diff options
Diffstat (limited to 'drivers/usb/misc/sisusbvga/sisusb_con.c')
| -rw-r--r-- | drivers/usb/misc/sisusbvga/sisusb_con.c | 1658 |
1 files changed, 1658 insertions, 0 deletions
diff --git a/drivers/usb/misc/sisusbvga/sisusb_con.c b/drivers/usb/misc/sisusbvga/sisusb_con.c new file mode 100644 index 000000000000..24584463553d --- /dev/null +++ b/drivers/usb/misc/sisusbvga/sisusb_con.c @@ -0,0 +1,1658 @@ +/* + * sisusb - usb kernel driver for SiS315(E) based USB2VGA dongles + * + * VGA text mode console part + * + * Copyright (C) 2005 by Thomas Winischhofer, Vienna, Austria + * + * If distributed as part of the Linux kernel, this code is licensed under the + * terms of the GPL v2. + * + * Otherwise, the following license terms apply: + * + * * Redistribution and use in source and binary forms, with or without + * * modification, are permitted provided that the following conditions + * * are met: + * * 1) Redistributions of source code must retain the above copyright + * * notice, this list of conditions and the following disclaimer. + * * 2) Redistributions in binary form must reproduce the above copyright + * * notice, this list of conditions and the following disclaimer in the + * * documentation and/or other materials provided with the distribution. + * * 3) The name of the author may not be used to endorse or promote products + * * derived from this software without specific psisusbr written permission. + * * + * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESSED OR + * * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * Author: Thomas Winischhofer <thomas@winischhofer.net> + * + * Portions based on vgacon.c which are + * Created 28 Sep 1997 by Geert Uytterhoeven + * Rewritten by Martin Mares <mj@ucw.cz>, July 1998 + * based on code Copyright (C) 1991, 1992 Linus Torvalds + * 1995 Jay Estabrook + * + * A note on using in_atomic() in here: We can't handle console + * calls from non-schedulable context due to our USB-dependend + * nature. For now, this driver just ignores any calls if it + * detects this state. + * + */ + +#include <linux/config.h> +#include <linux/version.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/fs.h> +#include <linux/tty.h> +#include <linux/console.h> +#include <linux/string.h> +#include <linux/kd.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/vt_kern.h> +#include <linux/selection.h> +#include <linux/spinlock.h> +#include <linux/kref.h> +#include <linux/smp_lock.h> +#include <linux/ioport.h> +#include <linux/interrupt.h> +#include <linux/vmalloc.h> + +#include "sisusb.h" + +#ifdef INCL_SISUSB_CON +extern int sisusb_setreg(struct sisusb_usb_data *, int, u8); +extern int sisusb_getreg(struct sisusb_usb_data *, int, u8 *); +extern int sisusb_setidxreg(struct sisusb_usb_data *, int, u8, u8); +extern int sisusb_getidxreg(struct sisusb_usb_data *, int, u8, u8 *); +extern int sisusb_setidxregor(struct sisusb_usb_data *, int, u8, u8); +extern int sisusb_setidxregand(struct sisusb_usb_data *, int, u8, u8); +extern int sisusb_setidxregandor(struct sisusb_usb_data *, int, u8, u8, u8); + +extern int sisusb_writeb(struct sisusb_usb_data *sisusb, u32 adr, u8 data); +extern int sisusb_readb(struct sisusb_usb_data *sisusb, u32 adr, u8 *data); +extern int sisusb_writew(struct sisusb_usb_data *sisusb, u32 adr, u16 data); +extern int sisusb_readw(struct sisusb_usb_data *sisusb, u32 adr, u16 *data); +extern int sisusb_copy_memory(struct sisusb_usb_data *sisusb, char *src, + u32 dest, int length, size_t *bytes_written); + +extern void sisusb_delete(struct kref *kref); +extern int sisusb_reset_text_mode(struct sisusb_usb_data *sisusb, int init); + +extern int SiSUSBSetMode(struct SiS_Private *SiS_Pr, unsigned short ModeNo); + +#define sisusbcon_writew(val, addr) (*(addr) = (val)) +#define sisusbcon_readw(addr) (*(addr)) +#define sisusbcon_memmovew(d, s, c) memmove(d, s, c) +#define sisusbcon_memcpyw(d, s, c) memcpy(d, s, c) + +/* vc_data -> sisusb conversion table */ +static struct sisusb_usb_data *mysisusbs[MAX_NR_CONSOLES]; + +/* Forward declaration */ +static const struct consw sisusb_con; + +extern struct semaphore disconnect_sem; + +static inline void +sisusbcon_memsetw(u16 *s, u16 c, unsigned int count) +{ + count /= 2; + while (count--) + sisusbcon_writew(c, s++); +} + +static inline void +sisusb_initialize(struct sisusb_usb_data *sisusb) +{ + /* Reset cursor and start address */ + if (sisusb_setidxreg(sisusb, SISCR, 0x0c, 0x00)) + return; + if (sisusb_setidxreg(sisusb, SISCR, 0x0d, 0x00)) + return; + if (sisusb_setidxreg(sisusb, SISCR, 0x0e, 0x00)) + return; + sisusb_setidxreg(sisusb, SISCR, 0x0f, 0x00); +} + +static inline void +sisusbcon_set_start_address(struct sisusb_usb_data *sisusb, struct vc_data *c) +{ + sisusb->cur_start_addr = (c->vc_visible_origin - sisusb->scrbuf) / 2; + + sisusb_setidxreg(sisusb, SISCR, 0x0c, (sisusb->cur_start_addr >> 8)); + sisusb_setidxreg(sisusb, SISCR, 0x0d, (sisusb->cur_start_addr & 0xff)); +} + +void +sisusb_set_cursor(struct sisusb_usb_data *sisusb, unsigned int location) +{ + if (sisusb->sisusb_cursor_loc == location) + return; + + sisusb->sisusb_cursor_loc = location; + + /* Hardware bug: Text cursor appears twice or not at all + * at some positions. Work around it with the cursor skew + * bits. + */ + + if ((location & 0x0007) == 0x0007) { + sisusb->bad_cursor_pos = 1; + location--; + if (sisusb_setidxregandor(sisusb, SISCR, 0x0b, 0x1f, 0x20)) + return; + } else if (sisusb->bad_cursor_pos) { + if (sisusb_setidxregand(sisusb, SISCR, 0x0b, 0x1f)) + return; + sisusb->bad_cursor_pos = 0; + } + + if (sisusb_setidxreg(sisusb, SISCR, 0x0e, (location >> 8))) + return; + sisusb_setidxreg(sisusb, SISCR, 0x0f, (location & 0xff)); +} + +static inline struct sisusb_usb_data * +sisusb_get_sisusb(unsigned short console) +{ + return mysisusbs[console]; +} + +static inline int +sisusb_sisusb_valid(struct sisusb_usb_data *sisusb) +{ + if (!sisusb->present || !sisusb->ready || !sisusb->sisusb_dev) + return 0; + + return 1; +} + +static struct sisusb_usb_data * +sisusb_get_sisusb_lock_and_check(unsigned short console) +{ + struct sisusb_usb_data *sisusb; + + /* We can't handle console calls in non-schedulable + * context due to our locks and the USB transport. + * So we simply ignore them. This should only affect + * some calls to printk. + */ + if (in_atomic()) + return NULL; + + if (!(sisusb = sisusb_get_sisusb(console))) + return NULL; + + down(&sisusb->lock); + + if (!sisusb_sisusb_valid(sisusb) || + !sisusb->havethisconsole[console]) { + up(&sisusb->lock); + return NULL; + } + + return sisusb; +} + +static int +sisusb_is_inactive(struct vc_data *c, struct sisusb_usb_data *sisusb) +{ + if (sisusb->is_gfx || + sisusb->textmodedestroyed || + c->vc_mode != KD_TEXT) + return 1; + + return 0; +} + +/* con_startup console interface routine */ +static const char * +sisusbcon_startup(void) +{ + return "SISUSBCON"; +} + +/* con_init console interface routine */ +static void +sisusbcon_init(struct vc_data *c, int init) +{ + struct sisusb_usb_data *sisusb; + int cols, rows; + + /* This is called by take_over_console(), + * ie by us/under our control. It is + * only called after text mode and fonts + * are set up/restored. + */ + + down(&disconnect_sem); + + if (!(sisusb = sisusb_get_sisusb(c->vc_num))) { + up(&disconnect_sem); + return; + } + + down(&sisusb->lock); + + if (!sisusb_sisusb_valid(sisusb)) { + up(&sisusb->lock); + up(&disconnect_sem); + return; + } + + c->vc_can_do_color = 1; + + c->vc_complement_mask = 0x7700; + + c->vc_hi_font_mask = sisusb->current_font_512 ? 0x0800 : 0; + + sisusb->haveconsole = 1; + + sisusb->havethisconsole[c->vc_num] = 1; + + /* We only support 640x400 */ + c->vc_scan_lines = 400; + + c->vc_font.height = sisusb->current_font_height; + + /* We only support width = 8 */ + cols = 80; + rows = c->vc_scan_lines / c->vc_font.height; + + /* Increment usage count for our sisusb. + * Doing so saves us from upping/downing + * the disconnect semaphore; we can't + * lose our sisusb until this is undone + * in con_deinit. For all other console + * interface functions, it suffices to + * use sisusb->lock and do a quick check + * of sisusb for device disconnection. + */ + kref_get(&sisusb->kref); + + if (!*c->vc_uni_pagedir_loc) + con_set_default_unimap(c); + + up(&sisusb->lock); + + up(&disconnect_sem); + + if (init) { + c->vc_cols = cols; + c->vc_rows = rows; + } else + vc_resize(c, cols, rows); +} + +/* con_deinit console interface routine */ +static void +sisusbcon_deinit(struct vc_data *c) +{ + struct sisusb_usb_data *sisusb; + int i; + + /* This is called by take_over_console() + * and others, ie not under our control. + */ + + down(&disconnect_sem); + + if (!(sisusb = sisusb_get_sisusb(c->vc_num))) { + up(&disconnect_sem); + return; + } + + down(&sisusb->lock); + + /* Clear ourselves in mysisusbs */ + mysisusbs[c->vc_num] = NULL; + + sisusb->havethisconsole[c->vc_num] = 0; + + /* Free our font buffer if all consoles are gone */ + if (sisusb->font_backup) { + for(i = 0; i < MAX_NR_CONSOLES; i++) { + if (sisusb->havethisconsole[c->vc_num]) + break; + } + if (i == MAX_NR_CONSOLES) { + vfree(sisusb->font_backup); + sisusb->font_backup = NULL; + } + } + + up(&sisusb->lock); + + /* decrement the usage count on our sisusb */ + kref_put(&sisusb->kref, sisusb_delete); + + up(&disconnect_sem); +} + +/* interface routine */ +static u8 +sisusbcon_build_attr(struct vc_data *c, u8 color, u8 intensity, + u8 blink, u8 underline, u8 reverse) +{ + u8 attr = color; + + if (underline) + attr = (attr & 0xf0) | c->vc_ulcolor; + else if (intensity == 0) + attr = (attr & 0xf0) | c->vc_halfcolor; + + if (reverse) + attr = ((attr) & 0x88) | + ((((attr) >> 4) | + ((attr) << 4)) & 0x77); + + if (blink) + attr ^= 0x80; + + if (intensity == 2) + attr ^= 0x08; + + return attr; +} + +/* Interface routine */ +static void +sisusbcon_invert_region(struct vc_data *vc, u16 *p, int count) +{ + /* Invert a region. This is called with a pointer + * to the console's internal screen buffer. So we + * simply do the inversion there and rely on + * a call to putc(s) to update the real screen. + */ + + while (count--) { + u16 a = sisusbcon_readw(p); + + a = ((a) & 0x88ff) | + (((a) & 0x7000) >> 4) | + (((a) & 0x0700) << 4); + + sisusbcon_writew(a, p++); + } +} + +#define SISUSB_VADDR(x,y) \ + ((u16 *)c->vc_origin + \ + (y) * sisusb->sisusb_num_columns + \ + (x)) + +#define SISUSB_HADDR(x,y) \ + ((u16 *)(sisusb->vrambase + (c->vc_origin - sisusb->scrbuf)) + \ + (y) * sisusb->sisusb_num_columns + \ + (x)) + +/* Interface routine */ +static void +sisusbcon_putc(struct vc_data *c, int ch, int y, int x) +{ + struct sisusb_usb_data *sisusb; + ssize_t written; + + if (!(sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num))) + return; + + /* sisusb->lock is down */ + + /* Don't need to put the character into buffer ourselves, + * because the vt does this BEFORE calling us. + */ +#if 0 + sisusbcon_writew(ch, SISUSB_VADDR(x, y)); +#endif + + if (sisusb_is_inactive(c, sisusb)) { + up(&sisusb->lock); + return; + } + + + sisusb_copy_memory(sisusb, (char *)SISUSB_VADDR(x, y), + (u32)SISUSB_HADDR(x, y), 2, &written); + + up(&sisusb->lock); +} + +/* Interface routine */ +static void +sisusbcon_putcs(struct vc_data *c, const unsigned short *s, + int count, int y, int x) +{ + struct sisusb_usb_data *sisusb; + ssize_t written; + u16 *dest; + int i; + + if (!(sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num))) + return; + + /* sisusb->lock is down */ + + /* Need to put the characters into the buffer ourselves, + * because the vt does this AFTER calling us. + */ + + dest = SISUSB_VADDR(x, y); + + for (i = count; i > 0; i--) + sisusbcon_writew(sisusbcon_readw(s++), dest++); + + if (sisusb_is_inactive(c, sisusb)) { + up(&sisusb->lock); + return; + } + + sisusb_copy_memory(sisusb, (char *)SISUSB_VADDR(x, y), + (u32)SISUSB_HADDR(x, y), count * 2, &written); + + up(&sisusb->lock); +} + +/* Interface routine */ +static void +sisusbcon_clear(struct vc_data *c, int y, int x, int height, int width) +{ + struct sisusb_usb_data *sisusb; + u16 eattr = c->vc_video_erase_char; + ssize_t written; + int i, length, cols; + u16 *dest; + + if (width <= 0 || height <= 0) + return; + + if (!(sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num))) + return; + + /* sisusb->lock is down */ + + /* Need to clear buffer ourselves, because the vt does + * this AFTER calling us. + */ + + dest = SISUSB_VADDR(x, y); + + cols = sisusb->sisusb_num_columns; + + if (width > cols) + width = cols; + + if (x == 0 && width >= c->vc_cols) { + + sisusbcon_memsetw(dest, eattr, height * cols * 2); + + } else { + + for (i = height; i > 0; i--, dest += cols) + sisusbcon_memsetw(dest, eattr, width * 2); + + } + + if (sisusb_is_inactive(c, sisusb)) { + up(&sisusb->lock); + return; + } + + length = ((height * cols) - x - (cols - width - x)) * 2; + + + sisusb_copy_memory(sisusb, (unsigned char *)SISUSB_VADDR(x, y), + (u32)SISUSB_HADDR(x, y), length, &written); + + up(&sisusb->lock); +} + +/* Interface routine */ +static void +sisusbcon_bmove(struct vc_data *c, int sy, int sx, + int dy, int dx, int height, int width) +{ + struct sisusb_usb_data *sisusb; + ssize_t written; + int cols, length; +#if 0 + u16 *src, *dest; + int i; +#endif + + if (width <= 0 || height <= 0) + return; + + if (!(sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num))) + return; + + /* sisusb->lock is down */ + + cols = sisusb->sisusb_num_columns; + + /* Don't need to move data outselves, because + * vt does this BEFORE calling us. + * This is only used by vt's insert/deletechar. + */ +#if 0 + if (sx == 0 && dx == 0 && width >= c->vc_cols && width <= cols) { + + sisusbcon_memmovew(SISUSB_VADDR(0, dy), SISUSB_VADDR(0, sy), + height * width * 2); + + } else if (dy < sy || (dy == sy && dx < sx)) { + + src = SISUSB_VADDR(sx, sy); + dest = SISUSB_VADDR(dx, dy); + + for (i = height; i > 0; i--) { + sisusbcon_memmovew(dest, src, width * 2); + src += cols; + dest += cols; + } + + } else { + + src = SISUSB_VADDR(sx, sy + height - 1); + dest = SISUSB_VADDR(dx, dy + height - 1); + + for (i = height; i > 0; i--) { + sisusbcon_memmovew(dest, src, width * 2); + src -= cols; + dest -= cols; + } + + } +#endif + + if (sisusb_is_inactive(c, sisusb)) { + up(&sisusb->lock); + return; + } + + length = ((height * cols) - dx - (cols - width - dx)) * 2; + + + sisusb_copy_memory(sisusb, (unsigned char *)SISUSB_VADDR(dx, dy), + (u32)SISUSB_HADDR(dx, dy), length, &written); + + up(&sisusb->lock); +} + +/* interface routine */ +static int +sisusbcon_switch(struct vc_data *c) +{ + struct sisusb_usb_data *sisusb; + ssize_t written; + int length; + + /* Returnvalue 0 means we have fully restored screen, + * and vt doesn't need to call do_update_region(). + * Returnvalue != 0 naturally means the opposite. + */ + + if (!(sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num))) + return 0; + + /* sisusb->lock is down */ + + /* Don't write to screen if in gfx mode */ + if (sisusb_is_inactive(c, sisusb)) { + up(&sisusb->lock); + return 0; + } + + /* That really should not happen. It would mean we are + * being called while the vc is using its private buffer + * as origin. + */ + if (c->vc_origin == (unsigned long)c->vc_screenbuf) { + up(&sisusb->lock); + printk(KERN_DEBUG "sisusb: ASSERT ORIGIN != SCREENBUF!\n"); + return 0; + } + + /* Check that we don't copy too much */ + length = min((int)c->vc_screenbuf_size, + (int)(sisusb->scrbuf + sisusb->scrbuf_size - c->vc_origin)); + + /* Restore the screen contents */ + sisusbcon_memcpyw((u16 *)c->vc_origin, (u16 *)c->vc_screenbuf, + length); + + sisusb_copy_memory(sisusb, (unsigned char *)c->vc_origin, + (u32)SISUSB_HADDR(0, 0), + length, &written); + + up(&sisusb->lock); + + return 0; +} + +/* interface routine */ +static void +sisusbcon_save_screen(struct vc_data *c) +{ + struct sisusb_usb_data *sisusb; + int length; + + /* Save the current screen contents to vc's private + * buffer. + */ + + if (!(sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num))) + return; + + /* sisusb->lock is down */ + + if (sisusb_is_inactive(c, sisusb)) { + up(&sisusb->lock); + return; + } + + /* Check that we don't copy too much */ + length = min((int)c->vc_screenbuf_size, + (int)(sisusb->scrbuf + sisusb->scrbuf_size - c->vc_origin)); + + /* Save the screen contents to vc's private buffer */ + sisusbcon_memcpyw((u16 *)c->vc_screenbuf, (u16 *)c->vc_origin, + length); + + up(&sisusb->lock); +} + +/* interface routine */ +static int +sisusbcon_set_palette(struct vc_data *c, unsigned char *table) +{ + struct sisusb_usb_data *sisusb; + int i, j; + + /* Return value not used by vt */ + + if (!CON_IS_VISIBLE(c)) + return -EINVAL; + + if (!(sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num))) + return -EINVAL; + + /* sisusb->lock is down */ + + if (sisusb_is_inactive(c, sisusb)) { + up(&sisusb->lock); + return -EINVAL; + } + + for (i = j = 0; i < 16; i++) { + if (sisusb_setreg(sisusb, SISCOLIDX, table[i])) + break; + if (sisusb_setreg(sisusb, SISCOLDATA, c->vc_palette[j++] >> 2)) + break; + if (sisusb_setreg(sisusb, SISCOLDATA, c->vc_palette[j++] >> 2)) + break; + if (sisusb_setreg(sisusb, SISCOLDATA, c->vc_palette[j++] >> 2)) + break; + } + + up(&sisusb->lock); + + return 0; +} + +/* interface routine */ +static int +sisusbcon_blank(struct vc_data *c, int blank, int mode_switch) +{ + struct sisusb_usb_data *sisusb; + u8 sr1, cr17, pmreg, cr63; + ssize_t written; + int ret = 0; + + if (!(sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num))) + return 0; + + /* sisusb->lock is down */ + + if (mode_switch) + sisusb->is_gfx = blank ? 1 : 0; + + if (sisusb_is_inactive(c, sisusb)) { + up(&sisusb->lock); + return 0; + } + + switch (blank) { + + case 1: /* Normal blanking: Clear screen */ + case -1: + sisusbcon_memsetw((u16 *)c->vc_origin, + c->vc_video_erase_char, + c->vc_screenbuf_size); + sisusb_copy_memory(sisusb, + (unsigned char *)c->vc_origin, + (u32)(sisusb->vrambase + + (c->vc_origin - sisusb->scrbuf)), + c->vc_screenbuf_size, &written); + sisusb->con_blanked = 1; + ret = 1; + break; + + default: /* VESA blanking */ + switch (blank) { + case 0: /* Unblank */ + sr1 = 0x00; + cr17 = 0x80; + pmreg = 0x00; + cr63 = 0x00; + ret = 1; + sisusb->con_blanked = 0; + break; + case VESA_VSYNC_SUSPEND + 1: + sr1 = 0x20; + cr17 = 0x80; + pmreg = 0x80; + cr63 = 0x40; + break; + case VESA_HSYNC_SUSPEND + 1: + sr1 = 0x20; + cr17 = 0x80; + pmreg = 0x40; + cr63 = 0x40; + break; + case VESA_POWERDOWN + 1: + sr1 = 0x20; + cr17 = 0x00; + pmreg = 0xc0; + cr63 = 0x40; + break; + default: + up(&sisusb->lock); + return -EINVAL; + } + + sisusb_setidxregandor(sisusb, SISSR, 0x01, ~0x20, sr1); + sisusb_setidxregandor(sisusb, SISCR, 0x17, 0x7f, cr17); + sisusb_setidxregandor(sisusb, SISSR, 0x1f, 0x3f, pmreg); + sisusb_setidxregandor(sisusb, SISCR, 0x63, 0xbf, cr63); + + } + + up(&sisusb->lock); + + return ret; +} + +/* interface routine */ +static int +sisusbcon_scrolldelta(struct vc_data *c, int lines) +{ + struct sisusb_usb_data *sisusb; + int margin = c->vc_size_row * 4; + int ul, we, p, st; + + /* The return value does not seem to be used */ + + if (!(sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num))) + return 0; + + /* sisusb->lock is down */ + + if (sisusb_is_inactive(c, sisusb)) { + up(&sisusb->lock); + return 0; + } + + if (!lines) /* Turn scrollback off */ + c->vc_visible_origin = c->vc_origin; + else { + + if (sisusb->con_rolled_over > + (c->vc_scr_end - sisusb->scrbuf) + margin) { + + ul = c->vc_scr_end - sisusb->scrbuf; + we = sisusb->con_rolled_over + c->vc_size_row; + + } else { + + ul = 0; + we = sisusb->scrbuf_size; + + } + + p = (c->vc_visible_origin - sisusb->scrbuf - ul + we) % we + + lines * c->vc_size_row; + + st = (c->vc_origin - sisusb->scrbuf - ul + we) % we; + + if (st < 2 * margin) + margin = 0; + + if (p < margin) + p = 0; + + if (p > st - margin) + p = st; + + c->vc_visible_origin = sisusb->scrbuf + (p + ul) % we; + } + + sisusbcon_set_start_address(sisusb, c); + + up(&sisusb->lock); + + return 1; +} + +/* Interface routine */ +static void +sisusbcon_cursor(struct vc_data *c, int mode) +{ + struct sisusb_usb_data *sisusb; + int from, to, baseline; + + if (!(sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num))) + return; + + /* sisusb->lock is down */ + + if (sisusb_is_inactive(c, sisusb)) { + up(&sisusb->lock); + return; + } + + if (c->vc_origin != c->vc_visible_origin) { + c->vc_visible_origin = c->vc_origin; + sisusbcon_set_start_address(sisusb, c); + } + + if (mode == CM_ERASE) { + sisusb_setidxregor(sisusb, SISCR, 0x0a, 0x20); + sisusb->sisusb_cursor_size_to = -1; + up(&sisusb->lock); + return; + } + + sisusb_set_cursor(sisusb, (c->vc_pos - sisusb->scrbuf) / 2); + + baseline = c->vc_font.height - (c->vc_font.height < 10 ? 1 : 2); + + switch (c->vc_cursor_type & 0x0f) { + case CUR_BLOCK: from = 1; + to = c->vc_font.height; + break; + case CUR_TWO_THIRDS: from = c->vc_font.height / 3; + to = baseline; + break; + case CUR_LOWER_HALF: from = c->vc_font.height / 2; + to = baseline; + break; + case CUR_LOWER_THIRD: from = (c->vc_font.height * 2) / 3; + to = baseline; + break; + case CUR_NONE: from = 31; + to = 30; + break; + default: + case CUR_UNDERLINE: from = baseline - 1; + to = baseline; + break; + } + + if (sisusb->sisusb_cursor_size_from != from || + sisusb->sisusb_cursor_size_to != to) { + + sisusb_setidxreg(sisusb, SISCR, 0x0a, from); + sisusb_setidxregandor(sisusb, SISCR, 0x0b, 0xe0, to); + + sisusb->sisusb_cursor_size_from = from; + sisusb->sisusb_cursor_size_to = to; + } + + up(&sisusb->lock); +} + +static int +sisusbcon_scroll_area(struct vc_data *c, struct sisusb_usb_data *sisusb, + int t, int b, int dir, int lines) +{ + int cols = sisusb->sisusb_num_columns; + int length = ((b - t) * cols) * 2; + u16 eattr = c->vc_video_erase_char; + ssize_t written; + + /* sisusb->lock is down */ + + /* Scroll an area which does not match the + * visible screen's dimensions. This needs + * to be done separately, as it does not + * use hardware panning. + */ + + switch (dir) { + + case SM_UP: + sisusbcon_memmovew(SISUSB_VADDR(0, t), + SISUSB_VADDR(0, t + lines), + (b - t - lines) * cols * 2); + sisusbcon_memsetw(SISUSB_VADDR(0, b - lines), eattr, + lines * cols * 2); + break; + + case SM_DOWN: + sisusbcon_memmovew(SISUSB_VADDR(0, t + lines), + SISUSB_VADDR(0, t), + (b - t - lines) * cols * 2); + sisusbcon_memsetw(SISUSB_VADDR(0, t), eattr, + lines * cols * 2); + break; + } + + sisusb_copy_memory(sisusb, (char *)SISUSB_VADDR(0, t), + (u32)SISUSB_HADDR(0, t), length, &written); + + up(&sisusb->lock); + + return 1; +} + +/* Interface routine */ +static int +sisusbcon_scroll(struct vc_data *c, int t, int b, int dir, int lines) +{ + struct sisusb_usb_data *sisusb; + u16 eattr = c->vc_video_erase_char; + ssize_t written; + int copyall = 0; + unsigned long oldorigin; + unsigned int delta = lines * c->vc_size_row; + u32 originoffset; + + /* Returning != 0 means we have done the scrolling successfully. + * Returning 0 makes vt do the scrolling on its own. + * Note that con_scroll is only called if the console is + * visible. In that case, the origin should be our buffer, + * not the vt's private one. + */ + + if (!lines) + return 1; + + if (!(sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num))) + return 0; + + /* sisusb->lock is down */ + + if (sisusb_is_inactive(c, sisusb)) { + up(&sisusb->lock); + return 0; + } + + /* Special case */ + if (t || b != c->vc_rows) + return sisusbcon_scroll_area(c, sisusb, t, b, dir, lines); + + if (c->vc_origin != c->vc_visible_origin) { + c->vc_visible_origin = c->vc_origin; + sisusbcon_set_start_address(sisusb, c); + } + + /* limit amount to maximum realistic size */ + if (lines > c->vc_rows) + lines = c->vc_rows; + + oldorigin = c->vc_origin; + + switch (dir) { + + case SM_UP: + + if (c->vc_scr_end + delta >= + sisusb->scrbuf + sisusb->scrbuf_size) { + sisusbcon_memcpyw((u16 *)sisusb->scrbuf, + (u16 *)(oldorigin + delta), + c->vc_screenbuf_size - delta); + c->vc_origin = sisusb->scrbuf; + sisusb->con_rolled_over = oldorigin - sisusb->scrbuf; + copyall = 1; + } else + c->vc_origin += delta; + + sisusbcon_memsetw( + (u16 *)(c->vc_origin + c->vc_screenbuf_size - delta), + eattr, delta); + + break; + + case SM_DOWN: + + if (oldorigin - delta < sisusb->scrbuf) { + sisusbcon_memmovew((u16 *)(sisusb->scrbuf + + sisusb->scrbuf_size - + c->vc_screenbuf_size + + delta), + (u16 *)oldorigin, + c->vc_screenbuf_size - delta); + c->vc_origin = sisusb->scrbuf + + sisusb->scrbuf_size - + c->vc_screenbuf_size; + sisusb->con_rolled_over = 0; + copyall = 1; + } else + c->vc_origin -= delta; + + c->vc_scr_end = c->vc_origin + c->vc_screenbuf_size; + + scr_memsetw((u16 *)(c->vc_origin), eattr, delta); + + break; + } + + originoffset = (u32)(c->vc_origin - sisusb->scrbuf); + + if (copyall) + sisusb_copy_memory(sisusb, + (char *)c->vc_origin, + (u32)(sisusb->vrambase + originoffset), + c->vc_screenbuf_size, &written); + else if (dir == SM_UP) + sisusb_copy_memory(sisusb, + (char *)c->vc_origin + c->vc_screenbuf_size - delta, + (u32)sisusb->vrambase + originoffset + + c->vc_screenbuf_size - delta, + delta, &written); + else + sisusb_copy_memory(sisusb, + (char *)c->vc_origin, + (u32)(sisusb->vrambase + originoffset), + delta, &written); + + c->vc_scr_end = c->vc_origin + c->vc_screenbuf_size; + c->vc_visible_origin = c->vc_origin; + + sisusbcon_set_start_address(sisusb, c); + + c->vc_pos = c->vc_pos - oldorigin + c->vc_origin; + + up(&sisusb->lock); + + return 1; +} + +/* Interface routine */ +static int +sisusbcon_set_origin(struct vc_data *c) +{ + struct sisusb_usb_data *sisusb; + + /* Returning != 0 means we were successful. + * Returning 0 will vt make to use its own + * screenbuffer as the origin. + */ + + if (!(sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num))) + return 0; + + /* sisusb->lock is down */ + + if (sisusb_is_inactive(c, sisusb) || sisusb->con_blanked) { + up(&sisusb->lock); + return 0; + } + + c->vc_origin = c->vc_visible_origin = sisusb->scrbuf; + + sisusbcon_set_start_address(sisusb, c); + + sisusb->con_rolled_over = 0; + + up(&sisusb->lock); + + return 1; +} + +/* Interface routine */ +static int +sisusbcon_resize(struct vc_data *c, unsigned int newcols, unsigned int newrows) +{ + struct sisusb_usb_data *sisusb; + int fh; + + if (!(sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num))) + return -ENODEV; + + fh = sisusb->current_font_height; + + up(&sisusb->lock); + + /* We are quite unflexible as regards resizing. The vt code + * handles sizes where the line length isn't equal the pitch + * quite badly. As regards the rows, our panning tricks only + * work well if the number of rows equals the visible number + * of rows. + */ + + if (newcols != 80 || c->vc_scan_lines / fh != newrows) + return -EINVAL; + + return 0; +} + +int +sisusbcon_do_font_op(struct sisusb_usb_data *sisusb, int set, int slot, + u8 *arg, int cmapsz, int ch512, int dorecalc, + struct vc_data *c, int fh, int uplock) +{ + int font_select = 0x00, i, err = 0; + u32 offset = 0; + u8 dummy; + + /* sisusb->lock is down */ + + /* + * The default font is kept in slot 0. + * A user font is loaded in slot 2 (256 ch) + * or 2+3 (512 ch). + */ + + if ((slot != 0 && slot != 2) || !fh) { + if (uplock) + up(&sisusb->lock); + return -EINVAL; + } + + if (set) + sisusb->font_slot = slot; + + /* Default font is always 256 */ + if (slot == 0) + ch512 = 0; + else + offset = 4 * cmapsz; + + font_select = (slot == 0) ? 0x00 : (ch512 ? 0x0e : 0x0a); + + err |= sisusb_setidxreg(sisusb, SISSR, 0x00, 0x01); /* Reset */ + err |= sisusb_setidxreg(sisusb, SISSR, 0x02, 0x04); /* Write to plane 2 */ + err |= sisusb_setidxreg(sisusb, SISSR, 0x04, 0x07); /* Memory mode a0-bf */ + err |= sisusb_setidxreg(sisusb, SISSR, 0x00, 0x03); /* Reset */ + + if (err) + goto font_op_error; + + err |= sisusb_setidxreg(sisusb, SISGR, 0x04, 0x03); /* Select plane read 2 */ + err |= sisusb_setidxreg(sisusb, SISGR, 0x05, 0x00); /* Disable odd/even */ + err |= sisusb_setidxreg(sisusb, SISGR, 0x06, 0x00); /* Address range a0-bf */ + + if (err) + goto font_op_error; + + if (arg) { + if (set) + for (i = 0; i < cmapsz; i++) { + err |= sisusb_writeb(sisusb, + sisusb->vrambase + offset + i, + arg[i]); + if (err) + break; + } + else + for (i = 0; i < cmapsz; i++) { + err |= sisusb_readb(sisusb, + sisusb->vrambase + offset + i, + &arg[i]); + if (err) + break; + } + + /* + * In 512-character mode, the character map is not contiguous if + * we want to remain EGA compatible -- which we do + */ + + if (ch512) { + if (set) + for (i = 0; i < cmapsz; i++) { + err |= sisusb_writeb(sisusb, + sisusb->vrambase + offset + + (2 * cmapsz) + i, + arg[cmapsz + i]); + if (err) + break; + } + else + for (i = 0; i < cmapsz; i++) { + err |= sisusb_readb(sisusb, + sisusb->vrambase + offset + + (2 * cmapsz) + i, + &arg[cmapsz + i]); + if (err) + break; + } + } + } + + if (err) + goto font_op_error; + + err |= sisusb_setidxreg(sisusb, SISSR, 0x00, 0x01); /* Reset */ + err |= sisusb_setidxreg(sisusb, SISSR, 0x02, 0x03); /* Write to planes 0+1 */ + err |= sisusb_setidxreg(sisusb, SISSR, 0x04, 0x03); /* Memory mode a0-bf */ + if (set) + sisusb_setidxreg(sisusb, SISSR, 0x03, font_select); + err |= sisusb_setidxreg(sisusb, SISSR, 0x00, 0x03); /* Reset end */ + + if (err) + goto font_op_error; + + err |= sisusb_setidxreg(sisusb, SISGR, 0x04, 0x00); /* Select plane read 0 */ + err |= sisusb_setidxreg(sisusb, SISGR, 0x05, 0x10); /* Enable odd/even */ + err |= sisusb_setidxreg(sisusb, SISGR, 0x06, 0x06); /* Address range b8-bf */ + + if (err) + goto font_op_error; + + if ((set) && (ch512 != sisusb->current_font_512)) { + + /* Font is shared among all our consoles. + * And so is the hi_font_mask. + */ + for (i = 0; i < MAX_NR_CONSOLES; i++) { + struct vc_data *c = vc_cons[i].d; + if (c && c->vc_sw == &sisusb_con) + c->vc_hi_font_mask = ch512 ? 0x0800 : 0; + } + + sisusb->current_font_512 = ch512; + + /* color plane enable register: + 256-char: enable intensity bit + 512-char: disable intensity bit */ + sisusb_getreg(sisusb, SISINPSTAT, &dummy); + sisusb_setreg(sisusb, SISAR, 0x12); + sisusb_setreg(sisusb, SISAR, ch512 ? 0x07 : 0x0f); + + sisusb_getreg(sisusb, SISINPSTAT, &dummy); + sisusb_setreg(sisusb, SISAR, 0x20); + sisusb_getreg(sisusb, SISINPSTAT, &dummy); + } + + if (dorecalc) { + + /* + * Adjust the screen to fit a font of a certain height + */ + + unsigned char ovr, vde, fsr; + int rows = 0, maxscan = 0; + + if (c) { + + /* Number of video rows */ + rows = c->vc_scan_lines / fh; + /* Scan lines to actually display-1 */ + maxscan = rows * fh - 1; + + /*printk(KERN_DEBUG "sisusb recalc rows %d maxscan %d fh %d sl %d\n", + rows, maxscan, fh, c->vc_scan_lines);*/ + + sisusb_getidxreg(sisusb, SISCR, 0x07, &ovr); + vde = maxscan & 0xff; + ovr = (ovr & 0xbd) | + ((maxscan & 0x100) >> 7) | + ((maxscan & 0x200) >> 3); + sisusb_setidxreg(sisusb, SISCR, 0x07, ovr); + sisusb_setidxreg(sisusb, SISCR, 0x12, vde); + + } + + sisusb_getidxreg(sisusb, SISCR, 0x09, &fsr); + fsr = (fsr & 0xe0) | (fh - 1); + sisusb_setidxreg(sisusb, SISCR, 0x09, fsr); + sisusb->current_font_height = fh; + + sisusb->sisusb_cursor_size_from = -1; + sisusb->sisusb_cursor_size_to = -1; + + } + + if (uplock) + up(&sisusb->lock); + + if (dorecalc && c) { + int i, rows = c->vc_scan_lines / fh; + + /* Now adjust our consoles' size */ + + for (i = 0; i < MAX_NR_CONSOLES; i++) { + struct vc_data *vc = vc_cons[i].d; + + if (vc && vc->vc_sw == &sisusb_con) { + if (CON_IS_VISIBLE(vc)) { + vc->vc_sw->con_cursor(vc, CM_DRAW); + } + vc->vc_font.height = fh; + vc_resize(vc, 0, rows); + } + } + } + + return 0; + +font_op_error: + if (uplock) + up(&sisusb->lock); + + return -EIO; +} + +/* Interface routine */ +static int +sisusbcon_font_set(struct vc_data *c, struct console_font *font, + unsigned flags) +{ + struct sisusb_usb_data *sisusb; + unsigned charcount = font->charcount; + + if (font->width != 8 || (charcount != 256 && charcount != 512)) + return -EINVAL; + + if (!(sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num))) + return -ENODEV; + + /* sisusb->lock is down */ + + /* Save the user-provided font into a buffer. This + * is used for restoring text mode after quitting + * from X and for the con_getfont routine. + */ + if (sisusb->font_backup) { + if (sisusb->font_backup_size < charcount) { + vfree(sisusb->font_backup); + sisusb->font_backup = NULL; + } + } + + if (!sisusb->font_backup) + sisusb->font_backup = vmalloc(charcount * 32); + + if (sisusb->font_backup) { + memcpy(sisusb->font_backup, font->data, charcount * 32); + sisusb->font_backup_size = charcount; + sisusb->font_backup_height = font->height; + sisusb->font_backup_512 = (charcount == 512) ? 1 : 0; + } + + /* do_font_op ups sisusb->lock */ + + return sisusbcon_do_font_op(sisusb, 1, 2, font->data, + 8192, (charcount == 512), + (!(flags & KD_FONT_FLAG_DONT_RECALC)) ? 1 : 0, + c, font->height, 1); +} + +/* Interface routine */ +static int +sisusbcon_font_get(struct vc_data *c, struct console_font *font) +{ + struct sisusb_usb_data *sisusb; + + if (!(sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num))) + return -ENODEV; + + /* sisusb->lock is down */ + + font->width = 8; + font->height = c->vc_font.height; + font->charcount = 256; + + if (!font->data) { + up(&sisusb->lock); + return 0; + } + + if (!sisusb->font_backup) { + up(&sisusb->lock); + return -ENODEV; + } + + /* Copy 256 chars only, like vgacon */ + memcpy(font->data, sisusb->font_backup, 256 * 32); + + up(&sisusb->lock); + + return 0; +} + +/* + * The console `switch' structure for the sisusb console + */ + +static const struct consw sisusb_con = { + .owner = THIS_MODULE, + .con_startup = sisusbcon_startup, + .con_init = sisusbcon_init, + .con_deinit = sisusbcon_deinit, + .con_clear = sisusbcon_clear, + .con_putc = sisusbcon_putc, + .con_putcs = sisusbcon_putcs, + .con_cursor = sisusbcon_cursor, + .con_scroll = sisusbcon_scroll, + .con_bmove = sisusbcon_bmove, + .con_switch = sisusbcon_switch, + .con_blank = sisusbcon_blank, + .con_font_set = sisusbcon_font_set, + .con_font_get = sisusbcon_font_get, + .con_set_palette = sisusbcon_set_palette, + .con_scrolldelta = sisusbcon_scrolldelta, + .con_build_attr = sisusbcon_build_attr, + .con_invert_region = sisusbcon_invert_region, + .con_set_origin = sisusbcon_set_origin, + .con_save_screen = sisusbcon_save_screen, + .con_resize = sisusbcon_resize, +}; + +/* Our very own dummy console driver */ + +static const char *sisusbdummycon_startup(void) +{ + return "SISUSBVGADUMMY"; +} + +static void sisusbdummycon_init(struct vc_data *vc, int init) +{ + vc->vc_can_do_color = 1; + if (init) { + vc->vc_cols = 80; + vc->vc_rows = 25; + } else + vc_resize(vc, 80, 25); +} + +static int sisusbdummycon_dummy(void) +{ + return 0; +} + +#define SISUSBCONDUMMY (void *)sisusbdummycon_dummy + +const struct consw sisusb_dummy_con = { + .owner = THIS_MODULE, + .con_startup = sisusbdummycon_startup, + .con_init = sisusbdummycon_init, + .con_deinit = SISUSBCONDUMMY, + .con_clear = SISUSBCONDUMMY, + .con_putc = SISUSBCONDUMMY, + .con_putcs = SISUSBCONDUMMY, + .con_cursor = SISUSBCONDUMMY, + .con_scroll = SISUSBCONDUMMY, + .con_bmove = SISUSBCONDUMMY, + .con_switch = SISUSBCONDUMMY, + .con_blank = SISUSBCONDUMMY, + .con_font_set = SISUSBCONDUMMY, + .con_font_get = SISUSBCONDUMMY, + .con_font_default = SISUSBCONDUMMY, + .con_font_copy = SISUSBCONDUMMY, + .con_set_palette = SISUSBCONDUMMY, + .con_scrolldelta = SISUSBCONDUMMY, +}; + +int +sisusb_console_init(struct sisusb_usb_data *sisusb, int first, int last) +{ + int i, ret, minor = sisusb->minor; + + down(&disconnect_sem); + + down(&sisusb->lock); + + /* Erm.. that should not happen */ + if (sisusb->haveconsole || !sisusb->SiS_Pr) { + up(&sisusb->lock); + up(&disconnect_sem); + return 1; + } + + sisusb->con_first = first; + sisusb->con_last = last; + + if (first > last || + first > MAX_NR_CONSOLES || + last > MAX_NR_CONSOLES) { + up(&sisusb->lock); + up(&disconnect_sem); + return 1; + } + + /* If gfxcore not initialized or no consoles given, quit graciously */ + if (!sisusb->gfxinit || first < 1 || last < 1) { + up(&sisusb->lock); + up(&disconnect_sem); + return 0; + } + + sisusb->sisusb_cursor_loc = -1; + sisusb->sisusb_cursor_size_from = -1; + sisusb->sisusb_cursor_size_to = -1; + + /* Set up text mode (and upload default font) */ + if (sisusb_reset_text_mode(sisusb, 1)) { + up(&sisusb->lock); + up(&disconnect_sem); + printk(KERN_ERR + "sisusbvga[%d]: Failed to set up text mode\n", + minor); + return 1; + } + + /* Initialize some gfx registers */ + sisusb_initialize(sisusb); + + for (i = first - 1; i <= last - 1; i++) { + /* Save sisusb for our interface routines */ + mysisusbs[i] = sisusb; + } + + /* Initial console setup */ + sisusb->sisusb_num_columns = 80; + + /* Use a 32K buffer (matches b8000-bffff area) */ + sisusb->scrbuf_size = 32 * 1024; + + /* Allocate screen buffer */ + if (!(sisusb->scrbuf = (unsigned long)vmalloc(sisusb->scrbuf_size))) { + up(&sisusb->lock); + up(&disconnect_sem); + printk(KERN_ERR + "sisusbvga[%d]: Failed to allocate screen buffer\n", + minor); + return 1; + } + + up(&sisusb->lock); + up(&disconnect_sem); + + /* Now grab the desired console(s) */ + ret = take_over_console(&sisusb_con, first - 1, last - 1, 0); + + if (!ret) + sisusb->haveconsole = 1; + else { + for (i = first - 1; i <= last - 1; i++) + mysisusbs[i] = NULL; + } + + return ret; +} + +void +sisusb_console_exit(struct sisusb_usb_data *sisusb) +{ + int i; + + /* This is called if the device is disconnected + * and while disconnect and lock semaphores + * are up. This should be save because we + * can't lose our sisusb any other way but by + * disconnection (and hence, the disconnect + * sema is for protecting all other access + * functions from disconnection, not the + * other way round). + */ + + /* Now what do we do in case of disconnection: + * One alternative would be to simply call + * give_up_console(). Nah, not a good idea. + * give_up_console() is obviously buggy as it + * only discards the consw pointer from the + * driver_map, but doesn't adapt vc->vc_sw + * of the affected consoles. Hence, the next + * call to any of the console functions will + * eventually take a trip to oops county. + * Also, give_up_console for some reason + * doesn't decrement our module refcount. + * Instead, we switch our consoles to a private + * dummy console. This, of course, keeps our + * refcount up as well, but it works perfectly. + */ + + if (sisusb->haveconsole) { + for (i = 0; i < MAX_NR_CONSOLES; i++) + if (sisusb->havethisconsole[i]) + take_over_console(&sisusb_dummy_con, i, i, 0); + /* At this point, con_deinit for all our + * consoles is executed by take_over_console(). + */ + sisusb->haveconsole = 0; + } + + vfree((void *)sisusb->scrbuf); + sisusb->scrbuf = 0; + + vfree(sisusb->font_backup); + sisusb->font_backup = NULL; +} + +void __init sisusb_init_concode(void) +{ + int i; + + for (i = 0; i < MAX_NR_CONSOLES; i++) + mysisusbs[i] = NULL; +} + +#endif /* INCL_CON */ + + + |
