diff options
Diffstat (limited to 'include/asm-sparc')
156 files changed, 0 insertions, 14442 deletions
diff --git a/include/asm-sparc/Kbuild b/include/asm-sparc/Kbuild deleted file mode 100644 index 671223718f0a..000000000000 --- a/include/asm-sparc/Kbuild +++ /dev/null @@ -1,14 +0,0 @@ -include include/asm-generic/Kbuild.asm - -header-y += apc.h -header-y += asi.h -header-y += bpp.h -header-y += jsflash.h -header-y += openpromio.h -header-y += reg.h -header-y += traps.h -header-y += vfc_ioctls.h - -unifdef-y += fbio.h -unifdef-y += perfctr.h -unifdef-y += psr.h diff --git a/include/asm-sparc/apc.h b/include/asm-sparc/apc.h deleted file mode 100644 index 24e9a7d4d97e..000000000000 --- a/include/asm-sparc/apc.h +++ /dev/null @@ -1,64 +0,0 @@ -/* apc - Driver definitions for power management functions - * of Aurora Personality Chip (APC) on SPARCstation-4/5 and - * derivatives - * - * Copyright (c) 2001 Eric Brower (ebrower@usa.net) - * - */ - -#ifndef _SPARC_APC_H -#define _SPARC_APC_H - -#include <linux/ioctl.h> - -#define APC_IOC 'A' - -#define APCIOCGFANCTL _IOR(APC_IOC, 0x00, int) /* Get fan speed */ -#define APCIOCSFANCTL _IOW(APC_IOC, 0x01, int) /* Set fan speed */ - -#define APCIOCGCPWR _IOR(APC_IOC, 0x02, int) /* Get CPOWER state */ -#define APCIOCSCPWR _IOW(APC_IOC, 0x03, int) /* Set CPOWER state */ - -#define APCIOCGBPORT _IOR(APC_IOC, 0x04, int) /* Get BPORT state */ -#define APCIOCSBPORT _IOW(APC_IOC, 0x05, int) /* Set BPORT state */ - -/* - * Register offsets - */ -#define APC_IDLE_REG 0x00 -#define APC_FANCTL_REG 0x20 -#define APC_CPOWER_REG 0x24 -#define APC_BPORT_REG 0x30 - -#define APC_REGMASK 0x01 -#define APC_BPMASK 0x03 - -/* - * IDLE - CPU standby values (set to initiate standby) - */ -#define APC_IDLE_ON 0x01 - -/* - * FANCTL - Fan speed control state values - */ -#define APC_FANCTL_HI 0x00 /* Fan speed high */ -#define APC_FANCTL_LO 0x01 /* Fan speed low */ - -/* - * CPWR - Convenience power outlet state values - */ -#define APC_CPOWER_ON 0x00 /* Conv power on */ -#define APC_CPOWER_OFF 0x01 /* Conv power off */ - -/* - * BPA/BPB - Read-Write "Bit Ports" state values (reset to 0 at power-on) - * - * WARNING: Internal usage of bit ports is platform dependent-- - * don't modify BPORT settings unless you know what you are doing. - * - * On SS5 BPA seems to toggle onboard ethernet loopback... -E - */ -#define APC_BPORT_A 0x01 /* Bit Port A */ -#define APC_BPORT_B 0x02 /* Bit Port B */ - -#endif /* !(_SPARC_APC_H) */ diff --git a/include/asm-sparc/asi.h b/include/asm-sparc/asi.h deleted file mode 100644 index 158f9b00d43f..000000000000 --- a/include/asm-sparc/asi.h +++ /dev/null @@ -1,111 +0,0 @@ -#ifndef _SPARC_ASI_H -#define _SPARC_ASI_H - -/* asi.h: Address Space Identifier values for the sparc. - * - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - * - * Pioneer work for sun4m: Paul Hatchman (paul@sfe.com.au) - * Joint edition for sun4c+sun4m: Pete A. Zaitcev <zaitcev@ipmce.su> - */ - -/* The first batch are for the sun4c. */ - -#define ASI_NULL1 0x00 -#define ASI_NULL2 0x01 - -/* sun4c and sun4 control registers and mmu/vac ops */ -#define ASI_CONTROL 0x02 -#define ASI_SEGMAP 0x03 -#define ASI_PTE 0x04 -#define ASI_HWFLUSHSEG 0x05 -#define ASI_HWFLUSHPAGE 0x06 -#define ASI_REGMAP 0x06 -#define ASI_HWFLUSHCONTEXT 0x07 - -#define ASI_USERTXT 0x08 -#define ASI_KERNELTXT 0x09 -#define ASI_USERDATA 0x0a -#define ASI_KERNELDATA 0x0b - -/* VAC Cache flushing on sun4c and sun4 */ -#define ASI_FLUSHSEG 0x0c -#define ASI_FLUSHPG 0x0d -#define ASI_FLUSHCTX 0x0e - -/* SPARCstation-5: only 6 bits are decoded. */ -/* wo = Write Only, rw = Read Write; */ -/* ss = Single Size, as = All Sizes; */ -#define ASI_M_RES00 0x00 /* Don't touch... */ -#define ASI_M_UNA01 0x01 /* Same here... */ -#define ASI_M_MXCC 0x02 /* Access to TI VIKING MXCC registers */ -#define ASI_M_FLUSH_PROBE 0x03 /* Reference MMU Flush/Probe; rw, ss */ -#define ASI_M_MMUREGS 0x04 /* MMU Registers; rw, ss */ -#define ASI_M_TLBDIAG 0x05 /* MMU TLB only Diagnostics */ -#define ASI_M_DIAGS 0x06 /* Reference MMU Diagnostics */ -#define ASI_M_IODIAG 0x07 /* MMU I/O TLB only Diagnostics */ -#define ASI_M_USERTXT 0x08 /* Same as ASI_USERTXT; rw, as */ -#define ASI_M_KERNELTXT 0x09 /* Same as ASI_KERNELTXT; rw, as */ -#define ASI_M_USERDATA 0x0A /* Same as ASI_USERDATA; rw, as */ -#define ASI_M_KERNELDATA 0x0B /* Same as ASI_KERNELDATA; rw, as */ -#define ASI_M_TXTC_TAG 0x0C /* Instruction Cache Tag; rw, ss */ -#define ASI_M_TXTC_DATA 0x0D /* Instruction Cache Data; rw, ss */ -#define ASI_M_DATAC_TAG 0x0E /* Data Cache Tag; rw, ss */ -#define ASI_M_DATAC_DATA 0x0F /* Data Cache Data; rw, ss */ - -/* The following cache flushing ASIs work only with the 'sta' - * instruction. Results are unpredictable for 'swap' and 'ldstuba', - * so don't do it. - */ - -/* These ASI flushes affect external caches too. */ -#define ASI_M_FLUSH_PAGE 0x10 /* Flush I&D Cache Line (page); wo, ss */ -#define ASI_M_FLUSH_SEG 0x11 /* Flush I&D Cache Line (seg); wo, ss */ -#define ASI_M_FLUSH_REGION 0x12 /* Flush I&D Cache Line (region); wo, ss */ -#define ASI_M_FLUSH_CTX 0x13 /* Flush I&D Cache Line (context); wo, ss */ -#define ASI_M_FLUSH_USER 0x14 /* Flush I&D Cache Line (user); wo, ss */ - -/* Block-copy operations are available only on certain V8 cpus. */ -#define ASI_M_BCOPY 0x17 /* Block copy */ - -/* These affect only the ICACHE and are Ross HyperSparc and TurboSparc specific. */ -#define ASI_M_IFLUSH_PAGE 0x18 /* Flush I Cache Line (page); wo, ss */ -#define ASI_M_IFLUSH_SEG 0x19 /* Flush I Cache Line (seg); wo, ss */ -#define ASI_M_IFLUSH_REGION 0x1A /* Flush I Cache Line (region); wo, ss */ -#define ASI_M_IFLUSH_CTX 0x1B /* Flush I Cache Line (context); wo, ss */ -#define ASI_M_IFLUSH_USER 0x1C /* Flush I Cache Line (user); wo, ss */ - -/* Block-fill operations are available on certain V8 cpus */ -#define ASI_M_BFILL 0x1F - -/* This allows direct access to main memory, actually 0x20 to 0x2f are - * the available ASI's for physical ram pass-through, but I don't have - * any idea what the other ones do.... - */ - -#define ASI_M_BYPASS 0x20 /* Reference MMU bypass; rw, as */ -#define ASI_M_FBMEM 0x29 /* Graphics card frame buffer access */ -#define ASI_M_VMEUS 0x2A /* VME user 16-bit access */ -#define ASI_M_VMEPS 0x2B /* VME priv 16-bit access */ -#define ASI_M_VMEUT 0x2C /* VME user 32-bit access */ -#define ASI_M_VMEPT 0x2D /* VME priv 32-bit access */ -#define ASI_M_SBUS 0x2E /* Direct SBus access */ -#define ASI_M_CTL 0x2F /* Control Space (ECC and MXCC are here) */ - - -/* This is ROSS HyperSparc only. */ -#define ASI_M_FLUSH_IWHOLE 0x31 /* Flush entire ICACHE; wo, ss */ - -/* Tsunami/Viking/TurboSparc i/d cache flash clear. */ -#define ASI_M_IC_FLCLEAR 0x36 -#define ASI_M_DC_FLCLEAR 0x37 - -#define ASI_M_DCDR 0x39 /* Data Cache Diagnostics Register rw, ss */ - -#define ASI_M_VIKING_TMP1 0x40 /* Emulation temporary 1 on Viking */ -/* only available on SuperSparc I */ -/* #define ASI_M_VIKING_TMP2 0x41 */ /* Emulation temporary 2 on Viking */ - -#define ASI_M_ACTION 0x4c /* Breakpoint Action Register (GNU/Viking) */ - -#endif /* _SPARC_ASI_H */ diff --git a/include/asm-sparc/asmmacro.h b/include/asm-sparc/asmmacro.h deleted file mode 100644 index a619a4d97aae..000000000000 --- a/include/asm-sparc/asmmacro.h +++ /dev/null @@ -1,45 +0,0 @@ -/* asmmacro.h: Assembler macros. - * - * Copyright (C) 1996 David S. Miller (davem@caipfs.rutgers.edu) - */ - -#ifndef _SPARC_ASMMACRO_H -#define _SPARC_ASMMACRO_H - -#include <asm/btfixup.h> -#include <asm/asi.h> - -#define GET_PROCESSOR4M_ID(reg) \ - rd %tbr, %reg; \ - srl %reg, 12, %reg; \ - and %reg, 3, %reg; - -#define GET_PROCESSOR4D_ID(reg) \ - lda [%g0] ASI_M_VIKING_TMP1, %reg; - -/* All trap entry points _must_ begin with this macro or else you - * lose. It makes sure the kernel has a proper window so that - * c-code can be called. - */ -#define SAVE_ALL_HEAD \ - sethi %hi(trap_setup), %l4; \ - jmpl %l4 + %lo(trap_setup), %l6; -#define SAVE_ALL \ - SAVE_ALL_HEAD \ - nop; - -/* All traps low-level code here must end with this macro. */ -#define RESTORE_ALL b ret_trap_entry; clr %l6; - -/* sun4 probably wants half word accesses to ASI_SEGMAP, while sun4c+ - likes byte accesses. These are to avoid ifdef mania. */ - -#ifdef CONFIG_SUN4 -#define lduXa lduha -#define stXa stha -#else -#define lduXa lduba -#define stXa stba -#endif - -#endif /* !(_SPARC_ASMMACRO_H) */ diff --git a/include/asm-sparc/atomic.h b/include/asm-sparc/atomic.h deleted file mode 100644 index 5c944b5a8040..000000000000 --- a/include/asm-sparc/atomic.h +++ /dev/null @@ -1,165 +0,0 @@ -/* atomic.h: These still suck, but the I-cache hit rate is higher. - * - * Copyright (C) 1996 David S. Miller (davem@davemloft.net) - * Copyright (C) 2000 Anton Blanchard (anton@linuxcare.com.au) - * Copyright (C) 2007 Kyle McMartin (kyle@parisc-linux.org) - * - * Additions by Keith M Wesolowski (wesolows@foobazco.org) based - * on asm-parisc/atomic.h Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>. - */ - -#ifndef __ARCH_SPARC_ATOMIC__ -#define __ARCH_SPARC_ATOMIC__ - -#include <linux/types.h> - -typedef struct { volatile int counter; } atomic_t; - -#ifdef __KERNEL__ - -#define ATOMIC_INIT(i) { (i) } - -extern int __atomic_add_return(int, atomic_t *); -extern int atomic_cmpxchg(atomic_t *, int, int); -#define atomic_xchg(v, new) (xchg(&((v)->counter), new)) -extern int atomic_add_unless(atomic_t *, int, int); -extern void atomic_set(atomic_t *, int); - -#define atomic_read(v) ((v)->counter) - -#define atomic_add(i, v) ((void)__atomic_add_return( (int)(i), (v))) -#define atomic_sub(i, v) ((void)__atomic_add_return(-(int)(i), (v))) -#define atomic_inc(v) ((void)__atomic_add_return( 1, (v))) -#define atomic_dec(v) ((void)__atomic_add_return( -1, (v))) - -#define atomic_add_return(i, v) (__atomic_add_return( (int)(i), (v))) -#define atomic_sub_return(i, v) (__atomic_add_return(-(int)(i), (v))) -#define atomic_inc_return(v) (__atomic_add_return( 1, (v))) -#define atomic_dec_return(v) (__atomic_add_return( -1, (v))) - -#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0) - -/* - * atomic_inc_and_test - increment and test - * @v: pointer of type atomic_t - * - * Atomically increments @v by 1 - * and returns true if the result is zero, or false for all - * other cases. - */ -#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0) - -#define atomic_dec_and_test(v) (atomic_dec_return(v) == 0) -#define atomic_sub_and_test(i, v) (atomic_sub_return(i, v) == 0) - -#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) - -/* This is the old 24-bit implementation. It's still used internally - * by some sparc-specific code, notably the semaphore implementation. - */ -typedef struct { volatile int counter; } atomic24_t; - -#ifndef CONFIG_SMP - -#define ATOMIC24_INIT(i) { (i) } -#define atomic24_read(v) ((v)->counter) -#define atomic24_set(v, i) (((v)->counter) = i) - -#else -/* We do the bulk of the actual work out of line in two common - * routines in assembler, see arch/sparc/lib/atomic.S for the - * "fun" details. - * - * For SMP the trick is you embed the spin lock byte within - * the word, use the low byte so signedness is easily retained - * via a quick arithmetic shift. It looks like this: - * - * ---------------------------------------- - * | signed 24-bit counter value | lock | atomic_t - * ---------------------------------------- - * 31 8 7 0 - */ - -#define ATOMIC24_INIT(i) { ((i) << 8) } - -static inline int atomic24_read(const atomic24_t *v) -{ - int ret = v->counter; - - while(ret & 0xff) - ret = v->counter; - - return ret >> 8; -} - -#define atomic24_set(v, i) (((v)->counter) = ((i) << 8)) -#endif - -static inline int __atomic24_add(int i, atomic24_t *v) -{ - register volatile int *ptr asm("g1"); - register int increment asm("g2"); - register int tmp1 asm("g3"); - register int tmp2 asm("g4"); - register int tmp3 asm("g7"); - - ptr = &v->counter; - increment = i; - - __asm__ __volatile__( - "mov %%o7, %%g4\n\t" - "call ___atomic24_add\n\t" - " add %%o7, 8, %%o7\n" - : "=&r" (increment), "=r" (tmp1), "=r" (tmp2), "=r" (tmp3) - : "0" (increment), "r" (ptr) - : "memory", "cc"); - - return increment; -} - -static inline int __atomic24_sub(int i, atomic24_t *v) -{ - register volatile int *ptr asm("g1"); - register int increment asm("g2"); - register int tmp1 asm("g3"); - register int tmp2 asm("g4"); - register int tmp3 asm("g7"); - - ptr = &v->counter; - increment = i; - - __asm__ __volatile__( - "mov %%o7, %%g4\n\t" - "call ___atomic24_sub\n\t" - " add %%o7, 8, %%o7\n" - : "=&r" (increment), "=r" (tmp1), "=r" (tmp2), "=r" (tmp3) - : "0" (increment), "r" (ptr) - : "memory", "cc"); - - return increment; -} - -#define atomic24_add(i, v) ((void)__atomic24_add((i), (v))) -#define atomic24_sub(i, v) ((void)__atomic24_sub((i), (v))) - -#define atomic24_dec_return(v) __atomic24_sub(1, (v)) -#define atomic24_inc_return(v) __atomic24_add(1, (v)) - -#define atomic24_sub_and_test(i, v) (__atomic24_sub((i), (v)) == 0) -#define atomic24_dec_and_test(v) (__atomic24_sub(1, (v)) == 0) - -#define atomic24_inc(v) ((void)__atomic24_add(1, (v))) -#define atomic24_dec(v) ((void)__atomic24_sub(1, (v))) - -#define atomic24_add_negative(i, v) (__atomic24_add((i), (v)) < 0) - -/* Atomic operations are already serializing */ -#define smp_mb__before_atomic_dec() barrier() -#define smp_mb__after_atomic_dec() barrier() -#define smp_mb__before_atomic_inc() barrier() -#define smp_mb__after_atomic_inc() barrier() - -#endif /* !(__KERNEL__) */ - -#include <asm-generic/atomic.h> -#endif /* !(__ARCH_SPARC_ATOMIC__) */ diff --git a/include/asm-sparc/auxio.h b/include/asm-sparc/auxio.h deleted file mode 100644 index e552b8d68450..000000000000 --- a/include/asm-sparc/auxio.h +++ /dev/null @@ -1,89 +0,0 @@ -/* - * auxio.h: Definitions and code for the Auxiliary I/O register. - * - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - */ -#ifndef _SPARC_AUXIO_H -#define _SPARC_AUXIO_H - -#include <asm/system.h> -#include <asm/vaddrs.h> - -/* This register is an unsigned char in IO space. It does two things. - * First, it is used to control the front panel LED light on machines - * that have it (good for testing entry points to trap handlers and irq's) - * Secondly, it controls various floppy drive parameters. - */ -#define AUXIO_ORMEIN 0xf0 /* All writes must set these bits. */ -#define AUXIO_ORMEIN4M 0xc0 /* sun4m - All writes must set these bits. */ -#define AUXIO_FLPY_DENS 0x20 /* Floppy density, high if set. Read only. */ -#define AUXIO_FLPY_DCHG 0x10 /* A disk change occurred. Read only. */ -#define AUXIO_EDGE_ON 0x10 /* sun4m - On means Jumper block is in. */ -#define AUXIO_FLPY_DSEL 0x08 /* Drive select/start-motor. Write only. */ -#define AUXIO_LINK_TEST 0x08 /* sun4m - On means TPE Carrier detect. */ - -/* Set the following to one, then zero, after doing a pseudo DMA transfer. */ -#define AUXIO_FLPY_TCNT 0x04 /* Floppy terminal count. Write only. */ - -/* Set the following to zero to eject the floppy. */ -#define AUXIO_FLPY_EJCT 0x02 /* Eject floppy disk. Write only. */ -#define AUXIO_LED 0x01 /* On if set, off if unset. Read/Write */ - -#ifndef __ASSEMBLY__ - -/* - * NOTE: these routines are implementation dependent-- - * understand the hardware you are querying! - */ -extern void set_auxio(unsigned char bits_on, unsigned char bits_off); -extern unsigned char get_auxio(void); /* .../asm-sparc/floppy.h */ - -/* - * The following routines are provided for driver-compatibility - * with sparc64 (primarily sunlance.c) - */ - -#define AUXIO_LTE_ON 1 -#define AUXIO_LTE_OFF 0 - -/* auxio_set_lte - Set Link Test Enable (TPE Link Detect) - * - * on - AUXIO_LTE_ON or AUXIO_LTE_OFF - */ -#define auxio_set_lte(on) \ -do { \ - if(on) { \ - set_auxio(AUXIO_LINK_TEST, 0); \ - } else { \ - set_auxio(0, AUXIO_LINK_TEST); \ - } \ -} while (0) - -#define AUXIO_LED_ON 1 -#define AUXIO_LED_OFF 0 - -/* auxio_set_led - Set system front panel LED - * - * on - AUXIO_LED_ON or AUXIO_LED_OFF - */ -#define auxio_set_led(on) \ -do { \ - if(on) { \ - set_auxio(AUXIO_LED, 0); \ - } else { \ - set_auxio(0, AUXIO_LED); \ - } \ -} while (0) - -#endif /* !(__ASSEMBLY__) */ - - -/* AUXIO2 (Power Off Control) */ -extern __volatile__ unsigned char * auxio_power_register; - -#define AUXIO_POWER_DETECT_FAILURE 32 -#define AUXIO_POWER_CLEAR_FAILURE 2 -#define AUXIO_POWER_OFF 1 - - -#endif /* !(_SPARC_AUXIO_H) */ diff --git a/include/asm-sparc/auxvec.h b/include/asm-sparc/auxvec.h deleted file mode 100644 index ad6f360261f6..000000000000 --- a/include/asm-sparc/auxvec.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef __ASMSPARC_AUXVEC_H -#define __ASMSPARC_AUXVEC_H - -#endif /* !(__ASMSPARC_AUXVEC_H) */ diff --git a/include/asm-sparc/bitext.h b/include/asm-sparc/bitext.h deleted file mode 100644 index 297b2f2fcb49..000000000000 --- a/include/asm-sparc/bitext.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * bitext.h: Bit string operations on the sparc, specific to architecture. - * - * Copyright 2002 Pete Zaitcev <zaitcev@yahoo.com> - */ - -#ifndef _SPARC_BITEXT_H -#define _SPARC_BITEXT_H - -#include <linux/spinlock.h> - -struct bit_map { - spinlock_t lock; - unsigned long *map; - int size; - int used; - int last_off; - int last_size; - int first_free; - int num_colors; -}; - -extern int bit_map_string_get(struct bit_map *t, int len, int align); -extern void bit_map_clear(struct bit_map *t, int offset, int len); -extern void bit_map_init(struct bit_map *t, unsigned long *map, int size); - -#endif /* defined(_SPARC_BITEXT_H) */ diff --git a/include/asm-sparc/bitops.h b/include/asm-sparc/bitops.h deleted file mode 100644 index 68b98a7e6454..000000000000 --- a/include/asm-sparc/bitops.h +++ /dev/null @@ -1,111 +0,0 @@ -/* - * bitops.h: Bit string operations on the Sparc. - * - * Copyright 1995 David S. Miller (davem@caip.rutgers.edu) - * Copyright 1996 Eddie C. Dost (ecd@skynet.be) - * Copyright 2001 Anton Blanchard (anton@samba.org) - */ - -#ifndef _SPARC_BITOPS_H -#define _SPARC_BITOPS_H - -#include <linux/compiler.h> -#include <asm/byteorder.h> - -#ifdef __KERNEL__ - -#ifndef _LINUX_BITOPS_H -#error only <linux/bitops.h> can be included directly -#endif - -extern unsigned long ___set_bit(unsigned long *addr, unsigned long mask); -extern unsigned long ___clear_bit(unsigned long *addr, unsigned long mask); -extern unsigned long ___change_bit(unsigned long *addr, unsigned long mask); - -/* - * Set bit 'nr' in 32-bit quantity at address 'addr' where bit '0' - * is in the highest of the four bytes and bit '31' is the high bit - * within the first byte. Sparc is BIG-Endian. Unless noted otherwise - * all bit-ops return 0 if bit was previously clear and != 0 otherwise. - */ -static inline int test_and_set_bit(unsigned long nr, volatile unsigned long *addr) -{ - unsigned long *ADDR, mask; - - ADDR = ((unsigned long *) addr) + (nr >> 5); - mask = 1 << (nr & 31); - - return ___set_bit(ADDR, mask) != 0; -} - -static inline void set_bit(unsigned long nr, volatile unsigned long *addr) -{ - unsigned long *ADDR, mask; - - ADDR = ((unsigned long *) addr) + (nr >> 5); - mask = 1 << (nr & 31); - - (void) ___set_bit(ADDR, mask); -} - -static inline int test_and_clear_bit(unsigned long nr, volatile unsigned long *addr) -{ - unsigned long *ADDR, mask; - - ADDR = ((unsigned long *) addr) + (nr >> 5); - mask = 1 << (nr & 31); - - return ___clear_bit(ADDR, mask) != 0; -} - -static inline void clear_bit(unsigned long nr, volatile unsigned long *addr) -{ - unsigned long *ADDR, mask; - - ADDR = ((unsigned long *) addr) + (nr >> 5); - mask = 1 << (nr & 31); - - (void) ___clear_bit(ADDR, mask); -} - -static inline int test_and_change_bit(unsigned long nr, volatile unsigned long *addr) -{ - unsigned long *ADDR, mask; - - ADDR = ((unsigned long *) addr) + (nr >> 5); - mask = 1 << (nr & 31); - - return ___change_bit(ADDR, mask) != 0; -} - -static inline void change_bit(unsigned long nr, volatile unsigned long *addr) -{ - unsigned long *ADDR, mask; - - ADDR = ((unsigned long *) addr) + (nr >> 5); - mask = 1 << (nr & 31); - - (void) ___change_bit(ADDR, mask); -} - -#include <asm-generic/bitops/non-atomic.h> - -#define smp_mb__before_clear_bit() do { } while(0) -#define smp_mb__after_clear_bit() do { } while(0) - -#include <asm-generic/bitops/ffz.h> -#include <asm-generic/bitops/__ffs.h> -#include <asm-generic/bitops/sched.h> -#include <asm-generic/bitops/ffs.h> -#include <asm-generic/bitops/fls.h> -#include <asm-generic/bitops/fls64.h> -#include <asm-generic/bitops/hweight.h> -#include <asm-generic/bitops/lock.h> -#include <asm-generic/bitops/find.h> -#include <asm-generic/bitops/ext2-non-atomic.h> -#include <asm-generic/bitops/ext2-atomic.h> -#include <asm-generic/bitops/minix.h> - -#endif /* __KERNEL__ */ - -#endif /* defined(_SPARC_BITOPS_H) */ diff --git a/include/asm-sparc/bpp.h b/include/asm-sparc/bpp.h deleted file mode 100644 index 31f515e499a7..000000000000 --- a/include/asm-sparc/bpp.h +++ /dev/null @@ -1,73 +0,0 @@ -#ifndef _SPARC_BPP_H -#define _SPARC_BPP_H - -/* - * Copyright (c) 1995 Picture Elements - * Stephen Williams - * Gus Baldauf - * - * Linux/SPARC port by Peter Zaitcev. - * Integration into SPARC tree by Tom Dyas. - */ - -#include <linux/ioctl.h> - -/* - * This is a driver that supports IEEE Std 1284-1994 communications - * with compliant or compatible devices. It will use whatever features - * the device supports, prefering those that are typically faster. - * - * When the device is opened, it is left in COMPATIBILITY mode, and - * writes work like any printer device. The driver only attempt to - * negotiate 1284 modes when needed so that plugs can be pulled, - * switch boxes switched, etc., without disrupting things. It will - * also leave the device in compatibility mode when closed. - */ - - - -/* - * This driver also supplies ioctls to manually manipulate the - * pins. This is great for testing devices, or writing code to deal - * with bizzarro-mode of the ACME Special TurboThingy Plus. - * - * NOTE: These ioctl currently do not interact well with - * read/write. Caveat emptor. - * - * PUT_PINS allows us to assign the sense of all the pins, including - * the data pins if being driven by the host. The GET_PINS returns the - * pins that the peripheral drives, including data if appropriate. - */ - -# define BPP_PUT_PINS _IOW('B', 1, int) -# define BPP_GET_PINS _IOR('B', 2, char) /* that's bogus - should've been _IO */ -# define BPP_PUT_DATA _IOW('B', 3, int) -# define BPP_GET_DATA _IOR('B', 4, char) /* ditto */ - -/* - * Set the data bus to input mode. Disengage the data bin driver and - * be prepared to read values from the peripheral. If the arg is 0, - * then revert the bus to output mode. - */ -# define BPP_SET_INPUT _IOW('B', 5, int) - -/* - * These bits apply to the PUT operation... - */ -# define BPP_PP_nStrobe 0x0001 -# define BPP_PP_nAutoFd 0x0002 -# define BPP_PP_nInit 0x0004 -# define BPP_PP_nSelectIn 0x0008 - -/* - * These apply to the GET operation, which also reads the current value - * of the previously put values. A bit mask of these will be returned - * as a bit mask in the return code of the ioctl(). - */ -# define BPP_GP_nAck 0x0100 -# define BPP_GP_Busy 0x0200 -# define BPP_GP_PError 0x0400 -# define BPP_GP_Select 0x0800 -# define BPP_GP_nFault 0x1000 - -#endif diff --git a/include/asm-sparc/btfixup.h b/include/asm-sparc/btfixup.h deleted file mode 100644 index 08277e6fb4cd..000000000000 --- a/include/asm-sparc/btfixup.h +++ /dev/null @@ -1,208 +0,0 @@ -/* - * asm-sparc/btfixup.h: Macros for boot time linking. - * - * Copyright (C) 1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz) - */ - -#ifndef _SPARC_BTFIXUP_H -#define _SPARC_BTFIXUP_H - -#include <linux/init.h> - -#ifndef __ASSEMBLY__ - -#ifdef MODULE -extern unsigned int ___illegal_use_of_BTFIXUP_SIMM13_in_module(void); -extern unsigned int ___illegal_use_of_BTFIXUP_SETHI_in_module(void); -extern unsigned int ___illegal_use_of_BTFIXUP_HALF_in_module(void); -extern unsigned int ___illegal_use_of_BTFIXUP_INT_in_module(void); - -#define BTFIXUP_SIMM13(__name) ___illegal_use_of_BTFIXUP_SIMM13_in_module() -#define BTFIXUP_HALF(__name) ___illegal_use_of_BTFIXUP_HALF_in_module() -#define BTFIXUP_SETHI(__name) ___illegal_use_of_BTFIXUP_SETHI_in_module() -#define BTFIXUP_INT(__name) ___illegal_use_of_BTFIXUP_INT_in_module() -#define BTFIXUP_BLACKBOX(__name) ___illegal_use_of_BTFIXUP_BLACKBOX_in_module - -#else - -#define BTFIXUP_SIMM13(__name) ___sf_##__name() -#define BTFIXUP_HALF(__name) ___af_##__name() -#define BTFIXUP_SETHI(__name) ___hf_##__name() -#define BTFIXUP_INT(__name) ((unsigned int)&___i_##__name) -/* This must be written in assembly and present in a sethi */ -#define BTFIXUP_BLACKBOX(__name) ___b_##__name -#endif /* MODULE */ - -/* Fixup call xx */ - -#define BTFIXUPDEF_CALL(__type, __name, __args...) \ - extern __type ___f_##__name(__args); \ - extern unsigned ___fs_##__name[3]; -#define BTFIXUPDEF_CALL_CONST(__type, __name, __args...) \ - extern __type ___f_##__name(__args) __attribute_const__; \ - extern unsigned ___fs_##__name[3]; -#define BTFIXUP_CALL(__name) ___f_##__name - -#define BTFIXUPDEF_BLACKBOX(__name) \ - extern unsigned ___bs_##__name[2]; - -/* Put bottom 13bits into some register variable */ - -#define BTFIXUPDEF_SIMM13(__name) \ - static inline unsigned int ___sf_##__name(void) __attribute_const__; \ - extern unsigned ___ss_##__name[2]; \ - static inline unsigned int ___sf_##__name(void) { \ - unsigned int ret; \ - __asm__ ("or %%g0, ___s_" #__name ", %0" : "=r"(ret)); \ - return ret; \ - } -#define BTFIXUPDEF_SIMM13_INIT(__name,__val) \ - static inline unsigned int ___sf_##__name(void) __attribute_const__; \ - extern unsigned ___ss_##__name[2]; \ - static inline unsigned int ___sf_##__name(void) { \ - unsigned int ret; \ - __asm__ ("or %%g0, ___s_" #__name "__btset_" #__val ", %0" : "=r"(ret));\ - return ret; \ - } - -/* Put either bottom 13 bits, or upper 22 bits into some register variable - * (depending on the value, this will lead into sethi FIX, reg; or - * mov FIX, reg; ) - */ - -#define BTFIXUPDEF_HALF(__name) \ - static inline unsigned int ___af_##__name(void) __attribute_const__; \ - extern unsigned ___as_##__name[2]; \ - static inline unsigned int ___af_##__name(void) { \ - unsigned int ret; \ - __asm__ ("or %%g0, ___a_" #__name ", %0" : "=r"(ret)); \ - return ret; \ - } -#define BTFIXUPDEF_HALF_INIT(__name,__val) \ - static inline unsigned int ___af_##__name(void) __attribute_const__; \ - extern unsigned ___as_##__name[2]; \ - static inline unsigned int ___af_##__name(void) { \ - unsigned int ret; \ - __asm__ ("or %%g0, ___a_" #__name "__btset_" #__val ", %0" : "=r"(ret));\ - return ret; \ - } - -/* Put upper 22 bits into some register variable */ - -#define BTFIXUPDEF_SETHI(__name) \ - static inline unsigned int ___hf_##__name(void) __attribute_const__; \ - extern unsigned ___hs_##__name[2]; \ - static inline unsigned int ___hf_##__name(void) { \ - unsigned int ret; \ - __asm__ ("sethi %%hi(___h_" #__name "), %0" : "=r"(ret)); \ - return ret; \ - } -#define BTFIXUPDEF_SETHI_INIT(__name,__val) \ - static inline unsigned int ___hf_##__name(void) __attribute_const__; \ - extern unsigned ___hs_##__name[2]; \ - static inline unsigned int ___hf_##__name(void) { \ - unsigned int ret; \ - __asm__ ("sethi %%hi(___h_" #__name "__btset_" #__val "), %0" : \ - "=r"(ret)); \ - return ret; \ - } - -/* Put a full 32bit integer into some register variable */ - -#define BTFIXUPDEF_INT(__name) \ - extern unsigned char ___i_##__name; \ - extern unsigned ___is_##__name[2]; - -#define BTFIXUPCALL_NORM 0x00000000 /* Always call */ -#define BTFIXUPCALL_NOP 0x01000000 /* Possibly optimize to nop */ -#define BTFIXUPCALL_RETINT(i) (0x90102000|((i) & 0x1fff)) /* Possibly optimize to mov i, %o0 */ -#define BTFIXUPCALL_ORINT(i) (0x90122000|((i) & 0x1fff)) /* Possibly optimize to or %o0, i, %o0 */ -#define BTFIXUPCALL_RETO0 0x01000000 /* Return first parameter, actually a nop */ -#define BTFIXUPCALL_ANDNINT(i) (0x902a2000|((i) & 0x1fff)) /* Possibly optimize to andn %o0, i, %o0 */ -#define BTFIXUPCALL_SWAPO0O1 0xd27a0000 /* Possibly optimize to swap [%o0],%o1 */ -#define BTFIXUPCALL_SWAPO0G0 0xc07a0000 /* Possibly optimize to swap [%o0],%g0 */ -#define BTFIXUPCALL_SWAPG1G2 0xc4784000 /* Possibly optimize to swap [%g1],%g2 */ -#define BTFIXUPCALL_STG0O0 0xc0220000 /* Possibly optimize to st %g0,[%o0] */ -#define BTFIXUPCALL_STO1O0 0xd2220000 /* Possibly optimize to st %o1,[%o0] */ - -#define BTFIXUPSET_CALL(__name, __addr, __insn) \ - do { \ - ___fs_##__name[0] |= 1; \ - ___fs_##__name[1] = (unsigned long)__addr; \ - ___fs_##__name[2] = __insn; \ - } while (0) - -#define BTFIXUPSET_BLACKBOX(__name, __func) \ - do { \ - ___bs_##__name[0] |= 1; \ - ___bs_##__name[1] = (unsigned long)__func; \ - } while (0) - -#define BTFIXUPCOPY_CALL(__name, __from) \ - do { \ - ___fs_##__name[0] |= 1; \ - ___fs_##__name[1] = ___fs_##__from[1]; \ - ___fs_##__name[2] = ___fs_##__from[2]; \ - } while (0) - -#define BTFIXUPSET_SIMM13(__name, __val) \ - do { \ - ___ss_##__name[0] |= 1; \ - ___ss_##__name[1] = (unsigned)__val; \ - } while (0) - -#define BTFIXUPCOPY_SIMM13(__name, __from) \ - do { \ - ___ss_##__name[0] |= 1; \ - ___ss_##__name[1] = ___ss_##__from[1]; \ - } while (0) - -#define BTFIXUPSET_HALF(__name, __val) \ - do { \ - ___as_##__name[0] |= 1; \ - ___as_##__name[1] = (unsigned)__val; \ - } while (0) - -#define BTFIXUPCOPY_HALF(__name, __from) \ - do { \ - ___as_##__name[0] |= 1; \ - ___as_##__name[1] = ___as_##__from[1]; \ - } while (0) - -#define BTFIXUPSET_SETHI(__name, __val) \ - do { \ - ___hs_##__name[0] |= 1; \ - ___hs_##__name[1] = (unsigned)__val; \ - } while (0) - -#define BTFIXUPCOPY_SETHI(__name, __from) \ - do { \ - ___hs_##__name[0] |= 1; \ - ___hs_##__name[1] = ___hs_##__from[1]; \ - } while (0) - -#define BTFIXUPSET_INT(__name, __val) \ - do { \ - ___is_##__name[0] |= 1; \ - ___is_##__name[1] = (unsigned)__val; \ - } while (0) - -#define BTFIXUPCOPY_INT(__name, __from) \ - do { \ - ___is_##__name[0] |= 1; \ - ___is_##__name[1] = ___is_##__from[1]; \ - } while (0) - -#define BTFIXUPVAL_CALL(__name) \ - ((unsigned long)___fs_##__name[1]) - -extern void btfixup(void); - -#else /* __ASSEMBLY__ */ - -#define BTFIXUP_SETHI(__name) %hi(___h_ ## __name) -#define BTFIXUP_SETHI_INIT(__name,__val) %hi(___h_ ## __name ## __btset_ ## __val) - -#endif /* __ASSEMBLY__ */ - -#endif /* !(_SPARC_BTFIXUP_H) */ diff --git a/include/asm-sparc/bug.h b/include/asm-sparc/bug.h deleted file mode 100644 index 8a59e5a8c217..000000000000 --- a/include/asm-sparc/bug.h +++ /dev/null @@ -1,22 +0,0 @@ -#ifndef _SPARC_BUG_H -#define _SPARC_BUG_H - -#ifdef CONFIG_BUG -#include <linux/compiler.h> - -#ifdef CONFIG_DEBUG_BUGVERBOSE -extern void do_BUG(const char *file, int line); -#define BUG() do { \ - do_BUG(__FILE__, __LINE__); \ - __builtin_trap(); \ -} while (0) -#else -#define BUG() __builtin_trap() -#endif - -#define HAVE_ARCH_BUG -#endif - -#include <asm-generic/bug.h> - -#endif diff --git a/include/asm-sparc/bugs.h b/include/asm-sparc/bugs.h deleted file mode 100644 index 2dfc07bc8e54..000000000000 --- a/include/asm-sparc/bugs.h +++ /dev/null @@ -1,24 +0,0 @@ -/* include/asm-sparc/bugs.h: Sparc probes for various bugs. - * - * Copyright (C) 1996, 2007 David S. Miller (davem@davemloft.net) - */ - -#ifdef CONFIG_SPARC32 -#include <asm/cpudata.h> -#endif - -#ifdef CONFIG_SPARC64 -#include <asm/sstate.h> -#endif - -extern unsigned long loops_per_jiffy; - -static void __init check_bugs(void) -{ -#if defined(CONFIG_SPARC32) && !defined(CONFIG_SMP) - cpu_data(0).udelay_val = loops_per_jiffy; -#endif -#ifdef CONFIG_SPARC64 - sstate_running(); -#endif -} diff --git a/include/asm-sparc/byteorder.h b/include/asm-sparc/byteorder.h deleted file mode 100644 index bcd83aa351c5..000000000000 --- a/include/asm-sparc/byteorder.h +++ /dev/null @@ -1,57 +0,0 @@ -#ifndef _SPARC_BYTEORDER_H -#define _SPARC_BYTEORDER_H - -#include <asm/types.h> -#include <asm/asi.h> - -#ifdef __GNUC__ - -#ifdef CONFIG_SPARC32 -#define __SWAB_64_THRU_32__ -#endif - -#ifdef CONFIG_SPARC64 - -static inline __u16 ___arch__swab16p(const __u16 *addr) -{ - __u16 ret; - - __asm__ __volatile__ ("lduha [%1] %2, %0" - : "=r" (ret) - : "r" (addr), "i" (ASI_PL)); - return ret; -} - -static inline __u32 ___arch__swab32p(const __u32 *addr) -{ - __u32 ret; - - __asm__ __volatile__ ("lduwa [%1] %2, %0" - : "=r" (ret) - : "r" (addr), "i" (ASI_PL)); - return ret; -} - -static inline __u64 ___arch__swab64p(const __u64 *addr) -{ - __u64 ret; - - __asm__ __volatile__ ("ldxa [%1] %2, %0" - : "=r" (ret) - : "r" (addr), "i" (ASI_PL)); - return ret; -} - -#define __arch__swab16p(x) ___arch__swab16p(x) -#define __arch__swab32p(x) ___arch__swab32p(x) -#define __arch__swab64p(x) ___arch__swab64p(x) - -#endif /* CONFIG_SPARC64 */ - -#define __BYTEORDER_HAS_U64__ - -#endif - -#include <linux/byteorder/big_endian.h> - -#endif /* _SPARC_BYTEORDER_H */ diff --git a/include/asm-sparc/cache.h b/include/asm-sparc/cache.h deleted file mode 100644 index 41f85ae4bd4a..000000000000 --- a/include/asm-sparc/cache.h +++ /dev/null @@ -1,138 +0,0 @@ -/* cache.h: Cache specific code for the Sparc. These include flushing - * and direct tag/data line access. - * - * Copyright (C) 1995, 2007 David S. Miller (davem@davemloft.net) - */ - -#ifndef _SPARC_CACHE_H -#define _SPARC_CACHE_H - -#define L1_CACHE_SHIFT 5 -#define L1_CACHE_BYTES 32 -#define L1_CACHE_ALIGN(x) ((((x)+(L1_CACHE_BYTES-1))&~(L1_CACHE_BYTES-1))) - -#ifdef CONFIG_SPARC32 -#define SMP_CACHE_BYTES_SHIFT 5 -#else -#define SMP_CACHE_BYTES_SHIFT 6 -#endif - -#define SMP_CACHE_BYTES (1 << SMP_CACHE_BYTES_SHIFT) - -#define __read_mostly __attribute__((__section__(".data.read_mostly"))) - -#ifdef CONFIG_SPARC32 -#include <asm/asi.h> - -/* Direct access to the instruction cache is provided through and - * alternate address space. The IDC bit must be off in the ICCR on - * HyperSparcs for these accesses to work. The code below does not do - * any checking, the caller must do so. These routines are for - * diagnostics only, but could end up being useful. Use with care. - * Also, you are asking for trouble if you execute these in one of the - * three instructions following a %asr/%psr access or modification. - */ - -/* First, cache-tag access. */ -static inline unsigned int get_icache_tag(int setnum, int tagnum) -{ - unsigned int vaddr, retval; - - vaddr = ((setnum&1) << 12) | ((tagnum&0x7f) << 5); - __asm__ __volatile__("lda [%1] %2, %0\n\t" : - "=r" (retval) : - "r" (vaddr), "i" (ASI_M_TXTC_TAG)); - return retval; -} - -static inline void put_icache_tag(int setnum, int tagnum, unsigned int entry) -{ - unsigned int vaddr; - - vaddr = ((setnum&1) << 12) | ((tagnum&0x7f) << 5); - __asm__ __volatile__("sta %0, [%1] %2\n\t" : : - "r" (entry), "r" (vaddr), "i" (ASI_M_TXTC_TAG) : - "memory"); -} - -/* Second cache-data access. The data is returned two-32bit quantities - * at a time. - */ -static inline void get_icache_data(int setnum, int tagnum, int subblock, - unsigned int *data) -{ - unsigned int value1, value2, vaddr; - - vaddr = ((setnum&0x1) << 12) | ((tagnum&0x7f) << 5) | - ((subblock&0x3) << 3); - __asm__ __volatile__("ldda [%2] %3, %%g2\n\t" - "or %%g0, %%g2, %0\n\t" - "or %%g0, %%g3, %1\n\t" : - "=r" (value1), "=r" (value2) : - "r" (vaddr), "i" (ASI_M_TXTC_DATA) : - "g2", "g3"); - data[0] = value1; data[1] = value2; -} - -static inline void put_icache_data(int setnum, int tagnum, int subblock, - unsigned int *data) -{ - unsigned int value1, value2, vaddr; - - vaddr = ((setnum&0x1) << 12) | ((tagnum&0x7f) << 5) | - ((subblock&0x3) << 3); - value1 = data[0]; value2 = data[1]; - __asm__ __volatile__("or %%g0, %0, %%g2\n\t" - "or %%g0, %1, %%g3\n\t" - "stda %%g2, [%2] %3\n\t" : : - "r" (value1), "r" (value2), - "r" (vaddr), "i" (ASI_M_TXTC_DATA) : - "g2", "g3", "memory" /* no joke */); -} - -/* Different types of flushes with the ICACHE. Some of the flushes - * affect both the ICACHE and the external cache. Others only clear - * the ICACHE entries on the cpu itself. V8's (most) allow - * granularity of flushes on the packet (element in line), whole line, - * and entire cache (ie. all lines) level. The ICACHE only flushes are - * ROSS HyperSparc specific and are in ross.h - */ - -/* Flushes which clear out both the on-chip and external caches */ -static inline void flush_ei_page(unsigned int addr) -{ - __asm__ __volatile__("sta %%g0, [%0] %1\n\t" : : - "r" (addr), "i" (ASI_M_FLUSH_PAGE) : - "memory"); -} - -static inline void flush_ei_seg(unsigned int addr) -{ - __asm__ __volatile__("sta %%g0, [%0] %1\n\t" : : - "r" (addr), "i" (ASI_M_FLUSH_SEG) : - "memory"); -} - -static inline void flush_ei_region(unsigned int addr) -{ - __asm__ __volatile__("sta %%g0, [%0] %1\n\t" : : - "r" (addr), "i" (ASI_M_FLUSH_REGION) : - "memory"); -} - -static inline void flush_ei_ctx(unsigned int addr) -{ - __asm__ __volatile__("sta %%g0, [%0] %1\n\t" : : - "r" (addr), "i" (ASI_M_FLUSH_CTX) : - "memory"); -} - -static inline void flush_ei_user(unsigned int addr) -{ - __asm__ __volatile__("sta %%g0, [%0] %1\n\t" : : - "r" (addr), "i" (ASI_M_FLUSH_USER) : - "memory"); -} -#endif /* CONFIG_SPARC32 */ - -#endif /* !(_SPARC_CACHE_H) */ diff --git a/include/asm-sparc/cacheflush.h b/include/asm-sparc/cacheflush.h deleted file mode 100644 index 68ac10910271..000000000000 --- a/include/asm-sparc/cacheflush.h +++ /dev/null @@ -1,85 +0,0 @@ -#ifndef _SPARC_CACHEFLUSH_H -#define _SPARC_CACHEFLUSH_H - -#include <linux/mm.h> /* Common for other includes */ -// #include <linux/kernel.h> from pgalloc.h -// #include <linux/sched.h> from pgalloc.h - -// #include <asm/page.h> -#include <asm/btfixup.h> - -/* - * Fine grained cache flushing. - */ -#ifdef CONFIG_SMP - -BTFIXUPDEF_CALL(void, local_flush_cache_all, void) -BTFIXUPDEF_CALL(void, local_flush_cache_mm, struct mm_struct *) -BTFIXUPDEF_CALL(void, local_flush_cache_range, struct vm_area_struct *, unsigned long, unsigned long) -BTFIXUPDEF_CALL(void, local_flush_cache_page, struct vm_area_struct *, unsigned long) - -#define local_flush_cache_all() BTFIXUP_CALL(local_flush_cache_all)() -#define local_flush_cache_mm(mm) BTFIXUP_CALL(local_flush_cache_mm)(mm) -#define local_flush_cache_range(vma,start,end) BTFIXUP_CALL(local_flush_cache_range)(vma,start,end) -#define local_flush_cache_page(vma,addr) BTFIXUP_CALL(local_flush_cache_page)(vma,addr) - -BTFIXUPDEF_CALL(void, local_flush_page_to_ram, unsigned long) -BTFIXUPDEF_CALL(void, local_flush_sig_insns, struct mm_struct *, unsigned long) - -#define local_flush_page_to_ram(addr) BTFIXUP_CALL(local_flush_page_to_ram)(addr) -#define local_flush_sig_insns(mm,insn_addr) BTFIXUP_CALL(local_flush_sig_insns)(mm,insn_addr) - -extern void smp_flush_cache_all(void); -extern void smp_flush_cache_mm(struct mm_struct *mm); -extern void smp_flush_cache_range(struct vm_area_struct *vma, - unsigned long start, - unsigned long end); -extern void smp_flush_cache_page(struct vm_area_struct *vma, unsigned long page); - -extern void smp_flush_page_to_ram(unsigned long page); -extern void smp_flush_sig_insns(struct mm_struct *mm, unsigned long insn_addr); - -#endif /* CONFIG_SMP */ - -BTFIXUPDEF_CALL(void, flush_cache_all, void) -BTFIXUPDEF_CALL(void, flush_cache_mm, struct mm_struct *) -BTFIXUPDEF_CALL(void, flush_cache_range, struct vm_area_struct *, unsigned long, unsigned long) -BTFIXUPDEF_CALL(void, flush_cache_page, struct vm_area_struct *, unsigned long) - -#define flush_cache_all() BTFIXUP_CALL(flush_cache_all)() -#define flush_cache_mm(mm) BTFIXUP_CALL(flush_cache_mm)(mm) -#define flush_cache_dup_mm(mm) BTFIXUP_CALL(flush_cache_mm)(mm) -#define flush_cache_range(vma,start,end) BTFIXUP_CALL(flush_cache_range)(vma,start,end) -#define flush_cache_page(vma,addr,pfn) BTFIXUP_CALL(flush_cache_page)(vma,addr) -#define flush_icache_range(start, end) do { } while (0) -#define flush_icache_page(vma, pg) do { } while (0) - -#define flush_icache_user_range(vma,pg,adr,len) do { } while (0) - -#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ - do { \ - flush_cache_page(vma, vaddr, page_to_pfn(page));\ - memcpy(dst, src, len); \ - } while (0) -#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ - do { \ - flush_cache_page(vma, vaddr, page_to_pfn(page));\ - memcpy(dst, src, len); \ - } while (0) - -BTFIXUPDEF_CALL(void, __flush_page_to_ram, unsigned long) -BTFIXUPDEF_CALL(void, flush_sig_insns, struct mm_struct *, unsigned long) - -#define __flush_page_to_ram(addr) BTFIXUP_CALL(__flush_page_to_ram)(addr) -#define flush_sig_insns(mm,insn_addr) BTFIXUP_CALL(flush_sig_insns)(mm,insn_addr) - -extern void sparc_flush_page_to_ram(struct page *page); - -#define flush_dcache_page(page) sparc_flush_page_to_ram(page) -#define flush_dcache_mmap_lock(mapping) do { } while (0) -#define flush_dcache_mmap_unlock(mapping) do { } while (0) - -#define flush_cache_vmap(start, end) flush_cache_all() -#define flush_cache_vunmap(start, end) flush_cache_all() - -#endif /* _SPARC_CACHEFLUSH_H */ diff --git a/include/asm-sparc/checksum.h b/include/asm-sparc/checksum.h deleted file mode 100644 index d044ddb5a3cf..000000000000 --- a/include/asm-sparc/checksum.h +++ /dev/null @@ -1,241 +0,0 @@ -#ifndef __SPARC_CHECKSUM_H -#define __SPARC_CHECKSUM_H - -/* checksum.h: IP/UDP/TCP checksum routines on the Sparc. - * - * Copyright(C) 1995 Linus Torvalds - * Copyright(C) 1995 Miguel de Icaza - * Copyright(C) 1996 David S. Miller - * Copyright(C) 1996 Eddie C. Dost - * Copyright(C) 1997 Jakub Jelinek - * - * derived from: - * Alpha checksum c-code - * ix86 inline assembly - * RFC1071 Computing the Internet Checksum - */ - -#include <linux/in6.h> -#include <asm/uaccess.h> - -/* computes the checksum of a memory block at buff, length len, - * and adds in "sum" (32-bit) - * - * returns a 32-bit number suitable for feeding into itself - * or csum_tcpudp_magic - * - * this function must be called with even lengths, except - * for the last fragment, which may be odd - * - * it's best to have buff aligned on a 32-bit boundary - */ -extern __wsum csum_partial(const void *buff, int len, __wsum sum); - -/* the same as csum_partial, but copies from fs:src while it - * checksums - * - * here even more important to align src and dst on a 32-bit (or even - * better 64-bit) boundary - */ - -extern unsigned int __csum_partial_copy_sparc_generic (const unsigned char *, unsigned char *); - -static inline __wsum -csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum) -{ - register unsigned int ret asm("o0") = (unsigned int)src; - register char *d asm("o1") = dst; - register int l asm("g1") = len; - - __asm__ __volatile__ ( - "call __csum_partial_copy_sparc_generic\n\t" - " mov %6, %%g7\n" - : "=&r" (ret), "=&r" (d), "=&r" (l) - : "0" (ret), "1" (d), "2" (l), "r" (sum) - : "o2", "o3", "o4", "o5", "o7", - "g2", "g3", "g4", "g5", "g7", - "memory", "cc"); - return (__force __wsum)ret; -} - -static inline __wsum -csum_partial_copy_from_user(const void __user *src, void *dst, int len, - __wsum sum, int *err) - { - register unsigned long ret asm("o0") = (unsigned long)src; - register char *d asm("o1") = dst; - register int l asm("g1") = len; - register __wsum s asm("g7") = sum; - - __asm__ __volatile__ ( - ".section __ex_table,#alloc\n\t" - ".align 4\n\t" - ".word 1f,2\n\t" - ".previous\n" - "1:\n\t" - "call __csum_partial_copy_sparc_generic\n\t" - " st %8, [%%sp + 64]\n" - : "=&r" (ret), "=&r" (d), "=&r" (l), "=&r" (s) - : "0" (ret), "1" (d), "2" (l), "3" (s), "r" (err) - : "o2", "o3", "o4", "o5", "o7", "g2", "g3", "g4", "g5", - "cc", "memory"); - return (__force __wsum)ret; -} - -static inline __wsum -csum_partial_copy_to_user(const void *src, void __user *dst, int len, - __wsum sum, int *err) -{ - if (!access_ok (VERIFY_WRITE, dst, len)) { - *err = -EFAULT; - return sum; - } else { - register unsigned long ret asm("o0") = (unsigned long)src; - register char __user *d asm("o1") = dst; - register int l asm("g1") = len; - register __wsum s asm("g7") = sum; - - __asm__ __volatile__ ( - ".section __ex_table,#alloc\n\t" - ".align 4\n\t" - ".word 1f,1\n\t" - ".previous\n" - "1:\n\t" - "call __csum_partial_copy_sparc_generic\n\t" - " st %8, [%%sp + 64]\n" - : "=&r" (ret), "=&r" (d), "=&r" (l), "=&r" (s) - : "0" (ret), "1" (d), "2" (l), "3" (s), "r" (err) - : "o2", "o3", "o4", "o5", "o7", - "g2", "g3", "g4", "g5", - "cc", "memory"); - return (__force __wsum)ret; - } -} - -#define HAVE_CSUM_COPY_USER -#define csum_and_copy_to_user csum_partial_copy_to_user - -/* ihl is always 5 or greater, almost always is 5, and iph is word aligned - * the majority of the time. - */ -static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl) -{ - __sum16 sum; - - /* Note: We must read %2 before we touch %0 for the first time, - * because GCC can legitimately use the same register for - * both operands. - */ - __asm__ __volatile__("sub\t%2, 4, %%g4\n\t" - "ld\t[%1 + 0x00], %0\n\t" - "ld\t[%1 + 0x04], %%g2\n\t" - "ld\t[%1 + 0x08], %%g3\n\t" - "addcc\t%%g2, %0, %0\n\t" - "addxcc\t%%g3, %0, %0\n\t" - "ld\t[%1 + 0x0c], %%g2\n\t" - "ld\t[%1 + 0x10], %%g3\n\t" - "addxcc\t%%g2, %0, %0\n\t" - "addx\t%0, %%g0, %0\n" - "1:\taddcc\t%%g3, %0, %0\n\t" - "add\t%1, 4, %1\n\t" - "addxcc\t%0, %%g0, %0\n\t" - "subcc\t%%g4, 1, %%g4\n\t" - "be,a\t2f\n\t" - "sll\t%0, 16, %%g2\n\t" - "b\t1b\n\t" - "ld\t[%1 + 0x10], %%g3\n" - "2:\taddcc\t%0, %%g2, %%g2\n\t" - "srl\t%%g2, 16, %0\n\t" - "addx\t%0, %%g0, %0\n\t" - "xnor\t%%g0, %0, %0" - : "=r" (sum), "=&r" (iph) - : "r" (ihl), "1" (iph) - : "g2", "g3", "g4", "cc", "memory"); - return sum; -} - -/* Fold a partial checksum without adding pseudo headers. */ -static inline __sum16 csum_fold(__wsum sum) -{ - unsigned int tmp; - - __asm__ __volatile__("addcc\t%0, %1, %1\n\t" - "srl\t%1, 16, %1\n\t" - "addx\t%1, %%g0, %1\n\t" - "xnor\t%%g0, %1, %0" - : "=&r" (sum), "=r" (tmp) - : "0" (sum), "1" ((__force u32)sum<<16) - : "cc"); - return (__force __sum16)sum; -} - -static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr, - unsigned short len, - unsigned short proto, - __wsum sum) -{ - __asm__ __volatile__("addcc\t%1, %0, %0\n\t" - "addxcc\t%2, %0, %0\n\t" - "addxcc\t%3, %0, %0\n\t" - "addx\t%0, %%g0, %0\n\t" - : "=r" (sum), "=r" (saddr) - : "r" (daddr), "r" (proto + len), "0" (sum), - "1" (saddr) - : "cc"); - return sum; -} - -/* - * computes the checksum of the TCP/UDP pseudo-header - * returns a 16-bit checksum, already complemented - */ -static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr, - unsigned short len, - unsigned short proto, - __wsum sum) -{ - return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum)); -} - -#define _HAVE_ARCH_IPV6_CSUM - -static inline __sum16 csum_ipv6_magic(const struct in6_addr *saddr, - const struct in6_addr *daddr, - __u32 len, unsigned short proto, - __wsum sum) -{ - __asm__ __volatile__ ( - "addcc %3, %4, %%g4\n\t" - "addxcc %5, %%g4, %%g4\n\t" - "ld [%2 + 0x0c], %%g2\n\t" - "ld [%2 + 0x08], %%g3\n\t" - "addxcc %%g2, %%g4, %%g4\n\t" - "ld [%2 + 0x04], %%g2\n\t" - "addxcc %%g3, %%g4, %%g4\n\t" - "ld [%2 + 0x00], %%g3\n\t" - "addxcc %%g2, %%g4, %%g4\n\t" - "ld [%1 + 0x0c], %%g2\n\t" - "addxcc %%g3, %%g4, %%g4\n\t" - "ld [%1 + 0x08], %%g3\n\t" - "addxcc %%g2, %%g4, %%g4\n\t" - "ld [%1 + 0x04], %%g2\n\t" - "addxcc %%g3, %%g4, %%g4\n\t" - "ld [%1 + 0x00], %%g3\n\t" - "addxcc %%g2, %%g4, %%g4\n\t" - "addxcc %%g3, %%g4, %0\n\t" - "addx 0, %0, %0\n" - : "=&r" (sum) - : "r" (saddr), "r" (daddr), - "r"(htonl(len)), "r"(htonl(proto)), "r"(sum) - : "g2", "g3", "g4", "cc"); - - return csum_fold(sum); -} - -/* this routine is used for miscellaneous IP-like checksums, mainly in icmp.c */ -static inline __sum16 ip_compute_csum(const void *buff, int len) -{ - return csum_fold(csum_partial(buff, len, 0)); -} - -#endif /* !(__SPARC_CHECKSUM_H) */ diff --git a/include/asm-sparc/clock.h b/include/asm-sparc/clock.h deleted file mode 100644 index 2cf99dadec56..000000000000 --- a/include/asm-sparc/clock.h +++ /dev/null @@ -1,11 +0,0 @@ -/* - * clock.h: Definitions for clock operations on the Sparc. - * - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - */ -#ifndef _SPARC_CLOCK_H -#define _SPARC_CLOCK_H - -/* Foo for now. */ - -#endif /* !(_SPARC_CLOCK_H) */ diff --git a/include/asm-sparc/contregs.h b/include/asm-sparc/contregs.h deleted file mode 100644 index 48fa8a4ef357..000000000000 --- a/include/asm-sparc/contregs.h +++ /dev/null @@ -1,53 +0,0 @@ -#ifndef _SPARC_CONTREGS_H -#define _SPARC_CONTREGS_H - -/* contregs.h: Addresses of registers in the ASI_CONTROL alternate address - * space. These are for the mmu's context register, etc. - * - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - */ - -/* 3=sun3 - 4=sun4 (as in sun4 sysmaint student book) - c=sun4c (according to davem) */ - -#define AC_IDPROM 0x00000000 /* 34 ID PROM, R/O, byte, 32 bytes */ -#define AC_PAGEMAP 0x10000000 /* 3 Pagemap R/W, long */ -#define AC_SEGMAP 0x20000000 /* 3 Segment map, byte */ -#define AC_CONTEXT 0x30000000 /* 34c current mmu-context */ -#define AC_SENABLE 0x40000000 /* 34c system dvma/cache/reset enable reg*/ -#define AC_UDVMA_ENB 0x50000000 /* 34 Not used on Sun boards, byte */ -#define AC_BUS_ERROR 0x60000000 /* 34 Not cleared on read, byte. */ -#define AC_SYNC_ERR 0x60000000 /* c fault type */ -#define AC_SYNC_VA 0x60000004 /* c fault virtual address */ -#define AC_ASYNC_ERR 0x60000008 /* c asynchronous fault type */ -#define AC_ASYNC_VA 0x6000000c /* c async fault virtual address */ -#define AC_LEDS 0x70000000 /* 34 Zero turns on LEDs, byte */ -#define AC_CACHETAGS 0x80000000 /* 34c direct access to the VAC tags */ -#define AC_CACHEDDATA 0x90000000 /* 3 c direct access to the VAC data */ -#define AC_UDVMA_MAP 0xD0000000 /* 4 Not used on Sun boards, byte */ -#define AC_VME_VECTOR 0xE0000000 /* 4 For non-Autovector VME, byte */ -#define AC_BOOT_SCC 0xF0000000 /* 34 bypass to access Zilog 8530. byte.*/ - -/* s=Swift, h=Ross_HyperSPARC, v=TI_Viking, t=Tsunami, r=Ross_Cypress */ -#define AC_M_PCR 0x0000 /* shv Processor Control Reg */ -#define AC_M_CTPR 0x0100 /* shv Context Table Pointer Reg */ -#define AC_M_CXR 0x0200 /* shv Context Register */ -#define AC_M_SFSR 0x0300 /* shv Synchronous Fault Status Reg */ -#define AC_M_SFAR 0x0400 /* shv Synchronous Fault Address Reg */ -#define AC_M_AFSR 0x0500 /* hv Asynchronous Fault Status Reg */ -#define AC_M_AFAR 0x0600 /* hv Asynchronous Fault Address Reg */ -#define AC_M_RESET 0x0700 /* hv Reset Reg */ -#define AC_M_RPR 0x1000 /* hv Root Pointer Reg */ -#define AC_M_TSUTRCR 0x1000 /* s TLB Replacement Ctrl Reg */ -#define AC_M_IAPTP 0x1100 /* hv Instruction Access PTP */ -#define AC_M_DAPTP 0x1200 /* hv Data Access PTP */ -#define AC_M_ITR 0x1300 /* hv Index Tag Register */ -#define AC_M_TRCR 0x1400 /* hv TLB Replacement Control Reg */ -#define AC_M_SFSRX 0x1300 /* s Synch Fault Status Reg prim */ -#define AC_M_SFARX 0x1400 /* s Synch Fault Address Reg prim */ -#define AC_M_RPR1 0x1500 /* h Root Pointer Reg (entry 2) */ -#define AC_M_IAPTP1 0x1600 /* h Instruction Access PTP (entry 2) */ -#define AC_M_DAPTP1 0x1700 /* h Data Access PTP (entry 2) */ - -#endif /* _SPARC_CONTREGS_H */ diff --git a/include/asm-sparc/cpudata.h b/include/asm-sparc/cpudata.h deleted file mode 100644 index a2c4d51d36c4..000000000000 --- a/include/asm-sparc/cpudata.h +++ /dev/null @@ -1,27 +0,0 @@ -/* cpudata.h: Per-cpu parameters. - * - * Copyright (C) 2004 Keith M Wesolowski (wesolows@foobazco.org) - * - * Based on include/asm-sparc64/cpudata.h and Linux 2.4 smp.h - * both (C) David S. Miller. - */ - -#ifndef _SPARC_CPUDATA_H -#define _SPARC_CPUDATA_H - -#include <linux/percpu.h> - -typedef struct { - unsigned long udelay_val; - unsigned long clock_tick; - unsigned int multiplier; - unsigned int counter; - int prom_node; - int mid; - int next; -} cpuinfo_sparc; - -DECLARE_PER_CPU(cpuinfo_sparc, __cpu_data); -#define cpu_data(__cpu) per_cpu(__cpu_data, (__cpu)) - -#endif /* _SPARC_CPUDATA_H */ diff --git a/include/asm-sparc/cputime.h b/include/asm-sparc/cputime.h deleted file mode 100644 index 1a642b81e019..000000000000 --- a/include/asm-sparc/cputime.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __SPARC_CPUTIME_H -#define __SPARC_CPUTIME_H - -#include <asm-generic/cputime.h> - -#endif /* __SPARC_CPUTIME_H */ diff --git a/include/asm-sparc/current.h b/include/asm-sparc/current.h deleted file mode 100644 index 8a1d9d6643b0..000000000000 --- a/include/asm-sparc/current.h +++ /dev/null @@ -1,34 +0,0 @@ -/* include/asm-sparc/current.h - * - * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation - * Copyright (C) 2002 Pete Zaitcev (zaitcev@yahoo.com) - * Copyright (C) 2007 David S. Miller (davem@davemloft.net) - * - * Derived from "include/asm-s390/current.h" by - * Martin Schwidefsky (schwidefsky@de.ibm.com) - * Derived from "include/asm-i386/current.h" -*/ -#ifndef _SPARC_CURRENT_H -#define _SPARC_CURRENT_H - -#include <linux/thread_info.h> - -#ifdef CONFIG_SPARC64 -register struct task_struct *current asm("g4"); -#endif - -#ifdef CONFIG_SPARC32 -/* We might want to consider using %g4 like sparc64 to shave a few cycles. - * - * Two stage process (inline + #define) for type-checking. - * We also obfuscate get_current() to check if anyone used that by mistake. - */ -struct task_struct; -static inline struct task_struct *__get_current(void) -{ - return current_thread_info()->task; -} -#define current __get_current() -#endif - -#endif /* !(_SPARC_CURRENT_H) */ diff --git a/include/asm-sparc/cypress.h b/include/asm-sparc/cypress.h deleted file mode 100644 index 95e9772ea394..000000000000 --- a/include/asm-sparc/cypress.h +++ /dev/null @@ -1,79 +0,0 @@ -/* - * cypress.h: Cypress module specific definitions and defines. - * - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - */ - -#ifndef _SPARC_CYPRESS_H -#define _SPARC_CYPRESS_H - -/* Cypress chips have %psr 'impl' of '0001' and 'vers' of '0001'. */ - -/* The MMU control register fields on the Sparc Cypress 604/605 MMU's. - * - * --------------------------------------------------------------- - * |implvers| MCA | MCM |MV| MID |BM| C|RSV|MR|CM|CL|CE|RSV|NF|ME| - * --------------------------------------------------------------- - * 31 24 23-22 21-20 19 18-15 14 13 12 11 10 9 8 7-2 1 0 - * - * MCA: MultiChip Access -- Used for configuration of multiple - * CY7C604/605 cache units. - * MCM: MultiChip Mask -- Again, for multiple cache unit config. - * MV: MultiChip Valid -- Indicates MCM and MCA have valid settings. - * MID: ModuleID -- Unique processor ID for MBus transactions. (605 only) - * BM: Boot Mode -- 0 = not in boot mode, 1 = in boot mode - * C: Cacheable -- Indicates whether accesses are cacheable while - * the MMU is off. 0=no 1=yes - * MR: MemoryReflection -- Indicates whether the bus attached to the - * MBus supports memory reflection. 0=no 1=yes (605 only) - * CM: CacheMode -- Indicates whether the cache is operating in write - * through or copy-back mode. 0=write-through 1=copy-back - * CL: CacheLock -- Indicates if the entire cache is locked or not. - * 0=not-locked 1=locked (604 only) - * CE: CacheEnable -- Is the virtual cache on? 0=no 1=yes - * NF: NoFault -- Do faults generate traps? 0=yes 1=no - * ME: MmuEnable -- Is the MMU doing translations? 0=no 1=yes - */ - -#define CYPRESS_MCA 0x00c00000 -#define CYPRESS_MCM 0x00300000 -#define CYPRESS_MVALID 0x00080000 -#define CYPRESS_MIDMASK 0x00078000 /* Only on 605 */ -#define CYPRESS_BMODE 0x00004000 -#define CYPRESS_ACENABLE 0x00002000 -#define CYPRESS_MRFLCT 0x00000800 /* Only on 605 */ -#define CYPRESS_CMODE 0x00000400 -#define CYPRESS_CLOCK 0x00000200 /* Only on 604 */ -#define CYPRESS_CENABLE 0x00000100 -#define CYPRESS_NFAULT 0x00000002 -#define CYPRESS_MENABLE 0x00000001 - -static inline void cypress_flush_page(unsigned long page) -{ - __asm__ __volatile__("sta %%g0, [%0] %1\n\t" : : - "r" (page), "i" (ASI_M_FLUSH_PAGE)); -} - -static inline void cypress_flush_segment(unsigned long addr) -{ - __asm__ __volatile__("sta %%g0, [%0] %1\n\t" : : - "r" (addr), "i" (ASI_M_FLUSH_SEG)); -} - -static inline void cypress_flush_region(unsigned long addr) -{ - __asm__ __volatile__("sta %%g0, [%0] %1\n\t" : : - "r" (addr), "i" (ASI_M_FLUSH_REGION)); -} - -static inline void cypress_flush_context(void) -{ - __asm__ __volatile__("sta %%g0, [%%g0] %0\n\t" : : - "i" (ASI_M_FLUSH_CTX)); -} - -/* XXX Displacement flushes for buggy chips and initial testing - * XXX go here. - */ - -#endif /* !(_SPARC_CYPRESS_H) */ diff --git a/include/asm-sparc/delay.h b/include/asm-sparc/delay.h deleted file mode 100644 index bc9aba2bead6..000000000000 --- a/include/asm-sparc/delay.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * delay.h: Linux delay routines on the Sparc. - * - * Copyright (C) 1994 David S. Miller (davem@caip.rutgers.edu). - */ - -#ifndef __SPARC_DELAY_H -#define __SPARC_DELAY_H - -#include <asm/cpudata.h> - -static inline void __delay(unsigned long loops) -{ - __asm__ __volatile__("cmp %0, 0\n\t" - "1: bne 1b\n\t" - "subcc %0, 1, %0\n" : - "=&r" (loops) : - "0" (loops) : - "cc"); -} - -/* This is too messy with inline asm on the Sparc. */ -extern void __udelay(unsigned long usecs, unsigned long lpj); -extern void __ndelay(unsigned long nsecs, unsigned long lpj); - -#ifdef CONFIG_SMP -#define __udelay_val cpu_data(smp_processor_id()).udelay_val -#else /* SMP */ -#define __udelay_val loops_per_jiffy -#endif /* SMP */ -#define udelay(__usecs) __udelay(__usecs, __udelay_val) -#define ndelay(__nsecs) __ndelay(__nsecs, __udelay_val) - -#endif /* defined(__SPARC_DELAY_H) */ diff --git a/include/asm-sparc/device.h b/include/asm-sparc/device.h deleted file mode 100644 index 19790eb99cc6..000000000000 --- a/include/asm-sparc/device.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * Arch specific extensions to struct device - * - * This file is released under the GPLv2 - */ -#ifndef _ASM_SPARC_DEVICE_H -#define _ASM_SPARC_DEVICE_H - -struct device_node; -struct of_device; - -struct dev_archdata { - void *iommu; - void *stc; - void *host_controller; - - struct device_node *prom_node; - struct of_device *op; - - int numa_node; -}; - -#endif /* _ASM_SPARC_DEVICE_H */ diff --git a/include/asm-sparc/div64.h b/include/asm-sparc/div64.h deleted file mode 100644 index 6cd978cefb28..000000000000 --- a/include/asm-sparc/div64.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/div64.h> diff --git a/include/asm-sparc/dma-mapping.h b/include/asm-sparc/dma-mapping.h deleted file mode 100644 index f3a641e6b2c8..000000000000 --- a/include/asm-sparc/dma-mapping.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef _ASM_SPARC_DMA_MAPPING_H -#define _ASM_SPARC_DMA_MAPPING_H - - -#ifdef CONFIG_PCI -#include <asm-generic/dma-mapping.h> -#else -#include <asm-generic/dma-mapping-broken.h> -#endif /* PCI */ - -#endif /* _ASM_SPARC_DMA_MAPPING_H */ diff --git a/include/asm-sparc/dma.h b/include/asm-sparc/dma.h deleted file mode 100644 index 959d6c8a71ae..000000000000 --- a/include/asm-sparc/dma.h +++ /dev/null @@ -1,288 +0,0 @@ -/* include/asm-sparc/dma.h - * - * Copyright 1995 (C) David S. Miller (davem@davemloft.net) - */ - -#ifndef _ASM_SPARC_DMA_H -#define _ASM_SPARC_DMA_H - -#include <linux/kernel.h> -#include <linux/types.h> - -#include <asm/vac-ops.h> /* for invalidate's, etc. */ -#include <asm/sbus.h> -#include <asm/delay.h> -#include <asm/oplib.h> -#include <asm/system.h> -#include <asm/io.h> -#include <linux/spinlock.h> - -struct page; -extern spinlock_t dma_spin_lock; - -static inline unsigned long claim_dma_lock(void) -{ - unsigned long flags; - spin_lock_irqsave(&dma_spin_lock, flags); - return flags; -} - -static inline void release_dma_lock(unsigned long flags) -{ - spin_unlock_irqrestore(&dma_spin_lock, flags); -} - -/* These are irrelevant for Sparc DMA, but we leave it in so that - * things can compile. - */ -#define MAX_DMA_CHANNELS 8 -#define MAX_DMA_ADDRESS (~0UL) -#define DMA_MODE_READ 1 -#define DMA_MODE_WRITE 2 - -/* Useful constants */ -#define SIZE_16MB (16*1024*1024) -#define SIZE_64K (64*1024) - -/* SBUS DMA controller reg offsets */ -#define DMA_CSR 0x00UL /* rw DMA control/status register 0x00 */ -#define DMA_ADDR 0x04UL /* rw DMA transfer address register 0x04 */ -#define DMA_COUNT 0x08UL /* rw DMA transfer count register 0x08 */ -#define DMA_TEST 0x0cUL /* rw DMA test/debug register 0x0c */ - -/* DVMA chip revisions */ -enum dvma_rev { - dvmarev0, - dvmaesc1, - dvmarev1, - dvmarev2, - dvmarev3, - dvmarevplus, - dvmahme -}; - -#define DMA_HASCOUNT(rev) ((rev)==dvmaesc1) - -/* Linux DMA information structure, filled during probe. */ -struct sbus_dma { - struct sbus_dma *next; - struct sbus_dev *sdev; - void __iomem *regs; - - /* Status, misc info */ - int node; /* Prom node for this DMA device */ - int running; /* Are we doing DMA now? */ - int allocated; /* Are we "owned" by anyone yet? */ - - /* Transfer information. */ - unsigned long addr; /* Start address of current transfer */ - int nbytes; /* Size of current transfer */ - int realbytes; /* For splitting up large transfers, etc. */ - - /* DMA revision */ - enum dvma_rev revision; -}; - -extern struct sbus_dma *dma_chain; - -/* Broken hardware... */ -#ifdef CONFIG_SUN4 -/* Have to sort this out. Does rev0 work fine on sun4[cmd] without isbroken? - * Or is rev0 present only on sun4 boxes? -jj */ -#define DMA_ISBROKEN(dma) ((dma)->revision == dvmarev0 || (dma)->revision == dvmarev1) -#else -#define DMA_ISBROKEN(dma) ((dma)->revision == dvmarev1) -#endif -#define DMA_ISESC1(dma) ((dma)->revision == dvmaesc1) - -/* Main routines in dma.c */ -extern void dvma_init(struct sbus_bus *); - -/* Fields in the cond_reg register */ -/* First, the version identification bits */ -#define DMA_DEVICE_ID 0xf0000000 /* Device identification bits */ -#define DMA_VERS0 0x00000000 /* Sunray DMA version */ -#define DMA_ESCV1 0x40000000 /* DMA ESC Version 1 */ -#define DMA_VERS1 0x80000000 /* DMA rev 1 */ -#define DMA_VERS2 0xa0000000 /* DMA rev 2 */ -#define DMA_VERHME 0xb0000000 /* DMA hme gate array */ -#define DMA_VERSPLUS 0x90000000 /* DMA rev 1 PLUS */ - -#define DMA_HNDL_INTR 0x00000001 /* An IRQ needs to be handled */ -#define DMA_HNDL_ERROR 0x00000002 /* We need to take an error */ -#define DMA_FIFO_ISDRAIN 0x0000000c /* The DMA FIFO is draining */ -#define DMA_INT_ENAB 0x00000010 /* Turn on interrupts */ -#define DMA_FIFO_INV 0x00000020 /* Invalidate the FIFO */ -#define DMA_ACC_SZ_ERR 0x00000040 /* The access size was bad */ -#define DMA_FIFO_STDRAIN 0x00000040 /* DMA_VERS1 Drain the FIFO */ -#define DMA_RST_SCSI 0x00000080 /* Reset the SCSI controller */ -#define DMA_RST_ENET DMA_RST_SCSI /* Reset the ENET controller */ -#define DMA_RST_BPP DMA_RST_SCSI /* Reset the BPP controller */ -#define DMA_ST_WRITE 0x00000100 /* write from device to memory */ -#define DMA_ENABLE 0x00000200 /* Fire up DMA, handle requests */ -#define DMA_PEND_READ 0x00000400 /* DMA_VERS1/0/PLUS Pending Read */ -#define DMA_ESC_BURST 0x00000800 /* 1=16byte 0=32byte */ -#define DMA_READ_AHEAD 0x00001800 /* DMA read ahead partial longword */ -#define DMA_DSBL_RD_DRN 0x00001000 /* No EC drain on slave reads */ -#define DMA_BCNT_ENAB 0x00002000 /* If on, use the byte counter */ -#define DMA_TERM_CNTR 0x00004000 /* Terminal counter */ -#define DMA_SCSI_SBUS64 0x00008000 /* HME: Enable 64-bit SBUS mode. */ -#define DMA_CSR_DISAB 0x00010000 /* No FIFO drains during csr */ -#define DMA_SCSI_DISAB 0x00020000 /* No FIFO drains during reg */ -#define DMA_DSBL_WR_INV 0x00020000 /* No EC inval. on slave writes */ -#define DMA_ADD_ENABLE 0x00040000 /* Special ESC DVMA optimization */ -#define DMA_E_BURSTS 0x000c0000 /* ENET: SBUS r/w burst mask */ -#define DMA_E_BURST32 0x00040000 /* ENET: SBUS 32 byte r/w burst */ -#define DMA_E_BURST16 0x00000000 /* ENET: SBUS 16 byte r/w burst */ -#define DMA_BRST_SZ 0x000c0000 /* SCSI: SBUS r/w burst size */ -#define DMA_BRST64 0x00080000 /* SCSI: 64byte bursts (HME on UltraSparc only) */ -#define DMA_BRST32 0x00040000 /* SCSI/BPP: 32byte bursts */ -#define DMA_BRST16 0x00000000 /* SCSI/BPP: 16byte bursts */ -#define DMA_BRST0 0x00080000 /* SCSI: no bursts (non-HME gate arrays) */ -#define DMA_ADDR_DISAB 0x00100000 /* No FIFO drains during addr */ -#define DMA_2CLKS 0x00200000 /* Each transfer = 2 clock ticks */ -#define DMA_3CLKS 0x00400000 /* Each transfer = 3 clock ticks */ -#define DMA_EN_ENETAUI DMA_3CLKS /* Put lance into AUI-cable mode */ -#define DMA_CNTR_DISAB 0x00800000 /* No IRQ when DMA_TERM_CNTR set */ -#define DMA_AUTO_NADDR 0x01000000 /* Use "auto nxt addr" feature */ -#define DMA_SCSI_ON 0x02000000 /* Enable SCSI dma */ -#define DMA_BPP_ON DMA_SCSI_ON /* Enable BPP dma */ -#define DMA_PARITY_OFF 0x02000000 /* HME: disable parity checking */ -#define DMA_LOADED_ADDR 0x04000000 /* Address has been loaded */ -#define DMA_LOADED_NADDR 0x08000000 /* Next address has been loaded */ -#define DMA_RESET_FAS366 0x08000000 /* HME: Assert RESET to FAS366 */ - -/* Values describing the burst-size property from the PROM */ -#define DMA_BURST1 0x01 -#define DMA_BURST2 0x02 -#define DMA_BURST4 0x04 -#define DMA_BURST8 0x08 -#define DMA_BURST16 0x10 -#define DMA_BURST32 0x20 -#define DMA_BURST64 0x40 -#define DMA_BURSTBITS 0x7f - -/* Determine highest possible final transfer address given a base */ -#define DMA_MAXEND(addr) (0x01000000UL-(((unsigned long)(addr))&0x00ffffffUL)) - -/* Yes, I hack a lot of elisp in my spare time... */ -#define DMA_ERROR_P(regs) ((((regs)->cond_reg) & DMA_HNDL_ERROR)) -#define DMA_IRQ_P(regs) ((((regs)->cond_reg) & (DMA_HNDL_INTR | DMA_HNDL_ERROR))) -#define DMA_WRITE_P(regs) ((((regs)->cond_reg) & DMA_ST_WRITE)) -#define DMA_OFF(regs) ((((regs)->cond_reg) &= (~DMA_ENABLE))) -#define DMA_INTSOFF(regs) ((((regs)->cond_reg) &= (~DMA_INT_ENAB))) -#define DMA_INTSON(regs) ((((regs)->cond_reg) |= (DMA_INT_ENAB))) -#define DMA_PUNTFIFO(regs) ((((regs)->cond_reg) |= DMA_FIFO_INV)) -#define DMA_SETSTART(regs, addr) ((((regs)->st_addr) = (char *) addr)) -#define DMA_BEGINDMA_W(regs) \ - ((((regs)->cond_reg |= (DMA_ST_WRITE|DMA_ENABLE|DMA_INT_ENAB)))) -#define DMA_BEGINDMA_R(regs) \ - ((((regs)->cond_reg |= ((DMA_ENABLE|DMA_INT_ENAB)&(~DMA_ST_WRITE))))) - -/* For certain DMA chips, we need to disable ints upon irq entry - * and turn them back on when we are done. So in any ESP interrupt - * handler you *must* call DMA_IRQ_ENTRY upon entry and DMA_IRQ_EXIT - * when leaving the handler. You have been warned... - */ -#define DMA_IRQ_ENTRY(dma, dregs) do { \ - if(DMA_ISBROKEN(dma)) DMA_INTSOFF(dregs); \ - } while (0) - -#define DMA_IRQ_EXIT(dma, dregs) do { \ - if(DMA_ISBROKEN(dma)) DMA_INTSON(dregs); \ - } while(0) - -#if 0 /* P3 this stuff is inline in ledma.c:init_restart_ledma() */ -/* Pause until counter runs out or BIT isn't set in the DMA condition - * register. - */ -static inline void sparc_dma_pause(struct sparc_dma_registers *regs, - unsigned long bit) -{ - int ctr = 50000; /* Let's find some bugs ;) */ - - /* Busy wait until the bit is not set any more */ - while((regs->cond_reg&bit) && (ctr>0)) { - ctr--; - __delay(5); - } - - /* Check for bogus outcome. */ - if(!ctr) - panic("DMA timeout"); -} - -/* Reset the friggin' thing... */ -#define DMA_RESET(dma) do { \ - struct sparc_dma_registers *regs = dma->regs; \ - /* Let the current FIFO drain itself */ \ - sparc_dma_pause(regs, (DMA_FIFO_ISDRAIN)); \ - /* Reset the logic */ \ - regs->cond_reg |= (DMA_RST_SCSI); /* assert */ \ - __delay(400); /* let the bits set ;) */ \ - regs->cond_reg &= ~(DMA_RST_SCSI); /* de-assert */ \ - sparc_dma_enable_interrupts(regs); /* Re-enable interrupts */ \ - /* Enable FAST transfers if available */ \ - if(dma->revision>dvmarev1) regs->cond_reg |= DMA_3CLKS; \ - dma->running = 0; \ -} while(0) -#endif - -#define for_each_dvma(dma) \ - for((dma) = dma_chain; (dma); (dma) = (dma)->next) - -extern int get_dma_list(char *); -extern int request_dma(unsigned int, __const__ char *); -extern void free_dma(unsigned int); - -/* From PCI */ - -#ifdef CONFIG_PCI -extern int isa_dma_bridge_buggy; -#else -#define isa_dma_bridge_buggy (0) -#endif - -/* Routines for data transfer buffers. */ -BTFIXUPDEF_CALL(char *, mmu_lockarea, char *, unsigned long) -BTFIXUPDEF_CALL(void, mmu_unlockarea, char *, unsigned long) - -#define mmu_lockarea(vaddr,len) BTFIXUP_CALL(mmu_lockarea)(vaddr,len) -#define mmu_unlockarea(vaddr,len) BTFIXUP_CALL(mmu_unlockarea)(vaddr,len) - -/* These are implementations for sbus_map_sg/sbus_unmap_sg... collapse later */ -BTFIXUPDEF_CALL(__u32, mmu_get_scsi_one, char *, unsigned long, struct sbus_bus *sbus) -BTFIXUPDEF_CALL(void, mmu_get_scsi_sgl, struct scatterlist *, int, struct sbus_bus *sbus) -BTFIXUPDEF_CALL(void, mmu_release_scsi_one, __u32, unsigned long, struct sbus_bus *sbus) -BTFIXUPDEF_CALL(void, mmu_release_scsi_sgl, struct scatterlist *, int, struct sbus_bus *sbus) - -#define mmu_get_scsi_one(vaddr,len,sbus) BTFIXUP_CALL(mmu_get_scsi_one)(vaddr,len,sbus) -#define mmu_get_scsi_sgl(sg,sz,sbus) BTFIXUP_CALL(mmu_get_scsi_sgl)(sg,sz,sbus) -#define mmu_release_scsi_one(vaddr,len,sbus) BTFIXUP_CALL(mmu_release_scsi_one)(vaddr,len,sbus) -#define mmu_release_scsi_sgl(sg,sz,sbus) BTFIXUP_CALL(mmu_release_scsi_sgl)(sg,sz,sbus) - -/* - * mmu_map/unmap are provided by iommu/iounit; Invalid to call on IIep. - * - * The mmu_map_dma_area establishes two mappings in one go. - * These mappings point to pages normally mapped at 'va' (linear address). - * First mapping is for CPU visible address at 'a', uncached. - * This is an alias, but it works because it is an uncached mapping. - * Second mapping is for device visible address, or "bus" address. - * The bus address is returned at '*pba'. - * - * These functions seem distinct, but are hard to split. On sun4c, - * at least for now, 'a' is equal to bus address, and retured in *pba. - * On sun4m, page attributes depend on the CPU type, so we have to - * know if we are mapping RAM or I/O, so it has to be an additional argument - * to a separate mapping function for CPU visible mappings. - */ -BTFIXUPDEF_CALL(int, mmu_map_dma_area, dma_addr_t *, unsigned long, unsigned long, int len) -BTFIXUPDEF_CALL(struct page *, mmu_translate_dvma, unsigned long busa) -BTFIXUPDEF_CALL(void, mmu_unmap_dma_area, unsigned long busa, int len) - -#define mmu_map_dma_area(pba,va,a,len) BTFIXUP_CALL(mmu_map_dma_area)(pba,va,a,len) -#define mmu_unmap_dma_area(ba,len) BTFIXUP_CALL(mmu_unmap_dma_area)(ba,len) -#define mmu_translate_dvma(ba) BTFIXUP_CALL(mmu_translate_dvma)(ba) - -#endif /* !(_ASM_SPARC_DMA_H) */ diff --git a/include/asm-sparc/ebus.h b/include/asm-sparc/ebus.h deleted file mode 100644 index 491f85d662df..000000000000 --- a/include/asm-sparc/ebus.h +++ /dev/null @@ -1,99 +0,0 @@ -/* - * ebus.h: PCI to Ebus pseudo driver software state. - * - * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be) - * - * Adopted for sparc by V. Roganov and G. Raiko. - */ - -#ifndef __SPARC_EBUS_H -#define __SPARC_EBUS_H - -#ifndef _LINUX_IOPORT_H -#include <linux/ioport.h> -#endif -#include <asm/oplib.h> -#include <asm/prom.h> -#include <asm/of_device.h> - -struct linux_ebus_child { - struct linux_ebus_child *next; - struct linux_ebus_device *parent; - struct linux_ebus *bus; - struct device_node *prom_node; - struct resource resource[PROMREG_MAX]; - int num_addrs; - unsigned int irqs[PROMINTR_MAX]; - int num_irqs; -}; - -struct linux_ebus_device { - struct of_device ofdev; - struct linux_ebus_device *next; - struct linux_ebus_child *children; - struct linux_ebus *bus; - struct device_node *prom_node; - struct resource resource[PROMREG_MAX]; - int num_addrs; - unsigned int irqs[PROMINTR_MAX]; - int num_irqs; -}; -#define to_ebus_device(d) container_of(d, struct linux_ebus_device, ofdev.dev) - -struct linux_ebus { - struct of_device ofdev; - struct linux_ebus *next; - struct linux_ebus_device *devices; - struct linux_pbm_info *parent; - struct pci_dev *self; - struct device_node *prom_node; -}; -#define to_ebus(d) container_of(d, struct linux_ebus, ofdev.dev) - -struct linux_ebus_dma { - unsigned int dcsr; - unsigned int dacr; - unsigned int dbcr; -}; - -#define EBUS_DCSR_INT_PEND 0x00000001 -#define EBUS_DCSR_ERR_PEND 0x00000002 -#define EBUS_DCSR_DRAIN 0x00000004 -#define EBUS_DCSR_INT_EN 0x00000010 -#define EBUS_DCSR_RESET 0x00000080 -#define EBUS_DCSR_WRITE 0x00000100 -#define EBUS_DCSR_EN_DMA 0x00000200 -#define EBUS_DCSR_CYC_PEND 0x00000400 -#define EBUS_DCSR_DIAG_RD_DONE 0x00000800 -#define EBUS_DCSR_DIAG_WR_DONE 0x00001000 -#define EBUS_DCSR_EN_CNT 0x00002000 -#define EBUS_DCSR_TC 0x00004000 -#define EBUS_DCSR_DIS_CSR_DRN 0x00010000 -#define EBUS_DCSR_BURST_SZ_MASK 0x000c0000 -#define EBUS_DCSR_BURST_SZ_1 0x00080000 -#define EBUS_DCSR_BURST_SZ_4 0x00000000 -#define EBUS_DCSR_BURST_SZ_8 0x00040000 -#define EBUS_DCSR_BURST_SZ_16 0x000c0000 -#define EBUS_DCSR_DIAG_EN 0x00100000 -#define EBUS_DCSR_DIS_ERR_PEND 0x00400000 -#define EBUS_DCSR_TCI_DIS 0x00800000 -#define EBUS_DCSR_EN_NEXT 0x01000000 -#define EBUS_DCSR_DMA_ON 0x02000000 -#define EBUS_DCSR_A_LOADED 0x04000000 -#define EBUS_DCSR_NA_LOADED 0x08000000 -#define EBUS_DCSR_DEV_ID_MASK 0xf0000000 - -extern struct linux_ebus *ebus_chain; - -extern void ebus_init(void); - -#define for_each_ebus(bus) \ - for((bus) = ebus_chain; (bus); (bus) = (bus)->next) - -#define for_each_ebusdev(dev, bus) \ - for((dev) = (bus)->devices; (dev); (dev) = (dev)->next) - -#define for_each_edevchild(dev, child) \ - for((child) = (dev)->children; (child); (child) = (child)->next) - -#endif /* !(__SPARC_EBUS_H) */ diff --git a/include/asm-sparc/ecc.h b/include/asm-sparc/ecc.h deleted file mode 100644 index ccb84b66fef1..000000000000 --- a/include/asm-sparc/ecc.h +++ /dev/null @@ -1,122 +0,0 @@ -/* - * ecc.h: Definitions and defines for the external cache/memory - * controller on the sun4m. - * - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - */ - -#ifndef _SPARC_ECC_H -#define _SPARC_ECC_H - -/* These registers are accessed through the SRMMU passthrough ASI 0x20 */ -#define ECC_ENABLE 0x00000000 /* ECC enable register */ -#define ECC_FSTATUS 0x00000008 /* ECC fault status register */ -#define ECC_FADDR 0x00000010 /* ECC fault address register */ -#define ECC_DIGNOSTIC 0x00000018 /* ECC diagnostics register */ -#define ECC_MBAENAB 0x00000020 /* MBus arbiter enable register */ -#define ECC_DMESG 0x00001000 /* Diagnostic message passing area */ - -/* ECC MBus Arbiter Enable register: - * - * ---------------------------------------- - * | |SBUS|MOD3|MOD2|MOD1|RSV| - * ---------------------------------------- - * 31 5 4 3 2 1 0 - * - * SBUS: Enable MBus Arbiter on the SBus 0=off 1=on - * MOD3: Enable MBus Arbiter on MBus module 3 0=off 1=on - * MOD2: Enable MBus Arbiter on MBus module 2 0=off 1=on - * MOD1: Enable MBus Arbiter on MBus module 1 0=off 1=on - */ - -#define ECC_MBAE_SBUS 0x00000010 -#define ECC_MBAE_MOD3 0x00000008 -#define ECC_MBAE_MOD2 0x00000004 -#define ECC_MBAE_MOD1 0x00000002 - -/* ECC Fault Control Register layout: - * - * ----------------------------- - * | RESV | ECHECK | EINT | - * ----------------------------- - * 31 2 1 0 - * - * ECHECK: Enable ECC checking. 0=off 1=on - * EINT: Enable Interrupts for correctable errors. 0=off 1=on - */ -#define ECC_FCR_CHECK 0x00000002 -#define ECC_FCR_INTENAB 0x00000001 - -/* ECC Fault Address Register Zero layout: - * - * ----------------------------------------------------- - * | MID | S | RSV | VA | BM |AT| C| SZ |TYP| PADDR | - * ----------------------------------------------------- - * 31-28 27 26-22 21-14 13 12 11 10-8 7-4 3-0 - * - * MID: ModuleID of the faulting processor. ie. who did it? - * S: Supervisor/Privileged access? 0=no 1=yes - * VA: Bits 19-12 of the virtual faulting address, these are the - * superset bits in the virtual cache and can be used for - * a flush operation if necessary. - * BM: Boot mode? 0=no 1=yes This is just like the SRMMU boot - * mode bit. - * AT: Did this fault happen during an atomic instruction? 0=no - * 1=yes. This means either an 'ldstub' or 'swap' instruction - * was in progress (but not finished) when this fault happened. - * This indicated whether the bus was locked when the fault - * occurred. - * C: Did the pte for this access indicate that it was cacheable? - * 0=no 1=yes - * SZ: The size of the transaction. - * TYP: The transaction type. - * PADDR: Bits 35-32 of the physical address for the fault. - */ -#define ECC_FADDR0_MIDMASK 0xf0000000 -#define ECC_FADDR0_S 0x08000000 -#define ECC_FADDR0_VADDR 0x003fc000 -#define ECC_FADDR0_BMODE 0x00002000 -#define ECC_FADDR0_ATOMIC 0x00001000 -#define ECC_FADDR0_CACHE 0x00000800 -#define ECC_FADDR0_SIZE 0x00000700 -#define ECC_FADDR0_TYPE 0x000000f0 -#define ECC_FADDR0_PADDR 0x0000000f - -/* ECC Fault Address Register One layout: - * - * ------------------------------------- - * | Physical Address 31-0 | - * ------------------------------------- - * 31 0 - * - * You get the upper 4 bits of the physical address from the - * PADDR field in ECC Fault Address Zero register. - */ - -/* ECC Fault Status Register layout: - * - * ---------------------------------------------- - * | RESV|C2E|MULT|SYNDROME|DWORD|UNC|TIMEO|BS|C| - * ---------------------------------------------- - * 31-18 17 16 15-8 7-4 3 2 1 0 - * - * C2E: A C2 graphics error occurred. 0=no 1=yes (SS10 only) - * MULT: Multiple errors occurred ;-O 0=no 1=prom_panic(yes) - * SYNDROME: Controller is mentally unstable. - * DWORD: - * UNC: Uncorrectable error. 0=no 1=yes - * TIMEO: Timeout occurred. 0=no 1=yes - * BS: C2 graphics bad slot access. 0=no 1=yes (SS10 only) - * C: Correctable error? 0=no 1=yes - */ - -#define ECC_FSR_C2ERR 0x00020000 -#define ECC_FSR_MULT 0x00010000 -#define ECC_FSR_SYND 0x0000ff00 -#define ECC_FSR_DWORD 0x000000f0 -#define ECC_FSR_UNC 0x00000008 -#define ECC_FSR_TIMEO 0x00000004 -#define ECC_FSR_BADSLOT 0x00000002 -#define ECC_FSR_C 0x00000001 - -#endif /* !(_SPARC_ECC_H) */ diff --git a/include/asm-sparc/eeprom.h b/include/asm-sparc/eeprom.h deleted file mode 100644 index e17beeceb405..000000000000 --- a/include/asm-sparc/eeprom.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * eeprom.h: Definitions for the Sun eeprom. - * - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - */ - -/* The EEPROM and the Mostek Mk48t02 use the same IO address space - * for their registers/data areas. The IDPROM lives here too. - */ diff --git a/include/asm-sparc/elf.h b/include/asm-sparc/elf.h deleted file mode 100644 index d043f80bc2fd..000000000000 --- a/include/asm-sparc/elf.h +++ /dev/null @@ -1,145 +0,0 @@ -#ifndef __ASMSPARC_ELF_H -#define __ASMSPARC_ELF_H - -/* - * ELF register definitions.. - */ - -#include <asm/ptrace.h> - -/* - * Sparc section types - */ -#define STT_REGISTER 13 - -/* - * Sparc ELF relocation types - */ -#define R_SPARC_NONE 0 -#define R_SPARC_8 1 -#define R_SPARC_16 2 -#define R_SPARC_32 3 -#define R_SPARC_DISP8 4 -#define R_SPARC_DISP16 5 -#define R_SPARC_DISP32 6 -#define R_SPARC_WDISP30 7 -#define R_SPARC_WDISP22 8 -#define R_SPARC_HI22 9 -#define R_SPARC_22 10 -#define R_SPARC_13 11 -#define R_SPARC_LO10 12 -#define R_SPARC_GOT10 13 -#define R_SPARC_GOT13 14 -#define R_SPARC_GOT22 15 -#define R_SPARC_PC10 16 -#define R_SPARC_PC22 17 -#define R_SPARC_WPLT30 18 -#define R_SPARC_COPY 19 -#define R_SPARC_GLOB_DAT 20 -#define R_SPARC_JMP_SLOT 21 -#define R_SPARC_RELATIVE 22 -#define R_SPARC_UA32 23 -#define R_SPARC_PLT32 24 -#define R_SPARC_HIPLT22 25 -#define R_SPARC_LOPLT10 26 -#define R_SPARC_PCPLT32 27 -#define R_SPARC_PCPLT22 28 -#define R_SPARC_PCPLT10 29 -#define R_SPARC_10 30 -#define R_SPARC_11 31 -#define R_SPARC_64 32 -#define R_SPARC_OLO10 33 -#define R_SPARC_WDISP16 40 -#define R_SPARC_WDISP19 41 -#define R_SPARC_7 43 -#define R_SPARC_5 44 -#define R_SPARC_6 45 - -/* Bits present in AT_HWCAP, primarily for Sparc32. */ - -#define HWCAP_SPARC_FLUSH 1 /* CPU supports flush instruction. */ -#define HWCAP_SPARC_STBAR 2 -#define HWCAP_SPARC_SWAP 4 -#define HWCAP_SPARC_MULDIV 8 -#define HWCAP_SPARC_V9 16 -#define HWCAP_SPARC_ULTRA3 32 - -#define CORE_DUMP_USE_REGSET - -/* Format is: - * G0 --> G7 - * O0 --> O7 - * L0 --> L7 - * I0 --> I7 - * PSR, PC, nPC, Y, WIM, TBR - */ -typedef unsigned long elf_greg_t; -#define ELF_NGREG 38 -typedef elf_greg_t elf_gregset_t[ELF_NGREG]; - -typedef struct { - union { - unsigned long pr_regs[32]; - double pr_dregs[16]; - } pr_fr; - unsigned long __unused; - unsigned long pr_fsr; - unsigned char pr_qcnt; - unsigned char pr_q_entrysize; - unsigned char pr_en; - unsigned int pr_q[64]; -} elf_fpregset_t; - -#include <asm/mbus.h> - -/* - * This is used to ensure we don't load something for the wrong architecture. - */ -#define elf_check_arch(x) ((x)->e_machine == EM_SPARC) - -/* - * These are used to set parameters in the core dumps. - */ -#define ELF_ARCH EM_SPARC -#define ELF_CLASS ELFCLASS32 -#define ELF_DATA ELFDATA2MSB - -#define USE_ELF_CORE_DUMP -#ifndef CONFIG_SUN4 -#define ELF_EXEC_PAGESIZE 4096 -#else -#define ELF_EXEC_PAGESIZE 8192 -#endif - - -/* This is the location that an ET_DYN program is loaded if exec'ed. Typical - use of this is to invoke "./ld.so someprog" to test out a new version of - the loader. We need to make sure that it is out of the way of the program - that it will "exec", and that there is sufficient room for the brk. */ - -#define ELF_ET_DYN_BASE (TASK_UNMAPPED_BASE) - -/* This yields a mask that user programs can use to figure out what - instruction set this cpu supports. This can NOT be done in userspace - on Sparc. */ - -/* Sun4c has none of the capabilities, most sun4m's have them all. - * XXX This is gross, set some global variable at boot time. -DaveM - */ -#define ELF_HWCAP ((ARCH_SUN4C_SUN4) ? 0 : \ - (HWCAP_SPARC_FLUSH | HWCAP_SPARC_STBAR | \ - HWCAP_SPARC_SWAP | \ - ((srmmu_modtype != Cypress && \ - srmmu_modtype != Cypress_vE && \ - srmmu_modtype != Cypress_vD) ? \ - HWCAP_SPARC_MULDIV : 0))) - -/* This yields a string that ld.so will use to load implementation - specific libraries for optimization. This is more specific in - intent than poking at uname or /proc/cpuinfo. */ - -#define ELF_PLATFORM (NULL) - -#define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX) - -#endif /* !(__ASMSPARC_ELF_H) */ diff --git a/include/asm-sparc/emergency-restart.h b/include/asm-sparc/emergency-restart.h deleted file mode 100644 index 108d8c48e42e..000000000000 --- a/include/asm-sparc/emergency-restart.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_EMERGENCY_RESTART_H -#define _ASM_EMERGENCY_RESTART_H - -#include <asm-generic/emergency-restart.h> - -#endif /* _ASM_EMERGENCY_RESTART_H */ diff --git a/include/asm-sparc/errno.h b/include/asm-sparc/errno.h deleted file mode 100644 index a9ef172977de..000000000000 --- a/include/asm-sparc/errno.h +++ /dev/null @@ -1,113 +0,0 @@ -#ifndef _SPARC_ERRNO_H -#define _SPARC_ERRNO_H - -/* These match the SunOS error numbering scheme. */ - -#include <asm-generic/errno-base.h> - -#define EWOULDBLOCK EAGAIN /* Operation would block */ -#define EINPROGRESS 36 /* Operation now in progress */ -#define EALREADY 37 /* Operation already in progress */ -#define ENOTSOCK 38 /* Socket operation on non-socket */ -#define EDESTADDRREQ 39 /* Destination address required */ -#define EMSGSIZE 40 /* Message too long */ -#define EPROTOTYPE 41 /* Protocol wrong type for socket */ -#define ENOPROTOOPT 42 /* Protocol not available */ -#define EPROTONOSUPPORT 43 /* Protocol not supported */ -#define ESOCKTNOSUPPORT 44 /* Socket type not supported */ -#define EOPNOTSUPP 45 /* Op not supported on transport endpoint */ -#define EPFNOSUPPORT 46 /* Protocol family not supported */ -#define EAFNOSUPPORT 47 /* Address family not supported by protocol */ -#define EADDRINUSE 48 /* Address already in use */ -#define EADDRNOTAVAIL 49 /* Cannot assign requested address */ -#define ENETDOWN 50 /* Network is down */ -#define ENETUNREACH 51 /* Network is unreachable */ -#define ENETRESET 52 /* Net dropped connection because of reset */ -#define ECONNABORTED 53 /* Software caused connection abort */ -#define ECONNRESET 54 /* Connection reset by peer */ -#define ENOBUFS 55 /* No buffer space available */ -#define EISCONN 56 /* Transport endpoint is already connected */ -#define ENOTCONN 57 /* Transport endpoint is not connected */ -#define ESHUTDOWN 58 /* No send after transport endpoint shutdown */ -#define ETOOMANYREFS 59 /* Too many references: cannot splice */ -#define ETIMEDOUT 60 /* Connection timed out */ -#define ECONNREFUSED 61 /* Connection refused */ -#define ELOOP 62 /* Too many symbolic links encountered */ -#define ENAMETOOLONG 63 /* File name too long */ -#define EHOSTDOWN 64 /* Host is down */ -#define EHOSTUNREACH 65 /* No route to host */ -#define ENOTEMPTY 66 /* Directory not empty */ -#define EPROCLIM 67 /* SUNOS: Too many processes */ -#define EUSERS 68 /* Too many users */ -#define EDQUOT 69 /* Quota exceeded */ -#define ESTALE 70 /* Stale NFS file handle */ -#define EREMOTE 71 /* Object is remote */ -#define ENOSTR 72 /* Device not a stream */ -#define ETIME 73 /* Timer expired */ -#define ENOSR 74 /* Out of streams resources */ -#define ENOMSG 75 /* No message of desired type */ -#define EBADMSG 76 /* Not a data message */ -#define EIDRM 77 /* Identifier removed */ -#define EDEADLK 78 /* Resource deadlock would occur */ -#define ENOLCK 79 /* No record locks available */ -#define ENONET 80 /* Machine is not on the network */ -#define ERREMOTE 81 /* SunOS: Too many lvls of remote in path */ -#define ENOLINK 82 /* Link has been severed */ -#define EADV 83 /* Advertise error */ -#define ESRMNT 84 /* Srmount error */ -#define ECOMM 85 /* Communication error on send */ -#define EPROTO 86 /* Protocol error */ -#define EMULTIHOP 87 /* Multihop attempted */ -#define EDOTDOT 88 /* RFS specific error */ -#define EREMCHG 89 /* Remote address changed */ -#define ENOSYS 90 /* Function not implemented */ - -/* The rest have no SunOS equivalent. */ -#define ESTRPIPE 91 /* Streams pipe error */ -#define EOVERFLOW 92 /* Value too large for defined data type */ -#define EBADFD 93 /* File descriptor in bad state */ -#define ECHRNG 94 /* Channel number out of range */ -#define EL2NSYNC 95 /* Level 2 not synchronized */ -#define EL3HLT 96 /* Level 3 halted */ -#define EL3RST 97 /* Level 3 reset */ -#define ELNRNG 98 /* Link number out of range */ -#define EUNATCH 99 /* Protocol driver not attached */ -#define ENOCSI 100 /* No CSI structure available */ -#define EL2HLT 101 /* Level 2 halted */ -#define EBADE 102 /* Invalid exchange */ -#define EBADR 103 /* Invalid request descriptor */ -#define EXFULL 104 /* Exchange full */ -#define ENOANO 105 /* No anode */ -#define EBADRQC 106 /* Invalid request code */ -#define EBADSLT 107 /* Invalid slot */ -#define EDEADLOCK 108 /* File locking deadlock error */ -#define EBFONT 109 /* Bad font file format */ -#define ELIBEXEC 110 /* Cannot exec a shared library directly */ -#define ENODATA 111 /* No data available */ -#define ELIBBAD 112 /* Accessing a corrupted shared library */ -#define ENOPKG 113 /* Package not installed */ -#define ELIBACC 114 /* Can not access a needed shared library */ -#define ENOTUNIQ 115 /* Name not unique on network */ -#define ERESTART 116 /* Interrupted syscall should be restarted */ -#define EUCLEAN 117 /* Structure needs cleaning */ -#define ENOTNAM 118 /* Not a XENIX named type file */ -#define ENAVAIL 119 /* No XENIX semaphores available */ -#define EISNAM 120 /* Is a named type file */ -#define EREMOTEIO 121 /* Remote I/O error */ -#define EILSEQ 122 /* Illegal byte sequence */ -#define ELIBMAX 123 /* Atmpt to link in too many shared libs */ -#define ELIBSCN 124 /* .lib section in a.out corrupted */ - -#define ENOMEDIUM 125 /* No medium found */ -#define EMEDIUMTYPE 126 /* Wrong medium type */ -#define ECANCELED 127 /* Operation Cancelled */ -#define ENOKEY 128 /* Required key not available */ -#define EKEYEXPIRED 129 /* Key has expired */ -#define EKEYREVOKED 130 /* Key has been revoked */ -#define EKEYREJECTED 131 /* Key was rejected by service */ - -/* for robust mutexes */ -#define EOWNERDEAD 132 /* Owner died */ -#define ENOTRECOVERABLE 133 /* State not recoverable */ - -#endif diff --git a/include/asm-sparc/fb.h b/include/asm-sparc/fb.h deleted file mode 100644 index b83e44729655..000000000000 --- a/include/asm-sparc/fb.h +++ /dev/null @@ -1,29 +0,0 @@ -#ifndef _SPARC_FB_H_ -#define _SPARC_FB_H_ -#include <linux/fb.h> -#include <linux/fs.h> -#include <asm/page.h> -#include <asm/prom.h> - -static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma, - unsigned long off) -{ -#ifdef CONFIG_SPARC64 - vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); -#endif -} - -static inline int fb_is_primary_device(struct fb_info *info) -{ - struct device *dev = info->device; - struct device_node *node; - - node = dev->archdata.prom_node; - if (node && - node == of_console_device) - return 1; - - return 0; -} - -#endif /* _SPARC_FB_H_ */ diff --git a/include/asm-sparc/fbio.h b/include/asm-sparc/fbio.h deleted file mode 100644 index c2b27e7a7cad..000000000000 --- a/include/asm-sparc/fbio.h +++ /dev/null @@ -1,297 +0,0 @@ -#ifndef __LINUX_FBIO_H -#define __LINUX_FBIO_H - -/* Constants used for fbio SunOS compatibility */ -/* (C) 1996 Miguel de Icaza */ - -/* Frame buffer types */ -#define FBTYPE_NOTYPE -1 -#define FBTYPE_SUN1BW 0 /* mono */ -#define FBTYPE_SUN1COLOR 1 -#define FBTYPE_SUN2BW 2 -#define FBTYPE_SUN2COLOR 3 -#define FBTYPE_SUN2GP 4 -#define FBTYPE_SUN5COLOR 5 -#define FBTYPE_SUN3COLOR 6 -#define FBTYPE_MEMCOLOR 7 -#define FBTYPE_SUN4COLOR 8 - -#define FBTYPE_NOTSUN1 9 -#define FBTYPE_NOTSUN2 10 -#define FBTYPE_NOTSUN3 11 - -#define FBTYPE_SUNFAST_COLOR 12 /* cg6 */ -#define FBTYPE_SUNROP_COLOR 13 -#define FBTYPE_SUNFB_VIDEO 14 -#define FBTYPE_SUNGIFB 15 -#define FBTYPE_SUNGPLAS 16 -#define FBTYPE_SUNGP3 17 -#define FBTYPE_SUNGT 18 -#define FBTYPE_SUNLEO 19 /* zx Leo card */ -#define FBTYPE_MDICOLOR 20 /* cg14 */ -#define FBTYPE_TCXCOLOR 21 /* SUNW,tcx card */ - -#define FBTYPE_LASTPLUSONE 21 /* This is not last + 1 in fact... */ - -/* Does not seem to be listed in the Sun file either */ -#define FBTYPE_CREATOR 22 -#define FBTYPE_PCI_IGA1682 23 -#define FBTYPE_P9100COLOR 24 - -/* fbio ioctls */ -/* Returned by FBIOGTYPE */ -struct fbtype { - int fb_type; /* fb type, see above */ - int fb_height; /* pixels */ - int fb_width; /* pixels */ - int fb_depth; - int fb_cmsize; /* color map entries */ - int fb_size; /* fb size in bytes */ -}; -#define FBIOGTYPE _IOR('F', 0, struct fbtype) - -struct fbcmap { - int index; /* first element (0 origin) */ - int count; - unsigned char __user *red; - unsigned char __user *green; - unsigned char __user *blue; -}; - -#ifdef __KERNEL__ -#define FBIOPUTCMAP_SPARC _IOW('F', 3, struct fbcmap) -#define FBIOGETCMAP_SPARC _IOW('F', 4, struct fbcmap) -#else -#define FBIOPUTCMAP _IOW('F', 3, struct fbcmap) -#define FBIOGETCMAP _IOW('F', 4, struct fbcmap) -#endif - -/* # of device specific values */ -#define FB_ATTR_NDEVSPECIFIC 8 -/* # of possible emulations */ -#define FB_ATTR_NEMUTYPES 4 - -struct fbsattr { - int flags; - int emu_type; /* -1 if none */ - int dev_specific[FB_ATTR_NDEVSPECIFIC]; -}; - -struct fbgattr { - int real_type; /* real frame buffer type */ - int owner; /* unknown */ - struct fbtype fbtype; /* real frame buffer fbtype */ - struct fbsattr sattr; - int emu_types[FB_ATTR_NEMUTYPES]; /* supported emulations */ -}; -#define FBIOSATTR _IOW('F', 5, struct fbgattr) /* Unsupported: */ -#define FBIOGATTR _IOR('F', 6, struct fbgattr) /* supported */ - -#define FBIOSVIDEO _IOW('F', 7, int) -#define FBIOGVIDEO _IOR('F', 8, int) - -struct fbcursor { - short set; /* what to set, choose from the list above */ - short enable; /* cursor on/off */ - struct fbcurpos pos; /* cursor position */ - struct fbcurpos hot; /* cursor hot spot */ - struct fbcmap cmap; /* color map info */ - struct fbcurpos size; /* cursor bit map size */ - char *image; /* cursor image bits */ - char *mask; /* cursor mask bits */ -}; - -/* set/get cursor attributes/shape */ -#define FBIOSCURSOR _IOW('F', 24, struct fbcursor) -#define FBIOGCURSOR _IOWR('F', 25, struct fbcursor) - -/* set/get cursor position */ -#define FBIOSCURPOS _IOW('F', 26, struct fbcurpos) -#define FBIOGCURPOS _IOW('F', 27, struct fbcurpos) - -/* get max cursor size */ -#define FBIOGCURMAX _IOR('F', 28, struct fbcurpos) - -/* wid manipulation */ -struct fb_wid_alloc { -#define FB_WID_SHARED_8 0 -#define FB_WID_SHARED_24 1 -#define FB_WID_DBL_8 2 -#define FB_WID_DBL_24 3 - __u32 wa_type; - __s32 wa_index; /* Set on return */ - __u32 wa_count; -}; -struct fb_wid_item { - __u32 wi_type; - __s32 wi_index; - __u32 wi_attrs; - __u32 wi_values[32]; -}; -struct fb_wid_list { - __u32 wl_flags; - __u32 wl_count; - struct fb_wid_item *wl_list; -}; - -#define FBIO_WID_ALLOC _IOWR('F', 30, struct fb_wid_alloc) -#define FBIO_WID_FREE _IOW('F', 31, struct fb_wid_alloc) -#define FBIO_WID_PUT _IOW('F', 32, struct fb_wid_list) -#define FBIO_WID_GET _IOWR('F', 33, struct fb_wid_list) - -/* Creator ioctls */ -#define FFB_IOCTL ('F'<<8) -#define FFB_SYS_INFO (FFB_IOCTL|80) -#define FFB_CLUTREAD (FFB_IOCTL|81) -#define FFB_CLUTPOST (FFB_IOCTL|82) -#define FFB_SETDIAGMODE (FFB_IOCTL|83) -#define FFB_GETMONITORID (FFB_IOCTL|84) -#define FFB_GETVIDEOMODE (FFB_IOCTL|85) -#define FFB_SETVIDEOMODE (FFB_IOCTL|86) -#define FFB_SETSERVER (FFB_IOCTL|87) -#define FFB_SETOVCTL (FFB_IOCTL|88) -#define FFB_GETOVCTL (FFB_IOCTL|89) -#define FFB_GETSAXNUM (FFB_IOCTL|90) -#define FFB_FBDEBUG (FFB_IOCTL|91) - -/* Cg14 ioctls */ -#define MDI_IOCTL ('M'<<8) -#define MDI_RESET (MDI_IOCTL|1) -#define MDI_GET_CFGINFO (MDI_IOCTL|2) -#define MDI_SET_PIXELMODE (MDI_IOCTL|3) -# define MDI_32_PIX 32 -# define MDI_16_PIX 16 -# define MDI_8_PIX 8 - -struct mdi_cfginfo { - int mdi_ncluts; /* Number of implemented CLUTs in this MDI */ - int mdi_type; /* FBTYPE name */ - int mdi_height; /* height */ - int mdi_width; /* widht */ - int mdi_size; /* available ram */ - int mdi_mode; /* 8bpp, 16bpp or 32bpp */ - int mdi_pixfreq; /* pixel clock (from PROM) */ -}; - -/* SparcLinux specific ioctl for the MDI, should be replaced for - * the SET_XLUT/SET_CLUTn ioctls instead - */ -#define MDI_CLEAR_XLUT (MDI_IOCTL|9) - -/* leo & ffb ioctls */ -struct fb_clut_alloc { - __u32 clutid; /* Set on return */ - __u32 flag; - __u32 index; -}; - -struct fb_clut { -#define FB_CLUT_WAIT 0x00000001 /* Not yet implemented */ - __u32 flag; - __u32 clutid; - __u32 offset; - __u32 count; - char * red; - char * green; - char * blue; -}; - -struct fb_clut32 { - __u32 flag; - __u32 clutid; - __u32 offset; - __u32 count; - __u32 red; - __u32 green; - __u32 blue; -}; - -#define LEO_CLUTALLOC _IOWR('L', 53, struct fb_clut_alloc) -#define LEO_CLUTFREE _IOW('L', 54, struct fb_clut_alloc) -#define LEO_CLUTREAD _IOW('L', 55, struct fb_clut) -#define LEO_CLUTPOST _IOW('L', 56, struct fb_clut) -#define LEO_SETGAMMA _IOW('L', 68, int) /* Not yet implemented */ -#define LEO_GETGAMMA _IOR('L', 69, int) /* Not yet implemented */ - -#ifdef __KERNEL__ -/* Addresses on the fd of a cgsix that are mappable */ -#define CG6_FBC 0x70000000 -#define CG6_TEC 0x70001000 -#define CG6_BTREGS 0x70002000 -#define CG6_FHC 0x70004000 -#define CG6_THC 0x70005000 -#define CG6_ROM 0x70006000 -#define CG6_RAM 0x70016000 -#define CG6_DHC 0x80000000 - -#define CG3_MMAP_OFFSET 0x4000000 - -/* Addresses on the fd of a tcx that are mappable */ -#define TCX_RAM8BIT 0x00000000 -#define TCX_RAM24BIT 0x01000000 -#define TCX_UNK3 0x10000000 -#define TCX_UNK4 0x20000000 -#define TCX_CONTROLPLANE 0x28000000 -#define TCX_UNK6 0x30000000 -#define TCX_UNK7 0x38000000 -#define TCX_TEC 0x70000000 -#define TCX_BTREGS 0x70002000 -#define TCX_THC 0x70004000 -#define TCX_DHC 0x70008000 -#define TCX_ALT 0x7000a000 -#define TCX_SYNC 0x7000e000 -#define TCX_UNK2 0x70010000 - -/* CG14 definitions */ - -/* Offsets into the OBIO space: */ -#define CG14_REGS 0 /* registers */ -#define CG14_CURSORREGS 0x1000 /* cursor registers */ -#define CG14_DACREGS 0x2000 /* DAC registers */ -#define CG14_XLUT 0x3000 /* X Look Up Table -- ??? */ -#define CG14_CLUT1 0x4000 /* Color Look Up Table */ -#define CG14_CLUT2 0x5000 /* Color Look Up Table */ -#define CG14_CLUT3 0x6000 /* Color Look Up Table */ -#define CG14_AUTO 0xf000 - -#endif /* KERNEL */ - -/* These are exported to userland for applications to use */ -/* Mappable offsets for the cg14: control registers */ -#define MDI_DIRECT_MAP 0x10000000 -#define MDI_CTLREG_MAP 0x20000000 -#define MDI_CURSOR_MAP 0x30000000 -#define MDI_SHDW_VRT_MAP 0x40000000 - -/* Mappable offsets for the cg14: frame buffer resolutions */ -/* 32 bits */ -#define MDI_CHUNKY_XBGR_MAP 0x50000000 -#define MDI_CHUNKY_BGR_MAP 0x60000000 - -/* 16 bits */ -#define MDI_PLANAR_X16_MAP 0x70000000 -#define MDI_PLANAR_C16_MAP 0x80000000 - -/* 8 bit is done as CG3 MMAP offset */ -/* 32 bits, planar */ -#define MDI_PLANAR_X32_MAP 0x90000000 -#define MDI_PLANAR_B32_MAP 0xa0000000 -#define MDI_PLANAR_G32_MAP 0xb0000000 -#define MDI_PLANAR_R32_MAP 0xc0000000 - -/* Mappable offsets on leo */ -#define LEO_SS0_MAP 0x00000000 -#define LEO_LC_SS0_USR_MAP 0x00800000 -#define LEO_LD_SS0_MAP 0x00801000 -#define LEO_LX_CURSOR_MAP 0x00802000 -#define LEO_SS1_MAP 0x00803000 -#define LEO_LC_SS1_USR_MAP 0x01003000 -#define LEO_LD_SS1_MAP 0x01004000 -#define LEO_UNK_MAP 0x01005000 -#define LEO_LX_KRN_MAP 0x01006000 -#define LEO_LC_SS0_KRN_MAP 0x01007000 -#define LEO_LC_SS1_KRN_MAP 0x01008000 -#define LEO_LD_GBL_MAP 0x01009000 -#define LEO_UNK2_MAP 0x0100a000 - -#endif /* __LINUX_FBIO_H */ diff --git a/include/asm-sparc/fcntl.h b/include/asm-sparc/fcntl.h deleted file mode 100644 index 07bd2d80257f..000000000000 --- a/include/asm-sparc/fcntl.h +++ /dev/null @@ -1,36 +0,0 @@ -#ifndef _SPARC_FCNTL_H -#define _SPARC_FCNTL_H - -/* open/fcntl - O_SYNC is only implemented on blocks devices and on files - located on an ext2 file system */ -#define O_APPEND 0x0008 -#define FASYNC 0x0040 /* fcntl, for BSD compatibility */ -#define O_CREAT 0x0200 /* not fcntl */ -#define O_TRUNC 0x0400 /* not fcntl */ -#define O_EXCL 0x0800 /* not fcntl */ -#define O_SYNC 0x2000 -#define O_NONBLOCK 0x4000 -#define O_NDELAY (0x0004 | O_NONBLOCK) -#define O_NOCTTY 0x8000 /* not fcntl */ -#define O_LARGEFILE 0x40000 -#define O_DIRECT 0x100000 /* direct disk access hint */ -#define O_NOATIME 0x200000 -#define O_CLOEXEC 0x400000 - -#define F_GETOWN 5 /* for sockets. */ -#define F_SETOWN 6 /* for sockets. */ -#define F_GETLK 7 -#define F_SETLK 8 -#define F_SETLKW 9 - -/* for posix fcntl() and lockf() */ -#define F_RDLCK 1 -#define F_WRLCK 2 -#define F_UNLCK 3 - -#define __ARCH_FLOCK_PAD short __unused; -#define __ARCH_FLOCK64_PAD short __unused; - -#include <asm-generic/fcntl.h> - -#endif diff --git a/include/asm-sparc/fixmap.h b/include/asm-sparc/fixmap.h deleted file mode 100644 index f18fc0755adf..000000000000 --- a/include/asm-sparc/fixmap.h +++ /dev/null @@ -1,110 +0,0 @@ -/* - * fixmap.h: compile-time virtual memory allocation - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1998 Ingo Molnar - * - * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999 - */ - -#ifndef _ASM_FIXMAP_H -#define _ASM_FIXMAP_H - -#include <linux/kernel.h> -#include <asm/page.h> -#ifdef CONFIG_HIGHMEM -#include <linux/threads.h> -#include <asm/kmap_types.h> -#endif - -/* - * Here we define all the compile-time 'special' virtual - * addresses. The point is to have a constant address at - * compile time, but to set the physical address only - * in the boot process. We allocate these special addresses - * from the top of unused virtual memory (0xfd000000 - 1 page) backwards. - * Also this lets us do fail-safe vmalloc(), we - * can guarantee that these special addresses and - * vmalloc()-ed addresses never overlap. - * - * these 'compile-time allocated' memory buffers are - * fixed-size 4k pages. (or larger if used with an increment - * highger than 1) use fixmap_set(idx,phys) to associate - * physical memory with fixmap indices. - * - * TLB entries of such buffers will not be flushed across - * task switches. - */ - -/* - * on UP currently we will have no trace of the fixmap mechanism, - * no page table allocations, etc. This might change in the - * future, say framebuffers for the console driver(s) could be - * fix-mapped? - */ -enum fixed_addresses { - FIX_HOLE, -#ifdef CONFIG_HIGHMEM - FIX_KMAP_BEGIN, - FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1, -#endif - __end_of_fixed_addresses -}; - -extern void __set_fixmap (enum fixed_addresses idx, - unsigned long phys, pgprot_t flags); - -#define set_fixmap(idx, phys) \ - __set_fixmap(idx, phys, PAGE_KERNEL) -/* - * Some hardware wants to get fixmapped without caching. - */ -#define set_fixmap_nocache(idx, phys) \ - __set_fixmap(idx, phys, PAGE_KERNEL_NOCACHE) -/* - * used by vmalloc.c. - * - * Leave one empty page between IO pages at 0xfd000000 and - * the start of the fixmap. - */ -#define FIXADDR_TOP (0xfcfff000UL) -#define FIXADDR_SIZE ((__end_of_fixed_addresses) << PAGE_SHIFT) -#define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE) - -#define __fix_to_virt(x) (FIXADDR_TOP - ((x) << PAGE_SHIFT)) -#define __virt_to_fix(x) ((FIXADDR_TOP - ((x)&PAGE_MASK)) >> PAGE_SHIFT) - -extern void __this_fixmap_does_not_exist(void); - -/* - * 'index to address' translation. If anyone tries to use the idx - * directly without tranlation, we catch the bug with a NULL-deference - * kernel oops. Illegal ranges of incoming indices are caught too. - */ -static inline unsigned long fix_to_virt(const unsigned int idx) -{ - /* - * this branch gets completely eliminated after inlining, - * except when someone tries to use fixaddr indices in an - * illegal way. (such as mixing up address types or using - * out-of-range indices). - * - * If it doesn't get removed, the linker will complain - * loudly with a reasonably clear error message.. - */ - if (idx >= __end_of_fixed_addresses) - __this_fixmap_does_not_exist(); - - return __fix_to_virt(idx); -} - -static inline unsigned long virt_to_fix(const unsigned long vaddr) -{ - BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START); - return __virt_to_fix(vaddr); -} - -#endif diff --git a/include/asm-sparc/floppy.h b/include/asm-sparc/floppy.h deleted file mode 100644 index d3978e068e2b..000000000000 --- a/include/asm-sparc/floppy.h +++ /dev/null @@ -1,388 +0,0 @@ -/* asm-sparc/floppy.h: Sparc specific parts of the Floppy driver. - * - * Copyright (C) 1995 David S. Miller (davem@davemloft.net) - */ - -#ifndef __ASM_SPARC_FLOPPY_H -#define __ASM_SPARC_FLOPPY_H - -#include <asm/page.h> -#include <asm/pgtable.h> -#include <asm/system.h> -#include <asm/idprom.h> -#include <asm/machines.h> -#include <asm/oplib.h> -#include <asm/auxio.h> -#include <asm/irq.h> - -/* We don't need no stinkin' I/O port allocation crap. */ -#undef release_region -#undef request_region -#define release_region(X, Y) do { } while(0) -#define request_region(X, Y, Z) (1) - -/* References: - * 1) Netbsd Sun floppy driver. - * 2) NCR 82077 controller manual - * 3) Intel 82077 controller manual - */ -struct sun_flpy_controller { - volatile unsigned char status_82072; /* Main Status reg. */ -#define dcr_82072 status_82072 /* Digital Control reg. */ -#define status1_82077 status_82072 /* Auxiliary Status reg. 1 */ - - volatile unsigned char data_82072; /* Data fifo. */ -#define status2_82077 data_82072 /* Auxiliary Status reg. 2 */ - - volatile unsigned char dor_82077; /* Digital Output reg. */ - volatile unsigned char tapectl_82077; /* What the? Tape control reg? */ - - volatile unsigned char status_82077; /* Main Status Register. */ -#define drs_82077 status_82077 /* Digital Rate Select reg. */ - - volatile unsigned char data_82077; /* Data fifo. */ - volatile unsigned char ___unused; - volatile unsigned char dir_82077; /* Digital Input reg. */ -#define dcr_82077 dir_82077 /* Config Control reg. */ -}; - -/* You'll only ever find one controller on a SparcStation anyways. */ -static struct sun_flpy_controller *sun_fdc = NULL; -extern volatile unsigned char *fdc_status; - -struct sun_floppy_ops { - unsigned char (*fd_inb)(int port); - void (*fd_outb)(unsigned char value, int port); -}; - -static struct sun_floppy_ops sun_fdops; - -#define fd_inb(port) sun_fdops.fd_inb(port) -#define fd_outb(value,port) sun_fdops.fd_outb(value,port) -#define fd_enable_dma() sun_fd_enable_dma() -#define fd_disable_dma() sun_fd_disable_dma() -#define fd_request_dma() (0) /* nothing... */ -#define fd_free_dma() /* nothing... */ -#define fd_clear_dma_ff() /* nothing... */ -#define fd_set_dma_mode(mode) sun_fd_set_dma_mode(mode) -#define fd_set_dma_addr(addr) sun_fd_set_dma_addr(addr) -#define fd_set_dma_count(count) sun_fd_set_dma_count(count) -#define fd_enable_irq() /* nothing... */ -#define fd_disable_irq() /* nothing... */ -#define fd_cacheflush(addr, size) /* nothing... */ -#define fd_request_irq() sun_fd_request_irq() -#define fd_free_irq() /* nothing... */ -#if 0 /* P3: added by Alain, these cause a MMU corruption. 19960524 XXX */ -#define fd_dma_mem_alloc(size) ((unsigned long) vmalloc(size)) -#define fd_dma_mem_free(addr,size) (vfree((void *)(addr))) -#endif - -/* XXX This isn't really correct. XXX */ -#define get_dma_residue(x) (0) - -#define FLOPPY0_TYPE 4 -#define FLOPPY1_TYPE 0 - -/* Super paranoid... */ -#undef HAVE_DISABLE_HLT - -/* Here is where we catch the floppy driver trying to initialize, - * therefore this is where we call the PROM device tree probing - * routine etc. on the Sparc. - */ -#define FDC1 sun_floppy_init() - -#define N_FDC 1 -#define N_DRIVE 8 - -/* No 64k boundary crossing problems on the Sparc. */ -#define CROSS_64KB(a,s) (0) - -/* Routines unique to each controller type on a Sun. */ -static void sun_set_dor(unsigned char value, int fdc_82077) -{ - if (sparc_cpu_model == sun4c) { - unsigned int bits = 0; - if (value & 0x10) - bits |= AUXIO_FLPY_DSEL; - if ((value & 0x80) == 0) - bits |= AUXIO_FLPY_EJCT; - set_auxio(bits, (~bits) & (AUXIO_FLPY_DSEL|AUXIO_FLPY_EJCT)); - } - if (fdc_82077) { - sun_fdc->dor_82077 = value; - } -} - -static unsigned char sun_read_dir(void) -{ - if (sparc_cpu_model == sun4c) - return (get_auxio() & AUXIO_FLPY_DCHG) ? 0x80 : 0; - else - return sun_fdc->dir_82077; -} - -static unsigned char sun_82072_fd_inb(int port) -{ - udelay(5); - switch(port & 7) { - default: - printk("floppy: Asked to read unknown port %d\n", port); - panic("floppy: Port bolixed."); - case 4: /* FD_STATUS */ - return sun_fdc->status_82072 & ~STATUS_DMA; - case 5: /* FD_DATA */ - return sun_fdc->data_82072; - case 7: /* FD_DIR */ - return sun_read_dir(); - }; - panic("sun_82072_fd_inb: How did I get here?"); -} - -static void sun_82072_fd_outb(unsigned char value, int port) -{ - udelay(5); - switch(port & 7) { - default: - printk("floppy: Asked to write to unknown port %d\n", port); - panic("floppy: Port bolixed."); - case 2: /* FD_DOR */ - sun_set_dor(value, 0); - break; - case 5: /* FD_DATA */ - sun_fdc->data_82072 = value; - break; - case 7: /* FD_DCR */ - sun_fdc->dcr_82072 = value; - break; - case 4: /* FD_STATUS */ - sun_fdc->status_82072 = value; - break; - }; - return; -} - -static unsigned char sun_82077_fd_inb(int port) -{ - udelay(5); - switch(port & 7) { - default: - printk("floppy: Asked to read unknown port %d\n", port); - panic("floppy: Port bolixed."); - case 0: /* FD_STATUS_0 */ - return sun_fdc->status1_82077; - case 1: /* FD_STATUS_1 */ - return sun_fdc->status2_82077; - case 2: /* FD_DOR */ - return sun_fdc->dor_82077; - case 3: /* FD_TDR */ - return sun_fdc->tapectl_82077; - case 4: /* FD_STATUS */ - return sun_fdc->status_82077 & ~STATUS_DMA; - case 5: /* FD_DATA */ - return sun_fdc->data_82077; - case 7: /* FD_DIR */ - return sun_read_dir(); - }; - panic("sun_82077_fd_inb: How did I get here?"); -} - -static void sun_82077_fd_outb(unsigned char value, int port) -{ - udelay(5); - switch(port & 7) { - default: - printk("floppy: Asked to write to unknown port %d\n", port); - panic("floppy: Port bolixed."); - case 2: /* FD_DOR */ - sun_set_dor(value, 1); - break; - case 5: /* FD_DATA */ - sun_fdc->data_82077 = value; - break; - case 7: /* FD_DCR */ - sun_fdc->dcr_82077 = value; - break; - case 4: /* FD_STATUS */ - sun_fdc->status_82077 = value; - break; - case 3: /* FD_TDR */ - sun_fdc->tapectl_82077 = value; - break; - }; - return; -} - -/* For pseudo-dma (Sun floppy drives have no real DMA available to - * them so we must eat the data fifo bytes directly ourselves) we have - * three state variables. doing_pdma tells our inline low-level - * assembly floppy interrupt entry point whether it should sit and eat - * bytes from the fifo or just transfer control up to the higher level - * floppy interrupt c-code. I tried very hard but I could not get the - * pseudo-dma to work in c-code without getting many overruns and - * underruns. If non-zero, doing_pdma encodes the direction of - * the transfer for debugging. 1=read 2=write - */ -extern char *pdma_vaddr; -extern unsigned long pdma_size; -extern volatile int doing_pdma; - -/* This is software state */ -extern char *pdma_base; -extern unsigned long pdma_areasize; - -/* Common routines to all controller types on the Sparc. */ -static inline void virtual_dma_init(void) -{ - /* nothing... */ -} - -static inline void sun_fd_disable_dma(void) -{ - doing_pdma = 0; - if (pdma_base) { - mmu_unlockarea(pdma_base, pdma_areasize); - pdma_base = NULL; - } -} - -static inline void sun_fd_set_dma_mode(int mode) -{ - switch(mode) { - case DMA_MODE_READ: - doing_pdma = 1; - break; - case DMA_MODE_WRITE: - doing_pdma = 2; - break; - default: - printk("Unknown dma mode %d\n", mode); - panic("floppy: Giving up..."); - } -} - -static inline void sun_fd_set_dma_addr(char *buffer) -{ - pdma_vaddr = buffer; -} - -static inline void sun_fd_set_dma_count(int length) -{ - pdma_size = length; -} - -static inline void sun_fd_enable_dma(void) -{ - pdma_vaddr = mmu_lockarea(pdma_vaddr, pdma_size); - pdma_base = pdma_vaddr; - pdma_areasize = pdma_size; -} - -/* Our low-level entry point in arch/sparc/kernel/entry.S */ -extern int sparc_floppy_request_irq(int irq, unsigned long flags, - irq_handler_t irq_handler); - -static int sun_fd_request_irq(void) -{ - static int once = 0; - int error; - - if(!once) { - once = 1; - error = sparc_floppy_request_irq(FLOPPY_IRQ, - IRQF_DISABLED, - floppy_interrupt); - return ((error == 0) ? 0 : -1); - } else return 0; -} - -static struct linux_prom_registers fd_regs[2]; - -static int sun_floppy_init(void) -{ - char state[128]; - int tnode, fd_node, num_regs; - struct resource r; - - use_virtual_dma = 1; - - FLOPPY_IRQ = 11; - /* Forget it if we aren't on a machine that could possibly - * ever have a floppy drive. - */ - if((sparc_cpu_model != sun4c && sparc_cpu_model != sun4m) || - ((idprom->id_machtype == (SM_SUN4C | SM_4C_SLC)) || - (idprom->id_machtype == (SM_SUN4C | SM_4C_ELC)))) { - /* We certainly don't have a floppy controller. */ - goto no_sun_fdc; - } - /* Well, try to find one. */ - tnode = prom_getchild(prom_root_node); - fd_node = prom_searchsiblings(tnode, "obio"); - if(fd_node != 0) { - tnode = prom_getchild(fd_node); - fd_node = prom_searchsiblings(tnode, "SUNW,fdtwo"); - } else { - fd_node = prom_searchsiblings(tnode, "fd"); - } - if(fd_node == 0) { - goto no_sun_fdc; - } - - /* The sun4m lets us know if the controller is actually usable. */ - if(sparc_cpu_model == sun4m && - prom_getproperty(fd_node, "status", state, sizeof(state)) != -1) { - if(!strcmp(state, "disabled")) { - goto no_sun_fdc; - } - } - num_regs = prom_getproperty(fd_node, "reg", (char *) fd_regs, sizeof(fd_regs)); - num_regs = (num_regs / sizeof(fd_regs[0])); - prom_apply_obio_ranges(fd_regs, num_regs); - memset(&r, 0, sizeof(r)); - r.flags = fd_regs[0].which_io; - r.start = fd_regs[0].phys_addr; - sun_fdc = (struct sun_flpy_controller *) - sbus_ioremap(&r, 0, fd_regs[0].reg_size, "floppy"); - - /* Last minute sanity check... */ - if(sun_fdc->status_82072 == 0xff) { - sun_fdc = NULL; - goto no_sun_fdc; - } - - sun_fdops.fd_inb = sun_82077_fd_inb; - sun_fdops.fd_outb = sun_82077_fd_outb; - fdc_status = &sun_fdc->status_82077; - - if (sun_fdc->dor_82077 == 0x80) { - sun_fdc->dor_82077 = 0x02; - if (sun_fdc->dor_82077 == 0x80) { - sun_fdops.fd_inb = sun_82072_fd_inb; - sun_fdops.fd_outb = sun_82072_fd_outb; - fdc_status = &sun_fdc->status_82072; - } - } - - /* Success... */ - allowed_drive_mask = 0x01; - return (int) sun_fdc; - -no_sun_fdc: - return -1; -} - -static int sparc_eject(void) -{ - set_dor(0x00, 0xff, 0x90); - udelay(500); - set_dor(0x00, 0x6f, 0x00); - udelay(500); - return 0; -} - -#define fd_eject(drive) sparc_eject() - -#define EXTRA_FLOPPY_PARAMS - -#endif /* !(__ASM_SPARC_FLOPPY_H) */ diff --git a/include/asm-sparc/futex.h b/include/asm-sparc/futex.h deleted file mode 100644 index 6a332a9f099c..000000000000 --- a/include/asm-sparc/futex.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_FUTEX_H -#define _ASM_FUTEX_H - -#include <asm-generic/futex.h> - -#endif diff --git a/include/asm-sparc/hardirq.h b/include/asm-sparc/hardirq.h deleted file mode 100644 index 4f63ed8df551..000000000000 --- a/include/asm-sparc/hardirq.h +++ /dev/null @@ -1,23 +0,0 @@ -/* hardirq.h: 32-bit Sparc hard IRQ support. - * - * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu) - * Copyright (C) 1998-2000 Anton Blanchard (anton@samba.org) - */ - -#ifndef __SPARC_HARDIRQ_H -#define __SPARC_HARDIRQ_H - -#include <linux/threads.h> -#include <linux/spinlock.h> -#include <linux/cache.h> - -/* entry.S is sensitive to the offsets of these fields */ /* XXX P3 Is it? */ -typedef struct { - unsigned int __softirq_pending; -} ____cacheline_aligned irq_cpustat_t; - -#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */ - -#define HARDIRQ_BITS 8 - -#endif /* __SPARC_HARDIRQ_H */ diff --git a/include/asm-sparc/head.h b/include/asm-sparc/head.h deleted file mode 100644 index 7c35491a8b53..000000000000 --- a/include/asm-sparc/head.h +++ /dev/null @@ -1,102 +0,0 @@ -#ifndef __SPARC_HEAD_H -#define __SPARC_HEAD_H - -#define KERNBASE 0xf0000000 /* First address the kernel will eventually be */ -#define LOAD_ADDR 0x4000 /* prom jumps to us here unless this is elf /boot */ -#define SUN4C_SEGSZ (1 << 18) -#define SRMMU_L1_KBASE_OFFSET ((KERNBASE>>24)<<2) /* Used in boot remapping. */ -#define INTS_ENAB 0x01 /* entry.S uses this. */ - -#define SUN4_PROM_VECTOR 0xFFE81000 /* SUN4 PROM needs to be hardwired */ - -#define WRITE_PAUSE nop; nop; nop; /* Have to do this after %wim/%psr chg */ -#define NOP_INSN 0x01000000 /* Used to patch sparc_save_state */ - -/* Here are some trap goodies */ - -/* Generic trap entry. */ -#define TRAP_ENTRY(type, label) \ - rd %psr, %l0; b label; rd %wim, %l3; nop; - -/* Data/text faults. Defaults to sun4c version at boot time. */ -#define SPARC_TFAULT rd %psr, %l0; rd %wim, %l3; b sun4c_fault; mov 1, %l7; -#define SPARC_DFAULT rd %psr, %l0; rd %wim, %l3; b sun4c_fault; mov 0, %l7; -#define SRMMU_TFAULT rd %psr, %l0; rd %wim, %l3; b srmmu_fault; mov 1, %l7; -#define SRMMU_DFAULT rd %psr, %l0; rd %wim, %l3; b srmmu_fault; mov 0, %l7; - -/* This is for traps we should NEVER get. */ -#define BAD_TRAP(num) \ - rd %psr, %l0; mov num, %l7; b bad_trap_handler; rd %wim, %l3; - -/* This is for traps when we want just skip the instruction which caused it */ -#define SKIP_TRAP(type, name) \ - jmpl %l2, %g0; rett %l2 + 4; nop; nop; - -/* Notice that for the system calls we pull a trick. We load up a - * different pointer to the system call vector table in %l7, but call - * the same generic system call low-level entry point. The trap table - * entry sequences are also HyperSparc pipeline friendly ;-) - */ - -/* Software trap for Linux system calls. */ -#define LINUX_SYSCALL_TRAP \ - sethi %hi(sys_call_table), %l7; \ - or %l7, %lo(sys_call_table), %l7; \ - b linux_sparc_syscall; \ - rd %psr, %l0; - -#define BREAKPOINT_TRAP \ - b breakpoint_trap; \ - rd %psr,%l0; \ - nop; \ - nop; - -#ifdef CONFIG_KGDB -#define KGDB_TRAP(num) \ - b kgdb_trap_low; \ - rd %psr,%l0; \ - nop; \ - nop; -#else -#define KGDB_TRAP(num) \ - BAD_TRAP(num) -#endif - -/* The Get Condition Codes software trap for userland. */ -#define GETCC_TRAP \ - b getcc_trap_handler; mov %psr, %l0; nop; nop; - -/* The Set Condition Codes software trap for userland. */ -#define SETCC_TRAP \ - b setcc_trap_handler; mov %psr, %l0; nop; nop; - -/* The Get PSR software trap for userland. */ -#define GETPSR_TRAP \ - mov %psr, %i0; jmp %l2; rett %l2 + 4; nop; - -/* This is for hard interrupts from level 1-14, 15 is non-maskable (nmi) and - * gets handled with another macro. - */ -#define TRAP_ENTRY_INTERRUPT(int_level) \ - mov int_level, %l7; rd %psr, %l0; b real_irq_entry; rd %wim, %l3; - -/* NMI's (Non Maskable Interrupts) are special, you can't keep them - * from coming in, and basically if you get one, the shows over. ;( - * On the sun4c they are usually asynchronous memory errors, on the - * the sun4m they could be either due to mem errors or a software - * initiated interrupt from the prom/kern on an SMP box saying "I - * command you to do CPU tricks, read your mailbox for more info." - */ -#define NMI_TRAP \ - rd %wim, %l3; b linux_trap_nmi_sun4c; mov %psr, %l0; nop; - -/* Window overflows/underflows are special and we need to try to be as - * efficient as possible here.... - */ -#define WINDOW_SPILL \ - rd %psr, %l0; rd %wim, %l3; b spill_window_entry; andcc %l0, PSR_PS, %g0; - -#define WINDOW_FILL \ - rd %psr, %l0; rd %wim, %l3; b fill_window_entry; andcc %l0, PSR_PS, %g0; - -#endif /* __SPARC_HEAD_H */ diff --git a/include/asm-sparc/highmem.h b/include/asm-sparc/highmem.h deleted file mode 100644 index 3de42e776274..000000000000 --- a/include/asm-sparc/highmem.h +++ /dev/null @@ -1,81 +0,0 @@ -/* - * highmem.h: virtual kernel memory mappings for high memory - * - * Used in CONFIG_HIGHMEM systems for memory pages which - * are not addressable by direct kernel virtual addresses. - * - * Copyright (C) 1999 Gerhard Wichert, Siemens AG - * Gerhard.Wichert@pdb.siemens.de - * - * - * Redesigned the x86 32-bit VM architecture to deal with - * up to 16 Terrabyte physical memory. With current x86 CPUs - * we now support up to 64 Gigabytes physical RAM. - * - * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com> - */ - -#ifndef _ASM_HIGHMEM_H -#define _ASM_HIGHMEM_H - -#ifdef __KERNEL__ - -#include <linux/interrupt.h> -#include <asm/fixmap.h> -#include <asm/vaddrs.h> -#include <asm/kmap_types.h> -#include <asm/pgtable.h> - -/* declarations for highmem.c */ -extern unsigned long highstart_pfn, highend_pfn; - -extern pte_t *kmap_pte; -extern pgprot_t kmap_prot; -extern pte_t *pkmap_page_table; - -extern void kmap_init(void) __init; - -/* - * Right now we initialize only a single pte table. It can be extended - * easily, subsequent pte tables have to be allocated in one physical - * chunk of RAM. Currently the simplest way to do this is to align the - * pkmap region on a pagetable boundary (4MB). - */ -#define LAST_PKMAP 1024 -#define PKMAP_SIZE (LAST_PKMAP << PAGE_SHIFT) -#define PKMAP_BASE PMD_ALIGN(SRMMU_NOCACHE_VADDR + (SRMMU_MAX_NOCACHE_PAGES << PAGE_SHIFT)) - -#define LAST_PKMAP_MASK (LAST_PKMAP - 1) -#define PKMAP_NR(virt) ((virt - PKMAP_BASE) >> PAGE_SHIFT) -#define PKMAP_ADDR(nr) (PKMAP_BASE + ((nr) << PAGE_SHIFT)) - -#define PKMAP_END (PKMAP_ADDR(LAST_PKMAP)) - -extern void *kmap_high(struct page *page); -extern void kunmap_high(struct page *page); - -static inline void *kmap(struct page *page) -{ - BUG_ON(in_interrupt()); - if (!PageHighMem(page)) - return page_address(page); - return kmap_high(page); -} - -static inline void kunmap(struct page *page) -{ - BUG_ON(in_interrupt()); - if (!PageHighMem(page)) - return; - kunmap_high(page); -} - -extern void *kmap_atomic(struct page *page, enum km_type type); -extern void kunmap_atomic(void *kvaddr, enum km_type type); -extern struct page *kmap_atomic_to_page(void *vaddr); - -#define flush_cache_kmaps() flush_cache_all() - -#endif /* __KERNEL__ */ - -#endif /* _ASM_HIGHMEM_H */ diff --git a/include/asm-sparc/hw_irq.h b/include/asm-sparc/hw_irq.h deleted file mode 100644 index 8d30a7694be2..000000000000 --- a/include/asm-sparc/hw_irq.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_SPARC_HW_IRQ_H -#define __ASM_SPARC_HW_IRQ_H - -/* Dummy include. */ - -#endif diff --git a/include/asm-sparc/ide.h b/include/asm-sparc/ide.h deleted file mode 100644 index afd1736ed480..000000000000 --- a/include/asm-sparc/ide.h +++ /dev/null @@ -1,95 +0,0 @@ -/* ide.h: SPARC PCI specific IDE glue. - * - * Copyright (C) 1997 David S. Miller (davem@davemloft.net) - * Copyright (C) 1998 Eddie C. Dost (ecd@skynet.be) - * Adaptation from sparc64 version to sparc by Pete Zaitcev. - */ - -#ifndef _SPARC_IDE_H -#define _SPARC_IDE_H - -#ifdef __KERNEL__ - -#include <asm/pgtable.h> -#include <asm/io.h> -#include <asm/psr.h> - -#undef MAX_HWIFS -#define MAX_HWIFS 2 - -#define __ide_insl(data_reg, buffer, wcount) \ - __ide_insw(data_reg, buffer, (wcount)<<1) -#define __ide_outsl(data_reg, buffer, wcount) \ - __ide_outsw(data_reg, buffer, (wcount)<<1) - -/* On sparc, I/O ports and MMIO registers are accessed identically. */ -#define __ide_mm_insw __ide_insw -#define __ide_mm_insl __ide_insl -#define __ide_mm_outsw __ide_outsw -#define __ide_mm_outsl __ide_outsl - -static inline void __ide_insw(unsigned long port, - void *dst, - unsigned long count) -{ - volatile unsigned short *data_port; - /* unsigned long end = (unsigned long)dst + (count << 1); */ /* P3 */ - u16 *ps = dst; - u32 *pi; - - data_port = (volatile unsigned short *)port; - - if(((unsigned long)ps) & 0x2) { - *ps++ = *data_port; - count--; - } - pi = (u32 *)ps; - while(count >= 2) { - u32 w; - - w = (*data_port) << 16; - w |= (*data_port); - *pi++ = w; - count -= 2; - } - ps = (u16 *)pi; - if(count) - *ps++ = *data_port; - - /* __flush_dcache_range((unsigned long)dst, end); */ /* P3 see hme */ -} - -static inline void __ide_outsw(unsigned long port, - const void *src, - unsigned long count) -{ - volatile unsigned short *data_port; - /* unsigned long end = (unsigned long)src + (count << 1); */ - const u16 *ps = src; - const u32 *pi; - - data_port = (volatile unsigned short *)port; - - if(((unsigned long)src) & 0x2) { - *data_port = *ps++; - count--; - } - pi = (const u32 *)ps; - while(count >= 2) { - u32 w; - - w = *pi++; - *data_port = (w >> 16); - *data_port = w; - count -= 2; - } - ps = (const u16 *)pi; - if(count) - *data_port = *ps; - - /* __flush_dcache_range((unsigned long)src, end); */ /* P3 see hme */ -} - -#endif /* __KERNEL__ */ - -#endif /* _SPARC_IDE_H */ diff --git a/include/asm-sparc/idprom.h b/include/asm-sparc/idprom.h deleted file mode 100644 index 41adb417a4e5..000000000000 --- a/include/asm-sparc/idprom.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * idprom.h: Macros and defines for idprom routines - * - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - */ - -#ifndef _SPARC_IDPROM_H -#define _SPARC_IDPROM_H - -#include <linux/types.h> - -struct idprom { - u8 id_format; /* Format identifier (always 0x01) */ - u8 id_machtype; /* Machine type */ - u8 id_ethaddr[6]; /* Hardware ethernet address */ - s32 id_date; /* Date of manufacture */ - u32 id_sernum:24; /* Unique serial number */ - u8 id_cksum; /* Checksum - xor of the data bytes */ - u8 reserved[16]; -}; - -extern struct idprom *idprom; -extern void idprom_init(void); - -#endif /* !(_SPARC_IDPROM_H) */ diff --git a/include/asm-sparc/io-unit.h b/include/asm-sparc/io-unit.h deleted file mode 100644 index 96823b47fd45..000000000000 --- a/include/asm-sparc/io-unit.h +++ /dev/null @@ -1,62 +0,0 @@ -/* io-unit.h: Definitions for the sun4d IO-UNIT. - * - * Copyright (C) 1997,1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz) - */ -#ifndef _SPARC_IO_UNIT_H -#define _SPARC_IO_UNIT_H - -#include <linux/spinlock.h> -#include <asm/page.h> -#include <asm/pgtable.h> - -/* The io-unit handles all virtual to physical address translations - * that occur between the SBUS and physical memory. Access by - * the cpu to IO registers and similar go over the xdbus so are - * translated by the on chip SRMMU. The io-unit and the srmmu do - * not need to have the same translations at all, in fact most - * of the time the translations they handle are a disjunct set. - * Basically the io-unit handles all dvma sbus activity. - */ - -/* AIEEE, unlike the nice sun4m, these monsters have - fixed DMA range 64M */ - -#define IOUNIT_DMA_BASE 0xfc000000 /* TOP - 64M */ -#define IOUNIT_DMA_SIZE 0x04000000 /* 64M */ -/* We use last 1M for sparc_dvma_malloc */ -#define IOUNIT_DVMA_SIZE 0x00100000 /* 1M */ - -/* The format of an iopte in the external page tables */ -#define IOUPTE_PAGE 0xffffff00 /* Physical page number (PA[35:12]) */ -#define IOUPTE_CACHE 0x00000080 /* Cached (in Viking/MXCC) */ -/* XXX Jakub, find out how to program SBUS streaming cache on XDBUS/sun4d. - * XXX Actually, all you should need to do is find out where the registers - * XXX are and copy over the sparc64 implementation I wrote. There may be - * XXX some horrible hwbugs though, so be careful. -DaveM - */ -#define IOUPTE_STREAM 0x00000040 /* Translation can use streaming cache */ -#define IOUPTE_INTRA 0x00000008 /* SBUS direct slot->slot transfer */ -#define IOUPTE_WRITE 0x00000004 /* Writeable */ -#define IOUPTE_VALID 0x00000002 /* IOPTE is valid */ -#define IOUPTE_PARITY 0x00000001 /* Parity is checked during DVMA */ - -struct iounit_struct { - unsigned long bmap[(IOUNIT_DMA_SIZE >> (PAGE_SHIFT + 3)) / sizeof(unsigned long)]; - spinlock_t lock; - iopte_t *page_table; - unsigned long rotor[3]; - unsigned long limit[4]; -}; - -#define IOUNIT_BMAP1_START 0x00000000 -#define IOUNIT_BMAP1_END (IOUNIT_DMA_SIZE >> (PAGE_SHIFT + 1)) -#define IOUNIT_BMAP2_START IOUNIT_BMAP1_END -#define IOUNIT_BMAP2_END IOUNIT_BMAP2_START + (IOUNIT_DMA_SIZE >> (PAGE_SHIFT + 2)) -#define IOUNIT_BMAPM_START IOUNIT_BMAP2_END -#define IOUNIT_BMAPM_END ((IOUNIT_DMA_SIZE - IOUNIT_DVMA_SIZE) >> PAGE_SHIFT) - -extern __u32 iounit_map_dma_init(struct sbus_bus *, int); -#define iounit_map_dma_finish(sbus, addr, len) mmu_release_scsi_one(addr, len, sbus) -extern __u32 iounit_map_dma_page(__u32, void *, struct sbus_bus *); - -#endif /* !(_SPARC_IO_UNIT_H) */ diff --git a/include/asm-sparc/io.h b/include/asm-sparc/io.h deleted file mode 100644 index 3a3e7bdb06b3..000000000000 --- a/include/asm-sparc/io.h +++ /dev/null @@ -1,325 +0,0 @@ -#ifndef __SPARC_IO_H -#define __SPARC_IO_H - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/ioport.h> /* struct resource */ - -#include <asm/page.h> /* IO address mapping routines need this */ -#include <asm/system.h> - -#define page_to_phys(page) (((page) - mem_map) << PAGE_SHIFT) - -static inline u32 flip_dword (u32 l) -{ - return ((l&0xff)<<24) | (((l>>8)&0xff)<<16) | (((l>>16)&0xff)<<8)| ((l>>24)&0xff); -} - -static inline u16 flip_word (u16 w) -{ - return ((w&0xff) << 8) | ((w>>8)&0xff); -} - -#define mmiowb() - -/* - * Memory mapped I/O to PCI - */ - -static inline u8 __raw_readb(const volatile void __iomem *addr) -{ - return *(__force volatile u8 *)addr; -} - -static inline u16 __raw_readw(const volatile void __iomem *addr) -{ - return *(__force volatile u16 *)addr; -} - -static inline u32 __raw_readl(const volatile void __iomem *addr) -{ - return *(__force volatile u32 *)addr; -} - -static inline void __raw_writeb(u8 b, volatile void __iomem *addr) -{ - *(__force volatile u8 *)addr = b; -} - -static inline void __raw_writew(u16 w, volatile void __iomem *addr) -{ - *(__force volatile u16 *)addr = w; -} - -static inline void __raw_writel(u32 l, volatile void __iomem *addr) -{ - *(__force volatile u32 *)addr = l; -} - -static inline u8 __readb(const volatile void __iomem *addr) -{ - return *(__force volatile u8 *)addr; -} - -static inline u16 __readw(const volatile void __iomem *addr) -{ - return flip_word(*(__force volatile u16 *)addr); -} - -static inline u32 __readl(const volatile void __iomem *addr) -{ - return flip_dword(*(__force volatile u32 *)addr); -} - -static inline void __writeb(u8 b, volatile void __iomem *addr) -{ - *(__force volatile u8 *)addr = b; -} - -static inline void __writew(u16 w, volatile void __iomem *addr) -{ - *(__force volatile u16 *)addr = flip_word(w); -} - -static inline void __writel(u32 l, volatile void __iomem *addr) -{ - *(__force volatile u32 *)addr = flip_dword(l); -} - -#define readb(__addr) __readb(__addr) -#define readw(__addr) __readw(__addr) -#define readl(__addr) __readl(__addr) -#define readb_relaxed(__addr) readb(__addr) -#define readw_relaxed(__addr) readw(__addr) -#define readl_relaxed(__addr) readl(__addr) - -#define writeb(__b, __addr) __writeb((__b),(__addr)) -#define writew(__w, __addr) __writew((__w),(__addr)) -#define writel(__l, __addr) __writel((__l),(__addr)) - -/* - * I/O space operations - * - * Arrangement on a Sun is somewhat complicated. - * - * First of all, we want to use standard Linux drivers - * for keyboard, PC serial, etc. These drivers think - * they access I/O space and use inb/outb. - * On the other hand, EBus bridge accepts PCI *memory* - * cycles and converts them into ISA *I/O* cycles. - * Ergo, we want inb & outb to generate PCI memory cycles. - * - * If we want to issue PCI *I/O* cycles, we do this - * with a low 64K fixed window in PCIC. This window gets - * mapped somewhere into virtual kernel space and we - * can use inb/outb again. - */ -#define inb_local(__addr) __readb((void __iomem *)(unsigned long)(__addr)) -#define inb(__addr) __readb((void __iomem *)(unsigned long)(__addr)) -#define inw(__addr) __readw((void __iomem *)(unsigned long)(__addr)) -#define inl(__addr) __readl((void __iomem *)(unsigned long)(__addr)) - -#define outb_local(__b, __addr) __writeb(__b, (void __iomem *)(unsigned long)(__addr)) -#define outb(__b, __addr) __writeb(__b, (void __iomem *)(unsigned long)(__addr)) -#define outw(__w, __addr) __writew(__w, (void __iomem *)(unsigned long)(__addr)) -#define outl(__l, __addr) __writel(__l, (void __iomem *)(unsigned long)(__addr)) - -#define inb_p(__addr) inb(__addr) -#define outb_p(__b, __addr) outb(__b, __addr) -#define inw_p(__addr) inw(__addr) -#define outw_p(__w, __addr) outw(__w, __addr) -#define inl_p(__addr) inl(__addr) -#define outl_p(__l, __addr) outl(__l, __addr) - -void outsb(unsigned long addr, const void *src, unsigned long cnt); -void outsw(unsigned long addr, const void *src, unsigned long cnt); -void outsl(unsigned long addr, const void *src, unsigned long cnt); -void insb(unsigned long addr, void *dst, unsigned long count); -void insw(unsigned long addr, void *dst, unsigned long count); -void insl(unsigned long addr, void *dst, unsigned long count); - -#define IO_SPACE_LIMIT 0xffffffff - -/* - * SBus accessors. - * - * SBus has only one, memory mapped, I/O space. - * We do not need to flip bytes for SBus of course. - */ -static inline u8 _sbus_readb(const volatile void __iomem *addr) -{ - return *(__force volatile u8 *)addr; -} - -static inline u16 _sbus_readw(const volatile void __iomem *addr) -{ - return *(__force volatile u16 *)addr; -} - -static inline u32 _sbus_readl(const volatile void __iomem *addr) -{ - return *(__force volatile u32 *)addr; -} - -static inline void _sbus_writeb(u8 b, volatile void __iomem *addr) -{ - *(__force volatile u8 *)addr = b; -} - -static inline void _sbus_writew(u16 w, volatile void __iomem *addr) -{ - *(__force volatile u16 *)addr = w; -} - -static inline void _sbus_writel(u32 l, volatile void __iomem *addr) -{ - *(__force volatile u32 *)addr = l; -} - -/* - * The only reason for #define's is to hide casts to unsigned long. - */ -#define sbus_readb(__addr) _sbus_readb(__addr) -#define sbus_readw(__addr) _sbus_readw(__addr) -#define sbus_readl(__addr) _sbus_readl(__addr) -#define sbus_writeb(__b, __addr) _sbus_writeb(__b, __addr) -#define sbus_writew(__w, __addr) _sbus_writew(__w, __addr) -#define sbus_writel(__l, __addr) _sbus_writel(__l, __addr) - -static inline void sbus_memset_io(volatile void __iomem *__dst, int c, __kernel_size_t n) -{ - while(n--) { - sbus_writeb(c, __dst); - __dst++; - } -} - -static inline void -_memset_io(volatile void __iomem *dst, int c, __kernel_size_t n) -{ - volatile void __iomem *d = dst; - - while (n--) { - writeb(c, d); - d++; - } -} - -#define memset_io(d,c,sz) _memset_io(d,c,sz) - -static inline void -_memcpy_fromio(void *dst, const volatile void __iomem *src, __kernel_size_t n) -{ - char *d = dst; - - while (n--) { - char tmp = readb(src); - *d++ = tmp; - src++; - } -} - -#define memcpy_fromio(d,s,sz) _memcpy_fromio(d,s,sz) - -static inline void -_memcpy_toio(volatile void __iomem *dst, const void *src, __kernel_size_t n) -{ - const char *s = src; - volatile void __iomem *d = dst; - - while (n--) { - char tmp = *s++; - writeb(tmp, d); - d++; - } -} - -#define memcpy_toio(d,s,sz) _memcpy_toio(d,s,sz) - -#ifdef __KERNEL__ - -/* - * Bus number may be embedded in the higher bits of the physical address. - * This is why we have no bus number argument to ioremap(). - */ -extern void __iomem *ioremap(unsigned long offset, unsigned long size); -#define ioremap_nocache(X,Y) ioremap((X),(Y)) -extern void iounmap(volatile void __iomem *addr); - -#define ioread8(X) readb(X) -#define ioread16(X) readw(X) -#define ioread32(X) readl(X) -#define iowrite8(val,X) writeb(val,X) -#define iowrite16(val,X) writew(val,X) -#define iowrite32(val,X) writel(val,X) - -static inline void ioread8_rep(void __iomem *port, void *buf, unsigned long count) -{ - insb((unsigned long __force)port, buf, count); -} -static inline void ioread16_rep(void __iomem *port, void *buf, unsigned long count) -{ - insw((unsigned long __force)port, buf, count); -} - -static inline void ioread32_rep(void __iomem *port, void *buf, unsigned long count) -{ - insl((unsigned long __force)port, buf, count); -} - -static inline void iowrite8_rep(void __iomem *port, const void *buf, unsigned long count) -{ - outsb((unsigned long __force)port, buf, count); -} - -static inline void iowrite16_rep(void __iomem *port, const void *buf, unsigned long count) -{ - outsw((unsigned long __force)port, buf, count); -} - -static inline void iowrite32_rep(void __iomem *port, const void *buf, unsigned long count) -{ - outsl((unsigned long __force)port, buf, count); -} - -/* Create a virtual mapping cookie for an IO port range */ -extern void __iomem *ioport_map(unsigned long port, unsigned int nr); -extern void ioport_unmap(void __iomem *); - -/* Create a virtual mapping cookie for a PCI BAR (memory or IO) */ -struct pci_dev; -extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max); -extern void pci_iounmap(struct pci_dev *dev, void __iomem *); - -/* - * Bus number may be in res->flags... somewhere. - */ -extern void __iomem *sbus_ioremap(struct resource *res, unsigned long offset, - unsigned long size, char *name); -extern void sbus_iounmap(volatile void __iomem *vaddr, unsigned long size); - - -/* - * At the moment, we do not use CMOS_READ anywhere outside of rtc.c, - * so rtc_port is static in it. This should not change unless a new - * hardware pops up. - */ -#define RTC_PORT(x) (rtc_port + (x)) -#define RTC_ALWAYS_BCD 0 - -#endif - -#define __ARCH_HAS_NO_PAGE_ZERO_MAPPED 1 - -/* - * Convert a physical pointer to a virtual kernel pointer for /dev/mem - * access - */ -#define xlate_dev_mem_ptr(p) __va(p) - -/* - * Convert a virtual cached pointer to an uncached pointer - */ -#define xlate_dev_kmem_ptr(p) p - -#endif /* !(__SPARC_IO_H) */ diff --git a/include/asm-sparc/ioctl.h b/include/asm-sparc/ioctl.h deleted file mode 100644 index 7d6bd51321b9..000000000000 --- a/include/asm-sparc/ioctl.h +++ /dev/null @@ -1,67 +0,0 @@ -#ifndef _SPARC_IOCTL_H -#define _SPARC_IOCTL_H - -/* - * Our DIR and SIZE overlap in order to simulteneously provide - * a non-zero _IOC_NONE (for binary compatibility) and - * 14 bits of size as on i386. Here's the layout: - * - * 0xE0000000 DIR - * 0x80000000 DIR = WRITE - * 0x40000000 DIR = READ - * 0x20000000 DIR = NONE - * 0x3FFF0000 SIZE (overlaps NONE bit) - * 0x0000FF00 TYPE - * 0x000000FF NR (CMD) - */ - -#define _IOC_NRBITS 8 -#define _IOC_TYPEBITS 8 -#define _IOC_SIZEBITS 13 /* Actually 14, see below. */ -#define _IOC_DIRBITS 3 - -#define _IOC_NRMASK ((1 << _IOC_NRBITS)-1) -#define _IOC_TYPEMASK ((1 << _IOC_TYPEBITS)-1) -#define _IOC_SIZEMASK ((1 << _IOC_SIZEBITS)-1) -#define _IOC_XSIZEMASK ((1 << (_IOC_SIZEBITS+1))-1) -#define _IOC_DIRMASK ((1 << _IOC_DIRBITS)-1) - -#define _IOC_NRSHIFT 0 -#define _IOC_TYPESHIFT (_IOC_NRSHIFT + _IOC_NRBITS) -#define _IOC_SIZESHIFT (_IOC_TYPESHIFT + _IOC_TYPEBITS) -#define _IOC_DIRSHIFT (_IOC_SIZESHIFT + _IOC_SIZEBITS) - -#define _IOC_NONE 1U -#define _IOC_READ 2U -#define _IOC_WRITE 4U - -#define _IOC(dir,type,nr,size) \ - (((dir) << _IOC_DIRSHIFT) | \ - ((type) << _IOC_TYPESHIFT) | \ - ((nr) << _IOC_NRSHIFT) | \ - ((size) << _IOC_SIZESHIFT)) - -#define _IO(type,nr) _IOC(_IOC_NONE,(type),(nr),0) -#define _IOR(type,nr,size) _IOC(_IOC_READ,(type),(nr),sizeof(size)) -#define _IOW(type,nr,size) _IOC(_IOC_WRITE,(type),(nr),sizeof(size)) -#define _IOWR(type,nr,size) _IOC(_IOC_READ|_IOC_WRITE,(type),(nr),sizeof(size)) - -/* Used to decode ioctl numbers in drivers despite the leading underscore... */ -#define _IOC_DIR(nr) \ - ( (((((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK) & (_IOC_WRITE|_IOC_READ)) != 0)? \ - (((nr) >> _IOC_DIRSHIFT) & (_IOC_WRITE|_IOC_READ)): \ - (((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK) ) -#define _IOC_TYPE(nr) (((nr) >> _IOC_TYPESHIFT) & _IOC_TYPEMASK) -#define _IOC_NR(nr) (((nr) >> _IOC_NRSHIFT) & _IOC_NRMASK) -#define _IOC_SIZE(nr) \ - ((((((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK) & (_IOC_WRITE|_IOC_READ)) == 0)? \ - 0: (((nr) >> _IOC_SIZESHIFT) & _IOC_XSIZEMASK)) - -/* ...and for the PCMCIA and sound. */ -#define IOC_IN (_IOC_WRITE << _IOC_DIRSHIFT) -#define IOC_OUT (_IOC_READ << _IOC_DIRSHIFT) -#define IOC_INOUT ((_IOC_WRITE|_IOC_READ) << _IOC_DIRSHIFT) -#define IOCSIZE_MASK (_IOC_XSIZEMASK << _IOC_SIZESHIFT) -#define IOCSIZE_SHIFT (_IOC_SIZESHIFT) - -#endif /* !(_SPARC_IOCTL_H) */ diff --git a/include/asm-sparc/ioctls.h b/include/asm-sparc/ioctls.h deleted file mode 100644 index 3f4d0087b6a3..000000000000 --- a/include/asm-sparc/ioctls.h +++ /dev/null @@ -1,136 +0,0 @@ -#ifndef _ASM_SPARC_IOCTLS_H -#define _ASM_SPARC_IOCTLS_H - -#include <asm/ioctl.h> - -/* Big T */ -#define TCGETA _IOR('T', 1, struct termio) -#define TCSETA _IOW('T', 2, struct termio) -#define TCSETAW _IOW('T', 3, struct termio) -#define TCSETAF _IOW('T', 4, struct termio) -#define TCSBRK _IO('T', 5) -#define TCXONC _IO('T', 6) -#define TCFLSH _IO('T', 7) -#define TCGETS _IOR('T', 8, struct termios) -#define TCSETS _IOW('T', 9, struct termios) -#define TCSETSW _IOW('T', 10, struct termios) -#define TCSETSF _IOW('T', 11, struct termios) -#define TCGETS2 _IOR('T', 12, struct termios2) -#define TCSETS2 _IOW('T', 13, struct termios2) -#define TCSETSW2 _IOW('T', 14, struct termios2) -#define TCSETSF2 _IOW('T', 15, struct termios2) - -/* Note that all the ioctls that are not available in Linux have a - * double underscore on the front to: a) avoid some programs to - * thing we support some ioctls under Linux (autoconfiguration stuff) - */ -/* Little t */ -#define TIOCGETD _IOR('t', 0, int) -#define TIOCSETD _IOW('t', 1, int) -#define __TIOCHPCL _IO('t', 2) /* SunOS Specific */ -#define __TIOCMODG _IOR('t', 3, int) /* SunOS Specific */ -#define __TIOCMODS _IOW('t', 4, int) /* SunOS Specific */ -#define __TIOCGETP _IOR('t', 8, struct sgttyb) /* SunOS Specific */ -#define __TIOCSETP _IOW('t', 9, struct sgttyb) /* SunOS Specific */ -#define __TIOCSETN _IOW('t', 10, struct sgttyb) /* SunOS Specific */ -#define TIOCEXCL _IO('t', 13) -#define TIOCNXCL _IO('t', 14) -#define __TIOCFLUSH _IOW('t', 16, int) /* SunOS Specific */ -#define __TIOCSETC _IOW('t', 17, struct tchars) /* SunOS Specific */ -#define __TIOCGETC _IOR('t', 18, struct tchars) /* SunOS Specific */ -#define __TIOCTCNTL _IOW('t', 32, int) /* SunOS Specific */ -#define __TIOCSIGNAL _IOW('t', 33, int) /* SunOS Specific */ -#define __TIOCSETX _IOW('t', 34, int) /* SunOS Specific */ -#define __TIOCGETX _IOR('t', 35, int) /* SunOS Specific */ -#define TIOCCONS _IO('t', 36) -#define TIOCGSOFTCAR _IOR('t', 100, int) -#define TIOCSSOFTCAR _IOW('t', 101, int) -#define __TIOCUCNTL _IOW('t', 102, int) /* SunOS Specific */ -#define TIOCSWINSZ _IOW('t', 103, struct winsize) -#define TIOCGWINSZ _IOR('t', 104, struct winsize) -#define __TIOCREMOTE _IOW('t', 105, int) /* SunOS Specific */ -#define TIOCMGET _IOR('t', 106, int) -#define TIOCMBIC _IOW('t', 107, int) -#define TIOCMBIS _IOW('t', 108, int) -#define TIOCMSET _IOW('t', 109, int) -#define TIOCSTART _IO('t', 110) -#define TIOCSTOP _IO('t', 111) -#define TIOCPKT _IOW('t', 112, int) -#define TIOCNOTTY _IO('t', 113) -#define TIOCSTI _IOW('t', 114, char) -#define TIOCOUTQ _IOR('t', 115, int) -#define __TIOCGLTC _IOR('t', 116, struct ltchars) /* SunOS Specific */ -#define __TIOCSLTC _IOW('t', 117, struct ltchars) /* SunOS Specific */ -/* 118 is the non-posix setpgrp tty ioctl */ -/* 119 is the non-posix getpgrp tty ioctl */ -#define __TIOCCDTR _IO('t', 120) /* SunOS Specific */ -#define __TIOCSDTR _IO('t', 121) /* SunOS Specific */ -#define TIOCCBRK _IO('t', 122) -#define TIOCSBRK _IO('t', 123) -#define __TIOCLGET _IOW('t', 124, int) /* SunOS Specific */ -#define __TIOCLSET _IOW('t', 125, int) /* SunOS Specific */ -#define __TIOCLBIC _IOW('t', 126, int) /* SunOS Specific */ -#define __TIOCLBIS _IOW('t', 127, int) /* SunOS Specific */ -#define __TIOCISPACE _IOR('t', 128, int) /* SunOS Specific */ -#define __TIOCISIZE _IOR('t', 129, int) /* SunOS Specific */ -#define TIOCSPGRP _IOW('t', 130, int) -#define TIOCGPGRP _IOR('t', 131, int) -#define TIOCSCTTY _IO('t', 132) -#define TIOCGSID _IOR('t', 133, int) -/* Get minor device of a pty master's FD -- Solaris equiv is ISPTM */ -#define TIOCGPTN _IOR('t', 134, unsigned int) /* Get Pty Number */ -#define TIOCSPTLCK _IOW('t', 135, int) /* Lock/unlock PTY */ - -/* Little f */ -#define FIOCLEX _IO('f', 1) -#define FIONCLEX _IO('f', 2) -#define FIOASYNC _IOW('f', 125, int) -#define FIONBIO _IOW('f', 126, int) -#define FIONREAD _IOR('f', 127, int) -#define TIOCINQ FIONREAD -#define FIOQSIZE _IOR('f', 128, loff_t) - -/* SCARY Rutgers local SunOS kernel hackery, perhaps I will support it - * someday. This is completely bogus, I know... - */ -#define __TCGETSTAT _IO('T', 200) /* Rutgers specific */ -#define __TCSETSTAT _IO('T', 201) /* Rutgers specific */ - -/* Linux specific, no SunOS equivalent. */ -#define TIOCLINUX 0x541C -#define TIOCGSERIAL 0x541E -#define TIOCSSERIAL 0x541F -#define TCSBRKP 0x5425 -#define TIOCSERCONFIG 0x5453 -#define TIOCSERGWILD 0x5454 -#define TIOCSERSWILD 0x5455 -#define TIOCGLCKTRMIOS 0x5456 -#define TIOCSLCKTRMIOS 0x5457 -#define TIOCSERGSTRUCT 0x5458 /* For debugging only */ -#define TIOCSERGETLSR 0x5459 /* Get line status register */ -#define TIOCSERGETMULTI 0x545A /* Get multiport config */ -#define TIOCSERSETMULTI 0x545B /* Set multiport config */ -#define TIOCMIWAIT 0x545C /* Wait input */ -#define TIOCGICOUNT 0x545D /* Read serial port inline interrupt counts */ - -/* Kernel definitions */ -#ifdef __KERNEL__ -#define TIOCGETC __TIOCGETC -#define TIOCGETP __TIOCGETP -#define TIOCGLTC __TIOCGLTC -#define TIOCSLTC __TIOCSLTC -#define TIOCSETP __TIOCSETP -#define TIOCSETN __TIOCSETN -#define TIOCSETC __TIOCSETC -#endif - -/* Used for packet mode */ -#define TIOCPKT_DATA 0 -#define TIOCPKT_FLUSHREAD 1 -#define TIOCPKT_FLUSHWRITE 2 -#define TIOCPKT_STOP 4 -#define TIOCPKT_START 8 -#define TIOCPKT_NOSTOP 16 -#define TIOCPKT_DOSTOP 32 - -#endif /* !(_ASM_SPARC_IOCTLS_H) */ diff --git a/include/asm-sparc/iommu.h b/include/asm-sparc/iommu.h deleted file mode 100644 index 70c589c05a10..000000000000 --- a/include/asm-sparc/iommu.h +++ /dev/null @@ -1,121 +0,0 @@ -/* iommu.h: Definitions for the sun4m IOMMU. - * - * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu) - */ -#ifndef _SPARC_IOMMU_H -#define _SPARC_IOMMU_H - -#include <asm/page.h> -#include <asm/bitext.h> - -/* The iommu handles all virtual to physical address translations - * that occur between the SBUS and physical memory. Access by - * the cpu to IO registers and similar go over the mbus so are - * translated by the on chip SRMMU. The iommu and the srmmu do - * not need to have the same translations at all, in fact most - * of the time the translations they handle are a disjunct set. - * Basically the iommu handles all dvma sbus activity. - */ - -/* The IOMMU registers occupy three pages in IO space. */ -struct iommu_regs { - /* First page */ - volatile unsigned long control; /* IOMMU control */ - volatile unsigned long base; /* Physical base of iopte page table */ - volatile unsigned long _unused1[3]; - volatile unsigned long tlbflush; /* write only */ - volatile unsigned long pageflush; /* write only */ - volatile unsigned long _unused2[1017]; - /* Second page */ - volatile unsigned long afsr; /* Async-fault status register */ - volatile unsigned long afar; /* Async-fault physical address */ - volatile unsigned long _unused3[2]; - volatile unsigned long sbuscfg0; /* SBUS configuration registers, per-slot */ - volatile unsigned long sbuscfg1; - volatile unsigned long sbuscfg2; - volatile unsigned long sbuscfg3; - volatile unsigned long mfsr; /* Memory-fault status register */ - volatile unsigned long mfar; /* Memory-fault physical address */ - volatile unsigned long _unused4[1014]; - /* Third page */ - volatile unsigned long mid; /* IOMMU module-id */ -}; - -#define IOMMU_CTRL_IMPL 0xf0000000 /* Implementation */ -#define IOMMU_CTRL_VERS 0x0f000000 /* Version */ -#define IOMMU_CTRL_RNGE 0x0000001c /* Mapping RANGE */ -#define IOMMU_RNGE_16MB 0x00000000 /* 0xff000000 -> 0xffffffff */ -#define IOMMU_RNGE_32MB 0x00000004 /* 0xfe000000 -> 0xffffffff */ -#define IOMMU_RNGE_64MB 0x00000008 /* 0xfc000000 -> 0xffffffff */ -#define IOMMU_RNGE_128MB 0x0000000c /* 0xf8000000 -> 0xffffffff */ -#define IOMMU_RNGE_256MB 0x00000010 /* 0xf0000000 -> 0xffffffff */ -#define IOMMU_RNGE_512MB 0x00000014 /* 0xe0000000 -> 0xffffffff */ -#define IOMMU_RNGE_1GB 0x00000018 /* 0xc0000000 -> 0xffffffff */ -#define IOMMU_RNGE_2GB 0x0000001c /* 0x80000000 -> 0xffffffff */ -#define IOMMU_CTRL_ENAB 0x00000001 /* IOMMU Enable */ - -#define IOMMU_AFSR_ERR 0x80000000 /* LE, TO, or BE asserted */ -#define IOMMU_AFSR_LE 0x40000000 /* SBUS reports error after transaction */ -#define IOMMU_AFSR_TO 0x20000000 /* Write access took more than 12.8 us. */ -#define IOMMU_AFSR_BE 0x10000000 /* Write access received error acknowledge */ -#define IOMMU_AFSR_SIZE 0x0e000000 /* Size of transaction causing error */ -#define IOMMU_AFSR_S 0x01000000 /* Sparc was in supervisor mode */ -#define IOMMU_AFSR_RESV 0x00f00000 /* Reserver, forced to 0x8 by hardware */ -#define IOMMU_AFSR_ME 0x00080000 /* Multiple errors occurred */ -#define IOMMU_AFSR_RD 0x00040000 /* A read operation was in progress */ -#define IOMMU_AFSR_FAV 0x00020000 /* IOMMU afar has valid contents */ - -#define IOMMU_SBCFG_SAB30 0x00010000 /* Phys-address bit 30 when bypass enabled */ -#define IOMMU_SBCFG_BA16 0x00000004 /* Slave supports 16 byte bursts */ -#define IOMMU_SBCFG_BA8 0x00000002 /* Slave supports 8 byte bursts */ -#define IOMMU_SBCFG_BYPASS 0x00000001 /* Bypass IOMMU, treat all addresses - produced by this device as pure - physical. */ - -#define IOMMU_MFSR_ERR 0x80000000 /* One or more of PERR1 or PERR0 */ -#define IOMMU_MFSR_S 0x01000000 /* Sparc was in supervisor mode */ -#define IOMMU_MFSR_CPU 0x00800000 /* CPU transaction caused parity error */ -#define IOMMU_MFSR_ME 0x00080000 /* Multiple parity errors occurred */ -#define IOMMU_MFSR_PERR 0x00006000 /* high bit indicates parity error occurred - on the even word of the access, low bit - indicated odd word caused the parity error */ -#define IOMMU_MFSR_BM 0x00001000 /* Error occurred while in boot mode */ -#define IOMMU_MFSR_C 0x00000800 /* Address causing error was marked cacheable */ -#define IOMMU_MFSR_RTYP 0x000000f0 /* Memory request transaction type */ - -#define IOMMU_MID_SBAE 0x001f0000 /* SBus arbitration enable */ -#define IOMMU_MID_SE 0x00100000 /* Enables SCSI/ETHERNET arbitration */ -#define IOMMU_MID_SB3 0x00080000 /* Enable SBUS device 3 arbitration */ -#define IOMMU_MID_SB2 0x00040000 /* Enable SBUS device 2 arbitration */ -#define IOMMU_MID_SB1 0x00020000 /* Enable SBUS device 1 arbitration */ -#define IOMMU_MID_SB0 0x00010000 /* Enable SBUS device 0 arbitration */ -#define IOMMU_MID_MID 0x0000000f /* Module-id, hardcoded to 0x8 */ - -/* The format of an iopte in the page tables */ -#define IOPTE_PAGE 0x07ffff00 /* Physical page number (PA[30:12]) */ -#define IOPTE_CACHE 0x00000080 /* Cached (in vme IOCACHE or Viking/MXCC) */ -#define IOPTE_WRITE 0x00000004 /* Writeable */ -#define IOPTE_VALID 0x00000002 /* IOPTE is valid */ -#define IOPTE_WAZ 0x00000001 /* Write as zeros */ - -struct iommu_struct { - struct iommu_regs *regs; - iopte_t *page_table; - /* For convenience */ - unsigned long start; /* First managed virtual address */ - unsigned long end; /* Last managed virtual address */ - - struct bit_map usemap; -}; - -static inline void iommu_invalidate(struct iommu_regs *regs) -{ - regs->tlbflush = 0; -} - -static inline void iommu_invalidate_page(struct iommu_regs *regs, unsigned long ba) -{ - regs->pageflush = (ba & PAGE_MASK); -} - -#endif /* !(_SPARC_IOMMU_H) */ diff --git a/include/asm-sparc/ipcbuf.h b/include/asm-sparc/ipcbuf.h deleted file mode 100644 index 9bef02d04e4b..000000000000 --- a/include/asm-sparc/ipcbuf.h +++ /dev/null @@ -1,31 +0,0 @@ -#ifndef _SPARC_IPCBUF_H -#define _SPARC_IPCBUF_H - -/* - * The ipc64_perm structure for sparc architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 32-bit mode - * - 32-bit seq - * - 2 miscellaneous 64-bit values (so that this structure matches - * sparc64 ipc64_perm) - */ - -struct ipc64_perm -{ - __kernel_key_t key; - __kernel_uid32_t uid; - __kernel_gid32_t gid; - __kernel_uid32_t cuid; - __kernel_gid32_t cgid; - unsigned short __pad1; - __kernel_mode_t mode; - unsigned short __pad2; - unsigned short seq; - unsigned long long __unused1; - unsigned long long __unused2; -}; - -#endif /* _SPARC_IPCBUF_H */ diff --git a/include/asm-sparc/irq.h b/include/asm-sparc/irq.h deleted file mode 100644 index fe205cc444b8..000000000000 --- a/include/asm-sparc/irq.h +++ /dev/null @@ -1,15 +0,0 @@ -/* irq.h: IRQ registers on the Sparc. - * - * Copyright (C) 1995, 2007 David S. Miller (davem@davemloft.net) - */ - -#ifndef _SPARC_IRQ_H -#define _SPARC_IRQ_H - -#include <linux/interrupt.h> - -#define NR_IRQS 16 - -#define irq_canonicalize(irq) (irq) - -#endif diff --git a/include/asm-sparc/irq_regs.h b/include/asm-sparc/irq_regs.h deleted file mode 100644 index 3dd9c0b70270..000000000000 --- a/include/asm-sparc/irq_regs.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/irq_regs.h> diff --git a/include/asm-sparc/irqflags.h b/include/asm-sparc/irqflags.h deleted file mode 100644 index db398fb32826..000000000000 --- a/include/asm-sparc/irqflags.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * include/asm-sparc/irqflags.h - * - * IRQ flags handling - * - * This file gets included from lowlevel asm headers too, to provide - * wrapped versions of the local_irq_*() APIs, based on the - * raw_local_irq_*() functions from the lowlevel headers. - */ -#ifndef _ASM_IRQFLAGS_H -#define _ASM_IRQFLAGS_H - -#ifndef __ASSEMBLY__ - -extern void raw_local_irq_restore(unsigned long); -extern unsigned long __raw_local_irq_save(void); -extern void raw_local_irq_enable(void); - -static inline unsigned long getipl(void) -{ - unsigned long retval; - - __asm__ __volatile__("rd %%psr, %0" : "=r" (retval)); - return retval; -} - -#define raw_local_save_flags(flags) ((flags) = getipl()) -#define raw_local_irq_save(flags) ((flags) = __raw_local_irq_save()) -#define raw_local_irq_disable() ((void) __raw_local_irq_save()) -#define raw_irqs_disabled() ((getipl() & PSR_PIL) != 0) - -static inline int raw_irqs_disabled_flags(unsigned long flags) -{ - return ((flags & PSR_PIL) != 0); -} - -#endif /* (__ASSEMBLY__) */ - -#endif /* !(_ASM_IRQFLAGS_H) */ diff --git a/include/asm-sparc/jsflash.h b/include/asm-sparc/jsflash.h deleted file mode 100644 index 3457f29bd73b..000000000000 --- a/include/asm-sparc/jsflash.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * jsflash.h: OS Flash SIMM support for JavaStations. - * - * Copyright (C) 1999 Pete Zaitcev - */ - -#ifndef _SPARC_JSFLASH_H -#define _SPARC_JSFLASH_H - -#ifndef _SPARC_TYPES_H -#include <asm/types.h> -#endif - -/* - * Semantics of the offset is a full address. - * Hardcode it or get it from probe ioctl. - * - * We use full bus address, so that we would be - * automatically compatible with possible future systems. - */ - -#define JSFLASH_IDENT (('F'<<8)|54) -struct jsflash_ident_arg { - __u64 off; /* 0x20000000 is included */ - __u32 size; - char name[32]; /* With trailing zero */ -}; - -#define JSFLASH_ERASE (('F'<<8)|55) -/* Put 0 as argument, may be flags or sector number... */ - -#define JSFLASH_PROGRAM (('F'<<8)|56) -struct jsflash_program_arg { - __u64 data; /* char* for sparc and sparc64 */ - __u64 off; - __u32 size; -}; - -#endif /* _SPARC_JSFLASH_H */ diff --git a/include/asm-sparc/kdebug.h b/include/asm-sparc/kdebug.h deleted file mode 100644 index f69fe7d84b3c..000000000000 --- a/include/asm-sparc/kdebug.h +++ /dev/null @@ -1,73 +0,0 @@ -/* - * kdebug.h: Defines and definitions for debugging the Linux kernel - * under various kernel debuggers. - * - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - */ -#ifndef _SPARC_KDEBUG_H -#define _SPARC_KDEBUG_H - -#include <asm/openprom.h> -#include <asm/vaddrs.h> - -/* Breakpoints are enter through trap table entry 126. So in sparc assembly - * if you want to drop into the debugger you do: - * - * t DEBUG_BP_TRAP - */ - -#define DEBUG_BP_TRAP 126 - -#ifndef __ASSEMBLY__ -/* The debug vector is passed in %o1 at boot time. It is a pointer to - * a structure in the debuggers address space. Here is its format. - */ - -typedef unsigned int (*debugger_funct)(void); - -struct kernel_debug { - /* First the entry point into the debugger. You jump here - * to give control over to the debugger. - */ - unsigned long kdebug_entry; - unsigned long kdebug_trapme; /* Figure out later... */ - /* The following is the number of pages that the debugger has - * taken from to total pool. - */ - unsigned long *kdebug_stolen_pages; - /* Ok, after you remap yourself and/or change the trap table - * from what you were left with at boot time you have to call - * this synchronization function so the debugger can check out - * what you have done. - */ - debugger_funct teach_debugger; -}; /* I think that is it... */ - -extern struct kernel_debug *linux_dbvec; - -/* Use this macro in C-code to enter the debugger. */ -static inline void sp_enter_debugger(void) -{ - __asm__ __volatile__("jmpl %0, %%o7\n\t" - "nop\n\t" : : - "r" (linux_dbvec) : "o7", "memory"); -} - -#define SP_ENTER_DEBUGGER do { \ - if((linux_dbvec!=0) && ((*(short *)linux_dbvec)!=-1)) \ - sp_enter_debugger(); \ - } while(0) - -enum die_val { - DIE_UNUSED, -}; - -#endif /* !(__ASSEMBLY__) */ - -/* Some nice offset defines for assembler code. */ -#define KDEBUG_ENTRY_OFF 0x0 -#define KDEBUG_DUNNO_OFF 0x4 -#define KDEBUG_DUNNO2_OFF 0x8 -#define KDEBUG_TEACH_OFF 0xc - -#endif /* !(_SPARC_KDEBUG_H) */ diff --git a/include/asm-sparc/kgdb.h b/include/asm-sparc/kgdb.h deleted file mode 100644 index b6ef301d05bf..000000000000 --- a/include/asm-sparc/kgdb.h +++ /dev/null @@ -1,38 +0,0 @@ -#ifndef _SPARC_KGDB_H -#define _SPARC_KGDB_H - -#ifdef CONFIG_SPARC32 -#define BUFMAX 2048 -#else -#define BUFMAX 4096 -#endif - -enum regnames { - GDB_G0, GDB_G1, GDB_G2, GDB_G3, GDB_G4, GDB_G5, GDB_G6, GDB_G7, - GDB_O0, GDB_O1, GDB_O2, GDB_O3, GDB_O4, GDB_O5, GDB_SP, GDB_O7, - GDB_L0, GDB_L1, GDB_L2, GDB_L3, GDB_L4, GDB_L5, GDB_L6, GDB_L7, - GDB_I0, GDB_I1, GDB_I2, GDB_I3, GDB_I4, GDB_I5, GDB_FP, GDB_I7, - GDB_F0, - GDB_F31 = GDB_F0 + 31, -#ifdef CONFIG_SPARC32 - GDB_Y, GDB_PSR, GDB_WIM, GDB_TBR, GDB_PC, GDB_NPC, - GDB_FSR, GDB_CSR, -#else - GDB_F32 = GDB_F0 + 32, - GDB_F62 = GDB_F32 + 15, - GDB_PC, GDB_NPC, GDB_STATE, GDB_FSR, GDB_FPRS, GDB_Y, -#endif -}; - -#ifdef CONFIG_SPARC32 -#define NUMREGBYTES ((GDB_CSR + 1) * 4) -#else -#define NUMREGBYTES ((GDB_Y + 1) * 8) -#endif - -extern void arch_kgdb_breakpoint(void); - -#define BREAK_INSTR_SIZE 4 -#define CACHE_FLUSH_IS_SAFE 1 - -#endif /* _SPARC_KGDB_H */ diff --git a/include/asm-sparc/kmap_types.h b/include/asm-sparc/kmap_types.h deleted file mode 100644 index e215f7104974..000000000000 --- a/include/asm-sparc/kmap_types.h +++ /dev/null @@ -1,21 +0,0 @@ -#ifndef _ASM_KMAP_TYPES_H -#define _ASM_KMAP_TYPES_H - -enum km_type { - KM_BOUNCE_READ, - KM_SKB_SUNRPC_DATA, - KM_SKB_DATA_SOFTIRQ, - KM_USER0, - KM_USER1, - KM_BIO_SRC_IRQ, - KM_BIO_DST_IRQ, - KM_PTE0, - KM_PTE1, - KM_IRQ0, - KM_IRQ1, - KM_SOFTIRQ0, - KM_SOFTIRQ1, - KM_TYPE_NR -}; - -#endif diff --git a/include/asm-sparc/kvm.h b/include/asm-sparc/kvm.h deleted file mode 100644 index 2e5478da3819..000000000000 --- a/include/asm-sparc/kvm.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __LINUX_KVM_SPARC_H -#define __LINUX_KVM_SPARC_H - -/* sparc does not support KVM */ - -#endif diff --git a/include/asm-sparc/linkage.h b/include/asm-sparc/linkage.h deleted file mode 100644 index 291c2d01c44f..000000000000 --- a/include/asm-sparc/linkage.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_LINKAGE_H -#define __ASM_LINKAGE_H - -/* Nothing to see here... */ - -#endif diff --git a/include/asm-sparc/local.h b/include/asm-sparc/local.h deleted file mode 100644 index bc80815a435c..000000000000 --- a/include/asm-sparc/local.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _SPARC_LOCAL_H -#define _SPARC_LOCAL_H - -#include <asm-generic/local.h> - -#endif diff --git a/include/asm-sparc/machines.h b/include/asm-sparc/machines.h deleted file mode 100644 index d6c6bf836206..000000000000 --- a/include/asm-sparc/machines.h +++ /dev/null @@ -1,69 +0,0 @@ -/* - * machines.h: Defines for taking apart the machine type value in the - * idprom and determining the kind of machine we are on. - * - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - */ -#ifndef _SPARC_MACHINES_H -#define _SPARC_MACHINES_H - -struct Sun_Machine_Models { - char *name; - unsigned char id_machtype; -}; - -/* Current number of machines we know about that has an IDPROM - * machtype entry including one entry for the 0x80 OBP machines. - */ -#define NUM_SUN_MACHINES 15 - -extern struct Sun_Machine_Models Sun_Machines[NUM_SUN_MACHINES]; - -/* The machine type in the idprom area looks like this: - * - * --------------- - * | ARCH | MACH | - * --------------- - * 7 4 3 0 - * - * The ARCH field determines the architecture line (sun4, sun4c, etc). - * The MACH field determines the machine make within that architecture. - */ - -#define SM_ARCH_MASK 0xf0 -#define SM_SUN4 0x20 -#define SM_SUN4C 0x50 -#define SM_SUN4M 0x70 -#define SM_SUN4M_OBP 0x80 - -#define SM_TYP_MASK 0x0f -/* Sun4 machines */ -#define SM_4_260 0x01 /* Sun 4/200 series */ -#define SM_4_110 0x02 /* Sun 4/100 series */ -#define SM_4_330 0x03 /* Sun 4/300 series */ -#define SM_4_470 0x04 /* Sun 4/400 series */ - -/* Sun4c machines Full Name - PROM NAME */ -#define SM_4C_SS1 0x01 /* Sun4c SparcStation 1 - Sun 4/60 */ -#define SM_4C_IPC 0x02 /* Sun4c SparcStation IPC - Sun 4/40 */ -#define SM_4C_SS1PLUS 0x03 /* Sun4c SparcStation 1+ - Sun 4/65 */ -#define SM_4C_SLC 0x04 /* Sun4c SparcStation SLC - Sun 4/20 */ -#define SM_4C_SS2 0x05 /* Sun4c SparcStation 2 - Sun 4/75 */ -#define SM_4C_ELC 0x06 /* Sun4c SparcStation ELC - Sun 4/25 */ -#define SM_4C_IPX 0x07 /* Sun4c SparcStation IPX - Sun 4/50 */ - -/* Sun4m machines, these predate the OpenBoot. These values only mean - * something if the value in the ARCH field is SM_SUN4M, if it is - * SM_SUN4M_OBP then you have the following situation: - * 1) You either have a sun4d, a sun4e, or a recently made sun4m. - * 2) You have to consult OpenBoot to determine which machine this is. - */ -#define SM_4M_SS60 0x01 /* Sun4m SparcSystem 600 */ -#define SM_4M_SS50 0x02 /* Sun4m SparcStation 10 */ -#define SM_4M_SS40 0x03 /* Sun4m SparcStation 5 */ - -/* Sun4d machines -- N/A */ -/* Sun4e machines -- N/A */ -/* Sun4u machines -- N/A */ - -#endif /* !(_SPARC_MACHINES_H) */ diff --git a/include/asm-sparc/mbus.h b/include/asm-sparc/mbus.h deleted file mode 100644 index bb5ae614b166..000000000000 --- a/include/asm-sparc/mbus.h +++ /dev/null @@ -1,102 +0,0 @@ -/* - * mbus.h: Various defines for MBUS modules. - * - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - */ - -#ifndef _SPARC_MBUS_H -#define _SPARC_MBUS_H - -#include <asm/ross.h> /* HyperSparc stuff */ -#include <asm/cypress.h> /* Cypress Chips */ -#include <asm/viking.h> /* Ugh, bug city... */ - -enum mbus_module { - HyperSparc = 0, - Cypress = 1, - Cypress_vE = 2, - Cypress_vD = 3, - Swift_ok = 4, - Swift_bad_c = 5, - Swift_lots_o_bugs = 6, - Tsunami = 7, - Viking_12 = 8, - Viking_2x = 9, - Viking_30 = 10, - Viking_35 = 11, - Viking_new = 12, - TurboSparc = 13, - SRMMU_INVAL_MOD = 14, -}; - -extern enum mbus_module srmmu_modtype; -extern unsigned int viking_rev, swift_rev, cypress_rev; - -/* HW Mbus module bugs we have to deal with */ -#define HWBUG_COPYBACK_BROKEN 0x00000001 -#define HWBUG_ASIFLUSH_BROKEN 0x00000002 -#define HWBUG_VACFLUSH_BITROT 0x00000004 -#define HWBUG_KERN_ACCBROKEN 0x00000008 -#define HWBUG_KERN_CBITBROKEN 0x00000010 -#define HWBUG_MODIFIED_BITROT 0x00000020 -#define HWBUG_PC_BADFAULT_ADDR 0x00000040 -#define HWBUG_SUPERSCALAR_BAD 0x00000080 -#define HWBUG_PACINIT_BITROT 0x00000100 - -extern unsigned int hwbug_bitmask; - -/* First the module type values. To find out which you have, just load - * the mmu control register from ASI_M_MMUREG alternate address space and - * shift the value right 28 bits. - */ -/* IMPL field means the company which produced the chip. */ -#define MBUS_VIKING 0x4 /* bleech, Texas Instruments Module */ -#define MBUS_LSI 0x3 /* LSI Logics */ -#define MBUS_ROSS 0x1 /* Ross is nice */ -#define MBUS_FMI 0x0 /* Fujitsu Microelectronics/Swift */ - -/* Ross Module versions */ -#define ROSS_604_REV_CDE 0x0 /* revisions c, d, and e */ -#define ROSS_604_REV_F 0x1 /* revision f */ -#define ROSS_605 0xf /* revision a, a.1, and a.2 */ -#define ROSS_605_REV_B 0xe /* revision b */ - -/* TI Viking Module versions */ -#define VIKING_REV_12 0x1 /* Version 1.2 or SPARCclassic's CPU */ -#define VIKING_REV_2 0x2 /* Version 2.1, 2.2, 2.3, and 2.4 */ -#define VIKING_REV_30 0x3 /* Version 3.0 */ -#define VIKING_REV_35 0x4 /* Version 3.5 */ - -/* LSI Logics. */ -#define LSI_L64815 0x0 - -/* Fujitsu */ -#define FMI_AURORA 0x4 /* MB8690x, a Swift module... */ -#define FMI_TURBO 0x5 /* MB86907, a TurboSparc module... */ - -/* For multiprocessor support we need to be able to obtain the CPU id and - * the MBUS Module id. - */ - -/* The CPU ID is encoded in the trap base register, 20 bits to the left of - * bit zero, with 2 bits being significant. - */ -#define TBR_ID_SHIFT 20 - -static inline int get_cpuid(void) -{ - register int retval; - __asm__ __volatile__("rd %%tbr, %0\n\t" - "srl %0, %1, %0\n\t" : - "=r" (retval) : - "i" (TBR_ID_SHIFT)); - return (retval & 3); -} - -static inline int get_modid(void) -{ - return (get_cpuid() | 0x8); -} - - -#endif /* !(_SPARC_MBUS_H) */ diff --git a/include/asm-sparc/mc146818rtc.h b/include/asm-sparc/mc146818rtc.h deleted file mode 100644 index fa7eac926582..000000000000 --- a/include/asm-sparc/mc146818rtc.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * Machine dependent access functions for RTC registers. - */ -#ifndef __ASM_SPARC_MC146818RTC_H -#define __ASM_SPARC_MC146818RTC_H - -#include <asm/io.h> - -#ifndef RTC_PORT -#define RTC_PORT(x) (0x70 + (x)) -#define RTC_ALWAYS_BCD 1 /* RTC operates in binary mode */ -#endif - -/* - * The yet supported machines all access the RTC index register via - * an ISA port access but the way to access the date register differs ... - */ -#define CMOS_READ(addr) ({ \ -outb_p((addr),RTC_PORT(0)); \ -inb_p(RTC_PORT(1)); \ -}) -#define CMOS_WRITE(val, addr) ({ \ -outb_p((addr),RTC_PORT(0)); \ -outb_p((val),RTC_PORT(1)); \ -}) - -#define RTC_IRQ 8 - -#endif /* __ASM_SPARC_MC146818RTC_H */ diff --git a/include/asm-sparc/memreg.h b/include/asm-sparc/memreg.h deleted file mode 100644 index 845ad2b39183..000000000000 --- a/include/asm-sparc/memreg.h +++ /dev/null @@ -1,51 +0,0 @@ -#ifndef _SPARC_MEMREG_H -#define _SPARC_MEMREG_H -/* memreg.h: Definitions of the values found in the synchronous - * and asynchronous memory error registers when a fault - * occurs on the sun4c. - * - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - */ - -/* First the synchronous error codes, these are usually just - * normal page faults. - */ - -#define SUN4C_SYNC_WDRESET 0x0001 /* watchdog reset */ -#define SUN4C_SYNC_SIZE 0x0002 /* bad access size? whuz this? */ -#define SUN4C_SYNC_PARITY 0x0008 /* bad ram chips caused a parity error */ -#define SUN4C_SYNC_SBUS 0x0010 /* the SBUS had some problems... */ -#define SUN4C_SYNC_NOMEM 0x0020 /* translation to non-existent ram */ -#define SUN4C_SYNC_PROT 0x0040 /* access violated pte protections */ -#define SUN4C_SYNC_NPRESENT 0x0080 /* pte said that page was not present */ -#define SUN4C_SYNC_BADWRITE 0x8000 /* while writing something went bogus */ - -#define SUN4C_SYNC_BOLIXED \ - (SUN4C_SYNC_WDRESET | SUN4C_SYNC_SIZE | SUN4C_SYNC_SBUS | \ - SUN4C_SYNC_NOMEM | SUN4C_SYNC_PARITY) - -/* Now the asynchronous error codes, these are almost always produced - * by the cache writing things back to memory and getting a bad translation. - * Bad DVMA transactions can cause these faults too. - */ - -#define SUN4C_ASYNC_BADDVMA 0x0010 /* error during DVMA access */ -#define SUN4C_ASYNC_NOMEM 0x0020 /* write back pointed to bad phys addr */ -#define SUN4C_ASYNC_BADWB 0x0080 /* write back points to non-present page */ - -/* Memory parity error register with associated bit constants. */ -#ifndef __ASSEMBLY__ -extern __volatile__ unsigned long __iomem *sun4c_memerr_reg; -#endif - -#define SUN4C_MPE_ERROR 0x80 /* Parity error detected. (ro) */ -#define SUN4C_MPE_MULTI 0x40 /* Multiple parity errors detected. (ro) */ -#define SUN4C_MPE_TEST 0x20 /* Write inverse parity. (rw) */ -#define SUN4C_MPE_CHECK 0x10 /* Enable parity checking. (rw) */ -#define SUN4C_MPE_ERR00 0x08 /* Parity error in bits 0-7. (ro) */ -#define SUN4C_MPE_ERR08 0x04 /* Parity error in bits 8-15. (ro) */ -#define SUN4C_MPE_ERR16 0x02 /* Parity error in bits 16-23. (ro) */ -#define SUN4C_MPE_ERR24 0x01 /* Parity error in bits 24-31. (ro) */ -#define SUN4C_MPE_ERRS 0x0F /* Bit mask for the error bits. (ro) */ - -#endif /* !(_SPARC_MEMREG_H) */ diff --git a/include/asm-sparc/mman.h b/include/asm-sparc/mman.h deleted file mode 100644 index fdfbbf0a4736..000000000000 --- a/include/asm-sparc/mman.h +++ /dev/null @@ -1,31 +0,0 @@ -#ifndef __SPARC_MMAN_H__ -#define __SPARC_MMAN_H__ - -#include <asm-generic/mman.h> - -/* SunOS'ified... */ - -#define MAP_RENAME MAP_ANONYMOUS /* In SunOS terminology */ -#define MAP_NORESERVE 0x40 /* don't reserve swap pages */ -#define MAP_INHERIT 0x80 /* SunOS doesn't do this, but... */ -#define MAP_LOCKED 0x100 /* lock the mapping */ -#define _MAP_NEW 0x80000000 /* Binary compatibility is fun... */ - -#define MAP_GROWSDOWN 0x0200 /* stack-like segment */ -#define MAP_DENYWRITE 0x0800 /* ETXTBSY */ -#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */ - -#define MCL_CURRENT 0x2000 /* lock all currently mapped pages */ -#define MCL_FUTURE 0x4000 /* lock all additions to address space */ - -#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */ -#define MAP_NONBLOCK 0x10000 /* do not block on IO */ - -#ifdef __KERNEL__ -#ifndef __ASSEMBLY__ -#define arch_mmap_check(addr,len,flags) sparc_mmap_check(addr,len) -int sparc_mmap_check(unsigned long addr, unsigned long len); -#endif -#endif - -#endif /* __SPARC_MMAN_H__ */ diff --git a/include/asm-sparc/mmu.h b/include/asm-sparc/mmu.h deleted file mode 100644 index ccd36d26615a..000000000000 --- a/include/asm-sparc/mmu.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __MMU_H -#define __MMU_H - -/* Default "unsigned long" context */ -typedef unsigned long mm_context_t; - -#endif diff --git a/include/asm-sparc/mmu_context.h b/include/asm-sparc/mmu_context.h deleted file mode 100644 index 671a997b9e69..000000000000 --- a/include/asm-sparc/mmu_context.h +++ /dev/null @@ -1,42 +0,0 @@ -#ifndef __SPARC_MMU_CONTEXT_H -#define __SPARC_MMU_CONTEXT_H - -#include <asm/btfixup.h> - -#ifndef __ASSEMBLY__ - -#include <asm-generic/mm_hooks.h> - -static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) -{ -} - -/* - * Initialize a new mmu context. This is invoked when a new - * address space instance (unique or shared) is instantiated. - */ -#define init_new_context(tsk, mm) (((mm)->context = NO_CONTEXT), 0) - -/* - * Destroy a dead context. This occurs when mmput drops the - * mm_users count to zero, the mmaps have been released, and - * all the page tables have been flushed. Our job is to destroy - * any remaining processor-specific state. - */ -BTFIXUPDEF_CALL(void, destroy_context, struct mm_struct *) - -#define destroy_context(mm) BTFIXUP_CALL(destroy_context)(mm) - -/* Switch the current MM context. */ -BTFIXUPDEF_CALL(void, switch_mm, struct mm_struct *, struct mm_struct *, struct task_struct *) - -#define switch_mm(old_mm, mm, tsk) BTFIXUP_CALL(switch_mm)(old_mm, mm, tsk) - -#define deactivate_mm(tsk,mm) do { } while (0) - -/* Activate a new MM instance for the current task. */ -#define activate_mm(active_mm, mm) switch_mm((active_mm), (mm), NULL) - -#endif /* !(__ASSEMBLY__) */ - -#endif /* !(__SPARC_MMU_CONTEXT_H) */ diff --git a/include/asm-sparc/module.h b/include/asm-sparc/module.h deleted file mode 100644 index cbd9e67b0c0b..000000000000 --- a/include/asm-sparc/module.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef _ASM_SPARC_MODULE_H -#define _ASM_SPARC_MODULE_H -struct mod_arch_specific { }; -#define Elf_Shdr Elf32_Shdr -#define Elf_Sym Elf32_Sym -#define Elf_Ehdr Elf32_Ehdr -#endif /* _ASM_SPARC_MODULE_H */ diff --git a/include/asm-sparc/mostek.h b/include/asm-sparc/mostek.h deleted file mode 100644 index 29aad11b8f00..000000000000 --- a/include/asm-sparc/mostek.h +++ /dev/null @@ -1,173 +0,0 @@ -/* - * mostek.h: Describes the various Mostek time of day clock registers. - * - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - * Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu) - * Added intersil code 05/25/98 Chris Davis (cdavis@cois.on.ca) - */ - -#ifndef _SPARC_MOSTEK_H -#define _SPARC_MOSTEK_H - -#include <asm/idprom.h> -#include <asm/io.h> - -/* M48T02 Register Map (adapted from Sun NVRAM/Hostid FAQ) - * - * Data - * Address Function - * Bit 7 Bit 6 Bit 5 Bit 4Bit 3 Bit 2 Bit 1 Bit 0 - * 7ff - - - - - - - - Year 00-99 - * 7fe 0 0 0 - - - - - Month 01-12 - * 7fd 0 0 - - - - - - Date 01-31 - * 7fc 0 FT 0 0 0 - - - Day 01-07 - * 7fb KS 0 - - - - - - Hours 00-23 - * 7fa 0 - - - - - - - Minutes 00-59 - * 7f9 ST - - - - - - - Seconds 00-59 - * 7f8 W R S - - - - - Control - * - * * ST is STOP BIT - * * W is WRITE BIT - * * R is READ BIT - * * S is SIGN BIT - * * FT is FREQ TEST BIT - * * KS is KICK START BIT - */ - -/* The Mostek 48t02 real time clock and NVRAM chip. The registers - * other than the control register are in binary coded decimal. Some - * control bits also live outside the control register. - */ -#define mostek_read(_addr) readb(_addr) -#define mostek_write(_addr,_val) writeb(_val, _addr) -#define MOSTEK_EEPROM 0x0000UL -#define MOSTEK_IDPROM 0x07d8UL -#define MOSTEK_CREG 0x07f8UL -#define MOSTEK_SEC 0x07f9UL -#define MOSTEK_MIN 0x07faUL -#define MOSTEK_HOUR 0x07fbUL -#define MOSTEK_DOW 0x07fcUL -#define MOSTEK_DOM 0x07fdUL -#define MOSTEK_MONTH 0x07feUL -#define MOSTEK_YEAR 0x07ffUL - -struct mostek48t02 { - volatile char eeprom[2008]; /* This is the eeprom, don't touch! */ - struct idprom idprom; /* The idprom lives here. */ - volatile unsigned char creg; /* Control register */ - volatile unsigned char sec; /* Seconds (0-59) */ - volatile unsigned char min; /* Minutes (0-59) */ - volatile unsigned char hour; /* Hour (0-23) */ - volatile unsigned char dow; /* Day of the week (1-7) */ - volatile unsigned char dom; /* Day of the month (1-31) */ - volatile unsigned char month; /* Month of year (1-12) */ - volatile unsigned char year; /* Year (0-99) */ -}; - -extern spinlock_t mostek_lock; -extern void __iomem *mstk48t02_regs; - -/* Control register values. */ -#define MSTK_CREG_WRITE 0x80 /* Must set this before placing values. */ -#define MSTK_CREG_READ 0x40 /* Stop updates to allow a clean read. */ -#define MSTK_CREG_SIGN 0x20 /* Slow/speed clock in calibration mode. */ - -/* Control bits that live in the other registers. */ -#define MSTK_STOP 0x80 /* Stop the clock oscillator. (sec) */ -#define MSTK_KICK_START 0x80 /* Kick start the clock chip. (hour) */ -#define MSTK_FREQ_TEST 0x40 /* Frequency test mode. (day) */ - -#define MSTK_YEAR_ZERO 1968 /* If year reg has zero, it is 1968. */ -#define MSTK_CVT_YEAR(yr) ((yr) + MSTK_YEAR_ZERO) - -/* Masks that define how much space each value takes up. */ -#define MSTK_SEC_MASK 0x7f -#define MSTK_MIN_MASK 0x7f -#define MSTK_HOUR_MASK 0x3f -#define MSTK_DOW_MASK 0x07 -#define MSTK_DOM_MASK 0x3f -#define MSTK_MONTH_MASK 0x1f -#define MSTK_YEAR_MASK 0xffU - -/* Binary coded decimal conversion macros. */ -#define MSTK_REGVAL_TO_DECIMAL(x) (((x) & 0x0F) + 0x0A * ((x) >> 0x04)) -#define MSTK_DECIMAL_TO_REGVAL(x) ((((x) / 0x0A) << 0x04) + ((x) % 0x0A)) - -/* Generic register set and get macros for internal use. */ -#define MSTK_GET(regs,var,mask) (MSTK_REGVAL_TO_DECIMAL(((struct mostek48t02 *)regs)->var & MSTK_ ## mask ## _MASK)) -#define MSTK_SET(regs,var,value,mask) do { ((struct mostek48t02 *)regs)->var &= ~(MSTK_ ## mask ## _MASK); ((struct mostek48t02 *)regs)->var |= MSTK_DECIMAL_TO_REGVAL(value) & (MSTK_ ## mask ## _MASK); } while (0) - -/* Macros to make register access easier on our fingers. These give you - * the decimal value of the register requested if applicable. You pass - * the a pointer to a 'struct mostek48t02'. - */ -#define MSTK_REG_CREG(regs) (((struct mostek48t02 *)regs)->creg) -#define MSTK_REG_SEC(regs) MSTK_GET(regs,sec,SEC) -#define MSTK_REG_MIN(regs) MSTK_GET(regs,min,MIN) -#define MSTK_REG_HOUR(regs) MSTK_GET(regs,hour,HOUR) -#define MSTK_REG_DOW(regs) MSTK_GET(regs,dow,DOW) -#define MSTK_REG_DOM(regs) MSTK_GET(regs,dom,DOM) -#define MSTK_REG_MONTH(regs) MSTK_GET(regs,month,MONTH) -#define MSTK_REG_YEAR(regs) MSTK_GET(regs,year,YEAR) - -#define MSTK_SET_REG_SEC(regs,value) MSTK_SET(regs,sec,value,SEC) -#define MSTK_SET_REG_MIN(regs,value) MSTK_SET(regs,min,value,MIN) -#define MSTK_SET_REG_HOUR(regs,value) MSTK_SET(regs,hour,value,HOUR) -#define MSTK_SET_REG_DOW(regs,value) MSTK_SET(regs,dow,value,DOW) -#define MSTK_SET_REG_DOM(regs,value) MSTK_SET(regs,dom,value,DOM) -#define MSTK_SET_REG_MONTH(regs,value) MSTK_SET(regs,month,value,MONTH) -#define MSTK_SET_REG_YEAR(regs,value) MSTK_SET(regs,year,value,YEAR) - - -/* The Mostek 48t08 clock chip. Found on Sun4m's I think. It has the - * same (basically) layout of the 48t02 chip except for the extra - * NVRAM on board (8 KB against the 48t02's 2 KB). - */ -struct mostek48t08 { - char offset[6*1024]; /* Magic things may be here, who knows? */ - struct mostek48t02 regs; /* Here is what we are interested in. */ -}; - -extern enum sparc_clock_type sp_clock_typ; - -#ifdef CONFIG_SUN4 -enum sparc_clock_type { MSTK48T02, MSTK48T08, \ -INTERSIL, MSTK_INVALID }; -#else -enum sparc_clock_type { MSTK48T02, MSTK48T08, \ -MSTK_INVALID }; -#endif - -#ifdef CONFIG_SUN4 -/* intersil on a sun 4/260 code data from harris doc */ -struct intersil_dt { - volatile unsigned char int_csec; - volatile unsigned char int_hour; - volatile unsigned char int_min; - volatile unsigned char int_sec; - volatile unsigned char int_month; - volatile unsigned char int_day; - volatile unsigned char int_year; - volatile unsigned char int_dow; -}; - -struct intersil { - struct intersil_dt clk; - struct intersil_dt cmp; - volatile unsigned char int_intr_reg; - volatile unsigned char int_cmd_reg; -}; - -#define INTERSIL_STOP 0x0 -#define INTERSIL_START 0x8 -#define INTERSIL_INTR_DISABLE 0x0 -#define INTERSIL_INTR_ENABLE 0x10 -#define INTERSIL_32K 0x0 -#define INTERSIL_NORMAL 0x0 -#define INTERSIL_24H 0x4 -#define INTERSIL_INT_100HZ 0x2 - -/* end of intersil info */ -#endif - -#endif /* !(_SPARC_MOSTEK_H) */ diff --git a/include/asm-sparc/mpmbox.h b/include/asm-sparc/mpmbox.h deleted file mode 100644 index f8423039b242..000000000000 --- a/include/asm-sparc/mpmbox.h +++ /dev/null @@ -1,67 +0,0 @@ -/* - * mpmbox.h: Interface and defines for the OpenProm mailbox - * facilities for MP machines under Linux. - * - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - */ - -#ifndef _SPARC_MPMBOX_H -#define _SPARC_MPMBOX_H - -/* The prom allocates, for each CPU on the machine an unsigned - * byte in physical ram. You probe the device tree prom nodes - * for these values. The purpose of this byte is to be able to - * pass messages from one cpu to another. - */ - -/* These are the main message types we have to look for in our - * Cpu mailboxes, based upon these values we decide what course - * of action to take. - */ - -/* The CPU is executing code in the kernel. */ -#define MAILBOX_ISRUNNING 0xf0 - -/* Another CPU called romvec->pv_exit(), you should call - * prom_stopcpu() when you see this in your mailbox. - */ -#define MAILBOX_EXIT 0xfb - -/* Another CPU called romvec->pv_enter(), you should call - * prom_cpuidle() when this is seen. - */ -#define MAILBOX_GOSPIN 0xfc - -/* Another CPU has hit a breakpoint either into kadb or the prom - * itself. Just like MAILBOX_GOSPIN, you should call prom_cpuidle() - * at this point. - */ -#define MAILBOX_BPT_SPIN 0xfd - -/* Oh geese, some other nitwit got a damn watchdog reset. The party's - * over so go call prom_stopcpu(). - */ -#define MAILBOX_WDOG_STOP 0xfe - -#ifndef __ASSEMBLY__ - -/* Handy macro's to determine a cpu's state. */ - -/* Is the cpu still in Power On Self Test? */ -#define MBOX_POST_P(letter) ((letter) >= 0x00 && (letter) <= 0x7f) - -/* Is the cpu at the 'ok' prompt of the PROM? */ -#define MBOX_PROMPROMPT_P(letter) ((letter) >= 0x80 && (letter) <= 0x8f) - -/* Is the cpu spinning in the PROM? */ -#define MBOX_PROMSPIN_P(letter) ((letter) >= 0x90 && (letter) <= 0xef) - -/* Sanity check... This is junk mail, throw it out. */ -#define MBOX_BOGON_P(letter) ((letter) >= 0xf1 && (letter) <= 0xfa) - -/* Is the cpu actively running an application/kernel-code? */ -#define MBOX_RUNNING_P(letter) ((letter) == MAILBOX_ISRUNNING) - -#endif /* !(__ASSEMBLY__) */ - -#endif /* !(_SPARC_MPMBOX_H) */ diff --git a/include/asm-sparc/msgbuf.h b/include/asm-sparc/msgbuf.h deleted file mode 100644 index 8cec9ad0b825..000000000000 --- a/include/asm-sparc/msgbuf.h +++ /dev/null @@ -1,31 +0,0 @@ -#ifndef _SPARC64_MSGBUF_H -#define _SPARC64_MSGBUF_H - -/* - * The msqid64_ds structure for sparc64 architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct msqid64_ds { - struct ipc64_perm msg_perm; - unsigned int __pad1; - __kernel_time_t msg_stime; /* last msgsnd time */ - unsigned int __pad2; - __kernel_time_t msg_rtime; /* last msgrcv time */ - unsigned int __pad3; - __kernel_time_t msg_ctime; /* last change time */ - unsigned long msg_cbytes; /* current number of bytes on queue */ - unsigned long msg_qnum; /* number of messages in queue */ - unsigned long msg_qbytes; /* max number of bytes on queue */ - __kernel_pid_t msg_lspid; /* pid of last msgsnd */ - __kernel_pid_t msg_lrpid; /* last receive pid */ - unsigned long __unused1; - unsigned long __unused2; -}; - -#endif /* _SPARC64_MSGBUF_H */ diff --git a/include/asm-sparc/msi.h b/include/asm-sparc/msi.h deleted file mode 100644 index 724ca5667052..000000000000 --- a/include/asm-sparc/msi.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * msi.h: Defines specific to the MBus - Sbus - Interface. - * - * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu) - * Copyright (C) 1996 Eddie C. Dost (ecd@skynet.be) - */ - -#ifndef _SPARC_MSI_H -#define _SPARC_MSI_H - -/* - * Locations of MSI Registers. - */ -#define MSI_MBUS_ARBEN 0xe0001008 /* MBus Arbiter Enable register */ - -/* - * Useful bits in the MSI Registers. - */ -#define MSI_ASYNC_MODE 0x80000000 /* Operate the MSI asynchronously */ - - -static inline void msi_set_sync(void) -{ - __asm__ __volatile__ ("lda [%0] %1, %%g3\n\t" - "andn %%g3, %2, %%g3\n\t" - "sta %%g3, [%0] %1\n\t" : : - "r" (MSI_MBUS_ARBEN), - "i" (ASI_M_CTL), "r" (MSI_ASYNC_MODE) : "g3"); -} - -#endif /* !(_SPARC_MSI_H) */ diff --git a/include/asm-sparc/mutex.h b/include/asm-sparc/mutex.h deleted file mode 100644 index 458c1f7fbc18..000000000000 --- a/include/asm-sparc/mutex.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * Pull in the generic implementation for the mutex fastpath. - * - * TODO: implement optimized primitives instead, or leave the generic - * implementation in place, or pick the atomic_xchg() based generic - * implementation. (see asm-generic/mutex-xchg.h for details) - */ - -#include <asm-generic/mutex-dec.h> diff --git a/include/asm-sparc/mxcc.h b/include/asm-sparc/mxcc.h deleted file mode 100644 index c0517bd05bde..000000000000 --- a/include/asm-sparc/mxcc.h +++ /dev/null @@ -1,137 +0,0 @@ -/* - * mxcc.h: Definitions of the Viking MXCC registers - * - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - */ - -#ifndef _SPARC_MXCC_H -#define _SPARC_MXCC_H - -/* These registers are accessed through ASI 0x2. */ -#define MXCC_DATSTREAM 0x1C00000 /* Data stream register */ -#define MXCC_SRCSTREAM 0x1C00100 /* Source stream register */ -#define MXCC_DESSTREAM 0x1C00200 /* Destination stream register */ -#define MXCC_RMCOUNT 0x1C00300 /* Count of references and misses */ -#define MXCC_STEST 0x1C00804 /* Internal self-test */ -#define MXCC_CREG 0x1C00A04 /* Control register */ -#define MXCC_SREG 0x1C00B00 /* Status register */ -#define MXCC_RREG 0x1C00C04 /* Reset register */ -#define MXCC_EREG 0x1C00E00 /* Error code register */ -#define MXCC_PREG 0x1C00F04 /* Address port register */ - -/* Some MXCC constants. */ -#define MXCC_STREAM_SIZE 0x20 /* Size in bytes of one stream r/w */ - -/* The MXCC Control Register: - * - * ---------------------------------------------------------------------- - * | | RRC | RSV |PRE|MCE|PARE|ECE|RSV| - * ---------------------------------------------------------------------- - * 31 10 9 8-6 5 4 3 2 1-0 - * - * RRC: Controls what you read from MXCC_RMCOUNT reg. - * 0=Misses 1=References - * PRE: Prefetch enable - * MCE: Multiple Command Enable - * PARE: Parity enable - * ECE: External cache enable - */ - -#define MXCC_CTL_RRC 0x00000200 -#define MXCC_CTL_PRE 0x00000020 -#define MXCC_CTL_MCE 0x00000010 -#define MXCC_CTL_PARE 0x00000008 -#define MXCC_CTL_ECE 0x00000004 - -/* The MXCC Error Register: - * - * -------------------------------------------------------- - * |ME| RSV|CE|PEW|PEE|ASE|EIV| MOPC|ECODE|PRIV|RSV|HPADDR| - * -------------------------------------------------------- - * 31 30 29 28 27 26 25 24-15 14-7 6 5-3 2-0 - * - * ME: Multiple Errors have occurred - * CE: Cache consistency Error - * PEW: Parity Error during a Write operation - * PEE: Parity Error involving the External cache - * ASE: ASynchronous Error - * EIV: This register is toast - * MOPC: MXCC Operation Code for instance causing error - * ECODE: The Error CODE - * PRIV: A privileged mode error? 0=no 1=yes - * HPADDR: High PhysicalADDRess bits (35-32) - */ - -#define MXCC_ERR_ME 0x80000000 -#define MXCC_ERR_CE 0x20000000 -#define MXCC_ERR_PEW 0x10000000 -#define MXCC_ERR_PEE 0x08000000 -#define MXCC_ERR_ASE 0x04000000 -#define MXCC_ERR_EIV 0x02000000 -#define MXCC_ERR_MOPC 0x01FF8000 -#define MXCC_ERR_ECODE 0x00007F80 -#define MXCC_ERR_PRIV 0x00000040 -#define MXCC_ERR_HPADDR 0x0000000f - -/* The MXCC Port register: - * - * ----------------------------------------------------- - * | | MID | | - * ----------------------------------------------------- - * 31 21 20-18 17 0 - * - * MID: The moduleID of the cpu your read this from. - */ - -#ifndef __ASSEMBLY__ - -static inline void mxcc_set_stream_src(unsigned long *paddr) -{ - unsigned long data0 = paddr[0]; - unsigned long data1 = paddr[1]; - - __asm__ __volatile__ ("or %%g0, %0, %%g2\n\t" - "or %%g0, %1, %%g3\n\t" - "stda %%g2, [%2] %3\n\t" : : - "r" (data0), "r" (data1), - "r" (MXCC_SRCSTREAM), - "i" (ASI_M_MXCC) : "g2", "g3"); -} - -static inline void mxcc_set_stream_dst(unsigned long *paddr) -{ - unsigned long data0 = paddr[0]; - unsigned long data1 = paddr[1]; - - __asm__ __volatile__ ("or %%g0, %0, %%g2\n\t" - "or %%g0, %1, %%g3\n\t" - "stda %%g2, [%2] %3\n\t" : : - "r" (data0), "r" (data1), - "r" (MXCC_DESSTREAM), - "i" (ASI_M_MXCC) : "g2", "g3"); -} - -static inline unsigned long mxcc_get_creg(void) -{ - unsigned long mxcc_control; - - __asm__ __volatile__("set 0xffffffff, %%g2\n\t" - "set 0xffffffff, %%g3\n\t" - "stda %%g2, [%1] %2\n\t" - "lda [%3] %2, %0\n\t" : - "=r" (mxcc_control) : - "r" (MXCC_EREG), "i" (ASI_M_MXCC), - "r" (MXCC_CREG) : "g2", "g3"); - return mxcc_control; -} - -static inline void mxcc_set_creg(unsigned long mxcc_control) -{ - __asm__ __volatile__("sta %0, [%1] %2\n\t" : : - "r" (mxcc_control), "r" (MXCC_CREG), - "i" (ASI_M_MXCC)); -} - -#endif /* !__ASSEMBLY__ */ - -#endif /* !(_SPARC_MXCC_H) */ diff --git a/include/asm-sparc/namei.h b/include/asm-sparc/namei.h deleted file mode 100644 index 0646102fb020..000000000000 --- a/include/asm-sparc/namei.h +++ /dev/null @@ -1,13 +0,0 @@ -/* - * linux/include/asm-sparc/namei.h - * - * Routines to handle famous /usr/gnemul/s*. - * Included from linux/fs/namei.c - */ - -#ifndef __SPARC_NAMEI_H -#define __SPARC_NAMEI_H - -#define __emul_prefix() NULL - -#endif /* __SPARC_NAMEI_H */ diff --git a/include/asm-sparc/obio.h b/include/asm-sparc/obio.h deleted file mode 100644 index 1a7544ceb574..000000000000 --- a/include/asm-sparc/obio.h +++ /dev/null @@ -1,249 +0,0 @@ -/* - * obio.h: Some useful locations in 0xFXXXXXXXX PA obio space on sun4d. - * - * Copyright (C) 1997 Jakub Jelinek <jj@sunsite.mff.cuni.cz> - */ - -#ifndef _SPARC_OBIO_H -#define _SPARC_OBIO_H - -#include <asm/asi.h> - -/* This weird monster likes to use the very upper parts of - 36bit PA for these things :) */ - -/* CSR space (for each XDBUS) - * ------------------------------------------------------------------------ - * | 0xFE | DEVID | | XDBUS ID | | - * ------------------------------------------------------------------------ - * 35 28 27 20 19 10 9 8 7 0 - */ - -#define CSR_BASE_ADDR 0xe0000000 -#define CSR_CPU_SHIFT (32 - 4 - 5) -#define CSR_XDBUS_SHIFT 8 - -#define CSR_BASE(cpu) (((CSR_BASE_ADDR >> CSR_CPU_SHIFT) + cpu) << CSR_CPU_SHIFT) - -/* ECSR space (not for each XDBUS) - * ------------------------------------------------------------------------ - * | 0xF | DEVID[7:1] | | - * ------------------------------------------------------------------------ - * 35 32 31 25 24 0 - */ - -#define ECSR_BASE_ADDR 0x00000000 -#define ECSR_CPU_SHIFT (32 - 5) -#define ECSR_DEV_SHIFT (32 - 8) - -#define ECSR_BASE(cpu) ((cpu) << ECSR_CPU_SHIFT) -#define ECSR_DEV_BASE(devid) ((devid) << ECSR_DEV_SHIFT) - -/* Bus Watcher */ -#define BW_LOCAL_BASE 0xfff00000 - -#define BW_CID 0x00000000 -#define BW_DBUS_CTRL 0x00000008 -#define BW_DBUS_DATA 0x00000010 -#define BW_CTRL 0x00001000 -#define BW_INTR_TABLE 0x00001040 -#define BW_INTR_TABLE_CLEAR 0x00001080 -#define BW_PRESCALER 0x000010c0 -#define BW_PTIMER_LIMIT 0x00002000 -#define BW_PTIMER_COUNTER2 0x00002004 -#define BW_PTIMER_NDLIMIT 0x00002008 -#define BW_PTIMER_CTRL 0x0000200c -#define BW_PTIMER_COUNTER 0x00002010 -#define BW_TIMER_LIMIT 0x00003000 -#define BW_TIMER_COUNTER2 0x00003004 -#define BW_TIMER_NDLIMIT 0x00003008 -#define BW_TIMER_CTRL 0x0000300c -#define BW_TIMER_COUNTER 0x00003010 - -/* BW Control */ -#define BW_CTRL_USER_TIMER 0x00000004 /* Is User Timer Free run enabled */ - -/* Boot Bus */ -#define BB_LOCAL_BASE 0xf0000000 - -#define BB_STAT1 0x00100000 -#define BB_STAT2 0x00120000 -#define BB_STAT3 0x00140000 -#define BB_LEDS 0x002e0000 - -/* Bits in BB_STAT2 */ -#define BB_STAT2_AC_INTR 0x04 /* Aiee! 5ms and power is gone... */ -#define BB_STAT2_TMP_INTR 0x10 /* My Penguins are burning. Are you able to smell it? */ -#define BB_STAT2_FAN_INTR 0x20 /* My fan refuses to work */ -#define BB_STAT2_PWR_INTR 0x40 /* On SC2000, one of the two ACs died. Ok, we go on... */ -#define BB_STAT2_MASK (BB_STAT2_AC_INTR|BB_STAT2_TMP_INTR|BB_STAT2_FAN_INTR|BB_STAT2_PWR_INTR) - -/* Cache Controller */ -#define CC_BASE 0x1F00000 -#define CC_DATSTREAM 0x1F00000 /* Data stream register */ -#define CC_DATSIZE 0x1F0003F /* Size */ -#define CC_SRCSTREAM 0x1F00100 /* Source stream register */ -#define CC_DESSTREAM 0x1F00200 /* Destination stream register */ -#define CC_RMCOUNT 0x1F00300 /* Count of references and misses */ -#define CC_IPEN 0x1F00406 /* Pending Interrupts */ -#define CC_IMSK 0x1F00506 /* Interrupt Mask */ -#define CC_ICLR 0x1F00606 /* Clear pending Interrupts */ -#define CC_IGEN 0x1F00704 /* Generate Interrupt register */ -#define CC_STEST 0x1F00804 /* Internal self-test */ -#define CC_CREG 0x1F00A04 /* Control register */ -#define CC_SREG 0x1F00B00 /* Status register */ -#define CC_RREG 0x1F00C04 /* Reset register */ -#define CC_EREG 0x1F00E00 /* Error code register */ -#define CC_CID 0x1F00F04 /* Component ID */ - -#ifndef __ASSEMBLY__ - -static inline int bw_get_intr_mask(int sbus_level) -{ - int mask; - - __asm__ __volatile__ ("lduha [%1] %2, %0" : - "=r" (mask) : - "r" (BW_LOCAL_BASE + BW_INTR_TABLE + (sbus_level << 3)), - "i" (ASI_M_CTL)); - return mask; -} - -static inline void bw_clear_intr_mask(int sbus_level, int mask) -{ - __asm__ __volatile__ ("stha %0, [%1] %2" : : - "r" (mask), - "r" (BW_LOCAL_BASE + BW_INTR_TABLE_CLEAR + (sbus_level << 3)), - "i" (ASI_M_CTL)); -} - -static inline unsigned bw_get_prof_limit(int cpu) -{ - unsigned limit; - - __asm__ __volatile__ ("lda [%1] %2, %0" : - "=r" (limit) : - "r" (CSR_BASE(cpu) + BW_PTIMER_LIMIT), - "i" (ASI_M_CTL)); - return limit; -} - -static inline void bw_set_prof_limit(int cpu, unsigned limit) -{ - __asm__ __volatile__ ("sta %0, [%1] %2" : : - "r" (limit), - "r" (CSR_BASE(cpu) + BW_PTIMER_LIMIT), - "i" (ASI_M_CTL)); -} - -static inline unsigned bw_get_ctrl(int cpu) -{ - unsigned ctrl; - - __asm__ __volatile__ ("lda [%1] %2, %0" : - "=r" (ctrl) : - "r" (CSR_BASE(cpu) + BW_CTRL), - "i" (ASI_M_CTL)); - return ctrl; -} - -static inline void bw_set_ctrl(int cpu, unsigned ctrl) -{ - __asm__ __volatile__ ("sta %0, [%1] %2" : : - "r" (ctrl), - "r" (CSR_BASE(cpu) + BW_CTRL), - "i" (ASI_M_CTL)); -} - -extern unsigned char cpu_leds[32]; - -static inline void show_leds(int cpuid) -{ - cpuid &= 0x1e; - __asm__ __volatile__ ("stba %0, [%1] %2" : : - "r" ((cpu_leds[cpuid] << 4) | cpu_leds[cpuid+1]), - "r" (ECSR_BASE(cpuid) | BB_LEDS), - "i" (ASI_M_CTL)); -} - -static inline unsigned cc_get_ipen(void) -{ - unsigned pending; - - __asm__ __volatile__ ("lduha [%1] %2, %0" : - "=r" (pending) : - "r" (CC_IPEN), - "i" (ASI_M_MXCC)); - return pending; -} - -static inline void cc_set_iclr(unsigned clear) -{ - __asm__ __volatile__ ("stha %0, [%1] %2" : : - "r" (clear), - "r" (CC_ICLR), - "i" (ASI_M_MXCC)); -} - -static inline unsigned cc_get_imsk(void) -{ - unsigned mask; - - __asm__ __volatile__ ("lduha [%1] %2, %0" : - "=r" (mask) : - "r" (CC_IMSK), - "i" (ASI_M_MXCC)); - return mask; -} - -static inline void cc_set_imsk(unsigned mask) -{ - __asm__ __volatile__ ("stha %0, [%1] %2" : : - "r" (mask), - "r" (CC_IMSK), - "i" (ASI_M_MXCC)); -} - -static inline unsigned cc_get_imsk_other(int cpuid) -{ - unsigned mask; - - __asm__ __volatile__ ("lduha [%1] %2, %0" : - "=r" (mask) : - "r" (ECSR_BASE(cpuid) | CC_IMSK), - "i" (ASI_M_CTL)); - return mask; -} - -static inline void cc_set_imsk_other(int cpuid, unsigned mask) -{ - __asm__ __volatile__ ("stha %0, [%1] %2" : : - "r" (mask), - "r" (ECSR_BASE(cpuid) | CC_IMSK), - "i" (ASI_M_CTL)); -} - -static inline void cc_set_igen(unsigned gen) -{ - __asm__ __volatile__ ("sta %0, [%1] %2" : : - "r" (gen), - "r" (CC_IGEN), - "i" (ASI_M_MXCC)); -} - -/* +-------+-------------+-----------+------------------------------------+ - * | bcast | devid | sid | levels mask | - * +-------+-------------+-----------+------------------------------------+ - * 31 30 23 22 15 14 0 - */ -#define IGEN_MESSAGE(bcast, devid, sid, levels) \ - (((bcast) << 31) | ((devid) << 23) | ((sid) << 15) | (levels)) - -static inline void sun4d_send_ipi(int cpu, int level) -{ - cc_set_igen(IGEN_MESSAGE(0, cpu << 3, 6 + ((level >> 1) & 7), 1 << (level - 1))); -} - -#endif /* !__ASSEMBLY__ */ - -#endif /* !(_SPARC_OBIO_H) */ diff --git a/include/asm-sparc/of_device.h b/include/asm-sparc/of_device.h deleted file mode 100644 index e5f5aedc2293..000000000000 --- a/include/asm-sparc/of_device.h +++ /dev/null @@ -1,38 +0,0 @@ -#ifndef _ASM_SPARC_OF_DEVICE_H -#define _ASM_SPARC_OF_DEVICE_H -#ifdef __KERNEL__ - -#include <linux/device.h> -#include <linux/of.h> -#include <linux/mod_devicetable.h> -#include <asm/openprom.h> - -/* - * The of_device is a kind of "base class" that is a superset of - * struct device for use by devices attached to an OF node and - * probed using OF properties. - */ -struct of_device -{ - struct device_node *node; - struct device dev; - struct resource resource[PROMREG_MAX]; - unsigned int irqs[PROMINTR_MAX]; - int num_irqs; - - void *sysdata; - - int slot; - int portid; - int clock_freq; -}; - -extern void __iomem *of_ioremap(struct resource *res, unsigned long offset, unsigned long size, char *name); -extern void of_iounmap(struct resource *res, void __iomem *base, unsigned long size); - -/* These are just here during the transition */ -#include <linux/of_device.h> -#include <linux/of_platform.h> - -#endif /* __KERNEL__ */ -#endif /* _ASM_SPARC_OF_DEVICE_H */ diff --git a/include/asm-sparc/of_platform.h b/include/asm-sparc/of_platform.h deleted file mode 100644 index 38334351c36b..000000000000 --- a/include/asm-sparc/of_platform.h +++ /dev/null @@ -1,24 +0,0 @@ -#ifndef _ASM_SPARC_OF_PLATFORM_H -#define _ASM_SPARC_OF_PLATFORM_H -/* - * Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corp. - * <benh@kernel.crashing.org> - * Modified for Sparc by merging parts of asm-sparc/of_device.h - * by Stephen Rothwell - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ - -/* This is just here during the transition */ -#include <linux/of_platform.h> - -extern struct bus_type ebus_bus_type; -extern struct bus_type sbus_bus_type; - -#define of_bus_type of_platform_bus_type /* for compatibility */ - -#endif /* _ASM_SPARC_OF_PLATFORM_H */ diff --git a/include/asm-sparc/openprom.h b/include/asm-sparc/openprom.h deleted file mode 100644 index ed4b6bc2b102..000000000000 --- a/include/asm-sparc/openprom.h +++ /dev/null @@ -1,257 +0,0 @@ -#ifndef __SPARC_OPENPROM_H -#define __SPARC_OPENPROM_H - -/* openprom.h: Prom structures and defines for access to the OPENBOOT - * prom routines and data areas. - * - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - */ - -#include <asm/vaddrs.h> - -/* Empirical constants... */ -#define LINUX_OPPROM_MAGIC 0x10010407 - -#ifndef __ASSEMBLY__ -/* V0 prom device operations. */ -struct linux_dev_v0_funcs { - int (*v0_devopen)(char *device_str); - int (*v0_devclose)(int dev_desc); - int (*v0_rdblkdev)(int dev_desc, int num_blks, int blk_st, char *buf); - int (*v0_wrblkdev)(int dev_desc, int num_blks, int blk_st, char *buf); - int (*v0_wrnetdev)(int dev_desc, int num_bytes, char *buf); - int (*v0_rdnetdev)(int dev_desc, int num_bytes, char *buf); - int (*v0_rdchardev)(int dev_desc, int num_bytes, int dummy, char *buf); - int (*v0_wrchardev)(int dev_desc, int num_bytes, int dummy, char *buf); - int (*v0_seekdev)(int dev_desc, long logical_offst, int from); -}; - -/* V2 and later prom device operations. */ -struct linux_dev_v2_funcs { - int (*v2_inst2pkg)(int d); /* Convert ihandle to phandle */ - char * (*v2_dumb_mem_alloc)(char *va, unsigned sz); - void (*v2_dumb_mem_free)(char *va, unsigned sz); - - /* To map devices into virtual I/O space. */ - char * (*v2_dumb_mmap)(char *virta, int which_io, unsigned paddr, unsigned sz); - void (*v2_dumb_munmap)(char *virta, unsigned size); - - int (*v2_dev_open)(char *devpath); - void (*v2_dev_close)(int d); - int (*v2_dev_read)(int d, char *buf, int nbytes); - int (*v2_dev_write)(int d, char *buf, int nbytes); - int (*v2_dev_seek)(int d, int hi, int lo); - - /* Never issued (multistage load support) */ - void (*v2_wheee2)(void); - void (*v2_wheee3)(void); -}; - -struct linux_mlist_v0 { - struct linux_mlist_v0 *theres_more; - char *start_adr; - unsigned num_bytes; -}; - -struct linux_mem_v0 { - struct linux_mlist_v0 **v0_totphys; - struct linux_mlist_v0 **v0_prommap; - struct linux_mlist_v0 **v0_available; /* What we can use */ -}; - -/* Arguments sent to the kernel from the boot prompt. */ -struct linux_arguments_v0 { - char *argv[8]; - char args[100]; - char boot_dev[2]; - int boot_dev_ctrl; - int boot_dev_unit; - int dev_partition; - char *kernel_file_name; - void *aieee1; /* XXX */ -}; - -/* V2 and up boot things. */ -struct linux_bootargs_v2 { - char **bootpath; - char **bootargs; - int *fd_stdin; - int *fd_stdout; -}; - -/* The top level PROM vector. */ -struct linux_romvec { - /* Version numbers. */ - unsigned int pv_magic_cookie; - unsigned int pv_romvers; - unsigned int pv_plugin_revision; - unsigned int pv_printrev; - - /* Version 0 memory descriptors. */ - struct linux_mem_v0 pv_v0mem; - - /* Node operations. */ - struct linux_nodeops *pv_nodeops; - - char **pv_bootstr; - struct linux_dev_v0_funcs pv_v0devops; - - char *pv_stdin; - char *pv_stdout; -#define PROMDEV_KBD 0 /* input from keyboard */ -#define PROMDEV_SCREEN 0 /* output to screen */ -#define PROMDEV_TTYA 1 /* in/out to ttya */ -#define PROMDEV_TTYB 2 /* in/out to ttyb */ - - /* Blocking getchar/putchar. NOT REENTRANT! (grr) */ - int (*pv_getchar)(void); - void (*pv_putchar)(int ch); - - /* Non-blocking variants. */ - int (*pv_nbgetchar)(void); - int (*pv_nbputchar)(int ch); - - void (*pv_putstr)(char *str, int len); - - /* Miscellany. */ - void (*pv_reboot)(char *bootstr); - void (*pv_printf)(__const__ char *fmt, ...); - void (*pv_abort)(void); - __volatile__ int *pv_ticks; - void (*pv_halt)(void); - void (**pv_synchook)(void); - - /* Evaluate a forth string, not different proto for V0 and V2->up. */ - union { - void (*v0_eval)(int len, char *str); - void (*v2_eval)(char *str); - } pv_fortheval; - - struct linux_arguments_v0 **pv_v0bootargs; - - /* Get ether address. */ - unsigned int (*pv_enaddr)(int d, char *enaddr); - - struct linux_bootargs_v2 pv_v2bootargs; - struct linux_dev_v2_funcs pv_v2devops; - - int filler[15]; - - /* This one is sun4c/sun4 only. */ - void (*pv_setctxt)(int ctxt, char *va, int pmeg); - - /* Prom version 3 Multiprocessor routines. This stuff is crazy. - * No joke. Calling these when there is only one cpu probably - * crashes the machine, have to test this. :-) - */ - - /* v3_cpustart() will start the cpu 'whichcpu' in mmu-context - * 'thiscontext' executing at address 'prog_counter' - */ - int (*v3_cpustart)(unsigned int whichcpu, int ctxtbl_ptr, - int thiscontext, char *prog_counter); - - /* v3_cpustop() will cause cpu 'whichcpu' to stop executing - * until a resume cpu call is made. - */ - int (*v3_cpustop)(unsigned int whichcpu); - - /* v3_cpuidle() will idle cpu 'whichcpu' until a stop or - * resume cpu call is made. - */ - int (*v3_cpuidle)(unsigned int whichcpu); - - /* v3_cpuresume() will resume processor 'whichcpu' executing - * starting with whatever 'pc' and 'npc' were left at the - * last 'idle' or 'stop' call. - */ - int (*v3_cpuresume)(unsigned int whichcpu); -}; - -/* Routines for traversing the prom device tree. */ -struct linux_nodeops { - int (*no_nextnode)(int node); - int (*no_child)(int node); - int (*no_proplen)(int node, char *name); - int (*no_getprop)(int node, char *name, char *val); - int (*no_setprop)(int node, char *name, char *val, int len); - char * (*no_nextprop)(int node, char *name); -}; - -/* More fun PROM structures for device probing. */ -#define PROMREG_MAX 16 -#define PROMVADDR_MAX 16 -#define PROMINTR_MAX 15 - -struct linux_prom_registers { - unsigned int which_io; /* is this in OBIO space? */ - unsigned int phys_addr; /* The physical address of this register */ - unsigned int reg_size; /* How many bytes does this register take up? */ -}; - -struct linux_prom_irqs { - int pri; /* IRQ priority */ - int vector; /* This is foobar, what does it do? */ -}; - -/* Element of the "ranges" vector */ -struct linux_prom_ranges { - unsigned int ot_child_space; - unsigned int ot_child_base; /* Bus feels this */ - unsigned int ot_parent_space; - unsigned int ot_parent_base; /* CPU looks from here */ - unsigned int or_size; -}; - -/* Ranges and reg properties are a bit different for PCI. */ -struct linux_prom_pci_registers { - /* - * We don't know what information this field contain. - * We guess, PCI device function is in bits 15:8 - * So, ... - */ - unsigned int which_io; /* Let it be which_io */ - - unsigned int phys_hi; - unsigned int phys_lo; - - unsigned int size_hi; - unsigned int size_lo; -}; - -struct linux_prom_pci_ranges { - unsigned int child_phys_hi; /* Only certain bits are encoded here. */ - unsigned int child_phys_mid; - unsigned int child_phys_lo; - - unsigned int parent_phys_hi; - unsigned int parent_phys_lo; - - unsigned int size_hi; - unsigned int size_lo; -}; - -struct linux_prom_pci_assigned_addresses { - unsigned int which_io; - - unsigned int phys_hi; - unsigned int phys_lo; - - unsigned int size_hi; - unsigned int size_lo; -}; - -struct linux_prom_ebus_ranges { - unsigned int child_phys_hi; - unsigned int child_phys_lo; - - unsigned int parent_phys_hi; - unsigned int parent_phys_mid; - unsigned int parent_phys_lo; - - unsigned int size; -}; - -#endif /* !(__ASSEMBLY__) */ - -#endif /* !(__SPARC_OPENPROM_H) */ diff --git a/include/asm-sparc/openpromio.h b/include/asm-sparc/openpromio.h deleted file mode 100644 index 917fb8e9c633..000000000000 --- a/include/asm-sparc/openpromio.h +++ /dev/null @@ -1,69 +0,0 @@ -#ifndef _SPARC_OPENPROMIO_H -#define _SPARC_OPENPROMIO_H - -#include <linux/compiler.h> -#include <linux/ioctl.h> -#include <linux/types.h> - -/* - * SunOS and Solaris /dev/openprom definitions. The ioctl values - * were chosen to be exactly equal to the SunOS equivalents. - */ - -struct openpromio -{ - u_int oprom_size; /* Actual size of the oprom_array. */ - char oprom_array[1]; /* Holds property names and values. */ -}; - -#define OPROMMAXPARAM 4096 /* Maximum size of oprom_array. */ - -#define OPROMGETOPT 0x20004F01 -#define OPROMSETOPT 0x20004F02 -#define OPROMNXTOPT 0x20004F03 -#define OPROMSETOPT2 0x20004F04 -#define OPROMNEXT 0x20004F05 -#define OPROMCHILD 0x20004F06 -#define OPROMGETPROP 0x20004F07 -#define OPROMNXTPROP 0x20004F08 -#define OPROMU2P 0x20004F09 -#define OPROMGETCONS 0x20004F0A -#define OPROMGETFBNAME 0x20004F0B -#define OPROMGETBOOTARGS 0x20004F0C -/* Linux extensions */ /* Arguments in oprom_array: */ -#define OPROMSETCUR 0x20004FF0 /* int node - Sets current node */ -#define OPROMPCI2NODE 0x20004FF1 /* int pci_bus, pci_devfn - Sets current node to PCI device's node */ -#define OPROMPATH2NODE 0x20004FF2 /* char path[] - Set current node from fully qualified PROM path */ - -/* - * Return values from OPROMGETCONS: - */ - -#define OPROMCONS_NOT_WSCONS 0 -#define OPROMCONS_STDIN_IS_KBD 0x1 /* stdin device is kbd */ -#define OPROMCONS_STDOUT_IS_FB 0x2 /* stdout is a framebuffer */ -#define OPROMCONS_OPENPROM 0x4 /* supports openboot */ - - -/* - * NetBSD/OpenBSD /dev/openprom definitions. - */ - -struct opiocdesc -{ - int op_nodeid; /* PROM Node ID (value-result) */ - int op_namelen; /* Length of op_name. */ - char __user *op_name; /* Pointer to the property name. */ - int op_buflen; /* Length of op_buf (value-result) */ - char __user *op_buf; /* Pointer to buffer. */ -}; - -#define OPIOCGET _IOWR('O', 1, struct opiocdesc) -#define OPIOCSET _IOW('O', 2, struct opiocdesc) -#define OPIOCNEXTPROP _IOWR('O', 3, struct opiocdesc) -#define OPIOCGETOPTNODE _IOR('O', 4, int) -#define OPIOCGETNEXT _IOWR('O', 5, int) -#define OPIOCGETCHILD _IOWR('O', 6, int) - -#endif /* _SPARC_OPENPROMIO_H */ - diff --git a/include/asm-sparc/oplib.h b/include/asm-sparc/oplib.h deleted file mode 100644 index 61c3ca6a8ac3..000000000000 --- a/include/asm-sparc/oplib.h +++ /dev/null @@ -1,273 +0,0 @@ -/* - * oplib.h: Describes the interface and available routines in the - * Linux Prom library. - * - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - */ - -#ifndef __SPARC_OPLIB_H -#define __SPARC_OPLIB_H - -#include <asm/openprom.h> -#include <linux/spinlock.h> -#include <linux/compiler.h> - -/* The master romvec pointer... */ -extern struct linux_romvec *romvec; - -/* Enumeration to describe the prom major version we have detected. */ -enum prom_major_version { - PROM_V0, /* Original sun4c V0 prom */ - PROM_V2, /* sun4c and early sun4m V2 prom */ - PROM_V3, /* sun4m and later, up to sun4d/sun4e machines V3 */ - PROM_P1275, /* IEEE compliant ISA based Sun PROM, only sun4u */ - PROM_AP1000, /* actually no prom at all */ - PROM_SUN4, /* Old sun4 proms are totally different, but we'll shoehorn it to make it fit */ -}; - -extern enum prom_major_version prom_vers; -/* Revision, and firmware revision. */ -extern unsigned int prom_rev, prom_prev; - -/* Root node of the prom device tree, this stays constant after - * initialization is complete. - */ -extern int prom_root_node; - -/* Pointer to prom structure containing the device tree traversal - * and usage utility functions. Only prom-lib should use these, - * users use the interface defined by the library only! - */ -extern struct linux_nodeops *prom_nodeops; - -/* The functions... */ - -/* You must call prom_init() before using any of the library services, - * preferably as early as possible. Pass it the romvec pointer. - */ -extern void prom_init(struct linux_romvec *rom_ptr); - -/* Boot argument acquisition, returns the boot command line string. */ -extern char *prom_getbootargs(void); - -/* Device utilities. */ - -/* Map and unmap devices in IO space at virtual addresses. Note that the - * virtual address you pass is a request and the prom may put your mappings - * somewhere else, so check your return value as that is where your new - * mappings really are! - * - * Another note, these are only available on V2 or higher proms! - */ -extern char *prom_mapio(char *virt_hint, int io_space, unsigned int phys_addr, unsigned int num_bytes); -extern void prom_unmapio(char *virt_addr, unsigned int num_bytes); - -/* Device operations. */ - -/* Open the device described by the passed string. Note, that the format - * of the string is different on V0 vs. V2->higher proms. The caller must - * know what he/she is doing! Returns the device descriptor, an int. - */ -extern int prom_devopen(char *device_string); - -/* Close a previously opened device described by the passed integer - * descriptor. - */ -extern int prom_devclose(int device_handle); - -/* Do a seek operation on the device described by the passed integer - * descriptor. - */ -extern void prom_seek(int device_handle, unsigned int seek_hival, - unsigned int seek_lowval); - -/* Miscellaneous routines, don't really fit in any category per se. */ - -/* Reboot the machine with the command line passed. */ -extern void prom_reboot(char *boot_command); - -/* Evaluate the forth string passed. */ -extern void prom_feval(char *forth_string); - -/* Enter the prom, with possibility of continuation with the 'go' - * command in newer proms. - */ -extern void prom_cmdline(void); - -/* Enter the prom, with no chance of continuation for the stand-alone - * which calls this. - */ -extern void prom_halt(void) __attribute__ ((noreturn)); - -/* Set the PROM 'sync' callback function to the passed function pointer. - * When the user gives the 'sync' command at the prom prompt while the - * kernel is still active, the prom will call this routine. - * - * XXX The arguments are different on V0 vs. V2->higher proms, grrr! XXX - */ -typedef void (*sync_func_t)(void); -extern void prom_setsync(sync_func_t func_ptr); - -/* Acquire the IDPROM of the root node in the prom device tree. This - * gets passed a buffer where you would like it stuffed. The return value - * is the format type of this idprom or 0xff on error. - */ -extern unsigned char prom_get_idprom(char *idp_buffer, int idpbuf_size); - -/* Get the prom major version. */ -extern int prom_version(void); - -/* Get the prom plugin revision. */ -extern int prom_getrev(void); - -/* Get the prom firmware revision. */ -extern int prom_getprev(void); - -/* Character operations to/from the console.... */ - -/* Non-blocking get character from console. */ -extern int prom_nbgetchar(void); - -/* Non-blocking put character to console. */ -extern int prom_nbputchar(char character); - -/* Blocking get character from console. */ -extern char prom_getchar(void); - -/* Blocking put character to console. */ -extern void prom_putchar(char character); - -/* Prom's internal routines, don't use in kernel/boot code. */ -extern void prom_printf(char *fmt, ...); -extern void prom_write(const char *buf, unsigned int len); - -/* Multiprocessor operations... */ - -/* Start the CPU with the given device tree node, context table, and context - * at the passed program counter. - */ -extern int prom_startcpu(int cpunode, struct linux_prom_registers *context_table, - int context, char *program_counter); - -/* Stop the CPU with the passed device tree node. */ -extern int prom_stopcpu(int cpunode); - -/* Idle the CPU with the passed device tree node. */ -extern int prom_idlecpu(int cpunode); - -/* Re-Start the CPU with the passed device tree node. */ -extern int prom_restartcpu(int cpunode); - -/* PROM memory allocation facilities... */ - -/* Allocated at possibly the given virtual address a chunk of the - * indicated size. - */ -extern char *prom_alloc(char *virt_hint, unsigned int size); - -/* Free a previously allocated chunk. */ -extern void prom_free(char *virt_addr, unsigned int size); - -/* Sun4/sun4c specific memory-management startup hook. */ - -/* Map the passed segment in the given context at the passed - * virtual address. - */ -extern void prom_putsegment(int context, unsigned long virt_addr, - int physical_segment); - - -/* PROM device tree traversal functions... */ - -#ifdef PROMLIB_INTERNAL - -/* Internal version of prom_getchild. */ -extern int __prom_getchild(int parent_node); - -/* Internal version of prom_getsibling. */ -extern int __prom_getsibling(int node); - -#endif - - -/* Get the child node of the given node, or zero if no child exists. */ -extern int prom_getchild(int parent_node); - -/* Get the next sibling node of the given node, or zero if no further - * siblings exist. - */ -extern int prom_getsibling(int node); - -/* Get the length, at the passed node, of the given property type. - * Returns -1 on error (ie. no such property at this node). - */ -extern int prom_getproplen(int thisnode, char *property); - -/* Fetch the requested property using the given buffer. Returns - * the number of bytes the prom put into your buffer or -1 on error. - */ -extern int __must_check prom_getproperty(int thisnode, char *property, - char *prop_buffer, int propbuf_size); - -/* Acquire an integer property. */ -extern int prom_getint(int node, char *property); - -/* Acquire an integer property, with a default value. */ -extern int prom_getintdefault(int node, char *property, int defval); - -/* Acquire a boolean property, 0=FALSE 1=TRUE. */ -extern int prom_getbool(int node, char *prop); - -/* Acquire a string property, null string on error. */ -extern void prom_getstring(int node, char *prop, char *buf, int bufsize); - -/* Does the passed node have the given "name"? YES=1 NO=0 */ -extern int prom_nodematch(int thisnode, char *name); - -/* Search all siblings starting at the passed node for "name" matching - * the given string. Returns the node on success, zero on failure. - */ -extern int prom_searchsiblings(int node_start, char *name); - -/* Return the first property type, as a string, for the given node. - * Returns a null string on error. - */ -extern char *prom_firstprop(int node, char *buffer); - -/* Returns the next property after the passed property for the given - * node. Returns null string on failure. - */ -extern char *prom_nextprop(int node, char *prev_property, char *buffer); - -/* Returns phandle of the path specified */ -extern int prom_finddevice(char *name); - -/* Returns 1 if the specified node has given property. */ -extern int prom_node_has_property(int node, char *property); - -/* Set the indicated property at the given node with the passed value. - * Returns the number of bytes of your value that the prom took. - */ -extern int prom_setprop(int node, char *prop_name, char *prop_value, - int value_size); - -extern int prom_pathtoinode(char *path); -extern int prom_inst2pkg(int); - -/* Dorking with Bus ranges... */ - -/* Apply promlib probes OBIO ranges to registers. */ -extern void prom_apply_obio_ranges(struct linux_prom_registers *obioregs, int nregs); - -/* Apply ranges of any prom node (and optionally parent node as well) to registers. */ -extern void prom_apply_generic_ranges(int node, int parent, - struct linux_prom_registers *sbusregs, int nregs); - -/* CPU probing helpers. */ -int cpu_find_by_instance(int instance, int *prom_node, int *mid); -int cpu_find_by_mid(int mid, int *prom_node); -int cpu_get_hwmid(int prom_node); - -extern spinlock_t prom_lock; - -#endif /* !(__SPARC_OPLIB_H) */ diff --git a/include/asm-sparc/page.h b/include/asm-sparc/page.h deleted file mode 100644 index 6aa9e4c910cf..000000000000 --- a/include/asm-sparc/page.h +++ /dev/null @@ -1,165 +0,0 @@ -/* - * page.h: Various defines and such for MMU operations on the Sparc for - * the Linux kernel. - * - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - */ - -#ifndef _SPARC_PAGE_H -#define _SPARC_PAGE_H - -#ifdef CONFIG_SUN4 -#define PAGE_SHIFT 13 -#else -#define PAGE_SHIFT 12 -#endif -#ifndef __ASSEMBLY__ -/* I have my suspicions... -DaveM */ -#define PAGE_SIZE (1UL << PAGE_SHIFT) -#else -#define PAGE_SIZE (1 << PAGE_SHIFT) -#endif -#define PAGE_MASK (~(PAGE_SIZE-1)) - -#include <asm/btfixup.h> - -#ifndef __ASSEMBLY__ - -#define clear_page(page) memset((void *)(page), 0, PAGE_SIZE) -#define copy_page(to,from) memcpy((void *)(to), (void *)(from), PAGE_SIZE) -#define clear_user_page(addr, vaddr, page) \ - do { clear_page(addr); \ - sparc_flush_page_to_ram(page); \ - } while (0) -#define copy_user_page(to, from, vaddr, page) \ - do { copy_page(to, from); \ - sparc_flush_page_to_ram(page); \ - } while (0) - -/* The following structure is used to hold the physical - * memory configuration of the machine. This is filled in - * prom_meminit() and is later used by mem_init() to set up - * mem_map[]. We statically allocate SPARC_PHYS_BANKS+1 of - * these structs, this is arbitrary. The entry after the - * last valid one has num_bytes==0. - */ -struct sparc_phys_banks { - unsigned long base_addr; - unsigned long num_bytes; -}; - -#define SPARC_PHYS_BANKS 32 - -extern struct sparc_phys_banks sp_banks[SPARC_PHYS_BANKS+1]; - -/* Cache alias structure. Entry is valid if context != -1. */ -struct cache_palias { - unsigned long vaddr; - int context; -}; - -extern struct cache_palias *sparc_aliases; - -/* passing structs on the Sparc slow us down tremendously... */ - -/* #define STRICT_MM_TYPECHECKS */ - -#ifdef STRICT_MM_TYPECHECKS -/* - * These are used to make use of C type-checking.. - */ -typedef struct { unsigned long pte; } pte_t; -typedef struct { unsigned long iopte; } iopte_t; -typedef struct { unsigned long pmdv[16]; } pmd_t; -typedef struct { unsigned long pgd; } pgd_t; -typedef struct { unsigned long ctxd; } ctxd_t; -typedef struct { unsigned long pgprot; } pgprot_t; -typedef struct { unsigned long iopgprot; } iopgprot_t; - -#define pte_val(x) ((x).pte) -#define iopte_val(x) ((x).iopte) -#define pmd_val(x) ((x).pmdv[0]) -#define pgd_val(x) ((x).pgd) -#define ctxd_val(x) ((x).ctxd) -#define pgprot_val(x) ((x).pgprot) -#define iopgprot_val(x) ((x).iopgprot) - -#define __pte(x) ((pte_t) { (x) } ) -#define __iopte(x) ((iopte_t) { (x) } ) -/* #define __pmd(x) ((pmd_t) { (x) } ) */ /* XXX procedure with loop */ -#define __pgd(x) ((pgd_t) { (x) } ) -#define __ctxd(x) ((ctxd_t) { (x) } ) -#define __pgprot(x) ((pgprot_t) { (x) } ) -#define __iopgprot(x) ((iopgprot_t) { (x) } ) - -#else -/* - * .. while these make it easier on the compiler - */ -typedef unsigned long pte_t; -typedef unsigned long iopte_t; -typedef struct { unsigned long pmdv[16]; } pmd_t; -typedef unsigned long pgd_t; -typedef unsigned long ctxd_t; -typedef unsigned long pgprot_t; -typedef unsigned long iopgprot_t; - -#define pte_val(x) (x) -#define iopte_val(x) (x) -#define pmd_val(x) ((x).pmdv[0]) -#define pgd_val(x) (x) -#define ctxd_val(x) (x) -#define pgprot_val(x) (x) -#define iopgprot_val(x) (x) - -#define __pte(x) (x) -#define __iopte(x) (x) -/* #define __pmd(x) (x) */ /* XXX later */ -#define __pgd(x) (x) -#define __ctxd(x) (x) -#define __pgprot(x) (x) -#define __iopgprot(x) (x) - -#endif - -typedef struct page *pgtable_t; - -extern unsigned long sparc_unmapped_base; - -BTFIXUPDEF_SETHI(sparc_unmapped_base) - -#define TASK_UNMAPPED_BASE BTFIXUP_SETHI(sparc_unmapped_base) - -#else /* !(__ASSEMBLY__) */ - -#define __pgprot(x) (x) - -#endif /* !(__ASSEMBLY__) */ - -/* to align the pointer to the (next) page boundary */ -#define PAGE_ALIGN(addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK) - -#define PAGE_OFFSET 0xf0000000 -#ifndef __ASSEMBLY__ -extern unsigned long phys_base; -extern unsigned long pfn_base; -#endif -#define __pa(x) ((unsigned long)(x) - PAGE_OFFSET + phys_base) -#define __va(x) ((void *)((unsigned long) (x) - phys_base + PAGE_OFFSET)) - -#define virt_to_phys __pa -#define phys_to_virt __va - -#define ARCH_PFN_OFFSET (pfn_base) -#define virt_to_page(kaddr) (mem_map + ((((unsigned long)(kaddr)-PAGE_OFFSET)>>PAGE_SHIFT))) - -#define pfn_valid(pfn) (((pfn) >= (pfn_base)) && (((pfn)-(pfn_base)) < max_mapnr)) -#define virt_addr_valid(kaddr) ((((unsigned long)(kaddr)-PAGE_OFFSET)>>PAGE_SHIFT) < max_mapnr) - -#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \ - VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) - -#include <asm-generic/memory_model.h> -#include <asm-generic/page.h> - -#endif /* _SPARC_PAGE_H */ diff --git a/include/asm-sparc/param.h b/include/asm-sparc/param.h deleted file mode 100644 index 9836d9a3cb9a..000000000000 --- a/include/asm-sparc/param.h +++ /dev/null @@ -1,22 +0,0 @@ -#ifndef _ASMSPARC_PARAM_H -#define _ASMSPARC_PARAM_H - -#ifdef __KERNEL__ -# define HZ CONFIG_HZ /* Internal kernel timer frequency */ -# define USER_HZ 100 /* .. some user interfaces are in "ticks" */ -# define CLOCKS_PER_SEC (USER_HZ) -#endif - -#ifndef HZ -#define HZ 100 -#endif - -#define EXEC_PAGESIZE 8192 /* Thanks for sun4's we carry baggage... */ - -#ifndef NOGROUP -#define NOGROUP (-1) -#endif - -#define MAXHOSTNAMELEN 64 /* max length of hostname */ - -#endif diff --git a/include/asm-sparc/pbm.h b/include/asm-sparc/pbm.h deleted file mode 100644 index 458a4916d14d..000000000000 --- a/include/asm-sparc/pbm.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * - * pbm.h: PCI bus module pseudo driver software state - * Adopted from sparc64 by V. Roganov and G. Raiko - * - * Original header: - * pbm.h: U2P PCI bus module pseudo driver software state. - * - * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu) - * - * To put things into perspective, consider sparc64 with a few PCI controllers. - * Each type would have an own structure, with instances related one to one. - * We have only pcic on sparc, but we want to be compatible with sparc64 pbm.h. - * All three represent different abstractions. - * pci_bus - Linux PCI subsystem view of a PCI bus (including bridged buses) - * pbm - Arch-specific view of a PCI bus (sparc or sparc64) - * pcic - Chip-specific information for PCIC. - */ - -#ifndef __SPARC_PBM_H -#define __SPARC_PBM_H - -#include <linux/pci.h> -#include <asm/oplib.h> -#include <asm/prom.h> - -struct linux_pbm_info { - int prom_node; - char prom_name[64]; - /* struct linux_prom_pci_ranges pbm_ranges[PROMREG_MAX]; */ - /* int num_pbm_ranges; */ - - /* Now things for the actual PCI bus probes. */ - unsigned int pci_first_busno; /* Can it be nonzero? */ - struct pci_bus *pci_bus; /* Was inline, MJ allocs now */ -}; - -/* PCI devices which are not bridges have this placed in their pci_dev - * sysdata member. This makes OBP aware PCI device drivers easier to - * code. - */ -struct pcidev_cookie { - struct linux_pbm_info *pbm; - struct device_node *prom_node; -}; - -#endif /* !(__SPARC_PBM_H) */ diff --git a/include/asm-sparc/pci.h b/include/asm-sparc/pci.h deleted file mode 100644 index b93b6c79e08f..000000000000 --- a/include/asm-sparc/pci.h +++ /dev/null @@ -1,170 +0,0 @@ -#ifndef __SPARC_PCI_H -#define __SPARC_PCI_H - -#ifdef __KERNEL__ - -/* Can be used to override the logic in pci_scan_bus for skipping - * already-configured bus numbers - to be used for buggy BIOSes - * or architectures with incomplete PCI setup by the loader. - */ -#define pcibios_assign_all_busses() 0 -#define pcibios_scan_all_fns(a, b) 0 - -#define PCIBIOS_MIN_IO 0UL -#define PCIBIOS_MIN_MEM 0UL - -#define PCI_IRQ_NONE 0xffffffff - -static inline void pcibios_set_master(struct pci_dev *dev) -{ - /* No special bus mastering setup handling */ -} - -static inline void pcibios_penalize_isa_irq(int irq, int active) -{ - /* We don't do dynamic PCI IRQ allocation */ -} - -/* Dynamic DMA mapping stuff. - */ -#define PCI_DMA_BUS_IS_PHYS (0) - -#include <asm/scatterlist.h> - -struct pci_dev; - -/* Allocate and map kernel buffer using consistent mode DMA for a device. - * hwdev should be valid struct pci_dev pointer for PCI devices. - */ -extern void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size, dma_addr_t *dma_handle); - -/* Free and unmap a consistent DMA buffer. - * cpu_addr is what was returned from pci_alloc_consistent, - * size must be the same as what as passed into pci_alloc_consistent, - * and likewise dma_addr must be the same as what *dma_addrp was set to. - * - * References to the memory and mappings assosciated with cpu_addr/dma_addr - * past this call are illegal. - */ -extern void pci_free_consistent(struct pci_dev *hwdev, size_t size, void *vaddr, dma_addr_t dma_handle); - -/* Map a single buffer of the indicated size for DMA in streaming mode. - * The 32-bit bus address to use is returned. - * - * Once the device is given the dma address, the device owns this memory - * until either pci_unmap_single or pci_dma_sync_single_for_cpu is performed. - */ -extern dma_addr_t pci_map_single(struct pci_dev *hwdev, void *ptr, size_t size, int direction); - -/* Unmap a single streaming mode DMA translation. The dma_addr and size - * must match what was provided for in a previous pci_map_single call. All - * other usages are undefined. - * - * After this call, reads by the cpu to the buffer are guaranteed to see - * whatever the device wrote there. - */ -extern void pci_unmap_single(struct pci_dev *hwdev, dma_addr_t dma_addr, size_t size, int direction); - -/* pci_unmap_{single,page} is not a nop, thus... */ -#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \ - dma_addr_t ADDR_NAME; -#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) \ - __u32 LEN_NAME; -#define pci_unmap_addr(PTR, ADDR_NAME) \ - ((PTR)->ADDR_NAME) -#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) \ - (((PTR)->ADDR_NAME) = (VAL)) -#define pci_unmap_len(PTR, LEN_NAME) \ - ((PTR)->LEN_NAME) -#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \ - (((PTR)->LEN_NAME) = (VAL)) - -/* - * Same as above, only with pages instead of mapped addresses. - */ -extern dma_addr_t pci_map_page(struct pci_dev *hwdev, struct page *page, - unsigned long offset, size_t size, int direction); -extern void pci_unmap_page(struct pci_dev *hwdev, - dma_addr_t dma_address, size_t size, int direction); - -/* Map a set of buffers described by scatterlist in streaming - * mode for DMA. This is the scather-gather version of the - * above pci_map_single interface. Here the scatter gather list - * elements are each tagged with the appropriate dma address - * and length. They are obtained via sg_dma_{address,length}(SG). - * - * NOTE: An implementation may be able to use a smaller number of - * DMA address/length pairs than there are SG table elements. - * (for example via virtual mapping capabilities) - * The routine returns the number of addr/length pairs actually - * used, at most nents. - * - * Device ownership issues as mentioned above for pci_map_single are - * the same here. - */ -extern int pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sg, int nents, int direction); - -/* Unmap a set of streaming mode DMA translations. - * Again, cpu read rules concerning calls here are the same as for - * pci_unmap_single() above. - */ -extern void pci_unmap_sg(struct pci_dev *hwdev, struct scatterlist *sg, int nhwents, int direction); - -/* Make physical memory consistent for a single - * streaming mode DMA translation after a transfer. - * - * If you perform a pci_map_single() but wish to interrogate the - * buffer using the cpu, yet do not wish to teardown the PCI dma - * mapping, you must call this function before doing so. At the - * next point you give the PCI dma address back to the card, you - * must first perform a pci_dma_sync_for_device, and then the device - * again owns the buffer. - */ -extern void pci_dma_sync_single_for_cpu(struct pci_dev *hwdev, dma_addr_t dma_handle, size_t size, int direction); -extern void pci_dma_sync_single_for_device(struct pci_dev *hwdev, dma_addr_t dma_handle, size_t size, int direction); - -/* Make physical memory consistent for a set of streaming - * mode DMA translations after a transfer. - * - * The same as pci_dma_sync_single_* but for a scatter-gather list, - * same rules and usage. - */ -extern void pci_dma_sync_sg_for_cpu(struct pci_dev *hwdev, struct scatterlist *sg, int nelems, int direction); -extern void pci_dma_sync_sg_for_device(struct pci_dev *hwdev, struct scatterlist *sg, int nelems, int direction); - -/* Return whether the given PCI device DMA address mask can - * be supported properly. For example, if your device can - * only drive the low 24-bits during PCI bus mastering, then - * you would pass 0x00ffffff as the mask to this function. - */ -static inline int pci_dma_supported(struct pci_dev *hwdev, u64 mask) -{ - return 1; -} - -#ifdef CONFIG_PCI -static inline void pci_dma_burst_advice(struct pci_dev *pdev, - enum pci_dma_burst_strategy *strat, - unsigned long *strategy_parameter) -{ - *strat = PCI_DMA_BURST_INFINITY; - *strategy_parameter = ~0UL; -} -#endif - -#define PCI_DMA_ERROR_CODE (~(dma_addr_t)0x0) - -static inline int pci_dma_mapping_error(dma_addr_t dma_addr) -{ - return (dma_addr == PCI_DMA_ERROR_CODE); -} - -struct device_node; -extern struct device_node *pci_device_to_OF_node(struct pci_dev *pdev); - -#endif /* __KERNEL__ */ - -/* generic pci stuff */ -#include <asm-generic/pci.h> - -#endif /* __SPARC_PCI_H */ diff --git a/include/asm-sparc/pcic.h b/include/asm-sparc/pcic.h deleted file mode 100644 index f20ef562b265..000000000000 --- a/include/asm-sparc/pcic.h +++ /dev/null @@ -1,123 +0,0 @@ -/* - * pcic.h: JavaEngine 1 specific PCI definitions. - * - * Copyright (C) 1998 V. Roganov and G. Raiko - */ - -#ifndef __SPARC_PCIC_H -#define __SPARC_PCIC_H - -#ifndef __ASSEMBLY__ - -#include <linux/types.h> -#include <linux/smp.h> -#include <linux/pci.h> -#include <linux/ioport.h> -#include <asm/pbm.h> - -struct linux_pcic { - void __iomem *pcic_regs; - unsigned long pcic_io; - void __iomem *pcic_config_space_addr; - void __iomem *pcic_config_space_data; - struct resource pcic_res_regs; - struct resource pcic_res_io; - struct resource pcic_res_cfg_addr; - struct resource pcic_res_cfg_data; - struct linux_pbm_info pbm; - struct pcic_ca2irq *pcic_imap; - int pcic_imdim; -}; - -extern int pcic_probe(void); -/* Erm... MJ redefined pcibios_present() so that it does not work early. */ -extern int pcic_present(void); -extern void sun4m_pci_init_IRQ(void); - -#endif - -/* Size of PCI I/O space which we relocate. */ -#define PCI_SPACE_SIZE 0x1000000 /* 16 MB */ - -/* PCIC Register Set. */ -#define PCI_DIAGNOSTIC_0 0x40 /* 32 bits */ -#define PCI_SIZE_0 0x44 /* 32 bits */ -#define PCI_SIZE_1 0x48 /* 32 bits */ -#define PCI_SIZE_2 0x4c /* 32 bits */ -#define PCI_SIZE_3 0x50 /* 32 bits */ -#define PCI_SIZE_4 0x54 /* 32 bits */ -#define PCI_SIZE_5 0x58 /* 32 bits */ -#define PCI_PIO_CONTROL 0x60 /* 8 bits */ -#define PCI_DVMA_CONTROL 0x62 /* 8 bits */ -#define PCI_DVMA_CONTROL_INACTIVITY_REQ (1<<0) -#define PCI_DVMA_CONTROL_IOTLB_ENABLE (1<<0) -#define PCI_DVMA_CONTROL_IOTLB_DISABLE 0 -#define PCI_DVMA_CONTROL_INACTIVITY_ACK (1<<4) -#define PCI_INTERRUPT_CONTROL 0x63 /* 8 bits */ -#define PCI_CPU_INTERRUPT_PENDING 0x64 /* 32 bits */ -#define PCI_DIAGNOSTIC_1 0x68 /* 16 bits */ -#define PCI_SOFTWARE_INT_CLEAR 0x6a /* 16 bits */ -#define PCI_SOFTWARE_INT_SET 0x6e /* 16 bits */ -#define PCI_SYS_INT_PENDING 0x70 /* 32 bits */ -#define PCI_SYS_INT_PENDING_PIO 0x40000000 -#define PCI_SYS_INT_PENDING_DMA 0x20000000 -#define PCI_SYS_INT_PENDING_PCI 0x10000000 -#define PCI_SYS_INT_PENDING_APSR 0x08000000 -#define PCI_SYS_INT_TARGET_MASK 0x74 /* 32 bits */ -#define PCI_SYS_INT_TARGET_MASK_CLEAR 0x78 /* 32 bits */ -#define PCI_SYS_INT_TARGET_MASK_SET 0x7c /* 32 bits */ -#define PCI_SYS_INT_PENDING_CLEAR 0x83 /* 8 bits */ -#define PCI_SYS_INT_PENDING_CLEAR_ALL 0x80 -#define PCI_SYS_INT_PENDING_CLEAR_PIO 0x40 -#define PCI_SYS_INT_PENDING_CLEAR_DMA 0x20 -#define PCI_SYS_INT_PENDING_CLEAR_PCI 0x10 -#define PCI_IOTLB_CONTROL 0x84 /* 8 bits */ -#define PCI_INT_SELECT_LO 0x88 /* 16 bits */ -#define PCI_ARBITRATION_SELECT 0x8a /* 16 bits */ -#define PCI_INT_SELECT_HI 0x8c /* 16 bits */ -#define PCI_HW_INT_OUTPUT 0x8e /* 16 bits */ -#define PCI_IOTLB_RAM_INPUT 0x90 /* 32 bits */ -#define PCI_IOTLB_CAM_INPUT 0x94 /* 32 bits */ -#define PCI_IOTLB_RAM_OUTPUT 0x98 /* 32 bits */ -#define PCI_IOTLB_CAM_OUTPUT 0x9c /* 32 bits */ -#define PCI_SMBAR0 0xa0 /* 8 bits */ -#define PCI_MSIZE0 0xa1 /* 8 bits */ -#define PCI_PMBAR0 0xa2 /* 8 bits */ -#define PCI_SMBAR1 0xa4 /* 8 bits */ -#define PCI_MSIZE1 0xa5 /* 8 bits */ -#define PCI_PMBAR1 0xa6 /* 8 bits */ -#define PCI_SIBAR 0xa8 /* 8 bits */ -#define PCI_SIBAR_ADDRESS_MASK 0xf -#define PCI_ISIZE 0xa9 /* 8 bits */ -#define PCI_ISIZE_16M 0xf -#define PCI_ISIZE_32M 0xe -#define PCI_ISIZE_64M 0xc -#define PCI_ISIZE_128M 0x8 -#define PCI_ISIZE_256M 0x0 -#define PCI_PIBAR 0xaa /* 8 bits */ -#define PCI_CPU_COUNTER_LIMIT_HI 0xac /* 32 bits */ -#define PCI_CPU_COUNTER_LIMIT_LO 0xb0 /* 32 bits */ -#define PCI_CPU_COUNTER_LIMIT 0xb4 /* 32 bits */ -#define PCI_SYS_LIMIT 0xb8 /* 32 bits */ -#define PCI_SYS_COUNTER 0xbc /* 32 bits */ -#define PCI_SYS_COUNTER_OVERFLOW (1<<31) /* Limit reached */ -#define PCI_SYS_LIMIT_PSEUDO 0xc0 /* 32 bits */ -#define PCI_USER_TIMER_CONTROL 0xc4 /* 8 bits */ -#define PCI_USER_TIMER_CONFIG 0xc5 /* 8 bits */ -#define PCI_COUNTER_IRQ 0xc6 /* 8 bits */ -#define PCI_COUNTER_IRQ_SET(sys_irq, cpu_irq) ((((sys_irq) & 0xf) << 4) | \ - ((cpu_irq) & 0xf)) -#define PCI_COUNTER_IRQ_SYS(v) (((v) >> 4) & 0xf) -#define PCI_COUNTER_IRQ_CPU(v) ((v) & 0xf) -#define PCI_PIO_ERROR_COMMAND 0xc7 /* 8 bits */ -#define PCI_PIO_ERROR_ADDRESS 0xc8 /* 32 bits */ -#define PCI_IOTLB_ERROR_ADDRESS 0xcc /* 32 bits */ -#define PCI_SYS_STATUS 0xd0 /* 8 bits */ -#define PCI_SYS_STATUS_RESET_ENABLE (1<<0) -#define PCI_SYS_STATUS_RESET (1<<1) -#define PCI_SYS_STATUS_WATCHDOG_RESET (1<<4) -#define PCI_SYS_STATUS_PCI_RESET (1<<5) -#define PCI_SYS_STATUS_PCI_RESET_ENABLE (1<<6) -#define PCI_SYS_STATUS_PCI_SATTELITE_MODE (1<<7) - -#endif /* !(__SPARC_PCIC_H) */ diff --git a/include/asm-sparc/percpu.h b/include/asm-sparc/percpu.h deleted file mode 100644 index 06066a7aaec3..000000000000 --- a/include/asm-sparc/percpu.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ARCH_SPARC_PERCPU__ -#define __ARCH_SPARC_PERCPU__ - -#include <asm-generic/percpu.h> - -#endif /* __ARCH_SPARC_PERCPU__ */ diff --git a/include/asm-sparc/perfctr.h b/include/asm-sparc/perfctr.h deleted file mode 100644 index 836873002b75..000000000000 --- a/include/asm-sparc/perfctr.h +++ /dev/null @@ -1,173 +0,0 @@ -/*---------------------------------------- - PERFORMANCE INSTRUMENTATION - Guillaume Thouvenin 08/10/98 - David S. Miller 10/06/98 - ---------------------------------------*/ -#ifndef PERF_COUNTER_API -#define PERF_COUNTER_API - -/* sys_perfctr() interface. First arg is operation code - * from enumeration below. The meaning of further arguments - * are determined by the operation code. - * - * int sys_perfctr(int opcode, unsigned long arg0, - * unsigned long arg1, unsigned long arg2) - * - * Pointers which are passed by the user are pointers to 64-bit - * integers. - * - * Once enabled, performance counter state is retained until the - * process either exits or performs an exec. That is, performance - * counters remain enabled for fork/clone children. - */ -enum perfctr_opcode { - /* Enable UltraSparc performance counters, ARG0 is pointer - * to 64-bit accumulator for D0 counter in PIC, ARG1 is pointer - * to 64-bit accumulator for D1 counter. ARG2 is a pointer to - * the initial PCR register value to use. - */ - PERFCTR_ON, - - /* Disable UltraSparc performance counters. The PCR is written - * with zero and the user counter accumulator pointers and - * working PCR register value are forgotten. - */ - PERFCTR_OFF, - - /* Add current D0 and D1 PIC values into user pointers given - * in PERFCTR_ON operation. The PIC is cleared before returning. - */ - PERFCTR_READ, - - /* Clear the PIC register. */ - PERFCTR_CLRPIC, - - /* Begin using a new PCR value, the pointer to which is passed - * in ARG0. The PIC is also cleared after the new PCR value is - * written. - */ - PERFCTR_SETPCR, - - /* Store in pointer given in ARG0 the current PCR register value - * being used. - */ - PERFCTR_GETPCR -}; - -/* I don't want the kernel's namespace to be polluted with this - * stuff when this file is included. --DaveM - */ -#ifndef __KERNEL__ - -#define PRIV 0x00000001 -#define SYS 0x00000002 -#define USR 0x00000004 - -/* Pic.S0 Selection Bit Field Encoding, Ultra-I/II */ -#define CYCLE_CNT 0x00000000 -#define INSTR_CNT 0x00000010 -#define DISPATCH0_IC_MISS 0x00000020 -#define DISPATCH0_STOREBUF 0x00000030 -#define IC_REF 0x00000080 -#define DC_RD 0x00000090 -#define DC_WR 0x000000A0 -#define LOAD_USE 0x000000B0 -#define EC_REF 0x000000C0 -#define EC_WRITE_HIT_RDO 0x000000D0 -#define EC_SNOOP_INV 0x000000E0 -#define EC_RD_HIT 0x000000F0 - -/* Pic.S0 Selection Bit Field Encoding, Ultra-III */ -#define US3_CYCLE_CNT 0x00000000 -#define US3_INSTR_CNT 0x00000010 -#define US3_DISPATCH0_IC_MISS 0x00000020 -#define US3_DISPATCH0_BR_TGT 0x00000030 -#define US3_DISPATCH0_2ND_BR 0x00000040 -#define US3_RSTALL_STOREQ 0x00000050 -#define US3_RSTALL_IU_USE 0x00000060 -#define US3_IC_REF 0x00000080 -#define US3_DC_RD 0x00000090 -#define US3_DC_WR 0x000000a0 -#define US3_EC_REF 0x000000c0 -#define US3_EC_WR_HIT_RTO 0x000000d0 -#define US3_EC_SNOOP_INV 0x000000e0 -#define US3_EC_RD_MISS 0x000000f0 -#define US3_PC_PORT0_RD 0x00000100 -#define US3_SI_SNOOP 0x00000110 -#define US3_SI_CIQ_FLOW 0x00000120 -#define US3_SI_OWNED 0x00000130 -#define US3_SW_COUNT_0 0x00000140 -#define US3_IU_BR_MISS_TAKEN 0x00000150 -#define US3_IU_BR_COUNT_TAKEN 0x00000160 -#define US3_DISP_RS_MISPRED 0x00000170 -#define US3_FA_PIPE_COMPL 0x00000180 -#define US3_MC_READS_0 0x00000200 -#define US3_MC_READS_1 0x00000210 -#define US3_MC_READS_2 0x00000220 -#define US3_MC_READS_3 0x00000230 -#define US3_MC_STALLS_0 0x00000240 -#define US3_MC_STALLS_2 0x00000250 - -/* Pic.S1 Selection Bit Field Encoding, Ultra-I/II */ -#define CYCLE_CNT_D1 0x00000000 -#define INSTR_CNT_D1 0x00000800 -#define DISPATCH0_IC_MISPRED 0x00001000 -#define DISPATCH0_FP_USE 0x00001800 -#define IC_HIT 0x00004000 -#define DC_RD_HIT 0x00004800 -#define DC_WR_HIT 0x00005000 -#define LOAD_USE_RAW 0x00005800 -#define EC_HIT 0x00006000 -#define EC_WB 0x00006800 -#define EC_SNOOP_CB 0x00007000 -#define EC_IT_HIT 0x00007800 - -/* Pic.S1 Selection Bit Field Encoding, Ultra-III */ -#define US3_CYCLE_CNT_D1 0x00000000 -#define US3_INSTR_CNT_D1 0x00000800 -#define US3_DISPATCH0_MISPRED 0x00001000 -#define US3_IC_MISS_CANCELLED 0x00001800 -#define US3_RE_ENDIAN_MISS 0x00002000 -#define US3_RE_FPU_BYPASS 0x00002800 -#define US3_RE_DC_MISS 0x00003000 -#define US3_RE_EC_MISS 0x00003800 -#define US3_IC_MISS 0x00004000 -#define US3_DC_RD_MISS 0x00004800 -#define US3_DC_WR_MISS 0x00005000 -#define US3_RSTALL_FP_USE 0x00005800 -#define US3_EC_MISSES 0x00006000 -#define US3_EC_WB 0x00006800 -#define US3_EC_SNOOP_CB 0x00007000 -#define US3_EC_IC_MISS 0x00007800 -#define US3_RE_PC_MISS 0x00008000 -#define US3_ITLB_MISS 0x00008800 -#define US3_DTLB_MISS 0x00009000 -#define US3_WC_MISS 0x00009800 -#define US3_WC_SNOOP_CB 0x0000a000 -#define US3_WC_SCRUBBED 0x0000a800 -#define US3_WC_WB_WO_READ 0x0000b000 -#define US3_PC_SOFT_HIT 0x0000c000 -#define US3_PC_SNOOP_INV 0x0000c800 -#define US3_PC_HARD_HIT 0x0000d000 -#define US3_PC_PORT1_RD 0x0000d800 -#define US3_SW_COUNT_1 0x0000e000 -#define US3_IU_STAT_BR_MIS_UNTAKEN 0x0000e800 -#define US3_IU_STAT_BR_COUNT_UNTAKEN 0x0000f000 -#define US3_PC_MS_MISSES 0x0000f800 -#define US3_MC_WRITES_0 0x00010800 -#define US3_MC_WRITES_1 0x00011000 -#define US3_MC_WRITES_2 0x00011800 -#define US3_MC_WRITES_3 0x00012000 -#define US3_MC_STALLS_1 0x00012800 -#define US3_MC_STALLS_3 0x00013000 -#define US3_RE_RAW_MISS 0x00013800 -#define US3_FM_PIPE_COMPLETION 0x00014000 - -struct vcounter_struct { - unsigned long long vcnt0; - unsigned long long vcnt1; -}; - -#endif /* !(__KERNEL__) */ - -#endif /* !(PERF_COUNTER_API) */ diff --git a/include/asm-sparc/pgalloc.h b/include/asm-sparc/pgalloc.h deleted file mode 100644 index 681582d26969..000000000000 --- a/include/asm-sparc/pgalloc.h +++ /dev/null @@ -1,68 +0,0 @@ -#ifndef _SPARC_PGALLOC_H -#define _SPARC_PGALLOC_H - -#include <linux/kernel.h> -#include <linux/sched.h> - -#include <asm/page.h> -#include <asm/btfixup.h> - -struct page; - -extern struct pgtable_cache_struct { - unsigned long *pgd_cache; - unsigned long *pte_cache; - unsigned long pgtable_cache_sz; - unsigned long pgd_cache_sz; -} pgt_quicklists; -#define pgd_quicklist (pgt_quicklists.pgd_cache) -#define pmd_quicklist ((unsigned long *)0) -#define pte_quicklist (pgt_quicklists.pte_cache) -#define pgtable_cache_size (pgt_quicklists.pgtable_cache_sz) -#define pgd_cache_size (pgt_quicklists.pgd_cache_sz) - -extern void check_pgt_cache(void); -BTFIXUPDEF_CALL(void, do_check_pgt_cache, int, int) -#define do_check_pgt_cache(low,high) BTFIXUP_CALL(do_check_pgt_cache)(low,high) - -BTFIXUPDEF_CALL(pgd_t *, get_pgd_fast, void) -#define get_pgd_fast() BTFIXUP_CALL(get_pgd_fast)() - -BTFIXUPDEF_CALL(void, free_pgd_fast, pgd_t *) -#define free_pgd_fast(pgd) BTFIXUP_CALL(free_pgd_fast)(pgd) - -#define pgd_free(mm, pgd) free_pgd_fast(pgd) -#define pgd_alloc(mm) get_pgd_fast() - -BTFIXUPDEF_CALL(void, pgd_set, pgd_t *, pmd_t *) -#define pgd_set(pgdp,pmdp) BTFIXUP_CALL(pgd_set)(pgdp,pmdp) -#define pgd_populate(MM, PGD, PMD) pgd_set(PGD, PMD) - -BTFIXUPDEF_CALL(pmd_t *, pmd_alloc_one, struct mm_struct *, unsigned long) -#define pmd_alloc_one(mm, address) BTFIXUP_CALL(pmd_alloc_one)(mm, address) - -BTFIXUPDEF_CALL(void, free_pmd_fast, pmd_t *) -#define free_pmd_fast(pmd) BTFIXUP_CALL(free_pmd_fast)(pmd) - -#define pmd_free(mm, pmd) free_pmd_fast(pmd) -#define __pmd_free_tlb(tlb, pmd) pmd_free((tlb)->mm, pmd) - -BTFIXUPDEF_CALL(void, pmd_populate, pmd_t *, struct page *) -#define pmd_populate(MM, PMD, PTE) BTFIXUP_CALL(pmd_populate)(PMD, PTE) -#define pmd_pgtable(pmd) pmd_page(pmd) -BTFIXUPDEF_CALL(void, pmd_set, pmd_t *, pte_t *) -#define pmd_populate_kernel(MM, PMD, PTE) BTFIXUP_CALL(pmd_set)(PMD, PTE) - -BTFIXUPDEF_CALL(pgtable_t , pte_alloc_one, struct mm_struct *, unsigned long) -#define pte_alloc_one(mm, address) BTFIXUP_CALL(pte_alloc_one)(mm, address) -BTFIXUPDEF_CALL(pte_t *, pte_alloc_one_kernel, struct mm_struct *, unsigned long) -#define pte_alloc_one_kernel(mm, addr) BTFIXUP_CALL(pte_alloc_one_kernel)(mm, addr) - -BTFIXUPDEF_CALL(void, free_pte_fast, pte_t *) -#define pte_free_kernel(mm, pte) BTFIXUP_CALL(free_pte_fast)(pte) - -BTFIXUPDEF_CALL(void, pte_free, pgtable_t ) -#define pte_free(mm, pte) BTFIXUP_CALL(pte_free)(pte) -#define __pte_free_tlb(tlb, pte) pte_free((tlb)->mm, pte) - -#endif /* _SPARC_PGALLOC_H */ diff --git a/include/asm-sparc/pgtable.h b/include/asm-sparc/pgtable.h deleted file mode 100644 index 60512296b2ca..000000000000 --- a/include/asm-sparc/pgtable.h +++ /dev/null @@ -1,475 +0,0 @@ -#ifndef _SPARC_PGTABLE_H -#define _SPARC_PGTABLE_H - -/* asm-sparc/pgtable.h: Defines and functions used to work - * with Sparc page tables. - * - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - * Copyright (C) 1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz) - */ - -#include <asm-generic/4level-fixup.h> - -#include <linux/spinlock.h> -#include <linux/swap.h> -#include <asm/types.h> -#ifdef CONFIG_SUN4 -#include <asm/pgtsun4.h> -#else -#include <asm/pgtsun4c.h> -#endif -#include <asm/pgtsrmmu.h> -#include <asm/vac-ops.h> -#include <asm/oplib.h> -#include <asm/btfixup.h> -#include <asm/system.h> - -#ifndef __ASSEMBLY__ - -struct vm_area_struct; -struct page; - -extern void load_mmu(void); -extern unsigned long calc_highpages(void); - -BTFIXUPDEF_SIMM13(pgdir_shift) -BTFIXUPDEF_SETHI(pgdir_size) -BTFIXUPDEF_SETHI(pgdir_mask) - -BTFIXUPDEF_SIMM13(ptrs_per_pmd) -BTFIXUPDEF_SIMM13(ptrs_per_pgd) -BTFIXUPDEF_SIMM13(user_ptrs_per_pgd) - -#define pte_ERROR(e) __builtin_trap() -#define pmd_ERROR(e) __builtin_trap() -#define pgd_ERROR(e) __builtin_trap() - -BTFIXUPDEF_INT(page_none) -BTFIXUPDEF_INT(page_copy) -BTFIXUPDEF_INT(page_readonly) -BTFIXUPDEF_INT(page_kernel) - -#define PMD_SHIFT SUN4C_PMD_SHIFT -#define PMD_SIZE (1UL << PMD_SHIFT) -#define PMD_MASK (~(PMD_SIZE-1)) -#define PMD_ALIGN(__addr) (((__addr) + ~PMD_MASK) & PMD_MASK) -#define PGDIR_SHIFT BTFIXUP_SIMM13(pgdir_shift) -#define PGDIR_SIZE BTFIXUP_SETHI(pgdir_size) -#define PGDIR_MASK BTFIXUP_SETHI(pgdir_mask) -#define PTRS_PER_PTE 1024 -#define PTRS_PER_PMD BTFIXUP_SIMM13(ptrs_per_pmd) -#define PTRS_PER_PGD BTFIXUP_SIMM13(ptrs_per_pgd) -#define USER_PTRS_PER_PGD BTFIXUP_SIMM13(user_ptrs_per_pgd) -#define FIRST_USER_ADDRESS 0 -#define PTE_SIZE (PTRS_PER_PTE*4) - -#define PAGE_NONE __pgprot(BTFIXUP_INT(page_none)) -extern pgprot_t PAGE_SHARED; -#define PAGE_COPY __pgprot(BTFIXUP_INT(page_copy)) -#define PAGE_READONLY __pgprot(BTFIXUP_INT(page_readonly)) - -extern unsigned long page_kernel; - -#ifdef MODULE -#define PAGE_KERNEL page_kernel -#else -#define PAGE_KERNEL __pgprot(BTFIXUP_INT(page_kernel)) -#endif - -/* Top-level page directory */ -extern pgd_t swapper_pg_dir[1024]; - -extern void paging_init(void); - -/* Page table for 0-4MB for everybody, on the Sparc this - * holds the same as on the i386. - */ -extern pte_t pg0[1024]; -extern pte_t pg1[1024]; -extern pte_t pg2[1024]; -extern pte_t pg3[1024]; - -extern unsigned long ptr_in_current_pgd; - -/* Here is a trick, since mmap.c need the initializer elements for - * protection_map[] to be constant at compile time, I set the following - * to all zeros. I set it to the real values after I link in the - * appropriate MMU page table routines at boot time. - */ -#define __P000 __pgprot(0) -#define __P001 __pgprot(0) -#define __P010 __pgprot(0) -#define __P011 __pgprot(0) -#define __P100 __pgprot(0) -#define __P101 __pgprot(0) -#define __P110 __pgprot(0) -#define __P111 __pgprot(0) - -#define __S000 __pgprot(0) -#define __S001 __pgprot(0) -#define __S010 __pgprot(0) -#define __S011 __pgprot(0) -#define __S100 __pgprot(0) -#define __S101 __pgprot(0) -#define __S110 __pgprot(0) -#define __S111 __pgprot(0) - -extern int num_contexts; - -/* First physical page can be anywhere, the following is needed so that - * va-->pa and vice versa conversions work properly without performance - * hit for all __pa()/__va() operations. - */ -extern unsigned long phys_base; -extern unsigned long pfn_base; - -/* - * BAD_PAGETABLE is used when we need a bogus page-table, while - * BAD_PAGE is used for a bogus page. - * - * ZERO_PAGE is a global shared page that is always zero: used - * for zero-mapped memory areas etc.. - */ -extern pte_t * __bad_pagetable(void); -extern pte_t __bad_page(void); -extern unsigned long empty_zero_page; - -#define BAD_PAGETABLE __bad_pagetable() -#define BAD_PAGE __bad_page() -#define ZERO_PAGE(vaddr) (virt_to_page(&empty_zero_page)) - -/* - */ -BTFIXUPDEF_CALL_CONST(struct page *, pmd_page, pmd_t) -BTFIXUPDEF_CALL_CONST(unsigned long, pgd_page_vaddr, pgd_t) - -#define pmd_page(pmd) BTFIXUP_CALL(pmd_page)(pmd) -#define pgd_page_vaddr(pgd) BTFIXUP_CALL(pgd_page_vaddr)(pgd) - -BTFIXUPDEF_SETHI(none_mask) -BTFIXUPDEF_CALL_CONST(int, pte_present, pte_t) -BTFIXUPDEF_CALL(void, pte_clear, pte_t *) - -static inline int pte_none(pte_t pte) -{ - return !(pte_val(pte) & ~BTFIXUP_SETHI(none_mask)); -} - -#define pte_present(pte) BTFIXUP_CALL(pte_present)(pte) -#define pte_clear(mm,addr,pte) BTFIXUP_CALL(pte_clear)(pte) - -BTFIXUPDEF_CALL_CONST(int, pmd_bad, pmd_t) -BTFIXUPDEF_CALL_CONST(int, pmd_present, pmd_t) -BTFIXUPDEF_CALL(void, pmd_clear, pmd_t *) - -static inline int pmd_none(pmd_t pmd) -{ - return !(pmd_val(pmd) & ~BTFIXUP_SETHI(none_mask)); -} - -#define pmd_bad(pmd) BTFIXUP_CALL(pmd_bad)(pmd) -#define pmd_present(pmd) BTFIXUP_CALL(pmd_present)(pmd) -#define pmd_clear(pmd) BTFIXUP_CALL(pmd_clear)(pmd) - -BTFIXUPDEF_CALL_CONST(int, pgd_none, pgd_t) -BTFIXUPDEF_CALL_CONST(int, pgd_bad, pgd_t) -BTFIXUPDEF_CALL_CONST(int, pgd_present, pgd_t) -BTFIXUPDEF_CALL(void, pgd_clear, pgd_t *) - -#define pgd_none(pgd) BTFIXUP_CALL(pgd_none)(pgd) -#define pgd_bad(pgd) BTFIXUP_CALL(pgd_bad)(pgd) -#define pgd_present(pgd) BTFIXUP_CALL(pgd_present)(pgd) -#define pgd_clear(pgd) BTFIXUP_CALL(pgd_clear)(pgd) - -/* - * The following only work if pte_present() is true. - * Undefined behaviour if not.. - */ -BTFIXUPDEF_HALF(pte_writei) -BTFIXUPDEF_HALF(pte_dirtyi) -BTFIXUPDEF_HALF(pte_youngi) - -static int pte_write(pte_t pte) __attribute_const__; -static inline int pte_write(pte_t pte) -{ - return pte_val(pte) & BTFIXUP_HALF(pte_writei); -} - -static int pte_dirty(pte_t pte) __attribute_const__; -static inline int pte_dirty(pte_t pte) -{ - return pte_val(pte) & BTFIXUP_HALF(pte_dirtyi); -} - -static int pte_young(pte_t pte) __attribute_const__; -static inline int pte_young(pte_t pte) -{ - return pte_val(pte) & BTFIXUP_HALF(pte_youngi); -} - -/* - * The following only work if pte_present() is not true. - */ -BTFIXUPDEF_HALF(pte_filei) - -static int pte_file(pte_t pte) __attribute_const__; -static inline int pte_file(pte_t pte) -{ - return pte_val(pte) & BTFIXUP_HALF(pte_filei); -} - -static inline int pte_special(pte_t pte) -{ - return 0; -} - -/* - */ -BTFIXUPDEF_HALF(pte_wrprotecti) -BTFIXUPDEF_HALF(pte_mkcleani) -BTFIXUPDEF_HALF(pte_mkoldi) - -static pte_t pte_wrprotect(pte_t pte) __attribute_const__; -static inline pte_t pte_wrprotect(pte_t pte) -{ - return __pte(pte_val(pte) & ~BTFIXUP_HALF(pte_wrprotecti)); -} - -static pte_t pte_mkclean(pte_t pte) __attribute_const__; -static inline pte_t pte_mkclean(pte_t pte) -{ - return __pte(pte_val(pte) & ~BTFIXUP_HALF(pte_mkcleani)); -} - -static pte_t pte_mkold(pte_t pte) __attribute_const__; -static inline pte_t pte_mkold(pte_t pte) -{ - return __pte(pte_val(pte) & ~BTFIXUP_HALF(pte_mkoldi)); -} - -BTFIXUPDEF_CALL_CONST(pte_t, pte_mkwrite, pte_t) -BTFIXUPDEF_CALL_CONST(pte_t, pte_mkdirty, pte_t) -BTFIXUPDEF_CALL_CONST(pte_t, pte_mkyoung, pte_t) - -#define pte_mkwrite(pte) BTFIXUP_CALL(pte_mkwrite)(pte) -#define pte_mkdirty(pte) BTFIXUP_CALL(pte_mkdirty)(pte) -#define pte_mkyoung(pte) BTFIXUP_CALL(pte_mkyoung)(pte) - -#define pte_mkspecial(pte) (pte) - -#define pfn_pte(pfn, prot) mk_pte(pfn_to_page(pfn), prot) - -BTFIXUPDEF_CALL(unsigned long, pte_pfn, pte_t) -#define pte_pfn(pte) BTFIXUP_CALL(pte_pfn)(pte) -#define pte_page(pte) pfn_to_page(pte_pfn(pte)) - -/* - * Conversion functions: convert a page and protection to a page entry, - * and a page entry and page directory to the page they refer to. - */ -BTFIXUPDEF_CALL_CONST(pte_t, mk_pte, struct page *, pgprot_t) - -BTFIXUPDEF_CALL_CONST(pte_t, mk_pte_phys, unsigned long, pgprot_t) -BTFIXUPDEF_CALL_CONST(pte_t, mk_pte_io, unsigned long, pgprot_t, int) -BTFIXUPDEF_CALL_CONST(pgprot_t, pgprot_noncached, pgprot_t) - -#define mk_pte(page,pgprot) BTFIXUP_CALL(mk_pte)(page,pgprot) -#define mk_pte_phys(page,pgprot) BTFIXUP_CALL(mk_pte_phys)(page,pgprot) -#define mk_pte_io(page,pgprot,space) BTFIXUP_CALL(mk_pte_io)(page,pgprot,space) - -#define pgprot_noncached(pgprot) BTFIXUP_CALL(pgprot_noncached)(pgprot) - -BTFIXUPDEF_INT(pte_modify_mask) - -static pte_t pte_modify(pte_t pte, pgprot_t newprot) __attribute_const__; -static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) -{ - return __pte((pte_val(pte) & BTFIXUP_INT(pte_modify_mask)) | - pgprot_val(newprot)); -} - -#define pgd_index(address) ((address) >> PGDIR_SHIFT) - -/* to find an entry in a page-table-directory */ -#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address)) - -/* to find an entry in a kernel page-table-directory */ -#define pgd_offset_k(address) pgd_offset(&init_mm, address) - -/* Find an entry in the second-level page table.. */ -BTFIXUPDEF_CALL(pmd_t *, pmd_offset, pgd_t *, unsigned long) -#define pmd_offset(dir,addr) BTFIXUP_CALL(pmd_offset)(dir,addr) - -/* Find an entry in the third-level page table.. */ -BTFIXUPDEF_CALL(pte_t *, pte_offset_kernel, pmd_t *, unsigned long) -#define pte_offset_kernel(dir,addr) BTFIXUP_CALL(pte_offset_kernel)(dir,addr) - -/* - * This shortcut works on sun4m (and sun4d) because the nocache area is static, - * and sun4c is guaranteed to have no highmem anyway. - */ -#define pte_offset_map(d, a) pte_offset_kernel(d,a) -#define pte_offset_map_nested(d, a) pte_offset_kernel(d,a) - -#define pte_unmap(pte) do{}while(0) -#define pte_unmap_nested(pte) do{}while(0) - -/* Certain architectures need to do special things when pte's - * within a page table are directly modified. Thus, the following - * hook is made available. - */ - -BTFIXUPDEF_CALL(void, set_pte, pte_t *, pte_t) - -#define set_pte(ptep,pteval) BTFIXUP_CALL(set_pte)(ptep,pteval) -#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval) - -struct seq_file; -BTFIXUPDEF_CALL(void, mmu_info, struct seq_file *) - -#define mmu_info(p) BTFIXUP_CALL(mmu_info)(p) - -/* Fault handler stuff... */ -#define FAULT_CODE_PROT 0x1 -#define FAULT_CODE_WRITE 0x2 -#define FAULT_CODE_USER 0x4 - -BTFIXUPDEF_CALL(void, update_mmu_cache, struct vm_area_struct *, unsigned long, pte_t) - -#define update_mmu_cache(vma,addr,pte) BTFIXUP_CALL(update_mmu_cache)(vma,addr,pte) - -BTFIXUPDEF_CALL(void, sparc_mapiorange, unsigned int, unsigned long, - unsigned long, unsigned int) -BTFIXUPDEF_CALL(void, sparc_unmapiorange, unsigned long, unsigned int) -#define sparc_mapiorange(bus,pa,va,len) BTFIXUP_CALL(sparc_mapiorange)(bus,pa,va,len) -#define sparc_unmapiorange(va,len) BTFIXUP_CALL(sparc_unmapiorange)(va,len) - -extern int invalid_segment; - -/* Encode and de-code a swap entry */ -BTFIXUPDEF_CALL(unsigned long, __swp_type, swp_entry_t) -BTFIXUPDEF_CALL(unsigned long, __swp_offset, swp_entry_t) -BTFIXUPDEF_CALL(swp_entry_t, __swp_entry, unsigned long, unsigned long) - -#define __swp_type(__x) BTFIXUP_CALL(__swp_type)(__x) -#define __swp_offset(__x) BTFIXUP_CALL(__swp_offset)(__x) -#define __swp_entry(__type,__off) BTFIXUP_CALL(__swp_entry)(__type,__off) - -#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) -#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) - -/* file-offset-in-pte helpers */ -BTFIXUPDEF_CALL(unsigned long, pte_to_pgoff, pte_t pte); -BTFIXUPDEF_CALL(pte_t, pgoff_to_pte, unsigned long pgoff); - -#define pte_to_pgoff(pte) BTFIXUP_CALL(pte_to_pgoff)(pte) -#define pgoff_to_pte(off) BTFIXUP_CALL(pgoff_to_pte)(off) - -/* - * This is made a constant because mm/fremap.c required a constant. - * Note that layout of these bits is different between sun4c.c and srmmu.c. - */ -#define PTE_FILE_MAX_BITS 24 - -/* - */ -struct ctx_list { - struct ctx_list *next; - struct ctx_list *prev; - unsigned int ctx_number; - struct mm_struct *ctx_mm; -}; - -extern struct ctx_list *ctx_list_pool; /* Dynamically allocated */ -extern struct ctx_list ctx_free; /* Head of free list */ -extern struct ctx_list ctx_used; /* Head of used contexts list */ - -#define NO_CONTEXT -1 - -static inline void remove_from_ctx_list(struct ctx_list *entry) -{ - entry->next->prev = entry->prev; - entry->prev->next = entry->next; -} - -static inline void add_to_ctx_list(struct ctx_list *head, struct ctx_list *entry) -{ - entry->next = head; - (entry->prev = head->prev)->next = entry; - head->prev = entry; -} -#define add_to_free_ctxlist(entry) add_to_ctx_list(&ctx_free, entry) -#define add_to_used_ctxlist(entry) add_to_ctx_list(&ctx_used, entry) - -static inline unsigned long -__get_phys (unsigned long addr) -{ - switch (sparc_cpu_model){ - case sun4: - case sun4c: - return sun4c_get_pte (addr) << PAGE_SHIFT; - case sun4m: - case sun4d: - return ((srmmu_get_pte (addr) & 0xffffff00) << 4); - default: - return 0; - } -} - -static inline int -__get_iospace (unsigned long addr) -{ - switch (sparc_cpu_model){ - case sun4: - case sun4c: - return -1; /* Don't check iospace on sun4c */ - case sun4m: - case sun4d: - return (srmmu_get_pte (addr) >> 28); - default: - return -1; - } -} - -extern unsigned long *sparc_valid_addr_bitmap; - -/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */ -#define kern_addr_valid(addr) \ - (test_bit(__pa((unsigned long)(addr))>>20, sparc_valid_addr_bitmap)) - -extern int io_remap_pfn_range(struct vm_area_struct *vma, - unsigned long from, unsigned long pfn, - unsigned long size, pgprot_t prot); - -/* - * For sparc32&64, the pfn in io_remap_pfn_range() carries <iospace> in - * its high 4 bits. These macros/functions put it there or get it from there. - */ -#define MK_IOSPACE_PFN(space, pfn) (pfn | (space << (BITS_PER_LONG - 4))) -#define GET_IOSPACE(pfn) (pfn >> (BITS_PER_LONG - 4)) -#define GET_PFN(pfn) (pfn & 0x0fffffffUL) - -#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS -#define ptep_set_access_flags(__vma, __address, __ptep, __entry, __dirty) \ -({ \ - int __changed = !pte_same(*(__ptep), __entry); \ - if (__changed) { \ - set_pte_at((__vma)->vm_mm, (__address), __ptep, __entry); \ - flush_tlb_page(__vma, __address); \ - } \ - (sparc_cpu_model == sun4c) || __changed; \ -}) - -#include <asm-generic/pgtable.h> - -#endif /* !(__ASSEMBLY__) */ - -/* We provide our own get_unmapped_area to cope with VA holes for userland */ -#define HAVE_ARCH_UNMAPPED_AREA - -/* - * No page table caches to initialise - */ -#define pgtable_cache_init() do { } while (0) - -#endif /* !(_SPARC_PGTABLE_H) */ diff --git a/include/asm-sparc/pgtsrmmu.h b/include/asm-sparc/pgtsrmmu.h deleted file mode 100644 index 808555fc1d58..000000000000 --- a/include/asm-sparc/pgtsrmmu.h +++ /dev/null @@ -1,298 +0,0 @@ -/* - * pgtsrmmu.h: SRMMU page table defines and code. - * - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - */ - -#ifndef _SPARC_PGTSRMMU_H -#define _SPARC_PGTSRMMU_H - -#include <asm/page.h> - -#ifdef __ASSEMBLY__ -#include <asm/thread_info.h> /* TI_UWINMASK for WINDOW_FLUSH */ -#endif - -/* Number of contexts is implementation-dependent; 64k is the most we support */ -#define SRMMU_MAX_CONTEXTS 65536 - -/* PMD_SHIFT determines the size of the area a second-level page table entry can map */ -#define SRMMU_REAL_PMD_SHIFT 18 -#define SRMMU_REAL_PMD_SIZE (1UL << SRMMU_REAL_PMD_SHIFT) -#define SRMMU_REAL_PMD_MASK (~(SRMMU_REAL_PMD_SIZE-1)) -#define SRMMU_REAL_PMD_ALIGN(__addr) (((__addr)+SRMMU_REAL_PMD_SIZE-1)&SRMMU_REAL_PMD_MASK) - -/* PGDIR_SHIFT determines what a third-level page table entry can map */ -#define SRMMU_PGDIR_SHIFT 24 -#define SRMMU_PGDIR_SIZE (1UL << SRMMU_PGDIR_SHIFT) -#define SRMMU_PGDIR_MASK (~(SRMMU_PGDIR_SIZE-1)) -#define SRMMU_PGDIR_ALIGN(addr) (((addr)+SRMMU_PGDIR_SIZE-1)&SRMMU_PGDIR_MASK) - -#define SRMMU_REAL_PTRS_PER_PTE 64 -#define SRMMU_REAL_PTRS_PER_PMD 64 -#define SRMMU_PTRS_PER_PGD 256 - -#define SRMMU_REAL_PTE_TABLE_SIZE (SRMMU_REAL_PTRS_PER_PTE*4) -#define SRMMU_PMD_TABLE_SIZE (SRMMU_REAL_PTRS_PER_PMD*4) -#define SRMMU_PGD_TABLE_SIZE (SRMMU_PTRS_PER_PGD*4) - -/* - * To support pagetables in highmem, Linux introduces APIs which - * return struct page* and generally manipulate page tables when - * they are not mapped into kernel space. Our hardware page tables - * are smaller than pages. We lump hardware tabes into big, page sized - * software tables. - * - * PMD_SHIFT determines the size of the area a second-level page table entry - * can map, and our pmd_t is 16 times larger than normal. The values which - * were once defined here are now generic for 4c and srmmu, so they're - * found in pgtable.h. - */ -#define SRMMU_PTRS_PER_PMD 4 - -/* Definition of the values in the ET field of PTD's and PTE's */ -#define SRMMU_ET_MASK 0x3 -#define SRMMU_ET_INVALID 0x0 -#define SRMMU_ET_PTD 0x1 -#define SRMMU_ET_PTE 0x2 -#define SRMMU_ET_REPTE 0x3 /* AIEEE, SuperSparc II reverse endian page! */ - -/* Physical page extraction from PTP's and PTE's. */ -#define SRMMU_CTX_PMASK 0xfffffff0 -#define SRMMU_PTD_PMASK 0xfffffff0 -#define SRMMU_PTE_PMASK 0xffffff00 - -/* The pte non-page bits. Some notes: - * 1) cache, dirty, valid, and ref are frobbable - * for both supervisor and user pages. - * 2) exec and write will only give the desired effect - * on user pages - * 3) use priv and priv_readonly for changing the - * characteristics of supervisor ptes - */ -#define SRMMU_CACHE 0x80 -#define SRMMU_DIRTY 0x40 -#define SRMMU_REF 0x20 -#define SRMMU_NOREAD 0x10 -#define SRMMU_EXEC 0x08 -#define SRMMU_WRITE 0x04 -#define SRMMU_VALID 0x02 /* SRMMU_ET_PTE */ -#define SRMMU_PRIV 0x1c -#define SRMMU_PRIV_RDONLY 0x18 - -#define SRMMU_FILE 0x40 /* Implemented in software */ - -#define SRMMU_PTE_FILE_SHIFT 8 /* == 32-PTE_FILE_MAX_BITS */ - -#define SRMMU_CHG_MASK (0xffffff00 | SRMMU_REF | SRMMU_DIRTY) - -/* SRMMU swap entry encoding - * - * We use 5 bits for the type and 19 for the offset. This gives us - * 32 swapfiles of 4GB each. Encoding looks like: - * - * oooooooooooooooooootttttRRRRRRRR - * fedcba9876543210fedcba9876543210 - * - * The bottom 8 bits are reserved for protection and status bits, especially - * FILE and PRESENT. - */ -#define SRMMU_SWP_TYPE_MASK 0x1f -#define SRMMU_SWP_TYPE_SHIFT SRMMU_PTE_FILE_SHIFT -#define SRMMU_SWP_OFF_MASK 0x7ffff -#define SRMMU_SWP_OFF_SHIFT (SRMMU_PTE_FILE_SHIFT + 5) - -/* Some day I will implement true fine grained access bits for - * user pages because the SRMMU gives us the capabilities to - * enforce all the protection levels that vma's can have. - * XXX But for now... - */ -#define SRMMU_PAGE_NONE __pgprot(SRMMU_CACHE | \ - SRMMU_PRIV | SRMMU_REF) -#define SRMMU_PAGE_SHARED __pgprot(SRMMU_VALID | SRMMU_CACHE | \ - SRMMU_EXEC | SRMMU_WRITE | SRMMU_REF) -#define SRMMU_PAGE_COPY __pgprot(SRMMU_VALID | SRMMU_CACHE | \ - SRMMU_EXEC | SRMMU_REF) -#define SRMMU_PAGE_RDONLY __pgprot(SRMMU_VALID | SRMMU_CACHE | \ - SRMMU_EXEC | SRMMU_REF) -#define SRMMU_PAGE_KERNEL __pgprot(SRMMU_VALID | SRMMU_CACHE | SRMMU_PRIV | \ - SRMMU_DIRTY | SRMMU_REF) - -/* SRMMU Register addresses in ASI 0x4. These are valid for all - * current SRMMU implementations that exist. - */ -#define SRMMU_CTRL_REG 0x00000000 -#define SRMMU_CTXTBL_PTR 0x00000100 -#define SRMMU_CTX_REG 0x00000200 -#define SRMMU_FAULT_STATUS 0x00000300 -#define SRMMU_FAULT_ADDR 0x00000400 - -#define WINDOW_FLUSH(tmp1, tmp2) \ - mov 0, tmp1; \ -98: ld [%g6 + TI_UWINMASK], tmp2; \ - orcc %g0, tmp2, %g0; \ - add tmp1, 1, tmp1; \ - bne 98b; \ - save %sp, -64, %sp; \ -99: subcc tmp1, 1, tmp1; \ - bne 99b; \ - restore %g0, %g0, %g0; - -#ifndef __ASSEMBLY__ - -/* This makes sense. Honest it does - Anton */ -/* XXX Yes but it's ugly as sin. FIXME. -KMW */ -extern void *srmmu_nocache_pool; -#define __nocache_pa(VADDR) (((unsigned long)VADDR) - SRMMU_NOCACHE_VADDR + __pa((unsigned long)srmmu_nocache_pool)) -#define __nocache_va(PADDR) (__va((unsigned long)PADDR) - (unsigned long)srmmu_nocache_pool + SRMMU_NOCACHE_VADDR) -#define __nocache_fix(VADDR) __va(__nocache_pa(VADDR)) - -/* Accessing the MMU control register. */ -static inline unsigned int srmmu_get_mmureg(void) -{ - unsigned int retval; - __asm__ __volatile__("lda [%%g0] %1, %0\n\t" : - "=r" (retval) : - "i" (ASI_M_MMUREGS)); - return retval; -} - -static inline void srmmu_set_mmureg(unsigned long regval) -{ - __asm__ __volatile__("sta %0, [%%g0] %1\n\t" : : - "r" (regval), "i" (ASI_M_MMUREGS) : "memory"); - -} - -static inline void srmmu_set_ctable_ptr(unsigned long paddr) -{ - paddr = ((paddr >> 4) & SRMMU_CTX_PMASK); - __asm__ __volatile__("sta %0, [%1] %2\n\t" : : - "r" (paddr), "r" (SRMMU_CTXTBL_PTR), - "i" (ASI_M_MMUREGS) : - "memory"); -} - -static inline unsigned long srmmu_get_ctable_ptr(void) -{ - unsigned int retval; - - __asm__ __volatile__("lda [%1] %2, %0\n\t" : - "=r" (retval) : - "r" (SRMMU_CTXTBL_PTR), - "i" (ASI_M_MMUREGS)); - return (retval & SRMMU_CTX_PMASK) << 4; -} - -static inline void srmmu_set_context(int context) -{ - __asm__ __volatile__("sta %0, [%1] %2\n\t" : : - "r" (context), "r" (SRMMU_CTX_REG), - "i" (ASI_M_MMUREGS) : "memory"); -} - -static inline int srmmu_get_context(void) -{ - register int retval; - __asm__ __volatile__("lda [%1] %2, %0\n\t" : - "=r" (retval) : - "r" (SRMMU_CTX_REG), - "i" (ASI_M_MMUREGS)); - return retval; -} - -static inline unsigned int srmmu_get_fstatus(void) -{ - unsigned int retval; - - __asm__ __volatile__("lda [%1] %2, %0\n\t" : - "=r" (retval) : - "r" (SRMMU_FAULT_STATUS), "i" (ASI_M_MMUREGS)); - return retval; -} - -static inline unsigned int srmmu_get_faddr(void) -{ - unsigned int retval; - - __asm__ __volatile__("lda [%1] %2, %0\n\t" : - "=r" (retval) : - "r" (SRMMU_FAULT_ADDR), "i" (ASI_M_MMUREGS)); - return retval; -} - -/* This is guaranteed on all SRMMU's. */ -static inline void srmmu_flush_whole_tlb(void) -{ - __asm__ __volatile__("sta %%g0, [%0] %1\n\t": : - "r" (0x400), /* Flush entire TLB!! */ - "i" (ASI_M_FLUSH_PROBE) : "memory"); - -} - -/* These flush types are not available on all chips... */ -static inline void srmmu_flush_tlb_ctx(void) -{ - __asm__ __volatile__("sta %%g0, [%0] %1\n\t": : - "r" (0x300), /* Flush TLB ctx.. */ - "i" (ASI_M_FLUSH_PROBE) : "memory"); - -} - -static inline void srmmu_flush_tlb_region(unsigned long addr) -{ - addr &= SRMMU_PGDIR_MASK; - __asm__ __volatile__("sta %%g0, [%0] %1\n\t": : - "r" (addr | 0x200), /* Flush TLB region.. */ - "i" (ASI_M_FLUSH_PROBE) : "memory"); - -} - - -static inline void srmmu_flush_tlb_segment(unsigned long addr) -{ - addr &= SRMMU_REAL_PMD_MASK; - __asm__ __volatile__("sta %%g0, [%0] %1\n\t": : - "r" (addr | 0x100), /* Flush TLB segment.. */ - "i" (ASI_M_FLUSH_PROBE) : "memory"); - -} - -static inline void srmmu_flush_tlb_page(unsigned long page) -{ - page &= PAGE_MASK; - __asm__ __volatile__("sta %%g0, [%0] %1\n\t": : - "r" (page), /* Flush TLB page.. */ - "i" (ASI_M_FLUSH_PROBE) : "memory"); - -} - -static inline unsigned long srmmu_hwprobe(unsigned long vaddr) -{ - unsigned long retval; - - vaddr &= PAGE_MASK; - __asm__ __volatile__("lda [%1] %2, %0\n\t" : - "=r" (retval) : - "r" (vaddr | 0x400), "i" (ASI_M_FLUSH_PROBE)); - - return retval; -} - -static inline int -srmmu_get_pte (unsigned long addr) -{ - register unsigned long entry; - - __asm__ __volatile__("\n\tlda [%1] %2,%0\n\t" : - "=r" (entry): - "r" ((addr & 0xfffff000) | 0x400), "i" (ASI_M_FLUSH_PROBE)); - return entry; -} - -extern unsigned long (*srmmu_read_physical)(unsigned long paddr); -extern void (*srmmu_write_physical)(unsigned long paddr, unsigned long word); - -#endif /* !(__ASSEMBLY__) */ - -#endif /* !(_SPARC_PGTSRMMU_H) */ diff --git a/include/asm-sparc/pgtsun4.h b/include/asm-sparc/pgtsun4.h deleted file mode 100644 index 5a0d661fb82e..000000000000 --- a/include/asm-sparc/pgtsun4.h +++ /dev/null @@ -1,171 +0,0 @@ -/* - * pgtsun4.h: Sun4 specific pgtable.h defines and code. - * - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - * Copyright (C) 1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz) - */ -#ifndef _SPARC_PGTSUN4C_H -#define _SPARC_PGTSUN4C_H - -#include <asm/contregs.h> - -/* PMD_SHIFT determines the size of the area a second-level page table can map */ -#define SUN4C_PMD_SHIFT 23 - -/* PGDIR_SHIFT determines what a third-level page table entry can map */ -#define SUN4C_PGDIR_SHIFT 23 -#define SUN4C_PGDIR_SIZE (1UL << SUN4C_PGDIR_SHIFT) -#define SUN4C_PGDIR_MASK (~(SUN4C_PGDIR_SIZE-1)) -#define SUN4C_PGDIR_ALIGN(addr) (((addr)+SUN4C_PGDIR_SIZE-1)&SUN4C_PGDIR_MASK) - -/* To represent how the sun4c mmu really lays things out. */ -#define SUN4C_REAL_PGDIR_SHIFT 18 -#define SUN4C_REAL_PGDIR_SIZE (1UL << SUN4C_REAL_PGDIR_SHIFT) -#define SUN4C_REAL_PGDIR_MASK (~(SUN4C_REAL_PGDIR_SIZE-1)) -#define SUN4C_REAL_PGDIR_ALIGN(addr) (((addr)+SUN4C_REAL_PGDIR_SIZE-1)&SUN4C_REAL_PGDIR_MASK) - -/* 19 bit PFN on sun4 */ -#define SUN4C_PFN_MASK 0x7ffff - -/* Don't increase these unless the structures in sun4c.c are fixed */ -#define SUN4C_MAX_SEGMAPS 256 -#define SUN4C_MAX_CONTEXTS 16 - -/* - * To be efficient, and not have to worry about allocating such - * a huge pgd, we make the kernel sun4c tables each hold 1024 - * entries and the pgd similarly just like the i386 tables. - */ -#define SUN4C_PTRS_PER_PTE 1024 -#define SUN4C_PTRS_PER_PMD 1 -#define SUN4C_PTRS_PER_PGD 1024 - -/* - * Sparc SUN4C pte fields. - */ -#define _SUN4C_PAGE_VALID 0x80000000 -#define _SUN4C_PAGE_SILENT_READ 0x80000000 /* synonym */ -#define _SUN4C_PAGE_DIRTY 0x40000000 -#define _SUN4C_PAGE_SILENT_WRITE 0x40000000 /* synonym */ -#define _SUN4C_PAGE_PRIV 0x20000000 /* privileged page */ -#define _SUN4C_PAGE_NOCACHE 0x10000000 /* non-cacheable page */ -#define _SUN4C_PAGE_PRESENT 0x08000000 /* implemented in software */ -#define _SUN4C_PAGE_IO 0x04000000 /* I/O page */ -#define _SUN4C_PAGE_FILE 0x02000000 /* implemented in software */ -#define _SUN4C_PAGE_READ 0x00800000 /* implemented in software */ -#define _SUN4C_PAGE_WRITE 0x00400000 /* implemented in software */ -#define _SUN4C_PAGE_ACCESSED 0x00200000 /* implemented in software */ -#define _SUN4C_PAGE_MODIFIED 0x00100000 /* implemented in software */ - -#define _SUN4C_READABLE (_SUN4C_PAGE_READ|_SUN4C_PAGE_SILENT_READ|\ - _SUN4C_PAGE_ACCESSED) -#define _SUN4C_WRITEABLE (_SUN4C_PAGE_WRITE|_SUN4C_PAGE_SILENT_WRITE|\ - _SUN4C_PAGE_MODIFIED) - -#define _SUN4C_PAGE_CHG_MASK (0xffff|_SUN4C_PAGE_ACCESSED|_SUN4C_PAGE_MODIFIED) - -#define SUN4C_PAGE_NONE __pgprot(_SUN4C_PAGE_PRESENT) -#define SUN4C_PAGE_SHARED __pgprot(_SUN4C_PAGE_PRESENT|_SUN4C_READABLE|\ - _SUN4C_PAGE_WRITE) -#define SUN4C_PAGE_COPY __pgprot(_SUN4C_PAGE_PRESENT|_SUN4C_READABLE) -#define SUN4C_PAGE_READONLY __pgprot(_SUN4C_PAGE_PRESENT|_SUN4C_READABLE) -#define SUN4C_PAGE_KERNEL __pgprot(_SUN4C_READABLE|_SUN4C_WRITEABLE|\ - _SUN4C_PAGE_DIRTY|_SUN4C_PAGE_PRIV) - -/* SUN4C swap entry encoding - * - * We use 5 bits for the type and 19 for the offset. This gives us - * 32 swapfiles of 4GB each. Encoding looks like: - * - * RRRRRRRRooooooooooooooooooottttt - * fedcba9876543210fedcba9876543210 - * - * The top 8 bits are reserved for protection and status bits, especially - * FILE and PRESENT. - */ -#define SUN4C_SWP_TYPE_MASK 0x1f -#define SUN4C_SWP_OFF_MASK 0x7ffff -#define SUN4C_SWP_OFF_SHIFT 5 - -#ifndef __ASSEMBLY__ - -static inline unsigned long sun4c_get_synchronous_error(void) -{ - unsigned long sync_err; - - __asm__ __volatile__("lda [%1] %2, %0\n\t" : - "=r" (sync_err) : - "r" (AC_SYNC_ERR), "i" (ASI_CONTROL)); - return sync_err; -} - -static inline unsigned long sun4c_get_synchronous_address(void) -{ - unsigned long sync_addr; - - __asm__ __volatile__("lda [%1] %2, %0\n\t" : - "=r" (sync_addr) : - "r" (AC_SYNC_VA), "i" (ASI_CONTROL)); - return sync_addr; -} - -/* SUN4 pte, segmap, and context manipulation */ -static inline unsigned long sun4c_get_segmap(unsigned long addr) -{ - register unsigned long entry; - - __asm__ __volatile__("\n\tlduha [%1] %2, %0\n\t" : - "=r" (entry) : - "r" (addr), "i" (ASI_SEGMAP)); - return entry; -} - -static inline void sun4c_put_segmap(unsigned long addr, unsigned long entry) -{ - __asm__ __volatile__("\n\tstha %1, [%0] %2; nop; nop; nop;\n\t" : : - "r" (addr), "r" (entry), - "i" (ASI_SEGMAP) - : "memory"); -} - -static inline unsigned long sun4c_get_pte(unsigned long addr) -{ - register unsigned long entry; - - __asm__ __volatile__("\n\tlda [%1] %2, %0\n\t" : - "=r" (entry) : - "r" (addr), "i" (ASI_PTE)); - return entry; -} - -static inline void sun4c_put_pte(unsigned long addr, unsigned long entry) -{ - __asm__ __volatile__("\n\tsta %1, [%0] %2; nop; nop; nop;\n\t" : : - "r" (addr), - "r" ((entry & ~(_SUN4C_PAGE_PRESENT))), "i" (ASI_PTE) - : "memory"); -} - -static inline int sun4c_get_context(void) -{ - register int ctx; - - __asm__ __volatile__("\n\tlduba [%1] %2, %0\n\t" : - "=r" (ctx) : - "r" (AC_CONTEXT), "i" (ASI_CONTROL)); - - return ctx; -} - -static inline int sun4c_set_context(int ctx) -{ - __asm__ __volatile__("\n\tstba %0, [%1] %2; nop; nop; nop;\n\t" : : - "r" (ctx), "r" (AC_CONTEXT), "i" (ASI_CONTROL) - : "memory"); - - return ctx; -} - -#endif /* !(__ASSEMBLY__) */ - -#endif /* !(_SPARC_PGTSUN4_H) */ diff --git a/include/asm-sparc/pgtsun4c.h b/include/asm-sparc/pgtsun4c.h deleted file mode 100644 index aeb25e912179..000000000000 --- a/include/asm-sparc/pgtsun4c.h +++ /dev/null @@ -1,172 +0,0 @@ -/* - * pgtsun4c.h: Sun4c specific pgtable.h defines and code. - * - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - */ -#ifndef _SPARC_PGTSUN4C_H -#define _SPARC_PGTSUN4C_H - -#include <asm/contregs.h> - -/* PMD_SHIFT determines the size of the area a second-level page table can map */ -#define SUN4C_PMD_SHIFT 22 - -/* PGDIR_SHIFT determines what a third-level page table entry can map */ -#define SUN4C_PGDIR_SHIFT 22 -#define SUN4C_PGDIR_SIZE (1UL << SUN4C_PGDIR_SHIFT) -#define SUN4C_PGDIR_MASK (~(SUN4C_PGDIR_SIZE-1)) -#define SUN4C_PGDIR_ALIGN(addr) (((addr)+SUN4C_PGDIR_SIZE-1)&SUN4C_PGDIR_MASK) - -/* To represent how the sun4c mmu really lays things out. */ -#define SUN4C_REAL_PGDIR_SHIFT 18 -#define SUN4C_REAL_PGDIR_SIZE (1UL << SUN4C_REAL_PGDIR_SHIFT) -#define SUN4C_REAL_PGDIR_MASK (~(SUN4C_REAL_PGDIR_SIZE-1)) -#define SUN4C_REAL_PGDIR_ALIGN(addr) (((addr)+SUN4C_REAL_PGDIR_SIZE-1)&SUN4C_REAL_PGDIR_MASK) - -/* 16 bit PFN on sun4c */ -#define SUN4C_PFN_MASK 0xffff - -/* Don't increase these unless the structures in sun4c.c are fixed */ -#define SUN4C_MAX_SEGMAPS 256 -#define SUN4C_MAX_CONTEXTS 16 - -/* - * To be efficient, and not have to worry about allocating such - * a huge pgd, we make the kernel sun4c tables each hold 1024 - * entries and the pgd similarly just like the i386 tables. - */ -#define SUN4C_PTRS_PER_PTE 1024 -#define SUN4C_PTRS_PER_PMD 1 -#define SUN4C_PTRS_PER_PGD 1024 - -/* - * Sparc SUN4C pte fields. - */ -#define _SUN4C_PAGE_VALID 0x80000000 -#define _SUN4C_PAGE_SILENT_READ 0x80000000 /* synonym */ -#define _SUN4C_PAGE_DIRTY 0x40000000 -#define _SUN4C_PAGE_SILENT_WRITE 0x40000000 /* synonym */ -#define _SUN4C_PAGE_PRIV 0x20000000 /* privileged page */ -#define _SUN4C_PAGE_NOCACHE 0x10000000 /* non-cacheable page */ -#define _SUN4C_PAGE_PRESENT 0x08000000 /* implemented in software */ -#define _SUN4C_PAGE_IO 0x04000000 /* I/O page */ -#define _SUN4C_PAGE_FILE 0x02000000 /* implemented in software */ -#define _SUN4C_PAGE_READ 0x00800000 /* implemented in software */ -#define _SUN4C_PAGE_WRITE 0x00400000 /* implemented in software */ -#define _SUN4C_PAGE_ACCESSED 0x00200000 /* implemented in software */ -#define _SUN4C_PAGE_MODIFIED 0x00100000 /* implemented in software */ - -#define _SUN4C_READABLE (_SUN4C_PAGE_READ|_SUN4C_PAGE_SILENT_READ|\ - _SUN4C_PAGE_ACCESSED) -#define _SUN4C_WRITEABLE (_SUN4C_PAGE_WRITE|_SUN4C_PAGE_SILENT_WRITE|\ - _SUN4C_PAGE_MODIFIED) - -#define _SUN4C_PAGE_CHG_MASK (0xffff|_SUN4C_PAGE_ACCESSED|_SUN4C_PAGE_MODIFIED) - -#define SUN4C_PAGE_NONE __pgprot(_SUN4C_PAGE_PRESENT) -#define SUN4C_PAGE_SHARED __pgprot(_SUN4C_PAGE_PRESENT|_SUN4C_READABLE|\ - _SUN4C_PAGE_WRITE) -#define SUN4C_PAGE_COPY __pgprot(_SUN4C_PAGE_PRESENT|_SUN4C_READABLE) -#define SUN4C_PAGE_READONLY __pgprot(_SUN4C_PAGE_PRESENT|_SUN4C_READABLE) -#define SUN4C_PAGE_KERNEL __pgprot(_SUN4C_READABLE|_SUN4C_WRITEABLE|\ - _SUN4C_PAGE_DIRTY|_SUN4C_PAGE_PRIV) - -/* SUN4C swap entry encoding - * - * We use 5 bits for the type and 19 for the offset. This gives us - * 32 swapfiles of 4GB each. Encoding looks like: - * - * RRRRRRRRooooooooooooooooooottttt - * fedcba9876543210fedcba9876543210 - * - * The top 8 bits are reserved for protection and status bits, especially - * FILE and PRESENT. - */ -#define SUN4C_SWP_TYPE_MASK 0x1f -#define SUN4C_SWP_OFF_MASK 0x7ffff -#define SUN4C_SWP_OFF_SHIFT 5 - -#ifndef __ASSEMBLY__ - -static inline unsigned long sun4c_get_synchronous_error(void) -{ - unsigned long sync_err; - - __asm__ __volatile__("lda [%1] %2, %0\n\t" : - "=r" (sync_err) : - "r" (AC_SYNC_ERR), "i" (ASI_CONTROL)); - return sync_err; -} - -static inline unsigned long sun4c_get_synchronous_address(void) -{ - unsigned long sync_addr; - - __asm__ __volatile__("lda [%1] %2, %0\n\t" : - "=r" (sync_addr) : - "r" (AC_SYNC_VA), "i" (ASI_CONTROL)); - return sync_addr; -} - -/* SUN4C pte, segmap, and context manipulation */ -static inline unsigned long sun4c_get_segmap(unsigned long addr) -{ - register unsigned long entry; - - __asm__ __volatile__("\n\tlduba [%1] %2, %0\n\t" : - "=r" (entry) : - "r" (addr), "i" (ASI_SEGMAP)); - - return entry; -} - -static inline void sun4c_put_segmap(unsigned long addr, unsigned long entry) -{ - - __asm__ __volatile__("\n\tstba %1, [%0] %2; nop; nop; nop;\n\t" : : - "r" (addr), "r" (entry), - "i" (ASI_SEGMAP) - : "memory"); -} - -static inline unsigned long sun4c_get_pte(unsigned long addr) -{ - register unsigned long entry; - - __asm__ __volatile__("\n\tlda [%1] %2, %0\n\t" : - "=r" (entry) : - "r" (addr), "i" (ASI_PTE)); - return entry; -} - -static inline void sun4c_put_pte(unsigned long addr, unsigned long entry) -{ - __asm__ __volatile__("\n\tsta %1, [%0] %2; nop; nop; nop;\n\t" : : - "r" (addr), - "r" ((entry & ~(_SUN4C_PAGE_PRESENT))), "i" (ASI_PTE) - : "memory"); -} - -static inline int sun4c_get_context(void) -{ - register int ctx; - - __asm__ __volatile__("\n\tlduba [%1] %2, %0\n\t" : - "=r" (ctx) : - "r" (AC_CONTEXT), "i" (ASI_CONTROL)); - - return ctx; -} - -static inline int sun4c_set_context(int ctx) -{ - __asm__ __volatile__("\n\tstba %0, [%1] %2; nop; nop; nop;\n\t" : : - "r" (ctx), "r" (AC_CONTEXT), "i" (ASI_CONTROL) - : "memory"); - - return ctx; -} - -#endif /* !(__ASSEMBLY__) */ - -#endif /* !(_SPARC_PGTSUN4C_H) */ diff --git a/include/asm-sparc/poll.h b/include/asm-sparc/poll.h deleted file mode 100644 index 091d3ad2e830..000000000000 --- a/include/asm-sparc/poll.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef __SPARC_POLL_H -#define __SPARC_POLL_H - -#define POLLWRNORM POLLOUT -#define POLLWRBAND 256 -#define POLLMSG 512 -#define POLLREMOVE 1024 -#define POLLRDHUP 2048 - -#include <asm-generic/poll.h> - -#endif diff --git a/include/asm-sparc/posix_types.h b/include/asm-sparc/posix_types.h deleted file mode 100644 index dcc07eb5e181..000000000000 --- a/include/asm-sparc/posix_types.h +++ /dev/null @@ -1,118 +0,0 @@ -#ifndef __ARCH_SPARC_POSIX_TYPES_H -#define __ARCH_SPARC_POSIX_TYPES_H - -/* - * This file is generally used by user-level software, so you need to - * be a little careful about namespace pollution etc. Also, we cannot - * assume GCC is being used. - */ - -typedef unsigned int __kernel_size_t; -typedef int __kernel_ssize_t; -typedef long int __kernel_ptrdiff_t; -typedef long __kernel_time_t; -typedef long __kernel_suseconds_t; -typedef long __kernel_clock_t; -typedef int __kernel_pid_t; -typedef unsigned short __kernel_ipc_pid_t; -typedef unsigned short __kernel_uid_t; -typedef unsigned short __kernel_gid_t; -typedef unsigned long __kernel_ino_t; -typedef unsigned short __kernel_mode_t; -typedef unsigned short __kernel_umode_t; -typedef short __kernel_nlink_t; -typedef long __kernel_daddr_t; -typedef long __kernel_off_t; -typedef char * __kernel_caddr_t; -typedef unsigned short __kernel_uid16_t; -typedef unsigned short __kernel_gid16_t; -typedef unsigned int __kernel_uid32_t; -typedef unsigned int __kernel_gid32_t; -typedef unsigned short __kernel_old_uid_t; -typedef unsigned short __kernel_old_gid_t; -typedef unsigned short __kernel_old_dev_t; -typedef int __kernel_clockid_t; -typedef int __kernel_timer_t; - -#ifdef __GNUC__ -typedef long long __kernel_loff_t; -#endif - -typedef struct { - int val[2]; -} __kernel_fsid_t; - -#if defined(__KERNEL__) - -#undef __FD_SET -static inline void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp) -{ - unsigned long _tmp = fd / __NFDBITS; - unsigned long _rem = fd % __NFDBITS; - fdsetp->fds_bits[_tmp] |= (1UL<<_rem); -} - -#undef __FD_CLR -static inline void __FD_CLR(unsigned long fd, __kernel_fd_set *fdsetp) -{ - unsigned long _tmp = fd / __NFDBITS; - unsigned long _rem = fd % __NFDBITS; - fdsetp->fds_bits[_tmp] &= ~(1UL<<_rem); -} - -#undef __FD_ISSET -static inline int __FD_ISSET(unsigned long fd, __const__ __kernel_fd_set *p) -{ - unsigned long _tmp = fd / __NFDBITS; - unsigned long _rem = fd % __NFDBITS; - return (p->fds_bits[_tmp] & (1UL<<_rem)) != 0; -} - -/* - * This will unroll the loop for the normal constant cases (8 or 32 longs, - * for 256 and 1024-bit fd_sets respectively) - */ -#undef __FD_ZERO -static inline void __FD_ZERO(__kernel_fd_set *p) -{ - unsigned long *tmp = p->fds_bits; - int i; - - if (__builtin_constant_p(__FDSET_LONGS)) { - switch (__FDSET_LONGS) { - case 32: - tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0; - tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0; - tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0; - tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0; - tmp[16] = 0; tmp[17] = 0; tmp[18] = 0; tmp[19] = 0; - tmp[20] = 0; tmp[21] = 0; tmp[22] = 0; tmp[23] = 0; - tmp[24] = 0; tmp[25] = 0; tmp[26] = 0; tmp[27] = 0; - tmp[28] = 0; tmp[29] = 0; tmp[30] = 0; tmp[31] = 0; - return; - case 16: - tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0; - tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0; - tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0; - tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0; - return; - case 8: - tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0; - tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0; - return; - case 4: - tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0; - return; - } - } - i = __FDSET_LONGS; - while (i) { - i--; - *tmp = 0; - tmp++; - } -} - -#endif /* defined(__KERNEL__) */ - -#endif /* !(__ARCH_SPARC_POSIX_TYPES_H) */ diff --git a/include/asm-sparc/processor.h b/include/asm-sparc/processor.h deleted file mode 100644 index 8898efbbbe07..000000000000 --- a/include/asm-sparc/processor.h +++ /dev/null @@ -1,128 +0,0 @@ -/* include/asm-sparc/processor.h - * - * Copyright (C) 1994 David S. Miller (davem@caip.rutgers.edu) - */ - -#ifndef __ASM_SPARC_PROCESSOR_H -#define __ASM_SPARC_PROCESSOR_H - -/* - * Sparc32 implementation of macro that returns current - * instruction pointer ("program counter"). - */ -#define current_text_addr() ({ void *pc; __asm__("sethi %%hi(1f), %0; or %0, %%lo(1f), %0;\n1:" : "=r" (pc)); pc; }) - -#include <asm/psr.h> -#include <asm/ptrace.h> -#include <asm/head.h> -#include <asm/signal.h> -#include <asm/btfixup.h> -#include <asm/page.h> - -/* - * The sparc has no problems with write protection - */ -#define wp_works_ok 1 -#define wp_works_ok__is_a_macro /* for versions in ksyms.c */ - -/* Whee, this is STACK_TOP + PAGE_SIZE and the lowest kernel address too... - * That one page is used to protect kernel from intruders, so that - * we can make our access_ok test faster - */ -#define TASK_SIZE PAGE_OFFSET -#ifdef __KERNEL__ -#define STACK_TOP (PAGE_OFFSET - PAGE_SIZE) -#define STACK_TOP_MAX STACK_TOP -#endif /* __KERNEL__ */ - -struct task_struct; - -#ifdef __KERNEL__ -struct fpq { - unsigned long *insn_addr; - unsigned long insn; -}; -#endif - -typedef struct { - int seg; -} mm_segment_t; - -/* The Sparc processor specific thread struct. */ -struct thread_struct { - struct pt_regs *kregs; - unsigned int _pad1; - - /* Special child fork kpsr/kwim values. */ - unsigned long fork_kpsr __attribute__ ((aligned (8))); - unsigned long fork_kwim; - - /* Floating point regs */ - unsigned long float_regs[32] __attribute__ ((aligned (8))); - unsigned long fsr; - unsigned long fpqdepth; - struct fpq fpqueue[16]; - unsigned long flags; - mm_segment_t current_ds; -}; - -#define SPARC_FLAG_KTHREAD 0x1 /* task is a kernel thread */ -#define SPARC_FLAG_UNALIGNED 0x2 /* is allowed to do unaligned accesses */ - -#define INIT_THREAD { \ - .flags = SPARC_FLAG_KTHREAD, \ - .current_ds = KERNEL_DS, \ -} - -/* Return saved PC of a blocked thread. */ -extern unsigned long thread_saved_pc(struct task_struct *t); - -/* Do necessary setup to start up a newly executed thread. */ -static inline void start_thread(struct pt_regs * regs, unsigned long pc, - unsigned long sp) -{ - register unsigned long zero asm("g1"); - - regs->psr = (regs->psr & (PSR_CWP)) | PSR_S; - regs->pc = ((pc & (~3)) - 4); - regs->npc = regs->pc + 4; - regs->y = 0; - zero = 0; - __asm__ __volatile__("std\t%%g0, [%0 + %3 + 0x00]\n\t" - "std\t%%g0, [%0 + %3 + 0x08]\n\t" - "std\t%%g0, [%0 + %3 + 0x10]\n\t" - "std\t%%g0, [%0 + %3 + 0x18]\n\t" - "std\t%%g0, [%0 + %3 + 0x20]\n\t" - "std\t%%g0, [%0 + %3 + 0x28]\n\t" - "std\t%%g0, [%0 + %3 + 0x30]\n\t" - "st\t%1, [%0 + %3 + 0x38]\n\t" - "st\t%%g0, [%0 + %3 + 0x3c]" - : /* no outputs */ - : "r" (regs), - "r" (sp - sizeof(struct reg_window)), - "r" (zero), - "i" ((const unsigned long)(&((struct pt_regs *)0)->u_regs[0])) - : "memory"); -} - -/* Free all resources held by a thread. */ -#define release_thread(tsk) do { } while(0) -extern pid_t kernel_thread(int (*fn)(void *), void * arg, unsigned long flags); - -/* Prepare to copy thread state - unlazy all lazy status */ -#define prepare_to_copy(tsk) do { } while (0) - -extern unsigned long get_wchan(struct task_struct *); - -#define KSTK_EIP(tsk) ((tsk)->thread.kregs->pc) -#define KSTK_ESP(tsk) ((tsk)->thread.kregs->u_regs[UREG_FP]) - -#ifdef __KERNEL__ - -extern struct task_struct *last_task_used_math; - -#define cpu_relax() barrier() - -#endif - -#endif /* __ASM_SPARC_PROCESSOR_H */ diff --git a/include/asm-sparc/prom.h b/include/asm-sparc/prom.h deleted file mode 100644 index fd55522481cd..000000000000 --- a/include/asm-sparc/prom.h +++ /dev/null @@ -1,108 +0,0 @@ -#ifndef _SPARC_PROM_H -#define _SPARC_PROM_H -#ifdef __KERNEL__ - -/* - * Definitions for talking to the Open Firmware PROM on - * Power Macintosh computers. - * - * Copyright (C) 1996-2005 Paul Mackerras. - * - * Updates for PPC64 by Peter Bergner & David Engebretsen, IBM Corp. - * Updates for SPARC by David S. Miller - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include <linux/types.h> -#include <linux/proc_fs.h> -#include <asm/atomic.h> - -#define OF_ROOT_NODE_ADDR_CELLS_DEFAULT 2 -#define OF_ROOT_NODE_SIZE_CELLS_DEFAULT 1 - -#define of_compat_cmp(s1, s2, l) strncmp((s1), (s2), (l)) -#define of_prop_cmp(s1, s2) strcasecmp((s1), (s2)) -#define of_node_cmp(s1, s2) strcmp((s1), (s2)) - -typedef u32 phandle; -typedef u32 ihandle; - -struct property { - char *name; - int length; - void *value; - struct property *next; - unsigned long _flags; - unsigned int unique_id; -}; - -struct of_irq_controller; -struct device_node { - const char *name; - const char *type; - phandle node; - char *path_component_name; - char *full_name; - - struct property *properties; - struct property *deadprops; /* removed properties */ - struct device_node *parent; - struct device_node *child; - struct device_node *sibling; - struct device_node *next; /* next device of same type */ - struct device_node *allnext; /* next in list of all nodes */ - struct proc_dir_entry *pde; /* this node's proc directory */ - struct kref kref; - unsigned long _flags; - void *data; - unsigned int unique_id; - - struct of_irq_controller *irq_trans; -}; - -struct of_irq_controller { - unsigned int (*irq_build)(struct device_node *, unsigned int, void *); - void *data; -}; - -#define OF_IS_DYNAMIC(x) test_bit(OF_DYNAMIC, &x->_flags) -#define OF_MARK_DYNAMIC(x) set_bit(OF_DYNAMIC, &x->_flags) - -extern struct device_node *of_find_node_by_cpuid(int cpuid); -extern int of_set_property(struct device_node *node, const char *name, void *val, int len); -extern int of_getintprop_default(struct device_node *np, - const char *name, - int def); -extern int of_find_in_proplist(const char *list, const char *match, int len); -#ifdef CONFIG_NUMA -extern int of_node_to_nid(struct device_node *dp); -#else -#define of_node_to_nid(dp) (-1) -#endif - -extern void prom_build_devicetree(void); - -/* Dummy ref counting routines - to be implemented later */ -static inline struct device_node *of_node_get(struct device_node *node) -{ - return node; -} -static inline void of_node_put(struct device_node *node) -{ -} - -/* - * NB: This is here while we transition from using asm/prom.h - * to linux/of.h - */ -#include <linux/of.h> - -extern struct device_node *of_console_device; -extern char *of_console_path; -extern char *of_console_options; - -#endif /* __KERNEL__ */ -#endif /* _SPARC_PROM_H */ diff --git a/include/asm-sparc/psr.h b/include/asm-sparc/psr.h deleted file mode 100644 index b8c0e5f0a66b..000000000000 --- a/include/asm-sparc/psr.h +++ /dev/null @@ -1,93 +0,0 @@ -/* - * psr.h: This file holds the macros for masking off various parts of - * the processor status register on the Sparc. This is valid - * for Version 8. On the V9 this is renamed to the PSTATE - * register and its members are accessed as fields like - * PSTATE.PRIV for the current CPU privilege level. - * - * Copyright (C) 1994 David S. Miller (davem@caip.rutgers.edu) - */ - -#ifndef __LINUX_SPARC_PSR_H -#define __LINUX_SPARC_PSR_H - -/* The Sparc PSR fields are laid out as the following: - * - * ------------------------------------------------------------------------ - * | impl | vers | icc | resv | EC | EF | PIL | S | PS | ET | CWP | - * | 31-28 | 27-24 | 23-20 | 19-14 | 13 | 12 | 11-8 | 7 | 6 | 5 | 4-0 | - * ------------------------------------------------------------------------ - */ -#define PSR_CWP 0x0000001f /* current window pointer */ -#define PSR_ET 0x00000020 /* enable traps field */ -#define PSR_PS 0x00000040 /* previous privilege level */ -#define PSR_S 0x00000080 /* current privilege level */ -#define PSR_PIL 0x00000f00 /* processor interrupt level */ -#define PSR_EF 0x00001000 /* enable floating point */ -#define PSR_EC 0x00002000 /* enable co-processor */ -#define PSR_SYSCALL 0x00004000 /* inside of a syscall */ -#define PSR_LE 0x00008000 /* SuperSparcII little-endian */ -#define PSR_ICC 0x00f00000 /* integer condition codes */ -#define PSR_C 0x00100000 /* carry bit */ -#define PSR_V 0x00200000 /* overflow bit */ -#define PSR_Z 0x00400000 /* zero bit */ -#define PSR_N 0x00800000 /* negative bit */ -#define PSR_VERS 0x0f000000 /* cpu-version field */ -#define PSR_IMPL 0xf0000000 /* cpu-implementation field */ - -#ifdef __KERNEL__ - -#ifndef __ASSEMBLY__ -/* Get the %psr register. */ -static inline unsigned int get_psr(void) -{ - unsigned int psr; - __asm__ __volatile__( - "rd %%psr, %0\n\t" - "nop\n\t" - "nop\n\t" - "nop\n\t" - : "=r" (psr) - : /* no inputs */ - : "memory"); - - return psr; -} - -static inline void put_psr(unsigned int new_psr) -{ - __asm__ __volatile__( - "wr %0, 0x0, %%psr\n\t" - "nop\n\t" - "nop\n\t" - "nop\n\t" - : /* no outputs */ - : "r" (new_psr) - : "memory", "cc"); -} - -/* Get the %fsr register. Be careful, make sure the floating point - * enable bit is set in the %psr when you execute this or you will - * incur a trap. - */ - -extern unsigned int fsr_storage; - -static inline unsigned int get_fsr(void) -{ - unsigned int fsr = 0; - - __asm__ __volatile__( - "st %%fsr, %1\n\t" - "ld %1, %0\n\t" - : "=r" (fsr) - : "m" (fsr_storage)); - - return fsr; -} - -#endif /* !(__ASSEMBLY__) */ - -#endif /* (__KERNEL__) */ - -#endif /* !(__LINUX_SPARC_PSR_H) */ diff --git a/include/asm-sparc/ptrace.h b/include/asm-sparc/ptrace.h deleted file mode 100644 index 11f3bc2bb3f5..000000000000 --- a/include/asm-sparc/ptrace.h +++ /dev/null @@ -1,175 +0,0 @@ -#ifndef _SPARC_PTRACE_H -#define _SPARC_PTRACE_H - -#include <asm/psr.h> - -/* This struct defines the way the registers are stored on the - * stack during a system call and basically all traps. - */ - -#ifndef __ASSEMBLY__ - -#include <linux/types.h> - -struct pt_regs { - unsigned long psr; - unsigned long pc; - unsigned long npc; - unsigned long y; - unsigned long u_regs[16]; /* globals and ins */ -}; - -#define UREG_G0 0 -#define UREG_G1 1 -#define UREG_G2 2 -#define UREG_G3 3 -#define UREG_G4 4 -#define UREG_G5 5 -#define UREG_G6 6 -#define UREG_G7 7 -#define UREG_I0 8 -#define UREG_I1 9 -#define UREG_I2 10 -#define UREG_I3 11 -#define UREG_I4 12 -#define UREG_I5 13 -#define UREG_I6 14 -#define UREG_I7 15 -#define UREG_WIM UREG_G0 -#define UREG_FADDR UREG_G0 -#define UREG_FP UREG_I6 -#define UREG_RETPC UREG_I7 - -static inline bool pt_regs_is_syscall(struct pt_regs *regs) -{ - return (regs->psr & PSR_SYSCALL); -} - -static inline bool pt_regs_clear_syscall(struct pt_regs *regs) -{ - return (regs->psr &= ~PSR_SYSCALL); -} - -/* A register window */ -struct reg_window { - unsigned long locals[8]; - unsigned long ins[8]; -}; - -/* A Sparc stack frame */ -struct sparc_stackf { - unsigned long locals[8]; - unsigned long ins[6]; - struct sparc_stackf *fp; - unsigned long callers_pc; - char *structptr; - unsigned long xargs[6]; - unsigned long xxargs[1]; -}; - -#define TRACEREG_SZ sizeof(struct pt_regs) -#define STACKFRAME_SZ sizeof(struct sparc_stackf) - -#ifdef __KERNEL__ - -#define user_mode(regs) (!((regs)->psr & PSR_PS)) -#define instruction_pointer(regs) ((regs)->pc) -unsigned long profile_pc(struct pt_regs *); -extern void show_regs(struct pt_regs *); -#endif - -#else /* __ASSEMBLY__ */ -/* For assembly code. */ -#define TRACEREG_SZ 0x50 -#define STACKFRAME_SZ 0x60 -#endif - -/* - * The asm-offsets.h is a generated file, so we cannot include it. - * It may be OK for glibc headers, but it's utterly pointless for C code. - * The assembly code using those offsets has to include it explicitly. - */ -/* #include <asm/asm-offsets.h> */ - -/* These are for pt_regs. */ -#define PT_PSR 0x0 -#define PT_PC 0x4 -#define PT_NPC 0x8 -#define PT_Y 0xc -#define PT_G0 0x10 -#define PT_WIM PT_G0 -#define PT_G1 0x14 -#define PT_G2 0x18 -#define PT_G3 0x1c -#define PT_G4 0x20 -#define PT_G5 0x24 -#define PT_G6 0x28 -#define PT_G7 0x2c -#define PT_I0 0x30 -#define PT_I1 0x34 -#define PT_I2 0x38 -#define PT_I3 0x3c -#define PT_I4 0x40 -#define PT_I5 0x44 -#define PT_I6 0x48 -#define PT_FP PT_I6 -#define PT_I7 0x4c - -/* Reg_window offsets */ -#define RW_L0 0x00 -#define RW_L1 0x04 -#define RW_L2 0x08 -#define RW_L3 0x0c -#define RW_L4 0x10 -#define RW_L5 0x14 -#define RW_L6 0x18 -#define RW_L7 0x1c -#define RW_I0 0x20 -#define RW_I1 0x24 -#define RW_I2 0x28 -#define RW_I3 0x2c -#define RW_I4 0x30 -#define RW_I5 0x34 -#define RW_I6 0x38 -#define RW_I7 0x3c - -/* Stack_frame offsets */ -#define SF_L0 0x00 -#define SF_L1 0x04 -#define SF_L2 0x08 -#define SF_L3 0x0c -#define SF_L4 0x10 -#define SF_L5 0x14 -#define SF_L6 0x18 -#define SF_L7 0x1c -#define SF_I0 0x20 -#define SF_I1 0x24 -#define SF_I2 0x28 -#define SF_I3 0x2c -#define SF_I4 0x30 -#define SF_I5 0x34 -#define SF_FP 0x38 -#define SF_PC 0x3c -#define SF_RETP 0x40 -#define SF_XARG0 0x44 -#define SF_XARG1 0x48 -#define SF_XARG2 0x4c -#define SF_XARG3 0x50 -#define SF_XARG4 0x54 -#define SF_XARG5 0x58 -#define SF_XXARG 0x5c - -/* Stuff for the ptrace system call */ -#define PTRACE_SPARC_DETACH 11 -#define PTRACE_GETREGS 12 -#define PTRACE_SETREGS 13 -#define PTRACE_GETFPREGS 14 -#define PTRACE_SETFPREGS 15 -#define PTRACE_READDATA 16 -#define PTRACE_WRITEDATA 17 -#define PTRACE_READTEXT 18 -#define PTRACE_WRITETEXT 19 -#define PTRACE_GETFPAREGS 20 -#define PTRACE_SETFPAREGS 21 - -#endif /* !(_SPARC_PTRACE_H) */ diff --git a/include/asm-sparc/reg.h b/include/asm-sparc/reg.h deleted file mode 100644 index ea0a7e590bb3..000000000000 --- a/include/asm-sparc/reg.h +++ /dev/null @@ -1,79 +0,0 @@ -/* - * linux/include/asm-sparc/reg.h - * Layout of the registers as expected by gdb on the Sparc - * we should replace the user.h definitions with those in - * this file, we don't even use the other - * -miguel - * - * The names of the structures, constants and aliases in this file - * have the same names as the sunos ones, some programs rely on these - * names (gdb for example). - * - */ - -#ifndef __SPARC_REG_H -#define __SPARC_REG_H - -struct regs { - int r_psr; -#define r_ps r_psr - int r_pc; - int r_npc; - int r_y; - int r_g1; - int r_g2; - int r_g3; - int r_g4; - int r_g5; - int r_g6; - int r_g7; - int r_o0; - int r_o1; - int r_o2; - int r_o3; - int r_o4; - int r_o5; - int r_o6; - int r_o7; -}; - -struct fpq { - unsigned long *addr; - unsigned long instr; -}; - -struct fq { - union { - double whole; - struct fpq fpq; - } FQu; -}; - -#define FPU_REGS_TYPE unsigned int -#define FPU_FSR_TYPE unsigned - -struct fp_status { - union { - FPU_REGS_TYPE Fpu_regs[32]; - double Fpu_dregs[16]; - } fpu_fr; - FPU_FSR_TYPE Fpu_fsr; - unsigned Fpu_flags; - unsigned Fpu_extra; - unsigned Fpu_qcnt; - struct fq Fpu_q[16]; -}; - -#define fpu_regs f_fpstatus.fpu_fr.Fpu_regs -#define fpu_dregs f_fpstatus.fpu_fr.Fpu_dregs -#define fpu_fsr f_fpstatus.Fpu_fsr -#define fpu_flags f_fpstatus.Fpu_flags -#define fpu_extra f_fpstatus.Fpu_extra -#define fpu_q f_fpstatus.Fpu_q -#define fpu_qcnt f_fpstatus.Fpu_qcnt - -struct fpu { - struct fp_status f_fpstatus; -}; - -#endif /* __SPARC_REG_H */ diff --git a/include/asm-sparc/resource.h b/include/asm-sparc/resource.h deleted file mode 100644 index 985948a41299..000000000000 --- a/include/asm-sparc/resource.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * resource.h: Resource definitions. - * - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - */ - -#ifndef _SPARC_RESOURCE_H -#define _SPARC_RESOURCE_H - -/* - * These two resource limit IDs have a Sparc/Linux-specific ordering, - * the rest comes from the generic header: - */ -#define RLIMIT_NOFILE 6 /* max number of open files */ -#define RLIMIT_NPROC 7 /* max number of processes */ - -/* - * SuS says limits have to be unsigned. - * We make this unsigned, but keep the - * old value for compatibility: - */ -#define RLIM_INFINITY 0x7fffffff - -#include <asm-generic/resource.h> - -#endif /* !(_SPARC_RESOURCE_H) */ diff --git a/include/asm-sparc/ross.h b/include/asm-sparc/ross.h deleted file mode 100644 index ecb6e81786a6..000000000000 --- a/include/asm-sparc/ross.h +++ /dev/null @@ -1,191 +0,0 @@ -/* - * ross.h: Ross module specific definitions and defines. - * - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - */ - -#ifndef _SPARC_ROSS_H -#define _SPARC_ROSS_H - -#include <asm/asi.h> -#include <asm/page.h> - -/* Ross made Hypersparcs have a %psr 'impl' field of '0001'. The 'vers' - * field has '1111'. - */ - -/* The MMU control register fields on the HyperSparc. - * - * ----------------------------------------------------------------- - * |implvers| RSV |CWR|SE|WBE| MID |BM| C|CS|MR|CM|RSV|CE|RSV|NF|ME| - * ----------------------------------------------------------------- - * 31 24 23-22 21 20 19 18-15 14 13 12 11 10 9 8 7-2 1 0 - * - * Phew, lots of fields there ;-) - * - * CWR: Cache Wrapping Enabled, if one cache wrapping is on. - * SE: Snoop Enable, turns on bus snooping for cache activity if one. - * WBE: Write Buffer Enable, one turns it on. - * MID: The ModuleID of the chip for MBus transactions. - * BM: Boot-Mode. One indicates the MMU is in boot mode. - * C: Indicates whether accesses are cachable while the MMU is - * disabled. - * CS: Cache Size -- 0 = 128k, 1 = 256k - * MR: Memory Reflection, one indicates that the memory bus connected - * to the MBus supports memory reflection. - * CM: Cache Mode -- 0 = write-through, 1 = copy-back - * CE: Cache Enable -- 0 = no caching, 1 = cache is on - * NF: No Fault -- 0 = faults trap the CPU from supervisor mode - * 1 = faults from supervisor mode do not generate traps - * ME: MMU Enable -- 0 = MMU is off, 1 = MMU is on - */ - -#define HYPERSPARC_CWENABLE 0x00200000 -#define HYPERSPARC_SBENABLE 0x00100000 -#define HYPERSPARC_WBENABLE 0x00080000 -#define HYPERSPARC_MIDMASK 0x00078000 -#define HYPERSPARC_BMODE 0x00004000 -#define HYPERSPARC_ACENABLE 0x00002000 -#define HYPERSPARC_CSIZE 0x00001000 -#define HYPERSPARC_MRFLCT 0x00000800 -#define HYPERSPARC_CMODE 0x00000400 -#define HYPERSPARC_CENABLE 0x00000100 -#define HYPERSPARC_NFAULT 0x00000002 -#define HYPERSPARC_MENABLE 0x00000001 - - -/* The ICCR instruction cache register on the HyperSparc. - * - * ----------------------------------------------- - * | | FTD | ICE | - * ----------------------------------------------- - * 31 1 0 - * - * This register is accessed using the V8 'wrasr' and 'rdasr' - * opcodes, since not all assemblers understand them and those - * that do use different semantics I will just hard code the - * instruction with a '.word' statement. - * - * FTD: If set to one flush instructions executed during an - * instruction cache hit occurs, the corresponding line - * for said cache-hit is invalidated. If FTD is zero, - * an unimplemented 'flush' trap will occur when any - * flush is executed by the processor. - * - * ICE: If set to one, the instruction cache is enabled. If - * zero, the cache will not be used for instruction fetches. - * - * All other bits are read as zeros, and writes to them have no - * effect. - * - * Wheee, not many assemblers understand the %iccr register nor - * the generic asr r/w instructions. - * - * 1000 0011 0100 0111 1100 0000 0000 0000 ! rd %iccr, %g1 - * - * 0x 8 3 4 7 c 0 0 0 ! 0x8347c000 - * - * 1011 1111 1000 0000 0110 0000 0000 0000 ! wr %g1, 0x0, %iccr - * - * 0x b f 8 0 6 0 0 0 ! 0xbf806000 - * - */ - -#define HYPERSPARC_ICCR_FTD 0x00000002 -#define HYPERSPARC_ICCR_ICE 0x00000001 - -#ifndef __ASSEMBLY__ - -static inline unsigned int get_ross_icr(void) -{ - unsigned int icreg; - - __asm__ __volatile__(".word 0x8347c000\n\t" /* rd %iccr, %g1 */ - "mov %%g1, %0\n\t" - : "=r" (icreg) - : /* no inputs */ - : "g1", "memory"); - - return icreg; -} - -static inline void put_ross_icr(unsigned int icreg) -{ - __asm__ __volatile__("or %%g0, %0, %%g1\n\t" - ".word 0xbf806000\n\t" /* wr %g1, 0x0, %iccr */ - "nop\n\t" - "nop\n\t" - "nop\n\t" - : /* no outputs */ - : "r" (icreg) - : "g1", "memory"); - - return; -} - -/* HyperSparc specific cache flushing. */ - -/* This is for the on-chip instruction cache. */ -static inline void hyper_flush_whole_icache(void) -{ - __asm__ __volatile__("sta %%g0, [%%g0] %0\n\t" - : /* no outputs */ - : "i" (ASI_M_FLUSH_IWHOLE) - : "memory"); - return; -} - -extern int vac_cache_size; -extern int vac_line_size; - -static inline void hyper_clear_all_tags(void) -{ - unsigned long addr; - - for(addr = 0; addr < vac_cache_size; addr += vac_line_size) - __asm__ __volatile__("sta %%g0, [%0] %1\n\t" - : /* no outputs */ - : "r" (addr), "i" (ASI_M_DATAC_TAG) - : "memory"); -} - -static inline void hyper_flush_unconditional_combined(void) -{ - unsigned long addr; - - for (addr = 0; addr < vac_cache_size; addr += vac_line_size) - __asm__ __volatile__("sta %%g0, [%0] %1\n\t" - : /* no outputs */ - : "r" (addr), "i" (ASI_M_FLUSH_CTX) - : "memory"); -} - -static inline void hyper_flush_cache_user(void) -{ - unsigned long addr; - - for (addr = 0; addr < vac_cache_size; addr += vac_line_size) - __asm__ __volatile__("sta %%g0, [%0] %1\n\t" - : /* no outputs */ - : "r" (addr), "i" (ASI_M_FLUSH_USER) - : "memory"); -} - -static inline void hyper_flush_cache_page(unsigned long page) -{ - unsigned long end; - - page &= PAGE_MASK; - end = page + PAGE_SIZE; - while (page < end) { - __asm__ __volatile__("sta %%g0, [%0] %1\n\t" - : /* no outputs */ - : "r" (page), "i" (ASI_M_FLUSH_PAGE) - : "memory"); - page += vac_line_size; - } -} - -#endif /* !(__ASSEMBLY__) */ - -#endif /* !(_SPARC_ROSS_H) */ diff --git a/include/asm-sparc/rtc.h b/include/asm-sparc/rtc.h deleted file mode 100644 index f9ecb1fe2ecd..000000000000 --- a/include/asm-sparc/rtc.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * rtc.h: Definitions for access to the Mostek real time clock - * - * Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu) - */ - -#ifndef _RTC_H -#define _RTC_H - -#include <linux/ioctl.h> - -struct rtc_time -{ - int sec; /* Seconds (0-59) */ - int min; /* Minutes (0-59) */ - int hour; /* Hour (0-23) */ - int dow; /* Day of the week (1-7) */ - int dom; /* Day of the month (1-31) */ - int month; /* Month of year (1-12) */ - int year; /* Year (0-99) */ -}; - -#define RTCGET _IOR('p', 20, struct rtc_time) -#define RTCSET _IOW('p', 21, struct rtc_time) - -#endif diff --git a/include/asm-sparc/sbi.h b/include/asm-sparc/sbi.h deleted file mode 100644 index 5eb7f1965d33..000000000000 --- a/include/asm-sparc/sbi.h +++ /dev/null @@ -1,115 +0,0 @@ -/* - * sbi.h: SBI (Sbus Interface on sun4d) definitions - * - * Copyright (C) 1997 Jakub Jelinek <jj@sunsite.mff.cuni.cz> - */ - -#ifndef _SPARC_SBI_H -#define _SPARC_SBI_H - -#include <asm/obio.h> - -/* SBI */ -struct sbi_regs { -/* 0x0000 */ u32 cid; /* Component ID */ -/* 0x0004 */ u32 ctl; /* Control */ -/* 0x0008 */ u32 status; /* Status */ - u32 _unused1; - -/* 0x0010 */ u32 cfg0; /* Slot0 config reg */ -/* 0x0014 */ u32 cfg1; /* Slot1 config reg */ -/* 0x0018 */ u32 cfg2; /* Slot2 config reg */ -/* 0x001c */ u32 cfg3; /* Slot3 config reg */ - -/* 0x0020 */ u32 stb0; /* Streaming buf control for slot 0 */ -/* 0x0024 */ u32 stb1; /* Streaming buf control for slot 1 */ -/* 0x0028 */ u32 stb2; /* Streaming buf control for slot 2 */ -/* 0x002c */ u32 stb3; /* Streaming buf control for slot 3 */ - -/* 0x0030 */ u32 intr_state; /* Interrupt state */ -/* 0x0034 */ u32 intr_tid; /* Interrupt target ID */ -/* 0x0038 */ u32 intr_diag; /* Interrupt diagnostics */ -}; - -#define SBI_CID 0x02800000 -#define SBI_CTL 0x02800004 -#define SBI_STATUS 0x02800008 -#define SBI_CFG0 0x02800010 -#define SBI_CFG1 0x02800014 -#define SBI_CFG2 0x02800018 -#define SBI_CFG3 0x0280001c -#define SBI_STB0 0x02800020 -#define SBI_STB1 0x02800024 -#define SBI_STB2 0x02800028 -#define SBI_STB3 0x0280002c -#define SBI_INTR_STATE 0x02800030 -#define SBI_INTR_TID 0x02800034 -#define SBI_INTR_DIAG 0x02800038 - -/* Burst bits for 8, 16, 32, 64 are in cfgX registers at bits 2, 3, 4, 5 respectively */ -#define SBI_CFG_BURST_MASK 0x0000001e - -/* How to make devid from sbi no */ -#define SBI2DEVID(sbino) ((sbino<<4)|2) - -/* intr_state has 4 bits for slots 0 .. 3 and these bits are repeated for each sbus irq level - * - * +-------+-------+-------+-------+-------+-------+-------+-------+ - * SBUS IRQ LEVEL | 7 | 6 | 5 | 4 | 3 | 2 | 1 | | - * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Reser | - * SLOT # |3|2|1|0|3|2|1|0|3|2|1|0|3|2|1|0|3|2|1|0|3|2|1|0|3|2|1|0| ved | - * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-------+ - * Bits 31 27 23 19 15 11 7 3 0 - */ - - -#ifndef __ASSEMBLY__ - -static inline int acquire_sbi(int devid, int mask) -{ - __asm__ __volatile__ ("swapa [%2] %3, %0" : - "=r" (mask) : - "0" (mask), - "r" (ECSR_DEV_BASE(devid) | SBI_INTR_STATE), - "i" (ASI_M_CTL)); - return mask; -} - -static inline void release_sbi(int devid, int mask) -{ - __asm__ __volatile__ ("sta %0, [%1] %2" : : - "r" (mask), - "r" (ECSR_DEV_BASE(devid) | SBI_INTR_STATE), - "i" (ASI_M_CTL)); -} - -static inline void set_sbi_tid(int devid, int targetid) -{ - __asm__ __volatile__ ("sta %0, [%1] %2" : : - "r" (targetid), - "r" (ECSR_DEV_BASE(devid) | SBI_INTR_TID), - "i" (ASI_M_CTL)); -} - -static inline int get_sbi_ctl(int devid, int cfgno) -{ - int cfg; - - __asm__ __volatile__ ("lda [%1] %2, %0" : - "=r" (cfg) : - "r" ((ECSR_DEV_BASE(devid) | SBI_CFG0) + (cfgno<<2)), - "i" (ASI_M_CTL)); - return cfg; -} - -static inline void set_sbi_ctl(int devid, int cfgno, int cfg) -{ - __asm__ __volatile__ ("sta %0, [%1] %2" : : - "r" (cfg), - "r" ((ECSR_DEV_BASE(devid) | SBI_CFG0) + (cfgno<<2)), - "i" (ASI_M_CTL)); -} - -#endif /* !__ASSEMBLY__ */ - -#endif /* !(_SPARC_SBI_H) */ diff --git a/include/asm-sparc/sbus.h b/include/asm-sparc/sbus.h deleted file mode 100644 index f1d2fe1c9a30..000000000000 --- a/include/asm-sparc/sbus.h +++ /dev/null @@ -1,153 +0,0 @@ -/* - * sbus.h: Defines for the Sun SBus. - * - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - */ - -#ifndef _SPARC_SBUS_H -#define _SPARC_SBUS_H - -#include <linux/dma-mapping.h> -#include <linux/ioport.h> - -#include <asm/oplib.h> -#include <asm/prom.h> -#include <asm/of_device.h> -#include <asm/scatterlist.h> - -/* We scan which devices are on the SBus using the PROM node device - * tree. SBus devices are described in two different ways. You can - * either get an absolute address at which to access the device, or - * you can get a SBus 'slot' number and an offset within that slot. - */ - -/* The base address at which to calculate device OBIO addresses. */ -#define SUN_SBUS_BVADDR 0xf8000000 -#define SBUS_OFF_MASK 0x01ffffff - -/* These routines are used to calculate device address from slot - * numbers + offsets, and vice versa. - */ - -static inline unsigned long sbus_devaddr(int slotnum, unsigned long offset) -{ - return (unsigned long) (SUN_SBUS_BVADDR+((slotnum)<<25)+(offset)); -} - -static inline int sbus_dev_slot(unsigned long dev_addr) -{ - return (int) (((dev_addr)-SUN_SBUS_BVADDR)>>25); -} - -struct sbus_bus; - -/* Linux SBUS device tables */ -struct sbus_dev { - struct of_device ofdev; - struct sbus_bus *bus; - struct sbus_dev *next; - struct sbus_dev *child; - struct sbus_dev *parent; - int prom_node; - char prom_name[64]; - int slot; - - struct resource resource[PROMREG_MAX]; - - struct linux_prom_registers reg_addrs[PROMREG_MAX]; - int num_registers; - - struct linux_prom_ranges device_ranges[PROMREG_MAX]; - int num_device_ranges; - - unsigned int irqs[4]; - int num_irqs; -}; -#define to_sbus_device(d) container_of(d, struct sbus_dev, ofdev.dev) - -/* This struct describes the SBus(s) found on this machine. */ -struct sbus_bus { - struct of_device ofdev; - struct sbus_dev *devices; /* Link to devices on this SBus */ - struct sbus_bus *next; /* next SBus, if more than one SBus */ - int prom_node; /* PROM device tree node for this SBus */ - char prom_name[64]; /* Usually "sbus" or "sbi" */ - int clock_freq; - - struct linux_prom_ranges sbus_ranges[PROMREG_MAX]; - int num_sbus_ranges; - - int devid; - int board; -}; -#define to_sbus(d) container_of(d, struct sbus_bus, ofdev.dev) - -extern struct sbus_bus *sbus_root; - -static inline int -sbus_is_slave(struct sbus_dev *dev) -{ - /* XXX Have to write this for sun4c's */ - return 0; -} - -/* Device probing routines could find these handy */ -#define for_each_sbus(bus) \ - for((bus) = sbus_root; (bus); (bus)=(bus)->next) - -#define for_each_sbusdev(device, bus) \ - for((device) = (bus)->devices; (device); (device)=(device)->next) - -#define for_all_sbusdev(device, bus) \ - for ((bus) = sbus_root; (bus); (bus) = (bus)->next) \ - for ((device) = (bus)->devices; (device); (device) = (device)->next) - -/* Driver DVMA interfaces. */ -#define sbus_can_dma_64bit(sdev) (0) /* actually, sparc_cpu_model==sun4d */ -#define sbus_can_burst64(sdev) (0) /* actually, sparc_cpu_model==sun4d */ -extern void sbus_set_sbus64(struct sbus_dev *, int); -extern void sbus_fill_device_irq(struct sbus_dev *); - -/* These yield IOMMU mappings in consistent mode. */ -extern void *sbus_alloc_consistent(struct sbus_dev *, long, u32 *dma_addrp); -extern void sbus_free_consistent(struct sbus_dev *, long, void *, u32); -void prom_adjust_ranges(struct linux_prom_ranges *, int, - struct linux_prom_ranges *, int); - -#define SBUS_DMA_BIDIRECTIONAL DMA_BIDIRECTIONAL -#define SBUS_DMA_TODEVICE DMA_TO_DEVICE -#define SBUS_DMA_FROMDEVICE DMA_FROM_DEVICE -#define SBUS_DMA_NONE DMA_NONE - -/* All the rest use streaming mode mappings. */ -extern dma_addr_t sbus_map_single(struct sbus_dev *, void *, size_t, int); -extern void sbus_unmap_single(struct sbus_dev *, dma_addr_t, size_t, int); -extern int sbus_map_sg(struct sbus_dev *, struct scatterlist *, int, int); -extern void sbus_unmap_sg(struct sbus_dev *, struct scatterlist *, int, int); - -/* Finally, allow explicit synchronization of streamable mappings. */ -extern void sbus_dma_sync_single_for_cpu(struct sbus_dev *, dma_addr_t, size_t, int); -#define sbus_dma_sync_single sbus_dma_sync_single_for_cpu -extern void sbus_dma_sync_single_for_device(struct sbus_dev *, dma_addr_t, size_t, int); -extern void sbus_dma_sync_sg_for_cpu(struct sbus_dev *, struct scatterlist *, int, int); -#define sbus_dma_sync_sg sbus_dma_sync_sg_for_cpu -extern void sbus_dma_sync_sg_for_device(struct sbus_dev *, struct scatterlist *, int, int); - -/* Eric Brower (ebrower@usa.net) - * Translate SBus interrupt levels to ino values-- - * this is used when converting sbus "interrupts" OBP - * node values to "intr" node values, and is platform - * dependent. If only we could call OBP with - * "sbus-intr>cpu (sbint -- ino)" from kernel... - * See .../drivers/sbus/sbus.c for details. - */ -BTFIXUPDEF_CALL(unsigned int, sbint_to_irq, struct sbus_dev *sdev, unsigned int) -#define sbint_to_irq(sdev, sbint) BTFIXUP_CALL(sbint_to_irq)(sdev, sbint) - -extern void sbus_arch_bus_ranges_init(struct device_node *, struct sbus_bus *); -extern void sbus_setup_iommu(struct sbus_bus *, struct device_node *); -extern void sbus_setup_arch_props(struct sbus_bus *, struct device_node *); -extern int sbus_arch_preinit(void); -extern void sbus_arch_postinit(void); - -#endif /* !(_SPARC_SBUS_H) */ diff --git a/include/asm-sparc/scatterlist.h b/include/asm-sparc/scatterlist.h deleted file mode 100644 index c82609ca1d0f..000000000000 --- a/include/asm-sparc/scatterlist.h +++ /dev/null @@ -1,26 +0,0 @@ -#ifndef _SPARC_SCATTERLIST_H -#define _SPARC_SCATTERLIST_H - -#include <linux/types.h> - -struct scatterlist { -#ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; -#endif - unsigned long page_link; - unsigned int offset; - - unsigned int length; - - __u32 dvma_address; /* A place to hang host-specific addresses at. */ - __u32 dvma_length; -}; - -#define sg_dma_address(sg) ((sg)->dvma_address) -#define sg_dma_len(sg) ((sg)->dvma_length) - -#define ISA_DMA_THRESHOLD (~0UL) - -#define ARCH_HAS_SG_CHAIN - -#endif /* !(_SPARC_SCATTERLIST_H) */ diff --git a/include/asm-sparc/sections.h b/include/asm-sparc/sections.h deleted file mode 100644 index 6832841df051..000000000000 --- a/include/asm-sparc/sections.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _SPARC_SECTIONS_H -#define _SPARC_SECTIONS_H - -#include <asm-generic/sections.h> - -#endif diff --git a/include/asm-sparc/semaphore.h b/include/asm-sparc/semaphore.h deleted file mode 100644 index d9b2034ed1d2..000000000000 --- a/include/asm-sparc/semaphore.h +++ /dev/null @@ -1 +0,0 @@ -#include <linux/semaphore.h> diff --git a/include/asm-sparc/sembuf.h b/include/asm-sparc/sembuf.h deleted file mode 100644 index a79c4bb3c08a..000000000000 --- a/include/asm-sparc/sembuf.h +++ /dev/null @@ -1,25 +0,0 @@ -#ifndef _SPARC_SEMBUF_H -#define _SPARC_SEMBUF_H - -/* - * The semid64_ds structure for sparc architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct semid64_ds { - struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ - unsigned int __pad1; - __kernel_time_t sem_otime; /* last semop time */ - unsigned int __pad2; - __kernel_time_t sem_ctime; /* last change time */ - unsigned long sem_nsems; /* no. of semaphores in array */ - unsigned long __unused1; - unsigned long __unused2; -}; - -#endif /* _SPARC64_SEMBUF_H */ diff --git a/include/asm-sparc/setup.h b/include/asm-sparc/setup.h deleted file mode 100644 index b3af958a2ad2..000000000000 --- a/include/asm-sparc/setup.h +++ /dev/null @@ -1,10 +0,0 @@ -/* - * Just a place holder. - */ - -#ifndef _SPARC_SETUP_H -#define _SPARC_SETUP_H - -#define COMMAND_LINE_SIZE 256 - -#endif /* _SPARC_SETUP_H */ diff --git a/include/asm-sparc/sfp-machine.h b/include/asm-sparc/sfp-machine.h deleted file mode 100644 index 266a42b8f99f..000000000000 --- a/include/asm-sparc/sfp-machine.h +++ /dev/null @@ -1,212 +0,0 @@ -/* Machine-dependent software floating-point definitions. - Sparc userland (_Q_*) version. - Copyright (C) 1997,1998,1999 Free Software Foundation, Inc. - This file is part of the GNU C Library. - Contributed by Richard Henderson (rth@cygnus.com), - Jakub Jelinek (jj@ultra.linux.cz), - David S. Miller (davem@redhat.com) and - Peter Maydell (pmaydell@chiark.greenend.org.uk). - - The GNU C Library is free software; you can redistribute it and/or - modify it under the terms of the GNU Library General Public License as - published by the Free Software Foundation; either version 2 of the - License, or (at your option) any later version. - - The GNU C Library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Library General Public License for more details. - - You should have received a copy of the GNU Library General Public - License along with the GNU C Library; see the file COPYING.LIB. If - not, write to the Free Software Foundation, Inc., - 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ - -#ifndef _SFP_MACHINE_H -#define _SFP_MACHINE_H - - -#define _FP_W_TYPE_SIZE 32 -#define _FP_W_TYPE unsigned long -#define _FP_WS_TYPE signed long -#define _FP_I_TYPE long - -#define _FP_MUL_MEAT_S(R,X,Y) \ - _FP_MUL_MEAT_1_wide(_FP_WFRACBITS_S,R,X,Y,umul_ppmm) -#define _FP_MUL_MEAT_D(R,X,Y) \ - _FP_MUL_MEAT_2_wide(_FP_WFRACBITS_D,R,X,Y,umul_ppmm) -#define _FP_MUL_MEAT_Q(R,X,Y) \ - _FP_MUL_MEAT_4_wide(_FP_WFRACBITS_Q,R,X,Y,umul_ppmm) - -#define _FP_DIV_MEAT_S(R,X,Y) _FP_DIV_MEAT_1_udiv(S,R,X,Y) -#define _FP_DIV_MEAT_D(R,X,Y) _FP_DIV_MEAT_2_udiv(D,R,X,Y) -#define _FP_DIV_MEAT_Q(R,X,Y) _FP_DIV_MEAT_4_udiv(Q,R,X,Y) - -#define _FP_NANFRAC_S ((_FP_QNANBIT_S << 1) - 1) -#define _FP_NANFRAC_D ((_FP_QNANBIT_D << 1) - 1), -1 -#define _FP_NANFRAC_Q ((_FP_QNANBIT_Q << 1) - 1), -1, -1, -1 -#define _FP_NANSIGN_S 0 -#define _FP_NANSIGN_D 0 -#define _FP_NANSIGN_Q 0 - -#define _FP_KEEPNANFRACP 1 - -/* If one NaN is signaling and the other is not, - * we choose that one, otherwise we choose X. - */ -/* For _Qp_* and _Q_*, this should prefer X, for - * CPU instruction emulation this should prefer Y. - * (see SPAMv9 B.2.2 section). - */ -#define _FP_CHOOSENAN(fs, wc, R, X, Y, OP) \ - do { \ - if ((_FP_FRAC_HIGH_RAW_##fs(Y) & _FP_QNANBIT_##fs) \ - && !(_FP_FRAC_HIGH_RAW_##fs(X) & _FP_QNANBIT_##fs)) \ - { \ - R##_s = X##_s; \ - _FP_FRAC_COPY_##wc(R,X); \ - } \ - else \ - { \ - R##_s = Y##_s; \ - _FP_FRAC_COPY_##wc(R,Y); \ - } \ - R##_c = FP_CLS_NAN; \ - } while (0) - -/* Some assembly to speed things up. */ -#define __FP_FRAC_ADD_3(r2,r1,r0,x2,x1,x0,y2,y1,y0) \ - __asm__ ("addcc %r7,%8,%2\n\t" \ - "addxcc %r5,%6,%1\n\t" \ - "addx %r3,%4,%0\n" \ - : "=r" ((USItype)(r2)), \ - "=&r" ((USItype)(r1)), \ - "=&r" ((USItype)(r0)) \ - : "%rJ" ((USItype)(x2)), \ - "rI" ((USItype)(y2)), \ - "%rJ" ((USItype)(x1)), \ - "rI" ((USItype)(y1)), \ - "%rJ" ((USItype)(x0)), \ - "rI" ((USItype)(y0)) \ - : "cc") - -#define __FP_FRAC_SUB_3(r2,r1,r0,x2,x1,x0,y2,y1,y0) \ - __asm__ ("subcc %r7,%8,%2\n\t" \ - "subxcc %r5,%6,%1\n\t" \ - "subx %r3,%4,%0\n" \ - : "=r" ((USItype)(r2)), \ - "=&r" ((USItype)(r1)), \ - "=&r" ((USItype)(r0)) \ - : "%rJ" ((USItype)(x2)), \ - "rI" ((USItype)(y2)), \ - "%rJ" ((USItype)(x1)), \ - "rI" ((USItype)(y1)), \ - "%rJ" ((USItype)(x0)), \ - "rI" ((USItype)(y0)) \ - : "cc") - -#define __FP_FRAC_ADD_4(r3,r2,r1,r0,x3,x2,x1,x0,y3,y2,y1,y0) \ - do { \ - /* We need to fool gcc, as we need to pass more than 10 \ - input/outputs. */ \ - register USItype _t1 __asm__ ("g1"), _t2 __asm__ ("g2"); \ - __asm__ __volatile__ ( \ - "addcc %r8,%9,%1\n\t" \ - "addxcc %r6,%7,%0\n\t" \ - "addxcc %r4,%5,%%g2\n\t" \ - "addx %r2,%3,%%g1\n\t" \ - : "=&r" ((USItype)(r1)), \ - "=&r" ((USItype)(r0)) \ - : "%rJ" ((USItype)(x3)), \ - "rI" ((USItype)(y3)), \ - "%rJ" ((USItype)(x2)), \ - "rI" ((USItype)(y2)), \ - "%rJ" ((USItype)(x1)), \ - "rI" ((USItype)(y1)), \ - "%rJ" ((USItype)(x0)), \ - "rI" ((USItype)(y0)) \ - : "cc", "g1", "g2"); \ - __asm__ __volatile__ ("" : "=r" (_t1), "=r" (_t2)); \ - r3 = _t1; r2 = _t2; \ - } while (0) - -#define __FP_FRAC_SUB_4(r3,r2,r1,r0,x3,x2,x1,x0,y3,y2,y1,y0) \ - do { \ - /* We need to fool gcc, as we need to pass more than 10 \ - input/outputs. */ \ - register USItype _t1 __asm__ ("g1"), _t2 __asm__ ("g2"); \ - __asm__ __volatile__ ( \ - "subcc %r8,%9,%1\n\t" \ - "subxcc %r6,%7,%0\n\t" \ - "subxcc %r4,%5,%%g2\n\t" \ - "subx %r2,%3,%%g1\n\t" \ - : "=&r" ((USItype)(r1)), \ - "=&r" ((USItype)(r0)) \ - : "%rJ" ((USItype)(x3)), \ - "rI" ((USItype)(y3)), \ - "%rJ" ((USItype)(x2)), \ - "rI" ((USItype)(y2)), \ - "%rJ" ((USItype)(x1)), \ - "rI" ((USItype)(y1)), \ - "%rJ" ((USItype)(x0)), \ - "rI" ((USItype)(y0)) \ - : "cc", "g1", "g2"); \ - __asm__ __volatile__ ("" : "=r" (_t1), "=r" (_t2)); \ - r3 = _t1; r2 = _t2; \ - } while (0) - -#define __FP_FRAC_DEC_3(x2,x1,x0,y2,y1,y0) __FP_FRAC_SUB_3(x2,x1,x0,x2,x1,x0,y2,y1,y0) - -#define __FP_FRAC_DEC_4(x3,x2,x1,x0,y3,y2,y1,y0) __FP_FRAC_SUB_4(x3,x2,x1,x0,x3,x2,x1,x0,y3,y2,y1,y0) - -#define __FP_FRAC_ADDI_4(x3,x2,x1,x0,i) \ - __asm__ ("addcc %3,%4,%3\n\t" \ - "addxcc %2,%%g0,%2\n\t" \ - "addxcc %1,%%g0,%1\n\t" \ - "addx %0,%%g0,%0\n\t" \ - : "=&r" ((USItype)(x3)), \ - "=&r" ((USItype)(x2)), \ - "=&r" ((USItype)(x1)), \ - "=&r" ((USItype)(x0)) \ - : "rI" ((USItype)(i)), \ - "0" ((USItype)(x3)), \ - "1" ((USItype)(x2)), \ - "2" ((USItype)(x1)), \ - "3" ((USItype)(x0)) \ - : "cc") - -#ifndef CONFIG_SMP -extern struct task_struct *last_task_used_math; -#endif - -/* Obtain the current rounding mode. */ -#ifndef FP_ROUNDMODE -#ifdef CONFIG_SMP -#define FP_ROUNDMODE ((current->thread.fsr >> 30) & 0x3) -#else -#define FP_ROUNDMODE ((last_task_used_math->thread.fsr >> 30) & 0x3) -#endif -#endif - -/* Exception flags. */ -#define FP_EX_INVALID (1 << 4) -#define FP_EX_OVERFLOW (1 << 3) -#define FP_EX_UNDERFLOW (1 << 2) -#define FP_EX_DIVZERO (1 << 1) -#define FP_EX_INEXACT (1 << 0) - -#define FP_HANDLE_EXCEPTIONS return _fex - -#ifdef CONFIG_SMP -#define FP_INHIBIT_RESULTS ((current->thread.fsr >> 23) & _fex) -#else -#define FP_INHIBIT_RESULTS ((last_task_used_math->thread.fsr >> 23) & _fex) -#endif - -#ifdef CONFIG_SMP -#define FP_TRAPPING_EXCEPTIONS ((current->thread.fsr >> 23) & 0x1f) -#else -#define FP_TRAPPING_EXCEPTIONS ((last_task_used_math->thread.fsr >> 23) & 0x1f) -#endif - -#endif diff --git a/include/asm-sparc/shmbuf.h b/include/asm-sparc/shmbuf.h deleted file mode 100644 index 1ff9da8bec73..000000000000 --- a/include/asm-sparc/shmbuf.h +++ /dev/null @@ -1,42 +0,0 @@ -#ifndef _SPARC_SHMBUF_H -#define _SPARC_SHMBUF_H - -/* - * The shmid64_ds structure for sparc architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct shmid64_ds { - struct ipc64_perm shm_perm; /* operation perms */ - unsigned int __pad1; - __kernel_time_t shm_atime; /* last attach time */ - unsigned int __pad2; - __kernel_time_t shm_dtime; /* last detach time */ - unsigned int __pad3; - __kernel_time_t shm_ctime; /* last change time */ - size_t shm_segsz; /* size of segment (bytes) */ - __kernel_pid_t shm_cpid; /* pid of creator */ - __kernel_pid_t shm_lpid; /* pid of last operator */ - unsigned long shm_nattch; /* no. of current attaches */ - unsigned long __unused1; - unsigned long __unused2; -}; - -struct shminfo64 { - unsigned long shmmax; - unsigned long shmmin; - unsigned long shmmni; - unsigned long shmseg; - unsigned long shmall; - unsigned long __unused1; - unsigned long __unused2; - unsigned long __unused3; - unsigned long __unused4; -}; - -#endif /* _SPARC_SHMBUF_H */ diff --git a/include/asm-sparc/shmparam.h b/include/asm-sparc/shmparam.h deleted file mode 100644 index 59a1243c12f3..000000000000 --- a/include/asm-sparc/shmparam.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef _ASMSPARC_SHMPARAM_H -#define _ASMSPARC_SHMPARAM_H - -#define __ARCH_FORCE_SHMLBA 1 - -extern int vac_cache_size; -#define SHMLBA (vac_cache_size ? vac_cache_size : \ - (sparc_cpu_model == sun4c ? (64 * 1024) : \ - (sparc_cpu_model == sun4 ? (128 * 1024) : PAGE_SIZE))) - -#endif /* _ASMSPARC_SHMPARAM_H */ diff --git a/include/asm-sparc/sigcontext.h b/include/asm-sparc/sigcontext.h deleted file mode 100644 index c5fb60dcbd75..000000000000 --- a/include/asm-sparc/sigcontext.h +++ /dev/null @@ -1,62 +0,0 @@ -#ifndef __SPARC_SIGCONTEXT_H -#define __SPARC_SIGCONTEXT_H - -#ifdef __KERNEL__ -#include <asm/ptrace.h> - -#ifndef __ASSEMBLY__ - -#define __SUNOS_MAXWIN 31 - -/* This is what SunOS does, so shall I. */ -struct sigcontext { - int sigc_onstack; /* state to restore */ - int sigc_mask; /* sigmask to restore */ - int sigc_sp; /* stack pointer */ - int sigc_pc; /* program counter */ - int sigc_npc; /* next program counter */ - int sigc_psr; /* for condition codes etc */ - int sigc_g1; /* User uses these two registers */ - int sigc_o0; /* within the trampoline code. */ - - /* Now comes information regarding the users window set - * at the time of the signal. - */ - int sigc_oswins; /* outstanding windows */ - - /* stack ptrs for each regwin buf */ - char *sigc_spbuf[__SUNOS_MAXWIN]; - - /* Windows to restore after signal */ - struct { - unsigned long locals[8]; - unsigned long ins[8]; - } sigc_wbuf[__SUNOS_MAXWIN]; -}; - -typedef struct { - struct { - unsigned long psr; - unsigned long pc; - unsigned long npc; - unsigned long y; - unsigned long u_regs[16]; /* globals and ins */ - } si_regs; - int si_mask; -} __siginfo_t; - -typedef struct { - unsigned long si_float_regs [32]; - unsigned long si_fsr; - unsigned long si_fpqdepth; - struct { - unsigned long *insn_addr; - unsigned long insn; - } si_fpqueue [16]; -} __siginfo_fpu_t; - -#endif /* !(__ASSEMBLY__) */ - -#endif /* (__KERNEL__) */ - -#endif /* !(__SPARC_SIGCONTEXT_H) */ diff --git a/include/asm-sparc/siginfo.h b/include/asm-sparc/siginfo.h deleted file mode 100644 index 3c71af135c52..000000000000 --- a/include/asm-sparc/siginfo.h +++ /dev/null @@ -1,17 +0,0 @@ -#ifndef _SPARC_SIGINFO_H -#define _SPARC_SIGINFO_H - -#define __ARCH_SI_UID_T unsigned int -#define __ARCH_SI_TRAPNO - -#include <asm-generic/siginfo.h> - -#define SI_NOINFO 32767 /* no information in siginfo_t */ - -/* - * SIGEMT si_codes - */ -#define EMT_TAGOVF (__SI_FAULT|1) /* tag overflow */ -#define NSIGEMT 1 - -#endif /* !(_SPARC_SIGINFO_H) */ diff --git a/include/asm-sparc/signal.h b/include/asm-sparc/signal.h deleted file mode 100644 index 683657d6e685..000000000000 --- a/include/asm-sparc/signal.h +++ /dev/null @@ -1,207 +0,0 @@ -#ifndef _ASMSPARC_SIGNAL_H -#define _ASMSPARC_SIGNAL_H - -#include <asm/sigcontext.h> -#include <linux/compiler.h> - -#ifdef __KERNEL__ -#ifndef __ASSEMBLY__ -#include <linux/personality.h> -#include <linux/types.h> -#endif -#endif - -/* On the Sparc the signal handlers get passed a 'sub-signal' code - * for certain signal types, which we document here. - */ -#define SIGHUP 1 -#define SIGINT 2 -#define SIGQUIT 3 -#define SIGILL 4 -#define SUBSIG_STACK 0 -#define SUBSIG_ILLINST 2 -#define SUBSIG_PRIVINST 3 -#define SUBSIG_BADTRAP(t) (0x80 + (t)) - -#define SIGTRAP 5 -#define SIGABRT 6 -#define SIGIOT 6 - -#define SIGEMT 7 -#define SUBSIG_TAG 10 - -#define SIGFPE 8 -#define SUBSIG_FPDISABLED 0x400 -#define SUBSIG_FPERROR 0x404 -#define SUBSIG_FPINTOVFL 0x001 -#define SUBSIG_FPSTSIG 0x002 -#define SUBSIG_IDIVZERO 0x014 -#define SUBSIG_FPINEXACT 0x0c4 -#define SUBSIG_FPDIVZERO 0x0c8 -#define SUBSIG_FPUNFLOW 0x0cc -#define SUBSIG_FPOPERROR 0x0d0 -#define SUBSIG_FPOVFLOW 0x0d4 - -#define SIGKILL 9 -#define SIGBUS 10 -#define SUBSIG_BUSTIMEOUT 1 -#define SUBSIG_ALIGNMENT 2 -#define SUBSIG_MISCERROR 5 - -#define SIGSEGV 11 -#define SUBSIG_NOMAPPING 3 -#define SUBSIG_PROTECTION 4 -#define SUBSIG_SEGERROR 5 - -#define SIGSYS 12 - -#define SIGPIPE 13 -#define SIGALRM 14 -#define SIGTERM 15 -#define SIGURG 16 - -/* SunOS values which deviate from the Linux/i386 ones */ -#define SIGSTOP 17 -#define SIGTSTP 18 -#define SIGCONT 19 -#define SIGCHLD 20 -#define SIGTTIN 21 -#define SIGTTOU 22 -#define SIGIO 23 -#define SIGPOLL SIGIO /* SysV name for SIGIO */ -#define SIGXCPU 24 -#define SIGXFSZ 25 -#define SIGVTALRM 26 -#define SIGPROF 27 -#define SIGWINCH 28 -#define SIGLOST 29 -#define SIGPWR SIGLOST -#define SIGUSR1 30 -#define SIGUSR2 31 - -/* Most things should be clean enough to redefine this at will, if care - * is taken to make libc match. - */ - -#define __OLD_NSIG 32 -#define __NEW_NSIG 64 -#define _NSIG_BPW 32 -#define _NSIG_WORDS (__NEW_NSIG / _NSIG_BPW) - -#define SIGRTMIN 32 -#define SIGRTMAX __NEW_NSIG - -#if defined(__KERNEL__) || defined(__WANT_POSIX1B_SIGNALS__) -#define _NSIG __NEW_NSIG -#define __new_sigset_t sigset_t -#define __new_sigaction sigaction -#define __old_sigset_t old_sigset_t -#define __old_sigaction old_sigaction -#else -#define _NSIG __OLD_NSIG -#define __old_sigset_t sigset_t -#define __old_sigaction sigaction -#endif - -#ifndef __ASSEMBLY__ - -typedef unsigned long __old_sigset_t; - -typedef struct { - unsigned long sig[_NSIG_WORDS]; -} __new_sigset_t; - - -#ifdef __KERNEL__ -/* A SunOS sigstack */ -struct sigstack { - char *the_stack; - int cur_status; -}; -#endif - -/* Sigvec flags */ -#define _SV_SSTACK 1u /* This signal handler should use sig-stack */ -#define _SV_INTR 2u /* Sig return should not restart system call */ -#define _SV_RESET 4u /* Set handler to SIG_DFL upon taken signal */ -#define _SV_IGNCHILD 8u /* Do not send SIGCHLD */ - -/* - * sa_flags values: SA_STACK is not currently supported, but will allow the - * usage of signal stacks by using the (now obsolete) sa_restorer field in - * the sigaction structure as a stack pointer. This is now possible due to - * the changes in signal handling. LBT 010493. - * SA_RESTART flag to get restarting signals (which were the default long ago) - */ -#define SA_NOCLDSTOP _SV_IGNCHILD -#define SA_STACK _SV_SSTACK -#define SA_ONSTACK _SV_SSTACK -#define SA_RESTART _SV_INTR -#define SA_ONESHOT _SV_RESET -#define SA_NOMASK 0x20u -#define SA_NOCLDWAIT 0x100u -#define SA_SIGINFO 0x200u - -#define SIG_BLOCK 0x01 /* for blocking signals */ -#define SIG_UNBLOCK 0x02 /* for unblocking signals */ -#define SIG_SETMASK 0x04 /* for setting the signal mask */ - -/* - * sigaltstack controls - */ -#define SS_ONSTACK 1 -#define SS_DISABLE 2 - -#define MINSIGSTKSZ 4096 -#define SIGSTKSZ 16384 - -#ifdef __KERNEL__ -/* - * DJHR - * SA_STATIC_ALLOC is used for the SPARC system to indicate that this - * interrupt handler's irq structure should be statically allocated - * by the request_irq routine. - * The alternative is that arch/sparc/kernel/irq.c has carnal knowledge - * of interrupt usage and that sucks. Also without a flag like this - * it may be possible for the free_irq routine to attempt to free - * statically allocated data.. which is NOT GOOD. - * - */ -#define SA_STATIC_ALLOC 0x8000 -#endif - -#include <asm-generic/signal.h> - -#ifdef __KERNEL__ -struct __new_sigaction { - __sighandler_t sa_handler; - unsigned long sa_flags; - void (*sa_restorer)(void); /* Not used by Linux/SPARC */ - __new_sigset_t sa_mask; -}; - -struct k_sigaction { - struct __new_sigaction sa; - void __user *ka_restorer; -}; - -struct __old_sigaction { - __sighandler_t sa_handler; - __old_sigset_t sa_mask; - unsigned long sa_flags; - void (*sa_restorer) (void); /* not used by Linux/SPARC */ -}; - -typedef struct sigaltstack { - void __user *ss_sp; - int ss_flags; - size_t ss_size; -} stack_t; - -#define ptrace_signal_deliver(regs, cookie) do { } while (0) - -#endif /* !(__KERNEL__) */ - -#endif /* !(__ASSEMBLY__) */ - -#endif /* !(_ASMSPARC_SIGNAL_H) */ diff --git a/include/asm-sparc/smp.h b/include/asm-sparc/smp.h deleted file mode 100644 index b61e74bea06a..000000000000 --- a/include/asm-sparc/smp.h +++ /dev/null @@ -1,173 +0,0 @@ -/* smp.h: Sparc specific SMP stuff. - * - * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu) - */ - -#ifndef _SPARC_SMP_H -#define _SPARC_SMP_H - -#include <linux/threads.h> -#include <asm/head.h> -#include <asm/btfixup.h> - -#ifndef __ASSEMBLY__ - -#include <linux/cpumask.h> - -#endif /* __ASSEMBLY__ */ - -#ifdef CONFIG_SMP - -#ifndef __ASSEMBLY__ - -#include <asm/ptrace.h> -#include <asm/asi.h> -#include <asm/atomic.h> - -/* - * Private routines/data - */ - -extern unsigned char boot_cpu_id; -extern cpumask_t phys_cpu_present_map; -#define cpu_possible_map phys_cpu_present_map - -typedef void (*smpfunc_t)(unsigned long, unsigned long, unsigned long, - unsigned long, unsigned long); - -/* - * General functions that each host system must provide. - */ - -void sun4m_init_smp(void); -void sun4d_init_smp(void); - -void smp_callin(void); -void smp_boot_cpus(void); -void smp_store_cpu_info(int); - -struct seq_file; -void smp_bogo(struct seq_file *); -void smp_info(struct seq_file *); - -BTFIXUPDEF_CALL(void, smp_cross_call, smpfunc_t, unsigned long, unsigned long, unsigned long, unsigned long, unsigned long) -BTFIXUPDEF_CALL(int, __hard_smp_processor_id, void) -BTFIXUPDEF_BLACKBOX(hard_smp_processor_id) -BTFIXUPDEF_BLACKBOX(load_current) - -#define smp_cross_call(func,arg1,arg2,arg3,arg4,arg5) BTFIXUP_CALL(smp_cross_call)(func,arg1,arg2,arg3,arg4,arg5) - -static inline void xc0(smpfunc_t func) { smp_cross_call(func, 0, 0, 0, 0, 0); } -static inline void xc1(smpfunc_t func, unsigned long arg1) -{ smp_cross_call(func, arg1, 0, 0, 0, 0); } -static inline void xc2(smpfunc_t func, unsigned long arg1, unsigned long arg2) -{ smp_cross_call(func, arg1, arg2, 0, 0, 0); } -static inline void xc3(smpfunc_t func, unsigned long arg1, unsigned long arg2, - unsigned long arg3) -{ smp_cross_call(func, arg1, arg2, arg3, 0, 0); } -static inline void xc4(smpfunc_t func, unsigned long arg1, unsigned long arg2, - unsigned long arg3, unsigned long arg4) -{ smp_cross_call(func, arg1, arg2, arg3, arg4, 0); } -static inline void xc5(smpfunc_t func, unsigned long arg1, unsigned long arg2, - unsigned long arg3, unsigned long arg4, unsigned long arg5) -{ smp_cross_call(func, arg1, arg2, arg3, arg4, arg5); } - -static inline int smp_call_function(void (*func)(void *info), void *info, int wait) -{ - xc1((smpfunc_t)func, (unsigned long)info); - return 0; -} - -static inline int cpu_logical_map(int cpu) -{ - return cpu; -} - -static inline int hard_smp4m_processor_id(void) -{ - int cpuid; - - __asm__ __volatile__("rd %%tbr, %0\n\t" - "srl %0, 12, %0\n\t" - "and %0, 3, %0\n\t" : - "=&r" (cpuid)); - return cpuid; -} - -static inline int hard_smp4d_processor_id(void) -{ - int cpuid; - - __asm__ __volatile__("lda [%%g0] %1, %0\n\t" : - "=&r" (cpuid) : "i" (ASI_M_VIKING_TMP1)); - return cpuid; -} - -#ifndef MODULE -static inline int hard_smp_processor_id(void) -{ - int cpuid; - - /* Black box - sun4m - __asm__ __volatile__("rd %%tbr, %0\n\t" - "srl %0, 12, %0\n\t" - "and %0, 3, %0\n\t" : - "=&r" (cpuid)); - - sun4d - __asm__ __volatile__("lda [%g0] ASI_M_VIKING_TMP1, %0\n\t" - "nop; nop" : - "=&r" (cpuid)); - See btfixup.h and btfixupprep.c to understand how a blackbox works. - */ - __asm__ __volatile__("sethi %%hi(___b_hard_smp_processor_id), %0\n\t" - "sethi %%hi(boot_cpu_id), %0\n\t" - "ldub [%0 + %%lo(boot_cpu_id)], %0\n\t" : - "=&r" (cpuid)); - return cpuid; -} -#else -static inline int hard_smp_processor_id(void) -{ - int cpuid; - - __asm__ __volatile__("mov %%o7, %%g1\n\t" - "call ___f___hard_smp_processor_id\n\t" - " nop\n\t" - "mov %%g2, %0\n\t" : "=r"(cpuid) : : "g1", "g2"); - return cpuid; -} -#endif - -#define raw_smp_processor_id() (current_thread_info()->cpu) - -#define prof_multiplier(__cpu) cpu_data(__cpu).multiplier -#define prof_counter(__cpu) cpu_data(__cpu).counter - -void smp_setup_cpu_possible_map(void); - -#endif /* !(__ASSEMBLY__) */ - -/* Sparc specific messages. */ -#define MSG_CROSS_CALL 0x0005 /* run func on cpus */ - -/* Empirical PROM processor mailbox constants. If the per-cpu mailbox - * contains something other than one of these then the ipi is from - * Linux's active_kernel_processor. This facility exists so that - * the boot monitor can capture all the other cpus when one catches - * a watchdog reset or the user enters the monitor using L1-A keys. - */ -#define MBOX_STOPCPU 0xFB -#define MBOX_IDLECPU 0xFC -#define MBOX_IDLECPU2 0xFD -#define MBOX_STOPCPU2 0xFE - -#else /* SMP */ - -#define hard_smp_processor_id() 0 -#define smp_setup_cpu_possible_map() do { } while (0) - -#endif /* !(SMP) */ - -#define NO_PROC_ID 0xFF - -#endif /* !(_SPARC_SMP_H) */ diff --git a/include/asm-sparc/smpprim.h b/include/asm-sparc/smpprim.h deleted file mode 100644 index eb849d862c64..000000000000 --- a/include/asm-sparc/smpprim.h +++ /dev/null @@ -1,54 +0,0 @@ -/* - * smpprim.h: SMP locking primitives on the Sparc - * - * God knows we won't be actually using this code for some time - * but I thought I'd write it since I knew how. - * - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - */ - -#ifndef __SPARC_SMPPRIM_H -#define __SPARC_SMPPRIM_H - -/* Test and set the unsigned byte at ADDR to 1. Returns the previous - * value. On the Sparc we use the ldstub instruction since it is - * atomic. - */ - -static inline __volatile__ char test_and_set(void *addr) -{ - char state = 0; - - __asm__ __volatile__("ldstub [%0], %1 ! test_and_set\n\t" - "=r" (addr), "=r" (state) : - "0" (addr), "1" (state) : "memory"); - - return state; -} - -/* Initialize a spin-lock. */ -static inline __volatile__ smp_initlock(void *spinlock) -{ - /* Unset the lock. */ - *((unsigned char *) spinlock) = 0; - - return; -} - -/* This routine spins until it acquires the lock at ADDR. */ -static inline __volatile__ smp_lock(void *addr) -{ - while(test_and_set(addr) == 0xff) - ; - - /* We now have the lock */ - return; -} - -/* This routine releases the lock at ADDR. */ -static inline __volatile__ smp_unlock(void *addr) -{ - *((unsigned char *) addr) = 0; -} - -#endif /* !(__SPARC_SMPPRIM_H) */ diff --git a/include/asm-sparc/socket.h b/include/asm-sparc/socket.h deleted file mode 100644 index bf50d0c2d583..000000000000 --- a/include/asm-sparc/socket.h +++ /dev/null @@ -1,58 +0,0 @@ -#ifndef _ASM_SOCKET_H -#define _ASM_SOCKET_H - -#include <asm/sockios.h> - -/* For setsockopt(2) */ -#define SOL_SOCKET 0xffff - -#define SO_DEBUG 0x0001 -#define SO_PASSCRED 0x0002 -#define SO_REUSEADDR 0x0004 -#define SO_KEEPALIVE 0x0008 -#define SO_DONTROUTE 0x0010 -#define SO_BROADCAST 0x0020 -#define SO_PEERCRED 0x0040 -#define SO_LINGER 0x0080 -#define SO_OOBINLINE 0x0100 -/* To add :#define SO_REUSEPORT 0x0200 */ -#define SO_BSDCOMPAT 0x0400 -#define SO_RCVLOWAT 0x0800 -#define SO_SNDLOWAT 0x1000 -#define SO_RCVTIMEO 0x2000 -#define SO_SNDTIMEO 0x4000 -#define SO_ACCEPTCONN 0x8000 - -#define SO_SNDBUF 0x1001 -#define SO_RCVBUF 0x1002 -#define SO_SNDBUFFORCE 0x100a -#define SO_RCVBUFFORCE 0x100b -#define SO_ERROR 0x1007 -#define SO_TYPE 0x1008 - -/* Linux specific, keep the same. */ -#define SO_NO_CHECK 0x000b -#define SO_PRIORITY 0x000c - -#define SO_BINDTODEVICE 0x000d - -#define SO_ATTACH_FILTER 0x001a -#define SO_DETACH_FILTER 0x001b - -#define SO_PEERNAME 0x001c -#define SO_TIMESTAMP 0x001d -#define SCM_TIMESTAMP SO_TIMESTAMP - -#define SO_PEERSEC 0x001e -#define SO_PASSSEC 0x001f -#define SO_TIMESTAMPNS 0x0021 -#define SCM_TIMESTAMPNS SO_TIMESTAMPNS - -#define SO_MARK 0x0022 - -/* Security levels - as per NRL IPv6 - don't actually do anything */ -#define SO_SECURITY_AUTHENTICATION 0x5001 -#define SO_SECURITY_ENCRYPTION_TRANSPORT 0x5002 -#define SO_SECURITY_ENCRYPTION_NETWORK 0x5004 - -#endif /* _ASM_SOCKET_H */ diff --git a/include/asm-sparc/sockios.h b/include/asm-sparc/sockios.h deleted file mode 100644 index 990ea746486b..000000000000 --- a/include/asm-sparc/sockios.h +++ /dev/null @@ -1,14 +0,0 @@ -#ifndef _ASM_SPARC_SOCKIOS_H -#define _ASM_SPARC_SOCKIOS_H - -/* Socket-level I/O control calls. */ -#define FIOSETOWN 0x8901 -#define SIOCSPGRP 0x8902 -#define FIOGETOWN 0x8903 -#define SIOCGPGRP 0x8904 -#define SIOCATMARK 0x8905 -#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */ -#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ - -#endif /* !(_ASM_SPARC_SOCKIOS_H) */ - diff --git a/include/asm-sparc/spinlock.h b/include/asm-sparc/spinlock.h deleted file mode 100644 index de2249b267c6..000000000000 --- a/include/asm-sparc/spinlock.h +++ /dev/null @@ -1,192 +0,0 @@ -/* spinlock.h: 32-bit Sparc spinlock support. - * - * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu) - */ - -#ifndef __SPARC_SPINLOCK_H -#define __SPARC_SPINLOCK_H - -#include <linux/threads.h> /* For NR_CPUS */ - -#ifndef __ASSEMBLY__ - -#include <asm/psr.h> - -#define __raw_spin_is_locked(lock) (*((volatile unsigned char *)(lock)) != 0) - -#define __raw_spin_unlock_wait(lock) \ - do { while (__raw_spin_is_locked(lock)) cpu_relax(); } while (0) - -static inline void __raw_spin_lock(raw_spinlock_t *lock) -{ - __asm__ __volatile__( - "\n1:\n\t" - "ldstub [%0], %%g2\n\t" - "orcc %%g2, 0x0, %%g0\n\t" - "bne,a 2f\n\t" - " ldub [%0], %%g2\n\t" - ".subsection 2\n" - "2:\n\t" - "orcc %%g2, 0x0, %%g0\n\t" - "bne,a 2b\n\t" - " ldub [%0], %%g2\n\t" - "b,a 1b\n\t" - ".previous\n" - : /* no outputs */ - : "r" (lock) - : "g2", "memory", "cc"); -} - -static inline int __raw_spin_trylock(raw_spinlock_t *lock) -{ - unsigned int result; - __asm__ __volatile__("ldstub [%1], %0" - : "=r" (result) - : "r" (lock) - : "memory"); - return (result == 0); -} - -static inline void __raw_spin_unlock(raw_spinlock_t *lock) -{ - __asm__ __volatile__("stb %%g0, [%0]" : : "r" (lock) : "memory"); -} - -/* Read-write spinlocks, allowing multiple readers - * but only one writer. - * - * NOTE! it is quite common to have readers in interrupts - * but no interrupt writers. For those circumstances we - * can "mix" irq-safe locks - any writer needs to get a - * irq-safe write-lock, but readers can get non-irqsafe - * read-locks. - * - * XXX This might create some problems with my dual spinlock - * XXX scheme, deadlocks etc. -DaveM - * - * Sort of like atomic_t's on Sparc, but even more clever. - * - * ------------------------------------ - * | 24-bit counter | wlock | raw_rwlock_t - * ------------------------------------ - * 31 8 7 0 - * - * wlock signifies the one writer is in or somebody is updating - * counter. For a writer, if he successfully acquires the wlock, - * but counter is non-zero, he has to release the lock and wait, - * till both counter and wlock are zero. - * - * Unfortunately this scheme limits us to ~16,000,000 cpus. - */ -static inline void __read_lock(raw_rwlock_t *rw) -{ - register raw_rwlock_t *lp asm("g1"); - lp = rw; - __asm__ __volatile__( - "mov %%o7, %%g4\n\t" - "call ___rw_read_enter\n\t" - " ldstub [%%g1 + 3], %%g2\n" - : /* no outputs */ - : "r" (lp) - : "g2", "g4", "memory", "cc"); -} - -#define __raw_read_lock(lock) \ -do { unsigned long flags; \ - local_irq_save(flags); \ - __read_lock(lock); \ - local_irq_restore(flags); \ -} while(0) - -static inline void __read_unlock(raw_rwlock_t *rw) -{ - register raw_rwlock_t *lp asm("g1"); - lp = rw; - __asm__ __volatile__( - "mov %%o7, %%g4\n\t" - "call ___rw_read_exit\n\t" - " ldstub [%%g1 + 3], %%g2\n" - : /* no outputs */ - : "r" (lp) - : "g2", "g4", "memory", "cc"); -} - -#define __raw_read_unlock(lock) \ -do { unsigned long flags; \ - local_irq_save(flags); \ - __read_unlock(lock); \ - local_irq_restore(flags); \ -} while(0) - -static inline void __raw_write_lock(raw_rwlock_t *rw) -{ - register raw_rwlock_t *lp asm("g1"); - lp = rw; - __asm__ __volatile__( - "mov %%o7, %%g4\n\t" - "call ___rw_write_enter\n\t" - " ldstub [%%g1 + 3], %%g2\n" - : /* no outputs */ - : "r" (lp) - : "g2", "g4", "memory", "cc"); - *(volatile __u32 *)&lp->lock = ~0U; -} - -static inline int __raw_write_trylock(raw_rwlock_t *rw) -{ - unsigned int val; - - __asm__ __volatile__("ldstub [%1 + 3], %0" - : "=r" (val) - : "r" (&rw->lock) - : "memory"); - - if (val == 0) { - val = rw->lock & ~0xff; - if (val) - ((volatile u8*)&rw->lock)[3] = 0; - else - *(volatile u32*)&rw->lock = ~0U; - } - - return (val == 0); -} - -static inline int __read_trylock(raw_rwlock_t *rw) -{ - register raw_rwlock_t *lp asm("g1"); - register int res asm("o0"); - lp = rw; - __asm__ __volatile__( - "mov %%o7, %%g4\n\t" - "call ___rw_read_try\n\t" - " ldstub [%%g1 + 3], %%g2\n" - : "=r" (res) - : "r" (lp) - : "g2", "g4", "memory", "cc"); - return res; -} - -#define __raw_read_trylock(lock) \ -({ unsigned long flags; \ - int res; \ - local_irq_save(flags); \ - res = __read_trylock(lock); \ - local_irq_restore(flags); \ - res; \ -}) - -#define __raw_write_unlock(rw) do { (rw)->lock = 0; } while(0) - -#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock) - -#define _raw_spin_relax(lock) cpu_relax() -#define _raw_read_relax(lock) cpu_relax() -#define _raw_write_relax(lock) cpu_relax() - -#define __raw_read_can_lock(rw) (!((rw)->lock & 0xff)) -#define __raw_write_can_lock(rw) (!(rw)->lock) - -#endif /* !(__ASSEMBLY__) */ - -#endif /* __SPARC_SPINLOCK_H */ diff --git a/include/asm-sparc/spinlock_types.h b/include/asm-sparc/spinlock_types.h deleted file mode 100644 index 0a0fb116c4ec..000000000000 --- a/include/asm-sparc/spinlock_types.h +++ /dev/null @@ -1,20 +0,0 @@ -#ifndef __SPARC_SPINLOCK_TYPES_H -#define __SPARC_SPINLOCK_TYPES_H - -#ifndef __LINUX_SPINLOCK_TYPES_H -# error "please don't include this file directly" -#endif - -typedef struct { - unsigned char lock; -} raw_spinlock_t; - -#define __RAW_SPIN_LOCK_UNLOCKED { 0 } - -typedef struct { - volatile unsigned int lock; -} raw_rwlock_t; - -#define __RAW_RW_LOCK_UNLOCKED { 0 } - -#endif diff --git a/include/asm-sparc/stat.h b/include/asm-sparc/stat.h deleted file mode 100644 index 2299e1d5d94c..000000000000 --- a/include/asm-sparc/stat.h +++ /dev/null @@ -1,76 +0,0 @@ -#ifndef _SPARC_STAT_H -#define _SPARC_STAT_H - -#include <linux/types.h> - -struct __old_kernel_stat { - unsigned short st_dev; - unsigned short st_ino; - unsigned short st_mode; - unsigned short st_nlink; - unsigned short st_uid; - unsigned short st_gid; - unsigned short st_rdev; - unsigned long st_size; - unsigned long st_atime; - unsigned long st_mtime; - unsigned long st_ctime; -}; - -struct stat { - unsigned short st_dev; - unsigned long st_ino; - unsigned short st_mode; - short st_nlink; - unsigned short st_uid; - unsigned short st_gid; - unsigned short st_rdev; - long st_size; - long st_atime; - unsigned long st_atime_nsec; - long st_mtime; - unsigned long st_mtime_nsec; - long st_ctime; - unsigned long st_ctime_nsec; - long st_blksize; - long st_blocks; - unsigned long __unused4[2]; -}; - -#define STAT_HAVE_NSEC 1 - -struct stat64 { - unsigned long long st_dev; - - unsigned long long st_ino; - - unsigned int st_mode; - unsigned int st_nlink; - - unsigned int st_uid; - unsigned int st_gid; - - unsigned long long st_rdev; - - unsigned char __pad3[8]; - - long long st_size; - unsigned int st_blksize; - - unsigned char __pad4[8]; - unsigned int st_blocks; - - unsigned int st_atime; - unsigned int st_atime_nsec; - - unsigned int st_mtime; - unsigned int st_mtime_nsec; - - unsigned int st_ctime; - unsigned int st_ctime_nsec; - - unsigned int __unused4; - unsigned int __unused5; -}; - -#endif diff --git a/include/asm-sparc/statfs.h b/include/asm-sparc/statfs.h deleted file mode 100644 index 304520fa8863..000000000000 --- a/include/asm-sparc/statfs.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _SPARC_STATFS_H -#define _SPARC_STATFS_H - -#include <asm-generic/statfs.h> - -#endif diff --git a/include/asm-sparc/string.h b/include/asm-sparc/string.h deleted file mode 100644 index 8d7c0dd4f299..000000000000 --- a/include/asm-sparc/string.h +++ /dev/null @@ -1,205 +0,0 @@ -/* - * string.h: External definitions for optimized assembly string - * routines for the Linux Kernel. - * - * Copyright (C) 1995,1996 David S. Miller (davem@caip.rutgers.edu) - * Copyright (C) 1996,1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz) - */ - -#ifndef __SPARC_STRING_H__ -#define __SPARC_STRING_H__ - -#include <asm/page.h> - -/* Really, userland/ksyms should not see any of this stuff. */ - -#ifdef __KERNEL__ - -extern void __memmove(void *,const void *,__kernel_size_t); -extern __kernel_size_t __memcpy(void *,const void *,__kernel_size_t); -extern __kernel_size_t __memset(void *,int,__kernel_size_t); - -#ifndef EXPORT_SYMTAB_STROPS - -/* First the mem*() things. */ -#define __HAVE_ARCH_MEMMOVE -#undef memmove -#define memmove(_to, _from, _n) \ -({ \ - void *_t = (_to); \ - __memmove(_t, (_from), (_n)); \ - _t; \ -}) - -#define __HAVE_ARCH_MEMCPY - -static inline void *__constant_memcpy(void *to, const void *from, __kernel_size_t n) -{ - extern void __copy_1page(void *, const void *); - - if(n <= 32) { - __builtin_memcpy(to, from, n); - } else if (((unsigned int) to & 7) != 0) { - /* Destination is not aligned on the double-word boundary */ - __memcpy(to, from, n); - } else { - switch(n) { - case PAGE_SIZE: - __copy_1page(to, from); - break; - default: - __memcpy(to, from, n); - break; - } - } - return to; -} - -static inline void *__nonconstant_memcpy(void *to, const void *from, __kernel_size_t n) -{ - __memcpy(to, from, n); - return to; -} - -#undef memcpy -#define memcpy(t, f, n) \ -(__builtin_constant_p(n) ? \ - __constant_memcpy((t),(f),(n)) : \ - __nonconstant_memcpy((t),(f),(n))) - -#define __HAVE_ARCH_MEMSET - -static inline void *__constant_c_and_count_memset(void *s, char c, __kernel_size_t count) -{ - extern void bzero_1page(void *); - extern __kernel_size_t __bzero(void *, __kernel_size_t); - - if(!c) { - if(count == PAGE_SIZE) - bzero_1page(s); - else - __bzero(s, count); - } else { - __memset(s, c, count); - } - return s; -} - -static inline void *__constant_c_memset(void *s, char c, __kernel_size_t count) -{ - extern __kernel_size_t __bzero(void *, __kernel_size_t); - - if(!c) - __bzero(s, count); - else - __memset(s, c, count); - return s; -} - -static inline void *__nonconstant_memset(void *s, char c, __kernel_size_t count) -{ - __memset(s, c, count); - return s; -} - -#undef memset -#define memset(s, c, count) \ -(__builtin_constant_p(c) ? (__builtin_constant_p(count) ? \ - __constant_c_and_count_memset((s), (c), (count)) : \ - __constant_c_memset((s), (c), (count))) \ - : __nonconstant_memset((s), (c), (count))) - -#define __HAVE_ARCH_MEMSCAN - -#undef memscan -#define memscan(__arg0, __char, __arg2) \ -({ \ - extern void *__memscan_zero(void *, size_t); \ - extern void *__memscan_generic(void *, int, size_t); \ - void *__retval, *__addr = (__arg0); \ - size_t __size = (__arg2); \ - \ - if(__builtin_constant_p(__char) && !(__char)) \ - __retval = __memscan_zero(__addr, __size); \ - else \ - __retval = __memscan_generic(__addr, (__char), __size); \ - \ - __retval; \ -}) - -#define __HAVE_ARCH_MEMCMP -extern int memcmp(const void *,const void *,__kernel_size_t); - -/* Now the str*() stuff... */ -#define __HAVE_ARCH_STRLEN -extern __kernel_size_t strlen(const char *); - -#define __HAVE_ARCH_STRNCMP - -extern int __strncmp(const char *, const char *, __kernel_size_t); - -static inline int __constant_strncmp(const char *src, const char *dest, __kernel_size_t count) -{ - register int retval; - switch(count) { - case 0: return 0; - case 1: return (src[0] - dest[0]); - case 2: retval = (src[0] - dest[0]); - if(!retval && src[0]) - retval = (src[1] - dest[1]); - return retval; - case 3: retval = (src[0] - dest[0]); - if(!retval && src[0]) { - retval = (src[1] - dest[1]); - if(!retval && src[1]) - retval = (src[2] - dest[2]); - } - return retval; - case 4: retval = (src[0] - dest[0]); - if(!retval && src[0]) { - retval = (src[1] - dest[1]); - if(!retval && src[1]) { - retval = (src[2] - dest[2]); - if (!retval && src[2]) - retval = (src[3] - dest[3]); - } - } - return retval; - case 5: retval = (src[0] - dest[0]); - if(!retval && src[0]) { - retval = (src[1] - dest[1]); - if(!retval && src[1]) { - retval = (src[2] - dest[2]); - if (!retval && src[2]) { - retval = (src[3] - dest[3]); - if (!retval && src[3]) - retval = (src[4] - dest[4]); - } - } - } - return retval; - default: - retval = (src[0] - dest[0]); - if(!retval && src[0]) { - retval = (src[1] - dest[1]); - if(!retval && src[1]) { - retval = (src[2] - dest[2]); - if(!retval && src[2]) - retval = __strncmp(src+3,dest+3,count-3); - } - } - return retval; - } -} - -#undef strncmp -#define strncmp(__arg0, __arg1, __arg2) \ -(__builtin_constant_p(__arg2) ? \ - __constant_strncmp(__arg0, __arg1, __arg2) : \ - __strncmp(__arg0, __arg1, __arg2)) - -#endif /* !EXPORT_SYMTAB_STROPS */ - -#endif /* __KERNEL__ */ - -#endif /* !(__SPARC_STRING_H__) */ diff --git a/include/asm-sparc/sun4paddr.h b/include/asm-sparc/sun4paddr.h deleted file mode 100644 index d52985f19f42..000000000000 --- a/include/asm-sparc/sun4paddr.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * sun4paddr.h: Various physical addresses on sun4 machines - * - * Copyright (C) 1997 Anton Blanchard (anton@progsoc.uts.edu.au) - * Copyright (C) 1998 Chris Davis (cdavis@cois.on.ca) - * - * Now supports more sun4's - */ - -#ifndef _SPARC_SUN4PADDR_H -#define _SPARC_SUN4PADDR_H - -#define SUN4_IE_PHYSADDR 0xf5000000 -#define SUN4_UNUSED_PHYSADDR 0 - -/* these work for me */ -#define SUN4_200_MEMREG_PHYSADDR 0xf4000000 -#define SUN4_200_CLOCK_PHYSADDR 0xf3000000 -#define SUN4_200_BWTWO_PHYSADDR 0xfd000000 -#define SUN4_200_ETH_PHYSADDR 0xf6000000 -#define SUN4_200_SI_PHYSADDR 0xff200000 - -/* these were here before */ -#define SUN4_300_MEMREG_PHYSADDR 0xf4000000 -#define SUN4_300_CLOCK_PHYSADDR 0xf2000000 -#define SUN4_300_TIMER_PHYSADDR 0xef000000 -#define SUN4_300_ETH_PHYSADDR 0xf9000000 -#define SUN4_300_BWTWO_PHYSADDR 0xfb400000 -#define SUN4_300_DMA_PHYSADDR 0xfa001000 -#define SUN4_300_ESP_PHYSADDR 0xfa000000 - -/* Are these right? */ -#define SUN4_400_MEMREG_PHYSADDR 0xf4000000 -#define SUN4_400_CLOCK_PHYSADDR 0xf2000000 -#define SUN4_400_TIMER_PHYSADDR 0xef000000 -#define SUN4_400_ETH_PHYSADDR 0xf9000000 -#define SUN4_400_BWTWO_PHYSADDR 0xfb400000 -#define SUN4_400_DMA_PHYSADDR 0xfa001000 -#define SUN4_400_ESP_PHYSADDR 0xfa000000 - -/* - these are the actual values set and used in the code. Unused items set - to SUN_UNUSED_PHYSADDR - */ - -extern int sun4_memreg_physaddr; /* memory register (ecc?) */ -extern int sun4_clock_physaddr; /* system clock */ -extern int sun4_timer_physaddr; /* timer, where applicable */ -extern int sun4_eth_physaddr; /* onboard ethernet (ie/le) */ -extern int sun4_si_physaddr; /* sun3 scsi adapter */ -extern int sun4_bwtwo_physaddr; /* onboard bw2 */ -extern int sun4_dma_physaddr; /* scsi dma */ -extern int sun4_esp_physaddr; /* esp scsi */ -extern int sun4_ie_physaddr; /* interrupt enable */ - -#endif /* !(_SPARC_SUN4PADDR_H) */ diff --git a/include/asm-sparc/sun4prom.h b/include/asm-sparc/sun4prom.h deleted file mode 100644 index 9c8b4cbf629a..000000000000 --- a/include/asm-sparc/sun4prom.h +++ /dev/null @@ -1,83 +0,0 @@ -/* - * sun4prom.h -- interface to sun4 PROM monitor. We don't use most of this, - * so most of these are just placeholders. - */ - -#ifndef _SUN4PROM_H_ -#define _SUN4PROM_H_ - -/* - * Although this looks similar to an romvec for a OpenProm machine, it is - * actually closer to what was used in the Sun2 and Sun3. - * - * V2 entries exist only in version 2 PROMs and later, V3 in version 3 and later. - * - * Many of the function prototypes are guesses. Some are certainly wrong. - * Use with care. - */ - -typedef struct { - char *initSP; /* Initial system stack ptr */ - void (*startmon)(void); /* Initial PC for hardware */ - int *diagberr; /* Bus err handler for diags */ - struct linux_arguments_v0 **bootParam; /* Info for bootstrapped pgm */ - unsigned int *memorysize; /* Usable memory in bytes */ - unsigned char (*getchar)(void); /* Get char from input device */ - void (*putchar)(char); /* Put char to output device */ - int (*mayget)(void); /* Maybe get char, or -1 */ - int (*mayput)(int); /* Maybe put char, or -1 */ - unsigned char *echo; /* Should getchar echo? */ - unsigned char *insource; /* Input source selector */ - unsigned char *outsink; /* Output sink selector */ - int (*getkey)(void); /* Get next key if one exists */ - void (*initgetkey)(void); /* Initialize get key */ - unsigned int *translation; /* Kbd translation selector */ - unsigned char *keybid; /* Keyboard ID byte */ - int *screen_x; /* V2: Screen x pos (r/o) */ - int *screen_y; /* V2: Screen y pos (r/o) */ - struct keybuf *keybuf; /* Up/down keycode buffer */ - char *monid; /* Monitor version ID */ - void (*fbwritechar)(char); /* Write a character to FB */ - int *fbAddr; /* Address of frame buffer */ - char **font; /* Font table for FB */ - void (*fbwritestr)(char *); /* Write string to FB */ - void (*reboot)(char *); /* e.g. reboot("sd()vmlinux") */ - unsigned char *linebuf; /* The line input buffer */ - unsigned char **lineptr; /* Cur pointer into linebuf */ - int *linesize; /* length of line in linebuf */ - void (*getline)(char *); /* Get line from user */ - unsigned char (*getnextchar)(void); /* Get next char from linebuf */ - unsigned char (*peeknextchar)(void); /* Peek at next char */ - int *fbthere; /* =1 if frame buffer there */ - int (*getnum)(void); /* Grab hex num from line */ - int (*printf)(char *, ...); /* See prom_printf() instead */ - void (*printhex)(int); /* Format N digits in hex */ - unsigned char *leds; /* RAM copy of LED register */ - void (*setLEDs)(unsigned char *); /* Sets LED's and RAM copy */ - void (*NMIaddr)(void *); /* Addr for level 7 vector */ - void (*abortentry)(void); /* Entry for keyboard abort */ - int *nmiclock; /* Counts up in msec */ - int *FBtype; /* Frame buffer type */ - unsigned int romvecversion; /* Version number for this romvec */ - struct globram *globram; /* monitor global variables ??? */ - void * kbdaddr; /* Addr of keyboard in use */ - int *keyrinit; /* ms before kbd repeat */ - unsigned char *keyrtick; /* ms between repetitions */ - unsigned int *memoryavail; /* V1: Main mem usable size */ - long *resetaddr; /* where to jump on a reset */ - long *resetmap; /* pgmap entry for resetaddr */ - void (*exittomon)(void); /* Exit from user program */ - unsigned char **memorybitmap; /* V1: &{0 or &bits} */ - void (*setcxsegmap)(int ctxt, char *va, int pmeg); /* Set seg in any context */ - void (**vector_cmd)(void *); /* V2: Handler for 'v' cmd */ - unsigned long *expectedtrapsig; /* V3: Location of the expected trap signal */ - unsigned long *trapvectorbasetable; /* V3: Address of the trap vector table */ - int unused1; - int unused2; - int unused3; - int unused4; -} linux_sun4_romvec; - -extern linux_sun4_romvec *sun4_romvec; - -#endif /* _SUN4PROM_H_ */ diff --git a/include/asm-sparc/sunbpp.h b/include/asm-sparc/sunbpp.h deleted file mode 100644 index 92ee1a8ff3a2..000000000000 --- a/include/asm-sparc/sunbpp.h +++ /dev/null @@ -1,80 +0,0 @@ -/* - * include/asm-sparc/sunbpp.h - */ - -#ifndef _ASM_SPARC_SUNBPP_H -#define _ASM_SPARC_SUNBPP_H - -struct bpp_regs { - /* DMA registers */ - __volatile__ __u32 p_csr; /* DMA Control/Status Register */ - __volatile__ __u32 p_addr; /* Address Register */ - __volatile__ __u32 p_bcnt; /* Byte Count Register */ - __volatile__ __u32 p_tst_csr; /* Test Control/Status (DMA2 only) */ - /* Parallel Port registers */ - __volatile__ __u16 p_hcr; /* Hardware Configuration Register */ - __volatile__ __u16 p_ocr; /* Operation Configuration Register */ - __volatile__ __u8 p_dr; /* Parallel Data Register */ - __volatile__ __u8 p_tcr; /* Transfer Control Register */ - __volatile__ __u8 p_or; /* Output Register */ - __volatile__ __u8 p_ir; /* Input Register */ - __volatile__ __u16 p_icr; /* Interrupt Control Register */ -}; - -/* P_HCR. Time is in increments of SBus clock. */ -#define P_HCR_TEST 0x8000 /* Allows buried counters to be read */ -#define P_HCR_DSW 0x7f00 /* Data strobe width (in ticks) */ -#define P_HCR_DDS 0x007f /* Data setup before strobe (in ticks) */ - -/* P_OCR. */ -#define P_OCR_MEM_CLR 0x8000 -#define P_OCR_DATA_SRC 0x4000 /* ) */ -#define P_OCR_DS_DSEL 0x2000 /* ) Bidirectional */ -#define P_OCR_BUSY_DSEL 0x1000 /* ) selects */ -#define P_OCR_ACK_DSEL 0x0800 /* ) */ -#define P_OCR_EN_DIAG 0x0400 -#define P_OCR_BUSY_OP 0x0200 /* Busy operation */ -#define P_OCR_ACK_OP 0x0100 /* Ack operation */ -#define P_OCR_SRST 0x0080 /* Reset state machines. Not selfcleaning. */ -#define P_OCR_IDLE 0x0008 /* PP data transfer state machine is idle */ -#define P_OCR_V_ILCK 0x0002 /* Versatec faded. Zebra only. */ -#define P_OCR_EN_VER 0x0001 /* Enable Versatec (0 - enable). Zebra only. */ - -/* P_TCR */ -#define P_TCR_DIR 0x08 -#define P_TCR_BUSY 0x04 -#define P_TCR_ACK 0x02 -#define P_TCR_DS 0x01 /* Strobe */ - -/* P_OR */ -#define P_OR_V3 0x20 /* ) */ -#define P_OR_V2 0x10 /* ) on Zebra only */ -#define P_OR_V1 0x08 /* ) */ -#define P_OR_INIT 0x04 -#define P_OR_AFXN 0x02 /* Auto Feed */ -#define P_OR_SLCT_IN 0x01 - -/* P_IR */ -#define P_IR_PE 0x04 -#define P_IR_SLCT 0x02 -#define P_IR_ERR 0x01 - -/* P_ICR */ -#define P_DS_IRQ 0x8000 /* RW1 */ -#define P_ACK_IRQ 0x4000 /* RW1 */ -#define P_BUSY_IRQ 0x2000 /* RW1 */ -#define P_PE_IRQ 0x1000 /* RW1 */ -#define P_SLCT_IRQ 0x0800 /* RW1 */ -#define P_ERR_IRQ 0x0400 /* RW1 */ -#define P_DS_IRQ_EN 0x0200 /* RW Always on rising edge */ -#define P_ACK_IRQ_EN 0x0100 /* RW Always on rising edge */ -#define P_BUSY_IRP 0x0080 /* RW 1= rising edge */ -#define P_BUSY_IRQ_EN 0x0040 /* RW */ -#define P_PE_IRP 0x0020 /* RW 1= rising edge */ -#define P_PE_IRQ_EN 0x0010 /* RW */ -#define P_SLCT_IRP 0x0008 /* RW 1= rising edge */ -#define P_SLCT_IRQ_EN 0x0004 /* RW */ -#define P_ERR_IRP 0x0002 /* RW1 1= rising edge */ -#define P_ERR_IRQ_EN 0x0001 /* RW */ - -#endif /* !(_ASM_SPARC_SUNBPP_H) */ diff --git a/include/asm-sparc/swift.h b/include/asm-sparc/swift.h deleted file mode 100644 index e535061bf755..000000000000 --- a/include/asm-sparc/swift.h +++ /dev/null @@ -1,106 +0,0 @@ -/* swift.h: Specific definitions for the _broken_ Swift SRMMU - * MMU module. - * - * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu) - */ - -#ifndef _SPARC_SWIFT_H -#define _SPARC_SWIFT_H - -/* Swift is so brain damaged, here is the mmu control register. */ -#define SWIFT_ST 0x00800000 /* SW tablewalk enable */ -#define SWIFT_WP 0x00400000 /* Watchpoint enable */ - -/* Branch folding (buggy, disable on production systems!) */ -#define SWIFT_BF 0x00200000 -#define SWIFT_PMC 0x00180000 /* Page mode control */ -#define SWIFT_PE 0x00040000 /* Parity enable */ -#define SWIFT_PC 0x00020000 /* Parity control */ -#define SWIFT_AP 0x00010000 /* Graphics page mode control (TCX/SX) */ -#define SWIFT_AC 0x00008000 /* Alternate Cacheability (see viking.h) */ -#define SWIFT_BM 0x00004000 /* Boot mode */ -#define SWIFT_RC 0x00003c00 /* DRAM refresh control */ -#define SWIFT_IE 0x00000200 /* Instruction cache enable */ -#define SWIFT_DE 0x00000100 /* Data cache enable */ -#define SWIFT_SA 0x00000080 /* Store Allocate */ -#define SWIFT_NF 0x00000002 /* No fault mode */ -#define SWIFT_EN 0x00000001 /* MMU enable */ - -/* Bits [13:5] select one of 512 instruction cache tags */ -static inline void swift_inv_insn_tag(unsigned long addr) -{ - __asm__ __volatile__("sta %%g0, [%0] %1\n\t" - : /* no outputs */ - : "r" (addr), "i" (ASI_M_TXTC_TAG) - : "memory"); -} - -/* Bits [12:4] select one of 512 data cache tags */ -static inline void swift_inv_data_tag(unsigned long addr) -{ - __asm__ __volatile__("sta %%g0, [%0] %1\n\t" - : /* no outputs */ - : "r" (addr), "i" (ASI_M_DATAC_TAG) - : "memory"); -} - -static inline void swift_flush_dcache(void) -{ - unsigned long addr; - - for (addr = 0; addr < 0x2000; addr += 0x10) - swift_inv_data_tag(addr); -} - -static inline void swift_flush_icache(void) -{ - unsigned long addr; - - for (addr = 0; addr < 0x4000; addr += 0x20) - swift_inv_insn_tag(addr); -} - -static inline void swift_idflash_clear(void) -{ - unsigned long addr; - - for (addr = 0; addr < 0x2000; addr += 0x10) { - swift_inv_insn_tag(addr<<1); - swift_inv_data_tag(addr); - } -} - -/* Swift is so broken, it isn't even safe to use the following. */ -static inline void swift_flush_page(unsigned long page) -{ - __asm__ __volatile__("sta %%g0, [%0] %1\n\t" - : /* no outputs */ - : "r" (page), "i" (ASI_M_FLUSH_PAGE) - : "memory"); -} - -static inline void swift_flush_segment(unsigned long addr) -{ - __asm__ __volatile__("sta %%g0, [%0] %1\n\t" - : /* no outputs */ - : "r" (addr), "i" (ASI_M_FLUSH_SEG) - : "memory"); -} - -static inline void swift_flush_region(unsigned long addr) -{ - __asm__ __volatile__("sta %%g0, [%0] %1\n\t" - : /* no outputs */ - : "r" (addr), "i" (ASI_M_FLUSH_REGION) - : "memory"); -} - -static inline void swift_flush_context(void) -{ - __asm__ __volatile__("sta %%g0, [%%g0] %0\n\t" - : /* no outputs */ - : "i" (ASI_M_FLUSH_CTX) - : "memory"); -} - -#endif /* !(_SPARC_SWIFT_H) */ diff --git a/include/asm-sparc/sysen.h b/include/asm-sparc/sysen.h deleted file mode 100644 index 6af34abde6e7..000000000000 --- a/include/asm-sparc/sysen.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * sysen.h: Bit fields within the "System Enable" register accessed via - * the ASI_CONTROL address space at address AC_SYSENABLE. - * - * Copyright (C) 1994 David S. Miller (davem@caip.rutgers.edu) - */ - -#ifndef _SPARC_SYSEN_H -#define _SPARC_SYSEN_H - -#define SENABLE_DVMA 0x20 /* enable dvma transfers */ -#define SENABLE_CACHE 0x10 /* enable VAC cache */ -#define SENABLE_RESET 0x04 /* reset whole machine, danger Will Robinson */ - -#endif /* _SPARC_SYSEN_H */ diff --git a/include/asm-sparc/system.h b/include/asm-sparc/system.h deleted file mode 100644 index b4b024445fc9..000000000000 --- a/include/asm-sparc/system.h +++ /dev/null @@ -1,288 +0,0 @@ -#ifndef __SPARC_SYSTEM_H -#define __SPARC_SYSTEM_H - -#include <linux/kernel.h> -#include <linux/threads.h> /* NR_CPUS */ -#include <linux/thread_info.h> - -#include <asm/page.h> -#include <asm/psr.h> -#include <asm/ptrace.h> -#include <asm/btfixup.h> -#include <asm/smp.h> - -#ifndef __ASSEMBLY__ - -#include <linux/irqflags.h> - -/* - * Sparc (general) CPU types - */ -enum sparc_cpu { - sun4 = 0x00, - sun4c = 0x01, - sun4m = 0x02, - sun4d = 0x03, - sun4e = 0x04, - sun4u = 0x05, /* V8 ploos ploos */ - sun_unknown = 0x06, - ap1000 = 0x07, /* almost a sun4m */ -}; - -/* Really, userland should not be looking at any of this... */ -#ifdef __KERNEL__ - -extern enum sparc_cpu sparc_cpu_model; - -#ifndef CONFIG_SUN4 -#define ARCH_SUN4C_SUN4 (sparc_cpu_model==sun4c) -#define ARCH_SUN4 0 -#else -#define ARCH_SUN4C_SUN4 1 -#define ARCH_SUN4 1 -#endif - -#define SUN4M_NCPUS 4 /* Architectural limit of sun4m. */ - -extern char reboot_command[]; - -extern struct thread_info *current_set[NR_CPUS]; - -extern unsigned long empty_bad_page; -extern unsigned long empty_bad_page_table; -extern unsigned long empty_zero_page; - -extern void sun_do_break(void); -extern int serial_console; -extern int stop_a_enabled; - -static inline int con_is_present(void) -{ - return serial_console ? 0 : 1; -} - -/* When a context switch happens we must flush all user windows so that - * the windows of the current process are flushed onto its stack. This - * way the windows are all clean for the next process and the stack - * frames are up to date. - */ -extern void flush_user_windows(void); -extern void kill_user_windows(void); -extern void synchronize_user_stack(void); -extern void fpsave(unsigned long *fpregs, unsigned long *fsr, - void *fpqueue, unsigned long *fpqdepth); - -#ifdef CONFIG_SMP -#define SWITCH_ENTER(prv) \ - do { \ - if (test_tsk_thread_flag(prv, TIF_USEDFPU)) { \ - put_psr(get_psr() | PSR_EF); \ - fpsave(&(prv)->thread.float_regs[0], &(prv)->thread.fsr, \ - &(prv)->thread.fpqueue[0], &(prv)->thread.fpqdepth); \ - clear_tsk_thread_flag(prv, TIF_USEDFPU); \ - (prv)->thread.kregs->psr &= ~PSR_EF; \ - } \ - } while(0) - -#define SWITCH_DO_LAZY_FPU(next) /* */ -#else -#define SWITCH_ENTER(prv) /* */ -#define SWITCH_DO_LAZY_FPU(nxt) \ - do { \ - if (last_task_used_math != (nxt)) \ - (nxt)->thread.kregs->psr&=~PSR_EF; \ - } while(0) -#endif - -extern void flushw_all(void); - -/* - * Flush windows so that the VM switch which follows - * would not pull the stack from under us. - * - * SWITCH_ENTER and SWITH_DO_LAZY_FPU do not work yet (e.g. SMP does not work) - * XXX WTF is the above comment? Found in late teen 2.4.x. - */ -#define prepare_arch_switch(next) do { \ - __asm__ __volatile__( \ - ".globl\tflush_patch_switch\nflush_patch_switch:\n\t" \ - "save %sp, -0x40, %sp; save %sp, -0x40, %sp; save %sp, -0x40, %sp\n\t" \ - "save %sp, -0x40, %sp; save %sp, -0x40, %sp; save %sp, -0x40, %sp\n\t" \ - "save %sp, -0x40, %sp\n\t" \ - "restore; restore; restore; restore; restore; restore; restore"); \ -} while(0) - - /* Much care has gone into this code, do not touch it. - * - * We need to loadup regs l0/l1 for the newly forked child - * case because the trap return path relies on those registers - * holding certain values, gcc is told that they are clobbered. - * Gcc needs registers for 3 values in and 1 value out, so we - * clobber every non-fixed-usage register besides l2/l3/o4/o5. -DaveM - * - * Hey Dave, that do not touch sign is too much of an incentive - * - Anton & Pete - */ -#define switch_to(prev, next, last) do { \ - SWITCH_ENTER(prev); \ - SWITCH_DO_LAZY_FPU(next); \ - cpu_set(smp_processor_id(), next->active_mm->cpu_vm_mask); \ - __asm__ __volatile__( \ - "sethi %%hi(here - 0x8), %%o7\n\t" \ - "mov %%g6, %%g3\n\t" \ - "or %%o7, %%lo(here - 0x8), %%o7\n\t" \ - "rd %%psr, %%g4\n\t" \ - "std %%sp, [%%g6 + %4]\n\t" \ - "rd %%wim, %%g5\n\t" \ - "wr %%g4, 0x20, %%psr\n\t" \ - "nop\n\t" \ - "std %%g4, [%%g6 + %3]\n\t" \ - "ldd [%2 + %3], %%g4\n\t" \ - "mov %2, %%g6\n\t" \ - ".globl patchme_store_new_current\n" \ -"patchme_store_new_current:\n\t" \ - "st %2, [%1]\n\t" \ - "wr %%g4, 0x20, %%psr\n\t" \ - "nop\n\t" \ - "nop\n\t" \ - "nop\n\t" /* LEON needs all 3 nops: load to %sp depends on CWP. */ \ - "ldd [%%g6 + %4], %%sp\n\t" \ - "wr %%g5, 0x0, %%wim\n\t" \ - "ldd [%%sp + 0x00], %%l0\n\t" \ - "ldd [%%sp + 0x38], %%i6\n\t" \ - "wr %%g4, 0x0, %%psr\n\t" \ - "nop\n\t" \ - "nop\n\t" \ - "jmpl %%o7 + 0x8, %%g0\n\t" \ - " ld [%%g3 + %5], %0\n\t" \ - "here:\n" \ - : "=&r" (last) \ - : "r" (&(current_set[hard_smp_processor_id()])), \ - "r" (task_thread_info(next)), \ - "i" (TI_KPSR), \ - "i" (TI_KSP), \ - "i" (TI_TASK) \ - : "g1", "g2", "g3", "g4", "g5", "g7", \ - "l0", "l1", "l3", "l4", "l5", "l6", "l7", \ - "i0", "i1", "i2", "i3", "i4", "i5", \ - "o0", "o1", "o2", "o3", "o7"); \ - } while(0) - -/* XXX Change this if we ever use a PSO mode kernel. */ -#define mb() __asm__ __volatile__ ("" : : : "memory") -#define rmb() mb() -#define wmb() mb() -#define read_barrier_depends() do { } while(0) -#define set_mb(__var, __value) do { __var = __value; mb(); } while(0) -#define smp_mb() __asm__ __volatile__("":::"memory") -#define smp_rmb() __asm__ __volatile__("":::"memory") -#define smp_wmb() __asm__ __volatile__("":::"memory") -#define smp_read_barrier_depends() do { } while(0) - -#define nop() __asm__ __volatile__ ("nop") - -/* This has special calling conventions */ -#ifndef CONFIG_SMP -BTFIXUPDEF_CALL(void, ___xchg32, void) -#endif - -static inline unsigned long xchg_u32(__volatile__ unsigned long *m, unsigned long val) -{ -#ifdef CONFIG_SMP - __asm__ __volatile__("swap [%2], %0" - : "=&r" (val) - : "0" (val), "r" (m) - : "memory"); - return val; -#else - register unsigned long *ptr asm("g1"); - register unsigned long ret asm("g2"); - - ptr = (unsigned long *) m; - ret = val; - - /* Note: this is magic and the nop there is - really needed. */ - __asm__ __volatile__( - "mov %%o7, %%g4\n\t" - "call ___f____xchg32\n\t" - " nop\n\t" - : "=&r" (ret) - : "0" (ret), "r" (ptr) - : "g3", "g4", "g7", "memory", "cc"); - - return ret; -#endif -} - -#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) - -extern void __xchg_called_with_bad_pointer(void); - -static inline unsigned long __xchg(unsigned long x, __volatile__ void * ptr, int size) -{ - switch (size) { - case 4: - return xchg_u32(ptr, x); - }; - __xchg_called_with_bad_pointer(); - return x; -} - -/* Emulate cmpxchg() the same way we emulate atomics, - * by hashing the object address and indexing into an array - * of spinlocks to get a bit of performance... - * - * See arch/sparc/lib/atomic32.c for implementation. - * - * Cribbed from <asm-parisc/atomic.h> - */ -#define __HAVE_ARCH_CMPXCHG 1 - -/* bug catcher for when unsupported size is used - won't link */ -extern void __cmpxchg_called_with_bad_pointer(void); -/* we only need to support cmpxchg of a u32 on sparc */ -extern unsigned long __cmpxchg_u32(volatile u32 *m, u32 old, u32 new_); - -/* don't worry...optimizer will get rid of most of this */ -static inline unsigned long -__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new_, int size) -{ - switch (size) { - case 4: - return __cmpxchg_u32((u32 *)ptr, (u32)old, (u32)new_); - default: - __cmpxchg_called_with_bad_pointer(); - break; - } - return old; -} - -#define cmpxchg(ptr, o, n) \ -({ \ - __typeof__(*(ptr)) _o_ = (o); \ - __typeof__(*(ptr)) _n_ = (n); \ - (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_, \ - (unsigned long)_n_, sizeof(*(ptr))); \ -}) - -#include <asm-generic/cmpxchg-local.h> - -/* - * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make - * them available. - */ -#define cmpxchg_local(ptr, o, n) \ - ((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\ - (unsigned long)(n), sizeof(*(ptr)))) -#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) - -extern void die_if_kernel(char *str, struct pt_regs *regs) __attribute__ ((noreturn)); - -#endif /* __KERNEL__ */ - -#endif /* __ASSEMBLY__ */ - -#define arch_align_stack(x) (x) - -#endif /* !(__SPARC_SYSTEM_H) */ diff --git a/include/asm-sparc/termbits.h b/include/asm-sparc/termbits.h deleted file mode 100644 index 90cf2210118b..000000000000 --- a/include/asm-sparc/termbits.h +++ /dev/null @@ -1,261 +0,0 @@ -#ifndef _SPARC_TERMBITS_H -#define _SPARC_TERMBITS_H - -#include <linux/posix_types.h> - -typedef unsigned char cc_t; -typedef unsigned int speed_t; -typedef unsigned long tcflag_t; - -#define NCC 8 -struct termio { - unsigned short c_iflag; /* input mode flags */ - unsigned short c_oflag; /* output mode flags */ - unsigned short c_cflag; /* control mode flags */ - unsigned short c_lflag; /* local mode flags */ - unsigned char c_line; /* line discipline */ - unsigned char c_cc[NCC]; /* control characters */ -}; - -#define NCCS 17 -struct termios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ -#ifdef __KERNEL__ -#define SIZEOF_USER_TERMIOS sizeof (struct termios) - (2*sizeof (cc_t)) - cc_t _x_cc[2]; /* We need them to hold vmin/vtime */ -#endif -}; - -struct termios2 { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - cc_t _x_cc[2]; /* padding to match ktermios */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -struct ktermios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - cc_t _x_cc[2]; /* We need them to hold vmin/vtime */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -/* c_cc characters */ -#define VINTR 0 -#define VQUIT 1 -#define VERASE 2 -#define VKILL 3 -#define VEOF 4 -#define VEOL 5 -#define VEOL2 6 -#define VSWTC 7 -#define VSTART 8 -#define VSTOP 9 - - - -#define VSUSP 10 -#define VDSUSP 11 /* SunOS POSIX nicety I do believe... */ -#define VREPRINT 12 -#define VDISCARD 13 -#define VWERASE 14 -#define VLNEXT 15 - -/* Kernel keeps vmin/vtime separated, user apps assume vmin/vtime is - * shared with eof/eol - */ -#ifdef __KERNEL__ -#define VMIN 16 -#define VTIME 17 -#else -#define VMIN VEOF -#define VTIME VEOL -#endif - -/* c_iflag bits */ -#define IGNBRK 0x00000001 -#define BRKINT 0x00000002 -#define IGNPAR 0x00000004 -#define PARMRK 0x00000008 -#define INPCK 0x00000010 -#define ISTRIP 0x00000020 -#define INLCR 0x00000040 -#define IGNCR 0x00000080 -#define ICRNL 0x00000100 -#define IUCLC 0x00000200 -#define IXON 0x00000400 -#define IXANY 0x00000800 -#define IXOFF 0x00001000 -#define IMAXBEL 0x00002000 -#define IUTF8 0x00004000 - -/* c_oflag bits */ -#define OPOST 0x00000001 -#define OLCUC 0x00000002 -#define ONLCR 0x00000004 -#define OCRNL 0x00000008 -#define ONOCR 0x00000010 -#define ONLRET 0x00000020 -#define OFILL 0x00000040 -#define OFDEL 0x00000080 -#define NLDLY 0x00000100 -#define NL0 0x00000000 -#define NL1 0x00000100 -#define CRDLY 0x00000600 -#define CR0 0x00000000 -#define CR1 0x00000200 -#define CR2 0x00000400 -#define CR3 0x00000600 -#define TABDLY 0x00001800 -#define TAB0 0x00000000 -#define TAB1 0x00000800 -#define TAB2 0x00001000 -#define TAB3 0x00001800 -#define XTABS 0x00001800 -#define BSDLY 0x00002000 -#define BS0 0x00000000 -#define BS1 0x00002000 -#define VTDLY 0x00004000 -#define VT0 0x00000000 -#define VT1 0x00004000 -#define FFDLY 0x00008000 -#define FF0 0x00000000 -#define FF1 0x00008000 -#define PAGEOUT 0x00010000 /* SUNOS specific */ -#define WRAP 0x00020000 /* SUNOS specific */ - -/* c_cflag bit meaning */ -#define CBAUD 0x0000100f -#define B0 0x00000000 /* hang up */ -#define B50 0x00000001 -#define B75 0x00000002 -#define B110 0x00000003 -#define B134 0x00000004 -#define B150 0x00000005 -#define B200 0x00000006 -#define B300 0x00000007 -#define B600 0x00000008 -#define B1200 0x00000009 -#define B1800 0x0000000a -#define B2400 0x0000000b -#define B4800 0x0000000c -#define B9600 0x0000000d -#define B19200 0x0000000e -#define B38400 0x0000000f -#define EXTA B19200 -#define EXTB B38400 -#define CSIZE 0x00000030 -#define CS5 0x00000000 -#define CS6 0x00000010 -#define CS7 0x00000020 -#define CS8 0x00000030 -#define CSTOPB 0x00000040 -#define CREAD 0x00000080 -#define PARENB 0x00000100 -#define PARODD 0x00000200 -#define HUPCL 0x00000400 -#define CLOCAL 0x00000800 -#define CBAUDEX 0x00001000 -/* We'll never see these speeds with the Zilogs, but for completeness... */ -#define BOTHER 0x00001000 -#define B57600 0x00001001 -#define B115200 0x00001002 -#define B230400 0x00001003 -#define B460800 0x00001004 -/* This is what we can do with the Zilogs. */ -#define B76800 0x00001005 -/* This is what we can do with the SAB82532. */ -#define B153600 0x00001006 -#define B307200 0x00001007 -#define B614400 0x00001008 -#define B921600 0x00001009 -/* And these are the rest... */ -#define B500000 0x0000100a -#define B576000 0x0000100b -#define B1000000 0x0000100c -#define B1152000 0x0000100d -#define B1500000 0x0000100e -#define B2000000 0x0000100f -/* These have totally bogus values and nobody uses them - so far. Later on we'd have to use say 0x10000x and - adjust CBAUD constant and drivers accordingly. -#define B2500000 0x00001010 -#define B3000000 0x00001011 -#define B3500000 0x00001012 -#define B4000000 0x00001013 */ -#define CIBAUD 0x100f0000 /* input baud rate (not used) */ -#define CMSPAR 0x40000000 /* mark or space (stick) parity */ -#define CRTSCTS 0x80000000 /* flow control */ - -#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ - -/* c_lflag bits */ -#define ISIG 0x00000001 -#define ICANON 0x00000002 -#define XCASE 0x00000004 -#define ECHO 0x00000008 -#define ECHOE 0x00000010 -#define ECHOK 0x00000020 -#define ECHONL 0x00000040 -#define NOFLSH 0x00000080 -#define TOSTOP 0x00000100 -#define ECHOCTL 0x00000200 -#define ECHOPRT 0x00000400 -#define ECHOKE 0x00000800 -#define DEFECHO 0x00001000 /* SUNOS thing, what is it? */ -#define FLUSHO 0x00002000 -#define PENDIN 0x00004000 -#define IEXTEN 0x00008000 - -/* modem lines */ -#define TIOCM_LE 0x001 -#define TIOCM_DTR 0x002 -#define TIOCM_RTS 0x004 -#define TIOCM_ST 0x008 -#define TIOCM_SR 0x010 -#define TIOCM_CTS 0x020 -#define TIOCM_CAR 0x040 -#define TIOCM_RNG 0x080 -#define TIOCM_DSR 0x100 -#define TIOCM_CD TIOCM_CAR -#define TIOCM_RI TIOCM_RNG -#define TIOCM_OUT1 0x2000 -#define TIOCM_OUT2 0x4000 -#define TIOCM_LOOP 0x8000 - -/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ -#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ - - -/* tcflow() and TCXONC use these */ -#define TCOOFF 0 -#define TCOON 1 -#define TCIOFF 2 -#define TCION 3 - -/* tcflush() and TCFLSH use these */ -#define TCIFLUSH 0 -#define TCOFLUSH 1 -#define TCIOFLUSH 2 - -/* tcsetattr uses these */ -#define TCSANOW 0 -#define TCSADRAIN 1 -#define TCSAFLUSH 2 - -#endif /* !(_SPARC_TERMBITS_H) */ diff --git a/include/asm-sparc/termios.h b/include/asm-sparc/termios.h deleted file mode 100644 index f7b4409c35ff..000000000000 --- a/include/asm-sparc/termios.h +++ /dev/null @@ -1,183 +0,0 @@ -#ifndef _SPARC_TERMIOS_H -#define _SPARC_TERMIOS_H - -#include <asm/ioctls.h> -#include <asm/termbits.h> - -#if defined(__KERNEL__) || defined(__DEFINE_BSD_TERMIOS) -struct sgttyb { - char sg_ispeed; - char sg_ospeed; - char sg_erase; - char sg_kill; - short sg_flags; -}; - -struct tchars { - char t_intrc; - char t_quitc; - char t_startc; - char t_stopc; - char t_eofc; - char t_brkc; -}; - -struct ltchars { - char t_suspc; - char t_dsuspc; - char t_rprntc; - char t_flushc; - char t_werasc; - char t_lnextc; -}; -#endif /* __KERNEL__ */ - -struct winsize { - unsigned short ws_row; - unsigned short ws_col; - unsigned short ws_xpixel; - unsigned short ws_ypixel; -}; - -#ifdef __KERNEL__ -#include <linux/module.h> - -/* - * c_cc characters in the termio structure. Oh, how I love being - * backwardly compatible. Notice that character 4 and 5 are - * interpreted differently depending on whether ICANON is set in - * c_lflag. If it's set, they are used as _VEOF and _VEOL, otherwise - * as _VMIN and V_TIME. This is for compatibility with OSF/1 (which - * is compatible with sysV)... - */ -#define _VMIN 4 -#define _VTIME 5 - - -/* intr=^C quit=^\ erase=del kill=^U - eof=^D eol=\0 eol2=\0 sxtc=\0 - start=^Q stop=^S susp=^Z dsusp=^Y - reprint=^R discard=^U werase=^W lnext=^V - vmin=\1 vtime=\0 -*/ -#define INIT_C_CC "\003\034\177\025\004\000\000\000\021\023\032\031\022\025\027\026\001" - -/* - * Translate a "termio" structure into a "termios". Ugh. - */ -#define user_termio_to_kernel_termios(termios, termio) \ -({ \ - unsigned short tmp; \ - get_user(tmp, &(termio)->c_iflag); \ - (termios)->c_iflag = (0xffff0000 & ((termios)->c_iflag)) | tmp; \ - get_user(tmp, &(termio)->c_oflag); \ - (termios)->c_oflag = (0xffff0000 & ((termios)->c_oflag)) | tmp; \ - get_user(tmp, &(termio)->c_cflag); \ - (termios)->c_cflag = (0xffff0000 & ((termios)->c_cflag)) | tmp; \ - get_user(tmp, &(termio)->c_lflag); \ - (termios)->c_lflag = (0xffff0000 & ((termios)->c_lflag)) | tmp; \ - copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \ - 0; \ -}) - -/* - * Translate a "termios" structure into a "termio". Ugh. - * - * Note the "fun" _VMIN overloading. - */ -#define kernel_termios_to_user_termio(termio, termios) \ -({ \ - put_user((termios)->c_iflag, &(termio)->c_iflag); \ - put_user((termios)->c_oflag, &(termio)->c_oflag); \ - put_user((termios)->c_cflag, &(termio)->c_cflag); \ - put_user((termios)->c_lflag, &(termio)->c_lflag); \ - put_user((termios)->c_line, &(termio)->c_line); \ - copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ - if (!((termios)->c_lflag & ICANON)) { \ - put_user((termios)->c_cc[VMIN], &(termio)->c_cc[_VMIN]); \ - put_user((termios)->c_cc[VTIME], &(termio)->c_cc[_VTIME]); \ - } \ - 0; \ -}) - -#define user_termios_to_kernel_termios(k, u) \ -({ \ - int err; \ - err = get_user((k)->c_iflag, &(u)->c_iflag); \ - err |= get_user((k)->c_oflag, &(u)->c_oflag); \ - err |= get_user((k)->c_cflag, &(u)->c_cflag); \ - err |= get_user((k)->c_lflag, &(u)->c_lflag); \ - err |= get_user((k)->c_line, &(u)->c_line); \ - err |= copy_from_user((k)->c_cc, (u)->c_cc, NCCS); \ - if ((k)->c_lflag & ICANON) { \ - err |= get_user((k)->c_cc[VEOF], &(u)->c_cc[VEOF]); \ - err |= get_user((k)->c_cc[VEOL], &(u)->c_cc[VEOL]); \ - } else { \ - err |= get_user((k)->c_cc[VMIN], &(u)->c_cc[_VMIN]); \ - err |= get_user((k)->c_cc[VTIME], &(u)->c_cc[_VTIME]); \ - } \ - err |= get_user((k)->c_ispeed, &(u)->c_ispeed); \ - err |= get_user((k)->c_ospeed, &(u)->c_ospeed); \ - err; \ -}) - -#define kernel_termios_to_user_termios(u, k) \ -({ \ - int err; \ - err = put_user((k)->c_iflag, &(u)->c_iflag); \ - err |= put_user((k)->c_oflag, &(u)->c_oflag); \ - err |= put_user((k)->c_cflag, &(u)->c_cflag); \ - err |= put_user((k)->c_lflag, &(u)->c_lflag); \ - err |= put_user((k)->c_line, &(u)->c_line); \ - err |= copy_to_user((u)->c_cc, (k)->c_cc, NCCS); \ - if (!((k)->c_lflag & ICANON)) { \ - err |= put_user((k)->c_cc[VMIN], &(u)->c_cc[_VMIN]); \ - err |= put_user((k)->c_cc[VTIME], &(u)->c_cc[_VTIME]); \ - } else { \ - err |= put_user((k)->c_cc[VEOF], &(u)->c_cc[VEOF]); \ - err |= put_user((k)->c_cc[VEOL], &(u)->c_cc[VEOL]); \ - } \ - err |= put_user((k)->c_ispeed, &(u)->c_ispeed); \ - err |= put_user((k)->c_ospeed, &(u)->c_ospeed); \ - err; \ -}) - -#define user_termios_to_kernel_termios_1(k, u) \ -({ \ - get_user((k)->c_iflag, &(u)->c_iflag); \ - get_user((k)->c_oflag, &(u)->c_oflag); \ - get_user((k)->c_cflag, &(u)->c_cflag); \ - get_user((k)->c_lflag, &(u)->c_lflag); \ - get_user((k)->c_line, &(u)->c_line); \ - copy_from_user((k)->c_cc, (u)->c_cc, NCCS); \ - if ((k)->c_lflag & ICANON) { \ - get_user((k)->c_cc[VEOF], &(u)->c_cc[VEOF]); \ - get_user((k)->c_cc[VEOL], &(u)->c_cc[VEOL]); \ - } else { \ - get_user((k)->c_cc[VMIN], &(u)->c_cc[_VMIN]); \ - get_user((k)->c_cc[VTIME], &(u)->c_cc[_VTIME]); \ - } \ - 0; \ -}) - -#define kernel_termios_to_user_termios_1(u, k) \ -({ \ - put_user((k)->c_iflag, &(u)->c_iflag); \ - put_user((k)->c_oflag, &(u)->c_oflag); \ - put_user((k)->c_cflag, &(u)->c_cflag); \ - put_user((k)->c_lflag, &(u)->c_lflag); \ - put_user((k)->c_line, &(u)->c_line); \ - copy_to_user((u)->c_cc, (k)->c_cc, NCCS); \ - if (!((k)->c_lflag & ICANON)) { \ - put_user((k)->c_cc[VMIN], &(u)->c_cc[_VMIN]); \ - put_user((k)->c_cc[VTIME], &(u)->c_cc[_VTIME]); \ - } else { \ - put_user((k)->c_cc[VEOF], &(u)->c_cc[VEOF]); \ - put_user((k)->c_cc[VEOL], &(u)->c_cc[VEOL]); \ - } \ - 0; \ -}) - -#endif /* __KERNEL__ */ - -#endif /* _SPARC_TERMIOS_H */ diff --git a/include/asm-sparc/thread_info.h b/include/asm-sparc/thread_info.h deleted file mode 100644 index 91b9f5888c85..000000000000 --- a/include/asm-sparc/thread_info.h +++ /dev/null @@ -1,151 +0,0 @@ -/* - * thread_info.h: sparc low-level thread information - * adapted from the ppc version by Pete Zaitcev, which was - * adapted from the i386 version by Paul Mackerras - * - * Copyright (C) 2002 David Howells (dhowells@redhat.com) - * Copyright (c) 2002 Pete Zaitcev (zaitcev@yahoo.com) - * - Incorporating suggestions made by Linus Torvalds and Dave Miller - */ - -#ifndef _ASM_THREAD_INFO_H -#define _ASM_THREAD_INFO_H - -#ifdef __KERNEL__ - -#ifndef __ASSEMBLY__ - -#include <asm/btfixup.h> -#include <asm/ptrace.h> -#include <asm/page.h> - -/* - * Low level task data. - * - * If you change this, change the TI_* offsets below to match. - */ -#define NSWINS 8 -struct thread_info { - unsigned long uwinmask; - struct task_struct *task; /* main task structure */ - struct exec_domain *exec_domain; /* execution domain */ - unsigned long flags; /* low level flags */ - int cpu; /* cpu we're on */ - int preempt_count; /* 0 => preemptable, - <0 => BUG */ - int softirq_count; - int hardirq_count; - - /* Context switch saved kernel state. */ - unsigned long ksp; /* ... ksp __attribute__ ((aligned (8))); */ - unsigned long kpc; - unsigned long kpsr; - unsigned long kwim; - - /* A place to store user windows and stack pointers - * when the stack needs inspection. - */ - struct reg_window reg_window[NSWINS]; /* align for ldd! */ - unsigned long rwbuf_stkptrs[NSWINS]; - unsigned long w_saved; - - struct restart_block restart_block; -}; - -/* - * macros/functions for gaining access to the thread information structure - * - * preempt_count needs to be 1 initially, until the scheduler is functional. - */ -#define INIT_THREAD_INFO(tsk) \ -{ \ - .uwinmask = 0, \ - .task = &tsk, \ - .exec_domain = &default_exec_domain, \ - .flags = 0, \ - .cpu = 0, \ - .preempt_count = 1, \ - .restart_block = { \ - .fn = do_no_restart_syscall, \ - }, \ -} - -#define init_thread_info (init_thread_union.thread_info) -#define init_stack (init_thread_union.stack) - -/* how to get the thread information struct from C */ -register struct thread_info *current_thread_info_reg asm("g6"); -#define current_thread_info() (current_thread_info_reg) - -/* - * thread information allocation - */ -#if PAGE_SHIFT == 13 -#define THREAD_INFO_ORDER 0 -#else /* PAGE_SHIFT */ -#define THREAD_INFO_ORDER 1 -#endif - -BTFIXUPDEF_CALL(struct thread_info *, alloc_thread_info, void) -#define alloc_thread_info(tsk) BTFIXUP_CALL(alloc_thread_info)() - -BTFIXUPDEF_CALL(void, free_thread_info, struct thread_info *) -#define free_thread_info(ti) BTFIXUP_CALL(free_thread_info)(ti) - -#endif /* __ASSEMBLY__ */ - -/* - * Size of kernel stack for each process. - * Observe the order of get_free_pages() in alloc_thread_info(). - * The sun4 has 8K stack too, because it's short on memory, and 16K is a waste. - */ -#define THREAD_SIZE 8192 - -/* - * Offsets in thread_info structure, used in assembly code - * The "#define REGWIN_SZ 0x40" was abolished, so no multiplications. - */ -#define TI_UWINMASK 0x00 /* uwinmask */ -#define TI_TASK 0x04 -#define TI_EXECDOMAIN 0x08 /* exec_domain */ -#define TI_FLAGS 0x0c -#define TI_CPU 0x10 -#define TI_PREEMPT 0x14 /* preempt_count */ -#define TI_SOFTIRQ 0x18 /* softirq_count */ -#define TI_HARDIRQ 0x1c /* hardirq_count */ -#define TI_KSP 0x20 /* ksp */ -#define TI_KPC 0x24 /* kpc (ldd'ed with kpc) */ -#define TI_KPSR 0x28 /* kpsr */ -#define TI_KWIM 0x2c /* kwim (ldd'ed with kpsr) */ -#define TI_REG_WINDOW 0x30 -#define TI_RWIN_SPTRS 0x230 -#define TI_W_SAVED 0x250 -/* #define TI_RESTART_BLOCK 0x25n */ /* Nobody cares */ - -#define PREEMPT_ACTIVE 0x4000000 - -/* - * thread information flag bit numbers - */ -#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ -/* flag bit 1 is available */ -#define TIF_SIGPENDING 2 /* signal pending */ -#define TIF_NEED_RESCHED 3 /* rescheduling necessary */ -#define TIF_RESTORE_SIGMASK 4 /* restore signal mask in do_signal() */ -#define TIF_USEDFPU 8 /* FPU was used by this task - * this quantum (SMP) */ -#define TIF_POLLING_NRFLAG 9 /* true if poll_idle() is polling - * TIF_NEED_RESCHED */ -#define TIF_MEMDIE 10 - -/* as above, but as bit values */ -#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE) -#define _TIF_SIGPENDING (1<<TIF_SIGPENDING) -#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED) -#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK) -#define _TIF_USEDFPU (1<<TIF_USEDFPU) -#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG) - -#endif /* __KERNEL__ */ - -#endif /* _ASM_THREAD_INFO_H */ diff --git a/include/asm-sparc/timer.h b/include/asm-sparc/timer.h deleted file mode 100644 index d909565f9410..000000000000 --- a/include/asm-sparc/timer.h +++ /dev/null @@ -1,109 +0,0 @@ -/* - * timer.h: Definitions for the timer chips on the Sparc. - * - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - */ - - -#ifndef _SPARC_TIMER_H -#define _SPARC_TIMER_H - -#include <asm/system.h> /* For SUN4M_NCPUS */ -#include <asm/sun4paddr.h> -#include <asm/btfixup.h> - -/* Timer structures. The interrupt timer has two properties which - * are the counter (which is handled in do_timer in sched.c) and the limit. - * This limit is where the timer's counter 'wraps' around. Oddly enough, - * the sun4c timer when it hits the limit wraps back to 1 and not zero - * thus when calculating the value at which it will fire a microsecond you - * must adjust by one. Thanks SUN for designing such great hardware ;( - */ - -/* Note that I am only going to use the timer that interrupts at - * Sparc IRQ 10. There is another one available that can fire at - * IRQ 14. Currently it is left untouched, we keep the PROM's limit - * register value and let the prom take these interrupts. This allows - * L1-A to work. - */ - -struct sun4c_timer_info { - __volatile__ unsigned int cur_count10; - __volatile__ unsigned int timer_limit10; - __volatile__ unsigned int cur_count14; - __volatile__ unsigned int timer_limit14; -}; - -#define SUN4C_TIMER_PHYSADDR 0xf3000000 -#ifdef CONFIG_SUN4 -#define SUN_TIMER_PHYSADDR SUN4_300_TIMER_PHYSADDR -#else -#define SUN_TIMER_PHYSADDR SUN4C_TIMER_PHYSADDR -#endif - -/* A sun4m has two blocks of registers which are probably of the same - * structure. LSI Logic's L64851 is told to _decrement_ from the limit - * value. Aurora behaves similarly but its limit value is compacted in - * other fashion (it's wider). Documented fields are defined here. - */ - -/* As with the interrupt register, we have two classes of timer registers - * which are per-cpu and master. Per-cpu timers only hit that cpu and are - * only level 14 ticks, master timer hits all cpus and is level 10. - */ - -#define SUN4M_PRM_CNT_L 0x80000000 -#define SUN4M_PRM_CNT_LVALUE 0x7FFFFC00 - -struct sun4m_timer_percpu_info { - __volatile__ unsigned int l14_timer_limit; /* Initial value is 0x009c4000 */ - __volatile__ unsigned int l14_cur_count; - - /* This register appears to be write only and/or inaccessible - * on Uni-Processor sun4m machines. - */ - __volatile__ unsigned int l14_limit_noclear; /* Data access error is here */ - - __volatile__ unsigned int cntrl; /* =1 after POST on Aurora */ - __volatile__ unsigned char space[PAGE_SIZE - 16]; -}; - -struct sun4m_timer_regs { - struct sun4m_timer_percpu_info cpu_timers[SUN4M_NCPUS]; - volatile unsigned int l10_timer_limit; - volatile unsigned int l10_cur_count; - - /* Again, this appears to be write only and/or inaccessible - * on uni-processor sun4m machines. - */ - volatile unsigned int l10_limit_noclear; - - /* This register too, it must be magic. */ - volatile unsigned int foobar; - - volatile unsigned int cfg; /* equals zero at boot time... */ -}; - -extern struct sun4m_timer_regs *sun4m_timers; - -#define SUN4D_PRM_CNT_L 0x80000000 -#define SUN4D_PRM_CNT_LVALUE 0x7FFFFC00 - -struct sun4d_timer_regs { - volatile unsigned int l10_timer_limit; - volatile unsigned int l10_cur_countx; - volatile unsigned int l10_limit_noclear; - volatile unsigned int ctrl; - volatile unsigned int l10_cur_count; -}; - -extern struct sun4d_timer_regs *sun4d_timers; - -extern __volatile__ unsigned int *master_l10_counter; -extern __volatile__ unsigned int *master_l10_limit; - -/* FIXME: Make do_[gs]ettimeofday btfixup calls */ -BTFIXUPDEF_CALL(int, bus_do_settimeofday, struct timespec *tv) -#define bus_do_settimeofday(tv) BTFIXUP_CALL(bus_do_settimeofday)(tv) - -#endif /* !(_SPARC_TIMER_H) */ diff --git a/include/asm-sparc/timex.h b/include/asm-sparc/timex.h deleted file mode 100644 index 71b45c90ccae..000000000000 --- a/include/asm-sparc/timex.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * linux/include/asm-sparc/timex.h - * - * sparc architecture timex specifications - */ -#ifndef _ASMsparc_TIMEX_H -#define _ASMsparc_TIMEX_H - -#define CLOCK_TICK_RATE 1193180 /* Underlying HZ */ - -/* XXX Maybe do something better at some point... -DaveM */ -typedef unsigned long cycles_t; -#define get_cycles() (0) - -#endif diff --git a/include/asm-sparc/tlb.h b/include/asm-sparc/tlb.h deleted file mode 100644 index 6d02d1ce53f3..000000000000 --- a/include/asm-sparc/tlb.h +++ /dev/null @@ -1,24 +0,0 @@ -#ifndef _SPARC_TLB_H -#define _SPARC_TLB_H - -#define tlb_start_vma(tlb, vma) \ -do { \ - flush_cache_range(vma, vma->vm_start, vma->vm_end); \ -} while (0) - -#define tlb_end_vma(tlb, vma) \ -do { \ - flush_tlb_range(vma, vma->vm_start, vma->vm_end); \ -} while (0) - -#define __tlb_remove_tlb_entry(tlb, pte, address) \ - do { } while (0) - -#define tlb_flush(tlb) \ -do { \ - flush_tlb_mm((tlb)->mm); \ -} while (0) - -#include <asm-generic/tlb.h> - -#endif /* _SPARC_TLB_H */ diff --git a/include/asm-sparc/tlbflush.h b/include/asm-sparc/tlbflush.h deleted file mode 100644 index b957e29d2ae1..000000000000 --- a/include/asm-sparc/tlbflush.h +++ /dev/null @@ -1,60 +0,0 @@ -#ifndef _SPARC_TLBFLUSH_H -#define _SPARC_TLBFLUSH_H - -#include <linux/mm.h> -// #include <asm/processor.h> - -/* - * TLB flushing: - * - * - flush_tlb() flushes the current mm struct TLBs XXX Exists? - * - flush_tlb_all() flushes all processes TLBs - * - flush_tlb_mm(mm) flushes the specified mm context TLB's - * - flush_tlb_page(vma, vmaddr) flushes one page - * - flush_tlb_range(vma, start, end) flushes a range of pages - * - flush_tlb_kernel_range(start, end) flushes a range of kernel pages - */ - -#ifdef CONFIG_SMP - -BTFIXUPDEF_CALL(void, local_flush_tlb_all, void) -BTFIXUPDEF_CALL(void, local_flush_tlb_mm, struct mm_struct *) -BTFIXUPDEF_CALL(void, local_flush_tlb_range, struct vm_area_struct *, unsigned long, unsigned long) -BTFIXUPDEF_CALL(void, local_flush_tlb_page, struct vm_area_struct *, unsigned long) - -#define local_flush_tlb_all() BTFIXUP_CALL(local_flush_tlb_all)() -#define local_flush_tlb_mm(mm) BTFIXUP_CALL(local_flush_tlb_mm)(mm) -#define local_flush_tlb_range(vma,start,end) BTFIXUP_CALL(local_flush_tlb_range)(vma,start,end) -#define local_flush_tlb_page(vma,addr) BTFIXUP_CALL(local_flush_tlb_page)(vma,addr) - -extern void smp_flush_tlb_all(void); -extern void smp_flush_tlb_mm(struct mm_struct *mm); -extern void smp_flush_tlb_range(struct vm_area_struct *vma, - unsigned long start, - unsigned long end); -extern void smp_flush_tlb_page(struct vm_area_struct *mm, unsigned long page); - -#endif /* CONFIG_SMP */ - -BTFIXUPDEF_CALL(void, flush_tlb_all, void) -BTFIXUPDEF_CALL(void, flush_tlb_mm, struct mm_struct *) -BTFIXUPDEF_CALL(void, flush_tlb_range, struct vm_area_struct *, unsigned long, unsigned long) -BTFIXUPDEF_CALL(void, flush_tlb_page, struct vm_area_struct *, unsigned long) - -#define flush_tlb_all() BTFIXUP_CALL(flush_tlb_all)() -#define flush_tlb_mm(mm) BTFIXUP_CALL(flush_tlb_mm)(mm) -#define flush_tlb_range(vma,start,end) BTFIXUP_CALL(flush_tlb_range)(vma,start,end) -#define flush_tlb_page(vma,addr) BTFIXUP_CALL(flush_tlb_page)(vma,addr) - -// #define flush_tlb() flush_tlb_mm(current->active_mm) /* XXX Sure? */ - -/* - * This is a kludge, until I know better. --zaitcev XXX - */ -static inline void flush_tlb_kernel_range(unsigned long start, - unsigned long end) -{ - flush_tlb_all(); -} - -#endif /* _SPARC_TLBFLUSH_H */ diff --git a/include/asm-sparc/topology.h b/include/asm-sparc/topology.h deleted file mode 100644 index ee5ac9c9da28..000000000000 --- a/include/asm-sparc/topology.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_SPARC_TOPOLOGY_H -#define _ASM_SPARC_TOPOLOGY_H - -#include <asm-generic/topology.h> - -#endif /* _ASM_SPARC_TOPOLOGY_H */ diff --git a/include/asm-sparc/traps.h b/include/asm-sparc/traps.h deleted file mode 100644 index bebdbf8f43a8..000000000000 --- a/include/asm-sparc/traps.h +++ /dev/null @@ -1,140 +0,0 @@ -/* - * traps.h: Format of entries for the Sparc trap table. - * - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - */ - -#ifndef _SPARC_TRAPS_H -#define _SPARC_TRAPS_H - -#define NUM_SPARC_TRAPS 255 - -#ifndef __ASSEMBLY__ - -/* This is for V8 compliant Sparc CPUS */ -struct tt_entry { - unsigned long inst_one; - unsigned long inst_two; - unsigned long inst_three; - unsigned long inst_four; -}; - -/* We set this to _start in system setup. */ -extern struct tt_entry *sparc_ttable; - -static inline unsigned long get_tbr(void) -{ - unsigned long tbr; - - __asm__ __volatile__("rd %%tbr, %0\n\t" : "=r" (tbr)); - return tbr; -} - -#endif /* !(__ASSEMBLY__) */ - -/* For patching the trap table at boot time, we need to know how to - * form various common Sparc instructions. Thus these macros... - */ - -#define SPARC_MOV_CONST_L3(const) (0xa6102000 | (const&0xfff)) - -/* The following assumes that the branch lies before the place we - * are branching to. This is the case for a trap vector... - * You have been warned. - */ -#define SPARC_BRANCH(dest_addr, inst_addr) \ - (0x10800000 | (((dest_addr-inst_addr)>>2)&0x3fffff)) - -#define SPARC_RD_PSR_L0 (0xa1480000) -#define SPARC_RD_WIM_L3 (0xa7500000) -#define SPARC_NOP (0x01000000) - -/* Various interesting trap levels. */ -/* First, hardware traps. */ -#define SP_TRAP_TFLT 0x1 /* Text fault */ -#define SP_TRAP_II 0x2 /* Illegal Instruction */ -#define SP_TRAP_PI 0x3 /* Privileged Instruction */ -#define SP_TRAP_FPD 0x4 /* Floating Point Disabled */ -#define SP_TRAP_WOVF 0x5 /* Window Overflow */ -#define SP_TRAP_WUNF 0x6 /* Window Underflow */ -#define SP_TRAP_MNA 0x7 /* Memory Address Unaligned */ -#define SP_TRAP_FPE 0x8 /* Floating Point Exception */ -#define SP_TRAP_DFLT 0x9 /* Data Fault */ -#define SP_TRAP_TOF 0xa /* Tag Overflow */ -#define SP_TRAP_WDOG 0xb /* Watchpoint Detected */ -#define SP_TRAP_IRQ1 0x11 /* IRQ level 1 */ -#define SP_TRAP_IRQ2 0x12 /* IRQ level 2 */ -#define SP_TRAP_IRQ3 0x13 /* IRQ level 3 */ -#define SP_TRAP_IRQ4 0x14 /* IRQ level 4 */ -#define SP_TRAP_IRQ5 0x15 /* IRQ level 5 */ -#define SP_TRAP_IRQ6 0x16 /* IRQ level 6 */ -#define SP_TRAP_IRQ7 0x17 /* IRQ level 7 */ -#define SP_TRAP_IRQ8 0x18 /* IRQ level 8 */ -#define SP_TRAP_IRQ9 0x19 /* IRQ level 9 */ -#define SP_TRAP_IRQ10 0x1a /* IRQ level 10 */ -#define SP_TRAP_IRQ11 0x1b /* IRQ level 11 */ -#define SP_TRAP_IRQ12 0x1c /* IRQ level 12 */ -#define SP_TRAP_IRQ13 0x1d /* IRQ level 13 */ -#define SP_TRAP_IRQ14 0x1e /* IRQ level 14 */ -#define SP_TRAP_IRQ15 0x1f /* IRQ level 15 Non-maskable */ -#define SP_TRAP_RACC 0x20 /* Register Access Error ??? */ -#define SP_TRAP_IACC 0x21 /* Instruction Access Error */ -#define SP_TRAP_CPDIS 0x24 /* Co-Processor Disabled */ -#define SP_TRAP_BADFL 0x25 /* Unimplemented Flush Instruction */ -#define SP_TRAP_CPEXP 0x28 /* Co-Processor Exception */ -#define SP_TRAP_DACC 0x29 /* Data Access Error */ -#define SP_TRAP_DIVZ 0x2a /* Divide By Zero */ -#define SP_TRAP_DSTORE 0x2b /* Data Store Error ??? */ -#define SP_TRAP_DMM 0x2c /* Data Access MMU Miss ??? */ -#define SP_TRAP_IMM 0x3c /* Instruction Access MMU Miss ??? */ - -/* Now the Software Traps... */ -#define SP_TRAP_SUNOS 0x80 /* SunOS System Call */ -#define SP_TRAP_SBPT 0x81 /* Software Breakpoint */ -#define SP_TRAP_SDIVZ 0x82 /* Software Divide-by-Zero trap */ -#define SP_TRAP_FWIN 0x83 /* Flush Windows */ -#define SP_TRAP_CWIN 0x84 /* Clean Windows */ -#define SP_TRAP_RCHK 0x85 /* Range Check */ -#define SP_TRAP_FUNA 0x86 /* Fix Unaligned Access */ -#define SP_TRAP_IOWFL 0x87 /* Integer Overflow */ -#define SP_TRAP_SOLARIS 0x88 /* Solaris System Call */ -#define SP_TRAP_NETBSD 0x89 /* NetBSD System Call */ -#define SP_TRAP_LINUX 0x90 /* Linux System Call */ - -/* Names used for compatibility with SunOS */ -#define ST_SYSCALL 0x00 -#define ST_BREAKPOINT 0x01 -#define ST_DIV0 0x02 -#define ST_FLUSH_WINDOWS 0x03 -#define ST_CLEAN_WINDOWS 0x04 -#define ST_RANGE_CHECK 0x05 -#define ST_FIX_ALIGN 0x06 -#define ST_INT_OVERFLOW 0x07 - -/* Special traps... */ -#define SP_TRAP_KBPT1 0xfe /* KADB/PROM Breakpoint one */ -#define SP_TRAP_KBPT2 0xff /* KADB/PROM Breakpoint two */ - -/* Handy Macros */ -/* Is this a trap we never expect to get? */ -#define BAD_TRAP_P(level) \ - ((level > SP_TRAP_WDOG && level < SP_TRAP_IRQ1) || \ - (level > SP_TRAP_IACC && level < SP_TRAP_CPDIS) || \ - (level > SP_TRAP_BADFL && level < SP_TRAP_CPEXP) || \ - (level > SP_TRAP_DMM && level < SP_TRAP_IMM) || \ - (level > SP_TRAP_IMM && level < SP_TRAP_SUNOS) || \ - (level > SP_TRAP_LINUX && level < SP_TRAP_KBPT1)) - -/* Is this a Hardware trap? */ -#define HW_TRAP_P(level) ((level > 0) && (level < SP_TRAP_SUNOS)) - -/* Is this a Software trap? */ -#define SW_TRAP_P(level) ((level >= SP_TRAP_SUNOS) && (level <= SP_TRAP_KBPT2)) - -/* Is this a system call for some OS we know about? */ -#define SCALL_TRAP_P(level) ((level == SP_TRAP_SUNOS) || \ - (level == SP_TRAP_SOLARIS) || \ - (level == SP_TRAP_NETBSD) || \ - (level == SP_TRAP_LINUX)) - -#endif /* !(_SPARC_TRAPS_H) */ diff --git a/include/asm-sparc/tsunami.h b/include/asm-sparc/tsunami.h deleted file mode 100644 index 5bbd1d523baa..000000000000 --- a/include/asm-sparc/tsunami.h +++ /dev/null @@ -1,64 +0,0 @@ -/* - * tsunami.h: Module specific definitions for Tsunami V8 Sparcs - * - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - */ - -#ifndef _SPARC_TSUNAMI_H -#define _SPARC_TSUNAMI_H - -#include <asm/asi.h> - -/* The MMU control register on the Tsunami: - * - * ----------------------------------------------------------------------- - * | implvers |SW|AV|DV|MV| RSV |PC|ITD|ALC| RSV |PE| RC |IE|DE|RSV|NF|ME| - * ----------------------------------------------------------------------- - * 31 24 23 22 21 20 19-18 17 16 14 13-12 11 10-9 8 7 6-2 1 0 - * - * SW: Enable Software Table Walks 0=off 1=on - * AV: Address View bit - * DV: Data View bit - * MV: Memory View bit - * PC: Parity Control - * ITD: ITBR disable - * ALC: Alternate Cacheable - * PE: Parity Enable 0=off 1=on - * RC: Refresh Control - * IE: Instruction cache Enable 0=off 1=on - * DE: Data cache Enable 0=off 1=on - * NF: No Fault, same as all other SRMMUs - * ME: MMU Enable, same as all other SRMMUs - */ - -#define TSUNAMI_SW 0x00800000 -#define TSUNAMI_AV 0x00400000 -#define TSUNAMI_DV 0x00200000 -#define TSUNAMI_MV 0x00100000 -#define TSUNAMI_PC 0x00020000 -#define TSUNAMI_ITD 0x00010000 -#define TSUNAMI_ALC 0x00008000 -#define TSUNAMI_PE 0x00001000 -#define TSUNAMI_RCMASK 0x00000C00 -#define TSUNAMI_IENAB 0x00000200 -#define TSUNAMI_DENAB 0x00000100 -#define TSUNAMI_NF 0x00000002 -#define TSUNAMI_ME 0x00000001 - -static inline void tsunami_flush_icache(void) -{ - __asm__ __volatile__("sta %%g0, [%%g0] %0\n\t" - : /* no outputs */ - : "i" (ASI_M_IC_FLCLEAR) - : "memory"); -} - -static inline void tsunami_flush_dcache(void) -{ - __asm__ __volatile__("sta %%g0, [%%g0] %0\n\t" - : /* no outputs */ - : "i" (ASI_M_DC_FLCLEAR) - : "memory"); -} - -#endif /* !(_SPARC_TSUNAMI_H) */ diff --git a/include/asm-sparc/turbosparc.h b/include/asm-sparc/turbosparc.h deleted file mode 100644 index 17c73282db0a..000000000000 --- a/include/asm-sparc/turbosparc.h +++ /dev/null @@ -1,125 +0,0 @@ -/* - * turbosparc.h: Defines specific to the TurboSparc module. - * This is SRMMU stuff. - * - * Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz) - */ -#ifndef _SPARC_TURBOSPARC_H -#define _SPARC_TURBOSPARC_H - -#include <asm/asi.h> -#include <asm/pgtsrmmu.h> - -/* Bits in the SRMMU control register for TurboSparc modules. - * - * ------------------------------------------------------------------- - * |impl-vers| RSV| PMC |PE|PC| RSV |BM| RFR |IC|DC|PSO|RSV|ICS|NF|ME| - * ------------------------------------------------------------------- - * 31 24 23-21 20-19 18 17 16-15 14 13-10 9 8 7 6-3 2 1 0 - * - * BM: Boot Mode -- 0 = not in boot mode, 1 = in boot mode - * - * This indicates whether the TurboSparc is in boot-mode or not. - * - * IC: Instruction Cache -- 0 = off, 1 = on - * DC: Data Cache -- 0 = off, 1 = 0n - * - * These bits enable the on-cpu TurboSparc split I/D caches. - * - * ICS: ICache Snooping -- 0 = disable, 1 = enable snooping of icache - * NF: No Fault -- 0 = faults generate traps, 1 = faults don't trap - * ME: MMU enable -- 0 = mmu not translating, 1 = mmu translating - * - */ - -#define TURBOSPARC_MMUENABLE 0x00000001 -#define TURBOSPARC_NOFAULT 0x00000002 -#define TURBOSPARC_ICSNOOP 0x00000004 -#define TURBOSPARC_PSO 0x00000080 -#define TURBOSPARC_DCENABLE 0x00000100 /* Enable data cache */ -#define TURBOSPARC_ICENABLE 0x00000200 /* Enable instruction cache */ -#define TURBOSPARC_BMODE 0x00004000 -#define TURBOSPARC_PARITYODD 0x00020000 /* Parity odd, if enabled */ -#define TURBOSPARC_PCENABLE 0x00040000 /* Enable parity checking */ - -/* Bits in the CPU configuration register for TurboSparc modules. - * - * ------------------------------------------------------- - * |IOClk|SNP|AXClk| RAH | WS | RSV |SBC|WT|uS2|SE|SCC| - * ------------------------------------------------------- - * 31 30 29-28 27-26 25-23 22-8 7-6 5 4 3 2-0 - * - */ - -#define TURBOSPARC_SCENABLE 0x00000008 /* Secondary cache enable */ -#define TURBOSPARC_uS2 0x00000010 /* Swift compatibility mode */ -#define TURBOSPARC_WTENABLE 0x00000020 /* Write thru for dcache */ -#define TURBOSPARC_SNENABLE 0x40000000 /* DVMA snoop enable */ - -#ifndef __ASSEMBLY__ - -/* Bits [13:5] select one of 512 instruction cache tags */ -static inline void turbosparc_inv_insn_tag(unsigned long addr) -{ - __asm__ __volatile__("sta %%g0, [%0] %1\n\t" - : /* no outputs */ - : "r" (addr), "i" (ASI_M_TXTC_TAG) - : "memory"); -} - -/* Bits [13:5] select one of 512 data cache tags */ -static inline void turbosparc_inv_data_tag(unsigned long addr) -{ - __asm__ __volatile__("sta %%g0, [%0] %1\n\t" - : /* no outputs */ - : "r" (addr), "i" (ASI_M_DATAC_TAG) - : "memory"); -} - -static inline void turbosparc_flush_icache(void) -{ - unsigned long addr; - - for (addr = 0; addr < 0x4000; addr += 0x20) - turbosparc_inv_insn_tag(addr); -} - -static inline void turbosparc_flush_dcache(void) -{ - unsigned long addr; - - for (addr = 0; addr < 0x4000; addr += 0x20) - turbosparc_inv_data_tag(addr); -} - -static inline void turbosparc_idflash_clear(void) -{ - unsigned long addr; - - for (addr = 0; addr < 0x4000; addr += 0x20) { - turbosparc_inv_insn_tag(addr); - turbosparc_inv_data_tag(addr); - } -} - -static inline void turbosparc_set_ccreg(unsigned long regval) -{ - __asm__ __volatile__("sta %0, [%1] %2\n\t" - : /* no outputs */ - : "r" (regval), "r" (0x600), "i" (ASI_M_MMUREGS) - : "memory"); -} - -static inline unsigned long turbosparc_get_ccreg(void) -{ - unsigned long regval; - - __asm__ __volatile__("lda [%1] %2, %0\n\t" - : "=r" (regval) - : "r" (0x600), "i" (ASI_M_MMUREGS)); - return regval; -} - -#endif /* !__ASSEMBLY__ */ - -#endif /* !(_SPARC_TURBOSPARC_H) */ diff --git a/include/asm-sparc/types.h b/include/asm-sparc/types.h deleted file mode 100644 index 07734f942405..000000000000 --- a/include/asm-sparc/types.h +++ /dev/null @@ -1,32 +0,0 @@ -#ifndef _SPARC_TYPES_H -#define _SPARC_TYPES_H - -/* - * This file is never included by application software unless - * explicitly requested (e.g., via linux/types.h) in which case the - * application is Linux specific so (user-) name space pollution is - * not a major issue. However, for interoperability, libraries still - * need to be careful to avoid a name clashes. - */ -#include <asm-generic/int-ll64.h> - -#ifndef __ASSEMBLY__ - -typedef unsigned short umode_t; - -#endif /* __ASSEMBLY__ */ - -#ifdef __KERNEL__ - -#define BITS_PER_LONG 32 - -#ifndef __ASSEMBLY__ - -typedef u32 dma_addr_t; -typedef u32 dma64_addr_t; - -#endif /* __ASSEMBLY__ */ - -#endif /* __KERNEL__ */ - -#endif /* defined(_SPARC_TYPES_H) */ diff --git a/include/asm-sparc/uaccess.h b/include/asm-sparc/uaccess.h deleted file mode 100644 index 47d5619d43fa..000000000000 --- a/include/asm-sparc/uaccess.h +++ /dev/null @@ -1,336 +0,0 @@ -/* - * uaccess.h: User space memore access functions. - * - * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu) - * Copyright (C) 1996,1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz) - */ -#ifndef _ASM_UACCESS_H -#define _ASM_UACCESS_H - -#ifdef __KERNEL__ -#include <linux/compiler.h> -#include <linux/sched.h> -#include <linux/string.h> -#include <linux/errno.h> -#include <asm/vac-ops.h> -#endif - -#ifndef __ASSEMBLY__ - -/* Sparc is not segmented, however we need to be able to fool access_ok() - * when doing system calls from kernel mode legitimately. - * - * "For historical reasons, these macros are grossly misnamed." -Linus - */ - -#define KERNEL_DS ((mm_segment_t) { 0 }) -#define USER_DS ((mm_segment_t) { -1 }) - -#define VERIFY_READ 0 -#define VERIFY_WRITE 1 - -#define get_ds() (KERNEL_DS) -#define get_fs() (current->thread.current_ds) -#define set_fs(val) ((current->thread.current_ds) = (val)) - -#define segment_eq(a,b) ((a).seg == (b).seg) - -/* We have there a nice not-mapped page at PAGE_OFFSET - PAGE_SIZE, so that this test - * can be fairly lightweight. - * No one can read/write anything from userland in the kernel space by setting - * large size and address near to PAGE_OFFSET - a fault will break his intentions. - */ -#define __user_ok(addr, size) ({ (void)(size); (addr) < STACK_TOP; }) -#define __kernel_ok (segment_eq(get_fs(), KERNEL_DS)) -#define __access_ok(addr,size) (__user_ok((addr) & get_fs().seg,(size))) -#define access_ok(type, addr, size) \ - ({ (void)(type); __access_ok((unsigned long)(addr), size); }) - -/* - * The exception table consists of pairs of addresses: the first is the - * address of an instruction that is allowed to fault, and the second is - * the address at which the program should continue. No registers are - * modified, so it is entirely up to the continuation code to figure out - * what to do. - * - * All the routines below use bits of fixup code that are out of line - * with the main instruction path. This means when everything is well, - * we don't even have to jump over them. Further, they do not intrude - * on our cache or tlb entries. - * - * There is a special way how to put a range of potentially faulting - * insns (like twenty ldd/std's with now intervening other instructions) - * You specify address of first in insn and 0 in fixup and in the next - * exception_table_entry you specify last potentially faulting insn + 1 - * and in fixup the routine which should handle the fault. - * That fixup code will get - * (faulting_insn_address - first_insn_in_the_range_address)/4 - * in %g2 (ie. index of the faulting instruction in the range). - */ - -struct exception_table_entry -{ - unsigned long insn, fixup; -}; - -/* Returns 0 if exception not found and fixup otherwise. */ -extern unsigned long search_extables_range(unsigned long addr, unsigned long *g2); - -extern void __ret_efault(void); - -/* Uh, these should become the main single-value transfer routines.. - * They automatically use the right size if we just have the right - * pointer type.. - * - * This gets kind of ugly. We want to return _two_ values in "get_user()" - * and yet we don't want to do any pointers, because that is too much - * of a performance impact. Thus we have a few rather ugly macros here, - * and hide all the ugliness from the user. - */ -#define put_user(x,ptr) ({ \ -unsigned long __pu_addr = (unsigned long)(ptr); \ -__chk_user_ptr(ptr); \ -__put_user_check((__typeof__(*(ptr)))(x),__pu_addr,sizeof(*(ptr))); }) - -#define get_user(x,ptr) ({ \ -unsigned long __gu_addr = (unsigned long)(ptr); \ -__chk_user_ptr(ptr); \ -__get_user_check((x),__gu_addr,sizeof(*(ptr)),__typeof__(*(ptr))); }) - -/* - * The "__xxx" versions do not do address space checking, useful when - * doing multiple accesses to the same area (the user has to do the - * checks by hand with "access_ok()") - */ -#define __put_user(x,ptr) __put_user_nocheck((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr))) -#define __get_user(x,ptr) __get_user_nocheck((x),(ptr),sizeof(*(ptr)),__typeof__(*(ptr))) - -struct __large_struct { unsigned long buf[100]; }; -#define __m(x) ((struct __large_struct __user *)(x)) - -#define __put_user_check(x,addr,size) ({ \ -register int __pu_ret; \ -if (__access_ok(addr,size)) { \ -switch (size) { \ -case 1: __put_user_asm(x,b,addr,__pu_ret); break; \ -case 2: __put_user_asm(x,h,addr,__pu_ret); break; \ -case 4: __put_user_asm(x,,addr,__pu_ret); break; \ -case 8: __put_user_asm(x,d,addr,__pu_ret); break; \ -default: __pu_ret = __put_user_bad(); break; \ -} } else { __pu_ret = -EFAULT; } __pu_ret; }) - -#define __put_user_nocheck(x,addr,size) ({ \ -register int __pu_ret; \ -switch (size) { \ -case 1: __put_user_asm(x,b,addr,__pu_ret); break; \ -case 2: __put_user_asm(x,h,addr,__pu_ret); break; \ -case 4: __put_user_asm(x,,addr,__pu_ret); break; \ -case 8: __put_user_asm(x,d,addr,__pu_ret); break; \ -default: __pu_ret = __put_user_bad(); break; \ -} __pu_ret; }) - -#define __put_user_asm(x,size,addr,ret) \ -__asm__ __volatile__( \ - "/* Put user asm, inline. */\n" \ -"1:\t" "st"#size " %1, %2\n\t" \ - "clr %0\n" \ -"2:\n\n\t" \ - ".section .fixup,#alloc,#execinstr\n\t" \ - ".align 4\n" \ -"3:\n\t" \ - "b 2b\n\t" \ - " mov %3, %0\n\t" \ - ".previous\n\n\t" \ - ".section __ex_table,#alloc\n\t" \ - ".align 4\n\t" \ - ".word 1b, 3b\n\t" \ - ".previous\n\n\t" \ - : "=&r" (ret) : "r" (x), "m" (*__m(addr)), \ - "i" (-EFAULT)) - -extern int __put_user_bad(void); - -#define __get_user_check(x,addr,size,type) ({ \ -register int __gu_ret; \ -register unsigned long __gu_val; \ -if (__access_ok(addr,size)) { \ -switch (size) { \ -case 1: __get_user_asm(__gu_val,ub,addr,__gu_ret); break; \ -case 2: __get_user_asm(__gu_val,uh,addr,__gu_ret); break; \ -case 4: __get_user_asm(__gu_val,,addr,__gu_ret); break; \ -case 8: __get_user_asm(__gu_val,d,addr,__gu_ret); break; \ -default: __gu_val = 0; __gu_ret = __get_user_bad(); break; \ -} } else { __gu_val = 0; __gu_ret = -EFAULT; } x = (type) __gu_val; __gu_ret; }) - -#define __get_user_check_ret(x,addr,size,type,retval) ({ \ -register unsigned long __gu_val __asm__ ("l1"); \ -if (__access_ok(addr,size)) { \ -switch (size) { \ -case 1: __get_user_asm_ret(__gu_val,ub,addr,retval); break; \ -case 2: __get_user_asm_ret(__gu_val,uh,addr,retval); break; \ -case 4: __get_user_asm_ret(__gu_val,,addr,retval); break; \ -case 8: __get_user_asm_ret(__gu_val,d,addr,retval); break; \ -default: if (__get_user_bad()) return retval; \ -} x = (type) __gu_val; } else return retval; }) - -#define __get_user_nocheck(x,addr,size,type) ({ \ -register int __gu_ret; \ -register unsigned long __gu_val; \ -switch (size) { \ -case 1: __get_user_asm(__gu_val,ub,addr,__gu_ret); break; \ -case 2: __get_user_asm(__gu_val,uh,addr,__gu_ret); break; \ -case 4: __get_user_asm(__gu_val,,addr,__gu_ret); break; \ -case 8: __get_user_asm(__gu_val,d,addr,__gu_ret); break; \ -default: __gu_val = 0; __gu_ret = __get_user_bad(); break; \ -} x = (type) __gu_val; __gu_ret; }) - -#define __get_user_nocheck_ret(x,addr,size,type,retval) ({ \ -register unsigned long __gu_val __asm__ ("l1"); \ -switch (size) { \ -case 1: __get_user_asm_ret(__gu_val,ub,addr,retval); break; \ -case 2: __get_user_asm_ret(__gu_val,uh,addr,retval); break; \ -case 4: __get_user_asm_ret(__gu_val,,addr,retval); break; \ -case 8: __get_user_asm_ret(__gu_val,d,addr,retval); break; \ -default: if (__get_user_bad()) return retval; \ -} x = (type) __gu_val; }) - -#define __get_user_asm(x,size,addr,ret) \ -__asm__ __volatile__( \ - "/* Get user asm, inline. */\n" \ -"1:\t" "ld"#size " %2, %1\n\t" \ - "clr %0\n" \ -"2:\n\n\t" \ - ".section .fixup,#alloc,#execinstr\n\t" \ - ".align 4\n" \ -"3:\n\t" \ - "clr %1\n\t" \ - "b 2b\n\t" \ - " mov %3, %0\n\n\t" \ - ".previous\n\t" \ - ".section __ex_table,#alloc\n\t" \ - ".align 4\n\t" \ - ".word 1b, 3b\n\n\t" \ - ".previous\n\t" \ - : "=&r" (ret), "=&r" (x) : "m" (*__m(addr)), \ - "i" (-EFAULT)) - -#define __get_user_asm_ret(x,size,addr,retval) \ -if (__builtin_constant_p(retval) && retval == -EFAULT) \ -__asm__ __volatile__( \ - "/* Get user asm ret, inline. */\n" \ -"1:\t" "ld"#size " %1, %0\n\n\t" \ - ".section __ex_table,#alloc\n\t" \ - ".align 4\n\t" \ - ".word 1b,__ret_efault\n\n\t" \ - ".previous\n\t" \ - : "=&r" (x) : "m" (*__m(addr))); \ -else \ -__asm__ __volatile__( \ - "/* Get user asm ret, inline. */\n" \ -"1:\t" "ld"#size " %1, %0\n\n\t" \ - ".section .fixup,#alloc,#execinstr\n\t" \ - ".align 4\n" \ -"3:\n\t" \ - "ret\n\t" \ - " restore %%g0, %2, %%o0\n\n\t" \ - ".previous\n\t" \ - ".section __ex_table,#alloc\n\t" \ - ".align 4\n\t" \ - ".word 1b, 3b\n\n\t" \ - ".previous\n\t" \ - : "=&r" (x) : "m" (*__m(addr)), "i" (retval)) - -extern int __get_user_bad(void); - -extern unsigned long __copy_user(void __user *to, const void __user *from, unsigned long size); - -static inline unsigned long copy_to_user(void __user *to, const void *from, unsigned long n) -{ - if (n && __access_ok((unsigned long) to, n)) - return __copy_user(to, (__force void __user *) from, n); - else - return n; -} - -static inline unsigned long __copy_to_user(void __user *to, const void *from, unsigned long n) -{ - return __copy_user(to, (__force void __user *) from, n); -} - -static inline unsigned long copy_from_user(void *to, const void __user *from, unsigned long n) -{ - if (n && __access_ok((unsigned long) from, n)) - return __copy_user((__force void __user *) to, from, n); - else - return n; -} - -static inline unsigned long __copy_from_user(void *to, const void __user *from, unsigned long n) -{ - return __copy_user((__force void __user *) to, from, n); -} - -#define __copy_to_user_inatomic __copy_to_user -#define __copy_from_user_inatomic __copy_from_user - -static inline unsigned long __clear_user(void __user *addr, unsigned long size) -{ - unsigned long ret; - - __asm__ __volatile__ ( - ".section __ex_table,#alloc\n\t" - ".align 4\n\t" - ".word 1f,3\n\t" - ".previous\n\t" - "mov %2, %%o1\n" - "1:\n\t" - "call __bzero\n\t" - " mov %1, %%o0\n\t" - "mov %%o0, %0\n" - : "=r" (ret) : "r" (addr), "r" (size) : - "o0", "o1", "o2", "o3", "o4", "o5", "o7", - "g1", "g2", "g3", "g4", "g5", "g7", "cc"); - - return ret; -} - -static inline unsigned long clear_user(void __user *addr, unsigned long n) -{ - if (n && __access_ok((unsigned long) addr, n)) - return __clear_user(addr, n); - else - return n; -} - -extern long __strncpy_from_user(char *dest, const char __user *src, long count); - -static inline long strncpy_from_user(char *dest, const char __user *src, long count) -{ - if (__access_ok((unsigned long) src, count)) - return __strncpy_from_user(dest, src, count); - else - return -EFAULT; -} - -extern long __strlen_user(const char __user *); -extern long __strnlen_user(const char __user *, long len); - -static inline long strlen_user(const char __user *str) -{ - if (!access_ok(VERIFY_READ, str, 0)) - return 0; - else - return __strlen_user(str); -} - -static inline long strnlen_user(const char __user *str, long len) -{ - if (!access_ok(VERIFY_READ, str, 0)) - return 0; - else - return __strnlen_user(str, len); -} - -#endif /* __ASSEMBLY__ */ - -#endif /* _ASM_UACCESS_H */ diff --git a/include/asm-sparc/unaligned.h b/include/asm-sparc/unaligned.h deleted file mode 100644 index 11d2d5fb5902..000000000000 --- a/include/asm-sparc/unaligned.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef _ASM_SPARC_UNALIGNED_H -#define _ASM_SPARC_UNALIGNED_H - -#include <linux/unaligned/be_struct.h> -#include <linux/unaligned/le_byteshift.h> -#include <linux/unaligned/generic.h> -#define get_unaligned __get_unaligned_be -#define put_unaligned __put_unaligned_be - -#endif /* _ASM_SPARC_UNALIGNED_H */ diff --git a/include/asm-sparc/unistd.h b/include/asm-sparc/unistd.h deleted file mode 100644 index 2338a0276377..000000000000 --- a/include/asm-sparc/unistd.h +++ /dev/null @@ -1,378 +0,0 @@ -#ifndef _SPARC_UNISTD_H -#define _SPARC_UNISTD_H - -/* - * System calls under the Sparc. - * - * Don't be scared by the ugly clobbers, it is the only way I can - * think of right now to force the arguments into fixed registers - * before the trap into the system call with gcc 'asm' statements. - * - * Copyright (C) 1995, 2007 David S. Miller (davem@davemloft.net) - * - * SunOS compatibility based upon preliminary work which is: - * - * Copyright (C) 1995 Adrian M. Rodriguez (adrian@remus.rutgers.edu) - */ - -#define __NR_restart_syscall 0 /* Linux Specific */ -#define __NR_exit 1 /* Common */ -#define __NR_fork 2 /* Common */ -#define __NR_read 3 /* Common */ -#define __NR_write 4 /* Common */ -#define __NR_open 5 /* Common */ -#define __NR_close 6 /* Common */ -#define __NR_wait4 7 /* Common */ -#define __NR_creat 8 /* Common */ -#define __NR_link 9 /* Common */ -#define __NR_unlink 10 /* Common */ -#define __NR_execv 11 /* SunOS Specific */ -#define __NR_chdir 12 /* Common */ -#define __NR_chown 13 /* Common */ -#define __NR_mknod 14 /* Common */ -#define __NR_chmod 15 /* Common */ -#define __NR_lchown 16 /* Common */ -#define __NR_brk 17 /* Common */ -#define __NR_perfctr 18 /* Performance counter operations */ -#define __NR_lseek 19 /* Common */ -#define __NR_getpid 20 /* Common */ -#define __NR_capget 21 /* Linux Specific */ -#define __NR_capset 22 /* Linux Specific */ -#define __NR_setuid 23 /* Implemented via setreuid in SunOS */ -#define __NR_getuid 24 /* Common */ -#define __NR_vmsplice 25 /* ENOSYS under SunOS */ -#define __NR_ptrace 26 /* Common */ -#define __NR_alarm 27 /* Implemented via setitimer in SunOS */ -#define __NR_sigaltstack 28 /* Common */ -#define __NR_pause 29 /* Is sigblock(0)->sigpause() in SunOS */ -#define __NR_utime 30 /* Implemented via utimes() under SunOS */ -#define __NR_lchown32 31 /* Linux sparc32 specific */ -#define __NR_fchown32 32 /* Linux sparc32 specific */ -#define __NR_access 33 /* Common */ -#define __NR_nice 34 /* Implemented via get/setpriority() in SunOS */ -#define __NR_chown32 35 /* Linux sparc32 specific */ -#define __NR_sync 36 /* Common */ -#define __NR_kill 37 /* Common */ -#define __NR_stat 38 /* Common */ -#define __NR_sendfile 39 /* Linux Specific */ -#define __NR_lstat 40 /* Common */ -#define __NR_dup 41 /* Common */ -#define __NR_pipe 42 /* Common */ -#define __NR_times 43 /* Implemented via getrusage() in SunOS */ -#define __NR_getuid32 44 /* Linux sparc32 specific */ -#define __NR_umount2 45 /* Linux Specific */ -#define __NR_setgid 46 /* Implemented via setregid() in SunOS */ -#define __NR_getgid 47 /* Common */ -#define __NR_signal 48 /* Implemented via sigvec() in SunOS */ -#define __NR_geteuid 49 /* SunOS calls getuid() */ -#define __NR_getegid 50 /* SunOS calls getgid() */ -#define __NR_acct 51 /* Common */ -/* #define __NR_memory_ordering 52 Linux sparc64 specific */ -#define __NR_getgid32 53 /* Linux sparc32 specific */ -#define __NR_ioctl 54 /* Common */ -#define __NR_reboot 55 /* Common */ -#define __NR_mmap2 56 /* Linux sparc32 Specific */ -#define __NR_symlink 57 /* Common */ -#define __NR_readlink 58 /* Common */ -#define __NR_execve 59 /* Common */ -#define __NR_umask 60 /* Common */ -#define __NR_chroot 61 /* Common */ -#define __NR_fstat 62 /* Common */ -#define __NR_fstat64 63 /* Linux Specific */ -#define __NR_getpagesize 64 /* Common */ -#define __NR_msync 65 /* Common in newer 1.3.x revs... */ -#define __NR_vfork 66 /* Common */ -#define __NR_pread64 67 /* Linux Specific */ -#define __NR_pwrite64 68 /* Linux Specific */ -#define __NR_geteuid32 69 /* Linux sparc32, sbrk under SunOS */ -#define __NR_getegid32 70 /* Linux sparc32, sstk under SunOS */ -#define __NR_mmap 71 /* Common */ -#define __NR_setreuid32 72 /* Linux sparc32, vadvise under SunOS */ -#define __NR_munmap 73 /* Common */ -#define __NR_mprotect 74 /* Common */ -#define __NR_madvise 75 /* Common */ -#define __NR_vhangup 76 /* Common */ -#define __NR_truncate64 77 /* Linux sparc32 Specific */ -#define __NR_mincore 78 /* Common */ -#define __NR_getgroups 79 /* Common */ -#define __NR_setgroups 80 /* Common */ -#define __NR_getpgrp 81 /* Common */ -#define __NR_setgroups32 82 /* Linux sparc32, setpgrp under SunOS */ -#define __NR_setitimer 83 /* Common */ -#define __NR_ftruncate64 84 /* Linux sparc32 Specific */ -#define __NR_swapon 85 /* Common */ -#define __NR_getitimer 86 /* Common */ -#define __NR_setuid32 87 /* Linux sparc32, gethostname under SunOS */ -#define __NR_sethostname 88 /* Common */ -#define __NR_setgid32 89 /* Linux sparc32, getdtablesize under SunOS */ -#define __NR_dup2 90 /* Common */ -#define __NR_setfsuid32 91 /* Linux sparc32, getdopt under SunOS */ -#define __NR_fcntl 92 /* Common */ -#define __NR_select 93 /* Common */ -#define __NR_setfsgid32 94 /* Linux sparc32, setdopt under SunOS */ -#define __NR_fsync 95 /* Common */ -#define __NR_setpriority 96 /* Common */ -#define __NR_socket 97 /* Common */ -#define __NR_connect 98 /* Common */ -#define __NR_accept 99 /* Common */ -#define __NR_getpriority 100 /* Common */ -#define __NR_rt_sigreturn 101 /* Linux Specific */ -#define __NR_rt_sigaction 102 /* Linux Specific */ -#define __NR_rt_sigprocmask 103 /* Linux Specific */ -#define __NR_rt_sigpending 104 /* Linux Specific */ -#define __NR_rt_sigtimedwait 105 /* Linux Specific */ -#define __NR_rt_sigqueueinfo 106 /* Linux Specific */ -#define __NR_rt_sigsuspend 107 /* Linux Specific */ -#define __NR_setresuid32 108 /* Linux Specific, sigvec under SunOS */ -#define __NR_getresuid32 109 /* Linux Specific, sigblock under SunOS */ -#define __NR_setresgid32 110 /* Linux Specific, sigsetmask under SunOS */ -#define __NR_getresgid32 111 /* Linux Specific, sigpause under SunOS */ -#define __NR_setregid32 112 /* Linux sparc32, sigstack under SunOS */ -#define __NR_recvmsg 113 /* Common */ -#define __NR_sendmsg 114 /* Common */ -#define __NR_getgroups32 115 /* Linux sparc32, vtrace under SunOS */ -#define __NR_gettimeofday 116 /* Common */ -#define __NR_getrusage 117 /* Common */ -#define __NR_getsockopt 118 /* Common */ -#define __NR_getcwd 119 /* Linux Specific */ -#define __NR_readv 120 /* Common */ -#define __NR_writev 121 /* Common */ -#define __NR_settimeofday 122 /* Common */ -#define __NR_fchown 123 /* Common */ -#define __NR_fchmod 124 /* Common */ -#define __NR_recvfrom 125 /* Common */ -#define __NR_setreuid 126 /* Common */ -#define __NR_setregid 127 /* Common */ -#define __NR_rename 128 /* Common */ -#define __NR_truncate 129 /* Common */ -#define __NR_ftruncate 130 /* Common */ -#define __NR_flock 131 /* Common */ -#define __NR_lstat64 132 /* Linux Specific */ -#define __NR_sendto 133 /* Common */ -#define __NR_shutdown 134 /* Common */ -#define __NR_socketpair 135 /* Common */ -#define __NR_mkdir 136 /* Common */ -#define __NR_rmdir 137 /* Common */ -#define __NR_utimes 138 /* SunOS Specific */ -#define __NR_stat64 139 /* Linux Specific */ -#define __NR_sendfile64 140 /* adjtime under SunOS */ -#define __NR_getpeername 141 /* Common */ -#define __NR_futex 142 /* gethostid under SunOS */ -#define __NR_gettid 143 /* ENOSYS under SunOS */ -#define __NR_getrlimit 144 /* Common */ -#define __NR_setrlimit 145 /* Common */ -#define __NR_pivot_root 146 /* Linux Specific, killpg under SunOS */ -#define __NR_prctl 147 /* ENOSYS under SunOS */ -#define __NR_pciconfig_read 148 /* ENOSYS under SunOS */ -#define __NR_pciconfig_write 149 /* ENOSYS under SunOS */ -#define __NR_getsockname 150 /* Common */ -#define __NR_inotify_init 151 /* Linux specific */ -#define __NR_inotify_add_watch 152 /* Linux specific */ -#define __NR_poll 153 /* Common */ -#define __NR_getdents64 154 /* Linux specific */ -#define __NR_fcntl64 155 /* Linux sparc32 Specific */ -#define __NR_inotify_rm_watch 156 /* Linux specific */ -#define __NR_statfs 157 /* Common */ -#define __NR_fstatfs 158 /* Common */ -#define __NR_umount 159 /* Common */ -#define __NR_sched_set_affinity 160 /* Linux specific, async_daemon under SunOS */ -#define __NR_sched_get_affinity 161 /* Linux specific, getfh under SunOS */ -#define __NR_getdomainname 162 /* SunOS Specific */ -#define __NR_setdomainname 163 /* Common */ -/* #define __NR_utrap_install 164 Linux sparc64 specific */ -#define __NR_quotactl 165 /* Common */ -#define __NR_set_tid_address 166 /* Linux specific, exportfs under SunOS */ -#define __NR_mount 167 /* Common */ -#define __NR_ustat 168 /* Common */ -#define __NR_setxattr 169 /* SunOS: semsys */ -#define __NR_lsetxattr 170 /* SunOS: msgsys */ -#define __NR_fsetxattr 171 /* SunOS: shmsys */ -#define __NR_getxattr 172 /* SunOS: auditsys */ -#define __NR_lgetxattr 173 /* SunOS: rfssys */ -#define __NR_getdents 174 /* Common */ -#define __NR_setsid 175 /* Common */ -#define __NR_fchdir 176 /* Common */ -#define __NR_fgetxattr 177 /* SunOS: fchroot */ -#define __NR_listxattr 178 /* SunOS: vpixsys */ -#define __NR_llistxattr 179 /* SunOS: aioread */ -#define __NR_flistxattr 180 /* SunOS: aiowrite */ -#define __NR_removexattr 181 /* SunOS: aiowait */ -#define __NR_lremovexattr 182 /* SunOS: aiocancel */ -#define __NR_sigpending 183 /* Common */ -#define __NR_query_module 184 /* Linux Specific */ -#define __NR_setpgid 185 /* Common */ -#define __NR_fremovexattr 186 /* SunOS: pathconf */ -#define __NR_tkill 187 /* SunOS: fpathconf */ -#define __NR_exit_group 188 /* Linux specific, sysconf undef SunOS */ -#define __NR_uname 189 /* Linux Specific */ -#define __NR_init_module 190 /* Linux Specific */ -#define __NR_personality 191 /* Linux Specific */ -#define __NR_remap_file_pages 192 /* Linux Specific */ -#define __NR_epoll_create 193 /* Linux Specific */ -#define __NR_epoll_ctl 194 /* Linux Specific */ -#define __NR_epoll_wait 195 /* Linux Specific */ -#define __NR_ioprio_set 196 /* Linux Specific */ -#define __NR_getppid 197 /* Linux Specific */ -#define __NR_sigaction 198 /* Linux Specific */ -#define __NR_sgetmask 199 /* Linux Specific */ -#define __NR_ssetmask 200 /* Linux Specific */ -#define __NR_sigsuspend 201 /* Linux Specific */ -#define __NR_oldlstat 202 /* Linux Specific */ -#define __NR_uselib 203 /* Linux Specific */ -#define __NR_readdir 204 /* Linux Specific */ -#define __NR_readahead 205 /* Linux Specific */ -#define __NR_socketcall 206 /* Linux Specific */ -#define __NR_syslog 207 /* Linux Specific */ -#define __NR_lookup_dcookie 208 /* Linux Specific */ -#define __NR_fadvise64 209 /* Linux Specific */ -#define __NR_fadvise64_64 210 /* Linux Specific */ -#define __NR_tgkill 211 /* Linux Specific */ -#define __NR_waitpid 212 /* Linux Specific */ -#define __NR_swapoff 213 /* Linux Specific */ -#define __NR_sysinfo 214 /* Linux Specific */ -#define __NR_ipc 215 /* Linux Specific */ -#define __NR_sigreturn 216 /* Linux Specific */ -#define __NR_clone 217 /* Linux Specific */ -#define __NR_ioprio_get 218 /* Linux Specific */ -#define __NR_adjtimex 219 /* Linux Specific */ -#define __NR_sigprocmask 220 /* Linux Specific */ -#define __NR_create_module 221 /* Linux Specific */ -#define __NR_delete_module 222 /* Linux Specific */ -#define __NR_get_kernel_syms 223 /* Linux Specific */ -#define __NR_getpgid 224 /* Linux Specific */ -#define __NR_bdflush 225 /* Linux Specific */ -#define __NR_sysfs 226 /* Linux Specific */ -#define __NR_afs_syscall 227 /* Linux Specific */ -#define __NR_setfsuid 228 /* Linux Specific */ -#define __NR_setfsgid 229 /* Linux Specific */ -#define __NR__newselect 230 /* Linux Specific */ -#define __NR_time 231 /* Linux Specific */ -#define __NR_splice 232 /* Linux Specific */ -#define __NR_stime 233 /* Linux Specific */ -#define __NR_statfs64 234 /* Linux Specific */ -#define __NR_fstatfs64 235 /* Linux Specific */ -#define __NR__llseek 236 /* Linux Specific */ -#define __NR_mlock 237 -#define __NR_munlock 238 -#define __NR_mlockall 239 -#define __NR_munlockall 240 -#define __NR_sched_setparam 241 -#define __NR_sched_getparam 242 -#define __NR_sched_setscheduler 243 -#define __NR_sched_getscheduler 244 -#define __NR_sched_yield 245 -#define __NR_sched_get_priority_max 246 -#define __NR_sched_get_priority_min 247 -#define __NR_sched_rr_get_interval 248 -#define __NR_nanosleep 249 -#define __NR_mremap 250 -#define __NR__sysctl 251 -#define __NR_getsid 252 -#define __NR_fdatasync 253 -#define __NR_nfsservctl 254 -#define __NR_sync_file_range 255 -#define __NR_clock_settime 256 -#define __NR_clock_gettime 257 -#define __NR_clock_getres 258 -#define __NR_clock_nanosleep 259 -#define __NR_sched_getaffinity 260 -#define __NR_sched_setaffinity 261 -#define __NR_timer_settime 262 -#define __NR_timer_gettime 263 -#define __NR_timer_getoverrun 264 -#define __NR_timer_delete 265 -#define __NR_timer_create 266 -/* #define __NR_vserver 267 Reserved for VSERVER */ -#define __NR_io_setup 268 -#define __NR_io_destroy 269 -#define __NR_io_submit 270 -#define __NR_io_cancel 271 -#define __NR_io_getevents 272 -#define __NR_mq_open 273 -#define __NR_mq_unlink 274 -#define __NR_mq_timedsend 275 -#define __NR_mq_timedreceive 276 -#define __NR_mq_notify 277 -#define __NR_mq_getsetattr 278 -#define __NR_waitid 279 -#define __NR_tee 280 -#define __NR_add_key 281 -#define __NR_request_key 282 -#define __NR_keyctl 283 -#define __NR_openat 284 -#define __NR_mkdirat 285 -#define __NR_mknodat 286 -#define __NR_fchownat 287 -#define __NR_futimesat 288 -#define __NR_fstatat64 289 -#define __NR_unlinkat 290 -#define __NR_renameat 291 -#define __NR_linkat 292 -#define __NR_symlinkat 293 -#define __NR_readlinkat 294 -#define __NR_fchmodat 295 -#define __NR_faccessat 296 -#define __NR_pselect6 297 -#define __NR_ppoll 298 -#define __NR_unshare 299 -#define __NR_set_robust_list 300 -#define __NR_get_robust_list 301 -#define __NR_migrate_pages 302 -#define __NR_mbind 303 -#define __NR_get_mempolicy 304 -#define __NR_set_mempolicy 305 -#define __NR_kexec_load 306 -#define __NR_move_pages 307 -#define __NR_getcpu 308 -#define __NR_epoll_pwait 309 -#define __NR_utimensat 310 -#define __NR_signalfd 311 -#define __NR_timerfd_create 312 -#define __NR_eventfd 313 -#define __NR_fallocate 314 -#define __NR_timerfd_settime 315 -#define __NR_timerfd_gettime 316 - -#define NR_SYSCALLS 317 - -/* Sparc 32-bit only has the "setresuid32", "getresuid32" variants, - * it never had the plain ones and there is no value to adding those - * old versions into the syscall table. - */ -#define __IGNORE_setresuid -#define __IGNORE_getresuid -#define __IGNORE_setresgid -#define __IGNORE_getresgid - -#ifdef __KERNEL__ -#define __ARCH_WANT_IPC_PARSE_VERSION -#define __ARCH_WANT_OLD_READDIR -#define __ARCH_WANT_STAT64 -#define __ARCH_WANT_SYS_ALARM -#define __ARCH_WANT_SYS_GETHOSTNAME -#define __ARCH_WANT_SYS_PAUSE -#define __ARCH_WANT_SYS_SGETMASK -#define __ARCH_WANT_SYS_SIGNAL -#define __ARCH_WANT_SYS_TIME -#define __ARCH_WANT_SYS_UTIME -#define __ARCH_WANT_SYS_WAITPID -#define __ARCH_WANT_SYS_SOCKETCALL -#define __ARCH_WANT_SYS_FADVISE64 -#define __ARCH_WANT_SYS_GETPGRP -#define __ARCH_WANT_SYS_LLSEEK -#define __ARCH_WANT_SYS_NICE -#define __ARCH_WANT_SYS_OLDUMOUNT -#define __ARCH_WANT_SYS_SIGPENDING -#define __ARCH_WANT_SYS_SIGPROCMASK -#define __ARCH_WANT_SYS_RT_SIGSUSPEND - -/* - * "Conditional" syscalls - * - * What we want is __attribute__((weak,alias("sys_ni_syscall"))), - * but it doesn't work on all toolchains, so we just do it by hand - */ -#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall") - -#endif /* __KERNEL__ */ -#endif /* _SPARC_UNISTD_H */ diff --git a/include/asm-sparc/user.h b/include/asm-sparc/user.h deleted file mode 100644 index 3400ea87f148..000000000000 --- a/include/asm-sparc/user.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _SPARC_USER_H -#define _SPARC_USER_H - -/* Nothing to define. */ - -#endif /* !(_SPARC_USER_H) */ diff --git a/include/asm-sparc/vac-ops.h b/include/asm-sparc/vac-ops.h deleted file mode 100644 index d10527611f11..000000000000 --- a/include/asm-sparc/vac-ops.h +++ /dev/null @@ -1,134 +0,0 @@ -#ifndef _SPARC_VAC_OPS_H -#define _SPARC_VAC_OPS_H - -/* vac-ops.h: Inline assembly routines to do operations on the Sparc - * VAC (virtual address cache) for the sun4c. - * - * Copyright (C) 1994, David S. Miller (davem@caip.rutgers.edu) - */ - -#include <asm/sysen.h> -#include <asm/contregs.h> -#include <asm/asi.h> - -/* The SUN4C models have a virtually addressed write-through - * cache. - * - * The cache tags are directly accessible through an ASI and - * each have the form: - * - * ------------------------------------------------------------ - * | MBZ | CONTEXT | WRITE | PRIV | VALID | MBZ | TagID | MBZ | - * ------------------------------------------------------------ - * 31 25 24 22 21 20 19 18 16 15 2 1 0 - * - * MBZ: These bits are either unused and/or reserved and should - * be written as zeroes. - * - * CONTEXT: Records the context to which this cache line belongs. - * - * WRITE: A copy of the writable bit from the mmu pte access bits. - * - * PRIV: A copy of the privileged bit from the pte access bits. - * - * VALID: If set, this line is valid, else invalid. - * - * TagID: Fourteen bits of tag ID. - * - * Every virtual address is seen by the cache like this: - * - * ---------------------------------------- - * | RESV | TagID | LINE | BYTE-in-LINE | - * ---------------------------------------- - * 31 30 29 16 15 4 3 0 - * - * RESV: Unused/reserved. - * - * TagID: Used to match the Tag-ID in that vac tags. - * - * LINE: Which line within the cache - * - * BYTE-in-LINE: Which byte within the cache line. - */ - -/* Sun4c VAC Tags */ -#define S4CVACTAG_CID 0x01c00000 -#define S4CVACTAG_W 0x00200000 -#define S4CVACTAG_P 0x00100000 -#define S4CVACTAG_V 0x00080000 -#define S4CVACTAG_TID 0x0000fffc - -/* Sun4c VAC Virtual Address */ -/* These aren't used, why bother? (Anton) */ -#if 0 -#define S4CVACVA_TID 0x3fff0000 -#define S4CVACVA_LINE 0x0000fff0 -#define S4CVACVA_BIL 0x0000000f -#endif - -/* The indexing of cache lines creates a problem. Because the line - * field of a virtual address extends past the page offset within - * the virtual address it is possible to have what are called - * 'bad aliases' which will create inconsistencies. So we must make - * sure that within a context that if a physical page is mapped - * more than once, that 'extra' line bits are the same. If this is - * not the case, and thus is a 'bad alias' we must turn off the - * cacheable bit in the pte's of all such pages. - */ - -#ifdef CONFIG_SUN4 -#define S4CVAC_BADBITS 0x0001e000 -#else -#define S4CVAC_BADBITS 0x0000f000 -#endif - -/* The following is true if vaddr1 and vaddr2 would cause - * a 'bad alias'. - */ -#define S4CVAC_BADALIAS(vaddr1, vaddr2) \ - ((((unsigned long) (vaddr1)) ^ ((unsigned long) (vaddr2))) & \ - (S4CVAC_BADBITS)) - -/* The following structure describes the characteristics of a sun4c - * VAC as probed from the prom during boot time. - */ -struct sun4c_vac_props { - unsigned int num_bytes; /* Size of the cache */ - unsigned int num_lines; /* Number of cache lines */ - unsigned int do_hwflushes; /* Hardware flushing available? */ - enum { VAC_NONE, VAC_WRITE_THROUGH, - VAC_WRITE_BACK } type; /* What type of VAC? */ - unsigned int linesize; /* Size of each line in bytes */ - unsigned int log2lsize; /* log2(linesize) */ - unsigned int on; /* VAC is enabled */ -}; - -extern struct sun4c_vac_props sun4c_vacinfo; - -/* sun4c_enable_vac() enables the sun4c virtual address cache. */ -static inline void sun4c_enable_vac(void) -{ - __asm__ __volatile__("lduba [%0] %1, %%g1\n\t" - "or %%g1, %2, %%g1\n\t" - "stba %%g1, [%0] %1\n\t" - : /* no outputs */ - : "r" ((unsigned int) AC_SENABLE), - "i" (ASI_CONTROL), "i" (SENABLE_CACHE) - : "g1", "memory"); - sun4c_vacinfo.on = 1; -} - -/* sun4c_disable_vac() disables the virtual address cache. */ -static inline void sun4c_disable_vac(void) -{ - __asm__ __volatile__("lduba [%0] %1, %%g1\n\t" - "andn %%g1, %2, %%g1\n\t" - "stba %%g1, [%0] %1\n\t" - : /* no outputs */ - : "r" ((unsigned int) AC_SENABLE), - "i" (ASI_CONTROL), "i" (SENABLE_CACHE) - : "g1", "memory"); - sun4c_vacinfo.on = 0; -} - -#endif /* !(_SPARC_VAC_OPS_H) */ diff --git a/include/asm-sparc/vaddrs.h b/include/asm-sparc/vaddrs.h deleted file mode 100644 index f6ca4779056c..000000000000 --- a/include/asm-sparc/vaddrs.h +++ /dev/null @@ -1,69 +0,0 @@ -#ifndef _SPARC_VADDRS_H -#define _SPARC_VADDRS_H - -#include <asm/head.h> - -/* - * asm-sparc/vaddrs.h: Here we define the virtual addresses at - * which important things will be mapped. - * - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - * Copyright (C) 2000 Anton Blanchard (anton@samba.org) - */ - -#define SRMMU_MAXMEM 0x0c000000 - -#define SRMMU_NOCACHE_VADDR (KERNBASE + SRMMU_MAXMEM) - /* = 0x0fc000000 */ -/* XXX Empiricals - this needs to go away - KMW */ -#define SRMMU_MIN_NOCACHE_PAGES (550) -#define SRMMU_MAX_NOCACHE_PAGES (1280) - -/* The following constant is used in mm/srmmu.c::srmmu_nocache_calcsize() - * to determine the amount of memory that will be reserved as nocache: - * - * 256 pages will be taken as nocache per each - * SRMMU_NOCACHE_ALCRATIO MB of system memory. - * - * limits enforced: nocache minimum = 256 pages - * nocache maximum = 1280 pages - */ -#define SRMMU_NOCACHE_ALCRATIO 64 /* 256 pages per 64MB of system RAM */ - -#define SUN4M_IOBASE_VADDR 0xfd000000 /* Base for mapping pages */ -#define IOBASE_VADDR 0xfe000000 -#define IOBASE_END 0xfe600000 - -#define VMALLOC_START 0xfe600000 - -/* XXX Alter this when I get around to fixing sun4c - Anton */ -#define VMALLOC_END 0xffc00000 - -/* - * On the sun4/4c we need a place - * to reliably map locked down kernel data. This includes the - * task_struct and kernel stack pages of each process plus the - * scsi buffers during dvma IO transfers, also the floppy buffers - * during pseudo dma which runs with traps off (no faults allowed). - * Some quick calculations yield: - * NR_TASKS <512> * (3 * PAGE_SIZE) == 0x600000 - * Subtract this from 0xc00000 and you get 0x927C0 of vm left - * over to map SCSI dvma + floppy pseudo-dma buffers. So be - * careful if you change NR_TASKS or else there won't be enough - * room for it all. - */ -#define SUN4C_LOCK_VADDR 0xff000000 -#define SUN4C_LOCK_END 0xffc00000 - -#define KADB_DEBUGGER_BEGVM 0xffc00000 /* Where kern debugger is in virt-mem */ -#define KADB_DEBUGGER_ENDVM 0xffd00000 -#define DEBUG_FIRSTVADDR KADB_DEBUGGER_BEGVM -#define DEBUG_LASTVADDR KADB_DEBUGGER_ENDVM - -#define LINUX_OPPROM_BEGVM 0xffd00000 -#define LINUX_OPPROM_ENDVM 0xfff00000 - -#define DVMA_VADDR 0xfff00000 /* Base area of the DVMA on suns */ -#define DVMA_END 0xfffc0000 - -#endif /* !(_SPARC_VADDRS_H) */ diff --git a/include/asm-sparc/vfc_ioctls.h b/include/asm-sparc/vfc_ioctls.h deleted file mode 100644 index af8b69007b22..000000000000 --- a/include/asm-sparc/vfc_ioctls.h +++ /dev/null @@ -1,58 +0,0 @@ -/* Copyright (c) 1996 by Manish Vachharajani */ - -#ifndef _LINUX_VFC_IOCTLS_H_ -#define _LINUX_VFC_IOCTLS_H_ - - /* IOCTLs */ -#define VFC_IOCTL(a) (('j' << 8) | a) -#define VFCGCTRL (VFC_IOCTL (0)) /* get vfc attributes */ -#define VFCSCTRL (VFC_IOCTL (1)) /* set vfc attributes */ -#define VFCGVID (VFC_IOCTL (2)) /* get video decoder attributes */ -#define VFCSVID (VFC_IOCTL (3)) /* set video decoder attributes */ -#define VFCHUE (VFC_IOCTL (4)) /* set hue */ -#define VFCPORTCHG (VFC_IOCTL (5)) /* change port */ -#define VFCRDINFO (VFC_IOCTL (6)) /* read info */ - - /* Options for setting the vfc attributes and status */ -#define MEMPRST 0x1 /* reset FIFO ptr. */ -#define CAPTRCMD 0x2 /* start capture and wait */ -#define DIAGMODE 0x3 /* diag mode */ -#define NORMMODE 0x4 /* normal mode */ -#define CAPTRSTR 0x5 /* start capture */ -#define CAPTRWAIT 0x6 /* wait for capture to finish */ - - - /* Options for the decoder */ -#define STD_NTSC 0x1 /* NTSC mode */ -#define STD_PAL 0x2 /* PAL mode */ -#define COLOR_ON 0x3 /* force color ON */ -#define MONO 0x4 /* force color OFF */ - - /* Values returned by ioctl 2 */ - -#define NO_LOCK 1 -#define NTSC_COLOR 2 -#define NTSC_NOCOLOR 3 -#define PAL_COLOR 4 -#define PAL_NOCOLOR 5 - -/* Not too sure what this does yet */ - /* Options for setting Field number */ -#define ODD_FIELD 0x1 -#define EVEN_FIELD 0x0 -#define ACTIVE_ONLY 0x2 -#define NON_ACTIVE 0x0 - -/* Debug options */ -#define VFC_I2C_SEND 0 -#define VFC_I2C_RECV 1 - -struct vfc_debug_inout -{ - unsigned long addr; - unsigned long ret; - unsigned long len; - unsigned char __user *buffer; -}; - -#endif /* _LINUX_VFC_IOCTLS_H_ */ diff --git a/include/asm-sparc/vga.h b/include/asm-sparc/vga.h deleted file mode 100644 index c69d5b2ba19a..000000000000 --- a/include/asm-sparc/vga.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * Access to VGA videoram - * - * (c) 1998 Martin Mares <mj@ucw.cz> - */ - -#ifndef _LINUX_ASM_VGA_H_ -#define _LINUX_ASM_VGA_H_ - -#include <asm/types.h> - -#define VT_BUF_HAVE_RW - -#undef scr_writew -#undef scr_readw - -static inline void scr_writew(u16 val, u16 *addr) -{ - BUG_ON((long) addr >= 0); - - *addr = val; -} - -static inline u16 scr_readw(const u16 *addr) -{ - BUG_ON((long) addr >= 0); - - return *addr; -} - -#define VGA_MAP_MEM(x,s) (x) - -#endif diff --git a/include/asm-sparc/viking.h b/include/asm-sparc/viking.h deleted file mode 100644 index 989930aeb093..000000000000 --- a/include/asm-sparc/viking.h +++ /dev/null @@ -1,253 +0,0 @@ -/* - * viking.h: Defines specific to the GNU/Viking MBUS module. - * This is SRMMU stuff. - * - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - */ -#ifndef _SPARC_VIKING_H -#define _SPARC_VIKING_H - -#include <asm/asi.h> -#include <asm/mxcc.h> -#include <asm/pgtsrmmu.h> - -/* Bits in the SRMMU control register for GNU/Viking modules. - * - * ----------------------------------------------------------- - * |impl-vers| RSV |TC|AC|SP|BM|PC|MBM|SB|IC|DC|PSO|RSV|NF|ME| - * ----------------------------------------------------------- - * 31 24 23-17 16 15 14 13 12 11 10 9 8 7 6-2 1 0 - * - * TC: Tablewalk Cacheable -- 0 = Twalks are not cacheable in E-cache - * 1 = Twalks are cacheable in E-cache - * - * GNU/Viking will only cache tablewalks in the E-cache (mxcc) if present - * and never caches them internally (or so states the docs). Therefore - * for machines lacking an E-cache (ie. in MBUS mode) this bit must - * remain cleared. - * - * AC: Alternate Cacheable -- 0 = Passthru physical accesses not cacheable - * 1 = Passthru physical accesses cacheable - * - * This indicates whether accesses are cacheable when no cachable bit - * is present in the pte when the processor is in boot-mode or the - * access does not need pte's for translation (ie. pass-thru ASI's). - * "Cachable" is only referring to E-cache (if present) and not the - * on chip split I/D caches of the GNU/Viking. - * - * SP: SnooP Enable -- 0 = bus snooping off, 1 = bus snooping on - * - * This enables snooping on the GNU/Viking bus. This must be on - * for the hardware cache consistency mechanisms of the GNU/Viking - * to work at all. On non-mxcc GNU/Viking modules the split I/D - * caches will snoop regardless of whether they are enabled, this - * takes care of the case where the I or D or both caches are turned - * off yet still contain valid data. Note also that this bit does - * not affect GNU/Viking store-buffer snoops, those happen if the - * store-buffer is enabled no matter what. - * - * BM: Boot Mode -- 0 = not in boot mode, 1 = in boot mode - * - * This indicates whether the GNU/Viking is in boot-mode or not, - * if it is then all instruction fetch physical addresses are - * computed as 0xff0000000 + low 28 bits of requested address. - * GNU/Viking boot-mode does not affect data accesses. Also, - * in boot mode instruction accesses bypass the split on chip I/D - * caches, they may be cached by the GNU/MXCC if present and enabled. - * - * MBM: MBus Mode -- 0 = not in MBus mode, 1 = in MBus mode - * - * This indicated the GNU/Viking configuration present. If in - * MBUS mode, the GNU/Viking lacks a GNU/MXCC E-cache. If it is - * not then the GNU/Viking is on a module VBUS connected directly - * to a GNU/MXCC cache controller. The GNU/MXCC can be thus connected - * to either an GNU/MBUS (sun4m) or the packet-switched GNU/XBus (sun4d). - * - * SB: StoreBuffer enable -- 0 = store buffer off, 1 = store buffer on - * - * The GNU/Viking store buffer allows the chip to continue execution - * after a store even if the data cannot be placed in one of the - * caches during that cycle. If disabled, all stores operations - * occur synchronously. - * - * IC: Instruction Cache -- 0 = off, 1 = on - * DC: Data Cache -- 0 = off, 1 = 0n - * - * These bits enable the on-cpu GNU/Viking split I/D caches. Note, - * as mentioned above, these caches will snoop the bus in GNU/MBUS - * configurations even when disabled to avoid data corruption. - * - * NF: No Fault -- 0 = faults generate traps, 1 = faults don't trap - * ME: MMU enable -- 0 = mmu not translating, 1 = mmu translating - * - */ - -#define VIKING_MMUENABLE 0x00000001 -#define VIKING_NOFAULT 0x00000002 -#define VIKING_PSO 0x00000080 -#define VIKING_DCENABLE 0x00000100 /* Enable data cache */ -#define VIKING_ICENABLE 0x00000200 /* Enable instruction cache */ -#define VIKING_SBENABLE 0x00000400 /* Enable store buffer */ -#define VIKING_MMODE 0x00000800 /* MBUS mode */ -#define VIKING_PCENABLE 0x00001000 /* Enable parity checking */ -#define VIKING_BMODE 0x00002000 -#define VIKING_SPENABLE 0x00004000 /* Enable bus cache snooping */ -#define VIKING_ACENABLE 0x00008000 /* Enable alternate caching */ -#define VIKING_TCENABLE 0x00010000 /* Enable table-walks to be cached */ -#define VIKING_DPENABLE 0x00040000 /* Enable the data prefetcher */ - -/* - * GNU/Viking Breakpoint Action Register fields. - */ -#define VIKING_ACTION_MIX 0x00001000 /* Enable multiple instructions */ - -/* - * GNU/Viking Cache Tags. - */ -#define VIKING_PTAG_VALID 0x01000000 /* Cache block is valid */ -#define VIKING_PTAG_DIRTY 0x00010000 /* Block has been modified */ -#define VIKING_PTAG_SHARED 0x00000100 /* Shared with some other cache */ - -#ifndef __ASSEMBLY__ - -static inline void viking_flush_icache(void) -{ - __asm__ __volatile__("sta %%g0, [%%g0] %0\n\t" - : /* no outputs */ - : "i" (ASI_M_IC_FLCLEAR) - : "memory"); -} - -static inline void viking_flush_dcache(void) -{ - __asm__ __volatile__("sta %%g0, [%%g0] %0\n\t" - : /* no outputs */ - : "i" (ASI_M_DC_FLCLEAR) - : "memory"); -} - -static inline void viking_unlock_icache(void) -{ - __asm__ __volatile__("sta %%g0, [%0] %1\n\t" - : /* no outputs */ - : "r" (0x80000000), "i" (ASI_M_IC_FLCLEAR) - : "memory"); -} - -static inline void viking_unlock_dcache(void) -{ - __asm__ __volatile__("sta %%g0, [%0] %1\n\t" - : /* no outputs */ - : "r" (0x80000000), "i" (ASI_M_DC_FLCLEAR) - : "memory"); -} - -static inline void viking_set_bpreg(unsigned long regval) -{ - __asm__ __volatile__("sta %0, [%%g0] %1\n\t" - : /* no outputs */ - : "r" (regval), "i" (ASI_M_ACTION) - : "memory"); -} - -static inline unsigned long viking_get_bpreg(void) -{ - unsigned long regval; - - __asm__ __volatile__("lda [%%g0] %1, %0\n\t" - : "=r" (regval) - : "i" (ASI_M_ACTION)); - return regval; -} - -static inline void viking_get_dcache_ptag(int set, int block, - unsigned long *data) -{ - unsigned long ptag = ((set & 0x7f) << 5) | ((block & 0x3) << 26) | - 0x80000000; - unsigned long info, page; - - __asm__ __volatile__ ("ldda [%2] %3, %%g2\n\t" - "or %%g0, %%g2, %0\n\t" - "or %%g0, %%g3, %1\n\t" - : "=r" (info), "=r" (page) - : "r" (ptag), "i" (ASI_M_DATAC_TAG) - : "g2", "g3"); - data[0] = info; - data[1] = page; -} - -static inline void viking_mxcc_turn_off_parity(unsigned long *mregp, - unsigned long *mxcc_cregp) -{ - unsigned long mreg = *mregp; - unsigned long mxcc_creg = *mxcc_cregp; - - mreg &= ~(VIKING_PCENABLE); - mxcc_creg &= ~(MXCC_CTL_PARE); - - __asm__ __volatile__ ("set 1f, %%g2\n\t" - "andcc %%g2, 4, %%g0\n\t" - "bne 2f\n\t" - " nop\n" - "1:\n\t" - "sta %0, [%%g0] %3\n\t" - "sta %1, [%2] %4\n\t" - "b 1f\n\t" - " nop\n\t" - "nop\n" - "2:\n\t" - "sta %0, [%%g0] %3\n\t" - "sta %1, [%2] %4\n" - "1:\n\t" - : /* no output */ - : "r" (mreg), "r" (mxcc_creg), - "r" (MXCC_CREG), "i" (ASI_M_MMUREGS), - "i" (ASI_M_MXCC) - : "g2", "memory", "cc"); - *mregp = mreg; - *mxcc_cregp = mxcc_creg; -} - -static inline unsigned long viking_hwprobe(unsigned long vaddr) -{ - unsigned long val; - - vaddr &= PAGE_MASK; - /* Probe all MMU entries. */ - __asm__ __volatile__("lda [%1] %2, %0\n\t" - : "=r" (val) - : "r" (vaddr | 0x400), "i" (ASI_M_FLUSH_PROBE)); - if (!val) - return 0; - - /* Probe region. */ - __asm__ __volatile__("lda [%1] %2, %0\n\t" - : "=r" (val) - : "r" (vaddr | 0x200), "i" (ASI_M_FLUSH_PROBE)); - if ((val & SRMMU_ET_MASK) == SRMMU_ET_PTE) { - vaddr &= ~SRMMU_PGDIR_MASK; - vaddr >>= PAGE_SHIFT; - return val | (vaddr << 8); - } - - /* Probe segment. */ - __asm__ __volatile__("lda [%1] %2, %0\n\t" - : "=r" (val) - : "r" (vaddr | 0x100), "i" (ASI_M_FLUSH_PROBE)); - if ((val & SRMMU_ET_MASK) == SRMMU_ET_PTE) { - vaddr &= ~SRMMU_REAL_PMD_MASK; - vaddr >>= PAGE_SHIFT; - return val | (vaddr << 8); - } - - /* Probe page. */ - __asm__ __volatile__("lda [%1] %2, %0\n\t" - : "=r" (val) - : "r" (vaddr), "i" (ASI_M_FLUSH_PROBE)); - return val; -} - -#endif /* !__ASSEMBLY__ */ - -#endif /* !(_SPARC_VIKING_H) */ diff --git a/include/asm-sparc/winmacro.h b/include/asm-sparc/winmacro.h deleted file mode 100644 index 5b0a06dc3bcb..000000000000 --- a/include/asm-sparc/winmacro.h +++ /dev/null @@ -1,135 +0,0 @@ -/* - * winmacro.h: Window loading-unloading macros. - * - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - */ - -#ifndef _SPARC_WINMACRO_H -#define _SPARC_WINMACRO_H - -#include <asm/ptrace.h> - -/* Store the register window onto the 8-byte aligned area starting - * at %reg. It might be %sp, it might not, we don't care. - */ -#define STORE_WINDOW(reg) \ - std %l0, [%reg + RW_L0]; \ - std %l2, [%reg + RW_L2]; \ - std %l4, [%reg + RW_L4]; \ - std %l6, [%reg + RW_L6]; \ - std %i0, [%reg + RW_I0]; \ - std %i2, [%reg + RW_I2]; \ - std %i4, [%reg + RW_I4]; \ - std %i6, [%reg + RW_I6]; - -/* Load a register window from the area beginning at %reg. */ -#define LOAD_WINDOW(reg) \ - ldd [%reg + RW_L0], %l0; \ - ldd [%reg + RW_L2], %l2; \ - ldd [%reg + RW_L4], %l4; \ - ldd [%reg + RW_L6], %l6; \ - ldd [%reg + RW_I0], %i0; \ - ldd [%reg + RW_I2], %i2; \ - ldd [%reg + RW_I4], %i4; \ - ldd [%reg + RW_I6], %i6; - -/* Loading and storing struct pt_reg trap frames. */ -#define LOAD_PT_INS(base_reg) \ - ldd [%base_reg + STACKFRAME_SZ + PT_I0], %i0; \ - ldd [%base_reg + STACKFRAME_SZ + PT_I2], %i2; \ - ldd [%base_reg + STACKFRAME_SZ + PT_I4], %i4; \ - ldd [%base_reg + STACKFRAME_SZ + PT_I6], %i6; - -#define LOAD_PT_GLOBALS(base_reg) \ - ld [%base_reg + STACKFRAME_SZ + PT_G1], %g1; \ - ldd [%base_reg + STACKFRAME_SZ + PT_G2], %g2; \ - ldd [%base_reg + STACKFRAME_SZ + PT_G4], %g4; \ - ldd [%base_reg + STACKFRAME_SZ + PT_G6], %g6; - -#define LOAD_PT_YREG(base_reg, scratch) \ - ld [%base_reg + STACKFRAME_SZ + PT_Y], %scratch; \ - wr %scratch, 0x0, %y; - -#define LOAD_PT_PRIV(base_reg, pt_psr, pt_pc, pt_npc) \ - ld [%base_reg + STACKFRAME_SZ + PT_PSR], %pt_psr; \ - ld [%base_reg + STACKFRAME_SZ + PT_PC], %pt_pc; \ - ld [%base_reg + STACKFRAME_SZ + PT_NPC], %pt_npc; - -#define LOAD_PT_ALL(base_reg, pt_psr, pt_pc, pt_npc, scratch) \ - LOAD_PT_YREG(base_reg, scratch) \ - LOAD_PT_INS(base_reg) \ - LOAD_PT_GLOBALS(base_reg) \ - LOAD_PT_PRIV(base_reg, pt_psr, pt_pc, pt_npc) - -#define STORE_PT_INS(base_reg) \ - std %i0, [%base_reg + STACKFRAME_SZ + PT_I0]; \ - std %i2, [%base_reg + STACKFRAME_SZ + PT_I2]; \ - std %i4, [%base_reg + STACKFRAME_SZ + PT_I4]; \ - std %i6, [%base_reg + STACKFRAME_SZ + PT_I6]; - -#define STORE_PT_GLOBALS(base_reg) \ - st %g1, [%base_reg + STACKFRAME_SZ + PT_G1]; \ - std %g2, [%base_reg + STACKFRAME_SZ + PT_G2]; \ - std %g4, [%base_reg + STACKFRAME_SZ + PT_G4]; \ - std %g6, [%base_reg + STACKFRAME_SZ + PT_G6]; - -#define STORE_PT_YREG(base_reg, scratch) \ - rd %y, %scratch; \ - st %scratch, [%base_reg + STACKFRAME_SZ + PT_Y]; - -#define STORE_PT_PRIV(base_reg, pt_psr, pt_pc, pt_npc) \ - st %pt_psr, [%base_reg + STACKFRAME_SZ + PT_PSR]; \ - st %pt_pc, [%base_reg + STACKFRAME_SZ + PT_PC]; \ - st %pt_npc, [%base_reg + STACKFRAME_SZ + PT_NPC]; - -#define STORE_PT_ALL(base_reg, reg_psr, reg_pc, reg_npc, g_scratch) \ - STORE_PT_PRIV(base_reg, reg_psr, reg_pc, reg_npc) \ - STORE_PT_GLOBALS(base_reg) \ - STORE_PT_YREG(base_reg, g_scratch) \ - STORE_PT_INS(base_reg) - -#define SAVE_BOLIXED_USER_STACK(cur_reg, scratch) \ - ld [%cur_reg + TI_W_SAVED], %scratch; \ - sll %scratch, 2, %scratch; \ - add %scratch, %cur_reg, %scratch; \ - st %sp, [%scratch + TI_RWIN_SPTRS]; \ - sub %scratch, %cur_reg, %scratch; \ - sll %scratch, 4, %scratch; \ - add %scratch, %cur_reg, %scratch; \ - STORE_WINDOW(scratch + TI_REG_WINDOW); \ - sub %scratch, %cur_reg, %scratch; \ - srl %scratch, 6, %scratch; \ - add %scratch, 1, %scratch; \ - st %scratch, [%cur_reg + TI_W_SAVED]; - -#ifdef CONFIG_SMP -#define LOAD_CURRENT4M(dest_reg, idreg) \ - rd %tbr, %idreg; \ - sethi %hi(current_set), %dest_reg; \ - srl %idreg, 10, %idreg; \ - or %dest_reg, %lo(current_set), %dest_reg; \ - and %idreg, 0xc, %idreg; \ - ld [%idreg + %dest_reg], %dest_reg; - -#define LOAD_CURRENT4D(dest_reg, idreg) \ - lda [%g0] ASI_M_VIKING_TMP1, %idreg; \ - sethi %hi(C_LABEL(current_set)), %dest_reg; \ - sll %idreg, 2, %idreg; \ - or %dest_reg, %lo(C_LABEL(current_set)), %dest_reg; \ - ld [%idreg + %dest_reg], %dest_reg; - -/* Blackbox - take care with this... - check smp4m and smp4d before changing this. */ -#define LOAD_CURRENT(dest_reg, idreg) \ - sethi %hi(___b_load_current), %idreg; \ - sethi %hi(current_set), %dest_reg; \ - sethi %hi(boot_cpu_id4), %idreg; \ - or %dest_reg, %lo(current_set), %dest_reg; \ - ldub [%idreg + %lo(boot_cpu_id4)], %idreg; \ - ld [%idreg + %dest_reg], %dest_reg; -#else -#define LOAD_CURRENT(dest_reg, idreg) \ - sethi %hi(current_set), %idreg; \ - ld [%idreg + %lo(current_set)], %dest_reg; -#endif - -#endif /* !(_SPARC_WINMACRO_H) */ diff --git a/include/asm-sparc/xor.h b/include/asm-sparc/xor.h deleted file mode 100644 index f34b2cfa8206..000000000000 --- a/include/asm-sparc/xor.h +++ /dev/null @@ -1,269 +0,0 @@ -/* - * include/asm-sparc/xor.h - * - * Optimized RAID-5 checksumming functions for 32-bit Sparc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * You should have received a copy of the GNU General Public License - * (for example /usr/src/linux/COPYING); if not, write to the Free - * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -/* - * High speed xor_block operation for RAID4/5 utilizing the - * ldd/std SPARC instructions. - * - * Copyright (C) 1999 Jakub Jelinek (jj@ultra.linux.cz) - */ - -static void -sparc_2(unsigned long bytes, unsigned long *p1, unsigned long *p2) -{ - int lines = bytes / (sizeof (long)) / 8; - - do { - __asm__ __volatile__( - "ldd [%0 + 0x00], %%g2\n\t" - "ldd [%0 + 0x08], %%g4\n\t" - "ldd [%0 + 0x10], %%o0\n\t" - "ldd [%0 + 0x18], %%o2\n\t" - "ldd [%1 + 0x00], %%o4\n\t" - "ldd [%1 + 0x08], %%l0\n\t" - "ldd [%1 + 0x10], %%l2\n\t" - "ldd [%1 + 0x18], %%l4\n\t" - "xor %%g2, %%o4, %%g2\n\t" - "xor %%g3, %%o5, %%g3\n\t" - "xor %%g4, %%l0, %%g4\n\t" - "xor %%g5, %%l1, %%g5\n\t" - "xor %%o0, %%l2, %%o0\n\t" - "xor %%o1, %%l3, %%o1\n\t" - "xor %%o2, %%l4, %%o2\n\t" - "xor %%o3, %%l5, %%o3\n\t" - "std %%g2, [%0 + 0x00]\n\t" - "std %%g4, [%0 + 0x08]\n\t" - "std %%o0, [%0 + 0x10]\n\t" - "std %%o2, [%0 + 0x18]\n" - : - : "r" (p1), "r" (p2) - : "g2", "g3", "g4", "g5", - "o0", "o1", "o2", "o3", "o4", "o5", - "l0", "l1", "l2", "l3", "l4", "l5"); - p1 += 8; - p2 += 8; - } while (--lines > 0); -} - -static void -sparc_3(unsigned long bytes, unsigned long *p1, unsigned long *p2, - unsigned long *p3) -{ - int lines = bytes / (sizeof (long)) / 8; - - do { - __asm__ __volatile__( - "ldd [%0 + 0x00], %%g2\n\t" - "ldd [%0 + 0x08], %%g4\n\t" - "ldd [%0 + 0x10], %%o0\n\t" - "ldd [%0 + 0x18], %%o2\n\t" - "ldd [%1 + 0x00], %%o4\n\t" - "ldd [%1 + 0x08], %%l0\n\t" - "ldd [%1 + 0x10], %%l2\n\t" - "ldd [%1 + 0x18], %%l4\n\t" - "xor %%g2, %%o4, %%g2\n\t" - "xor %%g3, %%o5, %%g3\n\t" - "ldd [%2 + 0x00], %%o4\n\t" - "xor %%g4, %%l0, %%g4\n\t" - "xor %%g5, %%l1, %%g5\n\t" - "ldd [%2 + 0x08], %%l0\n\t" - "xor %%o0, %%l2, %%o0\n\t" - "xor %%o1, %%l3, %%o1\n\t" - "ldd [%2 + 0x10], %%l2\n\t" - "xor %%o2, %%l4, %%o2\n\t" - "xor %%o3, %%l5, %%o3\n\t" - "ldd [%2 + 0x18], %%l4\n\t" - "xor %%g2, %%o4, %%g2\n\t" - "xor %%g3, %%o5, %%g3\n\t" - "xor %%g4, %%l0, %%g4\n\t" - "xor %%g5, %%l1, %%g5\n\t" - "xor %%o0, %%l2, %%o0\n\t" - "xor %%o1, %%l3, %%o1\n\t" - "xor %%o2, %%l4, %%o2\n\t" - "xor %%o3, %%l5, %%o3\n\t" - "std %%g2, [%0 + 0x00]\n\t" - "std %%g4, [%0 + 0x08]\n\t" - "std %%o0, [%0 + 0x10]\n\t" - "std %%o2, [%0 + 0x18]\n" - : - : "r" (p1), "r" (p2), "r" (p3) - : "g2", "g3", "g4", "g5", - "o0", "o1", "o2", "o3", "o4", "o5", - "l0", "l1", "l2", "l3", "l4", "l5"); - p1 += 8; - p2 += 8; - p3 += 8; - } while (--lines > 0); -} - -static void -sparc_4(unsigned long bytes, unsigned long *p1, unsigned long *p2, - unsigned long *p3, unsigned long *p4) -{ - int lines = bytes / (sizeof (long)) / 8; - - do { - __asm__ __volatile__( - "ldd [%0 + 0x00], %%g2\n\t" - "ldd [%0 + 0x08], %%g4\n\t" - "ldd [%0 + 0x10], %%o0\n\t" - "ldd [%0 + 0x18], %%o2\n\t" - "ldd [%1 + 0x00], %%o4\n\t" - "ldd [%1 + 0x08], %%l0\n\t" - "ldd [%1 + 0x10], %%l2\n\t" - "ldd [%1 + 0x18], %%l4\n\t" - "xor %%g2, %%o4, %%g2\n\t" - "xor %%g3, %%o5, %%g3\n\t" - "ldd [%2 + 0x00], %%o4\n\t" - "xor %%g4, %%l0, %%g4\n\t" - "xor %%g5, %%l1, %%g5\n\t" - "ldd [%2 + 0x08], %%l0\n\t" - "xor %%o0, %%l2, %%o0\n\t" - "xor %%o1, %%l3, %%o1\n\t" - "ldd [%2 + 0x10], %%l2\n\t" - "xor %%o2, %%l4, %%o2\n\t" - "xor %%o3, %%l5, %%o3\n\t" - "ldd [%2 + 0x18], %%l4\n\t" - "xor %%g2, %%o4, %%g2\n\t" - "xor %%g3, %%o5, %%g3\n\t" - "ldd [%3 + 0x00], %%o4\n\t" - "xor %%g4, %%l0, %%g4\n\t" - "xor %%g5, %%l1, %%g5\n\t" - "ldd [%3 + 0x08], %%l0\n\t" - "xor %%o0, %%l2, %%o0\n\t" - "xor %%o1, %%l3, %%o1\n\t" - "ldd [%3 + 0x10], %%l2\n\t" - "xor %%o2, %%l4, %%o2\n\t" - "xor %%o3, %%l5, %%o3\n\t" - "ldd [%3 + 0x18], %%l4\n\t" - "xor %%g2, %%o4, %%g2\n\t" - "xor %%g3, %%o5, %%g3\n\t" - "xor %%g4, %%l0, %%g4\n\t" - "xor %%g5, %%l1, %%g5\n\t" - "xor %%o0, %%l2, %%o0\n\t" - "xor %%o1, %%l3, %%o1\n\t" - "xor %%o2, %%l4, %%o2\n\t" - "xor %%o3, %%l5, %%o3\n\t" - "std %%g2, [%0 + 0x00]\n\t" - "std %%g4, [%0 + 0x08]\n\t" - "std %%o0, [%0 + 0x10]\n\t" - "std %%o2, [%0 + 0x18]\n" - : - : "r" (p1), "r" (p2), "r" (p3), "r" (p4) - : "g2", "g3", "g4", "g5", - "o0", "o1", "o2", "o3", "o4", "o5", - "l0", "l1", "l2", "l3", "l4", "l5"); - p1 += 8; - p2 += 8; - p3 += 8; - p4 += 8; - } while (--lines > 0); -} - -static void -sparc_5(unsigned long bytes, unsigned long *p1, unsigned long *p2, - unsigned long *p3, unsigned long *p4, unsigned long *p5) -{ - int lines = bytes / (sizeof (long)) / 8; - - do { - __asm__ __volatile__( - "ldd [%0 + 0x00], %%g2\n\t" - "ldd [%0 + 0x08], %%g4\n\t" - "ldd [%0 + 0x10], %%o0\n\t" - "ldd [%0 + 0x18], %%o2\n\t" - "ldd [%1 + 0x00], %%o4\n\t" - "ldd [%1 + 0x08], %%l0\n\t" - "ldd [%1 + 0x10], %%l2\n\t" - "ldd [%1 + 0x18], %%l4\n\t" - "xor %%g2, %%o4, %%g2\n\t" - "xor %%g3, %%o5, %%g3\n\t" - "ldd [%2 + 0x00], %%o4\n\t" - "xor %%g4, %%l0, %%g4\n\t" - "xor %%g5, %%l1, %%g5\n\t" - "ldd [%2 + 0x08], %%l0\n\t" - "xor %%o0, %%l2, %%o0\n\t" - "xor %%o1, %%l3, %%o1\n\t" - "ldd [%2 + 0x10], %%l2\n\t" - "xor %%o2, %%l4, %%o2\n\t" - "xor %%o3, %%l5, %%o3\n\t" - "ldd [%2 + 0x18], %%l4\n\t" - "xor %%g2, %%o4, %%g2\n\t" - "xor %%g3, %%o5, %%g3\n\t" - "ldd [%3 + 0x00], %%o4\n\t" - "xor %%g4, %%l0, %%g4\n\t" - "xor %%g5, %%l1, %%g5\n\t" - "ldd [%3 + 0x08], %%l0\n\t" - "xor %%o0, %%l2, %%o0\n\t" - "xor %%o1, %%l3, %%o1\n\t" - "ldd [%3 + 0x10], %%l2\n\t" - "xor %%o2, %%l4, %%o2\n\t" - "xor %%o3, %%l5, %%o3\n\t" - "ldd [%3 + 0x18], %%l4\n\t" - "xor %%g2, %%o4, %%g2\n\t" - "xor %%g3, %%o5, %%g3\n\t" - "ldd [%4 + 0x00], %%o4\n\t" - "xor %%g4, %%l0, %%g4\n\t" - "xor %%g5, %%l1, %%g5\n\t" - "ldd [%4 + 0x08], %%l0\n\t" - "xor %%o0, %%l2, %%o0\n\t" - "xor %%o1, %%l3, %%o1\n\t" - "ldd [%4 + 0x10], %%l2\n\t" - "xor %%o2, %%l4, %%o2\n\t" - "xor %%o3, %%l5, %%o3\n\t" - "ldd [%4 + 0x18], %%l4\n\t" - "xor %%g2, %%o4, %%g2\n\t" - "xor %%g3, %%o5, %%g3\n\t" - "xor %%g4, %%l0, %%g4\n\t" - "xor %%g5, %%l1, %%g5\n\t" - "xor %%o0, %%l2, %%o0\n\t" - "xor %%o1, %%l3, %%o1\n\t" - "xor %%o2, %%l4, %%o2\n\t" - "xor %%o3, %%l5, %%o3\n\t" - "std %%g2, [%0 + 0x00]\n\t" - "std %%g4, [%0 + 0x08]\n\t" - "std %%o0, [%0 + 0x10]\n\t" - "std %%o2, [%0 + 0x18]\n" - : - : "r" (p1), "r" (p2), "r" (p3), "r" (p4), "r" (p5) - : "g2", "g3", "g4", "g5", - "o0", "o1", "o2", "o3", "o4", "o5", - "l0", "l1", "l2", "l3", "l4", "l5"); - p1 += 8; - p2 += 8; - p3 += 8; - p4 += 8; - p5 += 8; - } while (--lines > 0); -} - -static struct xor_block_template xor_block_SPARC = { - .name = "SPARC", - .do_2 = sparc_2, - .do_3 = sparc_3, - .do_4 = sparc_4, - .do_5 = sparc_5, -}; - -/* For grins, also test the generic routines. */ -#include <asm-generic/xor.h> - -#undef XOR_TRY_TEMPLATES -#define XOR_TRY_TEMPLATES \ - do { \ - xor_speed(&xor_block_8regs); \ - xor_speed(&xor_block_32regs); \ - xor_speed(&xor_block_SPARC); \ - } while (0) |
