RESET_GUARD */
-
-#ifdef CONFIG_V850E_HIGHRES_TIMER
-#define HIGHRES_TIMER_SLOW_TICKS_ADDR (KERNEL_VAR_SPACE_ADDR + 32)
-#define HIGHRES_TIMER_SLOW_TICKS KERNEL_VAR (HIGHRES_TIMER_SLOW_TICKS_ADDR)
-#endif /* CONFIG_V850E_HIGHRES_TIMER */
-
-#ifndef __ASSEMBLY__
-
-#ifdef CONFIG_RESET_GUARD
-/* Turn off reset guard, so that resetting the machine works normally.
- This should be called in the various machine_halt, etc., functions. */
-static inline void disable_reset_guard (void)
-{
- RESET_GUARD = 0;
-}
-#endif /* CONFIG_RESET_GUARD */
-
-#endif /* !__ASSEMBLY__ */
-
-
-/* A `state save frame' is a struct pt_regs preceded by some extra space
- suitable for a function call stack frame. */
-
-/* Amount of room on the stack reserved for arguments and to satisfy the
- C calling conventions, in addition to the space used by the struct
- pt_regs that actually holds saved values. */
-#define STATE_SAVE_ARG_SPACE (6*4) /* Up to six arguments. */
-
-
-#ifdef __ASSEMBLY__
-
-/* The size of a state save frame. */
-#define STATE_SAVE_SIZE (PT_SIZE + STATE_SAVE_ARG_SPACE)
-
-#else /* !__ASSEMBLY__ */
-
-/* The size of a state save frame. */
-#define STATE_SAVE_SIZE (sizeof (struct pt_regs) + STATE_SAVE_ARG_SPACE)
-
-#endif /* __ASSEMBLY__ */
-
-
-/* Offset of the struct pt_regs in a state save frame. */
-#define STATE_SAVE_PT_OFFSET STATE_SAVE_ARG_SPACE
-
-
-#endif /* __V850_ENTRY_H__ */
diff --git a/include/asm-v850/errno.h b/include/asm-v850/errno.h
deleted file mode 100644
index 31c91df01205..000000000000
--- a/include/asm-v850/errno.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __V850_ERRNO_H__
-#define __V850_ERRNO_H__
-
-#include <asm-generic/errno.h>
-
-#endif /* __V850_ERRNO_H__ */
diff --git a/include/asm-v850/fb.h b/include/asm-v850/fb.h
deleted file mode 100644
index c7df38030992..000000000000
--- a/include/asm-v850/fb.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef _ASM_FB_H_
-#define _ASM_FB_H_
-#include <linux/fb.h>
-
-#define fb_pgprotect(...) do {} while (0)
-
-static inline int fb_is_primary_device(struct fb_info *info)
-{
- return 0;
-}
-
-#endif /* _ASM_FB_H_ */
diff --git a/include/asm-v850/fcntl.h b/include/asm-v850/fcntl.h
deleted file mode 100644
index 3af4d56776dd..000000000000
--- a/include/asm-v850/fcntl.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef __V850_FCNTL_H__
-#define __V850_FCNTL_H__
-
-#define O_DIRECTORY 040000 /* must be a directory */
-#define O_NOFOLLOW 0100000 /* don't follow links */
-#define O_DIRECT 0200000 /* direct disk access hint - currently ignored */
-#define O_LARGEFILE 0400000
-
-#include <asm-generic/fcntl.h>
-
-#endif /* __V850_FCNTL_H__ */
diff --git a/include/asm-v850/flat.h b/include/asm-v850/flat.h
deleted file mode 100644
index 17f0ea566611..000000000000
--- a/include/asm-v850/flat.h
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * include/asm-v850/flat.h -- uClinux flat-format executables
- *
- * Copyright (C) 2002,03 NEC Electronics Corporation
- * Copyright (C) 2002,03 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_FLAT_H__
-#define __V850_FLAT_H__
-
-/* The amount by which a relocation can exceed the program image limits
- without being regarded as an error. On the v850, the relocations of
- some base-pointers can be offset by 0x8000 (to allow better usage of the
- space offered by 16-bit signed offsets -- in most cases the offsets used
- with such a base-pointer will be negative). */
-
-#define flat_reloc_valid(reloc, size) ((reloc) <= (size + 0x8000))
-
-#define flat_stack_align(sp) /* nothing needed */
-#define flat_argvp_envp_on_stack() 0
-#define flat_old_ram_flag(flags) (flags)
-#define flat_set_persistent(relval, p) 0
-
-/* We store the type of relocation in the top 4 bits of the `relval.' */
-
-/* Convert a relocation entry into an address. */
-static inline unsigned long
-flat_get_relocate_addr (unsigned long relval)
-{
- return relval & 0x0fffffff; /* Mask out top 4-bits */
-}
-
-#define flat_v850_get_reloc_type(relval) ((relval) >> 28)
-
-#define FLAT_V850_R_32 0 /* Normal 32-bit reloc */
-#define FLAT_V850_R_HI16S_LO15 1 /* High 16-bits + signed 15-bit low field */
-#define FLAT_V850_R_HI16S_LO16 2 /* High 16-bits + signed 16-bit low field */
-
-/* Extract the address to be relocated from the symbol reference at RP;
- RELVAL is the raw relocation-table entry from which RP is derived.
- For the v850, RP should always be half-word aligned. */
-static inline unsigned long flat_get_addr_from_rp (unsigned long *rp,
- unsigned long relval,
- unsigned long flags,
- unsigned long *persistent)
-{
- short *srp = (short *)rp;
-
- switch (flat_v850_get_reloc_type (relval))
- {
- case FLAT_V850_R_32:
- /* Simple 32-bit address. */
- return srp[0] | (srp[1] << 16);
-
- case FLAT_V850_R_HI16S_LO16:
- /* The high and low halves of the address are in the 16
- bits at RP, and the 2nd word of the 32-bit instruction
- following that, respectively. The low half is _signed_
- so we have to sign-extend it and add it to the upper
- half instead of simply or-ing them together.
-
- Unlike most relocated address, this one is stored in
- native (little-endian) byte-order to avoid problems with
- trashing the low-order bit, so we have to convert to
- network-byte-order before returning, as that's what the
- caller expects. */
- return htonl ((srp[0] << 16) + srp[2]);
-
- case FLAT_V850_R_HI16S_LO15:
- /* The high and low halves of the address are in the 16
- bits at RP, and the upper 15 bits of the 2nd word of the
- 32-bit instruction following that, respectively. The
- low half is _signed_ so we have to sign-extend it and
- add it to the upper half instead of simply or-ing them
- together. The lowest bit is always zero.
-
- Unlike most relocated address, this one is stored in
- native (little-endian) byte-order to avoid problems with
- trashing the low-order bit, so we have to convert to
- network-byte-order before returning, as that's what the
- caller expects. */
- return htonl ((srp[0] << 16) + (srp[2] & ~0x1));
-
- default:
- return ~0; /* bogus value */
- }
-}
-
-/* Insert the address ADDR into the symbol reference at RP;
- RELVAL is the raw relocation-table entry from which RP is derived.
- For the v850, RP should always be half-word aligned. */
-static inline void flat_put_addr_at_rp (unsigned long *rp, unsigned long addr,
- unsigned long relval)
-{
- short *srp = (short *)rp;
-
- switch (flat_v850_get_reloc_type (relval)) {
- case FLAT_V850_R_32:
- /* Simple 32-bit address. */
- srp[0] = addr & 0xFFFF;
- srp[1] = (addr >> 16);
- break;
-
- case FLAT_V850_R_HI16S_LO16:
- /* The high and low halves of the address are in the 16
- bits at RP, and the 2nd word of the 32-bit instruction
- following that, respectively. The low half is _signed_
- so we must carry its sign bit to the upper half before
- writing the upper half. */
- srp[0] = (addr >> 16) + ((addr >> 15) & 0x1);
- srp[2] = addr & 0xFFFF;
- break;
-
- case FLAT_V850_R_HI16S_LO15:
- /* The high and low halves of the address are in the 16
- bits at RP, and the upper 15 bits of the 2nd word of the
- 32-bit instruction following that, respectively. The
- low half is _signed_ so we must carry its sign bit to
- the upper half before writing the upper half. The
- lowest bit we preserve from the existing instruction. */
- srp[0] = (addr >> 16) + ((addr >> 15) & 0x1);
- srp[2] = (addr & 0xFFFE) | (srp[2] & 0x1);
- break;
- }
-}
-
-#endif /* __V850_FLAT_H__ */
diff --git a/include/asm-v850/fpga85e2c.h b/include/asm-v850/fpga85e2c.h
deleted file mode 100644
index 23aae666c718..000000000000
--- a/include/asm-v850/fpga85e2c.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * include/asm-v850/fpga85e2c.h -- Machine-dependent defs for
- * FPGA implementation of V850E2/NA85E2C
- *
- * Copyright (C) 2002,03 NEC Electronics Corporation
- * Copyright (C) 2002,03 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_FPGA85E2C_H__
-#define __V850_FPGA85E2C_H__
-
-#include <asm/v850e2.h>
-#include <asm/clinkage.h>
-
-
-#define CPU_MODEL "v850e2/fpga85e2c"
-#define CPU_MODEL_LONG "NEC V850E2/NA85E2C"
-#define PLATFORM "fpga85e2c"
-#define PLATFORM_LONG "NA85E2C FPGA implementation"
-
-
-/* `external ram'. */
-#define ERAM_ADDR 0
-#define ERAM_SIZE 0x00100000 /* 1MB */
-
-
-/* FPGA specific control registers. */
-
-/* Writing a non-zero value to FLGREG(0) will signal the controlling CPU
- to stop execution. */
-#define FLGREG_ADDR(n) (0xFFE80100 + 2*(n))
-#define FLGREG(n) (*(volatile unsigned char *)FLGREG_ADDR (n))
-#define FLGREG_NUM 2
-
-#define CSDEV_ADDR(n) (0xFFE80110 + 2*(n))
-#define CSDEV(n) (*(volatile unsigned char *)CSDEV_ADDR (n))
-
-
-/* Timer interrupts 0-3, interrupt at intervals from CLK/4096 to CLK/16384. */
-#define IRQ_RPU(n) (60 + (n))
-#define IRQ_RPU_NUM 4
-
-/* For <asm/irq.h> */
-#define NUM_CPU_IRQS 64
-
-
-/* General-purpose timer. */
-/* control/status register (can only be read/written via bit insns) */
-#define RPU_GTMC_ADDR 0xFFFFFB00
-#define RPU_GTMC (*(volatile unsigned char *)RPU_GTMC_ADDR)
-#define RPU_GTMC_CE_BIT 7 /* clock enable (control) */
-#define RPU_GTMC_OV_BIT 6 /* overflow (status) */
-#define RPU_GTMC_CLK_BIT 1 /* 0 = .5 MHz CLK, 1 = 1 Mhz (control) */
-/* 32-bit count (8 least-significant bits are always zero). */
-#define RPU_GTM_ADDR 0xFFFFFB28
-#define RPU_GTM (*(volatile unsigned long *)RPU_GTMC_ADDR)
-
-
-/* For <asm/page.h> */
-#define PAGE_OFFSET ERAM_ADDR /* minimum allocatable address */
-
-
-/* For <asm/entry.h> */
-/* `R0 RAM', used for a few miscellaneous variables that must be accessible
- using a load instruction relative to R0. The FPGA implementation
- actually has no on-chip RAM, so we use part of main ram just after the
- interrupt vectors. */
-#ifdef __ASSEMBLY__
-#define R0_RAM_ADDR lo(C_SYMBOL_NAME(_r0_ram))
-#else
-extern char _r0_ram;
-#define R0_RAM_ADDR ((unsigned long)&_r0_ram);
-#endif
-
-
-#endif /* __V850_FPGA85E2C_H__ */
diff --git a/include/asm-v850/futex.h b/include/asm-v850/futex.h
deleted file mode 100644
index 6a332a9f099c..000000000000
--- a/include/asm-v850/futex.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _ASM_FUTEX_H
-#define _ASM_FUTEX_H
-
-#include <asm-generic/futex.h>
-
-#endif
diff --git a/include/asm-v850/gbus_int.h b/include/asm-v850/gbus_int.h
deleted file mode 100644
index 0c4bce753c7e..000000000000
--- a/include/asm-v850/gbus_int.h
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * include/asm-v850/gbus_int.h -- Midas labs GBUS interrupt support
- *
- * Copyright (C) 2001,02 NEC Corporation
- * Copyright (C) 2001,02 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_GBUS_INT_H__
-#define __V850_GBUS_INT_H__
-
-
-/* The GBUS interrupt interface has 32 interrupts shared among 4
- processor interrupts. The 32 GBUS interrupts are divided into two
- sets of 16 each, for allocating among control registers, etc (there
- are two of each control register, with bits 0-15 controlling an
- interrupt each). */
-
-/* The GBUS interrupts themselves. */
-#define IRQ_GBUS_INT(n) (GBUS_INT_BASE_IRQ + (n))
-#define IRQ_GBUS_INT_NUM 32
-
-/* Control registers. */
-#define GBUS_INT_STATUS_ADDR(w) (GBUS_INT_BASE_ADDR + (w)*0x40)
-#define GBUS_INT_STATUS(w) (*(volatile u16 *)GBUS_INT_STATUS_ADDR(w))
-#define GBUS_INT_CLEAR_ADDR(w) (GBUS_INT_BASE_ADDR + 0x10 + (w)*0x40)
-#define GBUS_INT_CLEAR(w) (*(volatile u16 *)GBUS_INT_CLEAR_ADDR(w))
-#define GBUS_INT_EDGE_ADDR(w) (GBUS_INT_BASE_ADDR + 0x20 + (w)*0x40)
-#define GBUS_INT_EDGE(w) (*(volatile u16 *)GBUS_INT_EDGE_ADDR(w))
-#define GBUS_INT_POLARITY_ADDR(w) (GBUS_INT_BASE_ADDR + 0x30 + (w)*0x40)
-#define GBUS_INT_POLARITY(w) (*(volatile u16 *)GBUS_INT_POLARITY_ADDR(w))
-/* This allows enabling interrupt bits in word W for interrupt GINTn. */
-#define GBUS_INT_ENABLE_ADDR(w, n) \
- (GBUS_INT_BASE_ADDR + 0x100 + (w)*0x10 + (n)*0x20)
-#define GBUS_INT_ENABLE(w, n) (*(volatile u16 *)GBUS_INT_ENABLE_ADDR(w, n))
-
-/* Mapping between kernel interrupt numbers and hardware control regs/bits. */
-#define GBUS_INT_BITS_PER_WORD 16
-#define GBUS_INT_NUM_WORDS (IRQ_GBUS_INT_NUM / GBUS_INT_BITS_PER_WORD)
-#define GBUS_INT_IRQ_WORD(irq) (((irq) - GBUS_INT_BASE_IRQ) >> 4)
-#define GBUS_INT_IRQ_BIT(irq) (((irq) - GBUS_INT_BASE_IRQ) & 0xF)
-#define GBUS_INT_IRQ_MASK(irq) (1 << GBUS_INT_IRQ_BIT(irq))
-
-
-/* Possible priorities for GBUS interrupts. */
-#define GBUS_INT_PRIORITY_HIGH 2
-#define GBUS_INT_PRIORITY_MEDIUM 4
-#define GBUS_INT_PRIORITY_LOW 6
-
-
-#ifndef __ASSEMBLY__
-
-/* Enable interrupt handling for interrupt IRQ. */
-extern void gbus_int_enable_irq (unsigned irq);
-/* Disable interrupt handling for interrupt IRQ. Note that any
- interrupts received while disabled will be delivered once the
- interrupt is enabled again, unless they are explicitly cleared using
- `gbus_int_clear_pending_irq'. */
-extern void gbus_int_disable_irq (unsigned irq);
-/* Return true if interrupt handling for interrupt IRQ is enabled. */
-extern int gbus_int_irq_enabled (unsigned irq);
-/* Disable all GBUS irqs. */
-extern void gbus_int_disable_irqs (void);
-/* Clear any pending interrupts for IRQ. */
-extern void gbus_int_clear_pending_irq (unsigned irq);
-/* Return true if interrupt IRQ is pending (but disabled). */
-extern int gbus_int_irq_pending (unsigned irq);
-
-
-struct gbus_int_irq_init {
- const char *name; /* name of interrupt type */
-
- /* Range of kernel irq numbers for this type:
- BASE, BASE+INTERVAL, ..., BASE+INTERVAL*NUM */
- unsigned base, num, interval;
-
- unsigned priority; /* interrupt priority to assign */
-};
-struct hw_interrupt_type; /* fwd decl */
-
-/* Initialize HW_IRQ_TYPES for GBUS irqs described in array
- INITS (which is terminated by an entry with the name field == 0). */
-extern void gbus_int_init_irq_types (struct gbus_int_irq_init *inits,
- struct hw_interrupt_type *hw_irq_types);
-
-/* Initialize GBUS interrupts. */
-extern void gbus_int_init_irqs (void);
-
-#endif /* !__ASSEMBLY__ */
-
-
-#endif /* __V850_GBUS_INT_H__ */
diff --git a/include/asm-v850/hardirq.h b/include/asm-v850/hardirq.h
deleted file mode 100644
index 04e20127c5af..000000000000
--- a/include/asm-v850/hardirq.h
+++ /dev/null
@@ -1,28 +0,0 @@
-#ifndef __V850_HARDIRQ_H__
-#define __V850_HARDIRQ_H__
-
-#include <linux/threads.h>
-#include <linux/cache.h>
-
-#include <asm/irq.h>
-
-typedef struct {
- unsigned int __softirq_pending;
-} ____cacheline_aligned irq_cpustat_t;
-
-#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */
-
-#define HARDIRQ_BITS 8
-
-/*
- * The hardirq mask has to be large enough to have
- * space for potentially all IRQ sources in the system
- * nesting on a single CPU:
- */
-#if (1 << HARDIRQ_BITS) < NR_IRQS
-# error HARDIRQ_BITS is too low!
-#endif
-
-void ack_bad_irq(unsigned int irq);
-
-#endif /* __V850_HARDIRQ_H__ */
diff --git a/include/asm-v850/highres_timer.h b/include/asm-v850/highres_timer.h
deleted file mode 100644
index 486fb49ceab6..000000000000
--- a/include/asm-v850/highres_timer.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * include/asm-v850/highres_timer.h -- High resolution timing routines
- *
- * Copyright (C) 2001,03 NEC Electronics Corporation
- * Copyright (C) 2001,03 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_HIGHRES_TIMER_H__
-#define __V850_HIGHRES_TIMER_H__
-
-#ifndef __ASSEMBLY__
-#include <linux/time.h>
-#endif
-
-#include <asm/entry.h>
-
-
-/* Frequency of the `slow ticks' (one tick each time the fast-tick
- counter overflows). */
-#define HIGHRES_TIMER_SLOW_TICK_RATE 25
-
-/* Which timer in the V850E `Timer D' we use. */
-#define HIGHRES_TIMER_TIMER_D_UNIT 3
-
-
-#ifndef __ASSEMBLY__
-
-extern void highres_timer_start (void), highres_timer_stop (void);
-extern void highres_timer_reset (void);
-extern void highres_timer_read_ticks (u32 *slow_ticks, u32 *fast_ticks);
-extern void highres_timer_ticks_to_timeval (u32 slow_ticks, u32 fast_ticks,
- struct timeval *tv);
-extern void highres_timer_read (struct timeval *tv);
-
-#endif /* !__ASSEMBLY__ */
-
-
-#endif /* __V850_HIGHRES_TIMER_H__ */
diff --git a/include/asm-v850/hw_irq.h b/include/asm-v850/hw_irq.h
deleted file mode 100644
index 043e94bb6bd8..000000000000
--- a/include/asm-v850/hw_irq.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef __V850_HW_IRQ_H__
-#define __V850_HW_IRQ_H__
-
-#endif /* __V850_HW_IRQ_H__ */
diff --git a/include/asm-v850/io.h b/include/asm-v850/io.h
deleted file mode 100644
index cdad251fba9f..000000000000
--- a/include/asm-v850/io.h
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
- * include/asm-v850/io.h -- Misc I/O operations
- *
- * Copyright (C) 2001,02,03,04,05 NEC Electronics Corporation
- * Copyright (C) 2001,02,03,04,05 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_IO_H__
-#define __V850_IO_H__
-
-#define IO_SPACE_LIMIT 0xFFFFFFFF
-
-#define readb(addr) \
- ({ unsigned char __v = (*(volatile unsigned char *) (addr)); __v; })
-#define readw(addr) \
- ({ unsigned short __v = (*(volatile unsigned short *) (addr)); __v; })
-#define readl(addr) \
- ({ unsigned long __v = (*(volatile unsigned long *) (addr)); __v; })
-
-#define readb_relaxed(a) readb(a)
-#define readw_relaxed(a) readw(a)
-#define readl_relaxed(a) readl(a)
-
-#define writeb(val, addr) \
- (void)((*(volatile unsigned char *) (addr)) = (val))
-#define writew(val, addr) \
- (void)((*(volatile unsigned short *) (addr)) = (val))
-#define writel(val, addr) \
- (void)((*(volatile unsigned int *) (addr)) = (val))
-
-#define __raw_readb readb
-#define __raw_readw readw
-#define __raw_readl readl
-#define __raw_writeb writeb
-#define __raw_writew writew
-#define __raw_writel writel
-
-#define inb(addr) readb (addr)
-#define inw(addr) readw (addr)
-#define inl(addr) readl (addr)
-#define outb(x, addr) ((void) writeb (x, addr))
-#define outw(x, addr) ((void) writew (x, addr))
-#define outl(x, addr) ((void) writel (x, addr))
-
-#define inb_p(port) inb((port))
-#define outb_p(val, port) outb((val), (port))
-#define inw_p(port) inw((port))
-#define outw_p(val, port) outw((val), (port))
-#define inl_p(port) inl((port))
-#define outl_p(val, port) outl((val), (port))
-
-static inline void insb (unsigned long port, void *dst, unsigned long count)
-{
- unsigned char *p = dst;
- while (count--)
- *p++ = inb (port);
-}
-static inline void insw (unsigned long port, void *dst, unsigned long count)
-{
- unsigned short *p = dst;
- while (count--)
- *p++ = inw (port);
-}
-static inline void insl (unsigned long port, void *dst, unsigned long count)
-{
- unsigned long *p = dst;
- while (count--)
- *p++ = inl (port);
-}
-
-static inline void
-outsb (unsigned long port, const void *src, unsigned long count)
-{
- const unsigned char *p = src;
- while (count--)
- outb (*p++, port);
-}
-static inline void
-outsw (unsigned long port, const void *src, unsigned long count)
-{
- const unsigned short *p = src;
- while (count--)
- outw (*p++, port);
-}
-static inline void
-outsl (unsigned long port, const void *src, unsigned long count)
-{
- const unsigned long *p = src;
- while (count--)
- outl (*p++, port);
-}
-
-
-/* Some places try to pass in an loff_t for PHYSADDR (?!), so we cast it to
- long before casting it to a pointer to avoid compiler warnings. */
-#define ioremap(physaddr, size) ((void __iomem *)(unsigned long)(physaddr))
-#define iounmap(addr) ((void)0)
-
-#define ioremap_nocache(physaddr, size) ioremap (physaddr, size)
-#define ioremap_writethrough(physaddr, size) ioremap (physaddr, size)
-#define ioremap_fullcache(physaddr, size) ioremap (physaddr, size)
-
-#define ioread8(addr) readb (addr)
-#define ioread16(addr) readw (addr)
-#define ioread32(addr) readl (addr)
-#define iowrite8(val, addr) writeb (val, addr)
-#define iowrite16(val, addr) writew (val, addr)
-#define iowrite32(val, addr) writel (val, addr)
-
-#define mmiowb()
-
-#define page_to_phys(page) ((page - mem_map) << PAGE_SHIFT)
-#if 0
-/* This is really stupid; don't define it. */
-#define page_to_bus(page) page_to_phys (page)
-#endif
-
-/* Conversion between virtual and physical mappings. */
-#define phys_to_virt(addr) ((void *)__phys_to_virt (addr))
-#define virt_to_phys(addr) ((unsigned long)__virt_to_phys (addr))
-
-#define memcpy_fromio(dst, src, len) memcpy (dst, (void *)src, len)
-#define memcpy_toio(dst, src, len) memcpy ((void *)dst, src, len)
-
-/*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p) __va(p)
-
-/*
- * Convert a virtual cached pointer to an uncached pointer
- */
-#define xlate_dev_kmem_ptr(p) p
-
-#endif /* __V850_IO_H__ */
diff --git a/include/asm-v850/ioctl.h b/include/asm-v850/ioctl.h
deleted file mode 100644
index b279fe06dfe5..000000000000
--- a/include/asm-v850/ioctl.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/ioctl.h>
diff --git a/include/asm-v850/ioctls.h b/include/asm-v850/ioctls.h
deleted file mode 100644
index 5313abd5f388..000000000000
--- a/include/asm-v850/ioctls.h
+++ /dev/null
@@ -1,84 +0,0 @@
-#ifndef __V850_IOCTLS_H__
-#define __V850_IOCTLS_H__
-
-#include <asm/ioctl.h>
-
-/* 0x54 is just a magic number to make these relatively unique ('T') */
-
-#define TCGETS 0x5401
-#define TCSETS 0x5402
-#define TCSETSW 0x5403
-#define TCSETSF 0x5404
-#define TCGETA 0x5405
-#define TCSETA 0x5406
-#define TCSETAW 0x5407
-#define TCSETAF 0x5408
-#define TCSBRK 0x5409
-#define TCXONC 0x540A
-#define TCFLSH 0x540B
-#define TIOCEXCL 0x540C
-#define TIOCNXCL 0x540D
-#define TIOCSCTTY 0x540E
-#define TIOCGPGRP 0x540F
-#define TIOCSPGRP 0x5410
-#define TIOCOUTQ 0x5411
-#define TIOCSTI 0x5412
-#define TIOCGWINSZ 0x5413
-#define TIOCSWINSZ 0x5414
-#define TIOCMGET 0x5415
-#define TIOCMBIS 0x5416
-#define TIOCMBIC 0x5417
-#define TIOCMSET 0x5418
-#define TIOCGSOFTCAR 0x5419
-#define TIOCSSOFTCAR 0x541A
-#define FIONREAD 0x541B
-#define TIOCINQ FIONREAD
-#define TIOCLINUX 0x541C
-#define TIOCCONS 0x541D
-#define TIOCGSERIAL 0x541E
-#define TIOCSSERIAL 0x541F
-#define TIOCPKT 0x5420
-#define FIONBIO 0x5421
-#define TIOCNOTTY 0x5422
-#define TIOCSETD 0x5423
-#define TIOCGETD 0x5424
-#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */
-#define TIOCSBRK 0x5427 /* BSD compatibility */
-#define TIOCCBRK 0x5428 /* BSD compatibility */
-#define TIOCGSID 0x5429 /* Return the session ID of FD */
-#define TCGETS2 _IOR('T',0x2A, struct termios2)
-#define TCSETS2 _IOW('T',0x2B, struct termios2)
-#define TCSETSW2 _IOW('T',0x2C, struct termios2)
-#define TCSETSF2 _IOW('T',0x2D, struct termios2)
-#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
-#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
-
-#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */
-#define FIOCLEX 0x5451
-#define FIOASYNC 0x5452
-#define TIOCSERCONFIG 0x5453
-#define TIOCSERGWILD 0x5454
-#define TIOCSERSWILD 0x5455
-#define TIOCGLCKTRMIOS 0x5456
-#define TIOCSLCKTRMIOS 0x5457
-#define TIOCSERGSTRUCT 0x5458 /* For debugging only */
-#define TIOCSERGETLSR 0x5459 /* Get line status register */
-#define TIOCSERGETMULTI 0x545A /* Get multiport config */
-#define TIOCSERSETMULTI 0x545B /* Set multiport config */
-
-#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */
-#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */
-#define FIOQSIZE 0x545E
-
-/* Used for packet mode */
-#define TIOCPKT_DATA 0
-#define TIOCPKT_FLUSHREAD 1
-#define TIOCPKT_FLUSHWRITE 2
-#define TIOCPKT_STOP 4
-#define TIOCPKT_START 8
-#define TIOCPKT_NOSTOP 16
-#define TIOCPKT_DOSTOP 32
-
-#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */
-
-#endif /* __V850_IOCTLS_H__ */
diff --git a/include/asm-v850/ipcbuf.h b/include/asm-v850/ipcbuf.h
deleted file mode 100644
index d8cbe9886d95..000000000000
--- a/include/asm-v850/ipcbuf.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef __V850E_IPCBUF_H__
-#define __V850E_IPCBUF_H__
-
-/*
- * The user_ipc_perm structure for v850e architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 32-bit mode_t and seq
- * - 2 miscellaneous 32-bit values
- */
-
-struct ipc64_perm
-{
- __kernel_key_t key;
- __kernel_uid32_t uid;
- __kernel_gid32_t gid;
- __kernel_uid32_t cuid;
- __kernel_gid32_t cgid;
- __kernel_mode_t mode;
- unsigned short __pad1;
- unsigned short seq;
- unsigned short __pad2;
- unsigned long __unused1;
- unsigned long __unused2;
-};
-
-#endif /* __V850E_IPCBUF_H__ */
diff --git a/include/asm-v850/irq.h b/include/asm-v850/irq.h
deleted file mode 100644
index 7d0d4cd1ce54..000000000000
--- a/include/asm-v850/irq.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * include/asm-v850/irq.h -- Machine interrupt handling
- *
- * Copyright (C) 2001,02,04 NEC Electronics Corporation
- * Copyright (C) 2001,02,04 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_IRQ_H__
-#define __V850_IRQ_H__
-
-#include <asm/machdep.h>
-
-/* Default NUM_MACH_IRQS. */
-#ifndef NUM_MACH_IRQS
-#define NUM_MACH_IRQS NUM_CPU_IRQS
-#endif
-
-/* NMIs have IRQ numbers from FIRST_NMI to FIRST_NMI+NUM_NMIS-1. */
-#define FIRST_NMI NUM_MACH_IRQS
-#define IRQ_NMI(n) (FIRST_NMI + (n))
-/* v850 processors have 3 non-maskable interrupts. */
-#define NUM_NMIS 3
-
-/* Includes both maskable and non-maskable irqs. */
-#define NR_IRQS (NUM_MACH_IRQS + NUM_NMIS)
-
-
-#ifndef __ASSEMBLY__
-
-struct pt_regs;
-struct hw_interrupt_type;
-struct irqaction;
-
-#define irq_canonicalize(irq) (irq)
-
-/* Initialize irq handling for IRQs.
- BASE_IRQ, BASE_IRQ+INTERVAL, ..., BASE_IRQ+NUM*INTERVAL
- to IRQ_TYPE. An IRQ_TYPE of 0 means to use a generic interrupt type. */
-extern void
-init_irq_handlers (int base_irq, int num, int interval,
- struct hw_interrupt_type *irq_type);
-
-/* Handle interrupt IRQ. REGS are the registers at the time of ther
- interrupt. */
-extern unsigned int handle_irq (int irq, struct pt_regs *regs);
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* __V850_IRQ_H__ */
diff --git a/include/asm-v850/irq_regs.h b/include/asm-v850/irq_regs.h
deleted file mode 100644
index 3dd9c0b70270..000000000000
--- a/include/asm-v850/irq_regs.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/irq_regs.h>
diff --git a/include/asm-v850/kdebug.h b/include/asm-v850/kdebug.h
deleted file mode 100644
index 6ece1b037665..000000000000
--- a/include/asm-v850/kdebug.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/kdebug.h>
diff --git a/include/asm-v850/kmap_types.h b/include/asm-v850/kmap_types.h
deleted file mode 100644
index 3288976b161f..000000000000
--- a/include/asm-v850/kmap_types.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef __V850_KMAP_TYPES_H__
-#define __V850_KMAP_TYPES_H__
-
-enum km_type {
- KM_BOUNCE_READ,
- KM_SKB_SUNRPC_DATA,
- KM_SKB_DATA_SOFTIRQ,
- KM_USER0,
- KM_USER1,
- KM_BIO_SRC_IRQ,
- KM_BIO_DST_IRQ,
- KM_PTE0,
- KM_PTE1,
- KM_IRQ0,
- KM_IRQ1,
- KM_TYPE_NR
-};
-
-#endif /* __V850_KMAP_TYPES_H__ */
diff --git a/include/asm-v850/kvm.h b/include/asm-v850/kvm.h
deleted file mode 100644
index 3f729b79febc..000000000000
--- a/include/asm-v850/kvm.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __LINUX_KVM_V850_H
-#define __LINUX_KVM_V850_H
-
-/* v850 does not support KVM */
-
-#endif
diff --git a/include/asm-v850/linkage.h b/include/asm-v850/linkage.h
deleted file mode 100644
index b6185d3cfe68..000000000000
--- a/include/asm-v850/linkage.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef __ASM_LINKAGE_H
-#define __ASM_LINKAGE_H
-
-#ifdef __ASSEMBLY__
-#include <asm/asm.h>
-#endif
-
-#endif
diff --git a/include/asm-v850/local.h b/include/asm-v850/local.h
deleted file mode 100644
index 705148abe276..000000000000
--- a/include/asm-v850/local.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __V850_LOCAL_H__
-#define __V850_LOCAL_H__
-
-#include <asm-generic/local.h>
-
-#endif /* __V850_LOCAL_H__ */
diff --git a/include/asm-v850/ma.h b/include/asm-v850/ma.h
deleted file mode 100644
index 89e66473a176..000000000000
--- a/include/asm-v850/ma.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * include/asm-v850/ma.h -- V850E/MA series of cpu chips
- *
- * Copyright (C) 2001,02,03 NEC Electronics Corporation
- * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_MA_H__
-#define __V850_MA_H__
-
-/* The MA series uses the V850E cpu core. */
-#include <asm/v850e.h>
-
-
-/* For <asm/entry.h> */
-/* We use on-chip RAM, for a few miscellaneous variables that must be
- accessible using a load instruction relative to R0. The amount
- varies between chip models, but there's always at least 4K, and it
- should always start at FFFFC000. */
-#define R0_RAM_ADDR 0xFFFFC000
-
-
-/* MA series UART details. */
-#define V850E_UART_BASE_FREQ CPU_CLOCK_FREQ
-
-/* This is a function that gets called before configuring the UART. */
-#define V850E_UART_PRE_CONFIGURE ma_uart_pre_configure
-#ifndef __ASSEMBLY__
-extern void ma_uart_pre_configure (unsigned chan,
- unsigned cflags, unsigned baud);
-#endif
-
-
-/* MA series timer C details. */
-#define V850E_TIMER_C_BASE_ADDR 0xFFFFF600
-
-
-/* MA series timer D details. */
-#define V850E_TIMER_D_BASE_ADDR 0xFFFFF540
-#define V850E_TIMER_D_TMD_BASE_ADDR (V850E_TIMER_D_BASE_ADDR + 0x0)
-#define V850E_TIMER_D_CMD_BASE_ADDR (V850E_TIMER_D_BASE_ADDR + 0x2)
-#define V850E_TIMER_D_TMCD_BASE_ADDR (V850E_TIMER_D_BASE_ADDR + 0x4)
-
-#define V850E_TIMER_D_BASE_FREQ CPU_CLOCK_FREQ
-
-
-/* Port 0 */
-/* Direct I/O. Bits 0-7 are pins P00-P07. */
-#define MA_PORT0_IO_ADDR 0xFFFFF400
-#define MA_PORT0_IO (*(volatile u8 *)MA_PORT0_IO_ADDR)
-/* Port mode (for direct I/O, 0 = output, 1 = input). */
-#define MA_PORT0_PM_ADDR 0xFFFFF420
-#define MA_PORT0_PM (*(volatile u8 *)MA_PORT0_PM_ADDR)
-/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode). */
-#define MA_PORT0_PMC_ADDR 0xFFFFF440
-#define MA_PORT0_PMC (*(volatile u8 *)MA_PORT0_PMC_ADDR)
-/* Port function control (for P04-P07, 0 = IRQ, 1 = DMARQ). */
-#define MA_PORT0_PFC_ADDR 0xFFFFF460
-#define MA_PORT0_PFC (*(volatile u8 *)MA_PORT0_PFC_ADDR)
-
-/* Port 1 */
-/* Direct I/O. Bits 0-3 are pins P10-P13. */
-#define MA_PORT1_IO_ADDR 0xFFFFF402
-#define MA_PORT1_IO (*(volatile u8 *)MA_PORT1_IO_ADDR)
-/* Port mode (for direct I/O, 0 = output, 1 = input). */
-#define MA_PORT1_PM_ADDR 0xFFFFF420
-#define MA_PORT1_PM (*(volatile u8 *)MA_PORT1_PM_ADDR)
-/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode). */
-#define MA_PORT1_PMC_ADDR 0xFFFFF442
-#define MA_PORT1_PMC (*(volatile u8 *)MA_PORT1_PMC_ADDR)
-
-/* Port 4 */
-/* Direct I/O. Bits 0-5 are pins P40-P45. */
-#define MA_PORT4_IO_ADDR 0xFFFFF408
-#define MA_PORT4_IO (*(volatile u8 *)MA_PORT4_IO_ADDR)
-/* Port mode (for direct I/O, 0 = output, 1 = input). */
-#define MA_PORT4_PM_ADDR 0xFFFFF428
-#define MA_PORT4_PM (*(volatile u8 *)MA_PORT4_PM_ADDR)
-/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode). */
-#define MA_PORT4_PMC_ADDR 0xFFFFF448
-#define MA_PORT4_PMC (*(volatile u8 *)MA_PORT4_PMC_ADDR)
-/* Port function control (for serial interfaces, 0 = CSI, 1 = UART). */
-#define MA_PORT4_PFC_ADDR 0xFFFFF468
-#define MA_PORT4_PFC (*(volatile u8 *)MA_PORT4_PFC_ADDR)
-
-
-#ifndef __ASSEMBLY__
-
-/* Initialize MA chip interrupts. */
-extern void ma_init_irqs (void);
-
-#endif /* !__ASSEMBLY__ */
-
-
-#endif /* __V850_MA_H__ */
diff --git a/include/asm-v850/ma1.h b/include/asm-v850/ma1.h
deleted file mode 100644
index ede1f1de2b7a..000000000000
--- a/include/asm-v850/ma1.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * include/asm-v850/ma1.h -- V850E/MA1 cpu chip
- *
- * Copyright (C) 2001,02,03 NEC Electronics Corporation
- * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_MA1_H__
-#define __V850_MA1_H__
-
-/* Inherit more generic details from MA series. */
-#include <asm/ma.h>
-
-
-#define CPU_MODEL "v850e/ma1"
-#define CPU_MODEL_LONG "NEC V850E/MA1"
-
-
-/* Hardware-specific interrupt numbers (in the kernel IRQ namespace). */
-#define IRQ_INTOV(n) (n) /* 0-3 */
-#define IRQ_INTOV_NUM 4
-#define IRQ_INTP(n) (0x4 + (n)) /* Pnnn (pin) interrupts */
-#define IRQ_INTP_NUM 24
-#define IRQ_INTCMD(n) (0x1c + (n)) /* interval timer interrupts 0-3 */
-#define IRQ_INTCMD_NUM 4
-#define IRQ_INTDMA(n) (0x20 + (n)) /* DMA interrupts 0-3 */
-#define IRQ_INTDMA_NUM 4
-#define IRQ_INTCSI(n) (0x24 + (n)*4)/* CSI 0-2 transmit/receive completion */
-#define IRQ_INTCSI_NUM 3
-#define IRQ_INTSER(n) (0x25 + (n)*4) /* UART 0-2 reception error */
-#define IRQ_INTSER_NUM 3
-#define IRQ_INTSR(n) (0x26 + (n)*4) /* UART 0-2 reception completion */
-#define IRQ_INTSR_NUM 3
-#define IRQ_INTST(n) (0x27 + (n)*4) /* UART 0-2 transmission completion */
-#define IRQ_INTST_NUM 3
-
-#define NUM_CPU_IRQS 0x30
-
-
-/* The MA1 has a UART with 3 channels. */
-#define V850E_UART_NUM_CHANNELS 3
-
-
-#endif /* __V850_MA1_H__ */
diff --git a/include/asm-v850/machdep.h b/include/asm-v850/machdep.h
deleted file mode 100644
index f1e3b8b91508..000000000000
--- a/include/asm-v850/machdep.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * include/asm-v850/machdep.h -- Machine-dependent definitions
- *
- * Copyright (C) 2001,02,03 NEC Electronics Corporation
- * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_MACHDEP_H__
-#define __V850_MACHDEP_H__
-
-
-/* chips */
-#ifdef CONFIG_V850E_MA1
-#include <asm/ma1.h>
-#endif
-#ifdef CONFIG_V850E_ME2
-#include <asm/me2.h>
-#endif
-#ifdef CONFIG_V850E_TEG
-#include <asm/teg.h>
-#endif
-
-/* These are both chips _and_ platforms, so put them in the middle... */
-#ifdef CONFIG_V850E2_ANNA
-#include <asm/anna.h>
-#endif
-#ifdef CONFIG_V850E_AS85EP1
-#include <asm/as85ep1.h>
-#endif
-
-/* platforms */
-#ifdef CONFIG_RTE_CB_MA1
-#include <asm/rte_ma1_cb.h>
-#endif
-#ifdef CONFIG_RTE_CB_ME2
-#include <asm/rte_me2_cb.h>
-#endif
-#ifdef CONFIG_RTE_CB_NB85E
-#include <asm/rte_nb85e_cb.h>
-#endif
-#ifdef CONFIG_V850E_SIM
-#include <asm/sim.h>
-#endif
-#ifdef CONFIG_V850E2_SIM85E2C
-#include <asm/sim85e2c.h>
-#endif
-#ifdef CONFIG_V850E2_SIM85E2S
-#include <asm/sim85e2s.h>
-#endif
-#ifdef CONFIG_V850E2_FPGA85E2C
-#include <asm/fpga85e2c.h>
-#endif
-
-#endif /* __V850_MACHDEP_H__ */
diff --git a/include/asm-v850/macrology.h b/include/asm-v850/macrology.h
deleted file mode 100644
index 37abf874832c..000000000000
--- a/include/asm-v850/macrology.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * include/asm-v850/macrology.h -- Various useful CPP macros
- *
- * Copyright (C) 2001 NEC Corporation
- * Copyright (C) 2001 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#define macrology_paste(arg1, arg2) macrology_paste_1(arg1, arg2)
-#define macrology_paste_1(arg1, arg2) arg1 ## arg2
-#define macrology_stringify(sym) macrology_stringify_1(sym)
-#define macrology_stringify_1(sym) #sym
diff --git a/include/asm-v850/me2.h b/include/asm-v850/me2.h
deleted file mode 100644
index ac7c9ce0bdc1..000000000000
--- a/include/asm-v850/me2.h
+++ /dev/null
@@ -1,182 +0,0 @@
-/*
- * include/asm-v850/me2.h -- V850E/ME2 cpu chip
- *
- * Copyright (C) 2001,02,03 NEC Electronics Corporation
- * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_ME2_H__
-#define __V850_ME2_H__
-
-#include <asm/v850e.h>
-#include <asm/v850e_cache.h>
-
-
-#define CPU_MODEL "v850e/me2"
-#define CPU_MODEL_LONG "NEC V850E/ME2"
-
-
-/* Hardware-specific interrupt numbers (in the kernel IRQ namespace). */
-#define IRQ_INTP(n) (n) /* Pnnn (pin) interrupts */
-#define IRQ_INTP_NUM 31
-#define IRQ_INTCMD(n) (0x31 + (n)) /* interval timer interrupts 0-3 */
-#define IRQ_INTCMD_NUM 4
-#define IRQ_INTDMA(n) (0x41 + (n)) /* DMA interrupts 0-3 */
-#define IRQ_INTDMA_NUM 4
-#define IRQ_INTUBTIRE(n) (0x49 + (n)*5)/* UARTB 0-1 reception error */
-#define IRQ_INTUBTIRE_NUM 2
-#define IRQ_INTUBTIR(n) (0x4a + (n)*5) /* UARTB 0-1 reception complete */
-#define IRQ_INTUBTIR_NUM 2
-#define IRQ_INTUBTIT(n) (0x4b + (n)*5) /* UARTB 0-1 transmission complete */
-#define IRQ_INTUBTIT_NUM 2
-#define IRQ_INTUBTIF(n) (0x4c + (n)*5) /* UARTB 0-1 FIFO trans. complete */
-#define IRQ_INTUBTIF_NUM 2
-#define IRQ_INTUBTITO(n) (0x4d + (n)*5) /* UARTB 0-1 reception timeout */
-#define IRQ_INTUBTITO_NUM 2
-
-/* For <asm/irq.h> */
-#define NUM_CPU_IRQS 0x59 /* V850E/ME2 */
-
-
-/* For <asm/entry.h> */
-/* We use on-chip RAM, for a few miscellaneous variables that must be
- accessible using a load instruction relative to R0. */
-#define R0_RAM_ADDR 0xFFFFB000 /* V850E/ME2 */
-
-
-/* V850E/ME2 UARTB details.*/
-#define V850E_UART_NUM_CHANNELS 2
-#define V850E_UARTB_BASE_FREQ (CPU_CLOCK_FREQ / 4)
-
-/* This is a function that gets called before configuring the UART. */
-#define V850E_UART_PRE_CONFIGURE me2_uart_pre_configure
-#ifndef __ASSEMBLY__
-extern void me2_uart_pre_configure (unsigned chan,
- unsigned cflags, unsigned baud);
-#endif /* __ASSEMBLY__ */
-
-
-/* V850E/ME2 timer C details. */
-#define V850E_TIMER_C_BASE_ADDR 0xFFFFF600
-
-
-/* V850E/ME2 timer D details. */
-#define V850E_TIMER_D_BASE_ADDR 0xFFFFF540
-#define V850E_TIMER_D_TMD_BASE_ADDR (V850E_TIMER_D_BASE_ADDR + 0x0)
-#define V850E_TIMER_D_CMD_BASE_ADDR (V850E_TIMER_D_BASE_ADDR + 0x2)
-#define V850E_TIMER_D_TMCD_BASE_ADDR (V850E_TIMER_D_BASE_ADDR + 0x4)
-
-#define V850E_TIMER_D_BASE_FREQ (CPU_CLOCK_FREQ / 2)
-
-
-/* Select iRAM mode. */
-#define ME2_IRAMM_ADDR 0xFFFFF80A
-#define ME2_IRAMM (*(volatile u8*)ME2_IRAMM_ADDR)
-
-
-/* Interrupt edge-detection configuration. INTF(n) and INTR(n) are only
- valid for n == 1, 2, or 5. */
-#define ME2_INTF_ADDR(n) (0xFFFFFC00 + (n) * 0x2)
-#define ME2_INTF(n) (*(volatile u8*)ME2_INTF_ADDR(n))
-#define ME2_INTR_ADDR(n) (0xFFFFFC20 + (n) * 0x2)
-#define ME2_INTR(n) (*(volatile u8*)ME2_INTR_ADDR(n))
-#define ME2_INTFAL_ADDR 0xFFFFFC10
-#define ME2_INTFAL (*(volatile u8*)ME2_INTFAL_ADDR)
-#define ME2_INTRAL_ADDR 0xFFFFFC30
-#define ME2_INTRAL (*(volatile u8*)ME2_INTRAL_ADDR)
-#define ME2_INTFDH_ADDR 0xFFFFFC16
-#define ME2_INTFDH (*(volatile u16*)ME2_INTFDH_ADDR)
-#define ME2_INTRDH_ADDR 0xFFFFFC36
-#define ME2_INTRDH (*(volatile u16*)ME2_INTRDH_ADDR)
-#define ME2_SESC_ADDR(n) (0xFFFFF609 + (n) * 0x10)
-#define ME2_SESC(n) (*(volatile u8*)ME2_SESC_ADDR(n))
-#define ME2_SESA10_ADDR 0xFFFFF5AD
-#define ME2_SESA10 (*(volatile u8*)ME2_SESA10_ADDR)
-#define ME2_SESA11_ADDR 0xFFFFF5DD
-#define ME2_SESA11 (*(volatile u8*)ME2_SESA11_ADDR)
-
-
-/* Port 1 */
-/* Direct I/O. Bits 0-3 are pins P10-P13. */
-#define ME2_PORT1_IO_ADDR 0xFFFFF402
-#define ME2_PORT1_IO (*(volatile u8 *)ME2_PORT1_IO_ADDR)
-/* Port mode (for direct I/O, 0 = output, 1 = input). */
-#define ME2_PORT1_PM_ADDR 0xFFFFF422
-#define ME2_PORT1_PM (*(volatile u8 *)ME2_PORT1_PM_ADDR)
-/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode). */
-#define ME2_PORT1_PMC_ADDR 0xFFFFF442
-#define ME2_PORT1_PMC (*(volatile u8 *)ME2_PORT1_PMC_ADDR)
-/* Port function control (for serial interfaces, 0 = CSI30, 1 = UARTB0 ). */
-#define ME2_PORT1_PFC_ADDR 0xFFFFF462
-#define ME2_PORT1_PFC (*(volatile u8 *)ME2_PORT1_PFC_ADDR)
-
-/* Port 2 */
-/* Direct I/O. Bits 0-3 are pins P20-P25. */
-#define ME2_PORT2_IO_ADDR 0xFFFFF404
-#define ME2_PORT2_IO (*(volatile u8 *)ME2_PORT2_IO_ADDR)
-/* Port mode (for direct I/O, 0 = output, 1 = input). */
-#define ME2_PORT2_PM_ADDR 0xFFFFF424
-#define ME2_PORT2_PM (*(volatile u8 *)ME2_PORT2_PM_ADDR)
-/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode). */
-#define ME2_PORT2_PMC_ADDR 0xFFFFF444
-#define ME2_PORT2_PMC (*(volatile u8 *)ME2_PORT2_PMC_ADDR)
-/* Port function control (for serial interfaces, 0 = INTP2x, 1 = UARTB1 ). */
-#define ME2_PORT2_PFC_ADDR 0xFFFFF464
-#define ME2_PORT2_PFC (*(volatile u8 *)ME2_PORT2_PFC_ADDR)
-
-/* Port 5 */
-/* Direct I/O. Bits 0-5 are pins P50-P55. */
-#define ME2_PORT5_IO_ADDR 0xFFFFF40A
-#define ME2_PORT5_IO (*(volatile u8 *)ME2_PORT5_IO_ADDR)
-/* Port mode (for direct I/O, 0 = output, 1 = input). */
-#define ME2_PORT5_PM_ADDR 0xFFFFF42A
-#define ME2_PORT5_PM (*(volatile u8 *)ME2_PORT5_PM_ADDR)
-/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode). */
-#define ME2_PORT5_PMC_ADDR 0xFFFFF44A
-#define ME2_PORT5_PMC (*(volatile u8 *)ME2_PORT5_PMC_ADDR)
-/* Port function control (). */
-#define ME2_PORT5_PFC_ADDR 0xFFFFF46A
-#define ME2_PORT5_PFC (*(volatile u8 *)ME2_PORT5_PFC_ADDR)
-
-/* Port 6 */
-/* Direct I/O. Bits 5-7 are pins P65-P67. */
-#define ME2_PORT6_IO_ADDR 0xFFFFF40C
-#define ME2_PORT6_IO (*(volatile u8 *)ME2_PORT6_IO_ADDR)
-/* Port mode (for direct I/O, 0 = output, 1 = input). */
-#define ME2_PORT6_PM_ADDR 0xFFFFF42C
-#define ME2_PORT6_PM (*(volatile u8 *)ME2_PORT6_PM_ADDR)
-/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode). */
-#define ME2_PORT6_PMC_ADDR 0xFFFFF44C
-#define ME2_PORT6_PMC (*(volatile u8 *)ME2_PORT6_PMC_ADDR)
-/* Port function control (). */
-#define ME2_PORT6_PFC_ADDR 0xFFFFF46C
-#define ME2_PORT6_PFC (*(volatile u8 *)ME2_PORT6_PFC_ADDR)
-
-/* Port 7 */
-/* Direct I/O. Bits 2-7 are pins P72-P77. */
-#define ME2_PORT7_IO_ADDR 0xFFFFF40E
-#define ME2_PORT7_IO (*(volatile u8 *)ME2_PORT7_IO_ADDR)
-/* Port mode (for direct I/O, 0 = output, 1 = input). */
-#define ME2_PORT7_PM_ADDR 0xFFFFF42E
-#define ME2_PORT7_PM (*(volatile u8 *)ME2_PORT7_PM_ADDR)
-/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode). */
-#define ME2_PORT7_PMC_ADDR 0xFFFFF44E
-#define ME2_PORT7_PMC (*(volatile u8 *)ME2_PORT7_PMC_ADDR)
-/* Port function control (). */
-#define ME2_PORT7_PFC_ADDR 0xFFFFF46E
-#define ME2_PORT7_PFC (*(volatile u8 *)ME2_PORT7_PFC_ADDR)
-
-
-#ifndef __ASSEMBLY__
-/* Initialize V850E/ME2 chip interrupts. */
-extern void me2_init_irqs (void);
-#endif /* !__ASSEMBLY__ */
-
-
-#endif /* __V850_ME2_H__ */
diff --git a/include/asm-v850/mman.h b/include/asm-v850/mman.h
deleted file mode 100644
index edbf6edbfb37..000000000000
--- a/include/asm-v850/mman.h
+++ /dev/null
@@ -1,15 +0,0 @@
-#ifndef __V850_MMAN_H__
-#define __V850_MMAN_H__
-
-#include <asm-generic/mman.h>
-
-#define MAP_GROWSDOWN 0x0100 /* stack-like segment */
-#define MAP_DENYWRITE 0x0800 /* ETXTBSY */
-#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */
-#define MAP_LOCKED 0x2000 /* pages are locked */
-#define MAP_NORESERVE 0x4000 /* don't check for reservations */
-
-#define MCL_CURRENT 1 /* lock all current mappings */
-#define MCL_FUTURE 2 /* lock all future mappings */
-
-#endif /* __V850_MMAN_H__ */
diff --git a/include/asm-v850/mmu.h b/include/asm-v850/mmu.h
deleted file mode 100644
index 267768c66ef6..000000000000
--- a/include/asm-v850/mmu.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/* Copyright (C) 2002, 2005, David McCullough <davidm@snapgear.com> */
-
-#ifndef __V850_MMU_H__
-#define __V850_MMU_H__
-
-typedef struct {
- struct vm_list_struct *vmlist;
- unsigned long end_brk;
-} mm_context_t;
-
-#endif /* __V850_MMU_H__ */
diff --git a/include/asm-v850/mmu_context.h b/include/asm-v850/mmu_context.h
deleted file mode 100644
index 01daacd5474e..000000000000
--- a/include/asm-v850/mmu_context.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __V850_MMU_CONTEXT_H__
-#define __V850_MMU_CONTEXT_H__
-
-#include <asm-generic/mm_hooks.h>
-
-#define destroy_context(mm) ((void)0)
-#define init_new_context(tsk,mm) 0
-#define switch_mm(prev,next,tsk) ((void)0)
-#define deactivate_mm(tsk,mm) do { } while (0)
-#define activate_mm(prev,next) ((void)0)
-#define enter_lazy_tlb(mm,tsk) ((void)0)
-
-#endif /* __V850_MMU_CONTEXT_H__ */
diff --git a/include/asm-v850/module.h b/include/asm-v850/module.h
deleted file mode 100644
index 2c2f4944f09f..000000000000
--- a/include/asm-v850/module.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * include/asm-v850/module.h -- Architecture-specific module hooks
- *
- * Copyright (C) 2001,02,03,04 NEC Corporation
- * Copyright (C) 2001,02,03,04 Miles Bader <miles@gnu.org>
- * Copyright (C) 2001,03 Rusty Russell
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- *
- * Derived in part from include/asm-ppc/module.h
- */
-
-#ifndef __V850_MODULE_H__
-#define __V850_MODULE_H__
-
-#define MODULE_SYMBOL_PREFIX "_"
-
-struct v850_plt_entry
-{
- /* Indirect jump instruction sequence (6-byte mov + 2-byte jr). */
- unsigned long tramp[2];
-};
-
-struct mod_arch_specific
-{
- /* Indices of PLT sections within module. */
- unsigned int core_plt_section, init_plt_section;
-};
-
-#define Elf_Shdr Elf32_Shdr
-#define Elf_Sym Elf32_Sym
-#define Elf_Ehdr Elf32_Ehdr
-
-/* Make empty sections for module_frob_arch_sections to expand. */
-#ifdef MODULE
-asm(".section .plt,\"ax\",@nobits; .align 3; .previous");
-asm(".section .init.plt,\"ax\",@nobits; .align 3; .previous");
-#endif
-
-/* We don't do exception tables. */
-struct exception_table_entry;
-static inline const struct exception_table_entry *
-search_extable(const struct exception_table_entry *first,
- const struct exception_table_entry *last,
- unsigned long value)
-{
- return 0;
-}
-#define ARCH_HAS_SEARCH_EXTABLE
-static inline void
-sort_extable(struct exception_table_entry *start,
- struct exception_table_entry *finish)
-{
- /* nada */
-}
-#define ARCH_HAS_SORT_EXTABLE
-
-#endif /* __V850_MODULE_H__ */
diff --git a/include/asm-v850/msgbuf.h b/include/asm-v850/msgbuf.h
deleted file mode 100644
index ed07dbd01637..000000000000
--- a/include/asm-v850/msgbuf.h
+++ /dev/null
@@ -1,31 +0,0 @@
-#ifndef __V850_MSGBUF_H__
-#define __V850_MSGBUF_H__
-
-/*
- * The msqid64_ds structure for v850 architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct msqid64_ds {
- struct ipc64_perm msg_perm;
- __kernel_time_t msg_stime; /* last msgsnd time */
- unsigned long __unused1;
- __kernel_time_t msg_rtime; /* last msgrcv time */
- unsigned long __unused2;
- __kernel_time_t msg_ctime; /* last change time */
- unsigned long __unused3;
- unsigned long msg_cbytes; /* current number of bytes on queue */
- unsigned long msg_qnum; /* number of messages in queue */
- unsigned long msg_qbytes; /* max number of bytes on queue */
- __kernel_pid_t msg_lspid; /* pid of last msgsnd */
- __kernel_pid_t msg_lrpid; /* last receive pid */
- unsigned long __unused4;
- unsigned long __unused5;
-};
-
-#endif /* __V850_MSGBUF_H__ */
diff --git a/include/asm-v850/mutex.h b/include/asm-v850/mutex.h
deleted file mode 100644
index 458c1f7fbc18..000000000000
--- a/include/asm-v850/mutex.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * Pull in the generic implementation for the mutex fastpath.
- *
- * TODO: implement optimized primitives instead, or leave the generic
- * implementation in place, or pick the atomic_xchg() based generic
- * implementation. (see asm-generic/mutex-xchg.h for details)
- */
-
-#include <asm-generic/mutex-dec.h>
diff --git a/include/asm-v850/namei.h b/include/asm-v850/namei.h
deleted file mode 100644
index ee8339b23843..000000000000
--- a/include/asm-v850/namei.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * linux/include/asm-v850/namei.h
- *
- * Included from linux/fs/namei.c
- */
-
-#ifndef __V850_NAMEI_H__
-#define __V850_NAMEI_H__
-
-/* This dummy routine maybe changed to something useful
- * for /usr/gnemul/ emulation stuff.
- * Look at asm-sparc/namei.h for details.
- */
-
-#define __emul_prefix() NULL
-
-#endif /* __V850_NAMEI_H__ */
diff --git a/include/asm-v850/page.h b/include/asm-v850/page.h
deleted file mode 100644
index 74a539a9bd59..000000000000
--- a/include/asm-v850/page.h
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * include/asm-v850/page.h -- VM ops
- *
- * Copyright (C) 2001,02,03,05 NEC Electronics Corporation
- * Copyright (C) 2001,02,03,05 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_PAGE_H__
-#define __V850_PAGE_H__
-
-#include <asm/machdep.h>
-
-
-#define PAGE_SHIFT 12
-#define PAGE_SIZE (1UL << PAGE_SHIFT)
-#define PAGE_MASK (~(PAGE_SIZE-1))
-
-
-/*
- * PAGE_OFFSET -- the first address of the first page of memory. For archs with
- * no MMU this corresponds to the first free page in physical memory (aligned
- * on a page boundary).
- */
-#ifndef PAGE_OFFSET
-#define PAGE_OFFSET 0x0000000
-#endif
-
-
-#ifndef __ASSEMBLY__
-
-#define STRICT_MM_TYPECHECKS
-
-#define clear_page(page) memset ((void *)(page), 0, PAGE_SIZE)
-#define copy_page(to, from) memcpy ((void *)(to), (void *)from, PAGE_SIZE)
-
-#define clear_user_page(addr, vaddr, page) \
- do { clear_page(addr); \
- flush_dcache_page(page); \
- } while (0)
-#define copy_user_page(to, from, vaddr, page) \
- do { copy_page(to, from); \
- flush_dcache_page(page); \
- } while (0)
-
-#ifdef STRICT_MM_TYPECHECKS
-/*
- * These are used to make use of C type-checking..
- */
-
-typedef struct { unsigned long pte; } pte_t;
-typedef struct { unsigned long pmd; } pmd_t;
-typedef struct { unsigned long pgd; } pgd_t;
-typedef struct { unsigned long pgprot; } pgprot_t;
-typedef struct page *pgtable_t;
-
-#define pte_val(x) ((x).pte)
-#define pmd_val(x) ((x).pmd)
-#define pgd_val(x) ((x).pgd)
-#define pgprot_val(x) ((x).pgprot)
-
-#define __pte(x) ((pte_t) { (x) } )
-#define __pmd(x) ((pmd_t) { (x) } )
-#define __pgd(x) ((pgd_t) { (x) } )
-#define __pgprot(x) ((pgprot_t) { (x) } )
-
-#else /* !STRICT_MM_TYPECHECKS */
-/*
- * .. while these make it easier on the compiler
- */
-
-typedef unsigned long pte_t;
-typedef unsigned long pmd_t;
-typedef unsigned long pgd_t;
-typedef unsigned long pgprot_t;
-
-#define pte_val(x) (x)
-#define pmd_val(x) (x)
-#define pgd_val(x) (x)
-#define pgprot_val(x) (x)
-
-#define __pte(x) (x)
-#define __pmd(x) (x)
-#define __pgd(x) (x)
-#define __pgprot(x) (x)
-
-#endif /* STRICT_MM_TYPECHECKS */
-
-#endif /* !__ASSEMBLY__ */
-
-
-/* to align the pointer to the (next) page boundary */
-#define PAGE_ALIGN(addr) (((addr) + PAGE_SIZE - 1) & PAGE_MASK)
-
-
-/* No current v850 processor has virtual memory. */
-#define __virt_to_phys(addr) (addr)
-#define __phys_to_virt(addr) (addr)
-
-#define virt_to_pfn(kaddr) (__virt_to_phys (kaddr) >> PAGE_SHIFT)
-#define pfn_to_virt(pfn) __phys_to_virt ((pfn) << PAGE_SHIFT)
-
-#define MAP_NR(kaddr) \
- (((unsigned long)(kaddr) - PAGE_OFFSET) >> PAGE_SHIFT)
-#define virt_to_page(kaddr) (mem_map + MAP_NR (kaddr))
-#define page_to_virt(page) \
- ((((page) - mem_map) << PAGE_SHIFT) + PAGE_OFFSET)
-
-#define ARCH_PFN_OFFSET (PAGE_OFFSET >> PAGE_SHIFT)
-#define pfn_valid(pfn) ((pfn) < max_mapnr)
-
-#define virt_addr_valid(kaddr) \
- (((void *)(kaddr) >= (void *)PAGE_OFFSET) && MAP_NR (kaddr) < max_mapnr)
-
-
-#define __pa(x) __virt_to_phys ((unsigned long)(x))
-#define __va(x) ((void *)__phys_to_virt ((unsigned long)(x)))
-
-
-#include <asm-generic/memory_model.h>
-#include <asm-generic/page.h>
-
-#endif /* __V850_PAGE_H__ */
diff --git a/include/asm-v850/param.h b/include/asm-v850/param.h
deleted file mode 100644
index 4391f5fe0204..000000000000
--- a/include/asm-v850/param.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * include/asm-v850/param.h -- Varions kernel parameters
- *
- * Copyright (C) 2001,02 NEC Corporation
- * Copyright (C) 2001,02 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_PARAM_H__
-#define __V850_PARAM_H__
-
-#define EXEC_PAGESIZE 4096
-
-#ifndef NOGROUP
-#define NOGROUP (-1)
-#endif
-
-#define MAXHOSTNAMELEN 64 /* max length of hostname */
-
-#ifdef __KERNEL__
-# define HZ CONFIG_HZ
-# define USER_HZ 100
-# define CLOCKS_PER_SEC USER_HZ
-#else
-# define HZ 100
-#endif
-
-#endif /* __V850_PARAM_H__ */
diff --git a/include/asm-v850/pci.h b/include/asm-v850/pci.h
deleted file mode 100644
index de2a7d0a81cc..000000000000
--- a/include/asm-v850/pci.h
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * include/asm-v850/pci.h -- PCI support
- *
- * Copyright (C) 2001,02,05 NEC Corporation
- * Copyright (C) 2001,02,05 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_PCI_H__
-#define __V850_PCI_H__
-
-/* Get any platform-dependent definitions. */
-#include <asm/machdep.h>
-
-#define pcibios_scan_all_fns(a, b) 0
-
-/* Generic declarations. */
-
-struct scatterlist;
-
-extern void pcibios_set_master (struct pci_dev *dev);
-
-/* `Grant' to PDEV the memory block at CPU_ADDR, for doing DMA. The
- 32-bit PCI bus mastering address to use is returned. the device owns
- this memory until either pci_unmap_single or pci_dma_sync_single_for_cpu is
- performed. */
-extern dma_addr_t
-pci_map_single (struct pci_dev *pdev, void *cpu_addr, size_t size, int dir);
-
-/* Return to the CPU the PCI DMA memory block previously `granted' to
- PDEV, at DMA_ADDR. */
-extern void
-pci_unmap_single (struct pci_dev *pdev, dma_addr_t dma_addr, size_t size,
- int dir);
-
-/* Make physical memory consistent for a single streaming mode DMA
- translation after a transfer.
-
- If you perform a pci_map_single() but wish to interrogate the
- buffer using the cpu, yet do not wish to teardown the PCI dma
- mapping, you must call this function before doing so. At the next
- point you give the PCI dma address back to the card, you must first
- perform a pci_dma_sync_for_device, and then the device again owns
- the buffer. */
-extern void
-pci_dma_sync_single_for_cpu (struct pci_dev *dev, dma_addr_t dma_addr,
- size_t size, int dir);
-
-extern void
-pci_dma_sync_single_for_device (struct pci_dev *dev, dma_addr_t dma_addr,
- size_t size, int dir);
-
-
-/* Do multiple DMA mappings at once. */
-extern int
-pci_map_sg (struct pci_dev *pdev, struct scatterlist *sg, int sg_len, int dir);
-
-/* Unmap multiple DMA mappings at once. */
-extern void
-pci_unmap_sg (struct pci_dev *pdev, struct scatterlist *sg, int sg_len,
- int dir);
-
-/* SG-list versions of pci_dma_sync functions. */
-extern void
-pci_dma_sync_sg_for_cpu (struct pci_dev *dev,
- struct scatterlist *sg, int sg_len,
- int dir);
-extern void
-pci_dma_sync_sg_for_device (struct pci_dev *dev,
- struct scatterlist *sg, int sg_len,
- int dir);
-
-#define pci_map_page(dev, page, offs, size, dir) \
- pci_map_single(dev, (page_address(page) + (offs)), size, dir)
-#define pci_unmap_page(dev,addr,sz,dir) \
- pci_unmap_single(dev, addr, sz, dir)
-
-/* Test for pci_map_single or pci_map_page having generated an error. */
-static inline int
-pci_dma_mapping_error (dma_addr_t dma_addr)
-{
- return dma_addr == 0;
-}
-
-/* Allocate and map kernel buffer using consistent mode DMA for PCI
- device. Returns non-NULL cpu-view pointer to the buffer if
- successful and sets *DMA_ADDR to the pci side dma address as well,
- else DMA_ADDR is undefined. */
-extern void *
-pci_alloc_consistent (struct pci_dev *pdev, size_t size, dma_addr_t *dma_addr);
-
-/* Free and unmap a consistent DMA buffer. CPU_ADDR and DMA_ADDR must
- be values that were returned from pci_alloc_consistent. SIZE must be
- the same as what as passed into pci_alloc_consistent. References to
- the memory and mappings assosciated with CPU_ADDR or DMA_ADDR past
- this call are illegal. */
-extern void
-pci_free_consistent (struct pci_dev *pdev, size_t size, void *cpu_addr,
- dma_addr_t dma_addr);
-
-#ifdef CONFIG_PCI
-static inline void pci_dma_burst_advice(struct pci_dev *pdev,
- enum pci_dma_burst_strategy *strat,
- unsigned long *strategy_parameter)
-{
- *strat = PCI_DMA_BURST_INFINITY;
- *strategy_parameter = ~0UL;
-}
-#endif
-
-extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
-extern void pci_iounmap (struct pci_dev *dev, void __iomem *addr);
-
-#endif /* __V850_PCI_H__ */
diff --git a/include/asm-v850/percpu.h b/include/asm-v850/percpu.h
deleted file mode 100644
index 755ac6522b63..000000000000
--- a/include/asm-v850/percpu.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef __V850_PERCPU_H__
-#define __V850_PERCPU_H__
-
-#include <asm-generic/percpu.h>
-
-/* This is a stupid hack to satisfy some grotty implicit include-file
- dependency; basically, <linux/smp.h> uses BUG_ON, which calls BUG, but
- doesn't include the necessary headers to define it. In the twisted
- festering mess of includes this must all be resolved somehow on other
- platforms, but I haven't the faintest idea how, and don't care; here will
- do, even though doesn't actually make any sense. */
-#include <asm/page.h>
-
-#endif /* __V850_PERCPU_H__ */
diff --git a/include/asm-v850/pgalloc.h b/include/asm-v850/pgalloc.h
deleted file mode 100644
index b91eb2d02bfd..000000000000
--- a/include/asm-v850/pgalloc.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * include/asm-v850/pgalloc.h
- *
- * Copyright (C) 2001,02 NEC Corporation
- * Copyright (C) 2001,02 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_PGALLOC_H__
-#define __V850_PGALLOC_H__
-
-#include <linux/mm.h> /* some crap code expects this */
-
-/* ... and then, there was one. */
-#define check_pgt_cache() ((void)0)
-
-#endif /* __V850_PGALLOC_H__ */
diff --git a/include/asm-v850/pgtable.h b/include/asm-v850/pgtable.h
deleted file mode 100644
index 1ea2a900f0f8..000000000000
--- a/include/asm-v850/pgtable.h
+++ /dev/null
@@ -1,59 +0,0 @@
-#ifndef __V850_PGTABLE_H__
-#define __V850_PGTABLE_H__
-
-#include <asm-generic/4level-fixup.h>
-
-#include <asm/page.h>
-
-
-#define pgd_present(pgd) (1) /* pages are always present on NO_MM */
-#define pgd_none(pgd) (0)
-#define pgd_bad(pgd) (0)
-#define pgd_clear(pgdp) ((void)0)
-
-#define pmd_offset(a, b) ((void *)0)
-
-#define kern_addr_valid(addr) (1)
-
-
-#define __swp_type(x) (0)
-#define __swp_offset(x) (0)
-#define __swp_entry(typ,off) ((swp_entry_t) { ((typ) | ((off) << 7)) })
-#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
-#define __swp_entry_to_pte(x) ((pte_t) { (x).val })
-
-static inline int pte_file (pte_t pte) { return 0; }
-
-
-/* These mean nothing to !CONFIG_MMU. */
-#define PAGE_NONE __pgprot(0)
-#define PAGE_SHARED __pgprot(0)
-#define PAGE_COPY __pgprot(0)
-#define PAGE_READONLY __pgprot(0)
-#define PAGE_KERNEL __pgprot(0)
-
-
-/*
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc. When CONFIG_MMU is not defined, this
- * should never actually be used, so just define it to something that's
- * will hopefully cause a bus error if it is.
- */
-#define ZERO_PAGE(vaddr) ((void *)0x87654321)
-
-
-/* Some bogus code in procfs uses these; whatever. */
-#define VMALLOC_START 0
-#define VMALLOC_END (~0)
-
-
-extern void paging_init (void);
-#define swapper_pg_dir ((pgd_t *) 0)
-
-#define pgtable_cache_init() ((void)0)
-
-
-extern unsigned int kobjsize(const void *objp);
-
-
-#endif /* __V850_PGTABLE_H__ */
diff --git a/include/asm-v850/poll.h b/include/asm-v850/poll.h
deleted file mode 100644
index 803cad0b9b59..000000000000
--- a/include/asm-v850/poll.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef __V850_POLL_H__
-#define __V850_POLL_H__
-
-#define POLLWRNORM POLLOUT
-#define POLLWRBAND 0x0100
-
-#include <asm-generic/poll.h>
-
-#endif /* __V850_POLL_H__ */
diff --git a/include/asm-v850/posix_types.h b/include/asm-v850/posix_types.h
deleted file mode 100644
index 7f403b765390..000000000000
--- a/include/asm-v850/posix_types.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * include/asm-v850/posix_types.h -- Kernel versions of standard types
- *
- * Copyright (C) 2001,02,03 NEC Electronics Corporation
- * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_POSIX_TYPES_H__
-#define __V850_POSIX_TYPES_H__
-
-typedef unsigned long __kernel_ino_t;
-typedef unsigned long long __kernel_ino64_t;
-typedef unsigned int __kernel_mode_t;
-typedef unsigned int __kernel_nlink_t;
-typedef long __kernel_off_t;
-typedef long long __kernel_loff_t;
-typedef int __kernel_pid_t;
-typedef unsigned short __kernel_ipc_pid_t;
-typedef unsigned int __kernel_uid_t;
-typedef unsigned int __kernel_gid_t;
-typedef unsigned int __kernel_size_t;
-typedef int __kernel_ssize_t;
-typedef int __kernel_ptrdiff_t;
-typedef long __kernel_time_t;
-typedef long __kernel_suseconds_t;
-typedef long __kernel_clock_t;
-typedef int __kernel_timer_t;
-typedef int __kernel_clockid_t;
-typedef int __kernel_daddr_t;
-typedef char * __kernel_caddr_t;
-typedef unsigned short __kernel_uid16_t;
-typedef unsigned short __kernel_gid16_t;
-typedef unsigned int __kernel_uid32_t;
-typedef unsigned int __kernel_gid32_t;
-
-/* Some bogus code depends on this; we don't care. */
-typedef __kernel_uid_t __kernel_old_uid_t;
-typedef unsigned int __kernel_old_dev_t;
-
-typedef struct {
- int val[2];
-} __kernel_fsid_t;
-
-
-#if defined(__KERNEL__)
-
-/* We used to include <asm/bitops.h> here, which seems the right thing, but
- it caused nasty include-file definition order problems. Removing the
- include seems to work, so fingers crossed... */
-
-#undef __FD_SET
-#define __FD_SET(fd, fd_set) \
- __set_bit (fd, (void *)&((__kernel_fd_set *)fd_set)->fds_bits)
-#undef __FD_CLR
-#define __FD_CLR(fd, fd_set) \
- __clear_bit (fd, (void *)&((__kernel_fd_set *)fd_set)->fds_bits)
-#undef __FD_ISSET
-#define __FD_ISSET(fd, fd_set) \
- __test_bit (fd, (void *)&((__kernel_fd_set *)fd_set)->fds_bits)
-#undef __FD_ZERO
-#define __FD_ZERO(fd_set) \
- memset (fd_set, 0, sizeof (*(fd_set *)fd_set))
-
-#endif /* defined(__KERNEL__) */
-
-#endif /* __V850_POSIX_TYPES_H__ */
diff --git a/include/asm-v850/processor.h b/include/asm-v850/processor.h
deleted file mode 100644
index 979e3467f9af..000000000000
--- a/include/asm-v850/processor.h
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * include/asm-v850/processor.h
- *
- * Copyright (C) 2001,02,03 NEC Electronics Corporation
- * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_PROCESSOR_H__
-#define __V850_PROCESSOR_H__
-
-#ifndef __ASSEMBLY__ /* <linux/thread_info.h> is not asm-safe. */
-#include <linux/thread_info.h>
-#endif
-
-#include <linux/compiler.h>
-#include <asm/ptrace.h>
-#include <asm/entry.h>
-
-/* Some code expects `segment' stuff to be defined here. */
-#include <asm/segment.h>
-
-
-/*
- * The only places this is used seem to be horrible bletcherous kludges,
- * so we just define it to be as large as possible.
- */
-#define TASK_SIZE (0xFFFFFFFF)
-
-/*
- * This decides where the kernel will search for a free chunk of vm
- * space during mmap's. We won't be using it.
- */
-#define TASK_UNMAPPED_BASE 0
-
-
-#ifndef __ASSEMBLY__
-
-
-/*
- * Default implementation of macro that returns current
- * instruction pointer ("program counter").
- */
-#define current_text_addr() ({ __label__ _l; _l: &&_l;})
-
-/* If you change this, you must change the associated assembly-languages
- constants defined below, THREAD_*. */
-struct thread_struct {
- /* kernel stack pointer (must be first field in structure) */
- unsigned long ksp;
-};
-
-#define INIT_THREAD { sizeof init_stack + (unsigned long)init_stack }
-
-
-/* Do necessary setup to start up a newly executed thread. */
-static inline void start_thread (struct pt_regs *regs,
- unsigned long pc, unsigned long usp)
-{
- regs->pc = pc;
- regs->gpr[GPR_SP] = usp;
- regs->kernel_mode = 0;
-}
-
-/* Free all resources held by a thread. */
-static inline void release_thread (struct task_struct *dead_task)
-{
-}
-
-/* Prepare to copy thread state - unlazy all lazy status */
-#define prepare_to_copy(tsk) do { } while (0)
-
-extern int kernel_thread (int (*fn)(void *), void * arg, unsigned long flags);
-
-/* Free current thread data structures etc. */
-static inline void exit_thread (void)
-{
-}
-
-
-/* Return the registers saved during context-switch by the currently
- not-running thread T. Note that this only includes some registers!
- See entry.S for details. */
-#define thread_saved_regs(t) \
- ((struct pt_regs*)((t)->thread.ksp + STATE_SAVE_PT_OFFSET))
-/* Return saved (kernel) PC of a blocked thread. Actually, we return the
- LP register, because the thread is actually blocked in switch_thread,
- and we're interested in the PC it will _return_ to. */
-#define thread_saved_pc(t) (thread_saved_regs(t)->gpr[GPR_LP])
-
-
-unsigned long get_wchan (struct task_struct *p);
-
-
-/* Return some info about the user process TASK. */
-#define task_tos(task) ((unsigned long)task_stack_page(task) + THREAD_SIZE)
-#define task_pt_regs(task) ((struct pt_regs *)task_tos (task) - 1)
-#define task_sp(task) (task_pt_regs (task)->gpr[GPR_SP])
-#define task_pc(task) (task_pt_regs (task)->pc)
-/* Grotty old names for some. */
-#define KSTK_EIP(task) task_pc (task)
-#define KSTK_ESP(task) task_sp (task)
-
-
-#define cpu_relax() barrier()
-
-
-#else /* __ASSEMBLY__ */
-
-#define THREAD_KSP 0
-
-#endif /* !__ASSEMBLY__ */
-
-
-#endif /* __V850_PROCESSOR_H__ */
diff --git a/include/asm-v850/ptrace.h b/include/asm-v850/ptrace.h
deleted file mode 100644
index 4f35cf2cd641..000000000000
--- a/include/asm-v850/ptrace.h
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * include/asm-v850/ptrace.h -- Access to CPU registers
- *
- * Copyright (C) 2001,02,03 NEC Electronics Corporation
- * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_PTRACE_H__
-#define __V850_PTRACE_H__
-
-
-/* v850 general purpose registers with special meanings. */
-#define GPR_ZERO 0 /* constant zero */
-#define GPR_ASM 1 /* reserved for assembler */
-#define GPR_SP 3 /* stack pointer */
-#define GPR_GP 4 /* global data pointer */
-#define GPR_TP 5 /* `text pointer' */
-#define GPR_EP 30 /* `element pointer' */
-#define GPR_LP 31 /* link pointer (current return address) */
-
-/* These aren't official names, but they make some code more descriptive. */
-#define GPR_ARG0 6
-#define GPR_ARG1 7
-#define GPR_ARG2 8
-#define GPR_ARG3 9
-#define GPR_RVAL0 10
-#define GPR_RVAL1 11
-#define GPR_RVAL GPR_RVAL0
-
-#define NUM_GPRS 32
-
-/* v850 `system' registers. */
-#define SR_EIPC 0
-#define SR_EIPSW 1
-#define SR_FEPC 2
-#define SR_FEPSW 3
-#define SR_ECR 4
-#define SR_PSW 5
-#define SR_CTPC 16
-#define SR_CTPSW 17
-#define SR_DBPC 18
-#define SR_DBPSW 19
-#define SR_CTBP 20
-#define SR_DIR 21
-#define SR_ASID 23
-
-
-#ifndef __ASSEMBLY__
-
-typedef unsigned long v850_reg_t;
-
-/* How processor state is stored on the stack during a syscall/signal.
- If you change this structure, change the associated assembly-language
- macros below too (PT_*)! */
-struct pt_regs
-{
- /* General purpose registers. */
- v850_reg_t gpr[NUM_GPRS];
-
- v850_reg_t pc; /* program counter */
- v850_reg_t psw; /* program status word */
-
- /* Registers used by `callt' instruction: */
- v850_reg_t ctpc; /* saved program counter */
- v850_reg_t ctpsw; /* saved psw */
- v850_reg_t ctbp; /* base pointer for callt table */
-
- char kernel_mode; /* 1 if in `kernel mode', 0 if user mode */
-};
-
-
-#define instruction_pointer(regs) ((regs)->pc)
-#define profile_pc(regs) instruction_pointer(regs)
-#define user_mode(regs) (!(regs)->kernel_mode)
-
-/* When a struct pt_regs is used to save user state for a system call in
- the kernel, the system call is stored in the space for R0 (since it's
- never used otherwise, R0 being a constant 0). Non-system-calls
- simply store 0 there. */
-#define PT_REGS_SYSCALL(regs) (regs)->gpr[0]
-#define PT_REGS_SET_SYSCALL(regs, val) ((regs)->gpr[0] = (val))
-
-#endif /* !__ASSEMBLY__ */
-
-
-/* The number of bytes used to store each register. */
-#define _PT_REG_SIZE 4
-
-/* Offset of a general purpose register in a struct pt_regs. */
-#define PT_GPR(num) ((num) * _PT_REG_SIZE)
-
-/* Offsets of various special registers & fields in a struct pt_regs. */
-#define PT_PC ((NUM_GPRS + 0) * _PT_REG_SIZE)
-#define PT_PSW ((NUM_GPRS + 1) * _PT_REG_SIZE)
-#define PT_CTPC ((NUM_GPRS + 2) * _PT_REG_SIZE)
-#define PT_CTPSW ((NUM_GPRS + 3) * _PT_REG_SIZE)
-#define PT_CTBP ((NUM_GPRS + 4) * _PT_REG_SIZE)
-#define PT_KERNEL_MODE ((NUM_GPRS + 5) * _PT_REG_SIZE)
-
-/* Where the current syscall number is stashed; obviously only valid in
- the kernel! */
-#define PT_CUR_SYSCALL PT_GPR(0)
-
-/* Size of struct pt_regs, including alignment. */
-#define PT_SIZE ((NUM_GPRS + 6) * _PT_REG_SIZE)
-
-
-/* These are `magic' values for PTRACE_PEEKUSR that return info about where
- a process is located in memory. */
-#define PT_TEXT_ADDR (PT_SIZE + 1)
-#define PT_TEXT_LEN (PT_SIZE + 2)
-#define PT_DATA_ADDR (PT_SIZE + 3)
-
-
-#endif /* __V850_PTRACE_H__ */
diff --git a/include/asm-v850/resource.h b/include/asm-v850/resource.h
deleted file mode 100644
index 4b9dcd44f8d1..000000000000
--- a/include/asm-v850/resource.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __V850_RESOURCE_H__
-#define __V850_RESOURCE_H__
-
-#include <asm-generic/resource.h>
-
-#endif /* __V850_RESOURCE_H__ */
diff --git a/include/asm-v850/rte_cb.h b/include/asm-v850/rte_cb.h
deleted file mode 100644
index db9879f00aa7..000000000000
--- a/include/asm-v850/rte_cb.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * include/asm-v850/rte_cb.h -- Midas labs RTE-CB series of evaluation boards
- *
- * Copyright (C) 2001,02,03 NEC Electronics Corporation
- * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_RTE_CB_H__
-#define __V850_RTE_CB_H__
-
-
-/* The SRAM on the Mother-A motherboard. */
-#define MB_A_SRAM_ADDR GCS0_ADDR
-#define MB_A_SRAM_SIZE 0x00200000 /* 2MB */
-
-
-#ifdef CONFIG_RTE_GBUS_INT
-/* GBUS interrupt support. */
-
-# include <asm/gbus_int.h>
-
-# define GBUS_INT_BASE_IRQ NUM_RTE_CB_IRQS
-# define GBUS_INT_BASE_ADDR (GCS2_ADDR + 0x00006000)
-
-/* Some specific interrupts. */
-# define IRQ_MB_A_LAN IRQ_GBUS_INT(10)
-# define IRQ_MB_A_PCI1(n) (IRQ_GBUS_INT(16) + (n))
-# define IRQ_MB_A_PCI1_NUM 4
-# define IRQ_MB_A_PCI2(n) (IRQ_GBUS_INT(20) + (n))
-# define IRQ_MB_A_PCI2_NUM 4
-# define IRQ_MB_A_EXT(n) (IRQ_GBUS_INT(24) + (n))
-# define IRQ_MB_A_EXT_NUM 4
-# define IRQ_MB_A_USB_OC(n) (IRQ_GBUS_INT(28) + (n))
-# define IRQ_MB_A_USB_OC_NUM 2
-# define IRQ_MB_A_PCMCIA_OC IRQ_GBUS_INT(30)
-
-/* We define NUM_MACH_IRQS to include extra interrupts from the GBUS. */
-# define NUM_MACH_IRQS (NUM_RTE_CB_IRQS + IRQ_GBUS_INT_NUM)
-
-#else /* !CONFIG_RTE_GBUS_INT */
-
-# define NUM_MACH_IRQS NUM_RTE_CB_IRQS
-
-#endif /* CONFIG_RTE_GBUS_INT */
-
-
-#ifdef CONFIG_RTE_MB_A_PCI
-/* Mother-A PCI bus support. */
-
-# include <asm/rte_mb_a_pci.h>
-
-/* These are the base addresses used for allocating device address
- space. 512K of the motherboard SRAM is in the same space, so we have
- to be careful not to let it be allocated. */
-# define PCIBIOS_MIN_MEM (MB_A_PCI_MEM_ADDR + 0x80000)
-# define PCIBIOS_MIN_IO MB_A_PCI_IO_ADDR
-
-/* As we don't really support PCI DMA to cpu memory, and use bounce-buffers
- instead, perversely enough, this becomes always true! */
-# define pci_dma_supported(dev, mask) 1
-# define pcibios_assign_all_busses() 1
-
-#endif /* CONFIG_RTE_MB_A_PCI */
-
-
-#ifndef __ASSEMBLY__
-extern void rte_cb_early_init (void);
-extern void rte_cb_init_irqs (void);
-#endif /* !__ASSEMBLY__ */
-
-
-#endif /* __V850_RTE_CB_H__ */
diff --git a/include/asm-v850/rte_ma1_cb.h b/include/asm-v850/rte_ma1_cb.h
deleted file mode 100644
index bd3162ab9844..000000000000
--- a/include/asm-v850/rte_ma1_cb.h
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * include/asm-v850/rte_ma1_cb.h -- Midas labs RTE-V850/MA1-CB board
- *
- * Copyright (C) 2001,02,03 NEC Electronics Corporation
- * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_RTE_MA1_CB_H__
-#define __V850_RTE_MA1_CB_H__
-
-#include <asm/rte_cb.h> /* Common defs for Midas RTE-CB boards. */
-
-
-#define PLATFORM "rte-v850e/ma1-cb"
-#define PLATFORM_LONG "Midas lab RTE-V850E/MA1-CB"
-
-#define CPU_CLOCK_FREQ 50000000 /* 50MHz */
-
-/* 1MB of onboard SRAM. Note that the monitor ROM uses parts of this
- for its own purposes, so care must be taken. Some address lines are
- not decoded, so the SRAM area is mirrored every 1MB from 0x400000 to
- 0x800000 (exclusive). */
-#define SRAM_ADDR 0x00400000
-#define SRAM_SIZE 0x00100000 /* 1MB */
-
-/* 32MB of onbard SDRAM. */
-#define SDRAM_ADDR 0x00800000
-#define SDRAM_SIZE 0x02000000 /* 32MB */
-
-
-/* CPU addresses of GBUS memory spaces. */
-#define GCS0_ADDR 0x05000000 /* GCS0 - Common SRAM (2MB) */
-#define GCS0_SIZE 0x00200000 /* 2MB */
-#define GCS1_ADDR 0x06000000 /* GCS1 - Flash ROM (8MB) */
-#define GCS1_SIZE 0x00800000 /* 8MB */
-#define GCS2_ADDR 0x07900000 /* GCS2 - I/O registers */
-#define GCS2_SIZE 0x00400000 /* 4MB */
-#define GCS5_ADDR 0x04000000 /* GCS5 - PCI bus space */
-#define GCS5_SIZE 0x01000000 /* 16MB */
-#define GCS6_ADDR 0x07980000 /* GCS6 - PCI control registers */
-#define GCS6_SIZE 0x00000200 /* 512B */
-
-
-/* For <asm/page.h> */
-#define PAGE_OFFSET SRAM_ADDR
-
-
-/* The GBUS GINT0 - GINT3 interrupts are connected to the INTP000 - INTP011
- pins on the CPU. These are shared among the GBUS interrupts. */
-#define IRQ_GINT(n) IRQ_INTP(n)
-#define IRQ_GINT_NUM 4
-
-/* Used by <asm/rte_cb.h> to derive NUM_MACH_IRQS. */
-#define NUM_RTE_CB_IRQS NUM_CPU_IRQS
-
-
-#ifdef CONFIG_ROM_KERNEL
-/* Kernel is in ROM, starting at address 0. */
-
-#define INTV_BASE 0
-
-#else /* !CONFIG_ROM_KERNEL */
-
-#ifdef CONFIG_RTE_CB_MULTI
-/* Using RAM kernel with ROM monitor for Multi debugger. */
-
-/* The chip's real interrupt vectors are in ROM, but they jump to a
- secondary interrupt vector table in RAM. */
-#define INTV_BASE 0x004F8000
-
-/* Scratch memory used by the ROM monitor, which shouldn't be used by
- linux (except for the alternate interrupt vector area, defined
- above). */
-#define MON_SCRATCH_ADDR 0x004F8000
-#define MON_SCRATCH_SIZE 0x00008000 /* 32KB */
-
-#else /* !CONFIG_RTE_CB_MULTI */
-/* Using RAM-kernel. Assume some sort of boot-loader got us loaded at
- address 0. */
-
-#define INTV_BASE 0
-
-#endif /* CONFIG_RTE_CB_MULTI */
-
-#endif /* CONFIG_ROM_KERNEL */
-
-
-/* Some misc. on-board devices. */
-
-/* Seven-segment LED display (two digits). Write-only. */
-#define LED_ADDR(n) (0x07802000 + (n))
-#define LED(n) (*(volatile unsigned char *)LED_ADDR(n))
-#define LED_NUM_DIGITS 2
-
-
-/* Override the basic MA uart pre-initialization so that we can
- initialize extra stuff. */
-#undef V850E_UART_PRE_CONFIGURE /* should be defined by <asm/ma.h> */
-#define V850E_UART_PRE_CONFIGURE rte_ma1_cb_uart_pre_configure
-#ifndef __ASSEMBLY__
-extern void rte_ma1_cb_uart_pre_configure (unsigned chan,
- unsigned cflags, unsigned baud);
-#endif
-
-/* This board supports RTS/CTS for the on-chip UART, but only for channel 0. */
-
-/* CTS for UART channel 0 is pin P43 (bit 3 of port 4). */
-#define V850E_UART_CTS(chan) ((chan) == 0 ? !(MA_PORT4_IO & 0x8) : 1)
-/* RTS for UART channel 0 is pin P42 (bit 2 of port 4). */
-#define V850E_UART_SET_RTS(chan, val) \
- do { \
- if (chan == 0) { \
- unsigned old = MA_PORT4_IO; \
- if (val) \
- MA_PORT4_IO = old & ~0x4; \
- else \
- MA_PORT4_IO = old | 0x4; \
- } \
- } while (0)
-
-
-#endif /* __V850_RTE_MA1_CB_H__ */
diff --git a/include/asm-v850/rte_mb_a_pci.h b/include/asm-v850/rte_mb_a_pci.h
deleted file mode 100644
index 41ac185ca9cd..000000000000
--- a/include/asm-v850/rte_mb_a_pci.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * include/asm-v850/mb_a_pci.h -- PCI support for Midas lab RTE-MOTHER-A board
- *
- * Copyright (C) 2001 NEC Corporation
- * Copyright (C) 2001 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_MB_A_PCI_H__
-#define __V850_MB_A_PCI_H__
-
-
-#define MB_A_PCI_MEM_ADDR GCS5_ADDR
-#define MB_A_PCI_MEM_SIZE (GCS5_SIZE / 2)
-#define MB_A_PCI_IO_ADDR (GCS5_ADDR + MB_A_PCI_MEM_SIZE)
-#define MB_A_PCI_IO_SIZE (GCS5_SIZE / 2)
-#define MB_A_PCI_REG_BASE_ADDR GCS6_ADDR
-
-#define MB_A_PCI_PCICR_ADDR (MB_A_PCI_REG_BASE_ADDR + 0x4)
-#define MB_A_PCI_PCICR (*(volatile u16 *)MB_A_PCI_PCICR_ADDR)
-#define MB_A_PCI_PCISR_ADDR (MB_A_PCI_REG_BASE_ADDR + 0x6)
-#define MB_A_PCI_PCISR (*(volatile u16 *)MB_A_PCI_PCISR_ADDR)
-#define MB_A_PCI_PCILTR_ADDR (MB_A_PCI_REG_BASE_ADDR + 0xD)
-#define MB_A_PCI_PCILTR (*(volatile u8 *)MB_A_PCI_PCILTR_ADDR)
-#define MB_A_PCI_PCIBAR0_ADDR (MB_A_PCI_REG_BASE_ADDR + 0x10)
-#define MB_A_PCI_PCIBAR0 (*(volatile u32 *)MB_A_PCI_PCIBAR0_ADDR)
-#define MB_A_PCI_PCIBAR1_ADDR (MB_A_PCI_REG_BASE_ADDR + 0x14)
-#define MB_A_PCI_PCIBAR1 (*(volatile u32 *)MB_A_PCI_PCIBAR1_ADDR)
-#define MB_A_PCI_PCIBAR2_ADDR (MB_A_PCI_REG_BASE_ADDR + 0x18)
-#define MB_A_PCI_PCIBAR2 (*(volatile u32 *)MB_A_PCI_PCIBAR2_ADDR)
-#define MB_A_PCI_VENDOR_ID_ADDR (MB_A_PCI_REG_BASE_ADDR + 0x2C)
-#define MB_A_PCI_VENDOR_ID (*(volatile u16 *)MB_A_PCI_VENDOR_ID_ADDR)
-#define MB_A_PCI_DEVICE_ID_ADDR (MB_A_PCI_REG_BASE_ADDR + 0x2E)
-#define MB_A_PCI_DEVICE_ID (*(volatile u16 *)MB_A_PCI_DEVICE_ID_ADDR)
-#define MB_A_PCI_DMRR_ADDR (MB_A_PCI_REG_BASE_ADDR + 0x9C)
-#define MB_A_PCI_DMRR (*(volatile u32 *)MB_A_PCI_DMRR_ADDR)
-#define MB_A_PCI_DMLBAM_ADDR (MB_A_PCI_REG_BASE_ADDR + 0xA0)
-#define MB_A_PCI_DMLBAM (*(volatile u32 *)MB_A_PCI_DMLBAM_ADDR)
-#define MB_A_PCI_DMLBAI_ADDR (MB_A_PCI_REG_BASE_ADDR + 0xA4)
-#define MB_A_PCI_DMLBAI (*(volatile u32 *)MB_A_PCI_DMLBAI_ADDR)
-#define MB_A_PCI_PCIPBAM_ADDR (MB_A_PCI_REG_BASE_ADDR + 0xA8)
-#define MB_A_PCI_PCIPBAM (*(volatile u32 *)MB_A_PCI_PCIPBAM_ADDR)
-/* `PCI Configuration Address Register for Direct Master to PCI IO/CFG' */
-#define MB_A_PCI_DMCFGA_ADDR (MB_A_PCI_REG_BASE_ADDR + 0xAC)
-#define MB_A_PCI_DMCFGA (*(volatile u32 *)MB_A_PCI_DMCFGA_ADDR)
-/* `PCI Permanent Configuration ID Register' */
-#define MB_A_PCI_PCIHIDR_ADDR (MB_A_PCI_REG_BASE_ADDR + 0xF0)
-#define MB_A_PCI_PCIHIDR (*(volatile u32 *)MB_A_PCI_PCIHIDR_ADDR)
-
-
-#endif /* __V850_MB_A_PCI_H__ */
diff --git a/include/asm-v850/rte_me2_cb.h b/include/asm-v850/rte_me2_cb.h
deleted file mode 100644
index 9922c85c85a8..000000000000
--- a/include/asm-v850/rte_me2_cb.h
+++ /dev/null
@@ -1,202 +0,0 @@
-/*
- * include/asm-v850/rte_me2_cb.h -- Midas labs RTE-V850E/ME2-CB board
- *
- * Copyright (C) 2001,02,03 NEC Corporation
- * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_RTE_ME2_CB_H__
-#define __V850_RTE_ME2_CB_H__
-
-#include <asm/rte_cb.h> /* Common defs for Midas RTE-CB boards. */
-
-
-#define PLATFORM "rte-v850e/me2-cb"
-#define PLATFORM_LONG "Midas lab RTE-V850E/ME2-CB"
-
-#define CPU_CLOCK_FREQ 150000000 /* 150MHz */
-#define FIXED_BOGOMIPS 50
-
-/* 32MB of onbard SDRAM. */
-#define SDRAM_ADDR 0x00800000
-#define SDRAM_SIZE 0x02000000 /* 32MB */
-
-
-/* CPU addresses of GBUS memory spaces. */
-#define GCS0_ADDR 0x04000000 /* GCS0 - Common SRAM (2MB) */
-#define GCS0_SIZE 0x00800000 /* 8MB */
-#define GCS1_ADDR 0x04800000 /* GCS1 - Flash ROM (8MB) */
-#define GCS1_SIZE 0x00800000 /* 8MB */
-#define GCS2_ADDR 0x07000000 /* GCS2 - I/O registers */
-#define GCS2_SIZE 0x00800000 /* 8MB */
-#define GCS5_ADDR 0x08000000 /* GCS5 - PCI bus space */
-#define GCS5_SIZE 0x02000000 /* 32MB */
-#define GCS6_ADDR 0x07800000 /* GCS6 - PCI control registers */
-#define GCS6_SIZE 0x00800000 /* 8MB */
-
-
-/* For <asm/page.h> */
-#define PAGE_OFFSET SDRAM_ADDR
-
-
-#ifdef CONFIG_ROM_KERNEL
-/* Kernel is in ROM, starting at address 0. */
-
-#define INTV_BASE 0
-#define ROOT_FS_IMAGE_RW 0
-
-#else /* !CONFIG_ROM_KERNEL */
-/* Using RAM-kernel. Assume some sort of boot-loader got us loaded at
- address 0. */
-
-#define INTV_BASE 0
-#define ROOT_FS_IMAGE_RW 1
-
-#endif /* CONFIG_ROM_KERNEL */
-
-
-/* Some misc. on-board devices. */
-
-/* Seven-segment LED display (four digits). */
-#define LED_ADDR(n) (0x0FE02000 + (n))
-#define LED(n) (*(volatile unsigned char *)LED_ADDR(n))
-#define LED_NUM_DIGITS 4
-
-
-/* On-board PIC. */
-
-#define CB_PIC_BASE_ADDR 0x0FE04000
-
-#define CB_PIC_INT0M_ADDR (CB_PIC_BASE_ADDR + 0x00)
-#define CB_PIC_INT0M (*(volatile u16 *)CB_PIC_INT0M_ADDR)
-#define CB_PIC_INT1M_ADDR (CB_PIC_BASE_ADDR + 0x10)
-#define CB_PIC_INT1M (*(volatile u16 *)CB_PIC_INT1M_ADDR)
-#define CB_PIC_INTR_ADDR (CB_PIC_BASE_ADDR + 0x20)
-#define CB_PIC_INTR (*(volatile u16 *)CB_PIC_INTR_ADDR)
-#define CB_PIC_INTEN_ADDR (CB_PIC_BASE_ADDR + 0x30)
-#define CB_PIC_INTEN (*(volatile u16 *)CB_PIC_INTEN_ADDR)
-
-#define CB_PIC_INT0EN 0x0001
-#define CB_PIC_INT1EN 0x0002
-#define CB_PIC_INT0SEL 0x0080
-
-/* The PIC interrupts themselves. */
-#define CB_PIC_BASE_IRQ NUM_CPU_IRQS
-#define IRQ_CB_PIC_NUM 10
-
-/* Some specific CB_PIC interrupts. */
-#define IRQ_CB_EXTTM0 (CB_PIC_BASE_IRQ + 0)
-#define IRQ_CB_EXTSIO (CB_PIC_BASE_IRQ + 1)
-#define IRQ_CB_TOVER (CB_PIC_BASE_IRQ + 2)
-#define IRQ_CB_GINT0 (CB_PIC_BASE_IRQ + 3)
-#define IRQ_CB_USB (CB_PIC_BASE_IRQ + 4)
-#define IRQ_CB_LANC (CB_PIC_BASE_IRQ + 5)
-#define IRQ_CB_USB_VBUS_ON (CB_PIC_BASE_IRQ + 6)
-#define IRQ_CB_USB_VBUS_OFF (CB_PIC_BASE_IRQ + 7)
-#define IRQ_CB_EXTTM1 (CB_PIC_BASE_IRQ + 8)
-#define IRQ_CB_EXTTM2 (CB_PIC_BASE_IRQ + 9)
-
-/* The GBUS GINT1 - GINT3 (note, not GINT0!) interrupts are connected to
- the INTP65 - INTP67 pins on the CPU. These are shared among the GBUS
- interrupts. */
-#define IRQ_GINT(n) IRQ_INTP((n) + 9) /* 0 is unused! */
-#define IRQ_GINT_NUM 4 /* 0 is unused! */
-
-/* The shared interrupt line from the PIC is connected to CPU pin INTP23. */
-#define IRQ_CB_PIC IRQ_INTP(4) /* P23 */
-
-/* Used by <asm/rte_cb.h> to derive NUM_MACH_IRQS. */
-#define NUM_RTE_CB_IRQS (NUM_CPU_IRQS + IRQ_CB_PIC_NUM)
-
-
-#ifndef __ASSEMBLY__
-struct cb_pic_irq_init {
- const char *name; /* name of interrupt type */
-
- /* Range of kernel irq numbers for this type:
- BASE, BASE+INTERVAL, ..., BASE+INTERVAL*NUM */
- unsigned base, num, interval;
-
- unsigned priority; /* interrupt priority to assign */
-};
-struct hw_interrupt_type; /* fwd decl */
-
-/* Enable interrupt handling for interrupt IRQ. */
-extern void cb_pic_enable_irq (unsigned irq);
-/* Disable interrupt handling for interrupt IRQ. Note that any interrupts
- received while disabled will be delivered once the interrupt is enabled
- again, unless they are explicitly cleared using `cb_pic_clear_pending_irq'. */
-extern void cb_pic_disable_irq (unsigned irq);
-/* Initialize HW_IRQ_TYPES for PIC irqs described in array INITS (which is
- terminated by an entry with the name field == 0). */
-extern void cb_pic_init_irq_types (struct cb_pic_irq_init *inits,
- struct hw_interrupt_type *hw_irq_types);
-/* Initialize PIC interrupts. */
-extern void cb_pic_init_irqs (void);
-#endif /* __ASSEMBLY__ */
-
-
-/* TL16C550C on board UART see also asm/serial.h */
-#define CB_UART_BASE 0x0FE08000
-#define CB_UART_REG_GAP 0x10
-#define CB_UART_CLOCK 0x16000000
-
-/* CompactFlash setting */
-#define CB_CF_BASE 0x0FE0C000
-#define CB_CF_CCR_ADDR (CB_CF_BASE+0x200)
-#define CB_CF_CCR (*(volatile u8 *)CB_CF_CCR_ADDR)
-#define CB_CF_REG0_ADDR (CB_CF_BASE+0x1000)
-#define CB_CF_REG0 (*(volatile u16 *)CB_CF_REG0_ADDR)
-#define CB_CF_STS0_ADDR (CB_CF_BASE+0x1004)
-#define CB_CF_STS0 (*(volatile u16 *)CB_CF_STS0_ADDR)
-#define CB_PCATA_BASE (CB_CF_BASE+0x800)
-#define CB_IDE_BASE (CB_CF_BASE+0x9F0)
-#define CB_IDE_CTRL (CB_CF_BASE+0xBF6)
-#define CB_IDE_REG_OFFS 0x1
-
-
-/* SMSC LAN91C111 setting */
-#if defined(CONFIG_SMC91111)
-#define CB_LANC_BASE 0x0FE10300
-#define CONFIG_SMC16BITONLY
-#define ETH0_ADDR CB_LANC_BASE
-#define ETH0_IRQ IRQ_CB_LANC
-#endif /* CONFIG_SMC16BITONLY */
-
-
-#undef V850E_UART_PRE_CONFIGURE
-#define V850E_UART_PRE_CONFIGURE rte_me2_cb_uart_pre_configure
-#ifndef __ASSEMBLY__
-extern void rte_me2_cb_uart_pre_configure (unsigned chan,
- unsigned cflags, unsigned baud);
-#endif /* __ASSEMBLY__ */
-
-/* This board supports RTS/CTS for the on-chip UART, but only for channel 0. */
-
-/* CTS for UART channel 0 is pin P22 (bit 2 of port 2). */
-#define V850E_UART_CTS(chan) ((chan) == 0 ? !(ME2_PORT2_IO & 0x4) : 1)
-/* RTS for UART channel 0 is pin P21 (bit 1 of port 2). */
-#define V850E_UART_SET_RTS(chan, val) \
- do { \
- if (chan == 0) { \
- unsigned old = ME2_PORT2_IO; \
- if (val) \
- ME2_PORT2_IO = old & ~0x2; \
- else \
- ME2_PORT2_IO = old | 0x2; \
- } \
- } while (0)
-
-
-#ifndef __ASSEMBLY__
-extern void rte_me2_cb_init_irqs (void);
-#endif /* !__ASSEMBLY__ */
-
-
-#endif /* __V850_RTE_ME2_CB_H__ */
diff --git a/include/asm-v850/rte_nb85e_cb.h b/include/asm-v850/rte_nb85e_cb.h
deleted file mode 100644
index f56591cad90a..000000000000
--- a/include/asm-v850/rte_nb85e_cb.h
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * include/asm-v850/rte_nb85e_cb.h -- Midas labs RTE-V850/NB85E-CB board
- *
- * Copyright (C) 2001,02,03 NEC Electronics Corporation
- * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_RTE_NB85E_CB_H__
-#define __V850_RTE_NB85E_CB_H__
-
-#include <asm/rte_cb.h> /* Common defs for Midas RTE-CB boards. */
-
-
-#define PLATFORM "rte-v850e/nb85e-cb"
-#define PLATFORM_LONG "Midas lab RTE-V850E/NB85E-CB"
-
-#define CPU_CLOCK_FREQ 50000000 /* 50MHz */
-
-/* 1MB of onboard SRAM. Note that the monitor ROM uses parts of this
- for its own purposes, so care must be taken. */
-#define SRAM_ADDR 0x03C00000
-#define SRAM_SIZE 0x00100000 /* 1MB */
-
-/* 16MB of onbard SDRAM. */
-#define SDRAM_ADDR 0x01000000
-#define SDRAM_SIZE 0x01000000 /* 16MB */
-
-
-/* CPU addresses of GBUS memory spaces. */
-#define GCS0_ADDR 0x00400000 /* GCS0 - Common SRAM (2MB) */
-#define GCS0_SIZE 0x00400000 /* 4MB */
-#define GCS1_ADDR 0x02000000 /* GCS1 - Flash ROM (8MB) */
-#define GCS1_SIZE 0x00800000 /* 8MB */
-#define GCS2_ADDR 0x03900000 /* GCS2 - I/O registers */
-#define GCS2_SIZE 0x00080000 /* 512KB */
-#define GCS3_ADDR 0x02800000 /* GCS3 - EXT-bus: memory space */
-#define GCS3_SIZE 0x00800000 /* 8MB */
-#define GCS4_ADDR 0x03A00000 /* GCS4 - EXT-bus: I/O space */
-#define GCS4_SIZE 0x00200000 /* 2MB */
-#define GCS5_ADDR 0x00800000 /* GCS5 - PCI bus space */
-#define GCS5_SIZE 0x00800000 /* 8MB */
-#define GCS6_ADDR 0x03980000 /* GCS6 - PCI control registers */
-#define GCS6_SIZE 0x00010000 /* 64KB */
-
-
-/* The GBUS GINT0 - GINT3 interrupts are connected to CPU interrupts 10-12.
- These are shared among the GBUS interrupts. */
-#define IRQ_GINT(n) (10 + (n))
-#define IRQ_GINT_NUM 3
-
-/* Used by <asm/rte_cb.h> to derive NUM_MACH_IRQS. */
-#define NUM_RTE_CB_IRQS NUM_CPU_IRQS
-
-
-#ifdef CONFIG_ROM_KERNEL
-/* Kernel is in ROM, starting at address 0. */
-
-#define INTV_BASE 0
-
-#else /* !CONFIG_ROM_KERNEL */
-/* We're using the ROM monitor. */
-
-/* The chip's real interrupt vectors are in ROM, but they jump to a
- secondary interrupt vector table in RAM. */
-#define INTV_BASE 0x03CF8000
-
-/* Scratch memory used by the ROM monitor, which shouldn't be used by
- linux (except for the alternate interrupt vector area, defined
- above). */
-#define MON_SCRATCH_ADDR 0x03CE8000
-#define MON_SCRATCH_SIZE 0x00018000 /* 96KB */
-
-#endif /* CONFIG_ROM_KERNEL */
-
-
-/* Some misc. on-board devices. */
-
-/* Seven-segment LED display (two digits). Write-only. */
-#define LED_ADDR(n) (0x03802000 + (n))
-#define LED(n) (*(volatile unsigned char *)LED_ADDR(n))
-#define LED_NUM_DIGITS 4
-
-
-/* Override the basic TEG UART pre-initialization so that we can
- initialize extra stuff. */
-#undef V850E_UART_PRE_CONFIGURE /* should be defined by <asm/teg.h> */
-#define V850E_UART_PRE_CONFIGURE rte_nb85e_cb_uart_pre_configure
-#ifndef __ASSEMBLY__
-extern void rte_nb85e_cb_uart_pre_configure (unsigned chan,
- unsigned cflags, unsigned baud);
-#endif
-
-/* This board supports RTS/CTS for the on-chip UART. */
-
-/* CTS is pin P00. */
-#define V850E_UART_CTS(chan) (! (TEG_PORT0_IO & 0x1))
-/* RTS is pin P02. */
-#define V850E_UART_SET_RTS(chan, val) \
- do { \
- unsigned old = TEG_PORT0_IO; \
- TEG_PORT0_IO = val ? (old & ~0x4) : (old | 0x4); \
- } while (0)
-
-
-#endif /* __V850_RTE_NB85E_CB_H__ */
diff --git a/include/asm-v850/scatterlist.h b/include/asm-v850/scatterlist.h
deleted file mode 100644
index 02d27b3fb061..000000000000
--- a/include/asm-v850/scatterlist.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * include/asm-v850/scatterlist.h
- *
- * Copyright (C) 2001,02 NEC Corporation
- * Copyright (C) 2001,02 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_SCATTERLIST_H__
-#define __V850_SCATTERLIST_H__
-
-#include <asm/types.h>
-
-struct scatterlist {
-#ifdef CONFIG_DEBUG_SG
- unsigned long sg_magic;
-#endif
- unsigned long page_link;
- unsigned offset;
- dma_addr_t dma_address;
- unsigned length;
-};
-
-#define ISA_DMA_THRESHOLD (~0UL)
-
-#endif /* __V850_SCATTERLIST_H__ */
diff --git a/include/asm-v850/sections.h b/include/asm-v850/sections.h
deleted file mode 100644
index e0238253a0d0..000000000000
--- a/include/asm-v850/sections.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __V850_SECTIONS_H__
-#define __V850_SECTIONS_H__
-
-#include <asm-generic/sections.h>
-
-#endif /* __V850_SECTIONS_H__ */
diff --git a/include/asm-v850/segment.h b/include/asm-v850/segment.h
deleted file mode 100644
index 5e2b15dcf3d9..000000000000
--- a/include/asm-v850/segment.h
+++ /dev/null
@@ -1,36 +0,0 @@
-#ifndef __V850_SEGMENT_H__
-#define __V850_SEGMENT_H__
-
-
-#ifndef __ASSEMBLY__
-
-typedef unsigned long mm_segment_t; /* domain register */
-
-#endif /* !__ASSEMBLY__ */
-
-
-#define __KERNEL_CS 0x0
-#define __KERNEL_DS 0x0
-
-#define __USER_CS 0x1
-#define __USER_DS 0x1
-
-#define KERNEL_DS __KERNEL_DS
-#define KERNEL_CS __KERNEL_CS
-#define USER_DS __USER_DS
-#define USER_CS __USER_CS
-
-#define segment_eq(a,b) ((a) == (b))
-
-#define get_ds() (KERNEL_DS)
-#define get_fs() (USER_DS)
-
-#define set_fs(seg) ((void)(seg))
-
-
-#define copy_segments(task, mm) ((void)((void)(task), (mm)))
-#define release_segments(mm) ((void)(mm))
-#define forget_segments() ((void)0)
-
-
-#endif /* __V850_SEGMENT_H__ */
diff --git a/include/asm-v850/semaphore.h b/include/asm-v850/semaphore.h
deleted file mode 100644
index d9b2034ed1d2..000000000000
--- a/include/asm-v850/semaphore.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <linux/semaphore.h>
diff --git a/include/asm-v850/sembuf.h b/include/asm-v850/sembuf.h
deleted file mode 100644
index 1622231a8b85..000000000000
--- a/include/asm-v850/sembuf.h
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifndef __V850_SEMBUF_H__
-#define __V850_SEMBUF_H__
-
-/*
- * The semid64_ds structure for v850 architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct semid64_ds {
- struct ipc64_perm sem_perm; /* permissions .. see ipc.h */
- __kernel_time_t sem_otime; /* last semop time */
- unsigned long __unused1;
- __kernel_time_t sem_ctime; /* last change time */
- unsigned long __unused2;
- unsigned long sem_nsems; /* no. of semaphores in array */
- unsigned long __unused3;
- unsigned long __unused4;
-};
-
-#endif /* __V850_SEMBUF_H__ */
diff --git a/include/asm-v850/serial.h b/include/asm-v850/serial.h
deleted file mode 100644
index 36d8f4cbbf39..000000000000
--- a/include/asm-v850/serial.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1999 by Ralf Baechle
- * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
- */
-
-#ifdef CONFIG_RTE_CB_ME2
-
-#include <asm/rte_me2_cb.h>
-
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
-
-#define irq_cannonicalize(x) (x)
-#define BASE_BAUD 250000 /* (16MHz / (16 * 38400)) * 9600 */
-#define SERIAL_PORT_DFNS \
- { 0, BASE_BAUD, CB_UART_BASE, IRQ_CB_EXTSIO, STD_COM_FLAGS },
-
-/* Redefine UART register offsets. */
-#undef UART_RX
-#undef UART_TX
-#undef UART_DLL
-#undef UART_TRG
-#undef UART_DLM
-#undef UART_IER
-#undef UART_FCTR
-#undef UART_IIR
-#undef UART_FCR
-#undef UART_EFR
-#undef UART_LCR
-#undef UART_MCR
-#undef UART_LSR
-#undef UART_MSR
-#undef UART_SCR
-#undef UART_EMSR
-
-#define UART_RX (0 * CB_UART_REG_GAP)
-#define UART_TX (0 * CB_UART_REG_GAP)
-#define UART_DLL (0 * CB_UART_REG_GAP)
-#define UART_TRG (0 * CB_UART_REG_GAP)
-#define UART_DLM (1 * CB_UART_REG_GAP)
-#define UART_IER (1 * CB_UART_REG_GAP)
-#define UART_FCTR (1 * CB_UART_REG_GAP)
-#define UART_IIR (2 * CB_UART_REG_GAP)
-#define UART_FCR (2 * CB_UART_REG_GAP)
-#define UART_EFR (2 * CB_UART_REG_GAP)
-#define UART_LCR (3 * CB_UART_REG_GAP)
-#define UART_MCR (4 * CB_UART_REG_GAP)
-#define UART_LSR (5 * CB_UART_REG_GAP)
-#define UART_MSR (6 * CB_UART_REG_GAP)
-#define UART_SCR (7 * CB_UART_REG_GAP)
-#define UART_EMSR (7 * CB_UART_REG_GAP)
-
-#endif /* CONFIG_RTE_CB_ME2 */
diff --git a/include/asm-v850/setup.h b/include/asm-v850/setup.h
deleted file mode 100644
index c48a9b97d05b..000000000000
--- a/include/asm-v850/setup.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _V850_SETUP_H
-#define _V850_SETUP_H
-
-#define COMMAND_LINE_SIZE 512
-
-#endif /* __SETUP_H */
diff --git a/include/asm-v850/shmbuf.h b/include/asm-v850/shmbuf.h
deleted file mode 100644
index 3d085c9c418e..000000000000
--- a/include/asm-v850/shmbuf.h
+++ /dev/null
@@ -1,42 +0,0 @@
-#ifndef __V850_SHMBUF_H__
-#define __V850_SHMBUF_H__
-
-/*
- * The shmid64_ds structure for v850 architecture.
- * Note extra padding because this structure is passed back and forth
- * between kernel and user space.
- *
- * Pad space is left for:
- * - 64-bit time_t to solve y2038 problem
- * - 2 miscellaneous 32-bit values
- */
-
-struct shmid64_ds {
- struct ipc64_perm shm_perm; /* operation perms */
- size_t shm_segsz; /* size of segment (bytes) */
- __kernel_time_t shm_atime; /* last attach time */
- unsigned long __unused1;
- __kernel_time_t shm_dtime; /* last detach time */
- unsigned long __unused2;
- __kernel_time_t shm_ctime; /* last change time */
- unsigned long __unused3;
- __kernel_pid_t shm_cpid; /* pid of creator */
- __kernel_pid_t shm_lpid; /* pid of last operator */
- unsigned long shm_nattch; /* no. of current attaches */
- unsigned long __unused4;
- unsigned long __unused5;
-};
-
-struct shminfo64 {
- unsigned long shmmax;
- unsigned long shmmin;
- unsigned long shmmni;
- unsigned long shmseg;
- unsigned long shmall;
- unsigned long __unused1;
- unsigned long __unused2;
- unsigned long __unused3;
- unsigned long __unused4;
-};
-
-#endif /* __V850_SHMBUF_H__ */
diff --git a/include/asm-v850/shmparam.h b/include/asm-v850/shmparam.h
deleted file mode 100644
index 7dcb6739073e..000000000000
--- a/include/asm-v850/shmparam.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __V850_SHMPARAM_H__
-#define __V850_SHMPARAM_H__
-
-#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */
-
-#endif /* __V850_SHMPARAM_H__ */
diff --git a/include/asm-v850/sigcontext.h b/include/asm-v850/sigcontext.h
deleted file mode 100644
index e0890f6f4bc9..000000000000
--- a/include/asm-v850/sigcontext.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * include/asm-v850/sigcontext.h -- Signal contexts
- *
- * Copyright (C) 2001 NEC Corporation
- * Copyright (C) 2001 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_SIGCONTEXT_H__
-#define __V850_SIGCONTEXT_H__
-
-#include <asm/ptrace.h>
-
-struct sigcontext
-{
- struct pt_regs regs;
- unsigned long oldmask;
-};
-
-#endif /* __V850_SIGCONTEXT_H__ */
diff --git a/include/asm-v850/siginfo.h b/include/asm-v850/siginfo.h
deleted file mode 100644
index 7eb94703dce0..000000000000
--- a/include/asm-v850/siginfo.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __V850_SIGINFO_H__
-#define __V850_SIGINFO_H__
-
-#include <asm-generic/siginfo.h>
-
-#endif /* __V850_SIGINFO_H__ */
diff --git a/include/asm-v850/signal.h b/include/asm-v850/signal.h
deleted file mode 100644
index a38df0834bbf..000000000000
--- a/include/asm-v850/signal.h
+++ /dev/null
@@ -1,168 +0,0 @@
-#ifndef __V850_SIGNAL_H__
-#define __V850_SIGNAL_H__
-
-#include <linux/types.h>
-
-/* Avoid too many header ordering problems. */
-struct siginfo;
-
-
-#ifdef __KERNEL__
-
-/* Most things should be clean enough to redefine this at will, if care
- is taken to make libc match. */
-#define _NSIG 64
-#define _NSIG_BPW 32
-#define _NSIG_WORDS (_NSIG / _NSIG_BPW)
-
-typedef unsigned long old_sigset_t; /* at least 32 bits */
-
-typedef struct {
- unsigned long sig[_NSIG_WORDS];
-} sigset_t;
-
-#else /* !__KERNEL__ */
-
-/* Here we must cater to libcs that poke about in kernel headers. */
-
-#define NSIG 32
-typedef unsigned long sigset_t;
-
-#endif /* __KERNEL__ */
-
-
-#define SIGHUP 1
-#define SIGINT 2
-#define SIGQUIT 3
-#define SIGILL 4
-#define SIGTRAP 5
-#define SIGABRT 6
-#define SIGIOT 6
-#define SIGBUS 7
-#define SIGFPE 8
-#define SIGKILL 9
-#define SIGUSR1 10
-#define SIGSEGV 11
-#define SIGUSR2 12
-#define SIGPIPE 13
-#define SIGALRM 14
-#define SIGTERM 15
-#define SIGSTKFLT 16
-#define SIGCHLD 17
-#define SIGCONT 18
-#define SIGSTOP 19
-#define SIGTSTP 20
-#define SIGTTIN 21
-#define SIGTTOU 22
-#define SIGURG 23
-#define SIGXCPU 24
-#define SIGXFSZ 25
-#define SIGVTALRM 26
-#define SIGPROF 27
-#define SIGWINCH 28
-#define SIGIO 29
-#define SIGPOLL SIGIO
-/*
-#define SIGLOST 29
-*/
-#define SIGPWR 30
-#define SIGSYS 31
-#define SIGUNUSED 31
-
-/* These should not be considered constants from userland. */
-#define SIGRTMIN 32
-#define SIGRTMAX _NSIG
-
-/*
- * SA_FLAGS values:
- *
- * SA_ONSTACK indicates that a registered stack_t will be used.
- * SA_RESTART flag to get restarting signals (which were the default long ago)
- * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
- * SA_RESETHAND clears the handler when the signal is delivered.
- * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
- * SA_NODEFER prevents the current signal from being masked in the handler.
- *
- * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
- * Unix names RESETHAND and NODEFER respectively.
- */
-#define SA_NOCLDSTOP 0x00000001
-#define SA_NOCLDWAIT 0x00000002
-#define SA_SIGINFO 0x00000004
-#define SA_ONSTACK 0x08000000
-#define SA_RESTART 0x10000000
-#define SA_NODEFER 0x40000000
-#define SA_RESETHAND 0x80000000
-
-#define SA_NOMASK SA_NODEFER
-#define SA_ONESHOT SA_RESETHAND
-
-#define SA_RESTORER 0x04000000
-
-/*
- * sigaltstack controls
- */
-#define SS_ONSTACK 1
-#define SS_DISABLE 2
-
-#define MINSIGSTKSZ 2048
-#define SIGSTKSZ 8192
-
-#include <asm-generic/signal.h>
-
-#ifdef __KERNEL__
-
-struct old_sigaction {
- __sighandler_t sa_handler;
- old_sigset_t sa_mask;
- unsigned long sa_flags;
- void (*sa_restorer)(void);
-};
-
-struct sigaction {
- __sighandler_t sa_handler;
- unsigned long sa_flags;
- void (*sa_restorer)(void);
- sigset_t sa_mask; /* mask last for extensibility */
-};
-
-struct k_sigaction {
- struct sigaction sa;
-};
-
-#else /* !__KERNEL__ */
-
-/* Here we must cater to libcs that poke about in kernel headers. */
-
-struct sigaction {
- union {
- __sighandler_t _sa_handler;
- void (*_sa_sigaction)(int, struct siginfo *, void *);
- } _u;
- sigset_t sa_mask;
- unsigned long sa_flags;
- void (*sa_restorer)(void);
-};
-
-#define sa_handler _u._sa_handler
-#define sa_sigaction _u._sa_sigaction
-
-#endif /* __KERNEL__ */
-
-
-typedef struct sigaltstack {
- void *ss_sp;
- int ss_flags;
- size_t ss_size;
-} stack_t;
-
-#ifdef __KERNEL__
-
-#include <asm/sigcontext.h>
-#undef __HAVE_ARCH_SIG_BITOPS
-
-#define ptrace_signal_deliver(regs, cookie) do { } while (0)
-
-#endif /* __KERNEL__ */
-
-#endif /* __V850_SIGNAL_H__ */
diff --git a/include/asm-v850/sim.h b/include/asm-v850/sim.h
deleted file mode 100644
index 026932d476cd..000000000000
--- a/include/asm-v850/sim.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * include/asm-v850/sim.h -- Machine-dependent defs for GDB v850e simulator
- *
- * Copyright (C) 2001,02,03 NEC Electronics Corporation
- * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_SIM_H__
-#define __V850_SIM_H__
-
-
-#define CPU_ARCH "v850e"
-#define CPU_MODEL "v850e"
-#define CPU_MODEL_LONG "NEC V850E"
-#define PLATFORM "gdb/v850e"
-#define PLATFORM_LONG "GDB V850E simulator"
-
-
-/* We use a weird value for RAM, not just 0, for testing purposes.
- These must match the values used in the linker script. */
-#define RAM_ADDR 0x8F000000
-#define RAM_SIZE 0x03000000
-
-
-/* For <asm/page.h> */
-#define PAGE_OFFSET RAM_ADDR
-
-
-/* For <asm/entry.h> */
-/* `R0 RAM', used for a few miscellaneous variables that must be
- accessible using a load instruction relative to R0. On real
- processors, this usually is on-chip RAM, but here we just
- choose an arbitrary address that meets the above constraint. */
-#define R0_RAM_ADDR 0xFFFFF000
-
-
-/* For <asm/irq.h> */
-#define NUM_CPU_IRQS 6
-
-
-#endif /* __V850_SIM_H__ */
diff --git a/include/asm-v850/sim85e2.h b/include/asm-v850/sim85e2.h
deleted file mode 100644
index 8b4d6974066c..000000000000
--- a/include/asm-v850/sim85e2.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * include/asm-v850/sim85e2.h -- Machine-dependent defs for
- * V850E2 RTL simulator
- *
- * Copyright (C) 2002,03 NEC Electronics Corporation
- * Copyright (C) 2002,03 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_SIM85E2_H__
-#define __V850_SIM85E2_H__
-
-
-#include <asm/v850e2.h> /* Based on V850E2 core. */
-
-
-/* Various memory areas supported by the simulator.
- These should match the corresponding definitions in the linker script. */
-
-/* `instruction RAM'; instruction fetches are much faster from IRAM than
- from DRAM. */
-#define IRAM_ADDR 0
-#define IRAM_SIZE 0x00100000 /* 1MB */
-/* `data RAM', below and contiguous with the I/O space.
- Data fetches are much faster from DRAM than from IRAM. */
-#define DRAM_ADDR 0xfff00000
-#define DRAM_SIZE 0x000ff000 /* 1020KB */
-/* `external ram'. Unlike the above RAM areas, this memory is cached,
- so both instruction and data fetches should be (mostly) fast --
- however, currently only write-through caching is supported, so writes
- to ERAM will be slow. */
-#define ERAM_ADDR 0x00100000
-#define ERAM_SIZE 0x07f00000 /* 127MB (max) */
-/* Dynamic RAM; uses memory controller. */
-#define SDRAM_ADDR 0x10000000
-#define SDRAM_SIZE 0x01000000 /* 16MB */
-
-
-/* Simulator specific control registers. */
-/* NOTHAL controls whether the simulator will stop at a `halt' insn. */
-#define SIM85E2_NOTHAL_ADDR 0xffffff22
-#define SIM85E2_NOTHAL (*(volatile u8 *)SIM85E2_NOTHAL_ADDR)
-/* The simulator will stop N cycles after N is written to SIMFIN. */
-#define SIM85E2_SIMFIN_ADDR 0xffffff24
-#define SIM85E2_SIMFIN (*(volatile u16 *)SIM85E2_SIMFIN_ADDR)
-
-
-/* For <asm/irq.h> */
-#define NUM_CPU_IRQS 64
-
-
-/* For <asm/page.h> */
-#define PAGE_OFFSET SDRAM_ADDR
-
-
-/* For <asm/entry.h> */
-/* `R0 RAM', used for a few miscellaneous variables that must be accessible
- using a load instruction relative to R0. The sim85e2 simulator
- actually puts 1020K of RAM from FFF00000 to FFFFF000, so we arbitarily
- choose a small portion at the end of that. */
-#define R0_RAM_ADDR 0xFFFFE000
-
-
-#endif /* __V850_SIM85E2_H__ */
diff --git a/include/asm-v850/sim85e2c.h b/include/asm-v850/sim85e2c.h
deleted file mode 100644
index eee543ff3af8..000000000000
--- a/include/asm-v850/sim85e2c.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * include/asm-v850/sim85e2c.h -- Machine-dependent defs for
- * V850E2 RTL simulator
- *
- * Copyright (C) 2002 NEC Corporation
- * Copyright (C) 2002 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_SIM85E2C_H__
-#define __V850_SIM85E2C_H__
-
-/* Use generic sim85e2 settings, other than the various names. */
-#include <asm/sim85e2.h>
-
-#define CPU_MODEL "v850e2"
-#define CPU_MODEL_LONG "NEC V850E2"
-#define PLATFORM "sim85e2c"
-#define PLATFORM_LONG "SIM85E2C V850E2 simulator"
-
-#endif /* __V850_SIM85E2C_H__ */
diff --git a/include/asm-v850/sim85e2s.h b/include/asm-v850/sim85e2s.h
deleted file mode 100644
index ee066d5d3c51..000000000000
--- a/include/asm-v850/sim85e2s.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * include/asm-v850/sim85e2s.h -- Machine-dependent defs for
- * V850E2 RTL simulator
- *
- * Copyright (C) 2003 NEC Electronics Corporation
- * Copyright (C) 2003 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_SIM85E2S_H__
-#define __V850_SIM85E2S_H__
-
-#include <asm/sim85e2.h> /* Use generic sim85e2 settings. */
-#if 0
-#include <asm/v850e2_cache.h> /* + cache */
-#endif
-
-#define CPU_MODEL "v850e2"
-#define CPU_MODEL_LONG "NEC V850E2"
-#define PLATFORM "sim85e2s"
-#define PLATFORM_LONG "SIM85E2S V850E2 simulator"
-
-#endif /* __V850_SIM85E2S_H__ */
diff --git a/include/asm-v850/simsyscall.h b/include/asm-v850/simsyscall.h
deleted file mode 100644
index 4a19d5ae9d17..000000000000
--- a/include/asm-v850/simsyscall.h
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * include/asm-v850/simsyscall.h -- `System calls' under the v850e emulator
- *
- * Copyright (C) 2001 NEC Corporation
- * Copyright (C) 2001 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_SIMSYSCALL_H__
-#define __V850_SIMSYSCALL_H__
-
-#define V850_SIM_SYS_exit(a...) V850_SIM_SYSCALL_1 (1 , ##a)
-#define V850_SIM_SYS_fork(a...) V850_SIM_SYSCALL_0 (2 , ##a)
-#define V850_SIM_SYS_read(a...) V850_SIM_SYSCALL_3 (3 , ##a)
-#define V850_SIM_SYS_write(a...) V850_SIM_SYSCALL_3 (4 , ##a)
-#define V850_SIM_SYS_open(a...) V850_SIM_SYSCALL_2 (5 , ##a)
-#define V850_SIM_SYS_close(a...) V850_SIM_SYSCALL_1 (6 , ##a)
-#define V850_SIM_SYS_wait4(a...) V850_SIM_SYSCALL_4 (7 , ##a)
-/* #define V850_SIM_SYS_creat(a...) V850_SIM_SYSCALL_1 (8 , ##a) */
-/* #define V850_SIM_SYS_link(a...) V850_SIM_SYSCALL_1 (9 , ##a) */
-/* #define V850_SIM_SYS_unlink(a...) V850_SIM_SYSCALL_1 (10 , ##a) */
-#define V850_SIM_SYS_execv(a...) V850_SIM_SYSCALL_2 (11 , ##a)
-/* #define V850_SIM_SYS_chdir(a...) V850_SIM_SYSCALL_1 (12 , ##a) */
-/* #define V850_SIM_SYS_mknod(a...) V850_SIM_SYSCALL_1 (14 , ##a) */
-#define V850_SIM_SYS_chmod(a...) V850_SIM_SYSCALL_2 (15 , ##a)
-#define V850_SIM_SYS_chown(a...) V850_SIM_SYSCALL_2 (16 , ##a)
-#define V850_SIM_SYS_lseek(a...) V850_SIM_SYSCALL_3 (19 , ##a)
-/* #define V850_SIM_SYS_getpid(a...) V850_SIM_SYSCALL_1 (20 , ##a) */
-/* #define V850_SIM_SYS_isatty(a...) V850_SIM_SYSCALL_1 (21 , ##a) */
-/* #define V850_SIM_SYS_fstat(a...) V850_SIM_SYSCALL_1 (22 , ##a) */
-#define V850_SIM_SYS_time(a...) V850_SIM_SYSCALL_1 (23 , ##a)
-#define V850_SIM_SYS_poll(a...) V850_SIM_SYSCALL_3 (24 , ##a)
-#define V850_SIM_SYS_stat(a...) V850_SIM_SYSCALL_2 (38 , ##a)
-#define V850_SIM_SYS_pipe(a...) V850_SIM_SYSCALL_1 (42 , ##a)
-#define V850_SIM_SYS_times(a...) V850_SIM_SYSCALL_1 (43 , ##a)
-#define V850_SIM_SYS_execve(a...) V850_SIM_SYSCALL_3 (59 , ##a)
-#define V850_SIM_SYS_gettimeofday(a...) V850_SIM_SYSCALL_2 (116 , ##a)
-/* #define V850_SIM_SYS_utime(a...) V850_SIM_SYSCALL_2 (201 , ##a) */
-/* #define V850_SIM_SYS_wait(a...) V850_SIM_SYSCALL_1 (202 , ##a) */
-
-#define V850_SIM_SYS_make_raw(a...) V850_SIM_SYSCALL_1 (1024 , ##a)
-
-
-#define V850_SIM_SYSCALL_0(_call) \
-({ \
- register int call __asm__ ("r6") = _call; \
- register int rval __asm__ ("r10"); \
- __asm__ __volatile__ ("trap 31" \
- : "=r" (rval) \
- : "r" (call) \
- : "r11", "memory"); \
- rval; \
-})
-#define V850_SIM_SYSCALL_1(_call, _arg0) \
-({ \
- register int call __asm__ ("r6") = _call; \
- register long arg0 __asm__ ("r7") = (long)_arg0; \
- register int rval __asm__ ("r10"); \
- __asm__ __volatile__ ("trap 31" \
- : "=r" (rval) \
- : "r" (call), "r" (arg0) \
- : "r11", "memory"); \
- rval; \
-})
-#define V850_SIM_SYSCALL_2(_call, _arg0, _arg1) \
-({ \
- register int call __asm__ ("r6") = _call; \
- register long arg0 __asm__ ("r7") = (long)_arg0; \
- register long arg1 __asm__ ("r8") = (long)_arg1; \
- register int rval __asm__ ("r10"); \
- __asm__ __volatile__ ("trap 31" \
- : "=r" (rval) \
- : "r" (call), "r" (arg0), "r" (arg1) \
- : "r11", "memory"); \
- rval; \
-})
-#define V850_SIM_SYSCALL_3(_call, _arg0, _arg1, _arg2) \
-({ \
- register int call __asm__ ("r6") = _call; \
- register long arg0 __asm__ ("r7") = (long)_arg0; \
- register long arg1 __asm__ ("r8") = (long)_arg1; \
- register long arg2 __asm__ ("r9") = (long)_arg2; \
- register int rval __asm__ ("r10"); \
- __asm__ __volatile__ ("trap 31" \
- : "=r" (rval) \
- : "r" (call), "r" (arg0), "r" (arg1), "r" (arg2)\
- : "r11", "memory"); \
- rval; \
-})
-
-#define V850_SIM_SYSCALL(call, args...) \
- V850_SIM_SYS_##call (args)
-
-#endif /* __V850_SIMSYSCALL_H__ */
diff --git a/include/asm-v850/socket.h b/include/asm-v850/socket.h
deleted file mode 100644
index e199a2bf12aa..000000000000
--- a/include/asm-v850/socket.h
+++ /dev/null
@@ -1,57 +0,0 @@
-#ifndef __V850_SOCKET_H__
-#define __V850_SOCKET_H__
-
-#include <asm/sockios.h>
-
-/* For setsockoptions(2) */
-#define SOL_SOCKET 1
-
-#define SO_DEBUG 1
-#define SO_REUSEADDR 2
-#define SO_TYPE 3
-#define SO_ERROR 4
-#define SO_DONTROUTE 5
-#define SO_BROADCAST 6
-#define SO_SNDBUF 7
-#define SO_RCVBUF 8
-#define SO_SNDBUFFORCE 32
-#define SO_RCVBUFFORCE 33
-#define SO_KEEPALIVE 9
-#define SO_OOBINLINE 10
-#define SO_NO_CHECK 11
-#define SO_PRIORITY 12
-#define SO_LINGER 13
-#define SO_BSDCOMPAT 14
-/* To add :#define SO_REUSEPORT 15 */
-#define SO_PASSCRED 16
-#define SO_PEERCRED 17
-#define SO_RCVLOWAT 18
-#define SO_SNDLOWAT 19
-#define SO_RCVTIMEO 20
-#define SO_SNDTIMEO 21
-
-/* Security levels - as per NRL IPv6 - don't actually do anything */
-#define SO_SECURITY_AUTHENTICATION 22
-#define SO_SECURITY_ENCRYPTION_TRANSPORT 23
-#define SO_SECURITY_ENCRYPTION_NETWORK 24
-
-#define SO_BINDTODEVICE 25
-
-/* Socket filtering */
-#define SO_ATTACH_FILTER 26
-#define SO_DETACH_FILTER 27
-
-#define SO_PEERNAME 28
-#define SO_TIMESTAMP 29
-#define SCM_TIMESTAMP SO_TIMESTAMP
-
-#define SO_ACCEPTCONN 30
-
-#define SO_PEERSEC 31
-#define SO_PASSSEC 34
-#define SO_TIMESTAMPNS 35
-#define SCM_TIMESTAMPNS SO_TIMESTAMPNS
-
-#define SO_MARK 36
-
-#endif /* __V850_SOCKET_H__ */
diff --git a/include/asm-v850/sockios.h b/include/asm-v850/sockios.h
deleted file mode 100644
index 823e106e6cd0..000000000000
--- a/include/asm-v850/sockios.h
+++ /dev/null
@@ -1,13 +0,0 @@
-#ifndef __V850_SOCKIOS_H__
-#define __V850_SOCKIOS_H__
-
-/* Socket-level I/O control calls. */
-#define FIOSETOWN 0x8901
-#define SIOCSPGRP 0x8902
-#define FIOGETOWN 0x8903
-#define SIOCGPGRP 0x8904
-#define SIOCATMARK 0x8905
-#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */
-#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */
-
-#endif /* __V850_SOCKIOS_H__ */
diff --git a/include/asm-v850/stat.h b/include/asm-v850/stat.h
deleted file mode 100644
index c68c60d06e2f..000000000000
--- a/include/asm-v850/stat.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * include/asm-v850/stat.h -- v850 stat structure
- *
- * Copyright (C) 2001,02,03 NEC Electronics Corporation
- * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_STAT_H__
-#define __V850_STAT_H__
-
-#include <asm/posix_types.h>
-
-struct stat {
- unsigned int st_dev;
- unsigned long st_ino;
- unsigned int st_mode;
- unsigned int st_nlink;
- unsigned int st_uid;
- unsigned int st_gid;
- unsigned int st_rdev;
- long st_size;
- unsigned long st_blksize;
- unsigned long st_blocks;
- unsigned long st_atime;
- unsigned long __unused1;
- unsigned long st_mtime;
- unsigned long __unused2;
- unsigned long st_ctime;
- unsigned long __unused3;
- unsigned long __unused4;
- unsigned long __unused5;
-};
-
-struct stat64 {
- unsigned long long st_dev;
- unsigned long __unused1;
-
- unsigned long long st_ino;
-
- unsigned int st_mode;
- unsigned int st_nlink;
-
- unsigned int st_uid;
- unsigned int st_gid;
-
- unsigned long long st_rdev;
- unsigned long __unused3;
-
- long long st_size;
- unsigned long st_blksize;
-
- unsigned long st_blocks; /* No. of 512-byte blocks allocated */
- unsigned long __unused4; /* future possible st_blocks high bits */
-
- unsigned long st_atime;
- unsigned long st_atime_nsec;
-
- unsigned long st_mtime;
- unsigned long st_mtime_nsec;
-
- unsigned long st_ctime;
- unsigned long st_ctime_nsec;
-
- unsigned long __unused8;
-};
-
-#endif /* __V850_STAT_H__ */
diff --git a/include/asm-v850/statfs.h b/include/asm-v850/statfs.h
deleted file mode 100644
index ea1596607f26..000000000000
--- a/include/asm-v850/statfs.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __V850_STATFS_H__
-#define __V850_STATFS_H__
-
-#include <asm-generic/statfs.h>
-
-#endif /* __V850_STATFS_H__ */
diff --git a/include/asm-v850/string.h b/include/asm-v850/string.h
deleted file mode 100644
index 478e234789d6..000000000000
--- a/include/asm-v850/string.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * include/asm-v850/string.h -- Architecture specific string routines
- *
- * Copyright (C) 2001,02 NEC Corporation
- * Copyright (C) 2001,02 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_STRING_H__
-#define __V850_STRING_H__
-
-#define __HAVE_ARCH_MEMCPY
-#define __HAVE_ARCH_MEMSET
-#define __HAVE_ARCH_MEMMOVE
-
-extern void *memcpy (void *, const void *, __kernel_size_t);
-extern void *memset (void *, int, __kernel_size_t);
-extern void *memmove (void *, const void *, __kernel_size_t);
-
-#endif /* __V850_STRING_H__ */
diff --git a/include/asm-v850/system.h b/include/asm-v850/system.h
deleted file mode 100644
index 7daf1fdee119..000000000000
--- a/include/asm-v850/system.h
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * include/asm-v850/system.h -- Low-level interrupt/thread ops
- *
- * Copyright (C) 2001,02,03 NEC Electronics Corporation
- * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_SYSTEM_H__
-#define __V850_SYSTEM_H__
-
-#include <linux/linkage.h>
-#include <asm/ptrace.h>
-
-
-/*
- * switch_to(n) should switch tasks to task ptr, first checking that
- * ptr isn't the current task, in which case it does nothing.
- */
-struct thread_struct;
-extern void *switch_thread (struct thread_struct *last,
- struct thread_struct *next);
-#define switch_to(prev,next,last) \
- do { \
- if (prev != next) { \
- (last) = switch_thread (&prev->thread, &next->thread); \
- } \
- } while (0)
-
-
-/* Enable/disable interrupts. */
-#define local_irq_enable() __asm__ __volatile__ ("ei")
-#define local_irq_disable() __asm__ __volatile__ ("di")
-
-#define local_save_flags(flags) \
- __asm__ __volatile__ ("stsr %1, %0" : "=r" (flags) : "i" (SR_PSW))
-#define local_restore_flags(flags) \
- __asm__ __volatile__ ("ldsr %0, %1" :: "r" (flags), "i" (SR_PSW))
-
-/* For spinlocks etc */
-#define local_irq_save(flags) \
- do { local_save_flags (flags); local_irq_disable (); } while (0)
-#define local_irq_restore(flags) \
- local_restore_flags (flags);
-
-
-static inline int irqs_disabled (void)
-{
- unsigned flags;
- local_save_flags (flags);
- return !!(flags & 0x20);
-}
-
-
-/*
- * Force strict CPU ordering.
- * Not really required on v850...
- */
-#define nop() __asm__ __volatile__ ("nop")
-#define mb() __asm__ __volatile__ ("" ::: "memory")
-#define rmb() mb ()
-#define wmb() mb ()
-#define read_barrier_depends() ((void)0)
-#define set_mb(var, value) do { xchg (&var, value); } while (0)
-
-#define smp_mb() mb ()
-#define smp_rmb() rmb ()
-#define smp_wmb() wmb ()
-#define smp_read_barrier_depends() read_barrier_depends()
-
-#define xchg(ptr, with) \
- ((__typeof__ (*(ptr)))__xchg ((unsigned long)(with), (ptr), sizeof (*(ptr))))
-
-static inline unsigned long __xchg (unsigned long with,
- __volatile__ void *ptr, int size)
-{
- unsigned long tmp, flags;
-
- local_irq_save (flags);
-
- switch (size) {
- case 1:
- tmp = *(unsigned char *)ptr;
- *(unsigned char *)ptr = with;
- break;
- case 2:
- tmp = *(unsigned short *)ptr;
- *(unsigned short *)ptr = with;
- break;
- case 4:
- tmp = *(unsigned long *)ptr;
- *(unsigned long *)ptr = with;
- break;
- }
-
- local_irq_restore (flags);
-
- return tmp;
-}
-
-#include <asm-generic/cmpxchg-local.h>
-
-/*
- * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
- * them available.
- */
-#define cmpxchg_local(ptr, o, n) \
- ((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\
- (unsigned long)(n), sizeof(*(ptr))))
-#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
-
-#ifndef CONFIG_SMP
-#include <asm-generic/cmpxchg.h>
-#endif
-
-#define arch_align_stack(x) (x)
-
-#endif /* __V850_SYSTEM_H__ */
diff --git a/include/asm-v850/teg.h b/include/asm-v850/teg.h
deleted file mode 100644
index acc8c7d95329..000000000000
--- a/include/asm-v850/teg.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * include/asm-v850/teg.h -- NB85E-TEG cpu chip
- *
- * Copyright (C) 2001,02,03 NEC Electronics Corporation
- * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_TEG_H__
-#define __V850_TEG_H__
-
-
-/* The TEG uses the V850E cpu core. */
-#include <asm/v850e.h>
-#include <asm/v850e_cache.h>
-
-
-#define CPU_MODEL "v850e/nb85e-teg"
-#define CPU_MODEL_LONG "NEC V850E/NB85E TEG"
-
-
-/* For <asm/entry.h> */
-/* We use on-chip RAM, for a few miscellaneous variables that must be
- accessible using a load instruction relative to R0. On the NB85E/TEG,
- There's 60KB of iRAM starting at 0xFFFF0000, however we need the base
- address to be addressable by a 16-bit signed offset, so we only use the
- second half of it starting from 0xFFFF8000. */
-#define R0_RAM_ADDR 0xFFFF8000
-
-
-/* Hardware-specific interrupt numbers (in the kernel IRQ namespace).
- Some of these are parameterized even though there's only a single
- interrupt, for compatibility with some generic code that works on other
- processor models. */
-#define IRQ_INTCMD(n) 6 /* interval timer interrupt */
-#define IRQ_INTCMD_NUM 1
-#define IRQ_INTSER(n) 16 /* UART reception error */
-#define IRQ_INTSER_NUM 1
-#define IRQ_INTSR(n) 17 /* UART reception completion */
-#define IRQ_INTSR_NUM 1
-#define IRQ_INTST(n) 18 /* UART transmission completion */
-#define IRQ_INTST_NUM 1
-
-/* For <asm/irq.h> */
-#define NUM_CPU_IRQS 64
-
-
-/* TEG UART details. */
-#define V850E_UART_BASE_ADDR(n) (0xFFFFF600 + 0x10 * (n))
-#define V850E_UART_ASIM_ADDR(n) (V850E_UART_BASE_ADDR(n) + 0x0)
-#define V850E_UART_ASIS_ADDR(n) (V850E_UART_BASE_ADDR(n) + 0x2)
-#define V850E_UART_ASIF_ADDR(n) (V850E_UART_BASE_ADDR(n) + 0x4)
-#define V850E_UART_CKSR_ADDR(n) (V850E_UART_BASE_ADDR(n) + 0x6)
-#define V850E_UART_BRGC_ADDR(n) (V850E_UART_BASE_ADDR(n) + 0x8)
-#define V850E_UART_TXB_ADDR(n) (V850E_UART_BASE_ADDR(n) + 0xA)
-#define V850E_UART_RXB_ADDR(n) (V850E_UART_BASE_ADDR(n) + 0xC)
-#define V850E_UART_NUM_CHANNELS 1
-#define V850E_UART_BASE_FREQ CPU_CLOCK_FREQ
-/* This is a function that gets called before configuring the UART. */
-#define V850E_UART_PRE_CONFIGURE teg_uart_pre_configure
-#ifndef __ASSEMBLY__
-extern void teg_uart_pre_configure (unsigned chan,
- unsigned cflags, unsigned baud);
-#endif
-
-
-/* The TEG RTPU. */
-#define V850E_RTPU_BASE_ADDR 0xFFFFF210
-
-
-/* TEG series timer D details. */
-#define V850E_TIMER_D_BASE_ADDR 0xFFFFF210
-#define V850E_TIMER_D_TMCD_BASE_ADDR (V850E_TIMER_D_BASE_ADDR + 0x0)
-#define V850E_TIMER_D_TMD_BASE_ADDR (V850E_TIMER_D_BASE_ADDR + 0x4)
-#define V850E_TIMER_D_CMD_BASE_ADDR (V850E_TIMER_D_BASE_ADDR + 0x8)
-#define V850E_TIMER_D_BASE_FREQ CPU_CLOCK_FREQ
-
-
-/* `Interrupt Source Select' control register. */
-#define TEG_ISS_ADDR 0xFFFFF7FA
-#define TEG_ISS (*(volatile u8 *)TEG_ISS_ADDR)
-
-/* Port 0 I/O register (bits 0-3 used). */
-#define TEG_PORT0_IO_ADDR 0xFFFFF7F2
-#define TEG_PORT0_IO (*(volatile u8 *)TEG_PORT0_IO_ADDR)
-/* Port 0 control register (bits 0-3 control mode, 0 = output, 1 = input). */
-#define TEG_PORT0_PM_ADDR 0xFFFFF7F4
-#define TEG_PORT0_PM (*(volatile u8 *)TEG_PORT0_PM_ADDR)
-
-
-#ifndef __ASSEMBLY__
-extern void teg_init_irqs (void);
-#endif
-
-
-#endif /* __V850_TEG_H__ */
diff --git a/include/asm-v850/termbits.h b/include/asm-v850/termbits.h
deleted file mode 100644
index 295d7bf69451..000000000000
--- a/include/asm-v850/termbits.h
+++ /dev/null
@@ -1,200 +0,0 @@
-#ifndef __V850_TERMBITS_H__
-#define __V850_TERMBITS_H__
-
-#include <linux/posix_types.h>
-
-typedef unsigned char cc_t;
-typedef unsigned int speed_t;
-typedef unsigned int tcflag_t;
-
-#define NCCS 19
-struct termios {
- tcflag_t c_iflag; /* input mode flags */
- tcflag_t c_oflag; /* output mode flags */
- tcflag_t c_cflag; /* control mode flags */
- tcflag_t c_lflag; /* local mode flags */
- cc_t c_line; /* line discipline */
- cc_t c_cc[NCCS]; /* control characters */
-};
-
-struct termios2 {
- tcflag_t c_iflag; /* input mode flags */
- tcflag_t c_oflag; /* output mode flags */
- tcflag_t c_cflag; /* control mode flags */
- tcflag_t c_lflag; /* local mode flags */
- cc_t c_line; /* line discipline */
- cc_t c_cc[NCCS]; /* control characters */
- speed_t c_ispeed; /* input speed */
- speed_t c_ospeed; /* output speed */
-};
-
-struct ktermios {
- tcflag_t c_iflag; /* input mode flags */
- tcflag_t c_oflag; /* output mode flags */
- tcflag_t c_cflag; /* control mode flags */
- tcflag_t c_lflag; /* local mode flags */
- cc_t c_line; /* line discipline */
- cc_t c_cc[NCCS]; /* control characters */
- speed_t c_ispeed; /* input speed */
- speed_t c_ospeed; /* output speed */
-};
-
-/* c_cc characters */
-#define VINTR 0
-#define VQUIT 1
-#define VERASE 2
-#define VKILL 3
-#define VEOF 4
-#define VTIME 5
-#define VMIN 6
-#define VSWTC 7
-#define VSTART 8
-#define VSTOP 9
-#define VSUSP 10
-#define VEOL 11
-#define VREPRINT 12
-#define VDISCARD 13
-#define VWERASE 14
-#define VLNEXT 15
-#define VEOL2 16
-
-
-/* c_iflag bits */
-#define IGNBRK 0000001
-#define BRKINT 0000002
-#define IGNPAR 0000004
-#define PARMRK 0000010
-#define INPCK 0000020
-#define ISTRIP 0000040
-#define INLCR 0000100
-#define IGNCR 0000200
-#define ICRNL 0000400
-#define IUCLC 0001000
-#define IXON 0002000
-#define IXANY 0004000
-#define IXOFF 0010000
-#define IMAXBEL 0020000
-#define IUTF8 0040000
-
-/* c_oflag bits */
-#define OPOST 0000001
-#define OLCUC 0000002
-#define ONLCR 0000004
-#define OCRNL 0000010
-#define ONOCR 0000020
-#define ONLRET 0000040
-#define OFILL 0000100
-#define OFDEL 0000200
-#define NLDLY 0000400
-#define NL0 0000000
-#define NL1 0000400
-#define CRDLY 0003000
-#define CR0 0000000
-#define CR1 0001000
-#define CR2 0002000
-#define CR3 0003000
-#define TABDLY 0014000
-#define TAB0 0000000
-#define TAB1 0004000
-#define TAB2 0010000
-#define TAB3 0014000
-#define XTABS 0014000
-#define BSDLY 0020000
-#define BS0 0000000
-#define BS1 0020000
-#define VTDLY 0040000
-#define VT0 0000000
-#define VT1 0040000
-#define FFDLY 0100000
-#define FF0 0000000
-#define FF1 0100000
-
-/* c_cflag bit meaning */
-#define CBAUD 0010017
-#define B0 0000000 /* hang up */
-#define B50 0000001
-#define B75 0000002
-#define B110 0000003
-#define B134 0000004
-#define B150 0000005
-#define B200 0000006
-#define B300 0000007
-#define B600 0000010
-#define B1200 0000011
-#define B1800 0000012
-#define B2400 0000013
-#define B4800 0000014
-#define B9600 0000015
-#define B19200 0000016
-#define B38400 0000017
-#define EXTA B19200
-#define EXTB B38400
-#define CSIZE 0000060
-#define CS5 0000000
-#define CS6 0000020
-#define CS7 0000040
-#define CS8 0000060
-#define CSTOPB 0000100
-#define CREAD 0000200
-#define PARENB 0000400
-#define PARODD 0001000
-#define HUPCL 0002000
-#define CLOCAL 0004000
-#define CBAUDEX 0010000
-#define BOTHER 0010000
-#define B57600 0010001
-#define B115200 0010002
-#define B230400 0010003
-#define B460800 0010004
-#define B500000 0010005
-#define B576000 0010006
-#define B921600 0010007
-#define B1000000 0010010
-#define B1152000 0010011
-#define B1500000 0010012
-#define B2000000 0010013
-#define B2500000 0010014
-#define B3000000 0010015
-#define B3500000 0010016
-#define B4000000 0010017
-#define CIBAUD 002003600000 /* input baud rate */
-#define CMSPAR 010000000000 /* mark or space (stick) parity */
-#define CRTSCTS 020000000000 /* flow control */
-
-#define IBSHIFT 16 /* Shifr from CBAUD to CIBAUD */
-
-/* c_lflag bits */
-#define ISIG 0000001
-#define ICANON 0000002
-#define XCASE 0000004
-#define ECHO 0000010
-#define ECHOE 0000020
-#define ECHOK 0000040
-#define ECHONL 0000100
-#define NOFLSH 0000200
-#define TOSTOP 0000400
-#define ECHOCTL 0001000
-#define ECHOPRT 0002000
-#define ECHOKE 0004000
-#define FLUSHO 0010000
-#define PENDIN 0040000
-#define IEXTEN 0100000
-
-
-/* tcflow() and TCXONC use these */
-#define TCOOFF 0
-#define TCOON 1
-#define TCIOFF 2
-#define TCION 3
-
-/* tcflush() and TCFLSH use these */
-#define TCIFLUSH 0
-#define TCOFLUSH 1
-#define TCIOFLUSH 2
-
-/* tcsetattr uses these */
-#define TCSANOW 0
-#define TCSADRAIN 1
-#define TCSAFLUSH 2
-
-#endif /* __V850_TERMBITS_H__ */
diff --git a/include/asm-v850/termios.h b/include/asm-v850/termios.h
deleted file mode 100644
index fcd171838d9c..000000000000
--- a/include/asm-v850/termios.h
+++ /dev/null
@@ -1,90 +0,0 @@
-#ifndef __V850_TERMIOS_H__
-#define __V850_TERMIOS_H__
-
-#include <asm/termbits.h>
-#include <asm/ioctls.h>
-
-struct winsize {
- unsigned short ws_row;
- unsigned short ws_col;
- unsigned short ws_xpixel;
- unsigned short ws_ypixel;
-};
-
-#define NCC 8
-struct termio {
- unsigned short c_iflag; /* input mode flags */
- unsigned short c_oflag; /* output mode flags */
- unsigned short c_cflag; /* control mode flags */
- unsigned short c_lflag; /* local mode flags */
- unsigned char c_line; /* line discipline */
- unsigned char c_cc[NCC]; /* control characters */
-};
-
-/* modem lines */
-#define TIOCM_LE 0x001
-#define TIOCM_DTR 0x002
-#define TIOCM_RTS 0x004
-#define TIOCM_ST 0x008
-#define TIOCM_SR 0x010
-#define TIOCM_CTS 0x020
-#define TIOCM_CAR 0x040
-#define TIOCM_RNG 0x080
-#define TIOCM_DSR 0x100
-#define TIOCM_CD TIOCM_CAR
-#define TIOCM_RI TIOCM_RNG
-#define TIOCM_OUT1 0x2000
-#define TIOCM_OUT2 0x4000
-#define TIOCM_LOOP 0x8000
-
-/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
-
-#ifdef __KERNEL__
-
-/* intr=^C quit=^\ erase=del kill=^U
- eof=^D vtime=\0 vmin=\1 sxtc=\0
- start=^Q stop=^S susp=^Z eol=\0
- reprint=^R discard=^U werase=^W lnext=^V
- eol2=\0
-*/
-#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
-
-/*
- * Translate a "termio" structure into a "termios". Ugh.
- */
-#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \
- unsigned short __tmp; \
- get_user(__tmp,&(termio)->x); \
- *(unsigned short *) &(termios)->x = __tmp; \
-}
-
-#define user_termio_to_kernel_termios(termios, termio) \
-({ \
- SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \
- SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \
- SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \
- SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \
- copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
-})
-
-/*
- * Translate a "termios" structure into a "termio". Ugh.
- */
-#define kernel_termios_to_user_termio(termio, termios) \
-({ \
- put_user((termios)->c_iflag, &(termio)->c_iflag); \
- put_user((termios)->c_oflag, &(termio)->c_oflag); \
- put_user((termios)->c_cflag, &(termio)->c_cflag); \
- put_user((termios)->c_lflag, &(termio)->c_lflag); \
- put_user((termios)->c_line, &(termio)->c_line); \
- copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
-})
-
-#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2))
-#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2))
-#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios))
-#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios))
-
-#endif /* __KERNEL__ */
-
-#endif /* __V850_TERMIOS_H__ */
diff --git a/include/asm-v850/thread_info.h b/include/asm-v850/thread_info.h
deleted file mode 100644
index 1a9e6ae0c5fd..000000000000
--- a/include/asm-v850/thread_info.h
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * include/asm-v850/thread_info.h -- v850 low-level thread information
- *
- * Copyright (C) 2002 NEC Corporation
- * Copyright (C) 2002 Miles Bader <miles@gnu.org>
- * Copyright (C) 2002 David Howells (dhowells@redhat.com)
- * - Incorporating suggestions made by Linus Torvalds and Dave Miller
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * This file was derived from the PPC version, include/asm-ppc/thread_info.h
- * which was adapted from the i386 version by Paul Mackerras
- */
-
-#ifndef __V850_THREAD_INFO_H__
-#define __V850_THREAD_INFO_H__
-
-#ifdef __KERNEL__
-
-#ifndef __ASSEMBLY__
-
-/*
- * low level task data.
- * If you change this, change the TI_* offsets below to match.
- */
-struct thread_info {
- struct task_struct *task; /* main task structure */
- struct exec_domain *exec_domain; /* execution domain */
- unsigned long flags; /* low level flags */
- int cpu; /* cpu we're on */
- int preempt_count; /* 0 => preemptable,
- <0 => BUG */
- struct restart_block restart_block;
-};
-
-#define INIT_THREAD_INFO(tsk) \
-{ \
- .task = &tsk, \
- .exec_domain = &default_exec_domain, \
- .flags = 0, \
- .cpu = 0, \
- .preempt_count = 1, \
- .restart_block = { \
- .fn = do_no_restart_syscall, \
- }, \
-}
-
-#define init_thread_info (init_thread_union.thread_info)
-#define init_stack (init_thread_union.stack)
-
-/*
- * macros/functions for gaining access to the thread information structure
- */
-
-/* thread information allocation */
-#define alloc_thread_info(tsk) ((struct thread_info *) \
- __get_free_pages(GFP_KERNEL, 1))
-#define free_thread_info(ti) free_pages((unsigned long) (ti), 1)
-
-#endif /* __ASSEMBLY__ */
-
-
-/*
- * Offsets in thread_info structure, used in assembly code
- */
-#define TI_TASK 0
-#define TI_EXECDOMAIN 4
-#define TI_FLAGS 8
-#define TI_CPU 12
-#define TI_PREEMPT 16
-
-#define PREEMPT_ACTIVE 0x4000000
-
-/*
- * thread information flag bit numbers
- */
-#define TIF_SYSCALL_TRACE 0 /* syscall trace active */
-#define TIF_SIGPENDING 1 /* signal pending */
-#define TIF_NEED_RESCHED 2 /* rescheduling necessary */
-#define TIF_POLLING_NRFLAG 3 /* true if poll_idle() is polling
- TIF_NEED_RESCHED */
-#define TIF_MEMDIE 4
-
-/* as above, but as bit values */
-#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE)
-#define _TIF_SIGPENDING (1<<TIF_SIGPENDING)
-#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED)
-#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
-
-
-/* Size of kernel stack for each process. */
-#define THREAD_SIZE 0x2000
-
-/* The alignment of kernel threads, with thread_info structures at their
- base. Thus, a pointer for a task's task structure can be derived from
- its kernel stack pointer. */
-#define THREAD_ALIGNMENT THREAD_SIZE
-#define THREAD_MASK (-THREAD_ALIGNMENT)
-
-
-#ifdef __ASSEMBLY__
-
-/* Put a pointer to the current thread_info structure into REG. Note that
- this definition requires THREAD_MASK to be representable as a signed
- 16-bit value. */
-#define GET_CURRENT_THREAD(reg) \
- /* Use `addi' and then `and' instead of just `andi', because \
- `addi' sign-extends the immediate value, whereas `andi' \
- zero-extends it. */ \
- addi THREAD_MASK, r0, reg; \
- and sp, reg
-
-#else
-
-/* Return a pointer to the current thread_info structure. */
-static inline struct thread_info *current_thread_info (void)
-{
- register unsigned long sp __asm__ ("sp");
- return (struct thread_info *)(sp & THREAD_MASK);
-}
-
-#endif /* __ASSEMBLY__ */
-
-
-#endif /* __KERNEL__ */
-
-#endif /* __V850_THREAD_INFO_H__ */
diff --git a/include/asm-v850/timex.h b/include/asm-v850/timex.h
deleted file mode 100644
index 6279e5a0ee8e..000000000000
--- a/include/asm-v850/timex.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * linux/include/asm-v850/timex.h
- *
- * v850 architecture timex specifications
- */
-#ifndef __V850_TIMEX_H__
-#define __V850_TIMEX_H__
-
-#define CLOCK_TICK_RATE 1193180 /* Underlying HZ */
-
-typedef unsigned long cycles_t;
-
-static inline cycles_t get_cycles(void)
-{
- return 0;
-}
-
-#endif /* __V850_TIMEX_H__ */
diff --git a/include/asm-v850/tlb.h b/include/asm-v850/tlb.h
deleted file mode 100644
index 73bc9ead40dd..000000000000
--- a/include/asm-v850/tlb.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * include/asm-v850/tlb.h
- *
- * Copyright (C) 2002 NEC Corporation
- * Copyright (C) 2002 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_TLB_H__
-#define __V850_TLB_H__
-
-#define tlb_flush(tlb) ((void)0)
-
-#include <asm-generic/tlb.h>
-
-#endif /* __V850_TLB_H__ */
diff --git a/include/asm-v850/tlbflush.h b/include/asm-v850/tlbflush.h
deleted file mode 100644
index c44aa64449c8..000000000000
--- a/include/asm-v850/tlbflush.h
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * include/asm-v850/tlbflush.h
- *
- * Copyright (C) 2001,02,03 NEC Electronics Corporation
- * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_TLBFLUSH_H__
-#define __V850_TLBFLUSH_H__
-
-#include <asm/machdep.h>
-
-
-/*
- * flush all user-space atc entries.
- */
-static inline void __flush_tlb(void)
-{
- BUG ();
-}
-
-static inline void __flush_tlb_one(unsigned long addr)
-{
- BUG ();
-}
-
-#define flush_tlb() __flush_tlb()
-
-/*
- * flush all atc entries (both kernel and user-space entries).
- */
-static inline void flush_tlb_all(void)
-{
- BUG ();
-}
-
-static inline void flush_tlb_mm(struct mm_struct *mm)
-{
- BUG ();
-}
-
-static inline void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
-{
- BUG ();
-}
-
-static inline void flush_tlb_range(struct vm_area_struct *vma,
- unsigned long start, unsigned long end)
-{
- BUG ();
-}
-
-static inline void flush_tlb_kernel_page(unsigned long addr)
-{
- BUG ();
-}
-
-#endif /* __V850_TLBFLUSH_H__ */
diff --git a/include/asm-v850/topology.h b/include/asm-v850/topology.h
deleted file mode 100644
index 6040e41d7945..000000000000
--- a/include/asm-v850/topology.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __V850_TOPOLOGY_H__
-#define __V850_TOPOLOGY_H__
-
-#include <asm-generic/topology.h>
-
-#endif /* __V850_TOPOLOGY_H__ */
diff --git a/include/asm-v850/types.h b/include/asm-v850/types.h
deleted file mode 100644
index 89f735ee41dd..000000000000
--- a/include/asm-v850/types.h
+++ /dev/null
@@ -1,36 +0,0 @@
-#ifndef __V850_TYPES_H__
-#define __V850_TYPES_H__
-
-#ifndef __ASSEMBLY__
-
-/*
- * This file is never included by application software unless
- * explicitly requested (e.g., via linux/types.h) in which case the
- * application is Linux specific so (user-) name space pollution is
- * not a major issue. However, for interoperability, libraries still
- * need to be careful to avoid a name clashes.
- */
-#include <asm-generic/int-ll64.h>
-
-typedef unsigned short umode_t;
-
-#endif /* !__ASSEMBLY__ */
-
-/*
- * These aren't exported outside the kernel to avoid name space clashes
- */
-#ifdef __KERNEL__
-
-#define BITS_PER_LONG 32
-
-#ifndef __ASSEMBLY__
-
-/* Dma addresses are 32-bits wide. */
-
-typedef u32 dma_addr_t;
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* __KERNEL__ */
-
-#endif /* __V850_TYPES_H__ */
diff --git a/include/asm-v850/uaccess.h b/include/asm-v850/uaccess.h
deleted file mode 100644
index 64563c409bb2..000000000000
--- a/include/asm-v850/uaccess.h
+++ /dev/null
@@ -1,159 +0,0 @@
-#ifndef __V850_UACCESS_H__
-#define __V850_UACCESS_H__
-
-/*
- * User space memory access functions
- */
-
-#include <linux/errno.h>
-#include <linux/string.h>
-
-#include <asm/segment.h>
-#include <asm/machdep.h>
-
-#define VERIFY_READ 0
-#define VERIFY_WRITE 1
-
-static inline int access_ok (int type, const void *addr, unsigned long size)
-{
- /* XXX I guess we should check against real ram bounds at least, and
- possibly make sure ADDR is not within the kernel.
- For now we just check to make sure it's not a small positive
- or negative value, as that will at least catch some kinds of
- error. In particular, we make sure that ADDR's not within the
- interrupt vector area, which we know starts at zero, or within the
- peripheral-I/O area, which is located just _before_ zero. */
- unsigned long val = (unsigned long)addr;
- return val >= (0x80 + NUM_CPU_IRQS*16) && val < 0xFFFFF000;
-}
-
-/*
- * The exception table consists of pairs of addresses: the first is the
- * address of an instruction that is allowed to fault, and the second is
- * the address at which the program should continue. No registers are
- * modified, so it is entirely up to the continuation code to figure out
- * what to do.
- *
- * All the routines below use bits of fixup code that are out of line
- * with the main instruction path. This means when everything is well,
- * we don't even have to jump over them. Further, they do not intrude
- * on our cache or tlb entries.
- */
-
-struct exception_table_entry
-{
- unsigned long insn, fixup;
-};
-
-/* Returns 0 if exception not found and fixup otherwise. */
-extern unsigned long search_exception_table (unsigned long);
-
-
-/*
- * These are the main single-value transfer routines. They automatically
- * use the right size if we just have the right pointer type.
- */
-
-extern int bad_user_access_length (void);
-
-#define __get_user(var, ptr) \
- ({ \
- int __gu_err = 0; \
- typeof(*(ptr)) __gu_val = 0; \
- switch (sizeof (*(ptr))) { \
- case 1: \
- case 2: \
- case 4: \
- __gu_val = *(ptr); \
- break; \
- case 8: \
- memcpy(&__gu_val, ptr, sizeof(__gu_val)); \
- break; \
- default: \
- __gu_val = 0; \
- __gu_err = __get_user_bad (); \
- break; \
- } \
- (var) = __gu_val; \
- __gu_err; \
- })
-#define __get_user_bad() (bad_user_access_length (), (-EFAULT))
-
-#define __put_user(var, ptr) \
- ({ \
- int __pu_err = 0; \
- switch (sizeof (*(ptr))) { \
- case 1: \
- case 2: \
- case 4: \
- *(ptr) = (var); \
- break; \
- case 8: { \
- typeof(*(ptr)) __pu_val = 0; \
- memcpy(ptr, &__pu_val, sizeof(__pu_val)); \
- } \
- break; \
- default: \
- __pu_err = __put_user_bad (); \
- break; \
- } \
- __pu_err; \
- })
-#define __put_user_bad() (bad_user_access_length (), (-EFAULT))
-
-#define put_user(x, ptr) __put_user(x, ptr)
-#define get_user(x, ptr) __get_user(x, ptr)
-
-#define __copy_from_user(to, from, n) (memcpy (to, from, n), 0)
-#define __copy_to_user(to, from, n) (memcpy(to, from, n), 0)
-
-#define __copy_to_user_inatomic __copy_to_user
-#define __copy_from_user_inatomic __copy_from_user
-
-#define copy_from_user(to, from, n) __copy_from_user (to, from, n)
-#define copy_to_user(to, from, n) __copy_to_user(to, from, n)
-
-#define copy_to_user_ret(to,from,n,retval) \
- ({ if (copy_to_user (to,from,n)) return retval; })
-
-#define copy_from_user_ret(to,from,n,retval) \
- ({ if (copy_from_user (to,from,n)) return retval; })
-
-/*
- * Copy a null terminated string from userspace.
- */
-
-static inline long
-strncpy_from_user (char *dst, const char *src, long count)
-{
- char *tmp;
- strncpy (dst, src, count);
- for (tmp = dst; *tmp && count > 0; tmp++, count--)
- ;
- return tmp - dst;
-}
-
-/*
- * Return the size of a string (including the ending 0)
- *
- * Return 0 on exception, a value greater than N if too long
- */
-static inline long strnlen_user (const char *src, long n)
-{
- return strlen (src) + 1;
-}
-
-#define strlen_user(str) strnlen_user (str, 32767)
-
-/*
- * Zero Userspace
- */
-
-static inline unsigned long
-clear_user (void *to, unsigned long n)
-{
- memset (to, 0, n);
- return 0;
-}
-
-#endif /* __V850_UACCESS_H__ */
diff --git a/include/asm-v850/ucontext.h b/include/asm-v850/ucontext.h
deleted file mode 100644
index 303c21590cff..000000000000
--- a/include/asm-v850/ucontext.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef __V850_UCONTEXT_H__
-#define __V850_UCONTEXT_H__
-
-#include <asm/sigcontext.h>
-
-struct ucontext {
- unsigned long uc_flags;
- struct ucontext *uc_link;
- stack_t uc_stack;
- struct sigcontext uc_mcontext;
- sigset_t uc_sigmask; /* mask last for extensibility */
-};
-
-#endif /* __V850_UCONTEXT_H__ */
diff --git a/include/asm-v850/unaligned.h b/include/asm-v850/unaligned.h
deleted file mode 100644
index 53122b28491e..000000000000
--- a/include/asm-v850/unaligned.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright (C) 2001 NEC Corporation
- * Copyright (C) 2001 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Note that some v850 chips support unaligned access, but it seems too
- * annoying to use.
- */
-#ifndef _ASM_V850_UNALIGNED_H
-#define _ASM_V850_UNALIGNED_H
-
-#include <linux/unaligned/be_byteshift.h>
-#include <linux/unaligned/le_byteshift.h>
-#include <linux/unaligned/generic.h>
-
-#define get_unaligned __get_unaligned_le
-#define put_unaligned __put_unaligned_le
-
-#endif /* _ASM_V850_UNALIGNED_H */
diff --git a/include/asm-v850/unistd.h b/include/asm-v850/unistd.h
deleted file mode 100644
index 2241ed45ecfe..000000000000
--- a/include/asm-v850/unistd.h
+++ /dev/null
@@ -1,244 +0,0 @@
-/*
- * include/asm-v850/unistd.h -- System call numbers and invocation mechanism
- *
- * Copyright (C) 2001,02,03,04 NEC Electronics Corporation
- * Copyright (C) 2001,02,03,04 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_UNISTD_H__
-#define __V850_UNISTD_H__
-
-#define __NR_restart_syscall 0
-#define __NR_exit 1
-#define __NR_fork 2
-#define __NR_read 3
-#define __NR_write 4
-#define __NR_open 5
-#define __NR_close 6
-#define __NR_waitpid 7
-#define __NR_creat 8
-#define __NR_link 9
-#define __NR_unlink 10
-#define __NR_execve 11
-#define __NR_chdir 12
-#define __NR_time 13
-#define __NR_mknod 14
-#define __NR_chmod 15
-#define __NR_chown 16
-#define __NR_break 17
-#define __NR_lseek 19
-#define __NR_getpid 20
-#define __NR_mount 21
-#define __NR_umount 22
-#define __NR_setuid 23
-#define __NR_getuid 24
-#define __NR_stime 25
-#define __NR_ptrace 26
-#define __NR_alarm 27
-#define __NR_pause 29
-#define __NR_utime 30
-#define __NR_stty 31
-#define __NR_gtty 32
-#define __NR_access 33
-#define __NR_nice 34
-#define __NR_ftime 35
-#define __NR_sync 36
-#define __NR_kill 37
-#define __NR_rename 38
-#define __NR_mkdir 39
-#define __NR_rmdir 40
-#define __NR_dup 41
-#define __NR_pipe 42
-#define __NR_times 43
-#define __NR_prof 44
-#define __NR_brk 45
-#define __NR_setgid 46
-#define __NR_getgid 47
-#define __NR_signal 48
-#define __NR_geteuid 49
-#define __NR_getegid 50
-#define __NR_acct 51
-#define __NR_umount2 52
-#define __NR_lock 53
-#define __NR_ioctl 54
-#define __NR_fcntl 55
-#define __NR_setpgid 57
-#define __NR_umask 60
-#define __NR_chroot 61
-#define __NR_ustat 62
-#define __NR_dup2 63
-#define __NR_getppid 64
-#define __NR_getpgrp 65
-#define __NR_setsid 66
-#define __NR_sigaction 67
-#define __NR_sgetmask 68
-#define __NR_ssetmask 69
-#define __NR_setreuid 70
-#define __NR_setregid 71
-#define __NR_sigsuspend 72
-#define __NR_sigpending 73
-#define __NR_sethostname 74
-#define __NR_setrlimit 75
-#define __NR_ugetrlimit 76
-#define __NR_getrusage 77
-#define __NR_gettimeofday 78
-#define __NR_settimeofday 79
-#define __NR_getgroups 80
-#define __NR_setgroups 81
-#define __NR_select 82
-#define __NR_symlink 83
-#define __NR_readlink 85
-#define __NR_uselib 86
-#define __NR_swapon 87
-#define __NR_reboot 88
-#define __NR_readdir 89
-#define __NR_mmap 90
-#define __NR_munmap 91
-#define __NR_truncate 92
-#define __NR_ftruncate 93
-#define __NR_fchmod 94
-#define __NR_fchown 95
-#define __NR_getpriority 96
-#define __NR_setpriority 97
-#define __NR_profil 98
-#define __NR_statfs 99
-#define __NR_fstatfs 100
-#define __NR_socketcall 102
-#define __NR_syslog 103
-#define __NR_setitimer 104
-#define __NR_getitimer 105
-#define __NR_stat 106
-#define __NR_lstat 107
-#define __NR_fstat 108
-#define __NR_vhangup 111
-#define __NR_wait4 114
-#define __NR_swapoff 115
-#define __NR_sysinfo 116
-#define __NR_ipc 117
-#define __NR_fsync 118
-#define __NR_sigreturn 119
-#define __NR_clone 120
-#define __NR_setdomainname 121
-#define __NR_uname 122
-#define __NR_cacheflush 123
-#define __NR_adjtimex 124
-#define __NR_mprotect 125
-#define __NR_sigprocmask 126
-#define __NR_create_module 127
-#define __NR_init_module 128
-#define __NR_delete_module 129
-#define __NR_get_kernel_syms 130
-#define __NR_quotactl 131
-#define __NR_getpgid 132
-#define __NR_fchdir 133
-#define __NR_bdflush 134
-#define __NR_sysfs 135
-#define __NR_personality 136
-#define __NR_afs_syscall 137 /* Syscall for Andrew File System */
-#define __NR_setfsuid 138
-#define __NR_setfsgid 139
-#define __NR__llseek 140
-#define __NR_getdents 141
-#define __NR_flock 143
-#define __NR_msync 144
-#define __NR_readv 145
-#define __NR_writev 146
-#define __NR_getsid 147
-#define __NR_fdatasync 148
-#define __NR__sysctl 149
-#define __NR_mlock 150
-#define __NR_munlock 151
-#define __NR_mlockall 152
-#define __NR_munlockall 153
-#define __NR_sched_setparam 154
-#define __NR_sched_getparam 155
-#define __NR_sched_setscheduler 156
-#define __NR_sched_getscheduler 157
-#define __NR_sched_yield 158
-#define __NR_sched_get_priority_max 159
-#define __NR_sched_get_priority_min 160
-#define __NR_sched_rr_get_interval 161
-#define __NR_nanosleep 162
-#define __NR_mremap 163
-#define __NR_setresuid 164
-#define __NR_getresuid 165
-#define __NR_query_module 167
-#define __NR_poll 168
-#define __NR_nfsservctl 169
-#define __NR_setresgid 170
-#define __NR_getresgid 171
-#define __NR_prctl 172
-#define __NR_rt_sigreturn 173
-#define __NR_rt_sigaction 174
-#define __NR_rt_sigprocmask 175
-#define __NR_rt_sigpending 176
-#define __NR_rt_sigtimedwait 177
-#define __NR_rt_sigqueueinfo 178
-#define __NR_rt_sigsuspend 179
-#define __NR_pread 180
-#define __NR_pwrite 181
-#define __NR_lchown 182
-#define __NR_getcwd 183
-#define __NR_capget 184
-#define __NR_capset 185
-#define __NR_sigaltstack 186
-#define __NR_sendfile 187
-#define __NR_getpmsg 188 /* some people actually want streams */
-#define __NR_putpmsg 189 /* some people actually want streams */
-#define __NR_vfork 190
-#define __NR_mmap2 192
-#define __NR_truncate64 193
-#define __NR_ftruncate64 194
-#define __NR_stat64 195
-#define __NR_lstat64 196
-#define __NR_fstat64 197
-#define __NR_fcntl64 198
-#define __NR_getdents64 199
-#define __NR_pivot_root 200
-#define __NR_gettid 201
-#define __NR_tkill 202
-
-#ifdef __KERNEL__
-
-#define __ARCH_WANT_IPC_PARSE_VERSION
-#define __ARCH_WANT_OLD_READDIR
-#define __ARCH_WANT_STAT64
-#define __ARCH_WANT_SYS_ALARM
-#define __ARCH_WANT_SYS_GETHOSTNAME
-#define __ARCH_WANT_SYS_PAUSE
-#define __ARCH_WANT_SYS_SGETMASK
-#define __ARCH_WANT_SYS_SIGNAL
-#define __ARCH_WANT_SYS_TIME
-#define __ARCH_WANT_SYS_UTIME
-#define __ARCH_WANT_SYS_WAITPID
-#define __ARCH_WANT_SYS_SOCKETCALL
-#define __ARCH_WANT_SYS_FADVISE64
-#define __ARCH_WANT_SYS_GETPGRP
-#define __ARCH_WANT_SYS_LLSEEK
-#define __ARCH_WANT_SYS_NICE
-#define __ARCH_WANT_SYS_OLDUMOUNT
-#define __ARCH_WANT_SYS_SIGPENDING
-#define __ARCH_WANT_SYS_SIGPROCMASK
-#define __ARCH_WANT_SYS_RT_SIGACTION
-
-/*
- * "Conditional" syscalls
- */
-#define cond_syscall(name) \
- asm (".weak\t" C_SYMBOL_STRING(name) ";" \
- ".set\t" C_SYMBOL_STRING(name) "," C_SYMBOL_STRING(sys_ni_syscall))
-#if 0
-/* This doesn't work if there's a function prototype for NAME visible,
- because the argument types probably won't match. */
-#define cond_syscall(name) \
- void name (void) __attribute__ ((weak, alias ("sys_ni_syscall")));
-#endif
-
-#endif /* __KERNEL__ */
-#endif /* __V850_UNISTD_H__ */
diff --git a/include/asm-v850/user.h b/include/asm-v850/user.h
deleted file mode 100644
index 63cdc567d272..000000000000
--- a/include/asm-v850/user.h
+++ /dev/null
@@ -1,52 +0,0 @@
-#ifndef __V850_USER_H__
-#define __V850_USER_H__
-
-/* Adapted from <asm-ppc/user.h>. */
-
-#include <linux/ptrace.h>
-#include <asm/page.h>
-
-/*
- * Core file format: The core file is written in such a way that gdb
- * can understand it and provide useful information to the user (under
- * linux we use the `trad-core' bfd, NOT the osf-core). The file contents
- * are as follows:
- *
- * upage: 1 page consisting of a user struct that tells gdb
- * what is present in the file. Directly after this is a
- * copy of the task_struct, which is currently not used by gdb,
- * but it may come in handy at some point. All of the registers
- * are stored as part of the upage. The upage should always be
- * only one page long.
- * data: The data segment follows next. We use current->end_text to
- * current->brk to pick up all of the user variables, plus any memory
- * that may have been sbrk'ed. No attempt is made to determine if a
- * page is demand-zero or if a page is totally unused, we just cover
- * the entire range. All of the addresses are rounded in such a way
- * that an integral number of pages is written.
- * stack: We need the stack information in order to get a meaningful
- * backtrace. We need to write the data from usp to
- * current->start_stack, so we round each of these in order to be able
- * to write an integer number of pages.
- */
-struct user {
- struct pt_regs regs; /* entire machine state */
- size_t u_tsize; /* text size (pages) */
- size_t u_dsize; /* data size (pages) */
- size_t u_ssize; /* stack size (pages) */
- unsigned long start_code; /* text starting address */
- unsigned long start_data; /* data starting address */
- unsigned long start_stack; /* stack starting address */
- long int signal; /* signal causing core dump */
- unsigned long u_ar0; /* help gdb find registers */
- unsigned long magic; /* identifies a core file */
- char u_comm[32]; /* user command name */
-};
-
-#define NBPG PAGE_SIZE
-#define UPAGES 1
-#define HOST_TEXT_START_ADDR (u.start_code)
-#define HOST_DATA_START_ADDR (u.start_data)
-#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG)
-
-#endif /* __V850_USER_H__ */
diff --git a/include/asm-v850/v850e.h b/include/asm-v850/v850e.h
deleted file mode 100644
index 5a222eb5117f..000000000000
--- a/include/asm-v850/v850e.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * include/asm-v850/v850e.h -- V850E CPU
- *
- * Copyright (C) 2001,02,03 NEC Electronics Corporation
- * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_V850E_H__
-#define __V850_V850E_H__
-
-#include <asm/v850e_intc.h>
-
-#define CPU_ARCH "v850e"
-
-#endif /* __V850_V850E_H__ */
diff --git a/include/asm-v850/v850e2.h b/include/asm-v850/v850e2.h
deleted file mode 100644
index 48680408ab7e..000000000000
--- a/include/asm-v850/v850e2.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * include/asm-v850/v850e2.h -- Machine-dependent defs for V850E2 CPUs
- *
- * Copyright (C) 2002,03 NEC Electronics Corporation
- * Copyright (C) 2002,03 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_V850E2_H__
-#define __V850_V850E2_H__
-
-#include <asm/v850e_intc.h> /* v850e-style interrupt system. */
-
-
-#define CPU_ARCH "v850e2"
-
-
-/* Control registers. */
-
-/* Chip area select control */
-#define V850E2_CSC_ADDR(n) (0xFFFFF060 + (n) * 2)
-#define V850E2_CSC(n) (*(volatile u16 *)V850E2_CSC_ADDR(n))
-/* I/O area select control */
-#define V850E2_BPC_ADDR 0xFFFFF064
-#define V850E2_BPC (*(volatile u16 *)V850E2_BPC_ADDR)
-/* Bus size configuration */
-#define V850E2_BSC_ADDR 0xFFFFF066
-#define V850E2_BSC (*(volatile u16 *)V850E2_BSC_ADDR)
-/* Endian configuration */
-#define V850E2_BEC_ADDR 0xFFFFF068
-#define V850E2_BEC (*(volatile u16 *)V850E2_BEC_ADDR)
-/* Cache configuration */
-#define V850E2_BHC_ADDR 0xFFFFF06A
-#define V850E2_BHC (*(volatile u16 *)V850E2_BHC_ADDR)
-/* NPB strobe-wait configuration */
-#define V850E2_VSWC_ADDR 0xFFFFF06E
-#define V850E2_VSWC (*(volatile u16 *)V850E2_VSWC_ADDR)
-/* Bus cycle type */
-#define V850E2_BCT_ADDR(n) (0xFFFFF480 + (n) * 2)
-#define V850E2_BCT(n) (*(volatile u16 *)V850E2_BCT_ADDR(n))
-/* Data wait control */
-#define V850E2_DWC_ADDR(n) (0xFFFFF484 + (n) * 2)
-#define V850E2_DWC(n) (*(volatile u16 *)V850E2_DWC_ADDR(n))
-/* Bus cycle control */
-#define V850E2_BCC_ADDR 0xFFFFF488
-#define V850E2_BCC (*(volatile u16 *)V850E2_BCC_ADDR)
-/* Address wait control */
-#define V850E2_ASC_ADDR 0xFFFFF48A
-#define V850E2_ASC (*(volatile u16 *)V850E2_ASC_ADDR)
-/* Local bus sizing control */
-#define V850E2_LBS_ADDR 0xFFFFF48E
-#define V850E2_LBS (*(volatile u16 *)V850E2_LBS_ADDR)
-/* Line buffer control */
-#define V850E2_LBC_ADDR(n) (0xFFFFF490 + (n) * 2)
-#define V850E2_LBC(n) (*(volatile u16 *)V850E2_LBC_ADDR(n))
-/* SDRAM configuration */
-#define V850E2_SCR_ADDR(n) (0xFFFFF4A0 + (n) * 4)
-#define V850E2_SCR(n) (*(volatile u16 *)V850E2_SCR_ADDR(n))
-/* SDRAM refresh cycle control */
-#define V850E2_RFS_ADDR(n) (0xFFFFF4A2 + (n) * 4)
-#define V850E2_RFS(n) (*(volatile u16 *)V850E2_RFS_ADDR(n))
-
-
-#endif /* __V850_V850E2_H__ */
diff --git a/include/asm-v850/v850e2_cache.h b/include/asm-v850/v850e2_cache.h
deleted file mode 100644
index 87edf0d311d5..000000000000
--- a/include/asm-v850/v850e2_cache.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * include/asm-v850/v850e2_cache_cache.h -- Cache control for V850E2
- * cache memories
- *
- * Copyright (C) 2003,05 NEC Electronics Corporation
- * Copyright (C) 2003,05 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_V850E2_CACHE_H__
-#define __V850_V850E2_CACHE_H__
-
-#include <asm/types.h>
-
-
-/* Cache control registers. */
-
-/* Bus Transaction Control */
-#define V850E2_CACHE_BTSC_ADDR 0xFFFFF070
-#define V850E2_CACHE_BTSC (*(volatile u16 *)V850E2_CACHE_BTSC_ADDR)
-#define V850E2_CACHE_BTSC_ICM 0x0001 /* icache enable */
-#define V850E2_CACHE_BTSC_DCM0 0x0004 /* dcache enable, bit 0 */
-#define V850E2_CACHE_BTSC_DCM1 0x0008 /* dcache enable, bit 1 */
-#define V850E2_CACHE_BTSC_DCM_WT /* write-through */ \
- V850E2_CACHE_BTSC_DCM0
-#ifdef CONFIG_V850E2_V850E2S
-# define V850E2_CACHE_BTSC_DCM_WB_NO_ALLOC /* write-back, non-alloc */ \
- V850E2_CACHE_BTSC_DCM1
-# define V850E2_CACHE_BTSC_DCM_WB_ALLOC /* write-back, non-alloc */ \
- (V850E2_CACHE_BTSC_DCM1 | V850E2_CACHE_BTSC_DCM0)
-# define V850E2_CACHE_BTSC_ISEQ 0x0010 /* icache `address sequence mode' */
-# define V850E2_CACHE_BTSC_DSEQ 0x0020 /* dcache `address sequence mode' */
-# define V850E2_CACHE_BTSC_IRFC 0x0030
-# define V850E2_CACHE_BTSC_ILCD 0x4000
-# define V850E2_CACHE_BTSC_VABE 0x8000
-#endif /* CONFIG_V850E2_V850E2S */
-
-/* Cache operation start address register (low-bits). */
-#define V850E2_CACHE_CADL_ADDR 0xFFFFF074
-#define V850E2_CACHE_CADL (*(volatile u16 *)V850E2_CACHE_CADL_ADDR)
-/* Cache operation start address register (high-bits). */
-#define V850E2_CACHE_CADH_ADDR 0xFFFFF076
-#define V850E2_CACHE_CADH (*(volatile u16 *)V850E2_CACHE_CADH_ADDR)
-/* Cache operation count register. */
-#define V850E2_CACHE_CCNT_ADDR 0xFFFFF078
-#define V850E2_CACHE_CCNT (*(volatile u16 *)V850E2_CACHE_CCNT_ADDR)
-/* Cache operation specification register. */
-#define V850E2_CACHE_COPR_ADDR 0xFFFFF07A
-#define V850E2_CACHE_COPR (*(volatile u16 *)V850E2_CACHE_COPR_ADDR)
-#define V850E2_CACHE_COPR_STRT 0x0001 /* start cache operation */
-#define V850E2_CACHE_COPR_LBSL 0x0100 /* 0 = icache, 1 = dcache */
-#define V850E2_CACHE_COPR_WSLE 0x0200 /* operate on cache way */
-#define V850E2_CACHE_COPR_WSL(way) ((way) * 0x0400) /* way select */
-#define V850E2_CACHE_COPR_CFC(op) ((op) * 0x1000) /* cache function code */
-
-
-/* Size of a cache line in bytes. */
-#define V850E2_CACHE_LINE_SIZE_BITS 4
-#define V850E2_CACHE_LINE_SIZE (1 << V850E2_CACHE_LINE_SIZE_BITS)
-
-/* The size of each cache `way' in lines. */
-#define V850E2_CACHE_WAY_SIZE 256
-
-
-/* For <asm/cache.h> */
-#define L1_CACHE_BYTES V850E2_CACHE_LINE_SIZE
-#define L1_CACHE_SHIFT V850E2_CACHE_LINE_SIZE_BITS
-
-
-#endif /* __V850_V850E2_CACHE_H__ */
diff --git a/include/asm-v850/v850e_cache.h b/include/asm-v850/v850e_cache.h
deleted file mode 100644
index aa7d7eb9da50..000000000000
--- a/include/asm-v850/v850e_cache.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * include/asm-v850/v850e_cache.h -- Cache control for V850E cache memories
- *
- * Copyright (C) 2001,03 NEC Electronics Corporation
- * Copyright (C) 2001,03 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-/* This file implements cache control for the rather simple cache used on
- some V850E CPUs, specifically the NB85E/TEG CPU-core and the V850E/ME2
- CPU. V850E2 processors have their own (better) cache
- implementation. */
-
-#ifndef __V850_V850E_CACHE_H__
-#define __V850_V850E_CACHE_H__
-
-#include <asm/types.h>
-
-
-/* Cache control registers. */
-#define V850E_CACHE_BHC_ADDR 0xFFFFF06A
-#define V850E_CACHE_BHC (*(volatile u16 *)V850E_CACHE_BHC_ADDR)
-#define V850E_CACHE_ICC_ADDR 0xFFFFF070
-#define V850E_CACHE_ICC (*(volatile u16 *)V850E_CACHE_ICC_ADDR)
-#define V850E_CACHE_ISI_ADDR 0xFFFFF072
-#define V850E_CACHE_ISI (*(volatile u16 *)V850E_CACHE_ISI_ADDR)
-#define V850E_CACHE_DCC_ADDR 0xFFFFF078
-#define V850E_CACHE_DCC (*(volatile u16 *)V850E_CACHE_DCC_ADDR)
-
-/* Size of a cache line in bytes. */
-#define V850E_CACHE_LINE_SIZE 16
-
-/* For <asm/cache.h> */
-#define L1_CACHE_BYTES V850E_CACHE_LINE_SIZE
-
-
-#if defined(__KERNEL__) && !defined(__ASSEMBLY__)
-/* Set caching params via the BHC, ICC, and DCC registers. */
-void v850e_cache_enable (u16 bhc, u16 icc, u16 dcc);
-#endif /* __KERNEL__ && !__ASSEMBLY__ */
-
-
-#endif /* __V850_V850E_CACHE_H__ */
diff --git a/include/asm-v850/v850e_intc.h b/include/asm-v850/v850e_intc.h
deleted file mode 100644
index 6fdf95708317..000000000000
--- a/include/asm-v850/v850e_intc.h
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * include/asm-v850/v850e_intc.h -- V850E CPU interrupt controller (INTC)
- *
- * Copyright (C) 2001,02,03 NEC Electronics Corporation
- * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_V850E_INTC_H__
-#define __V850_V850E_INTC_H__
-
-
-/* There are 4 16-bit `Interrupt Mask Registers' located contiguously
- starting from this base. Each interrupt uses a single bit to
- indicated enabled/disabled status. */
-#define V850E_INTC_IMR_BASE_ADDR 0xFFFFF100
-#define V850E_INTC_IMR_ADDR(irq) (V850E_INTC_IMR_BASE_ADDR + ((irq) >> 3))
-#define V850E_INTC_IMR_BIT(irq) ((irq) & 0x7)
-
-/* Each maskable interrupt has a single-byte control register at this
- address. */
-#define V850E_INTC_IC_BASE_ADDR 0xFFFFF110
-#define V850E_INTC_IC_ADDR(irq) (V850E_INTC_IC_BASE_ADDR + ((irq) << 1))
-#define V850E_INTC_IC(irq) (*(volatile u8 *)V850E_INTC_IC_ADDR(irq))
-/* Encode priority PR for storing in an interrupt control register. */
-#define V850E_INTC_IC_PR(pr) (pr)
-/* Interrupt disable bit in an interrupt control register. */
-#define V850E_INTC_IC_MK_BIT 6
-#define V850E_INTC_IC_MK (1 << V850E_INTC_IC_MK_BIT)
-/* Interrupt pending flag in an interrupt control register. */
-#define V850E_INTC_IC_IF_BIT 7
-#define V850E_INTC_IC_IF (1 << V850E_INTC_IC_IF_BIT)
-
-/* The ISPR (In-service priority register) contains one bit for each interrupt
- priority level, which is set to one when that level is currently being
- serviced (and thus blocking any interrupts of equal or lesser level). */
-#define V850E_INTC_ISPR_ADDR 0xFFFFF1FA
-#define V850E_INTC_ISPR (*(volatile u8 *)V850E_INTC_ISPR_ADDR)
-
-
-#ifndef __ASSEMBLY__
-
-/* Enable interrupt handling for interrupt IRQ. */
-static inline void v850e_intc_enable_irq (unsigned irq)
-{
- __asm__ __volatile__ ("clr1 %0, [%1]"
- :: "r" (V850E_INTC_IMR_BIT (irq)),
- "r" (V850E_INTC_IMR_ADDR (irq))
- : "memory");
-}
-
-/* Disable interrupt handling for interrupt IRQ. Note that any
- interrupts received while disabled will be delivered once the
- interrupt is enabled again, unless they are explicitly cleared using
- `v850e_intc_clear_pending_irq'. */
-static inline void v850e_intc_disable_irq (unsigned irq)
-{
- __asm__ __volatile__ ("set1 %0, [%1]"
- :: "r" (V850E_INTC_IMR_BIT (irq)),
- "r" (V850E_INTC_IMR_ADDR (irq))
- : "memory");
-}
-
-/* Return true if interrupt handling for interrupt IRQ is enabled. */
-static inline int v850e_intc_irq_enabled (unsigned irq)
-{
- int rval;
- __asm__ __volatile__ ("tst1 %1, [%2]; setf z, %0"
- : "=r" (rval)
- : "r" (V850E_INTC_IMR_BIT (irq)),
- "r" (V850E_INTC_IMR_ADDR (irq)));
- return rval;
-}
-
-/* Disable irqs from 0 until LIMIT. LIMIT must be a multiple of 8. */
-static inline void _v850e_intc_disable_irqs (unsigned limit)
-{
- unsigned long addr;
- for (addr = V850E_INTC_IMR_BASE_ADDR; limit >= 8; addr++, limit -= 8)
- *(char *)addr = 0xFF;
-}
-
-/* Disable all irqs. This is purposely a macro, because NUM_MACH_IRQS
- will be only be defined later. */
-#define v850e_intc_disable_irqs() _v850e_intc_disable_irqs (NUM_MACH_IRQS)
-
-/* Clear any pending interrupts for IRQ. */
-static inline void v850e_intc_clear_pending_irq (unsigned irq)
-{
- __asm__ __volatile__ ("clr1 %0, 0[%1]"
- :: "i" (V850E_INTC_IC_IF_BIT),
- "r" (V850E_INTC_IC_ADDR (irq))
- : "memory");
-}
-
-/* Return true if interrupt IRQ is pending (but disabled). */
-static inline int v850e_intc_irq_pending (unsigned irq)
-{
- int rval;
- __asm__ __volatile__ ("tst1 %1, 0[%2]; setf nz, %0"
- : "=r" (rval)
- : "i" (V850E_INTC_IC_IF_BIT),
- "r" (V850E_INTC_IC_ADDR (irq)));
- return rval;
-}
-
-
-struct v850e_intc_irq_init {
- const char *name; /* name of interrupt type */
-
- /* Range of kernel irq numbers for this type:
- BASE, BASE+INTERVAL, ..., BASE+INTERVAL*NUM */
- unsigned base, num, interval;
-
- unsigned priority; /* interrupt priority to assign */
-};
-struct hw_interrupt_type; /* fwd decl */
-
-/* Initialize HW_IRQ_TYPES for INTC-controlled irqs described in array
- INITS (which is terminated by an entry with the name field == 0). */
-extern void v850e_intc_init_irq_types (struct v850e_intc_irq_init *inits,
- struct hw_interrupt_type *hw_irq_types);
-
-
-#endif /* !__ASSEMBLY__ */
-
-
-#endif /* __V850_V850E_INTC_H__ */
diff --git a/include/asm-v850/v850e_timer_c.h b/include/asm-v850/v850e_timer_c.h
deleted file mode 100644
index f70575df6ea9..000000000000
--- a/include/asm-v850/v850e_timer_c.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * include/asm-v850/v850e_timer_c.h -- `Timer C' component often used
- * with the V850E cpu core
- *
- * Copyright (C) 2001,03 NEC Electronics Corporation
- * Copyright (C) 2001,03 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-/* NOTE: this include file currently contains only enough to allow us to
- use timer C as an interrupt pass-through. */
-
-#ifndef __V850_V850E_TIMER_C_H__
-#define __V850_V850E_TIMER_C_H__
-
-#include <asm/types.h>
-#include <asm/machdep.h> /* Pick up chip-specific defs. */
-
-
-/* Timer C (16-bit interval timers). */
-
-/* Control register 0 for timer C. */
-#define V850E_TIMER_C_TMCC0_ADDR(n) (V850E_TIMER_C_BASE_ADDR + 0x6 + 0x10 *(n))
-#define V850E_TIMER_C_TMCC0(n) (*(volatile u8 *)V850E_TIMER_C_TMCC0_ADDR(n))
-#define V850E_TIMER_C_TMCC0_CAE 0x01 /* clock action enable */
-#define V850E_TIMER_C_TMCC0_CE 0x02 /* count enable */
-/* ... */
-
-/* Control register 1 for timer C. */
-#define V850E_TIMER_C_TMCC1_ADDR(n) (V850E_TIMER_C_BASE_ADDR + 0x8 + 0x10 *(n))
-#define V850E_TIMER_C_TMCC1(n) (*(volatile u8 *)V850E_TIMER_C_TMCC1_ADDR(n))
-#define V850E_TIMER_C_TMCC1_CMS0 0x01 /* capture/compare mode select (ccc0) */
-#define V850E_TIMER_C_TMCC1_CMS1 0x02 /* capture/compare mode select (ccc1) */
-/* ... */
-
-/* Interrupt edge-sensitivity control for timer C. */
-#define V850E_TIMER_C_SESC_ADDR(n) (V850E_TIMER_C_BASE_ADDR + 0x9 + 0x10 *(n))
-#define V850E_TIMER_C_SESC(n) (*(volatile u8 *)V850E_TIMER_C_SESC_ADDR(n))
-
-/* ...etc... */
-
-
-#endif /* __V850_V850E_TIMER_C_H__ */
diff --git a/include/asm-v850/v850e_timer_d.h b/include/asm-v850/v850e_timer_d.h
deleted file mode 100644
index 417612c5b22f..000000000000
--- a/include/asm-v850/v850e_timer_d.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * include/asm-v850/v850e_timer_d.h -- `Timer D' component often used
- * with the V850E cpu core
- *
- * Copyright (C) 2001,02,03 NEC Electronics Corporation
- * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_V850E_TIMER_D_H__
-#define __V850_V850E_TIMER_D_H__
-
-#include <asm/types.h>
-#include <asm/machdep.h> /* Pick up chip-specific defs. */
-
-
-/* Timer D (16-bit interval timers). */
-
-/* Count registers for timer D. */
-#define V850E_TIMER_D_TMD_ADDR(n) (V850E_TIMER_D_TMD_BASE_ADDR + 0x10 * (n))
-#define V850E_TIMER_D_TMD(n) (*(volatile u16 *)V850E_TIMER_D_TMD_ADDR(n))
-
-/* Count compare registers for timer D. */
-#define V850E_TIMER_D_CMD_ADDR(n) (V850E_TIMER_D_CMD_BASE_ADDR + 0x10 * (n))
-#define V850E_TIMER_D_CMD(n) (*(volatile u16 *)V850E_TIMER_D_CMD_ADDR(n))
-
-/* Control registers for timer D. */
-#define V850E_TIMER_D_TMCD_ADDR(n) (V850E_TIMER_D_TMCD_BASE_ADDR + 0x10 * (n))
-#define V850E_TIMER_D_TMCD(n) (*(volatile u8 *)V850E_TIMER_D_TMCD_ADDR(n))
-/* Control bits for timer D. */
-#define V850E_TIMER_D_TMCD_CE 0x2 /* count enable */
-#define V850E_TIMER_D_TMCD_CAE 0x1 /* clock action enable */
-/* Clock divider setting (log2). */
-#define V850E_TIMER_D_TMCD_CS(divlog2) (((divlog2) - V850E_TIMER_D_TMCD_CS_MIN) << 4)
-/* Minimum clock divider setting (log2). */
-#ifndef V850E_TIMER_D_TMCD_CS_MIN /* Can be overridden by mach-specific hdrs */
-#define V850E_TIMER_D_TMCD_CS_MIN 2 /* Default is correct for the v850e/ma1 */
-#endif
-/* Maximum clock divider setting (log2). */
-#define V850E_TIMER_D_TMCD_CS_MAX (V850E_TIMER_D_TMCD_CS_MIN + 7)
-
-/* Return the clock-divider (log2) of timer D unit N. */
-#define V850E_TIMER_D_DIVLOG2(n) \
- (((V850E_TIMER_D_TMCD(n) >> 4) & 0x7) + V850E_TIMER_D_TMCD_CS_MIN)
-
-
-#ifndef __ASSEMBLY__
-
-/* Start interval timer TIMER (0-3). The timer will issue the
- corresponding INTCMD interrupt RATE times per second. This function
- does not enable the interrupt. */
-extern void v850e_timer_d_configure (unsigned timer, unsigned rate);
-
-#endif /* !__ASSEMBLY__ */
-
-
-#endif /* __V850_V850E_TIMER_D_H__ */
diff --git a/include/asm-v850/v850e_uart.h b/include/asm-v850/v850e_uart.h
deleted file mode 100644
index 5182fb4cc989..000000000000
--- a/include/asm-v850/v850e_uart.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * include/asm-v850/v850e_uart.h -- common V850E on-chip UART driver
- *
- * Copyright (C) 2001,02,03 NEC Electronics Corporation
- * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-/* There's not actually a single UART implementation used by V850E CPUs,
- but rather a series of implementations that are all `close' to one
- another. This file corresponds to the single driver which handles all
- of them. */
-
-#ifndef __V850_V850E_UART_H__
-#define __V850_V850E_UART_H__
-
-#include <linux/termios.h>
-
-#include <asm/v850e_utils.h>
-#include <asm/types.h>
-#include <asm/machdep.h> /* Pick up chip-specific defs. */
-
-
-/* Include model-specific definitions. */
-#ifdef CONFIG_V850E_UART
-# ifdef CONFIG_V850E_UARTB
-# include <asm-v850/v850e_uartb.h>
-# else
-# include <asm-v850/v850e_uarta.h> /* original V850E UART */
-# endif
-#endif
-
-
-/* Optional capabilities some hardware provides. */
-
-/* This UART doesn't implement RTS/CTS by default, but some platforms
- implement them externally, so check to see if <asm/machdep.h> defined
- anything. */
-#ifdef V850E_UART_CTS
-#define v850e_uart_cts(n) V850E_UART_CTS(n)
-#else
-#define v850e_uart_cts(n) (1)
-#endif
-
-/* Do the same for RTS. */
-#ifdef V850E_UART_SET_RTS
-#define v850e_uart_set_rts(n,v) V850E_UART_SET_RTS(n,v)
-#else
-#define v850e_uart_set_rts(n,v) ((void)0)
-#endif
-
-
-/* This is the serial channel to use for the boot console (if desired). */
-#ifndef V850E_UART_CONSOLE_CHANNEL
-# define V850E_UART_CONSOLE_CHANNEL 0
-#endif
-
-
-#ifndef __ASSEMBLY__
-
-/* Setup a console using channel 0 of the builtin uart. */
-extern void v850e_uart_cons_init (unsigned chan);
-
-/* Configure and turn on uart channel CHAN, using the termios `control
- modes' bits in CFLAGS, and a baud-rate of BAUD. */
-void v850e_uart_configure (unsigned chan, unsigned cflags, unsigned baud);
-
-#endif /* !__ASSEMBLY__ */
-
-
-#endif /* __V850_V850E_UART_H__ */
diff --git a/include/asm-v850/v850e_uarta.h b/include/asm-v850/v850e_uarta.h
deleted file mode 100644
index e483e0950725..000000000000
--- a/include/asm-v850/v850e_uarta.h
+++ /dev/null
@@ -1,278 +0,0 @@
-/*
- * include/asm-v850/v850e_uarta.h -- original V850E on-chip UART
- *
- * Copyright (C) 2001,02,03 NEC Electronics Corporation
- * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-/* This is the original V850E UART implementation is called just `UART' in
- the docs, but we name this header file <asm/v850e_uarta.h> because the
- name <asm/v850e_uart.h> is used for the common driver that handles both
- `UART' and `UARTB' implementations. */
-
-#ifndef __V850_V850E_UARTA_H__
-#define __V850_V850E_UARTA_H__
-
-
-/* Raw hardware interface. */
-
-/* The base address of the UART control registers for channel N.
- The default is the address used on the V850E/MA1. */
-#ifndef V850E_UART_BASE_ADDR
-#define V850E_UART_BASE_ADDR(n) (0xFFFFFA00 + 0x10 * (n))
-#endif
-
-/* Addresses of specific UART control registers for channel N.
- The defaults are the addresses used on the V850E/MA1; if a platform
- wants to redefine any of these, it must redefine them all. */
-#ifndef V850E_UART_ASIM_ADDR
-#define V850E_UART_ASIM_ADDR(n) (V850E_UART_BASE_ADDR(n) + 0x0)
-#define V850E_UART_RXB_ADDR(n) (V850E_UART_BASE_ADDR(n) + 0x2)
-#define V850E_UART_ASIS_ADDR(n) (V850E_UART_BASE_ADDR(n) + 0x3)
-#define V850E_UART_TXB_ADDR(n) (V850E_UART_BASE_ADDR(n) + 0x4)
-#define V850E_UART_ASIF_ADDR(n) (V850E_UART_BASE_ADDR(n) + 0x5)
-#define V850E_UART_CKSR_ADDR(n) (V850E_UART_BASE_ADDR(n) + 0x6)
-#define V850E_UART_BRGC_ADDR(n) (V850E_UART_BASE_ADDR(n) + 0x7)
-#endif
-
-/* UART config registers. */
-#define V850E_UART_ASIM(n) (*(volatile u8 *)V850E_UART_ASIM_ADDR(n))
-/* Control bits for config registers. */
-#define V850E_UART_ASIM_CAE 0x80 /* clock enable */
-#define V850E_UART_ASIM_TXE 0x40 /* transmit enable */
-#define V850E_UART_ASIM_RXE 0x20 /* receive enable */
-#define V850E_UART_ASIM_PS_MASK 0x18 /* mask covering parity-select bits */
-#define V850E_UART_ASIM_PS_NONE 0x00 /* no parity */
-#define V850E_UART_ASIM_PS_ZERO 0x08 /* zero parity */
-#define V850E_UART_ASIM_PS_ODD 0x10 /* odd parity */
-#define V850E_UART_ASIM_PS_EVEN 0x18 /* even parity */
-#define V850E_UART_ASIM_CL_8 0x04 /* char len is 8 bits (otherwise, 7) */
-#define V850E_UART_ASIM_SL_2 0x02 /* 2 stop bits (otherwise, 1) */
-#define V850E_UART_ASIM_ISRM 0x01 /* generate INTSR interrupt on errors
- (otherwise, generate INTSER) */
-
-/* UART serial interface status registers. */
-#define V850E_UART_ASIS(n) (*(volatile u8 *)V850E_UART_ASIS_ADDR(n))
-/* Control bits for status registers. */
-#define V850E_UART_ASIS_PE 0x04 /* parity error */
-#define V850E_UART_ASIS_FE 0x02 /* framing error */
-#define V850E_UART_ASIS_OVE 0x01 /* overrun error */
-
-/* UART serial interface transmission status registers. */
-#define V850E_UART_ASIF(n) (*(volatile u8 *)V850E_UART_ASIF_ADDR(n))
-#define V850E_UART_ASIF_TXBF 0x02 /* transmit buffer flag (data in TXB) */
-#define V850E_UART_ASIF_TXSF 0x01 /* transmit shift flag (sending data) */
-
-/* UART receive buffer register. */
-#define V850E_UART_RXB(n) (*(volatile u8 *)V850E_UART_RXB_ADDR(n))
-
-/* UART transmit buffer register. */
-#define V850E_UART_TXB(n) (*(volatile u8 *)V850E_UART_TXB_ADDR(n))
-
-/* UART baud-rate generator control registers. */
-#define V850E_UART_CKSR(n) (*(volatile u8 *)V850E_UART_CKSR_ADDR(n))
-#define V850E_UART_CKSR_MAX 11
-#define V850E_UART_BRGC(n) (*(volatile u8 *)V850E_UART_BRGC_ADDR(n))
-#define V850E_UART_BRGC_MIN 8
-
-
-#ifndef V850E_UART_CKSR_MAX_FREQ
-#define V850E_UART_CKSR_MAX_FREQ (25*1000*1000)
-#endif
-
-/* Calculate the minimum value for CKSR on this processor. */
-static inline unsigned v850e_uart_cksr_min (void)
-{
- int min = 0;
- unsigned freq = V850E_UART_BASE_FREQ;
- while (freq > V850E_UART_CKSR_MAX_FREQ) {
- freq >>= 1;
- min++;
- }
- return min;
-}
-
-
-/* Slightly abstract interface used by driver. */
-
-
-/* Interrupts used by the UART. */
-
-/* Received when the most recently transmitted character has been sent. */
-#define V850E_UART_TX_IRQ(chan) IRQ_INTST (chan)
-/* Received when a new character has been received. */
-#define V850E_UART_RX_IRQ(chan) IRQ_INTSR (chan)
-
-
-/* UART clock generator interface. */
-
-/* This type encapsulates a particular uart frequency. */
-typedef struct {
- unsigned clk_divlog2;
- unsigned brgen_count;
-} v850e_uart_speed_t;
-
-/* Calculate a uart speed from BAUD for this uart. */
-static inline v850e_uart_speed_t v850e_uart_calc_speed (unsigned baud)
-{
- v850e_uart_speed_t speed;
-
- /* Calculate the log2 clock divider and baud-rate counter values
- (note that the UART divides the resulting clock by 2, so
- multiply BAUD by 2 here to compensate). */
- calc_counter_params (V850E_UART_BASE_FREQ, baud * 2,
- v850e_uart_cksr_min(),
- V850E_UART_CKSR_MAX, 8/*bits*/,
- &speed.clk_divlog2, &speed.brgen_count);
-
- return speed;
-}
-
-/* Return the current speed of uart channel CHAN. */
-static inline v850e_uart_speed_t v850e_uart_speed (unsigned chan)
-{
- v850e_uart_speed_t speed;
- speed.clk_divlog2 = V850E_UART_CKSR (chan);
- speed.brgen_count = V850E_UART_BRGC (chan);
- return speed;
-}
-
-/* Set the current speed of uart channel CHAN. */
-static inline void v850e_uart_set_speed(unsigned chan,v850e_uart_speed_t speed)
-{
- V850E_UART_CKSR (chan) = speed.clk_divlog2;
- V850E_UART_BRGC (chan) = speed.brgen_count;
-}
-
-static inline int
-v850e_uart_speed_eq (v850e_uart_speed_t speed1, v850e_uart_speed_t speed2)
-{
- return speed1.clk_divlog2 == speed2.clk_divlog2
- && speed1.brgen_count == speed2.brgen_count;
-}
-
-/* Minimum baud rate possible. */
-#define v850e_uart_min_baud() \
- ((V850E_UART_BASE_FREQ >> V850E_UART_CKSR_MAX) / (2 * 255) + 1)
-
-/* Maximum baud rate possible. The error is quite high at max, though. */
-#define v850e_uart_max_baud() \
- ((V850E_UART_BASE_FREQ >> v850e_uart_cksr_min()) / (2 *V850E_UART_BRGC_MIN))
-
-/* The `maximum' clock rate the uart can used, which is wanted (though not
- really used in any useful way) by the serial framework. */
-#define v850e_uart_max_clock() \
- ((V850E_UART_BASE_FREQ >> v850e_uart_cksr_min()) / 2)
-
-
-/* UART configuration interface. */
-
-/* Type of the uart config register; must be a scalar. */
-typedef u16 v850e_uart_config_t;
-
-/* The uart hardware config register for channel CHAN. */
-#define V850E_UART_CONFIG(chan) V850E_UART_ASIM (chan)
-
-/* This config bit set if the uart is enabled. */
-#define V850E_UART_CONFIG_ENABLED V850E_UART_ASIM_CAE
-/* If the uart _isn't_ enabled, store this value to it to do so. */
-#define V850E_UART_CONFIG_INIT V850E_UART_ASIM_CAE
-/* Store this config value to disable the uart channel completely. */
-#define V850E_UART_CONFIG_FINI 0
-
-/* Setting/clearing these bits enable/disable TX/RX, respectively (but
- otherwise generally leave things running). */
-#define V850E_UART_CONFIG_RX_ENABLE V850E_UART_ASIM_RXE
-#define V850E_UART_CONFIG_TX_ENABLE V850E_UART_ASIM_TXE
-
-/* These masks define which config bits affect TX/RX modes, respectively. */
-#define V850E_UART_CONFIG_RX_BITS \
- (V850E_UART_ASIM_PS_MASK | V850E_UART_ASIM_CL_8 | V850E_UART_ASIM_ISRM)
-#define V850E_UART_CONFIG_TX_BITS \
- (V850E_UART_ASIM_PS_MASK | V850E_UART_ASIM_CL_8 | V850E_UART_ASIM_SL_2)
-
-static inline v850e_uart_config_t v850e_uart_calc_config (unsigned cflags)
-{
- v850e_uart_config_t config = 0;
-
- /* Figure out new configuration of control register. */
- if (cflags & CSTOPB)
- /* Number of stop bits, 1 or 2. */
- config |= V850E_UART_ASIM_SL_2;
- if ((cflags & CSIZE) == CS8)
- /* Number of data bits, 7 or 8. */
- config |= V850E_UART_ASIM_CL_8;
- if (! (cflags & PARENB))
- /* No parity check/generation. */
- config |= V850E_UART_ASIM_PS_NONE;
- else if (cflags & PARODD)
- /* Odd parity check/generation. */
- config |= V850E_UART_ASIM_PS_ODD;
- else
- /* Even parity check/generation. */
- config |= V850E_UART_ASIM_PS_EVEN;
- if (cflags & CREAD)
- /* Reading enabled. */
- config |= V850E_UART_ASIM_RXE;
-
- config |= V850E_UART_ASIM_CAE;
- config |= V850E_UART_ASIM_TXE; /* Writing is always enabled. */
- config |= V850E_UART_ASIM_ISRM; /* Errors generate a read-irq. */
-
- return config;
-}
-
-/* This should delay as long as necessary for a recently written config
- setting to settle, before we turn the uart back on. */
-static inline void
-v850e_uart_config_delay (v850e_uart_config_t config, v850e_uart_speed_t speed)
-{
- /* The UART may not be reset properly unless we wait at least 2
- `basic-clocks' until turning on the TXE/RXE bits again.
- A `basic clock' is the clock used by the baud-rate generator,
- i.e., the cpu clock divided by the 2^new_clk_divlog2.
- The loop takes 2 insns, so loop CYCLES / 2 times. */
- register unsigned count = 1 << speed.clk_divlog2;
- while (--count != 0)
- /* nothing */;
-}
-
-
-/* RX/TX interface. */
-
-/* Return true if all characters awaiting transmission on uart channel N
- have been transmitted. */
-#define v850e_uart_xmit_done(n) \
- (! (V850E_UART_ASIF(n) & V850E_UART_ASIF_TXBF))
-/* Wait for this to be true. */
-#define v850e_uart_wait_for_xmit_done(n) \
- do { } while (! v850e_uart_xmit_done (n))
-
-/* Return true if uart channel N is ready to transmit a character. */
-#define v850e_uart_xmit_ok(n) \
- (v850e_uart_xmit_done(n) && v850e_uart_cts(n))
-/* Wait for this to be true. */
-#define v850e_uart_wait_for_xmit_ok(n) \
- do { } while (! v850e_uart_xmit_ok (n))
-
-/* Write character CH to uart channel CHAN. */
-#define v850e_uart_putc(chan, ch) (V850E_UART_TXB(chan) = (ch))
-
-/* Return latest character read on channel CHAN. */
-#define v850e_uart_getc(chan) V850E_UART_RXB (chan)
-
-/* Return bit-mask of uart error status. */
-#define v850e_uart_err(chan) V850E_UART_ASIS (chan)
-/* Various error bits set in the error result. */
-#define V850E_UART_ERR_OVERRUN V850E_UART_ASIS_OVE
-#define V850E_UART_ERR_FRAME V850E_UART_ASIS_FE
-#define V850E_UART_ERR_PARITY V850E_UART_ASIS_PE
-
-
-#endif /* __V850_V850E_UARTA_H__ */
diff --git a/include/asm-v850/v850e_uartb.h b/include/asm-v850/v850e_uartb.h
deleted file mode 100644
index 6d4767d5a835..000000000000
--- a/include/asm-v850/v850e_uartb.h
+++ /dev/null
@@ -1,262 +0,0 @@
-/*
- * include/asm-v850/v850e_uartb.h -- V850E on-chip `UARTB' UART
- *
- * Copyright (C) 2001,02,03 NEC Electronics Corporation
- * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-/* The V850E UARTB is basically a superset of the original V850E UART, but
- even where it's the same, the names and details have changed a bit.
- It's similar enough to use the same driver (v850e_uart.c), but the
- details have been abstracted slightly to do so. */
-
-#ifndef __V850_V850E_UARTB_H__
-#define __V850_V850E_UARTB_H__
-
-
-/* Raw hardware interface. */
-
-#define V850E_UARTB_BASE_ADDR(n) (0xFFFFFA00 + 0x10 * (n))
-
-/* Addresses of specific UART control registers for channel N. */
-#define V850E_UARTB_CTL0_ADDR(n) (V850E_UARTB_BASE_ADDR(n) + 0x0)
-#define V850E_UARTB_CTL2_ADDR(n) (V850E_UARTB_BASE_ADDR(n) + 0x2)
-#define V850E_UARTB_STR_ADDR(n) (V850E_UARTB_BASE_ADDR(n) + 0x4)
-#define V850E_UARTB_RX_ADDR(n) (V850E_UARTB_BASE_ADDR(n) + 0x6)
-#define V850E_UARTB_RXAP_ADDR(n) (V850E_UARTB_BASE_ADDR(n) + 0x6)
-#define V850E_UARTB_TX_ADDR(n) (V850E_UARTB_BASE_ADDR(n) + 0x8)
-#define V850E_UARTB_FIC0_ADDR(n) (V850E_UARTB_BASE_ADDR(n) + 0xA)
-#define V850E_UARTB_FIC1_ADDR(n) (V850E_UARTB_BASE_ADDR(n) + 0xB)
-#define V850E_UARTB_FIC2_ADDR(n) (V850E_UARTB_BASE_ADDR(n) + 0xC)
-#define V850E_UARTB_FIS0_ADDR(n) (V850E_UARTB_BASE_ADDR(n) + 0xE)
-#define V850E_UARTB_FIS1_ADDR(n) (V850E_UARTB_BASE_ADDR(n) + 0xF)
-
-/* UARTB control register 0 (general config). */
-#define V850E_UARTB_CTL0(n) (*(volatile u8 *)V850E_UARTB_CTL0_ADDR(n))
-/* Control bits for config registers. */
-#define V850E_UARTB_CTL0_PWR 0x80 /* clock enable */
-#define V850E_UARTB_CTL0_TXE 0x40 /* transmit enable */
-#define V850E_UARTB_CTL0_RXE 0x20 /* receive enable */
-#define V850E_UARTB_CTL0_DIR 0x10 /* */
-#define V850E_UARTB_CTL0_PS1 0x08 /* parity */
-#define V850E_UARTB_CTL0_PS0 0x04 /* parity */
-#define V850E_UARTB_CTL0_CL 0x02 /* char len 1:8bit, 0:7bit */
-#define V850E_UARTB_CTL0_SL 0x01 /* stop bit 1:2bit, 0:1bit */
-#define V850E_UARTB_CTL0_PS_MASK 0x0C /* mask covering parity bits */
-#define V850E_UARTB_CTL0_PS_NONE 0x00 /* no parity */
-#define V850E_UARTB_CTL0_PS_ZERO 0x04 /* zero parity */
-#define V850E_UARTB_CTL0_PS_ODD 0x08 /* odd parity */
-#define V850E_UARTB_CTL0_PS_EVEN 0x0C /* even parity */
-#define V850E_UARTB_CTL0_CL_8 0x02 /* char len 1:8bit, 0:7bit */
-#define V850E_UARTB_CTL0_SL_2 0x01 /* stop bit 1:2bit, 0:1bit */
-
-/* UARTB control register 2 (clock divider). */
-#define V850E_UARTB_CTL2(n) (*(volatile u16 *)V850E_UARTB_CTL2_ADDR(n))
-#define V850E_UARTB_CTL2_MIN 4
-#define V850E_UARTB_CTL2_MAX 0xFFFF
-
-/* UARTB serial interface status register. */
-#define V850E_UARTB_STR(n) (*(volatile u8 *)V850E_UARTB_STR_ADDR(n))
-/* Control bits for status registers. */
-#define V850E_UARTB_STR_TSF 0x80 /* UBTX or FIFO exist data */
-#define V850E_UARTB_STR_OVF 0x08 /* overflow error */
-#define V850E_UARTB_STR_PE 0x04 /* parity error */
-#define V850E_UARTB_STR_FE 0x02 /* framing error */
-#define V850E_UARTB_STR_OVE 0x01 /* overrun error */
-
-/* UARTB receive data register. */
-#define V850E_UARTB_RX(n) (*(volatile u8 *)V850E_UARTB_RX_ADDR(n))
-#define V850E_UARTB_RXAP(n) (*(volatile u16 *)V850E_UARTB_RXAP_ADDR(n))
-/* Control bits for status registers. */
-#define V850E_UARTB_RXAP_PEF 0x0200 /* parity error */
-#define V850E_UARTB_RXAP_FEF 0x0100 /* framing error */
-
-/* UARTB transmit data register. */
-#define V850E_UARTB_TX(n) (*(volatile u8 *)V850E_UARTB_TX_ADDR(n))
-
-/* UARTB FIFO control register 0. */
-#define V850E_UARTB_FIC0(n) (*(volatile u8 *)V850E_UARTB_FIC0_ADDR(n))
-
-/* UARTB FIFO control register 1. */
-#define V850E_UARTB_FIC1(n) (*(volatile u8 *)V850E_UARTB_FIC1_ADDR(n))
-
-/* UARTB FIFO control register 2. */
-#define V850E_UARTB_FIC2(n) (*(volatile u16 *)V850E_UARTB_FIC2_ADDR(n))
-
-/* UARTB FIFO status register 0. */
-#define V850E_UARTB_FIS0(n) (*(volatile u8 *)V850E_UARTB_FIS0_ADDR(n))
-
-/* UARTB FIFO status register 1. */
-#define V850E_UARTB_FIS1(n) (*(volatile u8 *)V850E_UARTB_FIS1_ADDR(n))
-
-
-/* Slightly abstract interface used by driver. */
-
-
-/* Interrupts used by the UART. */
-
-/* Received when the most recently transmitted character has been sent. */
-#define V850E_UART_TX_IRQ(chan) IRQ_INTUBTIT (chan)
-/* Received when a new character has been received. */
-#define V850E_UART_RX_IRQ(chan) IRQ_INTUBTIR (chan)
-
-/* Use by serial driver for information purposes. */
-#define V850E_UART_BASE_ADDR(chan) V850E_UARTB_BASE_ADDR(chan)
-
-
-/* UART clock generator interface. */
-
-/* This type encapsulates a particular uart frequency. */
-typedef u16 v850e_uart_speed_t;
-
-/* Calculate a uart speed from BAUD for this uart. */
-static inline v850e_uart_speed_t v850e_uart_calc_speed (unsigned baud)
-{
- v850e_uart_speed_t speed;
-
- /*
- * V850E/ME2 UARTB baud rate is determined by the value of UBCTL2
- * fx = V850E_UARTB_BASE_FREQ = CPU_CLOCK_FREQ/4
- * baud = fx / 2*speed [ speed >= 4 ]
- */
- speed = V850E_UARTB_CTL2_MIN;
- while (((V850E_UARTB_BASE_FREQ / 2) / speed ) > baud)
- speed++;
-
- return speed;
-}
-
-/* Return the current speed of uart channel CHAN. */
-#define v850e_uart_speed(chan) V850E_UARTB_CTL2 (chan)
-
-/* Set the current speed of uart channel CHAN. */
-#define v850e_uart_set_speed(chan, speed) (V850E_UARTB_CTL2 (chan) = (speed))
-
-/* Return true if SPEED1 and SPEED2 are the same. */
-#define v850e_uart_speed_eq(speed1, speed2) ((speed1) == (speed2))
-
-/* Minimum baud rate possible. */
-#define v850e_uart_min_baud() \
- ((V850E_UARTB_BASE_FREQ / 2) / V850E_UARTB_CTL2_MAX)
-
-/* Maximum baud rate possible. The error is quite high at max, though. */
-#define v850e_uart_max_baud() \
- ((V850E_UARTB_BASE_FREQ / 2) / V850E_UARTB_CTL2_MIN)
-
-/* The `maximum' clock rate the uart can used, which is wanted (though not
- really used in any useful way) by the serial framework. */
-#define v850e_uart_max_clock() \
- (V850E_UARTB_BASE_FREQ / 2)
-
-
-/* UART configuration interface. */
-
-/* Type of the uart config register; must be a scalar. */
-typedef u16 v850e_uart_config_t;
-
-/* The uart hardware config register for channel CHAN. */
-#define V850E_UART_CONFIG(chan) V850E_UARTB_CTL0 (chan)
-
-/* This config bit set if the uart is enabled. */
-#define V850E_UART_CONFIG_ENABLED V850E_UARTB_CTL0_PWR
-/* If the uart _isn't_ enabled, store this value to it to do so. */
-#define V850E_UART_CONFIG_INIT V850E_UARTB_CTL0_PWR
-/* Store this config value to disable the uart channel completely. */
-#define V850E_UART_CONFIG_FINI 0
-
-/* Setting/clearing these bits enable/disable TX/RX, respectively (but
- otherwise generally leave things running). */
-#define V850E_UART_CONFIG_RX_ENABLE V850E_UARTB_CTL0_RXE
-#define V850E_UART_CONFIG_TX_ENABLE V850E_UARTB_CTL0_TXE
-
-/* These masks define which config bits affect TX/RX modes, respectively. */
-#define V850E_UART_CONFIG_RX_BITS \
- (V850E_UARTB_CTL0_PS_MASK | V850E_UARTB_CTL0_CL_8)
-#define V850E_UART_CONFIG_TX_BITS \
- (V850E_UARTB_CTL0_PS_MASK | V850E_UARTB_CTL0_CL_8 | V850E_UARTB_CTL0_SL_2)
-
-static inline v850e_uart_config_t v850e_uart_calc_config (unsigned cflags)
-{
- v850e_uart_config_t config = 0;
-
- /* Figure out new configuration of control register. */
- if (cflags & CSTOPB)
- /* Number of stop bits, 1 or 2. */
- config |= V850E_UARTB_CTL0_SL_2;
- if ((cflags & CSIZE) == CS8)
- /* Number of data bits, 7 or 8. */
- config |= V850E_UARTB_CTL0_CL_8;
- if (! (cflags & PARENB))
- /* No parity check/generation. */
- config |= V850E_UARTB_CTL0_PS_NONE;
- else if (cflags & PARODD)
- /* Odd parity check/generation. */
- config |= V850E_UARTB_CTL0_PS_ODD;
- else
- /* Even parity check/generation. */
- config |= V850E_UARTB_CTL0_PS_EVEN;
- if (cflags & CREAD)
- /* Reading enabled. */
- config |= V850E_UARTB_CTL0_RXE;
-
- config |= V850E_UARTB_CTL0_PWR;
- config |= V850E_UARTB_CTL0_TXE; /* Writing is always enabled. */
- config |= V850E_UARTB_CTL0_DIR; /* LSB first. */
-
- return config;
-}
-
-/* This should delay as long as necessary for a recently written config
- setting to settle, before we turn the uart back on. */
-static inline void
-v850e_uart_config_delay (v850e_uart_config_t config, v850e_uart_speed_t speed)
-{
- /* The UART may not be reset properly unless we wait at least 2
- `basic-clocks' until turning on the TXE/RXE bits again.
- A `basic clock' is the clock used by the baud-rate generator,
- i.e., the cpu clock divided by the 2^new_clk_divlog2.
- The loop takes 2 insns, so loop CYCLES / 2 times. */
- register unsigned count = 1 << speed;
- while (--count != 0)
- /* nothing */;
-}
-
-
-/* RX/TX interface. */
-
-/* Return true if all characters awaiting transmission on uart channel N
- have been transmitted. */
-#define v850e_uart_xmit_done(n) \
- (! (V850E_UARTB_STR(n) & V850E_UARTB_STR_TSF))
-/* Wait for this to be true. */
-#define v850e_uart_wait_for_xmit_done(n) \
- do { } while (! v850e_uart_xmit_done (n))
-
-/* Return true if uart channel N is ready to transmit a character. */
-#define v850e_uart_xmit_ok(n) \
- (v850e_uart_xmit_done(n) && v850e_uart_cts(n))
-/* Wait for this to be true. */
-#define v850e_uart_wait_for_xmit_ok(n) \
- do { } while (! v850e_uart_xmit_ok (n))
-
-/* Write character CH to uart channel CHAN. */
-#define v850e_uart_putc(chan, ch) (V850E_UARTB_TX(chan) = (ch))
-
-/* Return latest character read on channel CHAN. */
-#define v850e_uart_getc(chan) V850E_UARTB_RX (chan)
-
-/* Return bit-mask of uart error status. */
-#define v850e_uart_err(chan) V850E_UARTB_STR (chan)
-/* Various error bits set in the error result. */
-#define V850E_UART_ERR_OVERRUN V850E_UARTB_STR_OVE
-#define V850E_UART_ERR_FRAME V850E_UARTB_STR_FE
-#define V850E_UART_ERR_PARITY V850E_UARTB_STR_PE
-
-
-#endif /* __V850_V850E_UARTB_H__ */
diff --git a/include/asm-v850/v850e_utils.h b/include/asm-v850/v850e_utils.h
deleted file mode 100644
index 52eb72822d3d..000000000000
--- a/include/asm-v850/v850e_utils.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * include/asm-v850/v850e_utils.h -- Utility functions associated with
- * V850E CPUs
- *
- * Copyright (C) 2001,03 NEC Electronics Corporation
- * Copyright (C) 2001,03 Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License. See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_V850E_UTILS_H__
-#define __V850_V850E_UTILS_H__
-
-/* Calculate counter clock-divider and count values to attain the
- desired frequency RATE from the base frequency BASE_FREQ. The
- counter is expected to have a clock-divider, which can divide the
- system cpu clock by a power of two value from MIN_DIVLOG2 to
- MAX_DIV_LOG2, and a word-size of COUNTER_SIZE bits (the counter
- counts up and resets whenever it's equal to the compare register,
- generating an interrupt or whatever when it does so). The returned
- values are: *DIVLOG2 -- log2 of the desired clock divider and *COUNT
- -- the counter compare value to use. Returns true if it was possible
- to find a reasonable value, otherwise false (and the other return
- values will be set to be as good as possible). */
-extern int calc_counter_params (unsigned long base_freq,
- unsigned long rate,
- unsigned min_divlog2, unsigned max_divlog2,
- unsigned counter_size,
- unsigned *divlog2, unsigned *count);
-
-#endif /* __V850_V850E_UTILS_H__ */
OpenPOWER on IntegriCloud